Changes for page End Device AT Commands and Downlink Command
Last modified by kai on 2024/09/06 10:00
Summary
-
Page properties (1 modified, 0 added, 0 removed)
-
Attachments (0 modified, 0 added, 2 removed)
Details
- Page properties
-
- Content
-
... ... @@ -1,9 +1,8 @@ 1 - **Contents：**1 +Contens 2 2 3 3 {{toc/}} 4 4 5 5 6 - 7 7 = 1. Introduction = 8 8 9 9 Dragino LoRaWAN End Node support two types of AT Commands and Downlink Commands: ... ... @@ -11,93 +11,48 @@ 11 11 * **Common Commands:** They should be available for each sensor, such as: change uplink interval, reset device. 12 12 * **Sensor Related Commands:** Only for special sensor, such as control relay, poll RS485 device. 13 13 14 -((( 15 15 **This page shows the common commands since Dragino LoRaWAN stack DR-LWS-005. Make sure the end node support stack higher than DR-LWS-005 before checking this page.** 16 16 17 -))) 18 18 19 19 = 2. How to use AT Commands or Downlink command = 20 20 21 21 * For AT Command , See Devices User Manual for Device. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]] 22 22 * For LoRaWAN Downlink: The gateway transfer downlink command in HEX format. This page shows the HEX format downlink code for each command. but some servers use base64 as downlink code. Below are reference for how to use downlink command: 23 -** Use HEX format to send a downlink: [[TTN v3>>Notes 24 -** Use Base64 format to send a downlink: [[Chirpstack>>Notes 25 -** See use note for more serves [[Servers Note>>doc :Main.WebHome]](IoT LoRaWANServer)20 +** Use HEX format to send a downlink: [[TTN v3>>url:https://wiki.dragino.com/index.php/Notes_for_TTN#Send_Downlink_message]] 21 +** Use Base64 format to send a downlink: [[Chirpstack>>url:https://wiki.dragino.com/index.php/Notes_for_ChirpStack#Downlink]]. 22 +** See use note for more serves [[Servers Note>>url:https://wiki.dragino.com/index.php/Main_Page#Use_Note_for_Server]] 26 26 27 27 = 3. Support End Node and firmware version = 28 28 29 -(% border="1" style="background-color:#ffffcc; color:green; width:966px" %) 30 -|=(% colspan="3" style="width: 963px;" %)((( 31 -Dragino STM32 base hardware Firmware / LoRaWAN stack list 32 -))) 33 -|(% style="width:187px" %)((( 34 -**Model** 35 -)))|(% style="width:330px" %)((( 36 -**Description** 37 -)))|(% style="width:445px" %)((( 38 -**Firmware Version <~-~-> Stack Version** 39 -))) 40 -|(% style="width:187px" %)((( 41 -[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]], 42 -)))|(% style="width:330px" %)((( 43 -Open Source Generic LoRaWAN Sensor Node 44 -)))|(% style="width:445px" %)((( 45 -((( 46 -LSN50 v1.6.0 <~-~-> DR-LWS-003; 47 -))) 48 48 49 -((( 50 -((( 27 +(% style="background-color:#ffffcc; color:green; width:1039.22px" %) 28 +|(% colspan="3" style="width:1036px" %)** Dragino STM32 base hardware Firmware / LoRaWAN stack list** 29 +|(% style="width:216px" %)**Model**|(% style="width:346px" %)**Description**|(% style="width:472px" %)**Firmware Version <~-~-> Stack Version** 30 +|(% style="width:216px" %)[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],|(% style="width:346px" %)Open Source Generic LoRaWAN Sensor Node|(% style="width:472px" %)LSN50 v1.6.0 <~-~-> DR-LWS-003;((( 51 51 LSN50 v1.7.0 <~-~-> DR-LWS-005; ~-~-> Support since this version 52 52 ))) 53 -))) 54 -))) 55 -|(% style="width:187px" %)((( 56 -[[LGT92>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/142-lgt-92.html]], 57 -)))|(% style="width:330px" %)((( 58 -LoRaWAN GPS Tracker 59 -)))|(% style="width:445px" %)((( 60 -((( 61 -LGT92 v1.6.3 <~-~-> DR-LWS-003; 62 -))) 33 +|(% style="width:216px" %) |(% style="width:346px" %) |(% style="width:472px" %) 34 +|(% style="width:216px" %) |(% style="width:346px" %) |(% style="width:472px" %) 35 +|(% style="width:216px" %) |(% style="width:346px" %) |(% style="width:472px" %) 36 +|(% style="width:216px" %) |(% style="width:346px" %) |(% style="width:472px" %) 63 63 64 -((( 65 -((( 38 + 39 + 40 +(% border="1" style="background-color:#ffffcc; color:green; width:942.222px" %) 41 +|=(% colspan="3" style="width: 939px;" %) Dragino STM32 base hardware Firmware / LoRaWAN stack list 42 +|(% style="width:187px" %)**Model**|(% style="width:306px" %)**Description**|(% style="width:443px" %)**Firmware Version <~-~-> Stack Version** 43 +|(% style="width:187px" %)[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],|(% style="width:306px" %)Open Source Generic LoRaWAN Sensor Node|(% style="width:443px" %)LSN50 v1.6.0 <~-~-> DR-LWS-003;((( 44 +LSN50 v1.7.0 <~-~-> DR-LWS-005; ~-~-> Support since this version 45 +))) 46 +|(% style="width:187px" %)[[LGT92>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/142-lgt-92.html]],|(% style="width:306px" %)LoRaWAN GPS Tracker|(% style="width:443px" %)LGT92 v1.6.3 <~-~-> DR-LWS-003;((( 66 66 LGT92 v1.6.4 <~-~-> DR-LWS-005;~-~-> Support since this version 67 67 ))) 68 -))) 69 -))) 70 -|(% style="width:187px" %)((( 71 -[[LBT1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/165-lbt1.html]], 72 -)))|(% style="width:330px" %)((( 73 -LoRaWAN BLE Indoor Tracker 74 -)))|(% style="width:445px" %)((( 75 -LBT1 v1.0 <~-~-> DR-LWS-005; 76 -))) 77 -|(% style="width:187px" %)((( 78 -[[RS485-LN>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/154-rs485-ln.html]], 79 -)))|(% style="width:330px" %)((( 80 -LoRaWAN RS485 Modbus Converter 81 -)))|(% style="width:445px" %)((( 82 -RS485-LN v1.3 <~-~-> DR-LWS-005; 83 -))) 84 -|(% style="width:187px" %)((( 85 -[[LHT65>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/151-lht65.html]], 86 -)))|(% style="width:330px" %)((( 87 -LoRaWAN Temperature & Humidity Sensor 88 -)))|(% style="width:445px" %)((( 89 -((( 90 -LHT65 v1.7 <~-~-> DR-LWS-003; 91 -))) 92 - 93 -((( 94 -((( 49 +|(% style="width:187px" %)[[LBT1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/165-lbt1.html]],|(% style="width:306px" %)LoRaWAN BLE Indoor Tracker|(% style="width:443px" %)LBT1 v1.0 <~-~-> DR-LWS-005; 50 +|(% style="width:187px" %)[[RS485-LN>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/154-rs485-ln.html]],|(% style="width:306px" %)LoRaWAN RS485 Modbus Converter|(% style="width:443px" %)RS485-LN v1.3 <~-~-> DR-LWS-005; 51 +|(% style="width:187px" %)[[LHT65>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/151-lht65.html]],|(% style="width:306px" %)LoRaWAN Temperature & Humidity Sensor|(% style="width:443px" %)LHT65 v1.7 <~-~-> DR-LWS-003;((( 95 95 LHT65 v1.8.0 <~-~-> DR-LWS-005;~-~-> Support since this version 96 96 ))) 97 -))) 98 -))) 99 99 100 - 101 101 = 4. System Management Commands = 102 102 103 103 == 4.1 Change Uplink Interval == ... ... @@ -106,11 +106,11 @@ 106 106 107 107 (% class="box infomessage" %) 108 108 ((( 109 - **AT Command: AT+TDC**63 +AT Command: AT+TDC 110 110 ))) 111 111 112 112 (% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %) 113 -|=(% colspan="3" style="width: 724px;" %)AT+TDC 67 +|=(% colspan="3" style="width: 724px;" %) AT+TDC 114 114 |(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response** 115 115 |(% style="width:165px" %)AT+TDC=?|(% style="width:227px" %)Show current transmit Interval|(% style="width:329px" %)30000((( 116 116 OK ... ... @@ -121,33 +121,27 @@ 121 121 Set transmit interval to 60000ms = 60 seconds 122 122 ))) 123 123 124 -{{info}} 125 125 **Downlink Command: 0x01** 126 -{{/info}} 127 127 128 -((( 129 129 Format: Command Code (0x01) followed by 3 bytes time value. 130 -))) 131 131 132 -((( 133 133 If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01. 