Last modified by kai on 2024/09/06 10:00
<
From version < 38.110 >
edited by Xiaoling
on 2022/06/01 11:55
To version < 50.5 >
edited by Xiaoling
on 2022/07/13 12:01
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,4 +1,4 @@
1 - **Contents：**
1 + **Table of** **Contents：**
2 2  
3 3  {{toc/}}
4 4  
... ... @@ -6,6 +6,7 @@
6 6  
7 7  = 1. Introduction =
8 8  
9 +
9 9  Dragino LoRaWAN End Node support two types of AT Commands and Downlink Commands:
10 10  
11 11  * **Common Commands:** They should be available for each sensor, such as: change uplink interval, reset device.
... ... @@ -18,6 +18,7 @@
18 18  
19 19  = 2. How to use AT Commands or Downlink command =
20 20  
22 +
21 21  * For AT Command , See Devices User Manual for Device. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
22 22  * For LoRaWAN Downlink: The gateway transfer downlink command in HEX format. This page shows the HEX format downlink code for each command. but some servers use base64 as downlink code. Below are reference for how to use downlink command:
23 23  ** Use HEX format to send a downlink: [[TTN v3>>Notes for TTN]]
... ... @@ -28,6 +28,7 @@
28 28  
29 29  = 3. Support End Node and firmware version =
30 30  
33 +
31 31  (% border="1" style="background-color:#ffffcc; color:green; width:966px" %)
32 32  |=(% colspan="3" style="width: 963px;" %)(((
33 33  Dragino STM32 base hardware Firmware / LoRaWAN stack list
... ... @@ -103,14 +103,13 @@
103 103  
104 104  = 4. System Management Commands =
105 105  
109 +
106 106  == 4.1 Change Uplink Interval ==
107 107  
112 +
108 108  Feature: Change LoRaWAN End Node Transmit Interval.
109 109  
110 -(% class="box infomessage" %)
111 -(((
112 -**AT Command: AT+TDC**
113 -)))
115 +(% style="color:blue" %)**AT Command: AT+TDC**
114 114  
115 115  (% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
116 116  |=(% colspan="3" style="width: 724px;" %)AT+TDC
... ... @@ -124,11 +124,11 @@
124 124  Set transmit interval to 60000ms = 60 seconds
125 125  )))
126 126  
127 -{{info}}
128 -**Downlink Command: 0x01**
129 -{{/info}}
130 -
131 131  (((
130 +
131 +
132 +(% style="color:blue" %)**Downlink Command: 0x01**
133 +
132 132  Format: Command Code (0x01) followed by 3 bytes time value.
133 133  )))
134 134  
... ... @@ -143,12 +143,13 @@
143 143  
144 144  == 4.2 Reboot End Node ==
145 145  
148 +
146 146  Feature: Reboot End Node to perform a new OTAA or ABP Join.
147 147  
148 -{{info}}
149 -**AT Command: ATZ**
150 -{{/info}}
151 151  
152 +(% style="color:blue" %)**AT Command: ATZ**
153 +
154 +
152 152  (% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
153 153  |=(% colspan="3" %)ATZ: Trig a reset of the MCU
154 154  |**Command Example**|**Function**|**Response**
... ... @@ -166,10 +166,10 @@
166 166  <followed by the Tx and Rx information>
167 167  )))
168 168  
169 -{{info}}
170 -**Downlink Command: 0x04**
171 -{{/info}}
172 172  
173 +(% style="color:blue" %)**Downlink Command: 0x04**
174 +
175 +
173 173  (((
174 174  Format: Command Code (0x04) followed by FF.
175 175  )))
... ... @@ -182,11 +182,10 @@
182 182  
183 183  == 4.3 Reset to factory Default ==
184 184  
188 +
185 185  Feature: Reset the parameters to Factory Default, factory default value depends on the firmware settings, the OTAA and ABP keys will reserve after this command.
186 186  
187 -{{info}}
188 -**AT Command: AT+FDR**
189 -{{/info}}
191 +(% style="color:blue" %)**AT Command: AT+FDR**
190 190  
191 191  (% border="1" style="background-color:#ffffcc; color:green; width:831.222px" %)
192 192  |=(% colspan="3" style="width: 828px;" %)Reset to factory default
... ... @@ -205,10 +205,10 @@
205 205  Please set the parameters or reset Device to apply change
206 206  )))
207 207  
208 -{{info}}
209 -**Downlink Command: 0x04**
210 -{{/info}}
211 211  
211 +(% style="color:blue" %)**Downlink Command: 0x04**
212 +
213 +
212 212  (((
213 213  Format: Command Code (0x04) followed by FE.
214 214  )))
... ... @@ -222,10 +222,10 @@
222 222  
223 223  Feature: Show firmware version. No downlink command yet.
