Last modified by kai on 2024/09/06 10:00
<
From version < 38.24 >
edited by Xiaoling
on 2022/05/31 09:08
To version < 50.5 >
edited by Xiaoling
on 2022/07/13 12:01
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,4 +1,4 @@
1 - **Contents：**
1 + **Table of** **Contents：**
2 2  
3 3  {{toc/}}
4 4  
... ... @@ -6,6 +6,7 @@
6 6  
7 7  = 1. Introduction =
8 8  
9 +
9 9  Dragino LoRaWAN End Node support two types of AT Commands and Downlink Commands:
10 10  
11 11  * **Common Commands:** They should be available for each sensor, such as: change uplink interval, reset device.
... ... @@ -18,6 +18,7 @@
18 18  
19 19  = 2. How to use AT Commands or Downlink command =
20 20  
22 +
21 21  * For AT Command , See Devices User Manual for Device. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
22 22  * For LoRaWAN Downlink: The gateway transfer downlink command in HEX format. This page shows the HEX format downlink code for each command. but some servers use base64 as downlink code. Below are reference for how to use downlink command:
23 23  ** Use HEX format to send a downlink: [[TTN v3>>Notes for TTN]]
... ... @@ -24,8 +24,11 @@
24 24  ** Use Base64 format to send a downlink: [[Chirpstack>>Notes for ChirpStack]]
25 25  ** See use note for more serves [[Servers Note>>doc:Main.WebHome]](IoT LoRaWAN Server)
26 26  
29 +
30 +
27 27  = 3. Support End Node and firmware version =
28 28  
33 +
29 29  (% border="1" style="background-color:#ffffcc; color:green; width:966px" %)
30 30  |=(% colspan="3" style="width: 963px;" %)(((
31 31  Dragino STM32 base hardware Firmware / LoRaWAN stack list
... ... @@ -101,14 +101,13 @@
101 101  
102 102  = 4. System Management Commands =
103 103  
109 +
104 104  == 4.1 Change Uplink Interval ==
105 105  
112 +
106 106  Feature: Change LoRaWAN End Node Transmit Interval.
107 107  
108 -(% class="box infomessage" %)
109 -(((
110 -**AT Command: AT+TDC**
111 -)))
115 +(% style="color:blue" %)**AT Command: AT+TDC**
112 112  
113 113  (% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
114 114  |=(% colspan="3" style="width: 724px;" %)AT+TDC
... ... @@ -122,11 +122,11 @@
122 122  Set transmit interval to 60000ms = 60 seconds
123 123  )))
124 124  
125 -{{info}}
126 -**Downlink Command: 0x01**
127 -{{/info}}
128 -
129 129  (((
130 +
131 +
132 +(% style="color:blue" %)**Downlink Command: 0x01**
133 +
130 130  Format: Command Code (0x01) followed by 3 bytes time value.
131 131  )))
132 132  
... ... @@ -141,12 +141,13 @@
141 141  
142 142  == 4.2 Reboot End Node ==
143 143  
148 +
144 144  Feature: Reboot End Node to perform a new OTAA or ABP Join.
145 145  
146 -{{info}}
147 -**AT Command: ATZ**
148 -{{/info}}
149 149  
152 +(% style="color:blue" %)**AT Command: ATZ**
153 +
154 +
150 150  (% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
151 151  |=(% colspan="3" %)ATZ: Trig a reset of the MCU
152 152  |**Command Example**|**Function**|**Response**
... ... @@ -164,10 +164,10 @@
164 164  <followed by the Tx and Rx information>
165 165  )))
166 166  
167 -{{info}}
168 -**Downlink Command: 0x04**
169 -{{/info}}
170 170  
173 +(% style="color:blue" %)**Downlink Command: 0x04**
174 +
175 +
171 171  (((
172 172  Format: Command Code (0x04) followed by FF.
173 173  )))
... ... @@ -180,11 +180,10 @@
180 180  
181 181  == 4.3 Reset to factory Default ==
182 182  
188 +
183 183  Feature: Reset the parameters to Factory Default, factory default value depends on the firmware settings, the OTAA and ABP keys will reserve after this command.
184 184  
185 -{{info}}
186 -**AT Command: AT+FDR**
187 -{{/info}}
191 +(% style="color:blue" %)**AT Command: AT+FDR**
188 188  
189 189  (% border="1" style="background-color:#ffffcc; color:green; width:831.222px" %)
190 190  |=(% colspan="3" style="width: 828px;" %)Reset to factory default
... ... @@ -203,10 +203,10 @@
203 203  Please set the parameters or reset Device to apply change
204 204  )))
205 205  
206 -{{info}}
207 -**Downlink Command: 0x04**
208 -{{/info}}
209 209  
211 +(% style="color:blue" %)**Downlink Command: 0x04**
212 +
213 +
210 210  (((
211 211  Format: Command Code (0x04) followed by FE.
