Last modified by kai on 2024/09/06 10:00
<
From version < 38.109 >
edited by Xiaoling
on 2022/06/01 11:55
To version < 50.5 >
edited by Xiaoling
on 2022/07/13 12:01
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,4 +1,4 @@
1 - **Contents：**
1 + **Table of** **Contents：**
2 2  
3 3  {{toc/}}
4 4  
... ... @@ -6,6 +6,7 @@
6 6  
7 7  = 1. Introduction =
8 8  
9 +
9 9  Dragino LoRaWAN End Node support two types of AT Commands and Downlink Commands:
10 10  
11 11  * **Common Commands:** They should be available for each sensor, such as: change uplink interval, reset device.
... ... @@ -18,6 +18,7 @@
18 18  
19 19  = 2. How to use AT Commands or Downlink command =
20 20  
22 +
21 21  * For AT Command , See Devices User Manual for Device. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
22 22  * For LoRaWAN Downlink: The gateway transfer downlink command in HEX format. This page shows the HEX format downlink code for each command. but some servers use base64 as downlink code. Below are reference for how to use downlink command:
23 23  ** Use HEX format to send a downlink: [[TTN v3>>Notes for TTN]]
... ... @@ -28,6 +28,7 @@
28 28  
29 29  = 3. Support End Node and firmware version =
30 30  
33 +
31 31  (% border="1" style="background-color:#ffffcc; color:green; width:966px" %)
32 32  |=(% colspan="3" style="width: 963px;" %)(((
33 33  Dragino STM32 base hardware Firmware / LoRaWAN stack list
... ... @@ -103,14 +103,13 @@
103 103  
104 104  = 4. System Management Commands =
105 105  
109 +
106 106  == 4.1 Change Uplink Interval ==
107 107  
112 +
108 108  Feature: Change LoRaWAN End Node Transmit Interval.
109 109  
110 -(% class="box infomessage" %)
111 -(((
112 -**AT Command: AT+TDC**
113 -)))
115 +(% style="color:blue" %)**AT Command: AT+TDC**
114 114  
115 115  (% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
116 116  |=(% colspan="3" style="width: 724px;" %)AT+TDC
... ... @@ -124,11 +124,11 @@
124 124  Set transmit interval to 60000ms = 60 seconds
125 125  )))
126 126  
127 -{{info}}
128 -**Downlink Command: 0x01**
129 -{{/info}}
130 -
131 131  (((
130 +
131 +
132 +(% style="color:blue" %)**Downlink Command: 0x01**
133 +
132 132  Format: Command Code (0x01) followed by 3 bytes time value.
133 133  )))
134 134  
... ... @@ -143,12 +143,13 @@
143 143  
144 144  == 4.2 Reboot End Node ==
145 145  
148 +
146 146  Feature: Reboot End Node to perform a new OTAA or ABP Join.
147 147  
148 -{{info}}
149 -**AT Command: ATZ**
150 -{{/info}}
151 151  
152 +(% style="color:blue" %)**AT Command: ATZ**
153 +
154 +
152 152  (% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
153 153  |=(% colspan="3" %)ATZ: Trig a reset of the MCU
154 154  |**Command Example**|**Function**|**Response**
... ... @@ -166,10 +166,10 @@
166 166  <followed by the Tx and Rx information>
167 167  )))
168 168  
169 -{{info}}
170 -**Downlink Command: 0x04**
171 -{{/info}}
172 172  
173 +(% style="color:blue" %)**Downlink Command: 0x04**
174 +
175 +
173 173  (((
174 174  Format: Command Code (0x04) followed by FF.
175 175  )))
... ... @@ -182,11 +182,10 @@
182 182  
183 183  == 4.3 Reset to factory Default ==
184 184  
188 +
185 185  Feature: Reset the parameters to Factory Default, factory default value depends on the firmware settings, the OTAA and ABP keys will reserve after this command.
186 186  
187 -{{info}}
188 -**AT Command: AT+FDR**
189 -{{/info}}
191 +(% style="color:blue" %)**AT Command: AT+FDR**
190 190  
191 191  (% border="1" style="background-color:#ffffcc; color:green; width:831.222px" %)
192 192  |=(% colspan="3" style="width: 828px;" %)Reset to factory default
... ... @@ -205,10 +205,10 @@
205 205  Please set the parameters or reset Device to apply change
206 206  )))
207 207  
208 -{{info}}
209 -**Downlink Command: 0x04**
210 -{{/info}}
211 211  
211 +(% style="color:blue" %)**Downlink Command: 0x04**
212 +
213 +
212 212  (((
213 213  Format: Command Code (0x04) followed by FE.
214 214  )))
... ... @@ -222,10 +222,10 @@
222 222  
223 223  Feature: Show firmware version. No downlink command yet.
