Last modified by kai on 2024/09/06 10:00
<
From version < 38.126 >
edited by Xiaoling
on 2022/06/01 11:57
To version < 7.6 >
edited by Xiaoling
on 2022/05/11 10:27
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,9 +1,8 @@
1 - **Contents：**
1 +Contens
2 2  
3 3  {{toc/}}
4 4  
5 5  
6 -
7 7  = 1. Introduction =
8 8  
9 9  Dragino LoRaWAN End Node support two types of AT Commands and Downlink Commands:
... ... @@ -11,96 +11,34 @@
11 11  * **Common Commands:** They should be available for each sensor, such as: change uplink interval, reset device.
12 12  * **Sensor Related Commands:** Only for special sensor, such as control relay, poll RS485 device.
13 13  
14 -(((
15 15  **This page shows the common commands since Dragino LoRaWAN stack DR-LWS-005. Make sure the end node support stack higher than DR-LWS-005 before checking this page.**
16 16  
17 -)))
18 18  
19 19  = 2. How to use AT Commands or Downlink command =
20 20  
21 21  * For AT Command , See Devices User Manual for Device. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
22 22  * For LoRaWAN Downlink: The gateway transfer downlink command in HEX format. This page shows the HEX format downlink code for each command. but some servers use base64 as downlink code. Below are reference for how to use downlink command:
23 -** Use HEX format to send a downlink: [[TTN v3>>Notes for TTN]]
24 -** Use Base64 format to send a downlink: [[Chirpstack>>Notes for ChirpStack]]
25 -** See use note for more serves [[Servers Note>>doc:Main.WebHome]](IoT LoRaWAN Server)
20 +** Use HEX format to send a downlink: [[TTN v3>>url:https://wiki.dragino.com/index.php/Notes_for_TTN#Send_Downlink_message]]
21 +** Use Base64 format to send a downlink: [[Chirpstack>>url:https://wiki.dragino.com/index.php/Notes_for_ChirpStack#Downlink]].
22 +** See use note for more serves [[Servers Note>>url:https://wiki.dragino.com/index.php/Main_Page#Use_Note_for_Server]]
26 26  
27 -
28 -
29 29  = 3. Support End Node and firmware version =
30 30  
31 -(% border="1" style="background-color:#ffffcc; color:green; width:966px" %)
32 -|=(% colspan="3" style="width: 963px;" %)(((
33 -Dragino STM32 base hardware Firmware / LoRaWAN stack list
34 -)))
35 -|(% style="width:187px" %)(((
36 -**Model**
37 -)))|(% style="width:330px" %)(((
38 -**Description**
39 -)))|(% style="width:445px" %)(((
40 -**Firmware Version <~-~-> Stack Version**
41 -)))
42 -|(% style="width:187px" %)(((
43 -[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],
44 -)))|(% style="width:330px" %)(((
45 -Open Source Generic LoRaWAN Sensor Node
46 -)))|(% style="width:445px" %)(((
47 -(((
48 -LSN50 v1.6.0 <~-~-> DR-LWS-003;
49 -)))
50 -
51 -(((
52 -(((
26 +(% style="background-color:#ffffcc; color:green; width:995.222px" %)
27 +|=(% colspan="3" style="width: 992px;" %)Dragino STM32 base hardware Firmware / LoRaWAN stack list
28 +|(% style="width:187px" %)**Model**|(% style="width:349px" %)**Description**|(% style="width:453px" %)**Firmware Version <~-~-> Stack Version**
29 +|(% style="width:187px" %)[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],|(% style="width:349px" %)Open Source Generic LoRaWAN Sensor Node|(% style="width:453px" %)LSN50 v1.6.0 <~-~-> DR-LWS-003;(((
53 53  LSN50 v1.7.0 <~-~-> DR-LWS-005; ~-~-> Support since this version
54 54  )))
55 -)))
56 -)))
57 -|(% style="width:187px" %)(((
58 -[[LGT92>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/142-lgt-92.html]],
59 -)))|(% style="width:330px" %)(((
60 -LoRaWAN GPS Tracker
61 -)))|(% style="width:445px" %)(((
62 -(((
63 -LGT92 v1.6.3 <~-~-> DR-LWS-003;
64 -)))
65 -
66 -(((
67 -(((
32 +|(% style="width:187px" %)[[LGT92>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/142-lgt-92.html]],|(% style="width:349px" %)LoRaWAN GPS Tracker|(% style="width:453px" %)LGT92 v1.6.3 <~-~-> DR-LWS-003;(((
68 68  LGT92 v1.6.4 <~-~-> DR-LWS-005;~-~-> Support since this version
69 69  )))
70 -)))
71 -)))
72 -|(% style="width:187px" %)(((
73 -[[LBT1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/165-lbt1.html]],
74 -)))|(% style="width:330px" %)(((
75 -LoRaWAN BLE Indoor Tracker
76 -)))|(% style="width:445px" %)(((
77 -LBT1 v1.0 <~-~-> DR-LWS-005;
78 -)))
79 -|(% style="width:187px" %)(((
80 -[[RS485-LN>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/154-rs485-ln.html]],
81 -)))|(% style="width:330px" %)(((
82 -LoRaWAN RS485 Modbus Converter
83 -)))|(% style="width:445px" %)(((
84 -RS485-LN v1.3 <~-~-> DR-LWS-005;
85 -)))
86 -|(% style="width:187px" %)(((
87 -[[LHT65>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/151-lht65.html]],
88 -)))|(% style="width:330px" %)(((
89 -LoRaWAN Temperature & Humidity Sensor
90 -)))|(% style="width:445px" %)(((
91 -(((
92 -LHT65 v1.7 <~-~-> DR-LWS-003;
93 -)))
94 -
95 -(((
96 -(((
35 +|(% style="width:187px" %)[[LBT1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/165-lbt1.html]],|(% style="width:349px" %)LoRaWAN BLE Indoor Tracker|(% style="width:453px" %)LBT1 v1.0 <~-~-> DR-LWS-005;
36 +|(% style="width:187px" %)[[RS485-LN>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/154-rs485-ln.html]],|(% style="width:349px" %)LoRaWAN RS485 Modbus Converter|(% style="width:453px" %)RS485-LN v1.3 <~-~-> DR-LWS-005;
37 +|(% style="width:187px" %)[[LHT65>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/151-lht65.html]],|(% style="width:349px" %)LoRaWAN Temperature & Humidity Sensor|(% style="width:453px" %)LHT65 v1.7 <~-~-> DR-LWS-003;(((
97 97  LHT65 v1.8.0 <~-~-> DR-LWS-005;~-~-> Support since this version
98 98  )))
99 -)))
100 -)))
101 101  
102 -
103 -
104 104  = 4. System Management Commands =
105 105  
106 106  == 4.1 Change Uplink Interval ==
... ... @@ -112,7 +112,7 @@
112 112  **AT Command: AT+TDC**
113 113  )))
114 114  
115 -(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
52 +(% style="background-color:#ffffcc; color:green; width:727.222px" %)
116 116  |=(% colspan="3" style="width: 724px;" %)AT+TDC
117 117  |(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
118 118  |(% style="width:165px" %)AT+TDC=?|(% style="width:227px" %)Show current transmit Interval|(% style="width:329px" %)30000(((
... ... @@ -128,19 +128,13 @@
128 128  **Downlink Command: 0x01**
129 129  {{/info}}
130 130  
131 -(((
132 132  Format: Command Code (0x01) followed by 3 bytes time value.
133 -)))
134 134  
135 -(((
136 136  If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
137 -)))
138 138  
139 139  * **Example 1**: Downlink Payload:** 0100001E** ~/~/ Set Transmit Interval (TDC) = 30 seconds
140 140  * **Example 2**: Downlink Payload:** 0100003C** ~/~/ Set Transmit Interval (TDC) = 60 seconds
141 141  
142 -
143 -
144 144  == 4.2 Reboot End Node ==
145 145  
146 146  Feature: Reboot End Node to perform a new OTAA or ABP Join.
... ... @@ -149,7 +149,7 @@
149 149  **AT Command: ATZ**
150 150  {{/info}}
151 151  
152 -(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
83 +(% border="0" style="background-color:#ffffcc; color:green; width:727.222px" %)
153 153  |=(% colspan="3" %)ATZ: Trig a reset of the MCU
154 154  |**Command Example**|**Function**|**Response**
155 155  |ATZ|Reset MCU|(((
... ... @@ -170,16 +170,10 @@
170 170  **Downlink Command: 0x04**
171 171  {{/info}}
172 172  
173 -(((
174 174  Format: Command Code (0x04) followed by FF.
