Changes for page End Device AT Commands and Downlink Command
Last modified by kai on 2024/09/06 10:00
Summary
-
Page properties (1 modified, 0 added, 0 removed)
-
Attachments (0 modified, 0 added, 2 removed)
Details
- Page properties
-
- Content
-
... ... @@ -1,9 +1,8 @@ 1 - **Contents：**1 +Contens 2 2 3 3 {{toc/}} 4 4 5 5 6 - 7 7 = 1. Introduction = 8 8 9 9 Dragino LoRaWAN End Node support two types of AT Commands and Downlink Commands: ... ... @@ -11,93 +11,34 @@ 11 11 * **Common Commands:** They should be available for each sensor, such as: change uplink interval, reset device. 12 12 * **Sensor Related Commands:** Only for special sensor, such as control relay, poll RS485 device. 13 13 14 -((( 15 15 **This page shows the common commands since Dragino LoRaWAN stack DR-LWS-005. Make sure the end node support stack higher than DR-LWS-005 before checking this page.** 16 16 17 -))) 18 18 19 19 = 2. How to use AT Commands or Downlink command = 20 20 21 21 * For AT Command , See Devices User Manual for Device. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]] 22 22 * For LoRaWAN Downlink: The gateway transfer downlink command in HEX format. This page shows the HEX format downlink code for each command. but some servers use base64 as downlink code. Below are reference for how to use downlink command: 23 -** Use HEX format to send a downlink: [[TTN v3>>Notes 24 -** Use Base64 format to send a downlink: [[Chirpstack>>Notes 25 -** See use note for more serves [[Servers Note>>doc :Main.WebHome]](IoT LoRaWANServer)20 +** Use HEX format to send a downlink: [[TTN v3>>url:https://wiki.dragino.com/index.php/Notes_for_TTN#Send_Downlink_message]] 21 +** Use Base64 format to send a downlink: [[Chirpstack>>url:https://wiki.dragino.com/index.php/Notes_for_ChirpStack#Downlink]]. 22 +** See use note for more serves [[Servers Note>>url:https://wiki.dragino.com/index.php/Main_Page#Use_Note_for_Server]] 26 26 27 27 = 3. Support End Node and firmware version = 28 28 29 -(% border="1" style="background-color:#ffffcc; color:green; width:966px" %) 30 -|=(% colspan="3" style="width: 963px;" %)((( 31 -Dragino STM32 base hardware Firmware / LoRaWAN stack list 32 -))) 33 -|(% style="width:187px" %)((( 34 -**Model** 35 -)))|(% style="width:330px" %)((( 36 -**Description** 37 -)))|(% style="width:445px" %)((( 38 -**Firmware Version <~-~-> Stack Version** 39 -))) 40 -|(% style="width:187px" %)((( 41 -[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]], 42 -)))|(% style="width:330px" %)((( 43 -Open Source Generic LoRaWAN Sensor Node 44 -)))|(% style="width:445px" %)((( 45 -((( 46 -LSN50 v1.6.0 <~-~-> DR-LWS-003; 47 -))) 48 - 49 -((( 50 -((( 26 +(% style="background-color:#ffffcc; color:green; width:995.222px" %) 27 +|=(% colspan="3" style="width: 992px;" %)Dragino STM32 base hardware Firmware / LoRaWAN stack list 28 +|(% style="width:187px" %)**Model**|(% style="width:349px" %)**Description**|(% style="width:453px" %)**Firmware Version <~-~-> Stack Version** 29 +|(% style="width:187px" %)[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],|(% style="width:349px" %)Open Source Generic LoRaWAN Sensor Node|(% style="width:453px" %)LSN50 v1.6.0 <~-~-> DR-LWS-003;((( 51 51 LSN50 v1.7.0 <~-~-> DR-LWS-005; ~-~-> Support since this version 52 52 ))) 53 -))) 54 -))) 55 -|(% style="width:187px" %)((( 56 -[[LGT92>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/142-lgt-92.html]], 57 -)))|(% style="width:330px" %)((( 58 -LoRaWAN GPS Tracker 59 -)))|(% style="width:445px" %)((( 60 -((( 61 -LGT92 v1.6.3 <~-~-> DR-LWS-003; 62 -))) 63 - 64 -((( 65 -((( 32 +|(% style="width:187px" %)[[LGT92>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/142-lgt-92.html]],|(% style="width:349px" %)LoRaWAN GPS Tracker|(% style="width:453px" %)LGT92 v1.6.3 <~-~-> DR-LWS-003;((( 66 66 LGT92 v1.6.4 <~-~-> DR-LWS-005;~-~-> Support since this version 67 67 ))) 68 -))) 69 -))) 70 -|(% style="width:187px" %)((( 71 -[[LBT1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/165-lbt1.html]], 72 -)))|(% style="width:330px" %)((( 73 -LoRaWAN BLE Indoor Tracker 74 -)))|(% style="width:445px" %)((( 75 -LBT1 v1.0 <~-~-> DR-LWS-005; 76 -))) 77 -|(% style="width:187px" %)((( 78 -[[RS485-LN>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/154-rs485-ln.html]], 79 -)))|(% style="width:330px" %)((( 80 -LoRaWAN RS485 Modbus Converter 81 -)))|(% style="width:445px" %)((( 82 -RS485-LN v1.3 <~-~-> DR-LWS-005; 83 -))) 84 -|(% style="width:187px" %)((( 85 -[[LHT65>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/151-lht65.html]], 86 -)))|(% style="width:330px" %)((( 87 -LoRaWAN Temperature & Humidity Sensor 88 -)))|(% style="width:445px" %)((( 89 -((( 90 -LHT65 v1.7 <~-~-> DR-LWS-003; 91 -))) 92 - 93 -((( 94 -((( 35 +|(% style="width:187px" %)[[LBT1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/165-lbt1.html]],|(% style="width:349px" %)LoRaWAN BLE Indoor Tracker|(% style="width:453px" %)LBT1 v1.0 <~-~-> DR-LWS-005; 36 +|(% style="width:187px" %)[[RS485-LN>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/154-rs485-ln.html]],|(% style="width:349px" %)LoRaWAN RS485 Modbus Converter|(% style="width:453px" %)RS485-LN v1.3 <~-~-> DR-LWS-005; 37 +|(% style="width:187px" %)[[LHT65>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/151-lht65.html]],|(% style="width:349px" %)LoRaWAN Temperature & Humidity Sensor|(% style="width:453px" %)LHT65 v1.7 <~-~-> DR-LWS-003;((( 95 95 LHT65 v1.8.0 <~-~-> DR-LWS-005;~-~-> Support since this version 96 96 ))) 97 -))) 98 -))) 99 99 100 - 101 101 = 4. System Management Commands = 102 102 103 103 == 4.1 Change Uplink Interval == ... ... @@ -109,7 +109,7 @@ 109 109 **AT Command: AT+TDC** 110 110 ))) 111 111 112 -(% border="1"style="background-color:#ffffcc; color:green; width:727.222px" %)52 +(% style="background-color:#ffffcc; color:green; width:727.222px" %) 113 113 |=(% colspan="3" style="width: 724px;" %)AT+TDC 114 114 |(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response** 115 115 |(% style="width:165px" %)AT+TDC=?|(% style="width:227px" %)Show current transmit Interval|(% style="width:329px" %)30000((( ... ... @@ -125,18 +125,13 @@ 125 125 **Downlink Command: 0x01** 126 126 {{/info}} 127 127 128 -((( 129 129 Format: Command Code (0x01) followed by 3 bytes time value. 130 -))) 131 131 132 -((( 133 133 If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01. 134 -))) 135 135 136 136 * **Example 1**: Downlink Payload:** 0100001E** ~/~/ Set Transmit Interval (TDC) = 30 seconds 137 137 * **Example 2**: Downlink Payload:** 0100003C** ~/~/ Set Transmit Interval (TDC) = 60 seconds 138 138 139 - 140 140 == 4.2 Reboot End Node == 141 141 142 142 Feature: Reboot End Node to perform a new OTAA or ABP Join. ... ... @@ -145,7 +145,7 @@ 145 145 **AT Command: ATZ** 146 146 {{/info}} 147 147 148 -(% border=" 1" style="background-color:#ffffcc; color:green; width:727.222px" %)83 +(% border="0" style="background-color:#ffffcc; color:green; width:727.222px" %) 149 149 |=(% colspan="3" %)ATZ: Trig a reset of the MCU 150 150 |**Command Example**|**Function**|**Response** 151 151 |ATZ|Reset MCU|((( ... ... @@ -166,16 +166,10 @@ 166 166 **Downlink Command: 0x04** 167 167 {{/info}} 168 168 169 -((( 170 170 Format: Command Code (0x04) followed by FF. 171 -))) 172 172 173 -((( 174 174 If the downlink payload=**04FF**, the end node will reboot. 