212 212  )))
... ... @@ -220,10 +220,10 @@
220 220  
221 221  Feature: Show firmware version. No downlink command yet.
222 222  
223 -{{info}}
224 -**AT Command: AT+VER**
225 -{{/info}}
226 226  
228 +(% style="color:blue" %)**AT Command: AT+VER**
229 +
230 +
227 227  (% border="1" style="background-color:#ffffcc; color:green; width:586px" %)
228 228  |=(% colspan="3" style="width: 583px;" %)AT+VER: Image Version and Frequency Band
229 229  |(% style="width:170px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:113px" %)**Response**
... ... @@ -233,10 +233,10 @@
233 233  OK
234 234  )))
235 235  
236 -{{info}}
237 -**Downlink Command: 0x26 (Valid in 006 stack)**
238 -{{/info}}
239 239  
241 +(% style="color:blue" %)**Downlink Command: 0x26 (Valid in 006 stack)**
242 +
243 +
240 240  (((
241 241  Downlink Format: 0x26
242 242  )))
... ... @@ -279,10 +279,10 @@
279 279  
280 280  Feature: Show All configure. No downlink command yet.
281 281  
282 -{{info}}
283 -**AT Command: AT+CFG**
284 -{{/info}}
285 285  
287 +(% style="color:blue" %)**AT Command: AT+CFG**
288 +
289 +
286 286  (% border="1" style="background-color:#ffffcc; color:green; width:599.222px" %)
287 287  |=(% colspan="3" style="width: 596px;" %)AT+CFG: Print all configurations
288 288  |(% style="width:160px" %)**Command Example**|(% style="width:154px" %)**Function**|(% style="width:280px" %)**Response**
... ... @@ -300,8 +300,6 @@
300 300  OK
301 301  )))
302 302  
303 -
304 -
305 305  = 5. Keys, IDs and EUIs management =
306 306  
307 307  == 5.1 Application EUI ==
... ... @@ -308,10 +308,10 @@
308 308  
309 309  Feature: Get or Set the Application EUI.
310 310  
311 -{{info}}
312 -**AT Command: AT+APPEUI**
313 -{{/info}}
314 314  
314 +(% style="color:blue" %)**AT Command: AT+APPEUI**
315 +
316 +
315 315  (% border="1" style="background-color:#ffffcc; color:green; width:686.222px" %)
316 316  |=(% colspan="3" style="width: 683px;" %)AT+APPEUI
317 317  |(% style="width:305px" %)**Command Example**|(% style="width:186px" %)**Function**|(% style="width:191px" %)**Response**
... ... @@ -320,16 +320,14 @@
320 320  )))
321 321  |(% style="width:305px" %)AT+APPEUI=00 b3 d5 7e f0 00 4d 34|(% style="width:186px" %)Set the Application EUI|(% style="width:191px" %)OK
322 322  
323 -
324 -
325 325  == 5.2 Application Key ==
326 326  
327 327  Feature: Get or Set the Application Key.
328 328  
329 -{{info}}
330 -**AT Command: AT+APPKEY**
331 -{{/info}}
332 332  
330 +(% style="color:blue" %)**AT Command: AT+APPKEY**
331 +
332 +
333 333  (% border="1" style="background-color:#ffffcc; color:green; width:976.222px" %)
334 334  |=(% colspan="3" style="width: 973px;" %)AT+APPKEY
335 335  |(% style="width:441px" %)**Command Example**|(% style="width:180px" %)**Function**|(% style="width:350px" %)**Response**
... ... @@ -342,10 +342,10 @@
342 342  
343 343  Feature: Get or Set the Application Session Key.
344 344  
345 -{{info}}
346 -**AT Command: AT+APPSKEY**
347 -{{/info}}
348 348  
346 +(% style="color:blue" %)**AT Command: AT+APPSKEY**
347 +
348 +
349 349  (% border="1" style="background-color:#ffffcc; color:green; width:1040.22px" %)
350 350  |=(% colspan="3" style="width: 1037px;" %)AT+APPSKEY
351 351  |(% style="width:451px" %)**Command Example**|(% style="width:231px" %)**Function**|(% style="width:354px" %)**Response**
... ... @@ -360,10 +360,10 @@
360 360  
361 361  Feature: Get or Set the Device Address.
362 362  
363 -{{info}}
364 -**AT Command: AT+DADDR**
365 -{{/info}}
366 366  
364 +(% style="color:blue" %)**AT Command: AT+DADDR**
365 +
366 +
367 367  (% border="1" style="background-color:#ffffcc; color:green; width:795.222px" %)
368 368  |=(% colspan="3" style="width: 792px;" %)AT+DADDR
369 369  |(% style="width:192px" %)**Command Example**|(% style="width:241px" %)**Function**|(% style="width:359px" %)**Response**
... ... @@ -378,10 +378,10 @@
378 378  
379 379  Feature: Get or Set the Device EUI.
