Changes for page End Device AT Commands and Downlink Command
Last modified by kai on 2024/09/06 10:00
Summary
-
Page properties (1 modified, 0 added, 0 removed)
-
Attachments (0 modified, 0 added, 2 removed)
Details
- Page properties
-
- Content
-
... ... @@ -1,9 +1,8 @@ 1 - **Contents：**1 +Contens 2 2 3 3 {{toc/}} 4 4 5 5 6 - 7 7 = 1. Introduction = 8 8 9 9 Dragino LoRaWAN End Node support two types of AT Commands and Downlink Commands: ... ... @@ -11,96 +11,34 @@ 11 11 * **Common Commands:** They should be available for each sensor, such as: change uplink interval, reset device. 12 12 * **Sensor Related Commands:** Only for special sensor, such as control relay, poll RS485 device. 13 13 14 -((( 15 15 **This page shows the common commands since Dragino LoRaWAN stack DR-LWS-005. Make sure the end node support stack higher than DR-LWS-005 before checking this page.** 16 16 17 -))) 18 18 19 19 = 2. How to use AT Commands or Downlink command = 20 20 21 21 * For AT Command , See Devices User Manual for Device. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]] 22 22 * For LoRaWAN Downlink: The gateway transfer downlink command in HEX format. This page shows the HEX format downlink code for each command. but some servers use base64 as downlink code. Below are reference for how to use downlink command: 23 -** Use HEX format to send a downlink: [[TTN v3>>Notes 24 -** Use Base64 format to send a downlink: [[Chirpstack>>Notes 25 -** See use note for more serves [[Servers Note>>doc :Main.WebHome]](IoT LoRaWANServer)20 +** Use HEX format to send a downlink: [[TTN v3>>url:https://wiki.dragino.com/index.php/Notes_for_TTN#Send_Downlink_message]] 21 +** Use Base64 format to send a downlink: [[Chirpstack>>url:https://wiki.dragino.com/index.php/Notes_for_ChirpStack#Downlink]]. 22 +** See use note for more serves [[Servers Note>>url:https://wiki.dragino.com/index.php/Main_Page#Use_Note_for_Server]] 26 26 27 - 28 - 29 29 = 3. Support End Node and firmware version = 30 30 31 -(% border="1" style="background-color:#ffffcc; color:green; width:966px" %) 32 -|=(% colspan="3" style="width: 963px;" %)((( 33 -Dragino STM32 base hardware Firmware / LoRaWAN stack list 34 -))) 35 -|(% style="width:187px" %)((( 36 -**Model** 37 -)))|(% style="width:330px" %)((( 38 -**Description** 39 -)))|(% style="width:445px" %)((( 40 -**Firmware Version <~-~-> Stack Version** 41 -))) 42 -|(% style="width:187px" %)((( 43 -[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]], 44 -)))|(% style="width:330px" %)((( 45 -Open Source Generic LoRaWAN Sensor Node 46 -)))|(% style="width:445px" %)((( 47 -((( 48 -LSN50 v1.6.0 <~-~-> DR-LWS-003; 49 -))) 50 - 51 -((( 52 -((( 26 +(% border="1" style="background-color:#ffffcc; color:green; width:772.222px" %) 27 +|=(% colspan="3" style="width: 769px;" %) Dragino STM32 base hardware Firmware / LoRaWAN stack list 28 +|(% style="width:187px" %)**Model**|(% style="width:223px" %)**Description**|(% style="width:359px" %)**Firmware Version <~-~-> Stack Version** 29 +|(% style="width:187px" %)[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],|(% style="width:223px" %)Open Source Generic LoRaWAN Sensor Node|(% style="width:359px" %)LSN50 v1.6.0 <~-~-> DR-LWS-003;((( 53 53 LSN50 v1.7.0 <~-~-> DR-LWS-005; ~-~-> Support since this version 54 54 ))) 55 -))) 56 -))) 57 -|(% style="width:187px" %)((( 58 -[[LGT92>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/142-lgt-92.html]], 59 -)))|(% style="width:330px" %)((( 60 -LoRaWAN GPS Tracker 61 -)))|(% style="width:445px" %)((( 62 -((( 63 -LGT92 v1.6.3 <~-~-> DR-LWS-003; 64 -))) 65 - 66 -((( 67 -((( 32 +|(% style="width:187px" %)[[LGT92>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/142-lgt-92.html]],|(% style="width:223px" %)LoRaWAN GPS Tracker|(% style="width:359px" %)LGT92 v1.6.3 <~-~-> DR-LWS-003;((( 68 68 LGT92 v1.6.4 <~-~-> DR-LWS-005;~-~-> Support since this version 69 69 ))) 70 -))) 71 -))) 72 -|(% style="width:187px" %)((( 73 -[[LBT1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/165-lbt1.html]], 74 -)))|(% style="width:330px" %)((( 75 -LoRaWAN BLE Indoor Tracker 76 -)))|(% style="width:445px" %)((( 77 -LBT1 v1.0 <~-~-> DR-LWS-005; 78 -))) 79 -|(% style="width:187px" %)((( 80 -[[RS485-LN>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/154-rs485-ln.html]], 81 -)))|(% style="width:330px" %)((( 82 -LoRaWAN RS485 Modbus Converter 83 -)))|(% style="width:445px" %)((( 84 -RS485-LN v1.3 <~-~-> DR-LWS-005; 85 -))) 86 -|(% style="width:187px" %)((( 87 -[[LHT65>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/151-lht65.html]], 88 -)))|(% style="width:330px" %)((( 89 -LoRaWAN Temperature & Humidity Sensor 90 -)))|(% style="width:445px" %)((( 91 -((( 92 -LHT65 v1.7 <~-~-> DR-LWS-003; 93 -))) 94 - 95 -((( 96 -((( 35 +|(% style="width:187px" %)[[LBT1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/165-lbt1.html]],|(% style="width:223px" %)LoRaWAN BLE Indoor Tracker|(% style="width:359px" %)LBT1 v1.0 <~-~-> DR-LWS-005; 36 +|(% style="width:187px" %)[[RS485-LN>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/154-rs485-ln.html]],|(% style="width:223px" %)LoRaWAN RS485 Modbus Converter|(% style="width:359px" %)RS485-LN v1.3 <~-~-> DR-LWS-005; 37 +|(% style="width:187px" %)[[LHT65>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/151-lht65.html]],|(% style="width:223px" %)LoRaWAN Temperature & Humidity Sensor|(% style="width:359px" %)LHT65 v1.7 <~-~-> DR-LWS-003;((( 97 97 LHT65 v1.8.0 <~-~-> DR-LWS-005;~-~-> Support since this version 98 98 ))) 99 -))) 100 -))) 101 101 102 - 103 - 104 104 = 4. System Management Commands = 105 105 106 106 == 4.1 Change Uplink Interval == ... ... @@ -109,44 +109,36 @@ 109 109 110 110 (% class="box infomessage" %) 111 111 ((( 112 - **AT Command: AT+TDC**49 +AT Command: AT+TDC 113 113 ))) 114 114 115 -(% border="1" style="background-color:#ffffcc; color:green; width: 727.222px" %)116 -|=(% colspan="3" style="width: 724px;" %)AT+TDC117 -|(% style="width:165px" %)**Command Example**|(% style="width: 227px" %)**Function**|(% style="width:329px" %)**Response**118 -|(% style="width:165px" %)AT+TDC=?|(% style="width: 227px" %)Show current transmit Interval|(% style="width:329px" %)30000(((52 +(% border="1" style="background-color:#ffffcc; color:green; width:566.222px" %) 53 +|=(% colspan="3" style="width: 563px;" %) AT+TDC 54 +|(% style="width:165px" %)**Command Example**|(% style="width:170px" %)**Function**|(% style="width:226px" %)**Response** 55 +|(% style="width:165px" %)AT+TDC=?|(% style="width:170px" %)Show current transmit Interval|(% style="width:226px" %)30000((( 119 119 OK 120 120 121 121 the interval is 30000ms = 30s 122 122 ))) 123 -|(% style="width:165px" %)AT+TDC=60000|(% style="width: 227px" %)Set Transmit Interval|(% style="width:329px" %)OK(((60 +|(% style="width:165px" %)AT+TDC=60000|(% style="width:170px" %)Set Transmit Interval|(% style="width:226px" %)OK((( 124 124 Set transmit interval to 60000ms = 60 seconds 125 125 ))) 126 126 127 -{{info}} 128 128 **Downlink Command: 0x01** 129 -{{/info}} 130 130 131 -((( 132 132 Format: Command Code (0x01) followed by 3 bytes time value. 133 -))) 134 134 135 -((( 136 136 If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01. 