Last modified by kai on 2024/09/06 10:00
<
From version < 38.115 >
edited by Xiaoling
on 2022/06/01 11:56
To version < 7.8 >
edited by Xiaoling
on 2022/05/11 11:17
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,9 +1,8 @@
1 - **Contents：**
1 +Contens
2 2  
3 3  {{toc/}}
4 4  
5 5  
6 -
7 7  = 1. Introduction =
8 8  
9 9  Dragino LoRaWAN End Node support two types of AT Commands and Downlink Commands:
... ... @@ -11,96 +11,34 @@
11 11  * **Common Commands:** They should be available for each sensor, such as: change uplink interval, reset device.
12 12  * **Sensor Related Commands:** Only for special sensor, such as control relay, poll RS485 device.
13 13  
14 -(((
15 15  **This page shows the common commands since Dragino LoRaWAN stack DR-LWS-005. Make sure the end node support stack higher than DR-LWS-005 before checking this page.**
16 16  
17 -)))
18 18  
19 19  = 2. How to use AT Commands or Downlink command =
20 20  
21 21  * For AT Command , See Devices User Manual for Device. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
22 22  * For LoRaWAN Downlink: The gateway transfer downlink command in HEX format. This page shows the HEX format downlink code for each command. but some servers use base64 as downlink code. Below are reference for how to use downlink command:
23 -** Use HEX format to send a downlink: [[TTN v3>>Notes for TTN]]
24 -** Use Base64 format to send a downlink: [[Chirpstack>>Notes for ChirpStack]]
25 -** See use note for more serves [[Servers Note>>doc:Main.WebHome]](IoT LoRaWAN Server)
20 +** Use HEX format to send a downlink: [[TTN v3>>url:https://wiki.dragino.com/index.php/Notes_for_TTN#Send_Downlink_message]]
21 +** Use Base64 format to send a downlink: [[Chirpstack>>url:https://wiki.dragino.com/index.php/Notes_for_ChirpStack#Downlink]].
22 +** See use note for more serves [[Servers Note>>url:https://wiki.dragino.com/index.php/Main_Page#Use_Note_for_Server]]
26 26  
27 -
28 -
29 29  = 3. Support End Node and firmware version =
30 30  
31 -(% border="1" style="background-color:#ffffcc; color:green; width:966px" %)
32 -|=(% colspan="3" style="width: 963px;" %)(((
33 -Dragino STM32 base hardware Firmware / LoRaWAN stack list
34 -)))
35 -|(% style="width:187px" %)(((
36 -**Model**
37 -)))|(% style="width:330px" %)(((
38 -**Description**
39 -)))|(% style="width:445px" %)(((
40 -**Firmware Version <~-~-> Stack Version**
41 -)))
42 -|(% style="width:187px" %)(((
43 -[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],
44 -)))|(% style="width:330px" %)(((
45 -Open Source Generic LoRaWAN Sensor Node
46 -)))|(% style="width:445px" %)(((
47 -(((
48 -LSN50 v1.6.0 <~-~-> DR-LWS-003;
49 -)))
50 -
51 -(((
52 -(((
26 +(% style="background-color:#ffffcc; color:green; width:995.222px" %)
27 +|=(% colspan="3" style="width: 992px;" %)Dragino STM32 base hardware Firmware / LoRaWAN stack list
28 +|(% style="width:187px" %)**Model**|(% style="width:349px" %)**Description**|(% style="width:453px" %)**Firmware Version <~-~-> Stack Version**
29 +|(% style="width:187px" %)[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],|(% style="width:349px" %)Open Source Generic LoRaWAN Sensor Node|(% style="width:453px" %)LSN50 v1.6.0 <~-~-> DR-LWS-003;(((
53 53  LSN50 v1.7.0 <~-~-> DR-LWS-005; ~-~-> Support since this version
54 54  )))
55 -)))
56 -)))
57 -|(% style="width:187px" %)(((
58 -[[LGT92>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/142-lgt-92.html]],
59 -)))|(% style="width:330px" %)(((
60 -LoRaWAN GPS Tracker
61 -)))|(% style="width:445px" %)(((
62 -(((
63 -LGT92 v1.6.3 <~-~-> DR-LWS-003;
64 -)))
65 -
66 -(((
67 -(((
32 +|(% style="width:187px" %)[[LGT92>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/142-lgt-92.html]],|(% style="width:349px" %)LoRaWAN GPS Tracker|(% style="width:453px" %)LGT92 v1.6.3 <~-~-> DR-LWS-003;(((
68 68  LGT92 v1.6.4 <~-~-> DR-LWS-005;~-~-> Support since this version
69 69  )))
70 -)))
71 -)))
72 -|(% style="width:187px" %)(((
73 -[[LBT1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/165-lbt1.html]],
74 -)))|(% style="width:330px" %)(((
75 -LoRaWAN BLE Indoor Tracker
76 -)))|(% style="width:445px" %)(((
77 -LBT1 v1.0 <~-~-> DR-LWS-005;
78 -)))
79 -|(% style="width:187px" %)(((
80 -[[RS485-LN>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/154-rs485-ln.html]],
81 -)))|(% style="width:330px" %)(((
82 -LoRaWAN RS485 Modbus Converter
83 -)))|(% style="width:445px" %)(((
84 -RS485-LN v1.3 <~-~-> DR-LWS-005;
85 -)))
86 -|(% style="width:187px" %)(((
87 -[[LHT65>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/151-lht65.html]],
88 -)))|(% style="width:330px" %)(((
89 -LoRaWAN Temperature & Humidity Sensor
90 -)))|(% style="width:445px" %)(((
91 -(((
92 -LHT65 v1.7 <~-~-> DR-LWS-003;
93 -)))
94 -
95 -(((
96 -(((
35 +|(% style="width:187px" %)[[LBT1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/165-lbt1.html]],|(% style="width:349px" %)LoRaWAN BLE Indoor Tracker|(% style="width:453px" %)LBT1 v1.0 <~-~-> DR-LWS-005;
36 +|(% style="width:187px" %)[[RS485-LN>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/154-rs485-ln.html]],|(% style="width:349px" %)LoRaWAN RS485 Modbus Converter|(% style="width:453px" %)RS485-LN v1.3 <~-~-> DR-LWS-005;
37 +|(% style="width:187px" %)[[LHT65>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/151-lht65.html]],|(% style="width:349px" %)LoRaWAN Temperature & Humidity Sensor|(% style="width:453px" %)LHT65 v1.7 <~-~-> DR-LWS-003;(((
97 97  LHT65 v1.8.0 <~-~-> DR-LWS-005;~-~-> Support since this version
98 98  )))
99 -)))
100 -)))
101 101  
102 -
103 -
104 104  = 4. System Management Commands =
105 105  
106 106  == 4.1 Change Uplink Interval ==
... ... @@ -112,7 +112,7 @@
112 112  **AT Command: AT+TDC**
113 113  )))
114 114  
115 -(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
52 +(% style="background-color:#ffffcc; color:green; width:727.222px" %)
116 116  |=(% colspan="3" style="width: 724px;" %)AT+TDC
117 117  |(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
118 118  |(% style="width:165px" %)AT+TDC=?|(% style="width:227px" %)Show current transmit Interval|(% style="width:329px" %)30000(((
... ... @@ -128,19 +128,13 @@
128 128  **Downlink Command: 0x01**
129 129  {{/info}}
130 130  
131 -(((
132 132  Format: Command Code (0x01) followed by 3 bytes time value.
