Last modified by kai on 2024/09/06 10:00
<
From version < 38.16 >
edited by Xiaoling
on 2022/05/30 10:52
To version < 7.6 >
edited by Xiaoling
on 2022/05/11 10:27
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,9 +1,8 @@
1 - **Contents：**
1 +Contens
2 2  
3 3  {{toc/}}
4 4  
5 5  
6 -
7 7  = 1. Introduction =
8 8  
9 9  Dragino LoRaWAN End Node support two types of AT Commands and Downlink Commands:
... ... @@ -11,95 +11,34 @@
11 11  * **Common Commands:** They should be available for each sensor, such as: change uplink interval, reset device.
12 12  * **Sensor Related Commands:** Only for special sensor, such as control relay, poll RS485 device.
13 13  
14 -(((
15 15  **This page shows the common commands since Dragino LoRaWAN stack DR-LWS-005. Make sure the end node support stack higher than DR-LWS-005 before checking this page.**
16 16  
17 -)))
18 18  
19 19  = 2. How to use AT Commands or Downlink command =
20 20  
21 21  * For AT Command , See Devices User Manual for Device. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
22 22  * For LoRaWAN Downlink: The gateway transfer downlink command in HEX format. This page shows the HEX format downlink code for each command. but some servers use base64 as downlink code. Below are reference for how to use downlink command:
23 -** Use HEX format to send a downlink: [[TTN v3>>doc:Main.Notes for TTN.WebHome]]
24 -** Use Base64 format to send a downlink: [[Chirpstack>>doc:Main.Notes for ChirpStack.WebHome]].
25 -** See use note for more serves [[Servers Note>>doc:Main.WebHome]](IoT LoRaWAN Server)
20 +** Use HEX format to send a downlink: [[TTN v3>>url:https://wiki.dragino.com/index.php/Notes_for_TTN#Send_Downlink_message]]
21 +** Use Base64 format to send a downlink: [[Chirpstack>>url:https://wiki.dragino.com/index.php/Notes_for_ChirpStack#Downlink]].
22 +** See use note for more serves [[Servers Note>>url:https://wiki.dragino.com/index.php/Main_Page#Use_Note_for_Server]]
26 26  
27 -
28 -
29 29  = 3. Support End Node and firmware version =
30 30  
31 -(% border="1" style="background-color:#ffffcc; color:green; width:966px" %)
32 -|=(% colspan="3" style="width: 963px;" %)(((
33 -Dragino STM32 base hardware Firmware / LoRaWAN stack list
34 -)))
35 -|(% style="width:187px" %)(((
36 -**Model**
37 -)))|(% style="width:330px" %)(((
38 -**Description**
39 -)))|(% style="width:445px" %)(((
40 -**Firmware Version <~-~-> Stack Version**
41 -)))
42 -|(% style="width:187px" %)(((
43 -[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],
44 -)))|(% style="width:330px" %)(((
45 -Open Source Generic LoRaWAN Sensor Node
46 -)))|(% style="width:445px" %)(((
47 -(((
48 -LSN50 v1.6.0 <~-~-> DR-LWS-003;
49 -)))
50 -
51 -(((
52 -(((
26 +(% style="background-color:#ffffcc; color:green; width:995.222px" %)
27 +|=(% colspan="3" style="width: 992px;" %)Dragino STM32 base hardware Firmware / LoRaWAN stack list
28 +|(% style="width:187px" %)**Model**|(% style="width:349px" %)**Description**|(% style="width:453px" %)**Firmware Version <~-~-> Stack Version**
29 +|(% style="width:187px" %)[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],|(% style="width:349px" %)Open Source Generic LoRaWAN Sensor Node|(% style="width:453px" %)LSN50 v1.6.0 <~-~-> DR-LWS-003;(((
53 53  LSN50 v1.7.0 <~-~-> DR-LWS-005; ~-~-> Support since this version
54 54  )))
55 -)))
56 -)))
57 -|(% style="width:187px" %)(((
58 -[[LGT92>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/142-lgt-92.html]],
59 -)))|(% style="width:330px" %)(((
60 -LoRaWAN GPS Tracker
61 -)))|(% style="width:445px" %)(((
62 -(((
63 -LGT92 v1.6.3 <~-~-> DR-LWS-003;
64 -)))
65 -
66 -(((
67 -(((
32 +|(% style="width:187px" %)[[LGT92>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/142-lgt-92.html]],|(% style="width:349px" %)LoRaWAN GPS Tracker|(% style="width:453px" %)LGT92 v1.6.3 <~-~-> DR-LWS-003;(((
68 68  LGT92 v1.6.4 <~-~-> DR-LWS-005;~-~-> Support since this version
69 69  )))
70 -)))
71 -)))
72 -|(% style="width:187px" %)(((
73 -[[LBT1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/165-lbt1.html]],
74 -)))|(% style="width:330px" %)(((
75 -LoRaWAN BLE Indoor Tracker
76 -)))|(% style="width:445px" %)(((
77 -LBT1 v1.0 <~-~-> DR-LWS-005;
78 -)))
79 -|(% style="width:187px" %)(((
80 -[[RS485-LN>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/154-rs485-ln.html]],
81 -)))|(% style="width:330px" %)(((
82 -LoRaWAN RS485 Modbus Converter
83 -)))|(% style="width:445px" %)(((
84 -RS485-LN v1.3 <~-~-> DR-LWS-005;
85 -)))
86 -|(% style="width:187px" %)(((
87 -[[LHT65>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/151-lht65.html]],
88 -)))|(% style="width:330px" %)(((
89 -LoRaWAN Temperature & Humidity Sensor
90 -)))|(% style="width:445px" %)(((
91 -(((
92 -LHT65 v1.7 <~-~-> DR-LWS-003;
93 -)))
94 -
95 -(((
96 -(((
35 +|(% style="width:187px" %)[[LBT1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/165-lbt1.html]],|(% style="width:349px" %)LoRaWAN BLE Indoor Tracker|(% style="width:453px" %)LBT1 v1.0 <~-~-> DR-LWS-005;
36 +|(% style="width:187px" %)[[RS485-LN>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/154-rs485-ln.html]],|(% style="width:349px" %)LoRaWAN RS485 Modbus Converter|(% style="width:453px" %)RS485-LN v1.3 <~-~-> DR-LWS-005;
37 +|(% style="width:187px" %)[[LHT65>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/151-lht65.html]],|(% style="width:349px" %)LoRaWAN Temperature & Humidity Sensor|(% style="width:453px" %)LHT65 v1.7 <~-~-> DR-LWS-003;(((
97 97  LHT65 v1.8.0 <~-~-> DR-LWS-005;~-~-> Support since this version
98 98  )))
99 -)))
100 -)))
101 101  
102 -
103 103  = 4. System Management Commands =
104 104  
105 105  == 4.1 Change Uplink Interval ==
... ... @@ -111,7 +111,7 @@
111 111  **AT Command: AT+TDC**
112 112  )))
113 113  
114 -(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
52 +(% style="background-color:#ffffcc; color:green; width:727.222px" %)
115 115  |=(% colspan="3" style="width: 724px;" %)AT+TDC
116 116  |(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
117 117  |(% style="width:165px" %)AT+TDC=?|(% style="width:227px" %)Show current transmit Interval|(% style="width:329px" %)30000(((
... ... @@ -127,18 +127,13 @@
127 127  **Downlink Command: 0x01**
128 128  {{/info}}
129 129  
130 -(((
131 131  Format: Command Code (0x01) followed by 3 bytes time value.
132 -)))
133 133  
134 -(((
135 135  If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
136 -)))
137 137  
138 138  * **Example 1**: Downlink Payload:** 0100001E** ~/~/ Set Transmit Interval (TDC) = 30 seconds
139 139  * **Example 2**: Downlink Payload:** 0100003C** ~/~/ Set Transmit Interval (TDC) = 60 seconds
140 140  
141 -
142 142  == 4.2 Reboot End Node ==
143 143  
144 144  Feature: Reboot End Node to perform a new OTAA or ABP Join.
... ... @@ -147,7 +147,7 @@
147 147  **AT Command: ATZ**
148 148  {{/info}}
149 149  
150 -(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
83 +(% border="0" style="background-color:#ffffcc; color:green; width:727.222px" %)
151 151  |=(% colspan="3" %)ATZ: Trig a reset of the MCU
152 152  |**Command Example**|**Function**|**Response**
153 153  |ATZ|Reset MCU|(((
... ... @@ -168,16 +168,10 @@
168 168  **Downlink Command: 0x04**
169 169  {{/info}}
170 170  
171 -(((
172 172  Format: Command Code (0x04) followed by FF.
