Last modified by kai on 2024/09/06 10:00
<
From version < 38.117 >
edited by Xiaoling
on 2022/06/01 11:56
To version < 7.8 >
edited by Xiaoling
on 2022/05/11 11:17
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,9 +1,8 @@
1 - **Contents：**
1 +Contens
2 2  
3 3  {{toc/}}
4 4  
5 5  
6 -
7 7  = 1. Introduction =
8 8  
9 9  Dragino LoRaWAN End Node support two types of AT Commands and Downlink Commands:
... ... @@ -11,96 +11,34 @@
11 11  * **Common Commands:** They should be available for each sensor, such as: change uplink interval, reset device.
12 12  * **Sensor Related Commands:** Only for special sensor, such as control relay, poll RS485 device.
13 13  
14 -(((
15 15  **This page shows the common commands since Dragino LoRaWAN stack DR-LWS-005. Make sure the end node support stack higher than DR-LWS-005 before checking this page.**
16 16  
17 -)))
18 18  
19 19  = 2. How to use AT Commands or Downlink command =
20 20  
21 21  * For AT Command , See Devices User Manual for Device. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
22 22  * For LoRaWAN Downlink: The gateway transfer downlink command in HEX format. This page shows the HEX format downlink code for each command. but some servers use base64 as downlink code. Below are reference for how to use downlink command:
23 -** Use HEX format to send a downlink: [[TTN v3>>Notes for TTN]]
24 -** Use Base64 format to send a downlink: [[Chirpstack>>Notes for ChirpStack]]
25 -** See use note for more serves [[Servers Note>>doc:Main.WebHome]](IoT LoRaWAN Server)
20 +** Use HEX format to send a downlink: [[TTN v3>>url:https://wiki.dragino.com/index.php/Notes_for_TTN#Send_Downlink_message]]
21 +** Use Base64 format to send a downlink: [[Chirpstack>>url:https://wiki.dragino.com/index.php/Notes_for_ChirpStack#Downlink]].
22 +** See use note for more serves [[Servers Note>>url:https://wiki.dragino.com/index.php/Main_Page#Use_Note_for_Server]]
26 26  
27 -
28 -
29 29  = 3. Support End Node and firmware version =
30 30  
31 -(% border="1" style="background-color:#ffffcc; color:green; width:966px" %)
32 -|=(% colspan="3" style="width: 963px;" %)(((
33 -Dragino STM32 base hardware Firmware / LoRaWAN stack list
34 -)))
35 -|(% style="width:187px" %)(((
36 -**Model**
37 -)))|(% style="width:330px" %)(((
38 -**Description**
39 -)))|(% style="width:445px" %)(((
40 -**Firmware Version <~-~-> Stack Version**
41 -)))
42 -|(% style="width:187px" %)(((
43 -[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],
44 -)))|(% style="width:330px" %)(((
45 -Open Source Generic LoRaWAN Sensor Node
46 -)))|(% style="width:445px" %)(((
47 -(((
48 -LSN50 v1.6.0 <~-~-> DR-LWS-003;
49 -)))
50 -
51 -(((
52 -(((
26 +(% style="background-color:#ffffcc; color:green; width:995.222px" %)
27 +|=(% colspan="3" style="width: 992px;" %)Dragino STM32 base hardware Firmware / LoRaWAN stack list
28 +|(% style="width:187px" %)**Model**|(% style="width:349px" %)**Description**|(% style="width:453px" %)**Firmware Version <~-~-> Stack Version**
29 +|(% style="width:187px" %)[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],|(% style="width:349px" %)Open Source Generic LoRaWAN Sensor Node|(% style="width:453px" %)LSN50 v1.6.0 <~-~-> DR-LWS-003;(((
53 53  LSN50 v1.7.0 <~-~-> DR-LWS-005; ~-~-> Support since this version
54 54  )))
55 -)))
56 -)))
57 -|(% style="width:187px" %)(((
58 -[[LGT92>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/142-lgt-92.html]],
59 -)))|(% style="width:330px" %)(((
60 -LoRaWAN GPS Tracker
61 -)))|(% style="width:445px" %)(((
62 -(((
63 -LGT92 v1.6.3 <~-~-> DR-LWS-003;
64 -)))
65 -
66 -(((
67 -(((
32 +|(% style="width:187px" %)[[LGT92>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/142-lgt-92.html]],|(% style="width:349px" %)LoRaWAN GPS Tracker|(% style="width:453px" %)LGT92 v1.6.3 <~-~-> DR-LWS-003;(((
68 68  LGT92 v1.6.4 <~-~-> DR-LWS-005;~-~-> Support since this version
69 69  )))
70 -)))
71 -)))
72 -|(% style="width:187px" %)(((
73 -[[LBT1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/165-lbt1.html]],
74 -)))|(% style="width:330px" %)(((
75 -LoRaWAN BLE Indoor Tracker
76 -)))|(% style="width:445px" %)(((
77 -LBT1 v1.0 <~-~-> DR-LWS-005;
78 -)))
79 -|(% style="width:187px" %)(((
80 -[[RS485-LN>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/154-rs485-ln.html]],
81 -)))|(% style="width:330px" %)(((
82 -LoRaWAN RS485 Modbus Converter
83 -)))|(% style="width:445px" %)(((
84 -RS485-LN v1.3 <~-~-> DR-LWS-005;
85 -)))
86 -|(% style="width:187px" %)(((
87 -[[LHT65>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/151-lht65.html]],
88 -)))|(% style="width:330px" %)(((
89 -LoRaWAN Temperature & Humidity Sensor
90 -)))|(% style="width:445px" %)(((
91 -(((
92 -LHT65 v1.7 <~-~-> DR-LWS-003;
93 -)))
94 -
95 -(((
96 -(((
35 +|(% style="width:187px" %)[[LBT1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/165-lbt1.html]],|(% style="width:349px" %)LoRaWAN BLE Indoor Tracker|(% style="width:453px" %)LBT1 v1.0 <~-~-> DR-LWS-005;
36 +|(% style="width:187px" %)[[RS485-LN>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/154-rs485-ln.html]],|(% style="width:349px" %)LoRaWAN RS485 Modbus Converter|(% style="width:453px" %)RS485-LN v1.3 <~-~-> DR-LWS-005;
37 +|(% style="width:187px" %)[[LHT65>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/151-lht65.html]],|(% style="width:349px" %)LoRaWAN Temperature & Humidity Sensor|(% style="width:453px" %)LHT65 v1.7 <~-~-> DR-LWS-003;(((
97 97  LHT65 v1.8.0 <~-~-> DR-LWS-005;~-~-> Support since this version
98 98  )))
99 -)))
100 -)))
101 101  
102 -
103 -
104 104  = 4. System Management Commands =
105 105  
106 106  == 4.1 Change Uplink Interval ==
... ... @@ -112,7 +112,7 @@
112 112  **AT Command: AT+TDC**
113 113  )))
114 114  
115 -(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
52 +(% style="background-color:#ffffcc; color:green; width:727.222px" %)
116 116  |=(% colspan="3" style="width: 724px;" %)AT+TDC
117 117  |(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
118 118  |(% style="width:165px" %)AT+TDC=?|(% style="width:227px" %)Show current transmit Interval|(% style="width:329px" %)30000(((
... ... @@ -128,19 +128,13 @@
128 128  **Downlink Command: 0x01**
129 129  {{/info}}
130 130  
131 -(((
132 132  Format: Command Code (0x01) followed by 3 bytes time value.
