Changes for page End Device AT Commands and Downlink Command
Last modified by kai on 2024/09/06 10:00
Summary
-
Page properties (1 modified, 0 added, 0 removed)
-
Attachments (0 modified, 0 added, 2 removed)
Details
- Page properties
-
- Content
-
... ... @@ -1,9 +1,8 @@ 1 - **Contents：**1 +Contens 2 2 3 3 {{toc/}} 4 4 5 5 6 - 7 7 = 1. Introduction = 8 8 9 9 Dragino LoRaWAN End Node support two types of AT Commands and Downlink Commands: ... ... @@ -11,95 +11,35 @@ 11 11 * **Common Commands:** They should be available for each sensor, such as: change uplink interval, reset device. 12 12 * **Sensor Related Commands:** Only for special sensor, such as control relay, poll RS485 device. 13 13 14 -((( 15 15 **This page shows the common commands since Dragino LoRaWAN stack DR-LWS-005. Make sure the end node support stack higher than DR-LWS-005 before checking this page.** 16 16 17 -))) 18 18 19 19 = 2. How to use AT Commands or Downlink command = 20 20 21 21 * For AT Command , See Devices User Manual for Device. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]] 22 22 * For LoRaWAN Downlink: The gateway transfer downlink command in HEX format. This page shows the HEX format downlink code for each command. but some servers use base64 as downlink code. Below are reference for how to use downlink command: 23 -** Use HEX format to send a downlink: [[TTN v3>>Notes 24 -** Use Base64 format to send a downlink: [[Chirpstack>>Notes 25 -** See use note for more serves [[Servers Note>>doc :Main.WebHome]](IoT LoRaWANServer)20 +** Use HEX format to send a downlink: [[TTN v3>>url:https://wiki.dragino.com/index.php/Notes_for_TTN#Send_Downlink_message]] 21 +** Use Base64 format to send a downlink: [[Chirpstack>>url:https://wiki.dragino.com/index.php/Notes_for_ChirpStack#Downlink]]. 22 +** See use note for more serves [[Servers Note>>url:https://wiki.dragino.com/index.php/Main_Page#Use_Note_for_Server]] 26 26 27 - 28 - 29 29 = 3. Support End Node and firmware version = 30 30 31 -(% border="1" style="background-color:#ffffcc; color:green; width:966px" %) 32 -|=(% colspan="3" style="width: 963px;" %)((( 33 -Dragino STM32 base hardware Firmware / LoRaWAN stack list 34 -))) 35 -|(% style="width:187px" %)((( 36 -**Model** 37 -)))|(% style="width:330px" %)((( 38 -**Description** 39 -)))|(% style="width:445px" %)((( 40 -**Firmware Version <~-~-> Stack Version** 41 -))) 42 -|(% style="width:187px" %)((( 43 -[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]], 44 -)))|(% style="width:330px" %)((( 45 -Open Source Generic LoRaWAN Sensor Node 46 -)))|(% style="width:445px" %)((( 47 -((( 48 -LSN50 v1.6.0 <~-~-> DR-LWS-003; 49 -))) 50 50 51 -((( 52 -((( 27 +(% border="1" style="background-color:#ffffcc; color:green; width:995.222px" %) 28 +|=(% colspan="3" style="width: 992px;" %) Dragino STM32 base hardware Firmware / LoRaWAN stack list 29 +|(% style="width:187px" %)**Model**|(% style="width:349px" %)**Description**|(% style="width:453px" %)**Firmware Version <~-~-> Stack Version** 30 +|(% style="width:187px" %)[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],|(% style="width:349px" %)Open Source Generic LoRaWAN Sensor Node|(% style="width:453px" %)LSN50 v1.6.0 <~-~-> DR-LWS-003;((( 53 53 LSN50 v1.7.0 <~-~-> DR-LWS-005; ~-~-> Support since this version 54 54 ))) 55 -))) 56 -))) 57 -|(% style="width:187px" %)((( 58 -[[LGT92>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/142-lgt-92.html]], 59 -)))|(% style="width:330px" %)((( 60 -LoRaWAN GPS Tracker 61 -)))|(% style="width:445px" %)((( 62 -((( 63 -LGT92 v1.6.3 <~-~-> DR-LWS-003; 64 -))) 65 - 66 -((( 67 -((( 33 +|(% style="width:187px" %)[[LGT92>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/142-lgt-92.html]],|(% style="width:349px" %)LoRaWAN GPS Tracker|(% style="width:453px" %)LGT92 v1.6.3 <~-~-> DR-LWS-003;((( 68 68 LGT92 v1.6.4 <~-~-> DR-LWS-005;~-~-> Support since this version 69 69 ))) 70 -))) 71 -))) 72 -|(% style="width:187px" %)((( 73 -[[LBT1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/165-lbt1.html]], 74 -)))|(% style="width:330px" %)((( 75 -LoRaWAN BLE Indoor Tracker 76 -)))|(% style="width:445px" %)((( 77 -LBT1 v1.0 <~-~-> DR-LWS-005; 78 -))) 79 -|(% style="width:187px" %)((( 80 -[[RS485-LN>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/154-rs485-ln.html]], 81 -)))|(% style="width:330px" %)((( 82 -LoRaWAN RS485 Modbus Converter 83 -)))|(% style="width:445px" %)((( 84 -RS485-LN v1.3 <~-~-> DR-LWS-005; 85 -))) 86 -|(% style="width:187px" %)((( 87 -[[LHT65>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/151-lht65.html]], 88 -)))|(% style="width:330px" %)((( 89 -LoRaWAN Temperature & Humidity Sensor 90 -)))|(% style="width:445px" %)((( 91 -((( 92 -LHT65 v1.7 <~-~-> DR-LWS-003; 93 -))) 94 - 95 -((( 96 -((( 36 +|(% style="width:187px" %)[[LBT1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/165-lbt1.html]],|(% style="width:349px" %)LoRaWAN BLE Indoor Tracker|(% style="width:453px" %)LBT1 v1.0 <~-~-> DR-LWS-005; 37 +|(% style="width:187px" %)[[RS485-LN>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/154-rs485-ln.html]],|(% style="width:349px" %)LoRaWAN RS485 Modbus Converter|(% style="width:453px" %)RS485-LN v1.3 <~-~-> DR-LWS-005; 38 +|(% style="width:187px" %)[[LHT65>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/151-lht65.html]],|(% style="width:349px" %)LoRaWAN Temperature & Humidity Sensor|(% style="width:453px" %)LHT65 v1.7 <~-~-> DR-LWS-003;((( 97 97 LHT65 v1.8.0 <~-~-> DR-LWS-005;~-~-> Support since this version 98 98 ))) 99 -))) 100 -))) 101 101 102 - 103 103 = 4. System Management Commands = 104 104 105 105 == 4.1 Change Uplink Interval == ... ... @@ -108,11 +108,11 @@ 108 108 109 109 (% class="box infomessage" %) 110 110 ((( 111 - **AT Command: AT+TDC**50 +AT Command: AT+TDC 112 112 ))) 113 113 114 114 (% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %) 115 -|=(% colspan="3" style="width: 724px;" %)AT+TDC 54 +|=(% colspan="3" style="width: 724px;" %) AT+TDC 116 116 |(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response** 117 117 |(% style="width:165px" %)AT+TDC=?|(% style="width:227px" %)Show current transmit Interval|(% style="width:329px" %)30000((( 118 118 OK ... ... @@ -123,33 +123,27 @@ 123 123 Set transmit interval to 60000ms = 60 seconds 124 124 ))) 125 125 126 -{{info}} 127 127 **Downlink Command: 0x01** 128 -{{/info}} 129 129 130 -((( 131 131 Format: Command Code (0x01) followed by 3 bytes time value. 132 -))) 133 133 134 -((( 135 135 If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01. 136 -))) 137 137 138 138 * **Example 1**: Downlink Payload:** 0100001E** ~/~/ Set Transmit Interval (TDC) = 30 seconds 139 139 * **Example 2**: Downlink Payload:** 0100003C** ~/~/ Set Transmit Interval (TDC) = 60 seconds 140 140 141 - 142 142 == 4.2 Reboot End Node == 143 143 144 144 Feature: Reboot End Node to perform a new OTAA or ABP Join. 145 145 146 146 {{info}} 147 - **AT Command: ATZ**79 +AT Command: ATZ 148 148 {{/info}} 149 149 150 150 (% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %) 151 -|=(% colspan="3" %)ATZ: Trig a reset of the MCU 83 +|=(% colspan="3" %) ATZ: Trig a reset of the MCU 152 152 |**Command Example**|**Function**|**Response** 85 +~)~)~) 153 153 |ATZ|Reset MCU|((( 154 154 Device reset and show booting info 155 155 ... ... @@ -164,56 +164,35 @@ 164 164 <followed by the Tx and Rx information> 165 165 ))) 166 166 167 -{{info}} 168 -**Downlink Command: 0x04** 169 -{{/info}} 100 +Downlink Command: 0x04 170 170 171 -((( 172 172 Format: Command Code (0x04) followed by FF. 173 -))) 174 174 175 -((( 176 -If the downlink payload=**04FF**, the end node will reboot. 