Last modified by kai on 2024/09/06 10:00
<
From version < 38.4 >
edited by Xiaoling
on 2022/05/30 10:48
To version < 7.8 >
edited by Xiaoling
on 2022/05/11 11:17
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,9 +1,8 @@
1 - **Contents：**
1 +Contens
2 2  
3 3  {{toc/}}
4 4  
5 5  
6 -
7 7  = 1. Introduction =
8 8  
9 9  Dragino LoRaWAN End Node support two types of AT Commands and Downlink Commands:
... ... @@ -11,95 +11,34 @@
11 11  * **Common Commands:** They should be available for each sensor, such as: change uplink interval, reset device.
12 12  * **Sensor Related Commands:** Only for special sensor, such as control relay, poll RS485 device.
13 13  
14 -(((
15 15  **This page shows the common commands since Dragino LoRaWAN stack DR-LWS-005. Make sure the end node support stack higher than DR-LWS-005 before checking this page.**
16 16  
17 -)))
18 18  
19 19  = 2. How to use AT Commands or Downlink command =
20 20  
21 21  * For AT Command , See Devices User Manual for Device. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
22 22  * For LoRaWAN Downlink: The gateway transfer downlink command in HEX format. This page shows the HEX format downlink code for each command. but some servers use base64 as downlink code. Below are reference for how to use downlink command:
23 -** Use HEX format to send a downlink: [[TTN v3>>doc:Main.Notes for TTN.WebHome]]
24 -** Use Base64 format to send a downlink: [[Chirpstack>>doc:Main.Notes for ChirpStack.WebHome]].
25 -** See use note for more serves [[Servers Note>>doc:Main.WebHome]](IoT LoRaWAN Server)
20 +** Use HEX format to send a downlink: [[TTN v3>>url:https://wiki.dragino.com/index.php/Notes_for_TTN#Send_Downlink_message]]
21 +** Use Base64 format to send a downlink: [[Chirpstack>>url:https://wiki.dragino.com/index.php/Notes_for_ChirpStack#Downlink]].
22 +** See use note for more serves [[Servers Note>>url:https://wiki.dragino.com/index.php/Main_Page#Use_Note_for_Server]]
26 26  
27 -
28 -
29 29  = 3. Support End Node and firmware version =
30 30  
31 -(% border="1" style="background-color:#ffffcc; color:green; width:966px" %)
32 -|=(% colspan="3" style="width: 963px;" %)(((
33 -Dragino STM32 base hardware Firmware / LoRaWAN stack list
34 -)))
35 -|(% style="width:187px" %)(((
36 -**Model**
37 -)))|(% style="width:330px" %)(((
38 -**Description**
39 -)))|(% style="width:445px" %)(((
40 -**Firmware Version <~-~-> Stack Version**
41 -)))
42 -|(% style="width:187px" %)(((
43 -[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],
44 -)))|(% style="width:330px" %)(((
45 -Open Source Generic LoRaWAN Sensor Node
46 -)))|(% style="width:445px" %)(((
47 -(((
48 -LSN50 v1.6.0 <~-~-> DR-LWS-003;
49 -)))
50 -
51 -(((
52 -(((
26 +(% style="background-color:#ffffcc; color:green; width:995.222px" %)
27 +|=(% colspan="3" style="width: 992px;" %)Dragino STM32 base hardware Firmware / LoRaWAN stack list
28 +|(% style="width:187px" %)**Model**|(% style="width:349px" %)**Description**|(% style="width:453px" %)**Firmware Version <~-~-> Stack Version**
29 +|(% style="width:187px" %)[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],|(% style="width:349px" %)Open Source Generic LoRaWAN Sensor Node|(% style="width:453px" %)LSN50 v1.6.0 <~-~-> DR-LWS-003;(((
53 53  LSN50 v1.7.0 <~-~-> DR-LWS-005; ~-~-> Support since this version
54 54  )))
55 -)))
56 -)))
57 -|(% style="width:187px" %)(((
58 -[[LGT92>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/142-lgt-92.html]],
59 -)))|(% style="width:330px" %)(((
60 -LoRaWAN GPS Tracker
61 -)))|(% style="width:445px" %)(((
62 -(((
63 -LGT92 v1.6.3 <~-~-> DR-LWS-003;
64 -)))
65 -
66 -(((
67 -(((
32 +|(% style="width:187px" %)[[LGT92>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/142-lgt-92.html]],|(% style="width:349px" %)LoRaWAN GPS Tracker|(% style="width:453px" %)LGT92 v1.6.3 <~-~-> DR-LWS-003;(((
68 68  LGT92 v1.6.4 <~-~-> DR-LWS-005;~-~-> Support since this version
69 69  )))
70 -)))
71 -)))
72 -|(% style="width:187px" %)(((
73 -[[LBT1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/165-lbt1.html]],
74 -)))|(% style="width:330px" %)(((
75 -LoRaWAN BLE Indoor Tracker
76 -)))|(% style="width:445px" %)(((
77 -LBT1 v1.0 <~-~-> DR-LWS-005;
78 -)))
79 -|(% style="width:187px" %)(((
80 -[[RS485-LN>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/154-rs485-ln.html]],
81 -)))|(% style="width:330px" %)(((
82 -LoRaWAN RS485 Modbus Converter
83 -)))|(% style="width:445px" %)(((
84 -RS485-LN v1.3 <~-~-> DR-LWS-005;
85 -)))
86 -|(% style="width:187px" %)(((
87 -[[LHT65>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/151-lht65.html]],
88 -)))|(% style="width:330px" %)(((
89 -LoRaWAN Temperature & Humidity Sensor
90 -)))|(% style="width:445px" %)(((
91 -(((
92 -LHT65 v1.7 <~-~-> DR-LWS-003;
93 -)))
94 -
95 -(((
96 -(((
35 +|(% style="width:187px" %)[[LBT1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/165-lbt1.html]],|(% style="width:349px" %)LoRaWAN BLE Indoor Tracker|(% style="width:453px" %)LBT1 v1.0 <~-~-> DR-LWS-005;
36 +|(% style="width:187px" %)[[RS485-LN>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/154-rs485-ln.html]],|(% style="width:349px" %)LoRaWAN RS485 Modbus Converter|(% style="width:453px" %)RS485-LN v1.3 <~-~-> DR-LWS-005;
37 +|(% style="width:187px" %)[[LHT65>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/151-lht65.html]],|(% style="width:349px" %)LoRaWAN Temperature & Humidity Sensor|(% style="width:453px" %)LHT65 v1.7 <~-~-> DR-LWS-003;(((
97 97  LHT65 v1.8.0 <~-~-> DR-LWS-005;~-~-> Support since this version
98 98  )))
99 -)))
100 -)))
101 101  
102 -
103 103  = 4. System Management Commands =
104 104  
105 105  == 4.1 Change Uplink Interval ==
... ... @@ -111,7 +111,7 @@
111 111  **AT Command: AT+TDC**
112 112  )))
113 113  
114 -(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
52 +(% style="background-color:#ffffcc; color:green; width:727.222px" %)
115 115  |=(% colspan="3" style="width: 724px;" %)AT+TDC
116 116  |(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
117 117  |(% style="width:165px" %)AT+TDC=?|(% style="width:227px" %)Show current transmit Interval|(% style="width:329px" %)30000(((
... ... @@ -127,18 +127,13 @@
127 127  **Downlink Command: 0x01**
128 128  {{/info}}
129 129  
130 -(((
131 131  Format: Command Code (0x01) followed by 3 bytes time value.
