Last modified by kai on 2024/09/06 10:00
<
From version < 38.112 >
edited by Xiaoling
on 2022/06/01 11:55
To version < 50.5 >
edited by Xiaoling
on 2022/07/13 12:01
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,4 +1,4 @@
1 - **Contents：**
1 + **Table of** **Contents：**
2 2  
3 3  {{toc/}}
4 4  
... ... @@ -6,6 +6,7 @@
6 6  
7 7  = 1. Introduction =
8 8  
9 +
9 9  Dragino LoRaWAN End Node support two types of AT Commands and Downlink Commands:
10 10  
11 11  * **Common Commands:** They should be available for each sensor, such as: change uplink interval, reset device.
... ... @@ -18,6 +18,7 @@
18 18  
19 19  = 2. How to use AT Commands or Downlink command =
20 20  
22 +
21 21  * For AT Command , See Devices User Manual for Device. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
22 22  * For LoRaWAN Downlink: The gateway transfer downlink command in HEX format. This page shows the HEX format downlink code for each command. but some servers use base64 as downlink code. Below are reference for how to use downlink command:
23 23  ** Use HEX format to send a downlink: [[TTN v3>>Notes for TTN]]
... ... @@ -28,6 +28,7 @@
28 28  
29 29  = 3. Support End Node and firmware version =
30 30  
33 +
31 31  (% border="1" style="background-color:#ffffcc; color:green; width:966px" %)
32 32  |=(% colspan="3" style="width: 963px;" %)(((
33 33  Dragino STM32 base hardware Firmware / LoRaWAN stack list
... ... @@ -103,14 +103,13 @@
103 103  
104 104  = 4. System Management Commands =
105 105  
109 +
106 106  == 4.1 Change Uplink Interval ==
107 107  
112 +
108 108  Feature: Change LoRaWAN End Node Transmit Interval.
109 109  
110 -(% class="box infomessage" %)
111 -(((
112 -**AT Command: AT+TDC**
113 -)))
115 +(% style="color:blue" %)**AT Command: AT+TDC**
114 114  
115 115  (% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
116 116  |=(% colspan="3" style="width: 724px;" %)AT+TDC
... ... @@ -124,11 +124,11 @@
124 124  Set transmit interval to 60000ms = 60 seconds
125 125  )))
126 126  
127 -{{info}}
128 -**Downlink Command: 0x01**
129 -{{/info}}
130 -
131 131  (((
130 +
131 +
132 +(% style="color:blue" %)**Downlink Command: 0x01**
133 +
132 132  Format: Command Code (0x01) followed by 3 bytes time value.
133 133  )))
134 134  
... ... @@ -143,12 +143,13 @@
143 143  
144 144  == 4.2 Reboot End Node ==
145 145  
148 +
146 146  Feature: Reboot End Node to perform a new OTAA or ABP Join.
147 147  
148 -{{info}}
149 -**AT Command: ATZ**
150 -{{/info}}
151 151  
152 +(% style="color:blue" %)**AT Command: ATZ**
153 +
154 +
152 152  (% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
153 153  |=(% colspan="3" %)ATZ: Trig a reset of the MCU
154 154  |**Command Example**|**Function**|**Response**
... ... @@ -166,10 +166,10 @@
166 166  <followed by the Tx and Rx information>
167 167  )))
168 168  
169 -{{info}}
170 -**Downlink Command: 0x04**
171 -{{/info}}
172 172  
173 +(% style="color:blue" %)**Downlink Command: 0x04**
174 +
175 +
173 173  (((
174 174  Format: Command Code (0x04) followed by FF.
175 175  )))
... ... @@ -182,11 +182,10 @@
182 182  
183 183  == 4.3 Reset to factory Default ==
184 184  
188 +
185 185  Feature: Reset the parameters to Factory Default, factory default value depends on the firmware settings, the OTAA and ABP keys will reserve after this command.
186 186  
187 -{{info}}
188 -**AT Command: AT+FDR**
189 -{{/info}}
191 +(% style="color:blue" %)**AT Command: AT+FDR**
190 190  
191 191  (% border="1" style="background-color:#ffffcc; color:green; width:831.222px" %)
192 192  |=(% colspan="3" style="width: 828px;" %)Reset to factory default
... ... @@ -205,10 +205,10 @@
205 205  Please set the parameters or reset Device to apply change
206 206  )))
207 207  
208 -{{info}}
209 -**Downlink Command: 0x04**
210 -{{/info}}
211 211  
211 +(% style="color:blue" %)**Downlink Command: 0x04**
212 +
213 +
212 212  (((
213 213  Format: Command Code (0x04) followed by FE.
214 214  )))
... ... @@ -222,10 +222,10 @@
222 222  
223 223  Feature: Show firmware version. No downlink command yet.