175 -)))
176 176  
177 -(((
178 178  If the downlink payload=**04FF**, the end node will reboot.
179 179  
180 -
181 -)))
182 -
183 183  == 4.3 Reset to factory Default ==
184 184  
185 185  Feature: Reset the parameters to Factory Default, factory default value depends on the firmware settings, the OTAA and ABP keys will reserve after this command.
... ... @@ -188,7 +188,7 @@
188 188  **AT Command: AT+FDR**
189 189  {{/info}}
190 190  
191 -(% border="1" style="background-color:#ffffcc; color:green; width:831.222px" %)
116 +(% style="background-color:#ffffcc; color:green; width:831.222px" %)
192 192  |=(% colspan="3" style="width: 828px;" %)Reset to factory default
193 193  |(% style="width:181px" %)**Command Example**|(% style="width:181px" %)**Function**|(% style="width:465px" %)**Response**
194 194  |(% style="width:181px" %)AT+FDR|(% style="width:181px" %)Reset to factory default|(% style="width:465px" %)(((
... ... @@ -209,13 +209,9 @@
209 209  **Downlink Command: 0x04**
210 210  {{/info}}
211 211  
212 -(((
213 213  Format: Command Code (0x04) followed by FE.
214 -)))
215 215  
216 -(((
217 217  If the downlink payload=**04FE**, Reset Parameters to Factory Default, Keys Reserve.
218 -)))
219 219  
220 220  
221 221  == 4.4 Show Firmware Version ==
... ... @@ -226,10 +226,10 @@
226 226  **AT Command: AT+VER**
227 227  {{/info}}
228 228  
229 -(% border="1" style="background-color:#ffffcc; color:green; width:586px" %)
230 -|=(% colspan="3" style="width: 583px;" %)AT+VER: Image Version and Frequency Band
231 -|(% style="width:170px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:113px" %)**Response**
232 -|(% style="width:170px" %)AT+VER=?|(% style="width:300px" %)Show Image version and Frequency Band|(% style="width:113px" %)(((
150 +(% style="background-color:#ffffcc; color:green" %)
151 +|=(% colspan="3" %)AT+VER: Image Version and Frequency Band
152 +|**Command Example**|**Function**|**Response**
153 +|AT+VER=?|Show Image version and Frequency Band|(((
233 233  1.3 EU868
234 234  
235 235  OK
... ... @@ -239,25 +239,17 @@
239 239  **Downlink Command: 0x26 (Valid in 006 stack)**
240 240  {{/info}}
241 241  
242 -(((
243 243  Downlink Format: 0x26
244 -)))
245 245  
246 -(((
247 247  Device will reply with firmware version info, device info. frequency band info. detail please check device user manual. Total 5 bytes Example: If device is of firmware version 1.1.0 Upload: xx ~-~- yy ~-~- zz ~-~- 110 total 5 bytes
248 -)))
249 249  
250 -(((
251 251  **xx: Software Type:**
252 -)))
253 253  
254 254  * 0x00 01: LGT92 Version
255 255  * 0x00 02: LBT1
256 256  * 0x00 03: LSE01/LDDS75/LDDS20/LSPH01/LLMS01/LSNPK01
257 257  
258 -(((
259 259  **yy: Frequency Band:**
260 -)))
261 261  
262 262  * 0x01: EU868
263 263  * 0x02: US915
... ... @@ -270,9 +270,7 @@
270 270  * 0x09: AS923-2
271 271  * 0xa0: AS923-3
272 272  
273 -(((
274 274  **zz: Subband**
275 -)))
276 276  
277 277  firmware version: v1.1.0 ~-~-> 110
278 278  
... ... @@ -285,7 +285,7 @@
285 285  **AT Command: AT+CFG**
286 286  {{/info}}
287 287  
288 -(% border="1" style="background-color:#ffffcc; color:green; width:599.222px" %)
199 +(% style="background-color:#ffffcc; color:green; width:599.222px" %)
289 289  |=(% colspan="3" style="width: 596px;" %)AT+CFG: Print all configurations
290 290  |(% style="width:160px" %)**Command Example**|(% style="width:154px" %)**Function**|(% style="width:280px" %)**Response**
291 291  |(% style="width:160px" %)AT+CFG|(% style="width:154px" %)Show all configures|(% style="width:280px" %)(((
... ... @@ -303,7 +303,6 @@
303 303  )))
304 304  
305 305  
306 -
307 307  = 5. Keys, IDs and EUIs management =
308 308  
309 309  == 5.1 Application EUI ==
... ... @@ -314,7 +314,7 @@
314 314  **AT Command: AT+APPEUI**
315 315  {{/info}}
316 316  
317 -(% border="1" style="background-color:#ffffcc; color:green; width:686.222px" %)
227 +(% style="background-color:#ffffcc; color:green; width:686.222px" %)
318 318  |=(% colspan="3" style="width: 683px;" %)AT+APPEUI
319 319  |(% style="width:305px" %)**Command Example**|(% style="width:186px" %)**Function**|(% style="width:191px" %)**Response**
320 320  |(% style="width:305px" %)AT+APPEUI=?|(% style="width:186px" %)Get the Application EUI|(% style="width:191px" %)00 b3 d5 00 00 00 00 00(((
... ... @@ -322,8 +322,6 @@
322 322  )))
323 323  |(% style="width:305px" %)AT+APPEUI=00 b3 d5 7e f0 00 4d 34|(% style="width:186px" %)Set the Application EUI|(% style="width:191px" %)OK
324 324  
325 -
326 -
327 327  == 5.2 Application Key ==
328 328  
329 329  Feature: Get or Set the Application Key.
... ... @@ -332,7 +332,7 @@
332 332  **AT Command: AT+APPKEY**
333 333  {{/info}}
334 334  
335 -(% border="1" style="background-color:#ffffcc; color:green; width:976.222px" %)
243 +(% style="background-color:#ffffcc; color:green; width:976.222px" %)
336 336  |=(% colspan="3" style="width: 973px;" %)AT+APPKEY
337 337  |(% style="width:441px" %)**Command Example**|(% style="width:180px" %)**Function**|(% style="width:350px" %)**Response**
338 338  |(% style="width:441px" %)AT+APPKEY=?|(% style="width:180px" %)Get the Application Key|(% style="width:350px" %)00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35(((
... ... @@ -340,8 +340,6 @@
340 340  )))
341 341  |(% style="width:441px" %)AT+APPKEY=00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35|(% style="width:180px" %)Set the Application Key|(% style="width:350px" %)OK
342 342  
343 -
344 -
345 345  == 5.3 Application Session Key ==
346 346  
347 347  Feature: Get or Set the Application Session Key.
... ... @@ -350,7 +350,7 @@
350 350  **AT Command: AT+APPSKEY**
351 351  {{/info}}
352 352  
353 -(% border="1" style="background-color:#ffffcc; color:green; width:1040.22px" %)
259 +(% style="background-color:#ffffcc; color:green; width:1040.22px" %)
354 354  |=(% colspan="3" style="width: 1037px;" %)AT+APPSKEY
355 355  |(% style="width:451px" %)**Command Example**|(% style="width:231px" %)**Function**|(% style="width:354px" %)**Response**
356 356  |(% style="width:451px" %)AT+APPSKEY=?|(% style="width:231px" %)Get the Application Session Key|(% style="width:354px" %)00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2(((
... ... @@ -360,8 +360,6 @@
360 360  OK
361 361  )))
362 362  
363 -
364 -
365 365  == 5.4 Device Address ==
366 366  
367 367  Feature: Get or Set the Device Address.
... ... @@ -370,7 +370,7 @@
370 370  **AT Command: AT+DADDR**
371 371  {{/info}}
372 372  
373 -(% border="1" style="background-color:#ffffcc; color:green; width:795.222px" %)
277 +(% style="background-color:#ffffcc; color:green; width:795.222px" %)
374 374  |=(% colspan="3" style="width: 792px;" %)AT+DADDR
375 375  |(% style="width:192px" %)**Command Example**|(% style="width:241px" %)**Function**|(% style="width:359px" %)**Response**
376 376  |(% style="width:192px" %)AT+DADDR=?|(% style="width:241px" %)Get the Application Session Key.|(% style="width:359px" %)(While Error in format, return AT_PARAM_ERROR)(((
... ... @@ -380,8 +380,6 @@
380 380  )))
381 381  |(% style="width:192px" %)AT+DADDR=A8 40 41 FF|(% style="width:241px" %)Set the Application Session Key.|(% style="width:359px" %)OK
382 382  
383 -
384 -
385 385  == 5.5 Device EUI ==
386 386  
387 387  Feature: Get or Set the Device EUI.