380 380  
381 -{{info}}
382 -**AT Command: AT+DEUI**
383 -{{/info}}
384 384  
382 +(% style="color:blue" %)**AT Command: AT+DEUI**
383 +
384 +
385 385  (% border="1" style="background-color:#ffffcc; color:green; width:1035.22px" %)
386 386  |=(% colspan="3" style="width: 1032px;" %)AT+DEUI
387 387  |(% style="width:250px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:634px" %)**Response**
... ... @@ -396,10 +396,10 @@
396 396  
397 397  Feature: Get or Set the Network ID.(You can enter this command change only after successful network connection)
398 398  
399 -{{info}}
400 -**AT Command: AT+NWKID**
401 -{{/info}}
402 402  
400 +(% style="color:blue" %)**AT Command: AT+NWKID**
401 +
402 +
403 403  (% border="1" style="background-color:#ffffcc; color:green; width:448.222px" %)
404 404  |=(% colspan="3" style="width: 445px;" %)AT+NWKID
405 405  |(% style="width:191px" %)**Command Example**|(% style="width:153px" %)**Function**|(% style="width:101px" %)**Response**
... ... @@ -412,10 +412,10 @@
412 412  
413 413  Feature: Get or Set the Network Session Key
414 414  
415 -{{info}}
416 -**AT Command: AT+NWKSKEY**
417 -{{/info}}
418 418  
416 +(% style="color:blue" %)**AT Command: AT+NWKSKEY**
417 +
418 +
419 419  (% border="1" style="background-color:#ffffcc; color:green; width:1017.22px" %)
420 420  |=(% colspan="3" style="width: 1014px;" %)AT+NWKSKEY
421 421  |(% style="width:455px" %)**Command Example**|(% style="width:215px" %)**Function**|(% style="width:343px" %)**Response**
... ... @@ -428,12 +428,14 @@
428 428  
429 429  == 6.1 Confirm Mode ==
430 430  
431 +=== AT+CFM command before DR-LWS007 software stack ===
432 +
431 431  Feature: Get or Set the confirmation mode (0-1).
432 432  
433 -{{info}}
434 -**AT Command: AT+CFM**
435 -{{/info}}
436 436  
436 +(% style="color:blue" %)**AT Command: AT+CFM**
437 +
438 +
437 437  (% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
438 438  |=(% colspan="3" style="width: 707px;" %)AT+CFM
439 439  |(% style="width:155px" %)**Command Example**|(% style="width:205px" %)**Function**|(% style="width:346px" %)**Response**
... ... @@ -443,7 +443,7 @@
443 443  |(% style="width:155px" %)AT+CFM=1|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)OK
444 444  |(% style="width:155px" %)AT+CFM=2|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)While Error in format, return AT_PARAM_ERROR
445 445  
446 -Downlink Command: 0x05
448 +(% style="color:blue" %)**Downlink Command: 0x05**
447 447  
448 448  Format: Command Code (0x05) followed by 2 bytes mode value.
449 449  
... ... @@ -452,14 +452,62 @@
452 452  * Example 1: Downlink Payload: 0501 ~/~/ Set AT+CFM=1
453 453  * Example 2: Downlink Payload: 0500 ~/~/ Set AT+CFM=0
454 454  
457 +=== AT+CFM command since DR-LWS007 software stack ===
458 +
459 +
460 +(% style="color:blue" %)**AT Command: AT+CFM**
461 +
462 +
463 +(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
464 +|=(% colspan="3" style="width: 707px;" %)AT+CFM
465 +|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
466 +|(% style="width:160px" %)(((
467 +AT+CFM=1,0,0
468 +
469 +value1
470 +)))|(% style="width:198px" %)confirmed uplink|(% style="width:349px" %)(((
471 +1
472 +
473 +OK
474 +)))
475 +|(% style="width:160px" %)(((
476 +AT+CFM=0,?,0
477 +
478 +value2
479 +)))|(% style="width:198px" %)set max retry , range: 0 ~~ 7|(% style="width:349px" %)(((
480 +0~~7
481 +
482 +OK
483 +)))
484 +|(% style="width:160px" %)(((
485 +AT+CFM=0,0,1
486 +
487 +value3
488 +)))|(% style="width:198px" %)uplink fcnt increase by 1 for each retry|(% style="width:349px" %)(((
489 +1
490 +
491 +OK
492 +)))
493 +
494 +
495 +(% style="color:blue" %)**Downlink Command: 0x05**
496 +
497 +
498 +Format: Command Code (0x05) followed by 2 bytes mode value.
499 +
500 +If the downlink payload=05010101, it means set end node to use confirm mode, while type code is 05.
501 +
502 +* Example 1: Downlink Payload: 05010101 ~/~/ Set AT+CFM=1,1,1
503 +* Example 2: Downlink Payload: 05000700 ~/~/ Set AT+CFM=0,7,0
504 +
455 455  == 6.2 Confirm Status ==
456 456  
457 457  Feature: Get confirmation status of the last AT+SEND (0-1).
