Last modified by kai on 2024/09/06 10:00
<
From version < 38.79 >
edited by Xiaoling
on 2022/05/31 09:19
To version < 10.1 >
edited by Xiaoling
on 2022/05/11 11:51
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,9 +1,8 @@
1 - **Contents：**
1 +Contens
2 2  
3 3  {{toc/}}
4 4  
5 5  
6 -
7 7  = 1. Introduction =
8 8  
9 9  Dragino LoRaWAN End Node support two types of AT Commands and Downlink Commands:
... ... @@ -11,95 +11,34 @@
11 11  * **Common Commands:** They should be available for each sensor, such as: change uplink interval, reset device.
12 12  * **Sensor Related Commands:** Only for special sensor, such as control relay, poll RS485 device.
13 13  
14 -(((
15 15  **This page shows the common commands since Dragino LoRaWAN stack DR-LWS-005. Make sure the end node support stack higher than DR-LWS-005 before checking this page.**
16 16  
17 -)))
18 18  
19 19  = 2. How to use AT Commands or Downlink command =
20 20  
21 21  * For AT Command , See Devices User Manual for Device. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
22 22  * For LoRaWAN Downlink: The gateway transfer downlink command in HEX format. This page shows the HEX format downlink code for each command. but some servers use base64 as downlink code. Below are reference for how to use downlink command:
23 -** Use HEX format to send a downlink: [[TTN v3>>Notes for TTN]]
24 -** Use Base64 format to send a downlink: [[Chirpstack>>Notes for ChirpStack]]
25 -** See use note for more serves [[Servers Note>>doc:Main.WebHome]](IoT LoRaWAN Server)
20 +** Use HEX format to send a downlink: [[TTN v3>>url:https://wiki.dragino.com/index.php/Notes_for_TTN#Send_Downlink_message]]
21 +** Use Base64 format to send a downlink: [[Chirpstack>>url:https://wiki.dragino.com/index.php/Notes_for_ChirpStack#Downlink]].
22 +** See use note for more serves [[Servers Note>>url:https://wiki.dragino.com/index.php/Main_Page#Use_Note_for_Server]]
26 26  
27 -
28 -
29 29  = 3. Support End Node and firmware version =
30 30  
31 -(% border="1" style="background-color:#ffffcc; color:green; width:966px" %)
32 -|=(% colspan="3" style="width: 963px;" %)(((
33 -Dragino STM32 base hardware Firmware / LoRaWAN stack list
34 -)))
35 -|(% style="width:187px" %)(((
36 -**Model**
37 -)))|(% style="width:330px" %)(((
38 -**Description**
39 -)))|(% style="width:445px" %)(((
40 -**Firmware Version <~-~-> Stack Version**
41 -)))
42 -|(% style="width:187px" %)(((
43 -[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],
44 -)))|(% style="width:330px" %)(((
45 -Open Source Generic LoRaWAN Sensor Node
46 -)))|(% style="width:445px" %)(((
47 -(((
48 -LSN50 v1.6.0 <~-~-> DR-LWS-003;
49 -)))
50 -
51 -(((
52 -(((
26 +(% style="background-color:#ffffcc; border:1; color:green; width:995.222px" %)
27 +|=(% colspan="3" style="width: 992px;" %)Dragino STM32 base hardware Firmware / LoRaWAN stack list
28 +|(% style="width:187px" %)**Model**|(% style="width:349px" %)**Description**|(% style="width:453px" %)**Firmware Version <~-~-> Stack Version**
29 +|(% style="width:187px" %)[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],|(% style="width:349px" %)Open Source Generic LoRaWAN Sensor Node|(% style="width:453px" %)LSN50 v1.6.0 <~-~-> DR-LWS-003;(((
53 53  LSN50 v1.7.0 <~-~-> DR-LWS-005; ~-~-> Support since this version
54 54  )))
55 -)))
56 -)))
57 -|(% style="width:187px" %)(((
58 -[[LGT92>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/142-lgt-92.html]],
59 -)))|(% style="width:330px" %)(((
60 -LoRaWAN GPS Tracker
61 -)))|(% style="width:445px" %)(((
62 -(((
63 -LGT92 v1.6.3 <~-~-> DR-LWS-003;
64 -)))
65 -
66 -(((
67 -(((
32 +|(% style="width:187px" %)[[LGT92>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/142-lgt-92.html]],|(% style="width:349px" %)LoRaWAN GPS Tracker|(% style="width:453px" %)LGT92 v1.6.3 <~-~-> DR-LWS-003;(((
68 68  LGT92 v1.6.4 <~-~-> DR-LWS-005;~-~-> Support since this version
69 69  )))
70 -)))
71 -)))
72 -|(% style="width:187px" %)(((
73 -[[LBT1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/165-lbt1.html]],
74 -)))|(% style="width:330px" %)(((
75 -LoRaWAN BLE Indoor Tracker
76 -)))|(% style="width:445px" %)(((
77 -LBT1 v1.0 <~-~-> DR-LWS-005;
78 -)))
79 -|(% style="width:187px" %)(((
80 -[[RS485-LN>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/154-rs485-ln.html]],
81 -)))|(% style="width:330px" %)(((
82 -LoRaWAN RS485 Modbus Converter
83 -)))|(% style="width:445px" %)(((
84 -RS485-LN v1.3 <~-~-> DR-LWS-005;
85 -)))
86 -|(% style="width:187px" %)(((
87 -[[LHT65>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/151-lht65.html]],
88 -)))|(% style="width:330px" %)(((
89 -LoRaWAN Temperature & Humidity Sensor
90 -)))|(% style="width:445px" %)(((
91 -(((
92 -LHT65 v1.7 <~-~-> DR-LWS-003;
93 -)))
94 -
95 -(((
96 -(((
35 +|(% style="width:187px" %)[[LBT1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/165-lbt1.html]],|(% style="width:349px" %)LoRaWAN BLE Indoor Tracker|(% style="width:453px" %)LBT1 v1.0 <~-~-> DR-LWS-005;
36 +|(% style="width:187px" %)[[RS485-LN>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/154-rs485-ln.html]],|(% style="width:349px" %)LoRaWAN RS485 Modbus Converter|(% style="width:453px" %)RS485-LN v1.3 <~-~-> DR-LWS-005;
37 +|(% style="width:187px" %)[[LHT65>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/151-lht65.html]],|(% style="width:349px" %)LoRaWAN Temperature & Humidity Sensor|(% style="width:453px" %)LHT65 v1.7 <~-~-> DR-LWS-003;(((
97 97  LHT65 v1.8.0 <~-~-> DR-LWS-005;~-~-> Support since this version
98 98  )))
99 -)))
100 -)))
101 101  
102 -
103 103  = 4. System Management Commands =
104 104  
105 105  == 4.1 Change Uplink Interval ==
... ... @@ -111,7 +111,7 @@
111 111  **AT Command: AT+TDC**
112 112  )))
113 113  
114 -(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
52 +(% style="background-color:#ffffcc; color:green; width:727.222px" %)
115 115  |=(% colspan="3" style="width: 724px;" %)AT+TDC
116 116  |(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
117 117  |(% style="width:165px" %)AT+TDC=?|(% style="width:227px" %)Show current transmit Interval|(% style="width:329px" %)30000(((
... ... @@ -127,18 +127,13 @@
127 127  **Downlink Command: 0x01**
128 128  {{/info}}
129 129  
130 -(((
131 131  Format: Command Code (0x01) followed by 3 bytes time value.
