Changes for page End Device AT Commands and Downlink Command
Last modified by kai on 2024/09/06 10:00
Summary
-
Page properties (1 modified, 0 added, 0 removed)
-
Attachments (0 modified, 0 added, 2 removed)
Details
- Page properties
-
- Content
-
... ... @@ -1,9 +1,8 @@ 1 - **Contents：**1 +Contens 2 2 3 3 {{toc/}} 4 4 5 5 6 - 7 7 = 1. Introduction = 8 8 9 9 Dragino LoRaWAN End Node support two types of AT Commands and Downlink Commands: ... ... @@ -11,93 +11,34 @@ 11 11 * **Common Commands:** They should be available for each sensor, such as: change uplink interval, reset device. 12 12 * **Sensor Related Commands:** Only for special sensor, such as control relay, poll RS485 device. 13 13 14 -((( 15 15 **This page shows the common commands since Dragino LoRaWAN stack DR-LWS-005. Make sure the end node support stack higher than DR-LWS-005 before checking this page.** 16 16 17 -))) 18 18 19 19 = 2. How to use AT Commands or Downlink command = 20 20 21 21 * For AT Command , See Devices User Manual for Device. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]] 22 22 * For LoRaWAN Downlink: The gateway transfer downlink command in HEX format. This page shows the HEX format downlink code for each command. but some servers use base64 as downlink code. Below are reference for how to use downlink command: 23 -** Use HEX format to send a downlink: [[TTN v3>>Notes 24 -** Use Base64 format to send a downlink: [[Chirpstack>>Notes 25 -** See use note for more serves [[Servers Note>>doc :Main.WebHome]](IoT LoRaWANServer)20 +** Use HEX format to send a downlink: [[TTN v3>>url:https://wiki.dragino.com/index.php/Notes_for_TTN#Send_Downlink_message]] 21 +** Use Base64 format to send a downlink: [[Chirpstack>>url:https://wiki.dragino.com/index.php/Notes_for_ChirpStack#Downlink]]. 22 +** See use note for more serves [[Servers Note>>url:https://wiki.dragino.com/index.php/Main_Page#Use_Note_for_Server]] 26 26 27 27 = 3. Support End Node and firmware version = 28 28 29 -(% border="1" style="background-color:#ffffcc; color:green; width:966px" %) 30 -|=(% colspan="3" style="width: 963px;" %)((( 31 -Dragino STM32 base hardware Firmware / LoRaWAN stack list 32 -))) 33 -|(% style="width:187px" %)((( 34 -**Model** 35 -)))|(% style="width:330px" %)((( 36 -**Description** 37 -)))|(% style="width:445px" %)((( 38 -**Firmware Version <~-~-> Stack Version** 39 -))) 40 -|(% style="width:187px" %)((( 41 -[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]], 42 -)))|(% style="width:330px" %)((( 43 -Open Source Generic LoRaWAN Sensor Node 44 -)))|(% style="width:445px" %)((( 45 -((( 46 -LSN50 v1.6.0 <~-~-> DR-LWS-003; 47 -))) 48 - 49 -((( 50 -((( 26 +(% style="background-color:#ffffcc; color:green; width:995.222px" %) 27 +|=(% colspan="3" style="width: 992px;" %)Dragino STM32 base hardware Firmware / LoRaWAN stack list 28 +|(% style="width:187px" %)**Model**|(% style="width:349px" %)**Description**|(% style="width:453px" %)**Firmware Version <~-~-> Stack Version** 29 +|(% style="width:187px" %)[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],|(% style="width:349px" %)Open Source Generic LoRaWAN Sensor Node|(% style="width:453px" %)LSN50 v1.6.0 <~-~-> DR-LWS-003;((( 51 51 LSN50 v1.7.0 <~-~-> DR-LWS-005; ~-~-> Support since this version 52 52 ))) 53 -))) 54 -))) 55 -|(% style="width:187px" %)((( 56 -[[LGT92>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/142-lgt-92.html]], 57 -)))|(% style="width:330px" %)((( 58 -LoRaWAN GPS Tracker 59 -)))|(% style="width:445px" %)((( 60 -((( 61 -LGT92 v1.6.3 <~-~-> DR-LWS-003; 62 -))) 63 - 64 -((( 65 -((( 32 +|(% style="width:187px" %)[[LGT92>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/142-lgt-92.html]],|(% style="width:349px" %)LoRaWAN GPS Tracker|(% style="width:453px" %)LGT92 v1.6.3 <~-~-> DR-LWS-003;((( 66 66 LGT92 v1.6.4 <~-~-> DR-LWS-005;~-~-> Support since this version 67 67 ))) 68 -))) 69 -))) 70 -|(% style="width:187px" %)((( 71 -[[LBT1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/165-lbt1.html]], 72 -)))|(% style="width:330px" %)((( 73 -LoRaWAN BLE Indoor Tracker 74 -)))|(% style="width:445px" %)((( 75 -LBT1 v1.0 <~-~-> DR-LWS-005; 76 -))) 77 -|(% style="width:187px" %)((( 78 -[[RS485-LN>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/154-rs485-ln.html]], 79 -)))|(% style="width:330px" %)((( 80 -LoRaWAN RS485 Modbus Converter 81 -)))|(% style="width:445px" %)((( 82 -RS485-LN v1.3 <~-~-> DR-LWS-005; 83 -))) 84 -|(% style="width:187px" %)((( 85 -[[LHT65>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/151-lht65.html]], 86 -)))|(% style="width:330px" %)((( 87 -LoRaWAN Temperature & Humidity Sensor 88 -)))|(% style="width:445px" %)((( 89 -((( 90 -LHT65 v1.7 <~-~-> DR-LWS-003; 91 -))) 92 - 93 -((( 94 -((( 35 +|(% style="width:187px" %)[[LBT1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/165-lbt1.html]],|(% style="width:349px" %)LoRaWAN BLE Indoor Tracker|(% style="width:453px" %)LBT1 v1.0 <~-~-> DR-LWS-005; 36 +|(% style="width:187px" %)[[RS485-LN>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/154-rs485-ln.html]],|(% style="width:349px" %)LoRaWAN RS485 Modbus Converter|(% style="width:453px" %)RS485-LN v1.3 <~-~-> DR-LWS-005; 37 +|(% style="width:187px" %)[[LHT65>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/151-lht65.html]],|(% style="width:349px" %)LoRaWAN Temperature & Humidity Sensor|(% style="width:453px" %)LHT65 v1.7 <~-~-> DR-LWS-003;((( 95 95 LHT65 v1.8.0 <~-~-> DR-LWS-005;~-~-> Support since this version 96 96 ))) 97 -))) 98 -))) 99 99 100 - 101 101 = 4. System Management Commands = 102 102 103 103 == 4.1 Change Uplink Interval == ... ... @@ -109,7 +109,7 @@ 109 109 **AT Command: AT+TDC** 110 110 ))) 111 111 112 -(% border="1"style="background-color:#ffffcc; color:green; width:727.222px" %)52 +(% style="background-color:#ffffcc; color:green; width:727.222px" %) 113 113 |=(% colspan="3" style="width: 724px;" %)AT+TDC 114 114 |(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response** 115 115 |(% style="width:165px" %)AT+TDC=?|(% style="width:227px" %)Show current transmit Interval|(% style="width:329px" %)30000((( ... ... @@ -125,18 +125,13 @@ 125 125 **Downlink Command: 0x01** 126 126 {{/info}} 127 127 128 -((( 129 129 Format: Command Code (0x01) followed by 3 bytes time value. 130 -))) 131 131 132 -((( 133 133 If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01. 134 -))) 135 135 136 136 * **Example 1**: Downlink Payload:** 0100001E** ~/~/ Set Transmit Interval (TDC) = 30 seconds 137 137 * **Example 2**: Downlink Payload:** 0100003C** ~/~/ Set Transmit Interval (TDC) = 60 seconds 138 138 139 - 140 140 == 4.2 Reboot End Node == 141 141 142 142 Feature: Reboot End Node to perform a new OTAA or ABP Join. ... ... @@ -145,7 +145,7 @@ 145 145 **AT Command: ATZ** 146 146 {{/info}} 147 147 148 -(% border=" 1" style="background-color:#ffffcc; color:green; width:727.222px" %)83 +(% border="0" style="background-color:#ffffcc; color:green; width:727.222px" %) 149 149 |=(% colspan="3" %)ATZ: Trig a reset of the MCU 150 150 |**Command Example**|**Function**|**Response** 151 151 |ATZ|Reset MCU|((( ... ... @@ -166,16 +166,10 @@ 166 166 **Downlink Command: 0x04** 167 167 {{/info}} 168 168 169 -((( 170 170 Format: Command Code (0x04) followed by FF. 171 -))) 172 172 173 -((( 174 174 If the downlink payload=**04FF**, the end node will reboot. 