132 -)))
133 133  
134 -(((
135 135  If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
136 -)))
137 137  
138 138  * **Example 1**: Downlink Payload:** 0100001E** ~/~/ Set Transmit Interval (TDC) = 30 seconds
139 139  * **Example 2**: Downlink Payload:** 0100003C** ~/~/ Set Transmit Interval (TDC) = 60 seconds
140 140  
141 -
142 142  == 4.2 Reboot End Node ==
143 143  
144 144  Feature: Reboot End Node to perform a new OTAA or ABP Join.
... ... @@ -147,7 +147,7 @@
147 147  **AT Command: ATZ**
148 148  {{/info}}
149 149  
150 -(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
83 +(% border="0" style="background-color:#ffffcc; color:green; width:727.222px" %)
151 151  |=(% colspan="3" %)ATZ: Trig a reset of the MCU
152 152  |**Command Example**|**Function**|**Response**
153 153  |ATZ|Reset MCU|(((
... ... @@ -168,16 +168,10 @@
168 168  **Downlink Command: 0x04**
169 169  {{/info}}
170 170  
171 -(((
172 172  Format: Command Code (0x04) followed by FF.
173 -)))
174 174  
175 -(((
176 176  If the downlink payload=**04FF**, the end node will reboot.
177 177  
178 -
179 -)))
180 -
181 181  == 4.3 Reset to factory Default ==
182 182  
183 183  Feature: Reset the parameters to Factory Default, factory default value depends on the firmware settings, the OTAA and ABP keys will reserve after this command.
... ... @@ -186,7 +186,7 @@
186 186  **AT Command: AT+FDR**
187 187  {{/info}}
188 188  
189 -(% border="1" style="background-color:#ffffcc; color:green; width:831.222px" %)
116 +(% style="background-color:#ffffcc; color:green; width:831.222px" %)
190 190  |=(% colspan="3" style="width: 828px;" %)Reset to factory default
191 191  |(% style="width:181px" %)**Command Example**|(% style="width:181px" %)**Function**|(% style="width:465px" %)**Response**
192 192  |(% style="width:181px" %)AT+FDR|(% style="width:181px" %)Reset to factory default|(% style="width:465px" %)(((
... ... @@ -207,13 +207,9 @@
207 207  **Downlink Command: 0x04**
208 208  {{/info}}
209 209  
210 -(((
211 211  Format: Command Code (0x04) followed by FE.
212 -)))
213 213  
214 -(((
215 215  If the downlink payload=**04FE**, Reset Parameters to Factory Default, Keys Reserve.
216 -)))
217 217  
218 218  
219 219  == 4.4 Show Firmware Version ==
... ... @@ -224,10 +224,10 @@
224 224  **AT Command: AT+VER**
225 225  {{/info}}
226 226  
227 -(% border="1" style="background-color:#ffffcc; color:green; width:586px" %)
228 -|=(% colspan="3" style="width: 583px;" %)AT+VER: Image Version and Frequency Band
229 -|(% style="width:170px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:113px" %)**Response**
230 -|(% style="width:170px" %)AT+VER=?|(% style="width:300px" %)Show Image version and Frequency Band|(% style="width:113px" %)(((
150 +(% style="background-color:#ffffcc; color:green" %)
151 +|=(% colspan="3" %)AT+VER: Image Version and Frequency Band
152 +|**Command Example**|**Function**|**Response**
153 +|AT+VER=?|Show Image version and Frequency Band|(((
231 231  1.3 EU868
232 232  
233 233  OK
... ... @@ -237,25 +237,17 @@
237 237  **Downlink Command: 0x26 (Valid in 006 stack)**
238 238  {{/info}}
239 239  
240 -(((
241 241  Downlink Format: 0x26
242 -)))
243 243  
244 -(((
245 245  Device will reply with firmware version info, device info. frequency band info. detail please check device user manual. Total 5 bytes Example: If device is of firmware version 1.1.0 Upload: xx ~-~- yy ~-~- zz ~-~- 110 total 5 bytes
246 -)))
247 247  
248 -(((
249 249  **xx: Software Type:**
250 -)))
251 251  
252 252  * 0x00 01: LGT92 Version
253 253  * 0x00 02: LBT1
254 254  * 0x00 03: LSE01/LDDS75/LDDS20/LSPH01/LLMS01/LSNPK01
255 255  
256 -(((
257 257  **yy: Frequency Band:**
258 -)))
259 259  
260 260  * 0x01: EU868
261 261  * 0x02: US915
... ... @@ -268,9 +268,7 @@
268 268  * 0x09: AS923-2
269 269  * 0xa0: AS923-3
270 270  
271 -(((
272 272  **zz: Subband**
273 -)))
274 274  
275 275  firmware version: v1.1.0 ~-~-> 110
276 276  
... ... @@ -283,7 +283,7 @@
283 283  **AT Command: AT+CFG**
284 284  {{/info}}
285 285  
286 -(% border="1" style="background-color:#ffffcc; color:green; width:599.222px" %)
199 +(% style="background-color:#ffffcc; color:green; width:599.222px" %)
287 287  |=(% colspan="3" style="width: 596px;" %)AT+CFG: Print all configurations
288 288  |(% style="width:160px" %)**Command Example**|(% style="width:154px" %)**Function**|(% style="width:280px" %)**Response**
289 289  |(% style="width:160px" %)AT+CFG|(% style="width:154px" %)Show all configures|(% style="width:280px" %)(((
... ... @@ -300,8 +300,6 @@
300 300  OK
301 301  )))
302 302  
303 -
304 -
305 305  = 5. Keys, IDs and EUIs management =
306 306  
307 307  == 5.1 Application EUI ==
... ... @@ -312,7 +312,7 @@
312 312  **AT Command: AT+APPEUI**
313 313  {{/info}}
314 314  
315 -(% border="1" style="background-color:#ffffcc; color:green; width:686.222px" %)
226 +(% style="background-color:#ffffcc; color:green; width:686.222px" %)
316 316  |=(% colspan="3" style="width: 683px;" %)AT+APPEUI
317 317  |(% style="width:305px" %)**Command Example**|(% style="width:186px" %)**Function**|(% style="width:191px" %)**Response**
318 318  |(% style="width:305px" %)AT+APPEUI=?|(% style="width:186px" %)Get the Application EUI|(% style="width:191px" %)00 b3 d5 00 00 00 00 00(((
... ... @@ -328,7 +328,7 @@