173 -)))
174 174  
175 -(((
176 176  If the downlink payload=**04FF**, the end node will reboot.
177 177  
178 -
179 -)))
180 -
181 181  == 4.3 Reset to factory Default ==
182 182  
183 183  Feature: Reset the parameters to Factory Default, factory default value depends on the firmware settings, the OTAA and ABP keys will reserve after this command.
... ... @@ -186,7 +186,7 @@
186 186  **AT Command: AT+FDR**
187 187  {{/info}}
188 188  
189 -(% border="1" style="background-color:#ffffcc; color:green; width:831.222px" %)
116 +(% style="background-color:#ffffcc; color:green; width:831.222px" %)
190 190  |=(% colspan="3" style="width: 828px;" %)Reset to factory default
191 191  |(% style="width:181px" %)**Command Example**|(% style="width:181px" %)**Function**|(% style="width:465px" %)**Response**
192 192  |(% style="width:181px" %)AT+FDR|(% style="width:181px" %)Reset to factory default|(% style="width:465px" %)(((
... ... @@ -207,13 +207,9 @@
207 207  **Downlink Command: 0x04**
208 208  {{/info}}
209 209  
210 -(((
211 211  Format: Command Code (0x04) followed by FE.
212 -)))
213 213  
214 -(((
215 215  If the downlink payload=**04FE**, Reset Parameters to Factory Default, Keys Reserve.
216 -)))
217 217  
218 218  
219 219  == 4.4 Show Firmware Version ==
... ... @@ -224,10 +224,10 @@
224 224  **AT Command: AT+VER**
225 225  {{/info}}
226 226  
227 -(% border="1" style="background-color:#ffffcc; color:green; width:586px" %)
228 -|=(% colspan="3" style="width: 583px;" %)AT+VER: Image Version and Frequency Band
229 -|(% style="width:170px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:113px" %)**Response**
230 -|(% style="width:170px" %)AT+VER=?|(% style="width:300px" %)Show Image version and Frequency Band|(% style="width:113px" %)(((
150 +(% style="background-color:#ffffcc; color:green" %)
151 +|=(% colspan="3" %)AT+VER: Image Version and Frequency Band
152 +|**Command Example**|**Function**|**Response**
153 +|AT+VER=?|Show Image version and Frequency Band|(((
231 231  1.3 EU868
232 232  
233 233  OK
... ... @@ -237,25 +237,17 @@
237 237  **Downlink Command: 0x26 (Valid in 006 stack)**
238 238  {{/info}}
239 239  
240 -(((
241 241  Downlink Format: 0x26
242 -)))
243 243  
244 -(((
245 245  Device will reply with firmware version info, device info. frequency band info. detail please check device user manual. Total 5 bytes Example: If device is of firmware version 1.1.0 Upload: xx ~-~- yy ~-~- zz ~-~- 110 total 5 bytes
246 -)))
247 247  
248 -(((
249 249  **xx: Software Type:**
250 -)))
251 251  
252 252  * 0x00 01: LGT92 Version
253 253  * 0x00 02: LBT1
254 254  * 0x00 03: LSE01/LDDS75/LDDS20/LSPH01/LLMS01/LSNPK01
255 255  
256 -(((
257 257  **yy: Frequency Band:**
258 -)))
259 259  
260 260  * 0x01: EU868
261 261  * 0x02: US915
... ... @@ -268,9 +268,7 @@
268 268  * 0x09: AS923-2
269 269  * 0xa0: AS923-3
270 270  
271 -(((
272 272  **zz: Subband**
273 -)))
274 274  
275 275  firmware version: v1.1.0 ~-~-> 110
276 276  
... ... @@ -283,7 +283,7 @@
283 283  **AT Command: AT+CFG**
284 284  {{/info}}
285 285  
286 -(% border="1" style="background-color:#ffffcc; color:green; width:599.222px" %)
199 +(% style="background-color:#ffffcc; color:green; width:599.222px" %)
287 287  |=(% colspan="3" style="width: 596px;" %)AT+CFG: Print all configurations
288 288  |(% style="width:160px" %)**Command Example**|(% style="width:154px" %)**Function**|(% style="width:280px" %)**Response**
289 289  |(% style="width:160px" %)AT+CFG|(% style="width:154px" %)Show all configures|(% style="width:280px" %)(((
... ... @@ -301,7 +301,6 @@
301 301  )))
302 302  
303 303  
304 -
305 305  = 5. Keys, IDs and EUIs management =
306 306  
307 307  == 5.1 Application EUI ==
... ... @@ -312,7 +312,7 @@
312 312  **AT Command: AT+APPEUI**
313 313  {{/info}}
314 314  
315 -(% border="1" style="background-color:#ffffcc; color:green; width:686.222px" %)
227 +(% style="background-color:#ffffcc; color:green; width:686.222px" %)
316 316  |=(% colspan="3" style="width: 683px;" %)AT+APPEUI
317 317  |(% style="width:305px" %)**Command Example**|(% style="width:186px" %)**Function**|(% style="width:191px" %)**Response**
318 318  |(% style="width:305px" %)AT+APPEUI=?|(% style="width:186px" %)Get the Application EUI|(% style="width:191px" %)00 b3 d5 00 00 00 00 00(((
... ... @@ -320,7 +320,6 @@
320 320  )))
321 321  |(% style="width:305px" %)AT+APPEUI=00 b3 d5 7e f0 00 4d 34|(% style="width:186px" %)Set the Application EUI|(% style="width:191px" %)OK
322 322  
323 -
324 324  == 5.2 Application Key ==
325 325  
326 326  Feature: Get or Set the Application Key.
... ... @@ -329,7 +329,7 @@
329 329  **AT Command: AT+APPKEY**
330 330  {{/info}}
331 331  
332 -(% border="1" style="background-color:#ffffcc; color:green; width:976.222px" %)
243 +(% style="background-color:#ffffcc; color:green; width:976.222px" %)
333 333  |=(% colspan="3" style="width: 973px;" %)AT+APPKEY
334 334  |(% style="width:441px" %)**Command Example**|(% style="width:180px" %)**Function**|(% style="width:350px" %)**Response**
335 335  |(% style="width:441px" %)AT+APPKEY=?|(% style="width:180px" %)Get the Application Key|(% style="width:350px" %)00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35(((
... ... @@ -337,7 +337,6 @@
337 337  )))
338 338  |(% style="width:441px" %)AT+APPKEY=00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35|(% style="width:180px" %)Set the Application Key|(% style="width:350px" %)OK
339 339  
340 -
341 341  == 5.3 Application Session Key ==
342 342  
343 343  Feature: Get or Set the Application Session Key.
... ... @@ -346,7 +346,7 @@
346 346  **AT Command: AT+APPSKEY**
347 347  {{/info}}
348 348  
349 -(% border="1" style="background-color:#ffffcc; color:green; width:1040.22px" %)
259 +(% style="background-color:#ffffcc; color:green; width:1040.22px" %)
350 350  |=(% colspan="3" style="width: 1037px;" %)AT+APPSKEY
351 351  |(% style="width:451px" %)**Command Example**|(% style="width:231px" %)**Function**|(% style="width:354px" %)**Response**
352 352  |(% style="width:451px" %)AT+APPSKEY=?|(% style="width:231px" %)Get the Application Session Key|(% style="width:354px" %)00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2(((
... ... @@ -356,8 +356,6 @@
356 356  OK
357 357  )))
358 358  
359 -
360 -
361 361  == 5.4 Device Address ==
362 362  
363 363  Feature: Get or Set the Device Address.
