Last modified by kai on 2024/09/06 10:00
<
From version < 38.116 >
edited by Xiaoling
on 2022/06/01 11:56
To version < 7.8 >
edited by Xiaoling
on 2022/05/11 11:17
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,9 +1,8 @@
1 - **Contents：**
1 +Contens
2 2  
3 3  {{toc/}}
4 4  
5 5  
6 -
7 7  = 1. Introduction =
8 8  
9 9  Dragino LoRaWAN End Node support two types of AT Commands and Downlink Commands:
... ... @@ -11,96 +11,34 @@
11 11  * **Common Commands:** They should be available for each sensor, such as: change uplink interval, reset device.
12 12  * **Sensor Related Commands:** Only for special sensor, such as control relay, poll RS485 device.
13 13  
14 -(((
15 15  **This page shows the common commands since Dragino LoRaWAN stack DR-LWS-005. Make sure the end node support stack higher than DR-LWS-005 before checking this page.**
16 16  
17 -)))
18 18  
19 19  = 2. How to use AT Commands or Downlink command =
20 20  
21 21  * For AT Command , See Devices User Manual for Device. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
22 22  * For LoRaWAN Downlink: The gateway transfer downlink command in HEX format. This page shows the HEX format downlink code for each command. but some servers use base64 as downlink code. Below are reference for how to use downlink command:
23 -** Use HEX format to send a downlink: [[TTN v3>>Notes for TTN]]
24 -** Use Base64 format to send a downlink: [[Chirpstack>>Notes for ChirpStack]]
25 -** See use note for more serves [[Servers Note>>doc:Main.WebHome]](IoT LoRaWAN Server)
20 +** Use HEX format to send a downlink: [[TTN v3>>url:https://wiki.dragino.com/index.php/Notes_for_TTN#Send_Downlink_message]]
21 +** Use Base64 format to send a downlink: [[Chirpstack>>url:https://wiki.dragino.com/index.php/Notes_for_ChirpStack#Downlink]].
22 +** See use note for more serves [[Servers Note>>url:https://wiki.dragino.com/index.php/Main_Page#Use_Note_for_Server]]
26 26  
27 -
28 -
29 29  = 3. Support End Node and firmware version =
30 30  
31 -(% border="1" style="background-color:#ffffcc; color:green; width:966px" %)
32 -|=(% colspan="3" style="width: 963px;" %)(((
33 -Dragino STM32 base hardware Firmware / LoRaWAN stack list
34 -)))
35 -|(% style="width:187px" %)(((
36 -**Model**
37 -)))|(% style="width:330px" %)(((
38 -**Description**
39 -)))|(% style="width:445px" %)(((
40 -**Firmware Version <~-~-> Stack Version**
41 -)))
42 -|(% style="width:187px" %)(((
43 -[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],
44 -)))|(% style="width:330px" %)(((
45 -Open Source Generic LoRaWAN Sensor Node
46 -)))|(% style="width:445px" %)(((
47 -(((
48 -LSN50 v1.6.0 <~-~-> DR-LWS-003;
49 -)))
50 -
51 -(((
52 -(((
26 +(% style="background-color:#ffffcc; color:green; width:995.222px" %)
27 +|=(% colspan="3" style="width: 992px;" %)Dragino STM32 base hardware Firmware / LoRaWAN stack list
28 +|(% style="width:187px" %)**Model**|(% style="width:349px" %)**Description**|(% style="width:453px" %)**Firmware Version <~-~-> Stack Version**
29 +|(% style="width:187px" %)[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],|(% style="width:349px" %)Open Source Generic LoRaWAN Sensor Node|(% style="width:453px" %)LSN50 v1.6.0 <~-~-> DR-LWS-003;(((
53 53  LSN50 v1.7.0 <~-~-> DR-LWS-005; ~-~-> Support since this version
54 54  )))
55 -)))
56 -)))
57 -|(% style="width:187px" %)(((
58 -[[LGT92>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/142-lgt-92.html]],
59 -)))|(% style="width:330px" %)(((
60 -LoRaWAN GPS Tracker
61 -)))|(% style="width:445px" %)(((
62 -(((
63 -LGT92 v1.6.3 <~-~-> DR-LWS-003;
64 -)))
65 -
66 -(((
67 -(((
32 +|(% style="width:187px" %)[[LGT92>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/142-lgt-92.html]],|(% style="width:349px" %)LoRaWAN GPS Tracker|(% style="width:453px" %)LGT92 v1.6.3 <~-~-> DR-LWS-003;(((
68 68  LGT92 v1.6.4 <~-~-> DR-LWS-005;~-~-> Support since this version
69 69  )))
70 -)))
71 -)))
72 -|(% style="width:187px" %)(((
73 -[[LBT1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/165-lbt1.html]],
74 -)))|(% style="width:330px" %)(((
75 -LoRaWAN BLE Indoor Tracker
76 -)))|(% style="width:445px" %)(((
77 -LBT1 v1.0 <~-~-> DR-LWS-005;
78 -)))
79 -|(% style="width:187px" %)(((
80 -[[RS485-LN>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/154-rs485-ln.html]],
81 -)))|(% style="width:330px" %)(((
82 -LoRaWAN RS485 Modbus Converter
83 -)))|(% style="width:445px" %)(((
84 -RS485-LN v1.3 <~-~-> DR-LWS-005;
85 -)))
86 -|(% style="width:187px" %)(((
87 -[[LHT65>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/151-lht65.html]],
88 -)))|(% style="width:330px" %)(((
89 -LoRaWAN Temperature & Humidity Sensor
90 -)))|(% style="width:445px" %)(((
91 -(((
92 -LHT65 v1.7 <~-~-> DR-LWS-003;
93 -)))
94 -
95 -(((
96 -(((
35 +|(% style="width:187px" %)[[LBT1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/165-lbt1.html]],|(% style="width:349px" %)LoRaWAN BLE Indoor Tracker|(% style="width:453px" %)LBT1 v1.0 <~-~-> DR-LWS-005;
36 +|(% style="width:187px" %)[[RS485-LN>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/154-rs485-ln.html]],|(% style="width:349px" %)LoRaWAN RS485 Modbus Converter|(% style="width:453px" %)RS485-LN v1.3 <~-~-> DR-LWS-005;
37 +|(% style="width:187px" %)[[LHT65>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/151-lht65.html]],|(% style="width:349px" %)LoRaWAN Temperature & Humidity Sensor|(% style="width:453px" %)LHT65 v1.7 <~-~-> DR-LWS-003;(((
97 97  LHT65 v1.8.0 <~-~-> DR-LWS-005;~-~-> Support since this version
98 98  )))
99 -)))
100 -)))
101 101  
102 -
103 -
104 104  = 4. System Management Commands =
105 105  
106 106  == 4.1 Change Uplink Interval ==
... ... @@ -112,7 +112,7 @@
112 112  **AT Command: AT+TDC**
113 113  )))
114 114  
115 -(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
52 +(% style="background-color:#ffffcc; color:green; width:727.222px" %)
116 116  |=(% colspan="3" style="width: 724px;" %)AT+TDC
117 117  |(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
118 118  |(% style="width:165px" %)AT+TDC=?|(% style="width:227px" %)Show current transmit Interval|(% style="width:329px" %)30000(((
... ... @@ -128,19 +128,13 @@
128 128  **Downlink Command: 0x01**
129 129  {{/info}}
130 130  
131 -(((
132 132  Format: Command Code (0x01) followed by 3 bytes time value.
