Changes for page End Device AT Commands and Downlink Command
Last modified by kai on 2024/09/06 10:00
Summary
-
Page properties (1 modified, 0 added, 0 removed)
-
Attachments (0 modified, 0 added, 2 removed)
Details
- Page properties
-
- Content
-
... ... @@ -1,9 +1,8 @@ 1 - **Contents：**1 +Contens 2 2 3 3 {{toc/}} 4 4 5 5 6 - 7 7 = 1. Introduction = 8 8 9 9 Dragino LoRaWAN End Node support two types of AT Commands and Downlink Commands: ... ... @@ -11,96 +11,35 @@ 11 11 * **Common Commands:** They should be available for each sensor, such as: change uplink interval, reset device. 12 12 * **Sensor Related Commands:** Only for special sensor, such as control relay, poll RS485 device. 13 13 14 -((( 15 15 **This page shows the common commands since Dragino LoRaWAN stack DR-LWS-005. Make sure the end node support stack higher than DR-LWS-005 before checking this page.** 16 16 17 -))) 18 18 19 19 = 2. How to use AT Commands or Downlink command = 20 20 21 21 * For AT Command , See Devices User Manual for Device. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]] 22 22 * For LoRaWAN Downlink: The gateway transfer downlink command in HEX format. This page shows the HEX format downlink code for each command. but some servers use base64 as downlink code. Below are reference for how to use downlink command: 23 -** Use HEX format to send a downlink: [[TTN v3>>Notes 24 -** Use Base64 format to send a downlink: [[Chirpstack>>Notes 25 -** See use note for more serves [[Servers Note>>doc :Main.WebHome]](IoT LoRaWANServer)20 +** Use HEX format to send a downlink: [[TTN v3>>url:https://wiki.dragino.com/index.php/Notes_for_TTN#Send_Downlink_message]] 21 +** Use Base64 format to send a downlink: [[Chirpstack>>url:https://wiki.dragino.com/index.php/Notes_for_ChirpStack#Downlink]]. 22 +** See use note for more serves [[Servers Note>>url:https://wiki.dragino.com/index.php/Main_Page#Use_Note_for_Server]] 26 26 27 - 28 - 29 29 = 3. Support End Node and firmware version = 30 30 31 -(% border="1" style="background-color:#ffffcc; color:green; width:966px" %) 32 -|=(% colspan="3" style="width: 963px;" %)((( 33 -Dragino STM32 base hardware Firmware / LoRaWAN stack list 34 -))) 35 -|(% style="width:187px" %)((( 36 -**Model** 37 -)))|(% style="width:330px" %)((( 38 -**Description** 39 -)))|(% style="width:445px" %)((( 40 -**Firmware Version <~-~-> Stack Version** 41 -))) 42 -|(% style="width:187px" %)((( 43 -[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]], 44 -)))|(% style="width:330px" %)((( 45 -Open Source Generic LoRaWAN Sensor Node 46 -)))|(% style="width:445px" %)((( 47 -((( 48 -LSN50 v1.6.0 <~-~-> DR-LWS-003; 49 -))) 50 50 51 -((( 52 -((( 27 +(% border="1" style="background-color:#ffffcc; color:green; width:995.222px" %) 28 +|=(% colspan="3" style="width: 992px;" %) Dragino STM32 base hardware Firmware / LoRaWAN stack list 29 +|(% style="width:187px" %)**Model**|(% style="width:349px" %)**Description**|(% style="width:453px" %)**Firmware Version <~-~-> Stack Version** 30 +|(% style="width:187px" %)[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],|(% style="width:349px" %)Open Source Generic LoRaWAN Sensor Node|(% style="width:453px" %)LSN50 v1.6.0 <~-~-> DR-LWS-003;((( 53 53 LSN50 v1.7.0 <~-~-> DR-LWS-005; ~-~-> Support since this version 54 54 ))) 55 -))) 56 -))) 57 -|(% style="width:187px" %)((( 58 -[[LGT92>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/142-lgt-92.html]], 59 -)))|(% style="width:330px" %)((( 60 -LoRaWAN GPS Tracker 61 -)))|(% style="width:445px" %)((( 62 -((( 63 -LGT92 v1.6.3 <~-~-> DR-LWS-003; 64 -))) 65 - 66 -((( 67 -((( 33 +|(% style="width:187px" %)[[LGT92>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/142-lgt-92.html]],|(% style="width:349px" %)LoRaWAN GPS Tracker|(% style="width:453px" %)LGT92 v1.6.3 <~-~-> DR-LWS-003;((( 68 68 LGT92 v1.6.4 <~-~-> DR-LWS-005;~-~-> Support since this version 69 69 ))) 70 -))) 71 -))) 72 -|(% style="width:187px" %)((( 73 -[[LBT1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/165-lbt1.html]], 74 -)))|(% style="width:330px" %)((( 75 -LoRaWAN BLE Indoor Tracker 76 -)))|(% style="width:445px" %)((( 77 -LBT1 v1.0 <~-~-> DR-LWS-005; 78 -))) 79 -|(% style="width:187px" %)((( 80 -[[RS485-LN>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/154-rs485-ln.html]], 81 -)))|(% style="width:330px" %)((( 82 -LoRaWAN RS485 Modbus Converter 83 -)))|(% style="width:445px" %)((( 84 -RS485-LN v1.3 <~-~-> DR-LWS-005; 85 -))) 86 -|(% style="width:187px" %)((( 87 -[[LHT65>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/151-lht65.html]], 88 -)))|(% style="width:330px" %)((( 89 -LoRaWAN Temperature & Humidity Sensor 90 -)))|(% style="width:445px" %)((( 91 -((( 92 -LHT65 v1.7 <~-~-> DR-LWS-003; 93 -))) 94 - 95 -((( 96 -((( 36 +|(% style="width:187px" %)[[LBT1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/165-lbt1.html]],|(% style="width:349px" %)LoRaWAN BLE Indoor Tracker|(% style="width:453px" %)LBT1 v1.0 <~-~-> DR-LWS-005; 37 +|(% style="width:187px" %)[[RS485-LN>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/154-rs485-ln.html]],|(% style="width:349px" %)LoRaWAN RS485 Modbus Converter|(% style="width:453px" %)RS485-LN v1.3 <~-~-> DR-LWS-005; 38 +|(% style="width:187px" %)[[LHT65>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/151-lht65.html]],|(% style="width:349px" %)LoRaWAN Temperature & Humidity Sensor|(% style="width:453px" %)LHT65 v1.7 <~-~-> DR-LWS-003;((( 97 97 LHT65 v1.8.0 <~-~-> DR-LWS-005;~-~-> Support since this version 98 98 ))) 99 -))) 100 -))) 101 101 102 - 103 - 104 104 = 4. System Management Commands = 105 105 106 106 == 4.1 Change Uplink Interval == ... ... @@ -109,11 +109,11 @@ 109 109 110 110 (% class="box infomessage" %) 111 111 ((( 112 - **AT Command: AT+TDC**50 +AT Command: AT+TDC 113 113 ))) 114 114 115 115 (% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %) 116 -|=(% colspan="3" style="width: 724px;" %)AT+TDC 54 +|=(% colspan="3" style="width: 724px;" %) AT+TDC 117 117 |(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response** 118 118 |(% style="width:165px" %)AT+TDC=?|(% style="width:227px" %)Show current transmit Interval|(% style="width:329px" %)30000((( 119 119 OK ... ... @@ -124,34 +124,27 @@ 124 124 Set transmit interval to 60000ms = 60 seconds 125 125 ))) 126 126 127 -{{info}} 128 128 **Downlink Command: 0x01** 129 -{{/info}} 130 130 131 -((( 132 132 Format: Command Code (0x01) followed by 3 bytes time value. 133 -))) 134 134 135 -((( 136 136 If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01. 137 -))) 138 138 139 139 * **Example 1**: Downlink Payload:** 0100001E** ~/~/ Set Transmit Interval (TDC) = 30 seconds 140 140 * **Example 2**: Downlink Payload:** 0100003C** ~/~/ Set Transmit Interval (TDC) = 60 seconds 141 141 142 - 143 - 144 144 == 4.2 Reboot End Node == 145 145 146 146 Feature: Reboot End Node to perform a new OTAA or ABP Join. 147 147 148 148 {{info}} 149 - **AT Command: ATZ**79 +AT Command: ATZ 150 150 {{/info}} 151 151 152 152 (% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %) 153 -|=(% colspan="3" %)ATZ: Trig a reset of the MCU 83 +|=(% colspan="3" %) ATZ: Trig a reset of the MCU 154 154 |**Command Example**|**Function**|**Response** 85 +~)~)~) 155 155 |ATZ|Reset MCU|((( 156 156 Device reset and show booting info 157 157 ... ... @@ -166,56 +166,35 @@ 166 166 <followed by the Tx and Rx information> 167 167 ))) 168 168 169 -{{info}} 170 -**Downlink Command: 0x04** 171 -{{/info}} 100 +Downlink Command: 0x04 172 172 173 -((( 174 174 Format: Command Code (0x04) followed by FF. 175 -))) 176 176 177 -((( 178 -If the downlink payload=**04FF**, the end node will reboot. 