133 -)))
134 134  
135 -(((
136 136  If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
137 -)))
138 138  
139 139  * **Example 1**: Downlink Payload:** 0100001E** ~/~/ Set Transmit Interval (TDC) = 30 seconds
140 140  * **Example 2**: Downlink Payload:** 0100003C** ~/~/ Set Transmit Interval (TDC) = 60 seconds
141 141  
142 -
143 -
144 144  == 4.2 Reboot End Node ==
145 145  
146 146  Feature: Reboot End Node to perform a new OTAA or ABP Join.
... ... @@ -149,7 +149,7 @@
149 149  **AT Command: ATZ**
150 150  {{/info}}
151 151  
152 -(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
83 +(% border="0" style="background-color:#ffffcc; color:green; width:727.222px" %)
153 153  |=(% colspan="3" %)ATZ: Trig a reset of the MCU
154 154  |**Command Example**|**Function**|**Response**
155 155  |ATZ|Reset MCU|(((
... ... @@ -170,16 +170,10 @@
170 170  **Downlink Command: 0x04**
171 171  {{/info}}
172 172  
173 -(((
174 174  Format: Command Code (0x04) followed by FF.
175 -)))
176 176  
177 -(((
178 178  If the downlink payload=**04FF**, the end node will reboot.
179 179  
180 -
181 -)))
182 -
183 183  == 4.3 Reset to factory Default ==
184 184  
185 185  Feature: Reset the parameters to Factory Default, factory default value depends on the firmware settings, the OTAA and ABP keys will reserve after this command.
... ... @@ -188,7 +188,7 @@
188 188  **AT Command: AT+FDR**
189 189  {{/info}}
190 190  
191 -(% border="1" style="background-color:#ffffcc; color:green; width:831.222px" %)
116 +(% style="background-color:#ffffcc; color:green; width:831.222px" %)
192 192  |=(% colspan="3" style="width: 828px;" %)Reset to factory default
193 193  |(% style="width:181px" %)**Command Example**|(% style="width:181px" %)**Function**|(% style="width:465px" %)**Response**
194 194  |(% style="width:181px" %)AT+FDR|(% style="width:181px" %)Reset to factory default|(% style="width:465px" %)(((
... ... @@ -209,13 +209,9 @@
209 209  **Downlink Command: 0x04**
210 210  {{/info}}
211 211  
212 -(((
213 213  Format: Command Code (0x04) followed by FE.
214 -)))
215 215  
216 -(((
217 217  If the downlink payload=**04FE**, Reset Parameters to Factory Default, Keys Reserve.
218 -)))
219 219  
220 220  
221 221  == 4.4 Show Firmware Version ==
... ... @@ -226,10 +226,10 @@
226 226  **AT Command: AT+VER**
227 227  {{/info}}
228 228  
229 -(% border="1" style="background-color:#ffffcc; color:green; width:586px" %)
230 -|=(% colspan="3" style="width: 583px;" %)AT+VER: Image Version and Frequency Band
231 -|(% style="width:170px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:113px" %)**Response**
232 -|(% style="width:170px" %)AT+VER=?|(% style="width:300px" %)Show Image version and Frequency Band|(% style="width:113px" %)(((
150 +(% style="background-color:#ffffcc; color:green" %)
151 +|=(% colspan="3" %)AT+VER: Image Version and Frequency Band
152 +|**Command Example**|**Function**|**Response**
153 +|AT+VER=?|Show Image version and Frequency Band|(((
233 233  1.3 EU868
234 234  
235 235  OK
... ... @@ -239,25 +239,17 @@
239 239  **Downlink Command: 0x26 (Valid in 006 stack)**
240 240  {{/info}}
241 241  
242 -(((
243 243  Downlink Format: 0x26
244 -)))
245 245  
246 -(((
247 247  Device will reply with firmware version info, device info. frequency band info. detail please check device user manual. Total 5 bytes Example: If device is of firmware version 1.1.0 Upload: xx ~-~- yy ~-~- zz ~-~- 110 total 5 bytes
248 -)))
249 249  
250 -(((
251 251  **xx: Software Type:**
252 -)))
253 253  
254 254  * 0x00 01: LGT92 Version
255 255  * 0x00 02: LBT1
256 256  * 0x00 03: LSE01/LDDS75/LDDS20/LSPH01/LLMS01/LSNPK01
257 257  
258 -(((
259 259  **yy: Frequency Band:**
260 -)))
261 261  
262 262  * 0x01: EU868
263 263  * 0x02: US915
... ... @@ -270,9 +270,7 @@
270 270  * 0x09: AS923-2
271 271  * 0xa0: AS923-3
272 272  
273 -(((
274 274  **zz: Subband**
275 -)))
276 276  
277 277  firmware version: v1.1.0 ~-~-> 110
278 278  
... ... @@ -285,7 +285,7 @@
285 285  **AT Command: AT+CFG**
286 286  {{/info}}
287 287  
288 -(% border="1" style="background-color:#ffffcc; color:green; width:599.222px" %)
199 +(% style="background-color:#ffffcc; color:green; width:599.222px" %)
289 289  |=(% colspan="3" style="width: 596px;" %)AT+CFG: Print all configurations
290 290  |(% style="width:160px" %)**Command Example**|(% style="width:154px" %)**Function**|(% style="width:280px" %)**Response**
291 291  |(% style="width:160px" %)AT+CFG|(% style="width:154px" %)Show all configures|(% style="width:280px" %)(((
... ... @@ -302,8 +302,6 @@
302 302  OK
303 303  )))
304 304  
305 -
306 -
307 307  = 5. Keys, IDs and EUIs management =
308 308  
309 309  == 5.1 Application EUI ==
... ... @@ -314,7 +314,7 @@
314 314  **AT Command: AT+APPEUI**
315 315  {{/info}}
316 316  
317 -(% border="1" style="background-color:#ffffcc; color:green; width:686.222px" %)
226 +(% style="background-color:#ffffcc; color:green; width:686.222px" %)
318 318  |=(% colspan="3" style="width: 683px;" %)AT+APPEUI
319 319  |(% style="width:305px" %)**Command Example**|(% style="width:186px" %)**Function**|(% style="width:191px" %)**Response**
320 320  |(% style="width:305px" %)AT+APPEUI=?|(% style="width:186px" %)Get the Application EUI|(% style="width:191px" %)00 b3 d5 00 00 00 00 00(((
... ... @@ -322,8 +322,6 @@
322 322  )))
323 323  |(% style="width:305px" %)AT+APPEUI=00 b3 d5 7e f0 00 4d 34|(% style="width:186px" %)Set the Application EUI|(% style="width:191px" %)OK
324 324  
325 -
326 -
327 327  == 5.2 Application Key ==
328 328  
329 329  Feature: Get or Set the Application Key.