133 -)))
134 134  
135 -(((
136 136  If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
137 -)))
138 138  
139 139  * **Example 1**: Downlink Payload:** 0100001E** ~/~/ Set Transmit Interval (TDC) = 30 seconds
140 140  * **Example 2**: Downlink Payload:** 0100003C** ~/~/ Set Transmit Interval (TDC) = 60 seconds
141 141  
142 -
143 -
144 144  == 4.2 Reboot End Node ==
145 145  
146 146  Feature: Reboot End Node to perform a new OTAA or ABP Join.
... ... @@ -149,7 +149,7 @@
149 149  **AT Command: ATZ**
150 150  {{/info}}
151 151  
152 -(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
83 +(% border="0" style="background-color:#ffffcc; color:green; width:727.222px" %)
153 153  |=(% colspan="3" %)ATZ: Trig a reset of the MCU
154 154  |**Command Example**|**Function**|**Response**
155 155  |ATZ|Reset MCU|(((
... ... @@ -170,16 +170,10 @@
170 170  **Downlink Command: 0x04**
171 171  {{/info}}
172 172  
173 -(((
174 174  Format: Command Code (0x04) followed by FF.
175 -)))
176 176  
177 -(((
178 178  If the downlink payload=**04FF**, the end node will reboot.
179 179  
180 -
181 -)))
182 -
183 183  == 4.3 Reset to factory Default ==
184 184  
185 185  Feature: Reset the parameters to Factory Default, factory default value depends on the firmware settings, the OTAA and ABP keys will reserve after this command.
... ... @@ -188,7 +188,7 @@
188 188  **AT Command: AT+FDR**
189 189  {{/info}}
190 190  
191 -(% border="1" style="background-color:#ffffcc; color:green; width:831.222px" %)
116 +(% style="background-color:#ffffcc; color:green; width:831.222px" %)
192 192  |=(% colspan="3" style="width: 828px;" %)Reset to factory default
193 193  |(% style="width:181px" %)**Command Example**|(% style="width:181px" %)**Function**|(% style="width:465px" %)**Response**
194 194  |(% style="width:181px" %)AT+FDR|(% style="width:181px" %)Reset to factory default|(% style="width:465px" %)(((
... ... @@ -209,13 +209,9 @@
209 209  **Downlink Command: 0x04**
210 210  {{/info}}
211 211  
212 -(((
213 213  Format: Command Code (0x04) followed by FE.
214 -)))
215 215  
216 -(((
217 217  If the downlink payload=**04FE**, Reset Parameters to Factory Default, Keys Reserve.
218 -)))
219 219  
220 220  
221 221  == 4.4 Show Firmware Version ==
... ... @@ -226,10 +226,10 @@
226 226  **AT Command: AT+VER**
227 227  {{/info}}
228 228  
229 -(% border="1" style="background-color:#ffffcc; color:green; width:586px" %)
230 -|=(% colspan="3" style="width: 583px;" %)AT+VER: Image Version and Frequency Band
231 -|(% style="width:170px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:113px" %)**Response**
232 -|(% style="width:170px" %)AT+VER=?|(% style="width:300px" %)Show Image version and Frequency Band|(% style="width:113px" %)(((
150 +(% style="background-color:#ffffcc; color:green" %)
151 +|=(% colspan="3" %)AT+VER: Image Version and Frequency Band
152 +|**Command Example**|**Function**|**Response**
153 +|AT+VER=?|Show Image version and Frequency Band|(((
233 233  1.3 EU868
234 234  
235 235  OK
... ... @@ -239,25 +239,17 @@
239 239  **Downlink Command: 0x26 (Valid in 006 stack)**
240 240  {{/info}}
241 241  
242 -(((
243 243  Downlink Format: 0x26
244 -)))
245 245  
246 -(((
247 247  Device will reply with firmware version info, device info. frequency band info. detail please check device user manual. Total 5 bytes Example: If device is of firmware version 1.1.0 Upload: xx ~-~- yy ~-~- zz ~-~- 110 total 5 bytes
248 -)))
249 249  
250 -(((
251 251  **xx: Software Type:**
252 -)))
253 253  
254 254  * 0x00 01: LGT92 Version
255 255  * 0x00 02: LBT1
256 256  * 0x00 03: LSE01/LDDS75/LDDS20/LSPH01/LLMS01/LSNPK01
257 257  
258 -(((
259 259  **yy: Frequency Band:**
260 -)))
261 261  
262 262  * 0x01: EU868
263 263  * 0x02: US915
... ... @@ -270,9 +270,7 @@
270 270  * 0x09: AS923-2
271 271  * 0xa0: AS923-3
272 272  
273 -(((
274 274  **zz: Subband**
275 -)))
276 276  
277 277  firmware version: v1.1.0 ~-~-> 110
278 278  
... ... @@ -285,7 +285,7 @@
285 285  **AT Command: AT+CFG**
286 286  {{/info}}
287 287  
288 -(% border="1" style="background-color:#ffffcc; color:green; width:599.222px" %)
199 +(% style="background-color:#ffffcc; color:green; width:599.222px" %)
289 289  |=(% colspan="3" style="width: 596px;" %)AT+CFG: Print all configurations
290 290  |(% style="width:160px" %)**Command Example**|(% style="width:154px" %)**Function**|(% style="width:280px" %)**Response**
291 291  |(% style="width:160px" %)AT+CFG|(% style="width:154px" %)Show all configures|(% style="width:280px" %)(((
... ... @@ -302,8 +302,6 @@
302 302  OK
303 303  )))
304 304  
305 -
306 -
307 307  = 5. Keys, IDs and EUIs management =
308 308  
309 309  == 5.1 Application EUI ==
... ... @@ -314,7 +314,7 @@
314 314  **AT Command: AT+APPEUI**
315 315  {{/info}}
316 316  
317 -(% border="1" style="background-color:#ffffcc; color:green; width:686.222px" %)
226 +(% style="background-color:#ffffcc; color:green; width:686.222px" %)
318 318  |=(% colspan="3" style="width: 683px;" %)AT+APPEUI
319 319  |(% style="width:305px" %)**Command Example**|(% style="width:186px" %)**Function**|(% style="width:191px" %)**Response**
320 320  |(% style="width:305px" %)AT+APPEUI=?|(% style="width:186px" %)Get the Application EUI|(% style="width:191px" %)00 b3 d5 00 00 00 00 00(((
... ... @@ -322,8 +322,6 @@
322 322  )))
323 323  |(% style="width:305px" %)AT+APPEUI=00 b3 d5 7e f0 00 4d 34|(% style="width:186px" %)Set the Application EUI|(% style="width:191px" %)OK
324 324  
325 -
326 -
327 327  == 5.2 Application Key ==
328 328  
329 329  Feature: Get or Set the Application Key.