224 224  
225 -{{info}}
226 -**AT Command: AT+VER**
227 -{{/info}}
228 228  
228 +(% style="color:blue" %)**AT Command: AT+VER**
229 +
230 +
229 229  (% border="1" style="background-color:#ffffcc; color:green; width:586px" %)
230 230  |=(% colspan="3" style="width: 583px;" %)AT+VER: Image Version and Frequency Band
231 231  |(% style="width:170px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:113px" %)**Response**
... ... @@ -235,10 +235,10 @@
235 235  OK
236 236  )))
237 237  
238 -{{info}}
239 -**Downlink Command: 0x26 (Valid in 006 stack)**
240 -{{/info}}
241 241  
241 +(% style="color:blue" %)**Downlink Command: 0x26 (Valid in 006 stack)**
242 +
243 +
242 242  (((
243 243  Downlink Format: 0x26
244 244  )))
... ... @@ -281,10 +281,10 @@
281 281  
282 282  Feature: Show All configure. No downlink command yet.
283 283  
284 -{{info}}
285 -**AT Command: AT+CFG**
286 -{{/info}}
287 287  
287 +(% style="color:blue" %)**AT Command: AT+CFG**
288 +
289 +
288 288  (% border="1" style="background-color:#ffffcc; color:green; width:599.222px" %)
289 289  |=(% colspan="3" style="width: 596px;" %)AT+CFG: Print all configurations
290 290  |(% style="width:160px" %)**Command Example**|(% style="width:154px" %)**Function**|(% style="width:280px" %)**Response**
... ... @@ -302,8 +302,6 @@
302 302  OK
303 303  )))
304 304  
305 -
306 -
307 307  = 5. Keys, IDs and EUIs management =
308 308  
309 309  == 5.1 Application EUI ==
... ... @@ -310,10 +310,10 @@
310 310  
311 311  Feature: Get or Set the Application EUI.
312 312  
313 -{{info}}
314 -**AT Command: AT+APPEUI**
315 -{{/info}}
316 316  
314 +(% style="color:blue" %)**AT Command: AT+APPEUI**
315 +
316 +
317 317  (% border="1" style="background-color:#ffffcc; color:green; width:686.222px" %)
318 318  |=(% colspan="3" style="width: 683px;" %)AT+APPEUI
319 319  |(% style="width:305px" %)**Command Example**|(% style="width:186px" %)**Function**|(% style="width:191px" %)**Response**
... ... @@ -322,16 +322,14 @@
322 322  )))
323 323  |(% style="width:305px" %)AT+APPEUI=00 b3 d5 7e f0 00 4d 34|(% style="width:186px" %)Set the Application EUI|(% style="width:191px" %)OK
324 324  
325 -
326 -
327 327  == 5.2 Application Key ==
328 328  
329 329  Feature: Get or Set the Application Key.
330 330  
331 -{{info}}
332 -**AT Command: AT+APPKEY**
333 -{{/info}}
334 334  
330 +(% style="color:blue" %)**AT Command: AT+APPKEY**
331 +
332 +
335 335  (% border="1" style="background-color:#ffffcc; color:green; width:976.222px" %)
336 336  |=(% colspan="3" style="width: 973px;" %)AT+APPKEY
337 337  |(% style="width:441px" %)**Command Example**|(% style="width:180px" %)**Function**|(% style="width:350px" %)**Response**
... ... @@ -340,16 +340,14 @@
340 340  )))
341 341  |(% style="width:441px" %)AT+APPKEY=00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35|(% style="width:180px" %)Set the Application Key|(% style="width:350px" %)OK
342 342  
343 -
344 -
345 345  == 5.3 Application Session Key ==
346 346  
347 347  Feature: Get or Set the Application Session Key.
348 348  
349 -{{info}}
350 -**AT Command: AT+APPSKEY**
351 -{{/info}}
352 352  
346 +(% style="color:blue" %)**AT Command: AT+APPSKEY**
347 +
348 +
353 353  (% border="1" style="background-color:#ffffcc; color:green; width:1040.22px" %)
354 354  |=(% colspan="3" style="width: 1037px;" %)AT+APPSKEY
355 355  |(% style="width:451px" %)**Command Example**|(% style="width:231px" %)**Function**|(% style="width:354px" %)**Response**
... ... @@ -360,16 +360,14 @@
360 360  OK
361 361  )))
362 362  
363 -
364 -
365 365  == 5.4 Device Address ==
366 366  
367 367  Feature: Get or Set the Device Address.
368 368  
369 -{{info}}
370 -**AT Command: AT+DADDR**
371 -{{/info}}
372 372  
364 +(% style="color:blue" %)**AT Command: AT+DADDR**
365 +
366 +
373 373  (% border="1" style="background-color:#ffffcc; color:green; width:795.222px" %)
374 374  |=(% colspan="3" style="width: 792px;" %)AT+DADDR
375 375  |(% style="width:192px" %)**Command Example**|(% style="width:241px" %)**Function**|(% style="width:359px" %)**Response**
... ... @@ -380,16 +380,14 @@
380 380  )))
381 381  |(% style="width:192px" %)AT+DADDR=A8 40 41 FF|(% style="width:241px" %)Set the Application Session Key.|(% style="width:359px" %)OK
382 382  
383 -
384 -
385 385  == 5.5 Device EUI ==
386 386  
387 387  Feature: Get or Set the Device EUI.