... ... @@ -390,7 +390,7 @@
390 390  **AT Command: AT+DEUI**
391 391  {{/info}}
392 392  
393 -(% border="1" style="background-color:#ffffcc; color:green; width:1035.22px" %)
295 +(% style="background-color:#ffffcc; color:green; width:1035.22px" %)
394 394  |=(% colspan="3" style="width: 1032px;" %)AT+DEUI
395 395  |(% style="width:250px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:634px" %)**Response**
396 396  |(% style="width:250px" %)AT+DEUI=?|(% style="width:147px" %)Get the Device EUI.|(% style="width:634px" %)00 44 34 22 33 45 55 55(((
... ... @@ -400,8 +400,6 @@
400 400  OK
401 401  )))
402 402  
403 -
404 -
405 405  == 5.6 Network ID ==
406 406  
407 407  Feature: Get or Set the Network ID.(You can enter this command change only after successful network connection)
... ... @@ -410,7 +410,7 @@
410 410  **AT Command: AT+NWKID**
411 411  {{/info}}
412 412  
413 -(% border="1" style="background-color:#ffffcc; color:green; width:448.222px" %)
313 +(% style="background-color:#ffffcc; color:green; width:448.222px" %)
414 414  |=(% colspan="3" style="width: 445px;" %)AT+NWKID
415 415  |(% style="width:191px" %)**Command Example**|(% style="width:153px" %)**Function**|(% style="width:101px" %)**Response**
416 416  |(% style="width:191px" %)AT+NWKID=?|(% style="width:153px" %)Get the Network ID.|(% style="width:101px" %)a8 40 41 ff(((
... ... @@ -418,8 +418,6 @@
418 418  )))
419 419  |(% style="width:191px" %)AT+NWKID=A8 40 41 FF|(% style="width:153px" %)Set the Network ID.|(% style="width:101px" %)OK
420 420  
421 -
422 -
423 423  == 5.7 Network Session Key ==
424 424  
425 425  Feature: Get or Set the Network Session Key
... ... @@ -428,7 +428,7 @@
428 428  **AT Command: AT+NWKSKEY**
429 429  {{/info}}
430 430  
431 -(% border="1" style="background-color:#ffffcc; color:green; width:1017.22px" %)
329 +(% style="background-color:#ffffcc; color:green; width:1017.22px" %)
432 432  |=(% colspan="3" style="width: 1014px;" %)AT+NWKSKEY
433 433  |(% style="width:455px" %)**Command Example**|(% style="width:215px" %)**Function**|(% style="width:343px" %)**Response**
434 434  |(% style="width:455px" %)AT+NWKSKEY=?|(% style="width:215px" %)Get the Network Session Key.|(% style="width:343px" %)00 4f 19 25 52 ce 97 09 d7 fa 84 71 db 51 02 92(((
... ... @@ -436,8 +436,6 @@
436 436  )))
437 437  |(% style="width:455px" %)AT+NWKSKEY=A8 40 41 FF FF 12 34 56 00 01 02 04 05 06 06 07|(% style="width:215px" %)Set the Network Session Key.|(% style="width:343px" %)OK
438 438  
439 -
440 -
441 441  = 6. Joining and sending date on LoRaWAN network =
442 442  
443 443  == 6.1 Confirm Mode ==
... ... @@ -448,7 +448,7 @@
448 448  **AT Command: AT+CFM**
449 449  {{/info}}
450 450  
451 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
347 +(% style="background-color:#ffffcc; color:green; width:710.222px" %)
452 452  |=(% colspan="3" style="width: 707px;" %)AT+CFM
453 453  |(% style="width:155px" %)**Command Example**|(% style="width:205px" %)**Function**|(% style="width:346px" %)**Response**
454 454  |(% style="width:155px" %)AT+CFM=?|(% style="width:205px" %)Get the confirmation mode|(% style="width:346px" %)0(((
... ... @@ -466,137 +466,100 @@
466 466  * Example 1: Downlink Payload: 0501 ~/~/ Set AT+CFM=1
467 467  * Example 2: Downlink Payload: 0500 ~/~/ Set AT+CFM=0
468 468  
469 -
470 -
471 471  == 6.2 Confirm Status ==
472 472  
473 473  Feature: Get confirmation status of the last AT+SEND (0-1).
474 474  
475 -{{info}}
476 -**AT Command: AT+CFS**
477 -{{/info}}
369 +AT Command: AT+CFS
478 478  
479 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
480 -|=(% colspan="3" style="width: 531px;" %)AT+CFS
481 -|(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:178px" %)**Response**
482 -|(% style="width:156px" %)AT+CFS=?|(% style="width:193px" %)Get confirmation status|(% style="width:178px" %)0(((
371 +|=(% colspan="3" %)AT+CFS
372 +|**Command Example**|**Function**|**Response**
373 +|AT+CFS=?|Get confirmation status|0(((
483 483  OK
484 484  )))
485 485  
486 -
487 -
488 488  == 6.3 Join LoRa® Network ==
489 489  
490 490  Feature: Join network.
491 491  
492 -{{info}}
493 -**AT Command: AT+JOIN**
494 -{{/info}}
381 +AT Command: AT+JOIN
495 495  
496 -(% border="1" style="background-color:#ffffcc; color:green; width:647.222px" %)
497 -|=(% colspan="3" style="width: 644px;" %)AT+JOIN
498 -|(% style="width:163px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:334px" %)**Response**
499 -|(% style="width:163px" %)AT+JOIN ?|(% style="width:147px" %)Get imformation.|(% style="width:334px" %)AT+JOIN: Join network(((
383 +|=(% colspan="3" %)AT+JOIN
384 +|**Command Example**|**Function**|**Response**
385 +|AT+JOIN ?|Get imformation.|AT+JOIN: Join network(((
500 500  OK
501 501  
502 502  While Error in format, return AT_BUSY_ERROR
503 503  )))
504 504  
505 -
506 -
507 507  == 6.4 LoRa® Network Join Mode ==
508 508  
509 509  Feature: Get or Set the Network Join Mode. (0: ABP, 1: OTAA).
510 510  
511 -{{info}}
512 -**AT Command: AT+NJM**
513 -{{/info}}
395 +AT Command: AT+NJM
514 514  
515 -(% border="1" style="background-color:#ffffcc; color:green; width:753.222px" %)
516 -|=(% colspan="3" style="width: 750px;" %)AT+NJM
517 -|(% style="width:162px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:361px" %)**Response**
518 -|(% style="width:162px" %)AT+NJM=?|(% style="width:227px" %)Get the Network Join Mode|(% style="width:361px" %)1(((
397 +|=(% colspan="3" %)AT+NJM
398 +|**Command Example**|**Function**|**Response**
399 +|AT+NJM=?|Get the Network Join Mode|1(((
519 519  OK
520 520  )))
521 -|(% style="width:162px" %)AT+NJM=0|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)OK
522 -|(% style="width:162px" %)AT+NJM=2|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)While Error in format, return AT_PARAM_ERROR
402 +|AT+NJM=0|Set the Network Join Mode|OK
403 +|AT+NJM=2|Set the Network Join Mode|While Error in format, return AT_PARAM_ERROR
523 523  
524 -{{info}}
525 -**Downlink Command: 0x20**
526 -{{/info}}
405 +Downlink Command: 0x20
527 527  
528 528  Format: Command Code (0x20) followed by 1 bytes mode value.
529 529  
530 530  If the downlink payload=2000, it means set the Network Join Mode, while type code is 20.
531 531  
532 -* **Example 1: **Downlink Payload: **2000** ~/~/ Set AT+NJM=O
533 -* **Example 2:** Downlink Payload: **2001** ~/~/ Set AT+NJM=1
411 +* Example 1: Downlink Payload: 2000 ~/~/ Set AT+NJM=O
412 +* Example 2: Downlink Payload: 2001 ~/~/ Set AT+NJM=1
534 534  
535 -
536 -
537 537  == 6.5 LoRa® Network Join Status ==
538 538  
539 539  Feature: LoRa® Network Join Status.