175 175 176 - 177 -))) 178 - 179 179 == 4.3 Reset to factory Default == 180 180 181 181 Feature: Reset the parameters to Factory Default, factory default value depends on the firmware settings, the OTAA and ABP keys will reserve after this command. ... ... @@ -184,7 +184,7 @@ 184 184 **AT Command: AT+FDR** 185 185 {{/info}} 186 186 187 -(% border="1"style="background-color:#ffffcc; color:green; width:831.222px" %)116 +(% style="background-color:#ffffcc; color:green; width:831.222px" %) 188 188 |=(% colspan="3" style="width: 828px;" %)Reset to factory default 189 189 |(% style="width:181px" %)**Command Example**|(% style="width:181px" %)**Function**|(% style="width:465px" %)**Response** 190 190 |(% style="width:181px" %)AT+FDR|(% style="width:181px" %)Reset to factory default|(% style="width:465px" %)((( ... ... @@ -205,13 +205,9 @@ 205 205 **Downlink Command: 0x04** 206 206 {{/info}} 207 207 208 -((( 209 209 Format: Command Code (0x04) followed by FE. 210 -))) 211 211 212 -((( 213 213 If the downlink payload=**04FE**, Reset Parameters to Factory Default, Keys Reserve. 214 -))) 215 215 216 216 217 217 == 4.4 Show Firmware Version == ... ... @@ -222,10 +222,10 @@ 222 222 **AT Command: AT+VER** 223 223 {{/info}} 224 224 225 -(% border="1"style="background-color:#ffffcc; color:green; width:586px" %)226 -|=(% colspan="3" style="width: 583px;"%)AT+VER: Image Version and Frequency Band227 -| (% style="width:170px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:113px" %)**Response**228 -| (% style="width:170px" %)AT+VER=?|(% style="width:300px" %)Show Image version and Frequency Band|(% style="width:113px" %)(((150 +(% style="background-color:#ffffcc; color:green" %) 151 +|=(% colspan="3" %)AT+VER: Image Version and Frequency Band 152 +|**Command Example**|**Function**|**Response** 153 +|AT+VER=?|Show Image version and Frequency Band|((( 229 229 1.3 EU868 230 230 231 231 OK ... ... @@ -235,25 +235,17 @@ 235 235 **Downlink Command: 0x26 (Valid in 006 stack)** 236 236 {{/info}} 237 237 238 -((( 239 239 Downlink Format: 0x26 240 -))) 241 241 242 -((( 243 243 Device will reply with firmware version info, device info. frequency band info. detail please check device user manual. Total 5 bytes Example: If device is of firmware version 1.1.0 Upload: xx ~-~- yy ~-~- zz ~-~- 110 total 5 bytes 244 -))) 245 245 246 -((( 247 247 **xx: Software Type:** 248 -))) 249 249 250 250 * 0x00 01: LGT92 Version 251 251 * 0x00 02: LBT1 252 252 * 0x00 03: LSE01/LDDS75/LDDS20/LSPH01/LLMS01/LSNPK01 253 253 254 -((( 255 255 **yy: Frequency Band:** 256 -))) 257 257 258 258 * 0x01: EU868 259 259 * 0x02: US915 ... ... @@ -266,9 +266,7 @@ 266 266 * 0x09: AS923-2 267 267 * 0xa0: AS923-3 268 268 269 -((( 270 270 **zz: Subband** 271 -))) 272 272 273 273 firmware version: v1.1.0 ~-~-> 110 274 274 ... ... @@ -281,7 +281,7 @@ 281 281 **AT Command: AT+CFG** 282 282 {{/info}} 283 283 284 -(% border="1"style="background-color:#ffffcc; color:green; width:599.222px" %)199 +(% style="background-color:#ffffcc; color:green; width:599.222px" %) 285 285 |=(% colspan="3" style="width: 596px;" %)AT+CFG: Print all configurations 286 286 |(% style="width:160px" %)**Command Example**|(% style="width:154px" %)**Function**|(% style="width:280px" %)**Response** 287 287 |(% style="width:160px" %)AT+CFG|(% style="width:154px" %)Show all configures|(% style="width:280px" %)((( ... ... @@ -309,7 +309,7 @@ 309 309 **AT Command: AT+APPEUI** 310 310 {{/info}} 311 311 312 -(% border="1"style="background-color:#ffffcc; color:green; width:686.222px" %)227 +(% style="background-color:#ffffcc; color:green; width:686.222px" %) 313 313 |=(% colspan="3" style="width: 683px;" %)AT+APPEUI 314 314 |(% style="width:305px" %)**Command Example**|(% style="width:186px" %)**Function**|(% style="width:191px" %)**Response** 315 315 |(% style="width:305px" %)AT+APPEUI=?|(% style="width:186px" %)Get the Application EUI|(% style="width:191px" %)00 b3 d5 00 00 00 00 00((( ... ... @@ -317,7 +317,6 @@ 317 317 ))) 318 318 |(% style="width:305px" %)AT+APPEUI=00 b3 d5 7e f0 00 4d 34|(% style="width:186px" %)Set the Application EUI|(% style="width:191px" %)OK 319 319 320 - 321 321 == 5.2 Application Key == 322 322 323 323 Feature: Get or Set the Application Key. ... ... @@ -326,7 +326,7 @@ 326 326 **AT Command: AT+APPKEY** 327 327 {{/info}} 328 328 329 -(% border="1"style="background-color:#ffffcc; color:green; width:976.222px" %)243 +(% style="background-color:#ffffcc; color:green; width:976.222px" %) 330 330 |=(% colspan="3" style="width: 973px;" %)AT+APPKEY 331 331 |(% style="width:441px" %)**Command Example**|(% style="width:180px" %)**Function**|(% style="width:350px" %)**Response** 332 332 |(% style="width:441px" %)AT+APPKEY=?|(% style="width:180px" %)Get the Application Key|(% style="width:350px" %)00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35((( ... ... @@ -338,17 +338,14 @@ 338 338 339 339 Feature: Get or Set the Application Session Key. 340 340 341 -{{info}} 342 -**AT Command: AT+APPSKEY** 343 -{{/info}} 255 +AT Command: AT+APPSKEY 344 344 345 -(% border="1" style="background-color:#ffffcc; color:green; width:1040.22px" %) 346 -|=(% colspan="3" style="width: 1037px;" %)AT+APPSKEY 347 -|(% style="width:451px" %)**Command Example**|(% style="width:231px" %)**Function**|(% style="width:354px" %)**Response** 348 -|(% style="width:451px" %)AT+APPSKEY=?|(% style="width:231px" %)Get the Application Session Key|(% style="width:354px" %)00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2((( 257 +|=(% colspan="3" %)AT+APPSKEY 258 +|**Command Example**|**Function**|**Response** 259 +|AT+APPSKEY=?|Get the Application Session Key|00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2((( 349 349 OK 350 350 ))) 351 -| (% style="width:451px" %)AT+APPSKEY=00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2|(% style="width:231px" %)Set the Application Session Key|(% style="width:354px" %)(While Error in format, return AT_PARAM_ERROR)(((262 +|AT+APPSKEY=00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2|Set the Application Session Key.|(While Error in format, return AT_PARAM_ERROR)((( 352 352 OK 353 353 ))) 354 354 ... ... @@ -356,76 +356,58 @@ 356 356 357 357 Feature: Get or Set the Device Address. 358 358 359 -{{info}} 360 -**AT Command: AT+DADDR** 361 -{{/info}} 270 +AT Command: AT+DADDR 362 362 363 -(% border="1" style="background-color:#ffffcc; color:green; width:795.222px" %) 364 -|=(% colspan="3" style="width: 792px;" %)AT+DADDR 365 -|(% style="width:192px" %)**Command Example**|(% style="width:241px" %)**Function**|(% style="width:359px" %)**Response** 366 -|(% style="width:192px" %)AT+DADDR=?|(% style="width:241px" %)Get the Application Session Key.|(% style="width:359px" %)(While Error in format, return AT_PARAM_ERROR)((( 272 +|=(% colspan="3" %)AT+DADDR 273 +|**Command Example**|**Function**|**Response** 274 +|AT+DADDR=?