... ... @@ -366,7 +366,7 @@
366 366  **AT Command: AT+DADDR**
367 367  {{/info}}
368 368  
369 -(% border="1" style="background-color:#ffffcc; color:green; width:795.222px" %)
277 +(% style="background-color:#ffffcc; color:green; width:795.222px" %)
370 370  |=(% colspan="3" style="width: 792px;" %)AT+DADDR
371 371  |(% style="width:192px" %)**Command Example**|(% style="width:241px" %)**Function**|(% style="width:359px" %)**Response**
372 372  |(% style="width:192px" %)AT+DADDR=?|(% style="width:241px" %)Get the Application Session Key.|(% style="width:359px" %)(While Error in format, return AT_PARAM_ERROR)(((
... ... @@ -376,8 +376,6 @@
376 376  )))
377 377  |(% style="width:192px" %)AT+DADDR=A8 40 41 FF|(% style="width:241px" %)Set the Application Session Key.|(% style="width:359px" %)OK
378 378  
379 -
380 -
381 381  == 5.5 Device EUI ==
382 382  
383 383  Feature: Get or Set the Device EUI.
... ... @@ -386,7 +386,7 @@
386 386  **AT Command: AT+DEUI**
387 387  {{/info}}
388 388  
389 -(% border="1" style="background-color:#ffffcc; color:green; width:1035.22px" %)
295 +(% style="background-color:#ffffcc; color:green; width:1035.22px" %)
390 390  |=(% colspan="3" style="width: 1032px;" %)AT+DEUI
391 391  |(% style="width:250px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:634px" %)**Response**
392 392  |(% style="width:250px" %)AT+DEUI=?|(% style="width:147px" %)Get the Device EUI.|(% style="width:634px" %)00 44 34 22 33 45 55 55(((
... ... @@ -396,8 +396,6 @@
396 396  OK
397 397  )))
398 398  
399 -
400 -
401 401  == 5.6 Network ID ==
402 402  
403 403  Feature: Get or Set the Network ID.(You can enter this command change only after successful network connection)
... ... @@ -406,7 +406,7 @@
406 406  **AT Command: AT+NWKID**
407 407  {{/info}}
408 408  
409 -(% border="1" style="background-color:#ffffcc; color:green; width:448.222px" %)
313 +(% style="background-color:#ffffcc; color:green; width:448.222px" %)
410 410  |=(% colspan="3" style="width: 445px;" %)AT+NWKID
411 411  |(% style="width:191px" %)**Command Example**|(% style="width:153px" %)**Function**|(% style="width:101px" %)**Response**
412 412  |(% style="width:191px" %)AT+NWKID=?|(% style="width:153px" %)Get the Network ID.|(% style="width:101px" %)a8 40 41 ff(((
... ... @@ -414,8 +414,6 @@
414 414  )))
415 415  |(% style="width:191px" %)AT+NWKID=A8 40 41 FF|(% style="width:153px" %)Set the Network ID.|(% style="width:101px" %)OK
416 416  
417 -
418 -
419 419  == 5.7 Network Session Key ==
420 420  
421 421  Feature: Get or Set the Network Session Key
... ... @@ -424,7 +424,7 @@
424 424  **AT Command: AT+NWKSKEY**
425 425  {{/info}}
426 426  
427 -(% border="1" style="background-color:#ffffcc; color:green; width:1017.22px" %)
329 +(% style="background-color:#ffffcc; color:green; width:1017.22px" %)
428 428  |=(% colspan="3" style="width: 1014px;" %)AT+NWKSKEY
429 429  |(% style="width:455px" %)**Command Example**|(% style="width:215px" %)**Function**|(% style="width:343px" %)**Response**
430 430  |(% style="width:455px" %)AT+NWKSKEY=?|(% style="width:215px" %)Get the Network Session Key.|(% style="width:343px" %)00 4f 19 25 52 ce 97 09 d7 fa 84 71 db 51 02 92(((
... ... @@ -432,8 +432,6 @@
432 432  )))
433 433  |(% style="width:455px" %)AT+NWKSKEY=A8 40 41 FF FF 12 34 56 00 01 02 04 05 06 06 07|(% style="width:215px" %)Set the Network Session Key.|(% style="width:343px" %)OK
434 434  
435 -
436 -
437 437  = 6. Joining and sending date on LoRaWAN network =
438 438  
439 439  == 6.1 Confirm Mode ==
... ... @@ -444,7 +444,7 @@
444 444  **AT Command: AT+CFM**
445 445  {{/info}}
446 446  
447 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
347 +(% style="background-color:#ffffcc; color:green; width:710.222px" %)
448 448  |=(% colspan="3" style="width: 707px;" %)AT+CFM
449 449  |(% style="width:155px" %)**Command Example**|(% style="width:205px" %)**Function**|(% style="width:346px" %)**Response**
450 450  |(% style="width:155px" %)AT+CFM=?|(% style="width:205px" %)Get the confirmation mode|(% style="width:346px" %)0(((
... ... @@ -462,20 +462,15 @@
462 462  * Example 1: Downlink Payload: 0501 ~/~/ Set AT+CFM=1
463 463  * Example 2: Downlink Payload: 0500 ~/~/ Set AT+CFM=0
464 464  
465 -
466 -
467 467  == 6.2 Confirm Status ==
468 468  
469 469  Feature: Get confirmation status of the last AT+SEND (0-1).
470 470  
471 -{{info}}
472 -**AT Command: AT+CFS**
473 -{{/info}}
369 +AT Command: AT+CFS
474 474  
475 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
476 -|=(% colspan="3" style="width: 531px;" %)AT+CFS
477 -|(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:178px" %)**Response**
478 -|(% style="width:156px" %)AT+CFS=?|(% style="width:193px" %)Get confirmation status|(% style="width:178px" %)0(((
371 +|=(% colspan="3" %)AT+CFS
372 +|**Command Example**|**Function**|**Response**
373 +|AT+CFS=?|Get confirmation status|0(((
479 479  OK
480 480  )))
481 481  
... ... @@ -483,14 +483,11 @@
483 483  
484 484  Feature: Join network.
485 485  
486 -{{info}}
487 -**AT Command: AT+JOIN**
488 -{{/info}}
381 +AT Command: AT+JOIN
489 489  
490 -(% border="1" style="background-color:#ffffcc; color:green; width:647.222px" %)
491 -|=(% colspan="3" style="width: 644px;" %)AT+JOIN
492 -|(% style="width:163px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:334px" %)**Response**
493 -|(% style="width:163px" %)AT+JOIN ?|(% style="width:147px" %)Get imformation.|(% style="width:334px" %)AT+JOIN: Join network(((
383 +|=(% colspan="3" %)AT+JOIN
384 +|**Command Example**|**Function**|**Response**
385 +|AT+JOIN ?|Get imformation.|AT+JOIN: Join network(((
494 494  OK
495 495  
496 496  While Error in format, return AT_BUSY_ERROR
... ... @@ -500,42 +500,34 @@
500 500  
501 501  Feature: Get or Set the Network Join Mode. (0: ABP, 1: OTAA).
502 502  
503 -{{info}}
504 -**AT Command: AT+NJM**
505 -{{/info}}
395 +AT Command: AT+NJM
506 506  
507 -(% border="1" style="background-color:#ffffcc; color:green; width:753.222px" %)
508 -|=(% colspan="3" style="width: 750px;" %)AT+NJM
509 -|(% style="width:162px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:361px" %)**Response**
510 -|(% style="width:162px" %)AT+NJM=?|(% style="width:227px" %)Get the Network Join Mode|(% style="width:361px" %)1(((
397 +|=(% colspan="3" %)AT+NJM
398 +|**Command Example**|**Function**|**Response**
399 +|AT+NJM=?|Get the Network Join Mode|1(((
511 511  OK
512 512  )))
513 -|(% style="width:162px" %)AT+NJM=0|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)OK
514 -|(% style="width:162px" %)AT+NJM=2|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)While Error in format, return AT_PARAM_ERROR
402 +|AT+NJM=0|Set the Network Join Mode|OK
403 +|AT+NJM=2|Set the Network Join Mode|While Error in format, return AT_PARAM_ERROR
515 515  
516 -{{info}}
517 -**Downlink Command: 0x20**
518 -{{/info}}
405 +Downlink Command: 0x20
519 519  
520 520  Format: Command Code (0x20) followed by 1 bytes mode value.
521 521  
522 522  If the downlink payload=2000, it means set the Network Join Mode, while type code is 20.
523 523  
524 -* **Example 1: **Downlink Payload: **2000** ~/~/ Set AT+NJM=O
525 -* **Example 2:** Downlink Payload: **2001** ~/~/ Set AT+NJM=1
411 +* Example 1: Downlink Payload: 2000 ~/~/ Set AT+NJM=O
412 +* Example 2: Downlink Payload: 2001 ~/~/ Set AT+NJM=1
526 526  
527 527  == 6.5 LoRa® Network Join Status ==
528 528  
529 529  Feature: LoRa® Network Join Status.