458 458  
459 -{{info}}
460 -**AT Command: AT+CFS**
461 -{{/info}}
462 462  
510 +(% style="color:blue" %)**AT Command: AT+CFS**
511 +
512 +
463 463  (% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
464 464  |=(% colspan="3" style="width: 531px;" %)AT+CFS
465 465  |(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:178px" %)**Response**
... ... @@ -471,10 +471,10 @@
471 471  
472 472  Feature: Join network.
473 473  
474 -{{info}}
475 -**AT Command: AT+JOIN**
476 -{{/info}}
477 477  
525 +(% style="color:blue" %)**AT Command: AT+JOIN**
526 +
527 +
478 478  (% border="1" style="background-color:#ffffcc; color:green; width:647.222px" %)
479 479  |=(% colspan="3" style="width: 644px;" %)AT+JOIN
480 480  |(% style="width:163px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:334px" %)**Response**
... ... @@ -488,10 +488,10 @@
488 488  
489 489  Feature: Get or Set the Network Join Mode. (0: ABP, 1: OTAA).
490 490  
491 -{{info}}
492 -**AT Command: AT+NJM**
493 -{{/info}}
494 494  
542 +(% style="color:blue" %)**AT Command: AT+NJM**
543 +
544 +
495 495  (% border="1" style="background-color:#ffffcc; color:green; width:753.222px" %)
496 496  |=(% colspan="3" style="width: 750px;" %)AT+NJM
497 497  |(% style="width:162px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:361px" %)**Response**
... ... @@ -501,15 +501,15 @@
501 501  |(% style="width:162px" %)AT+NJM=0|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)OK
502 502  |(% style="width:162px" %)AT+NJM=2|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)While Error in format, return AT_PARAM_ERROR
503 503  
504 -{{info}}
505 -**Downlink Command: 0x20**
506 -{{/info}}
507 507  
555 +(% style="color:blue" %)**Downlink Command: 0x20**
556 +
557 +
508 508  Format: Command Code (0x20) followed by 1 bytes mode value.
509 509  
510 510  If the downlink payload=2000, it means set the Network Join Mode, while type code is 20.
511 511  
512 -* **Example 1: **Downlink Payload: **2000** ~/~/ Set AT+NJM=O
562 +* **Example 1: **Downlink Payload: **2000** ~/~/ Set AT+NJM=0
513 513  * **Example 2:** Downlink Payload: **2001** ~/~/ Set AT+NJM=1
514 514  
515 515  == 6.5 LoRa® Network Join Status ==
... ... @@ -516,10 +516,10 @@
516 516  
517 517  Feature: LoRa® Network Join Status.
518 518  
519 -{{info}}
520 -**AT Command: AT+NJS**
521 -{{/info}}
522 522  
570 +(% style="color:blue" %)**AT Command: AT+NJS**
571 +
572 +
523 523  (% border="1" style="background-color:#ffffcc; color:green; width:498.222px" %)
524 524  |=(% colspan="3" style="width: 495px;" %)AT+NJS
525 525  |(% style="width:169px" %)**Command Example**|(% style="width:164px" %)**Function**|(% style="width:161px" %)**Response**
... ... @@ -531,10 +531,10 @@
531 531  
532 532  Feature: Print Last Received Data in Raw Format<port:data>.
533 533  
534 -{{info}}
535 -**AT Command: AT+RECV**
536 -{{/info}}
537 537  
585 +(% style="color:blue" %)**AT Command: AT+RECV**
586 +
587 +
538 538  (% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
539 539  |=(% colspan="3" style="width: 584px;" %)AT+RECV
540 540  |(% style="width:161px" %)**Command Example**|(% style="width:272px" %)**Function**|(% style="width:150px" %)**Response**
... ... @@ -546,10 +546,10 @@
546 546  
547 547  Feature: Print Last Received Data in Binary Format<port:data>.
548 548  
549 -{{info}}
550 -**AT Command: AT+RECVB**
551 -{{/info}}
552 552  
600 +(% style="color:blue" %)**AT Command: AT+RECVB**
601 +
602 +
553 553  (% border="1" style="background-color:#ffffcc; color:green; width:793.222px" %)
554 554  |=(% colspan="3" style="width: 790px;" %)AT+RECVB
555 555  |(% style="width:173px" %)**Command Example**|(% style="width:497px" %)**Function**|(% style="width:120px" %)**Response**
... ... @@ -561,10 +561,10 @@
561 561  
562 562  Feature: Send Text Data<port:data>.