104 +If the downlink payload=04FF, the end node will reboot. 177 177 178 - 179 -))) 180 - 181 181 == 4.3 Reset to factory Default == 182 182 183 183 Feature: Reset the parameters to Factory Default, factory default value depends on the firmware settings, the OTAA and ABP keys will reserve after this command. 184 184 185 -{{info}} 186 -**AT Command: AT+FDR** 187 -{{/info}} 110 +AT Command: AT+FDR 188 188 189 -(% border="1" style="background-color:#ffffcc; color:green; width:831.222px" %) 190 -|=(% colspan="3" style="width: 828px;" %)Reset to factory default 191 -|(% style="width:181px" %)**Command Example**|(% style="width:181px" %)**Function**|(% style="width:465px" %)**Response** 192 -|(% style="width:181px" %)AT+FDR|(% style="width:181px" %)Reset to factory default|(% style="width:465px" %)((( 193 -Device reset to factory default parameters and show booting info 112 +|=(% colspan="3" %)Reset to factory default 113 +|**Command Example**|**Function**|**Response** 114 +|AT+FDR|Reset to factory default|Device reset to factory default parameters and show booting info 194 194 195 -LSN50 Device/LoRa ST Module 196 - 116 +{{{LSN50 Device/LoRa ST Module 197 197 Image Version: XX 198 - 199 199 Frequency Band: XX 200 - 201 201 DevEui= XX XX XX XX XX XX XX XX 202 - 203 203 Please set the parameters or reset Device to apply change 204 - )))121 +}}} 205 205 206 -{{info}} 207 -**Downlink Command: 0x04** 208 -{{/info}} 209 209 210 -((( 124 +Downlink Command: 0x04 125 + 211 211 Format: Command Code (0x04) followed by FE. 212 -))) 213 213 214 -((( 215 -If the downlink payload=**04FE**, Reset Parameters to Factory Default, Keys Reserve. 216 -))) 128 +If the downlink payload=04FE, Reset Parameters to Factory Default, Keys Reserve. 217 217 218 218 219 219 == 4.4 Show Firmware Version == ... ... @@ -220,42 +220,30 @@ 220 220 221 221 Feature: Show firmware version. No downlink command yet. 222 222 223 -{{info}} 224 -**AT Command: AT+VER** 225 -{{/info}} 135 +AT Command: AT+VER 226 226 227 -(% border="1" style="background-color:#ffffcc; color:green; width:586px" %) 228 -|=(% colspan="3" style="width: 583px;" %)AT+VER: Image Version and Frequency Band 229 -|(% style="width:170px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:113px" %)**Response** 230 -|(% style="width:170px" %)AT+VER=?|(% style="width:300px" %)Show Image version and Frequency Band|(% style="width:113px" %)((( 231 -1.3 EU868 137 +|=(% colspan="3" %)AT+VER: Image Version and Frequency Band 138 +|**Command Example**|**Function**|**Response** 139 +|AT+VER=?|Show Image version and Frequency Band| 232 232 141 +{{{1.3 EU868 233 233 OK 234 - )))143 +}}} 235 235 236 -{{info}} 237 -**Downlink Command: 0x26 (Valid in 006 stack)** 238 -{{/info}} 239 239 240 -((( 146 +Downlink Command: 0x26 (Valid in 006 stack) 147 + 241 241 Downlink Format: 0x26 242 -))) 243 243 244 -((( 245 245 Device will reply with firmware version info, device info. frequency band info. detail please check device user manual. Total 5 bytes Example: If device is of firmware version 1.1.0 Upload: xx ~-~- yy ~-~- zz ~-~- 110 total 5 bytes 246 -))) 247 247 248 -((( 249 -**xx: Software Type:** 250 -))) 152 +xx: Software Type: 251 251 252 252 * 0x00 01: LGT92 Version 253 253 * 0x00 02: LBT1 254 254 * 0x00 03: LSE01/LDDS75/LDDS20/LSPH01/LLMS01/LSNPK01 255 255 256 -((( 257 -**yy: Frequency Band:** 258 -))) 158 +yy: Frequency Band: 259 259 260 260 * 0x01: EU868 261 261 * 0x02: US915 ... ... @@ -268,9 +268,7 @@ 268 268 * 0x09: AS923-2 269 269 * 0xa0: AS923-3 270 270 271 -((( 272 -**zz: Subband** 273 -))) 171 +zz: Subband 274 274 275 275 firmware version: v1.1.0 ~-~-> 110 276 276 ... ... @@ -279,26 +279,19 @@ 279 279 280 280 Feature: Show All configure. No downlink command yet. 281 281 282 -{{info}} 283 -**AT Command: AT+CFG** 284 -{{/info}} 180 +AT Command: AT+CFG 285 285 286 -(% border="1" style="background-color:#ffffcc; color:green; width:599.222px" %) 287 -|=(% colspan="3" style="width: 596px;" %)AT+CFG: Print all configurations 288 -|(% style="width:160px" %)**Command Example**|(% style="width:154px" %)**Function**|(% style="width:280px" %)**Response** 289 -|(% style="width:160px" %)AT+CFG|(% style="width:154px" %)Show all configures|(% style="width:280px" %)((( 290 -AT+DEUI = XX XX XX XX XX XX XX XX 182 +|=(% colspan="3" %)AT+CFG: Print all configurations 183 +|**Command Example**|**Function**|**Response** 184 +|AT+CFG|Show all configures| 291 291 186 +{{{AT+DEUI = XX XX XX XX XX XX XX XX 292 292 AT+DADDR=XXXXXXXX 293 - 294 294 ………. 295 - 296 296 AT+RX2WTO=X 297 - 298 298 AT+CHS=868100000 299 - 300 300 OK 301 - )))192 +}}} 302 302 303 303 304 304 = 5. Keys, IDs and EUIs management = ... ... @@ -307,92 +307,70 @@ 307 307 308 308 Feature: Get or Set the Application EUI. 309 309 310 -{{info}} 311 -**AT Command: AT+APPEUI** 312 -{{/info}} 201 +AT Command: AT+APPEUI 313 313 314 -(% border="1" style="background-color:#ffffcc; color:green; width:686.222px" %) 315 -|=(% colspan="3" style="width: 683px;" %)AT+APPEUI 316 -|(% style="width:305px" %)**Command Example**|(% style="width:186px" %)**Function**|(% style="width:191px" %)**Response** 317 -|(% style="width:305px" %)AT+APPEUI=?|(% style="width:186px" %)Get the Application EUI|(% style="width:191px" %)00 b3 d5 00 00 00 00 00((( 203 +|=(% colspan="3" %)AT+APPEUI 204 +|**Command Example**|**Function**|**Response** 205 +|AT+APPEUI=?|Get the Application EUI|00 b3 d5 00 00 00 00 00((( 318 318 OK 319 319 ))) 320 -| (% style="width:305px" %)AT+APPEUI=00 b3 d5 7e f0 00 4d 34|(% style="width:186px" %)Set the Application EUI|(% style="width:191px" %)OK208 +|AT+APPEUI=00 b3 d5 7e f0 00 4d 34|Set the Application EUI|OK 321 321 322 - 323 323 == 5.2 Application Key == 324 324 325 325 Feature: Get or Set the Application Key. 326 326 327 -{{info}} 328 -**AT Command: AT+APPKEY** 329 -{{/info}} 214 +AT Command: AT+APPKEY 330 330 331 -(% border="1" style="background-color:#ffffcc; color:green; width:976.222px" %) 332 -|=(% colspan="3" style="width: 973px;" %)AT+APPKEY 333 -|(% style="width:441px" %)**Command Example**|(% style="width:180px" %)**Function**|(% style="width:350px" %)**Response** 334 -|(% style="width:441px" %)AT+APPKEY=?|(% style="width:180px" %)Get the Application Key|(% style="width:350px" %)00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35((( 216 +|=(% colspan="3" %)AT+APPKEY 217 +|**Command Example**|**Function**|**Response** 218 +|AT+APPKEY=?|Get the Application Key|00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35((( 335 335 OK 336 336 ))) 337 -| (% style="width:441px" %)AT+APPKEY=00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35|(% style="width:180px" %)Set the Application Key|(% style="width:350px" %)OK221 +|AT+APPKEY=00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35|Set the Application Key.