|Get the Application Session Key.|(While Error in format, return AT_PARAM_ERROR)((( 367 367 A8 40 41 FF 368 368 369 369 OK 370 370 ))) 371 -| (% style="width:192px" %)AT+DADDR=A8 40 41 FF|(% style="width:241px" %)Set the Application Session Key.|(% style="width:359px" %)OK279 +|AT+DADDR=A8 40 41 FF|Set the Application Session Key.|OK 372 372 373 373 == 5.5 Device EUI == 374 374 375 375 Feature: Get or Set the Device EUI. 376 376 377 -{{info}} 378 -**AT Command: AT+DEUI** 379 -{{/info}} 285 +AT Command: AT+DEUI 380 380 381 -(% border="1" style="background-color:#ffffcc; color:green; width:1035.22px" %) 382 -|=(% colspan="3" style="width: 1032px;" %)AT+DEUI 383 -|(% style="width:250px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:634px" %)**Response** 384 -|(% style="width:250px" %)AT+DEUI=?|(% style="width:147px" %)Get the Device EUI.|(% style="width:634px" %)00 44 34 22 33 45 55 55((( 287 +|=(% colspan="3" %)AT+DEUI 288 +|**Command Example**|**Function**|**Response** 289 +|AT+DEUI=?|Get the Device EUI.|00 44 34 22 33 45 55 55((( 385 385 OK 386 386 ))) 387 -| (% style="width:250px" %)AT+DEUI=A8 40 41 FF FF 12 34 56|(% style="width:147px" %)Set the Device EUI.|(% style="width:634px" %)(System will write new value to Device EUI,While Error in format, return AT_PARAM_ERROR)(((292 +|AT+DEUI=A8 40 41 FF FF 12 34 56|Set the Device EUI.|(System will write new value to Device EUI,While Error in format, return AT_PARAM_ERROR)((( 388 388 OK 389 389 ))) 390 390 391 - 392 - 393 393 == 5.6 Network ID == 394 394 395 395 Feature: Get or Set the Network ID.(You can enter this command change only after successful network connection) 396 396 397 -{{info}} 398 -**AT Command: AT+NWKID** 399 -{{/info}} 300 +AT Command: AT+NWKID 400 400 401 -(% border="1" style="background-color:#ffffcc; color:green; width:448.222px" %) 402 -|=(% colspan="3" style="width: 445px;" %)AT+NWKID 403 -|(% style="width:191px" %)**Command Example**|(% style="width:153px" %)**Function**|(% style="width:101px" %)**Response** 404 -|(% style="width:191px" %)AT+NWKID=?|(% style="width:153px" %)Get the Network ID.|(% style="width:101px" %)a8 40 41 ff((( 302 +|=(% colspan="3" %)AT+NWKID 303 +|**Command Example**|**Function**|**Response** 304 +|AT+NWKID=?|Get the Network ID.|a8 40 41 ff((( 405 405 OK 406 406 ))) 407 -| (% style="width:191px" %)AT+NWKID=A8 40 41 FF|(% style="width:153px" %)Set the Network ID.|(% style="width:101px" %)OK307 +|AT+NWKID=A8 40 41 FF|Set the Network ID.|OK 408 408 409 - 410 - 411 411 == 5.7 Network Session Key == 412 412 413 413 Feature: Get or Set the Network Session Key 414 414 415 -{{info}} 416 -**AT Command: AT+NWKSKEY** 417 -{{/info}} 313 +AT Command: AT+NWKSKEY 418 418 419 -(% border="1" style="background-color:#ffffcc; color:green; width:1017.22px" %) 420 -|=(% colspan="3" style="width: 1014px;" %)AT+NWKSKEY 421 -|(% style="width:455px" %)**Command Example**|(% style="width:215px" %)**Function**|(% style="width:343px" %)**Response** 422 -|(% style="width:455px" %)AT+NWKSKEY=?|(% style="width:215px" %)Get the Network Session Key.|(% style="width:343px" %)00 4f 19 25 52 ce 97 09 d7 fa 84 71 db 51 02 92((( 315 +|=(% colspan="3" %)AT+NWKSKEY 316 +|**Command Example**|**Function**|**Response** 317 +|AT+NWKSKEY=?|Get the Network Session Key.|00 4f 19 25 52 ce 97 09 d7 fa 84 71 db 51 02 92((( 423 423 OK 424 424 ))) 425 -| (% style="width:455px" %)AT+NWKSKEY=A8 40 41 FF FF 12 34 56 00 01 02 04 05 06 06 07|(% style="width:215px" %)Set the Network Session Key.|(% style="width:343px" %)OK320 +|AT+NWKSKEY=A8 40 41 FF FF 12 34 56 00 01 02 04 05 06 06 07|Set the Network Session Key.|OK 426 426 427 - 428 - 429 429 = 6. Joining and sending date on LoRaWAN network = 430 430 431 431 == 6.1 Confirm Mode == ... ... @@ -432,18 +432,15 @@ 432 432 433 433 Feature: Get or Set the confirmation mode (0-1). 434 434 435 -{{info}} 436 -**AT Command: AT+CFM** 437 -{{/info}} 328 +AT Command: AT+CFM 438 438 439 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %) 440 -|=(% colspan="3" style="width: 707px;" %)AT+CFM 441 -|(% style="width:155px" %)**Command Example**|(% style="width:205px" %)**Function**|(% style="width:346px" %)**Response** 442 -|(% style="width:155px" %)AT+CFM=?|(% style="width:205px" %)Get the confirmation mode|(% style="width:346px" %)0((( 330 +|=(% colspan="3" %)AT+CFM 331 +|**Command Example**|**Function**|**Response** 332 +|AT+CFM=?|Get the confirmation mode|0((( 443 443 OK 444 444 ))) 445 -| (% style="width:155px" %)AT+CFM=1|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)OK446 -| (% style="width:155px" %)AT+CFM=2|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)While Error in format, return AT_PARAM_ERROR335 +|AT+CFM=1|Set the confirmation mode|OK 336 +|AT+CFM=2|Set the confirmation mode|While Error in format, return AT_PARAM_ERROR 447 447 448 448 Downlink Command: 0x05 449 449 ... ... @@ -454,132 +454,100 @@ 454 454 * Example 1: Downlink Payload: 0501 ~/~/ Set AT+CFM=1 455 455 * Example 2: Downlink Payload: 0500 ~/~/ Set AT+CFM=0 456 456 457 - 458 - 459 459 == 6.2 Confirm Status == 460 460 461 461 Feature: Get confirmation status of the last AT+SEND (0-1). 462 462 463 -{{info}} 464 -**AT Command: AT+CFS** 465 -{{/info}} 351 +AT Command: AT+CFS 466 466 467 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %) 468 -|=(% colspan="3" style="width: 531px;" %)AT+CFS 469 -|(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:178px" %)**Response** 470 -|(% style="width:156px" %)AT+CFS=?|(% style="width:193px" %)Get confirmation status|(% style="width:178px" %)0((( 353 +|=(% colspan="3" %)AT+CFS 354 +|**Command Example**|**Function**|**Response** 355 +|AT+CFS=?|Get confirmation status|0((( 471 471 OK 472 472 ))) 473 473 474 - 475 - 476 476 == 6.3 Join LoRa® Network == 477 477 478 478 Feature: Join network. 479 479 480 -{{info}} 481 -**AT Command: AT+JOIN** 482 -{{/info}} 363 +AT Command: AT+JOIN 483 483 484 -(% border="1" style="background-color:#ffffcc; color:green; width:647.222px" %) 485 -|=(% colspan="3" style="width: 644px;" %)AT+JOIN 486 -|(% style="width:163px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:334px" %)**Response** 487 -|(% style="width:163px" %)AT+JOIN ?|(% style="width:147px" %)Get imformation.|(% style="width:334px" %)AT+JOIN: Join network((( 365 +|=(% colspan="3" %)AT+JOIN 366 +|**Command Example**|**Function**|**Response** 367 +|AT+JOIN ?|Get imformation.|AT+JOIN: Join network((( 488 488 OK 489 489 490 490 While Error in format, return AT_BUSY_ERROR 491 491 ))) 492 492 493 - 494 494 == 6.4 LoRa® Network Join Mode == 495 495 496 496 Feature: Get or Set the Network Join Mode. (0: ABP, 1: OTAA). 497 497 498 -{{info}} 499 -**AT Command: AT+NJM** 500 -{{/info}} 377 +AT Command: AT+NJM 501 501 502 -(% border="1" style="background-color:#ffffcc; color:green; width:753.222px" %) 503 -|=(% colspan="3" style="width: 750px;" %)AT+NJM 504 -|(% style="width:162px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:361px" %)**Response** 505 -|(% style="width:162px" %)AT+NJM=?