Changes for page End Device AT Commands and Downlink Command
Last modified by kai on 2024/09/06 10:00
Summary
-
Page properties (1 modified, 0 added, 0 removed)
-
Attachments (0 modified, 0 added, 2 removed)
Details
- Page properties
-
- Content
-
... ... @@ -1,9 +1,8 @@ 1 - **Contents：**1 +Contens 2 2 3 3 {{toc/}} 4 4 5 5 6 - 7 7 = 1. Introduction = 8 8 9 9 Dragino LoRaWAN End Node support two types of AT Commands and Downlink Commands: ... ... @@ -11,93 +11,48 @@ 11 11 * **Common Commands:** They should be available for each sensor, such as: change uplink interval, reset device. 12 12 * **Sensor Related Commands:** Only for special sensor, such as control relay, poll RS485 device. 13 13 14 -((( 15 15 **This page shows the common commands since Dragino LoRaWAN stack DR-LWS-005. Make sure the end node support stack higher than DR-LWS-005 before checking this page.** 16 16 17 -))) 18 18 19 19 = 2. How to use AT Commands or Downlink command = 20 20 21 21 * For AT Command , See Devices User Manual for Device. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]] 22 22 * For LoRaWAN Downlink: The gateway transfer downlink command in HEX format. This page shows the HEX format downlink code for each command. but some servers use base64 as downlink code. Below are reference for how to use downlink command: 23 -** Use HEX format to send a downlink: [[TTN v3>>Notes 24 -** Use Base64 format to send a downlink: [[Chirpstack>>Notes 25 -** See use note for more serves [[Servers Note>>doc :Main.WebHome]](IoT LoRaWANServer)20 +** Use HEX format to send a downlink: [[TTN v3>>url:https://wiki.dragino.com/index.php/Notes_for_TTN#Send_Downlink_message]] 21 +** Use Base64 format to send a downlink: [[Chirpstack>>url:https://wiki.dragino.com/index.php/Notes_for_ChirpStack#Downlink]]. 22 +** See use note for more serves [[Servers Note>>url:https://wiki.dragino.com/index.php/Main_Page#Use_Note_for_Server]] 26 26 27 27 = 3. Support End Node and firmware version = 28 28 29 -(% border="1" style="background-color:#ffffcc; color:green; width:966px" %) 30 -|=(% colspan="3" style="width: 963px;" %)((( 31 -Dragino STM32 base hardware Firmware / LoRaWAN stack list 32 -))) 33 -|(% style="width:187px" %)((( 34 -**Model** 35 -)))|(% style="width:330px" %)((( 36 -**Description** 37 -)))|(% style="width:445px" %)((( 38 -**Firmware Version <~-~-> Stack Version** 39 -))) 40 -|(% style="width:187px" %)((( 41 -[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]], 42 -)))|(% style="width:330px" %)((( 43 -Open Source Generic LoRaWAN Sensor Node 44 -)))|(% style="width:445px" %)((( 45 -((( 46 -LSN50 v1.6.0 <~-~-> DR-LWS-003; 47 -))) 48 48 49 -((( 50 -((( 27 +(% style="background-color:#ffffcc; color:green; width:1039.22px" %) 28 +|(% colspan="3" style="width:1036px" %)** Dragino STM32 base hardware Firmware / LoRaWAN stack list** 29 +|(% style="width:216px" %)**Model**|(% style="width:346px" %)**Description**|(% style="width:472px" %)**Firmware Version <~-~-> Stack Version** 30 +|(% style="width:216px" %)[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],|(% style="width:346px" %)Open Source Generic LoRaWAN Sensor Node|(% style="width:472px" %)LSN50 v1.6.0 <~-~-> DR-LWS-003;((( 51 51 LSN50 v1.7.0 <~-~-> DR-LWS-005; ~-~-> Support since this version 52 52 ))) 53 -))) 54 -))) 55 -|(% style="width:187px" %)((( 56 -[[LGT92>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/142-lgt-92.html]], 57 -)))|(% style="width:330px" %)((( 58 -LoRaWAN GPS Tracker 59 -)))|(% style="width:445px" %)((( 60 -((( 61 -LGT92 v1.6.3 <~-~-> DR-LWS-003; 62 -))) 33 +|(% style="width:216px" %) |(% style="width:346px" %) |(% style="width:472px" %) 34 +|(% style="width:216px" %) |(% style="width:346px" %) |(% style="width:472px" %) 35 +|(% style="width:216px" %) |(% style="width:346px" %) |(% style="width:472px" %) 36 +|(% style="width:216px" %) |(% style="width:346px" %) |(% style="width:472px" %) 63 63 64 -((( 65 -((( 38 + 39 + 40 +(% border="1" style="background-color:#ffffcc; color:green; width:942.222px" %) 41 +|=(% colspan="3" style="width: 939px;" %) Dragino STM32 base hardware Firmware / LoRaWAN stack list 42 +|(% style="width:187px" %)**Model**|(% style="width:306px" %)**Description**|(% style="width:443px" %)**Firmware Version <~-~-> Stack Version** 43 +|(% style="width:187px" %)[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],|(% style="width:306px" %)Open Source Generic LoRaWAN Sensor Node|(% style="width:443px" %)LSN50 v1.6.0 <~-~-> DR-LWS-003;((( 44 +LSN50 v1.7.0 <~-~-> DR-LWS-005; ~-~-> Support since this version 45 +))) 46 +|(% style="width:187px" %)[[LGT92>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/142-lgt-92.html]],|(% style="width:306px" %)LoRaWAN GPS Tracker|(% style="width:443px" %)LGT92 v1.6.3 <~-~-> DR-LWS-003;((( 66 66 LGT92 v1.6.4 <~-~-> DR-LWS-005;~-~-> Support since this version 67 67 ))) 68 -))) 69 -))) 70 -|(% style="width:187px" %)((( 71 -[[LBT1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/165-lbt1.html]], 72 -)))|(% style="width:330px" %)((( 73 -LoRaWAN BLE Indoor Tracker 74 -)))|(% style="width:445px" %)((( 75 -LBT1 v1.0 <~-~-> DR-LWS-005; 76 -))) 77 -|(% style="width:187px" %)((( 78 -[[RS485-LN>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/154-rs485-ln.html]], 79 -)))|(% style="width:330px" %)((( 80 -LoRaWAN RS485 Modbus Converter 81 -)))|(% style="width:445px" %)((( 82 -RS485-LN v1.3 <~-~-> DR-LWS-005; 83 -))) 84 -|(% style="width:187px" %)((( 85 -[[LHT65>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/151-lht65.html]], 86 -)))|(% style="width:330px" %)((( 87 -LoRaWAN Temperature & Humidity Sensor 88 -)))|(% style="width:445px" %)((( 89 -((( 90 -LHT65 v1.7 <~-~-> DR-LWS-003; 91 -))) 92 - 93 -((( 94 -((( 49 +|(% style="width:187px" %)[[LBT1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/165-lbt1.html]],|(% style="width:306px" %)LoRaWAN BLE Indoor Tracker|(% style="width:443px" %)LBT1 v1.0 <~-~-> DR-LWS-005; 50 +|(% style="width:187px" %)[[RS485-LN>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/154-rs485-ln.html]],|(% style="width:306px" %)LoRaWAN RS485 Modbus Converter|(% style="width:443px" %)RS485-LN v1.3 <~-~-> DR-LWS-005; 51 +|(% style="width:187px" %)[[LHT65>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/151-lht65.html]],|(% style="width:306px" %)LoRaWAN Temperature & Humidity Sensor|(% style="width:443px" %)LHT65 v1.7 <~-~-> DR-LWS-003;((( 95 95 LHT65 v1.8.0 <~-~-> DR-LWS-005;~-~-> Support since this version 96 96 ))) 97 -))) 98 -))) 99 99 100 - 101 101 = 4. System Management Commands = 102 102 103 103 == 4.1 Change Uplink Interval == ... ... @@ -106,11 +106,11 @@ 106 106 107 107 (% class="box infomessage" %) 108 108 ((( 109 - **AT Command: AT+TDC**63 +AT Command: AT+TDC 110 110 ))) 111 111 112 112 (% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %) 113 -|=(% colspan="3" style="width: 724px;" %)AT+TDC 67 +|=(% colspan="3" style="width: 724px;" %) AT+TDC 114 114 |(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response** 115 115 |(% style="width:165px" %)AT+TDC=?|(% style="width:227px" %)Show current transmit Interval|(% style="width:329px" %)30000((( 116 116 OK ... ... @@ -121,33 +121,27 @@ 121 121 Set transmit interval to 60000ms = 60 seconds 122 122 ))) 123 123 124 -{{info}} 125 125 **Downlink Command: 0x01** 126 -{{/info}} 127 127 128 -((( 129 129 Format: Command Code (0x01) followed by 3 bytes time value. 130 -))) 131 131 132 -((( 133 133 If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01. 