175 175 176 - 177 -))) 178 - 179 179 == 4.3 Reset to factory Default == 180 180 181 181 Feature: Reset the parameters to Factory Default, factory default value depends on the firmware settings, the OTAA and ABP keys will reserve after this command. ... ... @@ -184,7 +184,7 @@ 184 184 **AT Command: AT+FDR** 185 185 {{/info}} 186 186 187 -(% border="1"style="background-color:#ffffcc; color:green; width:831.222px" %)116 +(% style="background-color:#ffffcc; color:green; width:831.222px" %) 188 188 |=(% colspan="3" style="width: 828px;" %)Reset to factory default 189 189 |(% style="width:181px" %)**Command Example**|(% style="width:181px" %)**Function**|(% style="width:465px" %)**Response** 190 190 |(% style="width:181px" %)AT+FDR|(% style="width:181px" %)Reset to factory default|(% style="width:465px" %)((( ... ... @@ -205,13 +205,9 @@ 205 205 **Downlink Command: 0x04** 206 206 {{/info}} 207 207 208 -((( 209 209 Format: Command Code (0x04) followed by FE. 210 -))) 211 211 212 -((( 213 213 If the downlink payload=**04FE**, Reset Parameters to Factory Default, Keys Reserve. 214 -))) 215 215 216 216 217 217 == 4.4 Show Firmware Version == ... ... @@ -222,10 +222,10 @@ 222 222 **AT Command: AT+VER** 223 223 {{/info}} 224 224 225 -(% border="1"style="background-color:#ffffcc; color:green; width:586px" %)226 -|=(% colspan="3" style="width: 583px;"%)AT+VER: Image Version and Frequency Band227 -| (% style="width:170px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:113px" %)**Response**228 -| (% style="width:170px" %)AT+VER=?|(% style="width:300px" %)Show Image version and Frequency Band|(% style="width:113px" %)(((150 +(% style="background-color:#ffffcc; color:green" %) 151 +|=(% colspan="3" %)AT+VER: Image Version and Frequency Band 152 +|**Command Example**|**Function**|**Response** 153 +|AT+VER=?|Show Image version and Frequency Band|((( 229 229 1.3 EU868 230 230 231 231 OK ... ... @@ -235,25 +235,17 @@ 235 235 **Downlink Command: 0x26 (Valid in 006 stack)** 236 236 {{/info}} 237 237 238 -((( 239 239 Downlink Format: 0x26 240 -))) 241 241 242 -((( 243 243 Device will reply with firmware version info, device info. frequency band info. detail please check device user manual. Total 5 bytes Example: If device is of firmware version 1.1.0 Upload: xx ~-~- yy ~-~- zz ~-~- 110 total 5 bytes 244 -))) 245 245 246 -((( 247 247 **xx: Software Type:** 248 -))) 249 249 250 250 * 0x00 01: LGT92 Version 251 251 * 0x00 02: LBT1 252 252 * 0x00 03: LSE01/LDDS75/LDDS20/LSPH01/LLMS01/LSNPK01 253 253 254 -((( 255 255 **yy: Frequency Band:** 256 -))) 257 257 258 258 * 0x01: EU868 259 259 * 0x02: US915 ... ... @@ -266,9 +266,7 @@ 266 266 * 0x09: AS923-2 267 267 * 0xa0: AS923-3 268 268 269 -((( 270 270 **zz: Subband** 271 -))) 272 272 273 273 firmware version: v1.1.0 ~-~-> 110 274 274 ... ... @@ -281,7 +281,7 @@ 281 281 **AT Command: AT+CFG** 282 282 {{/info}} 283 283 284 -(% border="1"style="background-color:#ffffcc; color:green; width:599.222px" %)199 +(% style="background-color:#ffffcc; color:green; width:599.222px" %) 285 285 |=(% colspan="3" style="width: 596px;" %)AT+CFG: Print all configurations 286 286 |(% style="width:160px" %)**Command Example**|(% style="width:154px" %)**Function**|(% style="width:280px" %)**Response** 287 287 |(% style="width:160px" %)AT+CFG|(% style="width:154px" %)Show all configures|(% style="width:280px" %)((( ... ... @@ -309,7 +309,7 @@ 309 309 **AT Command: AT+APPEUI** 310 310 {{/info}} 311 311 312 -(% border="1"style="background-color:#ffffcc; color:green; width:686.222px" %)227 +(% style="background-color:#ffffcc; color:green; width:686.222px" %) 313 313 |=(% colspan="3" style="width: 683px;" %)AT+APPEUI 314 314 |(% style="width:305px" %)**Command Example**|(% style="width:186px" %)**Function**|(% style="width:191px" %)**Response** 315 315 |(% style="width:305px" %)AT+APPEUI=?|(% style="width:186px" %)Get the Application EUI|(% style="width:191px" %)00 b3 d5 00 00 00 00 00((( ... ... @@ -317,7 +317,6 @@ 317 317 ))) 318 318 |(% style="width:305px" %)AT+APPEUI=00 b3 d5 7e f0 00 4d 34|(% style="width:186px" %)Set the Application EUI|(% style="width:191px" %)OK 319 319 320 - 321 321 == 5.2 Application Key == 322 322 323 323 Feature: Get or Set the Application Key. ... ... @@ -326,7 +326,7 @@ 326 326 **AT Command: AT+APPKEY** 327 327 {{/info}} 328 328 329 -(% border="1"style="background-color:#ffffcc; color:green; width:976.222px" %)243 +(% style="background-color:#ffffcc; color:green; width:976.222px" %) 330 330 |=(% colspan="3" style="width: 973px;" %)AT+APPKEY 331 331 |(% style="width:441px" %)**Command Example**|(% style="width:180px" %)**Function**|(% style="width:350px" %)**Response** 332 332 |(% style="width:441px" %)AT+APPKEY=?|(% style="width:180px" %)Get the Application Key|(% style="width:350px" %)00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35((( ... ... @@ -338,17 +338,14 @@ 338 338 339 339 Feature: Get or Set the Application Session Key. 340 340 341 -{{info}} 342 -**AT Command: AT+APPSKEY** 343 -{{/info}} 255 +AT Command: AT+APPSKEY 344 344 345 -(% border="1" style="background-color:#ffffcc; color:green; width:1040.22px" %) 346 -|=(% colspan="3" style="width: 1037px;" %)AT+APPSKEY 347 -|(% style="width:451px" %)**Command Example**|(% style="width:231px" %)**Function**|(% style="width:354px" %)**Response** 348 -|(% style="width:451px" %)AT+APPSKEY=?|(% style="width:231px" %)Get the Application Session Key|(% style="width:354px" %)00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2((( 257 +|=(% colspan="3" %)AT+APPSKEY 258 +|**Command Example**|**Function**|**Response** 259 +|AT+APPSKEY=?|Get the Application Session Key|00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2((( 349 349 OK 350 350 ))) 351 -| (% style="width:451px" %)AT+APPSKEY=00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2|(% style="width:231px" %)Set the Application Session Key|(% style="width:354px" %)(While Error in format, return AT_PARAM_ERROR)(((262 +|AT+APPSKEY=00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2|Set the Application Session Key.|(While Error in format, return AT_PARAM_ERROR)((( 352 352 OK 353 353 ))) 354 354 ... ... @@ -356,35 +356,29 @@ 356 356 357 357 Feature: Get or Set the Device Address. 358 358 359 -{{info}} 360 -**AT Command: AT+DADDR** 361 -{{/info}} 270 +AT Command: AT+DADDR 362 362 363 -(% border="1" style="background-color:#ffffcc; color:green; width:795.222px" %) 364 -|=(% colspan="3" style="width: 792px;" %)AT+DADDR 365 -|(% style="width:192px" %)**Command Example**|(% style="width:241px" %)**Function**|(% style="width:359px" %)**Response** 366 -|(% style="width:192px" %)AT+DADDR=?|(% style="width:241px" %)Get the Application Session Key.|(% style="width:359px" %)(While Error in format, return AT_PARAM_ERROR)((( 272 +|=(% colspan="3" %)AT+DADDR 273 +|**Command Example**|**Function**|**Response** 274 +|AT+DADDR=?