<
From version < 38.3 >
edited by Xiaoling
on 2022/05/30 10:48
To version < 7.8 >
edited by Xiaoling
on 2022/05/11 11:17
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,9 +1,8 @@
1 - **Contents:**
1 +Contens
2 2  
3 3  {{toc/}}
4 4  
5 5  
6 -
7 7  = 1. Introduction =
8 8  
9 9  Dragino LoRaWAN End Node support two types of AT Commands and Downlink Commands:
... ... @@ -11,95 +11,34 @@
11 11  * **Common Commands:** They should be available for each sensor, such as: change uplink interval, reset device.
12 12  * **Sensor Related Commands:** Only for special sensor, such as control relay, poll RS485 device.
13 13  
14 -(((
15 15  **This page shows the common commands since Dragino LoRaWAN stack DR-LWS-005. Make sure the end node support stack higher than DR-LWS-005 before checking this page.**
16 16  
17 -)))
18 18  
19 19  = 2. How to use AT Commands or Downlink command =
20 20  
21 21  * For AT Command , See Devices User Manual for Device. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
22 22  * For LoRaWAN Downlink: The gateway transfer downlink command in HEX format. This page shows the HEX format downlink code for each command. but some servers use base64 as downlink code. Below are reference for how to use downlink command:
23 -** Use HEX format to send a downlink: [[TTN v3>>doc:Main.Notes for TTN.WebHome]]
24 -** Use Base64 format to send a downlink: [[Chirpstack>>doc:Main.Notes for ChirpStack.WebHome]].
25 -** See use note for more serves [[Servers Note>>doc:Main.WebHome]](IoT LoRaWAN Server)
20 +** Use HEX format to send a downlink: [[TTN v3>>url:https://wiki.dragino.com/index.php/Notes_for_TTN#Send_Downlink_message]]
21 +** Use Base64 format to send a downlink: [[Chirpstack>>url:https://wiki.dragino.com/index.php/Notes_for_ChirpStack#Downlink]].
22 +** See use note for more serves [[Servers Note>>url:https://wiki.dragino.com/index.php/Main_Page#Use_Note_for_Server]]
26 26  
27 -
28 -
29 29  = 3. Support End Node and firmware version =
30 30  
31 -(% border="1" style="background-color:#ffffcc; color:green; width:966px" %)
32 -|=(% colspan="3" style="width: 963px;" %)(((
33 -Dragino STM32 base hardware Firmware / LoRaWAN stack list
34 -)))
35 -|(% style="width:187px" %)(((
36 -**Model**
37 -)))|(% style="width:330px" %)(((
38 -**Description**
39 -)))|(% style="width:445px" %)(((
40 -**Firmware Version <~-~-> Stack Version**
41 -)))
42 -|(% style="width:187px" %)(((
43 -[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],
44 -)))|(% style="width:330px" %)(((
45 -Open Source Generic LoRaWAN Sensor Node
46 -)))|(% style="width:445px" %)(((
47 -(((
48 -LSN50 v1.6.0 <~-~-> DR-LWS-003;
49 -)))
50 -
51 -(((
52 -(((
26 +(% style="background-color:#ffffcc; color:green; width:995.222px" %)
27 +|=(% colspan="3" style="width: 992px;" %)Dragino STM32 base hardware Firmware / LoRaWAN stack list
28 +|(% style="width:187px" %)**Model**|(% style="width:349px" %)**Description**|(% style="width:453px" %)**Firmware Version <~-~-> Stack Version**
29 +|(% style="width:187px" %)[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],|(% style="width:349px" %)Open Source Generic LoRaWAN Sensor Node|(% style="width:453px" %)LSN50 v1.6.0 <~-~-> DR-LWS-003;(((
53 53  LSN50 v1.7.0 <~-~-> DR-LWS-005; ~-~-> Support since this version
54 54  )))
55 -)))
56 -)))
57 -|(% style="width:187px" %)(((
58 -[[LGT92>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/142-lgt-92.html]],
59 -)))|(% style="width:330px" %)(((
60 -LoRaWAN GPS Tracker
61 -)))|(% style="width:445px" %)(((
62 -(((
63 -LGT92 v1.6.3 <~-~-> DR-LWS-003;
64 -)))
65 -
66 -(((
67 -(((
32 +|(% style="width:187px" %)[[LGT92>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/142-lgt-92.html]],|(% style="width:349px" %)LoRaWAN GPS Tracker|(% style="width:453px" %)LGT92 v1.6.3 <~-~-> DR-LWS-003;(((
68 68  LGT92 v1.6.4 <~-~-> DR-LWS-005;~-~-> Support since this version
69 69  )))
70 -)))
71 -)))
72 -|(% style="width:187px" %)(((
73 -[[LBT1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/165-lbt1.html]],
74 -)))|(% style="width:330px" %)(((
75 -LoRaWAN BLE Indoor Tracker
76 -)))|(% style="width:445px" %)(((
77 -LBT1 v1.0 <~-~-> DR-LWS-005;
78 -)))
79 -|(% style="width:187px" %)(((
80 -[[RS485-LN>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/154-rs485-ln.html]],
81 -)))|(% style="width:330px" %)(((
82 -LoRaWAN RS485 Modbus Converter
83 -)))|(% style="width:445px" %)(((
84 -RS485-LN v1.3 <~-~-> DR-LWS-005;
85 -)))
86 -|(% style="width:187px" %)(((
87 -[[LHT65>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/151-lht65.html]],
88 -)))|(% style="width:330px" %)(((
89 -LoRaWAN Temperature & Humidity Sensor
90 -)))|(% style="width:445px" %)(((
91 -(((
92 -LHT65 v1.7 <~-~-> DR-LWS-003;
93 -)))
94 -
95 -(((
96 -(((
35 +|(% style="width:187px" %)[[LBT1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/165-lbt1.html]],|(% style="width:349px" %)LoRaWAN BLE Indoor Tracker|(% style="width:453px" %)LBT1 v1.0 <~-~-> DR-LWS-005;
36 +|(% style="width:187px" %)[[RS485-LN>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/154-rs485-ln.html]],|(% style="width:349px" %)LoRaWAN RS485 Modbus Converter|(% style="width:453px" %)RS485-LN v1.3 <~-~-> DR-LWS-005;
37 +|(% style="width:187px" %)[[LHT65>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/151-lht65.html]],|(% style="width:349px" %)LoRaWAN Temperature & Humidity Sensor|(% style="width:453px" %)LHT65 v1.7 <~-~-> DR-LWS-003;(((
97 97  LHT65 v1.8.0 <~-~-> DR-LWS-005;~-~-> Support since this version
98 98  )))
99 -)))
100 -)))
101 101  
102 -
103 103  = 4. System Management Commands =
104 104  
105 105  == 4.1 Change Uplink Interval ==
... ... @@ -111,7 +111,7 @@
111 111  **AT Command: AT+TDC**
112 112  )))
113 113  
114 -(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
52 +(% style="background-color:#ffffcc; color:green; width:727.222px" %)
115 115  |=(% colspan="3" style="width: 724px;" %)AT+TDC
116 116  |(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
117 117  |(% style="width:165px" %)AT+TDC=?|(% style="width:227px" %)Show current transmit Interval|(% style="width:329px" %)30000(((
... ... @@ -127,18 +127,13 @@
127 127  **Downlink Command: 0x01**
128 128  {{/info}}
129 129  
130 -(((
131 131  Format: Command Code (0x01) followed by 3 bytes time value.