224 224  
225 -{{info}}
226 -**AT Command: AT+VER**
227 -{{/info}}
228 228  
228 +(% style="color:blue" %)**AT Command: AT+VER**
229 +
230 +
229 229  (% border="1" style="background-color:#ffffcc; color:green; width:586px" %)
230 230  |=(% colspan="3" style="width: 583px;" %)AT+VER: Image Version and Frequency Band
231 231  |(% style="width:170px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:113px" %)**Response**
... ... @@ -235,10 +235,10 @@
235 235  OK
236 236  )))
237 237  
238 -{{info}}
239 -**Downlink Command: 0x26 (Valid in 006 stack)**
240 -{{/info}}
241 241  
241 +(% style="color:blue" %)**Downlink Command: 0x26 (Valid in 006 stack)**
242 +
243 +
242 242  (((
243 243  Downlink Format: 0x26
244 244  )))
... ... @@ -281,10 +281,10 @@
281 281  
282 282  Feature: Show All configure. No downlink command yet.
283 283  
284 -{{info}}
285 -**AT Command: AT+CFG**
286 -{{/info}}
287 287  
287 +(% style="color:blue" %)**AT Command: AT+CFG**
288 +
289 +
288 288  (% border="1" style="background-color:#ffffcc; color:green; width:599.222px" %)
289 289  |=(% colspan="3" style="width: 596px;" %)AT+CFG: Print all configurations
290 290  |(% style="width:160px" %)**Command Example**|(% style="width:154px" %)**Function**|(% style="width:280px" %)**Response**
... ... @@ -302,8 +302,6 @@
302 302  OK
303 303  )))
304 304  
305 -
306 -
307 307  = 5. Keys, IDs and EUIs management =
308 308  
309 309  == 5.1 Application EUI ==
... ... @@ -310,10 +310,10 @@
310 310  
311 311  Feature: Get or Set the Application EUI.
312 312  
313 -{{info}}
314 -**AT Command: AT+APPEUI**
315 -{{/info}}
316 316  
314 +(% style="color:blue" %)**AT Command: AT+APPEUI**
315 +
316 +
317 317  (% border="1" style="background-color:#ffffcc; color:green; width:686.222px" %)
318 318  |=(% colspan="3" style="width: 683px;" %)AT+APPEUI
319 319  |(% style="width:305px" %)**Command Example**|(% style="width:186px" %)**Function**|(% style="width:191px" %)**Response**
... ... @@ -322,16 +322,14 @@
322 322  )))
323 323  |(% style="width:305px" %)AT+APPEUI=00 b3 d5 7e f0 00 4d 34|(% style="width:186px" %)Set the Application EUI|(% style="width:191px" %)OK
324 324  
325 -
326 -
327 327  == 5.2 Application Key ==
328 328  
329 329  Feature: Get or Set the Application Key.
330 330  
331 -{{info}}
332 -**AT Command: AT+APPKEY**
333 -{{/info}}
334 334  
330 +(% style="color:blue" %)**AT Command: AT+APPKEY**
331 +
332 +
335 335  (% border="1" style="background-color:#ffffcc; color:green; width:976.222px" %)
336 336  |=(% colspan="3" style="width: 973px;" %)AT+APPKEY
337 337  |(% style="width:441px" %)**Command Example**|(% style="width:180px" %)**Function**|(% style="width:350px" %)**Response**
... ... @@ -340,16 +340,14 @@
340 340  )))
341 341  |(% style="width:441px" %)AT+APPKEY=00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35|(% style="width:180px" %)Set the Application Key|(% style="width:350px" %)OK
342 342  
343 -
344 -
345 345  == 5.3 Application Session Key ==
346 346  
347 347  Feature: Get or Set the Application Session Key.
348 348  
349 -{{info}}
350 -**AT Command: AT+APPSKEY**
351 -{{/info}}
352 352  
346 +(% style="color:blue" %)**AT Command: AT+APPSKEY**
347 +
348 +
353 353  (% border="1" style="background-color:#ffffcc; color:green; width:1040.22px" %)
354 354  |=(% colspan="3" style="width: 1037px;" %)AT+APPSKEY
355 355  |(% style="width:451px" %)**Command Example**|(% style="width:231px" %)**Function**|(% style="width:354px" %)**Response**
... ... @@ -360,16 +360,14 @@
360 360  OK
361 361  )))
362 362  
363 -
364 -
365 365  == 5.4 Device Address ==
366 366  
367 367  Feature: Get or Set the Device Address.
368 368  
369 -{{info}}
370 -**AT Command: AT+DADDR**
371 -{{/info}}
372 372  
364 +(% style="color:blue" %)**AT Command: AT+DADDR**
365 +
366 +
373 373  (% border="1" style="background-color:#ffffcc; color:green; width:795.222px" %)
374 374  |=(% colspan="3" style="width: 792px;" %)AT+DADDR
375 375  |(% style="width:192px" %)**Command Example**|(% style="width:241px" %)**Function**|(% style="width:359px" %)**Response**
... ... @@ -380,16 +380,14 @@
380 380  )))
381 381  |(% style="width:192px" %)AT+DADDR=A8 40 41 FF|(% style="width:241px" %)Set the Application Session Key.|(% style="width:359px" %)OK
382 382  
383 -
384 -
385 385  == 5.5 Device EUI ==
386 386  
387 387  Feature: Get or Set the Device EUI.