|OK 338 338 339 - 340 - 341 341 == 5.3 Application Session Key == 342 342 343 343 Feature: Get or Set the Application Session Key. 344 344 345 -{{info}} 346 -**AT Command: AT+APPSKEY** 347 -{{/info}} 227 +AT Command: AT+APPSKEY 348 348 349 -(% border="1" style="background-color:#ffffcc; color:green; width:1040.22px" %) 350 -|=(% colspan="3" style="width: 1037px;" %)AT+APPSKEY 351 -|(% style="width:451px" %)**Command Example**|(% style="width:231px" %)**Function**|(% style="width:354px" %)**Response** 352 -|(% style="width:451px" %)AT+APPSKEY=?|(% style="width:231px" %)Get the Application Session Key|(% style="width:354px" %)00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2((( 229 +|=(% colspan="3" %)AT+APPSKEY 230 +|**Command Example**|**Function**|**Response** 231 +|AT+APPSKEY=?|Get the Application Session Key|00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2((( 353 353 OK 354 354 ))) 355 -| (% style="width:451px" %)AT+APPSKEY=00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2|(% style="width:231px" %)Set the Application Session Key|(% style="width:354px" %)(While Error in format, return AT_PARAM_ERROR)(((234 +|AT+APPSKEY=00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2|Set the Application Session Key.|(While Error in format, return AT_PARAM_ERROR)((( 356 356 OK 357 357 ))) 358 358 359 - 360 - 361 361 == 5.4 Device Address == 362 362 363 363 Feature: Get or Set the Device Address. 364 364 365 -{{info}} 366 -**AT Command: AT+DADDR** 367 -{{/info}} 242 +AT Command: AT+DADDR 368 368 369 -(% border="1" style="background-color:#ffffcc; color:green; width:795.222px" %) 370 -|=(% colspan="3" style="width: 792px;" %)AT+DADDR 371 -|(% style="width:192px" %)**Command Example**|(% style="width:241px" %)**Function**|(% style="width:359px" %)**Response** 372 -|(% style="width:192px" %)AT+DADDR=?|(% style="width:241px" %)Get the Application Session Key.|(% style="width:359px" %)(While Error in format, return AT_PARAM_ERROR)((( 244 +|=(% colspan="3" %)AT+DADDR 245 +|**Command Example**|**Function**|**Response** 246 +|AT+DADDR=?|Get the Application Session Key.|(While Error in format, return AT_PARAM_ERROR)((( 373 373 A8 40 41 FF 374 374 375 375 OK 376 376 ))) 377 -| (% style="width:192px" %)AT+DADDR=A8 40 41 FF|(% style="width:241px" %)Set the Application Session Key.|(% style="width:359px" %)OK251 +|AT+DADDR=A8 40 41 FF|Set the Application Session Key.|OK 378 378 379 - 380 - 381 381 == 5.5 Device EUI == 382 382 383 383 Feature: Get or Set the Device EUI. 384 384 385 -{{info}} 386 -**AT Command: AT+DEUI** 387 -{{/info}} 257 +AT Command: AT+DEUI 388 388 389 -(% border="1" style="background-color:#ffffcc; color:green; width:1035.22px" %) 390 -|=(% colspan="3" style="width: 1032px;" %)AT+DEUI 391 -|(% style="width:250px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:634px" %)**Response** 392 -|(% style="width:250px" %)AT+DEUI=?|(% style="width:147px" %)Get the Device EUI.|(% style="width:634px" %)00 44 34 22 33 45 55 55((( 259 +|=(% colspan="3" %)AT+DEUI 260 +|**Command Example**|**Function**|**Response** 261 +|AT+DEUI=?|Get the Device EUI.|00 44 34 22 33 45 55 55((( 393 393 OK 394 394 ))) 395 -| (% style="width:250px" %)AT+DEUI=A8 40 41 FF FF 12 34 56|(% style="width:147px" %)Set the Device EUI.|(% style="width:634px" %)(System will write new value to Device EUI,While Error in format, return AT_PARAM_ERROR)(((264 +|AT+DEUI=A8 40 41 FF FF 12 34 56|Set the Device EUI.|(System will write new value to Device EUI,While Error in format, return AT_PARAM_ERROR)((( 396 396 OK 397 397 ))) 398 398 ... ... @@ -400,33 +400,27 @@ 400 400 401 401 Feature: Get or Set the Network ID.(You can enter this command change only after successful network connection) 402 402 403 -{{info}} 404 -**AT Command: AT+NWKID** 405 -{{/info}} 272 +AT Command: AT+NWKID 406 406 407 -(% border="1" style="background-color:#ffffcc; color:green; width:448.222px" %) 408 -|=(% colspan="3" style="width: 445px;" %)AT+NWKID 409 -|(% style="width:191px" %)**Command Example**|(% style="width:153px" %)**Function**|(% style="width:101px" %)**Response** 410 -|(% style="width:191px" %)AT+NWKID=?|(% style="width:153px" %)Get the Network ID.|(% style="width:101px" %)a8 40 41 ff((( 274 +|=(% colspan="3" %)AT+NWKID 275 +|**Command Example**|**Function**|**Response** 276 +|AT+NWKID=?|Get the Network ID.|a8 40 41 ff((( 411 411 OK 412 412 ))) 413 -| (% style="width:191px" %)AT+NWKID=A8 40 41 FF|(% style="width:153px" %)Set the Network ID.|(% style="width:101px" %)OK279 +|AT+NWKID=A8 40 41 FF|Set the Network ID.|OK 414 414 415 415 == 5.7 Network Session Key == 416 416 417 417 Feature: Get or Set the Network Session Key 418 418 419 -{{info}} 420 -**AT Command: AT+NWKSKEY** 421 -{{/info}} 285 +AT Command: AT+NWKSKEY 422 422 423 -(% border="1" style="background-color:#ffffcc; color:green; width:1017.22px" %) 424 -|=(% colspan="3" style="width: 1014px;" %)AT+NWKSKEY 425 -|(% style="width:455px" %)**Command Example**|(% style="width:215px" %)**Function**|(% style="width:343px" %)**Response** 426 -|(% style="width:455px" %)AT+NWKSKEY=?|(% style="width:215px" %)Get the Network Session Key.|(% style="width:343px" %)00 4f 19 25 52 ce 97 09 d7 fa 84 71 db 51 02 92((( 287 +|=(% colspan="3" %)AT+NWKSKEY 288 +|**Command Example**|**Function**|**Response** 289 +|AT+NWKSKEY=?|Get the Network Session Key.|00 4f 19 25 52 ce 97 09 d7 fa 84 71 db 51 02 92((( 427 427 OK 428 428 ))) 429 -| (% style="width:455px" %)AT+NWKSKEY=A8 40 41 FF FF 12 34 56 00 01 02 04 05 06 06 07|(% style="width:215px" %)Set the Network Session Key.|(% style="width:343px" %)OK292 +|AT+NWKSKEY=A8 40 41 FF FF 12 34 56 00 01 02 04 05 06 06 07|Set the Network Session Key.|OK 430 430 431 431 = 6. Joining and sending date on LoRaWAN network = 432 432 ... ... @@ -434,18 +434,15 @@ 434 434 435 435 Feature: Get or Set the confirmation mode (0-1). 436 436 437 -{{info}} 438 -**AT Command: AT+CFM** 439 -{{/info}} 300 +AT Command: AT+CFM 440 440 441 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %) 442 -|=(% colspan="3" style="width: 707px;" %)AT+CFM 443 -|(% style="width:155px" %)**Command Example**|(% style="width:205px" %)**Function**|(% style="width:346px" %)**Response** 444 -|(% style="width:155px" %)AT+CFM=?|(% style="width:205px" %)Get the confirmation mode|(% style="width:346px" %)0((( 302 +|=(% colspan="3" %)AT+CFM 303 +|**Command Example**|**Function**|**Response** 304 +|AT+CFM=?|Get the confirmation mode|0((( 445 445 OK 446 446 ))) 447 -| (% style="width:155px" %)AT+CFM=1|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)OK448 -| (% style="width:155px" %)AT+CFM=2|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)While Error in format, return AT_PARAM_ERROR307 +|AT+CFM=1|Set the confirmation mode|OK 308 +|AT+CFM=2|Set the confirmation mode|While Error in format, return AT_PARAM_ERROR 449 449 450 450 Downlink Command: 0x05 451 451 ... ... @@ -460,14 +460,11 @@ 460 460 461 461 Feature: Get confirmation status of the last AT+SEND (0-1). 462 462 463 -{{info}} 464 -**AT Command: AT+CFS** 465 -{{/info}} 323 +AT Command: AT+CFS 466 466 467 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %) 468 -|=(% colspan="3" style="width: 531px;" %)AT+CFS 469 -|(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:178px" %)**Response** 470 -|(% style="width:156px" %)AT+CFS=?