134 -))) 135 135 136 136 * **Example 1**: Downlink Payload:** 0100001E** ~/~/ Set Transmit Interval (TDC) = 30 seconds 137 137 * **Example 2**: Downlink Payload:** 0100003C** ~/~/ Set Transmit Interval (TDC) = 60 seconds 138 138 139 - 140 140 == 4.2 Reboot End Node == 141 141 142 142 Feature: Reboot End Node to perform a new OTAA or ABP Join. 143 143 144 144 {{info}} 145 - **AT Command: ATZ**92 +AT Command: ATZ 146 146 {{/info}} 147 147 148 148 (% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %) 149 -|=(% colspan="3" %)ATZ: Trig a reset of the MCU 96 +|=(% colspan="3" %) ATZ: Trig a reset of the MCU 150 150 |**Command Example**|**Function**|**Response** 98 +~)~)~) 151 151 |ATZ|Reset MCU|((( 152 152 Device reset and show booting info 153 153 ... ... @@ -162,56 +162,35 @@ 162 162 <followed by the Tx and Rx information> 163 163 ))) 164 164 165 -{{info}} 166 -**Downlink Command: 0x04** 167 -{{/info}} 113 +Downlink Command: 0x04 168 168 169 -((( 170 170 Format: Command Code (0x04) followed by FF. 171 -))) 172 172 173 -((( 174 -If the downlink payload=**04FF**, the end node will reboot. 117 +If the downlink payload=04FF, the end node will reboot. 175 175 176 - 177 -))) 178 - 179 179 == 4.3 Reset to factory Default == 180 180 181 181 Feature: Reset the parameters to Factory Default, factory default value depends on the firmware settings, the OTAA and ABP keys will reserve after this command. 182 182 183 -{{info}} 184 -**AT Command: AT+FDR** 185 -{{/info}} 123 +AT Command: AT+FDR 186 186 187 -(% border="1" style="background-color:#ffffcc; color:green; width:831.222px" %) 188 -|=(% colspan="3" style="width: 828px;" %)Reset to factory default 189 -|(% style="width:181px" %)**Command Example**|(% style="width:181px" %)**Function**|(% style="width:465px" %)**Response** 190 -|(% style="width:181px" %)AT+FDR|(% style="width:181px" %)Reset to factory default|(% style="width:465px" %)((( 191 -Device reset to factory default parameters and show booting info 125 +|=(% colspan="3" %)Reset to factory default 126 +|**Command Example**|**Function**|**Response** 127 +|AT+FDR|Reset to factory default|Device reset to factory default parameters and show booting info 192 192 193 -LSN50 Device/LoRa ST Module 194 - 129 +{{{LSN50 Device/LoRa ST Module 195 195 Image Version: XX 196 - 197 197 Frequency Band: XX 198 - 199 199 DevEui= XX XX XX XX XX XX XX XX 200 - 201 201 Please set the parameters or reset Device to apply change 202 - )))134 +}}} 203 203 204 -{{info}} 205 -**Downlink Command: 0x04** 206 -{{/info}} 207 207 208 -((( 137 +Downlink Command: 0x04 138 + 209 209 Format: Command Code (0x04) followed by FE. 210 -))) 211 211 212 -((( 213 -If the downlink payload=**04FE**, Reset Parameters to Factory Default, Keys Reserve. 214 -))) 141 +If the downlink payload=04FE, Reset Parameters to Factory Default, Keys Reserve. 215 215 216 216 217 217 == 4.4 Show Firmware Version == ... ... @@ -218,42 +218,30 @@ 218 218 219 219 Feature: Show firmware version. No downlink command yet. 220 220 221 -{{info}} 222 -**AT Command: AT+VER** 223 -{{/info}} 148 +AT Command: AT+VER 224 224 225 -(% border="1" style="background-color:#ffffcc; color:green; width:586px" %) 226 -|=(% colspan="3" style="width: 583px;" %)AT+VER: Image Version and Frequency Band 227 -|(% style="width:170px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:113px" %)**Response** 228 -|(% style="width:170px" %)AT+VER=?|(% style="width:300px" %)Show Image version and Frequency Band|(% style="width:113px" %)((( 229 -1.3 EU868 150 +|=(% colspan="3" %)AT+VER: Image Version and Frequency Band 151 +|**Command Example**|**Function**|**Response** 152 +|AT+VER=?|Show Image version and Frequency Band| 230 230 154 +{{{1.3 EU868 231 231 OK 232 - )))156 +}}} 233 233 234 -{{info}} 235 -**Downlink Command: 0x26 (Valid in 006 stack)** 236 -{{/info}} 237 237 238 -((( 159 +Downlink Command: 0x26 (Valid in 006 stack) 160 + 239 239 Downlink Format: 0x26 240 -))) 241 241 242 -((( 243 243 Device will reply with firmware version info, device info. frequency band info. detail please check device user manual. Total 5 bytes Example: If device is of firmware version 1.1.0 Upload: xx ~-~- yy ~-~- zz ~-~- 110 total 5 bytes 244 -))) 245 245 246 -((( 247 -**xx: Software Type:** 248 -))) 165 +xx: Software Type: 249 249 250 250 * 0x00 01: LGT92 Version 251 251 * 0x00 02: LBT1 252 252 * 0x00 03: LSE01/LDDS75/LDDS20/LSPH01/LLMS01/LSNPK01 253 253 254 -((( 255 -**yy: Frequency Band:** 256 -))) 171 +yy: Frequency Band: 257 257 258 258 * 0x01: EU868 259 259 * 0x02: US915 ... ... @@ -266,9 +266,7 @@ 266 266 * 0x09: AS923-2 267 267 * 0xa0: AS923-3 268 268 269 -((( 270 -**zz: Subband** 271 -))) 184 +zz: Subband 272 272 273 273 firmware version: v1.1.0 ~-~-> 110 274 274 ... ... @@ -277,26 +277,19 @@ 277 277 278 278 Feature: Show All configure. No downlink command yet. 279 279 280 -{{info}} 281 -**AT Command: AT+CFG** 282 -{{/info}} 193 +AT Command: AT+CFG 283 283 284 -(% border="1" style="background-color:#ffffcc; color:green; width:599.222px" %) 285 -|=(% colspan="3" style="width: 596px;" %)AT+CFG: Print all configurations 286 -|(% style="width:160px" %)**Command Example**|(% style="width:154px" %)**Function**|(% style="width:280px" %)**Response** 287 -|(% style="width:160px" %)AT+CFG|(% style="width:154px" %)Show all configures|(% style="width:280px" %)((( 288 -AT+DEUI = XX XX XX XX XX XX XX XX 195 +|=(% colspan="3" %)AT+CFG: Print all configurations 196 +|**Command Example**|**Function**|**Response** 197 +|AT+CFG|Show all configures| 289 289 199 +{{{AT+DEUI = XX XX XX XX XX XX XX XX 290 290 AT+DADDR=XXXXXXXX 291 - 292 292 ………. 293 - 294 294 AT+RX2WTO=X 295 - 296 296 AT+CHS=868100000 297 - 298 298 OK 299 - )))205 +}}} 300 300 301 301 302 302 = 5. Keys, IDs and EUIs management = ... ... @@ -305,131 +305,99 @@ 305 305 306 306 Feature: Get or Set the Application EUI. 307 307 308 -{{info}} 309 -**AT Command: AT+APPEUI** 310 -{{/info}} 214 +AT Command: AT+APPEUI 311 311 312 -(% border="1" style="background-color:#ffffcc; color:green; width:686.222px" %) 313 -|=(% colspan="3" style="width: 683px;" %)AT+APPEUI 314 -|(% style="width:305px" %)**Command Example**|(% style="width:186px" %)**Function**|(% style="width:191px" %)**Response** 315 -|(% style="width:305px" %)AT+APPEUI=?|(% style="width:186px" %)Get the Application EUI|(% style="width:191px" %)00 b3 d5 00 00 00 00 00((( 216 +|=(% colspan="3" %)AT+APPEUI 217 +|**Command Example**|**Function**|**Response** 218 +|AT+APPEUI=?|Get the Application EUI|00 b3 d5 00 00 00 00 00((( 316 316 OK 317 317 ))) 318 -| (% style="width:305px" %)AT+APPEUI=00 b3 d5 7e f0 00 4d 34|(% style="width:186px" %)Set the Application EUI|(% style="width:191px" %)OK221 +|AT+APPEUI=00 b3 d5 7e f0 00 4d 34|Set the Application EUI|OK 319 319 320 - 321 321 == 5.2 Application Key == 322 322 323 323 Feature: Get or Set the Application Key. 324 324 325 -{{info}} 326 -**AT Command: AT+APPKEY** 327 -{{/info}} 227 +AT Command: AT+APPKEY 328 328 329 -(% border="1" style="background-color:#ffffcc; color:green; width:976.222px" %) 330 -|=(% colspan="3" style="width: 973px;" %)AT+APPKEY 331 -|(% style="width:441px" %)**Command Example**|(% style="width:180px" %)**Function**|(% style="width:350px" %)**Response** 332 -|(% style="width:441px" %)AT+APPKEY=?|(% style="width:180px" %)Get the Application Key|(% style="width:350px" %)00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35((( 229 +|=(% colspan="3" %)AT+APPKEY 230 +|**Command Example**|**Function**|**Response** 231 +|AT+APPKEY=?