Changes for page End Device AT Commands and Downlink Command
Last modified by kai on 2024/09/06 10:00
Summary
-
Page properties (1 modified, 0 added, 0 removed)
-
Attachments (0 modified, 0 added, 2 removed)
Details
- Page properties
-
- Content
-
... ... @@ -1,9 +1,8 @@ 1 - **Contents：**1 +Contens 2 2 3 3 {{toc/}} 4 4 5 5 6 - 7 7 = 1. Introduction = 8 8 9 9 Dragino LoRaWAN End Node support two types of AT Commands and Downlink Commands: ... ... @@ -11,96 +11,34 @@ 11 11 * **Common Commands:** They should be available for each sensor, such as: change uplink interval, reset device. 12 12 * **Sensor Related Commands:** Only for special sensor, such as control relay, poll RS485 device. 13 13 14 -((( 15 15 **This page shows the common commands since Dragino LoRaWAN stack DR-LWS-005. Make sure the end node support stack higher than DR-LWS-005 before checking this page.** 16 16 17 -))) 18 18 19 19 = 2. How to use AT Commands or Downlink command = 20 20 21 21 * For AT Command , See Devices User Manual for Device. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]] 22 22 * For LoRaWAN Downlink: The gateway transfer downlink command in HEX format. This page shows the HEX format downlink code for each command. but some servers use base64 as downlink code. Below are reference for how to use downlink command: 23 -** Use HEX format to send a downlink: [[TTN v3>>Notes 24 -** Use Base64 format to send a downlink: [[Chirpstack>>Notes 25 -** See use note for more serves [[Servers Note>>doc :Main.WebHome]](IoT LoRaWANServer)20 +** Use HEX format to send a downlink: [[TTN v3>>url:https://wiki.dragino.com/index.php/Notes_for_TTN#Send_Downlink_message]] 21 +** Use Base64 format to send a downlink: [[Chirpstack>>url:https://wiki.dragino.com/index.php/Notes_for_ChirpStack#Downlink]]. 22 +** See use note for more serves [[Servers Note>>url:https://wiki.dragino.com/index.php/Main_Page#Use_Note_for_Server]] 26 26 27 - 28 - 29 29 = 3. Support End Node and firmware version = 30 30 31 -(% border="1" style="background-color:#ffffcc; color:green; width:966px" %) 32 -|=(% colspan="3" style="width: 963px;" %)((( 33 -Dragino STM32 base hardware Firmware / LoRaWAN stack list 34 -))) 35 -|(% style="width:187px" %)((( 36 -**Model** 37 -)))|(% style="width:330px" %)((( 38 -**Description** 39 -)))|(% style="width:445px" %)((( 40 -**Firmware Version <~-~-> Stack Version** 41 -))) 42 -|(% style="width:187px" %)((( 43 -[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]], 44 -)))|(% style="width:330px" %)((( 45 -Open Source Generic LoRaWAN Sensor Node 46 -)))|(% style="width:445px" %)((( 47 -((( 48 -LSN50 v1.6.0 <~-~-> DR-LWS-003; 49 -))) 50 - 51 -((( 52 -((( 26 +(% border="1" style="background-color:#ffffcc; color:green; width:942.222px" %) 27 +|=(% colspan="3" style="width: 939px;" %) Dragino STM32 base hardware Firmware / LoRaWAN stack list 28 +|(% style="width:187px" %)**Model**|(% style="width:306px" %)**Description**|(% style="width:443px" %)**Firmware Version <~-~-> Stack Version** 29 +|(% style="width:187px" %)[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],|(% style="width:306px" %)Open Source Generic LoRaWAN Sensor Node|(% style="width:443px" %)LSN50 v1.6.0 <~-~-> DR-LWS-003;((( 53 53 LSN50 v1.7.0 <~-~-> DR-LWS-005; ~-~-> Support since this version 54 54 ))) 55 -))) 56 -))) 57 -|(% style="width:187px" %)((( 58 -[[LGT92>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/142-lgt-92.html]], 59 -)))|(% style="width:330px" %)((( 60 -LoRaWAN GPS Tracker 61 -)))|(% style="width:445px" %)((( 62 -((( 63 -LGT92 v1.6.3 <~-~-> DR-LWS-003; 64 -))) 65 - 66 -((( 67 -((( 32 +|(% style="width:187px" %)[[LGT92>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/142-lgt-92.html]],|(% style="width:306px" %)LoRaWAN GPS Tracker|(% style="width:443px" %)LGT92 v1.6.3 <~-~-> DR-LWS-003;((( 68 68 LGT92 v1.6.4 <~-~-> DR-LWS-005;~-~-> Support since this version 69 69 ))) 70 -))) 71 -))) 72 -|(% style="width:187px" %)((( 73 -[[LBT1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/165-lbt1.html]], 74 -)))|(% style="width:330px" %)((( 75 -LoRaWAN BLE Indoor Tracker 76 -)))|(% style="width:445px" %)((( 77 -LBT1 v1.0 <~-~-> DR-LWS-005; 78 -))) 79 -|(% style="width:187px" %)((( 80 -[[RS485-LN>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/154-rs485-ln.html]], 81 -)))|(% style="width:330px" %)((( 82 -LoRaWAN RS485 Modbus Converter 83 -)))|(% style="width:445px" %)((( 84 -RS485-LN v1.3 <~-~-> DR-LWS-005; 85 -))) 86 -|(% style="width:187px" %)((( 87 -[[LHT65>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/151-lht65.html]], 88 -)))|(% style="width:330px" %)((( 89 -LoRaWAN Temperature & Humidity Sensor 90 -)))|(% style="width:445px" %)((( 91 -((( 92 -LHT65 v1.7 <~-~-> DR-LWS-003; 93 -))) 94 - 95 -((( 96 -((( 35 +|(% style="width:187px" %)[[LBT1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/165-lbt1.html]],|(% style="width:306px" %)LoRaWAN BLE Indoor Tracker|(% style="width:443px" %)LBT1 v1.0 <~-~-> DR-LWS-005; 36 +|(% style="width:187px" %)[[RS485-LN>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/154-rs485-ln.html]],|(% style="width:306px" %)LoRaWAN RS485 Modbus Converter|(% style="width:443px" %)RS485-LN v1.3 <~-~-> DR-LWS-005; 37 +|(% style="width:187px" %)[[LHT65>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/151-lht65.html]],|(% style="width:306px" %)LoRaWAN Temperature & Humidity Sensor|(% style="width:443px" %)LHT65 v1.7 <~-~-> DR-LWS-003;((( 97 97 LHT65 v1.8.0 <~-~-> DR-LWS-005;~-~-> Support since this version 98 98 ))) 99 -))) 100 -))) 101 101 102 - 103 - 104 104 = 4. System Management Commands = 105 105 106 106 == 4.1 Change Uplink Interval == ... ... @@ -109,11 +109,11 @@ 109 109 110 110 (% class="box infomessage" %) 111 111 ((( 112 - **AT Command: AT+TDC**49 +AT Command: AT+TDC 113 113 ))) 114 114 115 115 (% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %) 116 -|=(% colspan="3" style="width: 724px;" %)AT+TDC 53 +|=(% colspan="3" style="width: 724px;" %) AT+TDC 117 117 |(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response** 118 118 |(% style="width:165px" %)AT+TDC=?|(% style="width:227px" %)Show current transmit Interval|(% style="width:329px" %)30000((( 119 119 OK ... ... @@ -124,35 +124,29 @@ 124 124 Set transmit interval to 60000ms = 60 seconds 125 125 ))) 126 126 127 -{{info}} 128 128 **Downlink Command: 0x01** 129 -{{/info}} 130 130 131 -((( 132 132 Format: Command Code (0x01) followed by 3 bytes time value. 133 -))) 134 134 135 -((( 136 136 If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01. 137 -))) 138 138 139 139 * **Example 1**: Downlink Payload:** 0100001E** ~/~/ Set Transmit Interval (TDC) = 30 seconds 140 140 * **Example 2**: Downlink Payload:** 0100003C** ~/~/ Set Transmit Interval (TDC) = 60 seconds 141 141 142 - 143 - 144 144 == 4.2 Reboot End Node == 145 145 146 146 Feature: Reboot End Node to perform a new OTAA or ABP Join. 147 147 148 148 {{info}} 149 - **AT Command: ATZ**78 +AT Command: ATZ 150 150 {{/info}} 151 151 152 152 (% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %) 153 153 |=(% colspan="3" %)ATZ: Trig a reset of the MCU 154 154 |**Command Example**|**Function**|**Response** 155 -|ATZ|Reset MCU|((( 84 +))) 85 +|ATZ|Reset MCU| 86 +((( 156 156 Device reset and show booting info 157 157 158 158 LSN50 Device/LoRa ST Module ... ... @@ -166,56 +166,35 @@ 166 166 <followed by the Tx and Rx information> 167 167 ))) 168 168 169 -{{info}} 170 -**Downlink Command: 0x04** 171 -{{/info}} 100 +Downlink Command: 0x04 172 172 173 -((( 174 174 Format: Command Code (0x04) followed by FF. 175 -))) 176 176 177 -((( 178 -If the downlink payload=**04FF**, the end node will reboot. 