137 -))) 138 138 139 139 * **Example 1**: Downlink Payload:** 0100001E** ~/~/ Set Transmit Interval (TDC) = 30 seconds 140 140 * **Example 2**: Downlink Payload:** 0100003C** ~/~/ Set Transmit Interval (TDC) = 60 seconds 141 141 142 - 143 - 144 144 == 4.2 Reboot End Node == 145 145 146 146 Feature: Reboot End Node to perform a new OTAA or ABP Join. 147 147 148 148 {{info}} 149 - **AT Command: ATZ**78 +AT Command: ATZ 150 150 {{/info}} 151 151 152 152 (% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %) ... ... @@ -166,56 +166,35 @@ 166 166 <followed by the Tx and Rx information> 167 167 ))) 168 168 169 -{{info}} 170 -**Downlink Command: 0x04** 171 -{{/info}} 98 +Downlink Command: 0x04 172 172 173 -((( 174 174 Format: Command Code (0x04) followed by FF. 175 -))) 176 176 177 -((( 178 -If the downlink payload=**04FF**, the end node will reboot. 102 +If the downlink payload=04FF, the end node will reboot. 179 179 180 - 181 -))) 182 - 183 183 == 4.3 Reset to factory Default == 184 184 185 185 Feature: Reset the parameters to Factory Default, factory default value depends on the firmware settings, the OTAA and ABP keys will reserve after this command. 186 186 187 -{{info}} 188 -**AT Command: AT+FDR** 189 -{{/info}} 108 +AT Command: AT+FDR 190 190 191 -(% border="1" style="background-color:#ffffcc; color:green; width:831.222px" %) 192 -|=(% colspan="3" style="width: 828px;" %)Reset to factory default 193 -|(% style="width:181px" %)**Command Example**|(% style="width:181px" %)**Function**|(% style="width:465px" %)**Response** 194 -|(% style="width:181px" %)AT+FDR|(% style="width:181px" %)Reset to factory default|(% style="width:465px" %)((( 195 -Device reset to factory default parameters and show booting info 110 +|=(% colspan="3" %)Reset to factory default 111 +|**Command Example**|**Function**|**Response** 112 +|AT+FDR|Reset to factory default|Device reset to factory default parameters and show booting info 196 196 197 -LSN50 Device/LoRa ST Module 198 - 114 +{{{LSN50 Device/LoRa ST Module 199 199 Image Version: XX 200 - 201 201 Frequency Band: XX 202 - 203 203 DevEui= XX XX XX XX XX XX XX XX 204 - 205 205 Please set the parameters or reset Device to apply change 206 - )))119 +}}} 207 207 208 -{{info}} 209 -**Downlink Command: 0x04** 210 -{{/info}} 211 211 212 -((( 122 +Downlink Command: 0x04 123 + 213 213 Format: Command Code (0x04) followed by FE. 214 -))) 215 215 216 -((( 217 -If the downlink payload=**04FE**, Reset Parameters to Factory Default, Keys Reserve. 218 -))) 126 +If the downlink payload=04FE, Reset Parameters to Factory Default, Keys Reserve. 219 219 220 220 221 221 == 4.4 Show Firmware Version == ... ... @@ -222,42 +222,30 @@ 222 222 223 223 Feature: Show firmware version. No downlink command yet. 224 224 225 -{{info}} 226 -**AT Command: AT+VER** 227 -{{/info}} 133 +AT Command: AT+VER 228 228 229 -(% border="1" style="background-color:#ffffcc; color:green; width:586px" %) 230 -|=(% colspan="3" style="width: 583px;" %)AT+VER: Image Version and Frequency Band 231 -|(% style="width:170px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:113px" %)**Response** 232 -|(% style="width:170px" %)AT+VER=?|(% style="width:300px" %)Show Image version and Frequency Band|(% style="width:113px" %)((( 233 -1.3 EU868 135 +|=(% colspan="3" %)AT+VER: Image Version and Frequency Band 136 +|**Command Example**|**Function**|**Response** 137 +|AT+VER=?|Show Image version and Frequency Band| 234 234 139 +{{{1.3 EU868 235 235 OK 236 - )))141 +}}} 237 237 238 -{{info}} 239 -**Downlink Command: 0x26 (Valid in 006 stack)** 240 -{{/info}} 241 241 242 -((( 144 +Downlink Command: 0x26 (Valid in 006 stack) 145 + 243 243 Downlink Format: 0x26 244 -))) 245 245 246 -((( 247 247 Device will reply with firmware version info, device info. frequency band info. detail please check device user manual. Total 5 bytes Example: If device is of firmware version 1.1.0 Upload: xx ~-~- yy ~-~- zz ~-~- 110 total 5 bytes 248 -))) 249 249 250 -((( 251 -**xx: Software Type:** 252 -))) 150 +xx: Software Type: 253 253 254 254 * 0x00 01: LGT92 Version 255 255 * 0x00 02: LBT1 256 256 * 0x00 03: LSE01/LDDS75/LDDS20/LSPH01/LLMS01/LSNPK01 257 257 258 -((( 259 -**yy: Frequency Band:** 260 -))) 156 +yy: Frequency Band: 261 261 262 262 * 0x01: EU868 263 263 * 0x02: US915 ... ... @@ -270,9 +270,7 @@ 270 270 * 0x09: AS923-2 271 271 * 0xa0: AS923-3 272 272 273 -((( 274 -**zz: Subband** 275 -))) 169 +zz: Subband 276 276 277 277 firmware version: v1.1.0 ~-~-> 110 278 278 ... ... @@ -281,29 +281,21 @@ 281 281 282 282 Feature: Show All configure. No downlink command yet. 283 283 284 -{{info}} 285 -**AT Command: AT+CFG** 286 -{{/info}} 178 +AT Command: AT+CFG 287 287 288 -(% border="1" style="background-color:#ffffcc; color:green; width:599.222px" %) 289 -|=(% colspan="3" style="width: 596px;" %)AT+CFG: Print all configurations 290 -|(% style="width:160px" %)**Command Example**|(% style="width:154px" %)**Function**|(% style="width:280px" %)**Response** 291 -|(% style="width:160px" %)AT+CFG|(% style="width:154px" %)Show all configures|(% style="width:280px" %)((( 292 -AT+DEUI = XX XX XX XX XX XX XX XX 180 +|=(% colspan="3" %)AT+CFG: Print all configurations 181 +|**Command Example**|**Function**|**Response** 182 +|AT+CFG|Show all configures| 293 293 184 +{{{AT+DEUI = XX XX XX XX XX XX XX XX 294 294 AT+DADDR=XXXXXXXX 295 - 296 296 ………. 297 - 298 298 AT+RX2WTO=X 299 - 300 300 AT+CHS=868100000 301 - 302 302 OK 303 - )))190 +}}} 304 304 305 305 306 - 307 307 = 5. Keys, IDs and EUIs management = 308 308 309 309 == 5.1 Application EUI == ... ... @@ -310,134 +310,99 @@ 310 310 311 311 Feature: Get or Set the Application EUI. 312 312 313 -{{info}} 314 -**AT Command: AT+APPEUI** 315 -{{/info}} 199 +AT Command: AT+APPEUI 316 316 317 -(% border="1" style="background-color:#ffffcc; color:green; width:686.222px" %) 318 -|=(% colspan="3" style="width: 683px;" %)AT+APPEUI 319 -|(% style="width:305px" %)**Command Example**|(% style="width:186px" %)**Function**|(% style="width:191px" %)**Response** 320 -|(% style="width:305px" %)AT+APPEUI=?|(% style="width:186px" %)Get the Application EUI|(% style="width:191px" %)00 b3 d5 00 00 00 00 00((( 201 +|=(% colspan="3" %)AT+APPEUI 202 +|**Command Example**|**Function**|**Response** 203 +|AT+APPEUI=?|Get the Application EUI|00 b3 d5 00 00 00 00 00((( 321 321 OK 322 322 ))) 323 -| (% style="width:305px" %)AT+APPEUI=00 b3 d5 7e f0 00 4d 34|(% style="width:186px" %)Set the Application EUI|(% style="width:191px" %)OK206 +|AT+APPEUI=00 b3 d5 7e f0 00 4d 34|Set the Application EUI|OK 324 324 325 - 326 - 327 327 == 5.2 Application Key == 328 328 329 329 Feature: Get or Set the Application Key. 330 330 331 -{{info}} 332 -**AT Command: AT+APPKEY** 333 -{{/info}} 212 +AT Command: AT+APPKEY 334 334 335 -(% border="1" style="background-color:#ffffcc; color:green; width:976.222px" %) 336 -|=(% colspan="3" style="width: 973px;" %)AT+APPKEY 337 -|(% style="width:441px" %)**Command Example**|(% style="width:180px" %)**Function**|(% style="width:350px" %)**Response** 338 -|(% style="width:441px" %)AT+APPKEY=?|(% style="width:180px" %)Get the Application Key|(% style="width:350px" %)00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35((( 214 +|=(% colspan="3" %)AT+APPKEY 215 +|**Command Example**|**Function**|**Response** 216 +|AT+APPKEY=?|Get the Application Key|00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35((( 339 339 OK 340 340 ))) 341 -| (% style="width:441px" %)AT+APPKEY=00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35|(% style="width:180px" %)Set the Application Key|(% style="width:350px" %)OK219 +|AT+APPKEY=00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35|Set the Application Key.