Changes for page End Device AT Commands and Downlink Command
Last modified by kai on 2024/09/06 10:00
Summary
-
Page properties (1 modified, 0 added, 0 removed)
-
Attachments (0 modified, 0 added, 2 removed)
Details
- Page properties
-
- Content
-
... ... @@ -1,9 +1,8 @@ 1 - **Contents：**1 +Contens 2 2 3 3 {{toc/}} 4 4 5 5 6 - 7 7 = 1. Introduction = 8 8 9 9 Dragino LoRaWAN End Node support two types of AT Commands and Downlink Commands: ... ... @@ -11,93 +11,48 @@ 11 11 * **Common Commands:** They should be available for each sensor, such as: change uplink interval, reset device. 12 12 * **Sensor Related Commands:** Only for special sensor, such as control relay, poll RS485 device. 13 13 14 -((( 15 15 **This page shows the common commands since Dragino LoRaWAN stack DR-LWS-005. Make sure the end node support stack higher than DR-LWS-005 before checking this page.** 16 16 17 -))) 18 18 19 19 = 2. How to use AT Commands or Downlink command = 20 20 21 21 * For AT Command , See Devices User Manual for Device. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]] 22 22 * For LoRaWAN Downlink: The gateway transfer downlink command in HEX format. This page shows the HEX format downlink code for each command. but some servers use base64 as downlink code. Below are reference for how to use downlink command: 23 -** Use HEX format to send a downlink: [[TTN v3>>Notes 24 -** Use Base64 format to send a downlink: [[Chirpstack>>Notes 25 -** See use note for more serves [[Servers Note>>doc :Main.WebHome]](IoT LoRaWANServer)20 +** Use HEX format to send a downlink: [[TTN v3>>url:https://wiki.dragino.com/index.php/Notes_for_TTN#Send_Downlink_message]] 21 +** Use Base64 format to send a downlink: [[Chirpstack>>url:https://wiki.dragino.com/index.php/Notes_for_ChirpStack#Downlink]]. 22 +** See use note for more serves [[Servers Note>>url:https://wiki.dragino.com/index.php/Main_Page#Use_Note_for_Server]] 26 26 27 27 = 3. Support End Node and firmware version = 28 28 29 -(% border="1" style="background-color:#ffffcc; color:green; width:966px" %) 30 -|=(% colspan="3" style="width: 963px;" %)((( 31 -Dragino STM32 base hardware Firmware / LoRaWAN stack list 32 -))) 33 -|(% style="width:187px" %)((( 34 -**Model** 35 -)))|(% style="width:330px" %)((( 36 -**Description** 37 -)))|(% style="width:445px" %)((( 38 -**Firmware Version <~-~-> Stack Version** 39 -))) 40 -|(% style="width:187px" %)((( 41 -[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]], 42 -)))|(% style="width:330px" %)((( 43 -Open Source Generic LoRaWAN Sensor Node 44 -)))|(% style="width:445px" %)((( 45 -((( 46 -LSN50 v1.6.0 <~-~-> DR-LWS-003; 47 -))) 48 48 49 -((( 50 -((( 27 +(% style="background-color:#ffffcc; color:green; width:1039.22px" %) 28 +|(% colspan="3" style="width:1036px" %)** Dragino STM32 base hardware Firmware / LoRaWAN stack list** 29 +|(% style="width:216px" %)**Model**|(% style="width:346px" %)**Description**|(% style="width:472px" %)**Firmware Version <~-~-> Stack Version** 30 +|(% style="width:216px" %)[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],|(% style="width:346px" %)Open Source Generic LoRaWAN Sensor Node|(% style="width:472px" %)LSN50 v1.6.0 <~-~-> DR-LWS-003;((( 51 51 LSN50 v1.7.0 <~-~-> DR-LWS-005; ~-~-> Support since this version 52 52 ))) 53 -))) 54 -))) 55 -|(% style="width:187px" %)((( 56 -[[LGT92>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/142-lgt-92.html]], 57 -)))|(% style="width:330px" %)((( 58 -LoRaWAN GPS Tracker 59 -)))|(% style="width:445px" %)((( 60 -((( 61 -LGT92 v1.6.3 <~-~-> DR-LWS-003; 62 -))) 33 +|(% style="width:216px" %) |(% style="width:346px" %) |(% style="width:472px" %) 34 +|(% style="width:216px" %) |(% style="width:346px" %) |(% style="width:472px" %) 35 +|(% style="width:216px" %) |(% style="width:346px" %) |(% style="width:472px" %) 36 +|(% style="width:216px" %) |(% style="width:346px" %) |(% style="width:472px" %) 63 63 64 -((( 65 -((( 38 + 39 + 40 +(% border="1" style="background-color:#ffffcc; color:green; width:942.222px" %) 41 +|=(% colspan="3" style="width: 939px;" %) Dragino STM32 base hardware Firmware / LoRaWAN stack list 42 +|(% style="width:187px" %)**Model**|(% style="width:306px" %)**Description**|(% style="width:443px" %)**Firmware Version <~-~-> Stack Version** 43 +|(% style="width:187px" %)[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],|(% style="width:306px" %)Open Source Generic LoRaWAN Sensor Node|(% style="width:443px" %)LSN50 v1.6.0 <~-~-> DR-LWS-003;((( 44 +LSN50 v1.7.0 <~-~-> DR-LWS-005; ~-~-> Support since this version 45 +))) 46 +|(% style="width:187px" %)[[LGT92>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/142-lgt-92.html]],|(% style="width:306px" %)LoRaWAN GPS Tracker|(% style="width:443px" %)LGT92 v1.6.3 <~-~-> DR-LWS-003;((( 66 66 LGT92 v1.6.4 <~-~-> DR-LWS-005;~-~-> Support since this version 67 67 ))) 68 -))) 69 -))) 70 -|(% style="width:187px" %)((( 71 -[[LBT1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/165-lbt1.html]], 72 -)))|(% style="width:330px" %)((( 73 -LoRaWAN BLE Indoor Tracker 74 -)))|(% style="width:445px" %)((( 75 -LBT1 v1.0 <~-~-> DR-LWS-005; 76 -))) 77 -|(% style="width:187px" %)((( 78 -[[RS485-LN>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/154-rs485-ln.html]], 79 -)))|(% style="width:330px" %)((( 80 -LoRaWAN RS485 Modbus Converter 81 -)))|(% style="width:445px" %)((( 82 -RS485-LN v1.3 <~-~-> DR-LWS-005; 83 -))) 84 -|(% style="width:187px" %)((( 85 -[[LHT65>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/151-lht65.html]], 86 -)))|(% style="width:330px" %)((( 87 -LoRaWAN Temperature & Humidity Sensor 88 -)))|(% style="width:445px" %)((( 89 -((( 90 -LHT65 v1.7 <~-~-> DR-LWS-003; 91 -))) 92 - 93 -((( 94 -((( 49 +|(% style="width:187px" %)[[LBT1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/165-lbt1.html]],|(% style="width:306px" %)LoRaWAN BLE Indoor Tracker|(% style="width:443px" %)LBT1 v1.0 <~-~-> DR-LWS-005; 50 +|(% style="width:187px" %)[[RS485-LN>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/154-rs485-ln.html]],|(% style="width:306px" %)LoRaWAN RS485 Modbus Converter|(% style="width:443px" %)RS485-LN v1.3 <~-~-> DR-LWS-005; 51 +|(% style="width:187px" %)[[LHT65>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/151-lht65.html]],|(% style="width:306px" %)LoRaWAN Temperature & Humidity Sensor|(% style="width:443px" %)LHT65 v1.7 <~-~-> DR-LWS-003;((( 95 95 LHT65 v1.8.0 <~-~-> DR-LWS-005;~-~-> Support since this version 96 96 ))) 97 -))) 98 -))) 99 99 100 - 101 101 = 4. System Management Commands = 102 102 103 103 == 4.1 Change Uplink Interval == ... ... @@ -106,11 +106,11 @@ 106 106 107 107 (% class="box infomessage" %) 108 108 ((( 109 - **AT Command: AT+TDC**63 +AT Command: AT+TDC 110 110 ))) 111 111 112 112 (% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %) 113 -|=(% colspan="3" style="width: 724px;" %)AT+TDC 67 +|=(% colspan="3" style="width: 724px;" %) AT+TDC 114 114 |(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response** 115 115 |(% style="width:165px" %)AT+TDC=?|(% style="width:227px" %)Show current transmit Interval|(% style="width:329px" %)30000((( 116 116 OK ... ... @@ -121,33 +121,27 @@ 121 121 Set transmit interval to 60000ms = 60 seconds 122 122 ))) 123 123 124 -{{info}} 125 125 **Downlink Command: 0x01** 126 -{{/info}} 127 127 128 -((( 129 129 Format: Command Code (0x01) followed by 3 bytes time value. 130 -))) 131 131 132 -((( 133 133 If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01. 