104 +If the downlink payload=04FF, the end node will reboot. 179 179 180 - 181 -))) 182 - 183 183 == 4.3 Reset to factory Default == 184 184 185 185 Feature: Reset the parameters to Factory Default, factory default value depends on the firmware settings, the OTAA and ABP keys will reserve after this command. 186 186 187 -{{info}} 188 -**AT Command: AT+FDR** 189 -{{/info}} 110 +AT Command: AT+FDR 190 190 191 -(% border="1" style="background-color:#ffffcc; color:green; width:831.222px" %) 192 -|=(% colspan="3" style="width: 828px;" %)Reset to factory default 193 -|(% style="width:181px" %)**Command Example**|(% style="width:181px" %)**Function**|(% style="width:465px" %)**Response** 194 -|(% style="width:181px" %)AT+FDR|(% style="width:181px" %)Reset to factory default|(% style="width:465px" %)((( 195 -Device reset to factory default parameters and show booting info 112 +|=(% colspan="3" %)Reset to factory default 113 +|**Command Example**|**Function**|**Response** 114 +|AT+FDR|Reset to factory default|Device reset to factory default parameters and show booting info 196 196 197 -LSN50 Device/LoRa ST Module 198 - 116 +{{{LSN50 Device/LoRa ST Module 199 199 Image Version: XX 200 - 201 201 Frequency Band: XX 202 - 203 203 DevEui= XX XX XX XX XX XX XX XX 204 - 205 205 Please set the parameters or reset Device to apply change 206 - )))121 +}}} 207 207 208 -{{info}} 209 -**Downlink Command: 0x04** 210 -{{/info}} 211 211 212 -((( 124 +Downlink Command: 0x04 125 + 213 213 Format: Command Code (0x04) followed by FE. 214 -))) 215 215 216 -((( 217 -If the downlink payload=**04FE**, Reset Parameters to Factory Default, Keys Reserve. 218 -))) 128 +If the downlink payload=04FE, Reset Parameters to Factory Default, Keys Reserve. 219 219 220 220 221 221 == 4.4 Show Firmware Version == ... ... @@ -222,42 +222,30 @@ 222 222 223 223 Feature: Show firmware version. No downlink command yet. 224 224 225 -{{info}} 226 -**AT Command: AT+VER** 227 -{{/info}} 135 +AT Command: AT+VER 228 228 229 -(% border="1" style="background-color:#ffffcc; color:green; width:586px" %) 230 -|=(% colspan="3" style="width: 583px;" %)AT+VER: Image Version and Frequency Band 231 -|(% style="width:170px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:113px" %)**Response** 232 -|(% style="width:170px" %)AT+VER=?|(% style="width:300px" %)Show Image version and Frequency Band|(% style="width:113px" %)((( 233 -1.3 EU868 137 +|=(% colspan="3" %)AT+VER: Image Version and Frequency Band 138 +|**Command Example**|**Function**|**Response** 139 +|AT+VER=?|Show Image version and Frequency Band| 234 234 141 +{{{1.3 EU868 235 235 OK 236 - )))143 +}}} 237 237 238 -{{info}} 239 -**Downlink Command: 0x26 (Valid in 006 stack)** 240 -{{/info}} 241 241 242 -((( 146 +Downlink Command: 0x26 (Valid in 006 stack) 147 + 243 243 Downlink Format: 0x26 244 -))) 245 245 246 -((( 247 247 Device will reply with firmware version info, device info. frequency band info. detail please check device user manual. Total 5 bytes Example: If device is of firmware version 1.1.0 Upload: xx ~-~- yy ~-~- zz ~-~- 110 total 5 bytes 248 -))) 249 249 250 -((( 251 -**xx: Software Type:** 252 -))) 152 +xx: Software Type: 253 253 254 254 * 0x00 01: LGT92 Version 255 255 * 0x00 02: LBT1 256 256 * 0x00 03: LSE01/LDDS75/LDDS20/LSPH01/LLMS01/LSNPK01 257 257 258 -((( 259 -**yy: Frequency Band:** 260 -))) 158 +yy: Frequency Band: 261 261 262 262 * 0x01: EU868 263 263 * 0x02: US915 ... ... @@ -270,9 +270,7 @@ 270 270 * 0x09: AS923-2 271 271 * 0xa0: AS923-3 272 272 273 -((( 274 -**zz: Subband** 275 -))) 171 +zz: Subband 276 276 277 277 firmware version: v1.1.0 ~-~-> 110 278 278 ... ... @@ -281,29 +281,21 @@ 281 281 282 282 Feature: Show All configure. No downlink command yet. 283 283 284 -{{info}} 285 -**AT Command: AT+CFG** 286 -{{/info}} 180 +AT Command: AT+CFG 287 287 288 -(% border="1" style="background-color:#ffffcc; color:green; width:599.222px" %) 289 -|=(% colspan="3" style="width: 596px;" %)AT+CFG: Print all configurations 290 -|(% style="width:160px" %)**Command Example**|(% style="width:154px" %)**Function**|(% style="width:280px" %)**Response** 291 -|(% style="width:160px" %)AT+CFG|(% style="width:154px" %)Show all configures|(% style="width:280px" %)((( 292 -AT+DEUI = XX XX XX XX XX XX XX XX 182 +|=(% colspan="3" %)AT+CFG: Print all configurations 183 +|**Command Example**|**Function**|**Response** 184 +|AT+CFG|Show all configures| 293 293 186 +{{{AT+DEUI = XX XX XX XX XX XX XX XX 294 294 AT+DADDR=XXXXXXXX 295 - 296 296 ………. 297 - 298 298 AT+RX2WTO=X 299 - 300 300 AT+CHS=868100000 301 - 302 302 OK 303 - )))192 +}}} 304 304 305 305 306 - 307 307 = 5. Keys, IDs and EUIs management = 308 308 309 309 == 5.1 Application EUI == ... ... @@ -310,51 +310,40 @@ 310 310 311 311 Feature: Get or Set the Application EUI. 312 312 313 -{{info}} 314 -**AT Command: AT+APPEUI** 315 -{{/info}} 201 +AT Command: AT+APPEUI 316 316 317 -(% border="1" style="background-color:#ffffcc; color:green; width:686.222px" %) 318 -|=(% colspan="3" style="width: 683px;" %)AT+APPEUI 319 -|(% style="width:305px" %)**Command Example**|(% style="width:186px" %)**Function**|(% style="width:191px" %)**Response** 320 -|(% style="width:305px" %)AT+APPEUI=?|(% style="width:186px" %)Get the Application EUI|(% style="width:191px" %)00 b3 d5 00 00 00 00 00((( 203 +|=(% colspan="3" %)AT+APPEUI 204 +|**Command Example**|**Function**|**Response** 205 +|AT+APPEUI=?|Get the Application EUI|00 b3 d5 00 00 00 00 00((( 321 321 OK 322 322 ))) 323 -| (% style="width:305px" %)AT+APPEUI=00 b3 d5 7e f0 00 4d 34|(% style="width:186px" %)Set the Application EUI|(% style="width:191px" %)OK208 +|AT+APPEUI=00 b3 d5 7e f0 00 4d 34|Set the Application EUI|OK 324 324 325 - 326 - 327 327 == 5.2 Application Key == 328 328 329 329 Feature: Get or Set the Application Key. 330 330 331 -{{info}} 332 -**AT Command: AT+APPKEY** 333 -{{/info}} 214 +AT Command: AT+APPKEY 334 334 335 -(% border="1" style="background-color:#ffffcc; color:green; width:976.222px" %) 336 -|=(% colspan="3" style="width: 973px;" %)AT+APPKEY 337 -|(% style="width:441px" %)**Command Example**|(% style="width:180px" %)**Function**|(% style="width:350px" %)**Response** 338 -|(% style="width:441px" %)AT+APPKEY=?|(% style="width:180px" %)Get the Application Key|(% style="width:350px" %)00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35((( 216 +|=(% colspan="3" %)AT+APPKEY 217 +|**Command Example**|**Function**|**Response** 218 +|AT+APPKEY=?|Get the Application Key|00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35((( 339 339 OK 340 340 ))) 341 -| (% style="width:441px" %)AT+APPKEY=00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35|(% style="width:180px" %)Set the Application Key|(% style="width:350px" %)OK221 +|AT+APPKEY=00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35|Set the Application Key.