|OK 342 342 343 - 344 - 345 345 == 5.3 Application Session Key == 346 346 347 347 Feature: Get or Set the Application Session Key. 348 348 349 -{{info}} 350 -**AT Command: AT+APPSKEY** 351 -{{/info}} 225 +AT Command: AT+APPSKEY 352 352 353 -(% border="1" style="background-color:#ffffcc; color:green; width:1040.22px" %) 354 -|=(% colspan="3" style="width: 1037px;" %)AT+APPSKEY 355 -|(% style="width:451px" %)**Command Example**|(% style="width:231px" %)**Function**|(% style="width:354px" %)**Response** 356 -|(% style="width:451px" %)AT+APPSKEY=?|(% style="width:231px" %)Get the Application Session Key|(% style="width:354px" %)00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2((( 227 +|=(% colspan="3" %)AT+APPSKEY 228 +|**Command Example**|**Function**|**Response** 229 +|AT+APPSKEY=?|Get the Application Session Key|00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2((( 357 357 OK 358 358 ))) 359 -| (% style="width:451px" %)AT+APPSKEY=00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2|(% style="width:231px" %)Set the Application Session Key|(% style="width:354px" %)(While Error in format, return AT_PARAM_ERROR)(((232 +|AT+APPSKEY=00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2|Set the Application Session Key.|(While Error in format, return AT_PARAM_ERROR)((( 360 360 OK 361 361 ))) 362 362 363 - 364 - 365 365 == 5.4 Device Address == 366 366 367 367 Feature: Get or Set the Device Address. 368 368 369 -{{info}} 370 -**AT Command: AT+DADDR** 371 -{{/info}} 240 +AT Command: AT+DADDR 372 372 373 -(% border="1" style="background-color:#ffffcc; color:green; width:795.222px" %) 374 -|=(% colspan="3" style="width: 792px;" %)AT+DADDR 375 -|(% style="width:192px" %)**Command Example**|(% style="width:241px" %)**Function**|(% style="width:359px" %)**Response** 376 -|(% style="width:192px" %)AT+DADDR=?|(% style="width:241px" %)Get the Application Session Key.|(% style="width:359px" %)(While Error in format, return AT_PARAM_ERROR)((( 242 +|=(% colspan="3" %)AT+DADDR 243 +|**Command Example**|**Function**|**Response** 244 +|AT+DADDR=?|Get the Application Session Key.|(While Error in format, return AT_PARAM_ERROR)((( 377 377 A8 40 41 FF 378 378 379 379 OK 380 380 ))) 381 -| (% style="width:192px" %)AT+DADDR=A8 40 41 FF|(% style="width:241px" %)Set the Application Session Key.|(% style="width:359px" %)OK249 +|AT+DADDR=A8 40 41 FF|Set the Application Session Key.|OK 382 382 383 - 384 - 385 385 == 5.5 Device EUI == 386 386 387 387 Feature: Get or Set the Device EUI. 388 388 389 -{{info}} 390 -**AT Command: AT+DEUI** 391 -{{/info}} 255 +AT Command: AT+DEUI 392 392 393 -(% border="1" style="background-color:#ffffcc; color:green; width:1035.22px" %) 394 -|=(% colspan="3" style="width: 1032px;" %)AT+DEUI 395 -|(% style="width:250px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:634px" %)**Response** 396 -|(% style="width:250px" %)AT+DEUI=?|(% style="width:147px" %)Get the Device EUI.|(% style="width:634px" %)00 44 34 22 33 45 55 55((( 257 +|=(% colspan="3" %)AT+DEUI 258 +|**Command Example**|**Function**|**Response** 259 +|AT+DEUI=?|Get the Device EUI.|00 44 34 22 33 45 55 55((( 397 397 OK 398 398 ))) 399 -| (% style="width:250px" %)AT+DEUI=A8 40 41 FF FF 12 34 56|(% style="width:147px" %)Set the Device EUI.|(% style="width:634px" %)(System will write new value to Device EUI,While Error in format, return AT_PARAM_ERROR)(((262 +|AT+DEUI=A8 40 41 FF FF 12 34 56|Set the Device EUI.|(System will write new value to Device EUI,While Error in format, return AT_PARAM_ERROR)((( 400 400 OK 401 401 ))) 402 402 403 - 404 - 405 405 == 5.6 Network ID == 406 406 407 407 Feature: Get or Set the Network ID.(You can enter this command change only after successful network connection) 408 408 409 -{{info}} 410 -**AT Command: AT+NWKID** 411 -{{/info}} 270 +AT Command: AT+NWKID 412 412 413 -(% border="1" style="background-color:#ffffcc; color:green; width:448.222px" %) 414 -|=(% colspan="3" style="width: 445px;" %)AT+NWKID 415 -|(% style="width:191px" %)**Command Example**|(% style="width:153px" %)**Function**|(% style="width:101px" %)**Response** 416 -|(% style="width:191px" %)AT+NWKID=?|(% style="width:153px" %)Get the Network ID.|(% style="width:101px" %)a8 40 41 ff((( 272 +|=(% colspan="3" %)AT+NWKID 273 +|**Command Example**|**Function**|**Response** 274 +|AT+NWKID=?|Get the Network ID.|a8 40 41 ff((( 417 417 OK 418 418 ))) 419 -| (% style="width:191px" %)AT+NWKID=A8 40 41 FF|(% style="width:153px" %)Set the Network ID.|(% style="width:101px" %)OK277 +|AT+NWKID=A8 40 41 FF|Set the Network ID.|OK 420 420 421 - 422 - 423 423 == 5.7 Network Session Key == 424 424 425 425 Feature: Get or Set the Network Session Key 426 426 427 -{{info}} 428 -**AT Command: AT+NWKSKEY** 429 -{{/info}} 283 +AT Command: AT+NWKSKEY 430 430 431 -(% border="1" style="background-color:#ffffcc; color:green; width:1017.22px" %) 432 -|=(% colspan="3" style="width: 1014px;" %)AT+NWKSKEY 433 -|(% style="width:455px" %)**Command Example**|(% style="width:215px" %)**Function**|(% style="width:343px" %)**Response** 434 -|(% style="width:455px" %)AT+NWKSKEY=?|(% style="width:215px" %)Get the Network Session Key.|(% style="width:343px" %)00 4f 19 25 52 ce 97 09 d7 fa 84 71 db 51 02 92((( 285 +|=(% colspan="3" %)AT+NWKSKEY 286 +|**Command Example**|**Function**|**Response** 287 +|AT+NWKSKEY=?|Get the Network Session Key.|00 4f 19 25 52 ce 97 09 d7 fa 84 71 db 51 02 92((( 435 435 OK 436 436 ))) 437 -| (% style="width:455px" %)AT+NWKSKEY=A8 40 41 FF FF 12 34 56 00 01 02 04 05 06 06 07|(% style="width:215px" %)Set the Network Session Key.|(% style="width:343px" %)OK290 +|AT+NWKSKEY=A8 40 41 FF FF 12 34 56 00 01 02 04 05 06 06 07|Set the Network Session Key.|OK 438 438 439 - 440 - 441 441 = 6. Joining and sending date on LoRaWAN network = 442 442 443 443 == 6.1 Confirm Mode == ... ... @@ -444,18 +444,15 @@ 444 444 445 445 Feature: Get or Set the confirmation mode (0-1). 446 446 447 -{{info}} 448 -**AT Command: AT+CFM** 449 -{{/info}} 298 +AT Command: AT+CFM 450 450 451 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %) 452 -|=(% colspan="3" style="width: 707px;" %)AT+CFM 453 -|(% style="width:155px" %)**Command Example**|(% style="width:205px" %)**Function**|(% style="width:346px" %)**Response** 454 -|(% style="width:155px" %)AT+CFM=?|(% style="width:205px" %)Get the confirmation mode|(% style="width:346px" %)0((( 300 +|=(% colspan="3" %)AT+CFM 301 +|**Command Example**|**Function**|**Response** 302 +|AT+CFM=?|Get the confirmation mode|0((( 455 455 OK 456 456 ))) 457 -| (% style="width:155px" %)AT+CFM=1|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)OK458 -| (% style="width:155px" %)AT+CFM=2|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)While Error in format, return AT_PARAM_ERROR305 +|AT+CFM=1|Set the confirmation mode|OK 306 +|AT+CFM=2|Set the confirmation mode|While Error in format, return AT_PARAM_ERROR 459 459 460 460 Downlink Command: 0x05 461 461 ... ... @@ -466,137 +466,100 @@ 466 466 * Example 1: Downlink Payload: 0501 ~/~/ Set AT+CFM=1 467 467 * Example 2: Downlink Payload: 0500 ~/~/ Set AT+CFM=0 468 468 469 - 470 - 471 471 == 6.2 Confirm Status == 472 472 473 473 Feature: Get confirmation status of the last AT+SEND (0-1). 