134 -))) 135 135 136 136 * **Example 1**: Downlink Payload:** 0100001E** ~/~/ Set Transmit Interval (TDC) = 30 seconds 137 137 * **Example 2**: Downlink Payload:** 0100003C** ~/~/ Set Transmit Interval (TDC) = 60 seconds 138 138 139 - 140 140 == 4.2 Reboot End Node == 141 141 142 142 Feature: Reboot End Node to perform a new OTAA or ABP Join. 143 143 144 144 {{info}} 145 - **AT Command: ATZ**92 +AT Command: ATZ 146 146 {{/info}} 147 147 148 148 (% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %) 149 -|=(% colspan="3" %)ATZ: Trig a reset of the MCU 96 +|=(% colspan="3" %) ATZ: Trig a reset of the MCU 150 150 |**Command Example**|**Function**|**Response** 98 +~)~)~) 151 151 |ATZ|Reset MCU|((( 152 152 Device reset and show booting info 153 153 ... ... @@ -162,56 +162,35 @@ 162 162 <followed by the Tx and Rx information> 163 163 ))) 164 164 165 -{{info}} 166 -**Downlink Command: 0x04** 167 -{{/info}} 113 +Downlink Command: 0x04 168 168 169 -((( 170 170 Format: Command Code (0x04) followed by FF. 171 -))) 172 172 173 -((( 174 -If the downlink payload=**04FF**, the end node will reboot. 117 +If the downlink payload=04FF, the end node will reboot. 175 175 176 - 177 -))) 178 - 179 179 == 4.3 Reset to factory Default == 180 180 181 181 Feature: Reset the parameters to Factory Default, factory default value depends on the firmware settings, the OTAA and ABP keys will reserve after this command. 182 182 183 -{{info}} 184 -**AT Command: AT+FDR** 185 -{{/info}} 123 +AT Command: AT+FDR 186 186 187 -(% border="1" style="background-color:#ffffcc; color:green; width:831.222px" %) 188 -|=(% colspan="3" style="width: 828px;" %)Reset to factory default 189 -|(% style="width:181px" %)**Command Example**|(% style="width:181px" %)**Function**|(% style="width:465px" %)**Response** 190 -|(% style="width:181px" %)AT+FDR|(% style="width:181px" %)Reset to factory default|(% style="width:465px" %)((( 191 -Device reset to factory default parameters and show booting info 125 +|=(% colspan="3" %)Reset to factory default 126 +|**Command Example**|**Function**|**Response** 127 +|AT+FDR|Reset to factory default|Device reset to factory default parameters and show booting info 192 192 193 -LSN50 Device/LoRa ST Module 194 - 129 +{{{LSN50 Device/LoRa ST Module 195 195 Image Version: XX 196 - 197 197 Frequency Band: XX 198 - 199 199 DevEui= XX XX XX XX XX XX XX XX 200 - 201 201 Please set the parameters or reset Device to apply change 202 - )))134 +}}} 203 203 204 -{{info}} 205 -**Downlink Command: 0x04** 206 -{{/info}} 207 207 208 -((( 137 +Downlink Command: 0x04 138 + 209 209 Format: Command Code (0x04) followed by FE. 210 -))) 211 211 212 -((( 213 -If the downlink payload=**04FE**, Reset Parameters to Factory Default, Keys Reserve. 214 -))) 141 +If the downlink payload=04FE, Reset Parameters to Factory Default, Keys Reserve. 215 215 216 216 217 217 == 4.4 Show Firmware Version == ... ... @@ -218,42 +218,30 @@ 218 218 219 219 Feature: Show firmware version. No downlink command yet. 220 220 221 -{{info}} 222 -**AT Command: AT+VER** 223 -{{/info}} 148 +AT Command: AT+VER 224 224 225 -(% border="1" style="background-color:#ffffcc; color:green; width:586px" %) 226 -|=(% colspan="3" style="width: 583px;" %)AT+VER: Image Version and Frequency Band 227 -|(% style="width:170px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:113px" %)**Response** 228 -|(% style="width:170px" %)AT+VER=?|(% style="width:300px" %)Show Image version and Frequency Band|(% style="width:113px" %)((( 229 -1.3 EU868 150 +|=(% colspan="3" %)AT+VER: Image Version and Frequency Band 151 +|**Command Example**|**Function**|**Response** 152 +|AT+VER=?|Show Image version and Frequency Band| 230 230 154 +{{{1.3 EU868 231 231 OK 232 - )))156 +}}} 233 233 234 -{{info}} 235 -**Downlink Command: 0x26 (Valid in 006 stack)** 236 -{{/info}} 237 237 238 -((( 159 +Downlink Command: 0x26 (Valid in 006 stack) 160 + 239 239 Downlink Format: 0x26 240 -))) 241 241 242 -((( 243 243 Device will reply with firmware version info, device info. frequency band info. detail please check device user manual. Total 5 bytes Example: If device is of firmware version 1.1.0 Upload: xx ~-~- yy ~-~- zz ~-~- 110 total 5 bytes 244 -))) 245 245 246 -((( 247 -**xx: Software Type:** 248 -))) 165 +xx: Software Type: 249 249 250 250 * 0x00 01: LGT92 Version 251 251 * 0x00 02: LBT1 252 252 * 0x00 03: LSE01/LDDS75/LDDS20/LSPH01/LLMS01/LSNPK01 253 253 254 -((( 255 -**yy: Frequency Band:** 256 -))) 171 +yy: Frequency Band: 257 257 258 258 * 0x01: EU868 259 259 * 0x02: US915 ... ... @@ -266,9 +266,7 @@ 266 266 * 0x09: AS923-2 267 267 * 0xa0: AS923-3 268 268 269 -((( 270 -**zz: Subband** 271 -))) 184 +zz: Subband 272 272 273 273 firmware version: v1.1.0 ~-~-> 110 274 274 ... ... @@ -277,26 +277,19 @@ 277 277 278 278 Feature: Show All configure. No downlink command yet. 279 279 280 -{{info}} 281 -**AT Command: AT+CFG** 282 -{{/info}} 193 +AT Command: AT+CFG 283 283 284 -(% border="1" style="background-color:#ffffcc; color:green; width:599.222px" %) 285 -|=(% colspan="3" style="width: 596px;" %)AT+CFG: Print all configurations 286 -|(% style="width:160px" %)**Command Example**|(% style="width:154px" %)**Function**|(% style="width:280px" %)**Response** 287 -|(% style="width:160px" %)AT+CFG|(% style="width:154px" %)Show all configures|(% style="width:280px" %)((( 288 -AT+DEUI = XX XX XX XX XX XX XX XX 195 +|=(% colspan="3" %)AT+CFG: Print all configurations 196 +|**Command Example**|**Function**|**Response** 197 +|AT+CFG|Show all configures| 289 289 199 +{{{AT+DEUI = XX XX XX XX XX XX XX XX 290 290 AT+DADDR=XXXXXXXX 291 - 292 292 ………. 293 - 294 294 AT+RX2WTO=X 295 - 296 296 AT+CHS=868100000 297 - 298 298 OK 299 - )))205 +}}} 300 300 301 301 302 302 = 5. Keys, IDs and EUIs management = ... ... @@ -305,50 +305,40 @@ 305 305 306 306 Feature: Get or Set the Application EUI. 307 307 308 -{{info}} 309 -**AT Command: AT+APPEUI** 310 -{{/info}} 214 +AT Command: AT+APPEUI 311 311 312 -(% border="1" style="background-color:#ffffcc; color:green; width:686.222px" %) 313 -|=(% colspan="3" style="width: 683px;" %)AT+APPEUI 314 -|(% style="width:305px" %)**Command Example**|(% style="width:186px" %)**Function**|(% style="width:191px" %)**Response** 315 -|(% style="width:305px" %)AT+APPEUI=?|(% style="width:186px" %)Get the Application EUI|(% style="width:191px" %)00 b3 d5 00 00 00 00 00((( 216 +|=(% colspan="3" %)AT+APPEUI 217 +|**Command Example**|**Function**|**Response** 218 +|AT+APPEUI=?|Get the Application EUI|00 b3 d5 00 00 00 00 00((( 316 316 OK 317 317 ))) 318 -| (% style="width:305px" %)AT+APPEUI=00 b3 d5 7e f0 00 4d 34|(% style="width:186px" %)Set the Application EUI|(% style="width:191px" %)OK221 +|AT+APPEUI=00 b3 d5 7e f0 00 4d 34|Set the Application EUI|OK 319 319 320 - 321 321 == 5.2 Application Key == 322 322 323 323 Feature: Get or Set the Application Key. 324 324 325 -{{info}} 326 -**AT Command: AT+APPKEY** 327 -{{/info}} 227 +AT Command: AT+APPKEY 328 328 329 -(% border="1" style="background-color:#ffffcc; color:green; width:976.222px" %) 330 -|=(% colspan="3" style="width: 973px;" %)AT+APPKEY 331 -|(% style="width:441px" %)**Command Example**|(% style="width:180px" %)**Function**|(% style="width:350px" %)**Response** 332 -|(% style="width:441px" %)AT+APPKEY=?|(% style="width:180px" %)Get the Application Key|(% style="width:350px" %)00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35((( 229 +|=(% colspan="3" %)AT+APPKEY 230 +|**Command Example**|**Function**|**Response** 231 +|AT+APPKEY=?