563 563  
564 -{{info}}
565 -**AT Command: AT+SEND**
566 -{{/info}}
567 567  
615 +(% style="color:blue" %)**AT Command: AT+SEND**
616 +
617 +
568 568  (% border="1" style="background-color:#ffffcc; color:green; width:991.222px" %)
569 569  |=(% colspan="3" style="width: 988px;" %)AT+SEND
570 570  |(% style="width:201px" %)**Command Example**|(% style="width:340px" %)**Function**|(% style="width:446px" %)**Response**
... ... @@ -580,10 +580,10 @@
580 580  
581 581  Feature: Send hexadecimal data along with the application port.
582 582  
583 -{{info}}
584 -**AT Command: AT+SENDB**
585 -{{/info}}
586 586  
634 +(% style="color:blue" %)**AT Command: AT+SENDB**
635 +
636 +
587 587  (% border="1" style="background-color:#ffffcc; color:green; width:1120.22px" %)
588 588  |=(% colspan="3" style="width: 1117px;" %)AT+SENDB
589 589  |(% style="width:257px" %)**Command Example**|(% style="width:406px" %)**Function**|(% style="width:453px" %)**Response**
... ... @@ -600,10 +600,10 @@
600 600  
601 601  Feature: Get or Set the Adaptive Data Rate setting. (0: off, 1: on).
602 602  
603 -{{info}}
604 -**AT Command: AT+ADR**
605 -{{/info}}
606 606  
654 +(% style="color:blue" %)**AT Command: AT+ADR**
655 +
656 +
607 607  (% border="1" style="background-color:#ffffcc; color:green; width:683.222px" %)
608 608  |=(% colspan="3" style="width: 680px;" %)AT+ADR
609 609  |(% style="width:162px" %)**Command Example**|(% style="width:266px" %)**Function**|(% style="width:250px" %)**Response**
... ... @@ -615,11 +615,11 @@
615 615  AT_PARAM_ERROR
616 616  )))
617 617  
618 -{{info}}
619 -**Downlink Command: 0x22**
620 -{{/info}}
621 621  
669 +(% style="color:blue" %)**Downlink Command: 0x22**
622 622  
671 +
672 +
623 623  If the downlink payload=2201, it means setting the adaptive data rate to 1, while type code is 22.
624 624  
625 625  * **Example 1**: Downlink Payload: **2201** ~/~/ Set AT+ADR=1.
... ... @@ -629,10 +629,10 @@
629 629  
630 630  Feature: Get or Set the Device Class(Currently only support class A, class C).
631 631  
632 -{{info}}
633 -**AT Command:AT+CLASS**
634 -{{/info}}
635 635  
683 +(% style="color:blue" %)**AT Command:AT+CLASS**
684 +
685 +
636 636  (% border="1" style="background-color:#ffffcc; color:green; width:507.222px" %)
637 637  |=(% colspan="3" style="width: 504px;" %)AT+CLASS
638 638  |(% style="width:163px" %)**Command Example**|(% style="width:166px" %)**Function**|(% style="width:175px" %)**Response**
... ... @@ -647,10 +647,10 @@
647 647  
648 648  Feature: Get or Set the ETSI Duty Cycle setting - 0=disable, 1=enable - Only for testing.
649 649  
650 -{{info}}
651 -**AT Command:AT+DCS**
652 -{{/info}}
653 653  
701 +(% style="color:blue" %)**AT Command:AT+DCS**
702 +
703 +
654 654  (% border="1" style="background-color:#ffffcc; color:green; width:515.222px" %)
655 655  |=(% colspan="3" style="width: 512px;" %)AT+DCS
656 656  |(% style="width:165px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:107px" %)**Response**
... ... @@ -665,10 +665,10 @@
665 665  
666 666  Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) . Note: while set Data Rate, please use set Adptive Data Rate, ADR=0 first. otherwise device will response to server's ADR command and change the DR to the setting from server
667 667  
668 -{{info}}
669 -**AT Command: AT+DR**
670 -{{/info}}
671 671  
719 +(% style="color:blue" %)**AT Command: AT+DR**
720 +
721 +
672 672  (% border="1" style="background-color:#ffffcc; color:green; width:466.222px" %)
673 673  |=(% colspan="3" style="width: 463px;" %)AT+DR
674 674  |(% style="width:156px" %)**Command Example**|(% style="width:167px" %)**Function**|(% style="width:140px" %)**Response**
... ... @@ -679,11 +679,11 @@
679 679  
680 680  )))
681 681  
682 -{{info}}
683 -**Downlink Command: 0x2200aaFF**
684 -{{/info}}
685 685  
733 +(% style="color:blue" %)**Downlink Command: 0x2200aaFF**
686 686  
735 +
736 +
687 687  If the downlink payload=220001FF, it means setting the data rate to 1, while type code is 22 00 aa FF.
688 688  
689 689  * **Example 1**: Downlink Payload: **220001FF** ~/~/ Set AT+DR=1.
... ... @@ -693,10 +693,10 @@
693 693  
694 694  Feature: Get or Set the Frame Counter Downlink.
