Last modified by kai on 2024/09/06 10:00
<
From version < 38.78 >
edited by Xiaoling
on 2022/05/31 09:19
To version < 10.1 >
edited by Xiaoling
on 2022/05/11 11:51
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,9 +1,8 @@
1 - **Contents：**
1 +Contens
2 2  
3 3  {{toc/}}
4 4  
5 5  
6 -
7 7  = 1. Introduction =
8 8  
9 9  Dragino LoRaWAN End Node support two types of AT Commands and Downlink Commands:
... ... @@ -11,93 +11,34 @@
11 11  * **Common Commands:** They should be available for each sensor, such as: change uplink interval, reset device.
12 12  * **Sensor Related Commands:** Only for special sensor, such as control relay, poll RS485 device.
13 13  
14 -(((
15 15  **This page shows the common commands since Dragino LoRaWAN stack DR-LWS-005. Make sure the end node support stack higher than DR-LWS-005 before checking this page.**
16 16  
17 -)))
18 18  
19 19  = 2. How to use AT Commands or Downlink command =
20 20  
21 21  * For AT Command , See Devices User Manual for Device. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
22 22  * For LoRaWAN Downlink: The gateway transfer downlink command in HEX format. This page shows the HEX format downlink code for each command. but some servers use base64 as downlink code. Below are reference for how to use downlink command:
23 -** Use HEX format to send a downlink: [[TTN v3>>Notes for TTN]]
24 -** Use Base64 format to send a downlink: [[Chirpstack>>Notes for ChirpStack]]
25 -** See use note for more serves [[Servers Note>>doc:Main.WebHome]](IoT LoRaWAN Server)
20 +** Use HEX format to send a downlink: [[TTN v3>>url:https://wiki.dragino.com/index.php/Notes_for_TTN#Send_Downlink_message]]
21 +** Use Base64 format to send a downlink: [[Chirpstack>>url:https://wiki.dragino.com/index.php/Notes_for_ChirpStack#Downlink]].
22 +** See use note for more serves [[Servers Note>>url:https://wiki.dragino.com/index.php/Main_Page#Use_Note_for_Server]]
26 26  
27 27  = 3. Support End Node and firmware version =
28 28  
29 -(% border="1" style="background-color:#ffffcc; color:green; width:966px" %)
30 -|=(% colspan="3" style="width: 963px;" %)(((
31 -Dragino STM32 base hardware Firmware / LoRaWAN stack list
32 -)))
33 -|(% style="width:187px" %)(((
34 -**Model**
35 -)))|(% style="width:330px" %)(((
36 -**Description**
37 -)))|(% style="width:445px" %)(((
38 -**Firmware Version <~-~-> Stack Version**
39 -)))
40 -|(% style="width:187px" %)(((
41 -[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],
42 -)))|(% style="width:330px" %)(((
43 -Open Source Generic LoRaWAN Sensor Node
44 -)))|(% style="width:445px" %)(((
45 -(((
46 -LSN50 v1.6.0 <~-~-> DR-LWS-003;
47 -)))
48 -
49 -(((
50 -(((
26 +(% style="background-color:#ffffcc; border:1; color:green; width:995.222px" %)
27 +|=(% colspan="3" style="width: 992px;" %)Dragino STM32 base hardware Firmware / LoRaWAN stack list
28 +|(% style="width:187px" %)**Model**|(% style="width:349px" %)**Description**|(% style="width:453px" %)**Firmware Version <~-~-> Stack Version**
29 +|(% style="width:187px" %)[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],|(% style="width:349px" %)Open Source Generic LoRaWAN Sensor Node|(% style="width:453px" %)LSN50 v1.6.0 <~-~-> DR-LWS-003;(((
51 51  LSN50 v1.7.0 <~-~-> DR-LWS-005; ~-~-> Support since this version
52 52  )))
53 -)))
54 -)))
55 -|(% style="width:187px" %)(((
56 -[[LGT92>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/142-lgt-92.html]],
57 -)))|(% style="width:330px" %)(((
58 -LoRaWAN GPS Tracker
59 -)))|(% style="width:445px" %)(((
60 -(((
61 -LGT92 v1.6.3 <~-~-> DR-LWS-003;
62 -)))
63 -
64 -(((
65 -(((
32 +|(% style="width:187px" %)[[LGT92>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/142-lgt-92.html]],|(% style="width:349px" %)LoRaWAN GPS Tracker|(% style="width:453px" %)LGT92 v1.6.3 <~-~-> DR-LWS-003;(((
66 66  LGT92 v1.6.4 <~-~-> DR-LWS-005;~-~-> Support since this version
67 67  )))
68 -)))
69 -)))
70 -|(% style="width:187px" %)(((
71 -[[LBT1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/165-lbt1.html]],
72 -)))|(% style="width:330px" %)(((
73 -LoRaWAN BLE Indoor Tracker
74 -)))|(% style="width:445px" %)(((
75 -LBT1 v1.0 <~-~-> DR-LWS-005;
76 -)))
77 -|(% style="width:187px" %)(((
78 -[[RS485-LN>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/154-rs485-ln.html]],
79 -)))|(% style="width:330px" %)(((
80 -LoRaWAN RS485 Modbus Converter
81 -)))|(% style="width:445px" %)(((
82 -RS485-LN v1.3 <~-~-> DR-LWS-005;
83 -)))
84 -|(% style="width:187px" %)(((
85 -[[LHT65>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/151-lht65.html]],
86 -)))|(% style="width:330px" %)(((
87 -LoRaWAN Temperature & Humidity Sensor
88 -)))|(% style="width:445px" %)(((
89 -(((
90 -LHT65 v1.7 <~-~-> DR-LWS-003;
91 -)))
92 -
93 -(((
94 -(((
35 +|(% style="width:187px" %)[[LBT1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/165-lbt1.html]],|(% style="width:349px" %)LoRaWAN BLE Indoor Tracker|(% style="width:453px" %)LBT1 v1.0 <~-~-> DR-LWS-005;
36 +|(% style="width:187px" %)[[RS485-LN>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/154-rs485-ln.html]],|(% style="width:349px" %)LoRaWAN RS485 Modbus Converter|(% style="width:453px" %)RS485-LN v1.3 <~-~-> DR-LWS-005;
37 +|(% style="width:187px" %)[[LHT65>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/151-lht65.html]],|(% style="width:349px" %)LoRaWAN Temperature & Humidity Sensor|(% style="width:453px" %)LHT65 v1.7 <~-~-> DR-LWS-003;(((
95 95  LHT65 v1.8.0 <~-~-> DR-LWS-005;~-~-> Support since this version
96 96  )))
97 -)))
98 -)))
99 99  
100 -
101 101  = 4. System Management Commands =
102 102  
103 103  == 4.1 Change Uplink Interval ==
... ... @@ -109,7 +109,7 @@
109 109  **AT Command: AT+TDC**
110 110  )))
111 111  
112 -(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
52 +(% style="background-color:#ffffcc; color:green; width:727.222px" %)
113 113  |=(% colspan="3" style="width: 724px;" %)AT+TDC
114 114  |(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
115 115  |(% style="width:165px" %)AT+TDC=?|(% style="width:227px" %)Show current transmit Interval|(% style="width:329px" %)30000(((
... ... @@ -125,18 +125,13 @@
125 125  **Downlink Command: 0x01**
126 126  {{/info}}
127 127  
128 -(((
129 129  Format: Command Code (0x01) followed by 3 bytes time value.