224 224  
225 -{{info}}
226 -**AT Command: AT+VER**
227 -{{/info}}
228 228  
228 +(% style="color:blue" %)**AT Command: AT+VER**
229 +
230 +
229 229  (% border="1" style="background-color:#ffffcc; color:green; width:586px" %)
230 230  |=(% colspan="3" style="width: 583px;" %)AT+VER: Image Version and Frequency Band
231 231  |(% style="width:170px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:113px" %)**Response**
... ... @@ -235,10 +235,10 @@
235 235  OK
236 236  )))
237 237  
238 -{{info}}
239 -**Downlink Command: 0x26 (Valid in 006 stack)**
240 -{{/info}}
241 241  
241 +(% style="color:blue" %)**Downlink Command: 0x26 (Valid in 006 stack)**
242 +
243 +
242 242  (((
243 243  Downlink Format: 0x26
244 244  )))
... ... @@ -281,10 +281,10 @@
281 281  
282 282  Feature: Show All configure. No downlink command yet.
283 283  
284 -{{info}}
285 -**AT Command: AT+CFG**
286 -{{/info}}
287 287  
287 +(% style="color:blue" %)**AT Command: AT+CFG**
288 +
289 +
288 288  (% border="1" style="background-color:#ffffcc; color:green; width:599.222px" %)
289 289  |=(% colspan="3" style="width: 596px;" %)AT+CFG: Print all configurations
290 290  |(% style="width:160px" %)**Command Example**|(% style="width:154px" %)**Function**|(% style="width:280px" %)**Response**
... ... @@ -302,8 +302,6 @@
302 302  OK
303 303  )))
304 304  
305 -
306 -
307 307  = 5. Keys, IDs and EUIs management =
308 308  
309 309  == 5.1 Application EUI ==
... ... @@ -310,10 +310,10 @@
310 310  
311 311  Feature: Get or Set the Application EUI.
312 312  
313 -{{info}}
314 -**AT Command: AT+APPEUI**
315 -{{/info}}
316 316  
314 +(% style="color:blue" %)**AT Command: AT+APPEUI**
315 +
316 +
317 317  (% border="1" style="background-color:#ffffcc; color:green; width:686.222px" %)
318 318  |=(% colspan="3" style="width: 683px;" %)AT+APPEUI
319 319  |(% style="width:305px" %)**Command Example**|(% style="width:186px" %)**Function**|(% style="width:191px" %)**Response**
... ... @@ -322,16 +322,14 @@
322 322  )))
323 323  |(% style="width:305px" %)AT+APPEUI=00 b3 d5 7e f0 00 4d 34|(% style="width:186px" %)Set the Application EUI|(% style="width:191px" %)OK
324 324  
325 -
326 -
327 327  == 5.2 Application Key ==
328 328  
329 329  Feature: Get or Set the Application Key.
330 330  
331 -{{info}}
332 -**AT Command: AT+APPKEY**
333 -{{/info}}
334 334  
330 +(% style="color:blue" %)**AT Command: AT+APPKEY**
331 +
332 +
335 335  (% border="1" style="background-color:#ffffcc; color:green; width:976.222px" %)
336 336  |=(% colspan="3" style="width: 973px;" %)AT+APPKEY
337 337  |(% style="width:441px" %)**Command Example**|(% style="width:180px" %)**Function**|(% style="width:350px" %)**Response**
... ... @@ -340,16 +340,14 @@
340 340  )))
341 341  |(% style="width:441px" %)AT+APPKEY=00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35|(% style="width:180px" %)Set the Application Key|(% style="width:350px" %)OK
342 342  
343 -
344 -
345 345  == 5.3 Application Session Key ==
346 346  
347 347  Feature: Get or Set the Application Session Key.
348 348  
349 -{{info}}
350 -**AT Command: AT+APPSKEY**
351 -{{/info}}
352 352  
346 +(% style="color:blue" %)**AT Command: AT+APPSKEY**
347 +
348 +
353 353  (% border="1" style="background-color:#ffffcc; color:green; width:1040.22px" %)
354 354  |=(% colspan="3" style="width: 1037px;" %)AT+APPSKEY
355 355  |(% style="width:451px" %)**Command Example**|(% style="width:231px" %)**Function**|(% style="width:354px" %)**Response**
... ... @@ -360,16 +360,14 @@
360 360  OK
361 361  )))
362 362  
363 -
364 -
365 365  == 5.4 Device Address ==
366 366  
367 367  Feature: Get or Set the Device Address.
368 368  
369 -{{info}}
370 -**AT Command: AT+DADDR**
371 -{{/info}}
372 372  
364 +(% style="color:blue" %)**AT Command: AT+DADDR**
365 +
366 +
373 373  (% border="1" style="background-color:#ffffcc; color:green; width:795.222px" %)
374 374  |=(% colspan="3" style="width: 792px;" %)AT+DADDR
375 375  |(% style="width:192px" %)**Command Example**|(% style="width:241px" %)**Function**|(% style="width:359px" %)**Response**
... ... @@ -380,16 +380,14 @@
380 380  )))
381 381  |(% style="width:192px" %)AT+DADDR=A8 40 41 FF|(% style="width:241px" %)Set the Application Session Key.|(% style="width:359px" %)OK
382 382  
383 -
384 -
385 385  == 5.5 Device EUI ==
386 386  
387 387  Feature: Get or Set the Device EUI.
