Last modified by kai on 2024/09/06 10:00
<
From version < 38.130 >
edited by Xiaoling
on 2022/06/01 11:58
To version < 7.9 >
edited by Xiaoling
on 2022/05/11 11:31
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,9 +1,8 @@
1 - **Contents：**
1 +Contens
2 2  
3 3  {{toc/}}
4 4  
5 5  
6 -
7 7  = 1. Introduction =
8 8  
9 9  Dragino LoRaWAN End Node support two types of AT Commands and Downlink Commands:
... ... @@ -11,96 +11,34 @@
11 11  * **Common Commands:** They should be available for each sensor, such as: change uplink interval, reset device.
12 12  * **Sensor Related Commands:** Only for special sensor, such as control relay, poll RS485 device.
13 13  
14 -(((
15 15  **This page shows the common commands since Dragino LoRaWAN stack DR-LWS-005. Make sure the end node support stack higher than DR-LWS-005 before checking this page.**
16 16  
17 -)))
18 18  
19 19  = 2. How to use AT Commands or Downlink command =
20 20  
21 21  * For AT Command , See Devices User Manual for Device. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
22 22  * For LoRaWAN Downlink: The gateway transfer downlink command in HEX format. This page shows the HEX format downlink code for each command. but some servers use base64 as downlink code. Below are reference for how to use downlink command:
23 -** Use HEX format to send a downlink: [[TTN v3>>Notes for TTN]]
24 -** Use Base64 format to send a downlink: [[Chirpstack>>Notes for ChirpStack]]
25 -** See use note for more serves [[Servers Note>>doc:Main.WebHome]](IoT LoRaWAN Server)
20 +** Use HEX format to send a downlink: [[TTN v3>>url:https://wiki.dragino.com/index.php/Notes_for_TTN#Send_Downlink_message]]
21 +** Use Base64 format to send a downlink: [[Chirpstack>>url:https://wiki.dragino.com/index.php/Notes_for_ChirpStack#Downlink]].
22 +** See use note for more serves [[Servers Note>>url:https://wiki.dragino.com/index.php/Main_Page#Use_Note_for_Server]]
26 26  
27 -
28 -
29 29  = 3. Support End Node and firmware version =
30 30  
31 -(% border="1" style="background-color:#ffffcc; color:green; width:966px" %)
32 -|=(% colspan="3" style="width: 963px;" %)(((
33 -Dragino STM32 base hardware Firmware / LoRaWAN stack list
34 -)))
35 -|(% style="width:187px" %)(((
36 -**Model**
37 -)))|(% style="width:330px" %)(((
38 -**Description**
39 -)))|(% style="width:445px" %)(((
40 -**Firmware Version <~-~-> Stack Version**
41 -)))
42 -|(% style="width:187px" %)(((
43 -[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],
44 -)))|(% style="width:330px" %)(((
45 -Open Source Generic LoRaWAN Sensor Node
46 -)))|(% style="width:445px" %)(((
47 -(((
48 -LSN50 v1.6.0 <~-~-> DR-LWS-003;
49 -)))
50 -
51 -(((
52 -(((
26 +(% style="background-color:#ffffcc; color:green; width:995.222px" %)
27 +|=(% colspan="3" style="width: 992px;" %)Dragino STM32 base hardware Firmware / LoRaWAN stack list
28 +|(% style="width:187px" %)**Model**|(% style="width:349px" %)**Description**|(% style="width:453px" %)**Firmware Version <~-~-> Stack Version**
29 +|(% style="width:187px" %)[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],|(% style="width:349px" %)Open Source Generic LoRaWAN Sensor Node|(% style="width:453px" %)LSN50 v1.6.0 <~-~-> DR-LWS-003;(((
53 53  LSN50 v1.7.0 <~-~-> DR-LWS-005; ~-~-> Support since this version
54 54  )))
55 -)))
56 -)))
57 -|(% style="width:187px" %)(((
58 -[[LGT92>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/142-lgt-92.html]],
59 -)))|(% style="width:330px" %)(((
60 -LoRaWAN GPS Tracker
61 -)))|(% style="width:445px" %)(((
62 -(((
63 -LGT92 v1.6.3 <~-~-> DR-LWS-003;
64 -)))
65 -
66 -(((
67 -(((
32 +|(% style="width:187px" %)[[LGT92>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/142-lgt-92.html]],|(% style="width:349px" %)LoRaWAN GPS Tracker|(% style="width:453px" %)LGT92 v1.6.3 <~-~-> DR-LWS-003;(((
68 68  LGT92 v1.6.4 <~-~-> DR-LWS-005;~-~-> Support since this version
69 69  )))
70 -)))
71 -)))
72 -|(% style="width:187px" %)(((
73 -[[LBT1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/165-lbt1.html]],
74 -)))|(% style="width:330px" %)(((
75 -LoRaWAN BLE Indoor Tracker
76 -)))|(% style="width:445px" %)(((
77 -LBT1 v1.0 <~-~-> DR-LWS-005;
78 -)))
79 -|(% style="width:187px" %)(((
80 -[[RS485-LN>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/154-rs485-ln.html]],
81 -)))|(% style="width:330px" %)(((
82 -LoRaWAN RS485 Modbus Converter
83 -)))|(% style="width:445px" %)(((
84 -RS485-LN v1.3 <~-~-> DR-LWS-005;
85 -)))
86 -|(% style="width:187px" %)(((
87 -[[LHT65>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/151-lht65.html]],
88 -)))|(% style="width:330px" %)(((
89 -LoRaWAN Temperature & Humidity Sensor
90 -)))|(% style="width:445px" %)(((
91 -(((
92 -LHT65 v1.7 <~-~-> DR-LWS-003;
93 -)))
94 -
95 -(((
96 -(((
35 +|(% style="width:187px" %)[[LBT1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/165-lbt1.html]],|(% style="width:349px" %)LoRaWAN BLE Indoor Tracker|(% style="width:453px" %)LBT1 v1.0 <~-~-> DR-LWS-005;
36 +|(% style="width:187px" %)[[RS485-LN>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/154-rs485-ln.html]],|(% style="width:349px" %)LoRaWAN RS485 Modbus Converter|(% style="width:453px" %)RS485-LN v1.3 <~-~-> DR-LWS-005;
37 +|(% style="width:187px" %)[[LHT65>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/151-lht65.html]],|(% style="width:349px" %)LoRaWAN Temperature & Humidity Sensor|(% style="width:453px" %)LHT65 v1.7 <~-~-> DR-LWS-003;(((
97 97  LHT65 v1.8.0 <~-~-> DR-LWS-005;~-~-> Support since this version
98 98  )))
99 -)))
100 -)))
101 101  
102 -
103 -
104 104  = 4. System Management Commands =
105 105  
106 106  == 4.1 Change Uplink Interval ==
... ... @@ -112,7 +112,7 @@
112 112  **AT Command: AT+TDC**
113 113  )))
114 114  
115 -(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
52 +(% style="background-color:#ffffcc; color:green; width:727.222px" %)
116 116  |=(% colspan="3" style="width: 724px;" %)AT+TDC
117 117  |(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
118 118  |(% style="width:165px" %)AT+TDC=?|(% style="width:227px" %)Show current transmit Interval|(% style="width:329px" %)30000(((
... ... @@ -128,19 +128,13 @@
128 128  **Downlink Command: 0x01**
129 129  {{/info}}
130 130  
131 -(((
132 132  Format: Command Code (0x01) followed by 3 bytes time value.