695 695  
696 -{{info}}
697 -**AT Command:AT+FCD**
698 -{{/info}}
699 699  
747 +(% style="color:blue" %)**AT Command:AT+FCD**
748 +
749 +
700 700  (% border="1" style="background-color:#ffffcc; color:green; width:693.222px" %)
701 701  |=(% colspan="3" style="width: 690px;" %)AT+FCD
702 702  |(% style="width:162px" %)**Command Example**|(% style="width:258px" %)**Function**|(% style="width:269px" %)**Response**
... ... @@ -713,10 +713,10 @@
713 713  
714 714  Feature: Get or Set the Frame Counter Uplink.
715 715  
716 -{{info}}
717 -**AT Command:AT+FCU**
718 -{{/info}}
719 719  
767 +(% style="color:blue" %)**AT Command:AT+FCU**
768 +
769 +
720 720  (% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
721 721  |=(% colspan="3" style="width: 531px;" %)AT+FCU
722 722  |(% style="width:177px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:113px" %)**Response**
... ... @@ -731,10 +731,10 @@
731 731  
732 732  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 1 in ms.
733 733  
734 -{{info}}
735 -**AT Command:AT+JN1DL**
736 -{{/info}}
737 737  
785 +(% style="color:blue" %)**AT Command:AT+JN1DL**
786 +
787 +
738 738  (% border="1" style="background-color:#ffffcc; color:green; width:537.222px" %)
739 739  |=(% colspan="3" style="width: 534px;" %)AT+JN1DL
740 740  |(% style="width:164px" %)**Command Example**|(% style="width:229px" %)**Function**|(% style="width:140px" %)**Response**
... ... @@ -749,10 +749,10 @@
749 749  
750 750  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 2 in ms.
751 751  
752 -{{info}}
753 -**AT Command:AT+JN2DL**
754 -{{/info}}
755 755  
803 +(% style="color:blue" %)**AT Command:AT+JN2DL**
804 +
805 +
756 756  (% border="1" style="background-color:#ffffcc; color:green; width:538.222px" %)
757 757  |=(% colspan="3" style="width: 535px;" %)AT+JN2DL
758 758  |(% style="width:160px" %)**Command Example**|(% style="width:228px" %)**Function**|(% style="width:146px" %)**Response**
... ... @@ -765,12 +765,14 @@
765 765  
766 766  == 7.9 Public Network Mode ==
767 767  
768 -Feature: Get or Set the public network mode. (0: off, 1: on)
818 +Feature: Get or Set the public network mode. (0: off, 1: on). A Public LoRaWAN network use 0x34 as syncword. Default Settings; PNM=1
769 769  
770 -{{info}}
771 -**AT Command:AT+PNM**
772 -{{/info}}
820 +Notice: If user build their own LoRaWAN server but still use syncword=0x34, this is still considered a public LoRaWAN network
773 773  
822 +
823 +(% style="color:blue" %)**AT Command:AT+PNM**
824 +
825 +
774 774  (% border="1" style="background-color:#ffffcc; color:green; width:667.222px" %)
775 775  |=(% colspan="3" style="width: 664px;" %)AT+PNM
776 776  |(% style="width:166px" %)**Command Example**|(% style="width:225px" %)**Function**|(% style="width:272px" %)**Response**
... ... @@ -777,20 +777,25 @@
777 777  |(% style="width:166px" %)AT+PNM=?|(% style="width:225px" %)Get the public network mode.|(% style="width:272px" %)1(((
778 778  OK
779 779  )))
780 -|(% style="width:166px" %)AT+PNM=1|(% style="width:225px" %)Set the public network mode.|(% style="width:272px" %)(System will write new value to PNM)(((
832 +|(% style="width:166px" %)AT+PNM=1|(% style="width:225px" %)(((
833 +Set the public network mode.