530 530  
531 -{{info}}
532 -**AT Command: AT+NJS**
533 -{{/info}}
418 +AT Command: AT+NJS
534 534  
535 -(% border="1" style="background-color:#ffffcc; color:green; width:498.222px" %)
536 -|=(% colspan="3" style="width: 495px;" %)AT+NJS
537 -|(% style="width:169px" %)**Command Example**|(% style="width:164px" %)**Function**|(% style="width:161px" %)**Response**
538 -|(% style="width:169px" %)AT+NJS=?|(% style="width:164px" %)Get the join status.|(% style="width:161px" %)0(((
420 +|=(% colspan="3" %)AT+NJS
421 +|**Command Example**|**Function**|**Response**
422 +|AT+NJS=?|Get the join status.|0(((
539 539  OK
540 540  )))
541 541  
... ... @@ -543,14 +543,11 @@
543 543  
544 544  Feature: Print Last Received Data in Raw Format<port:data>.
545 545  
546 -{{info}}
547 -**AT Command: AT+RECV**
548 -{{/info}}
430 +AT Command: AT+RECV
549 549  
550 -(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
551 -|=(% colspan="3" style="width: 584px;" %)AT+RECV
552 -|(% style="width:161px" %)**Command Example**|(% style="width:272px" %)**Function**|(% style="width:150px" %)**Response**
553 -|(% style="width:161px" %)AT+RECV=?|(% style="width:272px" %)print last received data in raw format.|(% style="width:150px" %)0:(((
432 +|=(% colspan="3" %)AT+RECV
433 +|**Command Example**|**Function**|**Response**
434 +|AT+RECV=?|print last received data in raw format.|0:(((
554 554  OK
555 555  )))
556 556  
... ... @@ -558,14 +558,11 @@
558 558  
559 559  Feature: Print Last Received Data in Binary Format<port:data>.
560 560  
561 -{{info}}
562 -**AT Command: AT+RECVB**
563 -{{/info}}
442 +AT Command: AT+RECVB
564 564  
565 -(% border="1" style="background-color:#ffffcc; color:green; width:793.222px" %)
566 -|=(% colspan="3" style="width: 790px;" %)AT+RECVB
567 -|(% style="width:173px" %)**Command Example**|(% style="width:497px" %)**Function**|(% style="width:120px" %)**Response**
568 -|(% style="width:173px" %)AT+RECVB=?|(% style="width:497px" %)print last received data in binary format (with hexadecimal values).|(% style="width:120px" %)2: 0010(((
444 +|=(% colspan="3" %)AT+RECVB
445 +|**Command Example**|**Function**|**Response**
446 +|AT+RECVB=?|print last received data in binary format (with hexadecimal values).|2: 0010(((
569 569  OK
570 570  )))
571 571  
... ... @@ -573,14 +573,11 @@
573 573  
574 574  Feature: Send Text Data<port:data>.
575 575  
576 -{{info}}
577 -**AT Command: AT+SEND**
578 -{{/info}}
454 +AT Command: AT+SEND
579 579  
580 -(% border="1" style="background-color:#ffffcc; color:green; width:991.222px" %)
581 -|=(% colspan="3" style="width: 988px;" %)AT+SEND
582 -|(% style="width:201px" %)**Command Example**|(% style="width:340px" %)**Function**|(% style="width:446px" %)**Response**
583 -|(% style="width:201px" %)AT+SEND=12:hello world|(% style="width:340px" %)Send text data along with the application port.|(% style="width:446px" %)OK(((
456 +|=(% colspan="3" %)AT+SEND
457 +|**Command Example**|**Function**|**Response**
458 +|AT+SEND=12:hello world|Send text data along with the application port.|OK(((
584 584  While Error in format, return
585 585  
586 586  AT_BUSY_ERROR/AT_BUSY_ERROR/AT_NO_NETWORK_JOINED
... ... @@ -592,15 +592,12 @@
592 592  
593 593  Feature: Send hexadecimal data along with the application port.
594 594  
595 -{{info}}
596 -**AT Command: AT+SENDB**
597 -{{/info}}
470 +AT Command: AT+SENDB
598 598  
599 -(% border="1" style="background-color:#ffffcc; color:green; width:1120.22px" %)
600 -|=(% colspan="3" style="width: 1117px;" %)AT+SENDB
601 -|(% style="width:257px" %)**Command Example**|(% style="width:406px" %)**Function**|(% style="width:453px" %)**Response**
602 -|(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)OK
603 -|(% style="width:257px" %)AT+SENDB=abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)While Error in format, return(((
472 +|=(% colspan="3" %)AT+SENDB
473 +|**Command Example**|**Function**|**Response**
474 +|AT+SENDB=12:abcdef0123456789|Send hexadecimal data along with the application port.|OK
475 +|AT+SENDB=abcdef0123456789|Send hexadecimal data along with the application port.|While Error in format, return(((
604 604  AT_PARAM_ERROR AT_BUSY_ERROR/AT_NO_NETWORK_JOINED
605 605  
606 606  
... ... @@ -612,46 +612,39 @@
612 612  
613 613  Feature: Get or Set the Adaptive Data Rate setting. (0: off, 1: on).
614 614  
615 -{{info}}
616 -**AT Command: AT+ADR**
617 -{{/info}}
618 618  
619 -(% border="1" style="background-color:#ffffcc; color:green; width:683.222px" %)
620 -|=(% colspan="3" style="width: 680px;" %)AT+ADR
621 -|(% style="width:162px" %)**Command Example**|(% style="width:266px" %)**Function**|(% style="width:250px" %)**Response**
622 -|(% style="width:162px" %)AT+ADR=?|(% style="width:266px" %)Get the Adaptive Data Rate setting.|(% style="width:250px" %)1(((
488 +AT Command: AT+ADR
489 +
490 +|=(% colspan="3" %)AT+ADR
491 +|**Command Example**|**Function**|**Response**
492 +|AT+ADR=?|Get the Adaptive Data Rate setting.|1(((
623 623  OK
624 624  )))
625 -|(% style="width:162px" %)AT+ADR=0|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:250px" %)OK
626 -|(% style="width:162px" %)AT+ADR=2|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:250px" %)While Error in format, return(((
495 +|AT+ADR=0|Set the Adaptive Data Rate setting.|OK
496 +|AT+ADR=2|Set the Adaptive Data Rate setting.|While Error in format, return(((
627 627  AT_PARAM_ERROR
628 628  )))
629 629  
630 -{{info}}
631 -**Downlink Command: 0x22**
632 -{{/info}}
500 +Downlink Command: 0x22
633 633  
634 634  
635 635  If the downlink payload=2201, it means setting the adaptive data rate to 1, while type code is 22.
636 636  
637 -* **Example 1**: Downlink Payload: **2201** ~/~/ Set AT+ADR=1.
638 -* **Example 2**: Downlink Payload: **2200FFFF** ~/~/ Set AT+ADR=0.
505 +* Example 1: Downlink Payload: 2201 ~/~/ Set AT+ADR=1.
506 +* Example 2: Downlink Payload: 2200FFFF ~/~/ Set AT+ADR=0.
639 639  
640 640  == 7.2 LoRa® Class ==
641 641  
642 642  Feature: Get or Set the Device Class(Currently only support class A, class C).
643 643  
644 -{{info}}
645 -**AT Command:AT+CLASS**
646 -{{/info}}
512 +AT Command:AT+CLASS
647 647  
648 -(% border="1" style="background-color:#ffffcc; color:green; width:507.222px" %)
649 -|=(% colspan="3" style="width: 504px;" %)AT+CLASS
650 -|(% style="width:163px" %)**Command Example**|(% style="width:166px" %)**Function**|(% style="width:175px" %)**Response**
651 -|(% style="width:163px" %)AT+CLASS=?|(% style="width:166px" %)Get the Device Class.|(% style="width:175px" %)A(((
514 +|=(% colspan="3" %)AT+CLASS
515 +|**Command Example**|**Function**|**Response**
516 +|AT+CLASS=?|Get the Device Class.|A(((
652 652  OK
653 653  )))
654 -|(% style="width:163px" %)AT+CLASS=C|(% style="width:166px" %)Set the Device Class.|(% style="width:175px" %)OK(((
519 +|AT+CLASS=C|Set the Device Class.|OK(((
655 655  
656 656  )))
657 657  
... ... @@ -659,17 +659,14 @@
659 659  
660 660  Feature: Get or Set the ETSI Duty Cycle setting - 0=disable, 1=enable - Only for testing.