|Get the Application Key|00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35((( 333 333 OK 334 334 ))) 335 -| (% style="width:441px" %)AT+APPKEY=00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35|(% style="width:180px" %)Set the Application Key|(% style="width:350px" %)OK234 +|AT+APPKEY=00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35|Set the Application Key.|OK 336 336 337 337 == 5.3 Application Session Key == 338 338 339 339 Feature: Get or Set the Application Session Key. 340 340 341 -{{info}} 342 -**AT Command: AT+APPSKEY** 343 -{{/info}} 240 +AT Command: AT+APPSKEY 344 344 345 -(% border="1" style="background-color:#ffffcc; color:green; width:1040.22px" %) 346 -|=(% colspan="3" style="width: 1037px;" %)AT+APPSKEY 347 -|(% style="width:451px" %)**Command Example**|(% style="width:231px" %)**Function**|(% style="width:354px" %)**Response** 348 -|(% style="width:451px" %)AT+APPSKEY=?|(% style="width:231px" %)Get the Application Session Key|(% style="width:354px" %)00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2((( 242 +|=(% colspan="3" %)AT+APPSKEY 243 +|**Command Example**|**Function**|**Response** 244 +|AT+APPSKEY=?|Get the Application Session Key|00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2((( 349 349 OK 350 350 ))) 351 -| (% style="width:451px" %)AT+APPSKEY=00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2|(% style="width:231px" %)Set the Application Session Key|(% style="width:354px" %)(While Error in format, return AT_PARAM_ERROR)(((247 +|AT+APPSKEY=00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2|Set the Application Session Key.|(While Error in format, return AT_PARAM_ERROR)((( 352 352 OK 353 353 ))) 354 354 ... ... @@ -356,78 +356,58 @@ 356 356 357 357 Feature: Get or Set the Device Address. 358 358 359 -{{info}} 360 -**AT Command: AT+DADDR** 361 -{{/info}} 255 +AT Command: AT+DADDR 362 362 363 -(% border="1" style="background-color:#ffffcc; color:green; width:795.222px" %) 364 -|=(% colspan="3" style="width: 792px;" %)AT+DADDR 365 -|(% style="width:192px" %)**Command Example**|(% style="width:241px" %)**Function**|(% style="width:359px" %)**Response** 366 -|(% style="width:192px" %)AT+DADDR=?|(% style="width:241px" %)Get the Application Session Key.|(% style="width:359px" %)(While Error in format, return AT_PARAM_ERROR)((( 257 +|=(% colspan="3" %)AT+DADDR 258 +|**Command Example**|**Function**|**Response** 259 +|AT+DADDR=?|Get the Application Session Key.|(While Error in format, return AT_PARAM_ERROR)((( 367 367 A8 40 41 FF 368 368 369 369 OK 370 370 ))) 371 -| (% style="width:192px" %)AT+DADDR=A8 40 41 FF|(% style="width:241px" %)Set the Application Session Key.|(% style="width:359px" %)OK264 +|AT+DADDR=A8 40 41 FF|Set the Application Session Key.|OK 372 372 373 - 374 - 375 375 == 5.5 Device EUI == 376 376 377 377 Feature: Get or Set the Device EUI. 378 378 379 -{{info}} 380 -**AT Command: AT+DEUI** 381 -{{/info}} 270 +AT Command: AT+DEUI 382 382 383 -(% border="1" style="background-color:#ffffcc; color:green; width:1035.22px" %) 384 -|=(% colspan="3" style="width: 1032px;" %)AT+DEUI 385 -|(% style="width:250px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:634px" %)**Response** 386 -|(% style="width:250px" %)AT+DEUI=?|(% style="width:147px" %)Get the Device EUI.|(% style="width:634px" %)00 44 34 22 33 45 55 55((( 272 +|=(% colspan="3" %)AT+DEUI 273 +|**Command Example**|**Function**|**Response** 274 +|AT+DEUI=?|Get the Device EUI.|00 44 34 22 33 45 55 55((( 387 387 OK 388 388 ))) 389 -| (% style="width:250px" %)AT+DEUI=A8 40 41 FF FF 12 34 56|(% style="width:147px" %)Set the Device EUI.|(% style="width:634px" %)(System will write new value to Device EUI,While Error in format, return AT_PARAM_ERROR)(((277 +|AT+DEUI=A8 40 41 FF FF 12 34 56|Set the Device EUI.|(System will write new value to Device EUI,While Error in format, return AT_PARAM_ERROR)((( 390 390 OK 391 391 ))) 392 392 393 - 394 - 395 395 == 5.6 Network ID == 396 396 397 397 Feature: Get or Set the Network ID.(You can enter this command change only after successful network connection) 398 398 399 -{{info}} 400 -**AT Command: AT+NWKID** 401 -{{/info}} 285 +AT Command: AT+NWKID 402 402 403 -(% border="1" style="background-color:#ffffcc; color:green; width:448.222px" %) 404 -|=(% colspan="3" style="width: 445px;" %)AT+NWKID 405 -|(% style="width:191px" %)**Command Example**|(% style="width:153px" %)**Function**|(% style="width:101px" %)**Response** 406 -|(% style="width:191px" %)AT+NWKID=?|(% style="width:153px" %)Get the Network ID.|(% style="width:101px" %)a8 40 41 ff((( 287 +|=(% colspan="3" %)AT+NWKID 288 +|**Command Example**|**Function**|**Response** 289 +|AT+NWKID=?|Get the Network ID.|a8 40 41 ff((( 407 407 OK 408 408 ))) 409 -| (% style="width:191px" %)AT+NWKID=A8 40 41 FF|(% style="width:153px" %)Set the Network ID.|(% style="width:101px" %)OK292 +|AT+NWKID=A8 40 41 FF|Set the Network ID.|OK 410 410 411 - 412 - 413 413 == 5.7 Network Session Key == 414 414 415 415 Feature: Get or Set the Network Session Key 416 416 417 -{{info}} 418 -**AT Command: AT+NWKSKEY** 419 -{{/info}} 298 +AT Command: AT+NWKSKEY 420 420 421 -(% border="1" style="background-color:#ffffcc; color:green; width:1017.22px" %) 422 -|=(% colspan="3" style="width: 1014px;" %)AT+NWKSKEY 423 -|(% style="width:455px" %)**Command Example**|(% style="width:215px" %)**Function**|(% style="width:343px" %)**Response** 424 -|(% style="width:455px" %)AT+NWKSKEY=?|(% style="width:215px" %)Get the Network Session Key.|(% style="width:343px" %)00 4f 19 25 52 ce 97 09 d7 fa 84 71 db 51 02 92((( 300 +|=(% colspan="3" %)AT+NWKSKEY 301 +|**Command Example**|**Function**|**Response** 302 +|AT+NWKSKEY=?|Get the Network Session Key.|00 4f 19 25 52 ce 97 09 d7 fa 84 71 db 51 02 92((( 425 425 OK 426 426 ))) 427 -| (% style="width:455px" %)AT+NWKSKEY=A8 40 41 FF FF 12 34 56 00 01 02 04 05 06 06 07|(% style="width:215px" %)Set the Network Session Key.|(% style="width:343px" %)OK305 +|AT+NWKSKEY=A8 40 41 FF FF 12 34 56 00 01 02 04 05 06 06 07|Set the Network Session Key.|OK 428 428 429 - 430 - 431 431 = 6. Joining and sending date on LoRaWAN network = 432 432 433 433 == 6.1 Confirm Mode == ... ... @@ -434,18 +434,15 @@ 434 434 435 435 Feature: Get or Set the confirmation mode (0-1). 436 436 437 -{{info}} 438 -**AT Command: AT+CFM** 439 -{{/info}} 313 +AT Command: AT+CFM 440 440 441 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %) 442 -|=(% colspan="3" style="width: 707px;" %)AT+CFM 443 -|(% style="width:155px" %)**Command Example**|(% style="width:205px" %)**Function**|(% style="width:346px" %)**Response** 444 -|(% style="width:155px" %)AT+CFM=?|(% style="width:205px" %)Get the confirmation mode|(% style="width:346px" %)0((( 315 +|=(% colspan="3" %)AT+CFM 316 +|**Command Example**|**Function**|**Response** 317 +|AT+CFM=?|Get the confirmation mode|0((( 445 445 OK 446 446 ))) 447 -| (% style="width:155px" %)AT+CFM=1|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)OK448 -| (% style="width:155px" %)AT+CFM=2|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)While Error in format, return AT_PARAM_ERROR320 +|AT+CFM=1|Set the confirmation mode|OK 321 +|AT+CFM=2|Set the confirmation mode|While Error in format, return AT_PARAM_ERROR 449 449 450 450 Downlink Command: 0x05 451 451 ... ... @@ -456,132 +456,100 @@ 456 456 * Example 1: Downlink Payload: 0501 ~/~/ Set AT+CFM=1 457 457 * Example 2: Downlink Payload: 0500 ~/~/ Set AT+CFM=0 458 458 459 - 460 - 461 461 == 6.2 Confirm Status == 462 462 463 463 Feature: Get confirmation status of the last AT+SEND (0-1). 