|Get the Application Key|00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35((( 333 333 OK 334 334 ))) 335 -| (% style="width:441px" %)AT+APPKEY=00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35|(% style="width:180px" %)Set the Application Key|(% style="width:350px" %)OK234 +|AT+APPKEY=00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35|Set the Application Key.|OK 336 336 337 337 == 5.3 Application Session Key == 338 338 339 339 Feature: Get or Set the Application Session Key. 340 340 341 -{{info}} 342 -**AT Command: AT+APPSKEY** 343 -{{/info}} 240 +AT Command: AT+APPSKEY 344 344 345 -(% border="1" style="background-color:#ffffcc; color:green; width:1040.22px" %) 346 -|=(% colspan="3" style="width: 1037px;" %)AT+APPSKEY 347 -|(% style="width:451px" %)**Command Example**|(% style="width:231px" %)**Function**|(% style="width:354px" %)**Response** 348 -|(% style="width:451px" %)AT+APPSKEY=?|(% style="width:231px" %)Get the Application Session Key|(% style="width:354px" %)00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2((( 242 +|=(% colspan="3" %)AT+APPSKEY 243 +|**Command Example**|**Function**|**Response** 244 +|AT+APPSKEY=?|Get the Application Session Key|00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2((( 349 349 OK 350 350 ))) 351 -| (% style="width:451px" %)AT+APPSKEY=00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2|(% style="width:231px" %)Set the Application Session Key|(% style="width:354px" %)(While Error in format, return AT_PARAM_ERROR)(((247 +|AT+APPSKEY=00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2|Set the Application Session Key.|(While Error in format, return AT_PARAM_ERROR)((( 352 352 OK 353 353 ))) 354 354 355 - 356 - 357 357 == 5.4 Device Address == 358 358 359 359 Feature: Get or Set the Device Address. 360 360 361 -{{info}} 362 -**AT Command: AT+DADDR** 363 -{{/info}} 255 +AT Command: AT+DADDR 364 364 365 -(% border="1" style="background-color:#ffffcc; color:green; width:795.222px" %) 366 -|=(% colspan="3" style="width: 792px;" %)AT+DADDR 367 -|(% style="width:192px" %)**Command Example**|(% style="width:241px" %)**Function**|(% style="width:359px" %)**Response** 368 -|(% style="width:192px" %)AT+DADDR=?|(% style="width:241px" %)Get the Application Session Key.|(% style="width:359px" %)(While Error in format, return AT_PARAM_ERROR)((( 257 +|=(% colspan="3" %)AT+DADDR 258 +|**Command Example**|**Function**|**Response** 259 +|AT+DADDR=?|Get the Application Session Key.|(While Error in format, return AT_PARAM_ERROR)((( 369 369 A8 40 41 FF 370 370 371 371 OK 372 372 ))) 373 -| (% style="width:192px" %)AT+DADDR=A8 40 41 FF|(% style="width:241px" %)Set the Application Session Key.|(% style="width:359px" %)OK264 +|AT+DADDR=A8 40 41 FF|Set the Application Session Key.|OK 374 374 375 - 376 - 377 377 == 5.5 Device EUI == 378 378 379 379 Feature: Get or Set the Device EUI. 380 380 381 -{{info}} 382 -**AT Command: AT+DEUI** 383 -{{/info}} 270 +AT Command: AT+DEUI 384 384 385 -(% border="1" style="background-color:#ffffcc; color:green; width:1035.22px" %) 386 -|=(% colspan="3" style="width: 1032px;" %)AT+DEUI 387 -|(% style="width:250px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:634px" %)**Response** 388 -|(% style="width:250px" %)AT+DEUI=?|(% style="width:147px" %)Get the Device EUI.|(% style="width:634px" %)00 44 34 22 33 45 55 55((( 272 +|=(% colspan="3" %)AT+DEUI 273 +|**Command Example**|**Function**|**Response** 274 +|AT+DEUI=?|Get the Device EUI.|00 44 34 22 33 45 55 55((( 389 389 OK 390 390 ))) 391 -| (% style="width:250px" %)AT+DEUI=A8 40 41 FF FF 12 34 56|(% style="width:147px" %)Set the Device EUI.|(% style="width:634px" %)(System will write new value to Device EUI,While Error in format, return AT_PARAM_ERROR)(((277 +|AT+DEUI=A8 40 41 FF FF 12 34 56|Set the Device EUI.|(System will write new value to Device EUI,While Error in format, return AT_PARAM_ERROR)((( 392 392 OK 393 393 ))) 394 394 395 - 396 - 397 397 == 5.6 Network ID == 398 398 399 399 Feature: Get or Set the Network ID.(You can enter this command change only after successful network connection) 400 400 401 -{{info}} 402 -**AT Command: AT+NWKID** 403 -{{/info}} 285 +AT Command: AT+NWKID 404 404 405 -(% border="1" style="background-color:#ffffcc; color:green; width:448.222px" %) 406 -|=(% colspan="3" style="width: 445px;" %)AT+NWKID 407 -|(% style="width:191px" %)**Command Example**|(% style="width:153px" %)**Function**|(% style="width:101px" %)**Response** 408 -|(% style="width:191px" %)AT+NWKID=?|(% style="width:153px" %)Get the Network ID.|(% style="width:101px" %)a8 40 41 ff((( 287 +|=(% colspan="3" %)AT+NWKID 288 +|**Command Example**|**Function**|**Response** 289 +|AT+NWKID=?|Get the Network ID.|a8 40 41 ff((( 409 409 OK 410 410 ))) 411 -| (% style="width:191px" %)AT+NWKID=A8 40 41 FF|(% style="width:153px" %)Set the Network ID.|(% style="width:101px" %)OK292 +|AT+NWKID=A8 40 41 FF|Set the Network ID.|OK 412 412 413 - 414 - 415 415 == 5.7 Network Session Key == 416 416 417 417 Feature: Get or Set the Network Session Key 418 418 419 -{{info}} 420 -**AT Command: AT+NWKSKEY** 421 -{{/info}} 298 +AT Command: AT+NWKSKEY 422 422 423 -(% border="1" style="background-color:#ffffcc; color:green; width:1017.22px" %) 424 -|=(% colspan="3" style="width: 1014px;" %)AT+NWKSKEY 425 -|(% style="width:455px" %)**Command Example**|(% style="width:215px" %)**Function**|(% style="width:343px" %)**Response** 426 -|(% style="width:455px" %)AT+NWKSKEY=?|(% style="width:215px" %)Get the Network Session Key.|(% style="width:343px" %)00 4f 19 25 52 ce 97 09 d7 fa 84 71 db 51 02 92((( 300 +|=(% colspan="3" %)AT+NWKSKEY 301 +|**Command Example**|**Function**|**Response** 302 +|AT+NWKSKEY=?|Get the Network Session Key.|00 4f 19 25 52 ce 97 09 d7 fa 84 71 db 51 02 92((( 427 427 OK 428 428 ))) 429 -| (% style="width:455px" %)AT+NWKSKEY=A8 40 41 FF FF 12 34 56 00 01 02 04 05 06 06 07|(% style="width:215px" %)Set the Network Session Key.|(% style="width:343px" %)OK305 +|AT+NWKSKEY=A8 40 41 FF FF 12 34 56 00 01 02 04 05 06 06 07|Set the Network Session Key.|OK 430 430 431 - 432 - 433 433 = 6. Joining and sending date on LoRaWAN network = 434 434 435 435 == 6.1 Confirm Mode == ... ... @@ -436,18 +436,15 @@ 436 436 437 437 Feature: Get or Set the confirmation mode (0-1). 438 438 439 -{{info}} 440 -**AT Command: AT+CFM** 441 -{{/info}} 313 +AT Command: AT+CFM 442 442 443 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %) 444 -|=(% colspan="3" style="width: 707px;" %)AT+CFM 445 -|(% style="width:155px" %)**Command Example**|(% style="width:205px" %)**Function**|(% style="width:346px" %)**Response** 446 -|(% style="width:155px" %)AT+CFM=?|(% style="width:205px" %)Get the confirmation mode|(% style="width:346px" %)0((( 315 +|=(% colspan="3" %)AT+CFM 316 +|**Command Example**|**Function**|**Response** 317 +|AT+CFM=?|Get the confirmation mode|0((( 447 447 OK 448 448 ))) 449 -| (% style="width:155px" %)AT+CFM=1|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)OK450 -| (% style="width:155px" %)AT+CFM=2|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)While Error in format, return AT_PARAM_ERROR320 +|AT+CFM=1|Set the confirmation mode|OK 321 +|AT+CFM=2|Set the confirmation mode|While Error in format, return AT_PARAM_ERROR 451 451 452 452 Downlink Command: 0x05 453 453 ... ... @@ -458,132 +458,100 @@ 458 458 * Example 1: Downlink Payload: 0501 ~/~/ Set AT+CFM=1 459 459 * Example 2: Downlink Payload: 0500 ~/~/ Set AT+CFM=0 460 460 461 - 462 - 463 463 == 6.2 Confirm Status == 464 464 465 465 Feature: Get confirmation status of the last AT+SEND (0-1). 