133 -)))
134 134  
135 -(((
136 136  If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
137 -)))
138 138  
139 139  * **Example 1**: Downlink Payload:** 0100001E** ~/~/ Set Transmit Interval (TDC) = 30 seconds
140 140  * **Example 2**: Downlink Payload:** 0100003C** ~/~/ Set Transmit Interval (TDC) = 60 seconds
141 141  
142 -
143 -
144 144  == 4.2 Reboot End Node ==
145 145  
146 146  Feature: Reboot End Node to perform a new OTAA or ABP Join.
... ... @@ -149,7 +149,7 @@
149 149  **AT Command: ATZ**
150 150  {{/info}}
151 151  
152 -(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
83 +(% border="0" style="background-color:#ffffcc; color:green; width:727.222px" %)
153 153  |=(% colspan="3" %)ATZ: Trig a reset of the MCU
154 154  |**Command Example**|**Function**|**Response**
155 155  |ATZ|Reset MCU|(((
... ... @@ -170,16 +170,10 @@
170 170  **Downlink Command: 0x04**
171 171  {{/info}}
172 172  
173 -(((
174 174  Format: Command Code (0x04) followed by FF.
175 -)))
176 176  
177 -(((
178 178  If the downlink payload=**04FF**, the end node will reboot.
179 179  
180 -
181 -)))
182 -
183 183  == 4.3 Reset to factory Default ==
184 184  
185 185  Feature: Reset the parameters to Factory Default, factory default value depends on the firmware settings, the OTAA and ABP keys will reserve after this command.
... ... @@ -188,7 +188,7 @@
188 188  **AT Command: AT+FDR**
189 189  {{/info}}
190 190  
191 -(% border="1" style="background-color:#ffffcc; color:green; width:831.222px" %)
116 +(% style="background-color:#ffffcc; color:green; width:831.222px" %)
192 192  |=(% colspan="3" style="width: 828px;" %)Reset to factory default
193 193  |(% style="width:181px" %)**Command Example**|(% style="width:181px" %)**Function**|(% style="width:465px" %)**Response**
194 194  |(% style="width:181px" %)AT+FDR|(% style="width:181px" %)Reset to factory default|(% style="width:465px" %)(((
... ... @@ -209,13 +209,9 @@
209 209  **Downlink Command: 0x04**
210 210  {{/info}}
211 211  
212 -(((
213 213  Format: Command Code (0x04) followed by FE.
214 -)))
215 215  
216 -(((
217 217  If the downlink payload=**04FE**, Reset Parameters to Factory Default, Keys Reserve.
218 -)))
219 219  
220 220  
221 221  == 4.4 Show Firmware Version ==
... ... @@ -226,10 +226,10 @@
226 226  **AT Command: AT+VER**
227 227  {{/info}}
228 228  
229 -(% border="1" style="background-color:#ffffcc; color:green; width:586px" %)
230 -|=(% colspan="3" style="width: 583px;" %)AT+VER: Image Version and Frequency Band
231 -|(% style="width:170px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:113px" %)**Response**
232 -|(% style="width:170px" %)AT+VER=?|(% style="width:300px" %)Show Image version and Frequency Band|(% style="width:113px" %)(((
150 +(% style="background-color:#ffffcc; color:green" %)
151 +|=(% colspan="3" %)AT+VER: Image Version and Frequency Band
152 +|**Command Example**|**Function**|**Response**
153 +|AT+VER=?|Show Image version and Frequency Band|(((
233 233  1.3 EU868
234 234  
235 235  OK
... ... @@ -239,25 +239,17 @@
239 239  **Downlink Command: 0x26 (Valid in 006 stack)**
240 240  {{/info}}
241 241  
242 -(((
243 243  Downlink Format: 0x26
244 -)))
245 245  
246 -(((
247 247  Device will reply with firmware version info, device info. frequency band info. detail please check device user manual. Total 5 bytes Example: If device is of firmware version 1.1.0 Upload: xx ~-~- yy ~-~- zz ~-~- 110 total 5 bytes
248 -)))
249 249  
250 -(((
251 251  **xx: Software Type:**
252 -)))
253 253  
254 254  * 0x00 01: LGT92 Version
255 255  * 0x00 02: LBT1
256 256  * 0x00 03: LSE01/LDDS75/LDDS20/LSPH01/LLMS01/LSNPK01
257 257  
258 -(((
259 259  **yy: Frequency Band:**
260 -)))
261 261  
262 262  * 0x01: EU868
263 263  * 0x02: US915
... ... @@ -270,9 +270,7 @@
270 270  * 0x09: AS923-2
271 271  * 0xa0: AS923-3
272 272  
273 -(((
274 274  **zz: Subband**
275 -)))
276 276  
277 277  firmware version: v1.1.0 ~-~-> 110
278 278  
... ... @@ -285,7 +285,7 @@
285 285  **AT Command: AT+CFG**
286 286  {{/info}}
287 287  
288 -(% border="1" style="background-color:#ffffcc; color:green; width:599.222px" %)
199 +(% style="background-color:#ffffcc; color:green; width:599.222px" %)
289 289  |=(% colspan="3" style="width: 596px;" %)AT+CFG: Print all configurations
290 290  |(% style="width:160px" %)**Command Example**|(% style="width:154px" %)**Function**|(% style="width:280px" %)**Response**
291 291  |(% style="width:160px" %)AT+CFG|(% style="width:154px" %)Show all configures|(% style="width:280px" %)(((
... ... @@ -302,8 +302,6 @@
302 302  OK
303 303  )))
304 304  
305 -
306 -
307 307  = 5. Keys, IDs and EUIs management =
308 308  
309 309  == 5.1 Application EUI ==
... ... @@ -314,7 +314,7 @@
314 314  **AT Command: AT+APPEUI**
315 315  {{/info}}
316 316  
317 -(% border="1" style="background-color:#ffffcc; color:green; width:686.222px" %)
226 +(% style="background-color:#ffffcc; color:green; width:686.222px" %)
318 318  |=(% colspan="3" style="width: 683px;" %)AT+APPEUI
319 319  |(% style="width:305px" %)**Command Example**|(% style="width:186px" %)**Function**|(% style="width:191px" %)**Response**
320 320  |(% style="width:305px" %)AT+APPEUI=?|(% style="width:186px" %)Get the Application EUI|(% style="width:191px" %)00 b3 d5 00 00 00 00 00(((
... ... @@ -322,8 +322,6 @@
322 322  )))
323 323  |(% style="width:305px" %)AT+APPEUI=00 b3 d5 7e f0 00 4d 34|(% style="width:186px" %)Set the Application EUI|(% style="width:191px" %)OK
324 324  
325 -
326 -
327 327  == 5.2 Application Key ==
328 328  
329 329  Feature: Get or Set the Application Key.