388 388  
389 -{{info}}
390 -**AT Command: AT+DEUI**
391 -{{/info}}
392 392  
382 +(% style="color:blue" %)**AT Command: AT+DEUI**
383 +
384 +
393 393  (% border="1" style="background-color:#ffffcc; color:green; width:1035.22px" %)
394 394  |=(% colspan="3" style="width: 1032px;" %)AT+DEUI
395 395  |(% style="width:250px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:634px" %)**Response**
... ... @@ -400,16 +400,14 @@
400 400  OK
401 401  )))
402 402  
403 -
404 -
405 405  == 5.6 Network ID ==
406 406  
407 407  Feature: Get or Set the Network ID.(You can enter this command change only after successful network connection)
408 408  
409 -{{info}}
410 -**AT Command: AT+NWKID**
411 -{{/info}}
412 412  
400 +(% style="color:blue" %)**AT Command: AT+NWKID**
401 +
402 +
413 413  (% border="1" style="background-color:#ffffcc; color:green; width:448.222px" %)
414 414  |=(% colspan="3" style="width: 445px;" %)AT+NWKID
415 415  |(% style="width:191px" %)**Command Example**|(% style="width:153px" %)**Function**|(% style="width:101px" %)**Response**
... ... @@ -422,10 +422,10 @@
422 422  
423 423  Feature: Get or Set the Network Session Key
424 424  
425 -{{info}}
426 -**AT Command: AT+NWKSKEY**
427 -{{/info}}
428 428  
416 +(% style="color:blue" %)**AT Command: AT+NWKSKEY**
417 +
418 +
429 429  (% border="1" style="background-color:#ffffcc; color:green; width:1017.22px" %)
430 430  |=(% colspan="3" style="width: 1014px;" %)AT+NWKSKEY
431 431  |(% style="width:455px" %)**Command Example**|(% style="width:215px" %)**Function**|(% style="width:343px" %)**Response**
... ... @@ -438,12 +438,14 @@
438 438  
439 439  == 6.1 Confirm Mode ==
440 440  
431 +=== AT+CFM command before DR-LWS007 software stack ===
432 +
441 441  Feature: Get or Set the confirmation mode (0-1).
442 442  
443 -{{info}}
444 -**AT Command: AT+CFM**
445 -{{/info}}
446 446  
436 +(% style="color:blue" %)**AT Command: AT+CFM**
437 +
438 +
447 447  (% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
448 448  |=(% colspan="3" style="width: 707px;" %)AT+CFM
449 449  |(% style="width:155px" %)**Command Example**|(% style="width:205px" %)**Function**|(% style="width:346px" %)**Response**
... ... @@ -453,7 +453,7 @@
453 453  |(% style="width:155px" %)AT+CFM=1|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)OK
454 454  |(% style="width:155px" %)AT+CFM=2|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)While Error in format, return AT_PARAM_ERROR
455 455  
456 -Downlink Command: 0x05
448 +(% style="color:blue" %)**Downlink Command: 0x05**
457 457  
458 458  Format: Command Code (0x05) followed by 2 bytes mode value.
459 459  
... ... @@ -462,14 +462,62 @@
462 462  * Example 1: Downlink Payload: 0501 ~/~/ Set AT+CFM=1
463 463  * Example 2: Downlink Payload: 0500 ~/~/ Set AT+CFM=0
464 464  
457 +=== AT+CFM command since DR-LWS007 software stack ===
458 +
459 +
460 +(% style="color:blue" %)**AT Command: AT+CFM**
461 +
462 +
463 +(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
464 +|=(% colspan="3" style="width: 707px;" %)AT+CFM
465 +|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
466 +|(% style="width:160px" %)(((
467 +AT+CFM=1,0,0
468 +
469 +value1
470 +)))|(% style="width:198px" %)confirmed uplink|(% style="width:349px" %)(((
471 +1
472 +
473 +OK
474 +)))
475 +|(% style="width:160px" %)(((
476 +AT+CFM=0,?,0
477 +
478 +value2
479 +)))|(% style="width:198px" %)set max retry , range: 0 ~~ 7|(% style="width:349px" %)(((
480 +0~~7
481 +
482 +OK
483 +)))
484 +|(% style="width:160px" %)(((
485 +AT+CFM=0,0,1
486 +
487 +value3
488 +)))|(% style="width:198px" %)uplink fcnt increase by 1 for each retry|(% style="width:349px" %)(((
489 +1
490 +
491 +OK
492 +)))
493 +
494 +
495 +(% style="color:blue" %)**Downlink Command: 0x05**
496 +
497 +
498 +Format: Command Code (0x05) followed by 2 bytes mode value.