|OK 342 342 343 343 == 5.3 Application Session Key == 344 344 345 345 Feature: Get or Set the Application Session Key. 346 346 347 -{{info}} 348 -**AT Command: AT+APPSKEY** 349 -{{/info}} 227 +AT Command: AT+APPSKEY 350 350 351 -(% border="1" style="background-color:#ffffcc; color:green; width:1040.22px" %) 352 -|=(% colspan="3" style="width: 1037px;" %)AT+APPSKEY 353 -|(% style="width:451px" %)**Command Example**|(% style="width:231px" %)**Function**|(% style="width:354px" %)**Response** 354 -|(% style="width:451px" %)AT+APPSKEY=?|(% style="width:231px" %)Get the Application Session Key|(% style="width:354px" %)00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2((( 229 +|=(% colspan="3" %)AT+APPSKEY 230 +|**Command Example**|**Function**|**Response** 231 +|AT+APPSKEY=?|Get the Application Session Key|00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2((( 355 355 OK 356 356 ))) 357 -| (% style="width:451px" %)AT+APPSKEY=00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2|(% style="width:231px" %)Set the Application Session Key|(% style="width:354px" %)(While Error in format, return AT_PARAM_ERROR)(((234 +|AT+APPSKEY=00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2|Set the Application Session Key.|(While Error in format, return AT_PARAM_ERROR)((( 358 358 OK 359 359 ))) 360 360 ... ... @@ -362,35 +362,29 @@ 362 362 363 363 Feature: Get or Set the Device Address. 364 364 365 -{{info}} 366 -**AT Command: AT+DADDR** 367 -{{/info}} 242 +AT Command: AT+DADDR 368 368 369 -(% border="1" style="background-color:#ffffcc; color:green; width:795.222px" %) 370 -|=(% colspan="3" style="width: 792px;" %)AT+DADDR 371 -|(% style="width:192px" %)**Command Example**|(% style="width:241px" %)**Function**|(% style="width:359px" %)**Response** 372 -|(% style="width:192px" %)AT+DADDR=?|(% style="width:241px" %)Get the Application Session Key.|(% style="width:359px" %)(While Error in format, return AT_PARAM_ERROR)((( 244 +|=(% colspan="3" %)AT+DADDR 245 +|**Command Example**|**Function**|**Response** 246 +|AT+DADDR=?|Get the Application Session Key.|(While Error in format, return AT_PARAM_ERROR)((( 373 373 A8 40 41 FF 374 374 375 375 OK 376 376 ))) 377 -| (% style="width:192px" %)AT+DADDR=A8 40 41 FF|(% style="width:241px" %)Set the Application Session Key.|(% style="width:359px" %)OK251 +|AT+DADDR=A8 40 41 FF|Set the Application Session Key.|OK 378 378 379 379 == 5.5 Device EUI == 380 380 381 381 Feature: Get or Set the Device EUI. 382 382 383 -{{info}} 384 -**AT Command: AT+DEUI** 385 -{{/info}} 257 +AT Command: AT+DEUI 386 386 387 -(% border="1" style="background-color:#ffffcc; color:green; width:1035.22px" %) 388 -|=(% colspan="3" style="width: 1032px;" %)AT+DEUI 389 -|(% style="width:250px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:634px" %)**Response** 390 -|(% style="width:250px" %)AT+DEUI=?|(% style="width:147px" %)Get the Device EUI.|(% style="width:634px" %)00 44 34 22 33 45 55 55((( 259 +|=(% colspan="3" %)AT+DEUI 260 +|**Command Example**|**Function**|**Response** 261 +|AT+DEUI=?|Get the Device EUI.|00 44 34 22 33 45 55 55((( 391 391 OK 392 392 ))) 393 -| (% style="width:250px" %)AT+DEUI=A8 40 41 FF FF 12 34 56|(% style="width:147px" %)Set the Device EUI.|(% style="width:634px" %)(System will write new value to Device EUI,While Error in format, return AT_PARAM_ERROR)(((264 +|AT+DEUI=A8 40 41 FF FF 12 34 56|Set the Device EUI.|(System will write new value to Device EUI,While Error in format, return AT_PARAM_ERROR)((( 394 394 OK 395 395 ))) 396 396 ... ... @@ -398,33 +398,27 @@ 398 398 399 399 Feature: Get or Set the Network ID.(You can enter this command change only after successful network connection) 400 400 401 -{{info}} 402 -**AT Command: AT+NWKID** 403 -{{/info}} 272 +AT Command: AT+NWKID 404 404 405 -(% border="1" style="background-color:#ffffcc; color:green; width:448.222px" %) 406 -|=(% colspan="3" style="width: 445px;" %)AT+NWKID 407 -|(% style="width:191px" %)**Command Example**|(% style="width:153px" %)**Function**|(% style="width:101px" %)**Response** 408 -|(% style="width:191px" %)AT+NWKID=?|(% style="width:153px" %)Get the Network ID.|(% style="width:101px" %)a8 40 41 ff((( 274 +|=(% colspan="3" %)AT+NWKID 275 +|**Command Example**|**Function**|**Response** 276 +|AT+NWKID=?|Get the Network ID.|a8 40 41 ff((( 409 409 OK 410 410 ))) 411 -| (% style="width:191px" %)AT+NWKID=A8 40 41 FF|(% style="width:153px" %)Set the Network ID.|(% style="width:101px" %)OK279 +|AT+NWKID=A8 40 41 FF|Set the Network ID.|OK 412 412 413 413 == 5.7 Network Session Key == 414 414 415 415 Feature: Get or Set the Network Session Key 416 416 417 -{{info}} 418 -**AT Command: AT+NWKSKEY** 419 -{{/info}} 285 +AT Command: AT+NWKSKEY 420 420 421 -(% border="1" style="background-color:#ffffcc; color:green; width:1017.22px" %) 422 -|=(% colspan="3" style="width: 1014px;" %)AT+NWKSKEY 423 -|(% style="width:455px" %)**Command Example**|(% style="width:215px" %)**Function**|(% style="width:343px" %)**Response** 424 -|(% style="width:455px" %)AT+NWKSKEY=?|(% style="width:215px" %)Get the Network Session Key.|(% style="width:343px" %)00 4f 19 25 52 ce 97 09 d7 fa 84 71 db 51 02 92((( 287 +|=(% colspan="3" %)AT+NWKSKEY 288 +|**Command Example**|**Function**|**Response** 289 +|AT+NWKSKEY=?|Get the Network Session Key.|00 4f 19 25 52 ce 97 09 d7 fa 84 71 db 51 02 92((( 425 425 OK 426 426 ))) 427 -| (% style="width:455px" %)AT+NWKSKEY=A8 40 41 FF FF 12 34 56 00 01 02 04 05 06 06 07|(% style="width:215px" %)Set the Network Session Key.|(% style="width:343px" %)OK292 +|AT+NWKSKEY=A8 40 41 FF FF 12 34 56 00 01 02 04 05 06 06 07|Set the Network Session Key.|OK 428 428 429 429 = 6. Joining and sending date on LoRaWAN network = 430 430 ... ... @@ -432,18 +432,15 @@ 432 432 433 433 Feature: Get or Set the confirmation mode (0-1). 434 434 435 -{{info}} 436 -**AT Command: AT+CFM** 437 -{{/info}} 300 +AT Command: AT+CFM 438 438 439 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %) 440 -|=(% colspan="3" style="width: 707px;" %)AT+CFM 441 -|(% style="width:155px" %)**Command Example**|(% style="width:205px" %)**Function**|(% style="width:346px" %)**Response** 442 -|(% style="width:155px" %)AT+CFM=?|(% style="width:205px" %)Get the confirmation mode|(% style="width:346px" %)0((( 302 +|=(% colspan="3" %)AT+CFM 303 +|**Command Example**|**Function**|**Response** 304 +|AT+CFM=?|Get the confirmation mode|0((( 443 443 OK 444 444 ))) 445 -| (% style="width:155px" %)AT+CFM=1|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)OK446 -| (% style="width:155px" %)AT+CFM=2|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)While Error in format, return AT_PARAM_ERROR307 +|AT+CFM=1|Set the confirmation mode|OK 308 +|AT+CFM=2|Set the confirmation mode|While Error in format, return AT_PARAM_ERROR 447 447 448 448 Downlink Command: 0x05 449 449 ... ... @@ -458,14 +458,11 @@ 458 458 459 459 Feature: Get confirmation status of the last AT+SEND (0-1). 460 460 461 -{{info}} 462 -**AT Command: AT+CFS** 463 -{{/info}} 323 +AT Command: AT+CFS 464 464 465 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %) 466 -|=(% colspan="3" style="width: 531px;" %)AT+CFS 467 -|(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:178px" %)**Response** 468 -|(% style="width:156px" %)AT+CFS=?