132 -)))
133 133  
134 -(((
135 135  If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
136 -)))
137 137  
138 138  * **Example 1**: Downlink Payload:** 0100001E** ~/~/ Set Transmit Interval (TDC) = 30 seconds
139 139  * **Example 2**: Downlink Payload:** 0100003C** ~/~/ Set Transmit Interval (TDC) = 60 seconds
140 140  
141 -
142 142  == 4.2 Reboot End Node ==
143 143  
144 144  Feature: Reboot End Node to perform a new OTAA or ABP Join.
... ... @@ -147,7 +147,7 @@
147 147  **AT Command: ATZ**
148 148  {{/info}}
149 149  
150 -(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
83 +(% border="0" style="background-color:#ffffcc; color:green; width:727.222px" %)
151 151  |=(% colspan="3" %)ATZ: Trig a reset of the MCU
152 152  |**Command Example**|**Function**|**Response**
153 153  |ATZ|Reset MCU|(((
... ... @@ -168,16 +168,10 @@
168 168  **Downlink Command: 0x04**
169 169  {{/info}}
170 170  
171 -(((
172 172  Format: Command Code (0x04) followed by FF.
173 -)))
174 174  
175 -(((
176 176  If the downlink payload=**04FF**, the end node will reboot.
177 177  
178 -
179 -)))
180 -
181 181  == 4.3 Reset to factory Default ==
182 182  
183 183  Feature: Reset the parameters to Factory Default, factory default value depends on the firmware settings, the OTAA and ABP keys will reserve after this command.
... ... @@ -186,7 +186,7 @@
186 186  **AT Command: AT+FDR**
187 187  {{/info}}
188 188  
189 -(% border="1" style="background-color:#ffffcc; color:green; width:831.222px" %)
116 +(% style="background-color:#ffffcc; color:green; width:831.222px" %)
190 190  |=(% colspan="3" style="width: 828px;" %)Reset to factory default
191 191  |(% style="width:181px" %)**Command Example**|(% style="width:181px" %)**Function**|(% style="width:465px" %)**Response**
192 192  |(% style="width:181px" %)AT+FDR|(% style="width:181px" %)Reset to factory default|(% style="width:465px" %)(((
... ... @@ -207,13 +207,9 @@
207 207  **Downlink Command: 0x04**
208 208  {{/info}}
209 209  
210 -(((
211 211  Format: Command Code (0x04) followed by FE.
212 -)))
213 213  
214 -(((
215 215  If the downlink payload=**04FE**, Reset Parameters to Factory Default, Keys Reserve.
216 -)))
217 217  
218 218  
219 219  == 4.4 Show Firmware Version ==
... ... @@ -224,10 +224,10 @@
224 224  **AT Command: AT+VER**
225 225  {{/info}}
226 226  
227 -(% border="1" style="background-color:#ffffcc; color:green; width:586px" %)
228 -|=(% colspan="3" style="width: 583px;" %)AT+VER: Image Version and Frequency Band
229 -|(% style="width:170px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:113px" %)**Response**
230 -|(% style="width:170px" %)AT+VER=?|(% style="width:300px" %)Show Image version and Frequency Band|(% style="width:113px" %)(((
150 +(% style="background-color:#ffffcc; color:green" %)
151 +|=(% colspan="3" %)AT+VER: Image Version and Frequency Band
152 +|**Command Example**|**Function**|**Response**
153 +|AT+VER=?|Show Image version and Frequency Band|(((
231 231  1.3 EU868
232 232  
233 233  OK
... ... @@ -237,25 +237,17 @@
237 237  **Downlink Command: 0x26 (Valid in 006 stack)**
238 238  {{/info}}
239 239  
240 -(((
241 241  Downlink Format: 0x26
242 -)))
243 243  
244 -(((
245 245  Device will reply with firmware version info, device info. frequency band info. detail please check device user manual. Total 5 bytes Example: If device is of firmware version 1.1.0 Upload: xx ~-~- yy ~-~- zz ~-~- 110 total 5 bytes
246 -)))
247 247  
248 -(((
249 249  **xx: Software Type:**
250 -)))
251 251  
252 252  * 0x00 01: LGT92 Version
253 253  * 0x00 02: LBT1
254 254  * 0x00 03: LSE01/LDDS75/LDDS20/LSPH01/LLMS01/LSNPK01
255 255  
256 -(((
257 257  **yy: Frequency Band:**
258 -)))
259 259  
260 260  * 0x01: EU868
261 261  * 0x02: US915
... ... @@ -268,9 +268,7 @@
268 268  * 0x09: AS923-2
269 269  * 0xa0: AS923-3
270 270  
271 -(((
272 272  **zz: Subband**
273 -)))
274 274  
275 275  firmware version: v1.1.0 ~-~-> 110
276 276  
... ... @@ -283,7 +283,7 @@
283 283  **AT Command: AT+CFG**
284 284  {{/info}}
285 285  
286 -(% border="1" style="background-color:#ffffcc; color:green; width:599.222px" %)
199 +(% style="background-color:#ffffcc; color:green; width:599.222px" %)
287 287  |=(% colspan="3" style="width: 596px;" %)AT+CFG: Print all configurations
288 288  |(% style="width:160px" %)**Command Example**|(% style="width:154px" %)**Function**|(% style="width:280px" %)**Response**
289 289  |(% style="width:160px" %)AT+CFG|(% style="width:154px" %)Show all configures|(% style="width:280px" %)(((
... ... @@ -300,7 +300,6 @@
300 300  OK
301 301  )))
302 302  
303 -
304 304  = 5. Keys, IDs and EUIs management =
305 305  
306 306  == 5.1 Application EUI ==
... ... @@ -311,7 +311,7 @@
311 311  **AT Command: AT+APPEUI**
312 312  {{/info}}
313 313  
314 -(% border="1" style="background-color:#ffffcc; color:green; width:686.222px" %)
226 +(% style="background-color:#ffffcc; color:green; width:686.222px" %)
315 315  |=(% colspan="3" style="width: 683px;" %)AT+APPEUI
316 316  |(% style="width:305px" %)**Command Example**|(% style="width:186px" %)**Function**|(% style="width:191px" %)**Response**
317 317  |(% style="width:305px" %)AT+APPEUI=?|(% style="width:186px" %)Get the Application EUI|(% style="width:191px" %)00 b3 d5 00 00 00 00 00(((
... ... @@ -319,7 +319,6 @@
319 319  )))
320 320  |(% style="width:305px" %)AT+APPEUI=00 b3 d5 7e f0 00 4d 34|(% style="width:186px" %)Set the Application EUI|(% style="width:191px" %)OK
321 321  
322 -
323 323  == 5.2 Application Key ==
324 324  
325 325  Feature: Get or Set the Application Key.