540 540  
541 -{{info}}
542 -**AT Command: AT+NJS**
543 -{{/info}}
418 +AT Command: AT+NJS
544 544  
545 -(% border="1" style="background-color:#ffffcc; color:green; width:498.222px" %)
546 -|=(% colspan="3" style="width: 495px;" %)AT+NJS
547 -|(% style="width:169px" %)**Command Example**|(% style="width:164px" %)**Function**|(% style="width:161px" %)**Response**
548 -|(% style="width:169px" %)AT+NJS=?|(% style="width:164px" %)Get the join status.|(% style="width:161px" %)0(((
420 +|=(% colspan="3" %)AT+NJS
421 +|**Command Example**|**Function**|**Response**
422 +|AT+NJS=?|Get the join status.|0(((
549 549  OK
550 550  )))
551 551  
552 -
553 -
554 554  == 6.6 Print Last Received Data in Raw Format ==
555 555  
556 556  Feature: Print Last Received Data in Raw Format<port:data>.
557 557  
558 -{{info}}
559 -**AT Command: AT+RECV**
560 -{{/info}}
430 +AT Command: AT+RECV
561 561  
562 -(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
563 -|=(% colspan="3" style="width: 584px;" %)AT+RECV
564 -|(% style="width:161px" %)**Command Example**|(% style="width:272px" %)**Function**|(% style="width:150px" %)**Response**
565 -|(% style="width:161px" %)AT+RECV=?|(% style="width:272px" %)print last received data in raw format.|(% style="width:150px" %)0:(((
432 +|=(% colspan="3" %)AT+RECV
433 +|**Command Example**|**Function**|**Response**
434 +|AT+RECV=?|print last received data in raw format.|0:(((
566 566  OK
567 567  )))
568 568  
569 -
570 -
571 571  == 6.7 Print Last Received Data in Binary Format ==
572 572  
573 573  Feature: Print Last Received Data in Binary Format<port:data>.
574 574  
575 -{{info}}
576 -**AT Command: AT+RECVB**
577 -{{/info}}
442 +AT Command: AT+RECVB
578 578  
579 -(% border="1" style="background-color:#ffffcc; color:green; width:793.222px" %)
580 -|=(% colspan="3" style="width: 790px;" %)AT+RECVB
581 -|(% style="width:173px" %)**Command Example**|(% style="width:497px" %)**Function**|(% style="width:120px" %)**Response**
582 -|(% style="width:173px" %)AT+RECVB=?|(% style="width:497px" %)print last received data in binary format (with hexadecimal values).|(% style="width:120px" %)2: 0010(((
444 +|=(% colspan="3" %)AT+RECVB
445 +|**Command Example**|**Function**|**Response**
446 +|AT+RECVB=?|print last received data in binary format (with hexadecimal values).|2: 0010(((
583 583  OK
584 584  )))
585 585  
586 -
587 -
588 588  == 6.8 Send Text Data ==
589 589  
590 590  Feature: Send Text Data<port:data>.
591 591  
592 -{{info}}
593 -**AT Command: AT+SEND**
594 -{{/info}}
454 +AT Command: AT+SEND
595 595  
596 -(% border="1" style="background-color:#ffffcc; color:green; width:991.222px" %)
597 -|=(% colspan="3" style="width: 988px;" %)AT+SEND
598 -|(% style="width:201px" %)**Command Example**|(% style="width:340px" %)**Function**|(% style="width:446px" %)**Response**
599 -|(% style="width:201px" %)AT+SEND=12:hello world|(% style="width:340px" %)Send text data along with the application port.|(% style="width:446px" %)OK(((
456 +|=(% colspan="3" %)AT+SEND
457 +|**Command Example**|**Function**|**Response**
458 +|AT+SEND=12:hello world|Send text data along with the application port.|OK(((
600 600  While Error in format, return
601 601  
602 602  AT_BUSY_ERROR/AT_BUSY_ERROR/AT_NO_NETWORK_JOINED
... ... @@ -604,28 +604,21 @@
604 604  
605 605  )))
606 606  
607 -
608 -
609 609  == 6.9 Send Hexadecimal Data ==
610 610  
611 611  Feature: Send hexadecimal data along with the application port.
612 612  
613 -{{info}}
614 -**AT Command: AT+SENDB**
615 -{{/info}}
470 +AT Command: AT+SENDB
616 616  
617 -(% border="1" style="background-color:#ffffcc; color:green; width:1120.22px" %)
618 -|=(% colspan="3" style="width: 1117px;" %)AT+SENDB
619 -|(% style="width:257px" %)**Command Example**|(% style="width:406px" %)**Function**|(% style="width:453px" %)**Response**
620 -|(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)OK
621 -|(% style="width:257px" %)AT+SENDB=abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)While Error in format, return(((
472 +|=(% colspan="3" %)AT+SENDB
473 +|**Command Example**|**Function**|**Response**
474 +|AT+SENDB=12:abcdef0123456789|Send hexadecimal data along with the application port.|OK
475 +|AT+SENDB=abcdef0123456789|Send hexadecimal data along with the application port.|While Error in format, return(((
622 622  AT_PARAM_ERROR AT_BUSY_ERROR/AT_NO_NETWORK_JOINED
623 623  
624 624  
625 625  )))
626 626  
627 -
628 -
629 629  = 7. LoRaWAN network management =
630 630  
631 631  == 7.1 Adaptive Data Rate ==
... ... @@ -632,140 +632,109 @@
632 632  
633 633  Feature: Get or Set the Adaptive Data Rate setting. (0: off, 1: on).
634 634  
635 -{{info}}
636 -**AT Command: AT+ADR**
637 -{{/info}}
638 638  
639 -(% border="1" style="background-color:#ffffcc; color:green; width:683.222px" %)
640 -|=(% colspan="3" style="width: 680px;" %)AT+ADR
641 -|(% style="width:162px" %)**Command Example**|(% style="width:266px" %)**Function**|(% style="width:250px" %)**Response**
642 -|(% style="width:162px" %)AT+ADR=?|(% style="width:266px" %)Get the Adaptive Data Rate setting.|(% style="width:250px" %)1(((
488 +AT Command: AT+ADR
489 +
490 +|=(% colspan="3" %)AT+ADR
491 +|**Command Example**|**Function**|**Response**
492 +|AT+ADR=?|Get the Adaptive Data Rate setting.|1(((
643 643  OK
644 644  )))
645 -|(% style="width:162px" %)AT+ADR=0|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:250px" %)OK
646 -|(% style="width:162px" %)AT+ADR=2|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:250px" %)While Error in format, return(((
495 +|AT+ADR=0|Set the Adaptive Data Rate setting.|OK
496 +|AT+ADR=2|Set the Adaptive Data Rate setting.|While Error in format, return(((
647 647  AT_PARAM_ERROR
648 648  )))
649 649  
650 -{{info}}
651 -**Downlink Command: 0x22**
652 -{{/info}}
500 +Downlink Command: 0x22
653 653  
654 654  
655 655  If the downlink payload=2201, it means setting the adaptive data rate to 1, while type code is 22.
656 656  
657 -* **Example 1**: Downlink Payload: **2201** ~/~/ Set AT+ADR=1.
658 -* **Example 2**: Downlink Payload: **2200FFFF** ~/~/ Set AT+ADR=0.
505 +* Example 1: Downlink Payload: 2201 ~/~/ Set AT+ADR=1.
506 +* Example 2: Downlink Payload: 2200FFFF ~/~/ Set AT+ADR=0.
659 659  
660 -
661 -
662 662  == 7.2 LoRa® Class ==
663 663  
664 664  Feature: Get or Set the Device Class(Currently only support class A, class C).
665 665  
666 -{{info}}
667 -**AT Command:AT+CLASS**
668 -{{/info}}
512 +AT Command:AT+CLASS
669 669  
670 -(% border="1" style="background-color:#ffffcc; color:green; width:507.222px" %)
671 -|=(% colspan="3" style="width: 504px;" %)AT+CLASS
672 -|(% style="width:163px" %)**Command Example**|(% style="width:166px" %)**Function**|(% style="width:175px" %)**Response**
673 -|(% style="width:163px" %)AT+CLASS=?|(% style="width:166px" %)Get the Device Class.|(% style="width:175px" %)A(((
514 +|=(% colspan="3" %)AT+CLASS
515 +|**Command Example**|**Function**|**Response**
516 +|AT+CLASS=?|Get the Device Class.|A(((
674 674  OK
675 675  )))
676 -|(% style="width:163px" %)AT+CLASS=C|(% style="width:166px" %)Set the Device Class.|(% style="width:175px" %)OK(((
519 +|AT+CLASS=C|Set the Device Class.|OK(((
677 677  
678 678  )))
679 679  
680 -
681 -
682 682  == 7.3 Duty Cycle Setting ==
683 683  
684 684  Feature: Get or Set the ETSI Duty Cycle setting - 0=disable, 1=enable - Only for testing.
