Last modified by kai on 2024/09/06 10:00
<
From version < 38.21 >
edited by Xiaoling
on 2022/05/31 09:07
To version < 7.8 >
edited by Xiaoling
on 2022/05/11 11:17
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,9 +1,8 @@
1 - **Contents：**
1 +Contens
2 2  
3 3  {{toc/}}
4 4  
5 5  
6 -
7 7  = 1. Introduction =
8 8  
9 9  Dragino LoRaWAN End Node support two types of AT Commands and Downlink Commands:
... ... @@ -11,94 +11,34 @@
11 11  * **Common Commands:** They should be available for each sensor, such as: change uplink interval, reset device.
12 12  * **Sensor Related Commands:** Only for special sensor, such as control relay, poll RS485 device.
13 13  
14 -(((
15 15  **This page shows the common commands since Dragino LoRaWAN stack DR-LWS-005. Make sure the end node support stack higher than DR-LWS-005 before checking this page.**
16 16  
17 -)))
18 18  
19 19  = 2. How to use AT Commands or Downlink command =
20 20  
21 21  * For AT Command , See Devices User Manual for Device. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
22 22  * For LoRaWAN Downlink: The gateway transfer downlink command in HEX format. This page shows the HEX format downlink code for each command. but some servers use base64 as downlink code. Below are reference for how to use downlink command:
23 -** Use HEX format to send a downlink: [[TTN v3>>Notes for TTN]]
24 -** Use Base64 format to send a downlink: [[Chirpstack>>Notes for ChirpStack]]
25 -** See use note for more serves [[Servers Note>>doc:Main.WebHome]](IoT LoRaWAN Server)
20 +** Use HEX format to send a downlink: [[TTN v3>>url:https://wiki.dragino.com/index.php/Notes_for_TTN#Send_Downlink_message]]
21 +** Use Base64 format to send a downlink: [[Chirpstack>>url:https://wiki.dragino.com/index.php/Notes_for_ChirpStack#Downlink]].
22 +** See use note for more serves [[Servers Note>>url:https://wiki.dragino.com/index.php/Main_Page#Use_Note_for_Server]]
26 26  
27 27  = 3. Support End Node and firmware version =
28 28  
29 -(% border="1" style="background-color:#ffffcc; color:green; width:966px" %)
30 -|=(% colspan="3" style="width: 963px;" %)(((
31 -Dragino STM32 base hardware Firmware / LoRaWAN stack list
32 -)))
33 -|(% style="width:187px" %)(((
34 -**Model**
35 -)))|(% style="width:330px" %)(((
36 -**Description**
37 -)))|(% style="width:445px" %)(((
38 -**Firmware Version <~-~-> Stack Version**
39 -)))
40 -|(% style="width:187px" %)(((
41 -[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],
42 -)))|(% style="width:330px" %)(((
43 -Open Source Generic LoRaWAN Sensor Node
44 -)))|(% style="width:445px" %)(((
45 -(((
46 -LSN50 v1.6.0 <~-~-> DR-LWS-003;
47 -)))
48 -
49 -(((
50 -(((
26 +(% style="background-color:#ffffcc; color:green; width:995.222px" %)
27 +|=(% colspan="3" style="width: 992px;" %)Dragino STM32 base hardware Firmware / LoRaWAN stack list
28 +|(% style="width:187px" %)**Model**|(% style="width:349px" %)**Description**|(% style="width:453px" %)**Firmware Version <~-~-> Stack Version**
29 +|(% style="width:187px" %)[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],|(% style="width:349px" %)Open Source Generic LoRaWAN Sensor Node|(% style="width:453px" %)LSN50 v1.6.0 <~-~-> DR-LWS-003;(((
51 51  LSN50 v1.7.0 <~-~-> DR-LWS-005; ~-~-> Support since this version
52 52  )))
53 -)))
54 -)))
55 -|(% style="width:187px" %)(((
56 -[[LGT92>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/142-lgt-92.html]],
57 -)))|(% style="width:330px" %)(((
58 -LoRaWAN GPS Tracker
59 -)))|(% style="width:445px" %)(((
60 -(((
61 -LGT92 v1.6.3 <~-~-> DR-LWS-003;
62 -)))
63 -
64 -(((
65 -(((
32 +|(% style="width:187px" %)[[LGT92>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/142-lgt-92.html]],|(% style="width:349px" %)LoRaWAN GPS Tracker|(% style="width:453px" %)LGT92 v1.6.3 <~-~-> DR-LWS-003;(((
66 66  LGT92 v1.6.4 <~-~-> DR-LWS-005;~-~-> Support since this version
67 67  )))
68 -)))
69 -)))
70 -|(% style="width:187px" %)(((
71 -[[LBT1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/165-lbt1.html]],
72 -)))|(% style="width:330px" %)(((
73 -LoRaWAN BLE Indoor Tracker
74 -)))|(% style="width:445px" %)(((
75 -LBT1 v1.0 <~-~-> DR-LWS-005;
76 -)))
77 -|(% style="width:187px" %)(((
78 -[[RS485-LN>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/154-rs485-ln.html]],
79 -)))|(% style="width:330px" %)(((
80 -LoRaWAN RS485 Modbus Converter
81 -)))|(% style="width:445px" %)(((
82 -RS485-LN v1.3 <~-~-> DR-LWS-005;
83 -)))
84 -|(% style="width:187px" %)(((
85 -[[LHT65>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/151-lht65.html]],
86 -)))|(% style="width:330px" %)(((
87 -LoRaWAN Temperature & Humidity Sensor
88 -)))|(% style="width:445px" %)(((
89 -(((
90 -LHT65 v1.7 <~-~-> DR-LWS-003;
91 -)))
92 -
93 -(((
94 -(((
35 +|(% style="width:187px" %)[[LBT1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/165-lbt1.html]],|(% style="width:349px" %)LoRaWAN BLE Indoor Tracker|(% style="width:453px" %)LBT1 v1.0 <~-~-> DR-LWS-005;
36 +|(% style="width:187px" %)[[RS485-LN>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/154-rs485-ln.html]],|(% style="width:349px" %)LoRaWAN RS485 Modbus Converter|(% style="width:453px" %)RS485-LN v1.3 <~-~-> DR-LWS-005;
37 +|(% style="width:187px" %)[[LHT65>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/151-lht65.html]],|(% style="width:349px" %)LoRaWAN Temperature & Humidity Sensor|(% style="width:453px" %)LHT65 v1.7 <~-~-> DR-LWS-003;(((
95 95  LHT65 v1.8.0 <~-~-> DR-LWS-005;~-~-> Support since this version
96 96  )))
97 -)))
98 -)))
99 99  
100 -
101 -
102 102  = 4. System Management Commands =
103 103  
104 104  == 4.1 Change Uplink Interval ==
... ... @@ -110,7 +110,7 @@
110 110  **AT Command: AT+TDC**
111 111  )))
112 112  
113 -(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
52 +(% style="background-color:#ffffcc; color:green; width:727.222px" %)
114 114  |=(% colspan="3" style="width: 724px;" %)AT+TDC
115 115  |(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
116 116  |(% style="width:165px" %)AT+TDC=?|(% style="width:227px" %)Show current transmit Interval|(% style="width:329px" %)30000(((
... ... @@ -126,13 +126,9 @@
126 126  **Downlink Command: 0x01**
127 127  {{/info}}
128 128  
129 -(((
130 130  Format: Command Code (0x01) followed by 3 bytes time value.