134 -))) 135 135 136 136 * **Example 1**: Downlink Payload:** 0100001E** ~/~/ Set Transmit Interval (TDC) = 30 seconds 137 137 * **Example 2**: Downlink Payload:** 0100003C** ~/~/ Set Transmit Interval (TDC) = 60 seconds 138 138 139 - 140 140 == 4.2 Reboot End Node == 141 141 142 142 Feature: Reboot End Node to perform a new OTAA or ABP Join. 143 143 144 144 {{info}} 145 - **AT Command: ATZ**92 +AT Command: ATZ 146 146 {{/info}} 147 147 148 148 (% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %) 149 -|=(% colspan="3" %)ATZ: Trig a reset of the MCU 96 +|=(% colspan="3" %) ATZ: Trig a reset of the MCU 150 150 |**Command Example**|**Function**|**Response** 98 +~)~)~) 151 151 |ATZ|Reset MCU|((( 152 152 Device reset and show booting info 153 153 ... ... @@ -162,56 +162,35 @@ 162 162 <followed by the Tx and Rx information> 163 163 ))) 164 164 165 -{{info}} 166 -**Downlink Command: 0x04** 167 -{{/info}} 113 +Downlink Command: 0x04 168 168 169 -((( 170 170 Format: Command Code (0x04) followed by FF. 171 -))) 172 172 173 -((( 174 -If the downlink payload=**04FF**, the end node will reboot. 117 +If the downlink payload=04FF, the end node will reboot. 175 175 176 - 177 -))) 178 - 179 179 == 4.3 Reset to factory Default == 180 180 181 181 Feature: Reset the parameters to Factory Default, factory default value depends on the firmware settings, the OTAA and ABP keys will reserve after this command. 182 182 183 -{{info}} 184 -**AT Command: AT+FDR** 185 -{{/info}} 123 +AT Command: AT+FDR 186 186 187 -(% border="1" style="background-color:#ffffcc; color:green; width:831.222px" %) 188 -|=(% colspan="3" style="width: 828px;" %)Reset to factory default 189 -|(% style="width:181px" %)**Command Example**|(% style="width:181px" %)**Function**|(% style="width:465px" %)**Response** 190 -|(% style="width:181px" %)AT+FDR|(% style="width:181px" %)Reset to factory default|(% style="width:465px" %)((( 191 -Device reset to factory default parameters and show booting info 125 +|=(% colspan="3" %)Reset to factory default 126 +|**Command Example**|**Function**|**Response** 127 +|AT+FDR|Reset to factory default|Device reset to factory default parameters and show booting info 192 192 193 -LSN50 Device/LoRa ST Module 194 - 129 +{{{LSN50 Device/LoRa ST Module 195 195 Image Version: XX 196 - 197 197 Frequency Band: XX 198 - 199 199 DevEui= XX XX XX XX XX XX XX XX 200 - 201 201 Please set the parameters or reset Device to apply change 202 - )))134 +}}} 203 203 204 -{{info}} 205 -**Downlink Command: 0x04** 206 -{{/info}} 207 207 208 -((( 137 +Downlink Command: 0x04 138 + 209 209 Format: Command Code (0x04) followed by FE. 210 -))) 211 211 212 -((( 213 -If the downlink payload=**04FE**, Reset Parameters to Factory Default, Keys Reserve. 214 -))) 141 +If the downlink payload=04FE, Reset Parameters to Factory Default, Keys Reserve. 215 215 216 216 217 217 == 4.4 Show Firmware Version == ... ... @@ -218,42 +218,30 @@ 218 218 219 219 Feature: Show firmware version. No downlink command yet. 220 220 221 -{{info}} 222 -**AT Command: AT+VER** 223 -{{/info}} 148 +AT Command: AT+VER 224 224 225 -(% border="1" style="background-color:#ffffcc; color:green; width:586px" %) 226 -|=(% colspan="3" style="width: 583px;" %)AT+VER: Image Version and Frequency Band 227 -|(% style="width:170px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:113px" %)**Response** 228 -|(% style="width:170px" %)AT+VER=?|(% style="width:300px" %)Show Image version and Frequency Band|(% style="width:113px" %)((( 229 -1.3 EU868 150 +|=(% colspan="3" %)AT+VER: Image Version and Frequency Band 151 +|**Command Example**|**Function**|**Response** 152 +|AT+VER=?|Show Image version and Frequency Band| 230 230 154 +{{{1.3 EU868 231 231 OK 232 - )))156 +}}} 233 233 234 -{{info}} 235 -**Downlink Command: 0x26 (Valid in 006 stack)** 236 -{{/info}} 237 237 238 -((( 159 +Downlink Command: 0x26 (Valid in 006 stack) 160 + 239 239 Downlink Format: 0x26 240 -))) 241 241 242 -((( 243 243 Device will reply with firmware version info, device info. frequency band info. detail please check device user manual. Total 5 bytes Example: If device is of firmware version 1.1.0 Upload: xx ~-~- yy ~-~- zz ~-~- 110 total 5 bytes 244 -))) 245 245 246 -((( 247 -**xx: Software Type:** 248 -))) 165 +xx: Software Type: 249 249 250 250 * 0x00 01: LGT92 Version 251 251 * 0x00 02: LBT1 252 252 * 0x00 03: LSE01/LDDS75/LDDS20/LSPH01/LLMS01/LSNPK01 253 253 254 -((( 255 -**yy: Frequency Band:** 256 -))) 171 +yy: Frequency Band: 257 257 258 258 * 0x01: EU868 259 259 * 0x02: US915 ... ... @@ -266,9 +266,7 @@ 266 266 * 0x09: AS923-2 267 267 * 0xa0: AS923-3 268 268 269 -((( 270 -**zz: Subband** 271 -))) 184 +zz: Subband 272 272 273 273 firmware version: v1.1.0 ~-~-> 110 274 274 ... ... @@ -277,26 +277,19 @@ 277 277 278 278 Feature: Show All configure. No downlink command yet. 279 279 280 -{{info}} 281 -**AT Command: AT+CFG** 282 -{{/info}} 193 +AT Command: AT+CFG 283 283 284 -(% border="1" style="background-color:#ffffcc; color:green; width:599.222px" %) 285 -|=(% colspan="3" style="width: 596px;" %)AT+CFG: Print all configurations 286 -|(% style="width:160px" %)**Command Example**|(% style="width:154px" %)**Function**|(% style="width:280px" %)**Response** 287 -|(% style="width:160px" %)AT+CFG|(% style="width:154px" %)Show all configures|(% style="width:280px" %)((( 288 -AT+DEUI = XX XX XX XX XX XX XX XX 195 +|=(% colspan="3" %)AT+CFG: Print all configurations 196 +|**Command Example**|**Function**|**Response** 197 +|AT+CFG|Show all configures| 289 289 199 +{{{AT+DEUI = XX XX XX XX XX XX XX XX 290 290 AT+DADDR=XXXXXXXX 291 - 292 292 ………. 293 - 294 294 AT+RX2WTO=X 295 - 296 296 AT+CHS=868100000 297 - 298 298 OK 299 - )))205 +}}} 300 300 301 301 302 302 = 5. Keys, IDs and EUIs management = ... ... @@ -305,50 +305,40 @@ 305 305 306 306 Feature: Get or Set the Application EUI. 307 307 308 -{{info}} 309 -**AT Command: AT+APPEUI** 310 -{{/info}} 214 +AT Command: AT+APPEUI 311 311 312 -(% border="1" style="background-color:#ffffcc; color:green; width:686.222px" %) 313 -|=(% colspan="3" style="width: 683px;" %)AT+APPEUI 314 -|(% style="width:305px" %)**Command Example**|(% style="width:186px" %)**Function**|(% style="width:191px" %)**Response** 315 -|(% style="width:305px" %)AT+APPEUI=?|(% style="width:186px" %)Get the Application EUI|(% style="width:191px" %)00 b3 d5 00 00 00 00 00((( 216 +|=(% colspan="3" %)AT+APPEUI 217 +|**Command Example**|**Function**|**Response** 218 +|AT+APPEUI=?|Get the Application EUI|00 b3 d5 00 00 00 00 00((( 316 316 OK 317 317 ))) 318 -| (% style="width:305px" %)AT+APPEUI=00 b3 d5 7e f0 00 4d 34|(% style="width:186px" %)Set the Application EUI|(% style="width:191px" %)OK221 +|AT+APPEUI=00 b3 d5 7e f0 00 4d 34|Set the Application EUI|OK 319 319 320 - 321 321 == 5.2 Application Key == 322 322 323 323 Feature: Get or Set the Application Key. 324 324 325 -{{info}} 326 -**AT Command: AT+APPKEY** 327 -{{/info}} 227 +AT Command: AT+APPKEY 328 328 329 -(% border="1" style="background-color:#ffffcc; color:green; width:976.222px" %) 330 -|=(% colspan="3" style="width: 973px;" %)AT+APPKEY 331 -|(% style="width:441px" %)**Command Example**|(% style="width:180px" %)**Function**|(% style="width:350px" %)**Response** 332 -|(% style="width:441px" %)AT+APPKEY=?|(% style="width:180px" %)Get the Application Key|(% style="width:350px" %)00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35((( 229 +|=(% colspan="3" %)AT+APPKEY 230 +|**Command Example**|**Function**|**Response** 231 +|AT+APPKEY=?