474 474 475 -{{info}} 476 -**AT Command: AT+CFS** 477 -{{/info}} 321 +AT Command: AT+CFS 478 478 479 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %) 480 -|=(% colspan="3" style="width: 531px;" %)AT+CFS 481 -|(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:178px" %)**Response** 482 -|(% style="width:156px" %)AT+CFS=?|(% style="width:193px" %)Get confirmation status|(% style="width:178px" %)0((( 323 +|=(% colspan="3" %)AT+CFS 324 +|**Command Example**|**Function**|**Response** 325 +|AT+CFS=?|Get confirmation status|0((( 483 483 OK 484 484 ))) 485 485 486 - 487 - 488 488 == 6.3 Join LoRa® Network == 489 489 490 490 Feature: Join network. 491 491 492 -{{info}} 493 -**AT Command: AT+JOIN** 494 -{{/info}} 333 +AT Command: AT+JOIN 495 495 496 -(% border="1" style="background-color:#ffffcc; color:green; width:647.222px" %) 497 -|=(% colspan="3" style="width: 644px;" %)AT+JOIN 498 -|(% style="width:163px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:334px" %)**Response** 499 -|(% style="width:163px" %)AT+JOIN ?|(% style="width:147px" %)Get imformation.|(% style="width:334px" %)AT+JOIN: Join network((( 335 +|=(% colspan="3" %)AT+JOIN 336 +|**Command Example**|**Function**|**Response** 337 +|AT+JOIN ?|Get imformation.|AT+JOIN: Join network((( 500 500 OK 501 501 502 502 While Error in format, return AT_BUSY_ERROR 503 503 ))) 504 504 505 - 506 - 507 507 == 6.4 LoRa® Network Join Mode == 508 508 509 509 Feature: Get or Set the Network Join Mode. (0: ABP, 1: OTAA). 510 510 511 -{{info}} 512 -**AT Command: AT+NJM** 513 -{{/info}} 347 +AT Command: AT+NJM 514 514 515 -(% border="1" style="background-color:#ffffcc; color:green; width:753.222px" %) 516 -|=(% colspan="3" style="width: 750px;" %)AT+NJM 517 -|(% style="width:162px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:361px" %)**Response** 518 -|(% style="width:162px" %)AT+NJM=?|(% style="width:227px" %)Get the Network Join Mode|(% style="width:361px" %)1((( 349 +|=(% colspan="3" %)AT+NJM 350 +|**Command Example**|**Function**|**Response** 351 +|AT+NJM=?|Get the Network Join Mode|1((( 519 519 OK 520 520 ))) 521 -| (% style="width:162px" %)AT+NJM=0|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)OK522 -| (% style="width:162px" %)AT+NJM=2|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)While Error in format, return AT_PARAM_ERROR354 +|AT+NJM=0|Set the Network Join Mode|OK 355 +|AT+NJM=2|Set the Network Join Mode|While Error in format, return AT_PARAM_ERROR 523 523 524 -{{info}} 525 -**Downlink Command: 0x20** 526 -{{/info}} 357 +Downlink Command: 0x20 527 527 528 528 Format: Command Code (0x20) followed by 1 bytes mode value. 529 529 530 530 If the downlink payload=2000, it means set the Network Join Mode, while type code is 20. 531 531 532 -* **Example 1:**Downlink Payload:**2000**~/~/ Set AT+NJM=O533 -* **Example 2:**Downlink Payload:**2001**~/~/ Set AT+NJM=1363 +* Example 1: Downlink Payload: 2000 ~/~/ Set AT+NJM=O 364 +* Example 2: Downlink Payload: 2001 ~/~/ Set AT+NJM=1 534 534 535 - 536 - 537 537 == 6.5 LoRa® Network Join Status == 538 538 539 539 Feature: LoRa® Network Join Status. 540 540 541 -{{info}} 542 -**AT Command: AT+NJS** 543 -{{/info}} 370 +AT Command: AT+NJS 544 544 545 -(% border="1" style="background-color:#ffffcc; color:green; width:498.222px" %) 546 -|=(% colspan="3" style="width: 495px;" %)AT+NJS 547 -|(% style="width:169px" %)**Command Example**|(% style="width:164px" %)**Function**|(% style="width:161px" %)**Response** 548 -|(% style="width:169px" %)AT+NJS=?|(% style="width:164px" %)Get the join status.|(% style="width:161px" %)0((( 372 +|=(% colspan="3" %)AT+NJS 373 +|**Command Example**|**Function**|**Response** 374 +|AT+NJS=?|Get the join status.|0((( 549 549 OK 550 550 ))) 551 551 552 - 553 - 554 554 == 6.6 Print Last Received Data in Raw Format == 555 555 556 556 Feature: Print Last Received Data in Raw Format<port:data>. 557 557 558 -{{info}} 559 -**AT Command: AT+RECV** 560 -{{/info}} 382 +AT Command: AT+RECV 561 561 562 -(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %) 563 -|=(% colspan="3" style="width: 584px;" %)AT+RECV 564 -|(% style="width:161px" %)**Command Example**|(% style="width:272px" %)**Function**|(% style="width:150px" %)**Response** 565 -|(% style="width:161px" %)AT+RECV=?|(% style="width:272px" %)print last received data in raw format.|(% style="width:150px" %)0:((( 384 +|=(% colspan="3" %)AT+RECV 385 +|**Command Example**|**Function**|**Response** 386 +|AT+RECV=?|print last received data in raw format.|0:((( 566 566 OK 567 567 ))) 568 568 569 - 570 - 571 571 == 6.7 Print Last Received Data in Binary Format == 572 572 573 573 Feature: Print Last Received Data in Binary Format<port:data>. 574 574 575 -{{info}} 576 -**AT Command: AT+RECVB** 577 -{{/info}} 394 +AT Command: AT+RECVB 578 578 579 -(% border="1" style="background-color:#ffffcc; color:green; width:793.222px" %) 580 -|=(% colspan="3" style="width: 790px;" %)AT+RECVB 581 -|(% style="width:173px" %)**Command Example**|(% style="width:497px" %)**Function**|(% style="width:120px" %)**Response** 582 -|(% style="width:173px" %)AT+RECVB=?|(% style="width:497px" %)print last received data in binary format (with hexadecimal values).|(% style="width:120px" %)2: 0010((( 396 +|=(% colspan="3" %)AT+RECVB 397 +|**Command Example**|**Function**|**Response** 398 +|AT+RECVB=?|print last received data in binary format (with hexadecimal values).|2: 0010((( 583 583 OK 584 584 ))) 585 585 586 - 587 - 588 588 == 6.8 Send Text Data == 589 589 590 590 Feature: Send Text Data<port:data>. 591 591 592 -{{info}} 593 -**AT Command: AT+SEND** 594 -{{/info}} 406 +AT Command: AT+SEND 595 595 596 -(% border="1" style="background-color:#ffffcc; color:green; width:991.222px" %) 597 -|=(% colspan="3" style="width: 988px;" %)AT+SEND 598 -|(% style="width:201px" %)**Command Example**|(% style="width:340px" %)**Function**|(% style="width:446px" %)**Response** 599 -|(% style="width:201px" %)AT+SEND=12:hello world|(% style="width:340px" %)Send text data along with the application port.|(% style="width:446px" %)OK((( 408 +|=(% colspan="3" %)AT+SEND 409 +|**Command Example**|**Function**|**Response** 410 +|AT+SEND=12:hello world|Send text data along with the application port.|OK((( 600 600 While Error in format, return 601 601 602 602 AT_BUSY_ERROR/AT_BUSY_ERROR/AT_NO_NETWORK_JOINED ... ... @@ -604,28 +604,21 @@ 604 604 605 605 ))) 606 606 607 - 608 - 609 609 == 6.9 Send Hexadecimal Data == 610 610 611 611 Feature: Send hexadecimal data along with the application port. 612 612 613 -{{info}} 614 -**AT Command: AT+SENDB** 615 -{{/info}} 422 +AT Command: AT+SENDB 616 616 617 -(% border="1" style="background-color:#ffffcc; color:green; width:1120.22px" %) 618 -|=(% colspan="3" style="width: 1117px;" %)AT+SENDB 619 -|(% style="width:257px" %)**Command Example**|(% style="width:406px" %)**Function**|(% style="width:453px" %)**Response** 620 -|(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)OK 621 -|(% style="width:257px" %)AT+SENDB=abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)While Error in format, return((( 424 +|=(% colspan="3" %)AT+SENDB 425 +|**Command Example**|**Function**|**Response** 426 +|AT+SENDB=12:abcdef0123456789|Send hexadecimal data along with the application port.|OK 427 +|AT+SENDB=abcdef0123456789|Send hexadecimal data along with the application port.