388 388  
389 -{{info}}
390 -**AT Command: AT+DEUI**
391 -{{/info}}
392 392  
382 +(% style="color:blue" %)**AT Command: AT+DEUI**
383 +
384 +
393 393  (% border="1" style="background-color:#ffffcc; color:green; width:1035.22px" %)
394 394  |=(% colspan="3" style="width: 1032px;" %)AT+DEUI
395 395  |(% style="width:250px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:634px" %)**Response**
... ... @@ -404,10 +404,10 @@
404 404  
405 405  Feature: Get or Set the Network ID.(You can enter this command change only after successful network connection)
406 406  
407 -{{info}}
408 -**AT Command: AT+NWKID**
409 -{{/info}}
410 410  
400 +(% style="color:blue" %)**AT Command: AT+NWKID**
401 +
402 +
411 411  (% border="1" style="background-color:#ffffcc; color:green; width:448.222px" %)
412 412  |=(% colspan="3" style="width: 445px;" %)AT+NWKID
413 413  |(% style="width:191px" %)**Command Example**|(% style="width:153px" %)**Function**|(% style="width:101px" %)**Response**
... ... @@ -420,10 +420,10 @@
420 420  
421 421  Feature: Get or Set the Network Session Key
422 422  
423 -{{info}}
424 -**AT Command: AT+NWKSKEY**
425 -{{/info}}
426 426  
416 +(% style="color:blue" %)**AT Command: AT+NWKSKEY**
417 +
418 +
427 427  (% border="1" style="background-color:#ffffcc; color:green; width:1017.22px" %)
428 428  |=(% colspan="3" style="width: 1014px;" %)AT+NWKSKEY
429 429  |(% style="width:455px" %)**Command Example**|(% style="width:215px" %)**Function**|(% style="width:343px" %)**Response**
... ... @@ -436,12 +436,14 @@
436 436  
437 437  == 6.1 Confirm Mode ==
438 438  
431 +=== AT+CFM command before DR-LWS007 software stack ===
432 +
439 439  Feature: Get or Set the confirmation mode (0-1).
440 440  
441 -{{info}}
442 -**AT Command: AT+CFM**
443 -{{/info}}
444 444  
436 +(% style="color:blue" %)**AT Command: AT+CFM**
437 +
438 +
445 445  (% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
446 446  |=(% colspan="3" style="width: 707px;" %)AT+CFM
447 447  |(% style="width:155px" %)**Command Example**|(% style="width:205px" %)**Function**|(% style="width:346px" %)**Response**
... ... @@ -451,7 +451,7 @@
451 451  |(% style="width:155px" %)AT+CFM=1|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)OK
452 452  |(% style="width:155px" %)AT+CFM=2|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)While Error in format, return AT_PARAM_ERROR
453 453  
454 -Downlink Command: 0x05
448 +(% style="color:blue" %)**Downlink Command: 0x05**
455 455  
456 456  Format: Command Code (0x05) followed by 2 bytes mode value.
457 457  
... ... @@ -460,14 +460,62 @@
460 460  * Example 1: Downlink Payload: 0501 ~/~/ Set AT+CFM=1
461 461  * Example 2: Downlink Payload: 0500 ~/~/ Set AT+CFM=0
462 462  
457 +=== AT+CFM command since DR-LWS007 software stack ===
458 +
459 +
460 +(% style="color:blue" %)**AT Command: AT+CFM**
461 +
462 +
463 +(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
464 +|=(% colspan="3" style="width: 707px;" %)AT+CFM
465 +|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
466 +|(% style="width:160px" %)(((
467 +AT+CFM=1,0,0
468 +
469 +value1
470 +)))|(% style="width:198px" %)confirmed uplink|(% style="width:349px" %)(((
471 +1
472 +
473 +OK
474 +)))
475 +|(% style="width:160px" %)(((
476 +AT+CFM=0,?,0
477 +
478 +value2
479 +)))|(% style="width:198px" %)set max retry , range: 0 ~~ 7|(% style="width:349px" %)(((
480 +0~~7
481 +
482 +OK
483 +)))
484 +|(% style="width:160px" %)(((
485 +AT+CFM=0,0,1
486 +
487 +value3
488 +)))|(% style="width:198px" %)uplink fcnt increase by 1 for each retry|(% style="width:349px" %)(((
489 +1
490 +
491 +OK
492 +)))
493 +
494 +
495 +(% style="color:blue" %)**Downlink Command: 0x05**
496 +
497 +
498 +Format: Command Code (0x05) followed by 2 bytes mode value.
499 +
500 +If the downlink payload=05010101, it means set end node to use confirm mode, while type code is 05.