|Get the Application Key|00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35((( 333 333 OK 334 334 ))) 335 -| (% style="width:441px" %)AT+APPKEY=00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35|(% style="width:180px" %)Set the Application Key|(% style="width:350px" %)OK234 +|AT+APPKEY=00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35|Set the Application Key.|OK 336 336 337 337 == 5.3 Application Session Key == 338 338 339 339 Feature: Get or Set the Application Session Key. 340 340 341 -{{info}} 342 -**AT Command: AT+APPSKEY** 343 -{{/info}} 240 +AT Command: AT+APPSKEY 344 344 345 -(% border="1" style="background-color:#ffffcc; color:green; width:1040.22px" %) 346 -|=(% colspan="3" style="width: 1037px;" %)AT+APPSKEY 347 -|(% style="width:451px" %)**Command Example**|(% style="width:231px" %)**Function**|(% style="width:354px" %)**Response** 348 -|(% style="width:451px" %)AT+APPSKEY=?|(% style="width:231px" %)Get the Application Session Key|(% style="width:354px" %)00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2((( 242 +|=(% colspan="3" %)AT+APPSKEY 243 +|**Command Example**|**Function**|**Response** 244 +|AT+APPSKEY=?|Get the Application Session Key|00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2((( 349 349 OK 350 350 ))) 351 -| (% style="width:451px" %)AT+APPSKEY=00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2|(% style="width:231px" %)Set the Application Session Key|(% style="width:354px" %)(While Error in format, return AT_PARAM_ERROR)(((247 +|AT+APPSKEY=00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2|Set the Application Session Key.|(While Error in format, return AT_PARAM_ERROR)((( 352 352 OK 353 353 ))) 354 354 ... ... @@ -356,35 +356,29 @@ 356 356 357 357 Feature: Get or Set the Device Address. 358 358 359 -{{info}} 360 -**AT Command: AT+DADDR** 361 -{{/info}} 255 +AT Command: AT+DADDR 362 362 363 -(% border="1" style="background-color:#ffffcc; color:green; width:795.222px" %) 364 -|=(% colspan="3" style="width: 792px;" %)AT+DADDR 365 -|(% style="width:192px" %)**Command Example**|(% style="width:241px" %)**Function**|(% style="width:359px" %)**Response** 366 -|(% style="width:192px" %)AT+DADDR=?|(% style="width:241px" %)Get the Application Session Key.|(% style="width:359px" %)(While Error in format, return AT_PARAM_ERROR)((( 257 +|=(% colspan="3" %)AT+DADDR 258 +|**Command Example**|**Function**|**Response** 259 +|AT+DADDR=?|Get the Application Session Key.|(While Error in format, return AT_PARAM_ERROR)((( 367 367 A8 40 41 FF 368 368 369 369 OK 370 370 ))) 371 -| (% style="width:192px" %)AT+DADDR=A8 40 41 FF|(% style="width:241px" %)Set the Application Session Key.|(% style="width:359px" %)OK264 +|AT+DADDR=A8 40 41 FF|Set the Application Session Key.|OK 372 372 373 373 == 5.5 Device EUI == 374 374 375 375 Feature: Get or Set the Device EUI. 376 376 377 -{{info}} 378 -**AT Command: AT+DEUI** 379 -{{/info}} 270 +AT Command: AT+DEUI 380 380 381 -(% border="1" style="background-color:#ffffcc; color:green; width:1035.22px" %) 382 -|=(% colspan="3" style="width: 1032px;" %)AT+DEUI 383 -|(% style="width:250px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:634px" %)**Response** 384 -|(% style="width:250px" %)AT+DEUI=?|(% style="width:147px" %)Get the Device EUI.|(% style="width:634px" %)00 44 34 22 33 45 55 55((( 272 +|=(% colspan="3" %)AT+DEUI 273 +|**Command Example**|**Function**|**Response** 274 +|AT+DEUI=?|Get the Device EUI.|00 44 34 22 33 45 55 55((( 385 385 OK 386 386 ))) 387 -| (% style="width:250px" %)AT+DEUI=A8 40 41 FF FF 12 34 56|(% style="width:147px" %)Set the Device EUI.|(% style="width:634px" %)(System will write new value to Device EUI,While Error in format, return AT_PARAM_ERROR)(((277 +|AT+DEUI=A8 40 41 FF FF 12 34 56|Set the Device EUI.|(System will write new value to Device EUI,While Error in format, return AT_PARAM_ERROR)((( 388 388 OK 389 389 ))) 390 390 ... ... @@ -392,33 +392,27 @@ 392 392 393 393 Feature: Get or Set the Network ID.(You can enter this command change only after successful network connection) 394 394 395 -{{info}} 396 -**AT Command: AT+NWKID** 397 -{{/info}} 285 +AT Command: AT+NWKID 398 398 399 -(% border="1" style="background-color:#ffffcc; color:green; width:448.222px" %) 400 -|=(% colspan="3" style="width: 445px;" %)AT+NWKID 401 -|(% style="width:191px" %)**Command Example**|(% style="width:153px" %)**Function**|(% style="width:101px" %)**Response** 402 -|(% style="width:191px" %)AT+NWKID=?|(% style="width:153px" %)Get the Network ID.|(% style="width:101px" %)a8 40 41 ff((( 287 +|=(% colspan="3" %)AT+NWKID 288 +|**Command Example**|**Function**|**Response** 289 +|AT+NWKID=?|Get the Network ID.|a8 40 41 ff((( 403 403 OK 404 404 ))) 405 -| (% style="width:191px" %)AT+NWKID=A8 40 41 FF|(% style="width:153px" %)Set the Network ID.|(% style="width:101px" %)OK292 +|AT+NWKID=A8 40 41 FF|Set the Network ID.|OK 406 406 407 407 == 5.7 Network Session Key == 408 408 409 409 Feature: Get or Set the Network Session Key 410 410 411 -{{info}} 412 -**AT Command: AT+NWKSKEY** 413 -{{/info}} 298 +AT Command: AT+NWKSKEY 414 414 415 -(% border="1" style="background-color:#ffffcc; color:green; width:1017.22px" %) 416 -|=(% colspan="3" style="width: 1014px;" %)AT+NWKSKEY 417 -|(% style="width:455px" %)**Command Example**|(% style="width:215px" %)**Function**|(% style="width:343px" %)**Response** 418 -|(% style="width:455px" %)AT+NWKSKEY=?|(% style="width:215px" %)Get the Network Session Key.|(% style="width:343px" %)00 4f 19 25 52 ce 97 09 d7 fa 84 71 db 51 02 92((( 300 +|=(% colspan="3" %)AT+NWKSKEY 301 +|**Command Example**|**Function**|**Response** 302 +|AT+NWKSKEY=?|Get the Network Session Key.|00 4f 19 25 52 ce 97 09 d7 fa 84 71 db 51 02 92((( 419 419 OK 420 420 ))) 421 -| (% style="width:455px" %)AT+NWKSKEY=A8 40 41 FF FF 12 34 56 00 01 02 04 05 06 06 07|(% style="width:215px" %)Set the Network Session Key.|(% style="width:343px" %)OK305 +|AT+NWKSKEY=A8 40 41 FF FF 12 34 56 00 01 02 04 05 06 06 07|Set the Network Session Key.|OK 422 422 423 423 = 6. Joining and sending date on LoRaWAN network = 424 424 ... ... @@ -426,18 +426,15 @@ 426 426 427 427 Feature: Get or Set the confirmation mode (0-1). 428 428 429 -{{info}} 430 -**AT Command: AT+CFM** 431 -{{/info}} 313 +AT Command: AT+CFM 432 432 433 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %) 434 -|=(% colspan="3" style="width: 707px;" %)AT+CFM 435 -|(% style="width:155px" %)**Command Example**|(% style="width:205px" %)**Function**|(% style="width:346px" %)**Response** 436 -|(% style="width:155px" %)AT+CFM=?|(% style="width:205px" %)Get the confirmation mode|(% style="width:346px" %)0((( 315 +|=(% colspan="3" %)AT+CFM 316 +|**Command Example**|**Function**|**Response** 317 +|AT+CFM=?|Get the confirmation mode|0((( 437 437 OK 438 438 ))) 439 -| (% style="width:155px" %)AT+CFM=1|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)OK440 -| (% style="width:155px" %)AT+CFM=2|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)While Error in format, return AT_PARAM_ERROR320 +|AT+CFM=1|Set the confirmation mode|OK 321 +|AT+CFM=2|Set the confirmation mode|While Error in format, return AT_PARAM_ERROR 441 441 442 442 Downlink Command: 0x05 443 443 ... ... @@ -452,126 +452,96 @@ 452 452 453 453 Feature: Get confirmation status of the last AT+SEND (0-1). 