130 -)))
131 131  
132 -(((
133 133  If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
134 -)))
135 135  
136 136  * **Example 1**: Downlink Payload:** 0100001E** ~/~/ Set Transmit Interval (TDC) = 30 seconds
137 137  * **Example 2**: Downlink Payload:** 0100003C** ~/~/ Set Transmit Interval (TDC) = 60 seconds
138 138  
139 -
140 140  == 4.2 Reboot End Node ==
141 141  
142 142  Feature: Reboot End Node to perform a new OTAA or ABP Join.
... ... @@ -145,7 +145,7 @@
145 145  **AT Command: ATZ**
146 146  {{/info}}
147 147  
148 -(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
83 +(% border="0" style="background-color:#ffffcc; color:green; width:727.222px" %)
149 149  |=(% colspan="3" %)ATZ: Trig a reset of the MCU
150 150  |**Command Example**|**Function**|**Response**
151 151  |ATZ|Reset MCU|(((
... ... @@ -166,16 +166,10 @@
166 166  **Downlink Command: 0x04**
167 167  {{/info}}
168 168  
169 -(((
170 170  Format: Command Code (0x04) followed by FF.
171 -)))
172 172  
173 -(((
174 174  If the downlink payload=**04FF**, the end node will reboot.
175 175  
176 -
177 -)))
178 -
179 179  == 4.3 Reset to factory Default ==
180 180  
181 181  Feature: Reset the parameters to Factory Default, factory default value depends on the firmware settings, the OTAA and ABP keys will reserve after this command.
... ... @@ -184,7 +184,7 @@
184 184  **AT Command: AT+FDR**
185 185  {{/info}}
186 186  
187 -(% border="1" style="background-color:#ffffcc; color:green; width:831.222px" %)
116 +(% style="background-color:#ffffcc; color:green; width:831.222px" %)
188 188  |=(% colspan="3" style="width: 828px;" %)Reset to factory default
189 189  |(% style="width:181px" %)**Command Example**|(% style="width:181px" %)**Function**|(% style="width:465px" %)**Response**
190 190  |(% style="width:181px" %)AT+FDR|(% style="width:181px" %)Reset to factory default|(% style="width:465px" %)(((
... ... @@ -205,13 +205,9 @@
205 205  **Downlink Command: 0x04**
206 206  {{/info}}
207 207  
208 -(((
209 209  Format: Command Code (0x04) followed by FE.
210 -)))
211 211  
212 -(((
213 213  If the downlink payload=**04FE**, Reset Parameters to Factory Default, Keys Reserve.
214 -)))
215 215  
216 216  
217 217  == 4.4 Show Firmware Version ==
... ... @@ -222,10 +222,10 @@
222 222  **AT Command: AT+VER**
223 223  {{/info}}
224 224  
225 -(% border="1" style="background-color:#ffffcc; color:green; width:586px" %)
226 -|=(% colspan="3" style="width: 583px;" %)AT+VER: Image Version and Frequency Band
227 -|(% style="width:170px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:113px" %)**Response**
228 -|(% style="width:170px" %)AT+VER=?|(% style="width:300px" %)Show Image version and Frequency Band|(% style="width:113px" %)(((
150 +(% style="background-color:#ffffcc; color:green" %)
151 +|=(% colspan="3" %)AT+VER: Image Version and Frequency Band
152 +|**Command Example**|**Function**|**Response**
153 +|AT+VER=?|Show Image version and Frequency Band|(((
229 229  1.3 EU868
230 230  
231 231  OK
... ... @@ -235,25 +235,17 @@
235 235  **Downlink Command: 0x26 (Valid in 006 stack)**
236 236  {{/info}}
237 237  
238 -(((
239 239  Downlink Format: 0x26
240 -)))
241 241  
242 -(((
243 243  Device will reply with firmware version info, device info. frequency band info. detail please check device user manual. Total 5 bytes Example: If device is of firmware version 1.1.0 Upload: xx ~-~- yy ~-~- zz ~-~- 110 total 5 bytes
244 -)))
245 245  
246 -(((
247 247  **xx: Software Type:**
248 -)))
249 249  
250 250  * 0x00 01: LGT92 Version
251 251  * 0x00 02: LBT1
252 252  * 0x00 03: LSE01/LDDS75/LDDS20/LSPH01/LLMS01/LSNPK01
253 253  
254 -(((
255 255  **yy: Frequency Band:**
256 -)))
257 257  
258 258  * 0x01: EU868
259 259  * 0x02: US915
... ... @@ -266,9 +266,7 @@
266 266  * 0x09: AS923-2
267 267  * 0xa0: AS923-3
268 268  
269 -(((
270 270  **zz: Subband**
271 -)))
272 272  
273 273  firmware version: v1.1.0 ~-~-> 110
274 274  
... ... @@ -281,7 +281,7 @@
281 281  **AT Command: AT+CFG**
282 282  {{/info}}
283 283  
284 -(% border="1" style="background-color:#ffffcc; color:green; width:599.222px" %)
199 +(% style="background-color:#ffffcc; color:green; width:599.222px" %)
285 285  |=(% colspan="3" style="width: 596px;" %)AT+CFG: Print all configurations
286 286  |(% style="width:160px" %)**Command Example**|(% style="width:154px" %)**Function**|(% style="width:280px" %)**Response**
287 287  |(% style="width:160px" %)AT+CFG|(% style="width:154px" %)Show all configures|(% style="width:280px" %)(((
... ... @@ -298,7 +298,6 @@
298 298  OK
299 299  )))
300 300  
301 -
302 302  = 5. Keys, IDs and EUIs management =
303 303  
304 304  == 5.1 Application EUI ==
... ... @@ -309,7 +309,7 @@
309 309  **AT Command: AT+APPEUI**
310 310  {{/info}}
311 311  
312 -(% border="1" style="background-color:#ffffcc; color:green; width:686.222px" %)
226 +(% style="background-color:#ffffcc; color:green; width:686.222px" %)
313 313  |=(% colspan="3" style="width: 683px;" %)AT+APPEUI
314 314  |(% style="width:305px" %)**Command Example**|(% style="width:186px" %)**Function**|(% style="width:191px" %)**Response**
315 315  |(% style="width:305px" %)AT+APPEUI=?|(% style="width:186px" %)Get the Application EUI|(% style="width:191px" %)00 b3 d5 00 00 00 00 00(((
... ... @@ -317,7 +317,6 @@
317 317  )))
318 318  |(% style="width:305px" %)AT+APPEUI=00 b3 d5 7e f0 00 4d 34|(% style="width:186px" %)Set the Application EUI|(% style="width:191px" %)OK
319 319  
320 -
321 321  == 5.2 Application Key ==
322 322  
323 323  Feature: Get or Set the Application Key.