388 388  
389 -{{info}}
390 -**AT Command: AT+DEUI**
391 -{{/info}}
392 392  
382 +(% style="color:blue" %)**AT Command: AT+DEUI**
383 +
384 +
393 393  (% border="1" style="background-color:#ffffcc; color:green; width:1035.22px" %)
394 394  |=(% colspan="3" style="width: 1032px;" %)AT+DEUI
395 395  |(% style="width:250px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:634px" %)**Response**
... ... @@ -400,16 +400,14 @@
400 400  OK
401 401  )))
402 402  
403 -
404 -
405 405  == 5.6 Network ID ==
406 406  
407 407  Feature: Get or Set the Network ID.(You can enter this command change only after successful network connection)
408 408  
409 -{{info}}
410 -**AT Command: AT+NWKID**
411 -{{/info}}
412 412  
400 +(% style="color:blue" %)**AT Command: AT+NWKID**
401 +
402 +
413 413  (% border="1" style="background-color:#ffffcc; color:green; width:448.222px" %)
414 414  |=(% colspan="3" style="width: 445px;" %)AT+NWKID
415 415  |(% style="width:191px" %)**Command Example**|(% style="width:153px" %)**Function**|(% style="width:101px" %)**Response**
... ... @@ -418,16 +418,14 @@
418 418  )))
419 419  |(% style="width:191px" %)AT+NWKID=A8 40 41 FF|(% style="width:153px" %)Set the Network ID.|(% style="width:101px" %)OK
420 420  
421 -
422 -
423 423  == 5.7 Network Session Key ==
424 424  
425 425  Feature: Get or Set the Network Session Key
426 426  
427 -{{info}}
428 -**AT Command: AT+NWKSKEY**
429 -{{/info}}
430 430  
416 +(% style="color:blue" %)**AT Command: AT+NWKSKEY**
417 +
418 +
431 431  (% border="1" style="background-color:#ffffcc; color:green; width:1017.22px" %)
432 432  |=(% colspan="3" style="width: 1014px;" %)AT+NWKSKEY
433 433  |(% style="width:455px" %)**Command Example**|(% style="width:215px" %)**Function**|(% style="width:343px" %)**Response**
... ... @@ -440,12 +440,14 @@
440 440  
441 441  == 6.1 Confirm Mode ==
442 442  
431 +=== AT+CFM command before DR-LWS007 software stack ===
432 +
443 443  Feature: Get or Set the confirmation mode (0-1).
444 444  
445 -{{info}}
446 -**AT Command: AT+CFM**
447 -{{/info}}
448 448  
436 +(% style="color:blue" %)**AT Command: AT+CFM**
437 +
438 +
449 449  (% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
450 450  |=(% colspan="3" style="width: 707px;" %)AT+CFM
451 451  |(% style="width:155px" %)**Command Example**|(% style="width:205px" %)**Function**|(% style="width:346px" %)**Response**
... ... @@ -455,7 +455,7 @@
455 455  |(% style="width:155px" %)AT+CFM=1|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)OK
456 456  |(% style="width:155px" %)AT+CFM=2|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)While Error in format, return AT_PARAM_ERROR
457 457  
458 -Downlink Command: 0x05
448 +(% style="color:blue" %)**Downlink Command: 0x05**
459 459  
460 460  Format: Command Code (0x05) followed by 2 bytes mode value.
461 461  
... ... @@ -464,14 +464,62 @@
464 464  * Example 1: Downlink Payload: 0501 ~/~/ Set AT+CFM=1
465 465  * Example 2: Downlink Payload: 0500 ~/~/ Set AT+CFM=0
466 466  
457 +=== AT+CFM command since DR-LWS007 software stack ===
458 +
459 +
460 +(% style="color:blue" %)**AT Command: AT+CFM**
461 +
462 +
463 +(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
464 +|=(% colspan="3" style="width: 707px;" %)AT+CFM
465 +|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
466 +|(% style="width:160px" %)(((
467 +AT+CFM=1,0,0
468 +
469 +value1
470 +)))|(% style="width:198px" %)confirmed uplink|(% style="width:349px" %)(((
471 +1
472 +
473 +OK
474 +)))
475 +|(% style="width:160px" %)(((
476 +AT+CFM=0,?,0
477 +
478 +value2
479 +)))|(% style="width:198px" %)set max retry , range: 0 ~~ 7|(% style="width:349px" %)(((
480 +0~~7
481 +
482 +OK
483 +)))
484 +|(% style="width:160px" %)(((
485 +AT+CFM=0,0,1
486 +
487 +value3
488 +)))|(% style="width:198px" %)uplink fcnt increase by 1 for each retry|(% style="width:349px" %)(((
489 +1
490 +
491 +OK
492 +)))
493 +
494 +
495 +(% style="color:blue" %)**Downlink Command: 0x05**
496 +
497 +
498 +Format: Command Code (0x05) followed by 2 bytes mode value.