661 661  
662 -{{info}}
663 -**AT Command:AT+DCS**
664 -{{/info}}
527 +AT Command:AT+DCS
665 665  
666 -(% border="1" style="background-color:#ffffcc; color:green; width:515.222px" %)
667 -|=(% colspan="3" style="width: 512px;" %)AT+DCS
668 -|(% style="width:165px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:107px" %)**Response**
669 -|(% style="width:165px" %)AT+DCS=?|(% style="width:239px" %)Get the ETSI Duty Cycle setting.|(% style="width:107px" %)1(((
529 +|=(% colspan="3" %)AT+DCS
530 +|**Command Example**|**Function**|**Response**
531 +|AT+DCS=?|Get the ETSI Duty Cycle setting.|1(((
670 670  OK
671 671  )))
672 -|(% style="width:165px" %)AT+DCS=1|(% style="width:239px" %)Set the ETSI Duty Cycle setting.|(% style="width:107px" %)OK(((
534 +|AT+DCS=1|Set the ETSI Duty Cycle setting.|OK(((
673 673  
674 674  )))
675 675  
... ... @@ -677,45 +677,37 @@
677 677  
678 678  Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) . Note: while set Data Rate, please use set Adptive Data Rate, ADR=0 first. otherwise device will response to server's ADR command and change the DR to the setting from server
679 679  
680 -{{info}}
681 -**AT Command: AT+DR**
682 -{{/info}}
542 +AT Command: AT+DR
683 683  
684 -(% border="1" style="background-color:#ffffcc; color:green; width:466.222px" %)
685 -|=(% colspan="3" style="width: 463px;" %)AT+DR
686 -|(% style="width:156px" %)**Command Example**|(% style="width:167px" %)**Function**|(% style="width:140px" %)**Response**
687 -|(% style="width:156px" %)AT+DR=?|(% style="width:167px" %)Get the Data Rate.|(% style="width:140px" %)5(((
544 +|=(% colspan="3" %)AT+DR
545 +|**Command Example**|**Function**|**Response**
546 +|AT+DR=?|Get the Data Rate.|5(((
688 688  OK
689 689  )))
690 -|(% style="width:156px" %)AT+DR=2|(% style="width:167px" %)Set the Data Rate.|(% style="width:140px" %)OK(((
549 +|AT+DR=2|Set the Data Rate.|OK(((
691 691  
692 692  )))
693 693  
694 -{{info}}
695 -**Downlink Command: 0x2200aaFF**
696 -{{/info}}
553 +Downlink Command: 0x2200aaFF
697 697  
698 698  
699 699  If the downlink payload=220001FF, it means setting the data rate to 1, while type code is 22 00 aa FF.
700 700  
701 -* **Example 1**: Downlink Payload: **220001FF** ~/~/ Set AT+DR=1.
702 -* **Example 2**: Downlink Payload: **220000FF** ~/~/ Set AT+DR=0.
558 +* Example 1: Downlink Payload: 220001FF ~/~/ Set AT+DR=1.
559 +* Example 2: Downlink Payload: 220000FF ~/~/ Set AT+DR=0.
703 703  
704 704  == 7.5 Frame Counter Downlink ==
705 705  
706 706  Feature: Get or Set the Frame Counter Downlink.
707 707  
708 -{{info}}
709 -**AT Command:AT+FCD**
710 -{{/info}}
565 +AT Command:AT+FCD
711 711  
712 -(% border="1" style="background-color:#ffffcc; color:green; width:693.222px" %)
713 -|=(% colspan="3" style="width: 690px;" %)AT+FCD
714 -|(% style="width:162px" %)**Command Example**|(% style="width:258px" %)**Function**|(% style="width:269px" %)**Response**
715 -|(% style="width:162px" %)AT+FCD=?|(% style="width:258px" %)Get the Frame Counter Downlink.|(% style="width:269px" %)0(((
567 +|=(% colspan="3" %)AT+FCD
568 +|**Command Example**|**Function**|**Response**
569 +|AT+FCD=?|Get the Frame Counter Downlink.|0(((
716 716  OK
717 717  )))
718 -|(% style="width:162px" %)AT+FCD=10|(% style="width:258px" %)Set the Frame Counter Downlink.|(% style="width:269px" %)(System will write new value to FCD)(((
572 +|AT+FCD=10|Set the Frame Counter Downlink.|(System will write new value to FCD)(((
719 719  OK
720 720  
721 721  
... ... @@ -725,17 +725,14 @@
725 725  
726 726  Feature: Get or Set the Frame Counter Uplink.
727 727  
728 -{{info}}
729 -**AT Command:AT+FCU**
730 -{{/info}}
582 +AT Command:AT+FCU
731 731  
732 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
733 -|=(% colspan="3" style="width: 531px;" %)AT+FCU
734 -|(% style="width:177px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:113px" %)**Response**
735 -|(% style="width:177px" %)AT+FCU=?|(% style="width:239px" %)Get the Frame Counter Uplink.|(% style="width:113px" %)0(((
584 +|=(% colspan="3" %)AT+FCU
585 +|**Command Example**|**Function**|**Response**
586 +|AT+FCU=?|Get the Frame Counter Uplink.|0(((
736 736  OK
737 737  )))
738 -|(% style="width:177px" %)AT+FCU=10|(% style="width:239px" %)Set the Frame Counter Uplink.|(% style="width:113px" %)OK(((
589 +|AT+FCU=10|Set the Frame Counter Uplink.|OK(((
739 739  
740 740  )))
741 741  
... ... @@ -743,17 +743,14 @@
743 743  
744 744  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 1 in ms.
745 745  
746 -{{info}}
747 -**AT Command:AT+JN1DL**
748 -{{/info}}
597 +AT Command:AT+JN1DL
749 749  
750 -(% border="1" style="background-color:#ffffcc; color:green; width:537.222px" %)
751 -|=(% colspan="3" style="width: 534px;" %)AT+JN1DL
752 -|(% style="width:164px" %)**Command Example**|(% style="width:229px" %)**Function**|(% style="width:140px" %)**Response**
753 -|(% style="width:164px" %)AT+JN1DL=?|(% style="width:229px" %)Get the Join Accept Delay.|(% style="width:140px" %)5000(((
599 +|=(% colspan="3" %)AT+JN1DL
600 +|**Command Example**|**Function**|**Response**
601 +|AT+JN1DL=?|Get the Join Accept Delay.|5000(((
754 754  OK
755 755  )))
756 -|(% style="width:164px" %)AT+JN1DL=10000|(% style="width:229px" %)Set the Join Accept Delay.|(% style="width:140px" %)OK(((
604 +|AT+JN1DL=10000|Set the Join Accept Delay.|OK(((
757 757  
758 758  )))
759 759  
... ... @@ -761,17 +761,14 @@
761 761  
762 762  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 2 in ms.