131 -)))
132 132  
133 -(((
134 134  If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
135 -)))
136 136  
137 137  * **Example 1**: Downlink Payload:** 0100001E** ~/~/ Set Transmit Interval (TDC) = 30 seconds
138 138  * **Example 2**: Downlink Payload:** 0100003C** ~/~/ Set Transmit Interval (TDC) = 60 seconds
... ... @@ -145,7 +145,7 @@
145 145  **AT Command: ATZ**
146 146  {{/info}}
147 147  
148 -(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
83 +(% border="0" style="background-color:#ffffcc; color:green; width:727.222px" %)
149 149  |=(% colspan="3" %)ATZ: Trig a reset of the MCU
150 150  |**Command Example**|**Function**|**Response**
151 151  |ATZ|Reset MCU|(((
... ... @@ -166,16 +166,10 @@
166 166  **Downlink Command: 0x04**
167 167  {{/info}}
168 168  
169 -(((
170 170  Format: Command Code (0x04) followed by FF.
171 -)))
172 172  
173 -(((
174 174  If the downlink payload=**04FF**, the end node will reboot.
175 175  
176 -
177 -)))
178 -
179 179  == 4.3 Reset to factory Default ==
180 180  
181 181  Feature: Reset the parameters to Factory Default, factory default value depends on the firmware settings, the OTAA and ABP keys will reserve after this command.
... ... @@ -184,7 +184,7 @@
184 184  **AT Command: AT+FDR**
185 185  {{/info}}
186 186  
187 -(% border="1" style="background-color:#ffffcc; color:green; width:831.222px" %)
116 +(% style="background-color:#ffffcc; color:green; width:831.222px" %)
188 188  |=(% colspan="3" style="width: 828px;" %)Reset to factory default
189 189  |(% style="width:181px" %)**Command Example**|(% style="width:181px" %)**Function**|(% style="width:465px" %)**Response**
190 190  |(% style="width:181px" %)AT+FDR|(% style="width:181px" %)Reset to factory default|(% style="width:465px" %)(((
... ... @@ -205,13 +205,9 @@
205 205  **Downlink Command: 0x04**
206 206  {{/info}}
207 207  
208 -(((
209 209  Format: Command Code (0x04) followed by FE.
210 -)))
211 211  
212 -(((
213 213  If the downlink payload=**04FE**, Reset Parameters to Factory Default, Keys Reserve.
214 -)))
215 215  
216 216  
217 217  == 4.4 Show Firmware Version ==
... ... @@ -222,10 +222,10 @@
222 222  **AT Command: AT+VER**
223 223  {{/info}}
224 224  
225 -(% border="1" style="background-color:#ffffcc; color:green; width:586px" %)
226 -|=(% colspan="3" style="width: 583px;" %)AT+VER: Image Version and Frequency Band
227 -|(% style="width:170px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:113px" %)**Response**
228 -|(% style="width:170px" %)AT+VER=?|(% style="width:300px" %)Show Image version and Frequency Band|(% style="width:113px" %)(((
150 +(% style="background-color:#ffffcc; color:green" %)
151 +|=(% colspan="3" %)AT+VER: Image Version and Frequency Band
152 +|**Command Example**|**Function**|**Response**
153 +|AT+VER=?|Show Image version and Frequency Band|(((
229 229  1.3 EU868
230 230  
231 231  OK
... ... @@ -235,25 +235,17 @@
235 235  **Downlink Command: 0x26 (Valid in 006 stack)**
236 236  {{/info}}
237 237  
238 -(((
239 239  Downlink Format: 0x26
240 -)))
241 241  
242 -(((
243 243  Device will reply with firmware version info, device info. frequency band info. detail please check device user manual. Total 5 bytes Example: If device is of firmware version 1.1.0 Upload: xx ~-~- yy ~-~- zz ~-~- 110 total 5 bytes
244 -)))
245 245  
246 -(((
247 247  **xx: Software Type:**
248 -)))
249 249  
250 250  * 0x00 01: LGT92 Version
251 251  * 0x00 02: LBT1
252 252  * 0x00 03: LSE01/LDDS75/LDDS20/LSPH01/LLMS01/LSNPK01
253 253  
254 -(((
255 255  **yy: Frequency Band:**
256 -)))
257 257  
258 258  * 0x01: EU868
259 259  * 0x02: US915
... ... @@ -266,9 +266,7 @@
266 266  * 0x09: AS923-2
267 267  * 0xa0: AS923-3
268 268  
269 -(((
270 270  **zz: Subband**
271 -)))
272 272  
273 273  firmware version: v1.1.0 ~-~-> 110
274 274  
... ... @@ -281,7 +281,7 @@
281 281  **AT Command: AT+CFG**
282 282  {{/info}}
283 283  
284 -(% border="1" style="background-color:#ffffcc; color:green; width:599.222px" %)
199 +(% style="background-color:#ffffcc; color:green; width:599.222px" %)
285 285  |=(% colspan="3" style="width: 596px;" %)AT+CFG: Print all configurations
286 286  |(% style="width:160px" %)**Command Example**|(% style="width:154px" %)**Function**|(% style="width:280px" %)**Response**
287 287  |(% style="width:160px" %)AT+CFG|(% style="width:154px" %)Show all configures|(% style="width:280px" %)(((
... ... @@ -308,7 +308,7 @@
308 308  **AT Command: AT+APPEUI**
309 309  {{/info}}
310 310  
311 -(% border="1" style="background-color:#ffffcc; color:green; width:686.222px" %)
226 +(% style="background-color:#ffffcc; color:green; width:686.222px" %)
312 312  |=(% colspan="3" style="width: 683px;" %)AT+APPEUI
313 313  |(% style="width:305px" %)**Command Example**|(% style="width:186px" %)**Function**|(% style="width:191px" %)**Response**
314 314  |(% style="width:305px" %)AT+APPEUI=?|(% style="width:186px" %)Get the Application EUI|(% style="width:191px" %)00 b3 d5 00 00 00 00 00(((
... ... @@ -324,7 +324,7 @@
324 324  **AT Command: AT+APPKEY**
325 325  {{/info}}
326 326  
327 -(% border="1" style="background-color:#ffffcc; color:green; width:976.222px" %)
242 +(% style="background-color:#ffffcc; color:green; width:976.222px" %)
328 328  |=(% colspan="3" style="width: 973px;" %)AT+APPKEY