|(% style="width:193px" %)Get confirmation status|(% style="width:178px" %)0((( 325 +|=(% colspan="3" %)AT+CFS 326 +|**Command Example**|**Function**|**Response** 327 +|AT+CFS=?|Get confirmation status|0((( 471 471 OK 472 472 ))) 473 473 ... ... @@ -475,14 +475,11 @@ 475 475 476 476 Feature: Join network. 477 477 478 -{{info}} 479 -**AT Command: AT+JOIN** 480 -{{/info}} 335 +AT Command: AT+JOIN 481 481 482 -(% border="1" style="background-color:#ffffcc; color:green; width:647.222px" %) 483 -|=(% colspan="3" style="width: 644px;" %)AT+JOIN 484 -|(% style="width:163px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:334px" %)**Response** 485 -|(% style="width:163px" %)AT+JOIN ?|(% style="width:147px" %)Get imformation.|(% style="width:334px" %)AT+JOIN: Join network((( 337 +|=(% colspan="3" %)AT+JOIN 338 +|**Command Example**|**Function**|**Response** 339 +|AT+JOIN ?|Get imformation.|AT+JOIN: Join network((( 486 486 OK 487 487 488 488 While Error in format, return AT_BUSY_ERROR ... ... @@ -492,42 +492,34 @@ 492 492 493 493 Feature: Get or Set the Network Join Mode. (0: ABP, 1: OTAA). 494 494 495 -{{info}} 496 -**AT Command: AT+NJM** 497 -{{/info}} 349 +AT Command: AT+NJM 498 498 499 -(% border="1" style="background-color:#ffffcc; color:green; width:753.222px" %) 500 -|=(% colspan="3" style="width: 750px;" %)AT+NJM 501 -|(% style="width:162px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:361px" %)**Response** 502 -|(% style="width:162px" %)AT+NJM=?|(% style="width:227px" %)Get the Network Join Mode|(% style="width:361px" %)1((( 351 +|=(% colspan="3" %)AT+NJM 352 +|**Command Example**|**Function**|**Response** 353 +|AT+NJM=?|Get the Network Join Mode|1((( 503 503 OK 504 504 ))) 505 -| (% style="width:162px" %)AT+NJM=0|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)OK506 -| (% style="width:162px" %)AT+NJM=2|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)While Error in format, return AT_PARAM_ERROR356 +|AT+NJM=0|Set the Network Join Mode|OK 357 +|AT+NJM=2|Set the Network Join Mode|While Error in format, return AT_PARAM_ERROR 507 507 508 -{{info}} 509 -**Downlink Command: 0x20** 510 -{{/info}} 359 +Downlink Command: 0x20 511 511 512 512 Format: Command Code (0x20) followed by 1 bytes mode value. 513 513 514 514 If the downlink payload=2000, it means set the Network Join Mode, while type code is 20. 515 515 516 -* **Example 1:**Downlink Payload:**2000**~/~/ Set AT+NJM=O517 -* **Example 2:**Downlink Payload:**2001**~/~/ Set AT+NJM=1365 +* Example 1: Downlink Payload: 2000 ~/~/ Set AT+NJM=O 366 +* Example 2: Downlink Payload: 2001 ~/~/ Set AT+NJM=1 518 518 519 519 == 6.5 LoRa® Network Join Status == 520 520 521 521 Feature: LoRa® Network Join Status. 522 522 523 -{{info}} 524 -**AT Command: AT+NJS** 525 -{{/info}} 372 +AT Command: AT+NJS 526 526 527 -(% border="1" style="background-color:#ffffcc; color:green; width:498.222px" %) 528 -|=(% colspan="3" style="width: 495px;" %)AT+NJS 529 -|(% style="width:169px" %)**Command Example**|(% style="width:164px" %)**Function**|(% style="width:161px" %)**Response** 530 -|(% style="width:169px" %)AT+NJS=?|(% style="width:164px" %)Get the join status.|(% style="width:161px" %)0((( 374 +|=(% colspan="3" %)AT+NJS 375 +|**Command Example**|**Function**|**Response** 376 +|AT+NJS=?|Get the join status.|0((( 531 531 OK 532 532 ))) 533 533 ... ... @@ -535,14 +535,11 @@ 535 535 536 536 Feature: Print Last Received Data in Raw Format<port:data>. 537 537 538 -{{info}} 539 -**AT Command: AT+RECV** 540 -{{/info}} 384 +AT Command: AT+RECV 541 541 542 -(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %) 543 -|=(% colspan="3" style="width: 584px;" %)AT+RECV 544 -|(% style="width:161px" %)**Command Example**|(% style="width:272px" %)**Function**|(% style="width:150px" %)**Response** 545 -|(% style="width:161px" %)AT+RECV=?|(% style="width:272px" %)print last received data in raw format.|(% style="width:150px" %)0:((( 386 +|=(% colspan="3" %)AT+RECV 387 +|**Command Example**|**Function**|**Response** 388 +|AT+RECV=?|print last received data in raw format.|0:((( 546 546 OK 547 547 ))) 548 548 ... ... @@ -550,14 +550,11 @@ 550 550 551 551 Feature: Print Last Received Data in Binary Format<port:data>. 552 552 553 -{{info}} 554 -**AT Command: AT+RECVB** 555 -{{/info}} 396 +AT Command: AT+RECVB 556 556 557 -(% border="1" style="background-color:#ffffcc; color:green; width:793.222px" %) 558 -|=(% colspan="3" style="width: 790px;" %)AT+RECVB 559 -|(% style="width:173px" %)**Command Example**|(% style="width:497px" %)**Function**|(% style="width:120px" %)**Response** 560 -|(% style="width:173px" %)AT+RECVB=?|(% style="width:497px" %)print last received data in binary format (with hexadecimal values).|(% style="width:120px" %)2: 0010((( 398 +|=(% colspan="3" %)AT+RECVB 399 +|**Command Example**|**Function**|**Response** 400 +|AT+RECVB=?|print last received data in binary format (with hexadecimal values).|2: 0010((( 561 561 OK 562 562 ))) 563 563 ... ... @@ -565,14 +565,11 @@ 565 565 566 566 Feature: Send Text Data<port:data>. 567 567 568 -{{info}} 569 -**AT Command: AT+SEND** 570 -{{/info}} 408 +AT Command: AT+SEND 571 571 572 -(% border="1" style="background-color:#ffffcc; color:green; width:991.222px" %) 573 -|=(% colspan="3" style="width: 988px;" %)AT+SEND 574 -|(% style="width:201px" %)**Command Example**|(% style="width:340px" %)**Function**|(% style="width:446px" %)**Response** 575 -|(% style="width:201px" %)AT+SEND=12:hello world|(% style="width:340px" %)Send text data along with the application port.|(% style="width:446px" %)OK((( 410 +|=(% colspan="3" %)AT+SEND 411 +|**Command Example**|**Function**|**Response** 412 +|AT+SEND=12:hello world|Send text data along with the application port.|OK((( 576 576 While Error in format, return 577 577 578 578 AT_BUSY_ERROR/AT_BUSY_ERROR/AT_NO_NETWORK_JOINED ... ... @@ -584,15 +584,12 @@ 584 584 585 585 Feature: Send hexadecimal data along with the application port. 586 586 587 -{{info}} 588 -**AT Command: AT+SENDB** 589 -{{/info}} 424 +AT Command: AT+SENDB 590 590 591 -(% border="1" style="background-color:#ffffcc; color:green; width:1120.22px" %) 592 -|=(% colspan="3" style="width: 1117px;" %)AT+SENDB 593 -|(% style="width:257px" %)**Command Example**|(% style="width:406px" %)**Function**|(% style="width:453px" %)**Response** 594 -|(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)OK 595 -|(% style="width:257px" %)AT+SENDB=abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)While Error in format, return((( 426 +|=(% colspan="3" %)AT+SENDB 427 +|**Command Example**|**Function**|**Response** 428 +|AT+SENDB=12:abcdef0123456789|Send hexadecimal data along with the application port.|OK 429 +|AT+SENDB=abcdef0123456789|Send hexadecimal data along with the application port.|While Error in format, return((( 596 596 AT_PARAM_ERROR AT_BUSY_ERROR/AT_NO_NETWORK_JOINED 597 597 598 598 ... ... @@ -604,46 +604,39 @@ 604 604 605 605 Feature: Get or Set the Adaptive Data Rate setting. (0: off, 1: on). 