Last modified by kai on 2024/09/06 10:00
<
From version < 38.74 >
edited by Xiaoling
on 2022/05/31 09:18
To version < 14.1 >
edited by Xiaoling
on 2022/05/11 12:00
>
Change comment: Uploaded new attachment "image-20220511120050-1.png", version {1}

Summary

Details

Page properties
Content
... ... @@ -1,9 +1,8 @@
1 - **Contents：**
1 +Contens
2 2  
3 3  {{toc/}}
4 4  
5 5  
6 -
7 7  = 1. Introduction =
8 8  
9 9  Dragino LoRaWAN End Node support two types of AT Commands and Downlink Commands:
... ... @@ -11,93 +11,34 @@
11 11  * **Common Commands:** They should be available for each sensor, such as: change uplink interval, reset device.
12 12  * **Sensor Related Commands:** Only for special sensor, such as control relay, poll RS485 device.
13 13  
14 -(((
15 15  **This page shows the common commands since Dragino LoRaWAN stack DR-LWS-005. Make sure the end node support stack higher than DR-LWS-005 before checking this page.**
16 16  
17 -)))
18 18  
19 19  = 2. How to use AT Commands or Downlink command =
20 20  
21 21  * For AT Command , See Devices User Manual for Device. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
22 22  * For LoRaWAN Downlink: The gateway transfer downlink command in HEX format. This page shows the HEX format downlink code for each command. but some servers use base64 as downlink code. Below are reference for how to use downlink command:
23 -** Use HEX format to send a downlink: [[TTN v3>>Notes for TTN]]
24 -** Use Base64 format to send a downlink: [[Chirpstack>>Notes for ChirpStack]]
25 -** See use note for more serves [[Servers Note>>doc:Main.WebHome]](IoT LoRaWAN Server)
20 +** Use HEX format to send a downlink: [[TTN v3>>url:https://wiki.dragino.com/index.php/Notes_for_TTN#Send_Downlink_message]]
21 +** Use Base64 format to send a downlink: [[Chirpstack>>url:https://wiki.dragino.com/index.php/Notes_for_ChirpStack#Downlink]].
22 +** See use note for more serves [[Servers Note>>url:https://wiki.dragino.com/index.php/Main_Page#Use_Note_for_Server]]
26 26  
27 27  = 3. Support End Node and firmware version =
28 28  
29 -(% border="1" style="background-color:#ffffcc; color:green; width:966px" %)
30 -|=(% colspan="3" style="width: 963px;" %)(((
31 -Dragino STM32 base hardware Firmware / LoRaWAN stack list
32 -)))
33 -|(% style="width:187px" %)(((
34 -**Model**
35 -)))|(% style="width:330px" %)(((
36 -**Description**
37 -)))|(% style="width:445px" %)(((
38 -**Firmware Version <~-~-> Stack Version**
39 -)))
40 -|(% style="width:187px" %)(((
41 -[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],
42 -)))|(% style="width:330px" %)(((
43 -Open Source Generic LoRaWAN Sensor Node
44 -)))|(% style="width:445px" %)(((
45 -(((
46 -LSN50 v1.6.0 <~-~-> DR-LWS-003;
47 -)))
48 -
49 -(((
50 -(((
26 +(% border="1" style="background-color:#ffffcc; border:1; color:green; width:995.222px" %)
27 +|=(% colspan="3" style="width: 992px;" %)Dragino STM32 base hardware Firmware / LoRaWAN stack list
28 +|(% style="width:187px" %)**Model**|(% style="width:349px" %)**Description**|(% style="width:453px" %)**Firmware Version <~-~-> Stack Version**
29 +|(% style="width:187px" %)[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],|(% style="width:349px" %)Open Source Generic LoRaWAN Sensor Node|(% style="width:453px" %)LSN50 v1.6.0 <~-~-> DR-LWS-003;(((
51 51  LSN50 v1.7.0 <~-~-> DR-LWS-005; ~-~-> Support since this version
52 52  )))
53 -)))
54 -)))
55 -|(% style="width:187px" %)(((
56 -[[LGT92>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/142-lgt-92.html]],
57 -)))|(% style="width:330px" %)(((
58 -LoRaWAN GPS Tracker
59 -)))|(% style="width:445px" %)(((
60 -(((
61 -LGT92 v1.6.3 <~-~-> DR-LWS-003;
62 -)))
63 -
64 -(((
65 -(((
32 +|(% style="width:187px" %)[[LGT92>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/142-lgt-92.html]],|(% style="width:349px" %)LoRaWAN GPS Tracker|(% style="width:453px" %)LGT92 v1.6.3 <~-~-> DR-LWS-003;(((
66 66  LGT92 v1.6.4 <~-~-> DR-LWS-005;~-~-> Support since this version
67 67  )))
68 -)))
69 -)))
70 -|(% style="width:187px" %)(((
71 -[[LBT1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/165-lbt1.html]],
72 -)))|(% style="width:330px" %)(((
73 -LoRaWAN BLE Indoor Tracker
74 -)))|(% style="width:445px" %)(((
75 -LBT1 v1.0 <~-~-> DR-LWS-005;
76 -)))
77 -|(% style="width:187px" %)(((
78 -[[RS485-LN>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/154-rs485-ln.html]],
79 -)))|(% style="width:330px" %)(((
80 -LoRaWAN RS485 Modbus Converter
81 -)))|(% style="width:445px" %)(((
82 -RS485-LN v1.3 <~-~-> DR-LWS-005;
83 -)))
84 -|(% style="width:187px" %)(((
85 -[[LHT65>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/151-lht65.html]],
86 -)))|(% style="width:330px" %)(((
87 -LoRaWAN Temperature & Humidity Sensor
88 -)))|(% style="width:445px" %)(((
89 -(((
90 -LHT65 v1.7 <~-~-> DR-LWS-003;
91 -)))
92 -
93 -(((
94 -(((
35 +|(% style="width:187px" %)[[LBT1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/165-lbt1.html]],|(% style="width:349px" %)LoRaWAN BLE Indoor Tracker|(% style="width:453px" %)LBT1 v1.0 <~-~-> DR-LWS-005;
36 +|(% style="width:187px" %)[[RS485-LN>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/154-rs485-ln.html]],|(% style="width:349px" %)LoRaWAN RS485 Modbus Converter|(% style="width:453px" %)RS485-LN v1.3 <~-~-> DR-LWS-005;
37 +|(% style="width:187px" %)[[LHT65>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/151-lht65.html]],|(% style="width:349px" %)LoRaWAN Temperature & Humidity Sensor|(% style="width:453px" %)LHT65 v1.7 <~-~-> DR-LWS-003;(((
95 95  LHT65 v1.8.0 <~-~-> DR-LWS-005;~-~-> Support since this version
96 96  )))
97 -)))
98 -)))
99 99  
100 -
101 101  = 4. System Management Commands =
102 102  
103 103  == 4.1 Change Uplink Interval ==
... ... @@ -125,18 +125,13 @@
125 125  **Downlink Command: 0x01**
126 126  {{/info}}
127 127  
128 -(((
129 129  Format: Command Code (0x01) followed by 3 bytes time value.