... ... @@ -332,7 +332,7 @@
332 332  **AT Command: AT+APPKEY**
333 333  {{/info}}
334 334  
335 -(% border="1" style="background-color:#ffffcc; color:green; width:976.222px" %)
242 +(% style="background-color:#ffffcc; color:green; width:976.222px" %)
336 336  |=(% colspan="3" style="width: 973px;" %)AT+APPKEY
337 337  |(% style="width:441px" %)**Command Example**|(% style="width:180px" %)**Function**|(% style="width:350px" %)**Response**
338 338  |(% style="width:441px" %)AT+APPKEY=?|(% style="width:180px" %)Get the Application Key|(% style="width:350px" %)00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35(((
... ... @@ -340,8 +340,6 @@
340 340  )))
341 341  |(% style="width:441px" %)AT+APPKEY=00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35|(% style="width:180px" %)Set the Application Key|(% style="width:350px" %)OK
342 342  
343 -
344 -
345 345  == 5.3 Application Session Key ==
346 346  
347 347  Feature: Get or Set the Application Session Key.
... ... @@ -350,7 +350,7 @@
350 350  **AT Command: AT+APPSKEY**
351 351  {{/info}}
352 352  
353 -(% border="1" style="background-color:#ffffcc; color:green; width:1040.22px" %)
258 +(% style="background-color:#ffffcc; color:green; width:1040.22px" %)
354 354  |=(% colspan="3" style="width: 1037px;" %)AT+APPSKEY
355 355  |(% style="width:451px" %)**Command Example**|(% style="width:231px" %)**Function**|(% style="width:354px" %)**Response**
356 356  |(% style="width:451px" %)AT+APPSKEY=?|(% style="width:231px" %)Get the Application Session Key|(% style="width:354px" %)00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2(((
... ... @@ -360,8 +360,6 @@
360 360  OK
361 361  )))
362 362  
363 -
364 -
365 365  == 5.4 Device Address ==
366 366  
367 367  Feature: Get or Set the Device Address.
... ... @@ -370,7 +370,7 @@
370 370  **AT Command: AT+DADDR**
371 371  {{/info}}
372 372  
373 -(% border="1" style="background-color:#ffffcc; color:green; width:795.222px" %)
276 +(% style="background-color:#ffffcc; color:green; width:795.222px" %)
374 374  |=(% colspan="3" style="width: 792px;" %)AT+DADDR
375 375  |(% style="width:192px" %)**Command Example**|(% style="width:241px" %)**Function**|(% style="width:359px" %)**Response**
376 376  |(% style="width:192px" %)AT+DADDR=?|(% style="width:241px" %)Get the Application Session Key.|(% style="width:359px" %)(While Error in format, return AT_PARAM_ERROR)(((
... ... @@ -380,8 +380,6 @@
380 380  )))
381 381  |(% style="width:192px" %)AT+DADDR=A8 40 41 FF|(% style="width:241px" %)Set the Application Session Key.|(% style="width:359px" %)OK
382 382  
383 -
384 -
385 385  == 5.5 Device EUI ==
386 386  
387 387  Feature: Get or Set the Device EUI.
... ... @@ -390,7 +390,7 @@
390 390  **AT Command: AT+DEUI**
391 391  {{/info}}
392 392  
393 -(% border="1" style="background-color:#ffffcc; color:green; width:1035.22px" %)
294 +(% style="background-color:#ffffcc; color:green; width:1035.22px" %)
394 394  |=(% colspan="3" style="width: 1032px;" %)AT+DEUI
395 395  |(% style="width:250px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:634px" %)**Response**
396 396  |(% style="width:250px" %)AT+DEUI=?|(% style="width:147px" %)Get the Device EUI.|(% style="width:634px" %)00 44 34 22 33 45 55 55(((
... ... @@ -400,8 +400,6 @@
400 400  OK
401 401  )))
402 402  
403 -
404 -
405 405  == 5.6 Network ID ==
406 406  
407 407  Feature: Get or Set the Network ID.(You can enter this command change only after successful network connection)
... ... @@ -410,7 +410,7 @@
410 410  **AT Command: AT+NWKID**
411 411  {{/info}}
412 412  
413 -(% border="1" style="background-color:#ffffcc; color:green; width:448.222px" %)
312 +(% style="background-color:#ffffcc; color:green; width:448.222px" %)
414 414  |=(% colspan="3" style="width: 445px;" %)AT+NWKID
415 415  |(% style="width:191px" %)**Command Example**|(% style="width:153px" %)**Function**|(% style="width:101px" %)**Response**
416 416  |(% style="width:191px" %)AT+NWKID=?|(% style="width:153px" %)Get the Network ID.|(% style="width:101px" %)a8 40 41 ff(((
... ... @@ -418,8 +418,6 @@
418 418  )))
419 419  |(% style="width:191px" %)AT+NWKID=A8 40 41 FF|(% style="width:153px" %)Set the Network ID.|(% style="width:101px" %)OK
420 420  
421 -
422 -
423 423  == 5.7 Network Session Key ==
424 424  
425 425  Feature: Get or Set the Network Session Key
... ... @@ -428,7 +428,7 @@
428 428  **AT Command: AT+NWKSKEY**
429 429  {{/info}}
430 430  
431 -(% border="1" style="background-color:#ffffcc; color:green; width:1017.22px" %)
328 +(% style="background-color:#ffffcc; color:green; width:1017.22px" %)
432 432  |=(% colspan="3" style="width: 1014px;" %)AT+NWKSKEY
433 433  |(% style="width:455px" %)**Command Example**|(% style="width:215px" %)**Function**|(% style="width:343px" %)**Response**
434 434  |(% style="width:455px" %)AT+NWKSKEY=?|(% style="width:215px" %)Get the Network Session Key.|(% style="width:343px" %)00 4f 19 25 52 ce 97 09 d7 fa 84 71 db 51 02 92(((
... ... @@ -436,8 +436,6 @@
436 436  )))
437 437  |(% style="width:455px" %)AT+NWKSKEY=A8 40 41 FF FF 12 34 56 00 01 02 04 05 06 06 07|(% style="width:215px" %)Set the Network Session Key.|(% style="width:343px" %)OK
438 438  
439 -
440 -
441 441  = 6. Joining and sending date on LoRaWAN network =
442 442  
443 443  == 6.1 Confirm Mode ==
... ... @@ -448,7 +448,7 @@
448 448  **AT Command: AT+CFM**
449 449  {{/info}}
450 450  
451 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
346 +(% style="background-color:#ffffcc; color:green; width:710.222px" %)
452 452  |=(% colspan="3" style="width: 707px;" %)AT+CFM
453 453  |(% style="width:155px" %)**Command Example**|(% style="width:205px" %)**Function**|(% style="width:346px" %)**Response**
454 454  |(% style="width:155px" %)AT+CFM=?|(% style="width:205px" %)Get the confirmation mode|(% style="width:346px" %)0(((
... ... @@ -466,8 +466,6 @@
466 466  * Example 1: Downlink Payload: 0501 ~/~/ Set AT+CFM=1
467 467  * Example 2: Downlink Payload: 0500 ~/~/ Set AT+CFM=0
468 468  
469 -
470 -
471 471  == 6.2 Confirm Status ==
472 472  
473 473  Feature: Get confirmation status of the last AT+SEND (0-1).
