Last modified by kai on 2024/09/06 10:00
<
From version < 38.102 >
edited by Xiaoling
on 2022/06/01 11:53
To version < 7.8 >
edited by Xiaoling
on 2022/05/11 11:17
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,9 +1,8 @@
1 - **Contents：**
1 +Contens
2 2  
3 3  {{toc/}}
4 4  
5 5  
6 -
7 7  = 1. Introduction =
8 8  
9 9  Dragino LoRaWAN End Node support two types of AT Commands and Downlink Commands:
... ... @@ -11,95 +11,34 @@
11 11  * **Common Commands:** They should be available for each sensor, such as: change uplink interval, reset device.
12 12  * **Sensor Related Commands:** Only for special sensor, such as control relay, poll RS485 device.
13 13  
14 -(((
15 15  **This page shows the common commands since Dragino LoRaWAN stack DR-LWS-005. Make sure the end node support stack higher than DR-LWS-005 before checking this page.**
16 16  
17 -)))
18 18  
19 19  = 2. How to use AT Commands or Downlink command =
20 20  
21 21  * For AT Command , See Devices User Manual for Device. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
22 22  * For LoRaWAN Downlink: The gateway transfer downlink command in HEX format. This page shows the HEX format downlink code for each command. but some servers use base64 as downlink code. Below are reference for how to use downlink command:
23 -** Use HEX format to send a downlink: [[TTN v3>>Notes for TTN]]
24 -** Use Base64 format to send a downlink: [[Chirpstack>>Notes for ChirpStack]]
25 -** See use note for more serves [[Servers Note>>doc:Main.WebHome]](IoT LoRaWAN Server)
20 +** Use HEX format to send a downlink: [[TTN v3>>url:https://wiki.dragino.com/index.php/Notes_for_TTN#Send_Downlink_message]]
21 +** Use Base64 format to send a downlink: [[Chirpstack>>url:https://wiki.dragino.com/index.php/Notes_for_ChirpStack#Downlink]].
22 +** See use note for more serves [[Servers Note>>url:https://wiki.dragino.com/index.php/Main_Page#Use_Note_for_Server]]
26 26  
27 -
28 -
29 29  = 3. Support End Node and firmware version =
30 30  
31 -(% border="1" style="background-color:#ffffcc; color:green; width:966px" %)
32 -|=(% colspan="3" style="width: 963px;" %)(((
33 -Dragino STM32 base hardware Firmware / LoRaWAN stack list
34 -)))
35 -|(% style="width:187px" %)(((
36 -**Model**
37 -)))|(% style="width:330px" %)(((
38 -**Description**
39 -)))|(% style="width:445px" %)(((
40 -**Firmware Version <~-~-> Stack Version**
41 -)))
42 -|(% style="width:187px" %)(((
43 -[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],
44 -)))|(% style="width:330px" %)(((
45 -Open Source Generic LoRaWAN Sensor Node
46 -)))|(% style="width:445px" %)(((
47 -(((
48 -LSN50 v1.6.0 <~-~-> DR-LWS-003;
49 -)))
50 -
51 -(((
52 -(((
26 +(% style="background-color:#ffffcc; color:green; width:995.222px" %)
27 +|=(% colspan="3" style="width: 992px;" %)Dragino STM32 base hardware Firmware / LoRaWAN stack list
28 +|(% style="width:187px" %)**Model**|(% style="width:349px" %)**Description**|(% style="width:453px" %)**Firmware Version <~-~-> Stack Version**
29 +|(% style="width:187px" %)[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],|(% style="width:349px" %)Open Source Generic LoRaWAN Sensor Node|(% style="width:453px" %)LSN50 v1.6.0 <~-~-> DR-LWS-003;(((
53 53  LSN50 v1.7.0 <~-~-> DR-LWS-005; ~-~-> Support since this version
54 54  )))
55 -)))
56 -)))
57 -|(% style="width:187px" %)(((
58 -[[LGT92>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/142-lgt-92.html]],
59 -)))|(% style="width:330px" %)(((
60 -LoRaWAN GPS Tracker
61 -)))|(% style="width:445px" %)(((
62 -(((
63 -LGT92 v1.6.3 <~-~-> DR-LWS-003;
64 -)))
65 -
66 -(((
67 -(((
32 +|(% style="width:187px" %)[[LGT92>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/142-lgt-92.html]],|(% style="width:349px" %)LoRaWAN GPS Tracker|(% style="width:453px" %)LGT92 v1.6.3 <~-~-> DR-LWS-003;(((
68 68  LGT92 v1.6.4 <~-~-> DR-LWS-005;~-~-> Support since this version
69 69  )))
70 -)))
71 -)))
72 -|(% style="width:187px" %)(((
73 -[[LBT1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/165-lbt1.html]],
74 -)))|(% style="width:330px" %)(((
75 -LoRaWAN BLE Indoor Tracker
76 -)))|(% style="width:445px" %)(((
77 -LBT1 v1.0 <~-~-> DR-LWS-005;
78 -)))
79 -|(% style="width:187px" %)(((
80 -[[RS485-LN>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/154-rs485-ln.html]],
81 -)))|(% style="width:330px" %)(((
82 -LoRaWAN RS485 Modbus Converter
83 -)))|(% style="width:445px" %)(((
84 -RS485-LN v1.3 <~-~-> DR-LWS-005;
85 -)))
86 -|(% style="width:187px" %)(((
87 -[[LHT65>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/151-lht65.html]],
88 -)))|(% style="width:330px" %)(((
89 -LoRaWAN Temperature & Humidity Sensor
90 -)))|(% style="width:445px" %)(((
91 -(((
92 -LHT65 v1.7 <~-~-> DR-LWS-003;
93 -)))
94 -
95 -(((
96 -(((
35 +|(% style="width:187px" %)[[LBT1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/165-lbt1.html]],|(% style="width:349px" %)LoRaWAN BLE Indoor Tracker|(% style="width:453px" %)LBT1 v1.0 <~-~-> DR-LWS-005;
36 +|(% style="width:187px" %)[[RS485-LN>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/154-rs485-ln.html]],|(% style="width:349px" %)LoRaWAN RS485 Modbus Converter|(% style="width:453px" %)RS485-LN v1.3 <~-~-> DR-LWS-005;
37 +|(% style="width:187px" %)[[LHT65>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/151-lht65.html]],|(% style="width:349px" %)LoRaWAN Temperature & Humidity Sensor|(% style="width:453px" %)LHT65 v1.7 <~-~-> DR-LWS-003;(((
97 97  LHT65 v1.8.0 <~-~-> DR-LWS-005;~-~-> Support since this version
98 98  )))
99 -)))
100 -)))
101 101  
102 -
103 103  = 4. System Management Commands =
104 104  
105 105  == 4.1 Change Uplink Interval ==
... ... @@ -111,7 +111,7 @@
111 111  **AT Command: AT+TDC**
112 112  )))
113 113  
114 -(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
52 +(% style="background-color:#ffffcc; color:green; width:727.222px" %)
115 115  |=(% colspan="3" style="width: 724px;" %)AT+TDC
116 116  |(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
117 117  |(% style="width:165px" %)AT+TDC=?|(% style="width:227px" %)Show current transmit Interval|(% style="width:329px" %)30000(((
... ... @@ -127,13 +127,9 @@
127 127  **Downlink Command: 0x01**
128 128  {{/info}}
129 129  
130 -(((
131 131  Format: Command Code (0x01) followed by 3 bytes time value.