130 -)))
131 131  
132 -(((
133 133  If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
134 -)))
135 135  
136 136  * **Example 1**: Downlink Payload:** 0100001E** ~/~/ Set Transmit Interval (TDC) = 30 seconds
137 137  * **Example 2**: Downlink Payload:** 0100003C** ~/~/ Set Transmit Interval (TDC) = 60 seconds
138 138  
139 -
140 140  == 4.2 Reboot End Node ==
141 141  
142 142  Feature: Reboot End Node to perform a new OTAA or ABP Join.
... ... @@ -145,7 +145,7 @@
145 145  **AT Command: ATZ**
146 146  {{/info}}
147 147  
148 -(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
83 +(% border="0" style="background-color:#ffffcc; color:green; width:727.222px" %)
149 149  |=(% colspan="3" %)ATZ: Trig a reset of the MCU
150 150  |**Command Example**|**Function**|**Response**
151 151  |ATZ|Reset MCU|(((
... ... @@ -166,16 +166,10 @@
166 166  **Downlink Command: 0x04**
167 167  {{/info}}
168 168  
169 -(((
170 170  Format: Command Code (0x04) followed by FF.
171 -)))
172 172  
173 -(((
174 174  If the downlink payload=**04FF**, the end node will reboot.
175 175  
176 -
177 -)))
178 -
179 179  == 4.3 Reset to factory Default ==
180 180  
181 181  Feature: Reset the parameters to Factory Default, factory default value depends on the firmware settings, the OTAA and ABP keys will reserve after this command.
... ... @@ -184,7 +184,7 @@
184 184  **AT Command: AT+FDR**
185 185  {{/info}}
186 186  
187 -(% border="1" style="background-color:#ffffcc; color:green; width:831.222px" %)
116 +(% style="background-color:#ffffcc; color:green; width:831.222px" %)
188 188  |=(% colspan="3" style="width: 828px;" %)Reset to factory default
189 189  |(% style="width:181px" %)**Command Example**|(% style="width:181px" %)**Function**|(% style="width:465px" %)**Response**
190 190  |(% style="width:181px" %)AT+FDR|(% style="width:181px" %)Reset to factory default|(% style="width:465px" %)(((
... ... @@ -205,13 +205,9 @@
205 205  **Downlink Command: 0x04**
206 206  {{/info}}
207 207  
208 -(((
209 209  Format: Command Code (0x04) followed by FE.
210 -)))
211 211  
212 -(((
213 213  If the downlink payload=**04FE**, Reset Parameters to Factory Default, Keys Reserve.
214 -)))
215 215  
216 216  
217 217  == 4.4 Show Firmware Version ==
... ... @@ -222,10 +222,10 @@
222 222  **AT Command: AT+VER**
223 223  {{/info}}
224 224  
225 -(% border="1" style="background-color:#ffffcc; color:green; width:586px" %)
226 -|=(% colspan="3" style="width: 583px;" %)AT+VER: Image Version and Frequency Band
227 -|(% style="width:170px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:113px" %)**Response**
228 -|(% style="width:170px" %)AT+VER=?|(% style="width:300px" %)Show Image version and Frequency Band|(% style="width:113px" %)(((
150 +(% style="background-color:#ffffcc; color:green" %)
151 +|=(% colspan="3" %)AT+VER: Image Version and Frequency Band
152 +|**Command Example**|**Function**|**Response**
153 +|AT+VER=?|Show Image version and Frequency Band|(((
229 229  1.3 EU868
230 230  
231 231  OK
... ... @@ -235,25 +235,17 @@
235 235  **Downlink Command: 0x26 (Valid in 006 stack)**
236 236  {{/info}}
237 237  
238 -(((
239 239  Downlink Format: 0x26
240 -)))
241 241  
242 -(((
243 243  Device will reply with firmware version info, device info. frequency band info. detail please check device user manual. Total 5 bytes Example: If device is of firmware version 1.1.0 Upload: xx ~-~- yy ~-~- zz ~-~- 110 total 5 bytes
244 -)))
245 245  
246 -(((
247 247  **xx: Software Type:**
248 -)))
249 249  
250 250  * 0x00 01: LGT92 Version
251 251  * 0x00 02: LBT1
252 252  * 0x00 03: LSE01/LDDS75/LDDS20/LSPH01/LLMS01/LSNPK01
253 253  
254 -(((
255 255  **yy: Frequency Band:**
256 -)))
257 257  
258 258  * 0x01: EU868
259 259  * 0x02: US915
... ... @@ -266,9 +266,7 @@
266 266  * 0x09: AS923-2
267 267  * 0xa0: AS923-3
268 268  
269 -(((
270 270  **zz: Subband**
271 -)))
272 272  
273 273  firmware version: v1.1.0 ~-~-> 110
274 274  
... ... @@ -281,7 +281,7 @@
281 281  **AT Command: AT+CFG**
282 282  {{/info}}
283 283  
284 -(% border="1" style="background-color:#ffffcc; color:green; width:599.222px" %)
199 +(% style="background-color:#ffffcc; color:green; width:599.222px" %)
285 285  |=(% colspan="3" style="width: 596px;" %)AT+CFG: Print all configurations
286 286  |(% style="width:160px" %)**Command Example**|(% style="width:154px" %)**Function**|(% style="width:280px" %)**Response**
287 287  |(% style="width:160px" %)AT+CFG|(% style="width:154px" %)Show all configures|(% style="width:280px" %)(((
... ... @@ -298,7 +298,6 @@
298 298  OK
299 299  )))
300 300  
301 -
302 302  = 5. Keys, IDs and EUIs management =
303 303  
304 304  == 5.1 Application EUI ==
... ... @@ -309,7 +309,7 @@
309 309  **AT Command: AT+APPEUI**
310 310  {{/info}}
311 311  
312 -(% border="1" style="background-color:#ffffcc; color:green; width:686.222px" %)
226 +(% style="background-color:#ffffcc; color:green; width:686.222px" %)
313 313  |=(% colspan="3" style="width: 683px;" %)AT+APPEUI
314 314  |(% style="width:305px" %)**Command Example**|(% style="width:186px" %)**Function**|(% style="width:191px" %)**Response**
315 315  |(% style="width:305px" %)AT+APPEUI=?|(% style="width:186px" %)Get the Application EUI|(% style="width:191px" %)00 b3 d5 00 00 00 00 00(((
... ... @@ -317,7 +317,6 @@
317 317  )))
318 318  |(% style="width:305px" %)AT+APPEUI=00 b3 d5 7e f0 00 4d 34|(% style="width:186px" %)Set the Application EUI|(% style="width:191px" %)OK
319 319  
320 -
321 321  == 5.2 Application Key ==
322 322  
323 323  Feature: Get or Set the Application Key.