132 -)))
133 133  
134 -(((
135 135  If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
136 -)))
137 137  
138 138  * **Example 1**: Downlink Payload:** 0100001E** ~/~/ Set Transmit Interval (TDC) = 30 seconds
139 139  * **Example 2**: Downlink Payload:** 0100003C** ~/~/ Set Transmit Interval (TDC) = 60 seconds
140 140  
141 -
142 142  == 4.2 Reboot End Node ==
143 143  
144 144  Feature: Reboot End Node to perform a new OTAA or ABP Join.
... ... @@ -147,7 +147,7 @@
147 147  **AT Command: ATZ**
148 148  {{/info}}
149 149  
150 -(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
83 +(% border="0" style="background-color:#ffffcc; color:green; width:727.222px" %)
151 151  |=(% colspan="3" %)ATZ: Trig a reset of the MCU
152 152  |**Command Example**|**Function**|**Response**
153 153  |ATZ|Reset MCU|(((
... ... @@ -168,16 +168,10 @@
168 168  **Downlink Command: 0x04**
169 169  {{/info}}
170 170  
171 -(((
172 172  Format: Command Code (0x04) followed by FF.
173 -)))
174 174  
175 -(((
176 176  If the downlink payload=**04FF**, the end node will reboot.
177 177  
178 -
179 -)))
180 -
181 181  == 4.3 Reset to factory Default ==
182 182  
183 183  Feature: Reset the parameters to Factory Default, factory default value depends on the firmware settings, the OTAA and ABP keys will reserve after this command.
... ... @@ -186,7 +186,7 @@
186 186  **AT Command: AT+FDR**
187 187  {{/info}}
188 188  
189 -(% border="1" style="background-color:#ffffcc; color:green; width:831.222px" %)
116 +(% style="background-color:#ffffcc; color:green; width:831.222px" %)
190 190  |=(% colspan="3" style="width: 828px;" %)Reset to factory default
191 191  |(% style="width:181px" %)**Command Example**|(% style="width:181px" %)**Function**|(% style="width:465px" %)**Response**
192 192  |(% style="width:181px" %)AT+FDR|(% style="width:181px" %)Reset to factory default|(% style="width:465px" %)(((
... ... @@ -207,13 +207,9 @@
207 207  **Downlink Command: 0x04**
208 208  {{/info}}
209 209  
210 -(((
211 211  Format: Command Code (0x04) followed by FE.
212 -)))
213 213  
214 -(((
215 215  If the downlink payload=**04FE**, Reset Parameters to Factory Default, Keys Reserve.
216 -)))
217 217  
218 218  
219 219  == 4.4 Show Firmware Version ==
... ... @@ -224,10 +224,10 @@
224 224  **AT Command: AT+VER**
225 225  {{/info}}
226 226  
227 -(% border="1" style="background-color:#ffffcc; color:green; width:586px" %)
228 -|=(% colspan="3" style="width: 583px;" %)AT+VER: Image Version and Frequency Band
229 -|(% style="width:170px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:113px" %)**Response**
230 -|(% style="width:170px" %)AT+VER=?|(% style="width:300px" %)Show Image version and Frequency Band|(% style="width:113px" %)(((
150 +(% style="background-color:#ffffcc; color:green" %)
151 +|=(% colspan="3" %)AT+VER: Image Version and Frequency Band
152 +|**Command Example**|**Function**|**Response**
153 +|AT+VER=?|Show Image version and Frequency Band|(((
231 231  1.3 EU868
232 232  
233 233  OK
... ... @@ -237,25 +237,17 @@
237 237  **Downlink Command: 0x26 (Valid in 006 stack)**
238 238  {{/info}}
239 239  
240 -(((
241 241  Downlink Format: 0x26
242 -)))
243 243  
244 -(((
245 245  Device will reply with firmware version info, device info. frequency band info. detail please check device user manual. Total 5 bytes Example: If device is of firmware version 1.1.0 Upload: xx ~-~- yy ~-~- zz ~-~- 110 total 5 bytes
246 -)))
247 247  
248 -(((
249 249  **xx: Software Type:**
250 -)))
251 251  
252 252  * 0x00 01: LGT92 Version
253 253  * 0x00 02: LBT1
254 254  * 0x00 03: LSE01/LDDS75/LDDS20/LSPH01/LLMS01/LSNPK01
255 255  
256 -(((
257 257  **yy: Frequency Band:**
258 -)))
259 259  
260 260  * 0x01: EU868
261 261  * 0x02: US915
... ... @@ -268,9 +268,7 @@
268 268  * 0x09: AS923-2
269 269  * 0xa0: AS923-3
270 270  
271 -(((
272 272  **zz: Subband**
273 -)))
274 274  
275 275  firmware version: v1.1.0 ~-~-> 110
276 276  
... ... @@ -283,7 +283,7 @@
283 283  **AT Command: AT+CFG**
284 284  {{/info}}
285 285  
286 -(% border="1" style="background-color:#ffffcc; color:green; width:599.222px" %)
199 +(% style="background-color:#ffffcc; color:green; width:599.222px" %)
287 287  |=(% colspan="3" style="width: 596px;" %)AT+CFG: Print all configurations
288 288  |(% style="width:160px" %)**Command Example**|(% style="width:154px" %)**Function**|(% style="width:280px" %)**Response**
289 289  |(% style="width:160px" %)AT+CFG|(% style="width:154px" %)Show all configures|(% style="width:280px" %)(((
... ... @@ -310,7 +310,7 @@
310 310  **AT Command: AT+APPEUI**
311 311  {{/info}}
312 312  
313 -(% border="1" style="background-color:#ffffcc; color:green; width:686.222px" %)
226 +(% style="background-color:#ffffcc; color:green; width:686.222px" %)
314 314  |=(% colspan="3" style="width: 683px;" %)AT+APPEUI
315 315  |(% style="width:305px" %)**Command Example**|(% style="width:186px" %)**Function**|(% style="width:191px" %)**Response**
316 316  |(% style="width:305px" %)AT+APPEUI=?|(% style="width:186px" %)Get the Application EUI|(% style="width:191px" %)00 b3 d5 00 00 00 00 00(((
... ... @@ -326,7 +326,7 @@
326 326  **AT Command: AT+APPKEY**
327 327  {{/info}}
328 328  
329 -(% border="1" style="background-color:#ffffcc; color:green; width:976.222px" %)
242 +(% style="background-color:#ffffcc; color:green; width:976.222px" %)