685 685  
686 -{{info}}
687 -**AT Command:AT+DCS**
688 -{{/info}}
527 +AT Command:AT+DCS
689 689  
690 -(% border="1" style="background-color:#ffffcc; color:green; width:515.222px" %)
691 -|=(% colspan="3" style="width: 512px;" %)AT+DCS
692 -|(% style="width:165px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:107px" %)**Response**
693 -|(% style="width:165px" %)AT+DCS=?|(% style="width:239px" %)Get the ETSI Duty Cycle setting.|(% style="width:107px" %)1(((
529 +|=(% colspan="3" %)AT+DCS
530 +|**Command Example**|**Function**|**Response**
531 +|AT+DCS=?|Get the ETSI Duty Cycle setting.|1(((
694 694  OK
695 695  )))
696 -|(% style="width:165px" %)AT+DCS=1|(% style="width:239px" %)Set the ETSI Duty Cycle setting.|(% style="width:107px" %)OK(((
534 +|AT+DCS=1|Set the ETSI Duty Cycle setting.|OK(((
697 697  
698 698  )))
699 699  
700 -
701 -
702 702  == 7.4 Data Rate ==
703 703  
704 704  Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) . Note: while set Data Rate, please use set Adptive Data Rate, ADR=0 first. otherwise device will response to server's ADR command and change the DR to the setting from server
705 705  
706 -{{info}}
707 -**AT Command: AT+DR**
708 -{{/info}}
542 +AT Command: AT+DR
709 709  
710 -(% border="1" style="background-color:#ffffcc; color:green; width:466.222px" %)
711 -|=(% colspan="3" style="width: 463px;" %)AT+DR
712 -|(% style="width:156px" %)**Command Example**|(% style="width:167px" %)**Function**|(% style="width:140px" %)**Response**
713 -|(% style="width:156px" %)AT+DR=?|(% style="width:167px" %)Get the Data Rate.|(% style="width:140px" %)5(((
544 +|=(% colspan="3" %)AT+DR
545 +|**Command Example**|**Function**|**Response**
546 +|AT+DR=?|Get the Data Rate.|5(((
714 714  OK
715 715  )))
716 -|(% style="width:156px" %)AT+DR=2|(% style="width:167px" %)Set the Data Rate.|(% style="width:140px" %)OK(((
549 +|AT+DR=2|Set the Data Rate.|OK(((
717 717  
718 718  )))
719 719  
720 -{{info}}
721 -**Downlink Command: 0x2200aaFF**
722 -{{/info}}
553 +Downlink Command: 0x2200aaFF
723 723  
724 724  
725 725  If the downlink payload=220001FF, it means setting the data rate to 1, while type code is 22 00 aa FF.
726 726  
727 -* **Example 1**: Downlink Payload: **220001FF** ~/~/ Set AT+DR=1.
728 -* **Example 2**: Downlink Payload: **220000FF** ~/~/ Set AT+DR=0.
558 +* Example 1: Downlink Payload: 220001FF ~/~/ Set AT+DR=1.
559 +* Example 2: Downlink Payload: 220000FF ~/~/ Set AT+DR=0.
729 729  
730 -
731 -
732 732  == 7.5 Frame Counter Downlink ==
733 733  
734 734  Feature: Get or Set the Frame Counter Downlink.
735 735  
736 -{{info}}
737 -**AT Command:AT+FCD**
738 -{{/info}}
565 +AT Command:AT+FCD
739 739  
740 -(% border="1" style="background-color:#ffffcc; color:green; width:693.222px" %)
741 -|=(% colspan="3" style="width: 690px;" %)AT+FCD
742 -|(% style="width:162px" %)**Command Example**|(% style="width:258px" %)**Function**|(% style="width:269px" %)**Response**
743 -|(% style="width:162px" %)AT+FCD=?|(% style="width:258px" %)Get the Frame Counter Downlink.|(% style="width:269px" %)0(((
567 +|=(% colspan="3" %)AT+FCD
568 +|**Command Example**|**Function**|**Response**
569 +|AT+FCD=?|Get the Frame Counter Downlink.|0(((
744 744  OK
745 745  )))
746 -|(% style="width:162px" %)AT+FCD=10|(% style="width:258px" %)Set the Frame Counter Downlink.|(% style="width:269px" %)(System will write new value to FCD)(((
572 +|AT+FCD=10|Set the Frame Counter Downlink.|(System will write new value to FCD)(((
747 747  OK
748 748  
749 749  
750 750  )))
751 751  
752 -
753 -
754 754  == 7.6 Frame Counter Uplink ==
755 755  
756 756  Feature: Get or Set the Frame Counter Uplink.
757 757  
758 -{{info}}
759 -**AT Command:AT+FCU**
760 -{{/info}}
582 +AT Command:AT+FCU
761 761  
762 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
763 -|=(% colspan="3" style="width: 531px;" %)AT+FCU
764 -|(% style="width:177px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:113px" %)**Response**
765 -|(% style="width:177px" %)AT+FCU=?|(% style="width:239px" %)Get the Frame Counter Uplink.|(% style="width:113px" %)0(((
584 +|=(% colspan="3" %)AT+FCU
585 +|**Command Example**|**Function**|**Response**
586 +|AT+FCU=?|Get the Frame Counter Uplink.|0(((
766 766  OK
767 767  )))
768 -|(% style="width:177px" %)AT+FCU=10|(% style="width:239px" %)Set the Frame Counter Uplink.|(% style="width:113px" %)OK(((
589 +|AT+FCU=10|Set the Frame Counter Uplink.|OK(((
769 769  
770 770  )))
771 771  
... ... @@ -773,17 +773,14 @@
773 773  
774 774  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 1 in ms.
775 775  
776 -{{info}}
777 -**AT Command:AT+JN1DL**
778 -{{/info}}
597 +AT Command:AT+JN1DL
779 779  
780 -(% border="1" style="background-color:#ffffcc; color:green; width:537.222px" %)
781 -|=(% colspan="3" style="width: 534px;" %)AT+JN1DL
782 -|(% style="width:164px" %)**Command Example**|(% style="width:229px" %)**Function**|(% style="width:140px" %)**Response**
783 -|(% style="width:164px" %)AT+JN1DL=?|(% style="width:229px" %)Get the Join Accept Delay.|(% style="width:140px" %)5000(((
599 +|=(% colspan="3" %)AT+JN1DL
600 +|**Command Example**|**Function**|**Response**
601 +|AT+JN1DL=?|Get the Join Accept Delay.|5000(((
784 784  OK
785 785  )))
786 -|(% style="width:164px" %)AT+JN1DL=10000|(% style="width:229px" %)Set the Join Accept Delay.|(% style="width:140px" %)OK(((
604 +|AT+JN1DL=10000|Set the Join Accept Delay.|OK(((
787 787  
788 788  )))
789 789  
... ... @@ -791,17 +791,14 @@
791 791  
792 792  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 2 in ms.