132 -)))
133 133  
134 -(((
135 135  If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
136 -)))
137 137  
138 138  * **Example 1**: Downlink Payload:** 0100001E** ~/~/ Set Transmit Interval (TDC) = 30 seconds
139 139  * **Example 2**: Downlink Payload:** 0100003C** ~/~/ Set Transmit Interval (TDC) = 60 seconds
... ... @@ -146,7 +146,7 @@
146 146  **AT Command: ATZ**
147 147  {{/info}}
148 148  
149 -(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
83 +(% border="0" style="background-color:#ffffcc; color:green; width:727.222px" %)
150 150  |=(% colspan="3" %)ATZ: Trig a reset of the MCU
151 151  |**Command Example**|**Function**|**Response**
152 152  |ATZ|Reset MCU|(((
... ... @@ -167,16 +167,10 @@
167 167  **Downlink Command: 0x04**
168 168  {{/info}}
169 169  
170 -(((
171 171  Format: Command Code (0x04) followed by FF.
172 -)))
173 173  
174 -(((
175 175  If the downlink payload=**04FF**, the end node will reboot.
176 176  
177 -
178 -)))
179 -
180 180  == 4.3 Reset to factory Default ==
181 181  
182 182  Feature: Reset the parameters to Factory Default, factory default value depends on the firmware settings, the OTAA and ABP keys will reserve after this command.
... ... @@ -185,7 +185,7 @@
185 185  **AT Command: AT+FDR**
186 186  {{/info}}
187 187  
188 -(% border="1" style="background-color:#ffffcc; color:green; width:831.222px" %)
116 +(% style="background-color:#ffffcc; color:green; width:831.222px" %)
189 189  |=(% colspan="3" style="width: 828px;" %)Reset to factory default
190 190  |(% style="width:181px" %)**Command Example**|(% style="width:181px" %)**Function**|(% style="width:465px" %)**Response**
191 191  |(% style="width:181px" %)AT+FDR|(% style="width:181px" %)Reset to factory default|(% style="width:465px" %)(((
... ... @@ -206,13 +206,9 @@
206 206  **Downlink Command: 0x04**
207 207  {{/info}}
208 208  
209 -(((
210 210  Format: Command Code (0x04) followed by FE.
211 -)))
212 212  
213 -(((
214 214  If the downlink payload=**04FE**, Reset Parameters to Factory Default, Keys Reserve.
215 -)))
216 216  
217 217  
218 218  == 4.4 Show Firmware Version ==
... ... @@ -223,10 +223,10 @@
223 223  **AT Command: AT+VER**
224 224  {{/info}}
225 225  
226 -(% border="1" style="background-color:#ffffcc; color:green; width:586px" %)
227 -|=(% colspan="3" style="width: 583px;" %)AT+VER: Image Version and Frequency Band
228 -|(% style="width:170px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:113px" %)**Response**
229 -|(% style="width:170px" %)AT+VER=?|(% style="width:300px" %)Show Image version and Frequency Band|(% style="width:113px" %)(((
150 +(% style="background-color:#ffffcc; color:green" %)
151 +|=(% colspan="3" %)AT+VER: Image Version and Frequency Band
152 +|**Command Example**|**Function**|**Response**
153 +|AT+VER=?|Show Image version and Frequency Band|(((
230 230  1.3 EU868
231 231  
232 232  OK
... ... @@ -236,25 +236,17 @@
236 236  **Downlink Command: 0x26 (Valid in 006 stack)**
237 237  {{/info}}
238 238  
239 -(((
240 240  Downlink Format: 0x26
241 -)))
242 242  
243 -(((
244 244  Device will reply with firmware version info, device info. frequency band info. detail please check device user manual. Total 5 bytes Example: If device is of firmware version 1.1.0 Upload: xx ~-~- yy ~-~- zz ~-~- 110 total 5 bytes
245 -)))
246 246  
247 -(((
248 248  **xx: Software Type:**
249 -)))
250 250  
251 251  * 0x00 01: LGT92 Version
252 252  * 0x00 02: LBT1
253 253  * 0x00 03: LSE01/LDDS75/LDDS20/LSPH01/LLMS01/LSNPK01
254 254  
255 -(((
256 256  **yy: Frequency Band:**
257 -)))
258 258  
259 259  * 0x01: EU868
260 260  * 0x02: US915
... ... @@ -267,9 +267,7 @@
267 267  * 0x09: AS923-2
268 268  * 0xa0: AS923-3
269 269  
270 -(((
271 271  **zz: Subband**
272 -)))
273 273  
274 274  firmware version: v1.1.0 ~-~-> 110
275 275  
... ... @@ -282,7 +282,7 @@
282 282  **AT Command: AT+CFG**
283 283  {{/info}}
284 284  
285 -(% border="1" style="background-color:#ffffcc; color:green; width:599.222px" %)
199 +(% style="background-color:#ffffcc; color:green; width:599.222px" %)
286 286  |=(% colspan="3" style="width: 596px;" %)AT+CFG: Print all configurations
287 287  |(% style="width:160px" %)**Command Example**|(% style="width:154px" %)**Function**|(% style="width:280px" %)**Response**
288 288  |(% style="width:160px" %)AT+CFG|(% style="width:154px" %)Show all configures|(% style="width:280px" %)(((
... ... @@ -309,7 +309,7 @@
309 309  **AT Command: AT+APPEUI**
310 310  {{/info}}
311 311  
312 -(% border="1" style="background-color:#ffffcc; color:green; width:686.222px" %)
226 +(% style="background-color:#ffffcc; color:green; width:686.222px" %)
313 313  |=(% colspan="3" style="width: 683px;" %)AT+APPEUI
314 314  |(% style="width:305px" %)**Command Example**|(% style="width:186px" %)**Function**|(% style="width:191px" %)**Response**
315 315  |(% style="width:305px" %)AT+APPEUI=?|(% style="width:186px" %)Get the Application EUI|(% style="width:191px" %)00 b3 d5 00 00 00 00 00(((
... ... @@ -325,7 +325,7 @@
325 325  **AT Command: AT+APPKEY**
326 326  {{/info}}
327 327  
328 -(% border="1" style="background-color:#ffffcc; color:green; width:976.222px" %)
242 +(% style="background-color:#ffffcc; color:green; width:976.222px" %)
329 329  |=(% colspan="3" style="width: 973px;" %)AT+APPKEY