... ... @@ -332,7 +332,7 @@
332 332  **AT Command: AT+APPKEY**
333 333  {{/info}}
334 334  
335 -(% border="1" style="background-color:#ffffcc; color:green; width:976.222px" %)
242 +(% style="background-color:#ffffcc; color:green; width:976.222px" %)
336 336  |=(% colspan="3" style="width: 973px;" %)AT+APPKEY
337 337  |(% style="width:441px" %)**Command Example**|(% style="width:180px" %)**Function**|(% style="width:350px" %)**Response**
338 338  |(% style="width:441px" %)AT+APPKEY=?|(% style="width:180px" %)Get the Application Key|(% style="width:350px" %)00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35(((
... ... @@ -340,8 +340,6 @@
340 340  )))
341 341  |(% style="width:441px" %)AT+APPKEY=00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35|(% style="width:180px" %)Set the Application Key|(% style="width:350px" %)OK
342 342  
343 -
344 -
345 345  == 5.3 Application Session Key ==
346 346  
347 347  Feature: Get or Set the Application Session Key.
... ... @@ -350,7 +350,7 @@
350 350  **AT Command: AT+APPSKEY**
351 351  {{/info}}
352 352  
353 -(% border="1" style="background-color:#ffffcc; color:green; width:1040.22px" %)
258 +(% style="background-color:#ffffcc; color:green; width:1040.22px" %)
354 354  |=(% colspan="3" style="width: 1037px;" %)AT+APPSKEY
355 355  |(% style="width:451px" %)**Command Example**|(% style="width:231px" %)**Function**|(% style="width:354px" %)**Response**
356 356  |(% style="width:451px" %)AT+APPSKEY=?|(% style="width:231px" %)Get the Application Session Key|(% style="width:354px" %)00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2(((
... ... @@ -360,8 +360,6 @@
360 360  OK
361 361  )))
362 362  
363 -
364 -
365 365  == 5.4 Device Address ==
366 366  
367 367  Feature: Get or Set the Device Address.
... ... @@ -370,7 +370,7 @@
370 370  **AT Command: AT+DADDR**
371 371  {{/info}}
372 372  
373 -(% border="1" style="background-color:#ffffcc; color:green; width:795.222px" %)
276 +(% style="background-color:#ffffcc; color:green; width:795.222px" %)
374 374  |=(% colspan="3" style="width: 792px;" %)AT+DADDR
375 375  |(% style="width:192px" %)**Command Example**|(% style="width:241px" %)**Function**|(% style="width:359px" %)**Response**
376 376  |(% style="width:192px" %)AT+DADDR=?|(% style="width:241px" %)Get the Application Session Key.|(% style="width:359px" %)(While Error in format, return AT_PARAM_ERROR)(((
... ... @@ -380,8 +380,6 @@
380 380  )))
381 381  |(% style="width:192px" %)AT+DADDR=A8 40 41 FF|(% style="width:241px" %)Set the Application Session Key.|(% style="width:359px" %)OK
382 382  
383 -
384 -
385 385  == 5.5 Device EUI ==
386 386  
387 387  Feature: Get or Set the Device EUI.
... ... @@ -390,7 +390,7 @@
390 390  **AT Command: AT+DEUI**
391 391  {{/info}}
392 392  
393 -(% border="1" style="background-color:#ffffcc; color:green; width:1035.22px" %)
294 +(% style="background-color:#ffffcc; color:green; width:1035.22px" %)
394 394  |=(% colspan="3" style="width: 1032px;" %)AT+DEUI
395 395  |(% style="width:250px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:634px" %)**Response**
396 396  |(% style="width:250px" %)AT+DEUI=?|(% style="width:147px" %)Get the Device EUI.|(% style="width:634px" %)00 44 34 22 33 45 55 55(((
... ... @@ -400,8 +400,6 @@
400 400  OK
401 401  )))
402 402  
403 -
404 -
405 405  == 5.6 Network ID ==
406 406  
407 407  Feature: Get or Set the Network ID.(You can enter this command change only after successful network connection)
... ... @@ -410,7 +410,7 @@
410 410  **AT Command: AT+NWKID**
411 411  {{/info}}
412 412  
413 -(% border="1" style="background-color:#ffffcc; color:green; width:448.222px" %)
312 +(% style="background-color:#ffffcc; color:green; width:448.222px" %)
414 414  |=(% colspan="3" style="width: 445px;" %)AT+NWKID
415 415  |(% style="width:191px" %)**Command Example**|(% style="width:153px" %)**Function**|(% style="width:101px" %)**Response**
416 416  |(% style="width:191px" %)AT+NWKID=?|(% style="width:153px" %)Get the Network ID.|(% style="width:101px" %)a8 40 41 ff(((
... ... @@ -418,8 +418,6 @@
418 418  )))
419 419  |(% style="width:191px" %)AT+NWKID=A8 40 41 FF|(% style="width:153px" %)Set the Network ID.|(% style="width:101px" %)OK
420 420  
421 -
422 -
423 423  == 5.7 Network Session Key ==
424 424  
425 425  Feature: Get or Set the Network Session Key
... ... @@ -428,7 +428,7 @@
428 428  **AT Command: AT+NWKSKEY**
429 429  {{/info}}
430 430  
431 -(% border="1" style="background-color:#ffffcc; color:green; width:1017.22px" %)
328 +(% style="background-color:#ffffcc; color:green; width:1017.22px" %)
432 432  |=(% colspan="3" style="width: 1014px;" %)AT+NWKSKEY
433 433  |(% style="width:455px" %)**Command Example**|(% style="width:215px" %)**Function**|(% style="width:343px" %)**Response**
434 434  |(% style="width:455px" %)AT+NWKSKEY=?|(% style="width:215px" %)Get the Network Session Key.|(% style="width:343px" %)00 4f 19 25 52 ce 97 09 d7 fa 84 71 db 51 02 92(((
... ... @@ -436,8 +436,6 @@
436 436  )))
437 437  |(% style="width:455px" %)AT+NWKSKEY=A8 40 41 FF FF 12 34 56 00 01 02 04 05 06 06 07|(% style="width:215px" %)Set the Network Session Key.|(% style="width:343px" %)OK
438 438  
439 -
440 -
441 441  = 6. Joining and sending date on LoRaWAN network =
442 442  
443 443  == 6.1 Confirm Mode ==
... ... @@ -448,7 +448,7 @@
448 448  **AT Command: AT+CFM**
449 449  {{/info}}
450 450  
451 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
346 +(% style="background-color:#ffffcc; color:green; width:710.222px" %)
452 452  |=(% colspan="3" style="width: 707px;" %)AT+CFM
453 453  |(% style="width:155px" %)**Command Example**|(% style="width:205px" %)**Function**|(% style="width:346px" %)**Response**
454 454  |(% style="width:155px" %)AT+CFM=?|(% style="width:205px" %)Get the confirmation mode|(% style="width:346px" %)0(((
... ... @@ -466,8 +466,6 @@
466 466  * Example 1: Downlink Payload: 0501 ~/~/ Set AT+CFM=1
467 467  * Example 2: Downlink Payload: 0500 ~/~/ Set AT+CFM=0
468 468  
469 -
470 -
471 471  == 6.2 Confirm Status ==
472 472  
473 473  Feature: Get confirmation status of the last AT+SEND (0-1).