|(% style="width:227px" %)Get the Network Join Mode|(% style="width:361px" %)1((( 379 +|=(% colspan="3" %)AT+NJM 380 +|**Command Example**|**Function**|**Response** 381 +|AT+NJM=?|Get the Network Join Mode|1((( 506 506 OK 507 507 ))) 508 -| (% style="width:162px" %)AT+NJM=0|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)OK509 -| (% style="width:162px" %)AT+NJM=2|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)While Error in format, return AT_PARAM_ERROR384 +|AT+NJM=0|Set the Network Join Mode|OK 385 +|AT+NJM=2|Set the Network Join Mode|While Error in format, return AT_PARAM_ERROR 510 510 511 -{{info}} 512 -**Downlink Command: 0x20** 513 -{{/info}} 387 +Downlink Command: 0x20 514 514 515 515 Format: Command Code (0x20) followed by 1 bytes mode value. 516 516 517 517 If the downlink payload=2000, it means set the Network Join Mode, while type code is 20. 518 518 519 -* **Example 1:**Downlink Payload:**2000**~/~/ Set AT+NJM=O520 -* **Example 2:**Downlink Payload:**2001**~/~/ Set AT+NJM=1393 +* Example 1: Downlink Payload: 2000 ~/~/ Set AT+NJM=O 394 +* Example 2: Downlink Payload: 2001 ~/~/ Set AT+NJM=1 521 521 522 - 523 523 == 6.5 LoRa® Network Join Status == 524 524 525 525 Feature: LoRa® Network Join Status. 526 526 527 -{{info}} 528 -**AT Command: AT+NJS** 529 -{{/info}} 400 +AT Command: AT+NJS 530 530 531 -(% border="1" style="background-color:#ffffcc; color:green; width:498.222px" %) 532 -|=(% colspan="3" style="width: 495px;" %)AT+NJS 533 -|(% style="width:169px" %)**Command Example**|(% style="width:164px" %)**Function**|(% style="width:161px" %)**Response** 534 -|(% style="width:169px" %)AT+NJS=?|(% style="width:164px" %)Get the join status.|(% style="width:161px" %)0((( 402 +|=(% colspan="3" %)AT+NJS 403 +|**Command Example**|**Function**|**Response** 404 +|AT+NJS=?|Get the join status.|0((( 535 535 OK 536 536 ))) 537 537 538 - 539 539 == 6.6 Print Last Received Data in Raw Format == 540 540 541 541 Feature: Print Last Received Data in Raw Format<port:data>. 542 542 543 -{{info}} 544 -**AT Command: AT+RECV** 545 -{{/info}} 412 +AT Command: AT+RECV 546 546 547 -(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %) 548 -|=(% colspan="3" style="width: 584px;" %)AT+RECV 549 -|(% style="width:161px" %)**Command Example**|(% style="width:272px" %)**Function**|(% style="width:150px" %)**Response** 550 -|(% style="width:161px" %)AT+RECV=?|(% style="width:272px" %)print last received data in raw format.|(% style="width:150px" %)0:((( 414 +|=(% colspan="3" %)AT+RECV 415 +|**Command Example**|**Function**|**Response** 416 +|AT+RECV=?|print last received data in raw format.|0:((( 551 551 OK 552 552 ))) 553 553 554 - 555 555 == 6.7 Print Last Received Data in Binary Format == 556 556 557 557 Feature: Print Last Received Data in Binary Format<port:data>. 558 558 559 -{{info}} 560 -**AT Command: AT+RECVB** 561 -{{/info}} 424 +AT Command: AT+RECVB 562 562 563 -(% border="1" style="background-color:#ffffcc; color:green; width:793.222px" %) 564 -|=(% colspan="3" style="width: 790px;" %)AT+RECVB 565 -|(% style="width:173px" %)**Command Example**|(% style="width:497px" %)**Function**|(% style="width:120px" %)**Response** 566 -|(% style="width:173px" %)AT+RECVB=?|(% style="width:497px" %)print last received data in binary format (with hexadecimal values).|(% style="width:120px" %)2: 0010((( 426 +|=(% colspan="3" %)AT+RECVB 427 +|**Command Example**|**Function**|**Response** 428 +|AT+RECVB=?|print last received data in binary format (with hexadecimal values).|2: 0010((( 567 567 OK 568 568 ))) 569 569 570 - 571 571 == 6.8 Send Text Data == 572 572 573 573 Feature: Send Text Data<port:data>. 574 574 575 -{{info}} 576 -**AT Command: AT+SEND** 577 -{{/info}} 436 +AT Command: AT+SEND 578 578 579 -(% border="1" style="background-color:#ffffcc; color:green; width:991.222px" %) 580 -|=(% colspan="3" style="width: 988px;" %)AT+SEND 581 -|(% style="width:201px" %)**Command Example**|(% style="width:340px" %)**Function**|(% style="width:446px" %)**Response** 582 -|(% style="width:201px" %)AT+SEND=12:hello world|(% style="width:340px" %)Send text data along with the application port.|(% style="width:446px" %)OK((( 438 +|=(% colspan="3" %)AT+SEND 439 +|**Command Example**|**Function**|**Response** 440 +|AT+SEND=12:hello world|Send text data along with the application port.|OK((( 583 583 While Error in format, return 584 584 585 585 AT_BUSY_ERROR/AT_BUSY_ERROR/AT_NO_NETWORK_JOINED ... ... @@ -587,26 +587,21 @@ 587 587 588 588 ))) 589 589 590 - 591 591 == 6.9 Send Hexadecimal Data == 592 592 593 593 Feature: Send hexadecimal data along with the application port. 594 594 595 -{{info}} 596 -**AT Command: AT+SENDB** 597 -{{/info}} 452 +AT Command: AT+SENDB 598 598 599 -(% border="1" style="background-color:#ffffcc; color:green; width:1120.22px" %) 600 -|=(% colspan="3" style="width: 1117px;" %)AT+SENDB 601 -|(% style="width:257px" %)**Command Example**|(% style="width:406px" %)**Function**|(% style="width:453px" %)**Response** 602 -|(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)OK 603 -|(% style="width:257px" %)AT+SENDB=abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)While Error in format, return((( 454 +|=(% colspan="3" %)AT+SENDB 455 +|**Command Example**|**Function**|**Response** 456 +|AT+SENDB=12:abcdef0123456789|Send hexadecimal data along with the application port.|OK 457 +|AT+SENDB=abcdef0123456789|Send hexadecimal data along with the application port.|While Error in format, return((( 604 604 AT_PARAM_ERROR AT_BUSY_ERROR/AT_NO_NETWORK_JOINED 605 605 606 606 607 607 ))) 608 608 609 - 610 610 = 7. LoRaWAN network management = 611 611 612 612 == 7.1 Adaptive Data Rate == ... ... @@ -613,289 +613,231 @@ 613 613 614 614 Feature: Get or Set the Adaptive Data Rate setting. (0: off, 1: on). 615 615 616 -{{info}} 617 -**AT Command: AT+ADR** 618 -{{/info}} 619 619 620 -(% border="1" style="background-color:#ffffcc; color:green; width:683.222px" %) 621 -|=(% colspan="3" style="width: 680px;" %)AT+ADR 622 -|(% style="width:162px" %)**Command Example**|(% style="width:266px" %)**Function**|(% style="width:250px" %)**Response** 623 -|(% style="width:162px" %)AT+ADR=?|(% style="width:266px" %)Get the Adaptive Data Rate setting.|(% style="width:250px" %)1((( 470 +AT Command: AT+ADR 471 + 472 +|=(% colspan="3" %)AT+ADR 473 +|**Command Example**|**Function**|**Response** 474 +|AT+ADR=?|Get the Adaptive Data Rate setting.|1((( 624 624 OK 625 625 ))) 626 -| (% style="width:162px" %)AT+ADR=0|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:250px" %)OK627 -| (% style="width:162px" %)AT+ADR=2|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:250px" %)While Error in format, return(((477 +|AT+ADR=0|Set the Adaptive Data Rate setting.|OK 478 +|AT+ADR=2|Set the Adaptive Data Rate setting.|While Error in format, return((( 628 628 AT_PARAM_ERROR 629 629 ))) 630 630 631 -{{info}} 632 -**Downlink Command: 0x22** 633 -{{/info}} 482 +Downlink Command: 0x22 634 634 635 635 636 636 If the downlink payload=2201, it means setting the adaptive data rate to 1, while type code is 22. 