Last modified by kai on 2024/09/06 10:00
<
From version < 38.28 >
edited by Xiaoling
on 2022/05/31 09:09
To version < 50.5 >
edited by Xiaoling
on 2022/07/13 12:01
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,4 +1,4 @@
1 - **Contents：**
1 + **Table of** **Contents：**
2 2  
3 3  {{toc/}}
4 4  
... ... @@ -6,6 +6,7 @@
6 6  
7 7  = 1. Introduction =
8 8  
9 +
9 9  Dragino LoRaWAN End Node support two types of AT Commands and Downlink Commands:
10 10  
11 11  * **Common Commands:** They should be available for each sensor, such as: change uplink interval, reset device.
... ... @@ -18,6 +18,7 @@
18 18  
19 19  = 2. How to use AT Commands or Downlink command =
20 20  
22 +
21 21  * For AT Command , See Devices User Manual for Device. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
22 22  * For LoRaWAN Downlink: The gateway transfer downlink command in HEX format. This page shows the HEX format downlink code for each command. but some servers use base64 as downlink code. Below are reference for how to use downlink command:
23 23  ** Use HEX format to send a downlink: [[TTN v3>>Notes for TTN]]
... ... @@ -28,6 +28,7 @@
28 28  
29 29  = 3. Support End Node and firmware version =
30 30  
33 +
31 31  (% border="1" style="background-color:#ffffcc; color:green; width:966px" %)
32 32  |=(% colspan="3" style="width: 963px;" %)(((
33 33  Dragino STM32 base hardware Firmware / LoRaWAN stack list
... ... @@ -100,16 +100,16 @@
100 100  )))
101 101  
102 102  
106 +
103 103  = 4. System Management Commands =
104 104  
109 +
105 105  == 4.1 Change Uplink Interval ==
106 106  
112 +
107 107  Feature: Change LoRaWAN End Node Transmit Interval.
108 108  
109 -(% class="box infomessage" %)
110 -(((
111 -**AT Command: AT+TDC**
112 -)))
115 +(% style="color:blue" %)**AT Command: AT+TDC**
113 113  
114 114  (% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
115 115  |=(% colspan="3" style="width: 724px;" %)AT+TDC
... ... @@ -123,11 +123,11 @@
123 123  Set transmit interval to 60000ms = 60 seconds
124 124  )))
125 125  
126 -{{info}}
127 -**Downlink Command: 0x01**
128 -{{/info}}
129 -
130 130  (((
130 +
131 +
132 +(% style="color:blue" %)**Downlink Command: 0x01**
133 +
131 131  Format: Command Code (0x01) followed by 3 bytes time value.
132 132  )))
133 133  
... ... @@ -139,14 +139,16 @@
139 139  * **Example 2**: Downlink Payload:** 0100003C** ~/~/ Set Transmit Interval (TDC) = 60 seconds
140 140  
141 141  
145 +
142 142  == 4.2 Reboot End Node ==
143 143  
148 +
144 144  Feature: Reboot End Node to perform a new OTAA or ABP Join.
145 145  
146 -{{info}}
147 -**AT Command: ATZ**
148 -{{/info}}
149 149  
152 +(% style="color:blue" %)**AT Command: ATZ**
153 +
154 +
150 150  (% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
151 151  |=(% colspan="3" %)ATZ: Trig a reset of the MCU
152 152  |**Command Example**|**Function**|**Response**
... ... @@ -164,10 +164,10 @@
164 164  <followed by the Tx and Rx information>
165 165  )))
166 166  
167 -{{info}}
168 -**Downlink Command: 0x04**
169 -{{/info}}
170 170  
173 +(% style="color:blue" %)**Downlink Command: 0x04**
174 +
175 +
171 171  (((
172 172  Format: Command Code (0x04) followed by FF.
173 173  )))
... ... @@ -180,11 +180,10 @@
180 180  
181 181  == 4.3 Reset to factory Default ==
182 182  
188 +
183 183  Feature: Reset the parameters to Factory Default, factory default value depends on the firmware settings, the OTAA and ABP keys will reserve after this command.
184 184  
185 -{{info}}
186 -**AT Command: AT+FDR**
187 -{{/info}}
191 +(% style="color:blue" %)**AT Command: AT+FDR**
188 188  
189 189  (% border="1" style="background-color:#ffffcc; color:green; width:831.222px" %)
190 190  |=(% colspan="3" style="width: 828px;" %)Reset to factory default
... ... @@ -203,10 +203,10 @@
203 203  Please set the parameters or reset Device to apply change
204 204  )))
205 205  
206 -{{info}}
207 -**Downlink Command: 0x04**
208 -{{/info}}
209 209  
211 +(% style="color:blue" %)**Downlink Command: 0x04**
212 +
213 +
210 210  (((
211 211  Format: Command Code (0x04) followed by FE.
212 212  )))
... ... @@ -220,10 +220,10 @@
220 220  
221 221  Feature: Show firmware version. No downlink command yet.