... ... @@ -476,7 +476,7 @@
476 476  **AT Command: AT+CFS**
477 477  {{/info}}
478 478  
479 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
372 +(% style="background-color:#ffffcc; color:green; width:534.222px" %)
480 480  |=(% colspan="3" style="width: 531px;" %)AT+CFS
481 481  |(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:178px" %)**Response**
482 482  |(% style="width:156px" %)AT+CFS=?|(% style="width:193px" %)Get confirmation status|(% style="width:178px" %)0(((
... ... @@ -483,8 +483,6 @@
483 483  OK
484 484  )))
485 485  
486 -
487 -
488 488  == 6.3 Join LoRa® Network ==
489 489  
490 490  Feature: Join network.
... ... @@ -493,7 +493,7 @@
493 493  **AT Command: AT+JOIN**
494 494  {{/info}}
495 495  
496 -(% border="1" style="background-color:#ffffcc; color:green; width:647.222px" %)
387 +(% style="background-color:#ffffcc; color:green; width:647.222px" %)
497 497  |=(% colspan="3" style="width: 644px;" %)AT+JOIN
498 498  |(% style="width:163px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:334px" %)**Response**
499 499  |(% style="width:163px" %)AT+JOIN ?|(% style="width:147px" %)Get imformation.|(% style="width:334px" %)AT+JOIN: Join network(((
... ... @@ -502,8 +502,6 @@
502 502  While Error in format, return AT_BUSY_ERROR
503 503  )))
504 504  
505 -
506 -
507 507  == 6.4 LoRa® Network Join Mode ==
508 508  
509 509  Feature: Get or Set the Network Join Mode. (0: ABP, 1: OTAA).
... ... @@ -512,7 +512,7 @@
512 512  **AT Command: AT+NJM**
513 513  {{/info}}
514 514  
515 -(% border="1" style="background-color:#ffffcc; color:green; width:753.222px" %)
404 +(% style="background-color:#ffffcc; color:green; width:753.222px" %)
516 516  |=(% colspan="3" style="width: 750px;" %)AT+NJM
517 517  |(% style="width:162px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:361px" %)**Response**
518 518  |(% style="width:162px" %)AT+NJM=?|(% style="width:227px" %)Get the Network Join Mode|(% style="width:361px" %)1(((
... ... @@ -532,8 +532,6 @@
532 532  * **Example 1: **Downlink Payload: **2000** ~/~/ Set AT+NJM=O
533 533  * **Example 2:** Downlink Payload: **2001** ~/~/ Set AT+NJM=1
534 534  
535 -
536 -
537 537  == 6.5 LoRa® Network Join Status ==
538 538  
539 539  Feature: LoRa® Network Join Status.
... ... @@ -542,7 +542,7 @@
542 542  **AT Command: AT+NJS**
543 543  {{/info}}
544 544  
545 -(% border="1" style="background-color:#ffffcc; color:green; width:498.222px" %)
432 +(% style="background-color:#ffffcc; color:green; width:498.222px" %)
546 546  |=(% colspan="3" style="width: 495px;" %)AT+NJS
547 547  |(% style="width:169px" %)**Command Example**|(% style="width:164px" %)**Function**|(% style="width:161px" %)**Response**
548 548  |(% style="width:169px" %)AT+NJS=?|(% style="width:164px" %)Get the join status.|(% style="width:161px" %)0(((
... ... @@ -557,7 +557,7 @@
557 557  **AT Command: AT+RECV**
558 558  {{/info}}
559 559  
560 -(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
447 +(% style="background-color:#ffffcc; color:green; width:587.222px" %)
561 561  |=(% colspan="3" style="width: 584px;" %)AT+RECV
562 562  |(% style="width:161px" %)**Command Example**|(% style="width:272px" %)**Function**|(% style="width:150px" %)**Response**
563 563  |(% style="width:161px" %)AT+RECV=?|(% style="width:272px" %)print last received data in raw format.|(% style="width:150px" %)0:(((
... ... @@ -572,7 +572,7 @@
572 572  **AT Command: AT+RECVB**
573 573  {{/info}}
574 574  
575 -(% border="1" style="background-color:#ffffcc; color:green; width:793.222px" %)
462 +(% style="background-color:#ffffcc; color:green; width:793.222px" %)
576 576  |=(% colspan="3" style="width: 790px;" %)AT+RECVB
577 577  |(% style="width:173px" %)**Command Example**|(% style="width:497px" %)**Function**|(% style="width:120px" %)**Response**
578 578  |(% style="width:173px" %)AT+RECVB=?|(% style="width:497px" %)print last received data in binary format (with hexadecimal values).|(% style="width:120px" %)2: 0010(((
... ... @@ -587,7 +587,7 @@
587 587  **AT Command: AT+SEND**
588 588  {{/info}}
589 589  
590 -(% border="1" style="background-color:#ffffcc; color:green; width:991.222px" %)
477 +(% style="background-color:#ffffcc; color:green; width:991.222px" %)
591 591  |=(% colspan="3" style="width: 988px;" %)AT+SEND
592 592  |(% style="width:201px" %)**Command Example**|(% style="width:340px" %)**Function**|(% style="width:446px" %)**Response**
593 593  |(% style="width:201px" %)AT+SEND=12:hello world|(% style="width:340px" %)Send text data along with the application port.|(% style="width:446px" %)OK(((
... ... @@ -606,7 +606,7 @@
606 606  **AT Command: AT+SENDB**
607 607  {{/info}}
608 608  
609 -(% border="1" style="background-color:#ffffcc; color:green; width:1120.22px" %)
496 +(% style="background-color:#ffffcc; color:green; width:1120.22px" %)
610 610  |=(% colspan="3" style="width: 1117px;" %)AT+SENDB
611 611  |(% style="width:257px" %)**Command Example**|(% style="width:406px" %)**Function**|(% style="width:453px" %)**Response**
612 612  |(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)OK
... ... @@ -626,7 +626,7 @@
626 626  **AT Command: AT+ADR**
627 627  {{/info}}
628 628  
629 -(% border="1" style="background-color:#ffffcc; color:green; width:683.222px" %)
516 +(% style="background-color:#ffffcc; color:green; width:683.222px" %)
630 630  |=(% colspan="3" style="width: 680px;" %)AT+ADR
631 631  |(% style="width:162px" %)**Command Example**|(% style="width:266px" %)**Function**|(% style="width:250px" %)**Response**