104 +If the downlink payload=04FF, the end node will reboot. 179 179 180 - 181 -))) 182 - 183 183 == 4.3 Reset to factory Default == 184 184 185 185 Feature: Reset the parameters to Factory Default, factory default value depends on the firmware settings, the OTAA and ABP keys will reserve after this command. 186 186 187 -{{info}} 188 -**AT Command: AT+FDR** 189 -{{/info}} 110 +AT Command: AT+FDR 190 190 191 -(% border="1" style="background-color:#ffffcc; color:green; width:831.222px" %) 192 -|=(% colspan="3" style="width: 828px;" %)Reset to factory default 193 -|(% style="width:181px" %)**Command Example**|(% style="width:181px" %)**Function**|(% style="width:465px" %)**Response** 194 -|(% style="width:181px" %)AT+FDR|(% style="width:181px" %)Reset to factory default|(% style="width:465px" %)((( 195 -Device reset to factory default parameters and show booting info 112 +|=(% colspan="3" %)Reset to factory default 113 +|**Command Example**|**Function**|**Response** 114 +|AT+FDR|Reset to factory default|Device reset to factory default parameters and show booting info 196 196 197 -LSN50 Device/LoRa ST Module 198 - 116 +{{{LSN50 Device/LoRa ST Module 199 199 Image Version: XX 200 - 201 201 Frequency Band: XX 202 - 203 203 DevEui= XX XX XX XX XX XX XX XX 204 - 205 205 Please set the parameters or reset Device to apply change 206 - )))121 +}}} 207 207 208 -{{info}} 209 -**Downlink Command: 0x04** 210 -{{/info}} 211 211 212 -((( 124 +Downlink Command: 0x04 125 + 213 213 Format: Command Code (0x04) followed by FE. 214 -))) 215 215 216 -((( 217 -If the downlink payload=**04FE**, Reset Parameters to Factory Default, Keys Reserve. 218 -))) 128 +If the downlink payload=04FE, Reset Parameters to Factory Default, Keys Reserve. 219 219 220 220 221 221 == 4.4 Show Firmware Version == ... ... @@ -222,42 +222,30 @@ 222 222 223 223 Feature: Show firmware version. No downlink command yet. 224 224 225 -{{info}} 226 -**AT Command: AT+VER** 227 -{{/info}} 135 +AT Command: AT+VER 228 228 229 -(% border="1" style="background-color:#ffffcc; color:green; width:586px" %) 230 -|=(% colspan="3" style="width: 583px;" %)AT+VER: Image Version and Frequency Band 231 -|(% style="width:170px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:113px" %)**Response** 232 -|(% style="width:170px" %)AT+VER=?|(% style="width:300px" %)Show Image version and Frequency Band|(% style="width:113px" %)((( 233 -1.3 EU868 137 +|=(% colspan="3" %)AT+VER: Image Version and Frequency Band 138 +|**Command Example**|**Function**|**Response** 139 +|AT+VER=?|Show Image version and Frequency Band| 234 234 141 +{{{1.3 EU868 235 235 OK 236 - )))143 +}}} 237 237 238 -{{info}} 239 -**Downlink Command: 0x26 (Valid in 006 stack)** 240 -{{/info}} 241 241 242 -((( 146 +Downlink Command: 0x26 (Valid in 006 stack) 147 + 243 243 Downlink Format: 0x26 244 -))) 245 245 246 -((( 247 247 Device will reply with firmware version info, device info. frequency band info. detail please check device user manual. Total 5 bytes Example: If device is of firmware version 1.1.0 Upload: xx ~-~- yy ~-~- zz ~-~- 110 total 5 bytes 248 -))) 249 249 250 -((( 251 -**xx: Software Type:** 252 -))) 152 +xx: Software Type: 253 253 254 254 * 0x00 01: LGT92 Version 255 255 * 0x00 02: LBT1 256 256 * 0x00 03: LSE01/LDDS75/LDDS20/LSPH01/LLMS01/LSNPK01 257 257 258 -((( 259 -**yy: Frequency Band:** 260 -))) 158 +yy: Frequency Band: 261 261 262 262 * 0x01: EU868 263 263 * 0x02: US915 ... ... @@ -270,9 +270,7 @@ 270 270 * 0x09: AS923-2 271 271 * 0xa0: AS923-3 272 272 273 -((( 274 -**zz: Subband** 275 -))) 171 +zz: Subband 276 276 277 277 firmware version: v1.1.0 ~-~-> 110 278 278 ... ... @@ -281,29 +281,21 @@ 281 281 282 282 Feature: Show All configure. No downlink command yet. 283 283 284 -{{info}} 285 -**AT Command: AT+CFG** 286 -{{/info}} 180 +AT Command: AT+CFG 287 287 288 -(% border="1" style="background-color:#ffffcc; color:green; width:599.222px" %) 289 -|=(% colspan="3" style="width: 596px;" %)AT+CFG: Print all configurations 290 -|(% style="width:160px" %)**Command Example**|(% style="width:154px" %)**Function**|(% style="width:280px" %)**Response** 291 -|(% style="width:160px" %)AT+CFG|(% style="width:154px" %)Show all configures|(% style="width:280px" %)((( 292 -AT+DEUI = XX XX XX XX XX XX XX XX 182 +|=(% colspan="3" %)AT+CFG: Print all configurations 183 +|**Command Example**|**Function**|**Response** 184 +|AT+CFG|Show all configures| 293 293 186 +{{{AT+DEUI = XX XX XX XX XX XX XX XX 294 294 AT+DADDR=XXXXXXXX 295 - 296 296 ………. 297 - 298 298 AT+RX2WTO=X 299 - 300 300 AT+CHS=868100000 301 - 302 302 OK 303 - )))192 +}}} 304 304 305 305 306 - 307 307 = 5. Keys, IDs and EUIs management = 308 308 309 309 == 5.1 Application EUI == ... ... @@ -310,129 +310,98 @@ 310 310 311 311 Feature: Get or Set the Application EUI. 312 312 313 -{{info}} 314 -**AT Command: AT+APPEUI** 315 -{{/info}} 201 +AT Command: AT+APPEUI 316 316 317 -(% border="1" style="background-color:#ffffcc; color:green; width:686.222px" %) 318 -|=(% colspan="3" style="width: 683px;" %)AT+APPEUI 319 -|(% style="width:305px" %)**Command Example**|(% style="width:186px" %)**Function**|(% style="width:191px" %)**Response** 320 -|(% style="width:305px" %)AT+APPEUI=?|(% style="width:186px" %)Get the Application EUI|(% style="width:191px" %)00 b3 d5 00 00 00 00 00((( 203 +|=(% colspan="3" %)AT+APPEUI 204 +|**Command Example**|**Function**|**Response** 205 +|AT+APPEUI=?|Get the Application EUI|00 b3 d5 00 00 00 00 00((( 321 321 OK 322 322 ))) 323 -| (% style="width:305px" %)AT+APPEUI=00 b3 d5 7e f0 00 4d 34|(% style="width:186px" %)Set the Application EUI|(% style="width:191px" %)OK208 +|AT+APPEUI=00 b3 d5 7e f0 00 4d 34|Set the Application EUI|OK 324 324 325 - 326 - 327 327 == 5.2 Application Key == 328 328 329 329 Feature: Get or Set the Application Key. 330 330 331 -{{info}} 332 -**AT Command: AT+APPKEY** 333 -{{/info}} 214 +AT Command: AT+APPKEY 334 334 335 -(% border="1" style="background-color:#ffffcc; color:green; width:976.222px" %) 336 -|=(% colspan="3" style="width: 973px;" %)AT+APPKEY 337 -|(% style="width:441px" %)**Command Example**|(% style="width:180px" %)**Function**|(% style="width:350px" %)**Response** 338 -|(% style="width:441px" %)AT+APPKEY=?|(% style="width:180px" %)Get the Application Key|(% style="width:350px" %)00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35((( 216 +|=(% colspan="3" %)AT+APPKEY 217 +|**Command Example**|**Function**|**Response** 218 +|AT+APPKEY=?|Get the Application Key|00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35((( 339 339 OK 340 340 ))) 341 -| (% style="width:441px" %)AT+APPKEY=00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35|(% style="width:180px" %)Set the Application Key|(% style="width:350px" %)OK221 +|AT+APPKEY=00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35|Set the Application Key.