222 222  
223 -{{info}}
224 -**AT Command: AT+VER**
225 -{{/info}}
226 226  
228 +(% style="color:blue" %)**AT Command: AT+VER**
229 +
230 +
227 227  (% border="1" style="background-color:#ffffcc; color:green; width:586px" %)
228 228  |=(% colspan="3" style="width: 583px;" %)AT+VER: Image Version and Frequency Band
229 229  |(% style="width:170px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:113px" %)**Response**
... ... @@ -233,10 +233,10 @@
233 233  OK
234 234  )))
235 235  
236 -{{info}}
237 -**Downlink Command: 0x26 (Valid in 006 stack)**
238 -{{/info}}
239 239  
241 +(% style="color:blue" %)**Downlink Command: 0x26 (Valid in 006 stack)**
242 +
243 +
240 240  (((
241 241  Downlink Format: 0x26
242 242  )))
... ... @@ -279,10 +279,10 @@
279 279  
280 280  Feature: Show All configure. No downlink command yet.
281 281  
282 -{{info}}
283 -**AT Command: AT+CFG**
284 -{{/info}}
285 285  
287 +(% style="color:blue" %)**AT Command: AT+CFG**
288 +
289 +
286 286  (% border="1" style="background-color:#ffffcc; color:green; width:599.222px" %)
287 287  |=(% colspan="3" style="width: 596px;" %)AT+CFG: Print all configurations
288 288  |(% style="width:160px" %)**Command Example**|(% style="width:154px" %)**Function**|(% style="width:280px" %)**Response**
... ... @@ -300,7 +300,6 @@
300 300  OK
301 301  )))
302 302  
303 -
304 304  = 5. Keys, IDs and EUIs management =
305 305  
306 306  == 5.1 Application EUI ==
... ... @@ -307,10 +307,10 @@
307 307  
308 308  Feature: Get or Set the Application EUI.
309 309  
310 -{{info}}
311 -**AT Command: AT+APPEUI**
312 -{{/info}}
313 313  
314 +(% style="color:blue" %)**AT Command: AT+APPEUI**
315 +
316 +
314 314  (% border="1" style="background-color:#ffffcc; color:green; width:686.222px" %)
315 315  |=(% colspan="3" style="width: 683px;" %)AT+APPEUI
316 316  |(% style="width:305px" %)**Command Example**|(% style="width:186px" %)**Function**|(% style="width:191px" %)**Response**
... ... @@ -319,15 +319,14 @@
319 319  )))
320 320  |(% style="width:305px" %)AT+APPEUI=00 b3 d5 7e f0 00 4d 34|(% style="width:186px" %)Set the Application EUI|(% style="width:191px" %)OK
321 321  
322 -
323 323  == 5.2 Application Key ==
324 324  
325 325  Feature: Get or Set the Application Key.
326 326  
327 -{{info}}
328 -**AT Command: AT+APPKEY**
329 -{{/info}}
330 330  
330 +(% style="color:blue" %)**AT Command: AT+APPKEY**
331 +
332 +
331 331  (% border="1" style="background-color:#ffffcc; color:green; width:976.222px" %)
332 332  |=(% colspan="3" style="width: 973px;" %)AT+APPKEY
333 333  |(% style="width:441px" %)**Command Example**|(% style="width:180px" %)**Function**|(% style="width:350px" %)**Response**
... ... @@ -336,16 +336,14 @@
336 336  )))
337 337  |(% style="width:441px" %)AT+APPKEY=00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35|(% style="width:180px" %)Set the Application Key|(% style="width:350px" %)OK
338 338  
339 -
340 -
341 341  == 5.3 Application Session Key ==
342 342  
343 343  Feature: Get or Set the Application Session Key.
344 344  
345 -{{info}}
346 -**AT Command: AT+APPSKEY**
347 -{{/info}}
348 348  
346 +(% style="color:blue" %)**AT Command: AT+APPSKEY**
347 +
348 +
349 349  (% border="1" style="background-color:#ffffcc; color:green; width:1040.22px" %)
350 350  |=(% colspan="3" style="width: 1037px;" %)AT+APPSKEY
351 351  |(% style="width:451px" %)**Command Example**|(% style="width:231px" %)**Function**|(% style="width:354px" %)**Response**
... ... @@ -356,16 +356,14 @@
356 356  OK
357 357  )))
358 358  
359 -
360 -
361 361  == 5.4 Device Address ==
362 362  
363 363  Feature: Get or Set the Device Address.