763 763  
764 -{{info}}
765 -**AT Command:AT+JN2DL**
766 -{{/info}}
612 +AT Command:AT+JN2DL
767 767  
768 -(% border="1" style="background-color:#ffffcc; color:green; width:538.222px" %)
769 -|=(% colspan="3" style="width: 535px;" %)AT+JN2DL
770 -|(% style="width:160px" %)**Command Example**|(% style="width:228px" %)**Function**|(% style="width:146px" %)**Response**
771 -|(% style="width:160px" %)AT+JN2DL=?|(% style="width:228px" %)Get the Join Accept Delay.|(% style="width:146px" %)6000(((
614 +|=(% colspan="3" %)AT+JN2DL
615 +|**Command Example**|**Function**|**Response**
616 +|AT+JN2DL=?|Get the Join Accept Delay.|6000(((
772 772  OK
773 773  )))
774 -|(% style="width:160px" %)AT+JN2DL=20000|(% style="width:228px" %)Set the Join Accept Delay.|(% style="width:146px" %)OK(((
619 +|AT+JN2DL=20000|Set the Join Accept Delay.|OK(((
775 775  
776 776  )))
777 777  
... ... @@ -779,17 +779,14 @@
779 779  
780 780  Feature: Get or Set the public network mode. (0: off, 1: on)
781 781  
782 -{{info}}
783 -**AT Command:AT+PNM**
784 -{{/info}}
627 +AT Command:AT+PNM
785 785  
786 -(% border="1" style="background-color:#ffffcc; color:green; width:667.222px" %)
787 -|=(% colspan="3" style="width: 664px;" %)AT+PNM
788 -|(% style="width:166px" %)**Command Example**|(% style="width:225px" %)**Function**|(% style="width:272px" %)**Response**
789 -|(% style="width:166px" %)AT+PNM=?|(% style="width:225px" %)Get the public network mode.|(% style="width:272px" %)1(((
629 +|=(% colspan="3" %)AT+PNM
630 +|**Command Example**|**Function**|**Response**
631 +|AT+PNM=?|Get the public network mode.|1(((
790 790  OK
791 791  )))
792 -|(% style="width:166px" %)AT+PNM=1|(% style="width:225px" %)Set the public network mode.|(% style="width:272px" %)(System will write new value to PNM)(((
634 +|AT+PNM=1|Set the public network mode.|(System will write new value to PNM)(((
793 793  OK
794 794  
795 795  
... ... @@ -799,35 +799,29 @@
799 799  
800 800  Feature: Get or Set the delay between the end of the Tx and the Rx Window 1 in ms
801 801  
802 -{{info}}
803 -**AT Command:AT+RX1DL**
804 -{{/info}}
644 +AT Command:AT+RX1DL
805 805  
806 -(% border="1" style="background-color:#ffffcc; color:green; width:408.222px" %)
807 -|=(% colspan="3" style="width: 405px;" %)AT+RX1DL
808 -|(% style="width:155px" %)**Command Example**|(% style="width:128px" %)**Function**|(% style="width:122px" %)**Response**
809 -|(% style="width:155px" %)AT+RX1DL=?|(% style="width:128px" %)Get the delay.|(% style="width:122px" %)1000(((
646 +|=(% colspan="3" %)AT+RX1DL
647 +|**Command Example**|**Function**|**Response**
648 +|AT+RX1DL=?|Get the delay.|1000(((
810 810  OK
811 811  )))
812 -|(% style="width:155px" %)AT+RX1DL=1500|(% style="width:128px" %)Set the delay.|(% style="width:122px" %)OK(((
651 +|AT+RX1DL=1500|Set the delay.|OK(((
813 813  
814 814  )))
815 815  
816 -== 7.11 Receive Delay2 ==
655 +== 7.11Receive Delay2 ==
817 817  
818 818  Feature: Get or Set the delay between the end of the Tx and the Rx Window 2 in ms
819 819  
820 -{{info}}
821 -**AT Command:AT+RX2DL**
822 -{{/info}}
659 +AT Command:AT+RX2DL
823 823  
824 -(% border="1" style="background-color:#ffffcc; color:green; width:481.222px" %)
825 -|=(% colspan="3" style="width: 478px;" %)AT+RX2DL
826 -|(% style="width:175px" %)**Command Example**|(% style="width:152px" %)**Function**|(% style="width:150px" %)**Response**
827 -|(% style="width:175px" %)AT+RX2DL=?|(% style="width:152px" %)Get the delay.|(% style="width:150px" %)2000(((
661 +|=(% colspan="3" %)AT+RX2DL
662 +|**Command Example**|**Function**|**Response**
663 +|AT+RX2DL=?|Get the delay.|2000(((
828 828  OK
829 829  )))
830 -|(% style="width:175px" %)AT+RX2DL=2500|(% style="width:152px" %)Set the delay.|(% style="width:150px" %)OK(((
666 +|AT+RX2DL=2500|Set the delay.|OK(((
831 831  
832 832  )))
833 833  
... ... @@ -835,17 +835,14 @@
835 835  
836 836  Feature: Get or Set the Rx2 window data rate (0-7 corresponding to DR_X)
837 837  
838 -{{info}}
839 -**AT Command:AT+RX2DR**
840 -{{/info}}
674 +AT Command:AT+RX2DR
841 841  
842 -(% border="1" style="background-color:#ffffcc; color:green; width:525.222px" %)
843 -|=(% colspan="3" style="width: 522px;" %)AT+RX2DR
844 -|(% style="width:160px" %)**Command Example**|(% style="width:232px" %)**Function**|(% style="width:130px" %)**Response**
845 -|(% style="width:160px" %)AT+RX2DR=?|(% style="width:232px" %)Get the Rx2 window data rate.|(% style="width:130px" %)2(((
676 +|=(% colspan="3" %)AT+RX2DR
677 +|**Command Example**|**Function**|**Response**
678 +|AT+RX2DR=?|Get the Rx2 window data rate.|2(((
846 846  OK
847 847  )))
848 -|(% style="width:160px" %)AT+RX2DR=6|(% style="width:232px" %)Set the Rx2 window data rate.|(% style="width:130px" %)OK(((
681 +|AT+RX2DR=6|Set the Rx2 window data rate.|OK(((
849 849  
850 850  )))
851 851  
... ... @@ -853,17 +853,14 @@
853 853  
854 854  Feature: Get or Set the Rx2 window frequency
855 855  
856 -{{info}}
857 -**AT Command:AT+RX2FQ**
858 -{{/info}}
689 +AT Command:AT+RX2FQ
859 859  
860 -(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
861 -|=(% colspan="3" style="width: 584px;" %)AT+RX2FQ
862 -|(% style="width:183px" %)**Command Example**|(% style="width:240px" %)**Function**|(% style="width:160px" %)**Response**
863 -|(% style="width:183px" %)AT+RX2FQ=?|(% style="width:240px" %)Get the Rx2 window frequency.|(% style="width:160px" %)434665000(((
691 +|=(% colspan="3" %)AT+RX2FQ
692 +|**Command Example**|**Function**|**Response**
693 +|AT+RX2FQ=?|Get the Rx2 window frequency.|434665000(((
864 864  OK
865 865  )))
866 -|(% style="width:183px" %)AT+RX2FQ=434665000|(% style="width:240px" %)Set the Rx2 window frequency.|(% style="width:160px" %)OK(((
696 +|AT+RX2FQ=434665000|Set the Rx2 window frequency.|OK(((
867 867  
868 868  )))
869 869  
... ... @@ -871,17 +871,14 @@
871 871  
872 872  Feature: Get or Set the Transmit Power(0-5, MAX:0, MIN:5, according to LoRaWAN Spec, or 40=10dB, 41 = 11dB, …, 50 = 20dB which is out of LoRaWAN spec. )
873 873  
874 -{{info}}
875 -**AT Command:AT+TXP**
876 -{{/info}}
704 +AT Command:AT+TXP
877 877  
878 -(% border="1" style="background-color:#ffffcc; color:green; width:465.222px" %)
879 -|=(% colspan="3" style="width: 462px;" %)AT+TXP
880 -|(% style="width:161px" %)**Command Example**|(% style="width:189px" %)**Function**|(% style="width:112px" %)**Response**
881 -|(% style="width:161px" %)AT+TXP=?|(% style="width:189px" %)Get the Transmit Power.|(% style="width:112px" %)0(((
706 +|=(% colspan="3" %)AT+TXP
707 +|**Command Example**|**Function**|**Response**
708 +|AT+TXP=?|Get the Transmit Power.|0(((
882 882  OK
883 883  )))
884 -|(% style="width:161px" %)AT+TXP=1|(% style="width:189px" %)Set the Transmit Power.|(% style="width:112px" %)OK(((
711 +|AT+TXP=1|Set the Transmit Power.|OK(((
885 885  
886 886  )))
887 887  
... ... @@ -889,21 +889,18 @@
889 889  
890 890  If the downlink payload=22000100, it means setting the TXP to 0.
891 891  
892 -* **Example 1**: Downlink Payload: **22000102** ~/~/ Set AT+TXP=2.
893 -* **Example 2**: Downlink Payload: **220000FF** ~/~/ Set AT+TXP=0.
719 +* Example 1: Downlink Payload: 22000102 ~/~/ Set AT+TXP=2.
720 +* Example 2: Downlink Payload: 220000FF ~/~/ Set AT+TXP=0.