330 330  |(% style="width:441px" %)**Command Example**|(% style="width:180px" %)**Function**|(% style="width:350px" %)**Response**
331 331  |(% style="width:441px" %)AT+APPKEY=?|(% style="width:180px" %)Get the Application Key|(% style="width:350px" %)00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35(((
... ... @@ -341,7 +341,7 @@
341 341  **AT Command: AT+APPSKEY**
342 342  {{/info}}
343 343  
344 -(% border="1" style="background-color:#ffffcc; color:green; width:1040.22px" %)
258 +(% style="background-color:#ffffcc; color:green; width:1040.22px" %)
345 345  |=(% colspan="3" style="width: 1037px;" %)AT+APPSKEY
346 346  |(% style="width:451px" %)**Command Example**|(% style="width:231px" %)**Function**|(% style="width:354px" %)**Response**
347 347  |(% style="width:451px" %)AT+APPSKEY=?|(% style="width:231px" %)Get the Application Session Key|(% style="width:354px" %)00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2(((
... ... @@ -359,7 +359,7 @@
359 359  **AT Command: AT+DADDR**
360 360  {{/info}}
361 361  
362 -(% border="1" style="background-color:#ffffcc; color:green; width:795.222px" %)
276 +(% style="background-color:#ffffcc; color:green; width:795.222px" %)
363 363  |=(% colspan="3" style="width: 792px;" %)AT+DADDR
364 364  |(% style="width:192px" %)**Command Example**|(% style="width:241px" %)**Function**|(% style="width:359px" %)**Response**
365 365  |(% style="width:192px" %)AT+DADDR=?|(% style="width:241px" %)Get the Application Session Key.|(% style="width:359px" %)(While Error in format, return AT_PARAM_ERROR)(((
... ... @@ -377,7 +377,7 @@
377 377  **AT Command: AT+DEUI**
378 378  {{/info}}
379 379  
380 -(% border="1" style="background-color:#ffffcc; color:green; width:1035.22px" %)
294 +(% style="background-color:#ffffcc; color:green; width:1035.22px" %)
381 381  |=(% colspan="3" style="width: 1032px;" %)AT+DEUI
382 382  |(% style="width:250px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:634px" %)**Response**
383 383  |(% style="width:250px" %)AT+DEUI=?|(% style="width:147px" %)Get the Device EUI.|(% style="width:634px" %)00 44 34 22 33 45 55 55(((
... ... @@ -395,7 +395,7 @@
395 395  **AT Command: AT+NWKID**
396 396  {{/info}}
397 397  
398 -(% border="1" style="background-color:#ffffcc; color:green; width:448.222px" %)
312 +(% style="background-color:#ffffcc; color:green; width:448.222px" %)
399 399  |=(% colspan="3" style="width: 445px;" %)AT+NWKID
400 400  |(% style="width:191px" %)**Command Example**|(% style="width:153px" %)**Function**|(% style="width:101px" %)**Response**
401 401  |(% style="width:191px" %)AT+NWKID=?|(% style="width:153px" %)Get the Network ID.|(% style="width:101px" %)a8 40 41 ff(((
... ... @@ -411,7 +411,7 @@
411 411  **AT Command: AT+NWKSKEY**
412 412  {{/info}}
413 413  
414 -(% border="1" style="background-color:#ffffcc; color:green; width:1017.22px" %)
328 +(% style="background-color:#ffffcc; color:green; width:1017.22px" %)
415 415  |=(% colspan="3" style="width: 1014px;" %)AT+NWKSKEY
416 416  |(% style="width:455px" %)**Command Example**|(% style="width:215px" %)**Function**|(% style="width:343px" %)**Response**
417 417  |(% style="width:455px" %)AT+NWKSKEY=?|(% style="width:215px" %)Get the Network Session Key.|(% style="width:343px" %)00 4f 19 25 52 ce 97 09 d7 fa 84 71 db 51 02 92(((
... ... @@ -429,7 +429,7 @@
429 429  **AT Command: AT+CFM**
430 430  {{/info}}
431 431  
432 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
346 +(% style="background-color:#ffffcc; color:green; width:710.222px" %)
433 433  |=(% colspan="3" style="width: 707px;" %)AT+CFM
434 434  |(% style="width:155px" %)**Command Example**|(% style="width:205px" %)**Function**|(% style="width:346px" %)**Response**
435 435  |(% style="width:155px" %)AT+CFM=?|(% style="width:205px" %)Get the confirmation mode|(% style="width:346px" %)0(((
... ... @@ -455,7 +455,7 @@
455 455  **AT Command: AT+CFS**
456 456  {{/info}}
457 457  
458 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
372 +(% style="background-color:#ffffcc; color:green; width:534.222px" %)
459 459  |=(% colspan="3" style="width: 531px;" %)AT+CFS
460 460  |(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:178px" %)**Response**
461 461  |(% style="width:156px" %)AT+CFS=?|(% style="width:193px" %)Get confirmation status|(% style="width:178px" %)0(((
... ... @@ -470,7 +470,7 @@
470 470  **AT Command: AT+JOIN**
471 471  {{/info}}
472 472  
473 -(% border="1" style="background-color:#ffffcc; color:green; width:647.222px" %)
387 +(% style="background-color:#ffffcc; color:green; width:647.222px" %)
474 474  |=(% colspan="3" style="width: 644px;" %)AT+JOIN
475 475  |(% style="width:163px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:334px" %)**Response**
476 476  |(% style="width:163px" %)AT+JOIN ?|(% style="width:147px" %)Get imformation.|(% style="width:334px" %)AT+JOIN: Join network(((
... ... @@ -487,7 +487,7 @@
487 487  **AT Command: AT+NJM**
488 488  {{/info}}
489 489  
490 -(% border="1" style="background-color:#ffffcc; color:green; width:753.222px" %)
404 +(% style="background-color:#ffffcc; color:green; width:753.222px" %)
491 491  |=(% colspan="3" style="width: 750px;" %)AT+NJM
492 492  |(% style="width:162px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:361px" %)**Response**
493 493  |(% style="width:162px" %)AT+NJM=?|(% style="width:227px" %)Get the Network Join Mode|(% style="width:361px" %)1(((