... ... @@ -328,7 +328,7 @@
328 328  **AT Command: AT+APPKEY**
329 329  {{/info}}
330 330  
331 -(% border="1" style="background-color:#ffffcc; color:green; width:976.222px" %)
242 +(% style="background-color:#ffffcc; color:green; width:976.222px" %)
332 332  |=(% colspan="3" style="width: 973px;" %)AT+APPKEY
333 333  |(% style="width:441px" %)**Command Example**|(% style="width:180px" %)**Function**|(% style="width:350px" %)**Response**
334 334  |(% style="width:441px" %)AT+APPKEY=?|(% style="width:180px" %)Get the Application Key|(% style="width:350px" %)00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35(((
... ... @@ -336,8 +336,6 @@
336 336  )))
337 337  |(% style="width:441px" %)AT+APPKEY=00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35|(% style="width:180px" %)Set the Application Key|(% style="width:350px" %)OK
338 338  
339 -
340 -
341 341  == 5.3 Application Session Key ==
342 342  
343 343  Feature: Get or Set the Application Session Key.
... ... @@ -346,7 +346,7 @@
346 346  **AT Command: AT+APPSKEY**
347 347  {{/info}}
348 348  
349 -(% border="1" style="background-color:#ffffcc; color:green; width:1040.22px" %)
258 +(% style="background-color:#ffffcc; color:green; width:1040.22px" %)
350 350  |=(% colspan="3" style="width: 1037px;" %)AT+APPSKEY
351 351  |(% style="width:451px" %)**Command Example**|(% style="width:231px" %)**Function**|(% style="width:354px" %)**Response**
352 352  |(% style="width:451px" %)AT+APPSKEY=?|(% style="width:231px" %)Get the Application Session Key|(% style="width:354px" %)00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2(((
... ... @@ -356,8 +356,6 @@
356 356  OK
357 357  )))
358 358  
359 -
360 -
361 361  == 5.4 Device Address ==
362 362  
363 363  Feature: Get or Set the Device Address.
... ... @@ -366,7 +366,7 @@
366 366  **AT Command: AT+DADDR**
367 367  {{/info}}
368 368  
369 -(% border="1" style="background-color:#ffffcc; color:green; width:795.222px" %)
276 +(% style="background-color:#ffffcc; color:green; width:795.222px" %)
370 370  |=(% colspan="3" style="width: 792px;" %)AT+DADDR
371 371  |(% style="width:192px" %)**Command Example**|(% style="width:241px" %)**Function**|(% style="width:359px" %)**Response**
372 372  |(% style="width:192px" %)AT+DADDR=?|(% style="width:241px" %)Get the Application Session Key.|(% style="width:359px" %)(While Error in format, return AT_PARAM_ERROR)(((
... ... @@ -376,8 +376,6 @@
376 376  )))
377 377  |(% style="width:192px" %)AT+DADDR=A8 40 41 FF|(% style="width:241px" %)Set the Application Session Key.|(% style="width:359px" %)OK
378 378  
379 -
380 -
381 381  == 5.5 Device EUI ==
382 382  
383 383  Feature: Get or Set the Device EUI.
... ... @@ -386,7 +386,7 @@
386 386  **AT Command: AT+DEUI**
387 387  {{/info}}
388 388  
389 -(% border="1" style="background-color:#ffffcc; color:green; width:1035.22px" %)
294 +(% style="background-color:#ffffcc; color:green; width:1035.22px" %)
390 390  |=(% colspan="3" style="width: 1032px;" %)AT+DEUI
391 391  |(% style="width:250px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:634px" %)**Response**
392 392  |(% style="width:250px" %)AT+DEUI=?|(% style="width:147px" %)Get the Device EUI.|(% style="width:634px" %)00 44 34 22 33 45 55 55(((
... ... @@ -396,8 +396,6 @@
396 396  OK
397 397  )))
398 398  
399 -
400 -
401 401  == 5.6 Network ID ==
402 402  
403 403  Feature: Get or Set the Network ID.(You can enter this command change only after successful network connection)
... ... @@ -406,7 +406,7 @@
406 406  **AT Command: AT+NWKID**
407 407  {{/info}}
408 408  
409 -(% border="1" style="background-color:#ffffcc; color:green; width:448.222px" %)
312 +(% style="background-color:#ffffcc; color:green; width:448.222px" %)
410 410  |=(% colspan="3" style="width: 445px;" %)AT+NWKID
411 411  |(% style="width:191px" %)**Command Example**|(% style="width:153px" %)**Function**|(% style="width:101px" %)**Response**
412 412  |(% style="width:191px" %)AT+NWKID=?|(% style="width:153px" %)Get the Network ID.|(% style="width:101px" %)a8 40 41 ff(((
... ... @@ -414,8 +414,6 @@
414 414  )))
415 415  |(% style="width:191px" %)AT+NWKID=A8 40 41 FF|(% style="width:153px" %)Set the Network ID.|(% style="width:101px" %)OK
416 416  
417 -
418 -
419 419  == 5.7 Network Session Key ==
420 420  
421 421  Feature: Get or Set the Network Session Key
... ... @@ -424,7 +424,7 @@
424 424  **AT Command: AT+NWKSKEY**
425 425  {{/info}}
426 426  
427 -(% border="1" style="background-color:#ffffcc; color:green; width:1017.22px" %)
328 +(% style="background-color:#ffffcc; color:green; width:1017.22px" %)
428 428  |=(% colspan="3" style="width: 1014px;" %)AT+NWKSKEY
429 429  |(% style="width:455px" %)**Command Example**|(% style="width:215px" %)**Function**|(% style="width:343px" %)**Response**
430 430  |(% style="width:455px" %)AT+NWKSKEY=?|(% style="width:215px" %)Get the Network Session Key.|(% style="width:343px" %)00 4f 19 25 52 ce 97 09 d7 fa 84 71 db 51 02 92(((
... ... @@ -432,8 +432,6 @@
432 432  )))
433 433  |(% style="width:455px" %)AT+NWKSKEY=A8 40 41 FF FF 12 34 56 00 01 02 04 05 06 06 07|(% style="width:215px" %)Set the Network Session Key.|(% style="width:343px" %)OK
434 434  
435 -
436 -
437 437  = 6. Joining and sending date on LoRaWAN network =
438 438  
439 439  == 6.1 Confirm Mode ==
... ... @@ -444,7 +444,7 @@
444 444  **AT Command: AT+CFM**
445 445  {{/info}}
446 446  
447 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
346 +(% style="background-color:#ffffcc; color:green; width:710.222px" %)
448 448  |=(% colspan="3" style="width: 707px;" %)AT+CFM
449 449  |(% style="width:155px" %)**Command Example**|(% style="width:205px" %)**Function**|(% style="width:346px" %)**Response**
450 450  |(% style="width:155px" %)AT+CFM=?|(% style="width:205px" %)Get the confirmation mode|(% style="width:346px" %)0(((
... ... @@ -462,8 +462,6 @@
462 462  * Example 1: Downlink Payload: 0501 ~/~/ Set AT+CFM=1
463 463  * Example 2: Downlink Payload: 0500 ~/~/ Set AT+CFM=0
464 464  
465 -
466 -
467 467  == 6.2 Confirm Status ==
468 468  
469 469  Feature: Get confirmation status of the last AT+SEND (0-1).