... ... @@ -326,7 +326,7 @@
326 326  **AT Command: AT+APPKEY**
327 327  {{/info}}
328 328  
329 -(% border="1" style="background-color:#ffffcc; color:green; width:976.222px" %)
242 +(% style="background-color:#ffffcc; color:green; width:976.222px" %)
330 330  |=(% colspan="3" style="width: 973px;" %)AT+APPKEY
331 331  |(% style="width:441px" %)**Command Example**|(% style="width:180px" %)**Function**|(% style="width:350px" %)**Response**
332 332  |(% style="width:441px" %)AT+APPKEY=?|(% style="width:180px" %)Get the Application Key|(% style="width:350px" %)00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35(((
... ... @@ -342,7 +342,7 @@
342 342  **AT Command: AT+APPSKEY**
343 343  {{/info}}
344 344  
345 -(% border="1" style="background-color:#ffffcc; color:green; width:1040.22px" %)
258 +(% style="background-color:#ffffcc; color:green; width:1040.22px" %)
346 346  |=(% colspan="3" style="width: 1037px;" %)AT+APPSKEY
347 347  |(% style="width:451px" %)**Command Example**|(% style="width:231px" %)**Function**|(% style="width:354px" %)**Response**
348 348  |(% style="width:451px" %)AT+APPSKEY=?|(% style="width:231px" %)Get the Application Session Key|(% style="width:354px" %)00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2(((
... ... @@ -360,7 +360,7 @@
360 360  **AT Command: AT+DADDR**
361 361  {{/info}}
362 362  
363 -(% border="1" style="background-color:#ffffcc; color:green; width:795.222px" %)
276 +(% style="background-color:#ffffcc; color:green; width:795.222px" %)
364 364  |=(% colspan="3" style="width: 792px;" %)AT+DADDR
365 365  |(% style="width:192px" %)**Command Example**|(% style="width:241px" %)**Function**|(% style="width:359px" %)**Response**
366 366  |(% style="width:192px" %)AT+DADDR=?|(% style="width:241px" %)Get the Application Session Key.|(% style="width:359px" %)(While Error in format, return AT_PARAM_ERROR)(((
... ... @@ -378,7 +378,7 @@
378 378  **AT Command: AT+DEUI**
379 379  {{/info}}
380 380  
381 -(% border="1" style="background-color:#ffffcc; color:green; width:1035.22px" %)
294 +(% style="background-color:#ffffcc; color:green; width:1035.22px" %)
382 382  |=(% colspan="3" style="width: 1032px;" %)AT+DEUI
383 383  |(% style="width:250px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:634px" %)**Response**
384 384  |(% style="width:250px" %)AT+DEUI=?|(% style="width:147px" %)Get the Device EUI.|(% style="width:634px" %)00 44 34 22 33 45 55 55(((
... ... @@ -396,7 +396,7 @@
396 396  **AT Command: AT+NWKID**
397 397  {{/info}}
398 398  
399 -(% border="1" style="background-color:#ffffcc; color:green; width:448.222px" %)
312 +(% style="background-color:#ffffcc; color:green; width:448.222px" %)
400 400  |=(% colspan="3" style="width: 445px;" %)AT+NWKID
401 401  |(% style="width:191px" %)**Command Example**|(% style="width:153px" %)**Function**|(% style="width:101px" %)**Response**
402 402  |(% style="width:191px" %)AT+NWKID=?|(% style="width:153px" %)Get the Network ID.|(% style="width:101px" %)a8 40 41 ff(((
... ... @@ -404,8 +404,6 @@
404 404  )))
405 405  |(% style="width:191px" %)AT+NWKID=A8 40 41 FF|(% style="width:153px" %)Set the Network ID.|(% style="width:101px" %)OK
406 406  
407 -
408 -
409 409  == 5.7 Network Session Key ==
410 410  
411 411  Feature: Get or Set the Network Session Key
... ... @@ -414,7 +414,7 @@
414 414  **AT Command: AT+NWKSKEY**
415 415  {{/info}}
416 416  
417 -(% border="1" style="background-color:#ffffcc; color:green; width:1017.22px" %)
328 +(% style="background-color:#ffffcc; color:green; width:1017.22px" %)
418 418  |=(% colspan="3" style="width: 1014px;" %)AT+NWKSKEY
419 419  |(% style="width:455px" %)**Command Example**|(% style="width:215px" %)**Function**|(% style="width:343px" %)**Response**
420 420  |(% style="width:455px" %)AT+NWKSKEY=?|(% style="width:215px" %)Get the Network Session Key.|(% style="width:343px" %)00 4f 19 25 52 ce 97 09 d7 fa 84 71 db 51 02 92(((
... ... @@ -422,8 +422,6 @@
422 422  )))
423 423  |(% style="width:455px" %)AT+NWKSKEY=A8 40 41 FF FF 12 34 56 00 01 02 04 05 06 06 07|(% style="width:215px" %)Set the Network Session Key.|(% style="width:343px" %)OK
424 424  
425 -
426 -
427 427  = 6. Joining and sending date on LoRaWAN network =
428 428  
429 429  == 6.1 Confirm Mode ==
... ... @@ -434,7 +434,7 @@
434 434  **AT Command: AT+CFM**
435 435  {{/info}}
436 436  
437 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
346 +(% style="background-color:#ffffcc; color:green; width:710.222px" %)
438 438  |=(% colspan="3" style="width: 707px;" %)AT+CFM
439 439  |(% style="width:155px" %)**Command Example**|(% style="width:205px" %)**Function**|(% style="width:346px" %)**Response**
440 440  |(% style="width:155px" %)AT+CFM=?|(% style="width:205px" %)Get the confirmation mode|(% style="width:346px" %)0(((
... ... @@ -452,8 +452,6 @@
452 452  * Example 1: Downlink Payload: 0501 ~/~/ Set AT+CFM=1
453 453  * Example 2: Downlink Payload: 0500 ~/~/ Set AT+CFM=0
454 454  
455 -
456 -
457 457  == 6.2 Confirm Status ==
458 458  
459 459  Feature: Get confirmation status of the last AT+SEND (0-1).