793 793  
794 -{{info}}
795 -**AT Command:AT+JN2DL**
796 -{{/info}}
612 +AT Command:AT+JN2DL
797 797  
798 -(% border="1" style="background-color:#ffffcc; color:green; width:538.222px" %)
799 -|=(% colspan="3" style="width: 535px;" %)AT+JN2DL
800 -|(% style="width:160px" %)**Command Example**|(% style="width:228px" %)**Function**|(% style="width:146px" %)**Response**
801 -|(% style="width:160px" %)AT+JN2DL=?|(% style="width:228px" %)Get the Join Accept Delay.|(% style="width:146px" %)6000(((
614 +|=(% colspan="3" %)AT+JN2DL
615 +|**Command Example**|**Function**|**Response**
616 +|AT+JN2DL=?|Get the Join Accept Delay.|6000(((
802 802  OK
803 803  )))
804 -|(% style="width:160px" %)AT+JN2DL=20000|(% style="width:228px" %)Set the Join Accept Delay.|(% style="width:146px" %)OK(((
619 +|AT+JN2DL=20000|Set the Join Accept Delay.|OK(((
805 805  
806 806  )))
807 807  
... ... @@ -809,17 +809,14 @@
809 809  
810 810  Feature: Get or Set the public network mode. (0: off, 1: on)
811 811  
812 -{{info}}
813 -**AT Command:AT+PNM**
814 -{{/info}}
627 +AT Command:AT+PNM
815 815  
816 -(% border="1" style="background-color:#ffffcc; color:green; width:667.222px" %)
817 -|=(% colspan="3" style="width: 664px;" %)AT+PNM
818 -|(% style="width:166px" %)**Command Example**|(% style="width:225px" %)**Function**|(% style="width:272px" %)**Response**
819 -|(% style="width:166px" %)AT+PNM=?|(% style="width:225px" %)Get the public network mode.|(% style="width:272px" %)1(((
629 +|=(% colspan="3" %)AT+PNM
630 +|**Command Example**|**Function**|**Response**
631 +|AT+PNM=?|Get the public network mode.|1(((
820 820  OK
821 821  )))
822 -|(% style="width:166px" %)AT+PNM=1|(% style="width:225px" %)Set the public network mode.|(% style="width:272px" %)(System will write new value to PNM)(((
634 +|AT+PNM=1|Set the public network mode.|(System will write new value to PNM)(((
823 823  OK
824 824  
825 825  
... ... @@ -829,35 +829,29 @@
829 829  
830 830  Feature: Get or Set the delay between the end of the Tx and the Rx Window 1 in ms
831 831  
832 -{{info}}
833 -**AT Command:AT+RX1DL**
834 -{{/info}}
644 +AT Command:AT+RX1DL
835 835  
836 -(% border="1" style="background-color:#ffffcc; color:green; width:408.222px" %)
837 -|=(% colspan="3" style="width: 405px;" %)AT+RX1DL
838 -|(% style="width:155px" %)**Command Example**|(% style="width:128px" %)**Function**|(% style="width:122px" %)**Response**
839 -|(% style="width:155px" %)AT+RX1DL=?|(% style="width:128px" %)Get the delay.|(% style="width:122px" %)1000(((
646 +|=(% colspan="3" %)AT+RX1DL
647 +|**Command Example**|**Function**|**Response**
648 +|AT+RX1DL=?|Get the delay.|1000(((
840 840  OK
841 841  )))
842 -|(% style="width:155px" %)AT+RX1DL=1500|(% style="width:128px" %)Set the delay.|(% style="width:122px" %)OK(((
651 +|AT+RX1DL=1500|Set the delay.|OK(((
843 843  
844 844  )))
845 845  
846 -== 7.11 Receive Delay2 ==
655 +== 7.11Receive Delay2 ==
847 847  
848 848  Feature: Get or Set the delay between the end of the Tx and the Rx Window 2 in ms
849 849  
850 -{{info}}
851 -**AT Command:AT+RX2DL**
852 -{{/info}}
659 +AT Command:AT+RX2DL
853 853  
854 -(% border="1" style="background-color:#ffffcc; color:green; width:481.222px" %)
855 -|=(% colspan="3" style="width: 478px;" %)AT+RX2DL
856 -|(% style="width:175px" %)**Command Example**|(% style="width:152px" %)**Function**|(% style="width:150px" %)**Response**
857 -|(% style="width:175px" %)AT+RX2DL=?|(% style="width:152px" %)Get the delay.|(% style="width:150px" %)2000(((
661 +|=(% colspan="3" %)AT+RX2DL
662 +|**Command Example**|**Function**|**Response**
663 +|AT+RX2DL=?|Get the delay.|2000(((
858 858  OK
859 859  )))
860 -|(% style="width:175px" %)AT+RX2DL=2500|(% style="width:152px" %)Set the delay.|(% style="width:150px" %)OK(((
666 +|AT+RX2DL=2500|Set the delay.|OK(((
861 861  
862 862  )))
863 863  
... ... @@ -865,17 +865,14 @@
865 865  
866 866  Feature: Get or Set the Rx2 window data rate (0-7 corresponding to DR_X)
867 867  
868 -{{info}}
869 -**AT Command:AT+RX2DR**
870 -{{/info}}
674 +AT Command:AT+RX2DR
871 871  
872 -(% border="1" style="background-color:#ffffcc; color:green; width:525.222px" %)
873 -|=(% colspan="3" style="width: 522px;" %)AT+RX2DR
874 -|(% style="width:160px" %)**Command Example**|(% style="width:232px" %)**Function**|(% style="width:130px" %)**Response**
875 -|(% style="width:160px" %)AT+RX2DR=?|(% style="width:232px" %)Get the Rx2 window data rate.|(% style="width:130px" %)2(((
676 +|=(% colspan="3" %)AT+RX2DR
677 +|**Command Example**|**Function**|**Response**
678 +|AT+RX2DR=?|Get the Rx2 window data rate.|2(((
876 876  OK
877 877  )))
878 -|(% style="width:160px" %)AT+RX2DR=6|(% style="width:232px" %)Set the Rx2 window data rate.|(% style="width:130px" %)OK(((
681 +|AT+RX2DR=6|Set the Rx2 window data rate.|OK(((
879 879  
880 880  )))
881 881  
... ... @@ -883,17 +883,14 @@
883 883  
884 884  Feature: Get or Set the Rx2 window frequency
885 885  
886 -{{info}}
887 -**AT Command:AT+RX2FQ**
888 -{{/info}}
689 +AT Command:AT+RX2FQ
889 889  
890 -(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
891 -|=(% colspan="3" style="width: 584px;" %)AT+RX2FQ
892 -|(% style="width:183px" %)**Command Example**|(% style="width:240px" %)**Function**|(% style="width:160px" %)**Response**
893 -|(% style="width:183px" %)AT+RX2FQ=?|(% style="width:240px" %)Get the Rx2 window frequency.|(% style="width:160px" %)434665000(((
691 +|=(% colspan="3" %)AT+RX2FQ
692 +|**Command Example**|**Function**|**Response**
693 +|AT+RX2FQ=?|Get the Rx2 window frequency.|434665000(((
894 894  OK
895 895  )))
896 -|(% style="width:183px" %)AT+RX2FQ=434665000|(% style="width:240px" %)Set the Rx2 window frequency.|(% style="width:160px" %)OK(((
696 +|AT+RX2FQ=434665000|Set the Rx2 window frequency.|OK(((
897 897  
898 898  )))
899 899  
... ... @@ -901,17 +901,14 @@
901 901  
902 902  Feature: Get or Set the Transmit Power(0-5, MAX:0, MIN:5, according to LoRaWAN Spec, or 40=10dB, 41 = 11dB, …, 50 = 20dB which is out of LoRaWAN spec. )
903 903  
904 -{{info}}
905 -**AT Command:AT+TXP**
906 -{{/info}}
704 +AT Command:AT+TXP
907 907  
908 -(% border="1" style="background-color:#ffffcc; color:green; width:465.222px" %)
909 -|=(% colspan="3" style="width: 462px;" %)AT+TXP
910 -|(% style="width:161px" %)**Command Example**|(% style="width:189px" %)**Function**|(% style="width:112px" %)**Response**
911 -|(% style="width:161px" %)AT+TXP=?|(% style="width:189px" %)Get the Transmit Power.|(% style="width:112px" %)0(((
706 +|=(% colspan="3" %)AT+TXP
707 +|**Command Example**|**Function**|**Response**
708 +|AT+TXP=?|Get the Transmit Power.|0(((
912 912  OK
913 913  )))
914 -|(% style="width:161px" %)AT+TXP=1|(% style="width:189px" %)Set the Transmit Power.|(% style="width:112px" %)OK(((
711 +|AT+TXP=1|Set the Transmit Power.|OK(((
915 915  
916 916  )))
917 917  
... ... @@ -919,21 +919,18 @@
919 919  
920 920  If the downlink payload=22000100, it means setting the TXP to 0.
921 921  
922 -* **Example 1**: Downlink Payload: **22000102** ~/~/ Set AT+TXP=2.
923 -* **Example 2**: Downlink Payload: **220000FF** ~/~/ Set AT+TXP=0.
719 +* Example 1: Downlink Payload: 22000102 ~/~/ Set AT+TXP=2.
720 +* Example 2: Downlink Payload: 220000FF ~/~/ Set AT+TXP=0.