329 329  |(% style="width:441px" %)**Command Example**|(% style="width:180px" %)**Function**|(% style="width:350px" %)**Response**
330 330  |(% style="width:441px" %)AT+APPKEY=?|(% style="width:180px" %)Get the Application Key|(% style="width:350px" %)00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35(((
... ... @@ -340,7 +340,7 @@
340 340  **AT Command: AT+APPSKEY**
341 341  {{/info}}
342 342  
343 -(% border="1" style="background-color:#ffffcc; color:green; width:1040.22px" %)
258 +(% style="background-color:#ffffcc; color:green; width:1040.22px" %)
344 344  |=(% colspan="3" style="width: 1037px;" %)AT+APPSKEY
345 345  |(% style="width:451px" %)**Command Example**|(% style="width:231px" %)**Function**|(% style="width:354px" %)**Response**
346 346  |(% style="width:451px" %)AT+APPSKEY=?|(% style="width:231px" %)Get the Application Session Key|(% style="width:354px" %)00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2(((
... ... @@ -358,7 +358,7 @@
358 358  **AT Command: AT+DADDR**
359 359  {{/info}}
360 360  
361 -(% border="1" style="background-color:#ffffcc; color:green; width:795.222px" %)
276 +(% style="background-color:#ffffcc; color:green; width:795.222px" %)
362 362  |=(% colspan="3" style="width: 792px;" %)AT+DADDR
363 363  |(% style="width:192px" %)**Command Example**|(% style="width:241px" %)**Function**|(% style="width:359px" %)**Response**
364 364  |(% style="width:192px" %)AT+DADDR=?|(% style="width:241px" %)Get the Application Session Key.|(% style="width:359px" %)(While Error in format, return AT_PARAM_ERROR)(((
... ... @@ -376,7 +376,7 @@
376 376  **AT Command: AT+DEUI**
377 377  {{/info}}
378 378  
379 -(% border="1" style="background-color:#ffffcc; color:green; width:1035.22px" %)
294 +(% style="background-color:#ffffcc; color:green; width:1035.22px" %)
380 380  |=(% colspan="3" style="width: 1032px;" %)AT+DEUI
381 381  |(% style="width:250px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:634px" %)**Response**
382 382  |(% style="width:250px" %)AT+DEUI=?|(% style="width:147px" %)Get the Device EUI.|(% style="width:634px" %)00 44 34 22 33 45 55 55(((
... ... @@ -394,7 +394,7 @@
394 394  **AT Command: AT+NWKID**
395 395  {{/info}}
396 396  
397 -(% border="1" style="background-color:#ffffcc; color:green; width:448.222px" %)
312 +(% style="background-color:#ffffcc; color:green; width:448.222px" %)
398 398  |=(% colspan="3" style="width: 445px;" %)AT+NWKID
399 399  |(% style="width:191px" %)**Command Example**|(% style="width:153px" %)**Function**|(% style="width:101px" %)**Response**
400 400  |(% style="width:191px" %)AT+NWKID=?|(% style="width:153px" %)Get the Network ID.|(% style="width:101px" %)a8 40 41 ff(((
... ... @@ -410,7 +410,7 @@
410 410  **AT Command: AT+NWKSKEY**
411 411  {{/info}}
412 412  
413 -(% border="1" style="background-color:#ffffcc; color:green; width:1017.22px" %)
328 +(% style="background-color:#ffffcc; color:green; width:1017.22px" %)
414 414  |=(% colspan="3" style="width: 1014px;" %)AT+NWKSKEY
415 415  |(% style="width:455px" %)**Command Example**|(% style="width:215px" %)**Function**|(% style="width:343px" %)**Response**
416 416  |(% style="width:455px" %)AT+NWKSKEY=?|(% style="width:215px" %)Get the Network Session Key.|(% style="width:343px" %)00 4f 19 25 52 ce 97 09 d7 fa 84 71 db 51 02 92(((
... ... @@ -428,7 +428,7 @@
428 428  **AT Command: AT+CFM**
429 429  {{/info}}
430 430  
431 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
346 +(% style="background-color:#ffffcc; color:green; width:710.222px" %)
432 432  |=(% colspan="3" style="width: 707px;" %)AT+CFM
433 433  |(% style="width:155px" %)**Command Example**|(% style="width:205px" %)**Function**|(% style="width:346px" %)**Response**
434 434  |(% style="width:155px" %)AT+CFM=?|(% style="width:205px" %)Get the confirmation mode|(% style="width:346px" %)0(((
... ... @@ -454,7 +454,7 @@
454 454  **AT Command: AT+CFS**
455 455  {{/info}}
456 456  
457 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
372 +(% style="background-color:#ffffcc; color:green; width:534.222px" %)
458 458  |=(% colspan="3" style="width: 531px;" %)AT+CFS
459 459  |(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:178px" %)**Response**
460 460  |(% style="width:156px" %)AT+CFS=?|(% style="width:193px" %)Get confirmation status|(% style="width:178px" %)0(((
... ... @@ -469,7 +469,7 @@
469 469  **AT Command: AT+JOIN**
470 470  {{/info}}
471 471  
472 -(% border="1" style="background-color:#ffffcc; color:green; width:647.222px" %)
387 +(% style="background-color:#ffffcc; color:green; width:647.222px" %)
473 473  |=(% colspan="3" style="width: 644px;" %)AT+JOIN
474 474  |(% style="width:163px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:334px" %)**Response**
475 475  |(% style="width:163px" %)AT+JOIN ?|(% style="width:147px" %)Get imformation.|(% style="width:334px" %)AT+JOIN: Join network(((
... ... @@ -486,7 +486,7 @@
486 486  **AT Command: AT+NJM**
487 487  {{/info}}
488 488  
489 -(% border="1" style="background-color:#ffffcc; color:green; width:753.222px" %)
404 +(% style="background-color:#ffffcc; color:green; width:753.222px" %)
490 490  |=(% colspan="3" style="width: 750px;" %)AT+NJM
491 491  |(% style="width:162px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:361px" %)**Response**
492 492  |(% style="width:162px" %)AT+NJM=?|(% style="width:227px" %)Get the Network Join Mode|(% style="width:361px" %)1(((