632 632  |(% style="width:162px" %)AT+ADR=?|(% style="width:266px" %)Get the Adaptive Data Rate setting.|(% style="width:250px" %)1(((
... ... @@ -655,7 +655,7 @@
655 655  **AT Command:AT+CLASS**
656 656  {{/info}}
657 657  
658 -(% border="1" style="background-color:#ffffcc; color:green; width:507.222px" %)
545 +(% style="background-color:#ffffcc; color:green; width:507.222px" %)
659 659  |=(% colspan="3" style="width: 504px;" %)AT+CLASS
660 660  |(% style="width:163px" %)**Command Example**|(% style="width:166px" %)**Function**|(% style="width:175px" %)**Response**
661 661  |(% style="width:163px" %)AT+CLASS=?|(% style="width:166px" %)Get the Device Class.|(% style="width:175px" %)A(((
... ... @@ -673,7 +673,7 @@
673 673  **AT Command:AT+DCS**
674 674  {{/info}}
675 675  
676 -(% border="1" style="background-color:#ffffcc; color:green; width:515.222px" %)
563 +(% style="background-color:#ffffcc; color:green; width:515.222px" %)
677 677  |=(% colspan="3" style="width: 512px;" %)AT+DCS
678 678  |(% style="width:165px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:107px" %)**Response**
679 679  |(% style="width:165px" %)AT+DCS=?|(% style="width:239px" %)Get the ETSI Duty Cycle setting.|(% style="width:107px" %)1(((
... ... @@ -691,7 +691,7 @@
691 691  **AT Command: AT+DR**
692 692  {{/info}}
693 693  
694 -(% border="1" style="background-color:#ffffcc; color:green; width:466.222px" %)
581 +(% style="background-color:#ffffcc; color:green; width:466.222px" %)
695 695  |=(% colspan="3" style="width: 463px;" %)AT+DR
696 696  |(% style="width:156px" %)**Command Example**|(% style="width:167px" %)**Function**|(% style="width:140px" %)**Response**
697 697  |(% style="width:156px" %)AT+DR=?|(% style="width:167px" %)Get the Data Rate.|(% style="width:140px" %)5(((
... ... @@ -719,7 +719,7 @@
719 719  **AT Command:AT+FCD**
720 720  {{/info}}
721 721  
722 -(% border="1" style="background-color:#ffffcc; color:green; width:693.222px" %)
609 +(% style="background-color:#ffffcc; color:green; width:693.222px" %)
723 723  |=(% colspan="3" style="width: 690px;" %)AT+FCD
724 724  |(% style="width:162px" %)**Command Example**|(% style="width:258px" %)**Function**|(% style="width:269px" %)**Response**
725 725  |(% style="width:162px" %)AT+FCD=?|(% style="width:258px" %)Get the Frame Counter Downlink.|(% style="width:269px" %)0(((
... ... @@ -739,7 +739,7 @@
739 739  **AT Command:AT+FCU**
740 740  {{/info}}
741 741  
742 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
629 +(% style="background-color:#ffffcc; color:green; width:534.222px" %)
743 743  |=(% colspan="3" style="width: 531px;" %)AT+FCU
744 744  |(% style="width:177px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:113px" %)**Response**
745 745  |(% style="width:177px" %)AT+FCU=?|(% style="width:239px" %)Get the Frame Counter Uplink.|(% style="width:113px" %)0(((
... ... @@ -757,7 +757,7 @@
757 757  **AT Command:AT+JN1DL**
758 758  {{/info}}
759 759  
760 -(% border="1" style="background-color:#ffffcc; color:green; width:537.222px" %)
647 +(% style="background-color:#ffffcc; color:green; width:537.222px" %)
761 761  |=(% colspan="3" style="width: 534px;" %)AT+JN1DL
762 762  |(% style="width:164px" %)**Command Example**|(% style="width:229px" %)**Function**|(% style="width:140px" %)**Response**
763 763  |(% style="width:164px" %)AT+JN1DL=?|(% style="width:229px" %)Get the Join Accept Delay.|(% style="width:140px" %)5000(((
... ... @@ -775,7 +775,7 @@
775 775  **AT Command:AT+JN2DL**
776 776  {{/info}}
777 777  
778 -(% border="1" style="background-color:#ffffcc; color:green; width:538.222px" %)
665 +(% style="background-color:#ffffcc; color:green; width:538.222px" %)
779 779  |=(% colspan="3" style="width: 535px;" %)AT+JN2DL
780 780  |(% style="width:160px" %)**Command Example**|(% style="width:228px" %)**Function**|(% style="width:146px" %)**Response**
781 781  |(% style="width:160px" %)AT+JN2DL=?|(% style="width:228px" %)Get the Join Accept Delay.|(% style="width:146px" %)6000(((
... ... @@ -793,7 +793,7 @@
793 793  **AT Command:AT+PNM**
794 794  {{/info}}
795 795  
796 -(% border="1" style="background-color:#ffffcc; color:green; width:667.222px" %)
683 +(% style="background-color:#ffffcc; color:green; width:667.222px" %)
797 797  |=(% colspan="3" style="width: 664px;" %)AT+PNM
798 798  |(% style="width:166px" %)**Command Example**|(% style="width:225px" %)**Function**|(% style="width:272px" %)**Response**
799 799  |(% style="width:166px" %)AT+PNM=?|(% style="width:225px" %)Get the public network mode.|(% style="width:272px" %)1(((
... ... @@ -813,7 +813,7 @@
813 813  **AT Command:AT+RX1DL**
814 814  {{/info}}
815 815  
816 -(% border="1" style="background-color:#ffffcc; color:green; width:408.222px" %)
703 +(% style="background-color:#ffffcc; color:green; width:408.222px" %)
817 817  |=(% colspan="3" style="width: 405px;" %)AT+RX1DL
818 818  |(% style="width:155px" %)**Command Example**|(% style="width:128px" %)**Function**|(% style="width:122px" %)**Response**
819 819  |(% style="width:155px" %)AT+RX1DL=?|(% style="width:128px" %)Get the delay.|(% style="width:122px" %)1000(((
... ... @@ -823,21 +823,18 @@
823 823  
824 824  )))
825 825  
826 -== 7.11 Receive Delay2 ==
713 +== 7.11Receive Delay2 ==
827 827  
828 828  Feature: Get or Set the delay between the end of the Tx and the Rx Window 2 in ms
829 829  
830 -{{info}}
831 -**AT Command:AT+RX2DL**
832 -{{/info}}
717 +AT Command:AT+RX2DL
833 833  
834 -(% border="1" style="background-color:#ffffcc; color:green; width:481.222px" %)
835 -|=(% colspan="3" style="width: 478px;" %)AT+RX2DL
836 -|(% style="width:175px" %)**Command Example**|(% style="width:152px" %)**Function**|(% style="width:150px" %)**Response**