... ... @@ -326,7 +326,7 @@
326 326  **AT Command: AT+APPKEY**
327 327  {{/info}}
328 328  
329 -(% border="1" style="background-color:#ffffcc; color:green; width:976.222px" %)
242 +(% style="background-color:#ffffcc; color:green; width:976.222px" %)
330 330  |=(% colspan="3" style="width: 973px;" %)AT+APPKEY
331 331  |(% style="width:441px" %)**Command Example**|(% style="width:180px" %)**Function**|(% style="width:350px" %)**Response**
332 332  |(% style="width:441px" %)AT+APPKEY=?|(% style="width:180px" %)Get the Application Key|(% style="width:350px" %)00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35(((
... ... @@ -334,8 +334,6 @@
334 334  )))
335 335  |(% style="width:441px" %)AT+APPKEY=00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35|(% style="width:180px" %)Set the Application Key|(% style="width:350px" %)OK
336 336  
337 -
338 -
339 339  == 5.3 Application Session Key ==
340 340  
341 341  Feature: Get or Set the Application Session Key.
... ... @@ -344,7 +344,7 @@
344 344  **AT Command: AT+APPSKEY**
345 345  {{/info}}
346 346  
347 -(% border="1" style="background-color:#ffffcc; color:green; width:1040.22px" %)
258 +(% style="background-color:#ffffcc; color:green; width:1040.22px" %)
348 348  |=(% colspan="3" style="width: 1037px;" %)AT+APPSKEY
349 349  |(% style="width:451px" %)**Command Example**|(% style="width:231px" %)**Function**|(% style="width:354px" %)**Response**
350 350  |(% style="width:451px" %)AT+APPSKEY=?|(% style="width:231px" %)Get the Application Session Key|(% style="width:354px" %)00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2(((
... ... @@ -354,8 +354,6 @@
354 354  OK
355 355  )))
356 356  
357 -
358 -
359 359  == 5.4 Device Address ==
360 360  
361 361  Feature: Get or Set the Device Address.
... ... @@ -364,7 +364,7 @@
364 364  **AT Command: AT+DADDR**
365 365  {{/info}}
366 366  
367 -(% border="1" style="background-color:#ffffcc; color:green; width:795.222px" %)
276 +(% style="background-color:#ffffcc; color:green; width:795.222px" %)
368 368  |=(% colspan="3" style="width: 792px;" %)AT+DADDR
369 369  |(% style="width:192px" %)**Command Example**|(% style="width:241px" %)**Function**|(% style="width:359px" %)**Response**
370 370  |(% style="width:192px" %)AT+DADDR=?|(% style="width:241px" %)Get the Application Session Key.|(% style="width:359px" %)(While Error in format, return AT_PARAM_ERROR)(((
... ... @@ -374,8 +374,6 @@
374 374  )))
375 375  |(% style="width:192px" %)AT+DADDR=A8 40 41 FF|(% style="width:241px" %)Set the Application Session Key.|(% style="width:359px" %)OK
376 376  
377 -
378 -
379 379  == 5.5 Device EUI ==
380 380  
381 381  Feature: Get or Set the Device EUI.
... ... @@ -384,7 +384,7 @@
384 384  **AT Command: AT+DEUI**
385 385  {{/info}}
386 386  
387 -(% border="1" style="background-color:#ffffcc; color:green; width:1035.22px" %)
294 +(% style="background-color:#ffffcc; color:green; width:1035.22px" %)
388 388  |=(% colspan="3" style="width: 1032px;" %)AT+DEUI
389 389  |(% style="width:250px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:634px" %)**Response**
390 390  |(% style="width:250px" %)AT+DEUI=?|(% style="width:147px" %)Get the Device EUI.|(% style="width:634px" %)00 44 34 22 33 45 55 55(((
... ... @@ -394,8 +394,6 @@
394 394  OK
395 395  )))
396 396  
397 -
398 -
399 399  == 5.6 Network ID ==
400 400  
401 401  Feature: Get or Set the Network ID.(You can enter this command change only after successful network connection)
... ... @@ -404,7 +404,7 @@
404 404  **AT Command: AT+NWKID**
405 405  {{/info}}
406 406  
407 -(% border="1" style="background-color:#ffffcc; color:green; width:448.222px" %)
312 +(% style="background-color:#ffffcc; color:green; width:448.222px" %)
408 408  |=(% colspan="3" style="width: 445px;" %)AT+NWKID
409 409  |(% style="width:191px" %)**Command Example**|(% style="width:153px" %)**Function**|(% style="width:101px" %)**Response**
410 410  |(% style="width:191px" %)AT+NWKID=?|(% style="width:153px" %)Get the Network ID.|(% style="width:101px" %)a8 40 41 ff(((
... ... @@ -412,8 +412,6 @@
412 412  )))
413 413  |(% style="width:191px" %)AT+NWKID=A8 40 41 FF|(% style="width:153px" %)Set the Network ID.|(% style="width:101px" %)OK
414 414  
415 -
416 -
417 417  == 5.7 Network Session Key ==
418 418  
419 419  Feature: Get or Set the Network Session Key
... ... @@ -422,7 +422,7 @@
422 422  **AT Command: AT+NWKSKEY**
423 423  {{/info}}
424 424  
425 -(% border="1" style="background-color:#ffffcc; color:green; width:1017.22px" %)
328 +(% style="background-color:#ffffcc; color:green; width:1017.22px" %)
426 426  |=(% colspan="3" style="width: 1014px;" %)AT+NWKSKEY
427 427  |(% style="width:455px" %)**Command Example**|(% style="width:215px" %)**Function**|(% style="width:343px" %)**Response**
428 428  |(% style="width:455px" %)AT+NWKSKEY=?|(% style="width:215px" %)Get the Network Session Key.|(% style="width:343px" %)00 4f 19 25 52 ce 97 09 d7 fa 84 71 db 51 02 92(((
... ... @@ -430,8 +430,6 @@
430 430  )))
431 431  |(% style="width:455px" %)AT+NWKSKEY=A8 40 41 FF FF 12 34 56 00 01 02 04 05 06 06 07|(% style="width:215px" %)Set the Network Session Key.|(% style="width:343px" %)OK
432 432  
433 -
434 -
435 435  = 6. Joining and sending date on LoRaWAN network =
436 436  
437 437  == 6.1 Confirm Mode ==
... ... @@ -442,7 +442,7 @@
442 442  **AT Command: AT+CFM**
443 443  {{/info}}
444 444  
445 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
346 +(% style="background-color:#ffffcc; color:green; width:710.222px" %)
446 446  |=(% colspan="3" style="width: 707px;" %)AT+CFM
447 447  |(% style="width:155px" %)**Command Example**|(% style="width:205px" %)**Function**|(% style="width:346px" %)**Response**
448 448  |(% style="width:155px" %)AT+CFM=?|(% style="width:205px" %)Get the confirmation mode|(% style="width:346px" %)0(((
... ... @@ -460,8 +460,6 @@
460 460  * Example 1: Downlink Payload: 0501 ~/~/ Set AT+CFM=1
461 461  * Example 2: Downlink Payload: 0500 ~/~/ Set AT+CFM=0
462 462  
463 -
464 -
465 465  == 6.2 Confirm Status ==
466 466  
467 467  Feature: Get confirmation status of the last AT+SEND (0-1).