... ... @@ -514,7 +514,7 @@
514 514  **AT Command: AT+NJS**
515 515  {{/info}}
516 516  
517 -(% border="1" style="background-color:#ffffcc; color:green; width:498.222px" %)
432 +(% style="background-color:#ffffcc; color:green; width:498.222px" %)
518 518  |=(% colspan="3" style="width: 495px;" %)AT+NJS
519 519  |(% style="width:169px" %)**Command Example**|(% style="width:164px" %)**Function**|(% style="width:161px" %)**Response**
520 520  |(% style="width:169px" %)AT+NJS=?|(% style="width:164px" %)Get the join status.|(% style="width:161px" %)0(((
... ... @@ -529,7 +529,7 @@
529 529  **AT Command: AT+RECV**
530 530  {{/info}}
531 531  
532 -(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
447 +(% style="background-color:#ffffcc; color:green; width:587.222px" %)
533 533  |=(% colspan="3" style="width: 584px;" %)AT+RECV
534 534  |(% style="width:161px" %)**Command Example**|(% style="width:272px" %)**Function**|(% style="width:150px" %)**Response**
535 535  |(% style="width:161px" %)AT+RECV=?|(% style="width:272px" %)print last received data in raw format.|(% style="width:150px" %)0:(((
... ... @@ -544,7 +544,7 @@
544 544  **AT Command: AT+RECVB**
545 545  {{/info}}
546 546  
547 -(% border="1" style="background-color:#ffffcc; color:green; width:793.222px" %)
462 +(% style="background-color:#ffffcc; color:green; width:793.222px" %)
548 548  |=(% colspan="3" style="width: 790px;" %)AT+RECVB
549 549  |(% style="width:173px" %)**Command Example**|(% style="width:497px" %)**Function**|(% style="width:120px" %)**Response**
550 550  |(% style="width:173px" %)AT+RECVB=?|(% style="width:497px" %)print last received data in binary format (with hexadecimal values).|(% style="width:120px" %)2: 0010(((
... ... @@ -559,7 +559,7 @@
559 559  **AT Command: AT+SEND**
560 560  {{/info}}
561 561  
562 -(% border="1" style="background-color:#ffffcc; color:green; width:991.222px" %)
477 +(% style="background-color:#ffffcc; color:green; width:991.222px" %)
563 563  |=(% colspan="3" style="width: 988px;" %)AT+SEND
564 564  |(% style="width:201px" %)**Command Example**|(% style="width:340px" %)**Function**|(% style="width:446px" %)**Response**
565 565  |(% style="width:201px" %)AT+SEND=12:hello world|(% style="width:340px" %)Send text data along with the application port.|(% style="width:446px" %)OK(((
... ... @@ -578,7 +578,7 @@
578 578  **AT Command: AT+SENDB**
579 579  {{/info}}
580 580  
581 -(% border="1" style="background-color:#ffffcc; color:green; width:1120.22px" %)
496 +(% style="background-color:#ffffcc; color:green; width:1120.22px" %)
582 582  |=(% colspan="3" style="width: 1117px;" %)AT+SENDB
583 583  |(% style="width:257px" %)**Command Example**|(% style="width:406px" %)**Function**|(% style="width:453px" %)**Response**
584 584  |(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)OK
... ... @@ -598,7 +598,7 @@
598 598  **AT Command: AT+ADR**
599 599  {{/info}}
600 600  
601 -(% border="1" style="background-color:#ffffcc; color:green; width:683.222px" %)
516 +(% style="background-color:#ffffcc; color:green; width:683.222px" %)
602 602  |=(% colspan="3" style="width: 680px;" %)AT+ADR
603 603  |(% style="width:162px" %)**Command Example**|(% style="width:266px" %)**Function**|(% style="width:250px" %)**Response**
604 604  |(% style="width:162px" %)AT+ADR=?|(% style="width:266px" %)Get the Adaptive Data Rate setting.|(% style="width:250px" %)1(((
... ... @@ -627,7 +627,7 @@
627 627  **AT Command:AT+CLASS**
628 628  {{/info}}
629 629  
630 -(% border="1" style="background-color:#ffffcc; color:green; width:507.222px" %)
545 +(% style="background-color:#ffffcc; color:green; width:507.222px" %)
631 631  |=(% colspan="3" style="width: 504px;" %)AT+CLASS
632 632  |(% style="width:163px" %)**Command Example**|(% style="width:166px" %)**Function**|(% style="width:175px" %)**Response**
633 633  |(% style="width:163px" %)AT+CLASS=?|(% style="width:166px" %)Get the Device Class.|(% style="width:175px" %)A(((
... ... @@ -645,7 +645,7 @@
645 645  **AT Command:AT+DCS**
646 646  {{/info}}
647 647  
648 -(% border="1" style="background-color:#ffffcc; color:green; width:515.222px" %)
563 +(% style="background-color:#ffffcc; color:green; width:515.222px" %)
649 649  |=(% colspan="3" style="width: 512px;" %)AT+DCS
650 650  |(% style="width:165px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:107px" %)**Response**
651 651  |(% style="width:165px" %)AT+DCS=?|(% style="width:239px" %)Get the ETSI Duty Cycle setting.|(% style="width:107px" %)1(((
... ... @@ -663,7 +663,7 @@
663 663  **AT Command: AT+DR**
664 664  {{/info}}
665 665  
666 -(% border="1" style="background-color:#ffffcc; color:green; width:466.222px" %)
581 +(% style="background-color:#ffffcc; color:green; width:466.222px" %)
667 667  |=(% colspan="3" style="width: 463px;" %)AT+DR
668 668  |(% style="width:156px" %)**Command Example**|(% style="width:167px" %)**Function**|(% style="width:140px" %)**Response**
669 669  |(% style="width:156px" %)AT+DR=?|(% style="width:167px" %)Get the Data Rate.|(% style="width:140px" %)5(((
... ... @@ -691,7 +691,7 @@
691 691  **AT Command:AT+FCD**
692 692  {{/info}}
693 693  
694 -(% border="1" style="background-color:#ffffcc; color:green; width:693.222px" %)
609 +(% style="background-color:#ffffcc; color:green; width:693.222px" %)
695 695  |=(% colspan="3" style="width: 690px;" %)AT+FCD