... ... @@ -515,7 +515,7 @@
515 515  **AT Command: AT+NJS**
516 516  {{/info}}
517 517  
518 -(% border="1" style="background-color:#ffffcc; color:green; width:498.222px" %)
432 +(% style="background-color:#ffffcc; color:green; width:498.222px" %)
519 519  |=(% colspan="3" style="width: 495px;" %)AT+NJS
520 520  |(% style="width:169px" %)**Command Example**|(% style="width:164px" %)**Function**|(% style="width:161px" %)**Response**
521 521  |(% style="width:169px" %)AT+NJS=?|(% style="width:164px" %)Get the join status.|(% style="width:161px" %)0(((
... ... @@ -530,7 +530,7 @@
530 530  **AT Command: AT+RECV**
531 531  {{/info}}
532 532  
533 -(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
447 +(% style="background-color:#ffffcc; color:green; width:587.222px" %)
534 534  |=(% colspan="3" style="width: 584px;" %)AT+RECV
535 535  |(% style="width:161px" %)**Command Example**|(% style="width:272px" %)**Function**|(% style="width:150px" %)**Response**
536 536  |(% style="width:161px" %)AT+RECV=?|(% style="width:272px" %)print last received data in raw format.|(% style="width:150px" %)0:(((
... ... @@ -545,7 +545,7 @@
545 545  **AT Command: AT+RECVB**
546 546  {{/info}}
547 547  
548 -(% border="1" style="background-color:#ffffcc; color:green; width:793.222px" %)
462 +(% style="background-color:#ffffcc; color:green; width:793.222px" %)
549 549  |=(% colspan="3" style="width: 790px;" %)AT+RECVB
550 550  |(% style="width:173px" %)**Command Example**|(% style="width:497px" %)**Function**|(% style="width:120px" %)**Response**
551 551  |(% style="width:173px" %)AT+RECVB=?|(% style="width:497px" %)print last received data in binary format (with hexadecimal values).|(% style="width:120px" %)2: 0010(((
... ... @@ -560,7 +560,7 @@
560 560  **AT Command: AT+SEND**
561 561  {{/info}}
562 562  
563 -(% border="1" style="background-color:#ffffcc; color:green; width:991.222px" %)
477 +(% style="background-color:#ffffcc; color:green; width:991.222px" %)
564 564  |=(% colspan="3" style="width: 988px;" %)AT+SEND
565 565  |(% style="width:201px" %)**Command Example**|(% style="width:340px" %)**Function**|(% style="width:446px" %)**Response**
566 566  |(% style="width:201px" %)AT+SEND=12:hello world|(% style="width:340px" %)Send text data along with the application port.|(% style="width:446px" %)OK(((
... ... @@ -579,7 +579,7 @@
579 579  **AT Command: AT+SENDB**
580 580  {{/info}}
581 581  
582 -(% border="1" style="background-color:#ffffcc; color:green; width:1120.22px" %)
496 +(% style="background-color:#ffffcc; color:green; width:1120.22px" %)
583 583  |=(% colspan="3" style="width: 1117px;" %)AT+SENDB
584 584  |(% style="width:257px" %)**Command Example**|(% style="width:406px" %)**Function**|(% style="width:453px" %)**Response**
585 585  |(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)OK
... ... @@ -599,7 +599,7 @@
599 599  **AT Command: AT+ADR**
600 600  {{/info}}
601 601  
602 -(% border="1" style="background-color:#ffffcc; color:green; width:683.222px" %)
516 +(% style="background-color:#ffffcc; color:green; width:683.222px" %)
603 603  |=(% colspan="3" style="width: 680px;" %)AT+ADR
604 604  |(% style="width:162px" %)**Command Example**|(% style="width:266px" %)**Function**|(% style="width:250px" %)**Response**
605 605  |(% style="width:162px" %)AT+ADR=?|(% style="width:266px" %)Get the Adaptive Data Rate setting.|(% style="width:250px" %)1(((
... ... @@ -628,7 +628,7 @@
628 628  **AT Command:AT+CLASS**
629 629  {{/info}}
630 630  
631 -(% border="1" style="background-color:#ffffcc; color:green; width:507.222px" %)
545 +(% style="background-color:#ffffcc; color:green; width:507.222px" %)
632 632  |=(% colspan="3" style="width: 504px;" %)AT+CLASS
633 633  |(% style="width:163px" %)**Command Example**|(% style="width:166px" %)**Function**|(% style="width:175px" %)**Response**
634 634  |(% style="width:163px" %)AT+CLASS=?|(% style="width:166px" %)Get the Device Class.|(% style="width:175px" %)A(((
... ... @@ -646,7 +646,7 @@
646 646  **AT Command:AT+DCS**
647 647  {{/info}}
648 648  
649 -(% border="1" style="background-color:#ffffcc; color:green; width:515.222px" %)
563 +(% style="background-color:#ffffcc; color:green; width:515.222px" %)
650 650  |=(% colspan="3" style="width: 512px;" %)AT+DCS
651 651  |(% style="width:165px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:107px" %)**Response**
652 652  |(% style="width:165px" %)AT+DCS=?|(% style="width:239px" %)Get the ETSI Duty Cycle setting.|(% style="width:107px" %)1(((
... ... @@ -664,7 +664,7 @@
664 664  **AT Command: AT+DR**
665 665  {{/info}}
666 666  
667 -(% border="1" style="background-color:#ffffcc; color:green; width:466.222px" %)
581 +(% style="background-color:#ffffcc; color:green; width:466.222px" %)
668 668  |=(% colspan="3" style="width: 463px;" %)AT+DR
669 669  |(% style="width:156px" %)**Command Example**|(% style="width:167px" %)**Function**|(% style="width:140px" %)**Response**
670 670  |(% style="width:156px" %)AT+DR=?|(% style="width:167px" %)Get the Data Rate.|(% style="width:140px" %)5(((
... ... @@ -692,7 +692,7 @@
692 692  **AT Command:AT+FCD**
693 693  {{/info}}
694 694  
695 -(% border="1" style="background-color:#ffffcc; color:green; width:693.222px" %)
609 +(% style="background-color:#ffffcc; color:green; width:693.222px" %)
696 696  |=(% colspan="3" style="width: 690px;" %)AT+FCD