... ... @@ -476,7 +476,7 @@
476 476  **AT Command: AT+CFS**
477 477  {{/info}}
478 478  
479 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
372 +(% style="background-color:#ffffcc; color:green; width:534.222px" %)
480 480  |=(% colspan="3" style="width: 531px;" %)AT+CFS
481 481  |(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:178px" %)**Response**
482 482  |(% style="width:156px" %)AT+CFS=?|(% style="width:193px" %)Get confirmation status|(% style="width:178px" %)0(((
... ... @@ -483,8 +483,6 @@
483 483  OK
484 484  )))
485 485  
486 -
487 -
488 488  == 6.3 Join LoRa® Network ==
489 489  
490 490  Feature: Join network.
... ... @@ -493,7 +493,7 @@
493 493  **AT Command: AT+JOIN**
494 494  {{/info}}
495 495  
496 -(% border="1" style="background-color:#ffffcc; color:green; width:647.222px" %)
387 +(% style="background-color:#ffffcc; color:green; width:647.222px" %)
497 497  |=(% colspan="3" style="width: 644px;" %)AT+JOIN
498 498  |(% style="width:163px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:334px" %)**Response**
499 499  |(% style="width:163px" %)AT+JOIN ?|(% style="width:147px" %)Get imformation.|(% style="width:334px" %)AT+JOIN: Join network(((
... ... @@ -502,8 +502,6 @@
502 502  While Error in format, return AT_BUSY_ERROR
503 503  )))
504 504  
505 -
506 -
507 507  == 6.4 LoRa® Network Join Mode ==
508 508  
509 509  Feature: Get or Set the Network Join Mode. (0: ABP, 1: OTAA).
... ... @@ -512,7 +512,7 @@
512 512  **AT Command: AT+NJM**
513 513  {{/info}}
514 514  
515 -(% border="1" style="background-color:#ffffcc; color:green; width:753.222px" %)
404 +(% style="background-color:#ffffcc; color:green; width:753.222px" %)
516 516  |=(% colspan="3" style="width: 750px;" %)AT+NJM
517 517  |(% style="width:162px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:361px" %)**Response**
518 518  |(% style="width:162px" %)AT+NJM=?|(% style="width:227px" %)Get the Network Join Mode|(% style="width:361px" %)1(((
... ... @@ -532,8 +532,6 @@
532 532  * **Example 1: **Downlink Payload: **2000** ~/~/ Set AT+NJM=O
533 533  * **Example 2:** Downlink Payload: **2001** ~/~/ Set AT+NJM=1
534 534  
535 -
536 -
537 537  == 6.5 LoRa® Network Join Status ==
538 538  
539 539  Feature: LoRa® Network Join Status.
... ... @@ -542,7 +542,7 @@
542 542  **AT Command: AT+NJS**
543 543  {{/info}}
544 544  
545 -(% border="1" style="background-color:#ffffcc; color:green; width:498.222px" %)
432 +(% style="background-color:#ffffcc; color:green; width:498.222px" %)
546 546  |=(% colspan="3" style="width: 495px;" %)AT+NJS
547 547  |(% style="width:169px" %)**Command Example**|(% style="width:164px" %)**Function**|(% style="width:161px" %)**Response**
548 548  |(% style="width:169px" %)AT+NJS=?|(% style="width:164px" %)Get the join status.|(% style="width:161px" %)0(((
... ... @@ -549,8 +549,6 @@
549 549  OK
550 550  )))
551 551  
552 -
553 -
554 554  == 6.6 Print Last Received Data in Raw Format ==
555 555  
556 556  Feature: Print Last Received Data in Raw Format<port:data>.
... ... @@ -559,7 +559,7 @@
559 559  **AT Command: AT+RECV**
560 560  {{/info}}
561 561  
562 -(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
447 +(% style="background-color:#ffffcc; color:green; width:587.222px" %)
563 563  |=(% colspan="3" style="width: 584px;" %)AT+RECV
564 564  |(% style="width:161px" %)**Command Example**|(% style="width:272px" %)**Function**|(% style="width:150px" %)**Response**
565 565  |(% style="width:161px" %)AT+RECV=?|(% style="width:272px" %)print last received data in raw format.|(% style="width:150px" %)0:(((
... ... @@ -574,7 +574,7 @@
574 574  **AT Command: AT+RECVB**
575 575  {{/info}}
576 576  
577 -(% border="1" style="background-color:#ffffcc; color:green; width:793.222px" %)
462 +(% style="background-color:#ffffcc; color:green; width:793.222px" %)
578 578  |=(% colspan="3" style="width: 790px;" %)AT+RECVB
579 579  |(% style="width:173px" %)**Command Example**|(% style="width:497px" %)**Function**|(% style="width:120px" %)**Response**
580 580  |(% style="width:173px" %)AT+RECVB=?|(% style="width:497px" %)print last received data in binary format (with hexadecimal values).|(% style="width:120px" %)2: 0010(((
... ... @@ -589,7 +589,7 @@
589 589  **AT Command: AT+SEND**
590 590  {{/info}}
591 591  
592 -(% border="1" style="background-color:#ffffcc; color:green; width:991.222px" %)
477 +(% style="background-color:#ffffcc; color:green; width:991.222px" %)
593 593  |=(% colspan="3" style="width: 988px;" %)AT+SEND
594 594  |(% style="width:201px" %)**Command Example**|(% style="width:340px" %)**Function**|(% style="width:446px" %)**Response**
595 595  |(% style="width:201px" %)AT+SEND=12:hello world|(% style="width:340px" %)Send text data along with the application port.|(% style="width:446px" %)OK(((
... ... @@ -608,7 +608,7 @@
608 608  **AT Command: AT+SENDB**
609 609  {{/info}}
610 610  
611 -(% border="1" style="background-color:#ffffcc; color:green; width:1120.22px" %)
496 +(% style="background-color:#ffffcc; color:green; width:1120.22px" %)
612 612  |=(% colspan="3" style="width: 1117px;" %)AT+SENDB
613 613  |(% style="width:257px" %)**Command Example**|(% style="width:406px" %)**Function**|(% style="width:453px" %)**Response**
614 614  |(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)OK
... ... @@ -628,7 +628,7 @@
628 628  **AT Command: AT+ADR**
629 629  {{/info}}
630 630  
631 -(% border="1" style="background-color:#ffffcc; color:green; width:683.222px" %)
516 +(% style="background-color:#ffffcc; color:green; width:683.222px" %)
632 632  |=(% colspan="3" style="width: 680px;" %)AT+ADR