696 696  |(% style="width:162px" %)**Command Example**|(% style="width:258px" %)**Function**|(% style="width:269px" %)**Response**
697 697  |(% style="width:162px" %)AT+FCD=?|(% style="width:258px" %)Get the Frame Counter Downlink.|(% style="width:269px" %)0(((
... ... @@ -711,7 +711,7 @@
711 711  **AT Command:AT+FCU**
712 712  {{/info}}
713 713  
714 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
629 +(% style="background-color:#ffffcc; color:green; width:534.222px" %)
715 715  |=(% colspan="3" style="width: 531px;" %)AT+FCU
716 716  |(% style="width:177px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:113px" %)**Response**
717 717  |(% style="width:177px" %)AT+FCU=?|(% style="width:239px" %)Get the Frame Counter Uplink.|(% style="width:113px" %)0(((
... ... @@ -729,7 +729,7 @@
729 729  **AT Command:AT+JN1DL**
730 730  {{/info}}
731 731  
732 -(% border="1" style="background-color:#ffffcc; color:green; width:537.222px" %)
647 +(% style="background-color:#ffffcc; color:green; width:537.222px" %)
733 733  |=(% colspan="3" style="width: 534px;" %)AT+JN1DL
734 734  |(% style="width:164px" %)**Command Example**|(% style="width:229px" %)**Function**|(% style="width:140px" %)**Response**
735 735  |(% style="width:164px" %)AT+JN1DL=?|(% style="width:229px" %)Get the Join Accept Delay.|(% style="width:140px" %)5000(((
... ... @@ -747,7 +747,7 @@
747 747  **AT Command:AT+JN2DL**
748 748  {{/info}}
749 749  
750 -(% border="1" style="background-color:#ffffcc; color:green; width:538.222px" %)
665 +(% style="background-color:#ffffcc; color:green; width:538.222px" %)
751 751  |=(% colspan="3" style="width: 535px;" %)AT+JN2DL
752 752  |(% style="width:160px" %)**Command Example**|(% style="width:228px" %)**Function**|(% style="width:146px" %)**Response**
753 753  |(% style="width:160px" %)AT+JN2DL=?|(% style="width:228px" %)Get the Join Accept Delay.|(% style="width:146px" %)6000(((
... ... @@ -765,7 +765,7 @@
765 765  **AT Command:AT+PNM**
766 766  {{/info}}
767 767  
768 -(% border="1" style="background-color:#ffffcc; color:green; width:667.222px" %)
683 +(% style="background-color:#ffffcc; color:green; width:667.222px" %)
769 769  |=(% colspan="3" style="width: 664px;" %)AT+PNM
770 770  |(% style="width:166px" %)**Command Example**|(% style="width:225px" %)**Function**|(% style="width:272px" %)**Response**
771 771  |(% style="width:166px" %)AT+PNM=?|(% style="width:225px" %)Get the public network mode.|(% style="width:272px" %)1(((
... ... @@ -785,7 +785,7 @@
785 785  **AT Command:AT+RX1DL**
786 786  {{/info}}
787 787  
788 -(% border="1" style="background-color:#ffffcc; color:green; width:408.222px" %)
703 +(% style="background-color:#ffffcc; color:green; width:408.222px" %)
789 789  |=(% colspan="3" style="width: 405px;" %)AT+RX1DL
790 790  |(% style="width:155px" %)**Command Example**|(% style="width:128px" %)**Function**|(% style="width:122px" %)**Response**
791 791  |(% style="width:155px" %)AT+RX1DL=?|(% style="width:128px" %)Get the delay.|(% style="width:122px" %)1000(((
... ... @@ -795,21 +795,18 @@
795 795  
796 796  )))
797 797  
798 -== 7.11 Receive Delay2 ==
713 +== 7.11Receive Delay2 ==
799 799  
800 800  Feature: Get or Set the delay between the end of the Tx and the Rx Window 2 in ms
801 801  
802 -{{info}}
803 -**AT Command:AT+RX2DL**
804 -{{/info}}
717 +AT Command:AT+RX2DL
805 805  
806 -(% border="1" style="background-color:#ffffcc; color:green; width:481.222px" %)
807 -|=(% colspan="3" style="width: 478px;" %)AT+RX2DL
808 -|(% style="width:175px" %)**Command Example**|(% style="width:152px" %)**Function**|(% style="width:150px" %)**Response**
809 -|(% style="width:175px" %)AT+RX2DL=?|(% style="width:152px" %)Get the delay.|(% style="width:150px" %)2000(((
719 +|=(% colspan="3" %)AT+RX2DL
720 +|**Command Example**|**Function**|**Response**
721 +|AT+RX2DL=?|Get the delay.|2000(((
810 810  OK
811 811  )))
812 -|(% style="width:175px" %)AT+RX2DL=2500|(% style="width:152px" %)Set the delay.|(% style="width:150px" %)OK(((
724 +|AT+RX2DL=2500|Set the delay.|OK(((
813 813  
814 814  )))
815 815  
... ... @@ -817,17 +817,14 @@
817 817  
818 818  Feature: Get or Set the Rx2 window data rate (0-7 corresponding to DR_X)
819 819  
820 -{{info}}
821 -**AT Command:AT+RX2DR**
822 -{{/info}}
732 +AT Command:AT+RX2DR
823 823  
824 -(% border="1" style="background-color:#ffffcc; color:green; width:525.222px" %)
825 -|=(% colspan="3" style="width: 522px;" %)AT+RX2DR
826 -|(% style="width:160px" %)**Command Example**|(% style="width:232px" %)**Function**|(% style="width:130px" %)**Response**
827 -|(% style="width:160px" %)AT+RX2DR=?|(% style="width:232px" %)Get the Rx2 window data rate.|(% style="width:130px" %)2(((
734 +|=(% colspan="3" %)AT+RX2DR
735 +|**Command Example**|**Function**|**Response**
736 +|AT+RX2DR=?|Get the Rx2 window data rate.|2(((
828 828  OK
829 829  )))
830 -|(% style="width:160px" %)AT+RX2DR=6|(% style="width:232px" %)Set the Rx2 window data rate.|(% style="width:130px" %)OK(((
739 +|AT+RX2DR=6|Set the Rx2 window data rate.|OK(((
831 831  
832 832  )))
833 833  
... ... @@ -835,17 +835,14 @@
835 835  
836 836  Feature: Get or Set the Rx2 window frequency
837 837  
838 -{{info}}
839 -**AT Command:AT+RX2FQ**
840 -{{/info}}
747 +AT Command:AT+RX2FQ
841 841  
842 -(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
843 -|=(% colspan="3" style="width: 584px;" %)AT+RX2FQ