... ... @@ -332,7 +332,7 @@
332 332  **AT Command: AT+APPKEY**
333 333  {{/info}}
334 334  
335 -(% border="1" style="background-color:#ffffcc; color:green; width:976.222px" %)
242 +(% style="background-color:#ffffcc; color:green; width:976.222px" %)
336 336  |=(% colspan="3" style="width: 973px;" %)AT+APPKEY
337 337  |(% style="width:441px" %)**Command Example**|(% style="width:180px" %)**Function**|(% style="width:350px" %)**Response**
338 338  |(% style="width:441px" %)AT+APPKEY=?|(% style="width:180px" %)Get the Application Key|(% style="width:350px" %)00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35(((
... ... @@ -340,8 +340,6 @@
340 340  )))
341 341  |(% style="width:441px" %)AT+APPKEY=00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35|(% style="width:180px" %)Set the Application Key|(% style="width:350px" %)OK
342 342  
343 -
344 -
345 345  == 5.3 Application Session Key ==
346 346  
347 347  Feature: Get or Set the Application Session Key.
... ... @@ -350,7 +350,7 @@
350 350  **AT Command: AT+APPSKEY**
351 351  {{/info}}
352 352  
353 -(% border="1" style="background-color:#ffffcc; color:green; width:1040.22px" %)
258 +(% style="background-color:#ffffcc; color:green; width:1040.22px" %)
354 354  |=(% colspan="3" style="width: 1037px;" %)AT+APPSKEY
355 355  |(% style="width:451px" %)**Command Example**|(% style="width:231px" %)**Function**|(% style="width:354px" %)**Response**
356 356  |(% style="width:451px" %)AT+APPSKEY=?|(% style="width:231px" %)Get the Application Session Key|(% style="width:354px" %)00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2(((
... ... @@ -360,8 +360,6 @@
360 360  OK
361 361  )))
362 362  
363 -
364 -
365 365  == 5.4 Device Address ==
366 366  
367 367  Feature: Get or Set the Device Address.
... ... @@ -370,7 +370,7 @@
370 370  **AT Command: AT+DADDR**
371 371  {{/info}}
372 372  
373 -(% border="1" style="background-color:#ffffcc; color:green; width:795.222px" %)
276 +(% style="background-color:#ffffcc; color:green; width:795.222px" %)
374 374  |=(% colspan="3" style="width: 792px;" %)AT+DADDR
375 375  |(% style="width:192px" %)**Command Example**|(% style="width:241px" %)**Function**|(% style="width:359px" %)**Response**
376 376  |(% style="width:192px" %)AT+DADDR=?|(% style="width:241px" %)Get the Application Session Key.|(% style="width:359px" %)(While Error in format, return AT_PARAM_ERROR)(((
... ... @@ -380,8 +380,6 @@
380 380  )))
381 381  |(% style="width:192px" %)AT+DADDR=A8 40 41 FF|(% style="width:241px" %)Set the Application Session Key.|(% style="width:359px" %)OK
382 382  
383 -
384 -
385 385  == 5.5 Device EUI ==
386 386  
387 387  Feature: Get or Set the Device EUI.
... ... @@ -390,7 +390,7 @@
390 390  **AT Command: AT+DEUI**
391 391  {{/info}}
392 392  
393 -(% border="1" style="background-color:#ffffcc; color:green; width:1035.22px" %)
294 +(% style="background-color:#ffffcc; color:green; width:1035.22px" %)
394 394  |=(% colspan="3" style="width: 1032px;" %)AT+DEUI
395 395  |(% style="width:250px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:634px" %)**Response**
396 396  |(% style="width:250px" %)AT+DEUI=?|(% style="width:147px" %)Get the Device EUI.|(% style="width:634px" %)00 44 34 22 33 45 55 55(((
... ... @@ -400,8 +400,6 @@
400 400  OK
401 401  )))
402 402  
403 -
404 -
405 405  == 5.6 Network ID ==
406 406  
407 407  Feature: Get or Set the Network ID.(You can enter this command change only after successful network connection)
... ... @@ -410,7 +410,7 @@
410 410  **AT Command: AT+NWKID**
411 411  {{/info}}
412 412  
413 -(% border="1" style="background-color:#ffffcc; color:green; width:448.222px" %)
312 +(% style="background-color:#ffffcc; color:green; width:448.222px" %)
414 414  |=(% colspan="3" style="width: 445px;" %)AT+NWKID
415 415  |(% style="width:191px" %)**Command Example**|(% style="width:153px" %)**Function**|(% style="width:101px" %)**Response**
416 416  |(% style="width:191px" %)AT+NWKID=?|(% style="width:153px" %)Get the Network ID.|(% style="width:101px" %)a8 40 41 ff(((
... ... @@ -418,8 +418,6 @@
418 418  )))
419 419  |(% style="width:191px" %)AT+NWKID=A8 40 41 FF|(% style="width:153px" %)Set the Network ID.|(% style="width:101px" %)OK
420 420  
421 -
422 -
423 423  == 5.7 Network Session Key ==
424 424  
425 425  Feature: Get or Set the Network Session Key
... ... @@ -428,7 +428,7 @@
428 428  **AT Command: AT+NWKSKEY**
429 429  {{/info}}
430 430  
431 -(% border="1" style="background-color:#ffffcc; color:green; width:1017.22px" %)
328 +(% style="background-color:#ffffcc; color:green; width:1017.22px" %)
432 432  |=(% colspan="3" style="width: 1014px;" %)AT+NWKSKEY
433 433  |(% style="width:455px" %)**Command Example**|(% style="width:215px" %)**Function**|(% style="width:343px" %)**Response**
434 434  |(% style="width:455px" %)AT+NWKSKEY=?|(% style="width:215px" %)Get the Network Session Key.|(% style="width:343px" %)00 4f 19 25 52 ce 97 09 d7 fa 84 71 db 51 02 92(((
... ... @@ -436,8 +436,6 @@
436 436  )))
437 437  |(% style="width:455px" %)AT+NWKSKEY=A8 40 41 FF FF 12 34 56 00 01 02 04 05 06 06 07|(% style="width:215px" %)Set the Network Session Key.|(% style="width:343px" %)OK
438 438  
439 -
440 -
441 441  = 6. Joining and sending date on LoRaWAN network =
442 442  
443 443  == 6.1 Confirm Mode ==
... ... @@ -448,7 +448,7 @@
448 448  **AT Command: AT+CFM**
449 449  {{/info}}
450 450  
451 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
346 +(% style="background-color:#ffffcc; color:green; width:710.222px" %)
452 452  |=(% colspan="3" style="width: 707px;" %)AT+CFM
453 453  |(% style="width:155px" %)**Command Example**|(% style="width:205px" %)**Function**|(% style="width:346px" %)**Response**
454 454  |(% style="width:155px" %)AT+CFM=?|(% style="width:205px" %)Get the confirmation mode|(% style="width:346px" %)0(((
... ... @@ -466,8 +466,6 @@
466 466  * Example 1: Downlink Payload: 0501 ~/~/ Set AT+CFM=1
467 467  * Example 2: Downlink Payload: 0500 ~/~/ Set AT+CFM=0
468 468  
469 -
470 -
471 471  == 6.2 Confirm Status ==
472 472  
473 473  Feature: Get confirmation status of the last AT+SEND (0-1).