|OK 342 342 343 - 344 - 345 345 == 5.3 Application Session Key == 346 346 347 347 Feature: Get or Set the Application Session Key. 348 348 349 -{{info}} 350 -**AT Command: AT+APPSKEY** 351 -{{/info}} 227 +AT Command: AT+APPSKEY 352 352 353 -(% border="1" style="background-color:#ffffcc; color:green; width:1040.22px" %) 354 -|=(% colspan="3" style="width: 1037px;" %)AT+APPSKEY 355 -|(% style="width:451px" %)**Command Example**|(% style="width:231px" %)**Function**|(% style="width:354px" %)**Response** 356 -|(% style="width:451px" %)AT+APPSKEY=?|(% style="width:231px" %)Get the Application Session Key|(% style="width:354px" %)00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2((( 229 +|=(% colspan="3" %)AT+APPSKEY 230 +|**Command Example**|**Function**|**Response** 231 +|AT+APPSKEY=?|Get the Application Session Key|00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2((( 357 357 OK 358 358 ))) 359 -| (% style="width:451px" %)AT+APPSKEY=00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2|(% style="width:231px" %)Set the Application Session Key|(% style="width:354px" %)(While Error in format, return AT_PARAM_ERROR)(((234 +|AT+APPSKEY=00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2|Set the Application Session Key.|(While Error in format, return AT_PARAM_ERROR)((( 360 360 OK 361 361 ))) 362 362 363 - 364 - 365 365 == 5.4 Device Address == 366 366 367 367 Feature: Get or Set the Device Address. 368 368 369 -{{info}} 370 -**AT Command: AT+DADDR** 371 -{{/info}} 242 +AT Command: AT+DADDR 372 372 373 -(% border="1" style="background-color:#ffffcc; color:green; width:795.222px" %) 374 -|=(% colspan="3" style="width: 792px;" %)AT+DADDR 375 -|(% style="width:192px" %)**Command Example**|(% style="width:241px" %)**Function**|(% style="width:359px" %)**Response** 376 -|(% style="width:192px" %)AT+DADDR=?|(% style="width:241px" %)Get the Application Session Key.|(% style="width:359px" %)(While Error in format, return AT_PARAM_ERROR)((( 244 +|=(% colspan="3" %)AT+DADDR 245 +|**Command Example**|**Function**|**Response** 246 +|AT+DADDR=?|Get the Application Session Key.|(While Error in format, return AT_PARAM_ERROR)((( 377 377 A8 40 41 FF 378 378 379 379 OK 380 380 ))) 381 -| (% style="width:192px" %)AT+DADDR=A8 40 41 FF|(% style="width:241px" %)Set the Application Session Key.|(% style="width:359px" %)OK251 +|AT+DADDR=A8 40 41 FF|Set the Application Session Key.|OK 382 382 383 - 384 - 385 385 == 5.5 Device EUI == 386 386 387 387 Feature: Get or Set the Device EUI. 388 388 389 -{{info}} 390 -**AT Command: AT+DEUI** 391 -{{/info}} 257 +AT Command: AT+DEUI 392 392 393 -(% border="1" style="background-color:#ffffcc; color:green; width:1035.22px" %) 394 -|=(% colspan="3" style="width: 1032px;" %)AT+DEUI 395 -|(% style="width:250px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:634px" %)**Response** 396 -|(% style="width:250px" %)AT+DEUI=?|(% style="width:147px" %)Get the Device EUI.|(% style="width:634px" %)00 44 34 22 33 45 55 55((( 259 +|=(% colspan="3" %)AT+DEUI 260 +|**Command Example**|**Function**|**Response** 261 +|AT+DEUI=?|Get the Device EUI.|00 44 34 22 33 45 55 55((( 397 397 OK 398 398 ))) 399 -| (% style="width:250px" %)AT+DEUI=A8 40 41 FF FF 12 34 56|(% style="width:147px" %)Set the Device EUI.|(% style="width:634px" %)(System will write new value to Device EUI,While Error in format, return AT_PARAM_ERROR)(((264 +|AT+DEUI=A8 40 41 FF FF 12 34 56|Set the Device EUI.|(System will write new value to Device EUI,While Error in format, return AT_PARAM_ERROR)((( 400 400 OK 401 401 ))) 402 402 403 - 404 - 405 405 == 5.6 Network ID == 406 406 407 407 Feature: Get or Set the Network ID.(You can enter this command change only after successful network connection) 408 408 409 -{{info}} 410 -**AT Command: AT+NWKID** 411 -{{/info}} 272 +AT Command: AT+NWKID 412 412 413 -(% border="1" style="background-color:#ffffcc; color:green; width:448.222px" %) 414 -|=(% colspan="3" style="width: 445px;" %)AT+NWKID 415 -|(% style="width:191px" %)**Command Example**|(% style="width:153px" %)**Function**|(% style="width:101px" %)**Response** 416 -|(% style="width:191px" %)AT+NWKID=?|(% style="width:153px" %)Get the Network ID.|(% style="width:101px" %)a8 40 41 ff((( 274 +|=(% colspan="3" %)AT+NWKID 275 +|**Command Example**|**Function**|**Response** 276 +|AT+NWKID=?|Get the Network ID.|a8 40 41 ff((( 417 417 OK 418 418 ))) 419 -| (% style="width:191px" %)AT+NWKID=A8 40 41 FF|(% style="width:153px" %)Set the Network ID.|(% style="width:101px" %)OK279 +|AT+NWKID=A8 40 41 FF|Set the Network ID.|OK 420 420 421 421 == 5.7 Network Session Key == 422 422 423 423 Feature: Get or Set the Network Session Key 424 424 425 -{{info}} 426 -**AT Command: AT+NWKSKEY** 427 -{{/info}} 285 +AT Command: AT+NWKSKEY 428 428 429 -(% border="1" style="background-color:#ffffcc; color:green; width:1017.22px" %) 430 -|=(% colspan="3" style="width: 1014px;" %)AT+NWKSKEY 431 -|(% style="width:455px" %)**Command Example**|(% style="width:215px" %)**Function**|(% style="width:343px" %)**Response** 432 -|(% style="width:455px" %)AT+NWKSKEY=?|(% style="width:215px" %)Get the Network Session Key.|(% style="width:343px" %)00 4f 19 25 52 ce 97 09 d7 fa 84 71 db 51 02 92((( 287 +|=(% colspan="3" %)AT+NWKSKEY 288 +|**Command Example**|**Function**|**Response** 289 +|AT+NWKSKEY=?|Get the Network Session Key.|00 4f 19 25 52 ce 97 09 d7 fa 84 71 db 51 02 92((( 433 433 OK 434 434 ))) 435 -| (% style="width:455px" %)AT+NWKSKEY=A8 40 41 FF FF 12 34 56 00 01 02 04 05 06 06 07|(% style="width:215px" %)Set the Network Session Key.|(% style="width:343px" %)OK292 +|AT+NWKSKEY=A8 40 41 FF FF 12 34 56 00 01 02 04 05 06 06 07|Set the Network Session Key.|OK 436 436 437 437 = 6. Joining and sending date on LoRaWAN network = 438 438 ... ... @@ -440,18 +440,15 @@ 440 440 441 441 Feature: Get or Set the confirmation mode (0-1). 442 442 443 -{{info}} 444 -**AT Command: AT+CFM** 445 -{{/info}} 300 +AT Command: AT+CFM 446 446 447 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %) 448 -|=(% colspan="3" style="width: 707px;" %)AT+CFM 449 -|(% style="width:155px" %)**Command Example**|(% style="width:205px" %)**Function**|(% style="width:346px" %)**Response** 450 -|(% style="width:155px" %)AT+CFM=?|(% style="width:205px" %)Get the confirmation mode|(% style="width:346px" %)0((( 302 +|=(% colspan="3" %)AT+CFM 303 +|**Command Example**|**Function**|**Response** 304 +|AT+CFM=?|Get the confirmation mode|0((( 451 451 OK 452 452 ))) 453 -| (% style="width:155px" %)AT+CFM=1|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)OK454 -| (% style="width:155px" %)AT+CFM=2|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)While Error in format, return AT_PARAM_ERROR307 +|AT+CFM=1|Set the confirmation mode|OK 308 +|AT+CFM=2|Set the confirmation mode|While Error in format, return AT_PARAM_ERROR 455 455 456 456 Downlink Command: 0x05 457 457 ... ... @@ -466,14 +466,11 @@ 466 466 467 467 Feature: Get confirmation status of the last AT+SEND (0-1). 468 468 469 -{{info}} 470 -**AT Command: AT+CFS** 471 -{{/info}} 323 +AT Command: AT+CFS 472 472 473 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %) 474 -|=(% colspan="3" style="width: 531px;" %)AT+CFS 475 -|(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:178px" %)**Response** 476 -|(% style="width:156px" %)AT+CFS=?