... ... @@ -472,7 +472,7 @@
472 472  **AT Command: AT+CFS**
473 473  {{/info}}
474 474  
475 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
372 +(% style="background-color:#ffffcc; color:green; width:534.222px" %)
476 476  |=(% colspan="3" style="width: 531px;" %)AT+CFS
477 477  |(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:178px" %)**Response**
478 478  |(% style="width:156px" %)AT+CFS=?|(% style="width:193px" %)Get confirmation status|(% style="width:178px" %)0(((
... ... @@ -479,8 +479,6 @@
479 479  OK
480 480  )))
481 481  
482 -
483 -
484 484  == 6.3 Join LoRa® Network ==
485 485  
486 486  Feature: Join network.
... ... @@ -489,7 +489,7 @@
489 489  **AT Command: AT+JOIN**
490 490  {{/info}}
491 491  
492 -(% border="1" style="background-color:#ffffcc; color:green; width:647.222px" %)
387 +(% style="background-color:#ffffcc; color:green; width:647.222px" %)
493 493  |=(% colspan="3" style="width: 644px;" %)AT+JOIN
494 494  |(% style="width:163px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:334px" %)**Response**
495 495  |(% style="width:163px" %)AT+JOIN ?|(% style="width:147px" %)Get imformation.|(% style="width:334px" %)AT+JOIN: Join network(((
... ... @@ -498,7 +498,6 @@
498 498  While Error in format, return AT_BUSY_ERROR
499 499  )))
500 500  
501 -
502 502  == 6.4 LoRa® Network Join Mode ==
503 503  
504 504  Feature: Get or Set the Network Join Mode. (0: ABP, 1: OTAA).
... ... @@ -507,7 +507,7 @@
507 507  **AT Command: AT+NJM**
508 508  {{/info}}
509 509  
510 -(% border="1" style="background-color:#ffffcc; color:green; width:753.222px" %)
404 +(% style="background-color:#ffffcc; color:green; width:753.222px" %)
511 511  |=(% colspan="3" style="width: 750px;" %)AT+NJM
512 512  |(% style="width:162px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:361px" %)**Response**
513 513  |(% style="width:162px" %)AT+NJM=?|(% style="width:227px" %)Get the Network Join Mode|(% style="width:361px" %)1(((
... ... @@ -527,7 +527,6 @@
527 527  * **Example 1: **Downlink Payload: **2000** ~/~/ Set AT+NJM=O
528 528  * **Example 2:** Downlink Payload: **2001** ~/~/ Set AT+NJM=1
529 529  
530 -
531 531  == 6.5 LoRa® Network Join Status ==
532 532  
533 533  Feature: LoRa® Network Join Status.
... ... @@ -536,7 +536,7 @@
536 536  **AT Command: AT+NJS**
537 537  {{/info}}
538 538  
539 -(% border="1" style="background-color:#ffffcc; color:green; width:498.222px" %)
432 +(% style="background-color:#ffffcc; color:green; width:498.222px" %)
540 540  |=(% colspan="3" style="width: 495px;" %)AT+NJS
541 541  |(% style="width:169px" %)**Command Example**|(% style="width:164px" %)**Function**|(% style="width:161px" %)**Response**
542 542  |(% style="width:169px" %)AT+NJS=?|(% style="width:164px" %)Get the join status.|(% style="width:161px" %)0(((
... ... @@ -543,7 +543,6 @@
543 543  OK
544 544  )))
545 545  
546 -
547 547  == 6.6 Print Last Received Data in Raw Format ==
548 548  
549 549  Feature: Print Last Received Data in Raw Format<port:data>.
... ... @@ -552,7 +552,7 @@
552 552  **AT Command: AT+RECV**
553 553  {{/info}}
554 554  
555 -(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
447 +(% style="background-color:#ffffcc; color:green; width:587.222px" %)
556 556  |=(% colspan="3" style="width: 584px;" %)AT+RECV
557 557  |(% style="width:161px" %)**Command Example**|(% style="width:272px" %)**Function**|(% style="width:150px" %)**Response**
558 558  |(% style="width:161px" %)AT+RECV=?|(% style="width:272px" %)print last received data in raw format.|(% style="width:150px" %)0:(((
... ... @@ -559,7 +559,6 @@
559 559  OK
560 560  )))
561 561  
562 -
563 563  == 6.7 Print Last Received Data in Binary Format ==
564 564  
565 565  Feature: Print Last Received Data in Binary Format<port:data>.
... ... @@ -568,7 +568,7 @@
568 568  **AT Command: AT+RECVB**
569 569  {{/info}}
570 570  
571 -(% border="1" style="background-color:#ffffcc; color:green; width:793.222px" %)
462 +(% style="background-color:#ffffcc; color:green; width:793.222px" %)
572 572  |=(% colspan="3" style="width: 790px;" %)AT+RECVB
573 573  |(% style="width:173px" %)**Command Example**|(% style="width:497px" %)**Function**|(% style="width:120px" %)**Response**
574 574  |(% style="width:173px" %)AT+RECVB=?|(% style="width:497px" %)print last received data in binary format (with hexadecimal values).|(% style="width:120px" %)2: 0010(((
... ... @@ -575,7 +575,6 @@
575 575  OK
576 576  )))
577 577  
578 -
579 579  == 6.8 Send Text Data ==
580 580  
581 581  Feature: Send Text Data<port:data>.