844 -|(% style="width:183px" %)**Command Example**|(% style="width:240px" %)**Function**|(% style="width:160px" %)**Response**
845 -|(% style="width:183px" %)AT+RX2FQ=?|(% style="width:240px" %)Get the Rx2 window frequency.|(% style="width:160px" %)434665000(((
749 +|=(% colspan="3" %)AT+RX2FQ
750 +|**Command Example**|**Function**|**Response**
751 +|AT+RX2FQ=?|Get the Rx2 window frequency.|434665000(((
846 846  OK
847 847  )))
848 -|(% style="width:183px" %)AT+RX2FQ=434665000|(% style="width:240px" %)Set the Rx2 window frequency.|(% style="width:160px" %)OK(((
754 +|AT+RX2FQ=434665000|Set the Rx2 window frequency.|OK(((
849 849  
850 850  )))
851 851  
... ... @@ -853,17 +853,14 @@
853 853  
854 854  Feature: Get or Set the Transmit Power(0-5, MAX:0, MIN:5, according to LoRaWAN Spec, or 40=10dB, 41 = 11dB, …, 50 = 20dB which is out of LoRaWAN spec. )
855 855  
856 -{{info}}
857 -**AT Command:AT+TXP**
858 -{{/info}}
762 +AT Command:AT+TXP
859 859  
860 -(% border="1" style="background-color:#ffffcc; color:green; width:465.222px" %)
861 -|=(% colspan="3" style="width: 462px;" %)AT+TXP
862 -|(% style="width:161px" %)**Command Example**|(% style="width:189px" %)**Function**|(% style="width:112px" %)**Response**
863 -|(% style="width:161px" %)AT+TXP=?|(% style="width:189px" %)Get the Transmit Power.|(% style="width:112px" %)0(((
764 +|=(% colspan="3" %)AT+TXP
765 +|**Command Example**|**Function**|**Response**
766 +|AT+TXP=?|Get the Transmit Power.|0(((
864 864  OK
865 865  )))
866 -|(% style="width:161px" %)AT+TXP=1|(% style="width:189px" %)Set the Transmit Power.|(% style="width:112px" %)OK(((
769 +|AT+TXP=1|Set the Transmit Power.|OK(((
867 867  
868 868  )))
869 869  
... ... @@ -871,21 +871,18 @@
871 871  
872 872  If the downlink payload=22000100, it means setting the TXP to 0.
873 873  
874 -* **Example 1**: Downlink Payload: **22000102** ~/~/ Set AT+TXP=2.
875 -* **Example 2**: Downlink Payload: **220000FF** ~/~/ Set AT+TXP=0.
777 +* Example 1: Downlink Payload: 22000102 ~/~/ Set AT+TXP=2.
778 +* Example 2: Downlink Payload: 220000FF ~/~/ Set AT+TXP=0.
876 876  
877 877  == 7.15 RSSI of the Last Received Packet ==
878 878  
879 879  Feature: Get or Set the Rx2 window frequency
880 880  
881 -{{info}}
882 -**AT Command:AT+RSSI**
883 -{{/info}}
784 +AT Command:AT+RSSI
884 884  
885 -(% border="1" style="background-color:#ffffcc; color:green; width:557.222px" %)
886 -|=(% colspan="3" style="width: 554px;" %)AT+RSSI
887 -|(% style="width:164px" %)**Command Example**|(% style="width:289px" %)**Function**|(% style="width:100px" %)**Response**
888 -|(% style="width:164px" %)AT+RSSI=?|(% style="width:289px" %)Get the RSSI of the last received packet.|(% style="width:100px" %)0(((
786 +|=(% colspan="3" %)AT+RSSI
787 +|**Command Example**|**Function**|**Response**
788 +|AT+RSSI=?|Get the RSSI of the last received packet.|0(((
889 889  OK
890 890  )))
891 891  
... ... @@ -893,14 +893,11 @@
893 893  
894 894  Feature: Get the SNR of the last received packet
895 895  
896 -{{info}}
897 -**AT Command:AT+SNR**
898 -{{/info}}
796 +AT Command:AT+SNR
899 899  
900 -(% border="1" style="background-color:#ffffcc; color:green; width:571.222px" %)
901 -|=(% colspan="3" style="width: 568px;" %)AT+SNR
902 -|(% style="width:164px" %)**Command Example**|(% style="width:290px" %)**Function**|(% style="width:113px" %)**Response**
903 -|(% style="width:164px" %)AT+SNR=?|(% style="width:290px" %)Get the RSSI of the last received packet.|(% style="width:113px" %)0(((
798 +|=(% colspan="3" %)AT+SNR
799 +|**Command Example**|**Function**|**Response**
800 +|AT+SNR=?|Get the RSSI of the last received packet.|0(((
904 904  OK
905 905  )))
906 906  
... ... @@ -908,144 +908,114 @@
908 908  
909 909  Feature: Get or set the application port.
910 910  
911 -{{info}}
912 -**AT Command: AT+PORT**
913 -{{/info}}
808 +AT Command: AT+PORT
914 914  
915 -(% border="1" style="background-color:#ffffcc; color:green; width:500.222px" %)
916 -|=(% colspan="3" style="width: 497px;" %)AT+PORT
917 -|(% style="width:157px" %)**Command Example**|(% style="width:204px" %)**Function**|(% style="width:135px" %)**Response**
918 -|(% style="width:157px" %)AT+PORT=?|(% style="width:204px" %)Get the application port|(% style="width:135px" %)21(((
810 +|=(% colspan="3" %)AT+PORT
811 +|**Command Example**|**Function**|**Response**
812 +|AT+PORT=?|Get the application port|21(((
919 919  OK
920 920  )))
921 -|(% style="width:157px" %)AT+PORT=21|(% style="width:204px" %)Set the application port|(% style="width:135px" %)OK
815 +|AT+PORT=21|Set the application port|OK
922 922  
923 -{{info}}
924 -**Downlink Command: 0x23**
925 -{{/info}}
817 +Downlink Command: 0x23
926 926  
927 927  Format: Command Code (0x23) followed by 1 bytes port value.
928 928  
929 929  If the downlink payload=2301, it means set the application port to 1, while type code is 23.
930 930  
931 -* **Example 1**: Downlink Payload: **2301** ~/~/ set the application port to 1
932 -* **Example 2**: Downlink Payload:** 2305** ~/~/ set the application port to 5
823 +* Example 1: Downlink Payload: 2301 ~/~/ set the application port to 1
824 +* Example 2: Downlink Payload: 2305 ~/~/ set the application port to 5
933 933  
934 934  == 7.18 Single Channel Mode ==
935 935  
936 936  Feature:Get or Set Frequency (Unit: Hz) for Single Channel Mode.