133 -)))
134 134  
135 -(((
136 136  If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
137 -)))
138 138  
139 139  * **Example 1**: Downlink Payload:** 0100001E** ~/~/ Set Transmit Interval (TDC) = 30 seconds
140 140  * **Example 2**: Downlink Payload:** 0100003C** ~/~/ Set Transmit Interval (TDC) = 60 seconds
141 141  
142 -
143 -
144 144  == 4.2 Reboot End Node ==
145 145  
146 146  Feature: Reboot End Node to perform a new OTAA or ABP Join.
... ... @@ -149,7 +149,7 @@
149 149  **AT Command: ATZ**
150 150  {{/info}}
151 151  
152 -(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
83 +(% border="0" style="background-color:#ffffcc; color:green; width:727.222px" %)
153 153  |=(% colspan="3" %)ATZ: Trig a reset of the MCU
154 154  |**Command Example**|**Function**|**Response**
155 155  |ATZ|Reset MCU|(((
... ... @@ -170,16 +170,10 @@
170 170  **Downlink Command: 0x04**
171 171  {{/info}}
172 172  
173 -(((
174 174  Format: Command Code (0x04) followed by FF.
175 -)))
176 176  
177 -(((
178 178  If the downlink payload=**04FF**, the end node will reboot.
179 179  
180 -
181 -)))
182 -
183 183  == 4.3 Reset to factory Default ==
184 184  
185 185  Feature: Reset the parameters to Factory Default, factory default value depends on the firmware settings, the OTAA and ABP keys will reserve after this command.
... ... @@ -188,7 +188,7 @@
188 188  **AT Command: AT+FDR**
189 189  {{/info}}
190 190  
191 -(% border="1" style="background-color:#ffffcc; color:green; width:831.222px" %)
116 +(% style="background-color:#ffffcc; color:green; width:831.222px" %)
192 192  |=(% colspan="3" style="width: 828px;" %)Reset to factory default
193 193  |(% style="width:181px" %)**Command Example**|(% style="width:181px" %)**Function**|(% style="width:465px" %)**Response**
194 194  |(% style="width:181px" %)AT+FDR|(% style="width:181px" %)Reset to factory default|(% style="width:465px" %)(((
... ... @@ -209,13 +209,9 @@
209 209  **Downlink Command: 0x04**
210 210  {{/info}}
211 211  
212 -(((
213 213  Format: Command Code (0x04) followed by FE.
214 -)))
215 215  
216 -(((
217 217  If the downlink payload=**04FE**, Reset Parameters to Factory Default, Keys Reserve.
218 -)))
219 219  
220 220  
221 221  == 4.4 Show Firmware Version ==
... ... @@ -226,10 +226,10 @@
226 226  **AT Command: AT+VER**
227 227  {{/info}}
228 228  
229 -(% border="1" style="background-color:#ffffcc; color:green; width:586px" %)
230 -|=(% colspan="3" style="width: 583px;" %)AT+VER: Image Version and Frequency Band
231 -|(% style="width:170px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:113px" %)**Response**
232 -|(% style="width:170px" %)AT+VER=?|(% style="width:300px" %)Show Image version and Frequency Band|(% style="width:113px" %)(((
150 +(% style="background-color:#ffffcc; color:green" %)
151 +|=(% colspan="3" %)AT+VER: Image Version and Frequency Band
152 +|**Command Example**|**Function**|**Response**
153 +|AT+VER=?|Show Image version and Frequency Band|(((
233 233  1.3 EU868
234 234  
235 235  OK
... ... @@ -239,25 +239,17 @@
239 239  **Downlink Command: 0x26 (Valid in 006 stack)**
240 240  {{/info}}
241 241  
242 -(((
243 243  Downlink Format: 0x26
244 -)))
245 245  
246 -(((
247 247  Device will reply with firmware version info, device info. frequency band info. detail please check device user manual. Total 5 bytes Example: If device is of firmware version 1.1.0 Upload: xx ~-~- yy ~-~- zz ~-~- 110 total 5 bytes
248 -)))
249 249  
250 -(((
251 251  **xx: Software Type:**
252 -)))
253 253  
254 254  * 0x00 01: LGT92 Version
255 255  * 0x00 02: LBT1
256 256  * 0x00 03: LSE01/LDDS75/LDDS20/LSPH01/LLMS01/LSNPK01
257 257  
258 -(((
259 259  **yy: Frequency Band:**
260 -)))
261 261  
262 262  * 0x01: EU868
263 263  * 0x02: US915
... ... @@ -270,9 +270,7 @@
270 270  * 0x09: AS923-2
271 271  * 0xa0: AS923-3
272 272  
273 -(((
274 274  **zz: Subband**
275 -)))
276 276  
277 277  firmware version: v1.1.0 ~-~-> 110
278 278  
... ... @@ -285,7 +285,7 @@
285 285  **AT Command: AT+CFG**
286 286  {{/info}}
287 287  
288 -(% border="1" style="background-color:#ffffcc; color:green; width:599.222px" %)
199 +(% style="background-color:#ffffcc; color:green; width:599.222px" %)
289 289  |=(% colspan="3" style="width: 596px;" %)AT+CFG: Print all configurations
290 290  |(% style="width:160px" %)**Command Example**|(% style="width:154px" %)**Function**|(% style="width:280px" %)**Response**
291 291  |(% style="width:160px" %)AT+CFG|(% style="width:154px" %)Show all configures|(% style="width:280px" %)(((
... ... @@ -302,8 +302,6 @@
302 302  OK
303 303  )))
304 304  
305 -
306 -
307 307  = 5. Keys, IDs and EUIs management =
308 308  
309 309  == 5.1 Application EUI ==
... ... @@ -314,7 +314,7 @@
314 314  **AT Command: AT+APPEUI**
315 315  {{/info}}
316 316  
317 -(% border="1" style="background-color:#ffffcc; color:green; width:686.222px" %)
226 +(% style="background-color:#ffffcc; color:green; width:686.222px" %)
318 318  |=(% colspan="3" style="width: 683px;" %)AT+APPEUI
319 319  |(% style="width:305px" %)**Command Example**|(% style="width:186px" %)**Function**|(% style="width:191px" %)**Response**
320 320  |(% style="width:305px" %)AT+APPEUI=?|(% style="width:186px" %)Get the Application EUI|(% style="width:191px" %)00 b3 d5 00 00 00 00 00(((
... ... @@ -322,8 +322,6 @@
322 322  )))
323 323  |(% style="width:305px" %)AT+APPEUI=00 b3 d5 7e f0 00 4d 34|(% style="width:186px" %)Set the Application EUI|(% style="width:191px" %)OK
324 324  
325 -
326 -
327 327  == 5.2 Application Key ==
328 328  
329 329  Feature: Get or Set the Application Key.