466 466 467 -{{info}} 468 -**AT Command: AT+CFS** 469 -{{/info}} 336 +AT Command: AT+CFS 470 470 471 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %) 472 -|=(% colspan="3" style="width: 531px;" %)AT+CFS 473 -|(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:178px" %)**Response** 474 -|(% style="width:156px" %)AT+CFS=?|(% style="width:193px" %)Get confirmation status|(% style="width:178px" %)0((( 338 +|=(% colspan="3" %)AT+CFS 339 +|**Command Example**|**Function**|**Response** 340 +|AT+CFS=?|Get confirmation status|0((( 475 475 OK 476 476 ))) 477 477 478 - 479 - 480 480 == 6.3 Join LoRa® Network == 481 481 482 482 Feature: Join network. 483 483 484 -{{info}} 485 -**AT Command: AT+JOIN** 486 -{{/info}} 348 +AT Command: AT+JOIN 487 487 488 -(% border="1" style="background-color:#ffffcc; color:green; width:647.222px" %) 489 -|=(% colspan="3" style="width: 644px;" %)AT+JOIN 490 -|(% style="width:163px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:334px" %)**Response** 491 -|(% style="width:163px" %)AT+JOIN ?|(% style="width:147px" %)Get imformation.|(% style="width:334px" %)AT+JOIN: Join network((( 350 +|=(% colspan="3" %)AT+JOIN 351 +|**Command Example**|**Function**|**Response** 352 +|AT+JOIN ?|Get imformation.|AT+JOIN: Join network((( 492 492 OK 493 493 494 494 While Error in format, return AT_BUSY_ERROR 495 495 ))) 496 496 497 - 498 498 == 6.4 LoRa® Network Join Mode == 499 499 500 500 Feature: Get or Set the Network Join Mode. (0: ABP, 1: OTAA). 501 501 502 -{{info}} 503 -**AT Command: AT+NJM** 504 -{{/info}} 362 +AT Command: AT+NJM 505 505 506 -(% border="1" style="background-color:#ffffcc; color:green; width:753.222px" %) 507 -|=(% colspan="3" style="width: 750px;" %)AT+NJM 508 -|(% style="width:162px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:361px" %)**Response** 509 -|(% style="width:162px" %)AT+NJM=?|(% style="width:227px" %)Get the Network Join Mode|(% style="width:361px" %)1((( 364 +|=(% colspan="3" %)AT+NJM 365 +|**Command Example**|**Function**|**Response** 366 +|AT+NJM=?|Get the Network Join Mode|1((( 510 510 OK 511 511 ))) 512 -| (% style="width:162px" %)AT+NJM=0|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)OK513 -| (% style="width:162px" %)AT+NJM=2|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)While Error in format, return AT_PARAM_ERROR369 +|AT+NJM=0|Set the Network Join Mode|OK 370 +|AT+NJM=2|Set the Network Join Mode|While Error in format, return AT_PARAM_ERROR 514 514 515 -{{info}} 516 -**Downlink Command: 0x20** 517 -{{/info}} 372 +Downlink Command: 0x20 518 518 519 519 Format: Command Code (0x20) followed by 1 bytes mode value. 520 520 521 521 If the downlink payload=2000, it means set the Network Join Mode, while type code is 20. 522 522 523 -* **Example 1:**Downlink Payload:**2000**~/~/ Set AT+NJM=O524 -* **Example 2:**Downlink Payload:**2001**~/~/ Set AT+NJM=1378 +* Example 1: Downlink Payload: 2000 ~/~/ Set AT+NJM=O 379 +* Example 2: Downlink Payload: 2001 ~/~/ Set AT+NJM=1 525 525 526 - 527 527 == 6.5 LoRa® Network Join Status == 528 528 529 529 Feature: LoRa® Network Join Status. 530 530 531 -{{info}} 532 -**AT Command: AT+NJS** 533 -{{/info}} 385 +AT Command: AT+NJS 534 534 535 -(% border="1" style="background-color:#ffffcc; color:green; width:498.222px" %) 536 -|=(% colspan="3" style="width: 495px;" %)AT+NJS 537 -|(% style="width:169px" %)**Command Example**|(% style="width:164px" %)**Function**|(% style="width:161px" %)**Response** 538 -|(% style="width:169px" %)AT+NJS=?|(% style="width:164px" %)Get the join status.|(% style="width:161px" %)0((( 387 +|=(% colspan="3" %)AT+NJS 388 +|**Command Example**|**Function**|**Response** 389 +|AT+NJS=?|Get the join status.|0((( 539 539 OK 540 540 ))) 541 541 542 - 543 543 == 6.6 Print Last Received Data in Raw Format == 544 544 545 545 Feature: Print Last Received Data in Raw Format<port:data>. 546 546 547 -{{info}} 548 -**AT Command: AT+RECV** 549 -{{/info}} 397 +AT Command: AT+RECV 550 550 551 -(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %) 552 -|=(% colspan="3" style="width: 584px;" %)AT+RECV 553 -|(% style="width:161px" %)**Command Example**|(% style="width:272px" %)**Function**|(% style="width:150px" %)**Response** 554 -|(% style="width:161px" %)AT+RECV=?|(% style="width:272px" %)print last received data in raw format.|(% style="width:150px" %)0:((( 399 +|=(% colspan="3" %)AT+RECV 400 +|**Command Example**|**Function**|**Response** 401 +|AT+RECV=?|print last received data in raw format.|0:((( 555 555 OK 556 556 ))) 557 557 558 - 559 559 == 6.7 Print Last Received Data in Binary Format == 560 560 561 561 Feature: Print Last Received Data in Binary Format<port:data>. 562 562 563 -{{info}} 564 -**AT Command: AT+RECVB** 565 -{{/info}} 409 +AT Command: AT+RECVB 566 566 567 -(% border="1" style="background-color:#ffffcc; color:green; width:793.222px" %) 568 -|=(% colspan="3" style="width: 790px;" %)AT+RECVB 569 -|(% style="width:173px" %)**Command Example**|(% style="width:497px" %)**Function**|(% style="width:120px" %)**Response** 570 -|(% style="width:173px" %)AT+RECVB=?|(% style="width:497px" %)print last received data in binary format (with hexadecimal values).|(% style="width:120px" %)2: 0010((( 411 +|=(% colspan="3" %)AT+RECVB 412 +|**Command Example**|**Function**|**Response** 413 +|AT+RECVB=?|print last received data in binary format (with hexadecimal values).|2: 0010((( 571 571 OK 572 572 ))) 573 573 574 - 575 575 == 6.8 Send Text Data == 576 576 577 577 Feature: Send Text Data<port:data>. 578 578 579 -{{info}} 580 -**AT Command: AT+SEND** 581 -{{/info}} 421 +AT Command: AT+SEND 582 582 583 -(% border="1" style="background-color:#ffffcc; color:green; width:991.222px" %) 584 -|=(% colspan="3" style="width: 988px;" %)AT+SEND 585 -|(% style="width:201px" %)**Command Example**|(% style="width:340px" %)**Function**|(% style="width:446px" %)**Response** 586 -|(% style="width:201px" %)AT+SEND=12:hello world|(% style="width:340px" %)Send text data along with the application port.|(% style="width:446px" %)OK((( 423 +|=(% colspan="3" %)AT+SEND 424 +|**Command Example**|**Function**|**Response** 425 +|AT+SEND=12:hello world|Send text data along with the application port.|OK((( 587 587 While Error in format, return 588 588 589 589 AT_BUSY_ERROR/AT_BUSY_ERROR/AT_NO_NETWORK_JOINED ... ... @@ -591,26 +591,21 @@ 591 591 592 592 ))) 593 593 594 - 595 595 == 6.9 Send Hexadecimal Data == 596 596 597 597 Feature: Send hexadecimal data along with the application port. 598 598 599 -{{info}} 600 -**AT Command: AT+SENDB** 601 -{{/info}} 437 +AT Command: AT+SENDB 602 602 603 -(% border="1" style="background-color:#ffffcc; color:green; width:1120.22px" %) 604 -|=(% colspan="3" style="width: 1117px;" %)AT+SENDB 605 -|(% style="width:257px" %)**Command Example**|(% style="width:406px" %)**Function**|(% style="width:453px" %)**Response** 606 -|(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)OK 607 -|(% style="width:257px" %)AT+SENDB=abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)While Error in format, return((( 439 +|=(% colspan="3" %)AT+SENDB 440 +|**Command Example**|**Function**|**Response** 441 +|AT+SENDB=12:abcdef0123456789|Send hexadecimal data along with the application port.|OK 442 +|AT+SENDB=abcdef0123456789|Send hexadecimal data along with the application port.