501 +
502 +* Example 1: Downlink Payload: 05010101 ~/~/ Set AT+CFM=1,1,1
503 +* Example 2: Downlink Payload: 05000700 ~/~/ Set AT+CFM=0,7,0
504 +
463 463  == 6.2 Confirm Status ==
464 464  
465 465  Feature: Get confirmation status of the last AT+SEND (0-1).
466 466  
467 -{{info}}
468 -**AT Command: AT+CFS**
469 -{{/info}}
470 470  
510 +(% style="color:blue" %)**AT Command: AT+CFS**
511 +
512 +
471 471  (% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
472 472  |=(% colspan="3" style="width: 531px;" %)AT+CFS
473 473  |(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:178px" %)**Response**
... ... @@ -479,10 +479,10 @@
479 479  
480 480  Feature: Join network.
481 481  
482 -{{info}}
483 -**AT Command: AT+JOIN**
484 -{{/info}}
485 485  
525 +(% style="color:blue" %)**AT Command: AT+JOIN**
526 +
527 +
486 486  (% border="1" style="background-color:#ffffcc; color:green; width:647.222px" %)
487 487  |=(% colspan="3" style="width: 644px;" %)AT+JOIN
488 488  |(% style="width:163px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:334px" %)**Response**
... ... @@ -496,10 +496,10 @@
496 496  
497 497  Feature: Get or Set the Network Join Mode. (0: ABP, 1: OTAA).
498 498  
499 -{{info}}
500 -**AT Command: AT+NJM**
501 -{{/info}}
502 502  
542 +(% style="color:blue" %)**AT Command: AT+NJM**
543 +
544 +
503 503  (% border="1" style="background-color:#ffffcc; color:green; width:753.222px" %)
504 504  |=(% colspan="3" style="width: 750px;" %)AT+NJM
505 505  |(% style="width:162px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:361px" %)**Response**
... ... @@ -509,15 +509,15 @@
509 509  |(% style="width:162px" %)AT+NJM=0|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)OK
510 510  |(% style="width:162px" %)AT+NJM=2|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)While Error in format, return AT_PARAM_ERROR
511 511  
512 -{{info}}
513 -**Downlink Command: 0x20**
514 -{{/info}}
515 515  
555 +(% style="color:blue" %)**Downlink Command: 0x20**
556 +
557 +
516 516  Format: Command Code (0x20) followed by 1 bytes mode value.
517 517  
518 518  If the downlink payload=2000, it means set the Network Join Mode, while type code is 20.
519 519  
520 -* **Example 1: **Downlink Payload: **2000** ~/~/ Set AT+NJM=O
562 +* **Example 1: **Downlink Payload: **2000** ~/~/ Set AT+NJM=0
521 521  * **Example 2:** Downlink Payload: **2001** ~/~/ Set AT+NJM=1
522 522  
523 523  == 6.5 LoRa® Network Join Status ==
... ... @@ -524,10 +524,10 @@
524 524  
525 525  Feature: LoRa® Network Join Status.
526 526  
527 -{{info}}
528 -**AT Command: AT+NJS**
529 -{{/info}}
530 530  
570 +(% style="color:blue" %)**AT Command: AT+NJS**
571 +
572 +
531 531  (% border="1" style="background-color:#ffffcc; color:green; width:498.222px" %)
532 532  |=(% colspan="3" style="width: 495px;" %)AT+NJS
533 533  |(% style="width:169px" %)**Command Example**|(% style="width:164px" %)**Function**|(% style="width:161px" %)**Response**
... ... @@ -539,10 +539,10 @@
539 539  
540 540  Feature: Print Last Received Data in Raw Format<port:data>.
541 541  
542 -{{info}}
543 -**AT Command: AT+RECV**
544 -{{/info}}
545 545  
585 +(% style="color:blue" %)**AT Command: AT+RECV**
586 +
587 +
546 546  (% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
547 547  |=(% colspan="3" style="width: 584px;" %)AT+RECV
548 548  |(% style="width:161px" %)**Command Example**|(% style="width:272px" %)**Function**|(% style="width:150px" %)**Response**
... ... @@ -554,10 +554,10 @@
554 554  
555 555  Feature: Print Last Received Data in Binary Format<port:data>.
556 556  
557 -{{info}}
558 -**AT Command: AT+RECVB**
559 -{{/info}}
560 560  
600 +(% style="color:blue" %)**AT Command: AT+RECVB**
601 +
602 +
561 561  (% border="1" style="background-color:#ffffcc; color:green; width:793.222px" %)
562 562  |=(% colspan="3" style="width: 790px;" %)AT+RECVB
563 563  |(% style="width:173px" %)**Command Example**|(% style="width:497px" %)**Function**|(% style="width:120px" %)**Response**
... ... @@ -569,10 +569,10 @@
569 569  
570 570  Feature: Send Text Data<port:data>.