328 328  **AT Command: AT+APPKEY**
329 329  {{/info}}
330 330  
331 -(% border="1" style="background-color:#ffffcc; color:green; width:976.222px" %)
242 +(% style="background-color:#ffffcc; color:green; width:976.222px" %)
332 332  |=(% colspan="3" style="width: 973px;" %)AT+APPKEY
333 333  |(% style="width:441px" %)**Command Example**|(% style="width:180px" %)**Function**|(% style="width:350px" %)**Response**
334 334  |(% style="width:441px" %)AT+APPKEY=?|(% style="width:180px" %)Get the Application Key|(% style="width:350px" %)00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35(((
... ... @@ -344,7 +344,7 @@
344 344  **AT Command: AT+APPSKEY**
345 345  {{/info}}
346 346  
347 -(% border="1" style="background-color:#ffffcc; color:green; width:1040.22px" %)
258 +(% style="background-color:#ffffcc; color:green; width:1040.22px" %)
348 348  |=(% colspan="3" style="width: 1037px;" %)AT+APPSKEY
349 349  |(% style="width:451px" %)**Command Example**|(% style="width:231px" %)**Function**|(% style="width:354px" %)**Response**
350 350  |(% style="width:451px" %)AT+APPSKEY=?|(% style="width:231px" %)Get the Application Session Key|(% style="width:354px" %)00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2(((
... ... @@ -362,7 +362,7 @@
362 362  **AT Command: AT+DADDR**
363 363  {{/info}}
364 364  
365 -(% border="1" style="background-color:#ffffcc; color:green; width:795.222px" %)
276 +(% style="background-color:#ffffcc; color:green; width:795.222px" %)
366 366  |=(% colspan="3" style="width: 792px;" %)AT+DADDR
367 367  |(% style="width:192px" %)**Command Example**|(% style="width:241px" %)**Function**|(% style="width:359px" %)**Response**
368 368  |(% style="width:192px" %)AT+DADDR=?|(% style="width:241px" %)Get the Application Session Key.|(% style="width:359px" %)(While Error in format, return AT_PARAM_ERROR)(((
... ... @@ -380,7 +380,7 @@
380 380  **AT Command: AT+DEUI**
381 381  {{/info}}
382 382  
383 -(% border="1" style="background-color:#ffffcc; color:green; width:1035.22px" %)
294 +(% style="background-color:#ffffcc; color:green; width:1035.22px" %)
384 384  |=(% colspan="3" style="width: 1032px;" %)AT+DEUI
385 385  |(% style="width:250px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:634px" %)**Response**
386 386  |(% style="width:250px" %)AT+DEUI=?|(% style="width:147px" %)Get the Device EUI.|(% style="width:634px" %)00 44 34 22 33 45 55 55(((
... ... @@ -398,7 +398,7 @@
398 398  **AT Command: AT+NWKID**
399 399  {{/info}}
400 400  
401 -(% border="1" style="background-color:#ffffcc; color:green; width:448.222px" %)
312 +(% style="background-color:#ffffcc; color:green; width:448.222px" %)
402 402  |=(% colspan="3" style="width: 445px;" %)AT+NWKID
403 403  |(% style="width:191px" %)**Command Example**|(% style="width:153px" %)**Function**|(% style="width:101px" %)**Response**
404 404  |(% style="width:191px" %)AT+NWKID=?|(% style="width:153px" %)Get the Network ID.|(% style="width:101px" %)a8 40 41 ff(((
... ... @@ -414,7 +414,7 @@
414 414  **AT Command: AT+NWKSKEY**
415 415  {{/info}}
416 416  
417 -(% border="1" style="background-color:#ffffcc; color:green; width:1017.22px" %)
328 +(% style="background-color:#ffffcc; color:green; width:1017.22px" %)
418 418  |=(% colspan="3" style="width: 1014px;" %)AT+NWKSKEY
419 419  |(% style="width:455px" %)**Command Example**|(% style="width:215px" %)**Function**|(% style="width:343px" %)**Response**
420 420  |(% style="width:455px" %)AT+NWKSKEY=?|(% style="width:215px" %)Get the Network Session Key.|(% style="width:343px" %)00 4f 19 25 52 ce 97 09 d7 fa 84 71 db 51 02 92(((
... ... @@ -432,7 +432,7 @@
432 432  **AT Command: AT+CFM**
433 433  {{/info}}
434 434  
435 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
346 +(% style="background-color:#ffffcc; color:green; width:710.222px" %)
436 436  |=(% colspan="3" style="width: 707px;" %)AT+CFM
437 437  |(% style="width:155px" %)**Command Example**|(% style="width:205px" %)**Function**|(% style="width:346px" %)**Response**
438 438  |(% style="width:155px" %)AT+CFM=?|(% style="width:205px" %)Get the confirmation mode|(% style="width:346px" %)0(((
... ... @@ -458,7 +458,7 @@
458 458  **AT Command: AT+CFS**
459 459  {{/info}}
460 460  
461 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
372 +(% style="background-color:#ffffcc; color:green; width:534.222px" %)
462 462  |=(% colspan="3" style="width: 531px;" %)AT+CFS
463 463  |(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:178px" %)**Response**
464 464  |(% style="width:156px" %)AT+CFS=?|(% style="width:193px" %)Get confirmation status|(% style="width:178px" %)0(((
... ... @@ -473,7 +473,7 @@
473 473  **AT Command: AT+JOIN**
474 474  {{/info}}
475 475  
476 -(% border="1" style="background-color:#ffffcc; color:green; width:647.222px" %)
387 +(% style="background-color:#ffffcc; color:green; width:647.222px" %)
477 477  |=(% colspan="3" style="width: 644px;" %)AT+JOIN
478 478  |(% style="width:163px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:334px" %)**Response**
479 479  |(% style="width:163px" %)AT+JOIN ?|(% style="width:147px" %)Get imformation.|(% style="width:334px" %)AT+JOIN: Join network(((
... ... @@ -490,7 +490,7 @@
490 490  **AT Command: AT+NJM**
491 491  {{/info}}
492 492  
493 -(% border="1" style="background-color:#ffffcc; color:green; width:753.222px" %)