454 454 455 -{{info}} 456 -**AT Command: AT+CFS** 457 -{{/info}} 336 +AT Command: AT+CFS 458 458 459 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %) 460 -|=(% colspan="3" style="width: 531px;" %)AT+CFS 461 -|(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:178px" %)**Response** 462 -|(% style="width:156px" %)AT+CFS=?|(% style="width:193px" %)Get confirmation status|(% style="width:178px" %)0((( 338 +|=(% colspan="3" %)AT+CFS 339 +|**Command Example**|**Function**|**Response** 340 +|AT+CFS=?|Get confirmation status|0((( 463 463 OK 464 464 ))) 465 465 466 - 467 - 468 468 == 6.3 Join LoRa® Network == 469 469 470 470 Feature: Join network. 471 471 472 -{{info}} 473 -**AT Command: AT+JOIN** 474 -{{/info}} 348 +AT Command: AT+JOIN 475 475 476 -(% border="1" style="background-color:#ffffcc; color:green; width:647.222px" %) 477 -|=(% colspan="3" style="width: 644px;" %)AT+JOIN 478 -|(% style="width:163px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:334px" %)**Response** 479 -|(% style="width:163px" %)AT+JOIN ?|(% style="width:147px" %)Get imformation.|(% style="width:334px" %)AT+JOIN: Join network((( 350 +|=(% colspan="3" %)AT+JOIN 351 +|**Command Example**|**Function**|**Response** 352 +|AT+JOIN ?|Get imformation.|AT+JOIN: Join network((( 480 480 OK 481 481 482 482 While Error in format, return AT_BUSY_ERROR 483 483 ))) 484 484 485 - 486 486 == 6.4 LoRa® Network Join Mode == 487 487 488 488 Feature: Get or Set the Network Join Mode. (0: ABP, 1: OTAA). 489 489 490 -{{info}} 491 -**AT Command: AT+NJM** 492 -{{/info}} 362 +AT Command: AT+NJM 493 493 494 -(% border="1" style="background-color:#ffffcc; color:green; width:753.222px" %) 495 -|=(% colspan="3" style="width: 750px;" %)AT+NJM 496 -|(% style="width:162px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:361px" %)**Response** 497 -|(% style="width:162px" %)AT+NJM=?|(% style="width:227px" %)Get the Network Join Mode|(% style="width:361px" %)1((( 364 +|=(% colspan="3" %)AT+NJM 365 +|**Command Example**|**Function**|**Response** 366 +|AT+NJM=?|Get the Network Join Mode|1((( 498 498 OK 499 499 ))) 500 -| (% style="width:162px" %)AT+NJM=0|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)OK501 -| (% style="width:162px" %)AT+NJM=2|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)While Error in format, return AT_PARAM_ERROR369 +|AT+NJM=0|Set the Network Join Mode|OK 370 +|AT+NJM=2|Set the Network Join Mode|While Error in format, return AT_PARAM_ERROR 502 502 503 -{{info}} 504 -**Downlink Command: 0x20** 505 -{{/info}} 372 +Downlink Command: 0x20 506 506 507 507 Format: Command Code (0x20) followed by 1 bytes mode value. 508 508 509 509 If the downlink payload=2000, it means set the Network Join Mode, while type code is 20. 510 510 511 -* **Example 1:**Downlink Payload:**2000**~/~/ Set AT+NJM=O512 -* **Example 2:**Downlink Payload:**2001**~/~/ Set AT+NJM=1378 +* Example 1: Downlink Payload: 2000 ~/~/ Set AT+NJM=O 379 +* Example 2: Downlink Payload: 2001 ~/~/ Set AT+NJM=1 513 513 514 - 515 515 == 6.5 LoRa® Network Join Status == 516 516 517 517 Feature: LoRa® Network Join Status. 518 518 519 -{{info}} 520 -**AT Command: AT+NJS** 521 -{{/info}} 385 +AT Command: AT+NJS 522 522 523 -(% border="1" style="background-color:#ffffcc; color:green; width:498.222px" %) 524 -|=(% colspan="3" style="width: 495px;" %)AT+NJS 525 -|(% style="width:169px" %)**Command Example**|(% style="width:164px" %)**Function**|(% style="width:161px" %)**Response** 526 -|(% style="width:169px" %)AT+NJS=?|(% style="width:164px" %)Get the join status.|(% style="width:161px" %)0((( 387 +|=(% colspan="3" %)AT+NJS 388 +|**Command Example**|**Function**|**Response** 389 +|AT+NJS=?|Get the join status.|0((( 527 527 OK 528 528 ))) 529 529 530 - 531 531 == 6.6 Print Last Received Data in Raw Format == 532 532 533 533 Feature: Print Last Received Data in Raw Format<port:data>. 534 534 535 -{{info}} 536 -**AT Command: AT+RECV** 537 -{{/info}} 397 +AT Command: AT+RECV 538 538 539 -(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %) 540 -|=(% colspan="3" style="width: 584px;" %)AT+RECV 541 -|(% style="width:161px" %)**Command Example**|(% style="width:272px" %)**Function**|(% style="width:150px" %)**Response** 542 -|(% style="width:161px" %)AT+RECV=?|(% style="width:272px" %)print last received data in raw format.|(% style="width:150px" %)0:((( 399 +|=(% colspan="3" %)AT+RECV 400 +|**Command Example**|**Function**|**Response** 401 +|AT+RECV=?|print last received data in raw format.|0:((( 543 543 OK 544 544 ))) 545 545 546 - 547 547 == 6.7 Print Last Received Data in Binary Format == 548 548 549 549 Feature: Print Last Received Data in Binary Format<port:data>. 550 550 551 -{{info}} 552 -**AT Command: AT+RECVB** 553 -{{/info}} 409 +AT Command: AT+RECVB 554 554 555 -(% border="1" style="background-color:#ffffcc; color:green; width:793.222px" %) 556 -|=(% colspan="3" style="width: 790px;" %)AT+RECVB 557 -|(% style="width:173px" %)**Command Example**|(% style="width:497px" %)**Function**|(% style="width:120px" %)**Response** 558 -|(% style="width:173px" %)AT+RECVB=?|(% style="width:497px" %)print last received data in binary format (with hexadecimal values).|(% style="width:120px" %)2: 0010((( 411 +|=(% colspan="3" %)AT+RECVB 412 +|**Command Example**|**Function**|**Response** 413 +|AT+RECVB=?|print last received data in binary format (with hexadecimal values).|2: 0010((( 559 559 OK 560 560 ))) 561 561 562 - 563 563 == 6.8 Send Text Data == 564 564 565 565 Feature: Send Text Data<port:data>. 566 566 567 -{{info}} 568 -**AT Command: AT+SEND** 569 -{{/info}} 421 +AT Command: AT+SEND 570 570 571 -(% border="1" style="background-color:#ffffcc; color:green; width:991.222px" %) 572 -|=(% colspan="3" style="width: 988px;" %)AT+SEND 573 -|(% style="width:201px" %)**Command Example**|(% style="width:340px" %)**Function**|(% style="width:446px" %)**Response** 574 -|(% style="width:201px" %)AT+SEND=12:hello world|(% style="width:340px" %)Send text data along with the application port.|(% style="width:446px" %)OK((( 423 +|=(% colspan="3" %)AT+SEND 424 +|**Command Example**|**Function**|**Response** 425 +|AT+SEND=12:hello world|Send text data along with the application port.|OK((( 575 575 While Error in format, return 576 576 577 577 AT_BUSY_ERROR/AT_BUSY_ERROR/AT_NO_NETWORK_JOINED ... ... @@ -579,26 +579,21 @@ 579 579 580 580 ))) 581 581 582 - 583 583 == 6.9 Send Hexadecimal Data == 584 584 585 585 Feature: Send hexadecimal data along with the application port. 586 586 587 -{{info}} 588 -**AT Command: AT+SENDB** 589 -{{/info}} 437 +AT Command: AT+SENDB 590 590 591 -(% border="1" style="background-color:#ffffcc; color:green; width:1120.22px" %) 592 -|=(% colspan="3" style="width: 1117px;" %)AT+SENDB 593 -|(% style="width:257px" %)**Command Example**|(% style="width:406px" %)**Function**|(% style="width:453px" %)**Response** 594 -|(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)OK 595 -|(% style="width:257px" %)AT+SENDB=abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)While Error in format, return((( 439 +|=(% colspan="3" %)AT+SENDB 440 +|**Command Example**|**Function**|**Response** 441 +|AT+SENDB=12:abcdef0123456789|Send hexadecimal data along with the application port.|OK 442 +|AT+SENDB=abcdef0123456789|Send hexadecimal data along with the application port.