|While Error in format, return((( 622 622 AT_PARAM_ERROR AT_BUSY_ERROR/AT_NO_NETWORK_JOINED 623 623 624 624 625 625 ))) 626 626 627 - 628 - 629 629 = 7. LoRaWAN network management = 630 630 631 631 == 7.1 Adaptive Data Rate == ... ... @@ -632,118 +632,92 @@ 632 632 633 633 Feature: Get or Set the Adaptive Data Rate setting. (0: off, 1: on). 634 634 635 -{{info}} 636 -**AT Command: AT+ADR** 637 -{{/info}} 638 638 639 -(% border="1" style="background-color:#ffffcc; color:green; width:683.222px" %) 640 -|=(% colspan="3" style="width: 680px;" %)AT+ADR 641 -|(% style="width:162px" %)**Command Example**|(% style="width:266px" %)**Function**|(% style="width:250px" %)**Response** 642 -|(% style="width:162px" %)AT+ADR=?|(% style="width:266px" %)Get the Adaptive Data Rate setting.|(% style="width:250px" %)1((( 440 +AT Command: AT+ADR 441 + 442 +|=(% colspan="3" %)AT+ADR 443 +|**Command Example**|**Function**|**Response** 444 +|AT+ADR=?|Get the Adaptive Data Rate setting.|1((( 643 643 OK 644 644 ))) 645 -| (% style="width:162px" %)AT+ADR=0|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:250px" %)OK646 -| (% style="width:162px" %)AT+ADR=2|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:250px" %)While Error in format, return(((447 +|AT+ADR=0|Set the Adaptive Data Rate setting.|OK 448 +|AT+ADR=2|Set the Adaptive Data Rate setting.|While Error in format, return((( 647 647 AT_PARAM_ERROR 648 648 ))) 649 649 650 -{{info}} 651 -**Downlink Command: 0x22** 652 -{{/info}} 452 +Downlink Command: 0x22 653 653 654 654 655 655 If the downlink payload=2201, it means setting the adaptive data rate to 1, while type code is 22. 656 656 657 -* **Example 1**: Downlink Payload:**2201**~/~/ Set AT+ADR=1.658 -* **Example 2**: Downlink Payload:**2200FFFF**~/~/ Set AT+ADR=0.457 +* Example 1: Downlink Payload: 2201 ~/~/ Set AT+ADR=1. 458 +* Example 2: Downlink Payload: 2200FFFF ~/~/ Set AT+ADR=0. 659 659 660 - 661 - 662 662 == 7.2 LoRa® Class == 663 663 664 664 Feature: Get or Set the Device Class(Currently only support class A, class C). 665 665 666 -{{info}} 667 -**AT Command:AT+CLASS** 668 -{{/info}} 464 +AT Command:AT+CLASS 669 669 670 -(% border="1" style="background-color:#ffffcc; color:green; width:507.222px" %) 671 -|=(% colspan="3" style="width: 504px;" %)AT+CLASS 672 -|(% style="width:163px" %)**Command Example**|(% style="width:166px" %)**Function**|(% style="width:175px" %)**Response** 673 -|(% style="width:163px" %)AT+CLASS=?|(% style="width:166px" %)Get the Device Class.|(% style="width:175px" %)A((( 466 +|=(% colspan="3" %)AT+CLASS 467 +|**Command Example**|**Function**|**Response** 468 +|AT+CLASS=?|Get the Device Class.|A((( 674 674 OK 675 675 ))) 676 -| (% style="width:163px" %)AT+CLASS=C|(% style="width:166px" %)Set the Device Class.|(% style="width:175px" %)OK(((471 +|AT+CLASS=C|Set the Device Class.|OK((( 677 677 678 678 ))) 679 679 680 - 681 - 682 682 == 7.3 Duty Cycle Setting == 683 683 684 684 Feature: Get or Set the ETSI Duty Cycle setting - 0=disable, 1=enable - Only for testing. 685 685 686 -{{info}} 687 -**AT Command:AT+DCS** 688 -{{/info}} 479 +AT Command:AT+DCS 689 689 690 -(% border="1" style="background-color:#ffffcc; color:green; width:515.222px" %) 691 -|=(% colspan="3" style="width: 512px;" %)AT+DCS 692 -|(% style="width:165px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:107px" %)**Response** 693 -|(% style="width:165px" %)AT+DCS=?|(% style="width:239px" %)Get the ETSI Duty Cycle setting.|(% style="width:107px" %)1((( 481 +|=(% colspan="3" %)AT+DCS 482 +|**Command Example**|**Function**|**Response** 483 +|AT+DCS=?|Get the ETSI Duty Cycle setting.|1((( 694 694 OK 695 695 ))) 696 -| (% style="width:165px" %)AT+DCS=1|(% style="width:239px" %)Set the ETSI Duty Cycle setting.|(% style="width:107px" %)OK(((486 +|AT+DCS=1|Set the ETSI Duty Cycle setting.|OK((( 697 697 698 698 ))) 699 699 700 - 701 - 702 702 == 7.4 Data Rate == 703 703 704 704 Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) . Note: while set Data Rate, please use set Adptive Data Rate, ADR=0 first. otherwise device will response to server's ADR command and change the DR to the setting from server 705 705 706 -{{info}} 707 -**AT Command: AT+DR** 708 -{{/info}} 494 +AT Command: AT+DR 709 709 710 -(% border="1" style="background-color:#ffffcc; color:green; width:466.222px" %) 711 -|=(% colspan="3" style="width: 463px;" %)AT+DR 712 -|(% style="width:156px" %)**Command Example**|(% style="width:167px" %)**Function**|(% style="width:140px" %)**Response** 713 -|(% style="width:156px" %)AT+DR=?|(% style="width:167px" %)Get the Data Rate.|(% style="width:140px" %)5((( 496 +|=(% colspan="3" %)AT+DR 497 +|**Command Example**|**Function**|**Response** 498 +|AT+DR=?|Get the Data Rate.|5((( 714 714 OK 715 715 ))) 716 -| (% style="width:156px" %)AT+DR=2|(% style="width:167px" %)Set the Data Rate.|(% style="width:140px" %)OK(((501 +|AT+DR=2|Set the Data Rate.|OK((( 717 717 718 718 ))) 719 719 720 -{{info}} 721 -**Downlink Command: 0x2200aaFF** 722 -{{/info}} 505 +Downlink Command: 0x2200aaFF 723 723 724 724 725 725 If the downlink payload=220001FF, it means setting the data rate to 1, while type code is 22 00 aa FF. 726 726 727 -* **Example 1**: Downlink Payload:**220001FF**~/~/ Set AT+DR=1.728 -* **Example 2**: Downlink Payload:**220000FF**~/~/ Set AT+DR=0.510 +* Example 1: Downlink Payload: 220001FF ~/~/ Set AT+DR=1. 511 +* Example 2: Downlink Payload: 220000FF ~/~/ Set AT+DR=0. 729 729 730 - 731 - 732 732 == 7.5 Frame Counter Downlink == 733 733 734 734 Feature: Get or Set the Frame Counter Downlink. 735 735 736 -{{info}} 737 -**AT Command:AT+FCD** 738 -{{/info}} 517 +AT Command:AT+FCD 739 739 740 -(% border="1" style="background-color:#ffffcc; color:green; width:693.222px" %) 741 -|=(% colspan="3" style="width: 690px;" %)AT+FCD 742 -|(% style="width:162px" %)**Command Example**|(% style="width:258px" %)**Function**|(% style="width:269px" %)**Response** 743 -|(% style="width:162px" %)AT+FCD=?|(% style="width:258px" %)Get the Frame Counter Downlink.|(% style="width:269px" %)0((( 519 +|=(% colspan="3" %)AT+FCD 520 +|**Command Example**|**Function**|**Response** 521 +|AT+FCD=?|Get the Frame Counter Downlink.|0((( 744 744 OK 745 745 ))) 746 -| (% style="width:162px" %)AT+FCD=10|(% style="width:258px" %)Set the Frame Counter Downlink.|(% style="width:269px" %)(System will write new value to FCD)(((524 +|AT+FCD=10|Set the Frame Counter Downlink.|(System will write new value to FCD)((( 747 747 OK 748 748 749 749 ... ... @@ -753,17 +753,14 @@ 753 753 754 754 Feature: Get or Set the Frame Counter Uplink. 755 755 756 -{{info}} 757 -**AT Command:AT+FCU** 758 -{{/info}} 534 +AT Command:AT+FCU 759 759 760 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %) 761 -|=(% colspan="3" style="width: 531px;" %)AT+FCU 762 -|(% style="width:177px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:113px" %)**Response** 763 -|(% style="width:177px" %)AT+FCU=?|(% style="width:239px" %)Get the Frame Counter Uplink.|(% style="width:113px" %)0((( 536 +|=(% colspan="3" %)AT+FCU 537 +|**Command Example**|**Function**|**Response** 538 +|AT+FCU=?|Get the Frame Counter Uplink.|0((( 764 764 OK 765 765 ))) 766 -| (% style="width:177px" %)AT+FCU=10|(% style="width:239px" %)Set the Frame Counter Uplink.|(% style="width:113px" %)OK(((541 +|AT+FCU=10|Set the Frame Counter Uplink.