633 633  |(% style="width:162px" %)**Command Example**|(% style="width:266px" %)**Function**|(% style="width:250px" %)**Response**
634 634  |(% style="width:162px" %)AT+ADR=?|(% style="width:266px" %)Get the Adaptive Data Rate setting.|(% style="width:250px" %)1(((
... ... @@ -657,7 +657,7 @@
657 657  **AT Command:AT+CLASS**
658 658  {{/info}}
659 659  
660 -(% border="1" style="background-color:#ffffcc; color:green; width:507.222px" %)
545 +(% style="background-color:#ffffcc; color:green; width:507.222px" %)
661 661  |=(% colspan="3" style="width: 504px;" %)AT+CLASS
662 662  |(% style="width:163px" %)**Command Example**|(% style="width:166px" %)**Function**|(% style="width:175px" %)**Response**
663 663  |(% style="width:163px" %)AT+CLASS=?|(% style="width:166px" %)Get the Device Class.|(% style="width:175px" %)A(((
... ... @@ -675,7 +675,7 @@
675 675  **AT Command:AT+DCS**
676 676  {{/info}}
677 677  
678 -(% border="1" style="background-color:#ffffcc; color:green; width:515.222px" %)
563 +(% style="background-color:#ffffcc; color:green; width:515.222px" %)
679 679  |=(% colspan="3" style="width: 512px;" %)AT+DCS
680 680  |(% style="width:165px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:107px" %)**Response**
681 681  |(% style="width:165px" %)AT+DCS=?|(% style="width:239px" %)Get the ETSI Duty Cycle setting.|(% style="width:107px" %)1(((
... ... @@ -693,7 +693,7 @@
693 693  **AT Command: AT+DR**
694 694  {{/info}}
695 695  
696 -(% border="1" style="background-color:#ffffcc; color:green; width:466.222px" %)
581 +(% style="background-color:#ffffcc; color:green; width:466.222px" %)
697 697  |=(% colspan="3" style="width: 463px;" %)AT+DR
698 698  |(% style="width:156px" %)**Command Example**|(% style="width:167px" %)**Function**|(% style="width:140px" %)**Response**
699 699  |(% style="width:156px" %)AT+DR=?|(% style="width:167px" %)Get the Data Rate.|(% style="width:140px" %)5(((
... ... @@ -721,7 +721,7 @@
721 721  **AT Command:AT+FCD**
722 722  {{/info}}
723 723  
724 -(% border="1" style="background-color:#ffffcc; color:green; width:693.222px" %)
609 +(% style="background-color:#ffffcc; color:green; width:693.222px" %)
725 725  |=(% colspan="3" style="width: 690px;" %)AT+FCD
726 726  |(% style="width:162px" %)**Command Example**|(% style="width:258px" %)**Function**|(% style="width:269px" %)**Response**
727 727  |(% style="width:162px" %)AT+FCD=?|(% style="width:258px" %)Get the Frame Counter Downlink.|(% style="width:269px" %)0(((
... ... @@ -741,7 +741,7 @@
741 741  **AT Command:AT+FCU**
742 742  {{/info}}
743 743  
744 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
629 +(% style="background-color:#ffffcc; color:green; width:534.222px" %)
745 745  |=(% colspan="3" style="width: 531px;" %)AT+FCU
746 746  |(% style="width:177px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:113px" %)**Response**
747 747  |(% style="width:177px" %)AT+FCU=?|(% style="width:239px" %)Get the Frame Counter Uplink.|(% style="width:113px" %)0(((
... ... @@ -759,7 +759,7 @@
759 759  **AT Command:AT+JN1DL**
760 760  {{/info}}
761 761  
762 -(% border="1" style="background-color:#ffffcc; color:green; width:537.222px" %)
647 +(% style="background-color:#ffffcc; color:green; width:537.222px" %)
763 763  |=(% colspan="3" style="width: 534px;" %)AT+JN1DL
764 764  |(% style="width:164px" %)**Command Example**|(% style="width:229px" %)**Function**|(% style="width:140px" %)**Response**
765 765  |(% style="width:164px" %)AT+JN1DL=?|(% style="width:229px" %)Get the Join Accept Delay.|(% style="width:140px" %)5000(((
... ... @@ -777,7 +777,7 @@
777 777  **AT Command:AT+JN2DL**
778 778  {{/info}}
779 779  
780 -(% border="1" style="background-color:#ffffcc; color:green; width:538.222px" %)
665 +(% style="background-color:#ffffcc; color:green; width:538.222px" %)
781 781  |=(% colspan="3" style="width: 535px;" %)AT+JN2DL
782 782  |(% style="width:160px" %)**Command Example**|(% style="width:228px" %)**Function**|(% style="width:146px" %)**Response**
783 783  |(% style="width:160px" %)AT+JN2DL=?|(% style="width:228px" %)Get the Join Accept Delay.|(% style="width:146px" %)6000(((
... ... @@ -795,7 +795,7 @@
795 795  **AT Command:AT+PNM**
796 796  {{/info}}
797 797  
798 -(% border="1" style="background-color:#ffffcc; color:green; width:667.222px" %)
683 +(% style="background-color:#ffffcc; color:green; width:667.222px" %)
799 799  |=(% colspan="3" style="width: 664px;" %)AT+PNM
800 800  |(% style="width:166px" %)**Command Example**|(% style="width:225px" %)**Function**|(% style="width:272px" %)**Response**
801 801  |(% style="width:166px" %)AT+PNM=?|(% style="width:225px" %)Get the public network mode.|(% style="width:272px" %)1(((
... ... @@ -815,7 +815,7 @@
815 815  **AT Command:AT+RX1DL**
816 816  {{/info}}
817 817  
818 -(% border="1" style="background-color:#ffffcc; color:green; width:408.222px" %)
703 +(% style="background-color:#ffffcc; color:green; width:408.222px" %)
819 819  |=(% colspan="3" style="width: 405px;" %)AT+RX1DL
820 820  |(% style="width:155px" %)**Command Example**|(% style="width:128px" %)**Function**|(% style="width:122px" %)**Response**
821 821  |(% style="width:155px" %)AT+RX1DL=?|(% style="width:128px" %)Get the delay.|(% style="width:122px" %)1000(((
... ... @@ -825,21 +825,18 @@
825 825  
826 826  )))
827 827  
828 -== 7.11 Receive Delay2 ==
713 +== 7.11Receive Delay2 ==
829 829  
830 830  Feature: Get or Set the delay between the end of the Tx and the Rx Window 2 in ms
831 831  
832 -{{info}}
833 -**AT Command:AT+RX2DL**
834 -{{/info}}
717 +AT Command:AT+RX2DL
835 835  
836 -(% border="1" style="background-color:#ffffcc; color:green; width:481.222px" %)
837 -|=(% colspan="3" style="width: 478px;" %)AT+RX2DL