571 571  
572 -{{info}}
573 -**AT Command: AT+SEND**
574 -{{/info}}
575 575  
615 +(% style="color:blue" %)**AT Command: AT+SEND**
616 +
617 +
576 576  (% border="1" style="background-color:#ffffcc; color:green; width:991.222px" %)
577 577  |=(% colspan="3" style="width: 988px;" %)AT+SEND
578 578  |(% style="width:201px" %)**Command Example**|(% style="width:340px" %)**Function**|(% style="width:446px" %)**Response**
... ... @@ -588,10 +588,10 @@
588 588  
589 589  Feature: Send hexadecimal data along with the application port.
590 590  
591 -{{info}}
592 -**AT Command: AT+SENDB**
593 -{{/info}}
594 594  
634 +(% style="color:blue" %)**AT Command: AT+SENDB**
635 +
636 +
595 595  (% border="1" style="background-color:#ffffcc; color:green; width:1120.22px" %)
596 596  |=(% colspan="3" style="width: 1117px;" %)AT+SENDB
597 597  |(% style="width:257px" %)**Command Example**|(% style="width:406px" %)**Function**|(% style="width:453px" %)**Response**
... ... @@ -608,10 +608,10 @@
608 608  
609 609  Feature: Get or Set the Adaptive Data Rate setting. (0: off, 1: on).
610 610  
611 -{{info}}
612 -**AT Command: AT+ADR**
613 -{{/info}}
614 614  
654 +(% style="color:blue" %)**AT Command: AT+ADR**
655 +
656 +
615 615  (% border="1" style="background-color:#ffffcc; color:green; width:683.222px" %)
616 616  |=(% colspan="3" style="width: 680px;" %)AT+ADR
617 617  |(% style="width:162px" %)**Command Example**|(% style="width:266px" %)**Function**|(% style="width:250px" %)**Response**
... ... @@ -623,11 +623,11 @@
623 623  AT_PARAM_ERROR
624 624  )))
625 625  
626 -{{info}}
627 -**Downlink Command: 0x22**
628 -{{/info}}
629 629  
669 +(% style="color:blue" %)**Downlink Command: 0x22**
630 630  
671 +
672 +
631 631  If the downlink payload=2201, it means setting the adaptive data rate to 1, while type code is 22.
632 632  
633 633  * **Example 1**: Downlink Payload: **2201** ~/~/ Set AT+ADR=1.
... ... @@ -637,10 +637,10 @@
637 637  
638 638  Feature: Get or Set the Device Class(Currently only support class A, class C).
639 639  
640 -{{info}}
641 -**AT Command:AT+CLASS**
642 -{{/info}}
643 643  
683 +(% style="color:blue" %)**AT Command:AT+CLASS**
684 +
685 +
644 644  (% border="1" style="background-color:#ffffcc; color:green; width:507.222px" %)
645 645  |=(% colspan="3" style="width: 504px;" %)AT+CLASS
646 646  |(% style="width:163px" %)**Command Example**|(% style="width:166px" %)**Function**|(% style="width:175px" %)**Response**
... ... @@ -655,10 +655,10 @@
655 655  
656 656  Feature: Get or Set the ETSI Duty Cycle setting - 0=disable, 1=enable - Only for testing.
657 657  
658 -{{info}}
659 -**AT Command:AT+DCS**
660 -{{/info}}
661 661  
701 +(% style="color:blue" %)**AT Command:AT+DCS**
702 +
703 +
662 662  (% border="1" style="background-color:#ffffcc; color:green; width:515.222px" %)
663 663  |=(% colspan="3" style="width: 512px;" %)AT+DCS
664 664  |(% style="width:165px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:107px" %)**Response**
... ... @@ -673,10 +673,10 @@
673 673  
674 674  Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) . Note: while set Data Rate, please use set Adptive Data Rate, ADR=0 first. otherwise device will response to server's ADR command and change the DR to the setting from server
675 675  
676 -{{info}}
677 -**AT Command: AT+DR**
678 -{{/info}}
679 679  
719 +(% style="color:blue" %)**AT Command: AT+DR**
720 +
721 +
680 680  (% border="1" style="background-color:#ffffcc; color:green; width:466.222px" %)
681 681  |=(% colspan="3" style="width: 463px;" %)AT+DR
682 682  |(% style="width:156px" %)**Command Example**|(% style="width:167px" %)**Function**|(% style="width:140px" %)**Response**
... ... @@ -687,11 +687,11 @@
687 687  
688 688  )))
689 689  
690 -{{info}}
691 -**Downlink Command: 0x2200aaFF**
692 -{{/info}}
693 693  
733 +(% style="color:blue" %)**Downlink Command: 0x2200aaFF**
694 694  
735 +
736 +
695 695  If the downlink payload=220001FF, it means setting the data rate to 1, while type code is 22 00 aa FF.
696 696  
697 697  * **Example 1**: Downlink Payload: **220001FF** ~/~/ Set AT+DR=1.