637 637 638 -* **Example 1**: Downlink Payload:**2201**~/~/ Set AT+ADR=1.639 -* **Example 2**: Downlink Payload:**2200FFFF**~/~/ Set AT+ADR=0.487 +* Example 1: Downlink Payload: 2201 ~/~/ Set AT+ADR=1. 488 +* Example 2: Downlink Payload: 2200FFFF ~/~/ Set AT+ADR=0. 640 640 641 - 642 642 == 7.2 LoRa® Class == 643 643 644 644 Feature: Get or Set the Device Class(Currently only support class A, class C). 645 645 646 -{{info}} 647 -**AT Command:AT+CLASS** 648 -{{/info}} 494 +AT Command:AT+CLASS 649 649 650 -(% border="1" style="background-color:#ffffcc; color:green; width:507.222px" %) 651 -|=(% colspan="3" style="width: 504px;" %)AT+CLASS 652 -|(% style="width:163px" %)**Command Example**|(% style="width:166px" %)**Function**|(% style="width:175px" %)**Response** 653 -|(% style="width:163px" %)AT+CLASS=?|(% style="width:166px" %)Get the Device Class.|(% style="width:175px" %)A((( 496 +|=(% colspan="3" %)AT+CLASS 497 +|**Command Example**|**Function**|**Response** 498 +|AT+CLASS=?|Get the Device Class.|A((( 654 654 OK 655 655 ))) 656 -| (% style="width:163px" %)AT+CLASS=C|(% style="width:166px" %)Set the Device Class.|(% style="width:175px" %)OK(((501 +|AT+CLASS=C|Set the Device Class.|OK((( 657 657 658 658 ))) 659 659 660 - 661 661 == 7.3 Duty Cycle Setting == 662 662 663 663 Feature: Get or Set the ETSI Duty Cycle setting - 0=disable, 1=enable - Only for testing. 664 664 665 -{{info}} 666 -**AT Command:AT+DCS** 667 -{{/info}} 509 +AT Command:AT+DCS 668 668 669 -(% border="1" style="background-color:#ffffcc; color:green; width:515.222px" %) 670 -|=(% colspan="3" style="width: 512px;" %)AT+DCS 671 -|(% style="width:165px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:107px" %)**Response** 672 -|(% style="width:165px" %)AT+DCS=?|(% style="width:239px" %)Get the ETSI Duty Cycle setting.|(% style="width:107px" %)1((( 511 +|=(% colspan="3" %)AT+DCS 512 +|**Command Example**|**Function**|**Response** 513 +|AT+DCS=?|Get the ETSI Duty Cycle setting.|1((( 673 673 OK 674 674 ))) 675 -| (% style="width:165px" %)AT+DCS=1|(% style="width:239px" %)Set the ETSI Duty Cycle setting.|(% style="width:107px" %)OK(((516 +|AT+DCS=1|Set the ETSI Duty Cycle setting.|OK((( 676 676 677 677 ))) 678 678 679 - 680 680 == 7.4 Data Rate == 681 681 682 682 Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) . Note: while set Data Rate, please use set Adptive Data Rate, ADR=0 first. otherwise device will response to server's ADR command and change the DR to the setting from server 683 683 684 -{{info}} 685 -**AT Command: AT+DR** 686 -{{/info}} 524 +AT Command: AT+DR 687 687 688 -(% border="1" style="background-color:#ffffcc; color:green; width:466.222px" %) 689 -|=(% colspan="3" style="width: 463px;" %)AT+DR 690 -|(% style="width:156px" %)**Command Example**|(% style="width:167px" %)**Function**|(% style="width:140px" %)**Response** 691 -|(% style="width:156px" %)AT+DR=?|(% style="width:167px" %)Get the Data Rate.|(% style="width:140px" %)5((( 526 +|=(% colspan="3" %)AT+DR 527 +|**Command Example**|**Function**|**Response** 528 +|AT+DR=?|Get the Data Rate.|5((( 692 692 OK 693 693 ))) 694 -| (% style="width:156px" %)AT+DR=2|(% style="width:167px" %)Set the Data Rate.|(% style="width:140px" %)OK(((531 +|AT+DR=2|Set the Data Rate.|OK((( 695 695 696 696 ))) 697 697 698 -{{info}} 699 -**Downlink Command: 0x2200aaFF** 700 -{{/info}} 535 +Downlink Command: 0x2200aaFF 701 701 702 702 703 703 If the downlink payload=220001FF, it means setting the data rate to 1, while type code is 22 00 aa FF. 704 704 705 -* **Example 1**: Downlink Payload:**220001FF**~/~/ Set AT+DR=1.706 -* **Example 2**: Downlink Payload:**220000FF**~/~/ Set AT+DR=0.540 +* Example 1: Downlink Payload: 220001FF ~/~/ Set AT+DR=1. 541 +* Example 2: Downlink Payload: 220000FF ~/~/ Set AT+DR=0. 707 707 708 - 709 709 == 7.5 Frame Counter Downlink == 710 710 711 711 Feature: Get or Set the Frame Counter Downlink. 712 712 713 -{{info}} 714 -**AT Command:AT+FCD** 715 -{{/info}} 547 +AT Command:AT+FCD 716 716 717 -(% border="1" style="background-color:#ffffcc; color:green; width:693.222px" %) 718 -|=(% colspan="3" style="width: 690px;" %)AT+FCD 719 -|(% style="width:162px" %)**Command Example**|(% style="width:258px" %)**Function**|(% style="width:269px" %)**Response** 720 -|(% style="width:162px" %)AT+FCD=?|(% style="width:258px" %)Get the Frame Counter Downlink.|(% style="width:269px" %)0((( 549 +|=(% colspan="3" %)AT+FCD 550 +|**Command Example**|**Function**|**Response** 551 +|AT+FCD=?|Get the Frame Counter Downlink.|0((( 721 721 OK 722 722 ))) 723 -| (% style="width:162px" %)AT+FCD=10|(% style="width:258px" %)Set the Frame Counter Downlink.|(% style="width:269px" %)(System will write new value to FCD)(((554 +|AT+FCD=10|Set the Frame Counter Downlink.|(System will write new value to FCD)((( 724 724 OK 725 725 726 726 727 727 ))) 728 728 729 - 730 730 == 7.6 Frame Counter Uplink == 731 731 732 732 Feature: Get or Set the Frame Counter Uplink. 733 733 734 -{{info}} 735 -**AT Command:AT+FCU** 736 -{{/info}} 564 +AT Command:AT+FCU 737 737 738 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %) 739 -|=(% colspan="3" style="width: 531px;" %)AT+FCU 740 -|(% style="width:177px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:113px" %)**Response** 741 -|(% style="width:177px" %)AT+FCU=?|(% style="width:239px" %)Get the Frame Counter Uplink.|(% style="width:113px" %)0((( 566 +|=(% colspan="3" %)AT+FCU 567 +|**Command Example**|**Function**|**Response** 568 +|AT+FCU=?|Get the Frame Counter Uplink.|0((( 742 742 OK 743 743 ))) 744 -| (% style="width:177px" %)AT+FCU=10|(% style="width:239px" %)Set the Frame Counter Uplink.|(% style="width:113px" %)OK(((571 +|AT+FCU=10|Set the Frame Counter Uplink.|OK((( 745 745 746 746 ))) 747 747 748 - 749 749 == 7.7 Join Accept Delay1 == 750 750 751 751 Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 1 in ms. 752 752 753 -{{info}} 754 -**AT Command:AT+JN1DL** 755 -{{/info}} 579 +AT Command:AT+JN1DL 756 756 757 -(% border="1" style="background-color:#ffffcc; color:green; width:537.222px" %) 758 -|=(% colspan="3" style="width: 534px;" %)AT+JN1DL 759 -|(% style="width:164px" %)**Command Example**|(% style="width:229px" %)**Function**|(% style="width:140px" %)**Response** 760 -|(% style="width:164px" %)AT+JN1DL=?|(% style="width:229px" %)Get the Join Accept Delay.|(% style="width:140px" %)5000((( 581 +|=(% colspan="3" %)AT+JN1DL 582 +|**Command Example**|**Function**|**Response** 583 +|AT+JN1DL=?|Get the Join Accept Delay.|5000((( 761 761 OK 762 762 ))) 763 -| (% style="width:164px" %)AT+JN1DL=10000|(% style="width:229px" %)Set the Join Accept Delay.|(% style="width:140px" %)OK(((586 +|AT+JN1DL=10000|Set the Join Accept Delay.|OK((( 764 764 765 765 ))) 766 766 767 - 768 768 == 7.8 Join Accept Delay2 == 769 769 770 770 Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 2 in ms. 771 771 772 -{{info}} 773 -**AT Command:AT+JN2DL** 774 -{{/info}} 594 +AT Command:AT+JN2DL 775 775 776 -(% border="1" style="background-color:#ffffcc; color:green; width:538.222px" %) 777 -|=(% colspan="3" style="width: 535px;" %)AT+JN2DL 778 -|(% style="width:160px" %)**Command Example**|(% style="width:228px" %)**Function**|(% style="width:146px" %)**Response** 779 -|(% style="width:160px" %)AT+JN2DL=?