697 697  |(% style="width:162px" %)**Command Example**|(% style="width:258px" %)**Function**|(% style="width:269px" %)**Response**
698 698  |(% style="width:162px" %)AT+FCD=?|(% style="width:258px" %)Get the Frame Counter Downlink.|(% style="width:269px" %)0(((
... ... @@ -712,7 +712,7 @@
712 712  **AT Command:AT+FCU**
713 713  {{/info}}
714 714  
715 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
629 +(% style="background-color:#ffffcc; color:green; width:534.222px" %)
716 716  |=(% colspan="3" style="width: 531px;" %)AT+FCU
717 717  |(% style="width:177px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:113px" %)**Response**
718 718  |(% style="width:177px" %)AT+FCU=?|(% style="width:239px" %)Get the Frame Counter Uplink.|(% style="width:113px" %)0(((
... ... @@ -730,7 +730,7 @@
730 730  **AT Command:AT+JN1DL**
731 731  {{/info}}
732 732  
733 -(% border="1" style="background-color:#ffffcc; color:green; width:537.222px" %)
647 +(% style="background-color:#ffffcc; color:green; width:537.222px" %)
734 734  |=(% colspan="3" style="width: 534px;" %)AT+JN1DL
735 735  |(% style="width:164px" %)**Command Example**|(% style="width:229px" %)**Function**|(% style="width:140px" %)**Response**
736 736  |(% style="width:164px" %)AT+JN1DL=?|(% style="width:229px" %)Get the Join Accept Delay.|(% style="width:140px" %)5000(((
... ... @@ -748,7 +748,7 @@
748 748  **AT Command:AT+JN2DL**
749 749  {{/info}}
750 750  
751 -(% border="1" style="background-color:#ffffcc; color:green; width:538.222px" %)
665 +(% style="background-color:#ffffcc; color:green; width:538.222px" %)
752 752  |=(% colspan="3" style="width: 535px;" %)AT+JN2DL
753 753  |(% style="width:160px" %)**Command Example**|(% style="width:228px" %)**Function**|(% style="width:146px" %)**Response**
754 754  |(% style="width:160px" %)AT+JN2DL=?|(% style="width:228px" %)Get the Join Accept Delay.|(% style="width:146px" %)6000(((
... ... @@ -766,7 +766,7 @@
766 766  **AT Command:AT+PNM**
767 767  {{/info}}
768 768  
769 -(% border="1" style="background-color:#ffffcc; color:green; width:667.222px" %)
683 +(% style="background-color:#ffffcc; color:green; width:667.222px" %)
770 770  |=(% colspan="3" style="width: 664px;" %)AT+PNM
771 771  |(% style="width:166px" %)**Command Example**|(% style="width:225px" %)**Function**|(% style="width:272px" %)**Response**
772 772  |(% style="width:166px" %)AT+PNM=?|(% style="width:225px" %)Get the public network mode.|(% style="width:272px" %)1(((
... ... @@ -786,7 +786,7 @@
786 786  **AT Command:AT+RX1DL**
787 787  {{/info}}
788 788  
789 -(% border="1" style="background-color:#ffffcc; color:green; width:408.222px" %)
703 +(% style="background-color:#ffffcc; color:green; width:408.222px" %)
790 790  |=(% colspan="3" style="width: 405px;" %)AT+RX1DL
791 791  |(% style="width:155px" %)**Command Example**|(% style="width:128px" %)**Function**|(% style="width:122px" %)**Response**
792 792  |(% style="width:155px" %)AT+RX1DL=?|(% style="width:128px" %)Get the delay.|(% style="width:122px" %)1000(((
... ... @@ -796,21 +796,18 @@
796 796  
797 797  )))
798 798  
799 -== 7.11 Receive Delay2 ==
713 +== 7.11Receive Delay2 ==
800 800  
801 801  Feature: Get or Set the delay between the end of the Tx and the Rx Window 2 in ms
802 802  
803 -{{info}}
804 -**AT Command:AT+RX2DL**
805 -{{/info}}
717 +AT Command:AT+RX2DL
806 806  
807 -(% border="1" style="background-color:#ffffcc; color:green; width:481.222px" %)
808 -|=(% colspan="3" style="width: 478px;" %)AT+RX2DL
809 -|(% style="width:175px" %)**Command Example**|(% style="width:152px" %)**Function**|(% style="width:150px" %)**Response**
810 -|(% style="width:175px" %)AT+RX2DL=?|(% style="width:152px" %)Get the delay.|(% style="width:150px" %)2000(((
719 +|=(% colspan="3" %)AT+RX2DL
720 +|**Command Example**|**Function**|**Response**
721 +|AT+RX2DL=?|Get the delay.|2000(((
811 811  OK
812 812  )))
813 -|(% style="width:175px" %)AT+RX2DL=2500|(% style="width:152px" %)Set the delay.|(% style="width:150px" %)OK(((
724 +|AT+RX2DL=2500|Set the delay.|OK(((
814 814  
815 815  )))
816 816  
... ... @@ -818,17 +818,14 @@
818 818  
819 819  Feature: Get or Set the Rx2 window data rate (0-7 corresponding to DR_X)
820 820  
821 -{{info}}
822 -**AT Command:AT+RX2DR**
823 -{{/info}}
732 +AT Command:AT+RX2DR
824 824  
825 -(% border="1" style="background-color:#ffffcc; color:green; width:525.222px" %)
826 -|=(% colspan="3" style="width: 522px;" %)AT+RX2DR
827 -|(% style="width:160px" %)**Command Example**|(% style="width:232px" %)**Function**|(% style="width:130px" %)**Response**
828 -|(% style="width:160px" %)AT+RX2DR=?|(% style="width:232px" %)Get the Rx2 window data rate.|(% style="width:130px" %)2(((
734 +|=(% colspan="3" %)AT+RX2DR
735 +|**Command Example**|**Function**|**Response**
736 +|AT+RX2DR=?|Get the Rx2 window data rate.|2(((
829 829  OK
830 830  )))
831 -|(% style="width:160px" %)AT+RX2DR=6|(% style="width:232px" %)Set the Rx2 window data rate.|(% style="width:130px" %)OK(((
739 +|AT+RX2DR=6|Set the Rx2 window data rate.|OK(((
832 832  
833 833  )))
834 834  
... ... @@ -836,17 +836,14 @@
836 836  
837 837  Feature: Get or Set the Rx2 window frequency
838 838  
839 -{{info}}
840 -**AT Command:AT+RX2FQ**
841 -{{/info}}
747 +AT Command:AT+RX2FQ
842 842  
843 -(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
844 -|=(% colspan="3" style="width: 584px;" %)AT+RX2FQ