... ... @@ -476,7 +476,7 @@
476 476  **AT Command: AT+CFS**
477 477  {{/info}}
478 478  
479 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
372 +(% style="background-color:#ffffcc; color:green; width:534.222px" %)
480 480  |=(% colspan="3" style="width: 531px;" %)AT+CFS
481 481  |(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:178px" %)**Response**
482 482  |(% style="width:156px" %)AT+CFS=?|(% style="width:193px" %)Get confirmation status|(% style="width:178px" %)0(((
... ... @@ -483,8 +483,6 @@
483 483  OK
484 484  )))
485 485  
486 -
487 -
488 488  == 6.3 Join LoRa® Network ==
489 489  
490 490  Feature: Join network.
... ... @@ -493,7 +493,7 @@
493 493  **AT Command: AT+JOIN**
494 494  {{/info}}
495 495  
496 -(% border="1" style="background-color:#ffffcc; color:green; width:647.222px" %)
387 +(% style="background-color:#ffffcc; color:green; width:647.222px" %)
497 497  |=(% colspan="3" style="width: 644px;" %)AT+JOIN
498 498  |(% style="width:163px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:334px" %)**Response**
499 499  |(% style="width:163px" %)AT+JOIN ?|(% style="width:147px" %)Get imformation.|(% style="width:334px" %)AT+JOIN: Join network(((
... ... @@ -502,8 +502,6 @@
502 502  While Error in format, return AT_BUSY_ERROR
503 503  )))
504 504  
505 -
506 -
507 507  == 6.4 LoRa® Network Join Mode ==
508 508  
509 509  Feature: Get or Set the Network Join Mode. (0: ABP, 1: OTAA).
... ... @@ -512,7 +512,7 @@
512 512  **AT Command: AT+NJM**
513 513  {{/info}}
514 514  
515 -(% border="1" style="background-color:#ffffcc; color:green; width:753.222px" %)
404 +(% style="background-color:#ffffcc; color:green; width:753.222px" %)
516 516  |=(% colspan="3" style="width: 750px;" %)AT+NJM
517 517  |(% style="width:162px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:361px" %)**Response**
518 518  |(% style="width:162px" %)AT+NJM=?|(% style="width:227px" %)Get the Network Join Mode|(% style="width:361px" %)1(((
... ... @@ -540,7 +540,7 @@
540 540  **AT Command: AT+NJS**
541 541  {{/info}}
542 542  
543 -(% border="1" style="background-color:#ffffcc; color:green; width:498.222px" %)
432 +(% style="background-color:#ffffcc; color:green; width:498.222px" %)
544 544  |=(% colspan="3" style="width: 495px;" %)AT+NJS
545 545  |(% style="width:169px" %)**Command Example**|(% style="width:164px" %)**Function**|(% style="width:161px" %)**Response**
546 546  |(% style="width:169px" %)AT+NJS=?|(% style="width:164px" %)Get the join status.|(% style="width:161px" %)0(((
... ... @@ -555,7 +555,7 @@
555 555  **AT Command: AT+RECV**
556 556  {{/info}}
557 557  
558 -(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
447 +(% style="background-color:#ffffcc; color:green; width:587.222px" %)
559 559  |=(% colspan="3" style="width: 584px;" %)AT+RECV
560 560  |(% style="width:161px" %)**Command Example**|(% style="width:272px" %)**Function**|(% style="width:150px" %)**Response**
561 561  |(% style="width:161px" %)AT+RECV=?|(% style="width:272px" %)print last received data in raw format.|(% style="width:150px" %)0:(((
... ... @@ -570,7 +570,7 @@
570 570  **AT Command: AT+RECVB**
571 571  {{/info}}
572 572  
573 -(% border="1" style="background-color:#ffffcc; color:green; width:793.222px" %)
462 +(% style="background-color:#ffffcc; color:green; width:793.222px" %)
574 574  |=(% colspan="3" style="width: 790px;" %)AT+RECVB
575 575  |(% style="width:173px" %)**Command Example**|(% style="width:497px" %)**Function**|(% style="width:120px" %)**Response**
576 576  |(% style="width:173px" %)AT+RECVB=?|(% style="width:497px" %)print last received data in binary format (with hexadecimal values).|(% style="width:120px" %)2: 0010(((
... ... @@ -585,7 +585,7 @@
585 585  **AT Command: AT+SEND**
586 586  {{/info}}
587 587  
588 -(% border="1" style="background-color:#ffffcc; color:green; width:991.222px" %)
477 +(% style="background-color:#ffffcc; color:green; width:991.222px" %)
589 589  |=(% colspan="3" style="width: 988px;" %)AT+SEND
590 590  |(% style="width:201px" %)**Command Example**|(% style="width:340px" %)**Function**|(% style="width:446px" %)**Response**
591 591  |(% style="width:201px" %)AT+SEND=12:hello world|(% style="width:340px" %)Send text data along with the application port.|(% style="width:446px" %)OK(((
... ... @@ -604,7 +604,7 @@
604 604  **AT Command: AT+SENDB**
605 605  {{/info}}
606 606  
607 -(% border="1" style="background-color:#ffffcc; color:green; width:1120.22px" %)
496 +(% style="background-color:#ffffcc; color:green; width:1120.22px" %)
608 608  |=(% colspan="3" style="width: 1117px;" %)AT+SENDB
609 609  |(% style="width:257px" %)**Command Example**|(% style="width:406px" %)**Function**|(% style="width:453px" %)**Response**
610 610  |(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)OK
... ... @@ -624,7 +624,7 @@
624 624  **AT Command: AT+ADR**
625 625  {{/info}}
626 626  
627 -(% border="1" style="background-color:#ffffcc; color:green; width:683.222px" %)
516 +(% style="background-color:#ffffcc; color:green; width:683.222px" %)
628 628  |=(% colspan="3" style="width: 680px;" %)AT+ADR
629 629  |(% style="width:162px" %)**Command Example**|(% style="width:266px" %)**Function**|(% style="width:250px" %)**Response**
630 630  |(% style="width:162px" %)AT+ADR=?|(% style="width:266px" %)Get the Adaptive Data Rate setting.|(% style="width:250px" %)1(((
... ... @@ -653,7 +653,7 @@
653 653  **AT Command:AT+CLASS**
654 654  {{/info}}
655 655  
656 -(% border="1" style="background-color:#ffffcc; color:green; width:507.222px" %)
545 +(% style="background-color:#ffffcc; color:green; width:507.222px" %)
657 657  |=(% colspan="3" style="width: 504px;" %)AT+CLASS
658 658  |(% style="width:163px" %)**Command Example**|(% style="width:166px" %)**Function**|(% style="width:175px" %)**Response**