838 -|(% style="width:175px" %)**Command Example**|(% style="width:152px" %)**Function**|(% style="width:150px" %)**Response**
839 -|(% style="width:175px" %)AT+RX2DL=?|(% style="width:152px" %)Get the delay.|(% style="width:150px" %)2000(((
719 +|=(% colspan="3" %)AT+RX2DL
720 +|**Command Example**|**Function**|**Response**
721 +|AT+RX2DL=?|Get the delay.|2000(((
840 840  OK
841 841  )))
842 -|(% style="width:175px" %)AT+RX2DL=2500|(% style="width:152px" %)Set the delay.|(% style="width:150px" %)OK(((
724 +|AT+RX2DL=2500|Set the delay.|OK(((
843 843  
844 844  )))
845 845  
... ... @@ -847,17 +847,14 @@
847 847  
848 848  Feature: Get or Set the Rx2 window data rate (0-7 corresponding to DR_X)
849 849  
850 -{{info}}
851 -**AT Command:AT+RX2DR**
852 -{{/info}}
732 +AT Command:AT+RX2DR
853 853  
854 -(% border="1" style="background-color:#ffffcc; color:green; width:525.222px" %)
855 -|=(% colspan="3" style="width: 522px;" %)AT+RX2DR
856 -|(% style="width:160px" %)**Command Example**|(% style="width:232px" %)**Function**|(% style="width:130px" %)**Response**
857 -|(% style="width:160px" %)AT+RX2DR=?|(% style="width:232px" %)Get the Rx2 window data rate.|(% style="width:130px" %)2(((
734 +|=(% colspan="3" %)AT+RX2DR
735 +|**Command Example**|**Function**|**Response**
736 +|AT+RX2DR=?|Get the Rx2 window data rate.|2(((
858 858  OK
859 859  )))
860 -|(% style="width:160px" %)AT+RX2DR=6|(% style="width:232px" %)Set the Rx2 window data rate.|(% style="width:130px" %)OK(((
739 +|AT+RX2DR=6|Set the Rx2 window data rate.|OK(((
861 861  
862 862  )))
863 863  
... ... @@ -865,17 +865,14 @@
865 865  
866 866  Feature: Get or Set the Rx2 window frequency
867 867  
868 -{{info}}
869 -**AT Command:AT+RX2FQ**
870 -{{/info}}
747 +AT Command:AT+RX2FQ
871 871  
872 -(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
873 -|=(% colspan="3" style="width: 584px;" %)AT+RX2FQ
874 -|(% style="width:183px" %)**Command Example**|(% style="width:240px" %)**Function**|(% style="width:160px" %)**Response**
875 -|(% style="width:183px" %)AT+RX2FQ=?|(% style="width:240px" %)Get the Rx2 window frequency.|(% style="width:160px" %)434665000(((
749 +|=(% colspan="3" %)AT+RX2FQ
750 +|**Command Example**|**Function**|**Response**
751 +|AT+RX2FQ=?|Get the Rx2 window frequency.|434665000(((
876 876  OK
877 877  )))
878 -|(% style="width:183px" %)AT+RX2FQ=434665000|(% style="width:240px" %)Set the Rx2 window frequency.|(% style="width:160px" %)OK(((
754 +|AT+RX2FQ=434665000|Set the Rx2 window frequency.|OK(((
879 879  
880 880  )))
881 881  
... ... @@ -883,17 +883,14 @@
883 883  
884 884  Feature: Get or Set the Transmit Power(0-5, MAX:0, MIN:5, according to LoRaWAN Spec, or 40=10dB, 41 = 11dB, …, 50 = 20dB which is out of LoRaWAN spec. )
885 885  
886 -{{info}}
887 -**AT Command:AT+TXP**
888 -{{/info}}
762 +AT Command:AT+TXP
889 889  
890 -(% border="1" style="background-color:#ffffcc; color:green; width:465.222px" %)
891 -|=(% colspan="3" style="width: 462px;" %)AT+TXP
892 -|(% style="width:161px" %)**Command Example**|(% style="width:189px" %)**Function**|(% style="width:112px" %)**Response**
893 -|(% style="width:161px" %)AT+TXP=?|(% style="width:189px" %)Get the Transmit Power.|(% style="width:112px" %)0(((
764 +|=(% colspan="3" %)AT+TXP
765 +|**Command Example**|**Function**|**Response**
766 +|AT+TXP=?|Get the Transmit Power.|0(((
894 894  OK
895 895  )))
896 -|(% style="width:161px" %)AT+TXP=1|(% style="width:189px" %)Set the Transmit Power.|(% style="width:112px" %)OK(((
769 +|AT+TXP=1|Set the Transmit Power.|OK(((
897 897  
898 898  )))
899 899  
... ... @@ -901,21 +901,18 @@
901 901  
902 902  If the downlink payload=22000100, it means setting the TXP to 0.
903 903  
904 -* **Example 1**: Downlink Payload: **22000102** ~/~/ Set AT+TXP=2.
905 -* **Example 2**: Downlink Payload: **220000FF** ~/~/ Set AT+TXP=0.
777 +* Example 1: Downlink Payload: 22000102 ~/~/ Set AT+TXP=2.
778 +* Example 2: Downlink Payload: 220000FF ~/~/ Set AT+TXP=0.
906 906  
907 907  == 7.15 RSSI of the Last Received Packet ==
908 908  
909 909  Feature: Get or Set the Rx2 window frequency
910 910  
911 -{{info}}
912 -**AT Command:AT+RSSI**
913 -{{/info}}
784 +AT Command:AT+RSSI
914 914  
915 -(% border="1" style="background-color:#ffffcc; color:green; width:557.222px" %)
916 -|=(% colspan="3" style="width: 554px;" %)AT+RSSI
917 -|(% style="width:164px" %)**Command Example**|(% style="width:289px" %)**Function**|(% style="width:100px" %)**Response**
918 -|(% style="width:164px" %)AT+RSSI=?|(% style="width:289px" %)Get the RSSI of the last received packet.|(% style="width:100px" %)0(((
786 +|=(% colspan="3" %)AT+RSSI
787 +|**Command Example**|**Function**|**Response**
788 +|AT+RSSI=?|Get the RSSI of the last received packet.|0(((
919 919  OK
920 920  )))
921 921  
... ... @@ -923,14 +923,11 @@
923 923  
924 924  Feature: Get the SNR of the last received packet
925 925  
926 -{{info}}
927 -**AT Command:AT+SNR**
928 -{{/info}}
796 +AT Command:AT+SNR
929 929  
930 -(% border="1" style="background-color:#ffffcc; color:green; width:571.222px" %)
931 -|=(% colspan="3" style="width: 568px;" %)AT+SNR
932 -|(% style="width:164px" %)**Command Example**|(% style="width:290px" %)**Function**|(% style="width:113px" %)**Response**
933 -|(% style="width:164px" %)AT+SNR=?|(% style="width:290px" %)Get the RSSI of the last received packet.|(% style="width:113px" %)0(((
798 +|=(% colspan="3" %)AT+SNR
799 +|**Command Example**|**Function**|**Response**
800 +|AT+SNR=?|Get the RSSI of the last received packet.|0(((
934 934  OK
935 935  )))
936 936  
... ... @@ -938,144 +938,114 @@
938 938  
939 939  Feature: Get or set the application port.