330 330  |=(% colspan="3" style="width: 973px;" %)AT+APPKEY
331 331  |(% style="width:441px" %)**Command Example**|(% style="width:180px" %)**Function**|(% style="width:350px" %)**Response**
332 332  |(% style="width:441px" %)AT+APPKEY=?|(% style="width:180px" %)Get the Application Key|(% style="width:350px" %)00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35(((
... ... @@ -342,7 +342,7 @@
342 342  **AT Command: AT+APPSKEY**
343 343  {{/info}}
344 344  
345 -(% border="1" style="background-color:#ffffcc; color:green; width:1040.22px" %)
258 +(% style="background-color:#ffffcc; color:green; width:1040.22px" %)
346 346  |=(% colspan="3" style="width: 1037px;" %)AT+APPSKEY
347 347  |(% style="width:451px" %)**Command Example**|(% style="width:231px" %)**Function**|(% style="width:354px" %)**Response**
348 348  |(% style="width:451px" %)AT+APPSKEY=?|(% style="width:231px" %)Get the Application Session Key|(% style="width:354px" %)00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2(((
... ... @@ -360,7 +360,7 @@
360 360  **AT Command: AT+DADDR**
361 361  {{/info}}
362 362  
363 -(% border="1" style="background-color:#ffffcc; color:green; width:795.222px" %)
276 +(% style="background-color:#ffffcc; color:green; width:795.222px" %)
364 364  |=(% colspan="3" style="width: 792px;" %)AT+DADDR
365 365  |(% style="width:192px" %)**Command Example**|(% style="width:241px" %)**Function**|(% style="width:359px" %)**Response**
366 366  |(% style="width:192px" %)AT+DADDR=?|(% style="width:241px" %)Get the Application Session Key.|(% style="width:359px" %)(While Error in format, return AT_PARAM_ERROR)(((
... ... @@ -378,7 +378,7 @@
378 378  **AT Command: AT+DEUI**
379 379  {{/info}}
380 380  
381 -(% border="1" style="background-color:#ffffcc; color:green; width:1035.22px" %)
294 +(% style="background-color:#ffffcc; color:green; width:1035.22px" %)
382 382  |=(% colspan="3" style="width: 1032px;" %)AT+DEUI
383 383  |(% style="width:250px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:634px" %)**Response**
384 384  |(% style="width:250px" %)AT+DEUI=?|(% style="width:147px" %)Get the Device EUI.|(% style="width:634px" %)00 44 34 22 33 45 55 55(((
... ... @@ -396,7 +396,7 @@
396 396  **AT Command: AT+NWKID**
397 397  {{/info}}
398 398  
399 -(% border="1" style="background-color:#ffffcc; color:green; width:448.222px" %)
312 +(% style="background-color:#ffffcc; color:green; width:448.222px" %)
400 400  |=(% colspan="3" style="width: 445px;" %)AT+NWKID
401 401  |(% style="width:191px" %)**Command Example**|(% style="width:153px" %)**Function**|(% style="width:101px" %)**Response**
402 402  |(% style="width:191px" %)AT+NWKID=?|(% style="width:153px" %)Get the Network ID.|(% style="width:101px" %)a8 40 41 ff(((
... ... @@ -412,7 +412,7 @@
412 412  **AT Command: AT+NWKSKEY**
413 413  {{/info}}
414 414  
415 -(% border="1" style="background-color:#ffffcc; color:green; width:1017.22px" %)
328 +(% style="background-color:#ffffcc; color:green; width:1017.22px" %)
416 416  |=(% colspan="3" style="width: 1014px;" %)AT+NWKSKEY
417 417  |(% style="width:455px" %)**Command Example**|(% style="width:215px" %)**Function**|(% style="width:343px" %)**Response**
418 418  |(% style="width:455px" %)AT+NWKSKEY=?|(% style="width:215px" %)Get the Network Session Key.|(% style="width:343px" %)00 4f 19 25 52 ce 97 09 d7 fa 84 71 db 51 02 92(((
... ... @@ -430,7 +430,7 @@
430 430  **AT Command: AT+CFM**
431 431  {{/info}}
432 432  
433 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
346 +(% style="background-color:#ffffcc; color:green; width:710.222px" %)
434 434  |=(% colspan="3" style="width: 707px;" %)AT+CFM
435 435  |(% style="width:155px" %)**Command Example**|(% style="width:205px" %)**Function**|(% style="width:346px" %)**Response**
436 436  |(% style="width:155px" %)AT+CFM=?|(% style="width:205px" %)Get the confirmation mode|(% style="width:346px" %)0(((
... ... @@ -456,7 +456,7 @@
456 456  **AT Command: AT+CFS**
457 457  {{/info}}
458 458  
459 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
372 +(% style="background-color:#ffffcc; color:green; width:534.222px" %)
460 460  |=(% colspan="3" style="width: 531px;" %)AT+CFS
461 461  |(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:178px" %)**Response**
462 462  |(% style="width:156px" %)AT+CFS=?|(% style="width:193px" %)Get confirmation status|(% style="width:178px" %)0(((
... ... @@ -471,7 +471,7 @@
471 471  **AT Command: AT+JOIN**
472 472  {{/info}}
473 473  
474 -(% border="1" style="background-color:#ffffcc; color:green; width:647.222px" %)
387 +(% style="background-color:#ffffcc; color:green; width:647.222px" %)
475 475  |=(% colspan="3" style="width: 644px;" %)AT+JOIN
476 476  |(% style="width:163px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:334px" %)**Response**
477 477  |(% style="width:163px" %)AT+JOIN ?|(% style="width:147px" %)Get imformation.|(% style="width:334px" %)AT+JOIN: Join network(((
... ... @@ -488,7 +488,7 @@
488 488  **AT Command: AT+NJM**
489 489  {{/info}}
490 490  
491 -(% border="1" style="background-color:#ffffcc; color:green; width:753.222px" %)
404 +(% style="background-color:#ffffcc; color:green; width:753.222px" %)
492 492  |=(% colspan="3" style="width: 750px;" %)AT+NJM
493 493  |(% style="width:162px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:361px" %)**Response**