|(% style="width:193px" %)Get confirmation status|(% style="width:178px" %)0((( 325 +|=(% colspan="3" %)AT+CFS 326 +|**Command Example**|**Function**|**Response** 327 +|AT+CFS=?|Get confirmation status|0((( 469 469 OK 470 470 ))) 471 471 ... ... @@ -473,14 +473,11 @@ 473 473 474 474 Feature: Join network. 475 475 476 -{{info}} 477 -**AT Command: AT+JOIN** 478 -{{/info}} 335 +AT Command: AT+JOIN 479 479 480 -(% border="1" style="background-color:#ffffcc; color:green; width:647.222px" %) 481 -|=(% colspan="3" style="width: 644px;" %)AT+JOIN 482 -|(% style="width:163px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:334px" %)**Response** 483 -|(% style="width:163px" %)AT+JOIN ?|(% style="width:147px" %)Get imformation.|(% style="width:334px" %)AT+JOIN: Join network((( 337 +|=(% colspan="3" %)AT+JOIN 338 +|**Command Example**|**Function**|**Response** 339 +|AT+JOIN ?|Get imformation.|AT+JOIN: Join network((( 484 484 OK 485 485 486 486 While Error in format, return AT_BUSY_ERROR ... ... @@ -490,42 +490,34 @@ 490 490 491 491 Feature: Get or Set the Network Join Mode. (0: ABP, 1: OTAA). 492 492 493 -{{info}} 494 -**AT Command: AT+NJM** 495 -{{/info}} 349 +AT Command: AT+NJM 496 496 497 -(% border="1" style="background-color:#ffffcc; color:green; width:753.222px" %) 498 -|=(% colspan="3" style="width: 750px;" %)AT+NJM 499 -|(% style="width:162px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:361px" %)**Response** 500 -|(% style="width:162px" %)AT+NJM=?|(% style="width:227px" %)Get the Network Join Mode|(% style="width:361px" %)1((( 351 +|=(% colspan="3" %)AT+NJM 352 +|**Command Example**|**Function**|**Response** 353 +|AT+NJM=?|Get the Network Join Mode|1((( 501 501 OK 502 502 ))) 503 -| (% style="width:162px" %)AT+NJM=0|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)OK504 -| (% style="width:162px" %)AT+NJM=2|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)While Error in format, return AT_PARAM_ERROR356 +|AT+NJM=0|Set the Network Join Mode|OK 357 +|AT+NJM=2|Set the Network Join Mode|While Error in format, return AT_PARAM_ERROR 505 505 506 -{{info}} 507 -**Downlink Command: 0x20** 508 -{{/info}} 359 +Downlink Command: 0x20 509 509 510 510 Format: Command Code (0x20) followed by 1 bytes mode value. 511 511 512 512 If the downlink payload=2000, it means set the Network Join Mode, while type code is 20. 513 513 514 -* **Example 1:**Downlink Payload:**2000**~/~/ Set AT+NJM=O515 -* **Example 2:**Downlink Payload:**2001**~/~/ Set AT+NJM=1365 +* Example 1: Downlink Payload: 2000 ~/~/ Set AT+NJM=O 366 +* Example 2: Downlink Payload: 2001 ~/~/ Set AT+NJM=1 516 516 517 517 == 6.5 LoRa® Network Join Status == 518 518 519 519 Feature: LoRa® Network Join Status. 520 520 521 -{{info}} 522 -**AT Command: AT+NJS** 523 -{{/info}} 372 +AT Command: AT+NJS 524 524 525 -(% border="1" style="background-color:#ffffcc; color:green; width:498.222px" %) 526 -|=(% colspan="3" style="width: 495px;" %)AT+NJS 527 -|(% style="width:169px" %)**Command Example**|(% style="width:164px" %)**Function**|(% style="width:161px" %)**Response** 528 -|(% style="width:169px" %)AT+NJS=?|(% style="width:164px" %)Get the join status.|(% style="width:161px" %)0((( 374 +|=(% colspan="3" %)AT+NJS 375 +|**Command Example**|**Function**|**Response** 376 +|AT+NJS=?|Get the join status.|0((( 529 529 OK 530 530 ))) 531 531 ... ... @@ -533,14 +533,11 @@ 533 533 534 534 Feature: Print Last Received Data in Raw Format<port:data>. 535 535 536 -{{info}} 537 -**AT Command: AT+RECV** 538 -{{/info}} 384 +AT Command: AT+RECV 539 539 540 -(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %) 541 -|=(% colspan="3" style="width: 584px;" %)AT+RECV 542 -|(% style="width:161px" %)**Command Example**|(% style="width:272px" %)**Function**|(% style="width:150px" %)**Response** 543 -|(% style="width:161px" %)AT+RECV=?|(% style="width:272px" %)print last received data in raw format.|(% style="width:150px" %)0:((( 386 +|=(% colspan="3" %)AT+RECV 387 +|**Command Example**|**Function**|**Response** 388 +|AT+RECV=?|print last received data in raw format.|0:((( 544 544 OK 545 545 ))) 546 546 ... ... @@ -548,14 +548,11 @@ 548 548 549 549 Feature: Print Last Received Data in Binary Format<port:data>. 550 550 551 -{{info}} 552 -**AT Command: AT+RECVB** 553 -{{/info}} 396 +AT Command: AT+RECVB 554 554 555 -(% border="1" style="background-color:#ffffcc; color:green; width:793.222px" %) 556 -|=(% colspan="3" style="width: 790px;" %)AT+RECVB 557 -|(% style="width:173px" %)**Command Example**|(% style="width:497px" %)**Function**|(% style="width:120px" %)**Response** 558 -|(% style="width:173px" %)AT+RECVB=?|(% style="width:497px" %)print last received data in binary format (with hexadecimal values).|(% style="width:120px" %)2: 0010((( 398 +|=(% colspan="3" %)AT+RECVB 399 +|**Command Example**|**Function**|**Response** 400 +|AT+RECVB=?|print last received data in binary format (with hexadecimal values).|2: 0010((( 559 559 OK 560 560 ))) 561 561 ... ... @@ -563,14 +563,11 @@ 563 563 564 564 Feature: Send Text Data<port:data>. 565 565 566 -{{info}} 567 -**AT Command: AT+SEND** 568 -{{/info}} 408 +AT Command: AT+SEND 569 569 570 -(% border="1" style="background-color:#ffffcc; color:green; width:991.222px" %) 571 -|=(% colspan="3" style="width: 988px;" %)AT+SEND 572 -|(% style="width:201px" %)**Command Example**|(% style="width:340px" %)**Function**|(% style="width:446px" %)**Response** 573 -|(% style="width:201px" %)AT+SEND=12:hello world|(% style="width:340px" %)Send text data along with the application port.|(% style="width:446px" %)OK((( 410 +|=(% colspan="3" %)AT+SEND 411 +|**Command Example**|**Function**|**Response** 412 +|AT+SEND=12:hello world|Send text data along with the application port.|OK((( 574 574 While Error in format, return 575 575 576 576 AT_BUSY_ERROR/AT_BUSY_ERROR/AT_NO_NETWORK_JOINED ... ... @@ -582,15 +582,12 @@ 582 582 583 583 Feature: Send hexadecimal data along with the application port. 584 584 585 -{{info}} 586 -**AT Command: AT+SENDB** 587 -{{/info}} 424 +AT Command: AT+SENDB 588 588 589 -(% border="1" style="background-color:#ffffcc; color:green; width:1120.22px" %) 590 -|=(% colspan="3" style="width: 1117px;" %)AT+SENDB 591 -|(% style="width:257px" %)**Command Example**|(% style="width:406px" %)**Function**|(% style="width:453px" %)**Response** 592 -|(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)OK 593 -|(% style="width:257px" %)AT+SENDB=abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)While Error in format, return((( 426 +|=(% colspan="3" %)AT+SENDB 427 +|**Command Example**|**Function**|**Response** 428 +|AT+SENDB=12:abcdef0123456789|Send hexadecimal data along with the application port.|OK 429 +|AT+SENDB=abcdef0123456789|Send hexadecimal data along with the application port.|While Error in format, return((( 594 594 AT_PARAM_ERROR AT_BUSY_ERROR/AT_NO_NETWORK_JOINED 595 595 596 596 ... ... @@ -602,46 +602,39 @@ 602 602 603 603 Feature: Get or Set the Adaptive Data Rate setting. (0: off, 1: on). 