606 606 607 -{{info}} 608 -**AT Command: AT+ADR** 609 -{{/info}} 610 610 611 -(% border="1" style="background-color:#ffffcc; color:green; width:683.222px" %) 612 -|=(% colspan="3" style="width: 680px;" %)AT+ADR 613 -|(% style="width:162px" %)**Command Example**|(% style="width:266px" %)**Function**|(% style="width:250px" %)**Response** 614 -|(% style="width:162px" %)AT+ADR=?|(% style="width:266px" %)Get the Adaptive Data Rate setting.|(% style="width:250px" %)1((( 442 +AT Command: AT+ADR 443 + 444 +|=(% colspan="3" %)AT+ADR 445 +|**Command Example**|**Function**|**Response** 446 +|AT+ADR=?|Get the Adaptive Data Rate setting.|1((( 615 615 OK 616 616 ))) 617 -| (% style="width:162px" %)AT+ADR=0|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:250px" %)OK618 -| (% style="width:162px" %)AT+ADR=2|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:250px" %)While Error in format, return(((449 +|AT+ADR=0|Set the Adaptive Data Rate setting.|OK 450 +|AT+ADR=2|Set the Adaptive Data Rate setting.|While Error in format, return((( 619 619 AT_PARAM_ERROR 620 620 ))) 621 621 622 -{{info}} 623 -**Downlink Command: 0x22** 624 -{{/info}} 454 +Downlink Command: 0x22 625 625 626 626 627 627 If the downlink payload=2201, it means setting the adaptive data rate to 1, while type code is 22. 628 628 629 -* **Example 1**: Downlink Payload:**2201**~/~/ Set AT+ADR=1.630 -* **Example 2**: Downlink Payload:**2200FFFF**~/~/ Set AT+ADR=0.459 +* Example 1: Downlink Payload: 2201 ~/~/ Set AT+ADR=1. 460 +* Example 2: Downlink Payload: 2200FFFF ~/~/ Set AT+ADR=0. 631 631 632 632 == 7.2 LoRa® Class == 633 633 634 634 Feature: Get or Set the Device Class(Currently only support class A, class C). 635 635 636 -{{info}} 637 -**AT Command:AT+CLASS** 638 -{{/info}} 466 +AT Command:AT+CLASS 639 639 640 -(% border="1" style="background-color:#ffffcc; color:green; width:507.222px" %) 641 -|=(% colspan="3" style="width: 504px;" %)AT+CLASS 642 -|(% style="width:163px" %)**Command Example**|(% style="width:166px" %)**Function**|(% style="width:175px" %)**Response** 643 -|(% style="width:163px" %)AT+CLASS=?|(% style="width:166px" %)Get the Device Class.|(% style="width:175px" %)A((( 468 +|=(% colspan="3" %)AT+CLASS 469 +|**Command Example**|**Function**|**Response** 470 +|AT+CLASS=?|Get the Device Class.|A((( 644 644 OK 645 645 ))) 646 -| (% style="width:163px" %)AT+CLASS=C|(% style="width:166px" %)Set the Device Class.|(% style="width:175px" %)OK(((473 +|AT+CLASS=C|Set the Device Class.|OK((( 647 647 648 648 ))) 649 649 ... ... @@ -651,17 +651,14 @@ 651 651 652 652 Feature: Get or Set the ETSI Duty Cycle setting - 0=disable, 1=enable - Only for testing. 653 653 654 -{{info}} 655 -**AT Command:AT+DCS** 656 -{{/info}} 481 +AT Command:AT+DCS 657 657 658 -(% border="1" style="background-color:#ffffcc; color:green; width:515.222px" %) 659 -|=(% colspan="3" style="width: 512px;" %)AT+DCS 660 -|(% style="width:165px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:107px" %)**Response** 661 -|(% style="width:165px" %)AT+DCS=?|(% style="width:239px" %)Get the ETSI Duty Cycle setting.|(% style="width:107px" %)1((( 483 +|=(% colspan="3" %)AT+DCS 484 +|**Command Example**|**Function**|**Response** 485 +|AT+DCS=?|Get the ETSI Duty Cycle setting.|1((( 662 662 OK 663 663 ))) 664 -| (% style="width:165px" %)AT+DCS=1|(% style="width:239px" %)Set the ETSI Duty Cycle setting.|(% style="width:107px" %)OK(((488 +|AT+DCS=1|Set the ETSI Duty Cycle setting.|OK((( 665 665 666 666 ))) 667 667 ... ... @@ -669,45 +669,37 @@ 669 669 670 670 Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) . Note: while set Data Rate, please use set Adptive Data Rate, ADR=0 first. otherwise device will response to server's ADR command and change the DR to the setting from server 671 671 672 -{{info}} 673 -**AT Command: AT+DR** 674 -{{/info}} 496 +AT Command: AT+DR 675 675 676 -(% border="1" style="background-color:#ffffcc; color:green; width:466.222px" %) 677 -|=(% colspan="3" style="width: 463px;" %)AT+DR 678 -|(% style="width:156px" %)**Command Example**|(% style="width:167px" %)**Function**|(% style="width:140px" %)**Response** 679 -|(% style="width:156px" %)AT+DR=?|(% style="width:167px" %)Get the Data Rate.|(% style="width:140px" %)5((( 498 +|=(% colspan="3" %)AT+DR 499 +|**Command Example**|**Function**|**Response** 500 +|AT+DR=?|Get the Data Rate.|5((( 680 680 OK 681 681 ))) 682 -| (% style="width:156px" %)AT+DR=2|(% style="width:167px" %)Set the Data Rate.|(% style="width:140px" %)OK(((503 +|AT+DR=2|Set the Data Rate.|OK((( 683 683 684 684 ))) 685 685 686 -{{info}} 687 -**Downlink Command: 0x2200aaFF** 688 -{{/info}} 507 +Downlink Command: 0x2200aaFF 689 689 690 690 691 691 If the downlink payload=220001FF, it means setting the data rate to 1, while type code is 22 00 aa FF. 692 692 693 -* **Example 1**: Downlink Payload:**220001FF**~/~/ Set AT+DR=1.694 -* **Example 2**: Downlink Payload:**220000FF**~/~/ Set AT+DR=0.512 +* Example 1: Downlink Payload: 220001FF ~/~/ Set AT+DR=1. 513 +* Example 2: Downlink Payload: 220000FF ~/~/ Set AT+DR=0. 695 695 696 696 == 7.5 Frame Counter Downlink == 697 697 698 698 Feature: Get or Set the Frame Counter Downlink. 699 699 700 -{{info}} 701 -**AT Command:AT+FCD** 702 -{{/info}} 519 +AT Command:AT+FCD 703 703 704 -(% border="1" style="background-color:#ffffcc; color:green; width:693.222px" %) 705 -|=(% colspan="3" style="width: 690px;" %)AT+FCD 706 -|(% style="width:162px" %)**Command Example**|(% style="width:258px" %)**Function**|(% style="width:269px" %)**Response** 707 -|(% style="width:162px" %)AT+FCD=?|(% style="width:258px" %)Get the Frame Counter Downlink.|(% style="width:269px" %)0((( 521 +|=(% colspan="3" %)AT+FCD 522 +|**Command Example**|**Function**|**Response** 523 +|AT+FCD=?|Get the Frame Counter Downlink.|0((( 708 708 OK 709 709 ))) 710 -| (% style="width:162px" %)AT+FCD=10|(% style="width:258px" %)Set the Frame Counter Downlink.|(% style="width:269px" %)(System will write new value to FCD)(((526 +|AT+FCD=10|Set the Frame Counter Downlink.|(System will write new value to FCD)((( 711 711 OK 712 712 713 713 ... ... @@ -717,17 +717,14 @@ 717 717 718 718 Feature: Get or Set the Frame Counter Uplink. 719 719 720 -{{info}} 721 -**AT Command:AT+FCU** 722 -{{/info}} 536 +AT Command:AT+FCU 723 723 724 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %) 725 -|=(% colspan="3" style="width: 531px;" %)AT+FCU 726 -|(% style="width:177px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:113px" %)**Response** 727 -|(% style="width:177px" %)AT+FCU=?|(% style="width:239px" %)Get the Frame Counter Uplink.|(% style="width:113px" %)0((( 538 +|=(% colspan="3" %)AT+FCU 539 +|**Command Example**|**Function**|**Response** 540 +|AT+FCU=?|Get the Frame Counter Uplink.|0((( 728 728 OK 729 729 ))) 730 -| (% style="width:177px" %)AT+FCU=10|(% style="width:239px" %)Set the Frame Counter Uplink.|(% style="width:113px" %)OK(((543 +|AT+FCU=10|Set the Frame Counter Uplink.|OK((( 731 731 732 732 ))) 733 733 ... ... @@ -735,17 +735,14 @@ 735 735 736 736 Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 1 in ms. 737 737 738 -{{info}} 739 -**AT Command:AT+JN1DL** 740 -{{/info}} 551 +AT Command:AT+JN1DL 741 741 742 -(% border="1" style="background-color:#ffffcc; color:green; width:537.222px" %) 743 -|=(% colspan="3" style="width: 534px;" %)AT+JN1DL 744 -|(% style="width:164px" %)**Command Example**|(% style="width:229px" %)**Function**|(% style="width:140px" %)**Response** 745 -|(% style="width:164px" %)AT+JN1DL=?