659 659  |(% style="width:163px" %)AT+CLASS=?|(% style="width:166px" %)Get the Device Class.|(% style="width:175px" %)A(((
... ... @@ -671,7 +671,7 @@
671 671  **AT Command:AT+DCS**
672 672  {{/info}}
673 673  
674 -(% border="1" style="background-color:#ffffcc; color:green; width:515.222px" %)
563 +(% style="background-color:#ffffcc; color:green; width:515.222px" %)
675 675  |=(% colspan="3" style="width: 512px;" %)AT+DCS
676 676  |(% style="width:165px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:107px" %)**Response**
677 677  |(% style="width:165px" %)AT+DCS=?|(% style="width:239px" %)Get the ETSI Duty Cycle setting.|(% style="width:107px" %)1(((
... ... @@ -689,7 +689,7 @@
689 689  **AT Command: AT+DR**
690 690  {{/info}}
691 691  
692 -(% border="1" style="background-color:#ffffcc; color:green; width:466.222px" %)
581 +(% style="background-color:#ffffcc; color:green; width:466.222px" %)
693 693  |=(% colspan="3" style="width: 463px;" %)AT+DR
694 694  |(% style="width:156px" %)**Command Example**|(% style="width:167px" %)**Function**|(% style="width:140px" %)**Response**
695 695  |(% style="width:156px" %)AT+DR=?|(% style="width:167px" %)Get the Data Rate.|(% style="width:140px" %)5(((
... ... @@ -717,7 +717,7 @@
717 717  **AT Command:AT+FCD**
718 718  {{/info}}
719 719  
720 -(% border="1" style="background-color:#ffffcc; color:green; width:693.222px" %)
609 +(% style="background-color:#ffffcc; color:green; width:693.222px" %)
721 721  |=(% colspan="3" style="width: 690px;" %)AT+FCD
722 722  |(% style="width:162px" %)**Command Example**|(% style="width:258px" %)**Function**|(% style="width:269px" %)**Response**
723 723  |(% style="width:162px" %)AT+FCD=?|(% style="width:258px" %)Get the Frame Counter Downlink.|(% style="width:269px" %)0(((
... ... @@ -737,7 +737,7 @@
737 737  **AT Command:AT+FCU**
738 738  {{/info}}
739 739  
740 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
629 +(% style="background-color:#ffffcc; color:green; width:534.222px" %)
741 741  |=(% colspan="3" style="width: 531px;" %)AT+FCU
742 742  |(% style="width:177px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:113px" %)**Response**
743 743  |(% style="width:177px" %)AT+FCU=?|(% style="width:239px" %)Get the Frame Counter Uplink.|(% style="width:113px" %)0(((
... ... @@ -755,7 +755,7 @@
755 755  **AT Command:AT+JN1DL**
756 756  {{/info}}
757 757  
758 -(% border="1" style="background-color:#ffffcc; color:green; width:537.222px" %)
647 +(% style="background-color:#ffffcc; color:green; width:537.222px" %)
759 759  |=(% colspan="3" style="width: 534px;" %)AT+JN1DL
760 760  |(% style="width:164px" %)**Command Example**|(% style="width:229px" %)**Function**|(% style="width:140px" %)**Response**
761 761  |(% style="width:164px" %)AT+JN1DL=?|(% style="width:229px" %)Get the Join Accept Delay.|(% style="width:140px" %)5000(((
... ... @@ -773,7 +773,7 @@
773 773  **AT Command:AT+JN2DL**
774 774  {{/info}}
775 775  
776 -(% border="1" style="background-color:#ffffcc; color:green; width:538.222px" %)
665 +(% style="background-color:#ffffcc; color:green; width:538.222px" %)
777 777  |=(% colspan="3" style="width: 535px;" %)AT+JN2DL
778 778  |(% style="width:160px" %)**Command Example**|(% style="width:228px" %)**Function**|(% style="width:146px" %)**Response**
779 779  |(% style="width:160px" %)AT+JN2DL=?|(% style="width:228px" %)Get the Join Accept Delay.|(% style="width:146px" %)6000(((
... ... @@ -791,7 +791,7 @@
791 791  **AT Command:AT+PNM**
792 792  {{/info}}
793 793  
794 -(% border="1" style="background-color:#ffffcc; color:green; width:667.222px" %)
683 +(% style="background-color:#ffffcc; color:green; width:667.222px" %)
795 795  |=(% colspan="3" style="width: 664px;" %)AT+PNM
796 796  |(% style="width:166px" %)**Command Example**|(% style="width:225px" %)**Function**|(% style="width:272px" %)**Response**
797 797  |(% style="width:166px" %)AT+PNM=?|(% style="width:225px" %)Get the public network mode.|(% style="width:272px" %)1(((
... ... @@ -811,7 +811,7 @@
811 811  **AT Command:AT+RX1DL**
812 812  {{/info}}
813 813  
814 -(% border="1" style="background-color:#ffffcc; color:green; width:408.222px" %)
703 +(% style="background-color:#ffffcc; color:green; width:408.222px" %)
815 815  |=(% colspan="3" style="width: 405px;" %)AT+RX1DL
816 816  |(% style="width:155px" %)**Command Example**|(% style="width:128px" %)**Function**|(% style="width:122px" %)**Response**
817 817  |(% style="width:155px" %)AT+RX1DL=?|(% style="width:128px" %)Get the delay.|(% style="width:122px" %)1000(((
... ... @@ -821,21 +821,18 @@
821 821  
822 822  )))
823 823  
824 -== 7.11 Receive Delay2 ==
713 +== 7.11Receive Delay2 ==
825 825  
826 826  Feature: Get or Set the delay between the end of the Tx and the Rx Window 2 in ms
827 827  
828 -{{info}}
829 -**AT Command:AT+RX2DL**
830 -{{/info}}
717 +AT Command:AT+RX2DL
831 831  
832 -(% border="1" style="background-color:#ffffcc; color:green; width:481.222px" %)
833 -|=(% colspan="3" style="width: 478px;" %)AT+RX2DL
834 -|(% style="width:175px" %)**Command Example**|(% style="width:152px" %)**Function**|(% style="width:150px" %)**Response**
835 -|(% style="width:175px" %)AT+RX2DL=?|(% style="width:152px" %)Get the delay.|(% style="width:150px" %)2000(((
719 +|=(% colspan="3" %)AT+RX2DL
720 +|**Command Example**|**Function**|**Response**
721 +|AT+RX2DL=?|Get the delay.|2000(((
836 836  OK
837 837  )))
838 -|(% style="width:175px" %)AT+RX2DL=2500|(% style="width:152px" %)Set the delay.|(% style="width:150px" %)OK(((
724 +|AT+RX2DL=2500|Set the delay.|OK(((
839 839  
840 840  )))
841 841  
... ... @@ -843,17 +843,14 @@
843 843  
844 844  Feature: Get or Set the Rx2 window data rate (0-7 corresponding to DR_X)
845 845  
846 -{{info}}
847 -**AT Command:AT+RX2DR**
848 -{{/info}}
732 +AT Command:AT+RX2DR
849 849  