604 604 605 -{{info}} 606 -**AT Command: AT+ADR** 607 -{{/info}} 608 608 609 -(% border="1" style="background-color:#ffffcc; color:green; width:683.222px" %) 610 -|=(% colspan="3" style="width: 680px;" %)AT+ADR 611 -|(% style="width:162px" %)**Command Example**|(% style="width:266px" %)**Function**|(% style="width:250px" %)**Response** 612 -|(% style="width:162px" %)AT+ADR=?|(% style="width:266px" %)Get the Adaptive Data Rate setting.|(% style="width:250px" %)1((( 442 +AT Command: AT+ADR 443 + 444 +|=(% colspan="3" %)AT+ADR 445 +|**Command Example**|**Function**|**Response** 446 +|AT+ADR=?|Get the Adaptive Data Rate setting.|1((( 613 613 OK 614 614 ))) 615 -| (% style="width:162px" %)AT+ADR=0|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:250px" %)OK616 -| (% style="width:162px" %)AT+ADR=2|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:250px" %)While Error in format, return(((449 +|AT+ADR=0|Set the Adaptive Data Rate setting.|OK 450 +|AT+ADR=2|Set the Adaptive Data Rate setting.|While Error in format, return((( 617 617 AT_PARAM_ERROR 618 618 ))) 619 619 620 -{{info}} 621 -**Downlink Command: 0x22** 622 -{{/info}} 454 +Downlink Command: 0x22 623 623 624 624 625 625 If the downlink payload=2201, it means setting the adaptive data rate to 1, while type code is 22. 626 626 627 -* **Example 1**: Downlink Payload:**2201**~/~/ Set AT+ADR=1.628 -* **Example 2**: Downlink Payload:**2200FFFF**~/~/ Set AT+ADR=0.459 +* Example 1: Downlink Payload: 2201 ~/~/ Set AT+ADR=1. 460 +* Example 2: Downlink Payload: 2200FFFF ~/~/ Set AT+ADR=0. 629 629 630 630 == 7.2 LoRa® Class == 631 631 632 632 Feature: Get or Set the Device Class(Currently only support class A, class C). 633 633 634 -{{info}} 635 -**AT Command:AT+CLASS** 636 -{{/info}} 466 +AT Command:AT+CLASS 637 637 638 -(% border="1" style="background-color:#ffffcc; color:green; width:507.222px" %) 639 -|=(% colspan="3" style="width: 504px;" %)AT+CLASS 640 -|(% style="width:163px" %)**Command Example**|(% style="width:166px" %)**Function**|(% style="width:175px" %)**Response** 641 -|(% style="width:163px" %)AT+CLASS=?|(% style="width:166px" %)Get the Device Class.|(% style="width:175px" %)A((( 468 +|=(% colspan="3" %)AT+CLASS 469 +|**Command Example**|**Function**|**Response** 470 +|AT+CLASS=?|Get the Device Class.|A((( 642 642 OK 643 643 ))) 644 -| (% style="width:163px" %)AT+CLASS=C|(% style="width:166px" %)Set the Device Class.|(% style="width:175px" %)OK(((473 +|AT+CLASS=C|Set the Device Class.|OK((( 645 645 646 646 ))) 647 647 ... ... @@ -649,17 +649,14 @@ 649 649 650 650 Feature: Get or Set the ETSI Duty Cycle setting - 0=disable, 1=enable - Only for testing. 651 651 652 -{{info}} 653 -**AT Command:AT+DCS** 654 -{{/info}} 481 +AT Command:AT+DCS 655 655 656 -(% border="1" style="background-color:#ffffcc; color:green; width:515.222px" %) 657 -|=(% colspan="3" style="width: 512px;" %)AT+DCS 658 -|(% style="width:165px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:107px" %)**Response** 659 -|(% style="width:165px" %)AT+DCS=?|(% style="width:239px" %)Get the ETSI Duty Cycle setting.|(% style="width:107px" %)1((( 483 +|=(% colspan="3" %)AT+DCS 484 +|**Command Example**|**Function**|**Response** 485 +|AT+DCS=?|Get the ETSI Duty Cycle setting.|1((( 660 660 OK 661 661 ))) 662 -| (% style="width:165px" %)AT+DCS=1|(% style="width:239px" %)Set the ETSI Duty Cycle setting.|(% style="width:107px" %)OK(((488 +|AT+DCS=1|Set the ETSI Duty Cycle setting.|OK((( 663 663 664 664 ))) 665 665 ... ... @@ -667,45 +667,37 @@ 667 667 668 668 Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) . Note: while set Data Rate, please use set Adptive Data Rate, ADR=0 first. otherwise device will response to server's ADR command and change the DR to the setting from server 669 669 670 -{{info}} 671 -**AT Command: AT+DR** 672 -{{/info}} 496 +AT Command: AT+DR 673 673 674 -(% border="1" style="background-color:#ffffcc; color:green; width:466.222px" %) 675 -|=(% colspan="3" style="width: 463px;" %)AT+DR 676 -|(% style="width:156px" %)**Command Example**|(% style="width:167px" %)**Function**|(% style="width:140px" %)**Response** 677 -|(% style="width:156px" %)AT+DR=?|(% style="width:167px" %)Get the Data Rate.|(% style="width:140px" %)5((( 498 +|=(% colspan="3" %)AT+DR 499 +|**Command Example**|**Function**|**Response** 500 +|AT+DR=?|Get the Data Rate.|5((( 678 678 OK 679 679 ))) 680 -| (% style="width:156px" %)AT+DR=2|(% style="width:167px" %)Set the Data Rate.|(% style="width:140px" %)OK(((503 +|AT+DR=2|Set the Data Rate.|OK((( 681 681 682 682 ))) 683 683 684 -{{info}} 685 -**Downlink Command: 0x2200aaFF** 686 -{{/info}} 507 +Downlink Command: 0x2200aaFF 687 687 688 688 689 689 If the downlink payload=220001FF, it means setting the data rate to 1, while type code is 22 00 aa FF. 690 690 691 -* **Example 1**: Downlink Payload:**220001FF**~/~/ Set AT+DR=1.692 -* **Example 2**: Downlink Payload:**220000FF**~/~/ Set AT+DR=0.512 +* Example 1: Downlink Payload: 220001FF ~/~/ Set AT+DR=1. 513 +* Example 2: Downlink Payload: 220000FF ~/~/ Set AT+DR=0. 693 693 694 694 == 7.5 Frame Counter Downlink == 695 695 696 696 Feature: Get or Set the Frame Counter Downlink. 697 697 698 -{{info}} 699 -**AT Command:AT+FCD** 700 -{{/info}} 519 +AT Command:AT+FCD 701 701 702 -(% border="1" style="background-color:#ffffcc; color:green; width:693.222px" %) 703 -|=(% colspan="3" style="width: 690px;" %)AT+FCD 704 -|(% style="width:162px" %)**Command Example**|(% style="width:258px" %)**Function**|(% style="width:269px" %)**Response** 705 -|(% style="width:162px" %)AT+FCD=?|(% style="width:258px" %)Get the Frame Counter Downlink.|(% style="width:269px" %)0((( 521 +|=(% colspan="3" %)AT+FCD 522 +|**Command Example**|**Function**|**Response** 523 +|AT+FCD=?|Get the Frame Counter Downlink.|0((( 706 706 OK 707 707 ))) 708 -| (% style="width:162px" %)AT+FCD=10|(% style="width:258px" %)Set the Frame Counter Downlink.|(% style="width:269px" %)(System will write new value to FCD)(((526 +|AT+FCD=10|Set the Frame Counter Downlink.|(System will write new value to FCD)((( 709 709 OK 710 710 711 711 ... ... @@ -715,17 +715,14 @@ 715 715 716 716 Feature: Get or Set the Frame Counter Uplink. 717 717 718 -{{info}} 719 -**AT Command:AT+FCU** 720 -{{/info}} 536 +AT Command:AT+FCU 721 721 722 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %) 723 -|=(% colspan="3" style="width: 531px;" %)AT+FCU 724 -|(% style="width:177px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:113px" %)**Response** 725 -|(% style="width:177px" %)AT+FCU=?|(% style="width:239px" %)Get the Frame Counter Uplink.|(% style="width:113px" %)0((( 538 +|=(% colspan="3" %)AT+FCU 539 +|**Command Example**|**Function**|**Response** 540 +|AT+FCU=?|Get the Frame Counter Uplink.|0((( 726 726 OK 727 727 ))) 728 -| (% style="width:177px" %)AT+FCU=10|(% style="width:239px" %)Set the Frame Counter Uplink.|(% style="width:113px" %)OK(((543 +|AT+FCU=10|Set the Frame Counter Uplink.|OK((( 729 729 730 730 ))) 731 731 ... ... @@ -733,17 +733,14 @@ 733 733 734 734 Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 1 in ms. 735 735 736 -{{info}} 737 -**AT Command:AT+JN1DL** 738 -{{/info}} 551 +AT Command:AT+JN1DL 739 739 740 -(% border="1" style="background-color:#ffffcc; color:green; width:537.222px" %) 741 -|=(% colspan="3" style="width: 534px;" %)AT+JN1DL 742 -|(% style="width:164px" %)**Command Example**|(% style="width:229px" %)**Function**|(% style="width:140px" %)**Response** 743 -|(% style="width:164px" %)AT+JN1DL=?