... ... @@ -701,10 +701,10 @@
701 701  
702 702  Feature: Get or Set the Frame Counter Downlink.
703 703  
704 -{{info}}
705 -**AT Command:AT+FCD**
706 -{{/info}}
707 707  
747 +(% style="color:blue" %)**AT Command:AT+FCD**
748 +
749 +
708 708  (% border="1" style="background-color:#ffffcc; color:green; width:693.222px" %)
709 709  |=(% colspan="3" style="width: 690px;" %)AT+FCD
710 710  |(% style="width:162px" %)**Command Example**|(% style="width:258px" %)**Function**|(% style="width:269px" %)**Response**
... ... @@ -721,10 +721,10 @@
721 721  
722 722  Feature: Get or Set the Frame Counter Uplink.
723 723  
724 -{{info}}
725 -**AT Command:AT+FCU**
726 -{{/info}}
727 727  
767 +(% style="color:blue" %)**AT Command:AT+FCU**
768 +
769 +
728 728  (% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
729 729  |=(% colspan="3" style="width: 531px;" %)AT+FCU
730 730  |(% style="width:177px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:113px" %)**Response**
... ... @@ -739,10 +739,10 @@
739 739  
740 740  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 1 in ms.
741 741  
742 -{{info}}
743 -**AT Command:AT+JN1DL**
744 -{{/info}}
745 745  
785 +(% style="color:blue" %)**AT Command:AT+JN1DL**
786 +
787 +
746 746  (% border="1" style="background-color:#ffffcc; color:green; width:537.222px" %)
747 747  |=(% colspan="3" style="width: 534px;" %)AT+JN1DL
748 748  |(% style="width:164px" %)**Command Example**|(% style="width:229px" %)**Function**|(% style="width:140px" %)**Response**
... ... @@ -757,10 +757,10 @@
757 757  
758 758  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 2 in ms.
759 759  
760 -{{info}}
761 -**AT Command:AT+JN2DL**
762 -{{/info}}
763 763  
803 +(% style="color:blue" %)**AT Command:AT+JN2DL**
804 +
805 +
764 764  (% border="1" style="background-color:#ffffcc; color:green; width:538.222px" %)
765 765  |=(% colspan="3" style="width: 535px;" %)AT+JN2DL
766 766  |(% style="width:160px" %)**Command Example**|(% style="width:228px" %)**Function**|(% style="width:146px" %)**Response**
... ... @@ -773,12 +773,14 @@
773 773  
774 774  == 7.9 Public Network Mode ==
775 775  
776 -Feature: Get or Set the public network mode. (0: off, 1: on)
818 +Feature: Get or Set the public network mode. (0: off, 1: on). A Public LoRaWAN network use 0x34 as syncword. Default Settings; PNM=1
777 777  
778 -{{info}}
779 -**AT Command:AT+PNM**
780 -{{/info}}
820 +Notice: If user build their own LoRaWAN server but still use syncword=0x34, this is still considered a public LoRaWAN network
781 781  
822 +
823 +(% style="color:blue" %)**AT Command:AT+PNM**
824 +
825 +
782 782  (% border="1" style="background-color:#ffffcc; color:green; width:667.222px" %)
783 783  |=(% colspan="3" style="width: 664px;" %)AT+PNM
784 784  |(% style="width:166px" %)**Command Example**|(% style="width:225px" %)**Function**|(% style="width:272px" %)**Response**
... ... @@ -785,20 +785,25 @@
785 785  |(% style="width:166px" %)AT+PNM=?|(% style="width:225px" %)Get the public network mode.|(% style="width:272px" %)1(((
786 786  OK
787 787  )))
788 -|(% style="width:166px" %)AT+PNM=1|(% style="width:225px" %)Set the public network mode.|(% style="width:272px" %)(System will write new value to PNM)(((
832 +|(% style="width:166px" %)AT+PNM=1|(% style="width:225px" %)(((
833 +Set the public network mode.