845 -|(% style="width:183px" %)**Command Example**|(% style="width:240px" %)**Function**|(% style="width:160px" %)**Response**
846 -|(% style="width:183px" %)AT+RX2FQ=?|(% style="width:240px" %)Get the Rx2 window frequency.|(% style="width:160px" %)434665000(((
749 +|=(% colspan="3" %)AT+RX2FQ
750 +|**Command Example**|**Function**|**Response**
751 +|AT+RX2FQ=?|Get the Rx2 window frequency.|434665000(((
847 847  OK
848 848  )))
849 -|(% style="width:183px" %)AT+RX2FQ=434665000|(% style="width:240px" %)Set the Rx2 window frequency.|(% style="width:160px" %)OK(((
754 +|AT+RX2FQ=434665000|Set the Rx2 window frequency.|OK(((
850 850  
851 851  )))
852 852  
... ... @@ -854,17 +854,14 @@
854 854  
855 855  Feature: Get or Set the Transmit Power(0-5, MAX:0, MIN:5, according to LoRaWAN Spec, or 40=10dB, 41 = 11dB, …, 50 = 20dB which is out of LoRaWAN spec. )
856 856  
857 -{{info}}
858 -**AT Command:AT+TXP**
859 -{{/info}}
762 +AT Command:AT+TXP
860 860  
861 -(% border="1" style="background-color:#ffffcc; color:green; width:465.222px" %)
862 -|=(% colspan="3" style="width: 462px;" %)AT+TXP
863 -|(% style="width:161px" %)**Command Example**|(% style="width:189px" %)**Function**|(% style="width:112px" %)**Response**
864 -|(% style="width:161px" %)AT+TXP=?|(% style="width:189px" %)Get the Transmit Power.|(% style="width:112px" %)0(((
764 +|=(% colspan="3" %)AT+TXP
765 +|**Command Example**|**Function**|**Response**
766 +|AT+TXP=?|Get the Transmit Power.|0(((
865 865  OK
866 866  )))
867 -|(% style="width:161px" %)AT+TXP=1|(% style="width:189px" %)Set the Transmit Power.|(% style="width:112px" %)OK(((
769 +|AT+TXP=1|Set the Transmit Power.|OK(((
868 868  
869 869  )))
870 870  
... ... @@ -872,21 +872,18 @@
872 872  
873 873  If the downlink payload=22000100, it means setting the TXP to 0.
874 874  
875 -* **Example 1**: Downlink Payload: **22000102** ~/~/ Set AT+TXP=2.
876 -* **Example 2**: Downlink Payload: **220000FF** ~/~/ Set AT+TXP=0.
777 +* Example 1: Downlink Payload: 22000102 ~/~/ Set AT+TXP=2.
778 +* Example 2: Downlink Payload: 220000FF ~/~/ Set AT+TXP=0.
877 877  
878 878  == 7.15 RSSI of the Last Received Packet ==
879 879  
880 880  Feature: Get or Set the Rx2 window frequency
881 881  
882 -{{info}}
883 -**AT Command:AT+RSSI**
884 -{{/info}}
784 +AT Command:AT+RSSI
885 885  
886 -(% border="1" style="background-color:#ffffcc; color:green; width:557.222px" %)
887 -|=(% colspan="3" style="width: 554px;" %)AT+RSSI
888 -|(% style="width:164px" %)**Command Example**|(% style="width:289px" %)**Function**|(% style="width:100px" %)**Response**
889 -|(% style="width:164px" %)AT+RSSI=?|(% style="width:289px" %)Get the RSSI of the last received packet.|(% style="width:100px" %)0(((
786 +|=(% colspan="3" %)AT+RSSI
787 +|**Command Example**|**Function**|**Response**
788 +|AT+RSSI=?|Get the RSSI of the last received packet.|0(((
890 890  OK
891 891  )))
892 892  
... ... @@ -894,14 +894,11 @@
894 894  
895 895  Feature: Get the SNR of the last received packet
896 896  
897 -{{info}}
898 -**AT Command:AT+SNR**
899 -{{/info}}
796 +AT Command:AT+SNR
900 900  
901 -(% border="1" style="background-color:#ffffcc; color:green; width:571.222px" %)
902 -|=(% colspan="3" style="width: 568px;" %)AT+SNR
903 -|(% style="width:164px" %)**Command Example**|(% style="width:290px" %)**Function**|(% style="width:113px" %)**Response**
904 -|(% style="width:164px" %)AT+SNR=?|(% style="width:290px" %)Get the RSSI of the last received packet.|(% style="width:113px" %)0(((
798 +|=(% colspan="3" %)AT+SNR
799 +|**Command Example**|**Function**|**Response**
800 +|AT+SNR=?|Get the RSSI of the last received packet.|0(((
905 905  OK
906 906  )))
907 907  
... ... @@ -909,144 +909,114 @@
909 909  
910 910  Feature: Get or set the application port.
911 911  
912 -{{info}}
913 -**AT Command: AT+PORT**
914 -{{/info}}
808 +AT Command: AT+PORT
915 915  
916 -(% border="1" style="background-color:#ffffcc; color:green; width:500.222px" %)
917 -|=(% colspan="3" style="width: 497px;" %)AT+PORT
918 -|(% style="width:157px" %)**Command Example**|(% style="width:204px" %)**Function**|(% style="width:135px" %)**Response**
919 -|(% style="width:157px" %)AT+PORT=?|(% style="width:204px" %)Get the application port|(% style="width:135px" %)21(((
810 +|=(% colspan="3" %)AT+PORT
811 +|**Command Example**|**Function**|**Response**
812 +|AT+PORT=?|Get the application port|21(((
920 920  OK
921 921  )))
922 -|(% style="width:157px" %)AT+PORT=21|(% style="width:204px" %)Set the application port|(% style="width:135px" %)OK
815 +|AT+PORT=21|Set the application port|OK
923 923  
924 -{{info}}
925 -**Downlink Command: 0x23**
926 -{{/info}}
817 +Downlink Command: 0x23
927 927  
928 928  Format: Command Code (0x23) followed by 1 bytes port value.
929 929  
930 930  If the downlink payload=2301, it means set the application port to 1, while type code is 23.
931 931  
932 -* **Example 1**: Downlink Payload: **2301** ~/~/ set the application port to 1
933 -* **Example 2**: Downlink Payload:** 2305** ~/~/ set the application port to 5
823 +* Example 1: Downlink Payload: 2301 ~/~/ set the application port to 1
824 +* Example 2: Downlink Payload: 2305 ~/~/ set the application port to 5
934 934  
935 935  == 7.18 Single Channel Mode ==
936 936  
937 937  Feature:Get or Set Frequency (Unit: Hz) for Single Channel Mode.