|Get the Application Session Key.|(While Error in format, return AT_PARAM_ERROR)((( 367 367 A8 40 41 FF 368 368 369 369 OK 370 370 ))) 371 -| (% style="width:192px" %)AT+DADDR=A8 40 41 FF|(% style="width:241px" %)Set the Application Session Key.|(% style="width:359px" %)OK279 +|AT+DADDR=A8 40 41 FF|Set the Application Session Key.|OK 372 372 373 373 == 5.5 Device EUI == 374 374 375 375 Feature: Get or Set the Device EUI. 376 376 377 -{{info}} 378 -**AT Command: AT+DEUI** 379 -{{/info}} 285 +AT Command: AT+DEUI 380 380 381 -(% border="1" style="background-color:#ffffcc; color:green; width:1035.22px" %) 382 -|=(% colspan="3" style="width: 1032px;" %)AT+DEUI 383 -|(% style="width:250px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:634px" %)**Response** 384 -|(% style="width:250px" %)AT+DEUI=?|(% style="width:147px" %)Get the Device EUI.|(% style="width:634px" %)00 44 34 22 33 45 55 55((( 287 +|=(% colspan="3" %)AT+DEUI 288 +|**Command Example**|**Function**|**Response** 289 +|AT+DEUI=?|Get the Device EUI.|00 44 34 22 33 45 55 55((( 385 385 OK 386 386 ))) 387 -| (% style="width:250px" %)AT+DEUI=A8 40 41 FF FF 12 34 56|(% style="width:147px" %)Set the Device EUI.|(% style="width:634px" %)(System will write new value to Device EUI,While Error in format, return AT_PARAM_ERROR)(((292 +|AT+DEUI=A8 40 41 FF FF 12 34 56|Set the Device EUI.|(System will write new value to Device EUI,While Error in format, return AT_PARAM_ERROR)((( 388 388 OK 389 389 ))) 390 390 ... ... @@ -392,38 +392,28 @@ 392 392 393 393 Feature: Get or Set the Network ID.(You can enter this command change only after successful network connection) 394 394 395 -{{info}} 396 -**AT Command: AT+NWKID** 397 -{{/info}} 300 +AT Command: AT+NWKID 398 398 399 -(% border="1" style="background-color:#ffffcc; color:green; width:448.222px" %) 400 -|=(% colspan="3" style="width: 445px;" %)AT+NWKID 401 -|(% style="width:191px" %)**Command Example**|(% style="width:153px" %)**Function**|(% style="width:101px" %)**Response** 402 -|(% style="width:191px" %)AT+NWKID=?|(% style="width:153px" %)Get the Network ID.|(% style="width:101px" %)a8 40 41 ff((( 302 +|=(% colspan="3" %)AT+NWKID 303 +|**Command Example**|**Function**|**Response** 304 +|AT+NWKID=?|Get the Network ID.|a8 40 41 ff((( 403 403 OK 404 404 ))) 405 -| (% style="width:191px" %)AT+NWKID=A8 40 41 FF|(% style="width:153px" %)Set the Network ID.|(% style="width:101px" %)OK307 +|AT+NWKID=A8 40 41 FF|Set the Network ID.|OK 406 406 407 - 408 - 409 409 == 5.7 Network Session Key == 410 410 411 411 Feature: Get or Set the Network Session Key 412 412 413 -{{info}} 414 -**AT Command: AT+NWKSKEY** 415 -{{/info}} 313 +AT Command: AT+NWKSKEY 416 416 417 -(% border="1" style="background-color:#ffffcc; color:green; width:1017.22px" %) 418 -|=(% colspan="3" style="width: 1014px;" %)AT+NWKSKEY 419 -|(% style="width:455px" %)**Command Example**|(% style="width:215px" %)**Function**|(% style="width:343px" %)**Response** 420 -|(% style="width:455px" %)AT+NWKSKEY=?|(% style="width:215px" %)Get the Network Session Key.|(% style="width:343px" %)00 4f 19 25 52 ce 97 09 d7 fa 84 71 db 51 02 92((( 315 +|=(% colspan="3" %)AT+NWKSKEY 316 +|**Command Example**|**Function**|**Response** 317 +|AT+NWKSKEY=?|Get the Network Session Key.|00 4f 19 25 52 ce 97 09 d7 fa 84 71 db 51 02 92((( 421 421 OK 422 422 ))) 423 -| (% style="width:455px" %)AT+NWKSKEY=A8 40 41 FF FF 12 34 56 00 01 02 04 05 06 06 07|(% style="width:215px" %)Set the Network Session Key.|(% style="width:343px" %)OK320 +|AT+NWKSKEY=A8 40 41 FF FF 12 34 56 00 01 02 04 05 06 06 07|Set the Network Session Key.|OK 424 424 425 - 426 - 427 427 = 6. Joining and sending date on LoRaWAN network = 428 428 429 429 == 6.1 Confirm Mode == ... ... @@ -430,18 +430,15 @@ 430 430 431 431 Feature: Get or Set the confirmation mode (0-1). 432 432 433 -{{info}} 434 -**AT Command: AT+CFM** 435 -{{/info}} 328 +AT Command: AT+CFM 436 436 437 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %) 438 -|=(% colspan="3" style="width: 707px;" %)AT+CFM 439 -|(% style="width:155px" %)**Command Example**|(% style="width:205px" %)**Function**|(% style="width:346px" %)**Response** 440 -|(% style="width:155px" %)AT+CFM=?|(% style="width:205px" %)Get the confirmation mode|(% style="width:346px" %)0((( 330 +|=(% colspan="3" %)AT+CFM 331 +|**Command Example**|**Function**|**Response** 332 +|AT+CFM=?|Get the confirmation mode|0((( 441 441 OK 442 442 ))) 443 -| (% style="width:155px" %)AT+CFM=1|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)OK444 -| (% style="width:155px" %)AT+CFM=2|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)While Error in format, return AT_PARAM_ERROR335 +|AT+CFM=1|Set the confirmation mode|OK 336 +|AT+CFM=2|Set the confirmation mode|While Error in format, return AT_PARAM_ERROR 445 445 446 446 Downlink Command: 0x05 447 447 ... ... @@ -452,132 +452,100 @@ 452 452 * Example 1: Downlink Payload: 0501 ~/~/ Set AT+CFM=1 453 453 * Example 2: Downlink Payload: 0500 ~/~/ Set AT+CFM=0 454 454 455 - 456 - 457 457 == 6.2 Confirm Status == 458 458 459 459 Feature: Get confirmation status of the last AT+SEND (0-1). 460 460 461 -{{info}} 462 -**AT Command: AT+CFS** 463 -{{/info}} 351 +AT Command: AT+CFS 464 464 465 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %) 466 -|=(% colspan="3" style="width: 531px;" %)AT+CFS 467 -|(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:178px" %)**Response** 468 -|(% style="width:156px" %)AT+CFS=?|(% style="width:193px" %)Get confirmation status|(% style="width:178px" %)0((( 353 +|=(% colspan="3" %)AT+CFS 354 +|**Command Example**|**Function**|**Response** 355 +|AT+CFS=?|Get confirmation status|0((( 469 469 OK 470 470 ))) 471 471 472 - 473 - 474 474 == 6.3 Join LoRa® Network == 475 475 476 476 Feature: Join network. 477 477 478 -{{info}} 479 -**AT Command: AT+JOIN** 480 -{{/info}} 363 +AT Command: AT+JOIN 481 481 482 -(% border="1" style="background-color:#ffffcc; color:green; width:647.222px" %) 483 -|=(% colspan="3" style="width: 644px;" %)AT+JOIN 484 -|(% style="width:163px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:334px" %)**Response** 485 -|(% style="width:163px" %)AT+JOIN ?|(% style="width:147px" %)Get imformation.|(% style="width:334px" %)AT+JOIN: Join network((( 365 +|=(% colspan="3" %)AT+JOIN 366 +|**Command Example**|**Function**|**Response** 367 +|AT+JOIN ?|Get imformation.|AT+JOIN: Join network((( 486 486 OK 487 487 488 488 While Error in format, return AT_BUSY_ERROR 489 489 ))) 490 490 491 - 492 492 == 6.4 LoRa® Network Join Mode == 493 493 494 494 Feature: Get or Set the Network Join Mode. (0: ABP, 1: OTAA). 495 495 496 -{{info}} 497 -**AT Command: AT+NJM** 498 -{{/info}} 377 +AT Command: AT+NJM 499 499 500 -(% border="1" style="background-color:#ffffcc; color:green; width:753.222px" %) 501 -|=(% colspan="3" style="width: 750px;" %)AT+NJM 502 -|(% style="width:162px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:361px" %)**Response** 503 -|(% style="width:162px" %)AT+NJM=?