364 364  
365 -{{info}}
366 -**AT Command: AT+DADDR**
367 -{{/info}}
368 368  
364 +(% style="color:blue" %)**AT Command: AT+DADDR**
365 +
366 +
369 369  (% border="1" style="background-color:#ffffcc; color:green; width:795.222px" %)
370 370  |=(% colspan="3" style="width: 792px;" %)AT+DADDR
371 371  |(% style="width:192px" %)**Command Example**|(% style="width:241px" %)**Function**|(% style="width:359px" %)**Response**
... ... @@ -376,16 +376,14 @@
376 376  )))
377 377  |(% style="width:192px" %)AT+DADDR=A8 40 41 FF|(% style="width:241px" %)Set the Application Session Key.|(% style="width:359px" %)OK
378 378  
379 -
380 -
381 381  == 5.5 Device EUI ==
382 382  
383 383  Feature: Get or Set the Device EUI.
384 384  
385 -{{info}}
386 -**AT Command: AT+DEUI**
387 -{{/info}}
388 388  
382 +(% style="color:blue" %)**AT Command: AT+DEUI**
383 +
384 +
389 389  (% border="1" style="background-color:#ffffcc; color:green; width:1035.22px" %)
390 390  |=(% colspan="3" style="width: 1032px;" %)AT+DEUI
391 391  |(% style="width:250px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:634px" %)**Response**
... ... @@ -400,10 +400,10 @@
400 400  
401 401  Feature: Get or Set the Network ID.(You can enter this command change only after successful network connection)
402 402  
403 -{{info}}
404 -**AT Command: AT+NWKID**
405 -{{/info}}
406 406  
400 +(% style="color:blue" %)**AT Command: AT+NWKID**
401 +
402 +
407 407  (% border="1" style="background-color:#ffffcc; color:green; width:448.222px" %)
408 408  |=(% colspan="3" style="width: 445px;" %)AT+NWKID
409 409  |(% style="width:191px" %)**Command Example**|(% style="width:153px" %)**Function**|(% style="width:101px" %)**Response**
... ... @@ -416,10 +416,10 @@
416 416  
417 417  Feature: Get or Set the Network Session Key
418 418  
419 -{{info}}
420 -**AT Command: AT+NWKSKEY**
421 -{{/info}}
422 422  
416 +(% style="color:blue" %)**AT Command: AT+NWKSKEY**
417 +
418 +
423 423  (% border="1" style="background-color:#ffffcc; color:green; width:1017.22px" %)
424 424  |=(% colspan="3" style="width: 1014px;" %)AT+NWKSKEY
425 425  |(% style="width:455px" %)**Command Example**|(% style="width:215px" %)**Function**|(% style="width:343px" %)**Response**
... ... @@ -432,12 +432,14 @@
432 432  
433 433  == 6.1 Confirm Mode ==
434 434  
431 +=== AT+CFM command before DR-LWS007 software stack ===
432 +
435 435  Feature: Get or Set the confirmation mode (0-1).
436 436  
437 -{{info}}
438 -**AT Command: AT+CFM**
439 -{{/info}}
440 440  
436 +(% style="color:blue" %)**AT Command: AT+CFM**
437 +
438 +
441 441  (% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
442 442  |=(% colspan="3" style="width: 707px;" %)AT+CFM
443 443  |(% style="width:155px" %)**Command Example**|(% style="width:205px" %)**Function**|(% style="width:346px" %)**Response**
... ... @@ -447,7 +447,7 @@
447 447  |(% style="width:155px" %)AT+CFM=1|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)OK
448 448  |(% style="width:155px" %)AT+CFM=2|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)While Error in format, return AT_PARAM_ERROR
449 449  
450 -Downlink Command: 0x05
448 +(% style="color:blue" %)**Downlink Command: 0x05**
451 451  
452 452  Format: Command Code (0x05) followed by 2 bytes mode value.
453 453  
... ... @@ -456,14 +456,62 @@
456 456  * Example 1: Downlink Payload: 0501 ~/~/ Set AT+CFM=1
457 457  * Example 2: Downlink Payload: 0500 ~/~/ Set AT+CFM=0
458 458  
457 +=== AT+CFM command since DR-LWS007 software stack ===
458 +
459 +
460 +(% style="color:blue" %)**AT Command: AT+CFM**
461 +
462 +
463 +(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
464 +|=(% colspan="3" style="width: 707px;" %)AT+CFM
465 +|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
466 +|(% style="width:160px" %)(((
467 +AT+CFM=1,0,0
468 +
469 +value1
470 +)))|(% style="width:198px" %)confirmed uplink|(% style="width:349px" %)(((
471 +1
472 +
473 +OK
474 +)))
475 +|(% style="width:160px" %)(((
476 +AT+CFM=0,?,0
477 +
478 +value2
479 +)))|(% style="width:198px" %)set max retry , range: 0 ~~ 7|(% style="width:349px" %)(((
480 +0~~7
481 +
482 +OK
483 +)))
484 +|(% style="width:160px" %)(((
485 +AT+CFM=0,0,1
486 +
487 +value3
488 +)))|(% style="width:198px" %)uplink fcnt increase by 1 for each retry|(% style="width:349px" %)(((
489 +1
490 +
491 +OK
492 +)))
493 +
494 +
495 +(% style="color:blue" %)**Downlink Command: 0x05**
496 +
497 +
498 +Format: Command Code (0x05) followed by 2 bytes mode value.