494 494  |(% style="width:162px" %)AT+NJM=?|(% style="width:227px" %)Get the Network Join Mode|(% style="width:361px" %)1(((
... ... @@ -516,7 +516,7 @@
516 516  **AT Command: AT+NJS**
517 517  {{/info}}
518 518  
519 -(% border="1" style="background-color:#ffffcc; color:green; width:498.222px" %)
432 +(% style="background-color:#ffffcc; color:green; width:498.222px" %)
520 520  |=(% colspan="3" style="width: 495px;" %)AT+NJS
521 521  |(% style="width:169px" %)**Command Example**|(% style="width:164px" %)**Function**|(% style="width:161px" %)**Response**
522 522  |(% style="width:169px" %)AT+NJS=?|(% style="width:164px" %)Get the join status.|(% style="width:161px" %)0(((
... ... @@ -531,7 +531,7 @@
531 531  **AT Command: AT+RECV**
532 532  {{/info}}
533 533  
534 -(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
447 +(% style="background-color:#ffffcc; color:green; width:587.222px" %)
535 535  |=(% colspan="3" style="width: 584px;" %)AT+RECV
536 536  |(% style="width:161px" %)**Command Example**|(% style="width:272px" %)**Function**|(% style="width:150px" %)**Response**
537 537  |(% style="width:161px" %)AT+RECV=?|(% style="width:272px" %)print last received data in raw format.|(% style="width:150px" %)0:(((
... ... @@ -546,7 +546,7 @@
546 546  **AT Command: AT+RECVB**
547 547  {{/info}}
548 548  
549 -(% border="1" style="background-color:#ffffcc; color:green; width:793.222px" %)
462 +(% style="background-color:#ffffcc; color:green; width:793.222px" %)
550 550  |=(% colspan="3" style="width: 790px;" %)AT+RECVB
551 551  |(% style="width:173px" %)**Command Example**|(% style="width:497px" %)**Function**|(% style="width:120px" %)**Response**
552 552  |(% style="width:173px" %)AT+RECVB=?|(% style="width:497px" %)print last received data in binary format (with hexadecimal values).|(% style="width:120px" %)2: 0010(((
... ... @@ -561,7 +561,7 @@
561 561  **AT Command: AT+SEND**
562 562  {{/info}}
563 563  
564 -(% border="1" style="background-color:#ffffcc; color:green; width:991.222px" %)
477 +(% style="background-color:#ffffcc; color:green; width:991.222px" %)
565 565  |=(% colspan="3" style="width: 988px;" %)AT+SEND
566 566  |(% style="width:201px" %)**Command Example**|(% style="width:340px" %)**Function**|(% style="width:446px" %)**Response**
567 567  |(% style="width:201px" %)AT+SEND=12:hello world|(% style="width:340px" %)Send text data along with the application port.|(% style="width:446px" %)OK(((
... ... @@ -580,7 +580,7 @@
580 580  **AT Command: AT+SENDB**
581 581  {{/info}}
582 582  
583 -(% border="1" style="background-color:#ffffcc; color:green; width:1120.22px" %)
496 +(% style="background-color:#ffffcc; color:green; width:1120.22px" %)
584 584  |=(% colspan="3" style="width: 1117px;" %)AT+SENDB
585 585  |(% style="width:257px" %)**Command Example**|(% style="width:406px" %)**Function**|(% style="width:453px" %)**Response**
586 586  |(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)OK
... ... @@ -600,7 +600,7 @@
600 600  **AT Command: AT+ADR**
601 601  {{/info}}
602 602  
603 -(% border="1" style="background-color:#ffffcc; color:green; width:683.222px" %)
516 +(% style="background-color:#ffffcc; color:green; width:683.222px" %)
604 604  |=(% colspan="3" style="width: 680px;" %)AT+ADR
605 605  |(% style="width:162px" %)**Command Example**|(% style="width:266px" %)**Function**|(% style="width:250px" %)**Response**
606 606  |(% style="width:162px" %)AT+ADR=?|(% style="width:266px" %)Get the Adaptive Data Rate setting.|(% style="width:250px" %)1(((
... ... @@ -629,7 +629,7 @@
629 629  **AT Command:AT+CLASS**
630 630  {{/info}}
631 631  
632 -(% border="1" style="background-color:#ffffcc; color:green; width:507.222px" %)
545 +(% style="background-color:#ffffcc; color:green; width:507.222px" %)
633 633  |=(% colspan="3" style="width: 504px;" %)AT+CLASS
634 634  |(% style="width:163px" %)**Command Example**|(% style="width:166px" %)**Function**|(% style="width:175px" %)**Response**
635 635  |(% style="width:163px" %)AT+CLASS=?|(% style="width:166px" %)Get the Device Class.|(% style="width:175px" %)A(((
... ... @@ -647,7 +647,7 @@
647 647  **AT Command:AT+DCS**
648 648  {{/info}}
649 649  
650 -(% border="1" style="background-color:#ffffcc; color:green; width:515.222px" %)
563 +(% style="background-color:#ffffcc; color:green; width:515.222px" %)
651 651  |=(% colspan="3" style="width: 512px;" %)AT+DCS
652 652  |(% style="width:165px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:107px" %)**Response**
653 653  |(% style="width:165px" %)AT+DCS=?|(% style="width:239px" %)Get the ETSI Duty Cycle setting.|(% style="width:107px" %)1(((
... ... @@ -665,7 +665,7 @@
665 665  **AT Command: AT+DR**
666 666  {{/info}}
667 667  
668 -(% border="1" style="background-color:#ffffcc; color:green; width:466.222px" %)
581 +(% style="background-color:#ffffcc; color:green; width:466.222px" %)
669 669  |=(% colspan="3" style="width: 463px;" %)AT+DR
670 670  |(% style="width:156px" %)**Command Example**|(% style="width:167px" %)**Function**|(% style="width:140px" %)**Response**
671 671  |(% style="width:156px" %)AT+DR=?|(% style="width:167px" %)Get the Data Rate.|(% style="width:140px" %)5(((
... ... @@ -693,7 +693,7 @@
693 693  **AT Command:AT+FCD**
694 694  {{/info}}
695 695  
696 -(% border="1" style="background-color:#ffffcc; color:green; width:693.222px" %)
609 +(% style="background-color:#ffffcc; color:green; width:693.222px" %)