|While Error in format, return((( 608 608 AT_PARAM_ERROR AT_BUSY_ERROR/AT_NO_NETWORK_JOINED 609 609 610 610 611 611 ))) 612 612 613 - 614 614 = 7. LoRaWAN network management = 615 615 616 616 == 7.1 Adaptive Data Rate == ... ... @@ -617,289 +617,231 @@ 617 617 618 618 Feature: Get or Set the Adaptive Data Rate setting. (0: off, 1: on). 619 619 620 -{{info}} 621 -**AT Command: AT+ADR** 622 -{{/info}} 623 623 624 -(% border="1" style="background-color:#ffffcc; color:green; width:683.222px" %) 625 -|=(% colspan="3" style="width: 680px;" %)AT+ADR 626 -|(% style="width:162px" %)**Command Example**|(% style="width:266px" %)**Function**|(% style="width:250px" %)**Response** 627 -|(% style="width:162px" %)AT+ADR=?|(% style="width:266px" %)Get the Adaptive Data Rate setting.|(% style="width:250px" %)1((( 455 +AT Command: AT+ADR 456 + 457 +|=(% colspan="3" %)AT+ADR 458 +|**Command Example**|**Function**|**Response** 459 +|AT+ADR=?|Get the Adaptive Data Rate setting.|1((( 628 628 OK 629 629 ))) 630 -| (% style="width:162px" %)AT+ADR=0|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:250px" %)OK631 -| (% style="width:162px" %)AT+ADR=2|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:250px" %)While Error in format, return(((462 +|AT+ADR=0|Set the Adaptive Data Rate setting.|OK 463 +|AT+ADR=2|Set the Adaptive Data Rate setting.|While Error in format, return((( 632 632 AT_PARAM_ERROR 633 633 ))) 634 634 635 -{{info}} 636 -**Downlink Command: 0x22** 637 -{{/info}} 467 +Downlink Command: 0x22 638 638 639 639 640 640 If the downlink payload=2201, it means setting the adaptive data rate to 1, while type code is 22. 641 641 642 -* **Example 1**: Downlink Payload:**2201**~/~/ Set AT+ADR=1.643 -* **Example 2**: Downlink Payload:**2200FFFF**~/~/ Set AT+ADR=0.472 +* Example 1: Downlink Payload: 2201 ~/~/ Set AT+ADR=1. 473 +* Example 2: Downlink Payload: 2200FFFF ~/~/ Set AT+ADR=0. 644 644 645 - 646 646 == 7.2 LoRa® Class == 647 647 648 648 Feature: Get or Set the Device Class(Currently only support class A, class C). 649 649 650 -{{info}} 651 -**AT Command:AT+CLASS** 652 -{{/info}} 479 +AT Command:AT+CLASS 653 653 654 -(% border="1" style="background-color:#ffffcc; color:green; width:507.222px" %) 655 -|=(% colspan="3" style="width: 504px;" %)AT+CLASS 656 -|(% style="width:163px" %)**Command Example**|(% style="width:166px" %)**Function**|(% style="width:175px" %)**Response** 657 -|(% style="width:163px" %)AT+CLASS=?|(% style="width:166px" %)Get the Device Class.|(% style="width:175px" %)A((( 481 +|=(% colspan="3" %)AT+CLASS 482 +|**Command Example**|**Function**|**Response** 483 +|AT+CLASS=?|Get the Device Class.|A((( 658 658 OK 659 659 ))) 660 -| (% style="width:163px" %)AT+CLASS=C|(% style="width:166px" %)Set the Device Class.|(% style="width:175px" %)OK(((486 +|AT+CLASS=C|Set the Device Class.|OK((( 661 661 662 662 ))) 663 663 664 - 665 665 == 7.3 Duty Cycle Setting == 666 666 667 667 Feature: Get or Set the ETSI Duty Cycle setting - 0=disable, 1=enable - Only for testing. 668 668 669 -{{info}} 670 -**AT Command:AT+DCS** 671 -{{/info}} 494 +AT Command:AT+DCS 672 672 673 -(% border="1" style="background-color:#ffffcc; color:green; width:515.222px" %) 674 -|=(% colspan="3" style="width: 512px;" %)AT+DCS 675 -|(% style="width:165px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:107px" %)**Response** 676 -|(% style="width:165px" %)AT+DCS=?|(% style="width:239px" %)Get the ETSI Duty Cycle setting.|(% style="width:107px" %)1((( 496 +|=(% colspan="3" %)AT+DCS 497 +|**Command Example**|**Function**|**Response** 498 +|AT+DCS=?|Get the ETSI Duty Cycle setting.|1((( 677 677 OK 678 678 ))) 679 -| (% style="width:165px" %)AT+DCS=1|(% style="width:239px" %)Set the ETSI Duty Cycle setting.|(% style="width:107px" %)OK(((501 +|AT+DCS=1|Set the ETSI Duty Cycle setting.|OK((( 680 680 681 681 ))) 682 682 683 - 684 684 == 7.4 Data Rate == 685 685 686 686 Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) . Note: while set Data Rate, please use set Adptive Data Rate, ADR=0 first. otherwise device will response to server's ADR command and change the DR to the setting from server 687 687 688 -{{info}} 689 -**AT Command: AT+DR** 690 -{{/info}} 509 +AT Command: AT+DR 691 691 692 -(% border="1" style="background-color:#ffffcc; color:green; width:466.222px" %) 693 -|=(% colspan="3" style="width: 463px;" %)AT+DR 694 -|(% style="width:156px" %)**Command Example**|(% style="width:167px" %)**Function**|(% style="width:140px" %)**Response** 695 -|(% style="width:156px" %)AT+DR=?|(% style="width:167px" %)Get the Data Rate.|(% style="width:140px" %)5((( 511 +|=(% colspan="3" %)AT+DR 512 +|**Command Example**|**Function**|**Response** 513 +|AT+DR=?|Get the Data Rate.|5((( 696 696 OK 697 697 ))) 698 -| (% style="width:156px" %)AT+DR=2|(% style="width:167px" %)Set the Data Rate.|(% style="width:140px" %)OK(((516 +|AT+DR=2|Set the Data Rate.|OK((( 699 699 700 700 ))) 701 701 702 -{{info}} 703 -**Downlink Command: 0x2200aaFF** 704 -{{/info}} 520 +Downlink Command: 0x2200aaFF 705 705 706 706 707 707 If the downlink payload=220001FF, it means setting the data rate to 1, while type code is 22 00 aa FF. 708 708 709 -* **Example 1**: Downlink Payload:**220001FF**~/~/ Set AT+DR=1.710 -* **Example 2**: Downlink Payload:**220000FF**~/~/ Set AT+DR=0.525 +* Example 1: Downlink Payload: 220001FF ~/~/ Set AT+DR=1. 526 +* Example 2: Downlink Payload: 220000FF ~/~/ Set AT+DR=0. 711 711 712 - 713 713 == 7.5 Frame Counter Downlink == 714 714 715 715 Feature: Get or Set the Frame Counter Downlink. 716 716 717 -{{info}} 718 -**AT Command:AT+FCD** 719 -{{/info}} 532 +AT Command:AT+FCD 720 720 721 -(% border="1" style="background-color:#ffffcc; color:green; width:693.222px" %) 722 -|=(% colspan="3" style="width: 690px;" %)AT+FCD 723 -|(% style="width:162px" %)**Command Example**|(% style="width:258px" %)**Function**|(% style="width:269px" %)**Response** 724 -|(% style="width:162px" %)AT+FCD=?|(% style="width:258px" %)Get the Frame Counter Downlink.|(% style="width:269px" %)0((( 534 +|=(% colspan="3" %)AT+FCD 535 +|**Command Example**|**Function**|**Response** 536 +|AT+FCD=?|Get the Frame Counter Downlink.|0((( 725 725 OK 726 726 ))) 727 -| (% style="width:162px" %)AT+FCD=10|(% style="width:258px" %)Set the Frame Counter Downlink.|(% style="width:269px" %)(System will write new value to FCD)(((539 +|AT+FCD=10|Set the Frame Counter Downlink.|(System will write new value to FCD)((( 728 728 OK 729 729 730 730 731 731 ))) 732 732 733 - 734 734 == 7.6 Frame Counter Uplink == 735 735 736 736 Feature: Get or Set the Frame Counter Uplink. 737 737 738 -{{info}} 739 -**AT Command:AT+FCU** 740 -{{/info}} 549 +AT Command:AT+FCU 741 741 742 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %) 743 -|=(% colspan="3" style="width: 531px;" %)AT+FCU 744 -|(% style="width:177px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:113px" %)**Response** 745 -|(% style="width:177px" %)AT+FCU=?|(% style="width:239px" %)Get the Frame Counter Uplink.|(% style="width:113px" %)0((( 551 +|=(% colspan="3" %)AT+FCU 552 +|**Command Example**|**Function**|**Response** 553 +|AT+FCU=?|Get the Frame Counter Uplink.|0((( 746 746 OK 747 747 ))) 748 -| (% style="width:177px" %)AT+FCU=10|(% style="width:239px" %)Set the Frame Counter Uplink.|(% style="width:113px" %)OK(((556 +|AT+FCU=10|Set the Frame Counter Uplink.