499 +
500 +If the downlink payload=05010101, it means set end node to use confirm mode, while type code is 05.
501 +
502 +* Example 1: Downlink Payload: 05010101 ~/~/ Set AT+CFM=1,1,1
503 +* Example 2: Downlink Payload: 05000700 ~/~/ Set AT+CFM=0,7,0
504 +
467 467  == 6.2 Confirm Status ==
468 468  
469 469  Feature: Get confirmation status of the last AT+SEND (0-1).
470 470  
471 -{{info}}
472 -**AT Command: AT+CFS**
473 -{{/info}}
474 474  
510 +(% style="color:blue" %)**AT Command: AT+CFS**
511 +
512 +
475 475  (% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
476 476  |=(% colspan="3" style="width: 531px;" %)AT+CFS
477 477  |(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:178px" %)**Response**
... ... @@ -483,10 +483,10 @@
483 483  
484 484  Feature: Join network.
485 485  
486 -{{info}}
487 -**AT Command: AT+JOIN**
488 -{{/info}}
489 489  
525 +(% style="color:blue" %)**AT Command: AT+JOIN**
526 +
527 +
490 490  (% border="1" style="background-color:#ffffcc; color:green; width:647.222px" %)
491 491  |=(% colspan="3" style="width: 644px;" %)AT+JOIN
492 492  |(% style="width:163px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:334px" %)**Response**
... ... @@ -500,10 +500,10 @@
500 500  
501 501  Feature: Get or Set the Network Join Mode. (0: ABP, 1: OTAA).
502 502  
503 -{{info}}
504 -**AT Command: AT+NJM**
505 -{{/info}}
506 506  
542 +(% style="color:blue" %)**AT Command: AT+NJM**
543 +
544 +
507 507  (% border="1" style="background-color:#ffffcc; color:green; width:753.222px" %)
508 508  |=(% colspan="3" style="width: 750px;" %)AT+NJM
509 509  |(% style="width:162px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:361px" %)**Response**
... ... @@ -513,15 +513,15 @@
513 513  |(% style="width:162px" %)AT+NJM=0|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)OK
514 514  |(% style="width:162px" %)AT+NJM=2|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)While Error in format, return AT_PARAM_ERROR
515 515  
516 -{{info}}
517 -**Downlink Command: 0x20**
518 -{{/info}}
519 519  
555 +(% style="color:blue" %)**Downlink Command: 0x20**
556 +
557 +
520 520  Format: Command Code (0x20) followed by 1 bytes mode value.
521 521  
522 522  If the downlink payload=2000, it means set the Network Join Mode, while type code is 20.
523 523  
524 -* **Example 1: **Downlink Payload: **2000** ~/~/ Set AT+NJM=O
562 +* **Example 1: **Downlink Payload: **2000** ~/~/ Set AT+NJM=0
525 525  * **Example 2:** Downlink Payload: **2001** ~/~/ Set AT+NJM=1
526 526  
527 527  == 6.5 LoRa® Network Join Status ==
... ... @@ -528,10 +528,10 @@
528 528  
529 529  Feature: LoRa® Network Join Status.
530 530  
531 -{{info}}
532 -**AT Command: AT+NJS**
533 -{{/info}}
534 534  
570 +(% style="color:blue" %)**AT Command: AT+NJS**
571 +
572 +
535 535  (% border="1" style="background-color:#ffffcc; color:green; width:498.222px" %)
536 536  |=(% colspan="3" style="width: 495px;" %)AT+NJS
537 537  |(% style="width:169px" %)**Command Example**|(% style="width:164px" %)**Function**|(% style="width:161px" %)**Response**
... ... @@ -543,10 +543,10 @@
543 543  
544 544  Feature: Print Last Received Data in Raw Format<port:data>.
545 545  
546 -{{info}}
547 -**AT Command: AT+RECV**
548 -{{/info}}
549 549  
585 +(% style="color:blue" %)**AT Command: AT+RECV**
586 +
587 +
550 550  (% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
551 551  |=(% colspan="3" style="width: 584px;" %)AT+RECV
552 552  |(% style="width:161px" %)**Command Example**|(% style="width:272px" %)**Function**|(% style="width:150px" %)**Response**
... ... @@ -558,10 +558,10 @@
558 558  
559 559  Feature: Print Last Received Data in Binary Format<port:data>.
560 560  
561 -{{info}}
562 -**AT Command: AT+RECVB**
563 -{{/info}}
564 564  
600 +(% style="color:blue" %)**AT Command: AT+RECVB**
601 +
602 +
565 565  (% border="1" style="background-color:#ffffcc; color:green; width:793.222px" %)
566 566  |=(% colspan="3" style="width: 790px;" %)AT+RECVB
567 567  |(% style="width:173px" %)**Command Example**|(% style="width:497px" %)**Function**|(% style="width:120px" %)**Response**
... ... @@ -573,10 +573,10 @@
573 573  
574 574  Feature: Send Text Data<port:data>.