697 697  |=(% colspan="3" style="width: 690px;" %)AT+FCD
698 698  |(% style="width:162px" %)**Command Example**|(% style="width:258px" %)**Function**|(% style="width:269px" %)**Response**
699 699  |(% style="width:162px" %)AT+FCD=?|(% style="width:258px" %)Get the Frame Counter Downlink.|(% style="width:269px" %)0(((
... ... @@ -713,7 +713,7 @@
713 713  **AT Command:AT+FCU**
714 714  {{/info}}
715 715  
716 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
629 +(% style="background-color:#ffffcc; color:green; width:534.222px" %)
717 717  |=(% colspan="3" style="width: 531px;" %)AT+FCU
718 718  |(% style="width:177px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:113px" %)**Response**
719 719  |(% style="width:177px" %)AT+FCU=?|(% style="width:239px" %)Get the Frame Counter Uplink.|(% style="width:113px" %)0(((
... ... @@ -731,7 +731,7 @@
731 731  **AT Command:AT+JN1DL**
732 732  {{/info}}
733 733  
734 -(% border="1" style="background-color:#ffffcc; color:green; width:537.222px" %)
647 +(% style="background-color:#ffffcc; color:green; width:537.222px" %)
735 735  |=(% colspan="3" style="width: 534px;" %)AT+JN1DL
736 736  |(% style="width:164px" %)**Command Example**|(% style="width:229px" %)**Function**|(% style="width:140px" %)**Response**
737 737  |(% style="width:164px" %)AT+JN1DL=?|(% style="width:229px" %)Get the Join Accept Delay.|(% style="width:140px" %)5000(((
... ... @@ -749,7 +749,7 @@
749 749  **AT Command:AT+JN2DL**
750 750  {{/info}}
751 751  
752 -(% border="1" style="background-color:#ffffcc; color:green; width:538.222px" %)
665 +(% style="background-color:#ffffcc; color:green; width:538.222px" %)
753 753  |=(% colspan="3" style="width: 535px;" %)AT+JN2DL
754 754  |(% style="width:160px" %)**Command Example**|(% style="width:228px" %)**Function**|(% style="width:146px" %)**Response**
755 755  |(% style="width:160px" %)AT+JN2DL=?|(% style="width:228px" %)Get the Join Accept Delay.|(% style="width:146px" %)6000(((
... ... @@ -767,7 +767,7 @@
767 767  **AT Command:AT+PNM**
768 768  {{/info}}
769 769  
770 -(% border="1" style="background-color:#ffffcc; color:green; width:667.222px" %)
683 +(% style="background-color:#ffffcc; color:green; width:667.222px" %)
771 771  |=(% colspan="3" style="width: 664px;" %)AT+PNM
772 772  |(% style="width:166px" %)**Command Example**|(% style="width:225px" %)**Function**|(% style="width:272px" %)**Response**
773 773  |(% style="width:166px" %)AT+PNM=?|(% style="width:225px" %)Get the public network mode.|(% style="width:272px" %)1(((
... ... @@ -787,7 +787,7 @@
787 787  **AT Command:AT+RX1DL**
788 788  {{/info}}
789 789  
790 -(% border="1" style="background-color:#ffffcc; color:green; width:408.222px" %)
703 +(% style="background-color:#ffffcc; color:green; width:408.222px" %)
791 791  |=(% colspan="3" style="width: 405px;" %)AT+RX1DL
792 792  |(% style="width:155px" %)**Command Example**|(% style="width:128px" %)**Function**|(% style="width:122px" %)**Response**
793 793  |(% style="width:155px" %)AT+RX1DL=?|(% style="width:128px" %)Get the delay.|(% style="width:122px" %)1000(((
... ... @@ -797,21 +797,18 @@
797 797  
798 798  )))
799 799  
800 -== 7.11 Receive Delay2 ==
713 +== 7.11Receive Delay2 ==
801 801  
802 802  Feature: Get or Set the delay between the end of the Tx and the Rx Window 2 in ms
803 803  
804 -{{info}}
805 -**AT Command:AT+RX2DL**
806 -{{/info}}
717 +AT Command:AT+RX2DL
807 807  
808 -(% border="1" style="background-color:#ffffcc; color:green; width:481.222px" %)
809 -|=(% colspan="3" style="width: 478px;" %)AT+RX2DL
810 -|(% style="width:175px" %)**Command Example**|(% style="width:152px" %)**Function**|(% style="width:150px" %)**Response**
811 -|(% style="width:175px" %)AT+RX2DL=?|(% style="width:152px" %)Get the delay.|(% style="width:150px" %)2000(((
719 +|=(% colspan="3" %)AT+RX2DL
720 +|**Command Example**|**Function**|**Response**
721 +|AT+RX2DL=?|Get the delay.|2000(((
812 812  OK
813 813  )))
814 -|(% style="width:175px" %)AT+RX2DL=2500|(% style="width:152px" %)Set the delay.|(% style="width:150px" %)OK(((
724 +|AT+RX2DL=2500|Set the delay.|OK(((
815 815  
816 816  )))
817 817  
... ... @@ -819,17 +819,14 @@
819 819  
820 820  Feature: Get or Set the Rx2 window data rate (0-7 corresponding to DR_X)
821 821  
822 -{{info}}
823 -**AT Command:AT+RX2DR**
824 -{{/info}}
732 +AT Command:AT+RX2DR
825 825  
826 -(% border="1" style="background-color:#ffffcc; color:green; width:525.222px" %)
827 -|=(% colspan="3" style="width: 522px;" %)AT+RX2DR
828 -|(% style="width:160px" %)**Command Example**|(% style="width:232px" %)**Function**|(% style="width:130px" %)**Response**
829 -|(% style="width:160px" %)AT+RX2DR=?|(% style="width:232px" %)Get the Rx2 window data rate.|(% style="width:130px" %)2(((
734 +|=(% colspan="3" %)AT+RX2DR
735 +|**Command Example**|**Function**|**Response**
736 +|AT+RX2DR=?|Get the Rx2 window data rate.|2(((
830 830  OK
831 831  )))
832 -|(% style="width:160px" %)AT+RX2DR=6|(% style="width:232px" %)Set the Rx2 window data rate.|(% style="width:130px" %)OK(((
739 +|AT+RX2DR=6|Set the Rx2 window data rate.|OK(((
833 833  
834 834  )))
835 835  
... ... @@ -837,17 +837,14 @@
837 837  
838 838  Feature: Get or Set the Rx2 window frequency
839 839  
840 -{{info}}
841 -**AT Command:AT+RX2FQ**
842 -{{/info}}
747 +AT Command:AT+RX2FQ
843 843  
844 -(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