|(% style="width:227px" %)Get the Network Join Mode|(% style="width:361px" %)1((( 379 +|=(% colspan="3" %)AT+NJM 380 +|**Command Example**|**Function**|**Response** 381 +|AT+NJM=?|Get the Network Join Mode|1((( 504 504 OK 505 505 ))) 506 -| (% style="width:162px" %)AT+NJM=0|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)OK507 -| (% style="width:162px" %)AT+NJM=2|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)While Error in format, return AT_PARAM_ERROR384 +|AT+NJM=0|Set the Network Join Mode|OK 385 +|AT+NJM=2|Set the Network Join Mode|While Error in format, return AT_PARAM_ERROR 508 508 509 -{{info}} 510 -**Downlink Command: 0x20** 511 -{{/info}} 387 +Downlink Command: 0x20 512 512 513 513 Format: Command Code (0x20) followed by 1 bytes mode value. 514 514 515 515 If the downlink payload=2000, it means set the Network Join Mode, while type code is 20. 516 516 517 -* **Example 1:**Downlink Payload:**2000**~/~/ Set AT+NJM=O518 -* **Example 2:**Downlink Payload:**2001**~/~/ Set AT+NJM=1393 +* Example 1: Downlink Payload: 2000 ~/~/ Set AT+NJM=O 394 +* Example 2: Downlink Payload: 2001 ~/~/ Set AT+NJM=1 519 519 520 - 521 521 == 6.5 LoRa® Network Join Status == 522 522 523 523 Feature: LoRa® Network Join Status. 524 524 525 -{{info}} 526 -**AT Command: AT+NJS** 527 -{{/info}} 400 +AT Command: AT+NJS 528 528 529 -(% border="1" style="background-color:#ffffcc; color:green; width:498.222px" %) 530 -|=(% colspan="3" style="width: 495px;" %)AT+NJS 531 -|(% style="width:169px" %)**Command Example**|(% style="width:164px" %)**Function**|(% style="width:161px" %)**Response** 532 -|(% style="width:169px" %)AT+NJS=?|(% style="width:164px" %)Get the join status.|(% style="width:161px" %)0((( 402 +|=(% colspan="3" %)AT+NJS 403 +|**Command Example**|**Function**|**Response** 404 +|AT+NJS=?|Get the join status.|0((( 533 533 OK 534 534 ))) 535 535 536 - 537 537 == 6.6 Print Last Received Data in Raw Format == 538 538 539 539 Feature: Print Last Received Data in Raw Format<port:data>. 540 540 541 -{{info}} 542 -**AT Command: AT+RECV** 543 -{{/info}} 412 +AT Command: AT+RECV 544 544 545 -(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %) 546 -|=(% colspan="3" style="width: 584px;" %)AT+RECV 547 -|(% style="width:161px" %)**Command Example**|(% style="width:272px" %)**Function**|(% style="width:150px" %)**Response** 548 -|(% style="width:161px" %)AT+RECV=?|(% style="width:272px" %)print last received data in raw format.|(% style="width:150px" %)0:((( 414 +|=(% colspan="3" %)AT+RECV 415 +|**Command Example**|**Function**|**Response** 416 +|AT+RECV=?|print last received data in raw format.|0:((( 549 549 OK 550 550 ))) 551 551 552 - 553 553 == 6.7 Print Last Received Data in Binary Format == 554 554 555 555 Feature: Print Last Received Data in Binary Format<port:data>. 556 556 557 -{{info}} 558 -**AT Command: AT+RECVB** 559 -{{/info}} 424 +AT Command: AT+RECVB 560 560 561 -(% border="1" style="background-color:#ffffcc; color:green; width:793.222px" %) 562 -|=(% colspan="3" style="width: 790px;" %)AT+RECVB 563 -|(% style="width:173px" %)**Command Example**|(% style="width:497px" %)**Function**|(% style="width:120px" %)**Response** 564 -|(% style="width:173px" %)AT+RECVB=?|(% style="width:497px" %)print last received data in binary format (with hexadecimal values).|(% style="width:120px" %)2: 0010((( 426 +|=(% colspan="3" %)AT+RECVB 427 +|**Command Example**|**Function**|**Response** 428 +|AT+RECVB=?|print last received data in binary format (with hexadecimal values).|2: 0010((( 565 565 OK 566 566 ))) 567 567 568 - 569 569 == 6.8 Send Text Data == 570 570 571 571 Feature: Send Text Data<port:data>. 572 572 573 -{{info}} 574 -**AT Command: AT+SEND** 575 -{{/info}} 436 +AT Command: AT+SEND 576 576 577 -(% border="1" style="background-color:#ffffcc; color:green; width:991.222px" %) 578 -|=(% colspan="3" style="width: 988px;" %)AT+SEND 579 -|(% style="width:201px" %)**Command Example**|(% style="width:340px" %)**Function**|(% style="width:446px" %)**Response** 580 -|(% style="width:201px" %)AT+SEND=12:hello world|(% style="width:340px" %)Send text data along with the application port.|(% style="width:446px" %)OK((( 438 +|=(% colspan="3" %)AT+SEND 439 +|**Command Example**|**Function**|**Response** 440 +|AT+SEND=12:hello world|Send text data along with the application port.|OK((( 581 581 While Error in format, return 582 582 583 583 AT_BUSY_ERROR/AT_BUSY_ERROR/AT_NO_NETWORK_JOINED ... ... @@ -585,26 +585,21 @@ 585 585 586 586 ))) 587 587 588 - 589 589 == 6.9 Send Hexadecimal Data == 590 590 591 591 Feature: Send hexadecimal data along with the application port. 592 592 593 -{{info}} 594 -**AT Command: AT+SENDB** 595 -{{/info}} 452 +AT Command: AT+SENDB 596 596 597 -(% border="1" style="background-color:#ffffcc; color:green; width:1120.22px" %) 598 -|=(% colspan="3" style="width: 1117px;" %)AT+SENDB 599 -|(% style="width:257px" %)**Command Example**|(% style="width:406px" %)**Function**|(% style="width:453px" %)**Response** 600 -|(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)OK 601 -|(% style="width:257px" %)AT+SENDB=abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)While Error in format, return((( 454 +|=(% colspan="3" %)AT+SENDB 455 +|**Command Example**|**Function**|**Response** 456 +|AT+SENDB=12:abcdef0123456789|Send hexadecimal data along with the application port.|OK 457 +|AT+SENDB=abcdef0123456789|Send hexadecimal data along with the application port.|While Error in format, return((( 602 602 AT_PARAM_ERROR AT_BUSY_ERROR/AT_NO_NETWORK_JOINED 603 603 604 604 605 605 ))) 606 606 607 - 608 608 = 7. LoRaWAN network management = 609 609 610 610 == 7.1 Adaptive Data Rate == ... ... @@ -611,289 +611,231 @@ 611 611 612 612 Feature: Get or Set the Adaptive Data Rate setting. (0: off, 1: on). 613 613 614 -{{info}} 615 -**AT Command: AT+ADR** 616 -{{/info}} 617 617 618 -(% border="1" style="background-color:#ffffcc; color:green; width:683.222px" %) 619 -|=(% colspan="3" style="width: 680px;" %)AT+ADR 620 -|(% style="width:162px" %)**Command Example**|(% style="width:266px" %)**Function**|(% style="width:250px" %)**Response** 621 -|(% style="width:162px" %)AT+ADR=?|(% style="width:266px" %)Get the Adaptive Data Rate setting.|(% style="width:250px" %)1((( 470 +AT Command: AT+ADR 471 + 472 +|=(% colspan="3" %)AT+ADR 473 +|**Command Example**|**Function**|**Response** 474 +|AT+ADR=?|Get the Adaptive Data Rate setting.|1((( 622 622 OK 623 623 ))) 624 -| (% style="width:162px" %)AT+ADR=0|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:250px" %)OK625 -| (% style="width:162px" %)AT+ADR=2|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:250px" %)While Error in format, return(((477 +|AT+ADR=0|Set the Adaptive Data Rate setting.|OK 478 +|AT+ADR=2|Set the Adaptive Data Rate setting.|While Error in format, return((( 626 626 AT_PARAM_ERROR 627 627 ))) 628 628 629 -{{info}} 630 -**Downlink Command: 0x22** 631 -{{/info}} 482 +Downlink Command: 0x22 632 632 633 633 634 634 If the downlink payload=2201, it means setting the adaptive data rate to 1, while type code is 22. 