|OK((( 749 749 750 750 ))) 751 751 752 - 753 753 == 7.7 Join Accept Delay1 == 754 754 755 755 Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 1 in ms. 756 756 757 -{{info}} 758 -**AT Command:AT+JN1DL** 759 -{{/info}} 564 +AT Command:AT+JN1DL 760 760 761 -(% border="1" style="background-color:#ffffcc; color:green; width:537.222px" %) 762 -|=(% colspan="3" style="width: 534px;" %)AT+JN1DL 763 -|(% style="width:164px" %)**Command Example**|(% style="width:229px" %)**Function**|(% style="width:140px" %)**Response** 764 -|(% style="width:164px" %)AT+JN1DL=?|(% style="width:229px" %)Get the Join Accept Delay.|(% style="width:140px" %)5000((( 566 +|=(% colspan="3" %)AT+JN1DL 567 +|**Command Example**|**Function**|**Response** 568 +|AT+JN1DL=?|Get the Join Accept Delay.|5000((( 765 765 OK 766 766 ))) 767 -| (% style="width:164px" %)AT+JN1DL=10000|(% style="width:229px" %)Set the Join Accept Delay.|(% style="width:140px" %)OK(((571 +|AT+JN1DL=10000|Set the Join Accept Delay.|OK((( 768 768 769 769 ))) 770 770 771 - 772 772 == 7.8 Join Accept Delay2 == 773 773 774 774 Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 2 in ms. 775 775 776 -{{info}} 777 -**AT Command:AT+JN2DL** 778 -{{/info}} 579 +AT Command:AT+JN2DL 779 779 780 -(% border="1" style="background-color:#ffffcc; color:green; width:538.222px" %) 781 -|=(% colspan="3" style="width: 535px;" %)AT+JN2DL 782 -|(% style="width:160px" %)**Command Example**|(% style="width:228px" %)**Function**|(% style="width:146px" %)**Response** 783 -|(% style="width:160px" %)AT+JN2DL=?|(% style="width:228px" %)Get the Join Accept Delay.|(% style="width:146px" %)6000((( 581 +|=(% colspan="3" %)AT+JN2DL 582 +|**Command Example**|**Function**|**Response** 583 +|AT+JN2DL=?|Get the Join Accept Delay.|6000((( 784 784 OK 785 785 ))) 786 -| (% style="width:160px" %)AT+JN2DL=20000|(% style="width:228px" %)Set the Join Accept Delay.|(% style="width:146px" %)OK(((586 +|AT+JN2DL=20000|Set the Join Accept Delay.|OK((( 787 787 788 788 ))) 789 789 790 - 791 791 == 7.9 Public Network Mode == 792 792 793 793 Feature: Get or Set the public network mode. (0: off, 1: on) 794 794 795 -{{info}} 796 -**AT Command:AT+PNM** 797 -{{/info}} 594 +AT Command:AT+PNM 798 798 799 -(% border="1" style="background-color:#ffffcc; color:green; width:667.222px" %) 800 -|=(% colspan="3" style="width: 664px;" %)AT+PNM 801 -|(% style="width:166px" %)**Command Example**|(% style="width:225px" %)**Function**|(% style="width:272px" %)**Response** 802 -|(% style="width:166px" %)AT+PNM=?|(% style="width:225px" %)Get the public network mode.|(% style="width:272px" %)1((( 596 +|=(% colspan="3" %)AT+PNM 597 +|**Command Example**|**Function**|**Response** 598 +|AT+PNM=?|Get the public network mode.|1((( 803 803 OK 804 804 ))) 805 -| (% style="width:166px" %)AT+PNM=1|(% style="width:225px" %)Set the public network mode.|(% style="width:272px" %)(System will write new value to PNM)(((601 +|AT+PNM=1|Set the public network mode.|(System will write new value to PNM)((( 806 806 OK 807 807 808 808 809 809 ))) 810 810 811 - 812 812 == 7.10 Receive Delay1 == 813 813 814 814 Feature: Get or Set the delay between the end of the Tx and the Rx Window 1 in ms 815 815 816 -{{info}} 817 -**AT Command:AT+RX1DL** 818 -{{/info}} 611 +AT Command:AT+RX1DL 819 819 820 -(% border="1" style="background-color:#ffffcc; color:green; width:408.222px" %) 821 -|=(% colspan="3" style="width: 405px;" %)AT+RX1DL 822 -|(% style="width:155px" %)**Command Example**|(% style="width:128px" %)**Function**|(% style="width:122px" %)**Response** 823 -|(% style="width:155px" %)AT+RX1DL=?|(% style="width:128px" %)Get the delay.|(% style="width:122px" %)1000((( 613 +|=(% colspan="3" %)AT+RX1DL 614 +|**Command Example**|**Function**|**Response** 615 +|AT+RX1DL=?|Get the delay.|1000((( 824 824 OK 825 825 ))) 826 -| (% style="width:155px" %)AT+RX1DL=1500|(% style="width:128px" %)Set the delay.|(% style="width:122px" %)OK(((618 +|AT+RX1DL=1500|Set the delay.|OK((( 827 827 828 828 ))) 829 829 622 +== 7.11Receive Delay2 == 830 830 831 -== 7.11 Receive Delay2 == 832 - 833 833 Feature: Get or Set the delay between the end of the Tx and the Rx Window 2 in ms 834 834 835 -{{info}} 836 -**AT Command:AT+RX2DL** 837 -{{/info}} 626 +AT Command:AT+RX2DL 838 838 839 -(% border="1" style="background-color:#ffffcc; color:green; width:481.222px" %) 840 -|=(% colspan="3" style="width: 478px;" %)AT+RX2DL 841 -|(% style="width:175px" %)**Command Example**|(% style="width:152px" %)**Function**|(% style="width:150px" %)**Response** 842 -|(% style="width:175px" %)AT+RX2DL=?|(% style="width:152px" %)Get the delay.|(% style="width:150px" %)2000((( 628 +|=(% colspan="3" %)AT+RX2DL 629 +|**Command Example**|**Function**|**Response** 630 +|AT+RX2DL=?|Get the delay.|2000((( 843 843 OK 844 844 ))) 845 -| (% style="width:175px" %)AT+RX2DL=2500|(% style="width:152px" %)Set the delay.|(% style="width:150px" %)OK(((633 +|AT+RX2DL=2500|Set the delay.|OK((( 846 846 847 847 ))) 848 848 849 - 850 850 == 7.12 Rx2 Window Data Rate == 851 851 852 852 Feature: Get or Set the Rx2 window data rate (0-7 corresponding to DR_X) 853 853 854 -{{info}} 855 -**AT Command:AT+RX2DR** 856 -{{/info}} 641 +AT Command:AT+RX2DR 857 857 858 -(% border="1" style="background-color:#ffffcc; color:green; width:525.222px" %) 859 -|=(% colspan="3" style="width: 522px;" %)AT+RX2DR 860 -|(% style="width:160px" %)**Command Example**|(% style="width:232px" %)**Function**|(% style="width:130px" %)**Response** 861 -|(% style="width:160px" %)AT+RX2DR=?|(% style="width:232px" %)Get the Rx2 window data rate.|(% style="width:130px" %)2((( 643 +|=(% colspan="3" %)AT+RX2DR 644 +|**Command Example**|**Function**|**Response** 645 +|AT+RX2DR=?|Get the Rx2 window data rate.|2((( 862 862 OK 863 863 ))) 864 -| (% style="width:160px" %)AT+RX2DR=6|(% style="width:232px" %)Set the Rx2 window data rate.|(% style="width:130px" %)OK(((648 +|AT+RX2DR=6|Set the Rx2 window data rate.|OK((( 865 865 866 866 ))) 867 867 868 - 869 869 == 7.13 Rx2 Window Frequency == 870 870 871 871 Feature: Get or Set the Rx2 window frequency 872 872 873 -{{info}} 874 -**AT Command:AT+RX2FQ** 875 -{{/info}} 656 +AT Command:AT+RX2FQ 876 876 877 -(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %) 878 -|=(% colspan="3" style="width: 584px;" %)AT+RX2FQ 879 -|(% style="width:183px" %)**Command Example**|(% style="width:240px" %)**Function**|(% style="width:160px" %)**Response** 880 -|(% style="width:183px" %)AT+RX2FQ=?|(% style="width:240px" %)Get the Rx2 window frequency.|(% style="width:160px" %)434665000((( 658 +|=(% colspan="3" %)AT+RX2FQ 659 +|**Command Example**|**Function**|**Response** 660 +|AT+RX2FQ=?|Get the Rx2 window frequency.|434665000((( 881 881 OK 882 882 ))) 883 -| (% style="width:183px" %)AT+RX2FQ=434665000|(% style="width:240px" %)Set the Rx2 window frequency.|(% style="width:160px" %)OK(((663 +|AT+RX2FQ=434665000|Set the Rx2 window frequency.|OK((( 884 884 885 885 ))) 886 886 887 - 888 888 == 7.14 Transmit Power == 889 889 890 890 Feature: Get or Set the Transmit Power(0-5, MAX:0, MIN:5, according to LoRaWAN Spec, or 40=10dB, 41 = 11dB, …, 50 = 20dB which is out of LoRaWAN spec. ) 891 891 892 -{{info}} 893 -**AT Command:AT+TXP** 894 -{{/info}} 671 +AT Command:AT+TXP 895 895 896 -(% border="1" style="background-color:#ffffcc; color:green; width:465.222px" %) 897 -|=(% colspan="3" style="width: 462px;" %)AT+TXP 898 -|(% style="width:161px" %)**Command Example**|(% style="width:189px" %)**Function**|(% style="width:112px" %)**Response** 899 -|(% style="width:161px" %)AT+TXP=?|(% style="width:189px" %)Get the Transmit Power.