845 -|=(% colspan="3" style="width: 584px;" %)AT+RX2FQ
846 -|(% style="width:183px" %)**Command Example**|(% style="width:240px" %)**Function**|(% style="width:160px" %)**Response**
847 -|(% style="width:183px" %)AT+RX2FQ=?|(% style="width:240px" %)Get the Rx2 window frequency.|(% style="width:160px" %)434665000(((
749 +|=(% colspan="3" %)AT+RX2FQ
750 +|**Command Example**|**Function**|**Response**
751 +|AT+RX2FQ=?|Get the Rx2 window frequency.|434665000(((
848 848  OK
849 849  )))
850 -|(% style="width:183px" %)AT+RX2FQ=434665000|(% style="width:240px" %)Set the Rx2 window frequency.|(% style="width:160px" %)OK(((
754 +|AT+RX2FQ=434665000|Set the Rx2 window frequency.|OK(((
851 851  
852 852  )))
853 853  
... ... @@ -855,17 +855,14 @@
855 855  
856 856  Feature: Get or Set the Transmit Power(0-5, MAX:0, MIN:5, according to LoRaWAN Spec, or 40=10dB, 41 = 11dB, …, 50 = 20dB which is out of LoRaWAN spec. )
857 857  
858 -{{info}}
859 -**AT Command:AT+TXP**
860 -{{/info}}
762 +AT Command:AT+TXP
861 861  
862 -(% border="1" style="background-color:#ffffcc; color:green; width:465.222px" %)
863 -|=(% colspan="3" style="width: 462px;" %)AT+TXP
864 -|(% style="width:161px" %)**Command Example**|(% style="width:189px" %)**Function**|(% style="width:112px" %)**Response**
865 -|(% style="width:161px" %)AT+TXP=?|(% style="width:189px" %)Get the Transmit Power.|(% style="width:112px" %)0(((
764 +|=(% colspan="3" %)AT+TXP
765 +|**Command Example**|**Function**|**Response**
766 +|AT+TXP=?|Get the Transmit Power.|0(((
866 866  OK
867 867  )))
868 -|(% style="width:161px" %)AT+TXP=1|(% style="width:189px" %)Set the Transmit Power.|(% style="width:112px" %)OK(((
769 +|AT+TXP=1|Set the Transmit Power.|OK(((
869 869  
870 870  )))
871 871  
... ... @@ -873,21 +873,18 @@
873 873  
874 874  If the downlink payload=22000100, it means setting the TXP to 0.
875 875  
876 -* **Example 1**: Downlink Payload: **22000102** ~/~/ Set AT+TXP=2.
877 -* **Example 2**: Downlink Payload: **220000FF** ~/~/ Set AT+TXP=0.
777 +* Example 1: Downlink Payload: 22000102 ~/~/ Set AT+TXP=2.
778 +* Example 2: Downlink Payload: 220000FF ~/~/ Set AT+TXP=0.
878 878  
879 879  == 7.15 RSSI of the Last Received Packet ==
880 880  
881 881  Feature: Get or Set the Rx2 window frequency
882 882  
883 -{{info}}
884 -**AT Command:AT+RSSI**
885 -{{/info}}
784 +AT Command:AT+RSSI
886 886  
887 -(% border="1" style="background-color:#ffffcc; color:green; width:557.222px" %)
888 -|=(% colspan="3" style="width: 554px;" %)AT+RSSI
889 -|(% style="width:164px" %)**Command Example**|(% style="width:289px" %)**Function**|(% style="width:100px" %)**Response**
890 -|(% style="width:164px" %)AT+RSSI=?|(% style="width:289px" %)Get the RSSI of the last received packet.|(% style="width:100px" %)0(((
786 +|=(% colspan="3" %)AT+RSSI
787 +|**Command Example**|**Function**|**Response**
788 +|AT+RSSI=?|Get the RSSI of the last received packet.|0(((
891 891  OK
892 892  )))
893 893  
... ... @@ -895,14 +895,11 @@
895 895  
896 896  Feature: Get the SNR of the last received packet
897 897  
898 -{{info}}
899 -**AT Command:AT+SNR**
900 -{{/info}}
796 +AT Command:AT+SNR
901 901  
902 -(% border="1" style="background-color:#ffffcc; color:green; width:571.222px" %)
903 -|=(% colspan="3" style="width: 568px;" %)AT+SNR
904 -|(% style="width:164px" %)**Command Example**|(% style="width:290px" %)**Function**|(% style="width:113px" %)**Response**
905 -|(% style="width:164px" %)AT+SNR=?|(% style="width:290px" %)Get the RSSI of the last received packet.|(% style="width:113px" %)0(((
798 +|=(% colspan="3" %)AT+SNR
799 +|**Command Example**|**Function**|**Response**
800 +|AT+SNR=?|Get the RSSI of the last received packet.|0(((
906 906  OK
907 907  )))
908 908  
... ... @@ -910,144 +910,114 @@
910 910  
911 911  Feature: Get or set the application port.
912 912  
913 -{{info}}
914 -**AT Command: AT+PORT**
915 -{{/info}}
808 +AT Command: AT+PORT
916 916  
917 -(% border="1" style="background-color:#ffffcc; color:green; width:500.222px" %)
918 -|=(% colspan="3" style="width: 497px;" %)AT+PORT
919 -|(% style="width:157px" %)**Command Example**|(% style="width:204px" %)**Function**|(% style="width:135px" %)**Response**
920 -|(% style="width:157px" %)AT+PORT=?|(% style="width:204px" %)Get the application port|(% style="width:135px" %)21(((
810 +|=(% colspan="3" %)AT+PORT
811 +|**Command Example**|**Function**|**Response**
812 +|AT+PORT=?|Get the application port|21(((
921 921  OK
922 922  )))
923 -|(% style="width:157px" %)AT+PORT=21|(% style="width:204px" %)Set the application port|(% style="width:135px" %)OK
815 +|AT+PORT=21|Set the application port|OK
924 924  
925 -{{info}}
926 -**Downlink Command: 0x23**
927 -{{/info}}
817 +Downlink Command: 0x23
928 928  
929 929  Format: Command Code (0x23) followed by 1 bytes port value.
930 930  
931 931  If the downlink payload=2301, it means set the application port to 1, while type code is 23.
932 932  
933 -* **Example 1**: Downlink Payload: **2301** ~/~/ set the application port to 1
934 -* **Example 2**: Downlink Payload:** 2305** ~/~/ set the application port to 5
823 +* Example 1: Downlink Payload: 2301 ~/~/ set the application port to 1
824 +* Example 2: Downlink Payload: 2305 ~/~/ set the application port to 5
935 935  
936 936  == 7.18 Single Channel Mode ==
937 937  
938 938  Feature:Get or Set Frequency (Unit: Hz) for Single Channel Mode.