|OK((( 767 767 768 768 ))) 769 769 ... ... @@ -771,17 +771,14 @@ 771 771 772 772 Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 1 in ms. 773 773 774 -{{info}} 775 -**AT Command:AT+JN1DL** 776 -{{/info}} 549 +AT Command:AT+JN1DL 777 777 778 -(% border="1" style="background-color:#ffffcc; color:green; width:537.222px" %) 779 -|=(% colspan="3" style="width: 534px;" %)AT+JN1DL 780 -|(% style="width:164px" %)**Command Example**|(% style="width:229px" %)**Function**|(% style="width:140px" %)**Response** 781 -|(% style="width:164px" %)AT+JN1DL=?|(% style="width:229px" %)Get the Join Accept Delay.|(% style="width:140px" %)5000((( 551 +|=(% colspan="3" %)AT+JN1DL 552 +|**Command Example**|**Function**|**Response** 553 +|AT+JN1DL=?|Get the Join Accept Delay.|5000((( 782 782 OK 783 783 ))) 784 -| (% style="width:164px" %)AT+JN1DL=10000|(% style="width:229px" %)Set the Join Accept Delay.|(% style="width:140px" %)OK(((556 +|AT+JN1DL=10000|Set the Join Accept Delay.|OK((( 785 785 786 786 ))) 787 787 ... ... @@ -789,17 +789,14 @@ 789 789 790 790 Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 2 in ms. 791 791 792 -{{info}} 793 -**AT Command:AT+JN2DL** 794 -{{/info}} 564 +AT Command:AT+JN2DL 795 795 796 -(% border="1" style="background-color:#ffffcc; color:green; width:538.222px" %) 797 -|=(% colspan="3" style="width: 535px;" %)AT+JN2DL 798 -|(% style="width:160px" %)**Command Example**|(% style="width:228px" %)**Function**|(% style="width:146px" %)**Response** 799 -|(% style="width:160px" %)AT+JN2DL=?|(% style="width:228px" %)Get the Join Accept Delay.|(% style="width:146px" %)6000((( 566 +|=(% colspan="3" %)AT+JN2DL 567 +|**Command Example**|**Function**|**Response** 568 +|AT+JN2DL=?|Get the Join Accept Delay.|6000((( 800 800 OK 801 801 ))) 802 -| (% style="width:160px" %)AT+JN2DL=20000|(% style="width:228px" %)Set the Join Accept Delay.|(% style="width:146px" %)OK(((571 +|AT+JN2DL=20000|Set the Join Accept Delay.|OK((( 803 803 804 804 ))) 805 805 ... ... @@ -807,17 +807,14 @@ 807 807 808 808 Feature: Get or Set the public network mode. (0: off, 1: on) 809 809 810 -{{info}} 811 -**AT Command:AT+PNM** 812 -{{/info}} 579 +AT Command:AT+PNM 813 813 814 -(% border="1" style="background-color:#ffffcc; color:green; width:667.222px" %) 815 -|=(% colspan="3" style="width: 664px;" %)AT+PNM 816 -|(% style="width:166px" %)**Command Example**|(% style="width:225px" %)**Function**|(% style="width:272px" %)**Response** 817 -|(% style="width:166px" %)AT+PNM=?|(% style="width:225px" %)Get the public network mode.|(% style="width:272px" %)1((( 581 +|=(% colspan="3" %)AT+PNM 582 +|**Command Example**|**Function**|**Response** 583 +|AT+PNM=?|Get the public network mode.|1((( 818 818 OK 819 819 ))) 820 -| (% style="width:166px" %)AT+PNM=1|(% style="width:225px" %)Set the public network mode.|(% style="width:272px" %)(System will write new value to PNM)(((586 +|AT+PNM=1|Set the public network mode.|(System will write new value to PNM)((( 821 821 OK 822 822 823 823 ... ... @@ -827,35 +827,29 @@ 827 827 828 828 Feature: Get or Set the delay between the end of the Tx and the Rx Window 1 in ms 829 829 830 -{{info}} 831 -**AT Command:AT+RX1DL** 832 -{{/info}} 596 +AT Command:AT+RX1DL 833 833 834 -(% border="1" style="background-color:#ffffcc; color:green; width:408.222px" %) 835 -|=(% colspan="3" style="width: 405px;" %)AT+RX1DL 836 -|(% style="width:155px" %)**Command Example**|(% style="width:128px" %)**Function**|(% style="width:122px" %)**Response** 837 -|(% style="width:155px" %)AT+RX1DL=?|(% style="width:128px" %)Get the delay.|(% style="width:122px" %)1000((( 598 +|=(% colspan="3" %)AT+RX1DL 599 +|**Command Example**|**Function**|**Response** 600 +|AT+RX1DL=?|Get the delay.|1000((( 838 838 OK 839 839 ))) 840 -| (% style="width:155px" %)AT+RX1DL=1500|(% style="width:128px" %)Set the delay.|(% style="width:122px" %)OK(((603 +|AT+RX1DL=1500|Set the delay.|OK((( 841 841 842 842 ))) 843 843 844 -== 7.11 607 +== 7.11Receive Delay2 == 845 845 846 846 Feature: Get or Set the delay between the end of the Tx and the Rx Window 2 in ms 847 847 848 -{{info}} 849 -**AT Command:AT+RX2DL** 850 -{{/info}} 611 +AT Command:AT+RX2DL 851 851 852 -(% border="1" style="background-color:#ffffcc; color:green; width:481.222px" %) 853 -|=(% colspan="3" style="width: 478px;" %)AT+RX2DL 854 -|(% style="width:175px" %)**Command Example**|(% style="width:152px" %)**Function**|(% style="width:150px" %)**Response** 855 -|(% style="width:175px" %)AT+RX2DL=?|(% style="width:152px" %)Get the delay.|(% style="width:150px" %)2000((( 613 +|=(% colspan="3" %)AT+RX2DL 614 +|**Command Example**|**Function**|**Response** 615 +|AT+RX2DL=?|Get the delay.|2000((( 856 856 OK 857 857 ))) 858 -| (% style="width:175px" %)AT+RX2DL=2500|(% style="width:152px" %)Set the delay.|(% style="width:150px" %)OK(((618 +|AT+RX2DL=2500|Set the delay.|OK((( 859 859 860 860 ))) 861 861 ... ... @@ -863,17 +863,14 @@ 863 863 864 864 Feature: Get or Set the Rx2 window data rate (0-7 corresponding to DR_X) 865 865 866 -{{info}} 867 -**AT Command:AT+RX2DR** 868 -{{/info}} 626 +AT Command:AT+RX2DR 869 869 870 -(% border="1" style="background-color:#ffffcc; color:green; width:525.222px" %) 871 -|=(% colspan="3" style="width: 522px;" %)AT+RX2DR 872 -|(% style="width:160px" %)**Command Example**|(% style="width:232px" %)**Function**|(% style="width:130px" %)**Response** 873 -|(% style="width:160px" %)AT+RX2DR=?|(% style="width:232px" %)Get the Rx2 window data rate.|(% style="width:130px" %)2((( 628 +|=(% colspan="3" %)AT+RX2DR 629 +|**Command Example**|**Function**|**Response** 630 +|AT+RX2DR=?|Get the Rx2 window data rate.|2((( 874 874 OK 875 875 ))) 876 -| (% style="width:160px" %)AT+RX2DR=6|(% style="width:232px" %)Set the Rx2 window data rate.|(% style="width:130px" %)OK(((633 +|AT+RX2DR=6|Set the Rx2 window data rate.|OK((( 877 877 878 878 ))) 879 879 ... ... @@ -881,17 +881,14 @@ 881 881 882 882 Feature: Get or Set the Rx2 window frequency 883 883 884 -{{info}} 885 -**AT Command:AT+RX2FQ** 886 -{{/info}} 641 +AT Command:AT+RX2FQ 887 887 888 -(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %) 889 -|=(% colspan="3" style="width: 584px;" %)AT+RX2FQ 890 -|(% style="width:183px" %)**Command Example**|(% style="width:240px" %)**Function**|(% style="width:160px" %)**Response** 891 -|(% style="width:183px" %)AT+RX2FQ=?|(% style="width:240px" %)Get the Rx2 window frequency.|(% style="width:160px" %)434665000((( 643 +|=(% colspan="3" %)AT+RX2FQ 644 +|**Command Example**|**Function**|**Response** 645 +|AT+RX2FQ=?|Get the Rx2 window frequency.|434665000((( 892 892 OK 893 893 ))) 894 -| (% style="width:183px" %)AT+RX2FQ=434665000|(% style="width:240px" %)Set the Rx2 window frequency.|(% style="width:160px" %)OK(((648 +|AT+RX2FQ=434665000|Set the Rx2 window frequency.|OK((( 895 895 896 896 ))) 897 897 ... ... @@ -899,17 +899,14 @@ 899 899 900 900 Feature: Get or Set the Transmit Power(0-5, MAX:0, MIN:5, according to LoRaWAN Spec, or 40=10dB, 41 = 11dB, …, 50 = 20dB which is out of LoRaWAN spec. ) 901 901 902 -{{info}} 903 -**AT Command:AT+TXP** 904 -{{/info}} 656 +AT Command:AT+TXP 905 905 906 -(% border="1" style="background-color:#ffffcc; color:green; width:465.222px" %) 907 -|=(% colspan="3" style="width: 462px;" %)AT+TXP 908 -|(% style="width:161px" %)**Command Example**|(% style="width:189px" %)**Function**|(% style="width:112px" %)**Response** 909 -|(% style="width:161px" %)AT+TXP=?