404 +(% style="background-color:#ffffcc; color:green; width:753.222px" %)
494 494  |=(% colspan="3" style="width: 750px;" %)AT+NJM
495 495  |(% style="width:162px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:361px" %)**Response**
496 496  |(% style="width:162px" %)AT+NJM=?|(% style="width:227px" %)Get the Network Join Mode|(% style="width:361px" %)1(((
... ... @@ -518,7 +518,7 @@
518 518  **AT Command: AT+NJS**
519 519  {{/info}}
520 520  
521 -(% border="1" style="background-color:#ffffcc; color:green; width:498.222px" %)
432 +(% style="background-color:#ffffcc; color:green; width:498.222px" %)
522 522  |=(% colspan="3" style="width: 495px;" %)AT+NJS
523 523  |(% style="width:169px" %)**Command Example**|(% style="width:164px" %)**Function**|(% style="width:161px" %)**Response**
524 524  |(% style="width:169px" %)AT+NJS=?|(% style="width:164px" %)Get the join status.|(% style="width:161px" %)0(((
... ... @@ -533,7 +533,7 @@
533 533  **AT Command: AT+RECV**
534 534  {{/info}}
535 535  
536 -(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
447 +(% style="background-color:#ffffcc; color:green; width:587.222px" %)
537 537  |=(% colspan="3" style="width: 584px;" %)AT+RECV
538 538  |(% style="width:161px" %)**Command Example**|(% style="width:272px" %)**Function**|(% style="width:150px" %)**Response**
539 539  |(% style="width:161px" %)AT+RECV=?|(% style="width:272px" %)print last received data in raw format.|(% style="width:150px" %)0:(((
... ... @@ -548,7 +548,7 @@
548 548  **AT Command: AT+RECVB**
549 549  {{/info}}
550 550  
551 -(% border="1" style="background-color:#ffffcc; color:green; width:793.222px" %)
462 +(% style="background-color:#ffffcc; color:green; width:793.222px" %)
552 552  |=(% colspan="3" style="width: 790px;" %)AT+RECVB
553 553  |(% style="width:173px" %)**Command Example**|(% style="width:497px" %)**Function**|(% style="width:120px" %)**Response**
554 554  |(% style="width:173px" %)AT+RECVB=?|(% style="width:497px" %)print last received data in binary format (with hexadecimal values).|(% style="width:120px" %)2: 0010(((
... ... @@ -563,7 +563,7 @@
563 563  **AT Command: AT+SEND**
564 564  {{/info}}
565 565  
566 -(% border="1" style="background-color:#ffffcc; color:green; width:991.222px" %)
477 +(% style="background-color:#ffffcc; color:green; width:991.222px" %)
567 567  |=(% colspan="3" style="width: 988px;" %)AT+SEND
568 568  |(% style="width:201px" %)**Command Example**|(% style="width:340px" %)**Function**|(% style="width:446px" %)**Response**
569 569  |(% style="width:201px" %)AT+SEND=12:hello world|(% style="width:340px" %)Send text data along with the application port.|(% style="width:446px" %)OK(((
... ... @@ -582,7 +582,7 @@
582 582  **AT Command: AT+SENDB**
583 583  {{/info}}
584 584  
585 -(% border="1" style="background-color:#ffffcc; color:green; width:1120.22px" %)
496 +(% style="background-color:#ffffcc; color:green; width:1120.22px" %)
586 586  |=(% colspan="3" style="width: 1117px;" %)AT+SENDB
587 587  |(% style="width:257px" %)**Command Example**|(% style="width:406px" %)**Function**|(% style="width:453px" %)**Response**
588 588  |(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)OK
... ... @@ -602,7 +602,7 @@
602 602  **AT Command: AT+ADR**
603 603  {{/info}}
604 604  
605 -(% border="1" style="background-color:#ffffcc; color:green; width:683.222px" %)
516 +(% style="background-color:#ffffcc; color:green; width:683.222px" %)
606 606  |=(% colspan="3" style="width: 680px;" %)AT+ADR
607 607  |(% style="width:162px" %)**Command Example**|(% style="width:266px" %)**Function**|(% style="width:250px" %)**Response**
608 608  |(% style="width:162px" %)AT+ADR=?|(% style="width:266px" %)Get the Adaptive Data Rate setting.|(% style="width:250px" %)1(((
... ... @@ -631,7 +631,7 @@
631 631  **AT Command:AT+CLASS**
632 632  {{/info}}
633 633  
634 -(% border="1" style="background-color:#ffffcc; color:green; width:507.222px" %)
545 +(% style="background-color:#ffffcc; color:green; width:507.222px" %)
635 635  |=(% colspan="3" style="width: 504px;" %)AT+CLASS
636 636  |(% style="width:163px" %)**Command Example**|(% style="width:166px" %)**Function**|(% style="width:175px" %)**Response**
637 637  |(% style="width:163px" %)AT+CLASS=?|(% style="width:166px" %)Get the Device Class.|(% style="width:175px" %)A(((
... ... @@ -649,7 +649,7 @@
649 649  **AT Command:AT+DCS**
650 650  {{/info}}
651 651  
652 -(% border="1" style="background-color:#ffffcc; color:green; width:515.222px" %)
563 +(% style="background-color:#ffffcc; color:green; width:515.222px" %)
653 653  |=(% colspan="3" style="width: 512px;" %)AT+DCS
654 654  |(% style="width:165px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:107px" %)**Response**
655 655  |(% style="width:165px" %)AT+DCS=?|(% style="width:239px" %)Get the ETSI Duty Cycle setting.|(% style="width:107px" %)1(((
... ... @@ -667,7 +667,7 @@
667 667  **AT Command: AT+DR**
668 668  {{/info}}
669 669  
670 -(% border="1" style="background-color:#ffffcc; color:green; width:466.222px" %)
581 +(% style="background-color:#ffffcc; color:green; width:466.222px" %)
671 671  |=(% colspan="3" style="width: 463px;" %)AT+DR
672 672  |(% style="width:156px" %)**Command Example**|(% style="width:167px" %)**Function**|(% style="width:140px" %)**Response**