939 939  
940 -{{info}}
941 -**AT Command: AT+CHS**
942 -{{/info}}
830 +AT Command: AT+CHS
943 943  
944 -(% border="1" style="background-color:#ffffcc; color:green; width:603.222px" %)
945 -|=(% colspan="3" style="width: 600px;" %)AT+CHS
946 -|(% style="width:182px" %)**Command Example**|(% style="width:295px" %)**Function**|(% style="width:122px" %)**Response**
947 -|(% style="width:182px" %)AT+CHS=?|(% style="width:295px" %)Get Frequency for Single Channel Mode|(% style="width:122px" %)0(((
832 +|=(% colspan="3" %)AT+CHS
833 +|**Command Example**|**Function**|**Response**
834 +|AT+CHS=?|Get Frequency for Single Channel Mode|0(((
948 948  OK
949 949  )))
950 -|(% style="width:182px" %)AT+CHS=868100000|(% style="width:295px" %)Set Frequency for Single Channel Mode|(% style="width:122px" %)OK
837 +|AT+CHS=868100000|Set Frequency for Single Channel Mode|OK
951 951  
952 952  == 7.19 Eight Channel Mode ==
953 953  
954 954  Feature: Get or Set eight channels mode,Only for US915,AU915,CN470.
955 955  
956 -{{info}}
957 -**AT Command: AT+CHE**
958 -{{/info}}
843 +AT Command: AT+CHE
959 959  
960 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
961 -|=(% colspan="3" style="width: 707px;" %)AT+CHE
962 -|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
963 -|(% style="width:160px" %)AT+CHE=?|(% style="width:198px" %)Get eight channels mode|(% style="width:349px" %)1(((
845 +|=(% colspan="3" %)AT+CHE
846 +|**Command Example**|**Function**|**Response**
847 +|AT+CHE=?|Get eight channels mode|1(((
964 964  902.3 902.5 902.7 902.9 903.1 903.3 903.5 903.7
965 965  
966 966  OK
967 967  )))
968 -|(% style="width:160px" %)AT+CHE=1|(% style="width:198px" %)Set eight channels mode|(% style="width:349px" %)OK
852 +|AT+CHE=1|Set eight channels mode|OK
969 969  
970 -{{info}}
971 -**Downlink Command: 0x24**
972 -{{/info}}
854 +Downlink Command: 0x24
973 973  
974 974  Format: Command Code (0x24) followed by 1 bytes channel value.
975 975  
976 976  If the downlink payload=2401, it means set channel mode to 1, while type code is 24.
977 977  
978 -* **Example 1**: Downlink Payload: 2401 ~/~/ set channel mode to 1
979 -* **Example 2**: Downlink Payload: 2405 ~/~/ set channel mode to 5
860 +* Example 1: Downlink Payload: 2401 ~/~/ set channel mode to 1
861 +* Example 2: Downlink Payload: 2405 ~/~/ set channel mode to 5
980 980  
981 981  == 7.20 Get or Set RXwindows1 timeout ==
982 982  
983 983  Feature:Get or Set the number of symbols to detect and timeout from RXwindow1(0 to 255).
984 984  
985 -{{info}}
986 -**AT Command: AT+RX1WTO**
987 -{{/info}}
867 +AT Command: AT+RX1WTO
988 988  
989 -(% border="1" style="background-color:#ffffcc; color:green; width:460.222px" %)
990 -|=(% colspan="3" style="width: 457px;" %)AT+ RX1WTO
991 -|(% style="width:163px" %)**Command Example**|(% style="width:201px" %)**Function**|(% style="width:93px" %)**Response**
992 -|(% style="width:163px" %)AT+RX1WTO=?|(% style="width:201px" %)Get RXwindows1 timeout|(% style="width:93px" %)14(((
869 +|=(% colspan="3" %)AT+ RX1WTO
870 +|**Command Example**|**Function**|**Response**
871 +|AT+RX1WTO=?|Get RXwindows1 timeout|14(((
993 993  OK
994 994  )))
995 -|(% style="width:163px" %)AT+RX1WTO=60|(% style="width:201px" %)Set RXwindows1 timeout|(% style="width:93px" %)OK
874 +|AT+RX1WTO=60|Set RXwindows1 timeout|OK
996 996  
997 -(((
998 -**AT+RX1TWO** is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
999 -)))
876 +AT+RX1TWO is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
1000 1000  
1001 -[[image:image-20220526162535-1.png]]
878 +[[~[~[image:https://wiki.dragino.com/images/thumb/5/51/RX1WTO.JPG/600px-RX1WTO.JPG~|~|alt="RX1WTO.JPG" height="239" width="600"~]~]>>url:https://wiki.dragino.com/index.php/File:RX1WTO.JPG]]
1002 1002  
1003 -(((
1004 1004  Increasing thisvalue is equal to extending the time that the receiving window is opened, butthe corresponding power consumption will also increase. Properly increasingthis value can increase the success rate of the downlink.
1005 1005  
1006 -
1007 -)))
1008 -
1009 1009  == 7.21 Get or Set RXwindows2 timeout ==
1010 1010  
1011 1011  Feature:Get or Set the number of symbols to detect and timeout from RXwindow2(0 to 255).