|(% style="width:229px" %)Get the Join Accept Delay.|(% style="width:140px" %)5000((( 553 +|=(% colspan="3" %)AT+JN1DL 554 +|**Command Example**|**Function**|**Response** 555 +|AT+JN1DL=?|Get the Join Accept Delay.|5000((( 744 744 OK 745 745 ))) 746 -| (% style="width:164px" %)AT+JN1DL=10000|(% style="width:229px" %)Set the Join Accept Delay.|(% style="width:140px" %)OK(((558 +|AT+JN1DL=10000|Set the Join Accept Delay.|OK((( 747 747 748 748 ))) 749 749 ... ... @@ -751,17 +751,14 @@ 751 751 752 752 Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 2 in ms. 753 753 754 -{{info}} 755 -**AT Command:AT+JN2DL** 756 -{{/info}} 566 +AT Command:AT+JN2DL 757 757 758 -(% border="1" style="background-color:#ffffcc; color:green; width:538.222px" %) 759 -|=(% colspan="3" style="width: 535px;" %)AT+JN2DL 760 -|(% style="width:160px" %)**Command Example**|(% style="width:228px" %)**Function**|(% style="width:146px" %)**Response** 761 -|(% style="width:160px" %)AT+JN2DL=?|(% style="width:228px" %)Get the Join Accept Delay.|(% style="width:146px" %)6000((( 568 +|=(% colspan="3" %)AT+JN2DL 569 +|**Command Example**|**Function**|**Response** 570 +|AT+JN2DL=?|Get the Join Accept Delay.|6000((( 762 762 OK 763 763 ))) 764 -| (% style="width:160px" %)AT+JN2DL=20000|(% style="width:228px" %)Set the Join Accept Delay.|(% style="width:146px" %)OK(((573 +|AT+JN2DL=20000|Set the Join Accept Delay.|OK((( 765 765 766 766 ))) 767 767 ... ... @@ -769,17 +769,14 @@ 769 769 770 770 Feature: Get or Set the public network mode. (0: off, 1: on) 771 771 772 -{{info}} 773 -**AT Command:AT+PNM** 774 -{{/info}} 581 +AT Command:AT+PNM 775 775 776 -(% border="1" style="background-color:#ffffcc; color:green; width:667.222px" %) 777 -|=(% colspan="3" style="width: 664px;" %)AT+PNM 778 -|(% style="width:166px" %)**Command Example**|(% style="width:225px" %)**Function**|(% style="width:272px" %)**Response** 779 -|(% style="width:166px" %)AT+PNM=?|(% style="width:225px" %)Get the public network mode.|(% style="width:272px" %)1((( 583 +|=(% colspan="3" %)AT+PNM 584 +|**Command Example**|**Function**|**Response** 585 +|AT+PNM=?|Get the public network mode.|1((( 780 780 OK 781 781 ))) 782 -| (% style="width:166px" %)AT+PNM=1|(% style="width:225px" %)Set the public network mode.|(% style="width:272px" %)(System will write new value to PNM)(((588 +|AT+PNM=1|Set the public network mode.|(System will write new value to PNM)((( 783 783 OK 784 784 785 785 ... ... @@ -789,35 +789,29 @@ 789 789 790 790 Feature: Get or Set the delay between the end of the Tx and the Rx Window 1 in ms 791 791 792 -{{info}} 793 -**AT Command:AT+RX1DL** 794 -{{/info}} 598 +AT Command:AT+RX1DL 795 795 796 -(% border="1" style="background-color:#ffffcc; color:green; width:408.222px" %) 797 -|=(% colspan="3" style="width: 405px;" %)AT+RX1DL 798 -|(% style="width:155px" %)**Command Example**|(% style="width:128px" %)**Function**|(% style="width:122px" %)**Response** 799 -|(% style="width:155px" %)AT+RX1DL=?|(% style="width:128px" %)Get the delay.|(% style="width:122px" %)1000((( 600 +|=(% colspan="3" %)AT+RX1DL 601 +|**Command Example**|**Function**|**Response** 602 +|AT+RX1DL=?|Get the delay.|1000((( 800 800 OK 801 801 ))) 802 -| (% style="width:155px" %)AT+RX1DL=1500|(% style="width:128px" %)Set the delay.|(% style="width:122px" %)OK(((605 +|AT+RX1DL=1500|Set the delay.|OK((( 803 803 804 804 ))) 805 805 806 -== 7.11 609 +== 7.11Receive Delay2 == 807 807 808 808 Feature: Get or Set the delay between the end of the Tx and the Rx Window 2 in ms 809 809 810 -{{info}} 811 -**AT Command:AT+RX2DL** 812 -{{/info}} 613 +AT Command:AT+RX2DL 813 813 814 -(% border="1" style="background-color:#ffffcc; color:green; width:481.222px" %) 815 -|=(% colspan="3" style="width: 478px;" %)AT+RX2DL 816 -|(% style="width:175px" %)**Command Example**|(% style="width:152px" %)**Function**|(% style="width:150px" %)**Response** 817 -|(% style="width:175px" %)AT+RX2DL=?|(% style="width:152px" %)Get the delay.|(% style="width:150px" %)2000((( 615 +|=(% colspan="3" %)AT+RX2DL 616 +|**Command Example**|**Function**|**Response** 617 +|AT+RX2DL=?|Get the delay.|2000((( 818 818 OK 819 819 ))) 820 -| (% style="width:175px" %)AT+RX2DL=2500|(% style="width:152px" %)Set the delay.|(% style="width:150px" %)OK(((620 +|AT+RX2DL=2500|Set the delay.|OK((( 821 821 822 822 ))) 823 823 ... ... @@ -825,17 +825,14 @@ 825 825 826 826 Feature: Get or Set the Rx2 window data rate (0-7 corresponding to DR_X) 827 827 828 -{{info}} 829 -**AT Command:AT+RX2DR** 830 -{{/info}} 628 +AT Command:AT+RX2DR 831 831 832 -(% border="1" style="background-color:#ffffcc; color:green; width:525.222px" %) 833 -|=(% colspan="3" style="width: 522px;" %)AT+RX2DR 834 -|(% style="width:160px" %)**Command Example**|(% style="width:232px" %)**Function**|(% style="width:130px" %)**Response** 835 -|(% style="width:160px" %)AT+RX2DR=?|(% style="width:232px" %)Get the Rx2 window data rate.|(% style="width:130px" %)2((( 630 +|=(% colspan="3" %)AT+RX2DR 631 +|**Command Example**|**Function**|**Response** 632 +|AT+RX2DR=?|Get the Rx2 window data rate.|2((( 836 836 OK 837 837 ))) 838 -| (% style="width:160px" %)AT+RX2DR=6|(% style="width:232px" %)Set the Rx2 window data rate.|(% style="width:130px" %)OK(((635 +|AT+RX2DR=6|Set the Rx2 window data rate.|OK((( 839 839 840 840 ))) 841 841 ... ... @@ -843,17 +843,14 @@ 843 843 844 844 Feature: Get or Set the Rx2 window frequency 845 845 846 -{{info}} 847 -**AT Command:AT+RX2FQ** 848 -{{/info}} 643 +AT Command:AT+RX2FQ 849 849 850 -(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %) 851 -|=(% colspan="3" style="width: 584px;" %)AT+RX2FQ 852 -|(% style="width:183px" %)**Command Example**|(% style="width:240px" %)**Function**|(% style="width:160px" %)**Response** 853 -|(% style="width:183px" %)AT+RX2FQ=?|(% style="width:240px" %)Get the Rx2 window frequency.|(% style="width:160px" %)434665000((( 645 +|=(% colspan="3" %)AT+RX2FQ 646 +|**Command Example**|**Function**|**Response** 647 +|AT+RX2FQ=?|Get the Rx2 window frequency.|434665000((( 854 854 OK 855 855 ))) 856 -| (% style="width:183px" %)AT+RX2FQ=434665000|(% style="width:240px" %)Set the Rx2 window frequency.|(% style="width:160px" %)OK(((650 +|AT+RX2FQ=434665000|Set the Rx2 window frequency.|OK((( 857 857 858 858 ))) 859 859 ... ... @@ -861,17 +861,14 @@ 861 861 862 862 Feature: Get or Set the Transmit Power(0-5, MAX:0, MIN:5, according to LoRaWAN Spec, or 40=10dB, 41 = 11dB, …, 50 = 20dB which is out of LoRaWAN spec. ) 863 863 864 -{{info}} 865 -**AT Command:AT+TXP** 866 -{{/info}} 658 +AT Command:AT+TXP 867 867 868 -(% border="1" style="background-color:#ffffcc; color:green; width:465.222px" %) 869 -|=(% colspan="3" style="width: 462px;" %)AT+TXP 870 -|(% style="width:161px" %)**Command Example**|(% style="width:189px" %)**Function**|(% style="width:112px" %)**Response** 871 -|(% style="width:161px" %)AT+TXP=?|(% style="width:189px" %)Get the Transmit Power.|(% style="width:112px" %)0((( 660 +|=(% colspan="3" %)AT+TXP 661 +|**Command Example**|**Function**|**Response** 662 +|AT+TXP=?|Get the Transmit Power.