499 +
500 +If the downlink payload=05010101, it means set end node to use confirm mode, while type code is 05.
501 +
502 +* Example 1: Downlink Payload: 05010101 ~/~/ Set AT+CFM=1,1,1
503 +* Example 2: Downlink Payload: 05000700 ~/~/ Set AT+CFM=0,7,0
504 +
459 459  == 6.2 Confirm Status ==
460 460  
461 461  Feature: Get confirmation status of the last AT+SEND (0-1).
462 462  
463 -{{info}}
464 -**AT Command: AT+CFS**
465 -{{/info}}
466 466  
510 +(% style="color:blue" %)**AT Command: AT+CFS**
511 +
512 +
467 467  (% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
468 468  |=(% colspan="3" style="width: 531px;" %)AT+CFS
469 469  |(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:178px" %)**Response**
... ... @@ -475,10 +475,10 @@
475 475  
476 476  Feature: Join network.
477 477  
478 -{{info}}
479 -**AT Command: AT+JOIN**
480 -{{/info}}
481 481  
525 +(% style="color:blue" %)**AT Command: AT+JOIN**
526 +
527 +
482 482  (% border="1" style="background-color:#ffffcc; color:green; width:647.222px" %)
483 483  |=(% colspan="3" style="width: 644px;" %)AT+JOIN
484 484  |(% style="width:163px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:334px" %)**Response**
... ... @@ -492,10 +492,10 @@
492 492  
493 493  Feature: Get or Set the Network Join Mode. (0: ABP, 1: OTAA).
494 494  
495 -{{info}}
496 -**AT Command: AT+NJM**
497 -{{/info}}
498 498  
542 +(% style="color:blue" %)**AT Command: AT+NJM**
543 +
544 +
499 499  (% border="1" style="background-color:#ffffcc; color:green; width:753.222px" %)
500 500  |=(% colspan="3" style="width: 750px;" %)AT+NJM
501 501  |(% style="width:162px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:361px" %)**Response**
... ... @@ -505,15 +505,15 @@
505 505  |(% style="width:162px" %)AT+NJM=0|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)OK
506 506  |(% style="width:162px" %)AT+NJM=2|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)While Error in format, return AT_PARAM_ERROR
507 507  
508 -{{info}}
509 -**Downlink Command: 0x20**
510 -{{/info}}
511 511  
555 +(% style="color:blue" %)**Downlink Command: 0x20**
556 +
557 +
512 512  Format: Command Code (0x20) followed by 1 bytes mode value.
513 513  
514 514  If the downlink payload=2000, it means set the Network Join Mode, while type code is 20.
515 515  
516 -* **Example 1: **Downlink Payload: **2000** ~/~/ Set AT+NJM=O
562 +* **Example 1: **Downlink Payload: **2000** ~/~/ Set AT+NJM=0
517 517  * **Example 2:** Downlink Payload: **2001** ~/~/ Set AT+NJM=1
518 518  
519 519  == 6.5 LoRa® Network Join Status ==
... ... @@ -520,10 +520,10 @@
520 520  
521 521  Feature: LoRa® Network Join Status.
522 522  
523 -{{info}}
524 -**AT Command: AT+NJS**
525 -{{/info}}
526 526  
570 +(% style="color:blue" %)**AT Command: AT+NJS**
571 +
572 +
527 527  (% border="1" style="background-color:#ffffcc; color:green; width:498.222px" %)
528 528  |=(% colspan="3" style="width: 495px;" %)AT+NJS
529 529  |(% style="width:169px" %)**Command Example**|(% style="width:164px" %)**Function**|(% style="width:161px" %)**Response**
... ... @@ -535,10 +535,10 @@
535 535  
536 536  Feature: Print Last Received Data in Raw Format<port:data>.
537 537  
538 -{{info}}
539 -**AT Command: AT+RECV**
540 -{{/info}}
541 541  
585 +(% style="color:blue" %)**AT Command: AT+RECV**
586 +
587 +
542 542  (% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
543 543  |=(% colspan="3" style="width: 584px;" %)AT+RECV
544 544  |(% style="width:161px" %)**Command Example**|(% style="width:272px" %)**Function**|(% style="width:150px" %)**Response**
... ... @@ -550,10 +550,10 @@
550 550  
551 551  Feature: Print Last Received Data in Binary Format<port:data>.
552 552  
553 -{{info}}
554 -**AT Command: AT+RECVB**
555 -{{/info}}
556 556  
600 +(% style="color:blue" %)**AT Command: AT+RECVB**
601 +
602 +
557 557  (% border="1" style="background-color:#ffffcc; color:green; width:793.222px" %)
558 558  |=(% colspan="3" style="width: 790px;" %)AT+RECVB
559 559  |(% style="width:173px" %)**Command Example**|(% style="width:497px" %)**Function**|(% style="width:120px" %)**Response**
... ... @@ -565,10 +565,10 @@
565 565  
566 566  Feature: Send Text Data<port:data>.