894 894  
895 895  == 7.15 RSSI of the Last Received Packet ==
896 896  
897 897  Feature: Get or Set the Rx2 window frequency
898 898  
899 -{{info}}
900 -**AT Command:AT+RSSI**
901 -{{/info}}
726 +AT Command:AT+RSSI
902 902  
903 -(% border="1" style="background-color:#ffffcc; color:green; width:557.222px" %)
904 -|=(% colspan="3" style="width: 554px;" %)AT+RSSI
905 -|(% style="width:164px" %)**Command Example**|(% style="width:289px" %)**Function**|(% style="width:100px" %)**Response**
906 -|(% style="width:164px" %)AT+RSSI=?|(% style="width:289px" %)Get the RSSI of the last received packet.|(% style="width:100px" %)0(((
728 +|=(% colspan="3" %)AT+RSSI
729 +|**Command Example**|**Function**|**Response**
730 +|AT+RSSI=?|Get the RSSI of the last received packet.|0(((
907 907  OK
908 908  )))
909 909  
... ... @@ -911,14 +911,11 @@
911 911  
912 912  Feature: Get the SNR of the last received packet
913 913  
914 -{{info}}
915 -**AT Command:AT+SNR**
916 -{{/info}}
738 +AT Command:AT+SNR
917 917  
918 -(% border="1" style="background-color:#ffffcc; color:green; width:571.222px" %)
919 -|=(% colspan="3" style="width: 568px;" %)AT+SNR
920 -|(% style="width:164px" %)**Command Example**|(% style="width:290px" %)**Function**|(% style="width:113px" %)**Response**
921 -|(% style="width:164px" %)AT+SNR=?|(% style="width:290px" %)Get the RSSI of the last received packet.|(% style="width:113px" %)0(((
740 +|=(% colspan="3" %)AT+SNR
741 +|**Command Example**|**Function**|**Response**
742 +|AT+SNR=?|Get the RSSI of the last received packet.|0(((
922 922  OK
923 923  )))
924 924  
... ... @@ -926,144 +926,114 @@
926 926  
927 927  Feature: Get or set the application port.
928 928  
929 -{{info}}
930 -**AT Command: AT+PORT**
931 -{{/info}}
750 +AT Command: AT+PORT
932 932  
933 -(% border="1" style="background-color:#ffffcc; color:green; width:500.222px" %)
934 -|=(% colspan="3" style="width: 497px;" %)AT+PORT
935 -|(% style="width:157px" %)**Command Example**|(% style="width:204px" %)**Function**|(% style="width:135px" %)**Response**
936 -|(% style="width:157px" %)AT+PORT=?|(% style="width:204px" %)Get the application port|(% style="width:135px" %)21(((
752 +|=(% colspan="3" %)AT+PORT
753 +|**Command Example**|**Function**|**Response**
754 +|AT+PORT=?|Get the application port|21(((
937 937  OK
938 938  )))
939 -|(% style="width:157px" %)AT+PORT=21|(% style="width:204px" %)Set the application port|(% style="width:135px" %)OK
757 +|AT+PORT=21|Set the application port|OK
940 940  
941 -{{info}}
942 -**Downlink Command: 0x23**
943 -{{/info}}
759 +Downlink Command: 0x23
944 944  
945 945  Format: Command Code (0x23) followed by 1 bytes port value.
946 946  
947 947  If the downlink payload=2301, it means set the application port to 1, while type code is 23.
948 948  
949 -* **Example 1**: Downlink Payload: **2301** ~/~/ set the application port to 1
950 -* **Example 2**: Downlink Payload:** 2305** ~/~/ set the application port to 5
765 +* Example 1: Downlink Payload: 2301 ~/~/ set the application port to 1
766 +* Example 2: Downlink Payload: 2305 ~/~/ set the application port to 5
951 951  
952 952  == 7.18 Single Channel Mode ==
953 953  
954 954  Feature:Get or Set Frequency (Unit: Hz) for Single Channel Mode.
955 955  
956 -{{info}}
957 -**AT Command: AT+CHS**
958 -{{/info}}
772 +AT Command: AT+CHS
959 959  
960 -(% border="1" style="background-color:#ffffcc; color:green; width:603.222px" %)
961 -|=(% colspan="3" style="width: 600px;" %)AT+CHS
962 -|(% style="width:182px" %)**Command Example**|(% style="width:295px" %)**Function**|(% style="width:122px" %)**Response**
963 -|(% style="width:182px" %)AT+CHS=?|(% style="width:295px" %)Get Frequency for Single Channel Mode|(% style="width:122px" %)0(((
774 +|=(% colspan="3" %)AT+CHS
775 +|**Command Example**|**Function**|**Response**
776 +|AT+CHS=?|Get Frequency for Single Channel Mode|0(((
964 964  OK
965 965  )))
966 -|(% style="width:182px" %)AT+CHS=868100000|(% style="width:295px" %)Set Frequency for Single Channel Mode|(% style="width:122px" %)OK
779 +|AT+CHS=868100000|Set Frequency for Single Channel Mode|OK
967 967  
968 968  == 7.19 Eight Channel Mode ==
969 969  
970 970  Feature: Get or Set eight channels mode,Only for US915,AU915,CN470.
971 971  
972 -{{info}}
973 -**AT Command: AT+CHE**
974 -{{/info}}
785 +AT Command: AT+CHE
975 975  
976 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
977 -|=(% colspan="3" style="width: 707px;" %)AT+CHE
978 -|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
979 -|(% style="width:160px" %)AT+CHE=?|(% style="width:198px" %)Get eight channels mode|(% style="width:349px" %)1(((
787 +|=(% colspan="3" %)AT+CHE
788 +|**Command Example**|**Function**|**Response**
789 +|AT+CHE=?|Get eight channels mode|1(((
980 980  902.3 902.5 902.7 902.9 903.1 903.3 903.5 903.7
981 981  
982 982  OK
983 983  )))
984 -|(% style="width:160px" %)AT+CHE=1|(% style="width:198px" %)Set eight channels mode|(% style="width:349px" %)OK
794 +|AT+CHE=1|Set eight channels mode|OK
985 985  
986 -{{info}}
987 -**Downlink Command: 0x24**
988 -{{/info}}
796 +Downlink Command: 0x24
989 989  
990 990  Format: Command Code (0x24) followed by 1 bytes channel value.
991 991  
992 992  If the downlink payload=2401, it means set channel mode to 1, while type code is 24.
993 993  
994 -* **Example 1**: Downlink Payload: 2401 ~/~/ set channel mode to 1
995 -* **Example 2**: Downlink Payload: 2405 ~/~/ set channel mode to 5
802 +* Example 1: Downlink Payload: 2401 ~/~/ set channel mode to 1
803 +* Example 2: Downlink Payload: 2405 ~/~/ set channel mode to 5
996 996  
997 997  == 7.20 Get or Set RXwindows1 timeout ==
998 998  
999 999  Feature:Get or Set the number of symbols to detect and timeout from RXwindow1(0 to 255).
1000 1000  
1001 -{{info}}
1002 -**AT Command: AT+RX1WTO**
1003 -{{/info}}
809 +AT Command: AT+RX1WTO
1004 1004  
1005 -(% border="1" style="background-color:#ffffcc; color:green; width:460.222px" %)
1006 -|=(% colspan="3" style="width: 457px;" %)AT+ RX1WTO
1007 -|(% style="width:163px" %)**Command Example**|(% style="width:201px" %)**Function**|(% style="width:93px" %)**Response**
1008 -|(% style="width:163px" %)AT+RX1WTO=?|(% style="width:201px" %)Get RXwindows1 timeout|(% style="width:93px" %)14(((
811 +|=(% colspan="3" %)AT+ RX1WTO
812 +|**Command Example**|**Function**|**Response**
813 +|AT+RX1WTO=?|Get RXwindows1 timeout|14(((
1009 1009  OK
1010 1010  )))
1011 -|(% style="width:163px" %)AT+RX1WTO=60|(% style="width:201px" %)Set RXwindows1 timeout|(% style="width:93px" %)OK
816 +|AT+RX1WTO=60|Set RXwindows1 timeout|OK
1012 1012  
1013 -(((
1014 -**AT+RX1TWO** is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
1015 -)))
818 +AT+RX1TWO is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
1016 1016  
1017 -[[image:image-20220526162535-1.png]]
820 +[[~[~[image:https://wiki.dragino.com/images/thumb/5/51/RX1WTO.JPG/600px-RX1WTO.JPG~|~|alt="RX1WTO.JPG" height="239" width="600"~]~]>>url:https://wiki.dragino.com/index.php/File:RX1WTO.JPG]]
1018 1018  
1019 -(((
1020 1020  Increasing thisvalue is equal to extending the time that the receiving window is opened, butthe corresponding power consumption will also increase. Properly increasingthis value can increase the success rate of the downlink.