|(% style="width:228px" %)Get the Join Accept Delay.|(% style="width:146px" %)6000((( 596 +|=(% colspan="3" %)AT+JN2DL 597 +|**Command Example**|**Function**|**Response** 598 +|AT+JN2DL=?|Get the Join Accept Delay.|6000((( 780 780 OK 781 781 ))) 782 -| (% style="width:160px" %)AT+JN2DL=20000|(% style="width:228px" %)Set the Join Accept Delay.|(% style="width:146px" %)OK(((601 +|AT+JN2DL=20000|Set the Join Accept Delay.|OK((( 783 783 784 784 ))) 785 785 786 - 787 787 == 7.9 Public Network Mode == 788 788 789 789 Feature: Get or Set the public network mode. (0: off, 1: on) 790 790 791 -{{info}} 792 -**AT Command:AT+PNM** 793 -{{/info}} 609 +AT Command:AT+PNM 794 794 795 -(% border="1" style="background-color:#ffffcc; color:green; width:667.222px" %) 796 -|=(% colspan="3" style="width: 664px;" %)AT+PNM 797 -|(% style="width:166px" %)**Command Example**|(% style="width:225px" %)**Function**|(% style="width:272px" %)**Response** 798 -|(% style="width:166px" %)AT+PNM=?|(% style="width:225px" %)Get the public network mode.|(% style="width:272px" %)1((( 611 +|=(% colspan="3" %)AT+PNM 612 +|**Command Example**|**Function**|**Response** 613 +|AT+PNM=?|Get the public network mode.|1((( 799 799 OK 800 800 ))) 801 -| (% style="width:166px" %)AT+PNM=1|(% style="width:225px" %)Set the public network mode.|(% style="width:272px" %)(System will write new value to PNM)(((616 +|AT+PNM=1|Set the public network mode.|(System will write new value to PNM)((( 802 802 OK 803 803 804 804 805 805 ))) 806 806 807 - 808 808 == 7.10 Receive Delay1 == 809 809 810 810 Feature: Get or Set the delay between the end of the Tx and the Rx Window 1 in ms 811 811 812 -{{info}} 813 -**AT Command:AT+RX1DL** 814 -{{/info}} 626 +AT Command:AT+RX1DL 815 815 816 -(% border="1" style="background-color:#ffffcc; color:green; width:408.222px" %) 817 -|=(% colspan="3" style="width: 405px;" %)AT+RX1DL 818 -|(% style="width:155px" %)**Command Example**|(% style="width:128px" %)**Function**|(% style="width:122px" %)**Response** 819 -|(% style="width:155px" %)AT+RX1DL=?|(% style="width:128px" %)Get the delay.|(% style="width:122px" %)1000((( 628 +|=(% colspan="3" %)AT+RX1DL 629 +|**Command Example**|**Function**|**Response** 630 +|AT+RX1DL=?|Get the delay.|1000((( 820 820 OK 821 821 ))) 822 -| (% style="width:155px" %)AT+RX1DL=1500|(% style="width:128px" %)Set the delay.|(% style="width:122px" %)OK(((633 +|AT+RX1DL=1500|Set the delay.|OK((( 823 823 824 824 ))) 825 825 637 +== 7.11Receive Delay2 == 826 826 827 -== 7.11 Receive Delay2 == 828 - 829 829 Feature: Get or Set the delay between the end of the Tx and the Rx Window 2 in ms 830 830 831 -{{info}} 832 -**AT Command:AT+RX2DL** 833 -{{/info}} 641 +AT Command:AT+RX2DL 834 834 835 -(% border="1" style="background-color:#ffffcc; color:green; width:481.222px" %) 836 -|=(% colspan="3" style="width: 478px;" %)AT+RX2DL 837 -|(% style="width:175px" %)**Command Example**|(% style="width:152px" %)**Function**|(% style="width:150px" %)**Response** 838 -|(% style="width:175px" %)AT+RX2DL=?|(% style="width:152px" %)Get the delay.|(% style="width:150px" %)2000((( 643 +|=(% colspan="3" %)AT+RX2DL 644 +|**Command Example**|**Function**|**Response** 645 +|AT+RX2DL=?|Get the delay.|2000((( 839 839 OK 840 840 ))) 841 -| (% style="width:175px" %)AT+RX2DL=2500|(% style="width:152px" %)Set the delay.|(% style="width:150px" %)OK(((648 +|AT+RX2DL=2500|Set the delay.|OK((( 842 842 843 843 ))) 844 844 845 - 846 846 == 7.12 Rx2 Window Data Rate == 847 847 848 848 Feature: Get or Set the Rx2 window data rate (0-7 corresponding to DR_X) 849 849 850 -{{info}} 851 -**AT Command:AT+RX2DR** 852 -{{/info}} 656 +AT Command:AT+RX2DR 853 853 854 -(% border="1" style="background-color:#ffffcc; color:green; width:525.222px" %) 855 -|=(% colspan="3" style="width: 522px;" %)AT+RX2DR 856 -|(% style="width:160px" %)**Command Example**|(% style="width:232px" %)**Function**|(% style="width:130px" %)**Response** 857 -|(% style="width:160px" %)AT+RX2DR=?|(% style="width:232px" %)Get the Rx2 window data rate.|(% style="width:130px" %)2((( 658 +|=(% colspan="3" %)AT+RX2DR 659 +|**Command Example**|**Function**|**Response** 660 +|AT+RX2DR=?|Get the Rx2 window data rate.|2((( 858 858 OK 859 859 ))) 860 -| (% style="width:160px" %)AT+RX2DR=6|(% style="width:232px" %)Set the Rx2 window data rate.|(% style="width:130px" %)OK(((663 +|AT+RX2DR=6|Set the Rx2 window data rate.|OK((( 861 861 862 862 ))) 863 863 864 - 865 865 == 7.13 Rx2 Window Frequency == 866 866 867 867 Feature: Get or Set the Rx2 window frequency 868 868 869 -{{info}} 870 -**AT Command:AT+RX2FQ** 871 -{{/info}} 671 +AT Command:AT+RX2FQ 872 872 873 -(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %) 874 -|=(% colspan="3" style="width: 584px;" %)AT+RX2FQ 875 -|(% style="width:183px" %)**Command Example**|(% style="width:240px" %)**Function**|(% style="width:160px" %)**Response** 876 -|(% style="width:183px" %)AT+RX2FQ=?|(% style="width:240px" %)Get the Rx2 window frequency.|(% style="width:160px" %)434665000((( 673 +|=(% colspan="3" %)AT+RX2FQ 674 +|**Command Example**|**Function**|**Response** 675 +|AT+RX2FQ=?|Get the Rx2 window frequency.|434665000((( 877 877 OK 878 878 ))) 879 -| (% style="width:183px" %)AT+RX2FQ=434665000|(% style="width:240px" %)Set the Rx2 window frequency.|(% style="width:160px" %)OK(((678 +|AT+RX2FQ=434665000|Set the Rx2 window frequency.|OK((( 880 880 881 881 ))) 882 882 883 - 884 884 == 7.14 Transmit Power == 885 885 886 886 Feature: Get or Set the Transmit Power(0-5, MAX:0, MIN:5, according to LoRaWAN Spec, or 40=10dB, 41 = 11dB, …, 50 = 20dB which is out of LoRaWAN spec. ) 887 887 888 -{{info}} 889 -**AT Command:AT+TXP** 890 -{{/info}} 686 +AT Command:AT+TXP 891 891 892 -(% border="1" style="background-color:#ffffcc; color:green; width:465.222px" %) 893 -|=(% colspan="3" style="width: 462px;" %)AT+TXP 894 -|(% style="width:161px" %)**Command Example**|(% style="width:189px" %)**Function**|(% style="width:112px" %)**Response** 895 -|(% style="width:161px" %)AT+TXP=?|(% style="width:189px" %)Get the Transmit Power.|(% style="width:112px" %)0((( 688 +|=(% colspan="3" %)AT+TXP 689 +|**Command Example**|**Function**|**Response** 690 +|AT+TXP=?|Get the Transmit Power.|0((( 896 896 OK 897 897 ))) 898 -| (% style="width:161px" %)AT+TXP=1|(% style="width:189px" %)Set the Transmit Power.|(% style="width:112px" %)OK(((693 +|AT+TXP=1|Set the Transmit Power.|OK((( 899 899 900 900 ))) 901 901 ... ... @@ -903,190 +903,146 @@ 903 903 904 904 If the downlink payload=22000100, it means setting the TXP to 0. 905 905 906 -* **Example 1**: Downlink Payload:**22000102**~/~/ Set AT+TXP=2.907 -* **Example 2**: Downlink Payload:**220000FF**~/~/ Set AT+TXP=0.701 +* Example 1: Downlink Payload: 22000102 ~/~/ Set AT+TXP=2. 702 +* Example 2: Downlink Payload: 220000FF ~/~/ Set AT+TXP=0. 