... ... @@ -332,7 +332,7 @@
332 332  **AT Command: AT+APPKEY**
333 333  {{/info}}
334 334  
335 -(% border="1" style="background-color:#ffffcc; color:green; width:976.222px" %)
242 +(% style="background-color:#ffffcc; color:green; width:976.222px" %)
336 336  |=(% colspan="3" style="width: 973px;" %)AT+APPKEY
337 337  |(% style="width:441px" %)**Command Example**|(% style="width:180px" %)**Function**|(% style="width:350px" %)**Response**
338 338  |(% style="width:441px" %)AT+APPKEY=?|(% style="width:180px" %)Get the Application Key|(% style="width:350px" %)00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35(((
... ... @@ -340,8 +340,6 @@
340 340  )))
341 341  |(% style="width:441px" %)AT+APPKEY=00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35|(% style="width:180px" %)Set the Application Key|(% style="width:350px" %)OK
342 342  
343 -
344 -
345 345  == 5.3 Application Session Key ==
346 346  
347 347  Feature: Get or Set the Application Session Key.
... ... @@ -350,7 +350,7 @@
350 350  **AT Command: AT+APPSKEY**
351 351  {{/info}}
352 352  
353 -(% border="1" style="background-color:#ffffcc; color:green; width:1040.22px" %)
258 +(% style="background-color:#ffffcc; color:green; width:1040.22px" %)
354 354  |=(% colspan="3" style="width: 1037px;" %)AT+APPSKEY
355 355  |(% style="width:451px" %)**Command Example**|(% style="width:231px" %)**Function**|(% style="width:354px" %)**Response**
356 356  |(% style="width:451px" %)AT+APPSKEY=?|(% style="width:231px" %)Get the Application Session Key|(% style="width:354px" %)00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2(((
... ... @@ -360,8 +360,6 @@
360 360  OK
361 361  )))
362 362  
363 -
364 -
365 365  == 5.4 Device Address ==
366 366  
367 367  Feature: Get or Set the Device Address.
... ... @@ -370,7 +370,7 @@
370 370  **AT Command: AT+DADDR**
371 371  {{/info}}
372 372  
373 -(% border="1" style="background-color:#ffffcc; color:green; width:795.222px" %)
276 +(% style="background-color:#ffffcc; color:green; width:795.222px" %)
374 374  |=(% colspan="3" style="width: 792px;" %)AT+DADDR
375 375  |(% style="width:192px" %)**Command Example**|(% style="width:241px" %)**Function**|(% style="width:359px" %)**Response**
376 376  |(% style="width:192px" %)AT+DADDR=?|(% style="width:241px" %)Get the Application Session Key.|(% style="width:359px" %)(While Error in format, return AT_PARAM_ERROR)(((
... ... @@ -380,8 +380,6 @@
380 380  )))
381 381  |(% style="width:192px" %)AT+DADDR=A8 40 41 FF|(% style="width:241px" %)Set the Application Session Key.|(% style="width:359px" %)OK
382 382  
383 -
384 -
385 385  == 5.5 Device EUI ==
386 386  
387 387  Feature: Get or Set the Device EUI.
... ... @@ -390,7 +390,7 @@
390 390  **AT Command: AT+DEUI**
391 391  {{/info}}
392 392  
393 -(% border="1" style="background-color:#ffffcc; color:green; width:1035.22px" %)
294 +(% style="background-color:#ffffcc; color:green; width:1035.22px" %)
394 394  |=(% colspan="3" style="width: 1032px;" %)AT+DEUI
395 395  |(% style="width:250px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:634px" %)**Response**
396 396  |(% style="width:250px" %)AT+DEUI=?|(% style="width:147px" %)Get the Device EUI.|(% style="width:634px" %)00 44 34 22 33 45 55 55(((
... ... @@ -400,8 +400,6 @@
400 400  OK
401 401  )))
402 402  
403 -
404 -
405 405  == 5.6 Network ID ==
406 406  
407 407  Feature: Get or Set the Network ID.(You can enter this command change only after successful network connection)
... ... @@ -410,7 +410,7 @@
410 410  **AT Command: AT+NWKID**
411 411  {{/info}}
412 412  
413 -(% border="1" style="background-color:#ffffcc; color:green; width:448.222px" %)
312 +(% style="background-color:#ffffcc; color:green; width:448.222px" %)
414 414  |=(% colspan="3" style="width: 445px;" %)AT+NWKID
415 415  |(% style="width:191px" %)**Command Example**|(% style="width:153px" %)**Function**|(% style="width:101px" %)**Response**
416 416  |(% style="width:191px" %)AT+NWKID=?|(% style="width:153px" %)Get the Network ID.|(% style="width:101px" %)a8 40 41 ff(((
... ... @@ -418,8 +418,6 @@
418 418  )))
419 419  |(% style="width:191px" %)AT+NWKID=A8 40 41 FF|(% style="width:153px" %)Set the Network ID.|(% style="width:101px" %)OK
420 420  
421 -
422 -
423 423  == 5.7 Network Session Key ==
424 424  
425 425  Feature: Get or Set the Network Session Key
... ... @@ -428,7 +428,7 @@
428 428  **AT Command: AT+NWKSKEY**
429 429  {{/info}}
430 430  
431 -(% border="1" style="background-color:#ffffcc; color:green; width:1017.22px" %)
328 +(% style="background-color:#ffffcc; color:green; width:1017.22px" %)
432 432  |=(% colspan="3" style="width: 1014px;" %)AT+NWKSKEY
433 433  |(% style="width:455px" %)**Command Example**|(% style="width:215px" %)**Function**|(% style="width:343px" %)**Response**
434 434  |(% style="width:455px" %)AT+NWKSKEY=?|(% style="width:215px" %)Get the Network Session Key.|(% style="width:343px" %)00 4f 19 25 52 ce 97 09 d7 fa 84 71 db 51 02 92(((
... ... @@ -436,8 +436,6 @@
436 436  )))
437 437  |(% style="width:455px" %)AT+NWKSKEY=A8 40 41 FF FF 12 34 56 00 01 02 04 05 06 06 07|(% style="width:215px" %)Set the Network Session Key.|(% style="width:343px" %)OK
438 438  
439 -
440 -
441 441  = 6. Joining and sending date on LoRaWAN network =
442 442  
443 443  == 6.1 Confirm Mode ==
... ... @@ -448,7 +448,7 @@
448 448  **AT Command: AT+CFM**
449 449  {{/info}}
450 450  
451 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
346 +(% style="background-color:#ffffcc; color:green; width:710.222px" %)
452 452  |=(% colspan="3" style="width: 707px;" %)AT+CFM
453 453  |(% style="width:155px" %)**Command Example**|(% style="width:205px" %)**Function**|(% style="width:346px" %)**Response**
454 454  |(% style="width:155px" %)AT+CFM=?|(% style="width:205px" %)Get the confirmation mode|(% style="width:346px" %)0(((
... ... @@ -466,8 +466,6 @@
466 466  * Example 1: Downlink Payload: 0501 ~/~/ Set AT+CFM=1
467 467  * Example 2: Downlink Payload: 0500 ~/~/ Set AT+CFM=0
468 468  
469 -
470 -
471 471  == 6.2 Confirm Status ==
472 472  
473 473  Feature: Get confirmation status of the last AT+SEND (0-1).