464 464 465 -{{info}} 466 -**AT Command: AT+CFS** 467 -{{/info}} 336 +AT Command: AT+CFS 468 468 469 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %) 470 -|=(% colspan="3" style="width: 531px;" %)AT+CFS 471 -|(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:178px" %)**Response** 472 -|(% style="width:156px" %)AT+CFS=?|(% style="width:193px" %)Get confirmation status|(% style="width:178px" %)0((( 338 +|=(% colspan="3" %)AT+CFS 339 +|**Command Example**|**Function**|**Response** 340 +|AT+CFS=?|Get confirmation status|0((( 473 473 OK 474 474 ))) 475 475 476 - 477 - 478 478 == 6.3 Join LoRa® Network == 479 479 480 480 Feature: Join network. 481 481 482 -{{info}} 483 -**AT Command: AT+JOIN** 484 -{{/info}} 348 +AT Command: AT+JOIN 485 485 486 -(% border="1" style="background-color:#ffffcc; color:green; width:647.222px" %) 487 -|=(% colspan="3" style="width: 644px;" %)AT+JOIN 488 -|(% style="width:163px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:334px" %)**Response** 489 -|(% style="width:163px" %)AT+JOIN ?|(% style="width:147px" %)Get imformation.|(% style="width:334px" %)AT+JOIN: Join network((( 350 +|=(% colspan="3" %)AT+JOIN 351 +|**Command Example**|**Function**|**Response** 352 +|AT+JOIN ?|Get imformation.|AT+JOIN: Join network((( 490 490 OK 491 491 492 492 While Error in format, return AT_BUSY_ERROR 493 493 ))) 494 494 495 - 496 496 == 6.4 LoRa® Network Join Mode == 497 497 498 498 Feature: Get or Set the Network Join Mode. (0: ABP, 1: OTAA). 499 499 500 -{{info}} 501 -**AT Command: AT+NJM** 502 -{{/info}} 362 +AT Command: AT+NJM 503 503 504 -(% border="1" style="background-color:#ffffcc; color:green; width:753.222px" %) 505 -|=(% colspan="3" style="width: 750px;" %)AT+NJM 506 -|(% style="width:162px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:361px" %)**Response** 507 -|(% style="width:162px" %)AT+NJM=?|(% style="width:227px" %)Get the Network Join Mode|(% style="width:361px" %)1((( 364 +|=(% colspan="3" %)AT+NJM 365 +|**Command Example**|**Function**|**Response** 366 +|AT+NJM=?|Get the Network Join Mode|1((( 508 508 OK 509 509 ))) 510 -| (% style="width:162px" %)AT+NJM=0|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)OK511 -| (% style="width:162px" %)AT+NJM=2|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)While Error in format, return AT_PARAM_ERROR369 +|AT+NJM=0|Set the Network Join Mode|OK 370 +|AT+NJM=2|Set the Network Join Mode|While Error in format, return AT_PARAM_ERROR 512 512 513 -{{info}} 514 -**Downlink Command: 0x20** 515 -{{/info}} 372 +Downlink Command: 0x20 516 516 517 517 Format: Command Code (0x20) followed by 1 bytes mode value. 518 518 519 519 If the downlink payload=2000, it means set the Network Join Mode, while type code is 20. 520 520 521 -* **Example 1:**Downlink Payload:**2000**~/~/ Set AT+NJM=O522 -* **Example 2:**Downlink Payload:**2001**~/~/ Set AT+NJM=1378 +* Example 1: Downlink Payload: 2000 ~/~/ Set AT+NJM=O 379 +* Example 2: Downlink Payload: 2001 ~/~/ Set AT+NJM=1 523 523 524 - 525 525 == 6.5 LoRa® Network Join Status == 526 526 527 527 Feature: LoRa® Network Join Status. 528 528 529 -{{info}} 530 -**AT Command: AT+NJS** 531 -{{/info}} 385 +AT Command: AT+NJS 532 532 533 -(% border="1" style="background-color:#ffffcc; color:green; width:498.222px" %) 534 -|=(% colspan="3" style="width: 495px;" %)AT+NJS 535 -|(% style="width:169px" %)**Command Example**|(% style="width:164px" %)**Function**|(% style="width:161px" %)**Response** 536 -|(% style="width:169px" %)AT+NJS=?|(% style="width:164px" %)Get the join status.|(% style="width:161px" %)0((( 387 +|=(% colspan="3" %)AT+NJS 388 +|**Command Example**|**Function**|**Response** 389 +|AT+NJS=?|Get the join status.|0((( 537 537 OK 538 538 ))) 539 539 540 - 541 541 == 6.6 Print Last Received Data in Raw Format == 542 542 543 543 Feature: Print Last Received Data in Raw Format<port:data>. 544 544 545 -{{info}} 546 -**AT Command: AT+RECV** 547 -{{/info}} 397 +AT Command: AT+RECV 548 548 549 -(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %) 550 -|=(% colspan="3" style="width: 584px;" %)AT+RECV 551 -|(% style="width:161px" %)**Command Example**|(% style="width:272px" %)**Function**|(% style="width:150px" %)**Response** 552 -|(% style="width:161px" %)AT+RECV=?|(% style="width:272px" %)print last received data in raw format.|(% style="width:150px" %)0:((( 399 +|=(% colspan="3" %)AT+RECV 400 +|**Command Example**|**Function**|**Response** 401 +|AT+RECV=?|print last received data in raw format.|0:((( 553 553 OK 554 554 ))) 555 555 556 - 557 557 == 6.7 Print Last Received Data in Binary Format == 558 558 559 559 Feature: Print Last Received Data in Binary Format<port:data>. 560 560 561 -{{info}} 562 -**AT Command: AT+RECVB** 563 -{{/info}} 409 +AT Command: AT+RECVB 564 564 565 -(% border="1" style="background-color:#ffffcc; color:green; width:793.222px" %) 566 -|=(% colspan="3" style="width: 790px;" %)AT+RECVB 567 -|(% style="width:173px" %)**Command Example**|(% style="width:497px" %)**Function**|(% style="width:120px" %)**Response** 568 -|(% style="width:173px" %)AT+RECVB=?|(% style="width:497px" %)print last received data in binary format (with hexadecimal values).|(% style="width:120px" %)2: 0010((( 411 +|=(% colspan="3" %)AT+RECVB 412 +|**Command Example**|**Function**|**Response** 413 +|AT+RECVB=?|print last received data in binary format (with hexadecimal values).|2: 0010((( 569 569 OK 570 570 ))) 571 571 572 - 573 573 == 6.8 Send Text Data == 574 574 575 575 Feature: Send Text Data<port:data>. 576 576 577 -{{info}} 578 -**AT Command: AT+SEND** 579 -{{/info}} 421 +AT Command: AT+SEND 580 580 581 -(% border="1" style="background-color:#ffffcc; color:green; width:991.222px" %) 582 -|=(% colspan="3" style="width: 988px;" %)AT+SEND 583 -|(% style="width:201px" %)**Command Example**|(% style="width:340px" %)**Function**|(% style="width:446px" %)**Response** 584 -|(% style="width:201px" %)AT+SEND=12:hello world|(% style="width:340px" %)Send text data along with the application port.|(% style="width:446px" %)OK((( 423 +|=(% colspan="3" %)AT+SEND 424 +|**Command Example**|**Function**|**Response** 425 +|AT+SEND=12:hello world|Send text data along with the application port.|OK((( 585 585 While Error in format, return 586 586 587 587 AT_BUSY_ERROR/AT_BUSY_ERROR/AT_NO_NETWORK_JOINED ... ... @@ -589,26 +589,21 @@ 589 589 590 590 ))) 591 591 592 - 593 593 == 6.9 Send Hexadecimal Data == 594 594 595 595 Feature: Send hexadecimal data along with the application port. 596 596 597 -{{info}} 598 -**AT Command: AT+SENDB** 599 -{{/info}} 437 +AT Command: AT+SENDB 600 600 601 -(% border="1" style="background-color:#ffffcc; color:green; width:1120.22px" %) 602 -|=(% colspan="3" style="width: 1117px;" %)AT+SENDB 603 -|(% style="width:257px" %)**Command Example**|(% style="width:406px" %)**Function**|(% style="width:453px" %)**Response** 604 -|(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)OK 605 -|(% style="width:257px" %)AT+SENDB=abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)While Error in format, return((( 439 +|=(% colspan="3" %)AT+SENDB 440 +|**Command Example**|**Function**|**Response** 441 +|AT+SENDB=12:abcdef0123456789|Send hexadecimal data along with the application port.|OK 442 +|AT+SENDB=abcdef0123456789|Send hexadecimal data along with the application port.