567 567  
568 -{{info}}
569 -**AT Command: AT+SEND**
570 -{{/info}}
571 571  
615 +(% style="color:blue" %)**AT Command: AT+SEND**
616 +
617 +
572 572  (% border="1" style="background-color:#ffffcc; color:green; width:991.222px" %)
573 573  |=(% colspan="3" style="width: 988px;" %)AT+SEND
574 574  |(% style="width:201px" %)**Command Example**|(% style="width:340px" %)**Function**|(% style="width:446px" %)**Response**
... ... @@ -584,10 +584,10 @@
584 584  
585 585  Feature: Send hexadecimal data along with the application port.
586 586  
587 -{{info}}
588 -**AT Command: AT+SENDB**
589 -{{/info}}
590 590  
634 +(% style="color:blue" %)**AT Command: AT+SENDB**
635 +
636 +
591 591  (% border="1" style="background-color:#ffffcc; color:green; width:1120.22px" %)
592 592  |=(% colspan="3" style="width: 1117px;" %)AT+SENDB
593 593  |(% style="width:257px" %)**Command Example**|(% style="width:406px" %)**Function**|(% style="width:453px" %)**Response**
... ... @@ -604,10 +604,10 @@
604 604  
605 605  Feature: Get or Set the Adaptive Data Rate setting. (0: off, 1: on).
606 606  
607 -{{info}}
608 -**AT Command: AT+ADR**
609 -{{/info}}
610 610  
654 +(% style="color:blue" %)**AT Command: AT+ADR**
655 +
656 +
611 611  (% border="1" style="background-color:#ffffcc; color:green; width:683.222px" %)
612 612  |=(% colspan="3" style="width: 680px;" %)AT+ADR
613 613  |(% style="width:162px" %)**Command Example**|(% style="width:266px" %)**Function**|(% style="width:250px" %)**Response**
... ... @@ -619,11 +619,11 @@
619 619  AT_PARAM_ERROR
620 620  )))
621 621  
622 -{{info}}
623 -**Downlink Command: 0x22**
624 -{{/info}}
625 625  
669 +(% style="color:blue" %)**Downlink Command: 0x22**
626 626  
671 +
672 +
627 627  If the downlink payload=2201, it means setting the adaptive data rate to 1, while type code is 22.
628 628  
629 629  * **Example 1**: Downlink Payload: **2201** ~/~/ Set AT+ADR=1.
... ... @@ -633,10 +633,10 @@
633 633  
634 634  Feature: Get or Set the Device Class(Currently only support class A, class C).
635 635  
636 -{{info}}
637 -**AT Command:AT+CLASS**
638 -{{/info}}
639 639  
683 +(% style="color:blue" %)**AT Command:AT+CLASS**
684 +
685 +
640 640  (% border="1" style="background-color:#ffffcc; color:green; width:507.222px" %)
641 641  |=(% colspan="3" style="width: 504px;" %)AT+CLASS
642 642  |(% style="width:163px" %)**Command Example**|(% style="width:166px" %)**Function**|(% style="width:175px" %)**Response**
... ... @@ -651,10 +651,10 @@
651 651  
652 652  Feature: Get or Set the ETSI Duty Cycle setting - 0=disable, 1=enable - Only for testing.
653 653  
654 -{{info}}
655 -**AT Command:AT+DCS**
656 -{{/info}}
657 657  
701 +(% style="color:blue" %)**AT Command:AT+DCS**
702 +
703 +
658 658  (% border="1" style="background-color:#ffffcc; color:green; width:515.222px" %)
659 659  |=(% colspan="3" style="width: 512px;" %)AT+DCS
660 660  |(% style="width:165px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:107px" %)**Response**
... ... @@ -669,10 +669,10 @@
669 669  
670 670  Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) . Note: while set Data Rate, please use set Adptive Data Rate, ADR=0 first. otherwise device will response to server's ADR command and change the DR to the setting from server
671 671  
672 -{{info}}
673 -**AT Command: AT+DR**
674 -{{/info}}
675 675  
719 +(% style="color:blue" %)**AT Command: AT+DR**
720 +
721 +
676 676  (% border="1" style="background-color:#ffffcc; color:green; width:466.222px" %)
677 677  |=(% colspan="3" style="width: 463px;" %)AT+DR
678 678  |(% style="width:156px" %)**Command Example**|(% style="width:167px" %)**Function**|(% style="width:140px" %)**Response**
... ... @@ -683,11 +683,11 @@
683 683  
684 684  )))
685 685  
686 -{{info}}
687 -**Downlink Command: 0x2200aaFF**
688 -{{/info}}
689 689  
733 +(% style="color:blue" %)**Downlink Command: 0x2200aaFF**
690 690  
735 +
736 +
691 691  If the downlink payload=220001FF, it means setting the data rate to 1, while type code is 22 00 aa FF.