837 -|(% style="width:175px" %)AT+RX2DL=?|(% style="width:152px" %)Get the delay.|(% style="width:150px" %)2000(((
719 +|=(% colspan="3" %)AT+RX2DL
720 +|**Command Example**|**Function**|**Response**
721 +|AT+RX2DL=?|Get the delay.|2000(((
838 838  OK
839 839  )))
840 -|(% style="width:175px" %)AT+RX2DL=2500|(% style="width:152px" %)Set the delay.|(% style="width:150px" %)OK(((
724 +|AT+RX2DL=2500|Set the delay.|OK(((
841 841  
842 842  )))
843 843  
... ... @@ -845,17 +845,14 @@
845 845  
846 846  Feature: Get or Set the Rx2 window data rate (0-7 corresponding to DR_X)
847 847  
848 -{{info}}
849 -**AT Command:AT+RX2DR**
850 -{{/info}}
732 +AT Command:AT+RX2DR
851 851  
852 -(% border="1" style="background-color:#ffffcc; color:green; width:525.222px" %)
853 -|=(% colspan="3" style="width: 522px;" %)AT+RX2DR
854 -|(% style="width:160px" %)**Command Example**|(% style="width:232px" %)**Function**|(% style="width:130px" %)**Response**
855 -|(% style="width:160px" %)AT+RX2DR=?|(% style="width:232px" %)Get the Rx2 window data rate.|(% style="width:130px" %)2(((
734 +|=(% colspan="3" %)AT+RX2DR
735 +|**Command Example**|**Function**|**Response**
736 +|AT+RX2DR=?|Get the Rx2 window data rate.|2(((
856 856  OK
857 857  )))
858 -|(% style="width:160px" %)AT+RX2DR=6|(% style="width:232px" %)Set the Rx2 window data rate.|(% style="width:130px" %)OK(((
739 +|AT+RX2DR=6|Set the Rx2 window data rate.|OK(((
859 859  
860 860  )))
861 861  
... ... @@ -863,17 +863,14 @@
863 863  
864 864  Feature: Get or Set the Rx2 window frequency
865 865  
866 -{{info}}
867 -**AT Command:AT+RX2FQ**
868 -{{/info}}
747 +AT Command:AT+RX2FQ
869 869  
870 -(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
871 -|=(% colspan="3" style="width: 584px;" %)AT+RX2FQ
872 -|(% style="width:183px" %)**Command Example**|(% style="width:240px" %)**Function**|(% style="width:160px" %)**Response**
873 -|(% style="width:183px" %)AT+RX2FQ=?|(% style="width:240px" %)Get the Rx2 window frequency.|(% style="width:160px" %)434665000(((
749 +|=(% colspan="3" %)AT+RX2FQ
750 +|**Command Example**|**Function**|**Response**
751 +|AT+RX2FQ=?|Get the Rx2 window frequency.|434665000(((
874 874  OK
875 875  )))
876 -|(% style="width:183px" %)AT+RX2FQ=434665000|(% style="width:240px" %)Set the Rx2 window frequency.|(% style="width:160px" %)OK(((
754 +|AT+RX2FQ=434665000|Set the Rx2 window frequency.|OK(((
877 877  
878 878  )))
879 879  
... ... @@ -881,17 +881,14 @@
881 881  
882 882  Feature: Get or Set the Transmit Power(0-5, MAX:0, MIN:5, according to LoRaWAN Spec, or 40=10dB, 41 = 11dB, …, 50 = 20dB which is out of LoRaWAN spec. )
883 883  
884 -{{info}}
885 -**AT Command:AT+TXP**
886 -{{/info}}
762 +AT Command:AT+TXP
887 887  
888 -(% border="1" style="background-color:#ffffcc; color:green; width:465.222px" %)
889 -|=(% colspan="3" style="width: 462px;" %)AT+TXP
890 -|(% style="width:161px" %)**Command Example**|(% style="width:189px" %)**Function**|(% style="width:112px" %)**Response**
891 -|(% style="width:161px" %)AT+TXP=?|(% style="width:189px" %)Get the Transmit Power.|(% style="width:112px" %)0(((
764 +|=(% colspan="3" %)AT+TXP
765 +|**Command Example**|**Function**|**Response**
766 +|AT+TXP=?|Get the Transmit Power.|0(((
892 892  OK
893 893  )))
894 -|(% style="width:161px" %)AT+TXP=1|(% style="width:189px" %)Set the Transmit Power.|(% style="width:112px" %)OK(((
769 +|AT+TXP=1|Set the Transmit Power.|OK(((
895 895  
896 896  )))
897 897  
... ... @@ -899,21 +899,18 @@
899 899  
900 900  If the downlink payload=22000100, it means setting the TXP to 0.
901 901  
902 -* **Example 1**: Downlink Payload: **22000102** ~/~/ Set AT+TXP=2.
903 -* **Example 2**: Downlink Payload: **220000FF** ~/~/ Set AT+TXP=0.
777 +* Example 1: Downlink Payload: 22000102 ~/~/ Set AT+TXP=2.
778 +* Example 2: Downlink Payload: 220000FF ~/~/ Set AT+TXP=0.
904 904  
905 905  == 7.15 RSSI of the Last Received Packet ==
906 906  
907 907  Feature: Get or Set the Rx2 window frequency
908 908  
909 -{{info}}
910 -**AT Command:AT+RSSI**
911 -{{/info}}
784 +AT Command:AT+RSSI
912 912  
913 -(% border="1" style="background-color:#ffffcc; color:green; width:557.222px" %)
914 -|=(% colspan="3" style="width: 554px;" %)AT+RSSI
915 -|(% style="width:164px" %)**Command Example**|(% style="width:289px" %)**Function**|(% style="width:100px" %)**Response**
916 -|(% style="width:164px" %)AT+RSSI=?|(% style="width:289px" %)Get the RSSI of the last received packet.|(% style="width:100px" %)0(((
786 +|=(% colspan="3" %)AT+RSSI
787 +|**Command Example**|**Function**|**Response**
788 +|AT+RSSI=?|Get the RSSI of the last received packet.|0(((
917 917  OK
918 918  )))
919 919  
... ... @@ -921,14 +921,11 @@
921 921  
922 922  Feature: Get the SNR of the last received packet
923 923  
924 -{{info}}
925 -**AT Command:AT+SNR**
926 -{{/info}}
796 +AT Command:AT+SNR
927 927  
928 -(% border="1" style="background-color:#ffffcc; color:green; width:571.222px" %)
929 -|=(% colspan="3" style="width: 568px;" %)AT+SNR
930 -|(% style="width:164px" %)**Command Example**|(% style="width:290px" %)**Function**|(% style="width:113px" %)**Response**
931 -|(% style="width:164px" %)AT+SNR=?|(% style="width:290px" %)Get the RSSI of the last received packet.|(% style="width:113px" %)0(((
798 +|=(% colspan="3" %)AT+SNR
799 +|**Command Example**|**Function**|**Response**
800 +|AT+SNR=?|Get the RSSI of the last received packet.|0(((
932 932  OK
933 933  )))
934 934  
... ... @@ -936,144 +936,114 @@
936 936  
937 937  Feature: Get or set the application port.