... ... @@ -462,7 +462,7 @@
462 462  **AT Command: AT+CFS**
463 463  {{/info}}
464 464  
465 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
372 +(% style="background-color:#ffffcc; color:green; width:534.222px" %)
466 466  |=(% colspan="3" style="width: 531px;" %)AT+CFS
467 467  |(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:178px" %)**Response**
468 468  |(% style="width:156px" %)AT+CFS=?|(% style="width:193px" %)Get confirmation status|(% style="width:178px" %)0(((
... ... @@ -469,8 +469,6 @@
469 469  OK
470 470  )))
471 471  
472 -
473 -
474 474  == 6.3 Join LoRa® Network ==
475 475  
476 476  Feature: Join network.
... ... @@ -479,7 +479,7 @@
479 479  **AT Command: AT+JOIN**
480 480  {{/info}}
481 481  
482 -(% border="1" style="background-color:#ffffcc; color:green; width:647.222px" %)
387 +(% style="background-color:#ffffcc; color:green; width:647.222px" %)
483 483  |=(% colspan="3" style="width: 644px;" %)AT+JOIN
484 484  |(% style="width:163px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:334px" %)**Response**
485 485  |(% style="width:163px" %)AT+JOIN ?|(% style="width:147px" %)Get imformation.|(% style="width:334px" %)AT+JOIN: Join network(((
... ... @@ -488,7 +488,6 @@
488 488  While Error in format, return AT_BUSY_ERROR
489 489  )))
490 490  
491 -
492 492  == 6.4 LoRa® Network Join Mode ==
493 493  
494 494  Feature: Get or Set the Network Join Mode. (0: ABP, 1: OTAA).
... ... @@ -497,7 +497,7 @@
497 497  **AT Command: AT+NJM**
498 498  {{/info}}
499 499  
500 -(% border="1" style="background-color:#ffffcc; color:green; width:753.222px" %)
404 +(% style="background-color:#ffffcc; color:green; width:753.222px" %)
501 501  |=(% colspan="3" style="width: 750px;" %)AT+NJM
502 502  |(% style="width:162px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:361px" %)**Response**
503 503  |(% style="width:162px" %)AT+NJM=?|(% style="width:227px" %)Get the Network Join Mode|(% style="width:361px" %)1(((
... ... @@ -517,7 +517,6 @@
517 517  * **Example 1: **Downlink Payload: **2000** ~/~/ Set AT+NJM=O
518 518  * **Example 2:** Downlink Payload: **2001** ~/~/ Set AT+NJM=1
519 519  
520 -
521 521  == 6.5 LoRa® Network Join Status ==
522 522  
523 523  Feature: LoRa® Network Join Status.
... ... @@ -526,7 +526,7 @@
526 526  **AT Command: AT+NJS**
527 527  {{/info}}
528 528  
529 -(% border="1" style="background-color:#ffffcc; color:green; width:498.222px" %)
432 +(% style="background-color:#ffffcc; color:green; width:498.222px" %)
530 530  |=(% colspan="3" style="width: 495px;" %)AT+NJS
531 531  |(% style="width:169px" %)**Command Example**|(% style="width:164px" %)**Function**|(% style="width:161px" %)**Response**
532 532  |(% style="width:169px" %)AT+NJS=?|(% style="width:164px" %)Get the join status.|(% style="width:161px" %)0(((
... ... @@ -533,7 +533,6 @@
533 533  OK
534 534  )))
535 535  
536 -
537 537  == 6.6 Print Last Received Data in Raw Format ==
538 538  
539 539  Feature: Print Last Received Data in Raw Format<port:data>.
... ... @@ -542,7 +542,7 @@
542 542  **AT Command: AT+RECV**
543 543  {{/info}}
544 544  
545 -(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
447 +(% style="background-color:#ffffcc; color:green; width:587.222px" %)
546 546  |=(% colspan="3" style="width: 584px;" %)AT+RECV
547 547  |(% style="width:161px" %)**Command Example**|(% style="width:272px" %)**Function**|(% style="width:150px" %)**Response**
548 548  |(% style="width:161px" %)AT+RECV=?|(% style="width:272px" %)print last received data in raw format.|(% style="width:150px" %)0:(((
... ... @@ -549,7 +549,6 @@
549 549  OK
550 550  )))
551 551  
552 -
553 553  == 6.7 Print Last Received Data in Binary Format ==
554 554  
555 555  Feature: Print Last Received Data in Binary Format<port:data>.
... ... @@ -558,7 +558,7 @@
558 558  **AT Command: AT+RECVB**
559 559  {{/info}}
560 560  
561 -(% border="1" style="background-color:#ffffcc; color:green; width:793.222px" %)
462 +(% style="background-color:#ffffcc; color:green; width:793.222px" %)
562 562  |=(% colspan="3" style="width: 790px;" %)AT+RECVB
563 563  |(% style="width:173px" %)**Command Example**|(% style="width:497px" %)**Function**|(% style="width:120px" %)**Response**
564 564  |(% style="width:173px" %)AT+RECVB=?|(% style="width:497px" %)print last received data in binary format (with hexadecimal values).|(% style="width:120px" %)2: 0010(((
... ... @@ -565,7 +565,6 @@
565 565  OK
566 566  )))
567 567  
568 -
569 569  == 6.8 Send Text Data ==
570 570  
571 571  Feature: Send Text Data<port:data>.
... ... @@ -574,7 +574,7 @@
574 574  **AT Command: AT+SEND**
575 575  {{/info}}
576 576  
577 -(% border="1" style="background-color:#ffffcc; color:green; width:991.222px" %)
477 +(% style="background-color:#ffffcc; color:green; width:991.222px" %)
578 578  |=(% colspan="3" style="width: 988px;" %)AT+SEND
579 579  |(% style="width:201px" %)**Command Example**|(% style="width:340px" %)**Function**|(% style="width:446px" %)**Response**
580 580  |(% style="width:201px" %)AT+SEND=12:hello world|(% style="width:340px" %)Send text data along with the application port.|(% style="width:446px" %)OK(((
... ... @@ -585,7 +585,6 @@
585 585  
586 586  )))
587 587  
588 -
589 589  == 6.9 Send Hexadecimal Data ==
590 590  
591 591  Feature: Send hexadecimal data along with the application port.