692 692  
693 693  * **Example 1**: Downlink Payload: **220001FF** ~/~/ Set AT+DR=1.
... ... @@ -697,10 +697,10 @@
697 697  
698 698  Feature: Get or Set the Frame Counter Downlink.
699 699  
700 -{{info}}
701 -**AT Command:AT+FCD**
702 -{{/info}}
703 703  
747 +(% style="color:blue" %)**AT Command:AT+FCD**
748 +
749 +
704 704  (% border="1" style="background-color:#ffffcc; color:green; width:693.222px" %)
705 705  |=(% colspan="3" style="width: 690px;" %)AT+FCD
706 706  |(% style="width:162px" %)**Command Example**|(% style="width:258px" %)**Function**|(% style="width:269px" %)**Response**
... ... @@ -717,10 +717,10 @@
717 717  
718 718  Feature: Get or Set the Frame Counter Uplink.
719 719  
720 -{{info}}
721 -**AT Command:AT+FCU**
722 -{{/info}}
723 723  
767 +(% style="color:blue" %)**AT Command:AT+FCU**
768 +
769 +
724 724  (% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
725 725  |=(% colspan="3" style="width: 531px;" %)AT+FCU
726 726  |(% style="width:177px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:113px" %)**Response**
... ... @@ -735,10 +735,10 @@
735 735  
736 736  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 1 in ms.
737 737  
738 -{{info}}
739 -**AT Command:AT+JN1DL**
740 -{{/info}}
741 741  
785 +(% style="color:blue" %)**AT Command:AT+JN1DL**
786 +
787 +
742 742  (% border="1" style="background-color:#ffffcc; color:green; width:537.222px" %)
743 743  |=(% colspan="3" style="width: 534px;" %)AT+JN1DL
744 744  |(% style="width:164px" %)**Command Example**|(% style="width:229px" %)**Function**|(% style="width:140px" %)**Response**
... ... @@ -753,10 +753,10 @@
753 753  
754 754  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 2 in ms.
755 755  
756 -{{info}}
757 -**AT Command:AT+JN2DL**
758 -{{/info}}
759 759  
803 +(% style="color:blue" %)**AT Command:AT+JN2DL**
804 +
805 +
760 760  (% border="1" style="background-color:#ffffcc; color:green; width:538.222px" %)
761 761  |=(% colspan="3" style="width: 535px;" %)AT+JN2DL
762 762  |(% style="width:160px" %)**Command Example**|(% style="width:228px" %)**Function**|(% style="width:146px" %)**Response**
... ... @@ -769,12 +769,14 @@
769 769  
770 770  == 7.9 Public Network Mode ==
771 771  
772 -Feature: Get or Set the public network mode. (0: off, 1: on)
818 +Feature: Get or Set the public network mode. (0: off, 1: on). A Public LoRaWAN network use 0x34 as syncword. Default Settings; PNM=1
773 773  
774 -{{info}}
775 -**AT Command:AT+PNM**
776 -{{/info}}
820 +Notice: If user build their own LoRaWAN server but still use syncword=0x34, this is still considered a public LoRaWAN network
777 777  
822 +
823 +(% style="color:blue" %)**AT Command:AT+PNM**
824 +
825 +
778 778  (% border="1" style="background-color:#ffffcc; color:green; width:667.222px" %)
779 779  |=(% colspan="3" style="width: 664px;" %)AT+PNM
780 780  |(% style="width:166px" %)**Command Example**|(% style="width:225px" %)**Function**|(% style="width:272px" %)**Response**
... ... @@ -781,20 +781,25 @@
781 781  |(% style="width:166px" %)AT+PNM=?|(% style="width:225px" %)Get the public network mode.|(% style="width:272px" %)1(((
782 782  OK
783 783  )))
784 -|(% style="width:166px" %)AT+PNM=1|(% style="width:225px" %)Set the public network mode.|(% style="width:272px" %)(System will write new value to PNM)(((
832 +|(% style="width:166px" %)AT+PNM=1|(% style="width:225px" %)(((
833 +Set the public network mode.