... ... @@ -470,7 +470,7 @@
470 470  **AT Command: AT+CFS**
471 471  {{/info}}
472 472  
473 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
372 +(% style="background-color:#ffffcc; color:green; width:534.222px" %)
474 474  |=(% colspan="3" style="width: 531px;" %)AT+CFS
475 475  |(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:178px" %)**Response**
476 476  |(% style="width:156px" %)AT+CFS=?|(% style="width:193px" %)Get confirmation status|(% style="width:178px" %)0(((
... ... @@ -477,8 +477,6 @@
477 477  OK
478 478  )))
479 479  
480 -
481 -
482 482  == 6.3 Join LoRa® Network ==
483 483  
484 484  Feature: Join network.
... ... @@ -487,7 +487,7 @@
487 487  **AT Command: AT+JOIN**
488 488  {{/info}}
489 489  
490 -(% border="1" style="background-color:#ffffcc; color:green; width:647.222px" %)
387 +(% style="background-color:#ffffcc; color:green; width:647.222px" %)
491 491  |=(% colspan="3" style="width: 644px;" %)AT+JOIN
492 492  |(% style="width:163px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:334px" %)**Response**
493 493  |(% style="width:163px" %)AT+JOIN ?|(% style="width:147px" %)Get imformation.|(% style="width:334px" %)AT+JOIN: Join network(((
... ... @@ -496,7 +496,6 @@
496 496  While Error in format, return AT_BUSY_ERROR
497 497  )))
498 498  
499 -
500 500  == 6.4 LoRa® Network Join Mode ==
501 501  
502 502  Feature: Get or Set the Network Join Mode. (0: ABP, 1: OTAA).
... ... @@ -505,7 +505,7 @@
505 505  **AT Command: AT+NJM**
506 506  {{/info}}
507 507  
508 -(% border="1" style="background-color:#ffffcc; color:green; width:753.222px" %)
404 +(% style="background-color:#ffffcc; color:green; width:753.222px" %)
509 509  |=(% colspan="3" style="width: 750px;" %)AT+NJM
510 510  |(% style="width:162px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:361px" %)**Response**
511 511  |(% style="width:162px" %)AT+NJM=?|(% style="width:227px" %)Get the Network Join Mode|(% style="width:361px" %)1(((
... ... @@ -525,7 +525,6 @@
525 525  * **Example 1: **Downlink Payload: **2000** ~/~/ Set AT+NJM=O
526 526  * **Example 2:** Downlink Payload: **2001** ~/~/ Set AT+NJM=1
527 527  
528 -
529 529  == 6.5 LoRa® Network Join Status ==
530 530  
531 531  Feature: LoRa® Network Join Status.
... ... @@ -534,7 +534,7 @@
534 534  **AT Command: AT+NJS**
535 535  {{/info}}
536 536  
537 -(% border="1" style="background-color:#ffffcc; color:green; width:498.222px" %)
432 +(% style="background-color:#ffffcc; color:green; width:498.222px" %)
538 538  |=(% colspan="3" style="width: 495px;" %)AT+NJS
539 539  |(% style="width:169px" %)**Command Example**|(% style="width:164px" %)**Function**|(% style="width:161px" %)**Response**
540 540  |(% style="width:169px" %)AT+NJS=?|(% style="width:164px" %)Get the join status.|(% style="width:161px" %)0(((
... ... @@ -541,7 +541,6 @@
541 541  OK
542 542  )))
543 543  
544 -
545 545  == 6.6 Print Last Received Data in Raw Format ==
546 546  
547 547  Feature: Print Last Received Data in Raw Format<port:data>.
... ... @@ -550,7 +550,7 @@
550 550  **AT Command: AT+RECV**
551 551  {{/info}}
552 552  
553 -(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
447 +(% style="background-color:#ffffcc; color:green; width:587.222px" %)
554 554  |=(% colspan="3" style="width: 584px;" %)AT+RECV
555 555  |(% style="width:161px" %)**Command Example**|(% style="width:272px" %)**Function**|(% style="width:150px" %)**Response**
556 556  |(% style="width:161px" %)AT+RECV=?|(% style="width:272px" %)print last received data in raw format.|(% style="width:150px" %)0:(((
... ... @@ -557,7 +557,6 @@
557 557  OK
558 558  )))
559 559  
560 -
561 561  == 6.7 Print Last Received Data in Binary Format ==
562 562  
563 563  Feature: Print Last Received Data in Binary Format<port:data>.
... ... @@ -566,7 +566,7 @@
566 566  **AT Command: AT+RECVB**
567 567  {{/info}}
568 568  
569 -(% border="1" style="background-color:#ffffcc; color:green; width:793.222px" %)
462 +(% style="background-color:#ffffcc; color:green; width:793.222px" %)
570 570  |=(% colspan="3" style="width: 790px;" %)AT+RECVB
571 571  |(% style="width:173px" %)**Command Example**|(% style="width:497px" %)**Function**|(% style="width:120px" %)**Response**
572 572  |(% style="width:173px" %)AT+RECVB=?|(% style="width:497px" %)print last received data in binary format (with hexadecimal values).|(% style="width:120px" %)2: 0010(((
... ... @@ -573,7 +573,6 @@
573 573  OK
574 574  )))
575 575  
576 -
577 577  == 6.8 Send Text Data ==
578 578  
579 579  Feature: Send Text Data<port:data>.