924 924  
925 925  == 7.15 RSSI of the Last Received Packet ==
926 926  
927 927  Feature: Get or Set the Rx2 window frequency
928 928  
929 -{{info}}
930 -**AT Command:AT+RSSI**
931 -{{/info}}
726 +AT Command:AT+RSSI
932 932  
933 -(% border="1" style="background-color:#ffffcc; color:green; width:557.222px" %)
934 -|=(% colspan="3" style="width: 554px;" %)AT+RSSI
935 -|(% style="width:164px" %)**Command Example**|(% style="width:289px" %)**Function**|(% style="width:100px" %)**Response**
936 -|(% style="width:164px" %)AT+RSSI=?|(% style="width:289px" %)Get the RSSI of the last received packet.|(% style="width:100px" %)0(((
728 +|=(% colspan="3" %)AT+RSSI
729 +|**Command Example**|**Function**|**Response**
730 +|AT+RSSI=?|Get the RSSI of the last received packet.|0(((
937 937  OK
938 938  )))
939 939  
... ... @@ -941,14 +941,11 @@
941 941  
942 942  Feature: Get the SNR of the last received packet
943 943  
944 -{{info}}
945 -**AT Command:AT+SNR**
946 -{{/info}}
738 +AT Command:AT+SNR
947 947  
948 -(% border="1" style="background-color:#ffffcc; color:green; width:571.222px" %)
949 -|=(% colspan="3" style="width: 568px;" %)AT+SNR
950 -|(% style="width:164px" %)**Command Example**|(% style="width:290px" %)**Function**|(% style="width:113px" %)**Response**
951 -|(% style="width:164px" %)AT+SNR=?|(% style="width:290px" %)Get the RSSI of the last received packet.|(% style="width:113px" %)0(((
740 +|=(% colspan="3" %)AT+SNR
741 +|**Command Example**|**Function**|**Response**
742 +|AT+SNR=?|Get the RSSI of the last received packet.|0(((
952 952  OK
953 953  )))
954 954  
... ... @@ -956,144 +956,114 @@
956 956  
957 957  Feature: Get or set the application port.
958 958  
959 -{{info}}
960 -**AT Command: AT+PORT**
961 -{{/info}}
750 +AT Command: AT+PORT
962 962  
963 -(% border="1" style="background-color:#ffffcc; color:green; width:500.222px" %)
964 -|=(% colspan="3" style="width: 497px;" %)AT+PORT
965 -|(% style="width:157px" %)**Command Example**|(% style="width:204px" %)**Function**|(% style="width:135px" %)**Response**
966 -|(% style="width:157px" %)AT+PORT=?|(% style="width:204px" %)Get the application port|(% style="width:135px" %)21(((
752 +|=(% colspan="3" %)AT+PORT
753 +|**Command Example**|**Function**|**Response**
754 +|AT+PORT=?|Get the application port|21(((
967 967  OK
968 968  )))
969 -|(% style="width:157px" %)AT+PORT=21|(% style="width:204px" %)Set the application port|(% style="width:135px" %)OK
757 +|AT+PORT=21|Set the application port|OK
970 970  
971 -{{info}}
972 -**Downlink Command: 0x23**
973 -{{/info}}
759 +Downlink Command: 0x23
974 974  
975 975  Format: Command Code (0x23) followed by 1 bytes port value.
976 976  
977 977  If the downlink payload=2301, it means set the application port to 1, while type code is 23.
978 978  
979 -* **Example 1**: Downlink Payload: **2301** ~/~/ set the application port to 1
980 -* **Example 2**: Downlink Payload:** 2305** ~/~/ set the application port to 5
765 +* Example 1: Downlink Payload: 2301 ~/~/ set the application port to 1
766 +* Example 2: Downlink Payload: 2305 ~/~/ set the application port to 5
981 981  
982 982  == 7.18 Single Channel Mode ==
983 983  
984 984  Feature:Get or Set Frequency (Unit: Hz) for Single Channel Mode.
985 985  
986 -{{info}}
987 -**AT Command: AT+CHS**
988 -{{/info}}
772 +AT Command: AT+CHS
989 989  
990 -(% border="1" style="background-color:#ffffcc; color:green; width:603.222px" %)
991 -|=(% colspan="3" style="width: 600px;" %)AT+CHS
992 -|(% style="width:182px" %)**Command Example**|(% style="width:295px" %)**Function**|(% style="width:122px" %)**Response**
993 -|(% style="width:182px" %)AT+CHS=?|(% style="width:295px" %)Get Frequency for Single Channel Mode|(% style="width:122px" %)0(((
774 +|=(% colspan="3" %)AT+CHS
775 +|**Command Example**|**Function**|**Response**
776 +|AT+CHS=?|Get Frequency for Single Channel Mode|0(((
994 994  OK
995 995  )))
996 -|(% style="width:182px" %)AT+CHS=868100000|(% style="width:295px" %)Set Frequency for Single Channel Mode|(% style="width:122px" %)OK
779 +|AT+CHS=868100000|Set Frequency for Single Channel Mode|OK
997 997  
998 998  == 7.19 Eight Channel Mode ==
999 999  
1000 1000  Feature: Get or Set eight channels mode,Only for US915,AU915,CN470.
1001 1001  
1002 -{{info}}
1003 -**AT Command: AT+CHE**
1004 -{{/info}}
785 +AT Command: AT+CHE
1005 1005  
1006 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
1007 -|=(% colspan="3" style="width: 707px;" %)AT+CHE
1008 -|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
1009 -|(% style="width:160px" %)AT+CHE=?|(% style="width:198px" %)Get eight channels mode|(% style="width:349px" %)1(((
787 +|=(% colspan="3" %)AT+CHE
788 +|**Command Example**|**Function**|**Response**
789 +|AT+CHE=?|Get eight channels mode|1(((
1010 1010  902.3 902.5 902.7 902.9 903.1 903.3 903.5 903.7
1011 1011  
1012 1012  OK
1013 1013  )))
1014 -|(% style="width:160px" %)AT+CHE=1|(% style="width:198px" %)Set eight channels mode|(% style="width:349px" %)OK
794 +|AT+CHE=1|Set eight channels mode|OK
1015 1015  
1016 -{{info}}
1017 -**Downlink Command: 0x24**
1018 -{{/info}}
796 +Downlink Command: 0x24
1019 1019  
1020 1020  Format: Command Code (0x24) followed by 1 bytes channel value.
1021 1021  
1022 1022  If the downlink payload=2401, it means set channel mode to 1, while type code is 24.
1023 1023  
1024 -* **Example 1**: Downlink Payload: 2401 ~/~/ set channel mode to 1
1025 -* **Example 2**: Downlink Payload: 2405 ~/~/ set channel mode to 5
802 +* Example 1: Downlink Payload: 2401 ~/~/ set channel mode to 1
803 +* Example 2: Downlink Payload: 2405 ~/~/ set channel mode to 5
1026 1026  
1027 1027  == 7.20 Get or Set RXwindows1 timeout ==
1028 1028  
1029 1029  Feature:Get or Set the number of symbols to detect and timeout from RXwindow1(0 to 255).
1030 1030  
1031 -{{info}}
1032 -**AT Command: AT+RX1WTO**
1033 -{{/info}}
809 +AT Command: AT+RX1WTO
1034 1034  
1035 -(% border="1" style="background-color:#ffffcc; color:green; width:460.222px" %)
1036 -|=(% colspan="3" style="width: 457px;" %)AT+ RX1WTO
1037 -|(% style="width:163px" %)**Command Example**|(% style="width:201px" %)**Function**|(% style="width:93px" %)**Response**
1038 -|(% style="width:163px" %)AT+RX1WTO=?|(% style="width:201px" %)Get RXwindows1 timeout|(% style="width:93px" %)14(((
811 +|=(% colspan="3" %)AT+ RX1WTO
812 +|**Command Example**|**Function**|**Response**
813 +|AT+RX1WTO=?|Get RXwindows1 timeout|14(((
1039 1039  OK
1040 1040  )))
1041 -|(% style="width:163px" %)AT+RX1WTO=60|(% style="width:201px" %)Set RXwindows1 timeout|(% style="width:93px" %)OK
816 +|AT+RX1WTO=60|Set RXwindows1 timeout|OK
1042 1042  
1043 -(((
1044 -**AT+RX1TWO** is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
1045 -)))
818 +AT+RX1TWO is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
1046 1046  
1047 -[[image:image-20220526162535-1.png]]
820 +[[~[~[image:https://wiki.dragino.com/images/thumb/5/51/RX1WTO.JPG/600px-RX1WTO.JPG~|~|alt="RX1WTO.JPG" height="239" width="600"~]~]>>url:https://wiki.dragino.com/index.php/File:RX1WTO.JPG]]
1048 1048  
1049 -(((
1050 1050  Increasing thisvalue is equal to extending the time that the receiving window is opened, butthe corresponding power consumption will also increase. Properly increasingthis value can increase the success rate of the downlink.