908 908 909 - 910 910 == 7.15 RSSI of the Last Received Packet == 911 911 912 912 Feature: Get or Set the Rx2 window frequency 913 913 914 -{{info}} 915 -**AT Command:AT+RSSI** 916 -{{/info}} 708 +AT Command:AT+RSSI 917 917 918 -(% border="1" style="background-color:#ffffcc; color:green; width:557.222px" %) 919 -|=(% colspan="3" style="width: 554px;" %)AT+RSSI 920 -|(% style="width:164px" %)**Command Example**|(% style="width:289px" %)**Function**|(% style="width:100px" %)**Response** 921 -|(% style="width:164px" %)AT+RSSI=?|(% style="width:289px" %)Get the RSSI of the last received packet.|(% style="width:100px" %)0((( 710 +|=(% colspan="3" %)AT+RSSI 711 +|**Command Example**|**Function**|**Response** 712 +|AT+RSSI=?|Get the RSSI of the last received packet.|0((( 922 922 OK 923 923 ))) 924 924 925 - 926 926 == 7.16 SNR of the Last Received Packet == 927 927 928 928 Feature: Get the SNR of the last received packet 929 929 930 -{{info}} 931 -**AT Command:AT+SNR** 932 -{{/info}} 720 +AT Command:AT+SNR 933 933 934 -(% border="1" style="background-color:#ffffcc; color:green; width:571.222px" %) 935 -|=(% colspan="3" style="width: 568px;" %)AT+SNR 936 -|(% style="width:164px" %)**Command Example**|(% style="width:290px" %)**Function**|(% style="width:113px" %)**Response** 937 -|(% style="width:164px" %)AT+SNR=?|(% style="width:290px" %)Get the RSSI of the last received packet.|(% style="width:113px" %)0((( 722 +|=(% colspan="3" %)AT+SNR 723 +|**Command Example**|**Function**|**Response** 724 +|AT+SNR=?|Get the RSSI of the last received packet.|0((( 938 938 OK 939 939 ))) 940 940 941 - 942 942 == 7.17 Application Port == 943 943 944 944 Feature: Get or set the application port. 945 945 946 -{{info}} 947 -**AT Command: AT+PORT** 948 -{{/info}} 732 +AT Command: AT+PORT 949 949 950 -(% border="1" style="background-color:#ffffcc; color:green; width:500.222px" %) 951 -|=(% colspan="3" style="width: 497px;" %)AT+PORT 952 -|(% style="width:157px" %)**Command Example**|(% style="width:204px" %)**Function**|(% style="width:135px" %)**Response** 953 -|(% style="width:157px" %)AT+PORT=?|(% style="width:204px" %)Get the application port|(% style="width:135px" %)21((( 734 +|=(% colspan="3" %)AT+PORT 735 +|**Command Example**|**Function**|**Response** 736 +|AT+PORT=?|Get the application port|21((( 954 954 OK 955 955 ))) 956 -| (% style="width:157px" %)AT+PORT=21|(% style="width:204px" %)Set the application port|(% style="width:135px" %)OK739 +|AT+PORT=21|Set the application port|OK 957 957 958 -{{info}} 959 -**Downlink Command: 0x23** 960 -{{/info}} 741 +Downlink Command: 0x23 961 961 962 962 Format: Command Code (0x23) followed by 1 bytes port value. 963 963 964 964 If the downlink payload=2301, it means set the application port to 1, while type code is 23. 965 965 966 -* **Example 1**: Downlink Payload:**2301**~/~/ set the application port to 1967 -* **Example 2**: Downlink Payload:**2305**~/~/ set the application port to 5747 +* Example 1: Downlink Payload: 2301 ~/~/ set the application port to 1 748 +* Example 2: Downlink Payload: 2305 ~/~/ set the application port to 5 968 968 969 - 970 970 == 7.18 Single Channel Mode == 971 971 972 972 Feature:Get or Set Frequency (Unit: Hz) for Single Channel Mode. 973 973 974 -{{info}} 975 -**AT Command: AT+CHS** 976 -{{/info}} 754 +AT Command: AT+CHS 977 977 978 -(% border="1" style="background-color:#ffffcc; color:green; width:603.222px" %) 979 -|=(% colspan="3" style="width: 600px;" %)AT+CHS 980 -|(% style="width:182px" %)**Command Example**|(% style="width:295px" %)**Function**|(% style="width:122px" %)**Response** 981 -|(% style="width:182px" %)AT+CHS=?|(% style="width:295px" %)Get Frequency for Single Channel Mode|(% style="width:122px" %)0((( 756 +|=(% colspan="3" %)AT+CHS 757 +|**Command Example**|**Function**|**Response** 758 +|AT+CHS=?|Get Frequency for Single Channel Mode|0((( 982 982 OK 983 983 ))) 984 -| (% style="width:182px" %)AT+CHS=868100000|(% style="width:295px" %)Set Frequency for Single Channel Mode|(% style="width:122px" %)OK761 +|AT+CHS=868100000|Set Frequency for Single Channel Mode|OK 985 985 986 - 987 987 == 7.19 Eight Channel Mode == 988 988 989 989 Feature: Get or Set eight channels mode,Only for US915,AU915,CN470. 990 990 991 -{{info}} 992 -**AT Command: AT+CHE** 993 -{{/info}} 767 +AT Command: AT+CHE 994 994 995 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %) 996 -|=(% colspan="3" style="width: 707px;" %)AT+CHE 997 -|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response** 998 -|(% style="width:160px" %)AT+CHE=?|(% style="width:198px" %)Get eight channels mode|(% style="width:349px" %)1((( 769 +|=(% colspan="3" %)AT+CHE 770 +|**Command Example**|**Function**|**Response** 771 +|AT+CHE=?|Get eight channels mode|1((( 999 999 902.3 902.5 902.7 902.9 903.1 903.3 903.5 903.7 1000 1000 1001 1001 OK 1002 1002 ))) 1003 -| (% style="width:160px" %)AT+CHE=1|(% style="width:198px" %)Set eight channels mode|(% style="width:349px" %)OK776 +|AT+CHE=1|Set eight channels mode|OK 1004 1004 1005 -{{info}} 1006 -**Downlink Command: 0x24** 1007 -{{/info}} 778 +Downlink Command: 0x24 1008 1008 1009 1009 Format: Command Code (0x24) followed by 1 bytes channel value. 1010 1010 1011 1011 If the downlink payload=2401, it means set channel mode to 1, while type code is 24. 1012 1012 1013 -* **Example 1**: Downlink Payload: 2401 ~/~/ set channel mode to 11014 -* **Example 2**: Downlink Payload: 2405 ~/~/ set channel mode to 5784 +* Example 1: Downlink Payload: 2401 ~/~/ set channel mode to 1 785 +* Example 2: Downlink Payload: 2405 ~/~/ set channel mode to 5 1015 1015 1016 - 1017 1017 == 7.20 Get or Set RXwindows1 timeout == 1018 1018 1019 1019 Feature:Get or Set the number of symbols to detect and timeout from RXwindow1(0 to 255). 1020 1020 1021 -{{info}} 1022 -**AT Command: AT+RX1WTO** 1023 -{{/info}} 791 +AT Command: AT+RX1WTO 1024 1024 1025 -(% border="1" style="background-color:#ffffcc; color:green; width:460.222px" %) 1026 -|=(% colspan="3" style="width: 457px;" %)AT+ RX1WTO 1027 -|(% style="width:163px" %)**Command Example**|(% style="width:201px" %)**Function**|(% style="width:93px" %)**Response** 1028 -|(% style="width:163px" %)AT+RX1WTO=?|(% style="width:201px" %)Get RXwindows1 timeout|(% style="width:93px" %)14((( 793 +|=(% colspan="3" %)AT+ RX1WTO 794 +|**Command Example**|**Function**|**Response** 795 +|AT+RX1WTO=?|Get RXwindows1 timeout|14((( 1029 1029 OK 1030 1030 ))) 1031 -| (% style="width:163px" %)AT+RX1WTO=60|(% style="width:201px" %)Set RXwindows1 timeout|(% style="width:93px" %)OK798 +|AT+RX1WTO=60|Set RXwindows1 timeout|OK 1032 1032 1033 -((( 1034 -**AT+RX1TWO** is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph. 1035 -))) 800 +AT+RX1TWO is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph. 1036 1036 1037 -[[image:image -20220526162535-1.png]]802 +[[~[~[image:https://wiki.dragino.com/images/thumb/5/51/RX1WTO.JPG/600px-RX1WTO.JPG~|~|alt="RX1WTO.JPG" height="239" width="600"~]~]>>url:https://wiki.dragino.com/index.php/File:RX1WTO.JPG]] 1038 1038 1039 -((( 1040 1040 Increasing thisvalue is equal to extending the time that the receiving window is opened, butthe corresponding power consumption will also increase. Properly increasingthis value can increase the success rate of the downlink. 