... ... @@ -476,7 +476,7 @@
476 476  **AT Command: AT+CFS**
477 477  {{/info}}
478 478  
479 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
372 +(% style="background-color:#ffffcc; color:green; width:534.222px" %)
480 480  |=(% colspan="3" style="width: 531px;" %)AT+CFS
481 481  |(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:178px" %)**Response**
482 482  |(% style="width:156px" %)AT+CFS=?|(% style="width:193px" %)Get confirmation status|(% style="width:178px" %)0(((
... ... @@ -483,8 +483,6 @@
483 483  OK
484 484  )))
485 485  
486 -
487 -
488 488  == 6.3 Join LoRa® Network ==
489 489  
490 490  Feature: Join network.
... ... @@ -493,7 +493,7 @@
493 493  **AT Command: AT+JOIN**
494 494  {{/info}}
495 495  
496 -(% border="1" style="background-color:#ffffcc; color:green; width:647.222px" %)
387 +(% style="background-color:#ffffcc; color:green; width:647.222px" %)
497 497  |=(% colspan="3" style="width: 644px;" %)AT+JOIN
498 498  |(% style="width:163px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:334px" %)**Response**
499 499  |(% style="width:163px" %)AT+JOIN ?|(% style="width:147px" %)Get imformation.|(% style="width:334px" %)AT+JOIN: Join network(((
... ... @@ -502,8 +502,6 @@
502 502  While Error in format, return AT_BUSY_ERROR
503 503  )))
504 504  
505 -
506 -
507 507  == 6.4 LoRa® Network Join Mode ==
508 508  
509 509  Feature: Get or Set the Network Join Mode. (0: ABP, 1: OTAA).
... ... @@ -512,7 +512,7 @@
512 512  **AT Command: AT+NJM**
513 513  {{/info}}
514 514  
515 -(% border="1" style="background-color:#ffffcc; color:green; width:753.222px" %)
404 +(% style="background-color:#ffffcc; color:green; width:753.222px" %)
516 516  |=(% colspan="3" style="width: 750px;" %)AT+NJM
517 517  |(% style="width:162px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:361px" %)**Response**
518 518  |(% style="width:162px" %)AT+NJM=?|(% style="width:227px" %)Get the Network Join Mode|(% style="width:361px" %)1(((
... ... @@ -532,8 +532,6 @@
532 532  * **Example 1: **Downlink Payload: **2000** ~/~/ Set AT+NJM=O
533 533  * **Example 2:** Downlink Payload: **2001** ~/~/ Set AT+NJM=1
534 534  
535 -
536 -
537 537  == 6.5 LoRa® Network Join Status ==
538 538  
539 539  Feature: LoRa® Network Join Status.
... ... @@ -542,7 +542,7 @@
542 542  **AT Command: AT+NJS**
543 543  {{/info}}
544 544  
545 -(% border="1" style="background-color:#ffffcc; color:green; width:498.222px" %)
432 +(% style="background-color:#ffffcc; color:green; width:498.222px" %)
546 546  |=(% colspan="3" style="width: 495px;" %)AT+NJS
547 547  |(% style="width:169px" %)**Command Example**|(% style="width:164px" %)**Function**|(% style="width:161px" %)**Response**
548 548  |(% style="width:169px" %)AT+NJS=?|(% style="width:164px" %)Get the join status.|(% style="width:161px" %)0(((
... ... @@ -549,8 +549,6 @@
549 549  OK
550 550  )))
551 551  
552 -
553 -
554 554  == 6.6 Print Last Received Data in Raw Format ==
555 555  
556 556  Feature: Print Last Received Data in Raw Format<port:data>.
... ... @@ -559,7 +559,7 @@
559 559  **AT Command: AT+RECV**
560 560  {{/info}}
561 561  
562 -(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
447 +(% style="background-color:#ffffcc; color:green; width:587.222px" %)
563 563  |=(% colspan="3" style="width: 584px;" %)AT+RECV
564 564  |(% style="width:161px" %)**Command Example**|(% style="width:272px" %)**Function**|(% style="width:150px" %)**Response**
565 565  |(% style="width:161px" %)AT+RECV=?|(% style="width:272px" %)print last received data in raw format.|(% style="width:150px" %)0:(((
... ... @@ -566,8 +566,6 @@
566 566  OK
567 567  )))
568 568  
569 -
570 -
571 571  == 6.7 Print Last Received Data in Binary Format ==
572 572  
573 573  Feature: Print Last Received Data in Binary Format<port:data>.
... ... @@ -576,7 +576,7 @@
576 576  **AT Command: AT+RECVB**
577 577  {{/info}}
578 578  
579 -(% border="1" style="background-color:#ffffcc; color:green; width:793.222px" %)
462 +(% style="background-color:#ffffcc; color:green; width:793.222px" %)
580 580  |=(% colspan="3" style="width: 790px;" %)AT+RECVB
581 581  |(% style="width:173px" %)**Command Example**|(% style="width:497px" %)**Function**|(% style="width:120px" %)**Response**
582 582  |(% style="width:173px" %)AT+RECVB=?|(% style="width:497px" %)print last received data in binary format (with hexadecimal values).|(% style="width:120px" %)2: 0010(((
... ... @@ -583,8 +583,6 @@
583 583  OK
584 584  )))
585 585  
586 -
587 -
588 588  == 6.8 Send Text Data ==
589 589  
590 590  Feature: Send Text Data<port:data>.