1012 1012  
1013 -{{info}}
1014 -**AT Command: AT+RX2WTO**
1015 -{{/info}}
886 +AT Command: AT+RX2WTO
1016 1016  
1017 -(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
1018 -|=(% colspan="3" style="width: 494px;" %)AT+ RX2WTO
1019 -|(% style="width:190px" %)**Command Example**|(% style="width:199px" %)**Function**|(% style="width:104px" %)**Response**
1020 -|(% style="width:190px" %)AT+RX2WTO=?|(% style="width:199px" %)Get RXwindows2 timeout|(% style="width:104px" %)7(((
888 +|=(% colspan="3" %)AT+ RX2WTO
889 +|**Command Example**|**Function**|**Response**
890 +|AT+RX2WTO=?|Get RXwindows2 timeout|7(((
1021 1021  OK
1022 1022  )))
1023 -|(% style="width:190px" %)AT+RX2WTO=20|(% style="width:199px" %)Set RXwindows2 timeout|(% style="width:104px" %)OK
893 +|AT+RX2WTO=20|Set RXwindows2 timeout|OK
1024 1024  
1025 1025  == 7.22 Setting up uplinkdwelltime (as923, au915) ==
1026 1026  
1027 1027  Feature: Get or Set uplinkdwelltime
1028 1028  
1029 -{{info}}
1030 -**AT Command: AT+DWELLT**
1031 -{{/info}}
899 +AT Command: AT+DWELLT
1032 1032  
1033 -(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
1034 -|=(% colspan="3" style="width: 494px;" %)AT+DWELLT
1035 -|(% style="width:183px" %)**Command Example**|(% style="width:179px" %)**Function**|(% style="width:131px" %)**Response**
1036 -|(% style="width:183px" %)AT+DWELLT=?|(% style="width:179px" %)Get uplinkdwelltime|(% style="width:131px" %)1(((
901 +|=(% colspan="3" %)AT+DWELLT
902 +|**Command Example**|**Function**|**Response**
903 +|AT+DWELLT=?|Get uplinkdwelltime|1(((
1037 1037  OK
1038 1038  )))
1039 -|(% style="width:183px" %)AT+DWELLT=0|(% style="width:179px" %)Set uplinkdwelltime|(% style="width:131px" %)OK
906 +|AT+DWELLT=0|Set uplinkdwelltime|OK
1040 1040  
1041 -{{info}}
1042 -**Downlink Command: 0x25**
1043 -{{/info}}
908 +Downlink Command: 0x25
1044 1044  
1045 1045  Format: Command Code (0x25) followed by 1 bytes state value.
1046 1046  
1047 1047  If the downlink payload=2501, it means set uplinkdwelltime to 1, while type code is 25.
1048 1048  
1049 -* **Example 1**: Downlink Payload: **2501** ~/~/ set uplinkdwelltime to 1
1050 -* **Example 2**: Downlink Payload: **2500** ~/~/ set uplinkdwelltime to 0
914 +* Example 1: Downlink Payload: 2501 ~/~/ set uplinkdwelltime to 1
915 +* Example 2: Downlink Payload: 2500 ~/~/ set uplinkdwelltime to 0
1051 1051  
1052 1052  == 7.23 Set Packet Receiving Response Level ==
1053 1053  
... ... @@ -1055,11 +1055,11 @@
1055 1055  
1056 1056  RPL value:
1057 1057  
1058 -* **AT+RPL=0:** Device won't immediately reply any downlink commands from platform.
1059 -* **AT+RPL=1:** Device will immediately reply message to Unconfirmed Data Down. Payload is 0x00.
1060 -* **AT+RPL=2:** Device will immediately reply message to Confirmed Data Down. Payload is 0x00 and requied response header for this command.
1061 -* **AT+RPL=3:** Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command.
1062 -* **AT+RPL=4: **Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands.
923 +* AT+RPL=0: Device won't immediately reply any downlink commands from platform.
924 +* AT+RPL=1: Device will immediately reply message to Unconfirmed Data Down. Payload is 0x00.
925 +* AT+RPL=2: Device will immediately reply message to Confirmed Data Down. Payload is 0x00 and requied response header for this command.
926 +* AT+RPL=3: Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command.
927 +* AT+RPL=4: Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands.
1063 1063  
1064 1064  Case Analyes:
1065 1065  
... ... @@ -1067,44 +1067,37 @@
1067 1067  * For Class C devices used in ChirpStack, need to set AT+RPL=4 because Chirpstack require immedietely reply message to MAC Command.
1068 1068  * For Class C devices used in TTI, need to set AT+RPL=4 because TTI require immediately reply message to Confirmed Data Down & MAC Command.
1069 1069  
1070 -{{info}}
1071 -**AT Command: AT+RPL**
1072 -{{/info}}
935 +AT Command: AT+RPL
1073 1073  
1074 -(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1075 -|=(% colspan="3" style="width: 533px;" %)AT+RPL
1076 -|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1077 -|(% style="width:160px" %)AT+RPL=?|(% style="width:263px" %)Get packet receiving response level|(% style="width:109px" %)1(((
937 +|=(% colspan="3" %)AT+RPL
938 +|**Command Example**|**Function**|**Response**
939 +|AT+RPL=?|Get packet receiving response level|1(((
1078 1078  OK
1079 1079  )))
1080 -|(% style="width:160px" %)AT+RPL=0|(% style="width:263px" %)Set packet receiving response level|(% style="width:109px" %)OK
942 +|AT+RPL=0|Set packet receiving response level|OK
1081 1081  
1082 -{{info}}
1083 -**Downlink Command: 0x21**
1084 -{{/info}}
944 +Downlink Command: 0x21
1085 1085  
1086 1086  Format: Command Code (0x21) followed by 1 bytes level value.
1087 1087  
1088 1088  If the downlink payload=2101, it means set packet receiving response level to 1, while type code is 21.
1089 1089  
1090 -* **Example 1**: Downlink Payload: **2101** ~/~/ set packet receiving response level to 1
1091 -* **Example 2**: Downlink Payload: **2102** ~/~/ set packet receiving response level to 2
950 +* Example 1: Downlink Payload: 2101 ~/~/ set packet receiving response level to 1
951 +* Example 2: Downlink Payload: 2102 ~/~/ set packet receiving response level to 2
1092 1092  
1093 1093  = 8. AT Commands Combination =
1094 1094  
1095 1095  == 8.1 Set a fix RX2DR for downlink window ==
1096 1096  
1097 -* **AT+ADR=0 **~-~-> Disable ADR first
1098 -* **AT+RX2DR=xxxx** ~-~-> Set xxxx to your wanted DataRate
957 +* AT+ADR=0 ~-~-> Disable ADR first
958 +* AT+RX2DR=xxxx ~-~-> Set xxxx to your wanted DataRate
1099 1099  
1100 1100  == 8.2 Use Downlink Command to set a fix uplink DR ==
1101 1101  
1102 -{{info}}
1103 -**Downlink Command: 0x22000500**
1104 -{{/info}}
962 +Downlink Command: 0x22000500
1105 1105  
1106 1106  Same as:
1107 1107  
1108 -* AT+ADR=0  [[Reference>>||anchor="H7.1AdaptiveDataRate"]]
1109 -* AT+DR=5  [[Reference>>||anchor="H7.4DataRate"]]
1110 -* AT+TXP=0  [[Reference>>||anchor="H7.14TransmitPower"]]
966 +* AT+ADR=0 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Adaptive_Data_Rate]]
967 +* AT+DR=5 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Data_Rate]]
968 +* AT+TXP=0 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Transmit_Power]]
image-20220511120050-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -136.3 KB
Content
image-20220526162535-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -149.4 KB
Content
Copyright ©2010-2022 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0