... ... @@ -584,7 +584,7 @@
584 584  **AT Command: AT+SEND**
585 585  {{/info}}
586 586  
587 -(% border="1" style="background-color:#ffffcc; color:green; width:991.222px" %)
477 +(% style="background-color:#ffffcc; color:green; width:991.222px" %)
588 588  |=(% colspan="3" style="width: 988px;" %)AT+SEND
589 589  |(% style="width:201px" %)**Command Example**|(% style="width:340px" %)**Function**|(% style="width:446px" %)**Response**
590 590  |(% style="width:201px" %)AT+SEND=12:hello world|(% style="width:340px" %)Send text data along with the application port.|(% style="width:446px" %)OK(((
... ... @@ -595,7 +595,6 @@
595 595  
596 596  )))
597 597  
598 -
599 599  == 6.9 Send Hexadecimal Data ==
600 600  
601 601  Feature: Send hexadecimal data along with the application port.
... ... @@ -604,7 +604,7 @@
604 604  **AT Command: AT+SENDB**
605 605  {{/info}}
606 606  
607 -(% border="1" style="background-color:#ffffcc; color:green; width:1120.22px" %)
496 +(% style="background-color:#ffffcc; color:green; width:1120.22px" %)
608 608  |=(% colspan="3" style="width: 1117px;" %)AT+SENDB
609 609  |(% style="width:257px" %)**Command Example**|(% style="width:406px" %)**Function**|(% style="width:453px" %)**Response**
610 610  |(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)OK
... ... @@ -614,7 +614,6 @@
614 614  
615 615  )))
616 616  
617 -
618 618  = 7. LoRaWAN network management =
619 619  
620 620  == 7.1 Adaptive Data Rate ==
... ... @@ -625,7 +625,7 @@
625 625  **AT Command: AT+ADR**
626 626  {{/info}}
627 627  
628 -(% border="1" style="background-color:#ffffcc; color:green; width:683.222px" %)
516 +(% style="background-color:#ffffcc; color:green; width:683.222px" %)
629 629  |=(% colspan="3" style="width: 680px;" %)AT+ADR
630 630  |(% style="width:162px" %)**Command Example**|(% style="width:266px" %)**Function**|(% style="width:250px" %)**Response**
631 631  |(% style="width:162px" %)AT+ADR=?|(% style="width:266px" %)Get the Adaptive Data Rate setting.|(% style="width:250px" %)1(((
... ... @@ -646,7 +646,6 @@
646 646  * **Example 1**: Downlink Payload: **2201** ~/~/ Set AT+ADR=1.
647 647  * **Example 2**: Downlink Payload: **2200FFFF** ~/~/ Set AT+ADR=0.
648 648  
649 -
650 650  == 7.2 LoRa® Class ==
651 651  
652 652  Feature: Get or Set the Device Class(Currently only support class A, class C).
... ... @@ -655,7 +655,7 @@
655 655  **AT Command:AT+CLASS**
656 656  {{/info}}
657 657  
658 -(% border="1" style="background-color:#ffffcc; color:green; width:507.222px" %)
545 +(% style="background-color:#ffffcc; color:green; width:507.222px" %)
659 659  |=(% colspan="3" style="width: 504px;" %)AT+CLASS
660 660  |(% style="width:163px" %)**Command Example**|(% style="width:166px" %)**Function**|(% style="width:175px" %)**Response**
661 661  |(% style="width:163px" %)AT+CLASS=?|(% style="width:166px" %)Get the Device Class.|(% style="width:175px" %)A(((
... ... @@ -665,7 +665,6 @@
665 665  
666 666  )))
667 667  
668 -
669 669  == 7.3 Duty Cycle Setting ==
670 670  
671 671  Feature: Get or Set the ETSI Duty Cycle setting - 0=disable, 1=enable - Only for testing.
... ... @@ -674,7 +674,7 @@
674 674  **AT Command:AT+DCS**
675 675  {{/info}}
676 676  
677 -(% border="1" style="background-color:#ffffcc; color:green; width:515.222px" %)
563 +(% style="background-color:#ffffcc; color:green; width:515.222px" %)
678 678  |=(% colspan="3" style="width: 512px;" %)AT+DCS
679 679  |(% style="width:165px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:107px" %)**Response**
680 680  |(% style="width:165px" %)AT+DCS=?|(% style="width:239px" %)Get the ETSI Duty Cycle setting.|(% style="width:107px" %)1(((
... ... @@ -684,7 +684,6 @@
684 684  
685 685  )))
686 686  
687 -
688 688  == 7.4 Data Rate ==
689 689  
690 690  Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) . Note: while set Data Rate, please use set Adptive Data Rate, ADR=0 first. otherwise device will response to server's ADR command and change the DR to the setting from server
... ... @@ -693,7 +693,7 @@
693 693  **AT Command: AT+DR**
694 694  {{/info}}
695 695  
696 -(% border="1" style="background-color:#ffffcc; color:green; width:466.222px" %)
581 +(% style="background-color:#ffffcc; color:green; width:466.222px" %)
697 697  |=(% colspan="3" style="width: 463px;" %)AT+DR
698 698  |(% style="width:156px" %)**Command Example**|(% style="width:167px" %)**Function**|(% style="width:140px" %)**Response**
699 699  |(% style="width:156px" %)AT+DR=?|(% style="width:167px" %)Get the Data Rate.|(% style="width:140px" %)5(((
... ... @@ -713,7 +713,6 @@
713 713  * **Example 1**: Downlink Payload: **220001FF** ~/~/ Set AT+DR=1.
714 714  * **Example 2**: Downlink Payload: **220000FF** ~/~/ Set AT+DR=0.
715 715  
716 -
717 717  == 7.5 Frame Counter Downlink ==
718 718  
719 719  Feature: Get or Set the Frame Counter Downlink.
... ... @@ -722,7 +722,7 @@
722 722  **AT Command:AT+FCD**
723 723  {{/info}}
724 724  
725 -(% border="1" style="background-color:#ffffcc; color:green; width:693.222px" %)
609 +(% style="background-color:#ffffcc; color:green; width:693.222px" %)
726 726  |=(% colspan="3" style="width: 690px;" %)AT+FCD
727 727  |(% style="width:162px" %)**Command Example**|(% style="width:258px" %)**Function**|(% style="width:269px" %)**Response**
728 728  |(% style="width:162px" %)AT+FCD=?|(% style="width:258px" %)Get the Frame Counter Downlink.|(% style="width:269px" %)0(((
... ... @@ -734,7 +734,6 @@
734 734  
735 735  )))
736 736  
737 -
738 738  == 7.6 Frame Counter Uplink ==
739 739  
740 740  Feature: Get or Set the Frame Counter Uplink.