|While Error in format, return((( 606 606 AT_PARAM_ERROR AT_BUSY_ERROR/AT_NO_NETWORK_JOINED 607 607 608 608 609 609 ))) 610 610 611 - 612 612 = 7. LoRaWAN network management = 613 613 614 614 == 7.1 Adaptive Data Rate == ... ... @@ -615,289 +615,231 @@ 615 615 616 616 Feature: Get or Set the Adaptive Data Rate setting. (0: off, 1: on). 617 617 618 -{{info}} 619 -**AT Command: AT+ADR** 620 -{{/info}} 621 621 622 -(% border="1" style="background-color:#ffffcc; color:green; width:683.222px" %) 623 -|=(% colspan="3" style="width: 680px;" %)AT+ADR 624 -|(% style="width:162px" %)**Command Example**|(% style="width:266px" %)**Function**|(% style="width:250px" %)**Response** 625 -|(% style="width:162px" %)AT+ADR=?|(% style="width:266px" %)Get the Adaptive Data Rate setting.|(% style="width:250px" %)1((( 455 +AT Command: AT+ADR 456 + 457 +|=(% colspan="3" %)AT+ADR 458 +|**Command Example**|**Function**|**Response** 459 +|AT+ADR=?|Get the Adaptive Data Rate setting.|1((( 626 626 OK 627 627 ))) 628 -| (% style="width:162px" %)AT+ADR=0|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:250px" %)OK629 -| (% style="width:162px" %)AT+ADR=2|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:250px" %)While Error in format, return(((462 +|AT+ADR=0|Set the Adaptive Data Rate setting.|OK 463 +|AT+ADR=2|Set the Adaptive Data Rate setting.|While Error in format, return((( 630 630 AT_PARAM_ERROR 631 631 ))) 632 632 633 -{{info}} 634 -**Downlink Command: 0x22** 635 -{{/info}} 467 +Downlink Command: 0x22 636 636 637 637 638 638 If the downlink payload=2201, it means setting the adaptive data rate to 1, while type code is 22. 639 639 640 -* **Example 1**: Downlink Payload:**2201**~/~/ Set AT+ADR=1.641 -* **Example 2**: Downlink Payload:**2200FFFF**~/~/ Set AT+ADR=0.472 +* Example 1: Downlink Payload: 2201 ~/~/ Set AT+ADR=1. 473 +* Example 2: Downlink Payload: 2200FFFF ~/~/ Set AT+ADR=0. 642 642 643 - 644 644 == 7.2 LoRa® Class == 645 645 646 646 Feature: Get or Set the Device Class(Currently only support class A, class C). 647 647 648 -{{info}} 649 -**AT Command:AT+CLASS** 650 -{{/info}} 479 +AT Command:AT+CLASS 651 651 652 -(% border="1" style="background-color:#ffffcc; color:green; width:507.222px" %) 653 -|=(% colspan="3" style="width: 504px;" %)AT+CLASS 654 -|(% style="width:163px" %)**Command Example**|(% style="width:166px" %)**Function**|(% style="width:175px" %)**Response** 655 -|(% style="width:163px" %)AT+CLASS=?|(% style="width:166px" %)Get the Device Class.|(% style="width:175px" %)A((( 481 +|=(% colspan="3" %)AT+CLASS 482 +|**Command Example**|**Function**|**Response** 483 +|AT+CLASS=?|Get the Device Class.|A((( 656 656 OK 657 657 ))) 658 -| (% style="width:163px" %)AT+CLASS=C|(% style="width:166px" %)Set the Device Class.|(% style="width:175px" %)OK(((486 +|AT+CLASS=C|Set the Device Class.|OK((( 659 659 660 660 ))) 661 661 662 - 663 663 == 7.3 Duty Cycle Setting == 664 664 665 665 Feature: Get or Set the ETSI Duty Cycle setting - 0=disable, 1=enable - Only for testing. 666 666 667 -{{info}} 668 -**AT Command:AT+DCS** 669 -{{/info}} 494 +AT Command:AT+DCS 670 670 671 -(% border="1" style="background-color:#ffffcc; color:green; width:515.222px" %) 672 -|=(% colspan="3" style="width: 512px;" %)AT+DCS 673 -|(% style="width:165px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:107px" %)**Response** 674 -|(% style="width:165px" %)AT+DCS=?|(% style="width:239px" %)Get the ETSI Duty Cycle setting.|(% style="width:107px" %)1((( 496 +|=(% colspan="3" %)AT+DCS 497 +|**Command Example**|**Function**|**Response** 498 +|AT+DCS=?|Get the ETSI Duty Cycle setting.|1((( 675 675 OK 676 676 ))) 677 -| (% style="width:165px" %)AT+DCS=1|(% style="width:239px" %)Set the ETSI Duty Cycle setting.|(% style="width:107px" %)OK(((501 +|AT+DCS=1|Set the ETSI Duty Cycle setting.|OK((( 678 678 679 679 ))) 680 680 681 - 682 682 == 7.4 Data Rate == 683 683 684 684 Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) . Note: while set Data Rate, please use set Adptive Data Rate, ADR=0 first. otherwise device will response to server's ADR command and change the DR to the setting from server 685 685 686 -{{info}} 687 -**AT Command: AT+DR** 688 -{{/info}} 509 +AT Command: AT+DR 689 689 690 -(% border="1" style="background-color:#ffffcc; color:green; width:466.222px" %) 691 -|=(% colspan="3" style="width: 463px;" %)AT+DR 692 -|(% style="width:156px" %)**Command Example**|(% style="width:167px" %)**Function**|(% style="width:140px" %)**Response** 693 -|(% style="width:156px" %)AT+DR=?|(% style="width:167px" %)Get the Data Rate.|(% style="width:140px" %)5((( 511 +|=(% colspan="3" %)AT+DR 512 +|**Command Example**|**Function**|**Response** 513 +|AT+DR=?|Get the Data Rate.|5((( 694 694 OK 695 695 ))) 696 -| (% style="width:156px" %)AT+DR=2|(% style="width:167px" %)Set the Data Rate.|(% style="width:140px" %)OK(((516 +|AT+DR=2|Set the Data Rate.|OK((( 697 697 698 698 ))) 699 699 700 -{{info}} 701 -**Downlink Command: 0x2200aaFF** 702 -{{/info}} 520 +Downlink Command: 0x2200aaFF 703 703 704 704 705 705 If the downlink payload=220001FF, it means setting the data rate to 1, while type code is 22 00 aa FF. 706 706 707 -* **Example 1**: Downlink Payload:**220001FF**~/~/ Set AT+DR=1.708 -* **Example 2**: Downlink Payload:**220000FF**~/~/ Set AT+DR=0.525 +* Example 1: Downlink Payload: 220001FF ~/~/ Set AT+DR=1. 526 +* Example 2: Downlink Payload: 220000FF ~/~/ Set AT+DR=0. 709 709 710 - 711 711 == 7.5 Frame Counter Downlink == 712 712 713 713 Feature: Get or Set the Frame Counter Downlink. 714 714 715 -{{info}} 716 -**AT Command:AT+FCD** 717 -{{/info}} 532 +AT Command:AT+FCD 718 718 719 -(% border="1" style="background-color:#ffffcc; color:green; width:693.222px" %) 720 -|=(% colspan="3" style="width: 690px;" %)AT+FCD 721 -|(% style="width:162px" %)**Command Example**|(% style="width:258px" %)**Function**|(% style="width:269px" %)**Response** 722 -|(% style="width:162px" %)AT+FCD=?|(% style="width:258px" %)Get the Frame Counter Downlink.|(% style="width:269px" %)0((( 534 +|=(% colspan="3" %)AT+FCD 535 +|**Command Example**|**Function**|**Response** 536 +|AT+FCD=?|Get the Frame Counter Downlink.|0((( 723 723 OK 724 724 ))) 725 -| (% style="width:162px" %)AT+FCD=10|(% style="width:258px" %)Set the Frame Counter Downlink.|(% style="width:269px" %)(System will write new value to FCD)(((539 +|AT+FCD=10|Set the Frame Counter Downlink.|(System will write new value to FCD)((( 726 726 OK 727 727 728 728 729 729 ))) 730 730 731 - 732 732 == 7.6 Frame Counter Uplink == 733 733 734 734 Feature: Get or Set the Frame Counter Uplink. 735 735 736 -{{info}} 737 -**AT Command:AT+FCU** 738 -{{/info}} 549 +AT Command:AT+FCU 739 739 740 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %) 741 -|=(% colspan="3" style="width: 531px;" %)AT+FCU 742 -|(% style="width:177px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:113px" %)**Response** 743 -|(% style="width:177px" %)AT+FCU=?|(% style="width:239px" %)Get the Frame Counter Uplink.|(% style="width:113px" %)0((( 551 +|=(% colspan="3" %)AT+FCU 552 +|**Command Example**|**Function**|**Response** 553 +|AT+FCU=?|Get the Frame Counter Uplink.|0((( 744 744 OK 745 745 ))) 746 -| (% style="width:177px" %)AT+FCU=10|(% style="width:239px" %)Set the Frame Counter Uplink.|(% style="width:113px" %)OK(((556 +|AT+FCU=10|Set the Frame Counter Uplink.