940 940  
941 -{{info}}
942 -**AT Command: AT+PORT**
943 -{{/info}}
808 +AT Command: AT+PORT
944 944  
945 -(% border="1" style="background-color:#ffffcc; color:green; width:500.222px" %)
946 -|=(% colspan="3" style="width: 497px;" %)AT+PORT
947 -|(% style="width:157px" %)**Command Example**|(% style="width:204px" %)**Function**|(% style="width:135px" %)**Response**
948 -|(% style="width:157px" %)AT+PORT=?|(% style="width:204px" %)Get the application port|(% style="width:135px" %)21(((
810 +|=(% colspan="3" %)AT+PORT
811 +|**Command Example**|**Function**|**Response**
812 +|AT+PORT=?|Get the application port|21(((
949 949  OK
950 950  )))
951 -|(% style="width:157px" %)AT+PORT=21|(% style="width:204px" %)Set the application port|(% style="width:135px" %)OK
815 +|AT+PORT=21|Set the application port|OK
952 952  
953 -{{info}}
954 -**Downlink Command: 0x23**
955 -{{/info}}
817 +Downlink Command: 0x23
956 956  
957 957  Format: Command Code (0x23) followed by 1 bytes port value.
958 958  
959 959  If the downlink payload=2301, it means set the application port to 1, while type code is 23.
960 960  
961 -* **Example 1**: Downlink Payload: **2301** ~/~/ set the application port to 1
962 -* **Example 2**: Downlink Payload:** 2305** ~/~/ set the application port to 5
823 +* Example 1: Downlink Payload: 2301 ~/~/ set the application port to 1
824 +* Example 2: Downlink Payload: 2305 ~/~/ set the application port to 5
963 963  
964 964  == 7.18 Single Channel Mode ==
965 965  
966 966  Feature:Get or Set Frequency (Unit: Hz) for Single Channel Mode.
967 967  
968 -{{info}}
969 -**AT Command: AT+CHS**
970 -{{/info}}
830 +AT Command: AT+CHS
971 971  
972 -(% border="1" style="background-color:#ffffcc; color:green; width:603.222px" %)
973 -|=(% colspan="3" style="width: 600px;" %)AT+CHS
974 -|(% style="width:182px" %)**Command Example**|(% style="width:295px" %)**Function**|(% style="width:122px" %)**Response**
975 -|(% style="width:182px" %)AT+CHS=?|(% style="width:295px" %)Get Frequency for Single Channel Mode|(% style="width:122px" %)0(((
832 +|=(% colspan="3" %)AT+CHS
833 +|**Command Example**|**Function**|**Response**
834 +|AT+CHS=?|Get Frequency for Single Channel Mode|0(((
976 976  OK
977 977  )))
978 -|(% style="width:182px" %)AT+CHS=868100000|(% style="width:295px" %)Set Frequency for Single Channel Mode|(% style="width:122px" %)OK
837 +|AT+CHS=868100000|Set Frequency for Single Channel Mode|OK
979 979  
980 980  == 7.19 Eight Channel Mode ==
981 981  
982 982  Feature: Get or Set eight channels mode,Only for US915,AU915,CN470.
983 983  
984 -{{info}}
985 -**AT Command: AT+CHE**
986 -{{/info}}
843 +AT Command: AT+CHE
987 987  
988 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
989 -|=(% colspan="3" style="width: 707px;" %)AT+CHE
990 -|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
991 -|(% style="width:160px" %)AT+CHE=?|(% style="width:198px" %)Get eight channels mode|(% style="width:349px" %)1(((
845 +|=(% colspan="3" %)AT+CHE
846 +|**Command Example**|**Function**|**Response**
847 +|AT+CHE=?|Get eight channels mode|1(((
992 992  902.3 902.5 902.7 902.9 903.1 903.3 903.5 903.7
993 993  
994 994  OK
995 995  )))
996 -|(% style="width:160px" %)AT+CHE=1|(% style="width:198px" %)Set eight channels mode|(% style="width:349px" %)OK
852 +|AT+CHE=1|Set eight channels mode|OK
997 997  
998 -{{info}}
999 -**Downlink Command: 0x24**
1000 -{{/info}}
854 +Downlink Command: 0x24
1001 1001  
1002 1002  Format: Command Code (0x24) followed by 1 bytes channel value.
1003 1003  
1004 1004  If the downlink payload=2401, it means set channel mode to 1, while type code is 24.
1005 1005  
1006 -* **Example 1**: Downlink Payload: 2401 ~/~/ set channel mode to 1
1007 -* **Example 2**: Downlink Payload: 2405 ~/~/ set channel mode to 5
860 +* Example 1: Downlink Payload: 2401 ~/~/ set channel mode to 1
861 +* Example 2: Downlink Payload: 2405 ~/~/ set channel mode to 5
1008 1008  
1009 1009  == 7.20 Get or Set RXwindows1 timeout ==
1010 1010  
1011 1011  Feature:Get or Set the number of symbols to detect and timeout from RXwindow1(0 to 255).
1012 1012  
1013 -{{info}}
1014 -**AT Command: AT+RX1WTO**
1015 -{{/info}}
867 +AT Command: AT+RX1WTO
1016 1016  
1017 -(% border="1" style="background-color:#ffffcc; color:green; width:460.222px" %)
1018 -|=(% colspan="3" style="width: 457px;" %)AT+ RX1WTO
1019 -|(% style="width:163px" %)**Command Example**|(% style="width:201px" %)**Function**|(% style="width:93px" %)**Response**
1020 -|(% style="width:163px" %)AT+RX1WTO=?|(% style="width:201px" %)Get RXwindows1 timeout|(% style="width:93px" %)14(((
869 +|=(% colspan="3" %)AT+ RX1WTO
870 +|**Command Example**|**Function**|**Response**
871 +|AT+RX1WTO=?|Get RXwindows1 timeout|14(((
1021 1021  OK
1022 1022  )))
1023 -|(% style="width:163px" %)AT+RX1WTO=60|(% style="width:201px" %)Set RXwindows1 timeout|(% style="width:93px" %)OK
874 +|AT+RX1WTO=60|Set RXwindows1 timeout|OK
1024 1024  
1025 -(((
1026 -**AT+RX1TWO** is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
1027 -)))
876 +AT+RX1TWO is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
1028 1028  
1029 -[[image:image-20220526162535-1.png]]
878 +[[~[~[image:https://wiki.dragino.com/images/thumb/5/51/RX1WTO.JPG/600px-RX1WTO.JPG~|~|alt="RX1WTO.JPG" height="239" width="600"~]~]>>url:https://wiki.dragino.com/index.php/File:RX1WTO.JPG]]
1030 1030  
1031 -(((
1032 1032  Increasing thisvalue is equal to extending the time that the receiving window is opened, butthe corresponding power consumption will also increase. Properly increasingthis value can increase the success rate of the downlink.
1033 1033  
1034 -
1035 -)))
1036 -
1037 1037  == 7.21 Get or Set RXwindows2 timeout ==
1038 1038  
1039 1039  Feature:Get or Set the number of symbols to detect and timeout from RXwindow2(0 to 255).