850 -(% border="1" style="background-color:#ffffcc; color:green; width:525.222px" %)
851 -|=(% colspan="3" style="width: 522px;" %)AT+RX2DR
852 -|(% style="width:160px" %)**Command Example**|(% style="width:232px" %)**Function**|(% style="width:130px" %)**Response**
853 -|(% style="width:160px" %)AT+RX2DR=?|(% style="width:232px" %)Get the Rx2 window data rate.|(% style="width:130px" %)2(((
734 +|=(% colspan="3" %)AT+RX2DR
735 +|**Command Example**|**Function**|**Response**
736 +|AT+RX2DR=?|Get the Rx2 window data rate.|2(((
854 854  OK
855 855  )))
856 -|(% style="width:160px" %)AT+RX2DR=6|(% style="width:232px" %)Set the Rx2 window data rate.|(% style="width:130px" %)OK(((
739 +|AT+RX2DR=6|Set the Rx2 window data rate.|OK(((
857 857  
858 858  )))
859 859  
... ... @@ -861,17 +861,14 @@
861 861  
862 862  Feature: Get or Set the Rx2 window frequency
863 863  
864 -{{info}}
865 -**AT Command:AT+RX2FQ**
866 -{{/info}}
747 +AT Command:AT+RX2FQ
867 867  
868 -(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
869 -|=(% colspan="3" style="width: 584px;" %)AT+RX2FQ
870 -|(% style="width:183px" %)**Command Example**|(% style="width:240px" %)**Function**|(% style="width:160px" %)**Response**
871 -|(% style="width:183px" %)AT+RX2FQ=?|(% style="width:240px" %)Get the Rx2 window frequency.|(% style="width:160px" %)434665000(((
749 +|=(% colspan="3" %)AT+RX2FQ
750 +|**Command Example**|**Function**|**Response**
751 +|AT+RX2FQ=?|Get the Rx2 window frequency.|434665000(((
872 872  OK
873 873  )))
874 -|(% style="width:183px" %)AT+RX2FQ=434665000|(% style="width:240px" %)Set the Rx2 window frequency.|(% style="width:160px" %)OK(((
754 +|AT+RX2FQ=434665000|Set the Rx2 window frequency.|OK(((
875 875  
876 876  )))
877 877  
... ... @@ -879,17 +879,14 @@
879 879  
880 880  Feature: Get or Set the Transmit Power(0-5, MAX:0, MIN:5, according to LoRaWAN Spec, or 40=10dB, 41 = 11dB, …, 50 = 20dB which is out of LoRaWAN spec. )
881 881  
882 -{{info}}
883 -**AT Command:AT+TXP**
884 -{{/info}}
762 +AT Command:AT+TXP
885 885  
886 -(% border="1" style="background-color:#ffffcc; color:green; width:465.222px" %)
887 -|=(% colspan="3" style="width: 462px;" %)AT+TXP
888 -|(% style="width:161px" %)**Command Example**|(% style="width:189px" %)**Function**|(% style="width:112px" %)**Response**
889 -|(% style="width:161px" %)AT+TXP=?|(% style="width:189px" %)Get the Transmit Power.|(% style="width:112px" %)0(((
764 +|=(% colspan="3" %)AT+TXP
765 +|**Command Example**|**Function**|**Response**
766 +|AT+TXP=?|Get the Transmit Power.|0(((
890 890  OK
891 891  )))
892 -|(% style="width:161px" %)AT+TXP=1|(% style="width:189px" %)Set the Transmit Power.|(% style="width:112px" %)OK(((
769 +|AT+TXP=1|Set the Transmit Power.|OK(((
893 893  
894 894  )))
895 895  
... ... @@ -897,21 +897,18 @@
897 897  
898 898  If the downlink payload=22000100, it means setting the TXP to 0.
899 899  
900 -* **Example 1**: Downlink Payload: **22000102** ~/~/ Set AT+TXP=2.
901 -* **Example 2**: Downlink Payload: **220000FF** ~/~/ Set AT+TXP=0.
777 +* Example 1: Downlink Payload: 22000102 ~/~/ Set AT+TXP=2.
778 +* Example 2: Downlink Payload: 220000FF ~/~/ Set AT+TXP=0.
902 902  
903 903  == 7.15 RSSI of the Last Received Packet ==
904 904  
905 905  Feature: Get or Set the Rx2 window frequency
906 906  
907 -{{info}}
908 -**AT Command:AT+RSSI**
909 -{{/info}}
784 +AT Command:AT+RSSI
910 910  
911 -(% border="1" style="background-color:#ffffcc; color:green; width:557.222px" %)
912 -|=(% colspan="3" style="width: 554px;" %)AT+RSSI
913 -|(% style="width:164px" %)**Command Example**|(% style="width:289px" %)**Function**|(% style="width:100px" %)**Response**
914 -|(% style="width:164px" %)AT+RSSI=?|(% style="width:289px" %)Get the RSSI of the last received packet.|(% style="width:100px" %)0(((
786 +|=(% colspan="3" %)AT+RSSI
787 +|**Command Example**|**Function**|**Response**
788 +|AT+RSSI=?|Get the RSSI of the last received packet.|0(((
915 915  OK
916 916  )))
917 917  
... ... @@ -919,14 +919,11 @@
919 919  
920 920  Feature: Get the SNR of the last received packet
921 921  
922 -{{info}}
923 -**AT Command:AT+SNR**
924 -{{/info}}
796 +AT Command:AT+SNR
925 925  
926 -(% border="1" style="background-color:#ffffcc; color:green; width:571.222px" %)
927 -|=(% colspan="3" style="width: 568px;" %)AT+SNR
928 -|(% style="width:164px" %)**Command Example**|(% style="width:290px" %)**Function**|(% style="width:113px" %)**Response**
929 -|(% style="width:164px" %)AT+SNR=?|(% style="width:290px" %)Get the RSSI of the last received packet.|(% style="width:113px" %)0(((
798 +|=(% colspan="3" %)AT+SNR
799 +|**Command Example**|**Function**|**Response**
800 +|AT+SNR=?|Get the RSSI of the last received packet.|0(((
930 930  OK
931 931  )))
932 932  
... ... @@ -934,144 +934,114 @@
934 934  
935 935  Feature: Get or set the application port.
936 936  
937 -{{info}}
938 -**AT Command: AT+PORT**
939 -{{/info}}
808 +AT Command: AT+PORT
940 940  
941 -(% border="1" style="background-color:#ffffcc; color:green; width:500.222px" %)
942 -|=(% colspan="3" style="width: 497px;" %)AT+PORT
943 -|(% style="width:157px" %)**Command Example**|(% style="width:204px" %)**Function**|(% style="width:135px" %)**Response**
944 -|(% style="width:157px" %)AT+PORT=?|(% style="width:204px" %)Get the application port|(% style="width:135px" %)21(((
810 +|=(% colspan="3" %)AT+PORT
811 +|**Command Example**|**Function**|**Response**
812 +|AT+PORT=?|Get the application port|21(((
945 945  OK
946 946  )))
947 -|(% style="width:157px" %)AT+PORT=21|(% style="width:204px" %)Set the application port|(% style="width:135px" %)OK
815 +|AT+PORT=21|Set the application port|OK
948 948  
949 -{{info}}
950 -**Downlink Command: 0x23**
951 -{{/info}}
817 +Downlink Command: 0x23
952 952  
953 953  Format: Command Code (0x23) followed by 1 bytes port value.