635 635 636 -* **Example 1**: Downlink Payload:**2201**~/~/ Set AT+ADR=1.637 -* **Example 2**: Downlink Payload:**2200FFFF**~/~/ Set AT+ADR=0.487 +* Example 1: Downlink Payload: 2201 ~/~/ Set AT+ADR=1. 488 +* Example 2: Downlink Payload: 2200FFFF ~/~/ Set AT+ADR=0. 638 638 639 - 640 640 == 7.2 LoRa® Class == 641 641 642 642 Feature: Get or Set the Device Class(Currently only support class A, class C). 643 643 644 -{{info}} 645 -**AT Command:AT+CLASS** 646 -{{/info}} 494 +AT Command:AT+CLASS 647 647 648 -(% border="1" style="background-color:#ffffcc; color:green; width:507.222px" %) 649 -|=(% colspan="3" style="width: 504px;" %)AT+CLASS 650 -|(% style="width:163px" %)**Command Example**|(% style="width:166px" %)**Function**|(% style="width:175px" %)**Response** 651 -|(% style="width:163px" %)AT+CLASS=?|(% style="width:166px" %)Get the Device Class.|(% style="width:175px" %)A((( 496 +|=(% colspan="3" %)AT+CLASS 497 +|**Command Example**|**Function**|**Response** 498 +|AT+CLASS=?|Get the Device Class.|A((( 652 652 OK 653 653 ))) 654 -| (% style="width:163px" %)AT+CLASS=C|(% style="width:166px" %)Set the Device Class.|(% style="width:175px" %)OK(((501 +|AT+CLASS=C|Set the Device Class.|OK((( 655 655 656 656 ))) 657 657 658 - 659 659 == 7.3 Duty Cycle Setting == 660 660 661 661 Feature: Get or Set the ETSI Duty Cycle setting - 0=disable, 1=enable - Only for testing. 662 662 663 -{{info}} 664 -**AT Command:AT+DCS** 665 -{{/info}} 509 +AT Command:AT+DCS 666 666 667 -(% border="1" style="background-color:#ffffcc; color:green; width:515.222px" %) 668 -|=(% colspan="3" style="width: 512px;" %)AT+DCS 669 -|(% style="width:165px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:107px" %)**Response** 670 -|(% style="width:165px" %)AT+DCS=?|(% style="width:239px" %)Get the ETSI Duty Cycle setting.|(% style="width:107px" %)1((( 511 +|=(% colspan="3" %)AT+DCS 512 +|**Command Example**|**Function**|**Response** 513 +|AT+DCS=?|Get the ETSI Duty Cycle setting.|1((( 671 671 OK 672 672 ))) 673 -| (% style="width:165px" %)AT+DCS=1|(% style="width:239px" %)Set the ETSI Duty Cycle setting.|(% style="width:107px" %)OK(((516 +|AT+DCS=1|Set the ETSI Duty Cycle setting.|OK((( 674 674 675 675 ))) 676 676 677 - 678 678 == 7.4 Data Rate == 679 679 680 680 Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) . Note: while set Data Rate, please use set Adptive Data Rate, ADR=0 first. otherwise device will response to server's ADR command and change the DR to the setting from server 681 681 682 -{{info}} 683 -**AT Command: AT+DR** 684 -{{/info}} 524 +AT Command: AT+DR 685 685 686 -(% border="1" style="background-color:#ffffcc; color:green; width:466.222px" %) 687 -|=(% colspan="3" style="width: 463px;" %)AT+DR 688 -|(% style="width:156px" %)**Command Example**|(% style="width:167px" %)**Function**|(% style="width:140px" %)**Response** 689 -|(% style="width:156px" %)AT+DR=?|(% style="width:167px" %)Get the Data Rate.|(% style="width:140px" %)5((( 526 +|=(% colspan="3" %)AT+DR 527 +|**Command Example**|**Function**|**Response** 528 +|AT+DR=?|Get the Data Rate.|5((( 690 690 OK 691 691 ))) 692 -| (% style="width:156px" %)AT+DR=2|(% style="width:167px" %)Set the Data Rate.|(% style="width:140px" %)OK(((531 +|AT+DR=2|Set the Data Rate.|OK((( 693 693 694 694 ))) 695 695 696 -{{info}} 697 -**Downlink Command: 0x2200aaFF** 698 -{{/info}} 535 +Downlink Command: 0x2200aaFF 699 699 700 700 701 701 If the downlink payload=220001FF, it means setting the data rate to 1, while type code is 22 00 aa FF. 702 702 703 -* **Example 1**: Downlink Payload:**220001FF**~/~/ Set AT+DR=1.704 -* **Example 2**: Downlink Payload:**220000FF**~/~/ Set AT+DR=0.540 +* Example 1: Downlink Payload: 220001FF ~/~/ Set AT+DR=1. 541 +* Example 2: Downlink Payload: 220000FF ~/~/ Set AT+DR=0. 705 705 706 - 707 707 == 7.5 Frame Counter Downlink == 708 708 709 709 Feature: Get or Set the Frame Counter Downlink. 710 710 711 -{{info}} 712 -**AT Command:AT+FCD** 713 -{{/info}} 547 +AT Command:AT+FCD 714 714 715 -(% border="1" style="background-color:#ffffcc; color:green; width:693.222px" %) 716 -|=(% colspan="3" style="width: 690px;" %)AT+FCD 717 -|(% style="width:162px" %)**Command Example**|(% style="width:258px" %)**Function**|(% style="width:269px" %)**Response** 718 -|(% style="width:162px" %)AT+FCD=?|(% style="width:258px" %)Get the Frame Counter Downlink.|(% style="width:269px" %)0((( 549 +|=(% colspan="3" %)AT+FCD 550 +|**Command Example**|**Function**|**Response** 551 +|AT+FCD=?|Get the Frame Counter Downlink.|0((( 719 719 OK 720 720 ))) 721 -| (% style="width:162px" %)AT+FCD=10|(% style="width:258px" %)Set the Frame Counter Downlink.|(% style="width:269px" %)(System will write new value to FCD)(((554 +|AT+FCD=10|Set the Frame Counter Downlink.|(System will write new value to FCD)((( 722 722 OK 723 723 724 724 725 725 ))) 726 726 727 - 728 728 == 7.6 Frame Counter Uplink == 729 729 730 730 Feature: Get or Set the Frame Counter Uplink. 731 731 732 -{{info}} 733 -**AT Command:AT+FCU** 734 -{{/info}} 564 +AT Command:AT+FCU 735 735 736 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %) 737 -|=(% colspan="3" style="width: 531px;" %)AT+FCU 738 -|(% style="width:177px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:113px" %)**Response** 739 -|(% style="width:177px" %)AT+FCU=?|(% style="width:239px" %)Get the Frame Counter Uplink.|(% style="width:113px" %)0((( 566 +|=(% colspan="3" %)AT+FCU 567 +|**Command Example**|**Function**|**Response** 568 +|AT+FCU=?|Get the Frame Counter Uplink.|0((( 740 740 OK 741 741 ))) 742 -| (% style="width:177px" %)AT+FCU=10|(% style="width:239px" %)Set the Frame Counter Uplink.|(% style="width:113px" %)OK(((571 +|AT+FCU=10|Set the Frame Counter Uplink.|OK((( 743 743 744 744 ))) 745 745 746 - 747 747 == 7.7 Join Accept Delay1 == 748 748 749 749 Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 1 in ms. 750 750 751 -{{info}} 752 -**AT Command:AT+JN1DL** 753 -{{/info}} 579 +AT Command:AT+JN1DL 754 754 755 -(% border="1" style="background-color:#ffffcc; color:green; width:537.222px" %) 756 -|=(% colspan="3" style="width: 534px;" %)AT+JN1DL 757 -|(% style="width:164px" %)**Command Example**|(% style="width:229px" %)**Function**|(% style="width:140px" %)**Response** 758 -|(% style="width:164px" %)AT+JN1DL=?|(% style="width:229px" %)Get the Join Accept Delay.|(% style="width:140px" %)5000((( 581 +|=(% colspan="3" %)AT+JN1DL 582 +|**Command Example**|**Function**|**Response** 583 +|AT+JN1DL=?|Get the Join Accept Delay.|5000((( 759 759 OK 760 760 ))) 761 -| (% style="width:164px" %)AT+JN1DL=10000|(% style="width:229px" %)Set the Join Accept Delay.|(% style="width:140px" %)OK(((586 +|AT+JN1DL=10000|Set the Join Accept Delay.|OK((( 762 762 763 763 ))) 764 764 765 - 766 766 == 7.8 Join Accept Delay2 == 767 767 768 768 Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 2 in ms. 769 769 770 -{{info}} 771 -**AT Command:AT+JN2DL** 772 -{{/info}} 594 +AT Command:AT+JN2DL 773 773 774 -(% border="1" style="background-color:#ffffcc; color:green; width:538.222px" %) 775 -|=(% colspan="3" style="width: 535px;" %)AT+JN2DL 776 -|(% style="width:160px" %)**Command Example**|(% style="width:228px" %)**Function**|(% style="width:146px" %)**Response** 777 -|(% style="width:160px" %)AT+JN2DL=?