673 673  |(% style="width:156px" %)AT+DR=?|(% style="width:167px" %)Get the Data Rate.|(% style="width:140px" %)5(((
... ... @@ -695,7 +695,7 @@
695 695  **AT Command:AT+FCD**
696 696  {{/info}}
697 697  
698 -(% border="1" style="background-color:#ffffcc; color:green; width:693.222px" %)
609 +(% style="background-color:#ffffcc; color:green; width:693.222px" %)
699 699  |=(% colspan="3" style="width: 690px;" %)AT+FCD
700 700  |(% style="width:162px" %)**Command Example**|(% style="width:258px" %)**Function**|(% style="width:269px" %)**Response**
701 701  |(% style="width:162px" %)AT+FCD=?|(% style="width:258px" %)Get the Frame Counter Downlink.|(% style="width:269px" %)0(((
... ... @@ -715,7 +715,7 @@
715 715  **AT Command:AT+FCU**
716 716  {{/info}}
717 717  
718 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
629 +(% style="background-color:#ffffcc; color:green; width:534.222px" %)
719 719  |=(% colspan="3" style="width: 531px;" %)AT+FCU
720 720  |(% style="width:177px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:113px" %)**Response**
721 721  |(% style="width:177px" %)AT+FCU=?|(% style="width:239px" %)Get the Frame Counter Uplink.|(% style="width:113px" %)0(((
... ... @@ -733,7 +733,7 @@
733 733  **AT Command:AT+JN1DL**
734 734  {{/info}}
735 735  
736 -(% border="1" style="background-color:#ffffcc; color:green; width:537.222px" %)
647 +(% style="background-color:#ffffcc; color:green; width:537.222px" %)
737 737  |=(% colspan="3" style="width: 534px;" %)AT+JN1DL
738 738  |(% style="width:164px" %)**Command Example**|(% style="width:229px" %)**Function**|(% style="width:140px" %)**Response**
739 739  |(% style="width:164px" %)AT+JN1DL=?|(% style="width:229px" %)Get the Join Accept Delay.|(% style="width:140px" %)5000(((
... ... @@ -751,7 +751,7 @@
751 751  **AT Command:AT+JN2DL**
752 752  {{/info}}
753 753  
754 -(% border="1" style="background-color:#ffffcc; color:green; width:538.222px" %)
665 +(% style="background-color:#ffffcc; color:green; width:538.222px" %)
755 755  |=(% colspan="3" style="width: 535px;" %)AT+JN2DL
756 756  |(% style="width:160px" %)**Command Example**|(% style="width:228px" %)**Function**|(% style="width:146px" %)**Response**
757 757  |(% style="width:160px" %)AT+JN2DL=?|(% style="width:228px" %)Get the Join Accept Delay.|(% style="width:146px" %)6000(((
... ... @@ -769,7 +769,7 @@
769 769  **AT Command:AT+PNM**
770 770  {{/info}}
771 771  
772 -(% border="1" style="background-color:#ffffcc; color:green; width:667.222px" %)
683 +(% style="background-color:#ffffcc; color:green; width:667.222px" %)
773 773  |=(% colspan="3" style="width: 664px;" %)AT+PNM
774 774  |(% style="width:166px" %)**Command Example**|(% style="width:225px" %)**Function**|(% style="width:272px" %)**Response**
775 775  |(% style="width:166px" %)AT+PNM=?|(% style="width:225px" %)Get the public network mode.|(% style="width:272px" %)1(((
... ... @@ -789,7 +789,7 @@
789 789  **AT Command:AT+RX1DL**
790 790  {{/info}}
791 791  
792 -(% border="1" style="background-color:#ffffcc; color:green; width:408.222px" %)
703 +(% style="background-color:#ffffcc; color:green; width:408.222px" %)
793 793  |=(% colspan="3" style="width: 405px;" %)AT+RX1DL
794 794  |(% style="width:155px" %)**Command Example**|(% style="width:128px" %)**Function**|(% style="width:122px" %)**Response**
795 795  |(% style="width:155px" %)AT+RX1DL=?|(% style="width:128px" %)Get the delay.|(% style="width:122px" %)1000(((
... ... @@ -799,21 +799,18 @@
799 799  
800 800  )))
801 801  
802 -== 7.11 Receive Delay2 ==
713 +== 7.11Receive Delay2 ==
803 803  
804 804  Feature: Get or Set the delay between the end of the Tx and the Rx Window 2 in ms
805 805  
806 -{{info}}
807 -**AT Command:AT+RX2DL**
808 -{{/info}}
717 +AT Command:AT+RX2DL
809 809  
810 -(% border="1" style="background-color:#ffffcc; color:green; width:481.222px" %)
811 -|=(% colspan="3" style="width: 478px;" %)AT+RX2DL
812 -|(% style="width:175px" %)**Command Example**|(% style="width:152px" %)**Function**|(% style="width:150px" %)**Response**
813 -|(% style="width:175px" %)AT+RX2DL=?|(% style="width:152px" %)Get the delay.|(% style="width:150px" %)2000(((
719 +|=(% colspan="3" %)AT+RX2DL
720 +|**Command Example**|**Function**|**Response**
721 +|AT+RX2DL=?|Get the delay.|2000(((
814 814  OK
815 815  )))
816 -|(% style="width:175px" %)AT+RX2DL=2500|(% style="width:152px" %)Set the delay.|(% style="width:150px" %)OK(((
724 +|AT+RX2DL=2500|Set the delay.|OK(((
817 817  
818 818  )))
819 819  
... ... @@ -821,17 +821,14 @@
821 821  
822 822  Feature: Get or Set the Rx2 window data rate (0-7 corresponding to DR_X)
823 823  
824 -{{info}}
825 -**AT Command:AT+RX2DR**
826 -{{/info}}
732 +AT Command:AT+RX2DR
827 827  
828 -(% border="1" style="background-color:#ffffcc; color:green; width:525.222px" %)
829 -|=(% colspan="3" style="width: 522px;" %)AT+RX2DR
830 -|(% style="width:160px" %)**Command Example**|(% style="width:232px" %)**Function**|(% style="width:130px" %)**Response**
831 -|(% style="width:160px" %)AT+RX2DR=?|(% style="width:232px" %)Get the Rx2 window data rate.|(% style="width:130px" %)2(((
734 +|=(% colspan="3" %)AT+RX2DR
735 +|**Command Example**|**Function**|**Response**
736 +|AT+RX2DR=?|Get the Rx2 window data rate.|2(((
832 832  OK
833 833  )))
834 -|(% style="width:160px" %)AT+RX2DR=6|(% style="width:232px" %)Set the Rx2 window data rate.|(% style="width:130px" %)OK(((