|(% style="width:193px" %)Get confirmation status|(% style="width:178px" %)0((( 325 +|=(% colspan="3" %)AT+CFS 326 +|**Command Example**|**Function**|**Response** 327 +|AT+CFS=?|Get confirmation status|0((( 477 477 OK 478 478 ))) 479 479 ... ... @@ -481,14 +481,11 @@ 481 481 482 482 Feature: Join network. 483 483 484 -{{info}} 485 -**AT Command: AT+JOIN** 486 -{{/info}} 335 +AT Command: AT+JOIN 487 487 488 -(% border="1" style="background-color:#ffffcc; color:green; width:647.222px" %) 489 -|=(% colspan="3" style="width: 644px;" %)AT+JOIN 490 -|(% style="width:163px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:334px" %)**Response** 491 -|(% style="width:163px" %)AT+JOIN ?|(% style="width:147px" %)Get imformation.|(% style="width:334px" %)AT+JOIN: Join network((( 337 +|=(% colspan="3" %)AT+JOIN 338 +|**Command Example**|**Function**|**Response** 339 +|AT+JOIN ?|Get imformation.|AT+JOIN: Join network((( 492 492 OK 493 493 494 494 While Error in format, return AT_BUSY_ERROR ... ... @@ -498,42 +498,34 @@ 498 498 499 499 Feature: Get or Set the Network Join Mode. (0: ABP, 1: OTAA). 500 500 501 -{{info}} 502 -**AT Command: AT+NJM** 503 -{{/info}} 349 +AT Command: AT+NJM 504 504 505 -(% border="1" style="background-color:#ffffcc; color:green; width:753.222px" %) 506 -|=(% colspan="3" style="width: 750px;" %)AT+NJM 507 -|(% style="width:162px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:361px" %)**Response** 508 -|(% style="width:162px" %)AT+NJM=?|(% style="width:227px" %)Get the Network Join Mode|(% style="width:361px" %)1((( 351 +|=(% colspan="3" %)AT+NJM 352 +|**Command Example**|**Function**|**Response** 353 +|AT+NJM=?|Get the Network Join Mode|1((( 509 509 OK 510 510 ))) 511 -| (% style="width:162px" %)AT+NJM=0|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)OK512 -| (% style="width:162px" %)AT+NJM=2|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)While Error in format, return AT_PARAM_ERROR356 +|AT+NJM=0|Set the Network Join Mode|OK 357 +|AT+NJM=2|Set the Network Join Mode|While Error in format, return AT_PARAM_ERROR 513 513 514 -{{info}} 515 -**Downlink Command: 0x20** 516 -{{/info}} 359 +Downlink Command: 0x20 517 517 518 518 Format: Command Code (0x20) followed by 1 bytes mode value. 519 519 520 520 If the downlink payload=2000, it means set the Network Join Mode, while type code is 20. 521 521 522 -* **Example 1:**Downlink Payload:**2000**~/~/ Set AT+NJM=O523 -* **Example 2:**Downlink Payload:**2001**~/~/ Set AT+NJM=1365 +* Example 1: Downlink Payload: 2000 ~/~/ Set AT+NJM=O 366 +* Example 2: Downlink Payload: 2001 ~/~/ Set AT+NJM=1 524 524 525 525 == 6.5 LoRa® Network Join Status == 526 526 527 527 Feature: LoRa® Network Join Status. 528 528 529 -{{info}} 530 -**AT Command: AT+NJS** 531 -{{/info}} 372 +AT Command: AT+NJS 532 532 533 -(% border="1" style="background-color:#ffffcc; color:green; width:498.222px" %) 534 -|=(% colspan="3" style="width: 495px;" %)AT+NJS 535 -|(% style="width:169px" %)**Command Example**|(% style="width:164px" %)**Function**|(% style="width:161px" %)**Response** 536 -|(% style="width:169px" %)AT+NJS=?|(% style="width:164px" %)Get the join status.|(% style="width:161px" %)0((( 374 +|=(% colspan="3" %)AT+NJS 375 +|**Command Example**|**Function**|**Response** 376 +|AT+NJS=?|Get the join status.|0((( 537 537 OK 538 538 ))) 539 539 ... ... @@ -541,14 +541,11 @@ 541 541 542 542 Feature: Print Last Received Data in Raw Format<port:data>. 543 543 544 -{{info}} 545 -**AT Command: AT+RECV** 546 -{{/info}} 384 +AT Command: AT+RECV 547 547 548 -(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %) 549 -|=(% colspan="3" style="width: 584px;" %)AT+RECV 550 -|(% style="width:161px" %)**Command Example**|(% style="width:272px" %)**Function**|(% style="width:150px" %)**Response** 551 -|(% style="width:161px" %)AT+RECV=?|(% style="width:272px" %)print last received data in raw format.|(% style="width:150px" %)0:((( 386 +|=(% colspan="3" %)AT+RECV 387 +|**Command Example**|**Function**|**Response** 388 +|AT+RECV=?|print last received data in raw format.|0:((( 552 552 OK 553 553 ))) 554 554 ... ... @@ -556,14 +556,11 @@ 556 556 557 557 Feature: Print Last Received Data in Binary Format<port:data>. 558 558 559 -{{info}} 560 -**AT Command: AT+RECVB** 561 -{{/info}} 396 +AT Command: AT+RECVB 562 562 563 -(% border="1" style="background-color:#ffffcc; color:green; width:793.222px" %) 564 -|=(% colspan="3" style="width: 790px;" %)AT+RECVB 565 -|(% style="width:173px" %)**Command Example**|(% style="width:497px" %)**Function**|(% style="width:120px" %)**Response** 566 -|(% style="width:173px" %)AT+RECVB=?|(% style="width:497px" %)print last received data in binary format (with hexadecimal values).|(% style="width:120px" %)2: 0010((( 398 +|=(% colspan="3" %)AT+RECVB 399 +|**Command Example**|**Function**|**Response** 400 +|AT+RECVB=?|print last received data in binary format (with hexadecimal values).|2: 0010((( 567 567 OK 568 568 ))) 569 569 ... ... @@ -571,14 +571,11 @@ 571 571 572 572 Feature: Send Text Data<port:data>. 573 573 574 -{{info}} 575 -**AT Command: AT+SEND** 576 -{{/info}} 408 +AT Command: AT+SEND 577 577 578 -(% border="1" style="background-color:#ffffcc; color:green; width:991.222px" %) 579 -|=(% colspan="3" style="width: 988px;" %)AT+SEND 580 -|(% style="width:201px" %)**Command Example**|(% style="width:340px" %)**Function**|(% style="width:446px" %)**Response** 581 -|(% style="width:201px" %)AT+SEND=12:hello world|(% style="width:340px" %)Send text data along with the application port.|(% style="width:446px" %)OK((( 410 +|=(% colspan="3" %)AT+SEND 411 +|**Command Example**|**Function**|**Response** 412 +|AT+SEND=12:hello world|Send text data along with the application port.|OK((( 582 582 While Error in format, return 583 583 584 584 AT_BUSY_ERROR/AT_BUSY_ERROR/AT_NO_NETWORK_JOINED ... ... @@ -590,15 +590,12 @@ 590 590 591 591 Feature: Send hexadecimal data along with the application port. 592 592 593 -{{info}} 594 -**AT Command: AT+SENDB** 595 -{{/info}} 424 +AT Command: AT+SENDB 596 596 597 -(% border="1" style="background-color:#ffffcc; color:green; width:1120.22px" %) 598 -|=(% colspan="3" style="width: 1117px;" %)AT+SENDB 599 -|(% style="width:257px" %)**Command Example**|(% style="width:406px" %)**Function**|(% style="width:453px" %)**Response** 600 -|(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)OK 601 -|(% style="width:257px" %)AT+SENDB=abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)While Error in format, return((( 426 +|=(% colspan="3" %)AT+SENDB 427 +|**Command Example**|**Function**|**Response** 428 +|AT+SENDB=12:abcdef0123456789|Send hexadecimal data along with the application port.|OK 429 +|AT+SENDB=abcdef0123456789|Send hexadecimal data along with the application port.|While Error in format, return((( 602 602 AT_PARAM_ERROR AT_BUSY_ERROR/AT_NO_NETWORK_JOINED 603 603 604 604 ... ... @@ -610,46 +610,39 @@ 610 610 611 611 Feature: Get or Set the Adaptive Data Rate setting. (0: off, 1: on). 