|(% style="width:189px" %)Get the Transmit Power.|(% style="width:112px" %)0((( 658 +|=(% colspan="3" %)AT+TXP 659 +|**Command Example**|**Function**|**Response** 660 +|AT+TXP=?|Get the Transmit Power.|0((( 910 910 OK 911 911 ))) 912 -| (% style="width:161px" %)AT+TXP=1|(% style="width:189px" %)Set the Transmit Power.|(% style="width:112px" %)OK(((663 +|AT+TXP=1|Set the Transmit Power.|OK((( 913 913 914 914 ))) 915 915 ... ... @@ -917,21 +917,18 @@ 917 917 918 918 If the downlink payload=22000100, it means setting the TXP to 0. 919 919 920 -* **Example 1**: Downlink Payload:**22000102**~/~/ Set AT+TXP=2.921 -* **Example 2**: Downlink Payload:**220000FF**~/~/ Set AT+TXP=0.671 +* Example 1: Downlink Payload: 22000102 ~/~/ Set AT+TXP=2. 672 +* Example 2: Downlink Payload: 220000FF ~/~/ Set AT+TXP=0. 922 922 923 923 == 7.15 RSSI of the Last Received Packet == 924 924 925 925 Feature: Get or Set the Rx2 window frequency 926 926 927 -{{info}} 928 -**AT Command:AT+RSSI** 929 -{{/info}} 678 +AT Command:AT+RSSI 930 930 931 -(% border="1" style="background-color:#ffffcc; color:green; width:557.222px" %) 932 -|=(% colspan="3" style="width: 554px;" %)AT+RSSI 933 -|(% style="width:164px" %)**Command Example**|(% style="width:289px" %)**Function**|(% style="width:100px" %)**Response** 934 -|(% style="width:164px" %)AT+RSSI=?|(% style="width:289px" %)Get the RSSI of the last received packet.|(% style="width:100px" %)0((( 680 +|=(% colspan="3" %)AT+RSSI 681 +|**Command Example**|**Function**|**Response** 682 +|AT+RSSI=?|Get the RSSI of the last received packet.|0((( 935 935 OK 936 936 ))) 937 937 ... ... @@ -939,14 +939,11 @@ 939 939 940 940 Feature: Get the SNR of the last received packet 941 941 942 -{{info}} 943 -**AT Command:AT+SNR** 944 -{{/info}} 690 +AT Command:AT+SNR 945 945 946 -(% border="1" style="background-color:#ffffcc; color:green; width:571.222px" %) 947 -|=(% colspan="3" style="width: 568px;" %)AT+SNR 948 -|(% style="width:164px" %)**Command Example**|(% style="width:290px" %)**Function**|(% style="width:113px" %)**Response** 949 -|(% style="width:164px" %)AT+SNR=?|(% style="width:290px" %)Get the RSSI of the last received packet.|(% style="width:113px" %)0((( 692 +|=(% colspan="3" %)AT+SNR 693 +|**Command Example**|**Function**|**Response** 694 +|AT+SNR=?|Get the RSSI of the last received packet.|0((( 950 950 OK 951 951 ))) 952 952 ... ... @@ -954,144 +954,114 @@ 954 954 955 955 Feature: Get or set the application port. 956 956 957 -{{info}} 958 -**AT Command: AT+PORT** 959 -{{/info}} 702 +AT Command: AT+PORT 960 960 961 -(% border="1" style="background-color:#ffffcc; color:green; width:500.222px" %) 962 -|=(% colspan="3" style="width: 497px;" %)AT+PORT 963 -|(% style="width:157px" %)**Command Example**|(% style="width:204px" %)**Function**|(% style="width:135px" %)**Response** 964 -|(% style="width:157px" %)AT+PORT=?|(% style="width:204px" %)Get the application port|(% style="width:135px" %)21((( 704 +|=(% colspan="3" %)AT+PORT 705 +|**Command Example**|**Function**|**Response** 706 +|AT+PORT=?|Get the application port|21((( 965 965 OK 966 966 ))) 967 -| (% style="width:157px" %)AT+PORT=21|(% style="width:204px" %)Set the application port|(% style="width:135px" %)OK709 +|AT+PORT=21|Set the application port|OK 968 968 969 -{{info}} 970 -**Downlink Command: 0x23** 971 -{{/info}} 711 +Downlink Command: 0x23 972 972 973 973 Format: Command Code (0x23) followed by 1 bytes port value. 974 974 975 975 If the downlink payload=2301, it means set the application port to 1, while type code is 23. 976 976 977 -* **Example 1**: Downlink Payload:**2301**~/~/ set the application port to 1978 -* **Example 2**: Downlink Payload:**2305**~/~/ set the application port to 5717 +* Example 1: Downlink Payload: 2301 ~/~/ set the application port to 1 718 +* Example 2: Downlink Payload: 2305 ~/~/ set the application port to 5 979 979 980 980 == 7.18 Single Channel Mode == 981 981 982 982 Feature:Get or Set Frequency (Unit: Hz) for Single Channel Mode. 983 983 984 -{{info}} 985 -**AT Command: AT+CHS** 986 -{{/info}} 724 +AT Command: AT+CHS 987 987 988 -(% border="1" style="background-color:#ffffcc; color:green; width:603.222px" %) 989 -|=(% colspan="3" style="width: 600px;" %)AT+CHS 990 -|(% style="width:182px" %)**Command Example**|(% style="width:295px" %)**Function**|(% style="width:122px" %)**Response** 991 -|(% style="width:182px" %)AT+CHS=?|(% style="width:295px" %)Get Frequency for Single Channel Mode|(% style="width:122px" %)0((( 726 +|=(% colspan="3" %)AT+CHS 727 +|**Command Example**|**Function**|**Response** 728 +|AT+CHS=?|Get Frequency for Single Channel Mode|0((( 992 992 OK 993 993 ))) 994 -| (% style="width:182px" %)AT+CHS=868100000|(% style="width:295px" %)Set Frequency for Single Channel Mode|(% style="width:122px" %)OK731 +|AT+CHS=868100000|Set Frequency for Single Channel Mode|OK 995 995 996 996 == 7.19 Eight Channel Mode == 997 997 998 998 Feature: Get or Set eight channels mode,Only for US915,AU915,CN470. 999 999 1000 -{{info}} 1001 -**AT Command: AT+CHE** 1002 -{{/info}} 737 +AT Command: AT+CHE 1003 1003 1004 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %) 1005 -|=(% colspan="3" style="width: 707px;" %)AT+CHE 1006 -|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response** 1007 -|(% style="width:160px" %)AT+CHE=?|(% style="width:198px" %)Get eight channels mode|(% style="width:349px" %)1((( 739 +|=(% colspan="3" %)AT+CHE 740 +|**Command Example**|**Function**|**Response** 741 +|AT+CHE=?|Get eight channels mode|1((( 1008 1008 902.3 902.5 902.7 902.9 903.1 903.3 903.5 903.7 1009 1009 1010 1010 OK 1011 1011 ))) 1012 -| (% style="width:160px" %)AT+CHE=1|(% style="width:198px" %)Set eight channels mode|(% style="width:349px" %)OK746 +|AT+CHE=1|Set eight channels mode|OK 1013 1013 1014 -{{info}} 1015 -**Downlink Command: 0x24** 1016 -{{/info}} 748 +Downlink Command: 0x24 1017 1017 1018 1018 Format: Command Code (0x24) followed by 1 bytes channel value. 1019 1019 1020 1020 If the downlink payload=2401, it means set channel mode to 1, while type code is 24. 1021 1021 1022 -* **Example 1**: Downlink Payload: 2401 ~/~/ set channel mode to 11023 -* **Example 2**: Downlink Payload: 2405 ~/~/ set channel mode to 5754 +* Example 1: Downlink Payload: 2401 ~/~/ set channel mode to 1 755 +* Example 2: Downlink Payload: 2405 ~/~/ set channel mode to 5 1024 1024 1025 1025 == 7.20 Get or Set RXwindows1 timeout == 1026 1026 1027 1027 Feature:Get or Set the number of symbols to detect and timeout from RXwindow1(0 to 255). 1028 1028 1029 -{{info}} 1030 -**AT Command: AT+RX1WTO** 1031 -{{/info}} 761 +AT Command: AT+RX1WTO 1032 1032 1033 -(% border="1" style="background-color:#ffffcc; color:green; width:460.222px" %) 1034 -|=(% colspan="3" style="width: 457px;" %)AT+ RX1WTO 1035 -|(% style="width:163px" %)**Command Example**|(% style="width:201px" %)**Function**|(% style="width:93px" %)**Response** 1036 -|(% style="width:163px" %)AT+RX1WTO=?|(% style="width:201px" %)Get RXwindows1 timeout|(% style="width:93px" %)14((( 763 +|=(% colspan="3" %)AT+ RX1WTO 764 +|**Command Example**|**Function**|**Response** 765 +|AT+RX1WTO=?