1040 1040  
1041 -{{info}}
1042 -**AT Command: AT+RX2WTO**
1043 -{{/info}}
886 +AT Command: AT+RX2WTO
1044 1044  
1045 -(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
1046 -|=(% colspan="3" style="width: 494px;" %)AT+ RX2WTO
1047 -|(% style="width:190px" %)**Command Example**|(% style="width:199px" %)**Function**|(% style="width:104px" %)**Response**
1048 -|(% style="width:190px" %)AT+RX2WTO=?|(% style="width:199px" %)Get RXwindows2 timeout|(% style="width:104px" %)7(((
888 +|=(% colspan="3" %)AT+ RX2WTO
889 +|**Command Example**|**Function**|**Response**
890 +|AT+RX2WTO=?|Get RXwindows2 timeout|7(((
1049 1049  OK
1050 1050  )))
1051 -|(% style="width:190px" %)AT+RX2WTO=20|(% style="width:199px" %)Set RXwindows2 timeout|(% style="width:104px" %)OK
893 +|AT+RX2WTO=20|Set RXwindows2 timeout|OK
1052 1052  
1053 1053  == 7.22 Setting up uplinkdwelltime (as923, au915) ==
1054 1054  
1055 1055  Feature: Get or Set uplinkdwelltime
1056 1056  
1057 -{{info}}
1058 -**AT Command: AT+DWELLT**
1059 -{{/info}}
899 +AT Command: AT+DWELLT
1060 1060  
1061 -(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
1062 -|=(% colspan="3" style="width: 494px;" %)AT+DWELLT
1063 -|(% style="width:183px" %)**Command Example**|(% style="width:179px" %)**Function**|(% style="width:131px" %)**Response**
1064 -|(% style="width:183px" %)AT+DWELLT=?|(% style="width:179px" %)Get uplinkdwelltime|(% style="width:131px" %)1(((
901 +|=(% colspan="3" %)AT+DWELLT
902 +|**Command Example**|**Function**|**Response**
903 +|AT+DWELLT=?|Get uplinkdwelltime|1(((
1065 1065  OK
1066 1066  )))
1067 -|(% style="width:183px" %)AT+DWELLT=0|(% style="width:179px" %)Set uplinkdwelltime|(% style="width:131px" %)OK
906 +|AT+DWELLT=0|Set uplinkdwelltime|OK
1068 1068  
1069 -{{info}}
1070 -**Downlink Command: 0x25**
1071 -{{/info}}
908 +Downlink Command: 0x25
1072 1072  
1073 1073  Format: Command Code (0x25) followed by 1 bytes state value.
1074 1074  
1075 1075  If the downlink payload=2501, it means set uplinkdwelltime to 1, while type code is 25.
1076 1076  
1077 -* **Example 1**: Downlink Payload: **2501** ~/~/ set uplinkdwelltime to 1
1078 -* **Example 2**: Downlink Payload: **2500** ~/~/ set uplinkdwelltime to 0
914 +* Example 1: Downlink Payload: 2501 ~/~/ set uplinkdwelltime to 1
915 +* Example 2: Downlink Payload: 2500 ~/~/ set uplinkdwelltime to 0
1079 1079  
1080 1080  == 7.23 Set Packet Receiving Response Level ==
1081 1081  
... ... @@ -1083,11 +1083,11 @@
1083 1083  
1084 1084  RPL value:
1085 1085  
1086 -* **AT+RPL=0:** Device won't immediately reply any downlink commands from platform.
1087 -* **AT+RPL=1:** Device will immediately reply message to Unconfirmed Data Down. Payload is 0x00.
1088 -* **AT+RPL=2:** Device will immediately reply message to Confirmed Data Down. Payload is 0x00 and requied response header for this command.
1089 -* **AT+RPL=3:** Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command.
1090 -* **AT+RPL=4: **Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands.
923 +* AT+RPL=0: Device won't immediately reply any downlink commands from platform.
924 +* AT+RPL=1: Device will immediately reply message to Unconfirmed Data Down. Payload is 0x00.
925 +* AT+RPL=2: Device will immediately reply message to Confirmed Data Down. Payload is 0x00 and requied response header for this command.
926 +* AT+RPL=3: Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command.
927 +* AT+RPL=4: Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands.
1091 1091  
1092 1092  Case Analyes:
1093 1093  
... ... @@ -1095,44 +1095,37 @@
1095 1095  * For Class C devices used in ChirpStack, need to set AT+RPL=4 because Chirpstack require immedietely reply message to MAC Command.
1096 1096  * For Class C devices used in TTI, need to set AT+RPL=4 because TTI require immediately reply message to Confirmed Data Down & MAC Command.
1097 1097  
1098 -{{info}}
1099 -**AT Command: AT+RPL**
1100 -{{/info}}
935 +AT Command: AT+RPL
1101 1101  
1102 -(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1103 -|=(% colspan="3" style="width: 533px;" %)AT+RPL
1104 -|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1105 -|(% style="width:160px" %)AT+RPL=?|(% style="width:263px" %)Get packet receiving response level|(% style="width:109px" %)1(((
937 +|=(% colspan="3" %)AT+RPL
938 +|**Command Example**|**Function**|**Response**
939 +|AT+RPL=?|Get packet receiving response level|1(((
1106 1106  OK
1107 1107  )))
1108 -|(% style="width:160px" %)AT+RPL=0|(% style="width:263px" %)Set packet receiving response level|(% style="width:109px" %)OK
942 +|AT+RPL=0|Set packet receiving response level|OK
1109 1109  
1110 -{{info}}
1111 -**Downlink Command: 0x21**
1112 -{{/info}}
944 +Downlink Command: 0x21
1113 1113  
1114 1114  Format: Command Code (0x21) followed by 1 bytes level value.
1115 1115  
1116 1116  If the downlink payload=2101, it means set packet receiving response level to 1, while type code is 21.
1117 1117  
1118 -* **Example 1**: Downlink Payload: **2101** ~/~/ set packet receiving response level to 1
1119 -* **Example 2**: Downlink Payload: **2102** ~/~/ set packet receiving response level to 2
950 +* Example 1: Downlink Payload: 2101 ~/~/ set packet receiving response level to 1
951 +* Example 2: Downlink Payload: 2102 ~/~/ set packet receiving response level to 2
1120 1120  
1121 1121  = 8. AT Commands Combination =
1122 1122  
1123 1123  == 8.1 Set a fix RX2DR for downlink window ==
1124 1124  
1125 -* **AT+ADR=0 **~-~-> Disable ADR first
1126 -* **AT+RX2DR=xxxx** ~-~-> Set xxxx to your wanted DataRate
957 +* AT+ADR=0 ~-~-> Disable ADR first
958 +* AT+RX2DR=xxxx ~-~-> Set xxxx to your wanted DataRate
1127 1127  
1128 1128  == 8.2 Use Downlink Command to set a fix uplink DR ==
1129 1129  
1130 -{{info}}
1131 -**Downlink Command: 0x22000500**
1132 -{{/info}}
962 +Downlink Command: 0x22000500
1133 1133  
1134 1134  Same as:
1135 1135  
1136 -* AT+ADR=0  [[Reference>>||anchor="H7.1AdaptiveDataRate"]]
1137 -* AT+DR=5  [[Reference>>||anchor="H7.4DataRate"]]
1138 -* AT+TXP=0  [[Reference>>||anchor="H7.14TransmitPower"]]
966 +* AT+ADR=0 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Adaptive_Data_Rate]]
967 +* AT+DR=5 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Data_Rate]]
968 +* AT+TXP=0 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Transmit_Power]]
image-20220511120050-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -136.3 KB
Content
image-20220526162535-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -149.4 KB
Content

Applications

Navigation

Copyright ©2010-2022 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0