1051 1051  
1052 -
1053 -)))
1054 -
1055 1055  == 7.21 Get or Set RXwindows2 timeout ==
1056 1056  
1057 1057  Feature:Get or Set the number of symbols to detect and timeout from RXwindow2(0 to 255).
1058 1058  
1059 -{{info}}
1060 -**AT Command: AT+RX2WTO**
1061 -{{/info}}
828 +AT Command: AT+RX2WTO
1062 1062  
1063 -(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
1064 -|=(% colspan="3" style="width: 494px;" %)AT+ RX2WTO
1065 -|(% style="width:190px" %)**Command Example**|(% style="width:199px" %)**Function**|(% style="width:104px" %)**Response**
1066 -|(% style="width:190px" %)AT+RX2WTO=?|(% style="width:199px" %)Get RXwindows2 timeout|(% style="width:104px" %)7(((
830 +|=(% colspan="3" %)AT+ RX2WTO
831 +|**Command Example**|**Function**|**Response**
832 +|AT+RX2WTO=?|Get RXwindows2 timeout|7(((
1067 1067  OK
1068 1068  )))
1069 -|(% style="width:190px" %)AT+RX2WTO=20|(% style="width:199px" %)Set RXwindows2 timeout|(% style="width:104px" %)OK
835 +|AT+RX2WTO=20|Set RXwindows2 timeout|OK
1070 1070  
1071 1071  == 7.22 Setting up uplinkdwelltime (as923, au915) ==
1072 1072  
1073 1073  Feature: Get or Set uplinkdwelltime
1074 1074  
1075 -{{info}}
1076 -**AT Command: AT+DWELLT**
1077 -{{/info}}
841 +AT Command: AT+DWELLT
1078 1078  
1079 -(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
1080 -|=(% colspan="3" style="width: 494px;" %)AT+DWELLT
1081 -|(% style="width:183px" %)**Command Example**|(% style="width:179px" %)**Function**|(% style="width:131px" %)**Response**
1082 -|(% style="width:183px" %)AT+DWELLT=?|(% style="width:179px" %)Get uplinkdwelltime|(% style="width:131px" %)1(((
843 +|=(% colspan="3" %)AT+DWELLT
844 +|**Command Example**|**Function**|**Response**
845 +|AT+DWELLT=?|Get uplinkdwelltime|1(((
1083 1083  OK
1084 1084  )))
1085 -|(% style="width:183px" %)AT+DWELLT=0|(% style="width:179px" %)Set uplinkdwelltime|(% style="width:131px" %)OK
848 +|AT+DWELLT=0|Set uplinkdwelltime|OK
1086 1086  
1087 -{{info}}
1088 -**Downlink Command: 0x25**
1089 -{{/info}}
850 +Downlink Command: 0x25
1090 1090  
1091 1091  Format: Command Code (0x25) followed by 1 bytes state value.
1092 1092  
1093 1093  If the downlink payload=2501, it means set uplinkdwelltime to 1, while type code is 25.
1094 1094  
1095 -* **Example 1**: Downlink Payload: **2501** ~/~/ set uplinkdwelltime to 1
1096 -* **Example 2**: Downlink Payload: **2500** ~/~/ set uplinkdwelltime to 0
856 +* Example 1: Downlink Payload: 2501 ~/~/ set uplinkdwelltime to 1
857 +* Example 2: Downlink Payload: 2500 ~/~/ set uplinkdwelltime to 0
1097 1097  
1098 1098  == 7.23 Set Packet Receiving Response Level ==
1099 1099  
... ... @@ -1101,11 +1101,11 @@
1101 1101  
1102 1102  RPL value:
1103 1103  
1104 -* **AT+RPL=0:** Device won't immediately reply any downlink commands from platform.
1105 -* **AT+RPL=1:** Device will immediately reply message to Unconfirmed Data Down. Payload is 0x00.
1106 -* **AT+RPL=2:** Device will immediately reply message to Confirmed Data Down. Payload is 0x00 and requied response header for this command.
1107 -* **AT+RPL=3:** Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command.
1108 -* **AT+RPL=4: **Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands.
865 +* AT+RPL=0: Device won't immediately reply any downlink commands from platform.
866 +* AT+RPL=1: Device will immediately reply message to Unconfirmed Data Down. Payload is 0x00.
867 +* AT+RPL=2: Device will immediately reply message to Confirmed Data Down. Payload is 0x00 and requied response header for this command.
868 +* AT+RPL=3: Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command.
869 +* AT+RPL=4: Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands.
1109 1109  
1110 1110  Case Analyes:
1111 1111  
... ... @@ -1113,44 +1113,37 @@
1113 1113  * For Class C devices used in ChirpStack, need to set AT+RPL=4 because Chirpstack require immedietely reply message to MAC Command.
1114 1114  * For Class C devices used in TTI, need to set AT+RPL=4 because TTI require immediately reply message to Confirmed Data Down & MAC Command.
1115 1115  
1116 -{{info}}
1117 -**AT Command: AT+RPL**
1118 -{{/info}}
877 +AT Command: AT+RPL
1119 1119  
1120 -(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1121 -|=(% colspan="3" style="width: 533px;" %)AT+RPL
1122 -|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1123 -|(% style="width:160px" %)AT+RPL=?|(% style="width:263px" %)Get packet receiving response level|(% style="width:109px" %)1(((
879 +|=(% colspan="3" %)AT+RPL
880 +|**Command Example**|**Function**|**Response**
881 +|AT+RPL=?|Get packet receiving response level|1(((
1124 1124  OK
1125 1125  )))
1126 -|(% style="width:160px" %)AT+RPL=0|(% style="width:263px" %)Set packet receiving response level|(% style="width:109px" %)OK
884 +|AT+RPL=0|Set packet receiving response level|OK
1127 1127  
1128 -{{info}}
1129 -**Downlink Command: 0x21**
1130 -{{/info}}
886 +Downlink Command: 0x21
1131 1131  
1132 1132  Format: Command Code (0x21) followed by 1 bytes level value.
1133 1133  
1134 1134  If the downlink payload=2101, it means set packet receiving response level to 1, while type code is 21.
1135 1135  
1136 -* **Example 1**: Downlink Payload: **2101** ~/~/ set packet receiving response level to 1
1137 -* **Example 2**: Downlink Payload: **2102** ~/~/ set packet receiving response level to 2
892 +* Example 1: Downlink Payload: 2101 ~/~/ set packet receiving response level to 1
893 +* Example 2: Downlink Payload: 2102 ~/~/ set packet receiving response level to 2
1138 1138  
1139 1139  = 8. AT Commands Combination =
1140 1140  
1141 1141  == 8.1 Set a fix RX2DR for downlink window ==
1142 1142  
1143 -* **AT+ADR=0 **~-~-> Disable ADR first
1144 -* **AT+RX2DR=xxxx** ~-~-> Set xxxx to your wanted DataRate
899 +* AT+ADR=0 ~-~-> Disable ADR first
900 +* AT+RX2DR=xxxx ~-~-> Set xxxx to your wanted DataRate
1145 1145  
1146 1146  == 8.2 Use Downlink Command to set a fix uplink DR ==
1147 1147  
1148 -{{info}}
1149 -**Downlink Command: 0x22000500**
1150 -{{/info}}
904 +Downlink Command: 0x22000500
1151 1151  
1152 1152  Same as:
1153 1153  
1154 -* AT+ADR=0  [[Reference>>||anchor="H7.1AdaptiveDataRate"]]
1155 -* AT+DR=5  [[Reference>>||anchor="H7.4DataRate"]]
1156 -* AT+TXP=0  [[Reference>>||anchor="H7.14TransmitPower"]]
908 +* AT+ADR=0 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Adaptive_Data_Rate]]
909 +* AT+DR=5 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Data_Rate]]
910 +* AT+TXP=0 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Transmit_Power]]
image-20220511120050-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -136.3 KB
Content
image-20220526162535-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -149.4 KB
Content

Applications

Navigation

Copyright ©2010-2022 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0