739 +|AT+RX2DR=6|Set the Rx2 window data rate.|OK(((
835 835  
836 836  )))
837 837  
... ... @@ -839,17 +839,14 @@
839 839  
840 840  Feature: Get or Set the Rx2 window frequency
841 841  
842 -{{info}}
843 -**AT Command:AT+RX2FQ**
844 -{{/info}}
747 +AT Command:AT+RX2FQ
845 845  
846 -(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
847 -|=(% colspan="3" style="width: 584px;" %)AT+RX2FQ
848 -|(% style="width:183px" %)**Command Example**|(% style="width:240px" %)**Function**|(% style="width:160px" %)**Response**
849 -|(% style="width:183px" %)AT+RX2FQ=?|(% style="width:240px" %)Get the Rx2 window frequency.|(% style="width:160px" %)434665000(((
749 +|=(% colspan="3" %)AT+RX2FQ
750 +|**Command Example**|**Function**|**Response**
751 +|AT+RX2FQ=?|Get the Rx2 window frequency.|434665000(((
850 850  OK
851 851  )))
852 -|(% style="width:183px" %)AT+RX2FQ=434665000|(% style="width:240px" %)Set the Rx2 window frequency.|(% style="width:160px" %)OK(((
754 +|AT+RX2FQ=434665000|Set the Rx2 window frequency.|OK(((
853 853  
854 854  )))
855 855  
... ... @@ -857,17 +857,14 @@
857 857  
858 858  Feature: Get or Set the Transmit Power(0-5, MAX:0, MIN:5, according to LoRaWAN Spec, or 40=10dB, 41 = 11dB, …, 50 = 20dB which is out of LoRaWAN spec. )
859 859  
860 -{{info}}
861 -**AT Command:AT+TXP**
862 -{{/info}}
762 +AT Command:AT+TXP
863 863  
864 -(% border="1" style="background-color:#ffffcc; color:green; width:465.222px" %)
865 -|=(% colspan="3" style="width: 462px;" %)AT+TXP
866 -|(% style="width:161px" %)**Command Example**|(% style="width:189px" %)**Function**|(% style="width:112px" %)**Response**
867 -|(% style="width:161px" %)AT+TXP=?|(% style="width:189px" %)Get the Transmit Power.|(% style="width:112px" %)0(((
764 +|=(% colspan="3" %)AT+TXP
765 +|**Command Example**|**Function**|**Response**
766 +|AT+TXP=?|Get the Transmit Power.|0(((
868 868  OK
869 869  )))
870 -|(% style="width:161px" %)AT+TXP=1|(% style="width:189px" %)Set the Transmit Power.|(% style="width:112px" %)OK(((
769 +|AT+TXP=1|Set the Transmit Power.|OK(((
871 871  
872 872  )))
873 873  
... ... @@ -875,21 +875,18 @@
875 875  
876 876  If the downlink payload=22000100, it means setting the TXP to 0.
877 877  
878 -* **Example 1**: Downlink Payload: **22000102** ~/~/ Set AT+TXP=2.
879 -* **Example 2**: Downlink Payload: **220000FF** ~/~/ Set AT+TXP=0.
777 +* Example 1: Downlink Payload: 22000102 ~/~/ Set AT+TXP=2.
778 +* Example 2: Downlink Payload: 220000FF ~/~/ Set AT+TXP=0.
880 880  
881 881  == 7.15 RSSI of the Last Received Packet ==
882 882  
883 883  Feature: Get or Set the Rx2 window frequency
884 884  
885 -{{info}}
886 -**AT Command:AT+RSSI**
887 -{{/info}}
784 +AT Command:AT+RSSI
888 888  
889 -(% border="1" style="background-color:#ffffcc; color:green; width:557.222px" %)
890 -|=(% colspan="3" style="width: 554px;" %)AT+RSSI
891 -|(% style="width:164px" %)**Command Example**|(% style="width:289px" %)**Function**|(% style="width:100px" %)**Response**
892 -|(% style="width:164px" %)AT+RSSI=?|(% style="width:289px" %)Get the RSSI of the last received packet.|(% style="width:100px" %)0(((
786 +|=(% colspan="3" %)AT+RSSI
787 +|**Command Example**|**Function**|**Response**
788 +|AT+RSSI=?|Get the RSSI of the last received packet.|0(((
893 893  OK
894 894  )))
895 895  
... ... @@ -897,14 +897,11 @@
897 897  
898 898  Feature: Get the SNR of the last received packet
899 899  
900 -{{info}}
901 -**AT Command:AT+SNR**
902 -{{/info}}
796 +AT Command:AT+SNR
903 903  
904 -(% border="1" style="background-color:#ffffcc; color:green; width:571.222px" %)
905 -|=(% colspan="3" style="width: 568px;" %)AT+SNR
906 -|(% style="width:164px" %)**Command Example**|(% style="width:290px" %)**Function**|(% style="width:113px" %)**Response**
907 -|(% style="width:164px" %)AT+SNR=?|(% style="width:290px" %)Get the RSSI of the last received packet.|(% style="width:113px" %)0(((
798 +|=(% colspan="3" %)AT+SNR
799 +|**Command Example**|**Function**|**Response**
800 +|AT+SNR=?|Get the RSSI of the last received packet.|0(((
908 908  OK
909 909  )))
910 910  
... ... @@ -912,144 +912,114 @@
912 912  
913 913  Feature: Get or set the application port.
914 914  
915 -{{info}}
916 -**AT Command: AT+PORT**
917 -{{/info}}
808 +AT Command: AT+PORT
918 918  
919 -(% border="1" style="background-color:#ffffcc; color:green; width:500.222px" %)
920 -|=(% colspan="3" style="width: 497px;" %)AT+PORT
921 -|(% style="width:157px" %)**Command Example**|(% style="width:204px" %)**Function**|(% style="width:135px" %)**Response**
922 -|(% style="width:157px" %)AT+PORT=?|(% style="width:204px" %)Get the application port|(% style="width:135px" %)21(((
810 +|=(% colspan="3" %)AT+PORT
811 +|**Command Example**|**Function**|**Response**
812 +|AT+PORT=?|Get the application port|21(((
923 923  OK
924 924  )))
925 -|(% style="width:157px" %)AT+PORT=21|(% style="width:204px" %)Set the application port|(% style="width:135px" %)OK
815 +|AT+PORT=21|Set the application port|OK
926 926  
927 -{{info}}
928 -**Downlink Command: 0x23**
929 -{{/info}}
817 +Downlink Command: 0x23
930 930  
931 931  Format: Command Code (0x23) followed by 1 bytes port value.
932 932  
933 933  If the downlink payload=2301, it means set the application port to 1, while type code is 23.