|OK((( 747 747 748 748 ))) 749 749 750 - 751 751 == 7.7 Join Accept Delay1 == 752 752 753 753 Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 1 in ms. 754 754 755 -{{info}} 756 -**AT Command:AT+JN1DL** 757 -{{/info}} 564 +AT Command:AT+JN1DL 758 758 759 -(% border="1" style="background-color:#ffffcc; color:green; width:537.222px" %) 760 -|=(% colspan="3" style="width: 534px;" %)AT+JN1DL 761 -|(% style="width:164px" %)**Command Example**|(% style="width:229px" %)**Function**|(% style="width:140px" %)**Response** 762 -|(% style="width:164px" %)AT+JN1DL=?|(% style="width:229px" %)Get the Join Accept Delay.|(% style="width:140px" %)5000((( 566 +|=(% colspan="3" %)AT+JN1DL 567 +|**Command Example**|**Function**|**Response** 568 +|AT+JN1DL=?|Get the Join Accept Delay.|5000((( 763 763 OK 764 764 ))) 765 -| (% style="width:164px" %)AT+JN1DL=10000|(% style="width:229px" %)Set the Join Accept Delay.|(% style="width:140px" %)OK(((571 +|AT+JN1DL=10000|Set the Join Accept Delay.|OK((( 766 766 767 767 ))) 768 768 769 - 770 770 == 7.8 Join Accept Delay2 == 771 771 772 772 Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 2 in ms. 773 773 774 -{{info}} 775 -**AT Command:AT+JN2DL** 776 -{{/info}} 579 +AT Command:AT+JN2DL 777 777 778 -(% border="1" style="background-color:#ffffcc; color:green; width:538.222px" %) 779 -|=(% colspan="3" style="width: 535px;" %)AT+JN2DL 780 -|(% style="width:160px" %)**Command Example**|(% style="width:228px" %)**Function**|(% style="width:146px" %)**Response** 781 -|(% style="width:160px" %)AT+JN2DL=?|(% style="width:228px" %)Get the Join Accept Delay.|(% style="width:146px" %)6000((( 581 +|=(% colspan="3" %)AT+JN2DL 582 +|**Command Example**|**Function**|**Response** 583 +|AT+JN2DL=?|Get the Join Accept Delay.|6000((( 782 782 OK 783 783 ))) 784 -| (% style="width:160px" %)AT+JN2DL=20000|(% style="width:228px" %)Set the Join Accept Delay.|(% style="width:146px" %)OK(((586 +|AT+JN2DL=20000|Set the Join Accept Delay.|OK((( 785 785 786 786 ))) 787 787 788 - 789 789 == 7.9 Public Network Mode == 790 790 791 791 Feature: Get or Set the public network mode. (0: off, 1: on) 792 792 793 -{{info}} 794 -**AT Command:AT+PNM** 795 -{{/info}} 594 +AT Command:AT+PNM 796 796 797 -(% border="1" style="background-color:#ffffcc; color:green; width:667.222px" %) 798 -|=(% colspan="3" style="width: 664px;" %)AT+PNM 799 -|(% style="width:166px" %)**Command Example**|(% style="width:225px" %)**Function**|(% style="width:272px" %)**Response** 800 -|(% style="width:166px" %)AT+PNM=?|(% style="width:225px" %)Get the public network mode.|(% style="width:272px" %)1((( 596 +|=(% colspan="3" %)AT+PNM 597 +|**Command Example**|**Function**|**Response** 598 +|AT+PNM=?|Get the public network mode.|1((( 801 801 OK 802 802 ))) 803 -| (% style="width:166px" %)AT+PNM=1|(% style="width:225px" %)Set the public network mode.|(% style="width:272px" %)(System will write new value to PNM)(((601 +|AT+PNM=1|Set the public network mode.|(System will write new value to PNM)((( 804 804 OK 805 805 806 806 807 807 ))) 808 808 809 - 810 810 == 7.10 Receive Delay1 == 811 811 812 812 Feature: Get or Set the delay between the end of the Tx and the Rx Window 1 in ms 813 813 814 -{{info}} 815 -**AT Command:AT+RX1DL** 816 -{{/info}} 611 +AT Command:AT+RX1DL 817 817 818 -(% border="1" style="background-color:#ffffcc; color:green; width:408.222px" %) 819 -|=(% colspan="3" style="width: 405px;" %)AT+RX1DL 820 -|(% style="width:155px" %)**Command Example**|(% style="width:128px" %)**Function**|(% style="width:122px" %)**Response** 821 -|(% style="width:155px" %)AT+RX1DL=?|(% style="width:128px" %)Get the delay.|(% style="width:122px" %)1000((( 613 +|=(% colspan="3" %)AT+RX1DL 614 +|**Command Example**|**Function**|**Response** 615 +|AT+RX1DL=?|Get the delay.|1000((( 822 822 OK 823 823 ))) 824 -| (% style="width:155px" %)AT+RX1DL=1500|(% style="width:128px" %)Set the delay.|(% style="width:122px" %)OK(((618 +|AT+RX1DL=1500|Set the delay.|OK((( 825 825 826 826 ))) 827 827 622 +== 7.11Receive Delay2 == 828 828 829 -== 7.11 Receive Delay2 == 830 - 831 831 Feature: Get or Set the delay between the end of the Tx and the Rx Window 2 in ms 832 832 833 -{{info}} 834 -**AT Command:AT+RX2DL** 835 -{{/info}} 626 +AT Command:AT+RX2DL 836 836 837 -(% border="1" style="background-color:#ffffcc; color:green; width:481.222px" %) 838 -|=(% colspan="3" style="width: 478px;" %)AT+RX2DL 839 -|(% style="width:175px" %)**Command Example**|(% style="width:152px" %)**Function**|(% style="width:150px" %)**Response** 840 -|(% style="width:175px" %)AT+RX2DL=?|(% style="width:152px" %)Get the delay.|(% style="width:150px" %)2000((( 628 +|=(% colspan="3" %)AT+RX2DL 629 +|**Command Example**|**Function**|**Response** 630 +|AT+RX2DL=?|Get the delay.|2000((( 841 841 OK 842 842 ))) 843 -| (% style="width:175px" %)AT+RX2DL=2500|(% style="width:152px" %)Set the delay.|(% style="width:150px" %)OK(((633 +|AT+RX2DL=2500|Set the delay.|OK((( 844 844 845 845 ))) 846 846 847 - 848 848 == 7.12 Rx2 Window Data Rate == 849 849 850 850 Feature: Get or Set the Rx2 window data rate (0-7 corresponding to DR_X) 851 851 852 -{{info}} 853 -**AT Command:AT+RX2DR** 854 -{{/info}} 641 +AT Command:AT+RX2DR 855 855 856 -(% border="1" style="background-color:#ffffcc; color:green; width:525.222px" %) 857 -|=(% colspan="3" style="width: 522px;" %)AT+RX2DR 858 -|(% style="width:160px" %)**Command Example**|(% style="width:232px" %)**Function**|(% style="width:130px" %)**Response** 859 -|(% style="width:160px" %)AT+RX2DR=?|(% style="width:232px" %)Get the Rx2 window data rate.|(% style="width:130px" %)2((( 643 +|=(% colspan="3" %)AT+RX2DR 644 +|**Command Example**|**Function**|**Response** 645 +|AT+RX2DR=?|Get the Rx2 window data rate.|2((( 860 860 OK 861 861 ))) 862 -| (% style="width:160px" %)AT+RX2DR=6|(% style="width:232px" %)Set the Rx2 window data rate.|(% style="width:130px" %)OK(((648 +|AT+RX2DR=6|Set the Rx2 window data rate.|OK((( 863 863 864 864 ))) 865 865 866 - 867 867 == 7.13 Rx2 Window Frequency == 868 868 869 869 Feature: Get or Set the Rx2 window frequency 870 870 871 -{{info}} 872 -**AT Command:AT+RX2FQ** 873 -{{/info}} 656 +AT Command:AT+RX2FQ 874 874 875 -(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %) 876 -|=(% colspan="3" style="width: 584px;" %)AT+RX2FQ 877 -|(% style="width:183px" %)**Command Example**|(% style="width:240px" %)**Function**|(% style="width:160px" %)**Response** 878 -|(% style="width:183px" %)AT+RX2FQ=?|(% style="width:240px" %)Get the Rx2 window frequency.|(% style="width:160px" %)434665000((( 658 +|=(% colspan="3" %)AT+RX2FQ 659 +|**Command Example**|**Function**|**Response** 660 +|AT+RX2FQ=?|Get the Rx2 window frequency.|434665000((( 879 879 OK 880 880 ))) 881 -| (% style="width:183px" %)AT+RX2FQ=434665000|(% style="width:240px" %)Set the Rx2 window frequency.|(% style="width:160px" %)OK(((663 +|AT+RX2FQ=434665000|Set the Rx2 window frequency.|OK((( 882 882 883 883 ))) 884 884 885 - 886 886 == 7.14 Transmit Power == 887 887 888 888 Feature: Get or Set the Transmit Power(0-5, MAX:0, MIN:5, according to LoRaWAN Spec, or 40=10dB, 41 = 11dB, …, 50 = 20dB which is out of LoRaWAN spec. ) 889 889 890 -{{info}} 891 -**AT Command:AT+TXP** 892 -{{/info}} 671 +AT Command:AT+TXP 893 893 894 -(% border="1" style="background-color:#ffffcc; color:green; width:465.222px" %) 895 -|=(% colspan="3" style="width: 462px;" %)AT+TXP 896 -|(% style="width:161px" %)**Command Example**|(% style="width:189px" %)**Function**|(% style="width:112px" %)**Response** 897 -|(% style="width:161px" %)AT+TXP=?|(% style="width:189px" %)Get the Transmit Power.