... ... @@ -743,7 +743,7 @@
743 743  **AT Command:AT+FCU**
744 744  {{/info}}
745 745  
746 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
629 +(% style="background-color:#ffffcc; color:green; width:534.222px" %)
747 747  |=(% colspan="3" style="width: 531px;" %)AT+FCU
748 748  |(% style="width:177px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:113px" %)**Response**
749 749  |(% style="width:177px" %)AT+FCU=?|(% style="width:239px" %)Get the Frame Counter Uplink.|(% style="width:113px" %)0(((
... ... @@ -753,7 +753,6 @@
753 753  
754 754  )))
755 755  
756 -
757 757  == 7.7 Join Accept Delay1 ==
758 758  
759 759  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 1 in ms.
... ... @@ -762,7 +762,7 @@
762 762  **AT Command:AT+JN1DL**
763 763  {{/info}}
764 764  
765 -(% border="1" style="background-color:#ffffcc; color:green; width:537.222px" %)
647 +(% style="background-color:#ffffcc; color:green; width:537.222px" %)
766 766  |=(% colspan="3" style="width: 534px;" %)AT+JN1DL
767 767  |(% style="width:164px" %)**Command Example**|(% style="width:229px" %)**Function**|(% style="width:140px" %)**Response**
768 768  |(% style="width:164px" %)AT+JN1DL=?|(% style="width:229px" %)Get the Join Accept Delay.|(% style="width:140px" %)5000(((
... ... @@ -772,7 +772,6 @@
772 772  
773 773  )))
774 774  
775 -
776 776  == 7.8 Join Accept Delay2 ==
777 777  
778 778  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 2 in ms.
... ... @@ -781,7 +781,7 @@
781 781  **AT Command:AT+JN2DL**
782 782  {{/info}}
783 783  
784 -(% border="1" style="background-color:#ffffcc; color:green; width:538.222px" %)
665 +(% style="background-color:#ffffcc; color:green; width:538.222px" %)
785 785  |=(% colspan="3" style="width: 535px;" %)AT+JN2DL
786 786  |(% style="width:160px" %)**Command Example**|(% style="width:228px" %)**Function**|(% style="width:146px" %)**Response**
787 787  |(% style="width:160px" %)AT+JN2DL=?|(% style="width:228px" %)Get the Join Accept Delay.|(% style="width:146px" %)6000(((
... ... @@ -791,7 +791,6 @@
791 791  
792 792  )))
793 793  
794 -
795 795  == 7.9 Public Network Mode ==
796 796  
797 797  Feature: Get or Set the public network mode. (0: off, 1: on)
... ... @@ -800,7 +800,7 @@
800 800  **AT Command:AT+PNM**
801 801  {{/info}}
802 802  
803 -(% border="1" style="background-color:#ffffcc; color:green; width:667.222px" %)
683 +(% style="background-color:#ffffcc; color:green; width:667.222px" %)
804 804  |=(% colspan="3" style="width: 664px;" %)AT+PNM
805 805  |(% style="width:166px" %)**Command Example**|(% style="width:225px" %)**Function**|(% style="width:272px" %)**Response**
806 806  |(% style="width:166px" %)AT+PNM=?|(% style="width:225px" %)Get the public network mode.|(% style="width:272px" %)1(((
... ... @@ -812,7 +812,6 @@
812 812  
813 813  )))
814 814  
815 -
816 816  == 7.10 Receive Delay1 ==
817 817  
818 818  Feature: Get or Set the delay between the end of the Tx and the Rx Window 1 in ms
... ... @@ -821,7 +821,7 @@
821 821  **AT Command:AT+RX1DL**
822 822  {{/info}}
823 823  
824 -(% border="1" style="background-color:#ffffcc; color:green; width:408.222px" %)
703 +(% style="background-color:#ffffcc; color:green; width:408.222px" %)
825 825  |=(% colspan="3" style="width: 405px;" %)AT+RX1DL
826 826  |(% style="width:155px" %)**Command Example**|(% style="width:128px" %)**Function**|(% style="width:122px" %)**Response**
827 827  |(% style="width:155px" %)AT+RX1DL=?|(% style="width:128px" %)Get the delay.|(% style="width:122px" %)1000(((
... ... @@ -831,9 +831,8 @@
831 831  
832 832  )))
833 833  
713 +== 7.11Receive Delay2 ==
834 834  
835 -== 7.11 Receive Delay2 ==
836 -
837 837  Feature: Get or Set the delay between the end of the Tx and the Rx Window 2 in ms
838 838  
839 839  {{info}}
... ... @@ -840,7 +840,7 @@
840 840  **AT Command:AT+RX2DL**
841 841  {{/info}}
842 842  
843 -(% border="1" style="background-color:#ffffcc; color:green; width:481.222px" %)
721 +(% style="background-color:#ffffcc; color:green; width:481.222px" %)
844 844  |=(% colspan="3" style="width: 478px;" %)AT+RX2DL
845 845  |(% style="width:175px" %)**Command Example**|(% style="width:152px" %)**Function**|(% style="width:150px" %)**Response**
846 846  |(% style="width:175px" %)AT+RX2DL=?|(% style="width:152px" %)Get the delay.|(% style="width:150px" %)2000(((
... ... @@ -850,7 +850,6 @@
850 850  
851 851  )))
852 852  
853 -
854 854  == 7.12 Rx2 Window Data Rate ==
855 855  
856 856  Feature: Get or Set the Rx2 window data rate (0-7 corresponding to DR_X)
... ... @@ -859,7 +859,7 @@
859 859  **AT Command:AT+RX2DR**
860 860  {{/info}}
861 861  
862 -(% border="1" style="background-color:#ffffcc; color:green; width:525.222px" %)
739 +(% style="background-color:#ffffcc; color:green; width:525.222px" %)
863 863  |=(% colspan="3" style="width: 522px;" %)AT+RX2DR
864 864  |(% style="width:160px" %)**Command Example**|(% style="width:232px" %)**Function**|(% style="width:130px" %)**Response**
865 865  |(% style="width:160px" %)AT+RX2DR=?|(% style="width:232px" %)Get the Rx2 window data rate.|(% style="width:130px" %)2(((
... ... @@ -869,7 +869,6 @@
869 869  
870 870  )))
871 871  
872 -
873 873  == 7.13 Rx2 Window Frequency ==
874 874  
875 875  Feature: Get or Set the Rx2 window frequency
... ... @@ -878,7 +878,7 @@
878 878  **AT Command:AT+RX2FQ**
879 879  {{/info}}
880 880  
881 -(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
757 +(% style="background-color:#ffffcc; color:green; width:587.222px" %)
882 882  |=(% colspan="3" style="width: 584px;" %)AT+RX2FQ
883 883  |(% style="width:183px" %)**Command Example**|(% style="width:240px" %)**Function**|(% style="width:160px" %)**Response**
884 884  |(% style="width:183px" %)AT+RX2FQ=?|(% style="width:240px" %)Get the Rx2 window frequency.|(% style="width:160px" %)434665000(((
... ... @@ -888,7 +888,6 @@
888 888  
889 889  )))
890 890  
891 -
892 892  == 7.14 Transmit Power ==
893 893  
894 894  Feature: Get or Set the Transmit Power(0-5, MAX:0, MIN:5, according to LoRaWAN Spec, or 40=10dB, 41 = 11dB, …, 50 = 20dB which is out of LoRaWAN spec. )
... ... @@ -897,7 +897,7 @@
897 897  **AT Command:AT+TXP**
898 898  {{/info}}
899 899  
900 -(% border="1" style="background-color:#ffffcc; color:green; width:465.222px" %)
775 +(% style="background-color:#ffffcc; color:green; width:465.222px" %)
901 901  |=(% colspan="3" style="width: 462px;" %)AT+TXP
902 902  |(% style="width:161px" %)**Command Example**|(% style="width:189px" %)**Function**|(% style="width:112px" %)**Response**
903 903  |(% style="width:161px" %)AT+TXP=?|(% style="width:189px" %)Get the Transmit Power.|(% style="width:112px" %)0(((
... ... @@ -914,7 +914,6 @@
914 914  * **Example 1**: Downlink Payload: **22000102** ~/~/ Set AT+TXP=2.