... ... @@ -594,7 +594,7 @@
594 594  **AT Command: AT+SENDB**
595 595  {{/info}}
596 596  
597 -(% border="1" style="background-color:#ffffcc; color:green; width:1120.22px" %)
496 +(% style="background-color:#ffffcc; color:green; width:1120.22px" %)
598 598  |=(% colspan="3" style="width: 1117px;" %)AT+SENDB
599 599  |(% style="width:257px" %)**Command Example**|(% style="width:406px" %)**Function**|(% style="width:453px" %)**Response**
600 600  |(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)OK
... ... @@ -604,7 +604,6 @@
604 604  
605 605  )))
606 606  
607 -
608 608  = 7. LoRaWAN network management =
609 609  
610 610  == 7.1 Adaptive Data Rate ==
... ... @@ -615,7 +615,7 @@
615 615  **AT Command: AT+ADR**
616 616  {{/info}}
617 617  
618 -(% border="1" style="background-color:#ffffcc; color:green; width:683.222px" %)
516 +(% style="background-color:#ffffcc; color:green; width:683.222px" %)
619 619  |=(% colspan="3" style="width: 680px;" %)AT+ADR
620 620  |(% style="width:162px" %)**Command Example**|(% style="width:266px" %)**Function**|(% style="width:250px" %)**Response**
621 621  |(% style="width:162px" %)AT+ADR=?|(% style="width:266px" %)Get the Adaptive Data Rate setting.|(% style="width:250px" %)1(((
... ... @@ -636,7 +636,6 @@
636 636  * **Example 1**: Downlink Payload: **2201** ~/~/ Set AT+ADR=1.
637 637  * **Example 2**: Downlink Payload: **2200FFFF** ~/~/ Set AT+ADR=0.
638 638  
639 -
640 640  == 7.2 LoRa® Class ==
641 641  
642 642  Feature: Get or Set the Device Class(Currently only support class A, class C).
... ... @@ -645,7 +645,7 @@
645 645  **AT Command:AT+CLASS**
646 646  {{/info}}
647 647  
648 -(% border="1" style="background-color:#ffffcc; color:green; width:507.222px" %)
545 +(% style="background-color:#ffffcc; color:green; width:507.222px" %)
649 649  |=(% colspan="3" style="width: 504px;" %)AT+CLASS
650 650  |(% style="width:163px" %)**Command Example**|(% style="width:166px" %)**Function**|(% style="width:175px" %)**Response**
651 651  |(% style="width:163px" %)AT+CLASS=?|(% style="width:166px" %)Get the Device Class.|(% style="width:175px" %)A(((
... ... @@ -655,7 +655,6 @@
655 655  
656 656  )))
657 657  
658 -
659 659  == 7.3 Duty Cycle Setting ==
660 660  
661 661  Feature: Get or Set the ETSI Duty Cycle setting - 0=disable, 1=enable - Only for testing.
... ... @@ -664,7 +664,7 @@
664 664  **AT Command:AT+DCS**
665 665  {{/info}}
666 666  
667 -(% border="1" style="background-color:#ffffcc; color:green; width:515.222px" %)
563 +(% style="background-color:#ffffcc; color:green; width:515.222px" %)
668 668  |=(% colspan="3" style="width: 512px;" %)AT+DCS
669 669  |(% style="width:165px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:107px" %)**Response**
670 670  |(% style="width:165px" %)AT+DCS=?|(% style="width:239px" %)Get the ETSI Duty Cycle setting.|(% style="width:107px" %)1(((
... ... @@ -674,7 +674,6 @@
674 674  
675 675  )))
676 676  
677 -
678 678  == 7.4 Data Rate ==
679 679  
680 680  Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) . Note: while set Data Rate, please use set Adptive Data Rate, ADR=0 first. otherwise device will response to server's ADR command and change the DR to the setting from server
... ... @@ -683,7 +683,7 @@
683 683  **AT Command: AT+DR**
684 684  {{/info}}
685 685  
686 -(% border="1" style="background-color:#ffffcc; color:green; width:466.222px" %)
581 +(% style="background-color:#ffffcc; color:green; width:466.222px" %)
687 687  |=(% colspan="3" style="width: 463px;" %)AT+DR
688 688  |(% style="width:156px" %)**Command Example**|(% style="width:167px" %)**Function**|(% style="width:140px" %)**Response**
689 689  |(% style="width:156px" %)AT+DR=?|(% style="width:167px" %)Get the Data Rate.|(% style="width:140px" %)5(((
... ... @@ -703,7 +703,6 @@
703 703  * **Example 1**: Downlink Payload: **220001FF** ~/~/ Set AT+DR=1.
704 704  * **Example 2**: Downlink Payload: **220000FF** ~/~/ Set AT+DR=0.
705 705  
706 -
707 707  == 7.5 Frame Counter Downlink ==
708 708  
709 709  Feature: Get or Set the Frame Counter Downlink.
... ... @@ -712,7 +712,7 @@
712 712  **AT Command:AT+FCD**
713 713  {{/info}}
714 714  
715 -(% border="1" style="background-color:#ffffcc; color:green; width:693.222px" %)
609 +(% style="background-color:#ffffcc; color:green; width:693.222px" %)
716 716  |=(% colspan="3" style="width: 690px;" %)AT+FCD
717 717  |(% style="width:162px" %)**Command Example**|(% style="width:258px" %)**Function**|(% style="width:269px" %)**Response**
718 718  |(% style="width:162px" %)AT+FCD=?|(% style="width:258px" %)Get the Frame Counter Downlink.|(% style="width:269px" %)0(((
... ... @@ -724,7 +724,6 @@
724 724  
725 725  )))
726 726  
727 -
728 728  == 7.6 Frame Counter Uplink ==
729 729  
730 730  Feature: Get or Set the Frame Counter Uplink.
... ... @@ -733,7 +733,7 @@
733 733  **AT Command:AT+FCU**
734 734  {{/info}}
735 735  
736 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
629 +(% style="background-color:#ffffcc; color:green; width:534.222px" %)
737 737  |=(% colspan="3" style="width: 531px;" %)AT+FCU
738 738  |(% style="width:177px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:113px" %)**Response**
739 739  |(% style="width:177px" %)AT+FCU=?|(% style="width:239px" %)Get the Frame Counter Uplink.|(% style="width:113px" %)0(((
... ... @@ -743,7 +743,6 @@
743 743  
744 744  )))
745 745  
746 -
747 747  == 7.7 Join Accept Delay1 ==
748 748  
749 749  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 1 in ms.