... ... @@ -593,7 +593,7 @@
593 593  **AT Command: AT+SEND**
594 594  {{/info}}
595 595  
596 -(% border="1" style="background-color:#ffffcc; color:green; width:991.222px" %)
477 +(% style="background-color:#ffffcc; color:green; width:991.222px" %)
597 597  |=(% colspan="3" style="width: 988px;" %)AT+SEND
598 598  |(% style="width:201px" %)**Command Example**|(% style="width:340px" %)**Function**|(% style="width:446px" %)**Response**
599 599  |(% style="width:201px" %)AT+SEND=12:hello world|(% style="width:340px" %)Send text data along with the application port.|(% style="width:446px" %)OK(((
... ... @@ -604,8 +604,6 @@
604 604  
605 605  )))
606 606  
607 -
608 -
609 609  == 6.9 Send Hexadecimal Data ==
610 610  
611 611  Feature: Send hexadecimal data along with the application port.
... ... @@ -614,7 +614,7 @@
614 614  **AT Command: AT+SENDB**
615 615  {{/info}}
616 616  
617 -(% border="1" style="background-color:#ffffcc; color:green; width:1120.22px" %)
496 +(% style="background-color:#ffffcc; color:green; width:1120.22px" %)
618 618  |=(% colspan="3" style="width: 1117px;" %)AT+SENDB
619 619  |(% style="width:257px" %)**Command Example**|(% style="width:406px" %)**Function**|(% style="width:453px" %)**Response**
620 620  |(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)OK
... ... @@ -624,8 +624,6 @@
624 624  
625 625  )))
626 626  
627 -
628 -
629 629  = 7. LoRaWAN network management =
630 630  
631 631  == 7.1 Adaptive Data Rate ==
... ... @@ -636,7 +636,7 @@
636 636  **AT Command: AT+ADR**
637 637  {{/info}}
638 638  
639 -(% border="1" style="background-color:#ffffcc; color:green; width:683.222px" %)
516 +(% style="background-color:#ffffcc; color:green; width:683.222px" %)
640 640  |=(% colspan="3" style="width: 680px;" %)AT+ADR
641 641  |(% style="width:162px" %)**Command Example**|(% style="width:266px" %)**Function**|(% style="width:250px" %)**Response**
642 642  |(% style="width:162px" %)AT+ADR=?|(% style="width:266px" %)Get the Adaptive Data Rate setting.|(% style="width:250px" %)1(((
... ... @@ -657,8 +657,6 @@
657 657  * **Example 1**: Downlink Payload: **2201** ~/~/ Set AT+ADR=1.
658 658  * **Example 2**: Downlink Payload: **2200FFFF** ~/~/ Set AT+ADR=0.
659 659  
660 -
661 -
662 662  == 7.2 LoRa® Class ==
663 663  
664 664  Feature: Get or Set the Device Class(Currently only support class A, class C).
... ... @@ -667,7 +667,7 @@
667 667  **AT Command:AT+CLASS**
668 668  {{/info}}
669 669  
670 -(% border="1" style="background-color:#ffffcc; color:green; width:507.222px" %)
545 +(% style="background-color:#ffffcc; color:green; width:507.222px" %)
671 671  |=(% colspan="3" style="width: 504px;" %)AT+CLASS
672 672  |(% style="width:163px" %)**Command Example**|(% style="width:166px" %)**Function**|(% style="width:175px" %)**Response**
673 673  |(% style="width:163px" %)AT+CLASS=?|(% style="width:166px" %)Get the Device Class.|(% style="width:175px" %)A(((
... ... @@ -677,8 +677,6 @@
677 677  
678 678  )))
679 679  
680 -
681 -
682 682  == 7.3 Duty Cycle Setting ==
683 683  
684 684  Feature: Get or Set the ETSI Duty Cycle setting - 0=disable, 1=enable - Only for testing.
... ... @@ -687,7 +687,7 @@
687 687  **AT Command:AT+DCS**
688 688  {{/info}}
689 689  
690 -(% border="1" style="background-color:#ffffcc; color:green; width:515.222px" %)
563 +(% style="background-color:#ffffcc; color:green; width:515.222px" %)
691 691  |=(% colspan="3" style="width: 512px;" %)AT+DCS
692 692  |(% style="width:165px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:107px" %)**Response**
693 693  |(% style="width:165px" %)AT+DCS=?|(% style="width:239px" %)Get the ETSI Duty Cycle setting.|(% style="width:107px" %)1(((
... ... @@ -697,8 +697,6 @@
697 697  
698 698  )))
699 699  
700 -
701 -
702 702  == 7.4 Data Rate ==
703 703  
704 704  Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) . Note: while set Data Rate, please use set Adptive Data Rate, ADR=0 first. otherwise device will response to server's ADR command and change the DR to the setting from server
... ... @@ -707,7 +707,7 @@
707 707  **AT Command: AT+DR**
708 708  {{/info}}
709 709  
710 -(% border="1" style="background-color:#ffffcc; color:green; width:466.222px" %)
581 +(% style="background-color:#ffffcc; color:green; width:466.222px" %)
711 711  |=(% colspan="3" style="width: 463px;" %)AT+DR
712 712  |(% style="width:156px" %)**Command Example**|(% style="width:167px" %)**Function**|(% style="width:140px" %)**Response**
713 713  |(% style="width:156px" %)AT+DR=?|(% style="width:167px" %)Get the Data Rate.|(% style="width:140px" %)5(((
... ... @@ -727,8 +727,6 @@
727 727  * **Example 1**: Downlink Payload: **220001FF** ~/~/ Set AT+DR=1.
728 728  * **Example 2**: Downlink Payload: **220000FF** ~/~/ Set AT+DR=0.
729 729  
730 -
731 -
732 732  == 7.5 Frame Counter Downlink ==
733 733  
734 734  Feature: Get or Set the Frame Counter Downlink.
... ... @@ -737,7 +737,7 @@
737 737  **AT Command:AT+FCD**
738 738  {{/info}}
739 739  
740 -(% border="1" style="background-color:#ffffcc; color:green; width:693.222px" %)
609 +(% style="background-color:#ffffcc; color:green; width:693.222px" %)
741 741  |=(% colspan="3" style="width: 690px;" %)AT+FCD
742 742  |(% style="width:162px" %)**Command Example**|(% style="width:258px" %)**Function**|(% style="width:269px" %)**Response**
743 743  |(% style="width:162px" %)AT+FCD=?|(% style="width:258px" %)Get the Frame Counter Downlink.|(% style="width:269px" %)0(((
... ... @@ -749,8 +749,6 @@
749 749  
750 750  )))
751 751  
752 -
753 -
754 754  == 7.6 Frame Counter Uplink ==
755 755  
756 756  Feature: Get or Set the Frame Counter Uplink.