834 +
835 +Set syncword=0x34
836 +)))|(% style="width:272px" %)(System will write new value to PNM)(((
785 785  OK
786 786  
787 787  
788 788  )))
841 +|(% style="width:166px" %)AT+PNM=0|(% style="width:225px" %)Set to use private network autoset syncword=0x12|(% style="width:272px" %)
789 789  
790 790  == 7.10 Receive Delay1 ==
791 791  
792 792  Feature: Get or Set the delay between the end of the Tx and the Rx Window 1 in ms
793 793  
794 -{{info}}
795 -**AT Command:AT+RX1DL**
796 -{{/info}}
797 797  
848 +(% style="color:blue" %)**AT Command:AT+RX1DL**
849 +
850 +
798 798  (% border="1" style="background-color:#ffffcc; color:green; width:408.222px" %)
799 799  |=(% colspan="3" style="width: 405px;" %)AT+RX1DL
800 800  |(% style="width:155px" %)**Command Example**|(% style="width:128px" %)**Function**|(% style="width:122px" %)**Response**
... ... @@ -809,10 +809,10 @@
809 809  
810 810  Feature: Get or Set the delay between the end of the Tx and the Rx Window 2 in ms
811 811  
812 -{{info}}
813 -**AT Command:AT+RX2DL**
814 -{{/info}}
815 815  
866 +(% style="color:blue" %)**AT Command:AT+RX2DL**
867 +
868 +
816 816  (% border="1" style="background-color:#ffffcc; color:green; width:481.222px" %)
817 817  |=(% colspan="3" style="width: 478px;" %)AT+RX2DL
818 818  |(% style="width:175px" %)**Command Example**|(% style="width:152px" %)**Function**|(% style="width:150px" %)**Response**
... ... @@ -827,10 +827,10 @@
827 827  
828 828  Feature: Get or Set the Rx2 window data rate (0-7 corresponding to DR_X)
829 829  
830 -{{info}}
831 -**AT Command:AT+RX2DR**
832 -{{/info}}
833 833  
884 +(% style="color:blue" %)**AT Command:AT+RX2DR**
885 +
886 +
834 834  (% border="1" style="background-color:#ffffcc; color:green; width:525.222px" %)
835 835  |=(% colspan="3" style="width: 522px;" %)AT+RX2DR
836 836  |(% style="width:160px" %)**Command Example**|(% style="width:232px" %)**Function**|(% style="width:130px" %)**Response**
... ... @@ -845,10 +845,10 @@
845 845  
846 846  Feature: Get or Set the Rx2 window frequency
847 847  
848 -{{info}}
849 -**AT Command:AT+RX2FQ**
850 -{{/info}}
851 851  
902 +(% style="color:blue" %)**AT Command:AT+RX2FQ**
903 +
904 +
852 852  (% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
853 853  |=(% colspan="3" style="width: 584px;" %)AT+RX2FQ
854 854  |(% style="width:183px" %)**Command Example**|(% style="width:240px" %)**Function**|(% style="width:160px" %)**Response**
... ... @@ -863,10 +863,10 @@
863 863  
864 864  Feature: Get or Set the Transmit Power(0-5, MAX:0, MIN:5, according to LoRaWAN Spec, or 40=10dB, 41 = 11dB, …, 50 = 20dB which is out of LoRaWAN spec. )
865 865  
866 -{{info}}
867 -**AT Command:AT+TXP**
868 -{{/info}}
869 869  
920 +(% style="color:blue" %)**AT Command:AT+TXP**
921 +
922 +
870 870  (% border="1" style="background-color:#ffffcc; color:green; width:465.222px" %)
871 871  |=(% colspan="3" style="width: 462px;" %)AT+TXP
872 872  |(% style="width:161px" %)**Command Example**|(% style="width:189px" %)**Function**|(% style="width:112px" %)**Response**
... ... @@ -888,10 +888,10 @@
888 888  
889 889  Feature: Get or Set the Rx2 window frequency
890 890  
891 -{{info}}
892 -**AT Command:AT+RSSI**
893 -{{/info}}
894 894  
945 +(% style="color:blue" %)**AT Command:AT+RSSI**
946 +
947 +
895 895  (% border="1" style="background-color:#ffffcc; color:green; width:557.222px" %)
896 896  |=(% colspan="3" style="width: 554px;" %)AT+RSSI
897 897  |(% style="width:164px" %)**Command Example**|(% style="width:289px" %)**Function**|(% style="width:100px" %)**Response**
... ... @@ -1098,6 +1098,129 @@
1098 1098  * **Example 1**: Downlink Payload: **2101** ~/~/ set packet receiving response level to 1
1099 1099  * **Example 2**: Downlink Payload: **2102** ~/~/ set packet receiving response level to 2
1100 1100  
1154 +== 7.24 Controls NBTrans in unconfirmed uplink mode（LWS007 NBTrans:Set retransmission packets) ==
1155 +
1156 +{{info}}
1157 +**AT Command: AT+SETMAXNBTRANS **
1158 +{{/info}}
1159 +
1160 +(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1161 +|=(% colspan="3" style="width: 533px;" %)AT+**SETMAXNBTRANS**
1162 +|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1163 +|(% style="width:160px" %)**AT+SETMAXNBTRANS=1，0**|(% style="width:263px" %)Value1: set the maximum NBTrans.|(% style="width:109px" %)1(((
1164 +OK
1165 +)))
1166 +|(% style="width:160px" %)**AT+SETMAXNBTRANS=？，1**|(% style="width:263px" %)value2: 0: uplink fcnt doesn't change for each NBTrans; 1: uplink fcnt increase by 1 for each NBTrans.|(% style="width:109px" %)(((
1167 +1
1168 +
1169 +OK
1170 +)))
1171 +
1172 +{{info}}
1173 +**Downlink Command: 0x33**
1174 +{{/info}}
1175 +
1176 +Format: Command Code (0x33) followed by 2 bytes mode value.