499 +
500 +If the downlink payload=05010101, it means set end node to use confirm mode, while type code is 05.
501 +
502 +* Example 1: Downlink Payload: 05010101 ~/~/ Set AT+CFM=1,1,1
503 +* Example 2: Downlink Payload: 05000700 ~/~/ Set AT+CFM=0,7,0
504 +
465 465  == 6.2 Confirm Status ==
466 466  
467 467  Feature: Get confirmation status of the last AT+SEND (0-1).
468 468  
469 -{{info}}
470 -**AT Command: AT+CFS**
471 -{{/info}}
472 472  
510 +(% style="color:blue" %)**AT Command: AT+CFS**
511 +
512 +
473 473  (% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
474 474  |=(% colspan="3" style="width: 531px;" %)AT+CFS
475 475  |(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:178px" %)**Response**
... ... @@ -481,10 +481,10 @@
481 481  
482 482  Feature: Join network.
483 483  
484 -{{info}}
485 -**AT Command: AT+JOIN**
486 -{{/info}}
487 487  
525 +(% style="color:blue" %)**AT Command: AT+JOIN**
526 +
527 +
488 488  (% border="1" style="background-color:#ffffcc; color:green; width:647.222px" %)
489 489  |=(% colspan="3" style="width: 644px;" %)AT+JOIN
490 490  |(% style="width:163px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:334px" %)**Response**
... ... @@ -498,10 +498,10 @@
498 498  
499 499  Feature: Get or Set the Network Join Mode. (0: ABP, 1: OTAA).
500 500  
501 -{{info}}
502 -**AT Command: AT+NJM**
503 -{{/info}}
504 504  
542 +(% style="color:blue" %)**AT Command: AT+NJM**
543 +
544 +
505 505  (% border="1" style="background-color:#ffffcc; color:green; width:753.222px" %)
506 506  |=(% colspan="3" style="width: 750px;" %)AT+NJM
507 507  |(% style="width:162px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:361px" %)**Response**
... ... @@ -511,15 +511,15 @@
511 511  |(% style="width:162px" %)AT+NJM=0|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)OK
512 512  |(% style="width:162px" %)AT+NJM=2|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)While Error in format, return AT_PARAM_ERROR
513 513  
514 -{{info}}
515 -**Downlink Command: 0x20**
516 -{{/info}}
517 517  
555 +(% style="color:blue" %)**Downlink Command: 0x20**
556 +
557 +
518 518  Format: Command Code (0x20) followed by 1 bytes mode value.
519 519  
520 520  If the downlink payload=2000, it means set the Network Join Mode, while type code is 20.
521 521  
522 -* **Example 1: **Downlink Payload: **2000** ~/~/ Set AT+NJM=O
562 +* **Example 1: **Downlink Payload: **2000** ~/~/ Set AT+NJM=0
523 523  * **Example 2:** Downlink Payload: **2001** ~/~/ Set AT+NJM=1
524 524  
525 525  == 6.5 LoRa® Network Join Status ==
... ... @@ -526,10 +526,10 @@
526 526  
527 527  Feature: LoRa® Network Join Status.
528 528  
529 -{{info}}
530 -**AT Command: AT+NJS**
531 -{{/info}}
532 532  
570 +(% style="color:blue" %)**AT Command: AT+NJS**
571 +
572 +
533 533  (% border="1" style="background-color:#ffffcc; color:green; width:498.222px" %)
534 534  |=(% colspan="3" style="width: 495px;" %)AT+NJS
535 535  |(% style="width:169px" %)**Command Example**|(% style="width:164px" %)**Function**|(% style="width:161px" %)**Response**
... ... @@ -541,10 +541,10 @@
541 541  
542 542  Feature: Print Last Received Data in Raw Format<port:data>.
543 543  
544 -{{info}}
545 -**AT Command: AT+RECV**
546 -{{/info}}
547 547  
585 +(% style="color:blue" %)**AT Command: AT+RECV**
586 +
587 +
548 548  (% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
549 549  |=(% colspan="3" style="width: 584px;" %)AT+RECV
550 550  |(% style="width:161px" %)**Command Example**|(% style="width:272px" %)**Function**|(% style="width:150px" %)**Response**
... ... @@ -556,10 +556,10 @@
556 556  
557 557  Feature: Print Last Received Data in Binary Format<port:data>.
558 558  
559 -{{info}}
560 -**AT Command: AT+RECVB**
561 -{{/info}}
562 562  
600 +(% style="color:blue" %)**AT Command: AT+RECVB**
601 +
602 +
563 563  (% border="1" style="background-color:#ffffcc; color:green; width:793.222px" %)
564 564  |=(% colspan="3" style="width: 790px;" %)AT+RECVB
565 565  |(% style="width:173px" %)**Command Example**|(% style="width:497px" %)**Function**|(% style="width:120px" %)**Response**
... ... @@ -571,10 +571,10 @@
571 571  
572 572  Feature: Send Text Data<port:data>.