934 934  
935 -* **Example 1**: Downlink Payload: **2301** ~/~/ set the application port to 1
936 -* **Example 2**: Downlink Payload:** 2305** ~/~/ set the application port to 5
823 +* Example 1: Downlink Payload: 2301 ~/~/ set the application port to 1
824 +* Example 2: Downlink Payload: 2305 ~/~/ set the application port to 5
937 937  
938 938  == 7.18 Single Channel Mode ==
939 939  
940 940  Feature:Get or Set Frequency (Unit: Hz) for Single Channel Mode.
941 941  
942 -{{info}}
943 -**AT Command: AT+CHS**
944 -{{/info}}
830 +AT Command: AT+CHS
945 945  
946 -(% border="1" style="background-color:#ffffcc; color:green; width:603.222px" %)
947 -|=(% colspan="3" style="width: 600px;" %)AT+CHS
948 -|(% style="width:182px" %)**Command Example**|(% style="width:295px" %)**Function**|(% style="width:122px" %)**Response**
949 -|(% style="width:182px" %)AT+CHS=?|(% style="width:295px" %)Get Frequency for Single Channel Mode|(% style="width:122px" %)0(((
832 +|=(% colspan="3" %)AT+CHS
833 +|**Command Example**|**Function**|**Response**
834 +|AT+CHS=?|Get Frequency for Single Channel Mode|0(((
950 950  OK
951 951  )))
952 -|(% style="width:182px" %)AT+CHS=868100000|(% style="width:295px" %)Set Frequency for Single Channel Mode|(% style="width:122px" %)OK
837 +|AT+CHS=868100000|Set Frequency for Single Channel Mode|OK
953 953  
954 954  == 7.19 Eight Channel Mode ==
955 955  
956 956  Feature: Get or Set eight channels mode,Only for US915,AU915,CN470.
957 957  
958 -{{info}}
959 -**AT Command: AT+CHE**
960 -{{/info}}
843 +AT Command: AT+CHE
961 961  
962 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
963 -|=(% colspan="3" style="width: 707px;" %)AT+CHE
964 -|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
965 -|(% style="width:160px" %)AT+CHE=?|(% style="width:198px" %)Get eight channels mode|(% style="width:349px" %)1(((
845 +|=(% colspan="3" %)AT+CHE
846 +|**Command Example**|**Function**|**Response**
847 +|AT+CHE=?|Get eight channels mode|1(((
966 966  902.3 902.5 902.7 902.9 903.1 903.3 903.5 903.7
967 967  
968 968  OK
969 969  )))
970 -|(% style="width:160px" %)AT+CHE=1|(% style="width:198px" %)Set eight channels mode|(% style="width:349px" %)OK
852 +|AT+CHE=1|Set eight channels mode|OK
971 971  
972 -{{info}}
973 -**Downlink Command: 0x24**
974 -{{/info}}
854 +Downlink Command: 0x24
975 975  
976 976  Format: Command Code (0x24) followed by 1 bytes channel value.
977 977  
978 978  If the downlink payload=2401, it means set channel mode to 1, while type code is 24.
979 979  
980 -* **Example 1**: Downlink Payload: 2401 ~/~/ set channel mode to 1
981 -* **Example 2**: Downlink Payload: 2405 ~/~/ set channel mode to 5
860 +* Example 1: Downlink Payload: 2401 ~/~/ set channel mode to 1
861 +* Example 2: Downlink Payload: 2405 ~/~/ set channel mode to 5
982 982  
983 983  == 7.20 Get or Set RXwindows1 timeout ==
984 984  
985 985  Feature:Get or Set the number of symbols to detect and timeout from RXwindow1(0 to 255).
986 986  
987 -{{info}}
988 -**AT Command: AT+RX1WTO**
989 -{{/info}}
867 +AT Command: AT+RX1WTO
990 990  
991 -(% border="1" style="background-color:#ffffcc; color:green; width:460.222px" %)
992 -|=(% colspan="3" style="width: 457px;" %)AT+ RX1WTO
993 -|(% style="width:163px" %)**Command Example**|(% style="width:201px" %)**Function**|(% style="width:93px" %)**Response**
994 -|(% style="width:163px" %)AT+RX1WTO=?|(% style="width:201px" %)Get RXwindows1 timeout|(% style="width:93px" %)14(((
869 +|=(% colspan="3" %)AT+ RX1WTO
870 +|**Command Example**|**Function**|**Response**
871 +|AT+RX1WTO=?|Get RXwindows1 timeout|14(((
995 995  OK
996 996  )))
997 -|(% style="width:163px" %)AT+RX1WTO=60|(% style="width:201px" %)Set RXwindows1 timeout|(% style="width:93px" %)OK
874 +|AT+RX1WTO=60|Set RXwindows1 timeout|OK
998 998  
999 -(((
1000 -**AT+RX1TWO** is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
1001 -)))
876 +AT+RX1TWO is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
1002 1002  
1003 -[[image:image-20220526162535-1.png]]
878 +[[~[~[image:https://wiki.dragino.com/images/thumb/5/51/RX1WTO.JPG/600px-RX1WTO.JPG~|~|alt="RX1WTO.JPG" height="239" width="600"~]~]>>url:https://wiki.dragino.com/index.php/File:RX1WTO.JPG]]
1004 1004  
1005 -(((
1006 1006  Increasing thisvalue is equal to extending the time that the receiving window is opened, butthe corresponding power consumption will also increase. Properly increasingthis value can increase the success rate of the downlink.
1007 1007  
1008 -
1009 -)))
1010 -
1011 1011  == 7.21 Get or Set RXwindows2 timeout ==
1012 1012  
1013 1013  Feature:Get or Set the number of symbols to detect and timeout from RXwindow2(0 to 255).