915 915  * **Example 2**: Downlink Payload: **220000FF** ~/~/ Set AT+TXP=0.
916 916  
917 -
918 918  == 7.15 RSSI of the Last Received Packet ==
919 919  
920 920  Feature: Get or Set the Rx2 window frequency
... ... @@ -923,7 +923,7 @@
923 923  **AT Command:AT+RSSI**
924 924  {{/info}}
925 925  
926 -(% border="1" style="background-color:#ffffcc; color:green; width:557.222px" %)
800 +(% style="background-color:#ffffcc; color:green; width:557.222px" %)
927 927  |=(% colspan="3" style="width: 554px;" %)AT+RSSI
928 928  |(% style="width:164px" %)**Command Example**|(% style="width:289px" %)**Function**|(% style="width:100px" %)**Response**
929 929  |(% style="width:164px" %)AT+RSSI=?|(% style="width:289px" %)Get the RSSI of the last received packet.|(% style="width:100px" %)0(((
... ... @@ -930,7 +930,6 @@
930 930  OK
931 931  )))
932 932  
933 -
934 934  == 7.16 SNR of the Last Received Packet ==
935 935  
936 936  Feature: Get the SNR of the last received packet
... ... @@ -939,7 +939,7 @@
939 939  **AT Command:AT+SNR**
940 940  {{/info}}
941 941  
942 -(% border="1" style="background-color:#ffffcc; color:green; width:571.222px" %)
815 +(% style="background-color:#ffffcc; color:green; width:571.222px" %)
943 943  |=(% colspan="3" style="width: 568px;" %)AT+SNR
944 944  |(% style="width:164px" %)**Command Example**|(% style="width:290px" %)**Function**|(% style="width:113px" %)**Response**
945 945  |(% style="width:164px" %)AT+SNR=?|(% style="width:290px" %)Get the RSSI of the last received packet.|(% style="width:113px" %)0(((
... ... @@ -946,7 +946,6 @@
946 946  OK
947 947  )))
948 948  
949 -
950 950  == 7.17 Application Port ==
951 951  
952 952  Feature: Get or set the application port.
... ... @@ -955,7 +955,7 @@
955 955  **AT Command: AT+PORT**
956 956  {{/info}}
957 957  
958 -(% border="1" style="background-color:#ffffcc; color:green; width:500.222px" %)
830 +(% style="background-color:#ffffcc; color:green; width:500.222px" %)
959 959  |=(% colspan="3" style="width: 497px;" %)AT+PORT
960 960  |(% style="width:157px" %)**Command Example**|(% style="width:204px" %)**Function**|(% style="width:135px" %)**Response**
961 961  |(% style="width:157px" %)AT+PORT=?|(% style="width:204px" %)Get the application port|(% style="width:135px" %)21(((
... ... @@ -974,7 +974,6 @@
974 974  * **Example 1**: Downlink Payload: **2301** ~/~/ set the application port to 1
975 975  * **Example 2**: Downlink Payload:** 2305** ~/~/ set the application port to 5
976 976  
977 -
978 978  == 7.18 Single Channel Mode ==
979 979  
980 980  Feature:Get or Set Frequency (Unit: Hz) for Single Channel Mode.
... ... @@ -983,7 +983,7 @@
983 983  **AT Command: AT+CHS**
984 984  {{/info}}
985 985  
986 -(% border="1" style="background-color:#ffffcc; color:green; width:603.222px" %)
857 +(% style="background-color:#ffffcc; color:green; width:603.222px" %)
987 987  |=(% colspan="3" style="width: 600px;" %)AT+CHS
988 988  |(% style="width:182px" %)**Command Example**|(% style="width:295px" %)**Function**|(% style="width:122px" %)**Response**
989 989  |(% style="width:182px" %)AT+CHS=?|(% style="width:295px" %)Get Frequency for Single Channel Mode|(% style="width:122px" %)0(((
... ... @@ -991,7 +991,6 @@
991 991  )))
992 992  |(% style="width:182px" %)AT+CHS=868100000|(% style="width:295px" %)Set Frequency for Single Channel Mode|(% style="width:122px" %)OK
993 993  
994 -
995 995  == 7.19 Eight Channel Mode ==
996 996  
997 997  Feature: Get or Set eight channels mode,Only for US915,AU915,CN470.
... ... @@ -1000,7 +1000,7 @@
1000 1000  **AT Command: AT+CHE**
1001 1001  {{/info}}
1002 1002  
1003 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
873 +(% style="background-color:#ffffcc; color:green; width:710.222px" %)
1004 1004  |=(% colspan="3" style="width: 707px;" %)AT+CHE
1005 1005  |(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
1006 1006  |(% style="width:160px" %)AT+CHE=?|(% style="width:198px" %)Get eight channels mode|(% style="width:349px" %)1(((
... ... @@ -1021,7 +1021,6 @@
1021 1021  * **Example 1**: Downlink Payload: 2401 ~/~/ set channel mode to 1
1022 1022  * **Example 2**: Downlink Payload: 2405 ~/~/ set channel mode to 5
1023 1023  
1024 -
1025 1025  == 7.20 Get or Set RXwindows1 timeout ==
1026 1026  
1027 1027  Feature:Get or Set the number of symbols to detect and timeout from RXwindow1(0 to 255).