575 575  
576 -{{info}}
577 -**AT Command: AT+SEND**
578 -{{/info}}
579 579  
615 +(% style="color:blue" %)**AT Command: AT+SEND**
616 +
617 +
580 580  (% border="1" style="background-color:#ffffcc; color:green; width:991.222px" %)
581 581  |=(% colspan="3" style="width: 988px;" %)AT+SEND
582 582  |(% style="width:201px" %)**Command Example**|(% style="width:340px" %)**Function**|(% style="width:446px" %)**Response**
... ... @@ -592,10 +592,10 @@
592 592  
593 593  Feature: Send hexadecimal data along with the application port.
594 594  
595 -{{info}}
596 -**AT Command: AT+SENDB**
597 -{{/info}}
598 598  
634 +(% style="color:blue" %)**AT Command: AT+SENDB**
635 +
636 +
599 599  (% border="1" style="background-color:#ffffcc; color:green; width:1120.22px" %)
600 600  |=(% colspan="3" style="width: 1117px;" %)AT+SENDB
601 601  |(% style="width:257px" %)**Command Example**|(% style="width:406px" %)**Function**|(% style="width:453px" %)**Response**
... ... @@ -612,10 +612,10 @@
612 612  
613 613  Feature: Get or Set the Adaptive Data Rate setting. (0: off, 1: on).
614 614  
615 -{{info}}
616 -**AT Command: AT+ADR**
617 -{{/info}}
618 618  
654 +(% style="color:blue" %)**AT Command: AT+ADR**
655 +
656 +
619 619  (% border="1" style="background-color:#ffffcc; color:green; width:683.222px" %)
620 620  |=(% colspan="3" style="width: 680px;" %)AT+ADR
621 621  |(% style="width:162px" %)**Command Example**|(% style="width:266px" %)**Function**|(% style="width:250px" %)**Response**
... ... @@ -627,11 +627,11 @@
627 627  AT_PARAM_ERROR
628 628  )))
629 629  
630 -{{info}}
631 -**Downlink Command: 0x22**
632 -{{/info}}
633 633  
669 +(% style="color:blue" %)**Downlink Command: 0x22**
634 634  
671 +
672 +
635 635  If the downlink payload=2201, it means setting the adaptive data rate to 1, while type code is 22.
636 636  
637 637  * **Example 1**: Downlink Payload: **2201** ~/~/ Set AT+ADR=1.
... ... @@ -641,10 +641,10 @@
641 641  
642 642  Feature: Get or Set the Device Class(Currently only support class A, class C).
643 643  
644 -{{info}}
645 -**AT Command:AT+CLASS**
646 -{{/info}}
647 647  
683 +(% style="color:blue" %)**AT Command:AT+CLASS**
684 +
685 +
648 648  (% border="1" style="background-color:#ffffcc; color:green; width:507.222px" %)
649 649  |=(% colspan="3" style="width: 504px;" %)AT+CLASS
650 650  |(% style="width:163px" %)**Command Example**|(% style="width:166px" %)**Function**|(% style="width:175px" %)**Response**
... ... @@ -659,10 +659,10 @@
659 659  
660 660  Feature: Get or Set the ETSI Duty Cycle setting - 0=disable, 1=enable - Only for testing.
661 661  
662 -{{info}}
663 -**AT Command:AT+DCS**
664 -{{/info}}
665 665  
701 +(% style="color:blue" %)**AT Command:AT+DCS**
702 +
703 +
666 666  (% border="1" style="background-color:#ffffcc; color:green; width:515.222px" %)
667 667  |=(% colspan="3" style="width: 512px;" %)AT+DCS
668 668  |(% style="width:165px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:107px" %)**Response**
... ... @@ -677,10 +677,10 @@
677 677  
678 678  Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) . Note: while set Data Rate, please use set Adptive Data Rate, ADR=0 first. otherwise device will response to server's ADR command and change the DR to the setting from server
679 679  
680 -{{info}}
681 -**AT Command: AT+DR**
682 -{{/info}}
683 683  
719 +(% style="color:blue" %)**AT Command: AT+DR**
720 +
721 +
684 684  (% border="1" style="background-color:#ffffcc; color:green; width:466.222px" %)
685 685  |=(% colspan="3" style="width: 463px;" %)AT+DR
686 686  |(% style="width:156px" %)**Command Example**|(% style="width:167px" %)**Function**|(% style="width:140px" %)**Response**
... ... @@ -691,11 +691,11 @@
691 691  
692 692  )))
693 693  
694 -{{info}}
695 -**Downlink Command: 0x2200aaFF**
696 -{{/info}}
697 697  
733 +(% style="color:blue" %)**Downlink Command: 0x2200aaFF**
698 698  
735 +
736 +
699 699  If the downlink payload=220001FF, it means setting the data rate to 1, while type code is 22 00 aa FF.