1041 1041 1042 - 1043 -))) 1044 - 1045 1045 == 7.21 Get or Set RXwindows2 timeout == 1046 1046 1047 1047 Feature:Get or Set the number of symbols to detect and timeout from RXwindow2(0 to 255). 1048 1048 1049 -{{info}} 1050 -**AT Command: AT+RX2WTO** 1051 -{{/info}} 810 +AT Command: AT+RX2WTO 1052 1052 1053 -(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %) 1054 -|=(% colspan="3" style="width: 494px;" %)AT+ RX2WTO 1055 -|(% style="width:190px" %)**Command Example**|(% style="width:199px" %)**Function**|(% style="width:104px" %)**Response** 1056 -|(% style="width:190px" %)AT+RX2WTO=?|(% style="width:199px" %)Get RXwindows2 timeout|(% style="width:104px" %)7((( 812 +|=(% colspan="3" %)AT+ RX2WTO 813 +|**Command Example**|**Function**|**Response** 814 +|AT+RX2WTO=?|Get RXwindows2 timeout|7((( 1057 1057 OK 1058 1058 ))) 1059 -| (% style="width:190px" %)AT+RX2WTO=20|(% style="width:199px" %)Set RXwindows2 timeout|(% style="width:104px" %)OK817 +|AT+RX2WTO=20|Set RXwindows2 timeout|OK 1060 1060 1061 - 1062 1062 == 7.22 Setting up uplinkdwelltime (as923, au915) == 1063 1063 1064 1064 Feature: Get or Set uplinkdwelltime 1065 1065 1066 -{{info}} 1067 -**AT Command: AT+DWELLT** 1068 -{{/info}} 823 +AT Command: AT+DWELLT 1069 1069 1070 -(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %) 1071 -|=(% colspan="3" style="width: 494px;" %)AT+DWELLT 1072 -|(% style="width:183px" %)**Command Example**|(% style="width:179px" %)**Function**|(% style="width:131px" %)**Response** 1073 -|(% style="width:183px" %)AT+DWELLT=?|(% style="width:179px" %)Get uplinkdwelltime|(% style="width:131px" %)1((( 825 +|=(% colspan="3" %)AT+DWELLT 826 +|**Command Example**|**Function**|**Response** 827 +|AT+DWELLT=?|Get uplinkdwelltime|1((( 1074 1074 OK 1075 1075 ))) 1076 -| (% style="width:183px" %)AT+DWELLT=0|(% style="width:179px" %)Set uplinkdwelltime|(% style="width:131px" %)OK830 +|AT+DWELLT=0|Set uplinkdwelltime|OK 1077 1077 1078 -{{info}} 1079 -**Downlink Command: 0x25** 1080 -{{/info}} 832 +Downlink Command: 0x25 1081 1081 1082 1082 Format: Command Code (0x25) followed by 1 bytes state value. 1083 1083 1084 1084 If the downlink payload=2501, it means set uplinkdwelltime to 1, while type code is 25. 1085 1085 1086 -* **Example 1**: Downlink Payload:**2501**~/~/ set uplinkdwelltime to 11087 -* **Example 2**: Downlink Payload:**2500**~/~/ set uplinkdwelltime to 0838 +* Example 1: Downlink Payload: 2501 ~/~/ set uplinkdwelltime to 1 839 +* Example 2: Downlink Payload: 2500 ~/~/ set uplinkdwelltime to 0 1088 1088 1089 - 1090 1090 == 7.23 Set Packet Receiving Response Level == 1091 1091 1092 1092 Feature: Get or Set packet receiving response level. This feature is used to set compatible with different LoRaWAN servers. If RPL doesn;t match , user will see strange message in the server portal. ... ... @@ -1093,11 +1093,11 @@ 1093 1093 1094 1094 RPL value: 1095 1095 1096 -* **AT+RPL=0:**Device won't immediately reply any downlink commands from platform.1097 -* **AT+RPL=1:**Device will immediately reply message to Unconfirmed Data Down. Payload is 0x00.1098 -* **AT+RPL=2:**Device will immediately reply message to Confirmed Data Down. Payload is 0x00 and requied response header for this command.1099 -* **AT+RPL=3:**Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command.1100 -* **AT+RPL=4:**Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands.847 +* AT+RPL=0: Device won't immediately reply any downlink commands from platform. 848 +* AT+RPL=1: Device will immediately reply message to Unconfirmed Data Down. Payload is 0x00. 849 +* AT+RPL=2: Device will immediately reply message to Confirmed Data Down. Payload is 0x00 and requied response header for this command. 850 +* AT+RPL=3: Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command. 851 +* AT+RPL=4: Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands. 1101 1101 1102 1102 Case Analyes: 1103 1103 ... ... @@ -1105,46 +1105,37 @@ 1105 1105 * For Class C devices used in ChirpStack, need to set AT+RPL=4 because Chirpstack require immedietely reply message to MAC Command. 1106 1106 * For Class C devices used in TTI, need to set AT+RPL=4 because TTI require immediately reply message to Confirmed Data Down & MAC Command. 1107 1107 1108 -{{info}} 1109 -**AT Command: AT+RPL** 1110 -{{/info}} 859 +AT Command: AT+RPL 1111 1111 1112 -(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %) 1113 -|=(% colspan="3" style="width: 533px;" %)AT+RPL 1114 -|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response** 1115 -|(% style="width:160px" %)AT+RPL=?|(% style="width:263px" %)Get packet receiving response level|(% style="width:109px" %)1((( 861 +|=(% colspan="3" %)AT+RPL 862 +|**Command Example**|**Function**|**Response** 863 +|AT+RPL=?|Get packet receiving response level|1((( 1116 1116 OK 1117 1117 ))) 1118 -| (% style="width:160px" %)AT+RPL=0|(% style="width:263px" %)Set packet receiving response level|(% style="width:109px" %)OK866 +|AT+RPL=0|Set packet receiving response level|OK 1119 1119 1120 -{{info}} 1121 -**Downlink Command: 0x21** 1122 -{{/info}} 868 +Downlink Command: 0x21 1123 1123 1124 1124 Format: Command Code (0x21) followed by 1 bytes level value. 1125 1125 1126 1126 If the downlink payload=2101, it means set packet receiving response level to 1, while type code is 21. 1127 1127 1128 -* **Example 1**: Downlink Payload:**2101**~/~/ set packet receiving response level to 11129 -* **Example 2**: Downlink Payload:**2102**~/~/ set packet receiving response level to 2874 +* Example 1: Downlink Payload: 2101 ~/~/ set packet receiving response level to 1 875 +* Example 2: Downlink Payload: 2102 ~/~/ set packet receiving response level to 2 1130 1130 1131 - 1132 1132 = 8. AT Commands Combination = 1133 1133 1134 1134 == 8.1 Set a fix RX2DR for downlink window == 1135 1135 1136 -* **AT+ADR=0**~-~-> Disable ADR first1137 -* **AT+RX2DR=xxxx**~-~-> Set xxxx to your wanted DataRate881 +* AT+ADR=0 ~-~-> Disable ADR first 882 +* AT+RX2DR=xxxx ~-~-> Set xxxx to your wanted DataRate 1138 1138 1139 - 1140 1140 == 8.2 Use Downlink Command to set a fix uplink DR == 1141 1141 1142 -{{info}} 1143 -**Downlink Command: 0x22000500** 1144 -{{/info}} 886 +Downlink Command: 0x22000500 1145 1145 1146 1146 Same as: 1147 1147 1148 -* AT+ADR=0 ||anchor="H7.1AdaptiveDataRate"]]1149 -* AT+DR=5 ||anchor="H7.4DataRate"]]1150 -* AT+TXP=0 ||anchor="H7.14TransmitPower"]]890 +* AT+ADR=0 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Adaptive_Data_Rate]] 891 +* AT+DR=5 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Data_Rate]] 892 +* AT+TXP=0 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Transmit_Power]]
- image-20220511120050-1.png
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -XWiki.Xiaoling - Size
-
... ... @@ -1,1 +1,0 @@ 1 -136.3 KB - Content
- image-20220526162535-1.png
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -XWiki.Xiaoling - Size
-
... ... @@ -1,1 +1,0 @@ 1 -149.4 KB - Content