|While Error in format, return((( 596 596 AT_PARAM_ERROR AT_BUSY_ERROR/AT_NO_NETWORK_JOINED 597 597 598 598 599 599 ))) 600 600 601 - 602 602 = 7. LoRaWAN network management = 603 603 604 604 == 7.1 Adaptive Data Rate == ... ... @@ -605,289 +605,231 @@ 605 605 606 606 Feature: Get or Set the Adaptive Data Rate setting. (0: off, 1: on). 607 607 608 -{{info}} 609 -**AT Command: AT+ADR** 610 -{{/info}} 611 611 612 -(% border="1" style="background-color:#ffffcc; color:green; width:683.222px" %) 613 -|=(% colspan="3" style="width: 680px;" %)AT+ADR 614 -|(% style="width:162px" %)**Command Example**|(% style="width:266px" %)**Function**|(% style="width:250px" %)**Response** 615 -|(% style="width:162px" %)AT+ADR=?|(% style="width:266px" %)Get the Adaptive Data Rate setting.|(% style="width:250px" %)1((( 455 +AT Command: AT+ADR 456 + 457 +|=(% colspan="3" %)AT+ADR 458 +|**Command Example**|**Function**|**Response** 459 +|AT+ADR=?|Get the Adaptive Data Rate setting.|1((( 616 616 OK 617 617 ))) 618 -| (% style="width:162px" %)AT+ADR=0|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:250px" %)OK619 -| (% style="width:162px" %)AT+ADR=2|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:250px" %)While Error in format, return(((462 +|AT+ADR=0|Set the Adaptive Data Rate setting.|OK 463 +|AT+ADR=2|Set the Adaptive Data Rate setting.|While Error in format, return((( 620 620 AT_PARAM_ERROR 621 621 ))) 622 622 623 -{{info}} 624 -**Downlink Command: 0x22** 625 -{{/info}} 467 +Downlink Command: 0x22 626 626 627 627 628 628 If the downlink payload=2201, it means setting the adaptive data rate to 1, while type code is 22. 629 629 630 -* **Example 1**: Downlink Payload:**2201**~/~/ Set AT+ADR=1.631 -* **Example 2**: Downlink Payload:**2200FFFF**~/~/ Set AT+ADR=0.472 +* Example 1: Downlink Payload: 2201 ~/~/ Set AT+ADR=1. 473 +* Example 2: Downlink Payload: 2200FFFF ~/~/ Set AT+ADR=0. 632 632 633 - 634 634 == 7.2 LoRa® Class == 635 635 636 636 Feature: Get or Set the Device Class(Currently only support class A, class C). 637 637 638 -{{info}} 639 -**AT Command:AT+CLASS** 640 -{{/info}} 479 +AT Command:AT+CLASS 641 641 642 -(% border="1" style="background-color:#ffffcc; color:green; width:507.222px" %) 643 -|=(% colspan="3" style="width: 504px;" %)AT+CLASS 644 -|(% style="width:163px" %)**Command Example**|(% style="width:166px" %)**Function**|(% style="width:175px" %)**Response** 645 -|(% style="width:163px" %)AT+CLASS=?|(% style="width:166px" %)Get the Device Class.|(% style="width:175px" %)A((( 481 +|=(% colspan="3" %)AT+CLASS 482 +|**Command Example**|**Function**|**Response** 483 +|AT+CLASS=?|Get the Device Class.|A((( 646 646 OK 647 647 ))) 648 -| (% style="width:163px" %)AT+CLASS=C|(% style="width:166px" %)Set the Device Class.|(% style="width:175px" %)OK(((486 +|AT+CLASS=C|Set the Device Class.|OK((( 649 649 650 650 ))) 651 651 652 - 653 653 == 7.3 Duty Cycle Setting == 654 654 655 655 Feature: Get or Set the ETSI Duty Cycle setting - 0=disable, 1=enable - Only for testing. 656 656 657 -{{info}} 658 -**AT Command:AT+DCS** 659 -{{/info}} 494 +AT Command:AT+DCS 660 660 661 -(% border="1" style="background-color:#ffffcc; color:green; width:515.222px" %) 662 -|=(% colspan="3" style="width: 512px;" %)AT+DCS 663 -|(% style="width:165px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:107px" %)**Response** 664 -|(% style="width:165px" %)AT+DCS=?|(% style="width:239px" %)Get the ETSI Duty Cycle setting.|(% style="width:107px" %)1((( 496 +|=(% colspan="3" %)AT+DCS 497 +|**Command Example**|**Function**|**Response** 498 +|AT+DCS=?|Get the ETSI Duty Cycle setting.|1((( 665 665 OK 666 666 ))) 667 -| (% style="width:165px" %)AT+DCS=1|(% style="width:239px" %)Set the ETSI Duty Cycle setting.|(% style="width:107px" %)OK(((501 +|AT+DCS=1|Set the ETSI Duty Cycle setting.|OK((( 668 668 669 669 ))) 670 670 671 - 672 672 == 7.4 Data Rate == 673 673 674 674 Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) . Note: while set Data Rate, please use set Adptive Data Rate, ADR=0 first. otherwise device will response to server's ADR command and change the DR to the setting from server 675 675 676 -{{info}} 677 -**AT Command: AT+DR** 678 -{{/info}} 509 +AT Command: AT+DR 679 679 680 -(% border="1" style="background-color:#ffffcc; color:green; width:466.222px" %) 681 -|=(% colspan="3" style="width: 463px;" %)AT+DR 682 -|(% style="width:156px" %)**Command Example**|(% style="width:167px" %)**Function**|(% style="width:140px" %)**Response** 683 -|(% style="width:156px" %)AT+DR=?|(% style="width:167px" %)Get the Data Rate.|(% style="width:140px" %)5((( 511 +|=(% colspan="3" %)AT+DR 512 +|**Command Example**|**Function**|**Response** 513 +|AT+DR=?|Get the Data Rate.|5((( 684 684 OK 685 685 ))) 686 -| (% style="width:156px" %)AT+DR=2|(% style="width:167px" %)Set the Data Rate.|(% style="width:140px" %)OK(((516 +|AT+DR=2|Set the Data Rate.|OK((( 687 687 688 688 ))) 689 689 690 -{{info}} 691 -**Downlink Command: 0x2200aaFF** 692 -{{/info}} 520 +Downlink Command: 0x2200aaFF 693 693 694 694 695 695 If the downlink payload=220001FF, it means setting the data rate to 1, while type code is 22 00 aa FF. 696 696 697 -* **Example 1**: Downlink Payload:**220001FF**~/~/ Set AT+DR=1.698 -* **Example 2**: Downlink Payload:**220000FF**~/~/ Set AT+DR=0.525 +* Example 1: Downlink Payload: 220001FF ~/~/ Set AT+DR=1. 526 +* Example 2: Downlink Payload: 220000FF ~/~/ Set AT+DR=0. 699 699 700 - 701 701 == 7.5 Frame Counter Downlink == 702 702 703 703 Feature: Get or Set the Frame Counter Downlink. 704 704 705 -{{info}} 706 -**AT Command:AT+FCD** 707 -{{/info}} 532 +AT Command:AT+FCD 708 708 709 -(% border="1" style="background-color:#ffffcc; color:green; width:693.222px" %) 710 -|=(% colspan="3" style="width: 690px;" %)AT+FCD 711 -|(% style="width:162px" %)**Command Example**|(% style="width:258px" %)**Function**|(% style="width:269px" %)**Response** 712 -|(% style="width:162px" %)AT+FCD=?|(% style="width:258px" %)Get the Frame Counter Downlink.|(% style="width:269px" %)0((( 534 +|=(% colspan="3" %)AT+FCD 535 +|**Command Example**|**Function**|**Response** 536 +|AT+FCD=?|Get the Frame Counter Downlink.|0((( 713 713 OK 714 714 ))) 715 -| (% style="width:162px" %)AT+FCD=10|(% style="width:258px" %)Set the Frame Counter Downlink.|(% style="width:269px" %)(System will write new value to FCD)(((539 +|AT+FCD=10|Set the Frame Counter Downlink.|(System will write new value to FCD)((( 716 716 OK 717 717 718 718 719 719 ))) 720 720 721 - 722 722 == 7.6 Frame Counter Uplink == 723 723 724 724 Feature: Get or Set the Frame Counter Uplink. 725 725 726 -{{info}} 727 -**AT Command:AT+FCU** 728 -{{/info}} 549 +AT Command:AT+FCU 729 729 730 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %) 731 -|=(% colspan="3" style="width: 531px;" %)AT+FCU 732 -|(% style="width:177px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:113px" %)**Response** 733 -|(% style="width:177px" %)AT+FCU=?|(% style="width:239px" %)Get the Frame Counter Uplink.|(% style="width:113px" %)0((( 551 +|=(% colspan="3" %)AT+FCU 552 +|**Command Example**|**Function**|**Response** 553 +|AT+FCU=?|Get the Frame Counter Uplink.|0((( 734 734 OK 735 735 ))) 736 -| (% style="width:177px" %)AT+FCU=10|(% style="width:239px" %)Set the Frame Counter Uplink.|(% style="width:113px" %)OK(((556 +|AT+FCU=10|Set the Frame Counter Uplink.