... ... @@ -759,7 +759,7 @@
759 759  **AT Command:AT+FCU**
760 760  {{/info}}
761 761  
762 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
629 +(% style="background-color:#ffffcc; color:green; width:534.222px" %)
763 763  |=(% colspan="3" style="width: 531px;" %)AT+FCU
764 764  |(% style="width:177px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:113px" %)**Response**
765 765  |(% style="width:177px" %)AT+FCU=?|(% style="width:239px" %)Get the Frame Counter Uplink.|(% style="width:113px" %)0(((
... ... @@ -769,8 +769,6 @@
769 769  
770 770  )))
771 771  
772 -
773 -
774 774  == 7.7 Join Accept Delay1 ==
775 775  
776 776  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 1 in ms.
... ... @@ -779,7 +779,7 @@
779 779  **AT Command:AT+JN1DL**
780 780  {{/info}}
781 781  
782 -(% border="1" style="background-color:#ffffcc; color:green; width:537.222px" %)
647 +(% style="background-color:#ffffcc; color:green; width:537.222px" %)
783 783  |=(% colspan="3" style="width: 534px;" %)AT+JN1DL
784 784  |(% style="width:164px" %)**Command Example**|(% style="width:229px" %)**Function**|(% style="width:140px" %)**Response**
785 785  |(% style="width:164px" %)AT+JN1DL=?|(% style="width:229px" %)Get the Join Accept Delay.|(% style="width:140px" %)5000(((
... ... @@ -789,8 +789,6 @@
789 789  
790 790  )))
791 791  
792 -
793 -
794 794  == 7.8 Join Accept Delay2 ==
795 795  
796 796  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 2 in ms.
... ... @@ -799,7 +799,7 @@
799 799  **AT Command:AT+JN2DL**
800 800  {{/info}}
801 801  
802 -(% border="1" style="background-color:#ffffcc; color:green; width:538.222px" %)
665 +(% style="background-color:#ffffcc; color:green; width:538.222px" %)
803 803  |=(% colspan="3" style="width: 535px;" %)AT+JN2DL
804 804  |(% style="width:160px" %)**Command Example**|(% style="width:228px" %)**Function**|(% style="width:146px" %)**Response**
805 805  |(% style="width:160px" %)AT+JN2DL=?|(% style="width:228px" %)Get the Join Accept Delay.|(% style="width:146px" %)6000(((
... ... @@ -809,8 +809,6 @@
809 809  
810 810  )))
811 811  
812 -
813 -
814 814  == 7.9 Public Network Mode ==
815 815  
816 816  Feature: Get or Set the public network mode. (0: off, 1: on)
... ... @@ -819,7 +819,7 @@
819 819  **AT Command:AT+PNM**
820 820  {{/info}}
821 821  
822 -(% border="1" style="background-color:#ffffcc; color:green; width:667.222px" %)
683 +(% style="background-color:#ffffcc; color:green; width:667.222px" %)
823 823  |=(% colspan="3" style="width: 664px;" %)AT+PNM
824 824  |(% style="width:166px" %)**Command Example**|(% style="width:225px" %)**Function**|(% style="width:272px" %)**Response**
825 825  |(% style="width:166px" %)AT+PNM=?|(% style="width:225px" %)Get the public network mode.|(% style="width:272px" %)1(((
... ... @@ -831,8 +831,6 @@
831 831  
832 832  )))
833 833  
834 -
835 -
836 836  == 7.10 Receive Delay1 ==
837 837  
838 838  Feature: Get or Set the delay between the end of the Tx and the Rx Window 1 in ms
... ... @@ -841,7 +841,7 @@
841 841  **AT Command:AT+RX1DL**
842 842  {{/info}}
843 843  
844 -(% border="1" style="background-color:#ffffcc; color:green; width:408.222px" %)
703 +(% style="background-color:#ffffcc; color:green; width:408.222px" %)
845 845  |=(% colspan="3" style="width: 405px;" %)AT+RX1DL
846 846  |(% style="width:155px" %)**Command Example**|(% style="width:128px" %)**Function**|(% style="width:122px" %)**Response**
847 847  |(% style="width:155px" %)AT+RX1DL=?|(% style="width:128px" %)Get the delay.|(% style="width:122px" %)1000(((
... ... @@ -851,7 +851,7 @@
851 851  
852 852  )))
853 853  
854 -== 7.11 Receive Delay2 ==
713 +== 7.11Receive Delay2 ==
855 855  
856 856  Feature: Get or Set the delay between the end of the Tx and the Rx Window 2 in ms
857 857  
... ... @@ -859,7 +859,7 @@
859 859  **AT Command:AT+RX2DL**
860 860  {{/info}}
861 861  
862 -(% border="1" style="background-color:#ffffcc; color:green; width:481.222px" %)
721 +(% style="background-color:#ffffcc; color:green; width:481.222px" %)
863 863  |=(% colspan="3" style="width: 478px;" %)AT+RX2DL
864 864  |(% style="width:175px" %)**Command Example**|(% style="width:152px" %)**Function**|(% style="width:150px" %)**Response**
865 865  |(% style="width:175px" %)AT+RX2DL=?|(% style="width:152px" %)Get the delay.|(% style="width:150px" %)2000(((
... ... @@ -877,7 +877,7 @@
877 877  **AT Command:AT+RX2DR**
878 878  {{/info}}
879 879  
880 -(% border="1" style="background-color:#ffffcc; color:green; width:525.222px" %)
739 +(% style="background-color:#ffffcc; color:green; width:525.222px" %)
881 881  |=(% colspan="3" style="width: 522px;" %)AT+RX2DR
882 882  |(% style="width:160px" %)**Command Example**|(% style="width:232px" %)**Function**|(% style="width:130px" %)**Response**
883 883  |(% style="width:160px" %)AT+RX2DR=?|(% style="width:232px" %)Get the Rx2 window data rate.|(% style="width:130px" %)2(((
... ... @@ -895,7 +895,7 @@
895 895  **AT Command:AT+RX2FQ**
896 896  {{/info}}
897 897  
898 -(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
757 +(% style="background-color:#ffffcc; color:green; width:587.222px" %)
899 899  |=(% colspan="3" style="width: 584px;" %)AT+RX2FQ