834 +
835 +Set syncword=0x34
836 +)))|(% style="width:272px" %)(System will write new value to PNM)(((
781 781  OK
782 782  
783 783  
784 784  )))
841 +|(% style="width:166px" %)AT+PNM=0|(% style="width:225px" %)Set to use private network autoset syncword=0x12|(% style="width:272px" %)
785 785  
786 786  == 7.10 Receive Delay1 ==
787 787  
788 788  Feature: Get or Set the delay between the end of the Tx and the Rx Window 1 in ms
789 789  
790 -{{info}}
791 -**AT Command:AT+RX1DL**
792 -{{/info}}
793 793  
848 +(% style="color:blue" %)**AT Command:AT+RX1DL**
849 +
850 +
794 794  (% border="1" style="background-color:#ffffcc; color:green; width:408.222px" %)
795 795  |=(% colspan="3" style="width: 405px;" %)AT+RX1DL
796 796  |(% style="width:155px" %)**Command Example**|(% style="width:128px" %)**Function**|(% style="width:122px" %)**Response**
... ... @@ -805,10 +805,10 @@
805 805  
806 806  Feature: Get or Set the delay between the end of the Tx and the Rx Window 2 in ms
807 807  
808 -{{info}}
809 -**AT Command:AT+RX2DL**
810 -{{/info}}
811 811  
866 +(% style="color:blue" %)**AT Command:AT+RX2DL**
867 +
868 +
812 812  (% border="1" style="background-color:#ffffcc; color:green; width:481.222px" %)
813 813  |=(% colspan="3" style="width: 478px;" %)AT+RX2DL
814 814  |(% style="width:175px" %)**Command Example**|(% style="width:152px" %)**Function**|(% style="width:150px" %)**Response**
... ... @@ -823,10 +823,10 @@
823 823  
824 824  Feature: Get or Set the Rx2 window data rate (0-7 corresponding to DR_X)
825 825  
826 -{{info}}
827 -**AT Command:AT+RX2DR**
828 -{{/info}}
829 829  
884 +(% style="color:blue" %)**AT Command:AT+RX2DR**
885 +
886 +
830 830  (% border="1" style="background-color:#ffffcc; color:green; width:525.222px" %)
831 831  |=(% colspan="3" style="width: 522px;" %)AT+RX2DR
832 832  |(% style="width:160px" %)**Command Example**|(% style="width:232px" %)**Function**|(% style="width:130px" %)**Response**
... ... @@ -841,10 +841,10 @@
841 841  
842 842  Feature: Get or Set the Rx2 window frequency
843 843  
844 -{{info}}
845 -**AT Command:AT+RX2FQ**
846 -{{/info}}
847 847  
902 +(% style="color:blue" %)**AT Command:AT+RX2FQ**
903 +
904 +
848 848  (% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
849 849  |=(% colspan="3" style="width: 584px;" %)AT+RX2FQ
850 850  |(% style="width:183px" %)**Command Example**|(% style="width:240px" %)**Function**|(% style="width:160px" %)**Response**
... ... @@ -859,10 +859,10 @@
859 859  
860 860  Feature: Get or Set the Transmit Power(0-5, MAX:0, MIN:5, according to LoRaWAN Spec, or 40=10dB, 41 = 11dB, …, 50 = 20dB which is out of LoRaWAN spec. )
861 861  
862 -{{info}}
863 -**AT Command:AT+TXP**
864 -{{/info}}
865 865  
920 +(% style="color:blue" %)**AT Command:AT+TXP**
921 +
922 +
866 866  (% border="1" style="background-color:#ffffcc; color:green; width:465.222px" %)
867 867  |=(% colspan="3" style="width: 462px;" %)AT+TXP
868 868  |(% style="width:161px" %)**Command Example**|(% style="width:189px" %)**Function**|(% style="width:112px" %)**Response**
... ... @@ -884,10 +884,10 @@
884 884  
885 885  Feature: Get or Set the Rx2 window frequency
886 886  
887 -{{info}}
888 -**AT Command:AT+RSSI**
889 -{{/info}}
890 890  
945 +(% style="color:blue" %)**AT Command:AT+RSSI**
946 +
947 +
891 891  (% border="1" style="background-color:#ffffcc; color:green; width:557.222px" %)
892 892  |=(% colspan="3" style="width: 554px;" %)AT+RSSI
893 893  |(% style="width:164px" %)**Command Example**|(% style="width:289px" %)**Function**|(% style="width:100px" %)**Response**
... ... @@ -1094,6 +1094,129 @@
1094 1094  * **Example 1**: Downlink Payload: **2101** ~/~/ set packet receiving response level to 1
1095 1095  * **Example 2**: Downlink Payload: **2102** ~/~/ set packet receiving response level to 2
1096 1096  
1154 +== 7.24 Controls NBTrans in unconfirmed uplink mode（LWS007 NBTrans:Set retransmission packets) ==
1155 +
1156 +{{info}}
1157 +**AT Command: AT+SETMAXNBTRANS **
1158 +{{/info}}
1159 +
1160 +(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1161 +|=(% colspan="3" style="width: 533px;" %)AT+**SETMAXNBTRANS**
1162 +|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1163 +|(% style="width:160px" %)**AT+SETMAXNBTRANS=1，0**|(% style="width:263px" %)Value1: set the maximum NBTrans.|(% style="width:109px" %)1(((
1164 +OK
1165 +)))
1166 +|(% style="width:160px" %)**AT+SETMAXNBTRANS=？，1**|(% style="width:263px" %)value2: 0: uplink fcnt doesn't change for each NBTrans; 1: uplink fcnt increase by 1 for each NBTrans.|(% style="width:109px" %)(((
1167 +1
1168 +
1169 +OK
1170 +)))
1171 +
1172 +{{info}}
1173 +**Downlink Command: 0x33**
1174 +{{/info}}
1175 +
1176 +Format: Command Code (0x33) followed by 2 bytes mode value.