|OK((( 737 737 738 738 ))) 739 739 740 - 741 741 == 7.7 Join Accept Delay1 == 742 742 743 743 Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 1 in ms. 744 744 745 -{{info}} 746 -**AT Command:AT+JN1DL** 747 -{{/info}} 564 +AT Command:AT+JN1DL 748 748 749 -(% border="1" style="background-color:#ffffcc; color:green; width:537.222px" %) 750 -|=(% colspan="3" style="width: 534px;" %)AT+JN1DL 751 -|(% style="width:164px" %)**Command Example**|(% style="width:229px" %)**Function**|(% style="width:140px" %)**Response** 752 -|(% style="width:164px" %)AT+JN1DL=?|(% style="width:229px" %)Get the Join Accept Delay.|(% style="width:140px" %)5000((( 566 +|=(% colspan="3" %)AT+JN1DL 567 +|**Command Example**|**Function**|**Response** 568 +|AT+JN1DL=?|Get the Join Accept Delay.|5000((( 753 753 OK 754 754 ))) 755 -| (% style="width:164px" %)AT+JN1DL=10000|(% style="width:229px" %)Set the Join Accept Delay.|(% style="width:140px" %)OK(((571 +|AT+JN1DL=10000|Set the Join Accept Delay.|OK((( 756 756 757 757 ))) 758 758 759 - 760 760 == 7.8 Join Accept Delay2 == 761 761 762 762 Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 2 in ms. 763 763 764 -{{info}} 765 -**AT Command:AT+JN2DL** 766 -{{/info}} 579 +AT Command:AT+JN2DL 767 767 768 -(% border="1" style="background-color:#ffffcc; color:green; width:538.222px" %) 769 -|=(% colspan="3" style="width: 535px;" %)AT+JN2DL 770 -|(% style="width:160px" %)**Command Example**|(% style="width:228px" %)**Function**|(% style="width:146px" %)**Response** 771 -|(% style="width:160px" %)AT+JN2DL=?|(% style="width:228px" %)Get the Join Accept Delay.|(% style="width:146px" %)6000((( 581 +|=(% colspan="3" %)AT+JN2DL 582 +|**Command Example**|**Function**|**Response** 583 +|AT+JN2DL=?|Get the Join Accept Delay.|6000((( 772 772 OK 773 773 ))) 774 -| (% style="width:160px" %)AT+JN2DL=20000|(% style="width:228px" %)Set the Join Accept Delay.|(% style="width:146px" %)OK(((586 +|AT+JN2DL=20000|Set the Join Accept Delay.|OK((( 775 775 776 776 ))) 777 777 778 - 779 779 == 7.9 Public Network Mode == 780 780 781 781 Feature: Get or Set the public network mode. (0: off, 1: on) 782 782 783 -{{info}} 784 -**AT Command:AT+PNM** 785 -{{/info}} 594 +AT Command:AT+PNM 786 786 787 -(% border="1" style="background-color:#ffffcc; color:green; width:667.222px" %) 788 -|=(% colspan="3" style="width: 664px;" %)AT+PNM 789 -|(% style="width:166px" %)**Command Example**|(% style="width:225px" %)**Function**|(% style="width:272px" %)**Response** 790 -|(% style="width:166px" %)AT+PNM=?|(% style="width:225px" %)Get the public network mode.|(% style="width:272px" %)1((( 596 +|=(% colspan="3" %)AT+PNM 597 +|**Command Example**|**Function**|**Response** 598 +|AT+PNM=?|Get the public network mode.|1((( 791 791 OK 792 792 ))) 793 -| (% style="width:166px" %)AT+PNM=1|(% style="width:225px" %)Set the public network mode.|(% style="width:272px" %)(System will write new value to PNM)(((601 +|AT+PNM=1|Set the public network mode.|(System will write new value to PNM)((( 794 794 OK 795 795 796 796 797 797 ))) 798 798 799 - 800 800 == 7.10 Receive Delay1 == 801 801 802 802 Feature: Get or Set the delay between the end of the Tx and the Rx Window 1 in ms 803 803 804 -{{info}} 805 -**AT Command:AT+RX1DL** 806 -{{/info}} 611 +AT Command:AT+RX1DL 807 807 808 -(% border="1" style="background-color:#ffffcc; color:green; width:408.222px" %) 809 -|=(% colspan="3" style="width: 405px;" %)AT+RX1DL 810 -|(% style="width:155px" %)**Command Example**|(% style="width:128px" %)**Function**|(% style="width:122px" %)**Response** 811 -|(% style="width:155px" %)AT+RX1DL=?|(% style="width:128px" %)Get the delay.|(% style="width:122px" %)1000((( 613 +|=(% colspan="3" %)AT+RX1DL 614 +|**Command Example**|**Function**|**Response** 615 +|AT+RX1DL=?|Get the delay.|1000((( 812 812 OK 813 813 ))) 814 -| (% style="width:155px" %)AT+RX1DL=1500|(% style="width:128px" %)Set the delay.|(% style="width:122px" %)OK(((618 +|AT+RX1DL=1500|Set the delay.|OK((( 815 815 816 816 ))) 817 817 622 +== 7.11Receive Delay2 == 818 818 819 -== 7.11 Receive Delay2 == 820 - 821 821 Feature: Get or Set the delay between the end of the Tx and the Rx Window 2 in ms 822 822 823 -{{info}} 824 -**AT Command:AT+RX2DL** 825 -{{/info}} 626 +AT Command:AT+RX2DL 826 826 827 -(% border="1" style="background-color:#ffffcc; color:green; width:481.222px" %) 828 -|=(% colspan="3" style="width: 478px;" %)AT+RX2DL 829 -|(% style="width:175px" %)**Command Example**|(% style="width:152px" %)**Function**|(% style="width:150px" %)**Response** 830 -|(% style="width:175px" %)AT+RX2DL=?|(% style="width:152px" %)Get the delay.|(% style="width:150px" %)2000((( 628 +|=(% colspan="3" %)AT+RX2DL 629 +|**Command Example**|**Function**|**Response** 630 +|AT+RX2DL=?|Get the delay.|2000((( 831 831 OK 832 832 ))) 833 -| (% style="width:175px" %)AT+RX2DL=2500|(% style="width:152px" %)Set the delay.|(% style="width:150px" %)OK(((633 +|AT+RX2DL=2500|Set the delay.|OK((( 834 834 835 835 ))) 836 836 837 - 838 838 == 7.12 Rx2 Window Data Rate == 839 839 840 840 Feature: Get or Set the Rx2 window data rate (0-7 corresponding to DR_X) 841 841 842 -{{info}} 843 -**AT Command:AT+RX2DR** 844 -{{/info}} 641 +AT Command:AT+RX2DR 845 845 846 -(% border="1" style="background-color:#ffffcc; color:green; width:525.222px" %) 847 -|=(% colspan="3" style="width: 522px;" %)AT+RX2DR 848 -|(% style="width:160px" %)**Command Example**|(% style="width:232px" %)**Function**|(% style="width:130px" %)**Response** 849 -|(% style="width:160px" %)AT+RX2DR=?|(% style="width:232px" %)Get the Rx2 window data rate.|(% style="width:130px" %)2((( 643 +|=(% colspan="3" %)AT+RX2DR 644 +|**Command Example**|**Function**|**Response** 645 +|AT+RX2DR=?|Get the Rx2 window data rate.|2((( 850 850 OK 851 851 ))) 852 -| (% style="width:160px" %)AT+RX2DR=6|(% style="width:232px" %)Set the Rx2 window data rate.|(% style="width:130px" %)OK(((648 +|AT+RX2DR=6|Set the Rx2 window data rate.|OK((( 853 853 854 854 ))) 855 855 856 - 857 857 == 7.13 Rx2 Window Frequency == 858 858 859 859 Feature: Get or Set the Rx2 window frequency 860 860 861 -{{info}} 862 -**AT Command:AT+RX2FQ** 863 -{{/info}} 656 +AT Command:AT+RX2FQ 864 864 865 -(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %) 866 -|=(% colspan="3" style="width: 584px;" %)AT+RX2FQ 867 -|(% style="width:183px" %)**Command Example**|(% style="width:240px" %)**Function**|(% style="width:160px" %)**Response** 868 -|(% style="width:183px" %)AT+RX2FQ=?|(% style="width:240px" %)Get the Rx2 window frequency.|(% style="width:160px" %)434665000((( 658 +|=(% colspan="3" %)AT+RX2FQ 659 +|**Command Example**|**Function**|**Response** 660 +|AT+RX2FQ=?|Get the Rx2 window frequency.|434665000((( 869 869 OK 870 870 ))) 871 -| (% style="width:183px" %)AT+RX2FQ=434665000|(% style="width:240px" %)Set the Rx2 window frequency.|(% style="width:160px" %)OK(((663 +|AT+RX2FQ=434665000|Set the Rx2 window frequency.|OK((( 872 872 873 873 ))) 874 874 875 - 876 876 == 7.14 Transmit Power == 877 877 878 878 Feature: Get or Set the Transmit Power(0-5, MAX:0, MIN:5, according to LoRaWAN Spec, or 40=10dB, 41 = 11dB, …, 50 = 20dB which is out of LoRaWAN spec. ) 879 879 880 -{{info}} 881 -**AT Command:AT+TXP** 882 -{{/info}} 671 +AT Command:AT+TXP 883 883 884 -(% border="1" style="background-color:#ffffcc; color:green; width:465.222px" %) 885 -|=(% colspan="3" style="width: 462px;" %)AT+TXP 886 -|(% style="width:161px" %)**Command Example**|(% style="width:189px" %)**Function**|(% style="width:112px" %)**Response** 887 -|(% style="width:161px" %)AT+TXP=?|(% style="width:189px" %)Get the Transmit Power.|(% style="width:112px" %)0((( 673 +|=(% colspan="3" %)AT+TXP 674 +|**Command Example**|**Function**|**Response** 675 +|AT+TXP=?