900 900  |(% style="width:183px" %)**Command Example**|(% style="width:240px" %)**Function**|(% style="width:160px" %)**Response**
901 901  |(% style="width:183px" %)AT+RX2FQ=?|(% style="width:240px" %)Get the Rx2 window frequency.|(% style="width:160px" %)434665000(((
... ... @@ -913,7 +913,7 @@
913 913  **AT Command:AT+TXP**
914 914  {{/info}}
915 915  
916 -(% border="1" style="background-color:#ffffcc; color:green; width:465.222px" %)
775 +(% style="background-color:#ffffcc; color:green; width:465.222px" %)
917 917  |=(% colspan="3" style="width: 462px;" %)AT+TXP
918 918  |(% style="width:161px" %)**Command Example**|(% style="width:189px" %)**Function**|(% style="width:112px" %)**Response**
919 919  |(% style="width:161px" %)AT+TXP=?|(% style="width:189px" %)Get the Transmit Power.|(% style="width:112px" %)0(((
... ... @@ -938,7 +938,7 @@
938 938  **AT Command:AT+RSSI**
939 939  {{/info}}
940 940  
941 -(% border="1" style="background-color:#ffffcc; color:green; width:557.222px" %)
800 +(% style="background-color:#ffffcc; color:green; width:557.222px" %)
942 942  |=(% colspan="3" style="width: 554px;" %)AT+RSSI
943 943  |(% style="width:164px" %)**Command Example**|(% style="width:289px" %)**Function**|(% style="width:100px" %)**Response**
944 944  |(% style="width:164px" %)AT+RSSI=?|(% style="width:289px" %)Get the RSSI of the last received packet.|(% style="width:100px" %)0(((
... ... @@ -953,7 +953,7 @@
953 953  **AT Command:AT+SNR**
954 954  {{/info}}
955 955  
956 -(% border="1" style="background-color:#ffffcc; color:green; width:571.222px" %)
815 +(% style="background-color:#ffffcc; color:green; width:571.222px" %)
957 957  |=(% colspan="3" style="width: 568px;" %)AT+SNR
958 958  |(% style="width:164px" %)**Command Example**|(% style="width:290px" %)**Function**|(% style="width:113px" %)**Response**
959 959  |(% style="width:164px" %)AT+SNR=?|(% style="width:290px" %)Get the RSSI of the last received packet.|(% style="width:113px" %)0(((
... ... @@ -968,7 +968,7 @@
968 968  **AT Command: AT+PORT**
969 969  {{/info}}
970 970  
971 -(% border="1" style="background-color:#ffffcc; color:green; width:500.222px" %)
830 +(% style="background-color:#ffffcc; color:green; width:500.222px" %)
972 972  |=(% colspan="3" style="width: 497px;" %)AT+PORT
973 973  |(% style="width:157px" %)**Command Example**|(% style="width:204px" %)**Function**|(% style="width:135px" %)**Response**
974 974  |(% style="width:157px" %)AT+PORT=?|(% style="width:204px" %)Get the application port|(% style="width:135px" %)21(((
... ... @@ -995,7 +995,7 @@
995 995  **AT Command: AT+CHS**
996 996  {{/info}}
997 997  
998 -(% border="1" style="background-color:#ffffcc; color:green; width:603.222px" %)
857 +(% style="background-color:#ffffcc; color:green; width:603.222px" %)
999 999  |=(% colspan="3" style="width: 600px;" %)AT+CHS
1000 1000  |(% style="width:182px" %)**Command Example**|(% style="width:295px" %)**Function**|(% style="width:122px" %)**Response**
1001 1001  |(% style="width:182px" %)AT+CHS=?|(% style="width:295px" %)Get Frequency for Single Channel Mode|(% style="width:122px" %)0(((
... ... @@ -1011,7 +1011,7 @@
1011 1011  **AT Command: AT+CHE**
1012 1012  {{/info}}
1013 1013  
1014 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
873 +(% style="background-color:#ffffcc; color:green; width:710.222px" %)
1015 1015  |=(% colspan="3" style="width: 707px;" %)AT+CHE
1016 1016  |(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
1017 1017  |(% style="width:160px" %)AT+CHE=?|(% style="width:198px" %)Get eight channels mode|(% style="width:349px" %)1(((
... ... @@ -1040,7 +1040,7 @@
1040 1040  **AT Command: AT+RX1WTO**
1041 1041  {{/info}}
1042 1042  
1043 -(% border="1" style="background-color:#ffffcc; color:green; width:460.222px" %)
902 +(% style="background-color:#ffffcc; color:green; width:460.222px" %)
1044 1044  |=(% colspan="3" style="width: 457px;" %)AT+ RX1WTO
1045 1045  |(% style="width:163px" %)**Command Example**|(% style="width:201px" %)**Function**|(% style="width:93px" %)**Response**
1046 1046  |(% style="width:163px" %)AT+RX1WTO=?|(% style="width:201px" %)Get RXwindows1 timeout|(% style="width:93px" %)14(((
... ... @@ -1048,60 +1048,46 @@
1048 1048  )))
1049 1049  |(% style="width:163px" %)AT+RX1WTO=60|(% style="width:201px" %)Set RXwindows1 timeout|(% style="width:93px" %)OK
1050 1050  
1051 -(((
1052 -**AT+RX1TWO** is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
1053 -)))
910 +AT+RX1TWO is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
1054 1054  
1055 -[[image:image-20220526162535-1.png]]
912 +[[~[~[image:https://wiki.dragino.com/images/thumb/5/51/RX1WTO.JPG/600px-RX1WTO.JPG~|~|alt="RX1WTO.JPG" height="239" width="600"~]~]>>url:https://wiki.dragino.com/index.php/File:RX1WTO.JPG]]
1056 1056  
1057 -(((
1058 1058  Increasing thisvalue is equal to extending the time that the receiving window is opened, butthe corresponding power consumption will also increase. Properly increasingthis value can increase the success rate of the downlink.
1059 1059  
1060 -
1061 -)))
1062 -
1063 1063  == 7.21 Get or Set RXwindows2 timeout ==
1064 1064  
1065 1065  Feature:Get or Set the number of symbols to detect and timeout from RXwindow2(0 to 255).