612 612 613 -{{info}} 614 -**AT Command: AT+ADR** 615 -{{/info}} 616 616 617 -(% border="1" style="background-color:#ffffcc; color:green; width:683.222px" %) 618 -|=(% colspan="3" style="width: 680px;" %)AT+ADR 619 -|(% style="width:162px" %)**Command Example**|(% style="width:266px" %)**Function**|(% style="width:250px" %)**Response** 620 -|(% style="width:162px" %)AT+ADR=?|(% style="width:266px" %)Get the Adaptive Data Rate setting.|(% style="width:250px" %)1((( 442 +AT Command: AT+ADR 443 + 444 +|=(% colspan="3" %)AT+ADR 445 +|**Command Example**|**Function**|**Response** 446 +|AT+ADR=?|Get the Adaptive Data Rate setting.|1((( 621 621 OK 622 622 ))) 623 -| (% style="width:162px" %)AT+ADR=0|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:250px" %)OK624 -| (% style="width:162px" %)AT+ADR=2|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:250px" %)While Error in format, return(((449 +|AT+ADR=0|Set the Adaptive Data Rate setting.|OK 450 +|AT+ADR=2|Set the Adaptive Data Rate setting.|While Error in format, return((( 625 625 AT_PARAM_ERROR 626 626 ))) 627 627 628 -{{info}} 629 -**Downlink Command: 0x22** 630 -{{/info}} 454 +Downlink Command: 0x22 631 631 632 632 633 633 If the downlink payload=2201, it means setting the adaptive data rate to 1, while type code is 22. 634 634 635 -* **Example 1**: Downlink Payload:**2201**~/~/ Set AT+ADR=1.636 -* **Example 2**: Downlink Payload:**2200FFFF**~/~/ Set AT+ADR=0.459 +* Example 1: Downlink Payload: 2201 ~/~/ Set AT+ADR=1. 460 +* Example 2: Downlink Payload: 2200FFFF ~/~/ Set AT+ADR=0. 637 637 638 638 == 7.2 LoRa® Class == 639 639 640 640 Feature: Get or Set the Device Class(Currently only support class A, class C). 641 641 642 -{{info}} 643 -**AT Command:AT+CLASS** 644 -{{/info}} 466 +AT Command:AT+CLASS 645 645 646 -(% border="1" style="background-color:#ffffcc; color:green; width:507.222px" %) 647 -|=(% colspan="3" style="width: 504px;" %)AT+CLASS 648 -|(% style="width:163px" %)**Command Example**|(% style="width:166px" %)**Function**|(% style="width:175px" %)**Response** 649 -|(% style="width:163px" %)AT+CLASS=?|(% style="width:166px" %)Get the Device Class.|(% style="width:175px" %)A((( 468 +|=(% colspan="3" %)AT+CLASS 469 +|**Command Example**|**Function**|**Response** 470 +|AT+CLASS=?|Get the Device Class.|A((( 650 650 OK 651 651 ))) 652 -| (% style="width:163px" %)AT+CLASS=C|(% style="width:166px" %)Set the Device Class.|(% style="width:175px" %)OK(((473 +|AT+CLASS=C|Set the Device Class.|OK((( 653 653 654 654 ))) 655 655 ... ... @@ -657,17 +657,14 @@ 657 657 658 658 Feature: Get or Set the ETSI Duty Cycle setting - 0=disable, 1=enable - Only for testing. 659 659 660 -{{info}} 661 -**AT Command:AT+DCS** 662 -{{/info}} 481 +AT Command:AT+DCS 663 663 664 -(% border="1" style="background-color:#ffffcc; color:green; width:515.222px" %) 665 -|=(% colspan="3" style="width: 512px;" %)AT+DCS 666 -|(% style="width:165px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:107px" %)**Response** 667 -|(% style="width:165px" %)AT+DCS=?|(% style="width:239px" %)Get the ETSI Duty Cycle setting.|(% style="width:107px" %)1((( 483 +|=(% colspan="3" %)AT+DCS 484 +|**Command Example**|**Function**|**Response** 485 +|AT+DCS=?|Get the ETSI Duty Cycle setting.|1((( 668 668 OK 669 669 ))) 670 -| (% style="width:165px" %)AT+DCS=1|(% style="width:239px" %)Set the ETSI Duty Cycle setting.|(% style="width:107px" %)OK(((488 +|AT+DCS=1|Set the ETSI Duty Cycle setting.|OK((( 671 671 672 672 ))) 673 673 ... ... @@ -675,45 +675,37 @@ 675 675 676 676 Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) . Note: while set Data Rate, please use set Adptive Data Rate, ADR=0 first. otherwise device will response to server's ADR command and change the DR to the setting from server 677 677 678 -{{info}} 679 -**AT Command: AT+DR** 680 -{{/info}} 496 +AT Command: AT+DR 681 681 682 -(% border="1" style="background-color:#ffffcc; color:green; width:466.222px" %) 683 -|=(% colspan="3" style="width: 463px;" %)AT+DR 684 -|(% style="width:156px" %)**Command Example**|(% style="width:167px" %)**Function**|(% style="width:140px" %)**Response** 685 -|(% style="width:156px" %)AT+DR=?|(% style="width:167px" %)Get the Data Rate.|(% style="width:140px" %)5((( 498 +|=(% colspan="3" %)AT+DR 499 +|**Command Example**|**Function**|**Response** 500 +|AT+DR=?|Get the Data Rate.|5((( 686 686 OK 687 687 ))) 688 -| (% style="width:156px" %)AT+DR=2|(% style="width:167px" %)Set the Data Rate.|(% style="width:140px" %)OK(((503 +|AT+DR=2|Set the Data Rate.|OK((( 689 689 690 690 ))) 691 691 692 -{{info}} 693 -**Downlink Command: 0x2200aaFF** 694 -{{/info}} 507 +Downlink Command: 0x2200aaFF 695 695 696 696 697 697 If the downlink payload=220001FF, it means setting the data rate to 1, while type code is 22 00 aa FF. 698 698 699 -* **Example 1**: Downlink Payload:**220001FF**~/~/ Set AT+DR=1.700 -* **Example 2**: Downlink Payload:**220000FF**~/~/ Set AT+DR=0.512 +* Example 1: Downlink Payload: 220001FF ~/~/ Set AT+DR=1. 513 +* Example 2: Downlink Payload: 220000FF ~/~/ Set AT+DR=0. 701 701 702 702 == 7.5 Frame Counter Downlink == 703 703 704 704 Feature: Get or Set the Frame Counter Downlink. 705 705 706 -{{info}} 707 -**AT Command:AT+FCD** 708 -{{/info}} 519 +AT Command:AT+FCD 709 709 710 -(% border="1" style="background-color:#ffffcc; color:green; width:693.222px" %) 711 -|=(% colspan="3" style="width: 690px;" %)AT+FCD 712 -|(% style="width:162px" %)**Command Example**|(% style="width:258px" %)**Function**|(% style="width:269px" %)**Response** 713 -|(% style="width:162px" %)AT+FCD=?|(% style="width:258px" %)Get the Frame Counter Downlink.|(% style="width:269px" %)0((( 521 +|=(% colspan="3" %)AT+FCD 522 +|**Command Example**|**Function**|**Response** 523 +|AT+FCD=?|Get the Frame Counter Downlink.|0((( 714 714 OK 715 715 ))) 716 -| (% style="width:162px" %)AT+FCD=10|(% style="width:258px" %)Set the Frame Counter Downlink.|(% style="width:269px" %)(System will write new value to FCD)(((526 +|AT+FCD=10|Set the Frame Counter Downlink.|(System will write new value to FCD)((( 717 717 OK 718 718 719 719 ... ... @@ -723,17 +723,14 @@ 723 723 724 724 Feature: Get or Set the Frame Counter Uplink. 725 725 726 -{{info}} 727 -**AT Command:AT+FCU** 728 -{{/info}} 536 +AT Command:AT+FCU 729 729 730 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %) 731 -|=(% colspan="3" style="width: 531px;" %)AT+FCU 732 -|(% style="width:177px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:113px" %)**Response** 733 -|(% style="width:177px" %)AT+FCU=?|(% style="width:239px" %)Get the Frame Counter Uplink.|(% style="width:113px" %)0((( 538 +|=(% colspan="3" %)AT+FCU 539 +|**Command Example**|**Function**|**Response** 540 +|AT+FCU=?|Get the Frame Counter Uplink.|0((( 734 734 OK 735 735 ))) 736 -| (% style="width:177px" %)AT+FCU=10|(% style="width:239px" %)Set the Frame Counter Uplink.|(% style="width:113px" %)OK(((543 +|AT+FCU=10|Set the Frame Counter Uplink.|OK((( 737 737 738 738 ))) 739 739 ... ... @@ -741,17 +741,14 @@ 741 741 742 742 Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 1 in ms. 743 743 744 -{{info}} 745 -**AT Command:AT+JN1DL** 746 -{{/info}} 551 +AT Command:AT+JN1DL 747 747 748 -(% border="1" style="background-color:#ffffcc; color:green; width:537.222px" %) 749 -|=(% colspan="3" style="width: 534px;" %)AT+JN1DL 750 -|(% style="width:164px" %)**Command Example**|(% style="width:229px" %)**Function**|(% style="width:140px" %)**Response** 751 -|(% style="width:164px" %)AT+JN1DL=?