834 +
835 +Set syncword=0x34
836 +)))|(% style="width:272px" %)(System will write new value to PNM)(((
789 789  OK
790 790  
791 791  
792 792  )))
841 +|(% style="width:166px" %)AT+PNM=0|(% style="width:225px" %)Set to use private network autoset syncword=0x12|(% style="width:272px" %)
793 793  
794 794  == 7.10 Receive Delay1 ==
795 795  
796 796  Feature: Get or Set the delay between the end of the Tx and the Rx Window 1 in ms
797 797  
798 -{{info}}
799 -**AT Command:AT+RX1DL**
800 -{{/info}}
801 801  
848 +(% style="color:blue" %)**AT Command:AT+RX1DL**
849 +
850 +
802 802  (% border="1" style="background-color:#ffffcc; color:green; width:408.222px" %)
803 803  |=(% colspan="3" style="width: 405px;" %)AT+RX1DL
804 804  |(% style="width:155px" %)**Command Example**|(% style="width:128px" %)**Function**|(% style="width:122px" %)**Response**
... ... @@ -813,10 +813,10 @@
813 813  
814 814  Feature: Get or Set the delay between the end of the Tx and the Rx Window 2 in ms
815 815  
816 -{{info}}
817 -**AT Command:AT+RX2DL**
818 -{{/info}}
819 819  
866 +(% style="color:blue" %)**AT Command:AT+RX2DL**
867 +
868 +
820 820  (% border="1" style="background-color:#ffffcc; color:green; width:481.222px" %)
821 821  |=(% colspan="3" style="width: 478px;" %)AT+RX2DL
822 822  |(% style="width:175px" %)**Command Example**|(% style="width:152px" %)**Function**|(% style="width:150px" %)**Response**
... ... @@ -831,10 +831,10 @@
831 831  
832 832  Feature: Get or Set the Rx2 window data rate (0-7 corresponding to DR_X)
833 833  
834 -{{info}}
835 -**AT Command:AT+RX2DR**
836 -{{/info}}
837 837  
884 +(% style="color:blue" %)**AT Command:AT+RX2DR**
885 +
886 +
838 838  (% border="1" style="background-color:#ffffcc; color:green; width:525.222px" %)
839 839  |=(% colspan="3" style="width: 522px;" %)AT+RX2DR
840 840  |(% style="width:160px" %)**Command Example**|(% style="width:232px" %)**Function**|(% style="width:130px" %)**Response**
... ... @@ -849,10 +849,10 @@
849 849  
850 850  Feature: Get or Set the Rx2 window frequency
851 851  
852 -{{info}}
853 -**AT Command:AT+RX2FQ**
854 -{{/info}}
855 855  
902 +(% style="color:blue" %)**AT Command:AT+RX2FQ**
903 +
904 +
856 856  (% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
857 857  |=(% colspan="3" style="width: 584px;" %)AT+RX2FQ
858 858  |(% style="width:183px" %)**Command Example**|(% style="width:240px" %)**Function**|(% style="width:160px" %)**Response**
... ... @@ -867,10 +867,10 @@
867 867  
868 868  Feature: Get or Set the Transmit Power(0-5, MAX:0, MIN:5, according to LoRaWAN Spec, or 40=10dB, 41 = 11dB, …, 50 = 20dB which is out of LoRaWAN spec. )
869 869  
870 -{{info}}
871 -**AT Command:AT+TXP**
872 -{{/info}}
873 873  
920 +(% style="color:blue" %)**AT Command:AT+TXP**
921 +
922 +
874 874  (% border="1" style="background-color:#ffffcc; color:green; width:465.222px" %)
875 875  |=(% colspan="3" style="width: 462px;" %)AT+TXP
876 876  |(% style="width:161px" %)**Command Example**|(% style="width:189px" %)**Function**|(% style="width:112px" %)**Response**
... ... @@ -892,10 +892,10 @@
892 892  
893 893  Feature: Get or Set the Rx2 window frequency
894 894  
895 -{{info}}
896 -**AT Command:AT+RSSI**
897 -{{/info}}
898 898  
945 +(% style="color:blue" %)**AT Command:AT+RSSI**
946 +
947 +
899 899  (% border="1" style="background-color:#ffffcc; color:green; width:557.222px" %)
900 900  |=(% colspan="3" style="width: 554px;" %)AT+RSSI
901 901  |(% style="width:164px" %)**Command Example**|(% style="width:289px" %)**Function**|(% style="width:100px" %)**Response**
... ... @@ -1102,6 +1102,129 @@
1102 1102  * **Example 1**: Downlink Payload: **2101** ~/~/ set packet receiving response level to 1
1103 1103  * **Example 2**: Downlink Payload: **2102** ~/~/ set packet receiving response level to 2
1104 1104  
1154 +== 7.24 Controls NBTrans in unconfirmed uplink mode（LWS007 NBTrans:Set retransmission packets) ==
1155 +
1156 +{{info}}
1157 +**AT Command: AT+SETMAXNBTRANS **
1158 +{{/info}}
1159 +
1160 +(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1161 +|=(% colspan="3" style="width: 533px;" %)AT+**SETMAXNBTRANS**
1162 +|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1163 +|(% style="width:160px" %)**AT+SETMAXNBTRANS=1，0**|(% style="width:263px" %)Value1: set the maximum NBTrans.|(% style="width:109px" %)1(((
1164 +OK
1165 +)))
1166 +|(% style="width:160px" %)**AT+SETMAXNBTRANS=？，1**|(% style="width:263px" %)value2: 0: uplink fcnt doesn't change for each NBTrans; 1: uplink fcnt increase by 1 for each NBTrans.|(% style="width:109px" %)(((
1167 +1
1168 +
1169 +OK
1170 +)))
1171 +
1172 +{{info}}
1173 +**Downlink Command: 0x33**
1174 +{{/info}}
1175 +
1176 +Format: Command Code (0x33) followed by 2 bytes mode value.