1014 1014  
1015 -{{info}}
1016 -**AT Command: AT+RX2WTO**
1017 -{{/info}}
886 +AT Command: AT+RX2WTO
1018 1018  
1019 -(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
1020 -|=(% colspan="3" style="width: 494px;" %)AT+ RX2WTO
1021 -|(% style="width:190px" %)**Command Example**|(% style="width:199px" %)**Function**|(% style="width:104px" %)**Response**
1022 -|(% style="width:190px" %)AT+RX2WTO=?|(% style="width:199px" %)Get RXwindows2 timeout|(% style="width:104px" %)7(((
888 +|=(% colspan="3" %)AT+ RX2WTO
889 +|**Command Example**|**Function**|**Response**
890 +|AT+RX2WTO=?|Get RXwindows2 timeout|7(((
1023 1023  OK
1024 1024  )))
1025 -|(% style="width:190px" %)AT+RX2WTO=20|(% style="width:199px" %)Set RXwindows2 timeout|(% style="width:104px" %)OK
893 +|AT+RX2WTO=20|Set RXwindows2 timeout|OK
1026 1026  
1027 1027  == 7.22 Setting up uplinkdwelltime (as923, au915) ==
1028 1028  
1029 1029  Feature: Get or Set uplinkdwelltime
1030 1030  
1031 -{{info}}
1032 -**AT Command: AT+DWELLT**
1033 -{{/info}}
899 +AT Command: AT+DWELLT
1034 1034  
1035 -(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
1036 -|=(% colspan="3" style="width: 494px;" %)AT+DWELLT
1037 -|(% style="width:183px" %)**Command Example**|(% style="width:179px" %)**Function**|(% style="width:131px" %)**Response**
1038 -|(% style="width:183px" %)AT+DWELLT=?|(% style="width:179px" %)Get uplinkdwelltime|(% style="width:131px" %)1(((
901 +|=(% colspan="3" %)AT+DWELLT
902 +|**Command Example**|**Function**|**Response**
903 +|AT+DWELLT=?|Get uplinkdwelltime|1(((
1039 1039  OK
1040 1040  )))
1041 -|(% style="width:183px" %)AT+DWELLT=0|(% style="width:179px" %)Set uplinkdwelltime|(% style="width:131px" %)OK
906 +|AT+DWELLT=0|Set uplinkdwelltime|OK
1042 1042  
1043 -{{info}}
1044 -**Downlink Command: 0x25**
1045 -{{/info}}
908 +Downlink Command: 0x25
1046 1046  
1047 1047  Format: Command Code (0x25) followed by 1 bytes state value.
1048 1048  
1049 1049  If the downlink payload=2501, it means set uplinkdwelltime to 1, while type code is 25.
1050 1050  
1051 -* **Example 1**: Downlink Payload: **2501** ~/~/ set uplinkdwelltime to 1
1052 -* **Example 2**: Downlink Payload: **2500** ~/~/ set uplinkdwelltime to 0
914 +* Example 1: Downlink Payload: 2501 ~/~/ set uplinkdwelltime to 1
915 +* Example 2: Downlink Payload: 2500 ~/~/ set uplinkdwelltime to 0
1053 1053  
1054 1054  == 7.23 Set Packet Receiving Response Level ==
1055 1055  
... ... @@ -1057,11 +1057,11 @@
1057 1057  
1058 1058  RPL value:
1059 1059  
1060 -* **AT+RPL=0:** Device won't immediately reply any downlink commands from platform.
1061 -* **AT+RPL=1:** Device will immediately reply message to Unconfirmed Data Down. Payload is 0x00.
1062 -* **AT+RPL=2:** Device will immediately reply message to Confirmed Data Down. Payload is 0x00 and requied response header for this command.
1063 -* **AT+RPL=3:** Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command.
1064 -* **AT+RPL=4: **Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands.
923 +* AT+RPL=0: Device won't immediately reply any downlink commands from platform.
924 +* AT+RPL=1: Device will immediately reply message to Unconfirmed Data Down. Payload is 0x00.
925 +* AT+RPL=2: Device will immediately reply message to Confirmed Data Down. Payload is 0x00 and requied response header for this command.
926 +* AT+RPL=3: Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command.
927 +* AT+RPL=4: Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands.
1065 1065  
1066 1066  Case Analyes:
1067 1067  
... ... @@ -1069,44 +1069,37 @@
1069 1069  * For Class C devices used in ChirpStack, need to set AT+RPL=4 because Chirpstack require immedietely reply message to MAC Command.
1070 1070  * For Class C devices used in TTI, need to set AT+RPL=4 because TTI require immediately reply message to Confirmed Data Down & MAC Command.
1071 1071  
1072 -{{info}}
1073 -**AT Command: AT+RPL**
1074 -{{/info}}
935 +AT Command: AT+RPL
1075 1075  
1076 -(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1077 -|=(% colspan="3" style="width: 533px;" %)AT+RPL
1078 -|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1079 -|(% style="width:160px" %)AT+RPL=?|(% style="width:263px" %)Get packet receiving response level|(% style="width:109px" %)1(((
937 +|=(% colspan="3" %)AT+RPL
938 +|**Command Example**|**Function**|**Response**
939 +|AT+RPL=?|Get packet receiving response level|1(((
1080 1080  OK
1081 1081  )))
1082 -|(% style="width:160px" %)AT+RPL=0|(% style="width:263px" %)Set packet receiving response level|(% style="width:109px" %)OK
942 +|AT+RPL=0|Set packet receiving response level|OK
1083 1083  
1084 -{{info}}
1085 -**Downlink Command: 0x21**
1086 -{{/info}}
944 +Downlink Command: 0x21
1087 1087  
1088 1088  Format: Command Code (0x21) followed by 1 bytes level value.
1089 1089  
1090 1090  If the downlink payload=2101, it means set packet receiving response level to 1, while type code is 21.
1091 1091  
1092 -* **Example 1**: Downlink Payload: **2101** ~/~/ set packet receiving response level to 1
1093 -* **Example 2**: Downlink Payload: **2102** ~/~/ set packet receiving response level to 2
950 +* Example 1: Downlink Payload: 2101 ~/~/ set packet receiving response level to 1
951 +* Example 2: Downlink Payload: 2102 ~/~/ set packet receiving response level to 2
1094 1094  
1095 1095  = 8. AT Commands Combination =
1096 1096  
1097 1097  == 8.1 Set a fix RX2DR for downlink window ==
1098 1098  
1099 -* **AT+ADR=0 **~-~-> Disable ADR first
1100 -* **AT+RX2DR=xxxx** ~-~-> Set xxxx to your wanted DataRate
957 +* AT+ADR=0 ~-~-> Disable ADR first
958 +* AT+RX2DR=xxxx ~-~-> Set xxxx to your wanted DataRate
1101 1101  
1102 1102  == 8.2 Use Downlink Command to set a fix uplink DR ==
1103 1103  
1104 -{{info}}
1105 -**Downlink Command: 0x22000500**
1106 -{{/info}}
962 +Downlink Command: 0x22000500
1107 1107  
1108 1108  Same as:
1109 1109  
1110 -* AT+ADR=0  [[Reference>>||anchor="H7.1AdaptiveDataRate"]]
1111 -* AT+DR=5  [[Reference>>||anchor="H7.4DataRate"]]
1112 -* AT+TXP=0  [[Reference>>||anchor="H7.14TransmitPower"]]
966 +* AT+ADR=0 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Adaptive_Data_Rate]]
967 +* AT+DR=5 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Data_Rate]]
968 +* AT+TXP=0 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Transmit_Power]]
image-20220511120050-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -136.3 KB
Content
image-20220526162535-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -149.4 KB
Content

Applications

Navigation

Copyright ©2010-2022 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0