|0((( 872 872 OK 873 873 ))) 874 -| (% style="width:161px" %)AT+TXP=1|(% style="width:189px" %)Set the Transmit Power.|(% style="width:112px" %)OK(((665 +|AT+TXP=1|Set the Transmit Power.|OK((( 875 875 876 876 ))) 877 877 ... ... @@ -879,21 +879,18 @@ 879 879 880 880 If the downlink payload=22000100, it means setting the TXP to 0. 881 881 882 -* **Example 1**: Downlink Payload:**22000102**~/~/ Set AT+TXP=2.883 -* **Example 2**: Downlink Payload:**220000FF**~/~/ Set AT+TXP=0.673 +* Example 1: Downlink Payload: 22000102 ~/~/ Set AT+TXP=2. 674 +* Example 2: Downlink Payload: 220000FF ~/~/ Set AT+TXP=0. 884 884 885 885 == 7.15 RSSI of the Last Received Packet == 886 886 887 887 Feature: Get or Set the Rx2 window frequency 888 888 889 -{{info}} 890 -**AT Command:AT+RSSI** 891 -{{/info}} 680 +AT Command:AT+RSSI 892 892 893 -(% border="1" style="background-color:#ffffcc; color:green; width:557.222px" %) 894 -|=(% colspan="3" style="width: 554px;" %)AT+RSSI 895 -|(% style="width:164px" %)**Command Example**|(% style="width:289px" %)**Function**|(% style="width:100px" %)**Response** 896 -|(% style="width:164px" %)AT+RSSI=?|(% style="width:289px" %)Get the RSSI of the last received packet.|(% style="width:100px" %)0((( 682 +|=(% colspan="3" %)AT+RSSI 683 +|**Command Example**|**Function**|**Response** 684 +|AT+RSSI=?|Get the RSSI of the last received packet.|0((( 897 897 OK 898 898 ))) 899 899 ... ... @@ -901,14 +901,11 @@ 901 901 902 902 Feature: Get the SNR of the last received packet 903 903 904 -{{info}} 905 -**AT Command:AT+SNR** 906 -{{/info}} 692 +AT Command:AT+SNR 907 907 908 -(% border="1" style="background-color:#ffffcc; color:green; width:571.222px" %) 909 -|=(% colspan="3" style="width: 568px;" %)AT+SNR 910 -|(% style="width:164px" %)**Command Example**|(% style="width:290px" %)**Function**|(% style="width:113px" %)**Response** 911 -|(% style="width:164px" %)AT+SNR=?|(% style="width:290px" %)Get the RSSI of the last received packet.|(% style="width:113px" %)0((( 694 +|=(% colspan="3" %)AT+SNR 695 +|**Command Example**|**Function**|**Response** 696 +|AT+SNR=?|Get the RSSI of the last received packet.|0((( 912 912 OK 913 913 ))) 914 914 ... ... @@ -916,144 +916,114 @@ 916 916 917 917 Feature: Get or set the application port. 918 918 919 -{{info}} 920 -**AT Command: AT+PORT** 921 -{{/info}} 704 +AT Command: AT+PORT 922 922 923 -(% border="1" style="background-color:#ffffcc; color:green; width:500.222px" %) 924 -|=(% colspan="3" style="width: 497px;" %)AT+PORT 925 -|(% style="width:157px" %)**Command Example**|(% style="width:204px" %)**Function**|(% style="width:135px" %)**Response** 926 -|(% style="width:157px" %)AT+PORT=?|(% style="width:204px" %)Get the application port|(% style="width:135px" %)21((( 706 +|=(% colspan="3" %)AT+PORT 707 +|**Command Example**|**Function**|**Response** 708 +|AT+PORT=?|Get the application port|21((( 927 927 OK 928 928 ))) 929 -| (% style="width:157px" %)AT+PORT=21|(% style="width:204px" %)Set the application port|(% style="width:135px" %)OK711 +|AT+PORT=21|Set the application port|OK 930 930 931 -{{info}} 932 -**Downlink Command: 0x23** 933 -{{/info}} 713 +Downlink Command: 0x23 934 934 935 935 Format: Command Code (0x23) followed by 1 bytes port value. 936 936 937 937 If the downlink payload=2301, it means set the application port to 1, while type code is 23. 938 938 939 -* **Example 1**: Downlink Payload:**2301**~/~/ set the application port to 1940 -* **Example 2**: Downlink Payload:**2305**~/~/ set the application port to 5719 +* Example 1: Downlink Payload: 2301 ~/~/ set the application port to 1 720 +* Example 2: Downlink Payload: 2305 ~/~/ set the application port to 5 941 941 942 942 == 7.18 Single Channel Mode == 943 943 944 944 Feature:Get or Set Frequency (Unit: Hz) for Single Channel Mode. 945 945 946 -{{info}} 947 -**AT Command: AT+CHS** 948 -{{/info}} 726 +AT Command: AT+CHS 949 949 950 -(% border="1" style="background-color:#ffffcc; color:green; width:603.222px" %) 951 -|=(% colspan="3" style="width: 600px;" %)AT+CHS 952 -|(% style="width:182px" %)**Command Example**|(% style="width:295px" %)**Function**|(% style="width:122px" %)**Response** 953 -|(% style="width:182px" %)AT+CHS=?|(% style="width:295px" %)Get Frequency for Single Channel Mode|(% style="width:122px" %)0((( 728 +|=(% colspan="3" %)AT+CHS 729 +|**Command Example**|**Function**|**Response** 730 +|AT+CHS=?|Get Frequency for Single Channel Mode|0((( 954 954 OK 955 955 ))) 956 -| (% style="width:182px" %)AT+CHS=868100000|(% style="width:295px" %)Set Frequency for Single Channel Mode|(% style="width:122px" %)OK733 +|AT+CHS=868100000|Set Frequency for Single Channel Mode|OK 957 957 958 958 == 7.19 Eight Channel Mode == 959 959 960 960 Feature: Get or Set eight channels mode,Only for US915,AU915,CN470. 961 961 962 -{{info}} 963 -**AT Command: AT+CHE** 964 -{{/info}} 739 +AT Command: AT+CHE 965 965 966 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %) 967 -|=(% colspan="3" style="width: 707px;" %)AT+CHE 968 -|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response** 969 -|(% style="width:160px" %)AT+CHE=?|(% style="width:198px" %)Get eight channels mode|(% style="width:349px" %)1((( 741 +|=(% colspan="3" %)AT+CHE 742 +|**Command Example**|**Function**|**Response** 743 +|AT+CHE=?|Get eight channels mode|1((( 970 970 902.3 902.5 902.7 902.9 903.1 903.3 903.5 903.7 971 971 972 972 OK 973 973 ))) 974 -| (% style="width:160px" %)AT+CHE=1|(% style="width:198px" %)Set eight channels mode|(% style="width:349px" %)OK748 +|AT+CHE=1|Set eight channels mode|OK 975 975 976 -{{info}} 977 -**Downlink Command: 0x24** 978 -{{/info}} 750 +Downlink Command: 0x24 979 979 980 980 Format: Command Code (0x24) followed by 1 bytes channel value. 981 981 982 982 If the downlink payload=2401, it means set channel mode to 1, while type code is 24. 983 983 984 -* **Example 1**: Downlink Payload: 2401 ~/~/ set channel mode to 1985 -* **Example 2**: Downlink Payload: 2405 ~/~/ set channel mode to 5756 +* Example 1: Downlink Payload: 2401 ~/~/ set channel mode to 1 757 +* Example 2: Downlink Payload: 2405 ~/~/ set channel mode to 5 986 986 987 987 == 7.20 Get or Set RXwindows1 timeout == 988 988 989 989 Feature:Get or Set the number of symbols to detect and timeout from RXwindow1(0 to 255). 990 990 991 -{{info}} 992 -**AT Command: AT+RX1WTO** 993 -{{/info}} 763 +AT Command: AT+RX1WTO 994 994 995 -(% border="1" style="background-color:#ffffcc; color:green; width:460.222px" %) 996 -|=(% colspan="3" style="width: 457px;" %)AT+ RX1WTO 997 -|(% style="width:163px" %)**Command Example**|(% style="width:201px" %)**Function**|(% style="width:93px" %)**Response** 998 -|(% style="width:163px" %)AT+RX1WTO=?|(% style="width:201px" %)Get RXwindows1 timeout|(% style="width:93px" %)14((( 765 +|=(% colspan="3" %)AT+ RX1WTO 766 +|**Command Example**|**Function**|**Response** 767 +|AT+RX1WTO=?