|(% style="width:228px" %)Get the Join Accept Delay.|(% style="width:146px" %)6000((( 596 +|=(% colspan="3" %)AT+JN2DL 597 +|**Command Example**|**Function**|**Response** 598 +|AT+JN2DL=?|Get the Join Accept Delay.|6000((( 778 778 OK 779 779 ))) 780 -| (% style="width:160px" %)AT+JN2DL=20000|(% style="width:228px" %)Set the Join Accept Delay.|(% style="width:146px" %)OK(((601 +|AT+JN2DL=20000|Set the Join Accept Delay.|OK((( 781 781 782 782 ))) 783 783 784 - 785 785 == 7.9 Public Network Mode == 786 786 787 787 Feature: Get or Set the public network mode. (0: off, 1: on) 788 788 789 -{{info}} 790 -**AT Command:AT+PNM** 791 -{{/info}} 609 +AT Command:AT+PNM 792 792 793 -(% border="1" style="background-color:#ffffcc; color:green; width:667.222px" %) 794 -|=(% colspan="3" style="width: 664px;" %)AT+PNM 795 -|(% style="width:166px" %)**Command Example**|(% style="width:225px" %)**Function**|(% style="width:272px" %)**Response** 796 -|(% style="width:166px" %)AT+PNM=?|(% style="width:225px" %)Get the public network mode.|(% style="width:272px" %)1((( 611 +|=(% colspan="3" %)AT+PNM 612 +|**Command Example**|**Function**|**Response** 613 +|AT+PNM=?|Get the public network mode.|1((( 797 797 OK 798 798 ))) 799 -| (% style="width:166px" %)AT+PNM=1|(% style="width:225px" %)Set the public network mode.|(% style="width:272px" %)(System will write new value to PNM)(((616 +|AT+PNM=1|Set the public network mode.|(System will write new value to PNM)((( 800 800 OK 801 801 802 802 803 803 ))) 804 804 805 - 806 806 == 7.10 Receive Delay1 == 807 807 808 808 Feature: Get or Set the delay between the end of the Tx and the Rx Window 1 in ms 809 809 810 -{{info}} 811 -**AT Command:AT+RX1DL** 812 -{{/info}} 626 +AT Command:AT+RX1DL 813 813 814 -(% border="1" style="background-color:#ffffcc; color:green; width:408.222px" %) 815 -|=(% colspan="3" style="width: 405px;" %)AT+RX1DL 816 -|(% style="width:155px" %)**Command Example**|(% style="width:128px" %)**Function**|(% style="width:122px" %)**Response** 817 -|(% style="width:155px" %)AT+RX1DL=?|(% style="width:128px" %)Get the delay.|(% style="width:122px" %)1000((( 628 +|=(% colspan="3" %)AT+RX1DL 629 +|**Command Example**|**Function**|**Response** 630 +|AT+RX1DL=?|Get the delay.|1000((( 818 818 OK 819 819 ))) 820 -| (% style="width:155px" %)AT+RX1DL=1500|(% style="width:128px" %)Set the delay.|(% style="width:122px" %)OK(((633 +|AT+RX1DL=1500|Set the delay.|OK((( 821 821 822 822 ))) 823 823 637 +== 7.11Receive Delay2 == 824 824 825 -== 7.11 Receive Delay2 == 826 - 827 827 Feature: Get or Set the delay between the end of the Tx and the Rx Window 2 in ms 828 828 829 -{{info}} 830 -**AT Command:AT+RX2DL** 831 -{{/info}} 641 +AT Command:AT+RX2DL 832 832 833 -(% border="1" style="background-color:#ffffcc; color:green; width:481.222px" %) 834 -|=(% colspan="3" style="width: 478px;" %)AT+RX2DL 835 -|(% style="width:175px" %)**Command Example**|(% style="width:152px" %)**Function**|(% style="width:150px" %)**Response** 836 -|(% style="width:175px" %)AT+RX2DL=?|(% style="width:152px" %)Get the delay.|(% style="width:150px" %)2000((( 643 +|=(% colspan="3" %)AT+RX2DL 644 +|**Command Example**|**Function**|**Response** 645 +|AT+RX2DL=?|Get the delay.|2000((( 837 837 OK 838 838 ))) 839 -| (% style="width:175px" %)AT+RX2DL=2500|(% style="width:152px" %)Set the delay.|(% style="width:150px" %)OK(((648 +|AT+RX2DL=2500|Set the delay.|OK((( 840 840 841 841 ))) 842 842 843 - 844 844 == 7.12 Rx2 Window Data Rate == 845 845 846 846 Feature: Get or Set the Rx2 window data rate (0-7 corresponding to DR_X) 847 847 848 -{{info}} 849 -**AT Command:AT+RX2DR** 850 -{{/info}} 656 +AT Command:AT+RX2DR 851 851 852 -(% border="1" style="background-color:#ffffcc; color:green; width:525.222px" %) 853 -|=(% colspan="3" style="width: 522px;" %)AT+RX2DR 854 -|(% style="width:160px" %)**Command Example**|(% style="width:232px" %)**Function**|(% style="width:130px" %)**Response** 855 -|(% style="width:160px" %)AT+RX2DR=?|(% style="width:232px" %)Get the Rx2 window data rate.|(% style="width:130px" %)2((( 658 +|=(% colspan="3" %)AT+RX2DR 659 +|**Command Example**|**Function**|**Response** 660 +|AT+RX2DR=?|Get the Rx2 window data rate.|2((( 856 856 OK 857 857 ))) 858 -| (% style="width:160px" %)AT+RX2DR=6|(% style="width:232px" %)Set the Rx2 window data rate.|(% style="width:130px" %)OK(((663 +|AT+RX2DR=6|Set the Rx2 window data rate.|OK((( 859 859 860 860 ))) 861 861 862 - 863 863 == 7.13 Rx2 Window Frequency == 864 864 865 865 Feature: Get or Set the Rx2 window frequency 866 866 867 -{{info}} 868 -**AT Command:AT+RX2FQ** 869 -{{/info}} 671 +AT Command:AT+RX2FQ 870 870 871 -(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %) 872 -|=(% colspan="3" style="width: 584px;" %)AT+RX2FQ 873 -|(% style="width:183px" %)**Command Example**|(% style="width:240px" %)**Function**|(% style="width:160px" %)**Response** 874 -|(% style="width:183px" %)AT+RX2FQ=?|(% style="width:240px" %)Get the Rx2 window frequency.|(% style="width:160px" %)434665000((( 673 +|=(% colspan="3" %)AT+RX2FQ 674 +|**Command Example**|**Function**|**Response** 675 +|AT+RX2FQ=?|Get the Rx2 window frequency.|434665000((( 875 875 OK 876 876 ))) 877 -| (% style="width:183px" %)AT+RX2FQ=434665000|(% style="width:240px" %)Set the Rx2 window frequency.|(% style="width:160px" %)OK(((678 +|AT+RX2FQ=434665000|Set the Rx2 window frequency.|OK((( 878 878 879 879 ))) 880 880 881 - 882 882 == 7.14 Transmit Power == 883 883 884 884 Feature: Get or Set the Transmit Power(0-5, MAX:0, MIN:5, according to LoRaWAN Spec, or 40=10dB, 41 = 11dB, …, 50 = 20dB which is out of LoRaWAN spec. ) 885 885 886 -{{info}} 887 -**AT Command:AT+TXP** 888 -{{/info}} 686 +AT Command:AT+TXP 889 889 890 -(% border="1" style="background-color:#ffffcc; color:green; width:465.222px" %) 891 -|=(% colspan="3" style="width: 462px;" %)AT+TXP 892 -|(% style="width:161px" %)**Command Example**|(% style="width:189px" %)**Function**|(% style="width:112px" %)**Response** 893 -|(% style="width:161px" %)AT+TXP=?|(% style="width:189px" %)Get the Transmit Power.|(% style="width:112px" %)0((( 688 +|=(% colspan="3" %)AT+TXP 689 +|**Command Example**|**Function**|**Response** 690 +|AT+TXP=?|Get the Transmit Power.|0((( 894 894 OK 895 895 ))) 896 -| (% style="width:161px" %)AT+TXP=1|(% style="width:189px" %)Set the Transmit Power.|(% style="width:112px" %)OK(((693 +|AT+TXP=1|Set the Transmit Power.|OK((( 897 897 898 898 ))) 899 899 ... ... @@ -901,190 +901,146 @@ 901 901 902 902 If the downlink payload=22000100, it means setting the TXP to 0. 903 903 904 -* **Example 1**: Downlink Payload:**22000102**~/~/ Set AT+TXP=2.905 -* **Example 2**: Downlink Payload:**220000FF**~/~/ Set AT+TXP=0.701 +* Example 1: Downlink Payload: 22000102 ~/~/ Set AT+TXP=2. 702 +* Example 2: Downlink Payload: 220000FF ~/~/ Set AT+TXP=0. 