938 938  
939 -{{info}}
940 -**AT Command: AT+CHS**
941 -{{/info}}
830 +AT Command: AT+CHS
942 942  
943 -(% border="1" style="background-color:#ffffcc; color:green; width:603.222px" %)
944 -|=(% colspan="3" style="width: 600px;" %)AT+CHS
945 -|(% style="width:182px" %)**Command Example**|(% style="width:295px" %)**Function**|(% style="width:122px" %)**Response**
946 -|(% style="width:182px" %)AT+CHS=?|(% style="width:295px" %)Get Frequency for Single Channel Mode|(% style="width:122px" %)0(((
832 +|=(% colspan="3" %)AT+CHS
833 +|**Command Example**|**Function**|**Response**
834 +|AT+CHS=?|Get Frequency for Single Channel Mode|0(((
947 947  OK
948 948  )))
949 -|(% style="width:182px" %)AT+CHS=868100000|(% style="width:295px" %)Set Frequency for Single Channel Mode|(% style="width:122px" %)OK
837 +|AT+CHS=868100000|Set Frequency for Single Channel Mode|OK
950 950  
951 951  == 7.19 Eight Channel Mode ==
952 952  
953 953  Feature: Get or Set eight channels mode,Only for US915,AU915,CN470.
954 954  
955 -{{info}}
956 -**AT Command: AT+CHE**
957 -{{/info}}
843 +AT Command: AT+CHE
958 958  
959 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
960 -|=(% colspan="3" style="width: 707px;" %)AT+CHE
961 -|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
962 -|(% style="width:160px" %)AT+CHE=?|(% style="width:198px" %)Get eight channels mode|(% style="width:349px" %)1(((
845 +|=(% colspan="3" %)AT+CHE
846 +|**Command Example**|**Function**|**Response**
847 +|AT+CHE=?|Get eight channels mode|1(((
963 963  902.3 902.5 902.7 902.9 903.1 903.3 903.5 903.7
964 964  
965 965  OK
966 966  )))
967 -|(% style="width:160px" %)AT+CHE=1|(% style="width:198px" %)Set eight channels mode|(% style="width:349px" %)OK
852 +|AT+CHE=1|Set eight channels mode|OK
968 968  
969 -{{info}}
970 -**Downlink Command: 0x24**
971 -{{/info}}
854 +Downlink Command: 0x24
972 972  
973 973  Format: Command Code (0x24) followed by 1 bytes channel value.
974 974  
975 975  If the downlink payload=2401, it means set channel mode to 1, while type code is 24.
976 976  
977 -* **Example 1**: Downlink Payload: 2401 ~/~/ set channel mode to 1
978 -* **Example 2**: Downlink Payload: 2405 ~/~/ set channel mode to 5
860 +* Example 1: Downlink Payload: 2401 ~/~/ set channel mode to 1
861 +* Example 2: Downlink Payload: 2405 ~/~/ set channel mode to 5
979 979  
980 980  == 7.20 Get or Set RXwindows1 timeout ==
981 981  
982 982  Feature:Get or Set the number of symbols to detect and timeout from RXwindow1(0 to 255).
983 983  
984 -{{info}}
985 -**AT Command: AT+RX1WTO**
986 -{{/info}}
867 +AT Command: AT+RX1WTO
987 987  
988 -(% border="1" style="background-color:#ffffcc; color:green; width:460.222px" %)
989 -|=(% colspan="3" style="width: 457px;" %)AT+ RX1WTO
990 -|(% style="width:163px" %)**Command Example**|(% style="width:201px" %)**Function**|(% style="width:93px" %)**Response**
991 -|(% style="width:163px" %)AT+RX1WTO=?|(% style="width:201px" %)Get RXwindows1 timeout|(% style="width:93px" %)14(((
869 +|=(% colspan="3" %)AT+ RX1WTO
870 +|**Command Example**|**Function**|**Response**
871 +|AT+RX1WTO=?|Get RXwindows1 timeout|14(((
992 992  OK
993 993  )))
994 -|(% style="width:163px" %)AT+RX1WTO=60|(% style="width:201px" %)Set RXwindows1 timeout|(% style="width:93px" %)OK
874 +|AT+RX1WTO=60|Set RXwindows1 timeout|OK
995 995  
996 -(((
997 -**AT+RX1TWO** is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
998 -)))
876 +AT+RX1TWO is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
999 999  
1000 -[[image:image-20220526162535-1.png]]
878 +[[~[~[image:https://wiki.dragino.com/images/thumb/5/51/RX1WTO.JPG/600px-RX1WTO.JPG~|~|alt="RX1WTO.JPG" height="239" width="600"~]~]>>url:https://wiki.dragino.com/index.php/File:RX1WTO.JPG]]
1001 1001  
1002 -(((
1003 1003  Increasing thisvalue is equal to extending the time that the receiving window is opened, butthe corresponding power consumption will also increase. Properly increasingthis value can increase the success rate of the downlink.
1004 1004  
1005 -
1006 -)))
1007 -
1008 1008  == 7.21 Get or Set RXwindows2 timeout ==
1009 1009  
1010 1010  Feature:Get or Set the number of symbols to detect and timeout from RXwindow2(0 to 255).