1177 +
1178 +If the downlink payload=330100, it means set end node to use confirm mode, while type code is 33.
1179 +
1180 +* Example 1: Downlink Payload: 330100 ~/~/ Set AT+SETMAXNBTRANS=1,0
1181 +* Example 2: Downlink Payload: 330201 ~/~/ Set AT+SETMAXNBTRANS=2,1
1182 +
1183 +== 7.25 Device offline rejoining （LWS007) ==
1184 +
1185 +{{info}}
1186 +**AT Command: AT+DDETECT**
1187 +{{/info}}
1188 +
1189 +(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
1190 +|=(% colspan="3" style="width: 707px;" %)AT+**DDETECT**
1191 +|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
1192 +|(% style="width:160px" %)(((
1193 +AT+DDETECT=1,1440,2880
1194 +
1195 +value1
1196 +)))|(% style="width:198px" %)Enable online detect|(% style="width:349px" %)(((
1197 +1
1198 +
1199 +OK
1200 +)))
1201 +|(% style="width:160px" %)(((
1202 +AT+DDETECT=1,?,2880
1203 +
1204 +value2
1205 +)))|(% style="width:198px" %)Online detection packet sending time|(% style="width:349px" %)(((
1206 +
1207 +
1208 +OK
1209 +)))
1210 +|(% style="width:160px" %)(((
1211 +AT+DDETECT=1,1440,？
1212 +
1213 +value3
1214 +)))|(% style="width:198px" %)Process rejoin|(% style="width:349px" %)(((
1215 +
1216 +
1217 +OK
1218 +)))
1219 +
1220 +{{info}}
1221 +**Downlink Command: 0x33**
1222 +{{/info}}
1223 +
1224 +Format: Command Code (0x32) followed by 2 bytes mode value.
1225 +
1226 +If the downlink payload=320105A00B40, it means set end node to use confirm mode, while type code is 33.
1227 +
1228 +* Example 1: Downlink Payload: 320105A00B40 ~/~/ Set AT+DDETECT=1,1440,2880
1229 +
1230 +== 7.26 Request the server to send an ACK ==
1231 +
1232 +{{info}}
1233 +**AT Command: AT+PNACKMD**
1234 +{{/info}}
1235 +
1236 +(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1237 +|=(% colspan="3" style="width: 533px;" %)**AT+PNACKMD**
1238 +|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1239 +|(% style="width:160px" %)**AT+PNACKMD=1**|(% style="width:263px" %)If the node uploads the ACK as confirm, it will request the server to send an ACK. If the server ack is not received, the node will upload the packets that have not received the ACK the next time it receives the ACK|(% style="width:109px" %)1(((
1240 +OK
1241 +)))
1242 +|(% style="width:160px" %)**AT+PNACKMD=0**|(% style="width:263px" %)off request the server to send an ACK|(% style="width:109px" %)(((
1243 +0
1244 +
1245 +OK
1246 +)))
1247 +
1248 +== 7.27 Adjust network rejoining interval ==
1249 +
1250 +{{info}}
1251 +**AT Command: AT+RJTDC**
1252 +{{/info}}
1253 +
1254 +(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
1255 +|=(% colspan="3" style="width: 724px;" %)AT+RJTDC
1256 +|(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
1257 +|(% style="width:165px" %)AT+RJTDC=?|(% style="width:227px" %)Show the ReJoin data transmission interval in min|(% style="width:329px" %)30000(((
1258 +OK
1259 +
1260 +the interval is 30000ms = 30s
1261 +)))
1262 +|(% style="width:165px" %)AT+RJTDC=60000|(% style="width:227px" %)Set the ReJoin data transmission interval in min|(% style="width:329px" %)OK(((
1263 +Set the ReJoin data transmission interval to 60000ms = 60 seconds
1264 +)))
1265 +
1266 +{{info}}
1267 +**Downlink Command: 0x26**
1268 +{{/info}}
1269 +
1270 +Format: Command Code (0x26) followed by 2 bytes mode value.
1271 +
1272 +If the downlink payload=26000A, it means set end node to use confirm mode, while type code is 26.
1273 +
1274 +* Example 1: Downlink Payload: 26000A ~/~/ Set AT+RJTDC=10
1275 +* Example 2: Downlink Payload: 260002 ~/~/ Set AT+RJTDC=2
1276 +
1101 1101  = 8. AT Commands Combination =
1102 1102  
1103 1103  == 8.1 Set a fix RX2DR for downlink window ==
... ... @@ -1116,3 +1116,4 @@
1116 1116  * AT+ADR=0  [[Reference>>||anchor="H7.1AdaptiveDataRate"]]
1117 1117  * AT+DR=5  [[Reference>>||anchor="H7.4DataRate"]]
1118 1118  * AT+TXP=0  [[Reference>>||anchor="H7.14TransmitPower"]]
1295 +~)~)~)

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0