|Get RXwindows1 timeout|14((( 1037 1037 OK 1038 1038 ))) 1039 -| (% style="width:163px" %)AT+RX1WTO=60|(% style="width:201px" %)Set RXwindows1 timeout|(% style="width:93px" %)OK768 +|AT+RX1WTO=60|Set RXwindows1 timeout|OK 1040 1040 1041 -((( 1042 -**AT+RX1TWO** is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph. 1043 -))) 770 +AT+RX1TWO is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph. 1044 1044 1045 -[[image:image -20220526162535-1.png]]772 +[[~[~[image:https://wiki.dragino.com/images/thumb/5/51/RX1WTO.JPG/600px-RX1WTO.JPG~|~|alt="RX1WTO.JPG" height="239" width="600"~]~]>>url:https://wiki.dragino.com/index.php/File:RX1WTO.JPG]] 1046 1046 1047 -((( 1048 1048 Increasing thisvalue is equal to extending the time that the receiving window is opened, butthe corresponding power consumption will also increase. Properly increasingthis value can increase the success rate of the downlink. 1049 1049 1050 - 1051 -))) 1052 - 1053 1053 == 7.21 Get or Set RXwindows2 timeout == 1054 1054 1055 1055 Feature:Get or Set the number of symbols to detect and timeout from RXwindow2(0 to 255). 1056 1056 1057 -{{info}} 1058 -**AT Command: AT+RX2WTO** 1059 -{{/info}} 780 +AT Command: AT+RX2WTO 1060 1060 1061 -(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %) 1062 -|=(% colspan="3" style="width: 494px;" %)AT+ RX2WTO 1063 -|(% style="width:190px" %)**Command Example**|(% style="width:199px" %)**Function**|(% style="width:104px" %)**Response** 1064 -|(% style="width:190px" %)AT+RX2WTO=?|(% style="width:199px" %)Get RXwindows2 timeout|(% style="width:104px" %)7((( 782 +|=(% colspan="3" %)AT+ RX2WTO 783 +|**Command Example**|**Function**|**Response** 784 +|AT+RX2WTO=?|Get RXwindows2 timeout|7((( 1065 1065 OK 1066 1066 ))) 1067 -| (% style="width:190px" %)AT+RX2WTO=20|(% style="width:199px" %)Set RXwindows2 timeout|(% style="width:104px" %)OK787 +|AT+RX2WTO=20|Set RXwindows2 timeout|OK 1068 1068 1069 1069 == 7.22 Setting up uplinkdwelltime (as923, au915) == 1070 1070 1071 1071 Feature: Get or Set uplinkdwelltime 1072 1072 1073 -{{info}} 1074 -**AT Command: AT+DWELLT** 1075 -{{/info}} 793 +AT Command: AT+DWELLT 1076 1076 1077 -(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %) 1078 -|=(% colspan="3" style="width: 494px;" %)AT+DWELLT 1079 -|(% style="width:183px" %)**Command Example**|(% style="width:179px" %)**Function**|(% style="width:131px" %)**Response** 1080 -|(% style="width:183px" %)AT+DWELLT=?|(% style="width:179px" %)Get uplinkdwelltime|(% style="width:131px" %)1((( 795 +|=(% colspan="3" %)AT+DWELLT 796 +|**Command Example**|**Function**|**Response** 797 +|AT+DWELLT=?|Get uplinkdwelltime|1((( 1081 1081 OK 1082 1082 ))) 1083 -| (% style="width:183px" %)AT+DWELLT=0|(% style="width:179px" %)Set uplinkdwelltime|(% style="width:131px" %)OK800 +|AT+DWELLT=0|Set uplinkdwelltime|OK 1084 1084 1085 -{{info}} 1086 -**Downlink Command: 0x25** 1087 -{{/info}} 802 +Downlink Command: 0x25 1088 1088 1089 1089 Format: Command Code (0x25) followed by 1 bytes state value. 1090 1090 1091 1091 If the downlink payload=2501, it means set uplinkdwelltime to 1, while type code is 25. 1092 1092 1093 -* **Example 1**: Downlink Payload:**2501**~/~/ set uplinkdwelltime to 11094 -* **Example 2**: Downlink Payload:**2500**~/~/ set uplinkdwelltime to 0808 +* Example 1: Downlink Payload: 2501 ~/~/ set uplinkdwelltime to 1 809 +* Example 2: Downlink Payload: 2500 ~/~/ set uplinkdwelltime to 0 1095 1095 1096 1096 == 7.23 Set Packet Receiving Response Level == 1097 1097 ... ... @@ -1099,11 +1099,11 @@ 1099 1099 1100 1100 RPL value: 1101 1101 1102 -* **AT+RPL=0:**Device won't immediately reply any downlink commands from platform.1103 -* **AT+RPL=1:**Device will immediately reply message to Unconfirmed Data Down. Payload is 0x00.1104 -* **AT+RPL=2:**Device will immediately reply message to Confirmed Data Down. Payload is 0x00 and requied response header for this command.1105 -* **AT+RPL=3:**Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command.1106 -* **AT+RPL=4:**Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands.817 +* AT+RPL=0: Device won't immediately reply any downlink commands from platform. 818 +* AT+RPL=1: Device will immediately reply message to Unconfirmed Data Down. Payload is 0x00. 819 +* AT+RPL=2: Device will immediately reply message to Confirmed Data Down. Payload is 0x00 and requied response header for this command. 820 +* AT+RPL=3: Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command. 821 +* AT+RPL=4: Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands. 1107 1107 1108 1108 Case Analyes: 1109 1109 ... ... @@ -1111,44 +1111,37 @@ 1111 1111 * For Class C devices used in ChirpStack, need to set AT+RPL=4 because Chirpstack require immedietely reply message to MAC Command. 1112 1112 * For Class C devices used in TTI, need to set AT+RPL=4 because TTI require immediately reply message to Confirmed Data Down & MAC Command. 1113 1113 1114 -{{info}} 1115 -**AT Command: AT+RPL** 1116 -{{/info}} 829 +AT Command: AT+RPL 1117 1117 1118 -(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %) 1119 -|=(% colspan="3" style="width: 533px;" %)AT+RPL 1120 -|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response** 1121 -|(% style="width:160px" %)AT+RPL=?|(% style="width:263px" %)Get packet receiving response level|(% style="width:109px" %)1((( 831 +|=(% colspan="3" %)AT+RPL 832 +|**Command Example**|**Function**|**Response** 833 +|AT+RPL=?|Get packet receiving response level|1((( 1122 1122 OK 1123 1123 ))) 1124 -| (% style="width:160px" %)AT+RPL=0|(% style="width:263px" %)Set packet receiving response level|(% style="width:109px" %)OK836 +|AT+RPL=0|Set packet receiving response level|OK 1125 1125 1126 -{{info}} 1127 -**Downlink Command: 0x21** 1128 -{{/info}} 838 +Downlink Command: 0x21 1129 1129 1130 1130 Format: Command Code (0x21) followed by 1 bytes level value. 1131 1131 1132 1132 If the downlink payload=2101, it means set packet receiving response level to 1, while type code is 21. 1133 1133 1134 -* **Example 1**: Downlink Payload:**2101**~/~/ set packet receiving response level to 11135 -* **Example 2**: Downlink Payload:**2102**~/~/ set packet receiving response level to 2844 +* Example 1: Downlink Payload: 2101 ~/~/ set packet receiving response level to 1 845 +* Example 2: Downlink Payload: 2102 ~/~/ set packet receiving response level to 2 1136 1136 1137 1137 = 8. AT Commands Combination = 1138 1138 1139 1139 == 8.1 Set a fix RX2DR for downlink window == 1140 1140 1141 -* **AT+ADR=0**~-~-> Disable ADR first1142 -* **AT+RX2DR=xxxx**~-~-> Set xxxx to your wanted DataRate851 +* AT+ADR=0 ~-~-> Disable ADR first 852 +* AT+RX2DR=xxxx ~-~-> Set xxxx to your wanted DataRate 1143 1143 1144 1144 == 8.2 Use Downlink Command to set a fix uplink DR == 1145 1145 1146 -{{info}} 1147 -**Downlink Command: 0x22000500** 1148 -{{/info}} 856 +Downlink Command: 0x22000500 1149 1149 1150 1150 Same as: 1151 1151 1152 -* AT+ADR=0 ||anchor="H7.1AdaptiveDataRate"]]1153 -* AT+DR=5 ||anchor="H7.4DataRate"]]1154 -* AT+TXP=0 ||anchor="H7.14TransmitPower"]]860 +* AT+ADR=0 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Adaptive_Data_Rate]] 861 +* AT+DR=5 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Data_Rate]] 862 +* AT+TXP=0 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Transmit_Power]]
- image-20220511120050-1.png
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -XWiki.Xiaoling - Size
-
... ... @@ -1,1 +1,0 @@ 1 -136.3 KB - Content
- image-20220526162535-1.png
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -XWiki.Xiaoling - Size
-
... ... @@ -1,1 +1,0 @@ 1 -149.4 KB - Content