937 937  
938 -{{info}}
939 -**AT Command: AT+CHS**
940 -{{/info}}
830 +AT Command: AT+CHS
941 941  
942 -(% border="1" style="background-color:#ffffcc; color:green; width:603.222px" %)
943 -|=(% colspan="3" style="width: 600px;" %)AT+CHS
944 -|(% style="width:182px" %)**Command Example**|(% style="width:295px" %)**Function**|(% style="width:122px" %)**Response**
945 -|(% style="width:182px" %)AT+CHS=?|(% style="width:295px" %)Get Frequency for Single Channel Mode|(% style="width:122px" %)0(((
832 +|=(% colspan="3" %)AT+CHS
833 +|**Command Example**|**Function**|**Response**
834 +|AT+CHS=?|Get Frequency for Single Channel Mode|0(((
946 946  OK
947 947  )))
948 -|(% style="width:182px" %)AT+CHS=868100000|(% style="width:295px" %)Set Frequency for Single Channel Mode|(% style="width:122px" %)OK
837 +|AT+CHS=868100000|Set Frequency for Single Channel Mode|OK
949 949  
950 950  == 7.19 Eight Channel Mode ==
951 951  
952 952  Feature: Get or Set eight channels mode,Only for US915,AU915,CN470.
953 953  
954 -{{info}}
955 -**AT Command: AT+CHE**
956 -{{/info}}
843 +AT Command: AT+CHE
957 957  
958 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
959 -|=(% colspan="3" style="width: 707px;" %)AT+CHE
960 -|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
961 -|(% style="width:160px" %)AT+CHE=?|(% style="width:198px" %)Get eight channels mode|(% style="width:349px" %)1(((
845 +|=(% colspan="3" %)AT+CHE
846 +|**Command Example**|**Function**|**Response**
847 +|AT+CHE=?|Get eight channels mode|1(((
962 962  902.3 902.5 902.7 902.9 903.1 903.3 903.5 903.7
963 963  
964 964  OK
965 965  )))
966 -|(% style="width:160px" %)AT+CHE=1|(% style="width:198px" %)Set eight channels mode|(% style="width:349px" %)OK
852 +|AT+CHE=1|Set eight channels mode|OK
967 967  
968 -{{info}}
969 -**Downlink Command: 0x24**
970 -{{/info}}
854 +Downlink Command: 0x24
971 971  
972 972  Format: Command Code (0x24) followed by 1 bytes channel value.
973 973  
974 974  If the downlink payload=2401, it means set channel mode to 1, while type code is 24.
975 975  
976 -* **Example 1**: Downlink Payload: 2401 ~/~/ set channel mode to 1
977 -* **Example 2**: Downlink Payload: 2405 ~/~/ set channel mode to 5
860 +* Example 1: Downlink Payload: 2401 ~/~/ set channel mode to 1
861 +* Example 2: Downlink Payload: 2405 ~/~/ set channel mode to 5
978 978  
979 979  == 7.20 Get or Set RXwindows1 timeout ==
980 980  
981 981  Feature:Get or Set the number of symbols to detect and timeout from RXwindow1(0 to 255).
982 982  
983 -{{info}}
984 -**AT Command: AT+RX1WTO**
985 -{{/info}}
867 +AT Command: AT+RX1WTO
986 986  
987 -(% border="1" style="background-color:#ffffcc; color:green; width:460.222px" %)
988 -|=(% colspan="3" style="width: 457px;" %)AT+ RX1WTO
989 -|(% style="width:163px" %)**Command Example**|(% style="width:201px" %)**Function**|(% style="width:93px" %)**Response**
990 -|(% style="width:163px" %)AT+RX1WTO=?|(% style="width:201px" %)Get RXwindows1 timeout|(% style="width:93px" %)14(((
869 +|=(% colspan="3" %)AT+ RX1WTO
870 +|**Command Example**|**Function**|**Response**
871 +|AT+RX1WTO=?|Get RXwindows1 timeout|14(((
991 991  OK
992 992  )))
993 -|(% style="width:163px" %)AT+RX1WTO=60|(% style="width:201px" %)Set RXwindows1 timeout|(% style="width:93px" %)OK
874 +|AT+RX1WTO=60|Set RXwindows1 timeout|OK
994 994  
995 -(((
996 -**AT+RX1TWO** is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
997 -)))
876 +AT+RX1TWO is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
998 998  
999 -[[image:image-20220526162535-1.png]]
878 +[[~[~[image:https://wiki.dragino.com/images/thumb/5/51/RX1WTO.JPG/600px-RX1WTO.JPG~|~|alt="RX1WTO.JPG" height="239" width="600"~]~]>>url:https://wiki.dragino.com/index.php/File:RX1WTO.JPG]]
1000 1000  
1001 -(((
1002 1002  Increasing thisvalue is equal to extending the time that the receiving window is opened, butthe corresponding power consumption will also increase. Properly increasingthis value can increase the success rate of the downlink.
1003 1003  
1004 -
1005 -)))
1006 -
1007 1007  == 7.21 Get or Set RXwindows2 timeout ==
1008 1008  
1009 1009  Feature:Get or Set the number of symbols to detect and timeout from RXwindow2(0 to 255).