... ... @@ -752,7 +752,7 @@
752 752  **AT Command:AT+JN1DL**
753 753  {{/info}}
754 754  
755 -(% border="1" style="background-color:#ffffcc; color:green; width:537.222px" %)
647 +(% style="background-color:#ffffcc; color:green; width:537.222px" %)
756 756  |=(% colspan="3" style="width: 534px;" %)AT+JN1DL
757 757  |(% style="width:164px" %)**Command Example**|(% style="width:229px" %)**Function**|(% style="width:140px" %)**Response**
758 758  |(% style="width:164px" %)AT+JN1DL=?|(% style="width:229px" %)Get the Join Accept Delay.|(% style="width:140px" %)5000(((
... ... @@ -762,7 +762,6 @@
762 762  
763 763  )))
764 764  
765 -
766 766  == 7.8 Join Accept Delay2 ==
767 767  
768 768  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 2 in ms.
... ... @@ -771,7 +771,7 @@
771 771  **AT Command:AT+JN2DL**
772 772  {{/info}}
773 773  
774 -(% border="1" style="background-color:#ffffcc; color:green; width:538.222px" %)
665 +(% style="background-color:#ffffcc; color:green; width:538.222px" %)
775 775  |=(% colspan="3" style="width: 535px;" %)AT+JN2DL
776 776  |(% style="width:160px" %)**Command Example**|(% style="width:228px" %)**Function**|(% style="width:146px" %)**Response**
777 777  |(% style="width:160px" %)AT+JN2DL=?|(% style="width:228px" %)Get the Join Accept Delay.|(% style="width:146px" %)6000(((
... ... @@ -781,7 +781,6 @@
781 781  
782 782  )))
783 783  
784 -
785 785  == 7.9 Public Network Mode ==
786 786  
787 787  Feature: Get or Set the public network mode. (0: off, 1: on)
... ... @@ -790,7 +790,7 @@
790 790  **AT Command:AT+PNM**
791 791  {{/info}}
792 792  
793 -(% border="1" style="background-color:#ffffcc; color:green; width:667.222px" %)
683 +(% style="background-color:#ffffcc; color:green; width:667.222px" %)
794 794  |=(% colspan="3" style="width: 664px;" %)AT+PNM
795 795  |(% style="width:166px" %)**Command Example**|(% style="width:225px" %)**Function**|(% style="width:272px" %)**Response**
796 796  |(% style="width:166px" %)AT+PNM=?|(% style="width:225px" %)Get the public network mode.|(% style="width:272px" %)1(((
... ... @@ -802,7 +802,6 @@
802 802  
803 803  )))
804 804  
805 -
806 806  == 7.10 Receive Delay1 ==
807 807  
808 808  Feature: Get or Set the delay between the end of the Tx and the Rx Window 1 in ms
... ... @@ -811,7 +811,7 @@
811 811  **AT Command:AT+RX1DL**
812 812  {{/info}}
813 813  
814 -(% border="1" style="background-color:#ffffcc; color:green; width:408.222px" %)
703 +(% style="background-color:#ffffcc; color:green; width:408.222px" %)
815 815  |=(% colspan="3" style="width: 405px;" %)AT+RX1DL
816 816  |(% style="width:155px" %)**Command Example**|(% style="width:128px" %)**Function**|(% style="width:122px" %)**Response**
817 817  |(% style="width:155px" %)AT+RX1DL=?|(% style="width:128px" %)Get the delay.|(% style="width:122px" %)1000(((
... ... @@ -821,9 +821,8 @@
821 821  
822 822  )))
823 823  
713 +== 7.11Receive Delay2 ==
824 824  
825 -== 7.11 Receive Delay2 ==
826 -
827 827  Feature: Get or Set the delay between the end of the Tx and the Rx Window 2 in ms
828 828  
829 829  {{info}}
... ... @@ -830,7 +830,7 @@
830 830  **AT Command:AT+RX2DL**
831 831  {{/info}}
832 832  
833 -(% border="1" style="background-color:#ffffcc; color:green; width:481.222px" %)
721 +(% style="background-color:#ffffcc; color:green; width:481.222px" %)
834 834  |=(% colspan="3" style="width: 478px;" %)AT+RX2DL
835 835  |(% style="width:175px" %)**Command Example**|(% style="width:152px" %)**Function**|(% style="width:150px" %)**Response**
836 836  |(% style="width:175px" %)AT+RX2DL=?|(% style="width:152px" %)Get the delay.|(% style="width:150px" %)2000(((
... ... @@ -840,7 +840,6 @@
840 840  
841 841  )))
842 842  
843 -
844 844  == 7.12 Rx2 Window Data Rate ==
845 845  
846 846  Feature: Get or Set the Rx2 window data rate (0-7 corresponding to DR_X)
... ... @@ -849,7 +849,7 @@
849 849  **AT Command:AT+RX2DR**
850 850  {{/info}}
851 851  
852 -(% border="1" style="background-color:#ffffcc; color:green; width:525.222px" %)
739 +(% style="background-color:#ffffcc; color:green; width:525.222px" %)
853 853  |=(% colspan="3" style="width: 522px;" %)AT+RX2DR
854 854  |(% style="width:160px" %)**Command Example**|(% style="width:232px" %)**Function**|(% style="width:130px" %)**Response**
855 855  |(% style="width:160px" %)AT+RX2DR=?|(% style="width:232px" %)Get the Rx2 window data rate.|(% style="width:130px" %)2(((
... ... @@ -859,7 +859,6 @@
859 859  
860 860  )))
861 861  
862 -
863 863  == 7.13 Rx2 Window Frequency ==
864 864  
865 865  Feature: Get or Set the Rx2 window frequency
... ... @@ -868,7 +868,7 @@
868 868  **AT Command:AT+RX2FQ**
869 869  {{/info}}
870 870  
871 -(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
757 +(% style="background-color:#ffffcc; color:green; width:587.222px" %)
872 872  |=(% colspan="3" style="width: 584px;" %)AT+RX2FQ
873 873  |(% style="width:183px" %)**Command Example**|(% style="width:240px" %)**Function**|(% style="width:160px" %)**Response**
874 874  |(% style="width:183px" %)AT+RX2FQ=?|(% style="width:240px" %)Get the Rx2 window frequency.|(% style="width:160px" %)434665000(((
... ... @@ -878,7 +878,6 @@
878 878  
879 879  )))
880 880  
881 -
882 882  == 7.14 Transmit Power ==
883 883  
884 884  Feature: Get or Set the Transmit Power(0-5, MAX:0, MIN:5, according to LoRaWAN Spec, or 40=10dB, 41 = 11dB, …, 50 = 20dB which is out of LoRaWAN spec. )
... ... @@ -887,7 +887,7 @@
887 887  **AT Command:AT+TXP**
888 888  {{/info}}
889 889  
890 -(% border="1" style="background-color:#ffffcc; color:green; width:465.222px" %)
775 +(% style="background-color:#ffffcc; color:green; width:465.222px" %)
891 891  |=(% colspan="3" style="width: 462px;" %)AT+TXP
892 892  |(% style="width:161px" %)**Command Example**|(% style="width:189px" %)**Function**|(% style="width:112px" %)**Response**
893 893  |(% style="width:161px" %)AT+TXP=?|(% style="width:189px" %)Get the Transmit Power.|(% style="width:112px" %)0(((
... ... @@ -904,7 +904,6 @@
904 904  * **Example 1**: Downlink Payload: **22000102** ~/~/ Set AT+TXP=2.