|Get the Transmit Power.|0((( 888 888 OK 889 889 ))) 890 -| (% style="width:161px" %)AT+TXP=1|(% style="width:189px" %)Set the Transmit Power.|(% style="width:112px" %)OK(((678 +|AT+TXP=1|Set the Transmit Power.|OK((( 891 891 892 892 ))) 893 893 ... ... @@ -895,190 +895,146 @@ 895 895 896 896 If the downlink payload=22000100, it means setting the TXP to 0. 897 897 898 -* **Example 1**: Downlink Payload:**22000102**~/~/ Set AT+TXP=2.899 -* **Example 2**: Downlink Payload:**220000FF**~/~/ Set AT+TXP=0.686 +* Example 1: Downlink Payload: 22000102 ~/~/ Set AT+TXP=2. 687 +* Example 2: Downlink Payload: 220000FF ~/~/ Set AT+TXP=0. 900 900 901 - 902 902 == 7.15 RSSI of the Last Received Packet == 903 903 904 904 Feature: Get or Set the Rx2 window frequency 905 905 906 -{{info}} 907 -**AT Command:AT+RSSI** 908 -{{/info}} 693 +AT Command:AT+RSSI 909 909 910 -(% border="1" style="background-color:#ffffcc; color:green; width:557.222px" %) 911 -|=(% colspan="3" style="width: 554px;" %)AT+RSSI 912 -|(% style="width:164px" %)**Command Example**|(% style="width:289px" %)**Function**|(% style="width:100px" %)**Response** 913 -|(% style="width:164px" %)AT+RSSI=?|(% style="width:289px" %)Get the RSSI of the last received packet.|(% style="width:100px" %)0((( 695 +|=(% colspan="3" %)AT+RSSI 696 +|**Command Example**|**Function**|**Response** 697 +|AT+RSSI=?|Get the RSSI of the last received packet.|0((( 914 914 OK 915 915 ))) 916 916 917 - 918 918 == 7.16 SNR of the Last Received Packet == 919 919 920 920 Feature: Get the SNR of the last received packet 921 921 922 -{{info}} 923 -**AT Command:AT+SNR** 924 -{{/info}} 705 +AT Command:AT+SNR 925 925 926 -(% border="1" style="background-color:#ffffcc; color:green; width:571.222px" %) 927 -|=(% colspan="3" style="width: 568px;" %)AT+SNR 928 -|(% style="width:164px" %)**Command Example**|(% style="width:290px" %)**Function**|(% style="width:113px" %)**Response** 929 -|(% style="width:164px" %)AT+SNR=?|(% style="width:290px" %)Get the RSSI of the last received packet.|(% style="width:113px" %)0((( 707 +|=(% colspan="3" %)AT+SNR 708 +|**Command Example**|**Function**|**Response** 709 +|AT+SNR=?|Get the RSSI of the last received packet.|0((( 930 930 OK 931 931 ))) 932 932 933 - 934 934 == 7.17 Application Port == 935 935 936 936 Feature: Get or set the application port. 937 937 938 -{{info}} 939 -**AT Command: AT+PORT** 940 -{{/info}} 717 +AT Command: AT+PORT 941 941 942 -(% border="1" style="background-color:#ffffcc; color:green; width:500.222px" %) 943 -|=(% colspan="3" style="width: 497px;" %)AT+PORT 944 -|(% style="width:157px" %)**Command Example**|(% style="width:204px" %)**Function**|(% style="width:135px" %)**Response** 945 -|(% style="width:157px" %)AT+PORT=?|(% style="width:204px" %)Get the application port|(% style="width:135px" %)21((( 719 +|=(% colspan="3" %)AT+PORT 720 +|**Command Example**|**Function**|**Response** 721 +|AT+PORT=?|Get the application port|21((( 946 946 OK 947 947 ))) 948 -| (% style="width:157px" %)AT+PORT=21|(% style="width:204px" %)Set the application port|(% style="width:135px" %)OK724 +|AT+PORT=21|Set the application port|OK 949 949 950 -{{info}} 951 -**Downlink Command: 0x23** 952 -{{/info}} 726 +Downlink Command: 0x23 953 953 954 954 Format: Command Code (0x23) followed by 1 bytes port value. 955 955 956 956 If the downlink payload=2301, it means set the application port to 1, while type code is 23. 957 957 958 -* **Example 1**: Downlink Payload:**2301**~/~/ set the application port to 1959 -* **Example 2**: Downlink Payload:**2305**~/~/ set the application port to 5732 +* Example 1: Downlink Payload: 2301 ~/~/ set the application port to 1 733 +* Example 2: Downlink Payload: 2305 ~/~/ set the application port to 5 960 960 961 - 962 962 == 7.18 Single Channel Mode == 963 963 964 964 Feature:Get or Set Frequency (Unit: Hz) for Single Channel Mode. 965 965 966 -{{info}} 967 -**AT Command: AT+CHS** 968 -{{/info}} 739 +AT Command: AT+CHS 969 969 970 -(% border="1" style="background-color:#ffffcc; color:green; width:603.222px" %) 971 -|=(% colspan="3" style="width: 600px;" %)AT+CHS 972 -|(% style="width:182px" %)**Command Example**|(% style="width:295px" %)**Function**|(% style="width:122px" %)**Response** 973 -|(% style="width:182px" %)AT+CHS=?|(% style="width:295px" %)Get Frequency for Single Channel Mode|(% style="width:122px" %)0((( 741 +|=(% colspan="3" %)AT+CHS 742 +|**Command Example**|**Function**|**Response** 743 +|AT+CHS=?|Get Frequency for Single Channel Mode|0((( 974 974 OK 975 975 ))) 976 -| (% style="width:182px" %)AT+CHS=868100000|(% style="width:295px" %)Set Frequency for Single Channel Mode|(% style="width:122px" %)OK746 +|AT+CHS=868100000|Set Frequency for Single Channel Mode|OK 977 977 978 - 979 979 == 7.19 Eight Channel Mode == 980 980 981 981 Feature: Get or Set eight channels mode,Only for US915,AU915,CN470. 982 982 983 -{{info}} 984 -**AT Command: AT+CHE** 985 -{{/info}} 752 +AT Command: AT+CHE 986 986 987 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %) 988 -|=(% colspan="3" style="width: 707px;" %)AT+CHE 989 -|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response** 990 -|(% style="width:160px" %)AT+CHE=?|(% style="width:198px" %)Get eight channels mode|(% style="width:349px" %)1((( 754 +|=(% colspan="3" %)AT+CHE 755 +|**Command Example**|**Function**|**Response** 756 +|AT+CHE=?|Get eight channels mode|1((( 991 991 902.3 902.5 902.7 902.9 903.1 903.3 903.5 903.7 992 992 993 993 OK 994 994 ))) 995 -| (% style="width:160px" %)AT+CHE=1|(% style="width:198px" %)Set eight channels mode|(% style="width:349px" %)OK761 +|AT+CHE=1|Set eight channels mode|OK 996 996 997 -{{info}} 998 -**Downlink Command: 0x24** 999 -{{/info}} 763 +Downlink Command: 0x24 1000 1000 1001 1001 Format: Command Code (0x24) followed by 1 bytes channel value. 1002 1002 1003 1003 If the downlink payload=2401, it means set channel mode to 1, while type code is 24. 1004 1004 1005 -* **Example 1**: Downlink Payload: 2401 ~/~/ set channel mode to 11006 -* **Example 2**: Downlink Payload: 2405 ~/~/ set channel mode to 5769 +* Example 1: Downlink Payload: 2401 ~/~/ set channel mode to 1 770 +* Example 2: Downlink Payload: 2405 ~/~/ set channel mode to 5 1007 1007 1008 - 1009 1009 == 7.20 Get or Set RXwindows1 timeout == 1010 1010 1011 1011 Feature:Get or Set the number of symbols to detect and timeout from RXwindow1(0 to 255). 1012 1012 1013 -{{info}} 1014 -**AT Command: AT+RX1WTO** 1015 -{{/info}} 776 +AT Command: AT+RX1WTO 1016 1016 1017 -(% border="1" style="background-color:#ffffcc; color:green; width:460.222px" %) 1018 -|=(% colspan="3" style="width: 457px;" %)AT+ RX1WTO 1019 -|(% style="width:163px" %)**Command Example**|(% style="width:201px" %)**Function**|(% style="width:93px" %)**Response** 1020 -|(% style="width:163px" %)AT+RX1WTO=?|(% style="width:201px" %)Get RXwindows1 timeout|(% style="width:93px" %)14((( 778 +|=(% colspan="3" %)AT+ RX1WTO 779 +|**Command Example**|**Function**|**Response** 780 +|AT+RX1WTO=?