954 954  
955 955  If the downlink payload=2301, it means set the application port to 1, while type code is 23.
956 956  
957 -* **Example 1**: Downlink Payload: **2301** ~/~/ set the application port to 1
958 -* **Example 2**: Downlink Payload:** 2305** ~/~/ set the application port to 5
823 +* Example 1: Downlink Payload: 2301 ~/~/ set the application port to 1
824 +* Example 2: Downlink Payload: 2305 ~/~/ set the application port to 5
959 959  
960 960  == 7.18 Single Channel Mode ==
961 961  
962 962  Feature:Get or Set Frequency (Unit: Hz) for Single Channel Mode.
963 963  
964 -{{info}}
965 -**AT Command: AT+CHS**
966 -{{/info}}
830 +AT Command: AT+CHS
967 967  
968 -(% border="1" style="background-color:#ffffcc; color:green; width:603.222px" %)
969 -|=(% colspan="3" style="width: 600px;" %)AT+CHS
970 -|(% style="width:182px" %)**Command Example**|(% style="width:295px" %)**Function**|(% style="width:122px" %)**Response**
971 -|(% style="width:182px" %)AT+CHS=?|(% style="width:295px" %)Get Frequency for Single Channel Mode|(% style="width:122px" %)0(((
832 +|=(% colspan="3" %)AT+CHS
833 +|**Command Example**|**Function**|**Response**
834 +|AT+CHS=?|Get Frequency for Single Channel Mode|0(((
972 972  OK
973 973  )))
974 -|(% style="width:182px" %)AT+CHS=868100000|(% style="width:295px" %)Set Frequency for Single Channel Mode|(% style="width:122px" %)OK
837 +|AT+CHS=868100000|Set Frequency for Single Channel Mode|OK
975 975  
976 976  == 7.19 Eight Channel Mode ==
977 977  
978 978  Feature: Get or Set eight channels mode,Only for US915,AU915,CN470.
979 979  
980 -{{info}}
981 -**AT Command: AT+CHE**
982 -{{/info}}
843 +AT Command: AT+CHE
983 983  
984 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
985 -|=(% colspan="3" style="width: 707px;" %)AT+CHE
986 -|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
987 -|(% style="width:160px" %)AT+CHE=?|(% style="width:198px" %)Get eight channels mode|(% style="width:349px" %)1(((
845 +|=(% colspan="3" %)AT+CHE
846 +|**Command Example**|**Function**|**Response**
847 +|AT+CHE=?|Get eight channels mode|1(((
988 988  902.3 902.5 902.7 902.9 903.1 903.3 903.5 903.7
989 989  
990 990  OK
991 991  )))
992 -|(% style="width:160px" %)AT+CHE=1|(% style="width:198px" %)Set eight channels mode|(% style="width:349px" %)OK
852 +|AT+CHE=1|Set eight channels mode|OK
993 993  
994 -{{info}}
995 -**Downlink Command: 0x24**
996 -{{/info}}
854 +Downlink Command: 0x24
997 997  
998 998  Format: Command Code (0x24) followed by 1 bytes channel value.
999 999  
1000 1000  If the downlink payload=2401, it means set channel mode to 1, while type code is 24.
1001 1001  
1002 -* **Example 1**: Downlink Payload: 2401 ~/~/ set channel mode to 1
1003 -* **Example 2**: Downlink Payload: 2405 ~/~/ set channel mode to 5
860 +* Example 1: Downlink Payload: 2401 ~/~/ set channel mode to 1
861 +* Example 2: Downlink Payload: 2405 ~/~/ set channel mode to 5
1004 1004  
1005 1005  == 7.20 Get or Set RXwindows1 timeout ==
1006 1006  
1007 1007  Feature:Get or Set the number of symbols to detect and timeout from RXwindow1(0 to 255).
1008 1008  
1009 -{{info}}
1010 -**AT Command: AT+RX1WTO**
1011 -{{/info}}
867 +AT Command: AT+RX1WTO
1012 1012  
1013 -(% border="1" style="background-color:#ffffcc; color:green; width:460.222px" %)
1014 -|=(% colspan="3" style="width: 457px;" %)AT+ RX1WTO
1015 -|(% style="width:163px" %)**Command Example**|(% style="width:201px" %)**Function**|(% style="width:93px" %)**Response**
1016 -|(% style="width:163px" %)AT+RX1WTO=?|(% style="width:201px" %)Get RXwindows1 timeout|(% style="width:93px" %)14(((
869 +|=(% colspan="3" %)AT+ RX1WTO
870 +|**Command Example**|**Function**|**Response**
871 +|AT+RX1WTO=?|Get RXwindows1 timeout|14(((
1017 1017  OK
1018 1018  )))
1019 -|(% style="width:163px" %)AT+RX1WTO=60|(% style="width:201px" %)Set RXwindows1 timeout|(% style="width:93px" %)OK
874 +|AT+RX1WTO=60|Set RXwindows1 timeout|OK
1020 1020  
1021 -(((
1022 -**AT+RX1TWO** is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
1023 -)))
876 +AT+RX1TWO is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
1024 1024  
1025 -[[image:image-20220526162535-1.png]]
878 +[[~[~[image:https://wiki.dragino.com/images/thumb/5/51/RX1WTO.JPG/600px-RX1WTO.JPG~|~|alt="RX1WTO.JPG" height="239" width="600"~]~]>>url:https://wiki.dragino.com/index.php/File:RX1WTO.JPG]]
1026 1026  
1027 -(((
1028 1028  Increasing thisvalue is equal to extending the time that the receiving window is opened, butthe corresponding power consumption will also increase. Properly increasingthis value can increase the success rate of the downlink.
1029 1029  
1030 -
1031 -)))
1032 -
1033 1033  == 7.21 Get or Set RXwindows2 timeout ==
1034 1034  
1035 1035  Feature:Get or Set the number of symbols to detect and timeout from RXwindow2(0 to 255).