573 573  
574 -{{info}}
575 -**AT Command: AT+SEND**
576 -{{/info}}
577 577  
615 +(% style="color:blue" %)**AT Command: AT+SEND**
616 +
617 +
578 578  (% border="1" style="background-color:#ffffcc; color:green; width:991.222px" %)
579 579  |=(% colspan="3" style="width: 988px;" %)AT+SEND
580 580  |(% style="width:201px" %)**Command Example**|(% style="width:340px" %)**Function**|(% style="width:446px" %)**Response**
... ... @@ -590,10 +590,10 @@
590 590  
591 591  Feature: Send hexadecimal data along with the application port.
592 592  
593 -{{info}}
594 -**AT Command: AT+SENDB**
595 -{{/info}}
596 596  
634 +(% style="color:blue" %)**AT Command: AT+SENDB**
635 +
636 +
597 597  (% border="1" style="background-color:#ffffcc; color:green; width:1120.22px" %)
598 598  |=(% colspan="3" style="width: 1117px;" %)AT+SENDB
599 599  |(% style="width:257px" %)**Command Example**|(% style="width:406px" %)**Function**|(% style="width:453px" %)**Response**
... ... @@ -610,10 +610,10 @@
610 610  
611 611  Feature: Get or Set the Adaptive Data Rate setting. (0: off, 1: on).
612 612  
613 -{{info}}
614 -**AT Command: AT+ADR**
615 -{{/info}}
616 616  
654 +(% style="color:blue" %)**AT Command: AT+ADR**
655 +
656 +
617 617  (% border="1" style="background-color:#ffffcc; color:green; width:683.222px" %)
618 618  |=(% colspan="3" style="width: 680px;" %)AT+ADR
619 619  |(% style="width:162px" %)**Command Example**|(% style="width:266px" %)**Function**|(% style="width:250px" %)**Response**
... ... @@ -625,11 +625,11 @@
625 625  AT_PARAM_ERROR
626 626  )))
627 627  
628 -{{info}}
629 -**Downlink Command: 0x22**
630 -{{/info}}
631 631  
669 +(% style="color:blue" %)**Downlink Command: 0x22**
632 632  
671 +
672 +
633 633  If the downlink payload=2201, it means setting the adaptive data rate to 1, while type code is 22.
634 634  
635 635  * **Example 1**: Downlink Payload: **2201** ~/~/ Set AT+ADR=1.
... ... @@ -639,10 +639,10 @@
639 639  
640 640  Feature: Get or Set the Device Class(Currently only support class A, class C).
641 641  
642 -{{info}}
643 -**AT Command:AT+CLASS**
644 -{{/info}}
645 645  
683 +(% style="color:blue" %)**AT Command:AT+CLASS**
684 +
685 +
646 646  (% border="1" style="background-color:#ffffcc; color:green; width:507.222px" %)
647 647  |=(% colspan="3" style="width: 504px;" %)AT+CLASS
648 648  |(% style="width:163px" %)**Command Example**|(% style="width:166px" %)**Function**|(% style="width:175px" %)**Response**
... ... @@ -657,10 +657,10 @@
657 657  
658 658  Feature: Get or Set the ETSI Duty Cycle setting - 0=disable, 1=enable - Only for testing.
659 659  
660 -{{info}}
661 -**AT Command:AT+DCS**
662 -{{/info}}
663 663  
701 +(% style="color:blue" %)**AT Command:AT+DCS**
702 +
703 +
664 664  (% border="1" style="background-color:#ffffcc; color:green; width:515.222px" %)
665 665  |=(% colspan="3" style="width: 512px;" %)AT+DCS
666 666  |(% style="width:165px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:107px" %)**Response**
... ... @@ -675,10 +675,10 @@
675 675  
676 676  Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) . Note: while set Data Rate, please use set Adptive Data Rate, ADR=0 first. otherwise device will response to server's ADR command and change the DR to the setting from server
677 677  
678 -{{info}}
679 -**AT Command: AT+DR**
680 -{{/info}}
681 681  
719 +(% style="color:blue" %)**AT Command: AT+DR**
720 +
721 +
682 682  (% border="1" style="background-color:#ffffcc; color:green; width:466.222px" %)
683 683  |=(% colspan="3" style="width: 463px;" %)AT+DR
684 684  |(% style="width:156px" %)**Command Example**|(% style="width:167px" %)**Function**|(% style="width:140px" %)**Response**
... ... @@ -689,11 +689,11 @@
689 689  
690 690  )))
691 691  
692 -{{info}}
693 -**Downlink Command: 0x2200aaFF**
694 -{{/info}}
695 695  
733 +(% style="color:blue" %)**Downlink Command: 0x2200aaFF**
696 696  
735 +
736 +
697 697  If the downlink payload=220001FF, it means setting the data rate to 1, while type code is 22 00 aa FF.
698 698  
699 699  * **Example 1**: Downlink Payload: **220001FF** ~/~/ Set AT+DR=1.