|(% style="width:229px" %)Get the Join Accept Delay.|(% style="width:140px" %)5000((( 553 +|=(% colspan="3" %)AT+JN1DL 554 +|**Command Example**|**Function**|**Response** 555 +|AT+JN1DL=?|Get the Join Accept Delay.|5000((( 752 752 OK 753 753 ))) 754 -| (% style="width:164px" %)AT+JN1DL=10000|(% style="width:229px" %)Set the Join Accept Delay.|(% style="width:140px" %)OK(((558 +|AT+JN1DL=10000|Set the Join Accept Delay.|OK((( 755 755 756 756 ))) 757 757 ... ... @@ -759,17 +759,14 @@ 759 759 760 760 Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 2 in ms. 761 761 762 -{{info}} 763 -**AT Command:AT+JN2DL** 764 -{{/info}} 566 +AT Command:AT+JN2DL 765 765 766 -(% border="1" style="background-color:#ffffcc; color:green; width:538.222px" %) 767 -|=(% colspan="3" style="width: 535px;" %)AT+JN2DL 768 -|(% style="width:160px" %)**Command Example**|(% style="width:228px" %)**Function**|(% style="width:146px" %)**Response** 769 -|(% style="width:160px" %)AT+JN2DL=?|(% style="width:228px" %)Get the Join Accept Delay.|(% style="width:146px" %)6000((( 568 +|=(% colspan="3" %)AT+JN2DL 569 +|**Command Example**|**Function**|**Response** 570 +|AT+JN2DL=?|Get the Join Accept Delay.|6000((( 770 770 OK 771 771 ))) 772 -| (% style="width:160px" %)AT+JN2DL=20000|(% style="width:228px" %)Set the Join Accept Delay.|(% style="width:146px" %)OK(((573 +|AT+JN2DL=20000|Set the Join Accept Delay.|OK((( 773 773 774 774 ))) 775 775 ... ... @@ -777,17 +777,14 @@ 777 777 778 778 Feature: Get or Set the public network mode. (0: off, 1: on) 779 779 780 -{{info}} 781 -**AT Command:AT+PNM** 782 -{{/info}} 581 +AT Command:AT+PNM 783 783 784 -(% border="1" style="background-color:#ffffcc; color:green; width:667.222px" %) 785 -|=(% colspan="3" style="width: 664px;" %)AT+PNM 786 -|(% style="width:166px" %)**Command Example**|(% style="width:225px" %)**Function**|(% style="width:272px" %)**Response** 787 -|(% style="width:166px" %)AT+PNM=?|(% style="width:225px" %)Get the public network mode.|(% style="width:272px" %)1((( 583 +|=(% colspan="3" %)AT+PNM 584 +|**Command Example**|**Function**|**Response** 585 +|AT+PNM=?|Get the public network mode.|1((( 788 788 OK 789 789 ))) 790 -| (% style="width:166px" %)AT+PNM=1|(% style="width:225px" %)Set the public network mode.|(% style="width:272px" %)(System will write new value to PNM)(((588 +|AT+PNM=1|Set the public network mode.|(System will write new value to PNM)((( 791 791 OK 792 792 793 793 ... ... @@ -797,35 +797,29 @@ 797 797 798 798 Feature: Get or Set the delay between the end of the Tx and the Rx Window 1 in ms 799 799 800 -{{info}} 801 -**AT Command:AT+RX1DL** 802 -{{/info}} 598 +AT Command:AT+RX1DL 803 803 804 -(% border="1" style="background-color:#ffffcc; color:green; width:408.222px" %) 805 -|=(% colspan="3" style="width: 405px;" %)AT+RX1DL 806 -|(% style="width:155px" %)**Command Example**|(% style="width:128px" %)**Function**|(% style="width:122px" %)**Response** 807 -|(% style="width:155px" %)AT+RX1DL=?|(% style="width:128px" %)Get the delay.|(% style="width:122px" %)1000((( 600 +|=(% colspan="3" %)AT+RX1DL 601 +|**Command Example**|**Function**|**Response** 602 +|AT+RX1DL=?|Get the delay.|1000((( 808 808 OK 809 809 ))) 810 -| (% style="width:155px" %)AT+RX1DL=1500|(% style="width:128px" %)Set the delay.|(% style="width:122px" %)OK(((605 +|AT+RX1DL=1500|Set the delay.|OK((( 811 811 812 812 ))) 813 813 814 -== 7.11 609 +== 7.11Receive Delay2 == 815 815 816 816 Feature: Get or Set the delay between the end of the Tx and the Rx Window 2 in ms 817 817 818 -{{info}} 819 -**AT Command:AT+RX2DL** 820 -{{/info}} 613 +AT Command:AT+RX2DL 821 821 822 -(% border="1" style="background-color:#ffffcc; color:green; width:481.222px" %) 823 -|=(% colspan="3" style="width: 478px;" %)AT+RX2DL 824 -|(% style="width:175px" %)**Command Example**|(% style="width:152px" %)**Function**|(% style="width:150px" %)**Response** 825 -|(% style="width:175px" %)AT+RX2DL=?|(% style="width:152px" %)Get the delay.|(% style="width:150px" %)2000((( 615 +|=(% colspan="3" %)AT+RX2DL 616 +|**Command Example**|**Function**|**Response** 617 +|AT+RX2DL=?|Get the delay.|2000((( 826 826 OK 827 827 ))) 828 -| (% style="width:175px" %)AT+RX2DL=2500|(% style="width:152px" %)Set the delay.|(% style="width:150px" %)OK(((620 +|AT+RX2DL=2500|Set the delay.|OK((( 829 829 830 830 ))) 831 831 ... ... @@ -833,17 +833,14 @@ 833 833 834 834 Feature: Get or Set the Rx2 window data rate (0-7 corresponding to DR_X) 835 835 836 -{{info}} 837 -**AT Command:AT+RX2DR** 838 -{{/info}} 628 +AT Command:AT+RX2DR 839 839 840 -(% border="1" style="background-color:#ffffcc; color:green; width:525.222px" %) 841 -|=(% colspan="3" style="width: 522px;" %)AT+RX2DR 842 -|(% style="width:160px" %)**Command Example**|(% style="width:232px" %)**Function**|(% style="width:130px" %)**Response** 843 -|(% style="width:160px" %)AT+RX2DR=?|(% style="width:232px" %)Get the Rx2 window data rate.|(% style="width:130px" %)2((( 630 +|=(% colspan="3" %)AT+RX2DR 631 +|**Command Example**|**Function**|**Response** 632 +|AT+RX2DR=?|Get the Rx2 window data rate.|2((( 844 844 OK 845 845 ))) 846 -| (% style="width:160px" %)AT+RX2DR=6|(% style="width:232px" %)Set the Rx2 window data rate.|(% style="width:130px" %)OK(((635 +|AT+RX2DR=6|Set the Rx2 window data rate.|OK((( 847 847 848 848 ))) 849 849 ... ... @@ -851,17 +851,14 @@ 851 851 852 852 Feature: Get or Set the Rx2 window frequency 853 853 854 -{{info}} 855 -**AT Command:AT+RX2FQ** 856 -{{/info}} 643 +AT Command:AT+RX2FQ 857 857 858 -(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %) 859 -|=(% colspan="3" style="width: 584px;" %)AT+RX2FQ 860 -|(% style="width:183px" %)**Command Example**|(% style="width:240px" %)**Function**|(% style="width:160px" %)**Response** 861 -|(% style="width:183px" %)AT+RX2FQ=?|(% style="width:240px" %)Get the Rx2 window frequency.|(% style="width:160px" %)434665000((( 645 +|=(% colspan="3" %)AT+RX2FQ 646 +|**Command Example**|**Function**|**Response** 647 +|AT+RX2FQ=?|Get the Rx2 window frequency.|434665000((( 862 862 OK 863 863 ))) 864 -| (% style="width:183px" %)AT+RX2FQ=434665000|(% style="width:240px" %)Set the Rx2 window frequency.|(% style="width:160px" %)OK(((650 +|AT+RX2FQ=434665000|Set the Rx2 window frequency.|OK((( 865 865 866 866 ))) 867 867 ... ... @@ -869,17 +869,14 @@ 869 869 870 870 Feature: Get or Set the Transmit Power(0-5, MAX:0, MIN:5, according to LoRaWAN Spec, or 40=10dB, 41 = 11dB, …, 50 = 20dB which is out of LoRaWAN spec. ) 871 871 872 -{{info}} 873 -**AT Command:AT+TXP** 874 -{{/info}} 658 +AT Command:AT+TXP 875 875 876 -(% border="1" style="background-color:#ffffcc; color:green; width:465.222px" %) 877 -|=(% colspan="3" style="width: 462px;" %)AT+TXP 878 -|(% style="width:161px" %)**Command Example**|(% style="width:189px" %)**Function**|(% style="width:112px" %)**Response** 879 -|(% style="width:161px" %)AT+TXP=?|(% style="width:189px" %)Get the Transmit Power.|(% style="width:112px" %)0((( 660 +|=(% colspan="3" %)AT+TXP 661 +|**Command Example**|**Function**|**Response** 662 +|AT+TXP=?|Get the Transmit Power.