|(% style="width:112px" %)0((( 673 +|=(% colspan="3" %)AT+TXP 674 +|**Command Example**|**Function**|**Response** 675 +|AT+TXP=?|Get the Transmit Power.|0((( 900 900 OK 901 901 ))) 902 -| (% style="width:161px" %)AT+TXP=1|(% style="width:189px" %)Set the Transmit Power.|(% style="width:112px" %)OK(((678 +|AT+TXP=1|Set the Transmit Power.|OK((( 903 903 904 904 ))) 905 905 ... ... @@ -907,190 +907,146 @@ 907 907 908 908 If the downlink payload=22000100, it means setting the TXP to 0. 909 909 910 -* **Example 1**: Downlink Payload:**22000102**~/~/ Set AT+TXP=2.911 -* **Example 2**: Downlink Payload:**220000FF**~/~/ Set AT+TXP=0.686 +* Example 1: Downlink Payload: 22000102 ~/~/ Set AT+TXP=2. 687 +* Example 2: Downlink Payload: 220000FF ~/~/ Set AT+TXP=0. 912 912 913 - 914 914 == 7.15 RSSI of the Last Received Packet == 915 915 916 916 Feature: Get or Set the Rx2 window frequency 917 917 918 -{{info}} 919 -**AT Command:AT+RSSI** 920 -{{/info}} 693 +AT Command:AT+RSSI 921 921 922 -(% border="1" style="background-color:#ffffcc; color:green; width:557.222px" %) 923 -|=(% colspan="3" style="width: 554px;" %)AT+RSSI 924 -|(% style="width:164px" %)**Command Example**|(% style="width:289px" %)**Function**|(% style="width:100px" %)**Response** 925 -|(% style="width:164px" %)AT+RSSI=?|(% style="width:289px" %)Get the RSSI of the last received packet.|(% style="width:100px" %)0((( 695 +|=(% colspan="3" %)AT+RSSI 696 +|**Command Example**|**Function**|**Response** 697 +|AT+RSSI=?|Get the RSSI of the last received packet.|0((( 926 926 OK 927 927 ))) 928 928 929 - 930 930 == 7.16 SNR of the Last Received Packet == 931 931 932 932 Feature: Get the SNR of the last received packet 933 933 934 -{{info}} 935 -**AT Command:AT+SNR** 936 -{{/info}} 705 +AT Command:AT+SNR 937 937 938 -(% border="1" style="background-color:#ffffcc; color:green; width:571.222px" %) 939 -|=(% colspan="3" style="width: 568px;" %)AT+SNR 940 -|(% style="width:164px" %)**Command Example**|(% style="width:290px" %)**Function**|(% style="width:113px" %)**Response** 941 -|(% style="width:164px" %)AT+SNR=?|(% style="width:290px" %)Get the RSSI of the last received packet.|(% style="width:113px" %)0((( 707 +|=(% colspan="3" %)AT+SNR 708 +|**Command Example**|**Function**|**Response** 709 +|AT+SNR=?|Get the RSSI of the last received packet.|0((( 942 942 OK 943 943 ))) 944 944 945 - 946 946 == 7.17 Application Port == 947 947 948 948 Feature: Get or set the application port. 949 949 950 -{{info}} 951 -**AT Command: AT+PORT** 952 -{{/info}} 717 +AT Command: AT+PORT 953 953 954 -(% border="1" style="background-color:#ffffcc; color:green; width:500.222px" %) 955 -|=(% colspan="3" style="width: 497px;" %)AT+PORT 956 -|(% style="width:157px" %)**Command Example**|(% style="width:204px" %)**Function**|(% style="width:135px" %)**Response** 957 -|(% style="width:157px" %)AT+PORT=?|(% style="width:204px" %)Get the application port|(% style="width:135px" %)21((( 719 +|=(% colspan="3" %)AT+PORT 720 +|**Command Example**|**Function**|**Response** 721 +|AT+PORT=?|Get the application port|21((( 958 958 OK 959 959 ))) 960 -| (% style="width:157px" %)AT+PORT=21|(% style="width:204px" %)Set the application port|(% style="width:135px" %)OK724 +|AT+PORT=21|Set the application port|OK 961 961 962 -{{info}} 963 -**Downlink Command: 0x23** 964 -{{/info}} 726 +Downlink Command: 0x23 965 965 966 966 Format: Command Code (0x23) followed by 1 bytes port value. 967 967 968 968 If the downlink payload=2301, it means set the application port to 1, while type code is 23. 969 969 970 -* **Example 1**: Downlink Payload:**2301**~/~/ set the application port to 1971 -* **Example 2**: Downlink Payload:**2305**~/~/ set the application port to 5732 +* Example 1: Downlink Payload: 2301 ~/~/ set the application port to 1 733 +* Example 2: Downlink Payload: 2305 ~/~/ set the application port to 5 972 972 973 - 974 974 == 7.18 Single Channel Mode == 975 975 976 976 Feature:Get or Set Frequency (Unit: Hz) for Single Channel Mode. 977 977 978 -{{info}} 979 -**AT Command: AT+CHS** 980 -{{/info}} 739 +AT Command: AT+CHS 981 981 982 -(% border="1" style="background-color:#ffffcc; color:green; width:603.222px" %) 983 -|=(% colspan="3" style="width: 600px;" %)AT+CHS 984 -|(% style="width:182px" %)**Command Example**|(% style="width:295px" %)**Function**|(% style="width:122px" %)**Response** 985 -|(% style="width:182px" %)AT+CHS=?|(% style="width:295px" %)Get Frequency for Single Channel Mode|(% style="width:122px" %)0((( 741 +|=(% colspan="3" %)AT+CHS 742 +|**Command Example**|**Function**|**Response** 743 +|AT+CHS=?|Get Frequency for Single Channel Mode|0((( 986 986 OK 987 987 ))) 988 -| (% style="width:182px" %)AT+CHS=868100000|(% style="width:295px" %)Set Frequency for Single Channel Mode|(% style="width:122px" %)OK746 +|AT+CHS=868100000|Set Frequency for Single Channel Mode|OK 989 989 990 - 991 991 == 7.19 Eight Channel Mode == 992 992 993 993 Feature: Get or Set eight channels mode,Only for US915,AU915,CN470. 994 994 995 -{{info}} 996 -**AT Command: AT+CHE** 997 -{{/info}} 752 +AT Command: AT+CHE 998 998 999 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %) 1000 -|=(% colspan="3" style="width: 707px;" %)AT+CHE 1001 -|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response** 1002 -|(% style="width:160px" %)AT+CHE=?|(% style="width:198px" %)Get eight channels mode|(% style="width:349px" %)1((( 754 +|=(% colspan="3" %)AT+CHE 755 +|**Command Example**|**Function**|**Response** 756 +|AT+CHE=?|Get eight channels mode|1((( 1003 1003 902.3 902.5 902.7 902.9 903.1 903.3 903.5 903.7 1004 1004 1005 1005 OK 1006 1006 ))) 1007 -| (% style="width:160px" %)AT+CHE=1|(% style="width:198px" %)Set eight channels mode|(% style="width:349px" %)OK761 +|AT+CHE=1|Set eight channels mode|OK 1008 1008 1009 -{{info}} 1010 -**Downlink Command: 0x24** 1011 -{{/info}} 763 +Downlink Command: 0x24 1012 1012 1013 1013 Format: Command Code (0x24) followed by 1 bytes channel value. 1014 1014 1015 1015 If the downlink payload=2401, it means set channel mode to 1, while type code is 24. 1016 1016 1017 -* **Example 1**: Downlink Payload: 2401 ~/~/ set channel mode to 11018 -* **Example 2**: Downlink Payload: 2405 ~/~/ set channel mode to 5769 +* Example 1: Downlink Payload: 2401 ~/~/ set channel mode to 1 770 +* Example 2: Downlink Payload: 2405 ~/~/ set channel mode to 5 1019 1019 1020 - 1021 1021 == 7.20 Get or Set RXwindows1 timeout == 1022 1022 1023 1023 Feature:Get or Set the number of symbols to detect and timeout from RXwindow1(0 to 255). 1024 1024 1025 -{{info}} 1026 -**AT Command: AT+RX1WTO** 1027 -{{/info}} 776 +AT Command: AT+RX1WTO 1028 1028 1029 -(% border="1" style="background-color:#ffffcc; color:green; width:460.222px" %) 1030 -|=(% colspan="3" style="width: 457px;" %)AT+ RX1WTO 1031 -|(% style="width:163px" %)**Command Example**|(% style="width:201px" %)**Function**|(% style="width:93px" %)**Response** 1032 -|(% style="width:163px" %)AT+RX1WTO=?|(% style="width:201px" %)Get RXwindows1 timeout|(% style="width:93px" %)14((( 778 +|=(% colspan="3" %)AT+ RX1WTO 779 +|**Command Example**|**Function**|**Response** 780 +|AT+RX1WTO=?