905 905  * **Example 2**: Downlink Payload: **220000FF** ~/~/ Set AT+TXP=0.
906 906  
907 -
908 908  == 7.15 RSSI of the Last Received Packet ==
909 909  
910 910  Feature: Get or Set the Rx2 window frequency
... ... @@ -913,7 +913,7 @@
913 913  **AT Command:AT+RSSI**
914 914  {{/info}}
915 915  
916 -(% border="1" style="background-color:#ffffcc; color:green; width:557.222px" %)
800 +(% style="background-color:#ffffcc; color:green; width:557.222px" %)
917 917  |=(% colspan="3" style="width: 554px;" %)AT+RSSI
918 918  |(% style="width:164px" %)**Command Example**|(% style="width:289px" %)**Function**|(% style="width:100px" %)**Response**
919 919  |(% style="width:164px" %)AT+RSSI=?|(% style="width:289px" %)Get the RSSI of the last received packet.|(% style="width:100px" %)0(((
... ... @@ -920,7 +920,6 @@
920 920  OK
921 921  )))
922 922  
923 -
924 924  == 7.16 SNR of the Last Received Packet ==
925 925  
926 926  Feature: Get the SNR of the last received packet
... ... @@ -929,7 +929,7 @@
929 929  **AT Command:AT+SNR**
930 930  {{/info}}
931 931  
932 -(% border="1" style="background-color:#ffffcc; color:green; width:571.222px" %)
815 +(% style="background-color:#ffffcc; color:green; width:571.222px" %)
933 933  |=(% colspan="3" style="width: 568px;" %)AT+SNR
934 934  |(% style="width:164px" %)**Command Example**|(% style="width:290px" %)**Function**|(% style="width:113px" %)**Response**
935 935  |(% style="width:164px" %)AT+SNR=?|(% style="width:290px" %)Get the RSSI of the last received packet.|(% style="width:113px" %)0(((
... ... @@ -936,7 +936,6 @@
936 936  OK
937 937  )))
938 938  
939 -
940 940  == 7.17 Application Port ==
941 941  
942 942  Feature: Get or set the application port.
... ... @@ -945,7 +945,7 @@
945 945  **AT Command: AT+PORT**
946 946  {{/info}}
947 947  
948 -(% border="1" style="background-color:#ffffcc; color:green; width:500.222px" %)
830 +(% style="background-color:#ffffcc; color:green; width:500.222px" %)
949 949  |=(% colspan="3" style="width: 497px;" %)AT+PORT
950 950  |(% style="width:157px" %)**Command Example**|(% style="width:204px" %)**Function**|(% style="width:135px" %)**Response**
951 951  |(% style="width:157px" %)AT+PORT=?|(% style="width:204px" %)Get the application port|(% style="width:135px" %)21(((
... ... @@ -964,7 +964,6 @@
964 964  * **Example 1**: Downlink Payload: **2301** ~/~/ set the application port to 1
965 965  * **Example 2**: Downlink Payload:** 2305** ~/~/ set the application port to 5
966 966  
967 -
968 968  == 7.18 Single Channel Mode ==
969 969  
970 970  Feature:Get or Set Frequency (Unit: Hz) for Single Channel Mode.
... ... @@ -973,7 +973,7 @@
973 973  **AT Command: AT+CHS**
974 974  {{/info}}
975 975  
976 -(% border="1" style="background-color:#ffffcc; color:green; width:603.222px" %)
857 +(% style="background-color:#ffffcc; color:green; width:603.222px" %)
977 977  |=(% colspan="3" style="width: 600px;" %)AT+CHS
978 978  |(% style="width:182px" %)**Command Example**|(% style="width:295px" %)**Function**|(% style="width:122px" %)**Response**
979 979  |(% style="width:182px" %)AT+CHS=?|(% style="width:295px" %)Get Frequency for Single Channel Mode|(% style="width:122px" %)0(((
... ... @@ -981,7 +981,6 @@
981 981  )))
982 982  |(% style="width:182px" %)AT+CHS=868100000|(% style="width:295px" %)Set Frequency for Single Channel Mode|(% style="width:122px" %)OK
983 983  
984 -
985 985  == 7.19 Eight Channel Mode ==
986 986  
987 987  Feature: Get or Set eight channels mode,Only for US915,AU915,CN470.
... ... @@ -990,7 +990,7 @@
990 990  **AT Command: AT+CHE**
991 991  {{/info}}
992 992  
993 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
873 +(% style="background-color:#ffffcc; color:green; width:710.222px" %)
994 994  |=(% colspan="3" style="width: 707px;" %)AT+CHE
995 995  |(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
996 996  |(% style="width:160px" %)AT+CHE=?|(% style="width:198px" %)Get eight channels mode|(% style="width:349px" %)1(((
... ... @@ -1011,7 +1011,6 @@
1011 1011  * **Example 1**: Downlink Payload: 2401 ~/~/ set channel mode to 1
1012 1012  * **Example 2**: Downlink Payload: 2405 ~/~/ set channel mode to 5
1013 1013  
1014 -
1015 1015  == 7.20 Get or Set RXwindows1 timeout ==
1016 1016  
1017 1017  Feature:Get or Set the number of symbols to detect and timeout from RXwindow1(0 to 255).