|0((( 880 880 OK 881 881 ))) 882 -| (% style="width:161px" %)AT+TXP=1|(% style="width:189px" %)Set the Transmit Power.|(% style="width:112px" %)OK(((665 +|AT+TXP=1|Set the Transmit Power.|OK((( 883 883 884 884 ))) 885 885 ... ... @@ -887,21 +887,18 @@ 887 887 888 888 If the downlink payload=22000100, it means setting the TXP to 0. 889 889 890 -* **Example 1**: Downlink Payload:**22000102**~/~/ Set AT+TXP=2.891 -* **Example 2**: Downlink Payload:**220000FF**~/~/ Set AT+TXP=0.673 +* Example 1: Downlink Payload: 22000102 ~/~/ Set AT+TXP=2. 674 +* Example 2: Downlink Payload: 220000FF ~/~/ Set AT+TXP=0. 892 892 893 893 == 7.15 RSSI of the Last Received Packet == 894 894 895 895 Feature: Get or Set the Rx2 window frequency 896 896 897 -{{info}} 898 -**AT Command:AT+RSSI** 899 -{{/info}} 680 +AT Command:AT+RSSI 900 900 901 -(% border="1" style="background-color:#ffffcc; color:green; width:557.222px" %) 902 -|=(% colspan="3" style="width: 554px;" %)AT+RSSI 903 -|(% style="width:164px" %)**Command Example**|(% style="width:289px" %)**Function**|(% style="width:100px" %)**Response** 904 -|(% style="width:164px" %)AT+RSSI=?|(% style="width:289px" %)Get the RSSI of the last received packet.|(% style="width:100px" %)0((( 682 +|=(% colspan="3" %)AT+RSSI 683 +|**Command Example**|**Function**|**Response** 684 +|AT+RSSI=?|Get the RSSI of the last received packet.|0((( 905 905 OK 906 906 ))) 907 907 ... ... @@ -909,14 +909,11 @@ 909 909 910 910 Feature: Get the SNR of the last received packet 911 911 912 -{{info}} 913 -**AT Command:AT+SNR** 914 -{{/info}} 692 +AT Command:AT+SNR 915 915 916 -(% border="1" style="background-color:#ffffcc; color:green; width:571.222px" %) 917 -|=(% colspan="3" style="width: 568px;" %)AT+SNR 918 -|(% style="width:164px" %)**Command Example**|(% style="width:290px" %)**Function**|(% style="width:113px" %)**Response** 919 -|(% style="width:164px" %)AT+SNR=?|(% style="width:290px" %)Get the RSSI of the last received packet.|(% style="width:113px" %)0((( 694 +|=(% colspan="3" %)AT+SNR 695 +|**Command Example**|**Function**|**Response** 696 +|AT+SNR=?|Get the RSSI of the last received packet.|0((( 920 920 OK 921 921 ))) 922 922 ... ... @@ -924,144 +924,114 @@ 924 924 925 925 Feature: Get or set the application port. 926 926 927 -{{info}} 928 -**AT Command: AT+PORT** 929 -{{/info}} 704 +AT Command: AT+PORT 930 930 931 -(% border="1" style="background-color:#ffffcc; color:green; width:500.222px" %) 932 -|=(% colspan="3" style="width: 497px;" %)AT+PORT 933 -|(% style="width:157px" %)**Command Example**|(% style="width:204px" %)**Function**|(% style="width:135px" %)**Response** 934 -|(% style="width:157px" %)AT+PORT=?|(% style="width:204px" %)Get the application port|(% style="width:135px" %)21((( 706 +|=(% colspan="3" %)AT+PORT 707 +|**Command Example**|**Function**|**Response** 708 +|AT+PORT=?|Get the application port|21((( 935 935 OK 936 936 ))) 937 -| (% style="width:157px" %)AT+PORT=21|(% style="width:204px" %)Set the application port|(% style="width:135px" %)OK711 +|AT+PORT=21|Set the application port|OK 938 938 939 -{{info}} 940 -**Downlink Command: 0x23** 941 -{{/info}} 713 +Downlink Command: 0x23 942 942 943 943 Format: Command Code (0x23) followed by 1 bytes port value. 944 944 945 945 If the downlink payload=2301, it means set the application port to 1, while type code is 23. 946 946 947 -* **Example 1**: Downlink Payload:**2301**~/~/ set the application port to 1948 -* **Example 2**: Downlink Payload:**2305**~/~/ set the application port to 5719 +* Example 1: Downlink Payload: 2301 ~/~/ set the application port to 1 720 +* Example 2: Downlink Payload: 2305 ~/~/ set the application port to 5 949 949 950 950 == 7.18 Single Channel Mode == 951 951 952 952 Feature:Get or Set Frequency (Unit: Hz) for Single Channel Mode. 953 953 954 -{{info}} 955 -**AT Command: AT+CHS** 956 -{{/info}} 726 +AT Command: AT+CHS 957 957 958 -(% border="1" style="background-color:#ffffcc; color:green; width:603.222px" %) 959 -|=(% colspan="3" style="width: 600px;" %)AT+CHS 960 -|(% style="width:182px" %)**Command Example**|(% style="width:295px" %)**Function**|(% style="width:122px" %)**Response** 961 -|(% style="width:182px" %)AT+CHS=?|(% style="width:295px" %)Get Frequency for Single Channel Mode|(% style="width:122px" %)0((( 728 +|=(% colspan="3" %)AT+CHS 729 +|**Command Example**|**Function**|**Response** 730 +|AT+CHS=?|Get Frequency for Single Channel Mode|0((( 962 962 OK 963 963 ))) 964 -| (% style="width:182px" %)AT+CHS=868100000|(% style="width:295px" %)Set Frequency for Single Channel Mode|(% style="width:122px" %)OK733 +|AT+CHS=868100000|Set Frequency for Single Channel Mode|OK 965 965 966 966 == 7.19 Eight Channel Mode == 967 967 968 968 Feature: Get or Set eight channels mode,Only for US915,AU915,CN470. 969 969 970 -{{info}} 971 -**AT Command: AT+CHE** 972 -{{/info}} 739 +AT Command: AT+CHE 973 973 974 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %) 975 -|=(% colspan="3" style="width: 707px;" %)AT+CHE 976 -|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response** 977 -|(% style="width:160px" %)AT+CHE=?|(% style="width:198px" %)Get eight channels mode|(% style="width:349px" %)1((( 741 +|=(% colspan="3" %)AT+CHE 742 +|**Command Example**|**Function**|**Response** 743 +|AT+CHE=?|Get eight channels mode|1((( 978 978 902.3 902.5 902.7 902.9 903.1 903.3 903.5 903.7 979 979 980 980 OK 981 981 ))) 982 -| (% style="width:160px" %)AT+CHE=1|(% style="width:198px" %)Set eight channels mode|(% style="width:349px" %)OK748 +|AT+CHE=1|Set eight channels mode|OK 983 983 984 -{{info}} 985 -**Downlink Command: 0x24** 986 -{{/info}} 750 +Downlink Command: 0x24 987 987 988 988 Format: Command Code (0x24) followed by 1 bytes channel value. 989 989 990 990 If the downlink payload=2401, it means set channel mode to 1, while type code is 24. 991 991 992 -* **Example 1**: Downlink Payload: 2401 ~/~/ set channel mode to 1993 -* **Example 2**: Downlink Payload: 2405 ~/~/ set channel mode to 5756 +* Example 1: Downlink Payload: 2401 ~/~/ set channel mode to 1 757 +* Example 2: Downlink Payload: 2405 ~/~/ set channel mode to 5 994 994 995 995 == 7.20 Get or Set RXwindows1 timeout == 996 996 997 997 Feature:Get or Set the number of symbols to detect and timeout from RXwindow1(0 to 255). 998 998 999 -{{info}} 1000 -**AT Command: AT+RX1WTO** 1001 -{{/info}} 763 +AT Command: AT+RX1WTO 1002 1002 1003 -(% border="1" style="background-color:#ffffcc; color:green; width:460.222px" %) 1004 -|=(% colspan="3" style="width: 457px;" %)AT+ RX1WTO 1005 -|(% style="width:163px" %)**Command Example**|(% style="width:201px" %)**Function**|(% style="width:93px" %)**Response** 1006 -|(% style="width:163px" %)AT+RX1WTO=?|(% style="width:201px" %)Get RXwindows1 timeout|(% style="width:93px" %)14((( 765 +|=(% colspan="3" %)AT+ RX1WTO 766 +|**Command Example**|**Function**|**Response** 767 +|AT+RX1WTO=?