1066 1066  
1067 -{{info}}
1068 -**AT Command: AT+RX2WTO**
1069 -{{/info}}
920 +AT Command: AT+RX2WTO
1070 1070  
1071 -(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
1072 -|=(% colspan="3" style="width: 494px;" %)AT+ RX2WTO
1073 -|(% style="width:190px" %)**Command Example**|(% style="width:199px" %)**Function**|(% style="width:104px" %)**Response**
1074 -|(% style="width:190px" %)AT+RX2WTO=?|(% style="width:199px" %)Get RXwindows2 timeout|(% style="width:104px" %)7(((
922 +|=(% colspan="3" %)AT+ RX2WTO
923 +|**Command Example**|**Function**|**Response**
924 +|AT+RX2WTO=?|Get RXwindows2 timeout|7(((
1075 1075  OK
1076 1076  )))
1077 -|(% style="width:190px" %)AT+RX2WTO=20|(% style="width:199px" %)Set RXwindows2 timeout|(% style="width:104px" %)OK
927 +|AT+RX2WTO=20|Set RXwindows2 timeout|OK
1078 1078  
1079 1079  == 7.22 Setting up uplinkdwelltime (as923, au915) ==
1080 1080  
1081 1081  Feature: Get or Set uplinkdwelltime
1082 1082  
1083 -{{info}}
1084 -**AT Command: AT+DWELLT**
1085 -{{/info}}
933 +AT Command: AT+DWELLT
1086 1086  
1087 -(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
1088 -|=(% colspan="3" style="width: 494px;" %)AT+DWELLT
1089 -|(% style="width:183px" %)**Command Example**|(% style="width:179px" %)**Function**|(% style="width:131px" %)**Response**
1090 -|(% style="width:183px" %)AT+DWELLT=?|(% style="width:179px" %)Get uplinkdwelltime|(% style="width:131px" %)1(((
935 +|=(% colspan="3" %)AT+DWELLT
936 +|**Command Example**|**Function**|**Response**
937 +|AT+DWELLT=?|Get uplinkdwelltime|1(((
1091 1091  OK
1092 1092  )))
1093 -|(% style="width:183px" %)AT+DWELLT=0|(% style="width:179px" %)Set uplinkdwelltime|(% style="width:131px" %)OK
940 +|AT+DWELLT=0|Set uplinkdwelltime|OK
1094 1094  
1095 -{{info}}
1096 -**Downlink Command: 0x25**
1097 -{{/info}}
942 +Downlink Command: 0x25
1098 1098  
1099 1099  Format: Command Code (0x25) followed by 1 bytes state value.
1100 1100  
1101 1101  If the downlink payload=2501, it means set uplinkdwelltime to 1, while type code is 25.
1102 1102  
1103 -* **Example 1**: Downlink Payload: **2501** ~/~/ set uplinkdwelltime to 1
1104 -* **Example 2**: Downlink Payload: **2500** ~/~/ set uplinkdwelltime to 0
948 +* Example 1: Downlink Payload: 2501 ~/~/ set uplinkdwelltime to 1
949 +* Example 2: Downlink Payload: 2500 ~/~/ set uplinkdwelltime to 0
1105 1105  
1106 1106  == 7.23 Set Packet Receiving Response Level ==
1107 1107  
... ... @@ -1109,11 +1109,11 @@
1109 1109  
1110 1110  RPL value:
1111 1111  
1112 -* **AT+RPL=0:** Device won't immediately reply any downlink commands from platform.
1113 -* **AT+RPL=1:** Device will immediately reply message to Unconfirmed Data Down. Payload is 0x00.
1114 -* **AT+RPL=2:** Device will immediately reply message to Confirmed Data Down. Payload is 0x00 and requied response header for this command.
1115 -* **AT+RPL=3:** Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command.
1116 -* **AT+RPL=4: **Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands.
957 +* AT+RPL=0: Device won't immediately reply any downlink commands from platform.
958 +* AT+RPL=1: Device will immediately reply message to Unconfirmed Data Down. Payload is 0x00.
959 +* AT+RPL=2: Device will immediately reply message to Confirmed Data Down. Payload is 0x00 and requied response header for this command.
960 +* AT+RPL=3: Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command.
961 +* AT+RPL=4: Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands.
1117 1117  
1118 1118  Case Analyes:
1119 1119  
... ... @@ -1121,44 +1121,37 @@
1121 1121  * For Class C devices used in ChirpStack, need to set AT+RPL=4 because Chirpstack require immedietely reply message to MAC Command.
1122 1122  * For Class C devices used in TTI, need to set AT+RPL=4 because TTI require immediately reply message to Confirmed Data Down & MAC Command.
1123 1123  
1124 -{{info}}
1125 -**AT Command: AT+RPL**
1126 -{{/info}}
969 +AT Command: AT+RPL
1127 1127  
1128 -(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1129 -|=(% colspan="3" style="width: 533px;" %)AT+RPL
1130 -|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1131 -|(% style="width:160px" %)AT+RPL=?|(% style="width:263px" %)Get packet receiving response level|(% style="width:109px" %)1(((
971 +|=(% colspan="3" %)AT+RPL
972 +|**Command Example**|**Function**|**Response**
973 +|AT+RPL=?|Get packet receiving response level|1(((
1132 1132  OK
1133 1133  )))
1134 -|(% style="width:160px" %)AT+RPL=0|(% style="width:263px" %)Set packet receiving response level|(% style="width:109px" %)OK
976 +|AT+RPL=0|Set packet receiving response level|OK
1135 1135  
1136 -{{info}}
1137 -**Downlink Command: 0x21**
1138 -{{/info}}
978 +Downlink Command: 0x21
1139 1139  
1140 1140  Format: Command Code (0x21) followed by 1 bytes level value.
1141 1141  
1142 1142  If the downlink payload=2101, it means set packet receiving response level to 1, while type code is 21.
1143 1143  
1144 -* **Example 1**: Downlink Payload: **2101** ~/~/ set packet receiving response level to 1
1145 -* **Example 2**: Downlink Payload: **2102** ~/~/ set packet receiving response level to 2
984 +* Example 1: Downlink Payload: 2101 ~/~/ set packet receiving response level to 1
985 +* Example 2: Downlink Payload: 2102 ~/~/ set packet receiving response level to 2
1146 1146  
1147 1147  = 8. AT Commands Combination =
1148 1148  
1149 1149  == 8.1 Set a fix RX2DR for downlink window ==
1150 1150  
1151 -* **AT+ADR=0 **~-~-> Disable ADR first
1152 -* **AT+RX2DR=xxxx** ~-~-> Set xxxx to your wanted DataRate
991 +* AT+ADR=0 ~-~-> Disable ADR first
992 +* AT+RX2DR=xxxx ~-~-> Set xxxx to your wanted DataRate
1153 1153  
1154 1154  == 8.2 Use Downlink Command to set a fix uplink DR ==
1155 1155  
1156 -{{info}}
1157 -**Downlink Command: 0x22000500**
1158 -{{/info}}
996 +Downlink Command: 0x22000500
1159 1159  
1160 1160  Same as:
1161 1161  
1162 -* AT+ADR=0  [[Reference>>||anchor="H7.1AdaptiveDataRate"]]
1163 -* AT+DR=5  [[Reference>>||anchor="H7.4DataRate"]]
1164 -* AT+TXP=0  [[Reference>>||anchor="H7.14TransmitPower"]]
1000 +* AT+ADR=0 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Adaptive_Data_Rate]]
1001 +* AT+DR=5 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Data_Rate]]
1002 +* AT+TXP=0 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Transmit_Power]]
image-20220511120050-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -136.3 KB
Content
image-20220526162535-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -149.4 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0