700 700  
701 701  * **Example 1**: Downlink Payload: **220001FF** ~/~/ Set AT+DR=1.
... ... @@ -705,10 +705,10 @@
705 705  
706 706  Feature: Get or Set the Frame Counter Downlink.
707 707  
708 -{{info}}
709 -**AT Command:AT+FCD**
710 -{{/info}}
711 711  
747 +(% style="color:blue" %)**AT Command:AT+FCD**
748 +
749 +
712 712  (% border="1" style="background-color:#ffffcc; color:green; width:693.222px" %)
713 713  |=(% colspan="3" style="width: 690px;" %)AT+FCD
714 714  |(% style="width:162px" %)**Command Example**|(% style="width:258px" %)**Function**|(% style="width:269px" %)**Response**
... ... @@ -725,10 +725,10 @@
725 725  
726 726  Feature: Get or Set the Frame Counter Uplink.
727 727  
728 -{{info}}
729 -**AT Command:AT+FCU**
730 -{{/info}}
731 731  
767 +(% style="color:blue" %)**AT Command:AT+FCU**
768 +
769 +
732 732  (% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
733 733  |=(% colspan="3" style="width: 531px;" %)AT+FCU
734 734  |(% style="width:177px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:113px" %)**Response**
... ... @@ -743,10 +743,10 @@
743 743  
744 744  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 1 in ms.
745 745  
746 -{{info}}
747 -**AT Command:AT+JN1DL**
748 -{{/info}}
749 749  
785 +(% style="color:blue" %)**AT Command:AT+JN1DL**
786 +
787 +
750 750  (% border="1" style="background-color:#ffffcc; color:green; width:537.222px" %)
751 751  |=(% colspan="3" style="width: 534px;" %)AT+JN1DL
752 752  |(% style="width:164px" %)**Command Example**|(% style="width:229px" %)**Function**|(% style="width:140px" %)**Response**
... ... @@ -761,10 +761,10 @@
761 761  
762 762  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 2 in ms.
763 763  
764 -{{info}}
765 -**AT Command:AT+JN2DL**
766 -{{/info}}
767 767  
803 +(% style="color:blue" %)**AT Command:AT+JN2DL**
804 +
805 +
768 768  (% border="1" style="background-color:#ffffcc; color:green; width:538.222px" %)
769 769  |=(% colspan="3" style="width: 535px;" %)AT+JN2DL
770 770  |(% style="width:160px" %)**Command Example**|(% style="width:228px" %)**Function**|(% style="width:146px" %)**Response**
... ... @@ -777,12 +777,14 @@
777 777  
778 778  == 7.9 Public Network Mode ==
779 779  
780 -Feature: Get or Set the public network mode. (0: off, 1: on)
818 +Feature: Get or Set the public network mode. (0: off, 1: on). A Public LoRaWAN network use 0x34 as syncword. Default Settings; PNM=1
781 781  
782 -{{info}}
783 -**AT Command:AT+PNM**
784 -{{/info}}
820 +Notice: If user build their own LoRaWAN server but still use syncword=0x34, this is still considered a public LoRaWAN network
785 785  
822 +
823 +(% style="color:blue" %)**AT Command:AT+PNM**
824 +
825 +
786 786  (% border="1" style="background-color:#ffffcc; color:green; width:667.222px" %)
787 787  |=(% colspan="3" style="width: 664px;" %)AT+PNM
788 788  |(% style="width:166px" %)**Command Example**|(% style="width:225px" %)**Function**|(% style="width:272px" %)**Response**
... ... @@ -789,20 +789,25 @@
789 789  |(% style="width:166px" %)AT+PNM=?|(% style="width:225px" %)Get the public network mode.|(% style="width:272px" %)1(((
790 790  OK
791 791  )))
792 -|(% style="width:166px" %)AT+PNM=1|(% style="width:225px" %)Set the public network mode.|(% style="width:272px" %)(System will write new value to PNM)(((
832 +|(% style="width:166px" %)AT+PNM=1|(% style="width:225px" %)(((
833 +Set the public network mode.