... ... @@ -703,10 +703,10 @@
703 703  
704 704  Feature: Get or Set the Frame Counter Downlink.
705 705  
706 -{{info}}
707 -**AT Command:AT+FCD**
708 -{{/info}}
709 709  
747 +(% style="color:blue" %)**AT Command:AT+FCD**
748 +
749 +
710 710  (% border="1" style="background-color:#ffffcc; color:green; width:693.222px" %)
711 711  |=(% colspan="3" style="width: 690px;" %)AT+FCD
712 712  |(% style="width:162px" %)**Command Example**|(% style="width:258px" %)**Function**|(% style="width:269px" %)**Response**
... ... @@ -723,10 +723,10 @@
723 723  
724 724  Feature: Get or Set the Frame Counter Uplink.
725 725  
726 -{{info}}
727 -**AT Command:AT+FCU**
728 -{{/info}}
729 729  
767 +(% style="color:blue" %)**AT Command:AT+FCU**
768 +
769 +
730 730  (% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
731 731  |=(% colspan="3" style="width: 531px;" %)AT+FCU
732 732  |(% style="width:177px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:113px" %)**Response**
... ... @@ -741,10 +741,10 @@
741 741  
742 742  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 1 in ms.
743 743  
744 -{{info}}
745 -**AT Command:AT+JN1DL**
746 -{{/info}}
747 747  
785 +(% style="color:blue" %)**AT Command:AT+JN1DL**
786 +
787 +
748 748  (% border="1" style="background-color:#ffffcc; color:green; width:537.222px" %)
749 749  |=(% colspan="3" style="width: 534px;" %)AT+JN1DL
750 750  |(% style="width:164px" %)**Command Example**|(% style="width:229px" %)**Function**|(% style="width:140px" %)**Response**
... ... @@ -759,10 +759,10 @@
759 759  
760 760  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 2 in ms.
761 761  
762 -{{info}}
763 -**AT Command:AT+JN2DL**
764 -{{/info}}
765 765  
803 +(% style="color:blue" %)**AT Command:AT+JN2DL**
804 +
805 +
766 766  (% border="1" style="background-color:#ffffcc; color:green; width:538.222px" %)
767 767  |=(% colspan="3" style="width: 535px;" %)AT+JN2DL
768 768  |(% style="width:160px" %)**Command Example**|(% style="width:228px" %)**Function**|(% style="width:146px" %)**Response**
... ... @@ -775,12 +775,14 @@
775 775  
776 776  == 7.9 Public Network Mode ==
777 777  
778 -Feature: Get or Set the public network mode. (0: off, 1: on)
818 +Feature: Get or Set the public network mode. (0: off, 1: on). A Public LoRaWAN network use 0x34 as syncword. Default Settings; PNM=1
779 779  
780 -{{info}}
781 -**AT Command:AT+PNM**
782 -{{/info}}
820 +Notice: If user build their own LoRaWAN server but still use syncword=0x34, this is still considered a public LoRaWAN network
783 783  
822 +
823 +(% style="color:blue" %)**AT Command:AT+PNM**
824 +
825 +
784 784  (% border="1" style="background-color:#ffffcc; color:green; width:667.222px" %)
785 785  |=(% colspan="3" style="width: 664px;" %)AT+PNM
786 786  |(% style="width:166px" %)**Command Example**|(% style="width:225px" %)**Function**|(% style="width:272px" %)**Response**
... ... @@ -787,20 +787,25 @@
787 787  |(% style="width:166px" %)AT+PNM=?|(% style="width:225px" %)Get the public network mode.|(% style="width:272px" %)1(((
788 788  OK
789 789  )))
790 -|(% style="width:166px" %)AT+PNM=1|(% style="width:225px" %)Set the public network mode.|(% style="width:272px" %)(System will write new value to PNM)(((
832 +|(% style="width:166px" %)AT+PNM=1|(% style="width:225px" %)(((
833 +Set the public network mode.