... ... @@ -582,7 +582,7 @@
582 582  **AT Command: AT+SEND**
583 583  {{/info}}
584 584  
585 -(% border="1" style="background-color:#ffffcc; color:green; width:991.222px" %)
477 +(% style="background-color:#ffffcc; color:green; width:991.222px" %)
586 586  |=(% colspan="3" style="width: 988px;" %)AT+SEND
587 587  |(% style="width:201px" %)**Command Example**|(% style="width:340px" %)**Function**|(% style="width:446px" %)**Response**
588 588  |(% style="width:201px" %)AT+SEND=12:hello world|(% style="width:340px" %)Send text data along with the application port.|(% style="width:446px" %)OK(((
... ... @@ -593,7 +593,6 @@
593 593  
594 594  )))
595 595  
596 -
597 597  == 6.9 Send Hexadecimal Data ==
598 598  
599 599  Feature: Send hexadecimal data along with the application port.
... ... @@ -602,7 +602,7 @@
602 602  **AT Command: AT+SENDB**
603 603  {{/info}}
604 604  
605 -(% border="1" style="background-color:#ffffcc; color:green; width:1120.22px" %)
496 +(% style="background-color:#ffffcc; color:green; width:1120.22px" %)
606 606  |=(% colspan="3" style="width: 1117px;" %)AT+SENDB
607 607  |(% style="width:257px" %)**Command Example**|(% style="width:406px" %)**Function**|(% style="width:453px" %)**Response**
608 608  |(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)OK
... ... @@ -612,7 +612,6 @@
612 612  
613 613  )))
614 614  
615 -
616 616  = 7. LoRaWAN network management =
617 617  
618 618  == 7.1 Adaptive Data Rate ==
... ... @@ -623,7 +623,7 @@
623 623  **AT Command: AT+ADR**
624 624  {{/info}}
625 625  
626 -(% border="1" style="background-color:#ffffcc; color:green; width:683.222px" %)
516 +(% style="background-color:#ffffcc; color:green; width:683.222px" %)
627 627  |=(% colspan="3" style="width: 680px;" %)AT+ADR
628 628  |(% style="width:162px" %)**Command Example**|(% style="width:266px" %)**Function**|(% style="width:250px" %)**Response**
629 629  |(% style="width:162px" %)AT+ADR=?|(% style="width:266px" %)Get the Adaptive Data Rate setting.|(% style="width:250px" %)1(((
... ... @@ -644,7 +644,6 @@
644 644  * **Example 1**: Downlink Payload: **2201** ~/~/ Set AT+ADR=1.
645 645  * **Example 2**: Downlink Payload: **2200FFFF** ~/~/ Set AT+ADR=0.
646 646  
647 -
648 648  == 7.2 LoRa® Class ==
649 649  
650 650  Feature: Get or Set the Device Class(Currently only support class A, class C).
... ... @@ -653,7 +653,7 @@
653 653  **AT Command:AT+CLASS**
654 654  {{/info}}
655 655  
656 -(% border="1" style="background-color:#ffffcc; color:green; width:507.222px" %)
545 +(% style="background-color:#ffffcc; color:green; width:507.222px" %)
657 657  |=(% colspan="3" style="width: 504px;" %)AT+CLASS
658 658  |(% style="width:163px" %)**Command Example**|(% style="width:166px" %)**Function**|(% style="width:175px" %)**Response**
659 659  |(% style="width:163px" %)AT+CLASS=?|(% style="width:166px" %)Get the Device Class.|(% style="width:175px" %)A(((
... ... @@ -663,7 +663,6 @@
663 663  
664 664  )))
665 665  
666 -
667 667  == 7.3 Duty Cycle Setting ==
668 668  
669 669  Feature: Get or Set the ETSI Duty Cycle setting - 0=disable, 1=enable - Only for testing.
... ... @@ -672,7 +672,7 @@
672 672  **AT Command:AT+DCS**
673 673  {{/info}}
674 674  
675 -(% border="1" style="background-color:#ffffcc; color:green; width:515.222px" %)
563 +(% style="background-color:#ffffcc; color:green; width:515.222px" %)
676 676  |=(% colspan="3" style="width: 512px;" %)AT+DCS
677 677  |(% style="width:165px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:107px" %)**Response**
678 678  |(% style="width:165px" %)AT+DCS=?|(% style="width:239px" %)Get the ETSI Duty Cycle setting.|(% style="width:107px" %)1(((
... ... @@ -682,7 +682,6 @@
682 682  
683 683  )))
684 684  
685 -
686 686  == 7.4 Data Rate ==
687 687  
688 688  Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) . Note: while set Data Rate, please use set Adptive Data Rate, ADR=0 first. otherwise device will response to server's ADR command and change the DR to the setting from server
... ... @@ -691,7 +691,7 @@
691 691  **AT Command: AT+DR**
692 692  {{/info}}
693 693  
694 -(% border="1" style="background-color:#ffffcc; color:green; width:466.222px" %)
581 +(% style="background-color:#ffffcc; color:green; width:466.222px" %)
695 695  |=(% colspan="3" style="width: 463px;" %)AT+DR
696 696  |(% style="width:156px" %)**Command Example**|(% style="width:167px" %)**Function**|(% style="width:140px" %)**Response**
697 697  |(% style="width:156px" %)AT+DR=?|(% style="width:167px" %)Get the Data Rate.|(% style="width:140px" %)5(((
... ... @@ -711,7 +711,6 @@
711 711  * **Example 1**: Downlink Payload: **220001FF** ~/~/ Set AT+DR=1.
712 712  * **Example 2**: Downlink Payload: **220000FF** ~/~/ Set AT+DR=0.
713 713  
714 -
715 715  == 7.5 Frame Counter Downlink ==
716 716  
717 717  Feature: Get or Set the Frame Counter Downlink.
... ... @@ -720,7 +720,7 @@
720 720  **AT Command:AT+FCD**
721 721  {{/info}}
722 722  
723 -(% border="1" style="background-color:#ffffcc; color:green; width:693.222px" %)
609 +(% style="background-color:#ffffcc; color:green; width:693.222px" %)
724 724  |=(% colspan="3" style="width: 690px;" %)AT+FCD
725 725  |(% style="width:162px" %)**Command Example**|(% style="width:258px" %)**Function**|(% style="width:269px" %)**Response**
726 726  |(% style="width:162px" %)AT+FCD=?|(% style="width:258px" %)Get the Frame Counter Downlink.|(% style="width:269px" %)0(((
... ... @@ -732,7 +732,6 @@
732 732  
733 733  )))
734 734  
735 -
736 736  == 7.6 Frame Counter Uplink ==
737 737  
738 738  Feature: Get or Set the Frame Counter Uplink.