834 +
835 +Set syncword=0x34
836 +)))|(% style="width:272px" %)(System will write new value to PNM)(((
793 793  OK
794 794  
795 795  
796 796  )))
841 +|(% style="width:166px" %)AT+PNM=0|(% style="width:225px" %)Set to use private network autoset syncword=0x12|(% style="width:272px" %)
797 797  
798 798  == 7.10 Receive Delay1 ==
799 799  
800 800  Feature: Get or Set the delay between the end of the Tx and the Rx Window 1 in ms
801 801  
802 -{{info}}
803 -**AT Command:AT+RX1DL**
804 -{{/info}}
805 805  
848 +(% style="color:blue" %)**AT Command:AT+RX1DL**
849 +
850 +
806 806  (% border="1" style="background-color:#ffffcc; color:green; width:408.222px" %)
807 807  |=(% colspan="3" style="width: 405px;" %)AT+RX1DL
808 808  |(% style="width:155px" %)**Command Example**|(% style="width:128px" %)**Function**|(% style="width:122px" %)**Response**
... ... @@ -817,10 +817,10 @@
817 817  
818 818  Feature: Get or Set the delay between the end of the Tx and the Rx Window 2 in ms
819 819  
820 -{{info}}
821 -**AT Command:AT+RX2DL**
822 -{{/info}}
823 823  
866 +(% style="color:blue" %)**AT Command:AT+RX2DL**
867 +
868 +
824 824  (% border="1" style="background-color:#ffffcc; color:green; width:481.222px" %)
825 825  |=(% colspan="3" style="width: 478px;" %)AT+RX2DL
826 826  |(% style="width:175px" %)**Command Example**|(% style="width:152px" %)**Function**|(% style="width:150px" %)**Response**
... ... @@ -835,10 +835,10 @@
835 835  
836 836  Feature: Get or Set the Rx2 window data rate (0-7 corresponding to DR_X)
837 837  
838 -{{info}}
839 -**AT Command:AT+RX2DR**
840 -{{/info}}
841 841  
884 +(% style="color:blue" %)**AT Command:AT+RX2DR**
885 +
886 +
842 842  (% border="1" style="background-color:#ffffcc; color:green; width:525.222px" %)
843 843  |=(% colspan="3" style="width: 522px;" %)AT+RX2DR
844 844  |(% style="width:160px" %)**Command Example**|(% style="width:232px" %)**Function**|(% style="width:130px" %)**Response**
... ... @@ -853,10 +853,10 @@
853 853  
854 854  Feature: Get or Set the Rx2 window frequency
855 855  
856 -{{info}}
857 -**AT Command:AT+RX2FQ**
858 -{{/info}}
859 859  
902 +(% style="color:blue" %)**AT Command:AT+RX2FQ**
903 +
904 +
860 860  (% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
861 861  |=(% colspan="3" style="width: 584px;" %)AT+RX2FQ
862 862  |(% style="width:183px" %)**Command Example**|(% style="width:240px" %)**Function**|(% style="width:160px" %)**Response**
... ... @@ -871,10 +871,10 @@
871 871  
872 872  Feature: Get or Set the Transmit Power(0-5, MAX:0, MIN:5, according to LoRaWAN Spec, or 40=10dB, 41 = 11dB, …, 50 = 20dB which is out of LoRaWAN spec. )
873 873  
874 -{{info}}
875 -**AT Command:AT+TXP**
876 -{{/info}}
877 877  
920 +(% style="color:blue" %)**AT Command:AT+TXP**
921 +
922 +
878 878  (% border="1" style="background-color:#ffffcc; color:green; width:465.222px" %)
879 879  |=(% colspan="3" style="width: 462px;" %)AT+TXP
880 880  |(% style="width:161px" %)**Command Example**|(% style="width:189px" %)**Function**|(% style="width:112px" %)**Response**
... ... @@ -896,10 +896,10 @@
896 896  
897 897  Feature: Get or Set the Rx2 window frequency
898 898  
899 -{{info}}
900 -**AT Command:AT+RSSI**
901 -{{/info}}
902 902  
945 +(% style="color:blue" %)**AT Command:AT+RSSI**
946 +
947 +
903 903  (% border="1" style="background-color:#ffffcc; color:green; width:557.222px" %)
904 904  |=(% colspan="3" style="width: 554px;" %)AT+RSSI
905 905  |(% style="width:164px" %)**Command Example**|(% style="width:289px" %)**Function**|(% style="width:100px" %)**Response**
... ... @@ -1106,6 +1106,129 @@
1106 1106  * **Example 1**: Downlink Payload: **2101** ~/~/ set packet receiving response level to 1
1107 1107  * **Example 2**: Downlink Payload: **2102** ~/~/ set packet receiving response level to 2
1108 1108  
1154 +== 7.24 Controls NBTrans in unconfirmed uplink mode（LWS007 NBTrans:Set retransmission packets) ==
1155 +
1156 +{{info}}
1157 +**AT Command: AT+SETMAXNBTRANS **
1158 +{{/info}}
1159 +
1160 +(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1161 +|=(% colspan="3" style="width: 533px;" %)AT+**SETMAXNBTRANS**
1162 +|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1163 +|(% style="width:160px" %)**AT+SETMAXNBTRANS=1，0**|(% style="width:263px" %)Value1: set the maximum NBTrans.|(% style="width:109px" %)1(((
1164 +OK
1165 +)))
1166 +|(% style="width:160px" %)**AT+SETMAXNBTRANS=？，1**|(% style="width:263px" %)value2: 0: uplink fcnt doesn't change for each NBTrans; 1: uplink fcnt increase by 1 for each NBTrans.|(% style="width:109px" %)(((
1167 +1
1168 +
1169 +OK
1170 +)))
1171 +
1172 +{{info}}
1173 +**Downlink Command: 0x33**
1174 +{{/info}}
1175 +
1176 +Format: Command Code (0x33) followed by 2 bytes mode value.