1010 1010  
1011 -{{info}}
1012 -**AT Command: AT+RX2WTO**
1013 -{{/info}}
886 +AT Command: AT+RX2WTO
1014 1014  
1015 -(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
1016 -|=(% colspan="3" style="width: 494px;" %)AT+ RX2WTO
1017 -|(% style="width:190px" %)**Command Example**|(% style="width:199px" %)**Function**|(% style="width:104px" %)**Response**
1018 -|(% style="width:190px" %)AT+RX2WTO=?|(% style="width:199px" %)Get RXwindows2 timeout|(% style="width:104px" %)7(((
888 +|=(% colspan="3" %)AT+ RX2WTO
889 +|**Command Example**|**Function**|**Response**
890 +|AT+RX2WTO=?|Get RXwindows2 timeout|7(((
1019 1019  OK
1020 1020  )))
1021 -|(% style="width:190px" %)AT+RX2WTO=20|(% style="width:199px" %)Set RXwindows2 timeout|(% style="width:104px" %)OK
893 +|AT+RX2WTO=20|Set RXwindows2 timeout|OK
1022 1022  
1023 1023  == 7.22 Setting up uplinkdwelltime (as923, au915) ==
1024 1024  
1025 1025  Feature: Get or Set uplinkdwelltime
1026 1026  
1027 -{{info}}
1028 -**AT Command: AT+DWELLT**
1029 -{{/info}}
899 +AT Command: AT+DWELLT
1030 1030  
1031 -(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
1032 -|=(% colspan="3" style="width: 494px;" %)AT+DWELLT
1033 -|(% style="width:183px" %)**Command Example**|(% style="width:179px" %)**Function**|(% style="width:131px" %)**Response**
1034 -|(% style="width:183px" %)AT+DWELLT=?|(% style="width:179px" %)Get uplinkdwelltime|(% style="width:131px" %)1(((
901 +|=(% colspan="3" %)AT+DWELLT
902 +|**Command Example**|**Function**|**Response**
903 +|AT+DWELLT=?|Get uplinkdwelltime|1(((
1035 1035  OK
1036 1036  )))
1037 -|(% style="width:183px" %)AT+DWELLT=0|(% style="width:179px" %)Set uplinkdwelltime|(% style="width:131px" %)OK
906 +|AT+DWELLT=0|Set uplinkdwelltime|OK
1038 1038  
1039 -{{info}}
1040 -**Downlink Command: 0x25**
1041 -{{/info}}
908 +Downlink Command: 0x25
1042 1042  
1043 1043  Format: Command Code (0x25) followed by 1 bytes state value.
1044 1044  
1045 1045  If the downlink payload=2501, it means set uplinkdwelltime to 1, while type code is 25.
1046 1046  
1047 -* **Example 1**: Downlink Payload: **2501** ~/~/ set uplinkdwelltime to 1
1048 -* **Example 2**: Downlink Payload: **2500** ~/~/ set uplinkdwelltime to 0
914 +* Example 1: Downlink Payload: 2501 ~/~/ set uplinkdwelltime to 1
915 +* Example 2: Downlink Payload: 2500 ~/~/ set uplinkdwelltime to 0
1049 1049  
1050 1050  == 7.23 Set Packet Receiving Response Level ==
1051 1051  
... ... @@ -1053,11 +1053,11 @@
1053 1053  
1054 1054  RPL value:
1055 1055  
1056 -* **AT+RPL=0:** Device won't immediately reply any downlink commands from platform.
1057 -* **AT+RPL=1:** Device will immediately reply message to Unconfirmed Data Down. Payload is 0x00.
1058 -* **AT+RPL=2:** Device will immediately reply message to Confirmed Data Down. Payload is 0x00 and requied response header for this command.
1059 -* **AT+RPL=3:** Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command.
1060 -* **AT+RPL=4: **Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands.
923 +* AT+RPL=0: Device won't immediately reply any downlink commands from platform.
924 +* AT+RPL=1: Device will immediately reply message to Unconfirmed Data Down. Payload is 0x00.
925 +* AT+RPL=2: Device will immediately reply message to Confirmed Data Down. Payload is 0x00 and requied response header for this command.
926 +* AT+RPL=3: Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command.
927 +* AT+RPL=4: Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands.
1061 1061  
1062 1062  Case Analyes:
1063 1063  
... ... @@ -1065,44 +1065,37 @@
1065 1065  * For Class C devices used in ChirpStack, need to set AT+RPL=4 because Chirpstack require immedietely reply message to MAC Command.
1066 1066  * For Class C devices used in TTI, need to set AT+RPL=4 because TTI require immediately reply message to Confirmed Data Down & MAC Command.
1067 1067  
1068 -{{info}}
1069 -**AT Command: AT+RPL**
1070 -{{/info}}
935 +AT Command: AT+RPL
1071 1071  
1072 -(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1073 -|=(% colspan="3" style="width: 533px;" %)AT+RPL
1074 -|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1075 -|(% style="width:160px" %)AT+RPL=?|(% style="width:263px" %)Get packet receiving response level|(% style="width:109px" %)1(((
937 +|=(% colspan="3" %)AT+RPL
938 +|**Command Example**|**Function**|**Response**
939 +|AT+RPL=?|Get packet receiving response level|1(((
1076 1076  OK
1077 1077  )))
1078 -|(% style="width:160px" %)AT+RPL=0|(% style="width:263px" %)Set packet receiving response level|(% style="width:109px" %)OK
942 +|AT+RPL=0|Set packet receiving response level|OK
1079 1079  
1080 -{{info}}
1081 -**Downlink Command: 0x21**
1082 -{{/info}}
944 +Downlink Command: 0x21
1083 1083  
1084 1084  Format: Command Code (0x21) followed by 1 bytes level value.
1085 1085  
1086 1086  If the downlink payload=2101, it means set packet receiving response level to 1, while type code is 21.
1087 1087  
1088 -* **Example 1**: Downlink Payload: **2101** ~/~/ set packet receiving response level to 1
1089 -* **Example 2**: Downlink Payload: **2102** ~/~/ set packet receiving response level to 2
950 +* Example 1: Downlink Payload: 2101 ~/~/ set packet receiving response level to 1
951 +* Example 2: Downlink Payload: 2102 ~/~/ set packet receiving response level to 2
1090 1090  
1091 1091  = 8. AT Commands Combination =
1092 1092  
1093 1093  == 8.1 Set a fix RX2DR for downlink window ==
1094 1094  
1095 -* **AT+ADR=0 **~-~-> Disable ADR first
1096 -* **AT+RX2DR=xxxx** ~-~-> Set xxxx to your wanted DataRate
957 +* AT+ADR=0 ~-~-> Disable ADR first
958 +* AT+RX2DR=xxxx ~-~-> Set xxxx to your wanted DataRate
1097 1097  
1098 1098  == 8.2 Use Downlink Command to set a fix uplink DR ==
1099 1099  
1100 -{{info}}
1101 -**Downlink Command: 0x22000500**
1102 -{{/info}}
962 +Downlink Command: 0x22000500
1103 1103  
1104 1104  Same as:
1105 1105  
1106 -* AT+ADR=0  [[Reference>>||anchor="H7.1AdaptiveDataRate"]]
1107 -* AT+DR=5  [[Reference>>||anchor="H7.4DataRate"]]
1108 -* AT+TXP=0  [[Reference>>||anchor="H7.14TransmitPower"]]
966 +* AT+ADR=0 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Adaptive_Data_Rate]]
967 +* AT+DR=5 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Data_Rate]]
968 +* AT+TXP=0 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Transmit_Power]]
image-20220511120050-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -136.3 KB
Content
image-20220526162535-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -149.4 KB
Content

Applications

Navigation

Copyright ©2010-2022 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0