... ... @@ -741,7 +741,7 @@
741 741  **AT Command:AT+FCU**
742 742  {{/info}}
743 743  
744 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
629 +(% style="background-color:#ffffcc; color:green; width:534.222px" %)
745 745  |=(% colspan="3" style="width: 531px;" %)AT+FCU
746 746  |(% style="width:177px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:113px" %)**Response**
747 747  |(% style="width:177px" %)AT+FCU=?|(% style="width:239px" %)Get the Frame Counter Uplink.|(% style="width:113px" %)0(((
... ... @@ -751,7 +751,6 @@
751 751  
752 752  )))
753 753  
754 -
755 755  == 7.7 Join Accept Delay1 ==
756 756  
757 757  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 1 in ms.
... ... @@ -760,7 +760,7 @@
760 760  **AT Command:AT+JN1DL**
761 761  {{/info}}
762 762  
763 -(% border="1" style="background-color:#ffffcc; color:green; width:537.222px" %)
647 +(% style="background-color:#ffffcc; color:green; width:537.222px" %)
764 764  |=(% colspan="3" style="width: 534px;" %)AT+JN1DL
765 765  |(% style="width:164px" %)**Command Example**|(% style="width:229px" %)**Function**|(% style="width:140px" %)**Response**
766 766  |(% style="width:164px" %)AT+JN1DL=?|(% style="width:229px" %)Get the Join Accept Delay.|(% style="width:140px" %)5000(((
... ... @@ -770,7 +770,6 @@
770 770  
771 771  )))
772 772  
773 -
774 774  == 7.8 Join Accept Delay2 ==
775 775  
776 776  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 2 in ms.
... ... @@ -779,7 +779,7 @@
779 779  **AT Command:AT+JN2DL**
780 780  {{/info}}
781 781  
782 -(% border="1" style="background-color:#ffffcc; color:green; width:538.222px" %)
665 +(% style="background-color:#ffffcc; color:green; width:538.222px" %)
783 783  |=(% colspan="3" style="width: 535px;" %)AT+JN2DL
784 784  |(% style="width:160px" %)**Command Example**|(% style="width:228px" %)**Function**|(% style="width:146px" %)**Response**
785 785  |(% style="width:160px" %)AT+JN2DL=?|(% style="width:228px" %)Get the Join Accept Delay.|(% style="width:146px" %)6000(((
... ... @@ -789,7 +789,6 @@
789 789  
790 790  )))
791 791  
792 -
793 793  == 7.9 Public Network Mode ==
794 794  
795 795  Feature: Get or Set the public network mode. (0: off, 1: on)
... ... @@ -798,7 +798,7 @@
798 798  **AT Command:AT+PNM**
799 799  {{/info}}
800 800  
801 -(% border="1" style="background-color:#ffffcc; color:green; width:667.222px" %)
683 +(% style="background-color:#ffffcc; color:green; width:667.222px" %)
802 802  |=(% colspan="3" style="width: 664px;" %)AT+PNM
803 803  |(% style="width:166px" %)**Command Example**|(% style="width:225px" %)**Function**|(% style="width:272px" %)**Response**
804 804  |(% style="width:166px" %)AT+PNM=?|(% style="width:225px" %)Get the public network mode.|(% style="width:272px" %)1(((
... ... @@ -810,7 +810,6 @@
810 810  
811 811  )))
812 812  
813 -
814 814  == 7.10 Receive Delay1 ==
815 815  
816 816  Feature: Get or Set the delay between the end of the Tx and the Rx Window 1 in ms
... ... @@ -819,7 +819,7 @@
819 819  **AT Command:AT+RX1DL**
820 820  {{/info}}
821 821  
822 -(% border="1" style="background-color:#ffffcc; color:green; width:408.222px" %)
703 +(% style="background-color:#ffffcc; color:green; width:408.222px" %)
823 823  |=(% colspan="3" style="width: 405px;" %)AT+RX1DL
824 824  |(% style="width:155px" %)**Command Example**|(% style="width:128px" %)**Function**|(% style="width:122px" %)**Response**
825 825  |(% style="width:155px" %)AT+RX1DL=?|(% style="width:128px" %)Get the delay.|(% style="width:122px" %)1000(((
... ... @@ -829,9 +829,8 @@
829 829  
830 830  )))
831 831  
713 +== 7.11Receive Delay2 ==
832 832  
833 -== 7.11 Receive Delay2 ==
834 -
835 835  Feature: Get or Set the delay between the end of the Tx and the Rx Window 2 in ms
836 836  
837 837  {{info}}
... ... @@ -838,7 +838,7 @@
838 838  **AT Command:AT+RX2DL**
839 839  {{/info}}
840 840  
841 -(% border="1" style="background-color:#ffffcc; color:green; width:481.222px" %)
721 +(% style="background-color:#ffffcc; color:green; width:481.222px" %)
842 842  |=(% colspan="3" style="width: 478px;" %)AT+RX2DL
843 843  |(% style="width:175px" %)**Command Example**|(% style="width:152px" %)**Function**|(% style="width:150px" %)**Response**
844 844  |(% style="width:175px" %)AT+RX2DL=?|(% style="width:152px" %)Get the delay.|(% style="width:150px" %)2000(((
... ... @@ -848,7 +848,6 @@
848 848  
849 849  )))
850 850  
851 -
852 852  == 7.12 Rx2 Window Data Rate ==
853 853  
854 854  Feature: Get or Set the Rx2 window data rate (0-7 corresponding to DR_X)
... ... @@ -857,7 +857,7 @@
857 857  **AT Command:AT+RX2DR**
858 858  {{/info}}
859 859  
860 -(% border="1" style="background-color:#ffffcc; color:green; width:525.222px" %)
739 +(% style="background-color:#ffffcc; color:green; width:525.222px" %)
861 861  |=(% colspan="3" style="width: 522px;" %)AT+RX2DR
862 862  |(% style="width:160px" %)**Command Example**|(% style="width:232px" %)**Function**|(% style="width:130px" %)**Response**
863 863  |(% style="width:160px" %)AT+RX2DR=?|(% style="width:232px" %)Get the Rx2 window data rate.|(% style="width:130px" %)2(((
... ... @@ -867,7 +867,6 @@
867 867  
868 868  )))
869 869  
870 -
871 871  == 7.13 Rx2 Window Frequency ==
872 872  
873 873  Feature: Get or Set the Rx2 window frequency
... ... @@ -876,7 +876,7 @@
876 876  **AT Command:AT+RX2FQ**
877 877  {{/info}}
878 878  
879 -(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
757 +(% style="background-color:#ffffcc; color:green; width:587.222px" %)
880 880  |=(% colspan="3" style="width: 584px;" %)AT+RX2FQ
881 881  |(% style="width:183px" %)**Command Example**|(% style="width:240px" %)**Function**|(% style="width:160px" %)**Response**
882 882  |(% style="width:183px" %)AT+RX2FQ=?|(% style="width:240px" %)Get the Rx2 window frequency.|(% style="width:160px" %)434665000(((
... ... @@ -886,7 +886,6 @@
886 886  
887 887  )))
888 888  
889 -
890 890  == 7.14 Transmit Power ==
891 891  
892 892  Feature: Get or Set the Transmit Power(0-5, MAX:0, MIN:5, according to LoRaWAN Spec, or 40=10dB, 41 = 11dB, …, 50 = 20dB which is out of LoRaWAN spec. )
... ... @@ -895,7 +895,7 @@
895 895  **AT Command:AT+TXP**
896 896  {{/info}}
897 897  
898 -(% border="1" style="background-color:#ffffcc; color:green; width:465.222px" %)
775 +(% style="background-color:#ffffcc; color:green; width:465.222px" %)
899 899  |=(% colspan="3" style="width: 462px;" %)AT+TXP
900 900  |(% style="width:161px" %)**Command Example**|(% style="width:189px" %)**Function**|(% style="width:112px" %)**Response**
901 901  |(% style="width:161px" %)AT+TXP=?|(% style="width:189px" %)Get the Transmit Power.|(% style="width:112px" %)0(((
... ... @@ -912,7 +912,6 @@
912 912  * **Example 1**: Downlink Payload: **22000102** ~/~/ Set AT+TXP=2.