1036 1036  
1037 -{{info}}
1038 -**AT Command: AT+RX2WTO**
1039 -{{/info}}
886 +AT Command: AT+RX2WTO
1040 1040  
1041 -(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
1042 -|=(% colspan="3" style="width: 494px;" %)AT+ RX2WTO
1043 -|(% style="width:190px" %)**Command Example**|(% style="width:199px" %)**Function**|(% style="width:104px" %)**Response**
1044 -|(% style="width:190px" %)AT+RX2WTO=?|(% style="width:199px" %)Get RXwindows2 timeout|(% style="width:104px" %)7(((
888 +|=(% colspan="3" %)AT+ RX2WTO
889 +|**Command Example**|**Function**|**Response**
890 +|AT+RX2WTO=?|Get RXwindows2 timeout|7(((
1045 1045  OK
1046 1046  )))
1047 -|(% style="width:190px" %)AT+RX2WTO=20|(% style="width:199px" %)Set RXwindows2 timeout|(% style="width:104px" %)OK
893 +|AT+RX2WTO=20|Set RXwindows2 timeout|OK
1048 1048  
1049 1049  == 7.22 Setting up uplinkdwelltime (as923, au915) ==
1050 1050  
1051 1051  Feature: Get or Set uplinkdwelltime
1052 1052  
1053 -{{info}}
1054 -**AT Command: AT+DWELLT**
1055 -{{/info}}
899 +AT Command: AT+DWELLT
1056 1056  
1057 -(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
1058 -|=(% colspan="3" style="width: 494px;" %)AT+DWELLT
1059 -|(% style="width:183px" %)**Command Example**|(% style="width:179px" %)**Function**|(% style="width:131px" %)**Response**
1060 -|(% style="width:183px" %)AT+DWELLT=?|(% style="width:179px" %)Get uplinkdwelltime|(% style="width:131px" %)1(((
901 +|=(% colspan="3" %)AT+DWELLT
902 +|**Command Example**|**Function**|**Response**
903 +|AT+DWELLT=?|Get uplinkdwelltime|1(((
1061 1061  OK
1062 1062  )))
1063 -|(% style="width:183px" %)AT+DWELLT=0|(% style="width:179px" %)Set uplinkdwelltime|(% style="width:131px" %)OK
906 +|AT+DWELLT=0|Set uplinkdwelltime|OK
1064 1064  
1065 -{{info}}
1066 -**Downlink Command: 0x25**
1067 -{{/info}}
908 +Downlink Command: 0x25
1068 1068  
1069 1069  Format: Command Code (0x25) followed by 1 bytes state value.
1070 1070  
1071 1071  If the downlink payload=2501, it means set uplinkdwelltime to 1, while type code is 25.
1072 1072  
1073 -* **Example 1**: Downlink Payload: **2501** ~/~/ set uplinkdwelltime to 1
1074 -* **Example 2**: Downlink Payload: **2500** ~/~/ set uplinkdwelltime to 0
914 +* Example 1: Downlink Payload: 2501 ~/~/ set uplinkdwelltime to 1
915 +* Example 2: Downlink Payload: 2500 ~/~/ set uplinkdwelltime to 0
1075 1075  
1076 1076  == 7.23 Set Packet Receiving Response Level ==
1077 1077  
... ... @@ -1079,11 +1079,11 @@
1079 1079  
1080 1080  RPL value:
1081 1081  
1082 -* **AT+RPL=0:** Device won't immediately reply any downlink commands from platform.
1083 -* **AT+RPL=1:** Device will immediately reply message to Unconfirmed Data Down. Payload is 0x00.
1084 -* **AT+RPL=2:** Device will immediately reply message to Confirmed Data Down. Payload is 0x00 and requied response header for this command.
1085 -* **AT+RPL=3:** Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command.
1086 -* **AT+RPL=4: **Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands.
923 +* AT+RPL=0: Device won't immediately reply any downlink commands from platform.
924 +* AT+RPL=1: Device will immediately reply message to Unconfirmed Data Down. Payload is 0x00.
925 +* AT+RPL=2: Device will immediately reply message to Confirmed Data Down. Payload is 0x00 and requied response header for this command.
926 +* AT+RPL=3: Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command.
927 +* AT+RPL=4: Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands.
1087 1087  
1088 1088  Case Analyes:
1089 1089  
... ... @@ -1091,44 +1091,37 @@
1091 1091  * For Class C devices used in ChirpStack, need to set AT+RPL=4 because Chirpstack require immedietely reply message to MAC Command.
1092 1092  * For Class C devices used in TTI, need to set AT+RPL=4 because TTI require immediately reply message to Confirmed Data Down & MAC Command.
1093 1093  
1094 -{{info}}
1095 -**AT Command: AT+RPL**
1096 -{{/info}}
935 +AT Command: AT+RPL
1097 1097  
1098 -(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1099 -|=(% colspan="3" style="width: 533px;" %)AT+RPL
1100 -|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1101 -|(% style="width:160px" %)AT+RPL=?|(% style="width:263px" %)Get packet receiving response level|(% style="width:109px" %)1(((
937 +|=(% colspan="3" %)AT+RPL
938 +|**Command Example**|**Function**|**Response**
939 +|AT+RPL=?|Get packet receiving response level|1(((
1102 1102  OK
1103 1103  )))
1104 -|(% style="width:160px" %)AT+RPL=0|(% style="width:263px" %)Set packet receiving response level|(% style="width:109px" %)OK
942 +|AT+RPL=0|Set packet receiving response level|OK
1105 1105  
1106 -{{info}}
1107 -**Downlink Command: 0x21**
1108 -{{/info}}
944 +Downlink Command: 0x21
1109 1109  
1110 1110  Format: Command Code (0x21) followed by 1 bytes level value.
1111 1111  
1112 1112  If the downlink payload=2101, it means set packet receiving response level to 1, while type code is 21.
1113 1113  
1114 -* **Example 1**: Downlink Payload: **2101** ~/~/ set packet receiving response level to 1
1115 -* **Example 2**: Downlink Payload: **2102** ~/~/ set packet receiving response level to 2
950 +* Example 1: Downlink Payload: 2101 ~/~/ set packet receiving response level to 1
951 +* Example 2: Downlink Payload: 2102 ~/~/ set packet receiving response level to 2
1116 1116  
1117 1117  = 8. AT Commands Combination =
1118 1118  
1119 1119  == 8.1 Set a fix RX2DR for downlink window ==
1120 1120  
1121 -* **AT+ADR=0 **~-~-> Disable ADR first
1122 -* **AT+RX2DR=xxxx** ~-~-> Set xxxx to your wanted DataRate
957 +* AT+ADR=0 ~-~-> Disable ADR first
958 +* AT+RX2DR=xxxx ~-~-> Set xxxx to your wanted DataRate
1123 1123  
1124 1124  == 8.2 Use Downlink Command to set a fix uplink DR ==
1125 1125  
1126 -{{info}}
1127 -**Downlink Command: 0x22000500**
1128 -{{/info}}
962 +Downlink Command: 0x22000500
1129 1129  
1130 1130  Same as:
1131 1131  
1132 -* AT+ADR=0  [[Reference>>||anchor="H7.1AdaptiveDataRate"]]
1133 -* AT+DR=5  [[Reference>>||anchor="H7.4DataRate"]]
1134 -* AT+TXP=0  [[Reference>>||anchor="H7.14TransmitPower"]]
966 +* AT+ADR=0 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Adaptive_Data_Rate]]
967 +* AT+DR=5 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Data_Rate]]
968 +* AT+TXP=0 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Transmit_Power]]
image-20220511120050-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -136.3 KB
Content
image-20220526162535-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -149.4 KB
Content

Applications

Navigation

Copyright ©2010-2022 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0