938 938  
939 -{{info}}
940 -**AT Command: AT+PORT**
941 -{{/info}}
808 +AT Command: AT+PORT
942 942  
943 -(% border="1" style="background-color:#ffffcc; color:green; width:500.222px" %)
944 -|=(% colspan="3" style="width: 497px;" %)AT+PORT
945 -|(% style="width:157px" %)**Command Example**|(% style="width:204px" %)**Function**|(% style="width:135px" %)**Response**
946 -|(% style="width:157px" %)AT+PORT=?|(% style="width:204px" %)Get the application port|(% style="width:135px" %)21(((
810 +|=(% colspan="3" %)AT+PORT
811 +|**Command Example**|**Function**|**Response**
812 +|AT+PORT=?|Get the application port|21(((
947 947  OK
948 948  )))
949 -|(% style="width:157px" %)AT+PORT=21|(% style="width:204px" %)Set the application port|(% style="width:135px" %)OK
815 +|AT+PORT=21|Set the application port|OK
950 950  
951 -{{info}}
952 -**Downlink Command: 0x23**
953 -{{/info}}
817 +Downlink Command: 0x23
954 954  
955 955  Format: Command Code (0x23) followed by 1 bytes port value.
956 956  
957 957  If the downlink payload=2301, it means set the application port to 1, while type code is 23.
958 958  
959 -* **Example 1**: Downlink Payload: **2301** ~/~/ set the application port to 1
960 -* **Example 2**: Downlink Payload:** 2305** ~/~/ set the application port to 5
823 +* Example 1: Downlink Payload: 2301 ~/~/ set the application port to 1
824 +* Example 2: Downlink Payload: 2305 ~/~/ set the application port to 5
961 961  
962 962  == 7.18 Single Channel Mode ==
963 963  
964 964  Feature:Get or Set Frequency (Unit: Hz) for Single Channel Mode.
965 965  
966 -{{info}}
967 -**AT Command: AT+CHS**
968 -{{/info}}
830 +AT Command: AT+CHS
969 969  
970 -(% border="1" style="background-color:#ffffcc; color:green; width:603.222px" %)
971 -|=(% colspan="3" style="width: 600px;" %)AT+CHS
972 -|(% style="width:182px" %)**Command Example**|(% style="width:295px" %)**Function**|(% style="width:122px" %)**Response**
973 -|(% style="width:182px" %)AT+CHS=?|(% style="width:295px" %)Get Frequency for Single Channel Mode|(% style="width:122px" %)0(((
832 +|=(% colspan="3" %)AT+CHS
833 +|**Command Example**|**Function**|**Response**
834 +|AT+CHS=?|Get Frequency for Single Channel Mode|0(((
974 974  OK
975 975  )))
976 -|(% style="width:182px" %)AT+CHS=868100000|(% style="width:295px" %)Set Frequency for Single Channel Mode|(% style="width:122px" %)OK
837 +|AT+CHS=868100000|Set Frequency for Single Channel Mode|OK
977 977  
978 978  == 7.19 Eight Channel Mode ==
979 979  
980 980  Feature: Get or Set eight channels mode,Only for US915,AU915,CN470.
981 981  
982 -{{info}}
983 -**AT Command: AT+CHE**
984 -{{/info}}
843 +AT Command: AT+CHE
985 985  
986 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
987 -|=(% colspan="3" style="width: 707px;" %)AT+CHE
988 -|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
989 -|(% style="width:160px" %)AT+CHE=?|(% style="width:198px" %)Get eight channels mode|(% style="width:349px" %)1(((
845 +|=(% colspan="3" %)AT+CHE
846 +|**Command Example**|**Function**|**Response**
847 +|AT+CHE=?|Get eight channels mode|1(((
990 990  902.3 902.5 902.7 902.9 903.1 903.3 903.5 903.7
991 991  
992 992  OK
993 993  )))
994 -|(% style="width:160px" %)AT+CHE=1|(% style="width:198px" %)Set eight channels mode|(% style="width:349px" %)OK
852 +|AT+CHE=1|Set eight channels mode|OK
995 995  
996 -{{info}}
997 -**Downlink Command: 0x24**
998 -{{/info}}
854 +Downlink Command: 0x24
999 999  
1000 1000  Format: Command Code (0x24) followed by 1 bytes channel value.
1001 1001  
1002 1002  If the downlink payload=2401, it means set channel mode to 1, while type code is 24.
1003 1003  
1004 -* **Example 1**: Downlink Payload: 2401 ~/~/ set channel mode to 1
1005 -* **Example 2**: Downlink Payload: 2405 ~/~/ set channel mode to 5
860 +* Example 1: Downlink Payload: 2401 ~/~/ set channel mode to 1
861 +* Example 2: Downlink Payload: 2405 ~/~/ set channel mode to 5
1006 1006  
1007 1007  == 7.20 Get or Set RXwindows1 timeout ==
1008 1008  
1009 1009  Feature:Get or Set the number of symbols to detect and timeout from RXwindow1(0 to 255).
1010 1010  
1011 -{{info}}
1012 -**AT Command: AT+RX1WTO**
1013 -{{/info}}
867 +AT Command: AT+RX1WTO
1014 1014  
1015 -(% border="1" style="background-color:#ffffcc; color:green; width:460.222px" %)
1016 -|=(% colspan="3" style="width: 457px;" %)AT+ RX1WTO
1017 -|(% style="width:163px" %)**Command Example**|(% style="width:201px" %)**Function**|(% style="width:93px" %)**Response**
1018 -|(% style="width:163px" %)AT+RX1WTO=?|(% style="width:201px" %)Get RXwindows1 timeout|(% style="width:93px" %)14(((
869 +|=(% colspan="3" %)AT+ RX1WTO
870 +|**Command Example**|**Function**|**Response**
871 +|AT+RX1WTO=?|Get RXwindows1 timeout|14(((
1019 1019  OK
1020 1020  )))
1021 -|(% style="width:163px" %)AT+RX1WTO=60|(% style="width:201px" %)Set RXwindows1 timeout|(% style="width:93px" %)OK
874 +|AT+RX1WTO=60|Set RXwindows1 timeout|OK
1022 1022  
1023 -(((
1024 -**AT+RX1TWO** is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
1025 -)))
876 +AT+RX1TWO is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
1026 1026  
1027 -[[image:image-20220526162535-1.png]]
878 +[[~[~[image:https://wiki.dragino.com/images/thumb/5/51/RX1WTO.JPG/600px-RX1WTO.JPG~|~|alt="RX1WTO.JPG" height="239" width="600"~]~]>>url:https://wiki.dragino.com/index.php/File:RX1WTO.JPG]]
1028 1028  
1029 -(((
1030 1030  Increasing thisvalue is equal to extending the time that the receiving window is opened, butthe corresponding power consumption will also increase. Properly increasingthis value can increase the success rate of the downlink.
1031 1031  
1032 -
1033 -)))
1034 -
1035 1035  == 7.21 Get or Set RXwindows2 timeout ==
1036 1036  
1037 1037  Feature:Get or Set the number of symbols to detect and timeout from RXwindow2(0 to 255).