|(% style="width:112px" %)0((( 673 +|=(% colspan="3" %)AT+TXP 674 +|**Command Example**|**Function**|**Response** 675 +|AT+TXP=?|Get the Transmit Power.|0((( 898 898 OK 899 899 ))) 900 -| (% style="width:161px" %)AT+TXP=1|(% style="width:189px" %)Set the Transmit Power.|(% style="width:112px" %)OK(((678 +|AT+TXP=1|Set the Transmit Power.|OK((( 901 901 902 902 ))) 903 903 ... ... @@ -905,190 +905,146 @@ 905 905 906 906 If the downlink payload=22000100, it means setting the TXP to 0. 907 907 908 -* **Example 1**: Downlink Payload:**22000102**~/~/ Set AT+TXP=2.909 -* **Example 2**: Downlink Payload:**220000FF**~/~/ Set AT+TXP=0.686 +* Example 1: Downlink Payload: 22000102 ~/~/ Set AT+TXP=2. 687 +* Example 2: Downlink Payload: 220000FF ~/~/ Set AT+TXP=0. 910 910 911 - 912 912 == 7.15 RSSI of the Last Received Packet == 913 913 914 914 Feature: Get or Set the Rx2 window frequency 915 915 916 -{{info}} 917 -**AT Command:AT+RSSI** 918 -{{/info}} 693 +AT Command:AT+RSSI 919 919 920 -(% border="1" style="background-color:#ffffcc; color:green; width:557.222px" %) 921 -|=(% colspan="3" style="width: 554px;" %)AT+RSSI 922 -|(% style="width:164px" %)**Command Example**|(% style="width:289px" %)**Function**|(% style="width:100px" %)**Response** 923 -|(% style="width:164px" %)AT+RSSI=?|(% style="width:289px" %)Get the RSSI of the last received packet.|(% style="width:100px" %)0((( 695 +|=(% colspan="3" %)AT+RSSI 696 +|**Command Example**|**Function**|**Response** 697 +|AT+RSSI=?|Get the RSSI of the last received packet.|0((( 924 924 OK 925 925 ))) 926 926 927 - 928 928 == 7.16 SNR of the Last Received Packet == 929 929 930 930 Feature: Get the SNR of the last received packet 931 931 932 -{{info}} 933 -**AT Command:AT+SNR** 934 -{{/info}} 705 +AT Command:AT+SNR 935 935 936 -(% border="1" style="background-color:#ffffcc; color:green; width:571.222px" %) 937 -|=(% colspan="3" style="width: 568px;" %)AT+SNR 938 -|(% style="width:164px" %)**Command Example**|(% style="width:290px" %)**Function**|(% style="width:113px" %)**Response** 939 -|(% style="width:164px" %)AT+SNR=?|(% style="width:290px" %)Get the RSSI of the last received packet.|(% style="width:113px" %)0((( 707 +|=(% colspan="3" %)AT+SNR 708 +|**Command Example**|**Function**|**Response** 709 +|AT+SNR=?|Get the RSSI of the last received packet.|0((( 940 940 OK 941 941 ))) 942 942 943 - 944 944 == 7.17 Application Port == 945 945 946 946 Feature: Get or set the application port. 947 947 948 -{{info}} 949 -**AT Command: AT+PORT** 950 -{{/info}} 717 +AT Command: AT+PORT 951 951 952 -(% border="1" style="background-color:#ffffcc; color:green; width:500.222px" %) 953 -|=(% colspan="3" style="width: 497px;" %)AT+PORT 954 -|(% style="width:157px" %)**Command Example**|(% style="width:204px" %)**Function**|(% style="width:135px" %)**Response** 955 -|(% style="width:157px" %)AT+PORT=?|(% style="width:204px" %)Get the application port|(% style="width:135px" %)21((( 719 +|=(% colspan="3" %)AT+PORT 720 +|**Command Example**|**Function**|**Response** 721 +|AT+PORT=?|Get the application port|21((( 956 956 OK 957 957 ))) 958 -| (% style="width:157px" %)AT+PORT=21|(% style="width:204px" %)Set the application port|(% style="width:135px" %)OK724 +|AT+PORT=21|Set the application port|OK 959 959 960 -{{info}} 961 -**Downlink Command: 0x23** 962 -{{/info}} 726 +Downlink Command: 0x23 963 963 964 964 Format: Command Code (0x23) followed by 1 bytes port value. 965 965 966 966 If the downlink payload=2301, it means set the application port to 1, while type code is 23. 967 967 968 -* **Example 1**: Downlink Payload:**2301**~/~/ set the application port to 1969 -* **Example 2**: Downlink Payload:**2305**~/~/ set the application port to 5732 +* Example 1: Downlink Payload: 2301 ~/~/ set the application port to 1 733 +* Example 2: Downlink Payload: 2305 ~/~/ set the application port to 5 970 970 971 - 972 972 == 7.18 Single Channel Mode == 973 973 974 974 Feature:Get or Set Frequency (Unit: Hz) for Single Channel Mode. 975 975 976 -{{info}} 977 -**AT Command: AT+CHS** 978 -{{/info}} 739 +AT Command: AT+CHS 979 979 980 -(% border="1" style="background-color:#ffffcc; color:green; width:603.222px" %) 981 -|=(% colspan="3" style="width: 600px;" %)AT+CHS 982 -|(% style="width:182px" %)**Command Example**|(% style="width:295px" %)**Function**|(% style="width:122px" %)**Response** 983 -|(% style="width:182px" %)AT+CHS=?|(% style="width:295px" %)Get Frequency for Single Channel Mode|(% style="width:122px" %)0((( 741 +|=(% colspan="3" %)AT+CHS 742 +|**Command Example**|**Function**|**Response** 743 +|AT+CHS=?|Get Frequency for Single Channel Mode|0((( 984 984 OK 985 985 ))) 986 -| (% style="width:182px" %)AT+CHS=868100000|(% style="width:295px" %)Set Frequency for Single Channel Mode|(% style="width:122px" %)OK746 +|AT+CHS=868100000|Set Frequency for Single Channel Mode|OK 987 987 988 - 989 989 == 7.19 Eight Channel Mode == 990 990 991 991 Feature: Get or Set eight channels mode,Only for US915,AU915,CN470. 992 992 993 -{{info}} 994 -**AT Command: AT+CHE** 995 -{{/info}} 752 +AT Command: AT+CHE 996 996 997 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %) 998 -|=(% colspan="3" style="width: 707px;" %)AT+CHE 999 -|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response** 1000 -|(% style="width:160px" %)AT+CHE=?|(% style="width:198px" %)Get eight channels mode|(% style="width:349px" %)1((( 754 +|=(% colspan="3" %)AT+CHE 755 +|**Command Example**|**Function**|**Response** 756 +|AT+CHE=?|Get eight channels mode|1((( 1001 1001 902.3 902.5 902.7 902.9 903.1 903.3 903.5 903.7 1002 1002 1003 1003 OK 1004 1004 ))) 1005 -| (% style="width:160px" %)AT+CHE=1|(% style="width:198px" %)Set eight channels mode|(% style="width:349px" %)OK761 +|AT+CHE=1|Set eight channels mode|OK 1006 1006 1007 -{{info}} 1008 -**Downlink Command: 0x24** 1009 -{{/info}} 763 +Downlink Command: 0x24 1010 1010 1011 1011 Format: Command Code (0x24) followed by 1 bytes channel value. 1012 1012 1013 1013 If the downlink payload=2401, it means set channel mode to 1, while type code is 24. 1014 1014 1015 -* **Example 1**: Downlink Payload: 2401 ~/~/ set channel mode to 11016 -* **Example 2**: Downlink Payload: 2405 ~/~/ set channel mode to 5769 +* Example 1: Downlink Payload: 2401 ~/~/ set channel mode to 1 770 +* Example 2: Downlink Payload: 2405 ~/~/ set channel mode to 5 1017 1017 1018 - 1019 1019 == 7.20 Get or Set RXwindows1 timeout == 1020 1020 1021 1021 Feature:Get or Set the number of symbols to detect and timeout from RXwindow1(0 to 255). 1022 1022 1023 -{{info}} 1024 -**AT Command: AT+RX1WTO** 1025 -{{/info}} 776 +AT Command: AT+RX1WTO 1026 1026 1027 -(% border="1" style="background-color:#ffffcc; color:green; width:460.222px" %) 1028 -|=(% colspan="3" style="width: 457px;" %)AT+ RX1WTO 1029 -|(% style="width:163px" %)**Command Example**|(% style="width:201px" %)**Function**|(% style="width:93px" %)**Response** 1030 -|(% style="width:163px" %)AT+RX1WTO=?|(% style="width:201px" %)Get RXwindows1 timeout|(% style="width:93px" %)14((( 778 +|=(% colspan="3" %)AT+ RX1WTO 779 +|**Command Example**|**Function**|**Response** 780 +|AT+RX1WTO=?