1177 +
1178 +If the downlink payload=330100, it means set end node to use confirm mode, while type code is 33.
1179 +
1180 +* Example 1: Downlink Payload: 330100 ~/~/ Set AT+SETMAXNBTRANS=1,0
1181 +* Example 2: Downlink Payload: 330201 ~/~/ Set AT+SETMAXNBTRANS=2,1
1182 +
1183 +== 7.25 Device offline rejoining （LWS007) ==
1184 +
1185 +{{info}}
1186 +**AT Command: AT+DDETECT**
1187 +{{/info}}
1188 +
1189 +(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
1190 +|=(% colspan="3" style="width: 707px;" %)AT+**DDETECT**
1191 +|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
1192 +|(% style="width:160px" %)(((
1193 +AT+DDETECT=1,1440,2880
1194 +
1195 +value1
1196 +)))|(% style="width:198px" %)Enable online detect|(% style="width:349px" %)(((
1197 +1
1198 +
1199 +OK
1200 +)))
1201 +|(% style="width:160px" %)(((
1202 +AT+DDETECT=1,?,2880
1203 +
1204 +value2
1205 +)))|(% style="width:198px" %)Online detection packet sending time|(% style="width:349px" %)(((
1206 +
1207 +
1208 +OK
1209 +)))
1210 +|(% style="width:160px" %)(((
1211 +AT+DDETECT=1,1440,？
1212 +
1213 +value3
1214 +)))|(% style="width:198px" %)Process rejoin|(% style="width:349px" %)(((
1215 +
1216 +
1217 +OK
1218 +)))
1219 +
1220 +{{info}}
1221 +**Downlink Command: 0x33**
1222 +{{/info}}
1223 +
1224 +Format: Command Code (0x32) followed by 2 bytes mode value.
1225 +
1226 +If the downlink payload=320105A00B40, it means set end node to use confirm mode, while type code is 33.
1227 +
1228 +* Example 1: Downlink Payload: 320105A00B40 ~/~/ Set AT+DDETECT=1,1440,2880
1229 +
1230 +== 7.26 Request the server to send an ACK ==
1231 +
1232 +{{info}}
1233 +**AT Command: AT+PNACKMD**
1234 +{{/info}}
1235 +
1236 +(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1237 +|=(% colspan="3" style="width: 533px;" %)**AT+PNACKMD**
1238 +|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1239 +|(% style="width:160px" %)**AT+PNACKMD=1**|(% style="width:263px" %)If the node uploads the ACK as confirm, it will request the server to send an ACK. If the server ack is not received, the node will upload the packets that have not received the ACK the next time it receives the ACK|(% style="width:109px" %)1(((
1240 +OK
1241 +)))
1242 +|(% style="width:160px" %)**AT+PNACKMD=0**|(% style="width:263px" %)off request the server to send an ACK|(% style="width:109px" %)(((
1243 +0
1244 +
1245 +OK
1246 +)))
1247 +
1248 +== 7.27 Adjust network rejoining interval ==
1249 +
1250 +{{info}}
1251 +**AT Command: AT+RJTDC**
1252 +{{/info}}
1253 +
1254 +(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
1255 +|=(% colspan="3" style="width: 724px;" %)AT+RJTDC
1256 +|(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
1257 +|(% style="width:165px" %)AT+RJTDC=?|(% style="width:227px" %)Show the ReJoin data transmission interval in min|(% style="width:329px" %)30000(((
1258 +OK
1259 +
1260 +the interval is 30000ms = 30s
1261 +)))
1262 +|(% style="width:165px" %)AT+RJTDC=60000|(% style="width:227px" %)Set the ReJoin data transmission interval in min|(% style="width:329px" %)OK(((
1263 +Set the ReJoin data transmission interval to 60000ms = 60 seconds
1264 +)))
1265 +
1266 +{{info}}
1267 +**Downlink Command: 0x26**
1268 +{{/info}}
1269 +
1270 +Format: Command Code (0x26) followed by 2 bytes mode value.
1271 +
1272 +If the downlink payload=26000A, it means set end node to use confirm mode, while type code is 26.
1273 +
1274 +* Example 1: Downlink Payload: 26000A ~/~/ Set AT+RJTDC=10
1275 +* Example 2: Downlink Payload: 260002 ~/~/ Set AT+RJTDC=2
1276 +
1097 1097  = 8. AT Commands Combination =
1098 1098  
1099 1099  == 8.1 Set a fix RX2DR for downlink window ==
... ... @@ -1112,3 +1112,4 @@
1112 1112  * AT+ADR=0  [[Reference>>||anchor="H7.1AdaptiveDataRate"]]
1113 1113  * AT+DR=5  [[Reference>>||anchor="H7.4DataRate"]]
1114 1114  * AT+TXP=0  [[Reference>>||anchor="H7.14TransmitPower"]]
1295 +~)~)~)

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0