|Get RXwindows1 timeout|14((( 1033 1033 OK 1034 1034 ))) 1035 -| (% style="width:163px" %)AT+RX1WTO=60|(% style="width:201px" %)Set RXwindows1 timeout|(% style="width:93px" %)OK783 +|AT+RX1WTO=60|Set RXwindows1 timeout|OK 1036 1036 1037 -((( 1038 -**AT+RX1TWO** is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph. 1039 -))) 785 +AT+RX1TWO is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph. 1040 1040 1041 -[[image:image -20220526162535-1.png]]787 +[[~[~[image:https://wiki.dragino.com/images/thumb/5/51/RX1WTO.JPG/600px-RX1WTO.JPG~|~|alt="RX1WTO.JPG" height="239" width="600"~]~]>>url:https://wiki.dragino.com/index.php/File:RX1WTO.JPG]] 1042 1042 1043 -((( 1044 1044 Increasing thisvalue is equal to extending the time that the receiving window is opened, butthe corresponding power consumption will also increase. Properly increasingthis value can increase the success rate of the downlink. 1045 1045 1046 - 1047 -))) 1048 - 1049 1049 == 7.21 Get or Set RXwindows2 timeout == 1050 1050 1051 1051 Feature:Get or Set the number of symbols to detect and timeout from RXwindow2(0 to 255). 1052 1052 1053 -{{info}} 1054 -**AT Command: AT+RX2WTO** 1055 -{{/info}} 795 +AT Command: AT+RX2WTO 1056 1056 1057 -(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %) 1058 -|=(% colspan="3" style="width: 494px;" %)AT+ RX2WTO 1059 -|(% style="width:190px" %)**Command Example**|(% style="width:199px" %)**Function**|(% style="width:104px" %)**Response** 1060 -|(% style="width:190px" %)AT+RX2WTO=?|(% style="width:199px" %)Get RXwindows2 timeout|(% style="width:104px" %)7((( 797 +|=(% colspan="3" %)AT+ RX2WTO 798 +|**Command Example**|**Function**|**Response** 799 +|AT+RX2WTO=?|Get RXwindows2 timeout|7((( 1061 1061 OK 1062 1062 ))) 1063 -| (% style="width:190px" %)AT+RX2WTO=20|(% style="width:199px" %)Set RXwindows2 timeout|(% style="width:104px" %)OK802 +|AT+RX2WTO=20|Set RXwindows2 timeout|OK 1064 1064 1065 - 1066 1066 == 7.22 Setting up uplinkdwelltime (as923, au915) == 1067 1067 1068 1068 Feature: Get or Set uplinkdwelltime 1069 1069 1070 -{{info}} 1071 -**AT Command: AT+DWELLT** 1072 -{{/info}} 808 +AT Command: AT+DWELLT 1073 1073 1074 -(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %) 1075 -|=(% colspan="3" style="width: 494px;" %)AT+DWELLT 1076 -|(% style="width:183px" %)**Command Example**|(% style="width:179px" %)**Function**|(% style="width:131px" %)**Response** 1077 -|(% style="width:183px" %)AT+DWELLT=?|(% style="width:179px" %)Get uplinkdwelltime|(% style="width:131px" %)1((( 810 +|=(% colspan="3" %)AT+DWELLT 811 +|**Command Example**|**Function**|**Response** 812 +|AT+DWELLT=?|Get uplinkdwelltime|1((( 1078 1078 OK 1079 1079 ))) 1080 -| (% style="width:183px" %)AT+DWELLT=0|(% style="width:179px" %)Set uplinkdwelltime|(% style="width:131px" %)OK815 +|AT+DWELLT=0|Set uplinkdwelltime|OK 1081 1081 1082 -{{info}} 1083 -**Downlink Command: 0x25** 1084 -{{/info}} 817 +Downlink Command: 0x25 1085 1085 1086 1086 Format: Command Code (0x25) followed by 1 bytes state value. 1087 1087 1088 1088 If the downlink payload=2501, it means set uplinkdwelltime to 1, while type code is 25. 1089 1089 1090 -* **Example 1**: Downlink Payload:**2501**~/~/ set uplinkdwelltime to 11091 -* **Example 2**: Downlink Payload:**2500**~/~/ set uplinkdwelltime to 0823 +* Example 1: Downlink Payload: 2501 ~/~/ set uplinkdwelltime to 1 824 +* Example 2: Downlink Payload: 2500 ~/~/ set uplinkdwelltime to 0 1092 1092 1093 - 1094 1094 == 7.23 Set Packet Receiving Response Level == 1095 1095 1096 1096 Feature: Get or Set packet receiving response level. This feature is used to set compatible with different LoRaWAN servers. If RPL doesn;t match , user will see strange message in the server portal. ... ... @@ -1097,11 +1097,11 @@ 1097 1097 1098 1098 RPL value: 1099 1099 1100 -* **AT+RPL=0:**Device won't immediately reply any downlink commands from platform.1101 -* **AT+RPL=1:**Device will immediately reply message to Unconfirmed Data Down. Payload is 0x00.1102 -* **AT+RPL=2:**Device will immediately reply message to Confirmed Data Down. Payload is 0x00 and requied response header for this command.1103 -* **AT+RPL=3:**Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command.1104 -* **AT+RPL=4:**Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands.832 +* AT+RPL=0: Device won't immediately reply any downlink commands from platform. 833 +* AT+RPL=1: Device will immediately reply message to Unconfirmed Data Down. Payload is 0x00. 834 +* AT+RPL=2: Device will immediately reply message to Confirmed Data Down. Payload is 0x00 and requied response header for this command. 835 +* AT+RPL=3: Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command. 836 +* AT+RPL=4: Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands. 1105 1105 1106 1106 Case Analyes: 1107 1107 ... ... @@ -1109,46 +1109,37 @@ 1109 1109 * For Class C devices used in ChirpStack, need to set AT+RPL=4 because Chirpstack require immedietely reply message to MAC Command. 1110 1110 * For Class C devices used in TTI, need to set AT+RPL=4 because TTI require immediately reply message to Confirmed Data Down & MAC Command. 1111 1111 1112 -{{info}} 1113 -**AT Command: AT+RPL** 1114 -{{/info}} 844 +AT Command: AT+RPL 1115 1115 1116 -(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %) 1117 -|=(% colspan="3" style="width: 533px;" %)AT+RPL 1118 -|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response** 1119 -|(% style="width:160px" %)AT+RPL=?|(% style="width:263px" %)Get packet receiving response level|(% style="width:109px" %)1((( 846 +|=(% colspan="3" %)AT+RPL 847 +|**Command Example**|**Function**|**Response** 848 +|AT+RPL=?|Get packet receiving response level|1((( 1120 1120 OK 1121 1121 ))) 1122 -| (% style="width:160px" %)AT+RPL=0|(% style="width:263px" %)Set packet receiving response level|(% style="width:109px" %)OK851 +|AT+RPL=0|Set packet receiving response level|OK 1123 1123 1124 -{{info}} 1125 -**Downlink Command: 0x21** 1126 -{{/info}} 853 +Downlink Command: 0x21 1127 1127 1128 1128 Format: Command Code (0x21) followed by 1 bytes level value. 1129 1129 1130 1130 If the downlink payload=2101, it means set packet receiving response level to 1, while type code is 21. 1131 1131 1132 -* **Example 1**: Downlink Payload:**2101**~/~/ set packet receiving response level to 11133 -* **Example 2**: Downlink Payload:**2102**~/~/ set packet receiving response level to 2859 +* Example 1: Downlink Payload: 2101 ~/~/ set packet receiving response level to 1 860 +* Example 2: Downlink Payload: 2102 ~/~/ set packet receiving response level to 2 1134 1134 1135 - 1136 1136 = 8. AT Commands Combination = 1137 1137 1138 1138 == 8.1 Set a fix RX2DR for downlink window == 1139 1139 1140 -* **AT+ADR=0**~-~-> Disable ADR first1141 -* **AT+RX2DR=xxxx**~-~-> Set xxxx to your wanted DataRate866 +* AT+ADR=0 ~-~-> Disable ADR first 867 +* AT+RX2DR=xxxx ~-~-> Set xxxx to your wanted DataRate 1142 1142 1143 - 1144 1144 == 8.2 Use Downlink Command to set a fix uplink DR == 1145 1145 1146 -{{info}} 1147 -**Downlink Command: 0x22000500** 1148 -{{/info}} 871 +Downlink Command: 0x22000500 1149 1149 1150 1150 Same as: 1151 1151 1152 -* AT+ADR=0 ||anchor="H7.1AdaptiveDataRate"]]1153 -* AT+DR=5 ||anchor="H7.4DataRate"]]1154 -* AT+TXP=0 ||anchor="H7.14TransmitPower"]]875 +* AT+ADR=0 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Adaptive_Data_Rate]] 876 +* AT+DR=5 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Data_Rate]] 877 +* AT+TXP=0 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Transmit_Power]]
- image-20220511120050-1.png
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -XWiki.Xiaoling - Size
-
... ... @@ -1,1 +1,0 @@ 1 -136.3 KB - Content
- image-20220526162535-1.png
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -XWiki.Xiaoling - Size
-
... ... @@ -1,1 +1,0 @@ 1 -149.4 KB - Content