|Get RXwindows1 timeout|14((( 999 999 OK 1000 1000 ))) 1001 -| (% style="width:163px" %)AT+RX1WTO=60|(% style="width:201px" %)Set RXwindows1 timeout|(% style="width:93px" %)OK770 +|AT+RX1WTO=60|Set RXwindows1 timeout|OK 1002 1002 1003 -((( 1004 -**AT+RX1TWO** is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph. 1005 -))) 772 +AT+RX1TWO is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph. 1006 1006 1007 -[[image:image -20220526162535-1.png]]774 +[[~[~[image:https://wiki.dragino.com/images/thumb/5/51/RX1WTO.JPG/600px-RX1WTO.JPG~|~|alt="RX1WTO.JPG" height="239" width="600"~]~]>>url:https://wiki.dragino.com/index.php/File:RX1WTO.JPG]] 1008 1008 1009 -((( 1010 1010 Increasing thisvalue is equal to extending the time that the receiving window is opened, butthe corresponding power consumption will also increase. Properly increasingthis value can increase the success rate of the downlink. 1011 1011 1012 - 1013 -))) 1014 - 1015 1015 == 7.21 Get or Set RXwindows2 timeout == 1016 1016 1017 1017 Feature:Get or Set the number of symbols to detect and timeout from RXwindow2(0 to 255). 1018 1018 1019 -{{info}} 1020 -**AT Command: AT+RX2WTO** 1021 -{{/info}} 782 +AT Command: AT+RX2WTO 1022 1022 1023 -(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %) 1024 -|=(% colspan="3" style="width: 494px;" %)AT+ RX2WTO 1025 -|(% style="width:190px" %)**Command Example**|(% style="width:199px" %)**Function**|(% style="width:104px" %)**Response** 1026 -|(% style="width:190px" %)AT+RX2WTO=?|(% style="width:199px" %)Get RXwindows2 timeout|(% style="width:104px" %)7((( 784 +|=(% colspan="3" %)AT+ RX2WTO 785 +|**Command Example**|**Function**|**Response** 786 +|AT+RX2WTO=?|Get RXwindows2 timeout|7((( 1027 1027 OK 1028 1028 ))) 1029 -| (% style="width:190px" %)AT+RX2WTO=20|(% style="width:199px" %)Set RXwindows2 timeout|(% style="width:104px" %)OK789 +|AT+RX2WTO=20|Set RXwindows2 timeout|OK 1030 1030 1031 1031 == 7.22 Setting up uplinkdwelltime (as923, au915) == 1032 1032 1033 1033 Feature: Get or Set uplinkdwelltime 1034 1034 1035 -{{info}} 1036 -**AT Command: AT+DWELLT** 1037 -{{/info}} 795 +AT Command: AT+DWELLT 1038 1038 1039 -(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %) 1040 -|=(% colspan="3" style="width: 494px;" %)AT+DWELLT 1041 -|(% style="width:183px" %)**Command Example**|(% style="width:179px" %)**Function**|(% style="width:131px" %)**Response** 1042 -|(% style="width:183px" %)AT+DWELLT=?|(% style="width:179px" %)Get uplinkdwelltime|(% style="width:131px" %)1((( 797 +|=(% colspan="3" %)AT+DWELLT 798 +|**Command Example**|**Function**|**Response** 799 +|AT+DWELLT=?|Get uplinkdwelltime|1((( 1043 1043 OK 1044 1044 ))) 1045 -| (% style="width:183px" %)AT+DWELLT=0|(% style="width:179px" %)Set uplinkdwelltime|(% style="width:131px" %)OK802 +|AT+DWELLT=0|Set uplinkdwelltime|OK 1046 1046 1047 -{{info}} 1048 -**Downlink Command: 0x25** 1049 -{{/info}} 804 +Downlink Command: 0x25 1050 1050 1051 1051 Format: Command Code (0x25) followed by 1 bytes state value. 1052 1052 1053 1053 If the downlink payload=2501, it means set uplinkdwelltime to 1, while type code is 25. 1054 1054 1055 -* **Example 1**: Downlink Payload:**2501**~/~/ set uplinkdwelltime to 11056 -* **Example 2**: Downlink Payload:**2500**~/~/ set uplinkdwelltime to 0810 +* Example 1: Downlink Payload: 2501 ~/~/ set uplinkdwelltime to 1 811 +* Example 2: Downlink Payload: 2500 ~/~/ set uplinkdwelltime to 0 1057 1057 1058 1058 == 7.23 Set Packet Receiving Response Level == 1059 1059 ... ... @@ -1061,11 +1061,11 @@ 1061 1061 1062 1062 RPL value: 1063 1063 1064 -* **AT+RPL=0:**Device won't immediately reply any downlink commands from platform.1065 -* **AT+RPL=1:**Device will immediately reply message to Unconfirmed Data Down. Payload is 0x00.1066 -* **AT+RPL=2:**Device will immediately reply message to Confirmed Data Down. Payload is 0x00 and requied response header for this command.1067 -* **AT+RPL=3:**Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command.1068 -* **AT+RPL=4:**Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands.819 +* AT+RPL=0: Device won't immediately reply any downlink commands from platform. 820 +* AT+RPL=1: Device will immediately reply message to Unconfirmed Data Down. Payload is 0x00. 821 +* AT+RPL=2: Device will immediately reply message to Confirmed Data Down. Payload is 0x00 and requied response header for this command. 822 +* AT+RPL=3: Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command. 823 +* AT+RPL=4: Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands. 1069 1069 1070 1070 Case Analyes: 1071 1071 ... ... @@ -1073,44 +1073,37 @@ 1073 1073 * For Class C devices used in ChirpStack, need to set AT+RPL=4 because Chirpstack require immedietely reply message to MAC Command. 1074 1074 * For Class C devices used in TTI, need to set AT+RPL=4 because TTI require immediately reply message to Confirmed Data Down & MAC Command. 1075 1075 1076 -{{info}} 1077 -**AT Command: AT+RPL** 1078 -{{/info}} 831 +AT Command: AT+RPL 1079 1079 1080 -(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %) 1081 -|=(% colspan="3" style="width: 533px;" %)AT+RPL 1082 -|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response** 1083 -|(% style="width:160px" %)AT+RPL=?|(% style="width:263px" %)Get packet receiving response level|(% style="width:109px" %)1((( 833 +|=(% colspan="3" %)AT+RPL 834 +|**Command Example**|**Function**|**Response** 835 +|AT+RPL=?|Get packet receiving response level|1((( 1084 1084 OK 1085 1085 ))) 1086 -| (% style="width:160px" %)AT+RPL=0|(% style="width:263px" %)Set packet receiving response level|(% style="width:109px" %)OK838 +|AT+RPL=0|Set packet receiving response level|OK 1087 1087 1088 -{{info}} 1089 -**Downlink Command: 0x21** 1090 -{{/info}} 840 +Downlink Command: 0x21 1091 1091 1092 1092 Format: Command Code (0x21) followed by 1 bytes level value. 1093 1093 1094 1094 If the downlink payload=2101, it means set packet receiving response level to 1, while type code is 21. 1095 1095 1096 -* **Example 1**: Downlink Payload:**2101**~/~/ set packet receiving response level to 11097 -* **Example 2**: Downlink Payload:**2102**~/~/ set packet receiving response level to 2846 +* Example 1: Downlink Payload: 2101 ~/~/ set packet receiving response level to 1 847 +* Example 2: Downlink Payload: 2102 ~/~/ set packet receiving response level to 2 1098 1098 1099 1099 = 8. AT Commands Combination = 1100 1100 1101 1101 == 8.1 Set a fix RX2DR for downlink window == 1102 1102 1103 -* **AT+ADR=0**~-~-> Disable ADR first1104 -* **AT+RX2DR=xxxx**~-~-> Set xxxx to your wanted DataRate853 +* AT+ADR=0 ~-~-> Disable ADR first 854 +* AT+RX2DR=xxxx ~-~-> Set xxxx to your wanted DataRate 1105 1105 1106 1106 == 8.2 Use Downlink Command to set a fix uplink DR == 1107 1107 1108 -{{info}} 1109 -**Downlink Command: 0x22000500** 1110 -{{/info}} 858 +Downlink Command: 0x22000500 1111 1111 1112 1112 Same as: 1113 1113 1114 -* AT+ADR=0 ||anchor="H7.1AdaptiveDataRate"]]1115 -* AT+DR=5 ||anchor="H7.4DataRate"]]1116 -* AT+TXP=0 ||anchor="H7.14TransmitPower"]]862 +* AT+ADR=0 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Adaptive_Data_Rate]] 863 +* AT+DR=5 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Data_Rate]] 864 +* AT+TXP=0 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Transmit_Power]]
- image-20220511120050-1.png
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -XWiki.Xiaoling - Size
-
... ... @@ -1,1 +1,0 @@ 1 -136.3 KB - Content
- image-20220526162535-1.png
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -XWiki.Xiaoling - Size
-
... ... @@ -1,1 +1,0 @@ 1 -149.4 KB - Content