|Get RXwindows1 timeout|14((( 1031 1031 OK 1032 1032 ))) 1033 -| (% style="width:163px" %)AT+RX1WTO=60|(% style="width:201px" %)Set RXwindows1 timeout|(% style="width:93px" %)OK783 +|AT+RX1WTO=60|Set RXwindows1 timeout|OK 1034 1034 1035 -((( 1036 -**AT+RX1TWO** is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph. 1037 -))) 785 +AT+RX1TWO is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph. 1038 1038 1039 -[[image:image -20220526162535-1.png]]787 +[[~[~[image:https://wiki.dragino.com/images/thumb/5/51/RX1WTO.JPG/600px-RX1WTO.JPG~|~|alt="RX1WTO.JPG" height="239" width="600"~]~]>>url:https://wiki.dragino.com/index.php/File:RX1WTO.JPG]] 1040 1040 1041 -((( 1042 1042 Increasing thisvalue is equal to extending the time that the receiving window is opened, butthe corresponding power consumption will also increase. Properly increasingthis value can increase the success rate of the downlink. 1043 1043 1044 - 1045 -))) 1046 - 1047 1047 == 7.21 Get or Set RXwindows2 timeout == 1048 1048 1049 1049 Feature:Get or Set the number of symbols to detect and timeout from RXwindow2(0 to 255). 1050 1050 1051 -{{info}} 1052 -**AT Command: AT+RX2WTO** 1053 -{{/info}} 795 +AT Command: AT+RX2WTO 1054 1054 1055 -(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %) 1056 -|=(% colspan="3" style="width: 494px;" %)AT+ RX2WTO 1057 -|(% style="width:190px" %)**Command Example**|(% style="width:199px" %)**Function**|(% style="width:104px" %)**Response** 1058 -|(% style="width:190px" %)AT+RX2WTO=?|(% style="width:199px" %)Get RXwindows2 timeout|(% style="width:104px" %)7((( 797 +|=(% colspan="3" %)AT+ RX2WTO 798 +|**Command Example**|**Function**|**Response** 799 +|AT+RX2WTO=?|Get RXwindows2 timeout|7((( 1059 1059 OK 1060 1060 ))) 1061 -| (% style="width:190px" %)AT+RX2WTO=20|(% style="width:199px" %)Set RXwindows2 timeout|(% style="width:104px" %)OK802 +|AT+RX2WTO=20|Set RXwindows2 timeout|OK 1062 1062 1063 - 1064 1064 == 7.22 Setting up uplinkdwelltime (as923, au915) == 1065 1065 1066 1066 Feature: Get or Set uplinkdwelltime 1067 1067 1068 -{{info}} 1069 -**AT Command: AT+DWELLT** 1070 -{{/info}} 808 +AT Command: AT+DWELLT 1071 1071 1072 -(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %) 1073 -|=(% colspan="3" style="width: 494px;" %)AT+DWELLT 1074 -|(% style="width:183px" %)**Command Example**|(% style="width:179px" %)**Function**|(% style="width:131px" %)**Response** 1075 -|(% style="width:183px" %)AT+DWELLT=?|(% style="width:179px" %)Get uplinkdwelltime|(% style="width:131px" %)1((( 810 +|=(% colspan="3" %)AT+DWELLT 811 +|**Command Example**|**Function**|**Response** 812 +|AT+DWELLT=?|Get uplinkdwelltime|1((( 1076 1076 OK 1077 1077 ))) 1078 -| (% style="width:183px" %)AT+DWELLT=0|(% style="width:179px" %)Set uplinkdwelltime|(% style="width:131px" %)OK815 +|AT+DWELLT=0|Set uplinkdwelltime|OK 1079 1079 1080 -{{info}} 1081 -**Downlink Command: 0x25** 1082 -{{/info}} 817 +Downlink Command: 0x25 1083 1083 1084 1084 Format: Command Code (0x25) followed by 1 bytes state value. 1085 1085 1086 1086 If the downlink payload=2501, it means set uplinkdwelltime to 1, while type code is 25. 1087 1087 1088 -* **Example 1**: Downlink Payload:**2501**~/~/ set uplinkdwelltime to 11089 -* **Example 2**: Downlink Payload:**2500**~/~/ set uplinkdwelltime to 0823 +* Example 1: Downlink Payload: 2501 ~/~/ set uplinkdwelltime to 1 824 +* Example 2: Downlink Payload: 2500 ~/~/ set uplinkdwelltime to 0 1090 1090 1091 - 1092 1092 == 7.23 Set Packet Receiving Response Level == 1093 1093 1094 1094 Feature: Get or Set packet receiving response level. This feature is used to set compatible with different LoRaWAN servers. If RPL doesn;t match , user will see strange message in the server portal. ... ... @@ -1095,11 +1095,11 @@ 1095 1095 1096 1096 RPL value: 1097 1097 1098 -* **AT+RPL=0:**Device won't immediately reply any downlink commands from platform.1099 -* **AT+RPL=1:**Device will immediately reply message to Unconfirmed Data Down. Payload is 0x00.1100 -* **AT+RPL=2:**Device will immediately reply message to Confirmed Data Down. Payload is 0x00 and requied response header for this command.1101 -* **AT+RPL=3:**Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command.1102 -* **AT+RPL=4:**Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands.832 +* AT+RPL=0: Device won't immediately reply any downlink commands from platform. 833 +* AT+RPL=1: Device will immediately reply message to Unconfirmed Data Down. Payload is 0x00. 834 +* AT+RPL=2: Device will immediately reply message to Confirmed Data Down. Payload is 0x00 and requied response header for this command. 835 +* AT+RPL=3: Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command. 836 +* AT+RPL=4: Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands. 1103 1103 1104 1104 Case Analyes: 1105 1105 ... ... @@ -1107,46 +1107,37 @@ 1107 1107 * For Class C devices used in ChirpStack, need to set AT+RPL=4 because Chirpstack require immedietely reply message to MAC Command. 1108 1108 * For Class C devices used in TTI, need to set AT+RPL=4 because TTI require immediately reply message to Confirmed Data Down & MAC Command. 1109 1109 1110 -{{info}} 1111 -**AT Command: AT+RPL** 1112 -{{/info}} 844 +AT Command: AT+RPL 1113 1113 1114 -(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %) 1115 -|=(% colspan="3" style="width: 533px;" %)AT+RPL 1116 -|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response** 1117 -|(% style="width:160px" %)AT+RPL=?|(% style="width:263px" %)Get packet receiving response level|(% style="width:109px" %)1((( 846 +|=(% colspan="3" %)AT+RPL 847 +|**Command Example**|**Function**|**Response** 848 +|AT+RPL=?|Get packet receiving response level|1((( 1118 1118 OK 1119 1119 ))) 1120 -| (% style="width:160px" %)AT+RPL=0|(% style="width:263px" %)Set packet receiving response level|(% style="width:109px" %)OK851 +|AT+RPL=0|Set packet receiving response level|OK 1121 1121 1122 -{{info}} 1123 -**Downlink Command: 0x21** 1124 -{{/info}} 853 +Downlink Command: 0x21 1125 1125 1126 1126 Format: Command Code (0x21) followed by 1 bytes level value. 1127 1127 1128 1128 If the downlink payload=2101, it means set packet receiving response level to 1, while type code is 21. 1129 1129 1130 -* **Example 1**: Downlink Payload:**2101**~/~/ set packet receiving response level to 11131 -* **Example 2**: Downlink Payload:**2102**~/~/ set packet receiving response level to 2859 +* Example 1: Downlink Payload: 2101 ~/~/ set packet receiving response level to 1 860 +* Example 2: Downlink Payload: 2102 ~/~/ set packet receiving response level to 2 1132 1132 1133 - 1134 1134 = 8. AT Commands Combination = 1135 1135 1136 1136 == 8.1 Set a fix RX2DR for downlink window == 1137 1137 1138 -* **AT+ADR=0**~-~-> Disable ADR first1139 -* **AT+RX2DR=xxxx**~-~-> Set xxxx to your wanted DataRate866 +* AT+ADR=0 ~-~-> Disable ADR first 867 +* AT+RX2DR=xxxx ~-~-> Set xxxx to your wanted DataRate 1140 1140 1141 - 1142 1142 == 8.2 Use Downlink Command to set a fix uplink DR == 1143 1143 1144 -{{info}} 1145 -**Downlink Command: 0x22000500** 1146 -{{/info}} 871 +Downlink Command: 0x22000500 1147 1147 1148 1148 Same as: 1149 1149 1150 -* AT+ADR=0 ||anchor="H7.1AdaptiveDataRate"]]1151 -* AT+DR=5 ||anchor="H7.4DataRate"]]1152 -* AT+TXP=0 ||anchor="H7.14TransmitPower"]]875 +* AT+ADR=0 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Adaptive_Data_Rate]] 876 +* AT+DR=5 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Data_Rate]] 877 +* AT+TXP=0 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Transmit_Power]]
- image-20220511120050-1.png
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -XWiki.Xiaoling - Size
-
... ... @@ -1,1 +1,0 @@ 1 -136.3 KB - Content
- image-20220526162535-1.png
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -XWiki.Xiaoling - Size
-
... ... @@ -1,1 +1,0 @@ 1 -149.4 KB - Content