|(% style="width:229px" %)Get the Join Accept Delay.|(% style="width:140px" %)5000((( 553 +|=(% colspan="3" %)AT+JN1DL 554 +|**Command Example**|**Function**|**Response** 555 +|AT+JN1DL=?|Get the Join Accept Delay.|5000((( 746 746 OK 747 747 ))) 748 -| (% style="width:164px" %)AT+JN1DL=10000|(% style="width:229px" %)Set the Join Accept Delay.|(% style="width:140px" %)OK(((558 +|AT+JN1DL=10000|Set the Join Accept Delay.|OK((( 749 749 750 750 ))) 751 751 ... ... @@ -753,17 +753,14 @@ 753 753 754 754 Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 2 in ms. 755 755 756 -{{info}} 757 -**AT Command:AT+JN2DL** 758 -{{/info}} 566 +AT Command:AT+JN2DL 759 759 760 -(% border="1" style="background-color:#ffffcc; color:green; width:538.222px" %) 761 -|=(% colspan="3" style="width: 535px;" %)AT+JN2DL 762 -|(% style="width:160px" %)**Command Example**|(% style="width:228px" %)**Function**|(% style="width:146px" %)**Response** 763 -|(% style="width:160px" %)AT+JN2DL=?|(% style="width:228px" %)Get the Join Accept Delay.|(% style="width:146px" %)6000((( 568 +|=(% colspan="3" %)AT+JN2DL 569 +|**Command Example**|**Function**|**Response** 570 +|AT+JN2DL=?|Get the Join Accept Delay.|6000((( 764 764 OK 765 765 ))) 766 -| (% style="width:160px" %)AT+JN2DL=20000|(% style="width:228px" %)Set the Join Accept Delay.|(% style="width:146px" %)OK(((573 +|AT+JN2DL=20000|Set the Join Accept Delay.|OK((( 767 767 768 768 ))) 769 769 ... ... @@ -771,17 +771,14 @@ 771 771 772 772 Feature: Get or Set the public network mode. (0: off, 1: on) 773 773 774 -{{info}} 775 -**AT Command:AT+PNM** 776 -{{/info}} 581 +AT Command:AT+PNM 777 777 778 -(% border="1" style="background-color:#ffffcc; color:green; width:667.222px" %) 779 -|=(% colspan="3" style="width: 664px;" %)AT+PNM 780 -|(% style="width:166px" %)**Command Example**|(% style="width:225px" %)**Function**|(% style="width:272px" %)**Response** 781 -|(% style="width:166px" %)AT+PNM=?|(% style="width:225px" %)Get the public network mode.|(% style="width:272px" %)1((( 583 +|=(% colspan="3" %)AT+PNM 584 +|**Command Example**|**Function**|**Response** 585 +|AT+PNM=?|Get the public network mode.|1((( 782 782 OK 783 783 ))) 784 -| (% style="width:166px" %)AT+PNM=1|(% style="width:225px" %)Set the public network mode.|(% style="width:272px" %)(System will write new value to PNM)(((588 +|AT+PNM=1|Set the public network mode.|(System will write new value to PNM)((( 785 785 OK 786 786 787 787 ... ... @@ -791,35 +791,29 @@ 791 791 792 792 Feature: Get or Set the delay between the end of the Tx and the Rx Window 1 in ms 793 793 794 -{{info}} 795 -**AT Command:AT+RX1DL** 796 -{{/info}} 598 +AT Command:AT+RX1DL 797 797 798 -(% border="1" style="background-color:#ffffcc; color:green; width:408.222px" %) 799 -|=(% colspan="3" style="width: 405px;" %)AT+RX1DL 800 -|(% style="width:155px" %)**Command Example**|(% style="width:128px" %)**Function**|(% style="width:122px" %)**Response** 801 -|(% style="width:155px" %)AT+RX1DL=?|(% style="width:128px" %)Get the delay.|(% style="width:122px" %)1000((( 600 +|=(% colspan="3" %)AT+RX1DL 601 +|**Command Example**|**Function**|**Response** 602 +|AT+RX1DL=?|Get the delay.|1000((( 802 802 OK 803 803 ))) 804 -| (% style="width:155px" %)AT+RX1DL=1500|(% style="width:128px" %)Set the delay.|(% style="width:122px" %)OK(((605 +|AT+RX1DL=1500|Set the delay.|OK((( 805 805 806 806 ))) 807 807 808 -== 7.11 609 +== 7.11Receive Delay2 == 809 809 810 810 Feature: Get or Set the delay between the end of the Tx and the Rx Window 2 in ms 811 811 812 -{{info}} 813 -**AT Command:AT+RX2DL** 814 -{{/info}} 613 +AT Command:AT+RX2DL 815 815 816 -(% border="1" style="background-color:#ffffcc; color:green; width:481.222px" %) 817 -|=(% colspan="3" style="width: 478px;" %)AT+RX2DL 818 -|(% style="width:175px" %)**Command Example**|(% style="width:152px" %)**Function**|(% style="width:150px" %)**Response** 819 -|(% style="width:175px" %)AT+RX2DL=?|(% style="width:152px" %)Get the delay.|(% style="width:150px" %)2000((( 615 +|=(% colspan="3" %)AT+RX2DL 616 +|**Command Example**|**Function**|**Response** 617 +|AT+RX2DL=?|Get the delay.|2000((( 820 820 OK 821 821 ))) 822 -| (% style="width:175px" %)AT+RX2DL=2500|(% style="width:152px" %)Set the delay.|(% style="width:150px" %)OK(((620 +|AT+RX2DL=2500|Set the delay.|OK((( 823 823 824 824 ))) 825 825 ... ... @@ -827,17 +827,14 @@ 827 827 828 828 Feature: Get or Set the Rx2 window data rate (0-7 corresponding to DR_X) 829 829 830 -{{info}} 831 -**AT Command:AT+RX2DR** 832 -{{/info}} 628 +AT Command:AT+RX2DR 833 833 834 -(% border="1" style="background-color:#ffffcc; color:green; width:525.222px" %) 835 -|=(% colspan="3" style="width: 522px;" %)AT+RX2DR 836 -|(% style="width:160px" %)**Command Example**|(% style="width:232px" %)**Function**|(% style="width:130px" %)**Response** 837 -|(% style="width:160px" %)AT+RX2DR=?|(% style="width:232px" %)Get the Rx2 window data rate.|(% style="width:130px" %)2((( 630 +|=(% colspan="3" %)AT+RX2DR 631 +|**Command Example**|**Function**|**Response** 632 +|AT+RX2DR=?|Get the Rx2 window data rate.|2((( 838 838 OK 839 839 ))) 840 -| (% style="width:160px" %)AT+RX2DR=6|(% style="width:232px" %)Set the Rx2 window data rate.|(% style="width:130px" %)OK(((635 +|AT+RX2DR=6|Set the Rx2 window data rate.|OK((( 841 841 842 842 ))) 843 843 ... ... @@ -845,17 +845,14 @@ 845 845 846 846 Feature: Get or Set the Rx2 window frequency 847 847 848 -{{info}} 849 -**AT Command:AT+RX2FQ** 850 -{{/info}} 643 +AT Command:AT+RX2FQ 851 851 852 -(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %) 853 -|=(% colspan="3" style="width: 584px;" %)AT+RX2FQ 854 -|(% style="width:183px" %)**Command Example**|(% style="width:240px" %)**Function**|(% style="width:160px" %)**Response** 855 -|(% style="width:183px" %)AT+RX2FQ=?|(% style="width:240px" %)Get the Rx2 window frequency.|(% style="width:160px" %)434665000((( 645 +|=(% colspan="3" %)AT+RX2FQ 646 +|**Command Example**|**Function**|**Response** 647 +|AT+RX2FQ=?|Get the Rx2 window frequency.|434665000((( 856 856 OK 857 857 ))) 858 -| (% style="width:183px" %)AT+RX2FQ=434665000|(% style="width:240px" %)Set the Rx2 window frequency.|(% style="width:160px" %)OK(((650 +|AT+RX2FQ=434665000|Set the Rx2 window frequency.|OK((( 859 859 860 860 ))) 861 861 ... ... @@ -863,17 +863,14 @@ 863 863 864 864 Feature: Get or Set the Transmit Power(0-5, MAX:0, MIN:5, according to LoRaWAN Spec, or 40=10dB, 41 = 11dB, …, 50 = 20dB which is out of LoRaWAN spec. ) 865 865 866 -{{info}} 867 -**AT Command:AT+TXP** 868 -{{/info}} 658 +AT Command:AT+TXP 869 869 870 -(% border="1" style="background-color:#ffffcc; color:green; width:465.222px" %) 871 -|=(% colspan="3" style="width: 462px;" %)AT+TXP 872 -|(% style="width:161px" %)**Command Example**|(% style="width:189px" %)**Function**|(% style="width:112px" %)**Response** 873 -|(% style="width:161px" %)AT+TXP=?|(% style="width:189px" %)Get the Transmit Power.|(% style="width:112px" %)0((( 660 +|=(% colspan="3" %)AT+TXP 661 +|**Command Example**|**Function**|**Response** 662 +|AT+TXP=?|Get the Transmit Power.