913 913  * **Example 2**: Downlink Payload: **220000FF** ~/~/ Set AT+TXP=0.
914 914  
915 -
916 916  == 7.15 RSSI of the Last Received Packet ==
917 917  
918 918  Feature: Get or Set the Rx2 window frequency
... ... @@ -921,7 +921,7 @@
921 921  **AT Command:AT+RSSI**
922 922  {{/info}}
923 923  
924 -(% border="1" style="background-color:#ffffcc; color:green; width:557.222px" %)
800 +(% style="background-color:#ffffcc; color:green; width:557.222px" %)
925 925  |=(% colspan="3" style="width: 554px;" %)AT+RSSI
926 926  |(% style="width:164px" %)**Command Example**|(% style="width:289px" %)**Function**|(% style="width:100px" %)**Response**
927 927  |(% style="width:164px" %)AT+RSSI=?|(% style="width:289px" %)Get the RSSI of the last received packet.|(% style="width:100px" %)0(((
... ... @@ -928,7 +928,6 @@
928 928  OK
929 929  )))
930 930  
931 -
932 932  == 7.16 SNR of the Last Received Packet ==
933 933  
934 934  Feature: Get the SNR of the last received packet
... ... @@ -937,7 +937,7 @@
937 937  **AT Command:AT+SNR**
938 938  {{/info}}
939 939  
940 -(% border="1" style="background-color:#ffffcc; color:green; width:571.222px" %)
815 +(% style="background-color:#ffffcc; color:green; width:571.222px" %)
941 941  |=(% colspan="3" style="width: 568px;" %)AT+SNR
942 942  |(% style="width:164px" %)**Command Example**|(% style="width:290px" %)**Function**|(% style="width:113px" %)**Response**
943 943  |(% style="width:164px" %)AT+SNR=?|(% style="width:290px" %)Get the RSSI of the last received packet.|(% style="width:113px" %)0(((
... ... @@ -944,7 +944,6 @@
944 944  OK
945 945  )))
946 946  
947 -
948 948  == 7.17 Application Port ==
949 949  
950 950  Feature: Get or set the application port.
... ... @@ -953,7 +953,7 @@
953 953  **AT Command: AT+PORT**
954 954  {{/info}}
955 955  
956 -(% border="1" style="background-color:#ffffcc; color:green; width:500.222px" %)
830 +(% style="background-color:#ffffcc; color:green; width:500.222px" %)
957 957  |=(% colspan="3" style="width: 497px;" %)AT+PORT
958 958  |(% style="width:157px" %)**Command Example**|(% style="width:204px" %)**Function**|(% style="width:135px" %)**Response**
959 959  |(% style="width:157px" %)AT+PORT=?|(% style="width:204px" %)Get the application port|(% style="width:135px" %)21(((
... ... @@ -972,7 +972,6 @@
972 972  * **Example 1**: Downlink Payload: **2301** ~/~/ set the application port to 1
973 973  * **Example 2**: Downlink Payload:** 2305** ~/~/ set the application port to 5
974 974  
975 -
976 976  == 7.18 Single Channel Mode ==
977 977  
978 978  Feature:Get or Set Frequency (Unit: Hz) for Single Channel Mode.
... ... @@ -981,7 +981,7 @@
981 981  **AT Command: AT+CHS**
982 982  {{/info}}
983 983  
984 -(% border="1" style="background-color:#ffffcc; color:green; width:603.222px" %)
857 +(% style="background-color:#ffffcc; color:green; width:603.222px" %)
985 985  |=(% colspan="3" style="width: 600px;" %)AT+CHS
986 986  |(% style="width:182px" %)**Command Example**|(% style="width:295px" %)**Function**|(% style="width:122px" %)**Response**
987 987  |(% style="width:182px" %)AT+CHS=?|(% style="width:295px" %)Get Frequency for Single Channel Mode|(% style="width:122px" %)0(((
... ... @@ -989,7 +989,6 @@
989 989  )))
990 990  |(% style="width:182px" %)AT+CHS=868100000|(% style="width:295px" %)Set Frequency for Single Channel Mode|(% style="width:122px" %)OK
991 991  
992 -
993 993  == 7.19 Eight Channel Mode ==
994 994  
995 995  Feature: Get or Set eight channels mode,Only for US915,AU915,CN470.
... ... @@ -998,7 +998,7 @@
998 998  **AT Command: AT+CHE**
999 999  {{/info}}
1000 1000  
1001 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
873 +(% style="background-color:#ffffcc; color:green; width:710.222px" %)
1002 1002  |=(% colspan="3" style="width: 707px;" %)AT+CHE
1003 1003  |(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
1004 1004  |(% style="width:160px" %)AT+CHE=?|(% style="width:198px" %)Get eight channels mode|(% style="width:349px" %)1(((
... ... @@ -1019,7 +1019,6 @@
1019 1019  * **Example 1**: Downlink Payload: 2401 ~/~/ set channel mode to 1
1020 1020  * **Example 2**: Downlink Payload: 2405 ~/~/ set channel mode to 5
1021 1021  
1022 -
1023 1023  == 7.20 Get or Set RXwindows1 timeout ==
1024 1024  
1025 1025  Feature:Get or Set the number of symbols to detect and timeout from RXwindow1(0 to 255).