834 +
835 +Set syncword=0x34
836 +)))|(% style="width:272px" %)(System will write new value to PNM)(((
791 791  OK
792 792  
793 793  
794 794  )))
841 +|(% style="width:166px" %)AT+PNM=0|(% style="width:225px" %)Set to use private network autoset syncword=0x12|(% style="width:272px" %)
795 795  
796 796  == 7.10 Receive Delay1 ==
797 797  
798 798  Feature: Get or Set the delay between the end of the Tx and the Rx Window 1 in ms
799 799  
800 -{{info}}
801 -**AT Command:AT+RX1DL**
802 -{{/info}}
803 803  
848 +(% style="color:blue" %)**AT Command:AT+RX1DL**
849 +
850 +
804 804  (% border="1" style="background-color:#ffffcc; color:green; width:408.222px" %)
805 805  |=(% colspan="3" style="width: 405px;" %)AT+RX1DL
806 806  |(% style="width:155px" %)**Command Example**|(% style="width:128px" %)**Function**|(% style="width:122px" %)**Response**
... ... @@ -815,10 +815,10 @@
815 815  
816 816  Feature: Get or Set the delay between the end of the Tx and the Rx Window 2 in ms
817 817  
818 -{{info}}
819 -**AT Command:AT+RX2DL**
820 -{{/info}}
821 821  
866 +(% style="color:blue" %)**AT Command:AT+RX2DL**
867 +
868 +
822 822  (% border="1" style="background-color:#ffffcc; color:green; width:481.222px" %)
823 823  |=(% colspan="3" style="width: 478px;" %)AT+RX2DL
824 824  |(% style="width:175px" %)**Command Example**|(% style="width:152px" %)**Function**|(% style="width:150px" %)**Response**
... ... @@ -833,10 +833,10 @@
833 833  
834 834  Feature: Get or Set the Rx2 window data rate (0-7 corresponding to DR_X)
835 835  
836 -{{info}}
837 -**AT Command:AT+RX2DR**
838 -{{/info}}
839 839  
884 +(% style="color:blue" %)**AT Command:AT+RX2DR**
885 +
886 +
840 840  (% border="1" style="background-color:#ffffcc; color:green; width:525.222px" %)
841 841  |=(% colspan="3" style="width: 522px;" %)AT+RX2DR
842 842  |(% style="width:160px" %)**Command Example**|(% style="width:232px" %)**Function**|(% style="width:130px" %)**Response**
... ... @@ -851,10 +851,10 @@
851 851  
852 852  Feature: Get or Set the Rx2 window frequency
853 853  
854 -{{info}}
855 -**AT Command:AT+RX2FQ**
856 -{{/info}}
857 857  
902 +(% style="color:blue" %)**AT Command:AT+RX2FQ**
903 +
904 +
858 858  (% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
859 859  |=(% colspan="3" style="width: 584px;" %)AT+RX2FQ
860 860  |(% style="width:183px" %)**Command Example**|(% style="width:240px" %)**Function**|(% style="width:160px" %)**Response**
... ... @@ -869,10 +869,10 @@
869 869  
870 870  Feature: Get or Set the Transmit Power(0-5, MAX:0, MIN:5, according to LoRaWAN Spec, or 40=10dB, 41 = 11dB, …, 50 = 20dB which is out of LoRaWAN spec. )
871 871  
872 -{{info}}
873 -**AT Command:AT+TXP**
874 -{{/info}}
875 875  
920 +(% style="color:blue" %)**AT Command:AT+TXP**
921 +
922 +
876 876  (% border="1" style="background-color:#ffffcc; color:green; width:465.222px" %)
877 877  |=(% colspan="3" style="width: 462px;" %)AT+TXP
878 878  |(% style="width:161px" %)**Command Example**|(% style="width:189px" %)**Function**|(% style="width:112px" %)**Response**
... ... @@ -894,10 +894,10 @@
894 894  
895 895  Feature: Get or Set the Rx2 window frequency
896 896  
897 -{{info}}
898 -**AT Command:AT+RSSI**
899 -{{/info}}
900 900  
945 +(% style="color:blue" %)**AT Command:AT+RSSI**
946 +
947 +
901 901  (% border="1" style="background-color:#ffffcc; color:green; width:557.222px" %)
902 902  |=(% colspan="3" style="width: 554px;" %)AT+RSSI
903 903  |(% style="width:164px" %)**Command Example**|(% style="width:289px" %)**Function**|(% style="width:100px" %)**Response**
... ... @@ -1104,6 +1104,129 @@
1104 1104  * **Example 1**: Downlink Payload: **2101** ~/~/ set packet receiving response level to 1
1105 1105  * **Example 2**: Downlink Payload: **2102** ~/~/ set packet receiving response level to 2
1106 1106  
1154 +== 7.24 Controls NBTrans in unconfirmed uplink mode（LWS007 NBTrans:Set retransmission packets) ==
1155 +
1156 +{{info}}
1157 +**AT Command: AT+SETMAXNBTRANS **
1158 +{{/info}}
1159 +
1160 +(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1161 +|=(% colspan="3" style="width: 533px;" %)AT+**SETMAXNBTRANS**
1162 +|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1163 +|(% style="width:160px" %)**AT+SETMAXNBTRANS=1，0**|(% style="width:263px" %)Value1: set the maximum NBTrans.|(% style="width:109px" %)1(((
1164 +OK
1165 +)))
1166 +|(% style="width:160px" %)**AT+SETMAXNBTRANS=？，1**|(% style="width:263px" %)value2: 0: uplink fcnt doesn't change for each NBTrans; 1: uplink fcnt increase by 1 for each NBTrans.|(% style="width:109px" %)(((
1167 +1
1168 +
1169 +OK
1170 +)))
1171 +
1172 +{{info}}
1173 +**Downlink Command: 0x33**
1174 +{{/info}}
1175 +
1176 +Format: Command Code (0x33) followed by 2 bytes mode value.