|Get RXwindows1 timeout|14((( 1007 1007 OK 1008 1008 ))) 1009 -| (% style="width:163px" %)AT+RX1WTO=60|(% style="width:201px" %)Set RXwindows1 timeout|(% style="width:93px" %)OK770 +|AT+RX1WTO=60|Set RXwindows1 timeout|OK 1010 1010 1011 -((( 1012 -**AT+RX1TWO** is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph. 1013 -))) 772 +AT+RX1TWO is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph. 1014 1014 1015 -[[image:image -20220526162535-1.png]]774 +[[~[~[image:https://wiki.dragino.com/images/thumb/5/51/RX1WTO.JPG/600px-RX1WTO.JPG~|~|alt="RX1WTO.JPG" height="239" width="600"~]~]>>url:https://wiki.dragino.com/index.php/File:RX1WTO.JPG]] 1016 1016 1017 -((( 1018 1018 Increasing thisvalue is equal to extending the time that the receiving window is opened, butthe corresponding power consumption will also increase. Properly increasingthis value can increase the success rate of the downlink. 1019 1019 1020 - 1021 -))) 1022 - 1023 1023 == 7.21 Get or Set RXwindows2 timeout == 1024 1024 1025 1025 Feature:Get or Set the number of symbols to detect and timeout from RXwindow2(0 to 255). 1026 1026 1027 -{{info}} 1028 -**AT Command: AT+RX2WTO** 1029 -{{/info}} 782 +AT Command: AT+RX2WTO 1030 1030 1031 -(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %) 1032 -|=(% colspan="3" style="width: 494px;" %)AT+ RX2WTO 1033 -|(% style="width:190px" %)**Command Example**|(% style="width:199px" %)**Function**|(% style="width:104px" %)**Response** 1034 -|(% style="width:190px" %)AT+RX2WTO=?|(% style="width:199px" %)Get RXwindows2 timeout|(% style="width:104px" %)7((( 784 +|=(% colspan="3" %)AT+ RX2WTO 785 +|**Command Example**|**Function**|**Response** 786 +|AT+RX2WTO=?|Get RXwindows2 timeout|7((( 1035 1035 OK 1036 1036 ))) 1037 -| (% style="width:190px" %)AT+RX2WTO=20|(% style="width:199px" %)Set RXwindows2 timeout|(% style="width:104px" %)OK789 +|AT+RX2WTO=20|Set RXwindows2 timeout|OK 1038 1038 1039 1039 == 7.22 Setting up uplinkdwelltime (as923, au915) == 1040 1040 1041 1041 Feature: Get or Set uplinkdwelltime 1042 1042 1043 -{{info}} 1044 -**AT Command: AT+DWELLT** 1045 -{{/info}} 795 +AT Command: AT+DWELLT 1046 1046 1047 -(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %) 1048 -|=(% colspan="3" style="width: 494px;" %)AT+DWELLT 1049 -|(% style="width:183px" %)**Command Example**|(% style="width:179px" %)**Function**|(% style="width:131px" %)**Response** 1050 -|(% style="width:183px" %)AT+DWELLT=?|(% style="width:179px" %)Get uplinkdwelltime|(% style="width:131px" %)1((( 797 +|=(% colspan="3" %)AT+DWELLT 798 +|**Command Example**|**Function**|**Response** 799 +|AT+DWELLT=?|Get uplinkdwelltime|1((( 1051 1051 OK 1052 1052 ))) 1053 -| (% style="width:183px" %)AT+DWELLT=0|(% style="width:179px" %)Set uplinkdwelltime|(% style="width:131px" %)OK802 +|AT+DWELLT=0|Set uplinkdwelltime|OK 1054 1054 1055 -{{info}} 1056 -**Downlink Command: 0x25** 1057 -{{/info}} 804 +Downlink Command: 0x25 1058 1058 1059 1059 Format: Command Code (0x25) followed by 1 bytes state value. 1060 1060 1061 1061 If the downlink payload=2501, it means set uplinkdwelltime to 1, while type code is 25. 1062 1062 1063 -* **Example 1**: Downlink Payload:**2501**~/~/ set uplinkdwelltime to 11064 -* **Example 2**: Downlink Payload:**2500**~/~/ set uplinkdwelltime to 0810 +* Example 1: Downlink Payload: 2501 ~/~/ set uplinkdwelltime to 1 811 +* Example 2: Downlink Payload: 2500 ~/~/ set uplinkdwelltime to 0 1065 1065 1066 1066 == 7.23 Set Packet Receiving Response Level == 1067 1067 ... ... @@ -1069,11 +1069,11 @@ 1069 1069 1070 1070 RPL value: 1071 1071 1072 -* **AT+RPL=0:**Device won't immediately reply any downlink commands from platform.1073 -* **AT+RPL=1:**Device will immediately reply message to Unconfirmed Data Down. Payload is 0x00.1074 -* **AT+RPL=2:**Device will immediately reply message to Confirmed Data Down. Payload is 0x00 and requied response header for this command.1075 -* **AT+RPL=3:**Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command.1076 -* **AT+RPL=4:**Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands.819 +* AT+RPL=0: Device won't immediately reply any downlink commands from platform. 820 +* AT+RPL=1: Device will immediately reply message to Unconfirmed Data Down. Payload is 0x00. 821 +* AT+RPL=2: Device will immediately reply message to Confirmed Data Down. Payload is 0x00 and requied response header for this command. 822 +* AT+RPL=3: Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command. 823 +* AT+RPL=4: Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands. 1077 1077 1078 1078 Case Analyes: 1079 1079 ... ... @@ -1081,44 +1081,37 @@ 1081 1081 * For Class C devices used in ChirpStack, need to set AT+RPL=4 because Chirpstack require immedietely reply message to MAC Command. 1082 1082 * For Class C devices used in TTI, need to set AT+RPL=4 because TTI require immediately reply message to Confirmed Data Down & MAC Command. 1083 1083 1084 -{{info}} 1085 -**AT Command: AT+RPL** 1086 -{{/info}} 831 +AT Command: AT+RPL 1087 1087 1088 -(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %) 1089 -|=(% colspan="3" style="width: 533px;" %)AT+RPL 1090 -|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response** 1091 -|(% style="width:160px" %)AT+RPL=?|(% style="width:263px" %)Get packet receiving response level|(% style="width:109px" %)1((( 833 +|=(% colspan="3" %)AT+RPL 834 +|**Command Example**|**Function**|**Response** 835 +|AT+RPL=?|Get packet receiving response level|1((( 1092 1092 OK 1093 1093 ))) 1094 -| (% style="width:160px" %)AT+RPL=0|(% style="width:263px" %)Set packet receiving response level|(% style="width:109px" %)OK838 +|AT+RPL=0|Set packet receiving response level|OK 1095 1095 1096 -{{info}} 1097 -**Downlink Command: 0x21** 1098 -{{/info}} 840 +Downlink Command: 0x21 1099 1099 1100 1100 Format: Command Code (0x21) followed by 1 bytes level value. 1101 1101 1102 1102 If the downlink payload=2101, it means set packet receiving response level to 1, while type code is 21. 1103 1103 1104 -* **Example 1**: Downlink Payload:**2101**~/~/ set packet receiving response level to 11105 -* **Example 2**: Downlink Payload:**2102**~/~/ set packet receiving response level to 2846 +* Example 1: Downlink Payload: 2101 ~/~/ set packet receiving response level to 1 847 +* Example 2: Downlink Payload: 2102 ~/~/ set packet receiving response level to 2 1106 1106 1107 1107 = 8. AT Commands Combination = 1108 1108 1109 1109 == 8.1 Set a fix RX2DR for downlink window == 1110 1110 1111 -* **AT+ADR=0**~-~-> Disable ADR first1112 -* **AT+RX2DR=xxxx**~-~-> Set xxxx to your wanted DataRate853 +* AT+ADR=0 ~-~-> Disable ADR first 854 +* AT+RX2DR=xxxx ~-~-> Set xxxx to your wanted DataRate 1113 1113 1114 1114 == 8.2 Use Downlink Command to set a fix uplink DR == 1115 1115 1116 -{{info}} 1117 -**Downlink Command: 0x22000500** 1118 -{{/info}} 858 +Downlink Command: 0x22000500 1119 1119 1120 1120 Same as: 1121 1121 1122 -* AT+ADR=0 ||anchor="H7.1AdaptiveDataRate"]]1123 -* AT+DR=5 ||anchor="H7.4DataRate"]]1124 -* AT+TXP=0 ||anchor="H7.14TransmitPower"]]862 +* AT+ADR=0 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Adaptive_Data_Rate]] 863 +* AT+DR=5 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Data_Rate]] 864 +* AT+TXP=0 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Transmit_Power]]
- image-20220511120050-1.png
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -XWiki.Xiaoling - Size
-
... ... @@ -1,1 +1,0 @@ 1 -136.3 KB - Content
- image-20220526162535-1.png
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -XWiki.Xiaoling - Size
-
... ... @@ -1,1 +1,0 @@ 1 -149.4 KB - Content