... ... @@ -1020,7 +1020,7 @@
1020 1020  **AT Command: AT+RX1WTO**
1021 1021  {{/info}}
1022 1022  
1023 -(% border="1" style="background-color:#ffffcc; color:green; width:460.222px" %)
902 +(% style="background-color:#ffffcc; color:green; width:460.222px" %)
1024 1024  |=(% colspan="3" style="width: 457px;" %)AT+ RX1WTO
1025 1025  |(% style="width:163px" %)**Command Example**|(% style="width:201px" %)**Function**|(% style="width:93px" %)**Response**
1026 1026  |(% style="width:163px" %)AT+RX1WTO=?|(% style="width:201px" %)Get RXwindows1 timeout|(% style="width:93px" %)14(((
... ... @@ -1028,18 +1028,12 @@
1028 1028  )))
1029 1029  |(% style="width:163px" %)AT+RX1WTO=60|(% style="width:201px" %)Set RXwindows1 timeout|(% style="width:93px" %)OK
1030 1030  
1031 -(((
1032 -**AT+RX1TWO** is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
1033 -)))
910 +AT+RX1TWO is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
1034 1034  
1035 -[[image:image-20220526162535-1.png]]
912 +[[~[~[image:https://wiki.dragino.com/images/thumb/5/51/RX1WTO.JPG/600px-RX1WTO.JPG~|~|alt="RX1WTO.JPG" height="239" width="600"~]~]>>url:https://wiki.dragino.com/index.php/File:RX1WTO.JPG]]
1036 1036  
1037 -(((
1038 1038  Increasing thisvalue is equal to extending the time that the receiving window is opened, butthe corresponding power consumption will also increase. Properly increasingthis value can increase the success rate of the downlink.
1039 1039  
1040 -
1041 -)))
1042 -
1043 1043  == 7.21 Get or Set RXwindows2 timeout ==
1044 1044  
1045 1045  Feature:Get or Set the number of symbols to detect and timeout from RXwindow2(0 to 255).
... ... @@ -1048,7 +1048,7 @@
1048 1048  **AT Command: AT+RX2WTO**
1049 1049  {{/info}}
1050 1050  
1051 -(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
924 +(% style="background-color:#ffffcc; color:green; width:497.222px" %)
1052 1052  |=(% colspan="3" style="width: 494px;" %)AT+ RX2WTO
1053 1053  |(% style="width:190px" %)**Command Example**|(% style="width:199px" %)**Function**|(% style="width:104px" %)**Response**
1054 1054  |(% style="width:190px" %)AT+RX2WTO=?|(% style="width:199px" %)Get RXwindows2 timeout|(% style="width:104px" %)7(((
... ... @@ -1056,7 +1056,6 @@
1056 1056  )))
1057 1057  |(% style="width:190px" %)AT+RX2WTO=20|(% style="width:199px" %)Set RXwindows2 timeout|(% style="width:104px" %)OK
1058 1058  
1059 -
1060 1060  == 7.22 Setting up uplinkdwelltime (as923, au915) ==
1061 1061  
1062 1062  Feature: Get or Set uplinkdwelltime
... ... @@ -1065,7 +1065,7 @@
1065 1065  **AT Command: AT+DWELLT**
1066 1066  {{/info}}
1067 1067  
1068 -(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
940 +(% style="background-color:#ffffcc; color:green; width:497.222px" %)
1069 1069  |=(% colspan="3" style="width: 494px;" %)AT+DWELLT
1070 1070  |(% style="width:183px" %)**Command Example**|(% style="width:179px" %)**Function**|(% style="width:131px" %)**Response**
1071 1071  |(% style="width:183px" %)AT+DWELLT=?|(% style="width:179px" %)Get uplinkdwelltime|(% style="width:131px" %)1(((
... ... @@ -1084,7 +1084,6 @@
1084 1084  * **Example 1**: Downlink Payload: **2501** ~/~/ set uplinkdwelltime to 1
1085 1085  * **Example 2**: Downlink Payload: **2500** ~/~/ set uplinkdwelltime to 0
1086 1086  
1087 -
1088 1088  == 7.23 Set Packet Receiving Response Level ==
1089 1089  
1090 1090  Feature: Get or Set packet receiving response level. This feature is used to set compatible with different LoRaWAN servers. If RPL doesn;t match , user will see strange message in the server portal.
... ... @@ -1107,7 +1107,7 @@
1107 1107  **AT Command: AT+RPL**
1108 1108  {{/info}}
1109 1109  
1110 -(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
981 +(% style="background-color:#ffffcc; color:green; width:536.222px" %)
1111 1111  |=(% colspan="3" style="width: 533px;" %)AT+RPL
1112 1112  |(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1113 1113  |(% style="width:160px" %)AT+RPL=?|(% style="width:263px" %)Get packet receiving response level|(% style="width:109px" %)1(((
... ... @@ -1126,7 +1126,6 @@
1126 1126  * **Example 1**: Downlink Payload: **2101** ~/~/ set packet receiving response level to 1
1127 1127  * **Example 2**: Downlink Payload: **2102** ~/~/ set packet receiving response level to 2
1128 1128  
1129 -
1130 1130  = 8. AT Commands Combination =
1131 1131  
1132 1132  == 8.1 Set a fix RX2DR for downlink window ==
... ... @@ -1134,7 +1134,6 @@
1134 1134  * **AT+ADR=0 **~-~-> Disable ADR first
1135 1135  * **AT+RX2DR=xxxx** ~-~-> Set xxxx to your wanted DataRate
1136 1136  
1137 -
1138 1138  == 8.2 Use Downlink Command to set a fix uplink DR ==
1139 1139  
1140 1140  {{info}}
... ... @@ -1143,6 +1143,6 @@
1143 1143  
1144 1144  Same as:
1145 1145  
1146 -* AT+ADR=0  [[Reference>>||anchor="H7.1AdaptiveDataRate"]]
1147 -* AT+DR=5  [[Reference>>||anchor="H7.4DataRate"]]
1148 -* AT+TXP=0  [[Reference>>||anchor="H7.14TransmitPower"]]
1015 +* AT+ADR=0 [[Reference>>http://8.211.40.43:8080/xwiki/bin/view/End%20Device%20AT%20Commands%20and%20Downlink%20Command/#Adaptive_Data_Rate]]
1016 +* AT+DR=5 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Data_Rate]]
1017 +* AT+TXP=0 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Transmit_Power]]
image-20220526162535-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -149.4 KB
Content

Applications

Navigation

Copyright ©2010-2022 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0