... ... @@ -1028,7 +1028,7 @@
1028 1028  **AT Command: AT+RX1WTO**
1029 1029  {{/info}}
1030 1030  
1031 -(% border="1" style="background-color:#ffffcc; color:green; width:460.222px" %)
902 +(% style="background-color:#ffffcc; color:green; width:460.222px" %)
1032 1032  |=(% colspan="3" style="width: 457px;" %)AT+ RX1WTO
1033 1033  |(% style="width:163px" %)**Command Example**|(% style="width:201px" %)**Function**|(% style="width:93px" %)**Response**
1034 1034  |(% style="width:163px" %)AT+RX1WTO=?|(% style="width:201px" %)Get RXwindows1 timeout|(% style="width:93px" %)14(((
... ... @@ -1036,18 +1036,12 @@
1036 1036  )))
1037 1037  |(% style="width:163px" %)AT+RX1WTO=60|(% style="width:201px" %)Set RXwindows1 timeout|(% style="width:93px" %)OK
1038 1038  
1039 -(((
1040 -**AT+RX1TWO** is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
1041 -)))
910 +AT+RX1TWO is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
1042 1042  
1043 -[[image:image-20220526162535-1.png]]
912 +[[~[~[image:https://wiki.dragino.com/images/thumb/5/51/RX1WTO.JPG/600px-RX1WTO.JPG~|~|alt="RX1WTO.JPG" height="239" width="600"~]~]>>url:https://wiki.dragino.com/index.php/File:RX1WTO.JPG]]
1044 1044  
1045 -(((
1046 1046  Increasing thisvalue is equal to extending the time that the receiving window is opened, butthe corresponding power consumption will also increase. Properly increasingthis value can increase the success rate of the downlink.
1047 1047  
1048 -
1049 -)))
1050 -
1051 1051  == 7.21 Get or Set RXwindows2 timeout ==
1052 1052  
1053 1053  Feature:Get or Set the number of symbols to detect and timeout from RXwindow2(0 to 255).
... ... @@ -1056,7 +1056,7 @@
1056 1056  **AT Command: AT+RX2WTO**
1057 1057  {{/info}}
1058 1058  
1059 -(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
924 +(% style="background-color:#ffffcc; color:green; width:497.222px" %)
1060 1060  |=(% colspan="3" style="width: 494px;" %)AT+ RX2WTO
1061 1061  |(% style="width:190px" %)**Command Example**|(% style="width:199px" %)**Function**|(% style="width:104px" %)**Response**
1062 1062  |(% style="width:190px" %)AT+RX2WTO=?|(% style="width:199px" %)Get RXwindows2 timeout|(% style="width:104px" %)7(((
... ... @@ -1064,7 +1064,6 @@
1064 1064  )))
1065 1065  |(% style="width:190px" %)AT+RX2WTO=20|(% style="width:199px" %)Set RXwindows2 timeout|(% style="width:104px" %)OK
1066 1066  
1067 -
1068 1068  == 7.22 Setting up uplinkdwelltime (as923, au915) ==
1069 1069  
1070 1070  Feature: Get or Set uplinkdwelltime
... ... @@ -1073,7 +1073,7 @@
1073 1073  **AT Command: AT+DWELLT**
1074 1074  {{/info}}
1075 1075  
1076 -(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
940 +(% style="background-color:#ffffcc; color:green; width:497.222px" %)
1077 1077  |=(% colspan="3" style="width: 494px;" %)AT+DWELLT
1078 1078  |(% style="width:183px" %)**Command Example**|(% style="width:179px" %)**Function**|(% style="width:131px" %)**Response**
1079 1079  |(% style="width:183px" %)AT+DWELLT=?|(% style="width:179px" %)Get uplinkdwelltime|(% style="width:131px" %)1(((
... ... @@ -1092,7 +1092,6 @@
1092 1092  * **Example 1**: Downlink Payload: **2501** ~/~/ set uplinkdwelltime to 1
1093 1093  * **Example 2**: Downlink Payload: **2500** ~/~/ set uplinkdwelltime to 0
1094 1094  
1095 -
1096 1096  == 7.23 Set Packet Receiving Response Level ==
1097 1097  
1098 1098  Feature: Get or Set packet receiving response level. This feature is used to set compatible with different LoRaWAN servers. If RPL doesn;t match , user will see strange message in the server portal.
... ... @@ -1115,7 +1115,7 @@
1115 1115  **AT Command: AT+RPL**
1116 1116  {{/info}}
1117 1117  
1118 -(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
981 +(% style="background-color:#ffffcc; color:green; width:536.222px" %)
1119 1119  |=(% colspan="3" style="width: 533px;" %)AT+RPL
1120 1120  |(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1121 1121  |(% style="width:160px" %)AT+RPL=?|(% style="width:263px" %)Get packet receiving response level|(% style="width:109px" %)1(((
... ... @@ -1134,7 +1134,6 @@
1134 1134  * **Example 1**: Downlink Payload: **2101** ~/~/ set packet receiving response level to 1
1135 1135  * **Example 2**: Downlink Payload: **2102** ~/~/ set packet receiving response level to 2
1136 1136  
1137 -
1138 1138  = 8. AT Commands Combination =
1139 1139  
1140 1140  == 8.1 Set a fix RX2DR for downlink window ==
... ... @@ -1142,7 +1142,6 @@
1142 1142  * **AT+ADR=0 **~-~-> Disable ADR first
1143 1143  * **AT+RX2DR=xxxx** ~-~-> Set xxxx to your wanted DataRate
1144 1144  
1145 -
1146 1146  == 8.2 Use Downlink Command to set a fix uplink DR ==
1147 1147  
1148 1148  {{info}}
... ... @@ -1151,6 +1151,6 @@
1151 1151  
1152 1152  Same as:
1153 1153  
1154 -* AT+ADR=0  [[Reference>>||anchor="H7.1AdaptiveDataRate"]]
1155 -* AT+DR=5  [[Reference>>||anchor="H7.4DataRate"]]
1156 -* AT+TXP=0  [[Reference>>||anchor="H7.14TransmitPower"]]
1015 +* AT+ADR=0 [[Reference>>http://8.211.40.43:8080/xwiki/bin/view/End%20Device%20AT%20Commands%20and%20Downlink%20Command/#Adaptive_Data_Rate]]
1016 +* AT+DR=5 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Data_Rate]]
1017 +* AT+TXP=0 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Transmit_Power]]
image-20220511120050-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -136.3 KB
Content
image-20220526162535-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -149.4 KB
Content

Applications

Navigation

Copyright ©2010-2022 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0