1177 +
1178 +If the downlink payload=330100, it means set end node to use confirm mode, while type code is 33.
1179 +
1180 +* Example 1: Downlink Payload: 330100 ~/~/ Set AT+SETMAXNBTRANS=1,0
1181 +* Example 2: Downlink Payload: 330201 ~/~/ Set AT+SETMAXNBTRANS=2,1
1182 +
1183 +== 7.25 Device offline rejoining （LWS007) ==
1184 +
1185 +{{info}}
1186 +**AT Command: AT+DDETECT**
1187 +{{/info}}
1188 +
1189 +(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
1190 +|=(% colspan="3" style="width: 707px;" %)AT+**DDETECT**
1191 +|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
1192 +|(% style="width:160px" %)(((
1193 +AT+DDETECT=1,1440,2880
1194 +
1195 +value1
1196 +)))|(% style="width:198px" %)Enable online detect|(% style="width:349px" %)(((
1197 +1
1198 +
1199 +OK
1200 +)))
1201 +|(% style="width:160px" %)(((
1202 +AT+DDETECT=1,?,2880
1203 +
1204 +value2
1205 +)))|(% style="width:198px" %)Online detection packet sending time|(% style="width:349px" %)(((
1206 +
1207 +
1208 +OK
1209 +)))
1210 +|(% style="width:160px" %)(((
1211 +AT+DDETECT=1,1440,？
1212 +
1213 +value3
1214 +)))|(% style="width:198px" %)Process rejoin|(% style="width:349px" %)(((
1215 +
1216 +
1217 +OK
1218 +)))
1219 +
1220 +{{info}}
1221 +**Downlink Command: 0x33**
1222 +{{/info}}
1223 +
1224 +Format: Command Code (0x32) followed by 2 bytes mode value.
1225 +
1226 +If the downlink payload=320105A00B40, it means set end node to use confirm mode, while type code is 33.
1227 +
1228 +* Example 1: Downlink Payload: 320105A00B40 ~/~/ Set AT+DDETECT=1,1440,2880
1229 +
1230 +== 7.26 Request the server to send an ACK ==
1231 +
1232 +{{info}}
1233 +**AT Command: AT+PNACKMD**
1234 +{{/info}}
1235 +
1236 +(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1237 +|=(% colspan="3" style="width: 533px;" %)**AT+PNACKMD**
1238 +|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1239 +|(% style="width:160px" %)**AT+PNACKMD=1**|(% style="width:263px" %)If the node uploads the ACK as confirm, it will request the server to send an ACK. If the server ack is not received, the node will upload the packets that have not received the ACK the next time it receives the ACK|(% style="width:109px" %)1(((
1240 +OK
1241 +)))
1242 +|(% style="width:160px" %)**AT+PNACKMD=0**|(% style="width:263px" %)off request the server to send an ACK|(% style="width:109px" %)(((
1243 +0
1244 +
1245 +OK
1246 +)))
1247 +
1248 +== 7.27 Adjust network rejoining interval ==
1249 +
1250 +{{info}}
1251 +**AT Command: AT+RJTDC**
1252 +{{/info}}
1253 +
1254 +(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
1255 +|=(% colspan="3" style="width: 724px;" %)AT+RJTDC
1256 +|(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
1257 +|(% style="width:165px" %)AT+RJTDC=?|(% style="width:227px" %)Show the ReJoin data transmission interval in min|(% style="width:329px" %)30000(((
1258 +OK
1259 +
1260 +the interval is 30000ms = 30s
1261 +)))
1262 +|(% style="width:165px" %)AT+RJTDC=60000|(% style="width:227px" %)Set the ReJoin data transmission interval in min|(% style="width:329px" %)OK(((
1263 +Set the ReJoin data transmission interval to 60000ms = 60 seconds
1264 +)))
1265 +
1266 +{{info}}
1267 +**Downlink Command: 0x26**
1268 +{{/info}}
1269 +
1270 +Format: Command Code (0x26) followed by 2 bytes mode value.
1271 +
1272 +If the downlink payload=26000A, it means set end node to use confirm mode, while type code is 26.
1273 +
1274 +* Example 1: Downlink Payload: 26000A ~/~/ Set AT+RJTDC=10
1275 +* Example 2: Downlink Payload: 260002 ~/~/ Set AT+RJTDC=2
1276 +
1109 1109  = 8. AT Commands Combination =
1110 1110  
1111 1111  == 8.1 Set a fix RX2DR for downlink window ==
... ... @@ -1124,3 +1124,4 @@
1124 1124  * AT+ADR=0  [[Reference>>||anchor="H7.1AdaptiveDataRate"]]
1125 1125  * AT+DR=5  [[Reference>>||anchor="H7.4DataRate"]]
1126 1126  * AT+TXP=0  [[Reference>>||anchor="H7.14TransmitPower"]]
1295 +~)~)~)

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0