1021 1021  
1022 -
1023 -)))
1024 -
1025 1025  == 7.21 Get or Set RXwindows2 timeout ==
1026 1026  
1027 1027  Feature:Get or Set the number of symbols to detect and timeout from RXwindow2(0 to 255).
1028 1028  
1029 -{{info}}
1030 -**AT Command: AT+RX2WTO**
1031 -{{/info}}
828 +AT Command: AT+RX2WTO
1032 1032  
1033 -(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
1034 -|=(% colspan="3" style="width: 494px;" %)AT+ RX2WTO
1035 -|(% style="width:190px" %)**Command Example**|(% style="width:199px" %)**Function**|(% style="width:104px" %)**Response**
1036 -|(% style="width:190px" %)AT+RX2WTO=?|(% style="width:199px" %)Get RXwindows2 timeout|(% style="width:104px" %)7(((
830 +|=(% colspan="3" %)AT+ RX2WTO
831 +|**Command Example**|**Function**|**Response**
832 +|AT+RX2WTO=?|Get RXwindows2 timeout|7(((
1037 1037  OK
1038 1038  )))
1039 -|(% style="width:190px" %)AT+RX2WTO=20|(% style="width:199px" %)Set RXwindows2 timeout|(% style="width:104px" %)OK
835 +|AT+RX2WTO=20|Set RXwindows2 timeout|OK
1040 1040  
1041 1041  == 7.22 Setting up uplinkdwelltime (as923, au915) ==
1042 1042  
1043 1043  Feature: Get or Set uplinkdwelltime
1044 1044  
1045 -{{info}}
1046 -**AT Command: AT+DWELLT**
1047 -{{/info}}
841 +AT Command: AT+DWELLT
1048 1048  
1049 -(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
1050 -|=(% colspan="3" style="width: 494px;" %)AT+DWELLT
1051 -|(% style="width:183px" %)**Command Example**|(% style="width:179px" %)**Function**|(% style="width:131px" %)**Response**
1052 -|(% style="width:183px" %)AT+DWELLT=?|(% style="width:179px" %)Get uplinkdwelltime|(% style="width:131px" %)1(((
843 +|=(% colspan="3" %)AT+DWELLT
844 +|**Command Example**|**Function**|**Response**
845 +|AT+DWELLT=?|Get uplinkdwelltime|1(((
1053 1053  OK
1054 1054  )))
1055 -|(% style="width:183px" %)AT+DWELLT=0|(% style="width:179px" %)Set uplinkdwelltime|(% style="width:131px" %)OK
848 +|AT+DWELLT=0|Set uplinkdwelltime|OK
1056 1056  
1057 -{{info}}
1058 -**Downlink Command: 0x25**
1059 -{{/info}}
850 +Downlink Command: 0x25
1060 1060  
1061 1061  Format: Command Code (0x25) followed by 1 bytes state value.
1062 1062  
1063 1063  If the downlink payload=2501, it means set uplinkdwelltime to 1, while type code is 25.
1064 1064  
1065 -* **Example 1**: Downlink Payload: **2501** ~/~/ set uplinkdwelltime to 1
1066 -* **Example 2**: Downlink Payload: **2500** ~/~/ set uplinkdwelltime to 0
856 +* Example 1: Downlink Payload: 2501 ~/~/ set uplinkdwelltime to 1
857 +* Example 2: Downlink Payload: 2500 ~/~/ set uplinkdwelltime to 0
1067 1067  
1068 1068  == 7.23 Set Packet Receiving Response Level ==
1069 1069  
... ... @@ -1071,11 +1071,11 @@
1071 1071  
1072 1072  RPL value:
1073 1073  
1074 -* **AT+RPL=0:** Device won't immediately reply any downlink commands from platform.
1075 -* **AT+RPL=1:** Device will immediately reply message to Unconfirmed Data Down. Payload is 0x00.
1076 -* **AT+RPL=2:** Device will immediately reply message to Confirmed Data Down. Payload is 0x00 and requied response header for this command.
1077 -* **AT+RPL=3:** Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command.
1078 -* **AT+RPL=4: **Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands.
865 +* AT+RPL=0: Device won't immediately reply any downlink commands from platform.
866 +* AT+RPL=1: Device will immediately reply message to Unconfirmed Data Down. Payload is 0x00.
867 +* AT+RPL=2: Device will immediately reply message to Confirmed Data Down. Payload is 0x00 and requied response header for this command.
868 +* AT+RPL=3: Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command.
869 +* AT+RPL=4: Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands.
1079 1079  
1080 1080  Case Analyes:
1081 1081  
... ... @@ -1083,44 +1083,37 @@
1083 1083  * For Class C devices used in ChirpStack, need to set AT+RPL=4 because Chirpstack require immedietely reply message to MAC Command.
1084 1084  * For Class C devices used in TTI, need to set AT+RPL=4 because TTI require immediately reply message to Confirmed Data Down & MAC Command.
1085 1085  
1086 -{{info}}
1087 -**AT Command: AT+RPL**
1088 -{{/info}}
877 +AT Command: AT+RPL
1089 1089  
1090 -(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1091 -|=(% colspan="3" style="width: 533px;" %)AT+RPL
1092 -|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1093 -|(% style="width:160px" %)AT+RPL=?|(% style="width:263px" %)Get packet receiving response level|(% style="width:109px" %)1(((
879 +|=(% colspan="3" %)AT+RPL
880 +|**Command Example**|**Function**|**Response**
881 +|AT+RPL=?|Get packet receiving response level|1(((
1094 1094  OK
1095 1095  )))
1096 -|(% style="width:160px" %)AT+RPL=0|(% style="width:263px" %)Set packet receiving response level|(% style="width:109px" %)OK
884 +|AT+RPL=0|Set packet receiving response level|OK
1097 1097  
1098 -{{info}}
1099 -**Downlink Command: 0x21**
1100 -{{/info}}
886 +Downlink Command: 0x21
1101 1101  
1102 1102  Format: Command Code (0x21) followed by 1 bytes level value.
1103 1103  
1104 1104  If the downlink payload=2101, it means set packet receiving response level to 1, while type code is 21.
1105 1105  
1106 -* **Example 1**: Downlink Payload: **2101** ~/~/ set packet receiving response level to 1
1107 -* **Example 2**: Downlink Payload: **2102** ~/~/ set packet receiving response level to 2
892 +* Example 1: Downlink Payload: 2101 ~/~/ set packet receiving response level to 1
893 +* Example 2: Downlink Payload: 2102 ~/~/ set packet receiving response level to 2
1108 1108  
1109 1109  = 8. AT Commands Combination =
1110 1110  
1111 1111  == 8.1 Set a fix RX2DR for downlink window ==
1112 1112  
1113 -* **AT+ADR=0 **~-~-> Disable ADR first
1114 -* **AT+RX2DR=xxxx** ~-~-> Set xxxx to your wanted DataRate
899 +* AT+ADR=0 ~-~-> Disable ADR first
900 +* AT+RX2DR=xxxx ~-~-> Set xxxx to your wanted DataRate
1115 1115  
1116 1116  == 8.2 Use Downlink Command to set a fix uplink DR ==
1117 1117  
1118 -{{info}}
1119 -**Downlink Command: 0x22000500**
1120 -{{/info}}
904 +Downlink Command: 0x22000500
1121 1121  
1122 1122  Same as:
1123 1123  
1124 -* AT+ADR=0  [[Reference>>||anchor="H7.1AdaptiveDataRate"]]
1125 -* AT+DR=5  [[Reference>>||anchor="H7.4DataRate"]]
1126 -* AT+TXP=0  [[Reference>>||anchor="H7.14TransmitPower"]]
908 +* AT+ADR=0 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Adaptive_Data_Rate]]
909 +* AT+DR=5 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Data_Rate]]
910 +* AT+TXP=0 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Transmit_Power]]
image-20220511120050-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -136.3 KB
Content
image-20220526162535-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -149.4 KB
Content

Applications

Navigation

Copyright ©2010-2022 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0