|Get RXwindows1 timeout|14((( 1021 1021 OK 1022 1022 ))) 1023 -| (% style="width:163px" %)AT+RX1WTO=60|(% style="width:201px" %)Set RXwindows1 timeout|(% style="width:93px" %)OK783 +|AT+RX1WTO=60|Set RXwindows1 timeout|OK 1024 1024 1025 -((( 1026 -**AT+RX1TWO** is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph. 1027 -))) 785 +AT+RX1TWO is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph. 1028 1028 1029 -[[image:image -20220526162535-1.png]]787 +[[~[~[image:https://wiki.dragino.com/images/thumb/5/51/RX1WTO.JPG/600px-RX1WTO.JPG~|~|alt="RX1WTO.JPG" height="239" width="600"~]~]>>url:https://wiki.dragino.com/index.php/File:RX1WTO.JPG]] 1030 1030 1031 -((( 1032 1032 Increasing thisvalue is equal to extending the time that the receiving window is opened, butthe corresponding power consumption will also increase. Properly increasingthis value can increase the success rate of the downlink. 1033 1033 1034 - 1035 -))) 1036 - 1037 1037 == 7.21 Get or Set RXwindows2 timeout == 1038 1038 1039 1039 Feature:Get or Set the number of symbols to detect and timeout from RXwindow2(0 to 255). 1040 1040 1041 -{{info}} 1042 -**AT Command: AT+RX2WTO** 1043 -{{/info}} 795 +AT Command: AT+RX2WTO 1044 1044 1045 -(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %) 1046 -|=(% colspan="3" style="width: 494px;" %)AT+ RX2WTO 1047 -|(% style="width:190px" %)**Command Example**|(% style="width:199px" %)**Function**|(% style="width:104px" %)**Response** 1048 -|(% style="width:190px" %)AT+RX2WTO=?|(% style="width:199px" %)Get RXwindows2 timeout|(% style="width:104px" %)7((( 797 +|=(% colspan="3" %)AT+ RX2WTO 798 +|**Command Example**|**Function**|**Response** 799 +|AT+RX2WTO=?|Get RXwindows2 timeout|7((( 1049 1049 OK 1050 1050 ))) 1051 -| (% style="width:190px" %)AT+RX2WTO=20|(% style="width:199px" %)Set RXwindows2 timeout|(% style="width:104px" %)OK802 +|AT+RX2WTO=20|Set RXwindows2 timeout|OK 1052 1052 1053 - 1054 1054 == 7.22 Setting up uplinkdwelltime (as923, au915) == 1055 1055 1056 1056 Feature: Get or Set uplinkdwelltime 1057 1057 1058 -{{info}} 1059 -**AT Command: AT+DWELLT** 1060 -{{/info}} 808 +AT Command: AT+DWELLT 1061 1061 1062 -(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %) 1063 -|=(% colspan="3" style="width: 494px;" %)AT+DWELLT 1064 -|(% style="width:183px" %)**Command Example**|(% style="width:179px" %)**Function**|(% style="width:131px" %)**Response** 1065 -|(% style="width:183px" %)AT+DWELLT=?|(% style="width:179px" %)Get uplinkdwelltime|(% style="width:131px" %)1((( 810 +|=(% colspan="3" %)AT+DWELLT 811 +|**Command Example**|**Function**|**Response** 812 +|AT+DWELLT=?|Get uplinkdwelltime|1((( 1066 1066 OK 1067 1067 ))) 1068 -| (% style="width:183px" %)AT+DWELLT=0|(% style="width:179px" %)Set uplinkdwelltime|(% style="width:131px" %)OK815 +|AT+DWELLT=0|Set uplinkdwelltime|OK 1069 1069 1070 -{{info}} 1071 -**Downlink Command: 0x25** 1072 -{{/info}} 817 +Downlink Command: 0x25 1073 1073 1074 1074 Format: Command Code (0x25) followed by 1 bytes state value. 1075 1075 1076 1076 If the downlink payload=2501, it means set uplinkdwelltime to 1, while type code is 25. 1077 1077 1078 -* **Example 1**: Downlink Payload:**2501**~/~/ set uplinkdwelltime to 11079 -* **Example 2**: Downlink Payload:**2500**~/~/ set uplinkdwelltime to 0823 +* Example 1: Downlink Payload: 2501 ~/~/ set uplinkdwelltime to 1 824 +* Example 2: Downlink Payload: 2500 ~/~/ set uplinkdwelltime to 0 1080 1080 1081 - 1082 1082 == 7.23 Set Packet Receiving Response Level == 1083 1083 1084 1084 Feature: Get or Set packet receiving response level. This feature is used to set compatible with different LoRaWAN servers. If RPL doesn;t match , user will see strange message in the server portal. ... ... @@ -1085,11 +1085,11 @@ 1085 1085 1086 1086 RPL value: 1087 1087 1088 -* **AT+RPL=0:**Device won't immediately reply any downlink commands from platform.1089 -* **AT+RPL=1:**Device will immediately reply message to Unconfirmed Data Down. Payload is 0x00.1090 -* **AT+RPL=2:**Device will immediately reply message to Confirmed Data Down. Payload is 0x00 and requied response header for this command.1091 -* **AT+RPL=3:**Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command.1092 -* **AT+RPL=4:**Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands.832 +* AT+RPL=0: Device won't immediately reply any downlink commands from platform. 833 +* AT+RPL=1: Device will immediately reply message to Unconfirmed Data Down. Payload is 0x00. 834 +* AT+RPL=2: Device will immediately reply message to Confirmed Data Down. Payload is 0x00 and requied response header for this command. 835 +* AT+RPL=3: Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command. 836 +* AT+RPL=4: Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands. 1093 1093 1094 1094 Case Analyes: 1095 1095 ... ... @@ -1097,46 +1097,37 @@ 1097 1097 * For Class C devices used in ChirpStack, need to set AT+RPL=4 because Chirpstack require immedietely reply message to MAC Command. 1098 1098 * For Class C devices used in TTI, need to set AT+RPL=4 because TTI require immediately reply message to Confirmed Data Down & MAC Command. 1099 1099 1100 -{{info}} 1101 -**AT Command: AT+RPL** 1102 -{{/info}} 844 +AT Command: AT+RPL 1103 1103 1104 -(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %) 1105 -|=(% colspan="3" style="width: 533px;" %)AT+RPL 1106 -|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response** 1107 -|(% style="width:160px" %)AT+RPL=?|(% style="width:263px" %)Get packet receiving response level|(% style="width:109px" %)1((( 846 +|=(% colspan="3" %)AT+RPL 847 +|**Command Example**|**Function**|**Response** 848 +|AT+RPL=?|Get packet receiving response level|1((( 1108 1108 OK 1109 1109 ))) 1110 -| (% style="width:160px" %)AT+RPL=0|(% style="width:263px" %)Set packet receiving response level|(% style="width:109px" %)OK851 +|AT+RPL=0|Set packet receiving response level|OK 1111 1111 1112 -{{info}} 1113 -**Downlink Command: 0x21** 1114 -{{/info}} 853 +Downlink Command: 0x21 1115 1115 1116 1116 Format: Command Code (0x21) followed by 1 bytes level value. 1117 1117 1118 1118 If the downlink payload=2101, it means set packet receiving response level to 1, while type code is 21. 1119 1119 1120 -* **Example 1**: Downlink Payload:**2101**~/~/ set packet receiving response level to 11121 -* **Example 2**: Downlink Payload:**2102**~/~/ set packet receiving response level to 2859 +* Example 1: Downlink Payload: 2101 ~/~/ set packet receiving response level to 1 860 +* Example 2: Downlink Payload: 2102 ~/~/ set packet receiving response level to 2 1122 1122 1123 - 1124 1124 = 8. AT Commands Combination = 1125 1125 1126 1126 == 8.1 Set a fix RX2DR for downlink window == 1127 1127 1128 -* **AT+ADR=0**~-~-> Disable ADR first1129 -* **AT+RX2DR=xxxx**~-~-> Set xxxx to your wanted DataRate866 +* AT+ADR=0 ~-~-> Disable ADR first 867 +* AT+RX2DR=xxxx ~-~-> Set xxxx to your wanted DataRate 1130 1130 1131 - 1132 1132 == 8.2 Use Downlink Command to set a fix uplink DR == 1133 1133 1134 -{{info}} 1135 -**Downlink Command: 0x22000500** 1136 -{{/info}} 871 +Downlink Command: 0x22000500 1137 1137 1138 1138 Same as: 1139 1139 1140 -* AT+ADR=0 ||anchor="H7.1AdaptiveDataRate"]]1141 -* AT+DR=5 ||anchor="H7.4DataRate"]]1142 -* AT+TXP=0 ||anchor="H7.14TransmitPower"]]875 +* AT+ADR=0 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Adaptive_Data_Rate]] 876 +* AT+DR=5 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Data_Rate]] 877 +* AT+TXP=0 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Transmit_Power]]
- image-20220511120050-1.png
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -XWiki.Xiaoling - Size
-
... ... @@ -1,1 +1,0 @@ 1 -136.3 KB - Content
- image-20220526162535-1.png
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -XWiki.Xiaoling - Size
-
... ... @@ -1,1 +1,0 @@ 1 -149.4 KB - Content