... ... @@ -1030,7 +1030,7 @@
1030 1030  **AT Command: AT+RX1WTO**
1031 1031  {{/info}}
1032 1032  
1033 -(% border="1" style="background-color:#ffffcc; color:green; width:460.222px" %)
902 +(% style="background-color:#ffffcc; color:green; width:460.222px" %)
1034 1034  |=(% colspan="3" style="width: 457px;" %)AT+ RX1WTO
1035 1035  |(% style="width:163px" %)**Command Example**|(% style="width:201px" %)**Function**|(% style="width:93px" %)**Response**
1036 1036  |(% style="width:163px" %)AT+RX1WTO=?|(% style="width:201px" %)Get RXwindows1 timeout|(% style="width:93px" %)14(((
... ... @@ -1038,18 +1038,12 @@
1038 1038  )))
1039 1039  |(% style="width:163px" %)AT+RX1WTO=60|(% style="width:201px" %)Set RXwindows1 timeout|(% style="width:93px" %)OK
1040 1040  
1041 -(((
1042 -**AT+RX1TWO** is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
1043 -)))
910 +AT+RX1TWO is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
1044 1044  
1045 -[[image:image-20220526162535-1.png]]
912 +[[~[~[image:https://wiki.dragino.com/images/thumb/5/51/RX1WTO.JPG/600px-RX1WTO.JPG~|~|alt="RX1WTO.JPG" height="239" width="600"~]~]>>url:https://wiki.dragino.com/index.php/File:RX1WTO.JPG]]
1046 1046  
1047 -(((
1048 1048  Increasing thisvalue is equal to extending the time that the receiving window is opened, butthe corresponding power consumption will also increase. Properly increasingthis value can increase the success rate of the downlink.
1049 1049  
1050 -
1051 -)))
1052 -
1053 1053  == 7.21 Get or Set RXwindows2 timeout ==
1054 1054  
1055 1055  Feature:Get or Set the number of symbols to detect and timeout from RXwindow2(0 to 255).
... ... @@ -1058,7 +1058,7 @@
1058 1058  **AT Command: AT+RX2WTO**
1059 1059  {{/info}}
1060 1060  
1061 -(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
924 +(% style="background-color:#ffffcc; color:green; width:497.222px" %)
1062 1062  |=(% colspan="3" style="width: 494px;" %)AT+ RX2WTO
1063 1063  |(% style="width:190px" %)**Command Example**|(% style="width:199px" %)**Function**|(% style="width:104px" %)**Response**
1064 1064  |(% style="width:190px" %)AT+RX2WTO=?|(% style="width:199px" %)Get RXwindows2 timeout|(% style="width:104px" %)7(((
... ... @@ -1066,7 +1066,6 @@
1066 1066  )))
1067 1067  |(% style="width:190px" %)AT+RX2WTO=20|(% style="width:199px" %)Set RXwindows2 timeout|(% style="width:104px" %)OK
1068 1068  
1069 -
1070 1070  == 7.22 Setting up uplinkdwelltime (as923, au915) ==
1071 1071  
1072 1072  Feature: Get or Set uplinkdwelltime
... ... @@ -1075,7 +1075,7 @@
1075 1075  **AT Command: AT+DWELLT**
1076 1076  {{/info}}
1077 1077  
1078 -(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
940 +(% style="background-color:#ffffcc; color:green; width:497.222px" %)
1079 1079  |=(% colspan="3" style="width: 494px;" %)AT+DWELLT
1080 1080  |(% style="width:183px" %)**Command Example**|(% style="width:179px" %)**Function**|(% style="width:131px" %)**Response**
1081 1081  |(% style="width:183px" %)AT+DWELLT=?|(% style="width:179px" %)Get uplinkdwelltime|(% style="width:131px" %)1(((
... ... @@ -1094,7 +1094,6 @@
1094 1094  * **Example 1**: Downlink Payload: **2501** ~/~/ set uplinkdwelltime to 1
1095 1095  * **Example 2**: Downlink Payload: **2500** ~/~/ set uplinkdwelltime to 0
1096 1096  
1097 -
1098 1098  == 7.23 Set Packet Receiving Response Level ==
1099 1099  
1100 1100  Feature: Get or Set packet receiving response level. This feature is used to set compatible with different LoRaWAN servers. If RPL doesn;t match , user will see strange message in the server portal.
... ... @@ -1117,7 +1117,7 @@
1117 1117  **AT Command: AT+RPL**
1118 1118  {{/info}}
1119 1119  
1120 -(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
981 +(% style="background-color:#ffffcc; color:green; width:536.222px" %)
1121 1121  |=(% colspan="3" style="width: 533px;" %)AT+RPL
1122 1122  |(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1123 1123  |(% style="width:160px" %)AT+RPL=?|(% style="width:263px" %)Get packet receiving response level|(% style="width:109px" %)1(((
... ... @@ -1136,7 +1136,6 @@
1136 1136  * **Example 1**: Downlink Payload: **2101** ~/~/ set packet receiving response level to 1
1137 1137  * **Example 2**: Downlink Payload: **2102** ~/~/ set packet receiving response level to 2
1138 1138  
1139 -
1140 1140  = 8. AT Commands Combination =
1141 1141  
1142 1142  == 8.1 Set a fix RX2DR for downlink window ==
... ... @@ -1144,7 +1144,6 @@
1144 1144  * **AT+ADR=0 **~-~-> Disable ADR first
1145 1145  * **AT+RX2DR=xxxx** ~-~-> Set xxxx to your wanted DataRate
1146 1146  
1147 -
1148 1148  == 8.2 Use Downlink Command to set a fix uplink DR ==
1149 1149  
1150 1150  {{info}}
... ... @@ -1153,6 +1153,6 @@
1153 1153  
1154 1154  Same as:
1155 1155  
1156 -* AT+ADR=0  [[Reference>>||anchor="H7.1AdaptiveDataRate"]]
1157 -* AT+DR=5  [[Reference>>||anchor="H7.4DataRate"]]
1158 -* AT+TXP=0  [[Reference>>||anchor="H7.14TransmitPower"]]
1015 +* AT+ADR=0 [[Reference>>http://8.211.40.43:8080/xwiki/bin/view/End%20Device%20AT%20Commands%20and%20Downlink%20Command/#Adaptive_Data_Rate]]
1016 +* AT+DR=5 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Data_Rate]]
1017 +* AT+TXP=0 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Transmit_Power]]
image-20220511120050-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -136.3 KB
Content
image-20220526162535-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -149.4 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0