906 906 907 - 908 908 == 7.15 RSSI of the Last Received Packet == 909 909 910 910 Feature: Get or Set the Rx2 window frequency 911 911 912 -{{info}} 913 -**AT Command:AT+RSSI** 914 -{{/info}} 708 +AT Command:AT+RSSI 915 915 916 -(% border="1" style="background-color:#ffffcc; color:green; width:557.222px" %) 917 -|=(% colspan="3" style="width: 554px;" %)AT+RSSI 918 -|(% style="width:164px" %)**Command Example**|(% style="width:289px" %)**Function**|(% style="width:100px" %)**Response** 919 -|(% style="width:164px" %)AT+RSSI=?|(% style="width:289px" %)Get the RSSI of the last received packet.|(% style="width:100px" %)0((( 710 +|=(% colspan="3" %)AT+RSSI 711 +|**Command Example**|**Function**|**Response** 712 +|AT+RSSI=?|Get the RSSI of the last received packet.|0((( 920 920 OK 921 921 ))) 922 922 923 - 924 924 == 7.16 SNR of the Last Received Packet == 925 925 926 926 Feature: Get the SNR of the last received packet 927 927 928 -{{info}} 929 -**AT Command:AT+SNR** 930 -{{/info}} 720 +AT Command:AT+SNR 931 931 932 -(% border="1" style="background-color:#ffffcc; color:green; width:571.222px" %) 933 -|=(% colspan="3" style="width: 568px;" %)AT+SNR 934 -|(% style="width:164px" %)**Command Example**|(% style="width:290px" %)**Function**|(% style="width:113px" %)**Response** 935 -|(% style="width:164px" %)AT+SNR=?|(% style="width:290px" %)Get the RSSI of the last received packet.|(% style="width:113px" %)0((( 722 +|=(% colspan="3" %)AT+SNR 723 +|**Command Example**|**Function**|**Response** 724 +|AT+SNR=?|Get the RSSI of the last received packet.|0((( 936 936 OK 937 937 ))) 938 938 939 - 940 940 == 7.17 Application Port == 941 941 942 942 Feature: Get or set the application port. 943 943 944 -{{info}} 945 -**AT Command: AT+PORT** 946 -{{/info}} 732 +AT Command: AT+PORT 947 947 948 -(% border="1" style="background-color:#ffffcc; color:green; width:500.222px" %) 949 -|=(% colspan="3" style="width: 497px;" %)AT+PORT 950 -|(% style="width:157px" %)**Command Example**|(% style="width:204px" %)**Function**|(% style="width:135px" %)**Response** 951 -|(% style="width:157px" %)AT+PORT=?|(% style="width:204px" %)Get the application port|(% style="width:135px" %)21((( 734 +|=(% colspan="3" %)AT+PORT 735 +|**Command Example**|**Function**|**Response** 736 +|AT+PORT=?|Get the application port|21((( 952 952 OK 953 953 ))) 954 -| (% style="width:157px" %)AT+PORT=21|(% style="width:204px" %)Set the application port|(% style="width:135px" %)OK739 +|AT+PORT=21|Set the application port|OK 955 955 956 -{{info}} 957 -**Downlink Command: 0x23** 958 -{{/info}} 741 +Downlink Command: 0x23 959 959 960 960 Format: Command Code (0x23) followed by 1 bytes port value. 961 961 962 962 If the downlink payload=2301, it means set the application port to 1, while type code is 23. 963 963 964 -* **Example 1**: Downlink Payload:**2301**~/~/ set the application port to 1965 -* **Example 2**: Downlink Payload:**2305**~/~/ set the application port to 5747 +* Example 1: Downlink Payload: 2301 ~/~/ set the application port to 1 748 +* Example 2: Downlink Payload: 2305 ~/~/ set the application port to 5 966 966 967 - 968 968 == 7.18 Single Channel Mode == 969 969 970 970 Feature:Get or Set Frequency (Unit: Hz) for Single Channel Mode. 971 971 972 -{{info}} 973 -**AT Command: AT+CHS** 974 -{{/info}} 754 +AT Command: AT+CHS 975 975 976 -(% border="1" style="background-color:#ffffcc; color:green; width:603.222px" %) 977 -|=(% colspan="3" style="width: 600px;" %)AT+CHS 978 -|(% style="width:182px" %)**Command Example**|(% style="width:295px" %)**Function**|(% style="width:122px" %)**Response** 979 -|(% style="width:182px" %)AT+CHS=?|(% style="width:295px" %)Get Frequency for Single Channel Mode|(% style="width:122px" %)0((( 756 +|=(% colspan="3" %)AT+CHS 757 +|**Command Example**|**Function**|**Response** 758 +|AT+CHS=?|Get Frequency for Single Channel Mode|0((( 980 980 OK 981 981 ))) 982 -| (% style="width:182px" %)AT+CHS=868100000|(% style="width:295px" %)Set Frequency for Single Channel Mode|(% style="width:122px" %)OK761 +|AT+CHS=868100000|Set Frequency for Single Channel Mode|OK 983 983 984 - 985 985 == 7.19 Eight Channel Mode == 986 986 987 987 Feature: Get or Set eight channels mode,Only for US915,AU915,CN470. 988 988 989 -{{info}} 990 -**AT Command: AT+CHE** 991 -{{/info}} 767 +AT Command: AT+CHE 992 992 993 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %) 994 -|=(% colspan="3" style="width: 707px;" %)AT+CHE 995 -|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response** 996 -|(% style="width:160px" %)AT+CHE=?|(% style="width:198px" %)Get eight channels mode|(% style="width:349px" %)1((( 769 +|=(% colspan="3" %)AT+CHE 770 +|**Command Example**|**Function**|**Response** 771 +|AT+CHE=?|Get eight channels mode|1((( 997 997 902.3 902.5 902.7 902.9 903.1 903.3 903.5 903.7 998 998 999 999 OK 1000 1000 ))) 1001 -| (% style="width:160px" %)AT+CHE=1|(% style="width:198px" %)Set eight channels mode|(% style="width:349px" %)OK776 +|AT+CHE=1|Set eight channels mode|OK 1002 1002 1003 -{{info}} 1004 -**Downlink Command: 0x24** 1005 -{{/info}} 778 +Downlink Command: 0x24 1006 1006 1007 1007 Format: Command Code (0x24) followed by 1 bytes channel value. 1008 1008 1009 1009 If the downlink payload=2401, it means set channel mode to 1, while type code is 24. 1010 1010 1011 -* **Example 1**: Downlink Payload: 2401 ~/~/ set channel mode to 11012 -* **Example 2**: Downlink Payload: 2405 ~/~/ set channel mode to 5784 +* Example 1: Downlink Payload: 2401 ~/~/ set channel mode to 1 785 +* Example 2: Downlink Payload: 2405 ~/~/ set channel mode to 5 1013 1013 1014 - 1015 1015 == 7.20 Get or Set RXwindows1 timeout == 1016 1016 1017 1017 Feature:Get or Set the number of symbols to detect and timeout from RXwindow1(0 to 255). 1018 1018 1019 -{{info}} 1020 -**AT Command: AT+RX1WTO** 1021 -{{/info}} 791 +AT Command: AT+RX1WTO 1022 1022 1023 -(% border="1" style="background-color:#ffffcc; color:green; width:460.222px" %) 1024 -|=(% colspan="3" style="width: 457px;" %)AT+ RX1WTO 1025 -|(% style="width:163px" %)**Command Example**|(% style="width:201px" %)**Function**|(% style="width:93px" %)**Response** 1026 -|(% style="width:163px" %)AT+RX1WTO=?|(% style="width:201px" %)Get RXwindows1 timeout|(% style="width:93px" %)14((( 793 +|=(% colspan="3" %)AT+ RX1WTO 794 +|**Command Example**|**Function**|**Response** 795 +|AT+RX1WTO=?|Get RXwindows1 timeout|14((( 1027 1027 OK 1028 1028 ))) 1029 -| (% style="width:163px" %)AT+RX1WTO=60|(% style="width:201px" %)Set RXwindows1 timeout|(% style="width:93px" %)OK798 +|AT+RX1WTO=60|Set RXwindows1 timeout|OK 1030 1030 1031 -((( 1032 -**AT+RX1TWO** is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph. 1033 -))) 800 +AT+RX1TWO is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph. 1034 1034 1035 -[[image:image -20220526162535-1.png]]802 +[[~[~[image:https://wiki.dragino.com/images/thumb/5/51/RX1WTO.JPG/600px-RX1WTO.JPG~|~|alt="RX1WTO.JPG" height="239" width="600"~]~]>>url:https://wiki.dragino.com/index.php/File:RX1WTO.JPG]] 1036 1036 1037 -((( 1038 1038 Increasing thisvalue is equal to extending the time that the receiving window is opened, butthe corresponding power consumption will also increase. Properly increasingthis value can increase the success rate of the downlink. 