1177 +
1178 +If the downlink payload=330100, it means set end node to use confirm mode, while type code is 33.
1179 +
1180 +* Example 1: Downlink Payload: 330100 ~/~/ Set AT+SETMAXNBTRANS=1,0
1181 +* Example 2: Downlink Payload: 330201 ~/~/ Set AT+SETMAXNBTRANS=2,1
1182 +
1183 +== 7.25 Device offline rejoining （LWS007) ==
1184 +
1185 +{{info}}
1186 +**AT Command: AT+DDETECT**
1187 +{{/info}}
1188 +
1189 +(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
1190 +|=(% colspan="3" style="width: 707px;" %)AT+**DDETECT**
1191 +|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
1192 +|(% style="width:160px" %)(((
1193 +AT+DDETECT=1,1440,2880
1194 +
1195 +value1
1196 +)))|(% style="width:198px" %)Enable online detect|(% style="width:349px" %)(((
1197 +1
1198 +
1199 +OK
1200 +)))
1201 +|(% style="width:160px" %)(((
1202 +AT+DDETECT=1,?,2880
1203 +
1204 +value2
1205 +)))|(% style="width:198px" %)Online detection packet sending time|(% style="width:349px" %)(((
1206 +
1207 +
1208 +OK
1209 +)))
1210 +|(% style="width:160px" %)(((
1211 +AT+DDETECT=1,1440,？
1212 +
1213 +value3
1214 +)))|(% style="width:198px" %)Process rejoin|(% style="width:349px" %)(((
1215 +
1216 +
1217 +OK
1218 +)))
1219 +
1220 +{{info}}
1221 +**Downlink Command: 0x33**
1222 +{{/info}}
1223 +
1224 +Format: Command Code (0x32) followed by 2 bytes mode value.
1225 +
1226 +If the downlink payload=320105A00B40, it means set end node to use confirm mode, while type code is 33.
1227 +
1228 +* Example 1: Downlink Payload: 320105A00B40 ~/~/ Set AT+DDETECT=1,1440,2880
1229 +
1230 +== 7.26 Request the server to send an ACK ==
1231 +
1232 +{{info}}
1233 +**AT Command: AT+PNACKMD**
1234 +{{/info}}
1235 +
1236 +(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1237 +|=(% colspan="3" style="width: 533px;" %)**AT+PNACKMD**
1238 +|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1239 +|(% style="width:160px" %)**AT+PNACKMD=1**|(% style="width:263px" %)If the node uploads the ACK as confirm, it will request the server to send an ACK. If the server ack is not received, the node will upload the packets that have not received the ACK the next time it receives the ACK|(% style="width:109px" %)1(((
1240 +OK
1241 +)))
1242 +|(% style="width:160px" %)**AT+PNACKMD=0**|(% style="width:263px" %)off request the server to send an ACK|(% style="width:109px" %)(((
1243 +0
1244 +
1245 +OK
1246 +)))
1247 +
1248 +== 7.27 Adjust network rejoining interval ==
1249 +
1250 +{{info}}
1251 +**AT Command: AT+RJTDC**
1252 +{{/info}}
1253 +
1254 +(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
1255 +|=(% colspan="3" style="width: 724px;" %)AT+RJTDC
1256 +|(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
1257 +|(% style="width:165px" %)AT+RJTDC=?|(% style="width:227px" %)Show the ReJoin data transmission interval in min|(% style="width:329px" %)30000(((
1258 +OK
1259 +
1260 +the interval is 30000ms = 30s
1261 +)))
1262 +|(% style="width:165px" %)AT+RJTDC=60000|(% style="width:227px" %)Set the ReJoin data transmission interval in min|(% style="width:329px" %)OK(((
1263 +Set the ReJoin data transmission interval to 60000ms = 60 seconds
1264 +)))
1265 +
1266 +{{info}}
1267 +**Downlink Command: 0x26**
1268 +{{/info}}
1269 +
1270 +Format: Command Code (0x26) followed by 2 bytes mode value.
1271 +
1272 +If the downlink payload=26000A, it means set end node to use confirm mode, while type code is 26.
1273 +
1274 +* Example 1: Downlink Payload: 26000A ~/~/ Set AT+RJTDC=10
1275 +* Example 2: Downlink Payload: 260002 ~/~/ Set AT+RJTDC=2
1276 +
1107 1107  = 8. AT Commands Combination =
1108 1108  
1109 1109  == 8.1 Set a fix RX2DR for downlink window ==
... ... @@ -1122,3 +1122,4 @@
1122 1122  * AT+ADR=0  [[Reference>>||anchor="H7.1AdaptiveDataRate"]]
1123 1123  * AT+DR=5  [[Reference>>||anchor="H7.4DataRate"]]
1124 1124  * AT+TXP=0  [[Reference>>||anchor="H7.14TransmitPower"]]
1295 +~)~)~)

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0