1177 +
1178 +If the downlink payload=330100, it means set end node to use confirm mode, while type code is 33.
1179 +
1180 +* Example 1: Downlink Payload: 330100 ~/~/ Set AT+SETMAXNBTRANS=1,0
1181 +* Example 2: Downlink Payload: 330201 ~/~/ Set AT+SETMAXNBTRANS=2,1
1182 +
1183 +== 7.25 Device offline rejoining （LWS007) ==
1184 +
1185 +{{info}}
1186 +**AT Command: AT+DDETECT**
1187 +{{/info}}
1188 +
1189 +(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
1190 +|=(% colspan="3" style="width: 707px;" %)AT+**DDETECT**
1191 +|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
1192 +|(% style="width:160px" %)(((
1193 +AT+DDETECT=1,1440,2880
1194 +
1195 +value1
1196 +)))|(% style="width:198px" %)Enable online detect|(% style="width:349px" %)(((
1197 +1
1198 +
1199 +OK
1200 +)))
1201 +|(% style="width:160px" %)(((
1202 +AT+DDETECT=1,?,2880
1203 +
1204 +value2
1205 +)))|(% style="width:198px" %)Online detection packet sending time|(% style="width:349px" %)(((
1206 +
1207 +
1208 +OK
1209 +)))
1210 +|(% style="width:160px" %)(((
1211 +AT+DDETECT=1,1440,？
1212 +
1213 +value3
1214 +)))|(% style="width:198px" %)Process rejoin|(% style="width:349px" %)(((
1215 +
1216 +
1217 +OK
1218 +)))
1219 +
1220 +{{info}}
1221 +**Downlink Command: 0x33**
1222 +{{/info}}
1223 +
1224 +Format: Command Code (0x32) followed by 2 bytes mode value.
1225 +
1226 +If the downlink payload=320105A00B40, it means set end node to use confirm mode, while type code is 33.
1227 +
1228 +* Example 1: Downlink Payload: 320105A00B40 ~/~/ Set AT+DDETECT=1,1440,2880
1229 +
1230 +== 7.26 Request the server to send an ACK ==
1231 +
1232 +{{info}}
1233 +**AT Command: AT+PNACKMD**
1234 +{{/info}}
1235 +
1236 +(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1237 +|=(% colspan="3" style="width: 533px;" %)**AT+PNACKMD**
1238 +|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1239 +|(% style="width:160px" %)**AT+PNACKMD=1**|(% style="width:263px" %)If the node uploads the ACK as confirm, it will request the server to send an ACK. If the server ack is not received, the node will upload the packets that have not received the ACK the next time it receives the ACK|(% style="width:109px" %)1(((
1240 +OK
1241 +)))
1242 +|(% style="width:160px" %)**AT+PNACKMD=0**|(% style="width:263px" %)off request the server to send an ACK|(% style="width:109px" %)(((
1243 +0
1244 +
1245 +OK
1246 +)))
1247 +
1248 +== 7.27 Adjust network rejoining interval ==
1249 +
1250 +{{info}}
1251 +**AT Command: AT+RJTDC**
1252 +{{/info}}
1253 +
1254 +(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
1255 +|=(% colspan="3" style="width: 724px;" %)AT+RJTDC
1256 +|(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
1257 +|(% style="width:165px" %)AT+RJTDC=?|(% style="width:227px" %)Show the ReJoin data transmission interval in min|(% style="width:329px" %)30000(((
1258 +OK
1259 +
1260 +the interval is 30000ms = 30s
1261 +)))
1262 +|(% style="width:165px" %)AT+RJTDC=60000|(% style="width:227px" %)Set the ReJoin data transmission interval in min|(% style="width:329px" %)OK(((
1263 +Set the ReJoin data transmission interval to 60000ms = 60 seconds
1264 +)))
1265 +
1266 +{{info}}
1267 +**Downlink Command: 0x26**
1268 +{{/info}}
1269 +
1270 +Format: Command Code (0x26) followed by 2 bytes mode value.
1271 +
1272 +If the downlink payload=26000A, it means set end node to use confirm mode, while type code is 26.
1273 +
1274 +* Example 1: Downlink Payload: 26000A ~/~/ Set AT+RJTDC=10
1275 +* Example 2: Downlink Payload: 260002 ~/~/ Set AT+RJTDC=2
1276 +
1105 1105  = 8. AT Commands Combination =
1106 1106  
1107 1107  == 8.1 Set a fix RX2DR for downlink window ==
... ... @@ -1120,3 +1120,4 @@
1120 1120  * AT+ADR=0  [[Reference>>||anchor="H7.1AdaptiveDataRate"]]
1121 1121  * AT+DR=5  [[Reference>>||anchor="H7.4DataRate"]]
1122 1122  * AT+TXP=0  [[Reference>>||anchor="H7.14TransmitPower"]]
1295 +~)~)~)

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0