|0((( 874 874 OK 875 875 ))) 876 -| (% style="width:161px" %)AT+TXP=1|(% style="width:189px" %)Set the Transmit Power.|(% style="width:112px" %)OK(((665 +|AT+TXP=1|Set the Transmit Power.|OK((( 877 877 878 878 ))) 879 879 ... ... @@ -881,21 +881,18 @@ 881 881 882 882 If the downlink payload=22000100, it means setting the TXP to 0. 883 883 884 -* **Example 1**: Downlink Payload:**22000102**~/~/ Set AT+TXP=2.885 -* **Example 2**: Downlink Payload:**220000FF**~/~/ Set AT+TXP=0.673 +* Example 1: Downlink Payload: 22000102 ~/~/ Set AT+TXP=2. 674 +* Example 2: Downlink Payload: 220000FF ~/~/ Set AT+TXP=0. 886 886 887 887 == 7.15 RSSI of the Last Received Packet == 888 888 889 889 Feature: Get or Set the Rx2 window frequency 890 890 891 -{{info}} 892 -**AT Command:AT+RSSI** 893 -{{/info}} 680 +AT Command:AT+RSSI 894 894 895 -(% border="1" style="background-color:#ffffcc; color:green; width:557.222px" %) 896 -|=(% colspan="3" style="width: 554px;" %)AT+RSSI 897 -|(% style="width:164px" %)**Command Example**|(% style="width:289px" %)**Function**|(% style="width:100px" %)**Response** 898 -|(% style="width:164px" %)AT+RSSI=?|(% style="width:289px" %)Get the RSSI of the last received packet.|(% style="width:100px" %)0((( 682 +|=(% colspan="3" %)AT+RSSI 683 +|**Command Example**|**Function**|**Response** 684 +|AT+RSSI=?|Get the RSSI of the last received packet.|0((( 899 899 OK 900 900 ))) 901 901 ... ... @@ -903,14 +903,11 @@ 903 903 904 904 Feature: Get the SNR of the last received packet 905 905 906 -{{info}} 907 -**AT Command:AT+SNR** 908 -{{/info}} 692 +AT Command:AT+SNR 909 909 910 -(% border="1" style="background-color:#ffffcc; color:green; width:571.222px" %) 911 -|=(% colspan="3" style="width: 568px;" %)AT+SNR 912 -|(% style="width:164px" %)**Command Example**|(% style="width:290px" %)**Function**|(% style="width:113px" %)**Response** 913 -|(% style="width:164px" %)AT+SNR=?|(% style="width:290px" %)Get the RSSI of the last received packet.|(% style="width:113px" %)0((( 694 +|=(% colspan="3" %)AT+SNR 695 +|**Command Example**|**Function**|**Response** 696 +|AT+SNR=?|Get the RSSI of the last received packet.|0((( 914 914 OK 915 915 ))) 916 916 ... ... @@ -918,144 +918,114 @@ 918 918 919 919 Feature: Get or set the application port. 920 920 921 -{{info}} 922 -**AT Command: AT+PORT** 923 -{{/info}} 704 +AT Command: AT+PORT 924 924 925 -(% border="1" style="background-color:#ffffcc; color:green; width:500.222px" %) 926 -|=(% colspan="3" style="width: 497px;" %)AT+PORT 927 -|(% style="width:157px" %)**Command Example**|(% style="width:204px" %)**Function**|(% style="width:135px" %)**Response** 928 -|(% style="width:157px" %)AT+PORT=?|(% style="width:204px" %)Get the application port|(% style="width:135px" %)21((( 706 +|=(% colspan="3" %)AT+PORT 707 +|**Command Example**|**Function**|**Response** 708 +|AT+PORT=?|Get the application port|21((( 929 929 OK 930 930 ))) 931 -| (% style="width:157px" %)AT+PORT=21|(% style="width:204px" %)Set the application port|(% style="width:135px" %)OK711 +|AT+PORT=21|Set the application port|OK 932 932 933 -{{info}} 934 -**Downlink Command: 0x23** 935 -{{/info}} 713 +Downlink Command: 0x23 936 936 937 937 Format: Command Code (0x23) followed by 1 bytes port value. 938 938 939 939 If the downlink payload=2301, it means set the application port to 1, while type code is 23. 940 940 941 -* **Example 1**: Downlink Payload:**2301**~/~/ set the application port to 1942 -* **Example 2**: Downlink Payload:**2305**~/~/ set the application port to 5719 +* Example 1: Downlink Payload: 2301 ~/~/ set the application port to 1 720 +* Example 2: Downlink Payload: 2305 ~/~/ set the application port to 5 943 943 944 944 == 7.18 Single Channel Mode == 945 945 946 946 Feature:Get or Set Frequency (Unit: Hz) for Single Channel Mode. 947 947 948 -{{info}} 949 -**AT Command: AT+CHS** 950 -{{/info}} 726 +AT Command: AT+CHS 951 951 952 -(% border="1" style="background-color:#ffffcc; color:green; width:603.222px" %) 953 -|=(% colspan="3" style="width: 600px;" %)AT+CHS 954 -|(% style="width:182px" %)**Command Example**|(% style="width:295px" %)**Function**|(% style="width:122px" %)**Response** 955 -|(% style="width:182px" %)AT+CHS=?|(% style="width:295px" %)Get Frequency for Single Channel Mode|(% style="width:122px" %)0((( 728 +|=(% colspan="3" %)AT+CHS 729 +|**Command Example**|**Function**|**Response** 730 +|AT+CHS=?|Get Frequency for Single Channel Mode|0((( 956 956 OK 957 957 ))) 958 -| (% style="width:182px" %)AT+CHS=868100000|(% style="width:295px" %)Set Frequency for Single Channel Mode|(% style="width:122px" %)OK733 +|AT+CHS=868100000|Set Frequency for Single Channel Mode|OK 959 959 960 960 == 7.19 Eight Channel Mode == 961 961 962 962 Feature: Get or Set eight channels mode,Only for US915,AU915,CN470. 963 963 964 -{{info}} 965 -**AT Command: AT+CHE** 966 -{{/info}} 739 +AT Command: AT+CHE 967 967 968 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %) 969 -|=(% colspan="3" style="width: 707px;" %)AT+CHE 970 -|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response** 971 -|(% style="width:160px" %)AT+CHE=?|(% style="width:198px" %)Get eight channels mode|(% style="width:349px" %)1((( 741 +|=(% colspan="3" %)AT+CHE 742 +|**Command Example**|**Function**|**Response** 743 +|AT+CHE=?|Get eight channels mode|1((( 972 972 902.3 902.5 902.7 902.9 903.1 903.3 903.5 903.7 973 973 974 974 OK 975 975 ))) 976 -| (% style="width:160px" %)AT+CHE=1|(% style="width:198px" %)Set eight channels mode|(% style="width:349px" %)OK748 +|AT+CHE=1|Set eight channels mode|OK 977 977 978 -{{info}} 979 -**Downlink Command: 0x24** 980 -{{/info}} 750 +Downlink Command: 0x24 981 981 982 982 Format: Command Code (0x24) followed by 1 bytes channel value. 983 983 984 984 If the downlink payload=2401, it means set channel mode to 1, while type code is 24. 985 985 986 -* **Example 1**: Downlink Payload: 2401 ~/~/ set channel mode to 1987 -* **Example 2**: Downlink Payload: 2405 ~/~/ set channel mode to 5756 +* Example 1: Downlink Payload: 2401 ~/~/ set channel mode to 1 757 +* Example 2: Downlink Payload: 2405 ~/~/ set channel mode to 5 988 988 989 989 == 7.20 Get or Set RXwindows1 timeout == 990 990 991 991 Feature:Get or Set the number of symbols to detect and timeout from RXwindow1(0 to 255). 992 992 993 -{{info}} 994 -**AT Command: AT+RX1WTO** 995 -{{/info}} 763 +AT Command: AT+RX1WTO 996 996 997 -(% border="1" style="background-color:#ffffcc; color:green; width:460.222px" %) 998 -|=(% colspan="3" style="width: 457px;" %)AT+ RX1WTO 999 -|(% style="width:163px" %)**Command Example**|(% style="width:201px" %)**Function**|(% style="width:93px" %)**Response** 1000 -|(% style="width:163px" %)AT+RX1WTO=?|(% style="width:201px" %)Get RXwindows1 timeout|(% style="width:93px" %)14((( 765 +|=(% colspan="3" %)AT+ RX1WTO 766 +|**Command Example**|**Function**|**Response** 767 +|AT+RX1WTO=?