1039 1039 1040 - 1041 -))) 1042 - 1043 1043 == 7.21 Get or Set RXwindows2 timeout == 1044 1044 1045 1045 Feature:Get or Set the number of symbols to detect and timeout from RXwindow2(0 to 255). 1046 1046 1047 -{{info}} 1048 -**AT Command: AT+RX2WTO** 1049 -{{/info}} 810 +AT Command: AT+RX2WTO 1050 1050 1051 -(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %) 1052 -|=(% colspan="3" style="width: 494px;" %)AT+ RX2WTO 1053 -|(% style="width:190px" %)**Command Example**|(% style="width:199px" %)**Function**|(% style="width:104px" %)**Response** 1054 -|(% style="width:190px" %)AT+RX2WTO=?|(% style="width:199px" %)Get RXwindows2 timeout|(% style="width:104px" %)7((( 812 +|=(% colspan="3" %)AT+ RX2WTO 813 +|**Command Example**|**Function**|**Response** 814 +|AT+RX2WTO=?|Get RXwindows2 timeout|7((( 1055 1055 OK 1056 1056 ))) 1057 -| (% style="width:190px" %)AT+RX2WTO=20|(% style="width:199px" %)Set RXwindows2 timeout|(% style="width:104px" %)OK817 +|AT+RX2WTO=20|Set RXwindows2 timeout|OK 1058 1058 1059 - 1060 1060 == 7.22 Setting up uplinkdwelltime (as923, au915) == 1061 1061 1062 1062 Feature: Get or Set uplinkdwelltime 1063 1063 1064 -{{info}} 1065 -**AT Command: AT+DWELLT** 1066 -{{/info}} 823 +AT Command: AT+DWELLT 1067 1067 1068 -(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %) 1069 -|=(% colspan="3" style="width: 494px;" %)AT+DWELLT 1070 -|(% style="width:183px" %)**Command Example**|(% style="width:179px" %)**Function**|(% style="width:131px" %)**Response** 1071 -|(% style="width:183px" %)AT+DWELLT=?|(% style="width:179px" %)Get uplinkdwelltime|(% style="width:131px" %)1((( 825 +|=(% colspan="3" %)AT+DWELLT 826 +|**Command Example**|**Function**|**Response** 827 +|AT+DWELLT=?|Get uplinkdwelltime|1((( 1072 1072 OK 1073 1073 ))) 1074 -| (% style="width:183px" %)AT+DWELLT=0|(% style="width:179px" %)Set uplinkdwelltime|(% style="width:131px" %)OK830 +|AT+DWELLT=0|Set uplinkdwelltime|OK 1075 1075 1076 -{{info}} 1077 -**Downlink Command: 0x25** 1078 -{{/info}} 832 +Downlink Command: 0x25 1079 1079 1080 1080 Format: Command Code (0x25) followed by 1 bytes state value. 1081 1081 1082 1082 If the downlink payload=2501, it means set uplinkdwelltime to 1, while type code is 25. 1083 1083 1084 -* **Example 1**: Downlink Payload:**2501**~/~/ set uplinkdwelltime to 11085 -* **Example 2**: Downlink Payload:**2500**~/~/ set uplinkdwelltime to 0838 +* Example 1: Downlink Payload: 2501 ~/~/ set uplinkdwelltime to 1 839 +* Example 2: Downlink Payload: 2500 ~/~/ set uplinkdwelltime to 0 1086 1086 1087 - 1088 1088 == 7.23 Set Packet Receiving Response Level == 1089 1089 1090 1090 Feature: Get or Set packet receiving response level. This feature is used to set compatible with different LoRaWAN servers. If RPL doesn;t match , user will see strange message in the server portal. ... ... @@ -1091,11 +1091,11 @@ 1091 1091 1092 1092 RPL value: 1093 1093 1094 -* **AT+RPL=0:**Device won't immediately reply any downlink commands from platform.1095 -* **AT+RPL=1:**Device will immediately reply message to Unconfirmed Data Down. Payload is 0x00.1096 -* **AT+RPL=2:**Device will immediately reply message to Confirmed Data Down. Payload is 0x00 and requied response header for this command.1097 -* **AT+RPL=3:**Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command.1098 -* **AT+RPL=4:**Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands.847 +* AT+RPL=0: Device won't immediately reply any downlink commands from platform. 848 +* AT+RPL=1: Device will immediately reply message to Unconfirmed Data Down. Payload is 0x00. 849 +* AT+RPL=2: Device will immediately reply message to Confirmed Data Down. Payload is 0x00 and requied response header for this command. 850 +* AT+RPL=3: Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command. 851 +* AT+RPL=4: Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands. 1099 1099 1100 1100 Case Analyes: 1101 1101 ... ... @@ -1103,46 +1103,37 @@ 1103 1103 * For Class C devices used in ChirpStack, need to set AT+RPL=4 because Chirpstack require immedietely reply message to MAC Command. 1104 1104 * For Class C devices used in TTI, need to set AT+RPL=4 because TTI require immediately reply message to Confirmed Data Down & MAC Command. 1105 1105 1106 -{{info}} 1107 -**AT Command: AT+RPL** 1108 -{{/info}} 859 +AT Command: AT+RPL 1109 1109 1110 -(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %) 1111 -|=(% colspan="3" style="width: 533px;" %)AT+RPL 1112 -|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response** 1113 -|(% style="width:160px" %)AT+RPL=?|(% style="width:263px" %)Get packet receiving response level|(% style="width:109px" %)1((( 861 +|=(% colspan="3" %)AT+RPL 862 +|**Command Example**|**Function**|**Response** 863 +|AT+RPL=?|Get packet receiving response level|1((( 1114 1114 OK 1115 1115 ))) 1116 -| (% style="width:160px" %)AT+RPL=0|(% style="width:263px" %)Set packet receiving response level|(% style="width:109px" %)OK866 +|AT+RPL=0|Set packet receiving response level|OK 1117 1117 1118 -{{info}} 1119 -**Downlink Command: 0x21** 1120 -{{/info}} 868 +Downlink Command: 0x21 1121 1121 1122 1122 Format: Command Code (0x21) followed by 1 bytes level value. 1123 1123 1124 1124 If the downlink payload=2101, it means set packet receiving response level to 1, while type code is 21. 1125 1125 1126 -* **Example 1**: Downlink Payload:**2101**~/~/ set packet receiving response level to 11127 -* **Example 2**: Downlink Payload:**2102**~/~/ set packet receiving response level to 2874 +* Example 1: Downlink Payload: 2101 ~/~/ set packet receiving response level to 1 875 +* Example 2: Downlink Payload: 2102 ~/~/ set packet receiving response level to 2 1128 1128 1129 - 1130 1130 = 8. AT Commands Combination = 1131 1131 1132 1132 == 8.1 Set a fix RX2DR for downlink window == 1133 1133 1134 -* **AT+ADR=0**~-~-> Disable ADR first1135 -* **AT+RX2DR=xxxx**~-~-> Set xxxx to your wanted DataRate881 +* AT+ADR=0 ~-~-> Disable ADR first 882 +* AT+RX2DR=xxxx ~-~-> Set xxxx to your wanted DataRate 1136 1136 1137 - 1138 1138 == 8.2 Use Downlink Command to set a fix uplink DR == 1139 1139 1140 -{{info}} 1141 -**Downlink Command: 0x22000500** 1142 -{{/info}} 886 +Downlink Command: 0x22000500 1143 1143 1144 1144 Same as: 1145 1145 1146 -* AT+ADR=0 ||anchor="H7.1AdaptiveDataRate"]]1147 -* AT+DR=5 ||anchor="H7.4DataRate"]]1148 -* AT+TXP=0 ||anchor="H7.14TransmitPower"]]890 +* AT+ADR=0 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Adaptive_Data_Rate]] 891 +* AT+DR=5 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Data_Rate]] 892 +* AT+TXP=0 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Transmit_Power]]
- image-20220511120050-1.png
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -XWiki.Xiaoling - Size
-
... ... @@ -1,1 +1,0 @@ 1 -136.3 KB - Content
- image-20220526162535-1.png
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -XWiki.Xiaoling - Size
-
... ... @@ -1,1 +1,0 @@ 1 -149.4 KB - Content