1038 1038  
1039 -{{info}}
1040 -**AT Command: AT+RX2WTO**
1041 -{{/info}}
886 +AT Command: AT+RX2WTO
1042 1042  
1043 -(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
1044 -|=(% colspan="3" style="width: 494px;" %)AT+ RX2WTO
1045 -|(% style="width:190px" %)**Command Example**|(% style="width:199px" %)**Function**|(% style="width:104px" %)**Response**
1046 -|(% style="width:190px" %)AT+RX2WTO=?|(% style="width:199px" %)Get RXwindows2 timeout|(% style="width:104px" %)7(((
888 +|=(% colspan="3" %)AT+ RX2WTO
889 +|**Command Example**|**Function**|**Response**
890 +|AT+RX2WTO=?|Get RXwindows2 timeout|7(((
1047 1047  OK
1048 1048  )))
1049 -|(% style="width:190px" %)AT+RX2WTO=20|(% style="width:199px" %)Set RXwindows2 timeout|(% style="width:104px" %)OK
893 +|AT+RX2WTO=20|Set RXwindows2 timeout|OK
1050 1050  
1051 1051  == 7.22 Setting up uplinkdwelltime (as923, au915) ==
1052 1052  
1053 1053  Feature: Get or Set uplinkdwelltime
1054 1054  
1055 -{{info}}
1056 -**AT Command: AT+DWELLT**
1057 -{{/info}}
899 +AT Command: AT+DWELLT
1058 1058  
1059 -(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
1060 -|=(% colspan="3" style="width: 494px;" %)AT+DWELLT
1061 -|(% style="width:183px" %)**Command Example**|(% style="width:179px" %)**Function**|(% style="width:131px" %)**Response**
1062 -|(% style="width:183px" %)AT+DWELLT=?|(% style="width:179px" %)Get uplinkdwelltime|(% style="width:131px" %)1(((
901 +|=(% colspan="3" %)AT+DWELLT
902 +|**Command Example**|**Function**|**Response**
903 +|AT+DWELLT=?|Get uplinkdwelltime|1(((
1063 1063  OK
1064 1064  )))
1065 -|(% style="width:183px" %)AT+DWELLT=0|(% style="width:179px" %)Set uplinkdwelltime|(% style="width:131px" %)OK
906 +|AT+DWELLT=0|Set uplinkdwelltime|OK
1066 1066  
1067 -{{info}}
1068 -**Downlink Command: 0x25**
1069 -{{/info}}
908 +Downlink Command: 0x25
1070 1070  
1071 1071  Format: Command Code (0x25) followed by 1 bytes state value.
1072 1072  
1073 1073  If the downlink payload=2501, it means set uplinkdwelltime to 1, while type code is 25.
1074 1074  
1075 -* **Example 1**: Downlink Payload: **2501** ~/~/ set uplinkdwelltime to 1
1076 -* **Example 2**: Downlink Payload: **2500** ~/~/ set uplinkdwelltime to 0
914 +* Example 1: Downlink Payload: 2501 ~/~/ set uplinkdwelltime to 1
915 +* Example 2: Downlink Payload: 2500 ~/~/ set uplinkdwelltime to 0
1077 1077  
1078 1078  == 7.23 Set Packet Receiving Response Level ==
1079 1079  
... ... @@ -1081,11 +1081,11 @@
1081 1081  
1082 1082  RPL value:
1083 1083  
1084 -* **AT+RPL=0:** Device won't immediately reply any downlink commands from platform.
1085 -* **AT+RPL=1:** Device will immediately reply message to Unconfirmed Data Down. Payload is 0x00.
1086 -* **AT+RPL=2:** Device will immediately reply message to Confirmed Data Down. Payload is 0x00 and requied response header for this command.
1087 -* **AT+RPL=3:** Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command.
1088 -* **AT+RPL=4: **Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands.
923 +* AT+RPL=0: Device won't immediately reply any downlink commands from platform.
924 +* AT+RPL=1: Device will immediately reply message to Unconfirmed Data Down. Payload is 0x00.
925 +* AT+RPL=2: Device will immediately reply message to Confirmed Data Down. Payload is 0x00 and requied response header for this command.
926 +* AT+RPL=3: Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command.
927 +* AT+RPL=4: Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands.
1089 1089  
1090 1090  Case Analyes:
1091 1091  
... ... @@ -1093,44 +1093,37 @@
1093 1093  * For Class C devices used in ChirpStack, need to set AT+RPL=4 because Chirpstack require immedietely reply message to MAC Command.
1094 1094  * For Class C devices used in TTI, need to set AT+RPL=4 because TTI require immediately reply message to Confirmed Data Down & MAC Command.
1095 1095  
1096 -{{info}}
1097 -**AT Command: AT+RPL**
1098 -{{/info}}
935 +AT Command: AT+RPL
1099 1099  
1100 -(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1101 -|=(% colspan="3" style="width: 533px;" %)AT+RPL
1102 -|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1103 -|(% style="width:160px" %)AT+RPL=?|(% style="width:263px" %)Get packet receiving response level|(% style="width:109px" %)1(((
937 +|=(% colspan="3" %)AT+RPL
938 +|**Command Example**|**Function**|**Response**
939 +|AT+RPL=?|Get packet receiving response level|1(((
1104 1104  OK
1105 1105  )))
1106 -|(% style="width:160px" %)AT+RPL=0|(% style="width:263px" %)Set packet receiving response level|(% style="width:109px" %)OK
942 +|AT+RPL=0|Set packet receiving response level|OK
1107 1107  
1108 -{{info}}
1109 -**Downlink Command: 0x21**
1110 -{{/info}}
944 +Downlink Command: 0x21
1111 1111  
1112 1112  Format: Command Code (0x21) followed by 1 bytes level value.
1113 1113  
1114 1114  If the downlink payload=2101, it means set packet receiving response level to 1, while type code is 21.
1115 1115  
1116 -* **Example 1**: Downlink Payload: **2101** ~/~/ set packet receiving response level to 1
1117 -* **Example 2**: Downlink Payload: **2102** ~/~/ set packet receiving response level to 2
950 +* Example 1: Downlink Payload: 2101 ~/~/ set packet receiving response level to 1
951 +* Example 2: Downlink Payload: 2102 ~/~/ set packet receiving response level to 2
1118 1118  
1119 1119  = 8. AT Commands Combination =
1120 1120  
1121 1121  == 8.1 Set a fix RX2DR for downlink window ==
1122 1122  
1123 -* **AT+ADR=0 **~-~-> Disable ADR first
1124 -* **AT+RX2DR=xxxx** ~-~-> Set xxxx to your wanted DataRate
957 +* AT+ADR=0 ~-~-> Disable ADR first
958 +* AT+RX2DR=xxxx ~-~-> Set xxxx to your wanted DataRate
1125 1125  
1126 1126  == 8.2 Use Downlink Command to set a fix uplink DR ==
1127 1127  
1128 -{{info}}
1129 -**Downlink Command: 0x22000500**
1130 -{{/info}}
962 +Downlink Command: 0x22000500
1131 1131  
1132 1132  Same as:
1133 1133  
1134 -* AT+ADR=0  [[Reference>>||anchor="H7.1AdaptiveDataRate"]]
1135 -* AT+DR=5  [[Reference>>||anchor="H7.4DataRate"]]
1136 -* AT+TXP=0  [[Reference>>||anchor="H7.14TransmitPower"]]
966 +* AT+ADR=0 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Adaptive_Data_Rate]]
967 +* AT+DR=5 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Data_Rate]]
968 +* AT+TXP=0 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Transmit_Power]]
image-20220511120050-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -136.3 KB
Content
image-20220526162535-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -149.4 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0