1011 1011  
1012 -{{info}}
1013 -**AT Command: AT+RX2WTO**
1014 -{{/info}}
886 +AT Command: AT+RX2WTO
1015 1015  
1016 -(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
1017 -|=(% colspan="3" style="width: 494px;" %)AT+ RX2WTO
1018 -|(% style="width:190px" %)**Command Example**|(% style="width:199px" %)**Function**|(% style="width:104px" %)**Response**
1019 -|(% style="width:190px" %)AT+RX2WTO=?|(% style="width:199px" %)Get RXwindows2 timeout|(% style="width:104px" %)7(((
888 +|=(% colspan="3" %)AT+ RX2WTO
889 +|**Command Example**|**Function**|**Response**
890 +|AT+RX2WTO=?|Get RXwindows2 timeout|7(((
1020 1020  OK
1021 1021  )))
1022 -|(% style="width:190px" %)AT+RX2WTO=20|(% style="width:199px" %)Set RXwindows2 timeout|(% style="width:104px" %)OK
893 +|AT+RX2WTO=20|Set RXwindows2 timeout|OK
1023 1023  
1024 1024  == 7.22 Setting up uplinkdwelltime (as923, au915) ==
1025 1025  
1026 1026  Feature: Get or Set uplinkdwelltime
1027 1027  
1028 -{{info}}
1029 -**AT Command: AT+DWELLT**
1030 -{{/info}}
899 +AT Command: AT+DWELLT
1031 1031  
1032 -(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
1033 -|=(% colspan="3" style="width: 494px;" %)AT+DWELLT
1034 -|(% style="width:183px" %)**Command Example**|(% style="width:179px" %)**Function**|(% style="width:131px" %)**Response**
1035 -|(% style="width:183px" %)AT+DWELLT=?|(% style="width:179px" %)Get uplinkdwelltime|(% style="width:131px" %)1(((
901 +|=(% colspan="3" %)AT+DWELLT
902 +|**Command Example**|**Function**|**Response**
903 +|AT+DWELLT=?|Get uplinkdwelltime|1(((
1036 1036  OK
1037 1037  )))
1038 -|(% style="width:183px" %)AT+DWELLT=0|(% style="width:179px" %)Set uplinkdwelltime|(% style="width:131px" %)OK
906 +|AT+DWELLT=0|Set uplinkdwelltime|OK
1039 1039  
1040 -{{info}}
1041 -**Downlink Command: 0x25**
1042 -{{/info}}
908 +Downlink Command: 0x25
1043 1043  
1044 1044  Format: Command Code (0x25) followed by 1 bytes state value.
1045 1045  
1046 1046  If the downlink payload=2501, it means set uplinkdwelltime to 1, while type code is 25.
1047 1047  
1048 -* **Example 1**: Downlink Payload: **2501** ~/~/ set uplinkdwelltime to 1
1049 -* **Example 2**: Downlink Payload: **2500** ~/~/ set uplinkdwelltime to 0
914 +* Example 1: Downlink Payload: 2501 ~/~/ set uplinkdwelltime to 1
915 +* Example 2: Downlink Payload: 2500 ~/~/ set uplinkdwelltime to 0
1050 1050  
1051 1051  == 7.23 Set Packet Receiving Response Level ==
1052 1052  
... ... @@ -1054,11 +1054,11 @@
1054 1054  
1055 1055  RPL value:
1056 1056  
1057 -* **AT+RPL=0:** Device won't immediately reply any downlink commands from platform.
1058 -* **AT+RPL=1:** Device will immediately reply message to Unconfirmed Data Down. Payload is 0x00.
1059 -* **AT+RPL=2:** Device will immediately reply message to Confirmed Data Down. Payload is 0x00 and requied response header for this command.
1060 -* **AT+RPL=3:** Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command.
1061 -* **AT+RPL=4: **Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands.
923 +* AT+RPL=0: Device won't immediately reply any downlink commands from platform.
924 +* AT+RPL=1: Device will immediately reply message to Unconfirmed Data Down. Payload is 0x00.
925 +* AT+RPL=2: Device will immediately reply message to Confirmed Data Down. Payload is 0x00 and requied response header for this command.
926 +* AT+RPL=3: Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command.
927 +* AT+RPL=4: Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands.
1062 1062  
1063 1063  Case Analyes:
1064 1064  
... ... @@ -1066,44 +1066,37 @@
1066 1066  * For Class C devices used in ChirpStack, need to set AT+RPL=4 because Chirpstack require immedietely reply message to MAC Command.
1067 1067  * For Class C devices used in TTI, need to set AT+RPL=4 because TTI require immediately reply message to Confirmed Data Down & MAC Command.
1068 1068  
1069 -{{info}}
1070 -**AT Command: AT+RPL**
1071 -{{/info}}
935 +AT Command: AT+RPL
1072 1072  
1073 -(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1074 -|=(% colspan="3" style="width: 533px;" %)AT+RPL
1075 -|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1076 -|(% style="width:160px" %)AT+RPL=?|(% style="width:263px" %)Get packet receiving response level|(% style="width:109px" %)1(((
937 +|=(% colspan="3" %)AT+RPL
938 +|**Command Example**|**Function**|**Response**
939 +|AT+RPL=?|Get packet receiving response level|1(((
1077 1077  OK
1078 1078  )))
1079 -|(% style="width:160px" %)AT+RPL=0|(% style="width:263px" %)Set packet receiving response level|(% style="width:109px" %)OK
942 +|AT+RPL=0|Set packet receiving response level|OK
1080 1080  
1081 -{{info}}
1082 -**Downlink Command: 0x21**
1083 -{{/info}}
944 +Downlink Command: 0x21
1084 1084  
1085 1085  Format: Command Code (0x21) followed by 1 bytes level value.
1086 1086  
1087 1087  If the downlink payload=2101, it means set packet receiving response level to 1, while type code is 21.
1088 1088  
1089 -* **Example 1**: Downlink Payload: **2101** ~/~/ set packet receiving response level to 1
1090 -* **Example 2**: Downlink Payload: **2102** ~/~/ set packet receiving response level to 2
950 +* Example 1: Downlink Payload: 2101 ~/~/ set packet receiving response level to 1
951 +* Example 2: Downlink Payload: 2102 ~/~/ set packet receiving response level to 2
1091 1091  
1092 1092  = 8. AT Commands Combination =
1093 1093  
1094 1094  == 8.1 Set a fix RX2DR for downlink window ==
1095 1095  
1096 -* **AT+ADR=0 **~-~-> Disable ADR first
1097 -* **AT+RX2DR=xxxx** ~-~-> Set xxxx to your wanted DataRate
957 +* AT+ADR=0 ~-~-> Disable ADR first
958 +* AT+RX2DR=xxxx ~-~-> Set xxxx to your wanted DataRate
1098 1098  
1099 1099  == 8.2 Use Downlink Command to set a fix uplink DR ==
1100 1100  
1101 -{{info}}
1102 -**Downlink Command: 0x22000500**
1103 -{{/info}}
962 +Downlink Command: 0x22000500
1104 1104  
1105 1105  Same as:
1106 1106  
1107 -* AT+ADR=0  [[Reference>>||anchor="H7.1AdaptiveDataRate"]]
1108 -* AT+DR=5  [[Reference>>||anchor="H7.4DataRate"]]
1109 -* AT+TXP=0  [[Reference>>||anchor="H7.14TransmitPower"]]
966 +* AT+ADR=0 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Adaptive_Data_Rate]]
967 +* AT+DR=5 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Data_Rate]]
968 +* AT+TXP=0 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Transmit_Power]]
image-20220511120050-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -136.3 KB
Content
image-20220526162535-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -149.4 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0