|Get RXwindows1 timeout|14((( 1001 1001 OK 1002 1002 ))) 1003 -| (% style="width:163px" %)AT+RX1WTO=60|(% style="width:201px" %)Set RXwindows1 timeout|(% style="width:93px" %)OK770 +|AT+RX1WTO=60|Set RXwindows1 timeout|OK 1004 1004 1005 -((( 1006 -**AT+RX1TWO** is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph. 1007 -))) 772 +AT+RX1TWO is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph. 1008 1008 1009 -[[image:image -20220526162535-1.png]]774 +[[~[~[image:https://wiki.dragino.com/images/thumb/5/51/RX1WTO.JPG/600px-RX1WTO.JPG~|~|alt="RX1WTO.JPG" height="239" width="600"~]~]>>url:https://wiki.dragino.com/index.php/File:RX1WTO.JPG]] 1010 1010 1011 -((( 1012 1012 Increasing thisvalue is equal to extending the time that the receiving window is opened, butthe corresponding power consumption will also increase. Properly increasingthis value can increase the success rate of the downlink. 1013 1013 1014 - 1015 -))) 1016 - 1017 1017 == 7.21 Get or Set RXwindows2 timeout == 1018 1018 1019 1019 Feature:Get or Set the number of symbols to detect and timeout from RXwindow2(0 to 255). 1020 1020 1021 -{{info}} 1022 -**AT Command: AT+RX2WTO** 1023 -{{/info}} 782 +AT Command: AT+RX2WTO 1024 1024 1025 -(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %) 1026 -|=(% colspan="3" style="width: 494px;" %)AT+ RX2WTO 1027 -|(% style="width:190px" %)**Command Example**|(% style="width:199px" %)**Function**|(% style="width:104px" %)**Response** 1028 -|(% style="width:190px" %)AT+RX2WTO=?|(% style="width:199px" %)Get RXwindows2 timeout|(% style="width:104px" %)7((( 784 +|=(% colspan="3" %)AT+ RX2WTO 785 +|**Command Example**|**Function**|**Response** 786 +|AT+RX2WTO=?|Get RXwindows2 timeout|7((( 1029 1029 OK 1030 1030 ))) 1031 -| (% style="width:190px" %)AT+RX2WTO=20|(% style="width:199px" %)Set RXwindows2 timeout|(% style="width:104px" %)OK789 +|AT+RX2WTO=20|Set RXwindows2 timeout|OK 1032 1032 1033 1033 == 7.22 Setting up uplinkdwelltime (as923, au915) == 1034 1034 1035 1035 Feature: Get or Set uplinkdwelltime 1036 1036 1037 -{{info}} 1038 -**AT Command: AT+DWELLT** 1039 -{{/info}} 795 +AT Command: AT+DWELLT 1040 1040 1041 -(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %) 1042 -|=(% colspan="3" style="width: 494px;" %)AT+DWELLT 1043 -|(% style="width:183px" %)**Command Example**|(% style="width:179px" %)**Function**|(% style="width:131px" %)**Response** 1044 -|(% style="width:183px" %)AT+DWELLT=?|(% style="width:179px" %)Get uplinkdwelltime|(% style="width:131px" %)1((( 797 +|=(% colspan="3" %)AT+DWELLT 798 +|**Command Example**|**Function**|**Response** 799 +|AT+DWELLT=?|Get uplinkdwelltime|1((( 1045 1045 OK 1046 1046 ))) 1047 -| (% style="width:183px" %)AT+DWELLT=0|(% style="width:179px" %)Set uplinkdwelltime|(% style="width:131px" %)OK802 +|AT+DWELLT=0|Set uplinkdwelltime|OK 1048 1048 1049 -{{info}} 1050 -**Downlink Command: 0x25** 1051 -{{/info}} 804 +Downlink Command: 0x25 1052 1052 1053 1053 Format: Command Code (0x25) followed by 1 bytes state value. 1054 1054 1055 1055 If the downlink payload=2501, it means set uplinkdwelltime to 1, while type code is 25. 1056 1056 1057 -* **Example 1**: Downlink Payload:**2501**~/~/ set uplinkdwelltime to 11058 -* **Example 2**: Downlink Payload:**2500**~/~/ set uplinkdwelltime to 0810 +* Example 1: Downlink Payload: 2501 ~/~/ set uplinkdwelltime to 1 811 +* Example 2: Downlink Payload: 2500 ~/~/ set uplinkdwelltime to 0 1059 1059 1060 1060 == 7.23 Set Packet Receiving Response Level == 1061 1061 ... ... @@ -1063,11 +1063,11 @@ 1063 1063 1064 1064 RPL value: 1065 1065 1066 -* **AT+RPL=0:**Device won't immediately reply any downlink commands from platform.1067 -* **AT+RPL=1:**Device will immediately reply message to Unconfirmed Data Down. Payload is 0x00.1068 -* **AT+RPL=2:**Device will immediately reply message to Confirmed Data Down. Payload is 0x00 and requied response header for this command.1069 -* **AT+RPL=3:**Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command.1070 -* **AT+RPL=4:**Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands.819 +* AT+RPL=0: Device won't immediately reply any downlink commands from platform. 820 +* AT+RPL=1: Device will immediately reply message to Unconfirmed Data Down. Payload is 0x00. 821 +* AT+RPL=2: Device will immediately reply message to Confirmed Data Down. Payload is 0x00 and requied response header for this command. 822 +* AT+RPL=3: Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command. 823 +* AT+RPL=4: Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands. 1071 1071 1072 1072 Case Analyes: 1073 1073 ... ... @@ -1075,44 +1075,37 @@ 1075 1075 * For Class C devices used in ChirpStack, need to set AT+RPL=4 because Chirpstack require immedietely reply message to MAC Command. 1076 1076 * For Class C devices used in TTI, need to set AT+RPL=4 because TTI require immediately reply message to Confirmed Data Down & MAC Command. 1077 1077 1078 -{{info}} 1079 -**AT Command: AT+RPL** 1080 -{{/info}} 831 +AT Command: AT+RPL 1081 1081 1082 -(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %) 1083 -|=(% colspan="3" style="width: 533px;" %)AT+RPL 1084 -|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response** 1085 -|(% style="width:160px" %)AT+RPL=?|(% style="width:263px" %)Get packet receiving response level|(% style="width:109px" %)1((( 833 +|=(% colspan="3" %)AT+RPL 834 +|**Command Example**|**Function**|**Response** 835 +|AT+RPL=?|Get packet receiving response level|1((( 1086 1086 OK 1087 1087 ))) 1088 -| (% style="width:160px" %)AT+RPL=0|(% style="width:263px" %)Set packet receiving response level|(% style="width:109px" %)OK838 +|AT+RPL=0|Set packet receiving response level|OK 1089 1089 1090 -{{info}} 1091 -**Downlink Command: 0x21** 1092 -{{/info}} 840 +Downlink Command: 0x21 1093 1093 1094 1094 Format: Command Code (0x21) followed by 1 bytes level value. 1095 1095 1096 1096 If the downlink payload=2101, it means set packet receiving response level to 1, while type code is 21. 1097 1097 1098 -* **Example 1**: Downlink Payload:**2101**~/~/ set packet receiving response level to 11099 -* **Example 2**: Downlink Payload:**2102**~/~/ set packet receiving response level to 2846 +* Example 1: Downlink Payload: 2101 ~/~/ set packet receiving response level to 1 847 +* Example 2: Downlink Payload: 2102 ~/~/ set packet receiving response level to 2 1100 1100 1101 1101 = 8. AT Commands Combination = 1102 1102 1103 1103 == 8.1 Set a fix RX2DR for downlink window == 1104 1104 1105 -* **AT+ADR=0**~-~-> Disable ADR first1106 -* **AT+RX2DR=xxxx**~-~-> Set xxxx to your wanted DataRate853 +* AT+ADR=0 ~-~-> Disable ADR first 854 +* AT+RX2DR=xxxx ~-~-> Set xxxx to your wanted DataRate 1107 1107 1108 1108 == 8.2 Use Downlink Command to set a fix uplink DR == 1109 1109 1110 -{{info}} 1111 -**Downlink Command: 0x22000500** 1112 -{{/info}} 858 +Downlink Command: 0x22000500 1113 1113 1114 1114 Same as: 1115 1115 1116 -* AT+ADR=0 ||anchor="H7.1AdaptiveDataRate"]]1117 -* AT+DR=5 ||anchor="H7.4DataRate"]]1118 -* AT+TXP=0 ||anchor="H7.14TransmitPower"]]862 +* AT+ADR=0 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Adaptive_Data_Rate]] 863 +* AT+DR=5 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Data_Rate]] 864 +* AT+TXP=0 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Transmit_Power]]
- image-20220511120050-1.png
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -XWiki.Xiaoling - Size
-
... ... @@ -1,1 +1,0 @@ 1 -136.3 KB - Content
- image-20220526162535-1.png
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -XWiki.Xiaoling - Size
-
... ... @@ -1,1 +1,0 @@ 1 -149.4 KB - Content