Last modified by kai on 2024/09/06 10:00
<
From version < 35.1 >
edited by Xiaoling
on 2022/05/27 18:06
To version < 50.6 >
edited by Xiaoling
on 2022/07/13 12:01
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,4 +1,4 @@
1 - **Contents：**
1 + **Table of** **Contents：**
2 2  
3 3  {{toc/}}
4 4  
... ... @@ -6,6 +6,7 @@
6 6  
7 7  = 1. Introduction =
8 8  
9 +
9 9  Dragino LoRaWAN End Node support two types of AT Commands and Downlink Commands:
10 10  
11 11  * **Common Commands:** They should be available for each sensor, such as: change uplink interval, reset device.
... ... @@ -18,14 +18,18 @@
18 18  
19 19  = 2. How to use AT Commands or Downlink command =
20 20  
22 +
21 21  * For AT Command , See Devices User Manual for Device. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
22 22  * For LoRaWAN Downlink: The gateway transfer downlink command in HEX format. This page shows the HEX format downlink code for each command. but some servers use base64 as downlink code. Below are reference for how to use downlink command:
23 -** Use HEX format to send a downlink: [[TTN v3>>doc:Main.Notes for TTN.WebHome]]
24 -** Use Base64 format to send a downlink: [[Chirpstack>>doc:Main.Notes for ChirpStack.WebHome]].
25 +** Use HEX format to send a downlink: [[TTN v3>>Notes for TTN]]
26 +** Use Base64 format to send a downlink: [[Chirpstack>>Notes for ChirpStack]]
25 25  ** See use note for more serves [[Servers Note>>doc:Main.WebHome]](IoT LoRaWAN Server)
26 26  
29 +
30 +
27 27  = 3. Support End Node and firmware version =
28 28  
33 +
29 29  (% border="1" style="background-color:#ffffcc; color:green; width:966px" %)
30 30  |=(% colspan="3" style="width: 963px;" %)(((
31 31  Dragino STM32 base hardware Firmware / LoRaWAN stack list
... ... @@ -97,16 +97,17 @@
97 97  )))
98 98  )))
99 99  
105 +
106 +
100 100  = 4. System Management Commands =
101 101  
109 +
102 102  == 4.1 Change Uplink Interval ==
103 103  
112 +
104 104  Feature: Change LoRaWAN End Node Transmit Interval.
105 105  
106 -(% class="box infomessage" %)
107 -(((
108 -**AT Command: AT+TDC**
109 -)))
115 +(% style="color:blue" %)**AT Command: AT+TDC**
110 110  
111 111  (% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
112 112  |=(% colspan="3" style="width: 724px;" %)AT+TDC
... ... @@ -120,11 +120,11 @@
120 120  Set transmit interval to 60000ms = 60 seconds
121 121  )))
122 122  
123 -{{info}}
124 -**Downlink Command: 0x01**
125 -{{/info}}
126 -
127 127  (((
130 +
131 +
132 +(% style="color:blue" %)**Downlink Command: 0x01**
133 +
128 128  Format: Command Code (0x01) followed by 3 bytes time value.
129 129  )))
130 130  
... ... @@ -135,14 +135,17 @@
135 135  * **Example 1**: Downlink Payload:** 0100001E** ~/~/ Set Transmit Interval (TDC) = 30 seconds
136 136  * **Example 2**: Downlink Payload:** 0100003C** ~/~/ Set Transmit Interval (TDC) = 60 seconds
137 137  
144 +
145 +
138 138  == 4.2 Reboot End Node ==
139 139  
148 +
140 140  Feature: Reboot End Node to perform a new OTAA or ABP Join.
141 141  
142 -{{info}}
143 -**AT Command: ATZ**
144 -{{/info}}
145 145  
152 +(% style="color:blue" %)**AT Command: ATZ**
153 +
154 +
146 146  (% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
147 147  |=(% colspan="3" %)ATZ: Trig a reset of the MCU
148 148  |**Command Example**|**Function**|**Response**
... ... @@ -160,10 +160,10 @@
160 160  <followed by the Tx and Rx information>
161 161  )))
162 162  
163 -{{info}}
164 -**Downlink Command: 0x04**
165 -{{/info}}
166 166  
173 +(% style="color:blue" %)**Downlink Command: 0x04**
174 +
175 +
167 167  (((
168 168  Format: Command Code (0x04) followed by FF.
169 169  )))
... ... @@ -176,11 +176,10 @@
176 176  
177 177  == 4.3 Reset to factory Default ==
178 178  
188 +
179 179  Feature: Reset the parameters to Factory Default, factory default value depends on the firmware settings, the OTAA and ABP keys will reserve after this command.
180 180  
181 -{{info}}
182 -**AT Command: AT+FDR**
183 -{{/info}}
191 +(% style="color:blue" %)**AT Command: AT+FDR**
184 184  
185 185  (% border="1" style="background-color:#ffffcc; color:green; width:831.222px" %)
186 186  |=(% colspan="3" style="width: 828px;" %)Reset to factory default
... ... @@ -199,10 +199,10 @@
199 199  Please set the parameters or reset Device to apply change
200 200  )))
201 201  
202 -{{info}}
203 -**Downlink Command: 0x04**
204 -{{/info}}
205 205  
211 +(% style="color:blue" %)**Downlink Command: 0x04**
212 +
213 +
206 206  (((
207 207  Format: Command Code (0x04) followed by FE.
208 208  )))
... ... @@ -216,10 +216,10 @@
216 216  
217 217  Feature: Show firmware version. No downlink command yet.
218 218  
219 -{{info}}
220 -**AT Command: AT+VER**
221 -{{/info}}
222 222  
228 +(% style="color:blue" %)**AT Command: AT+VER**
229 +
230 +
223 223  (% border="1" style="background-color:#ffffcc; color:green; width:586px" %)
224 224  |=(% colspan="3" style="width: 583px;" %)AT+VER: Image Version and Frequency Band
225 225  |(% style="width:170px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:113px" %)**Response**
... ... @@ -229,10 +229,10 @@
229 229  OK
230 230  )))
231 231  
232 -{{info}}
233 -**Downlink Command: 0x26 (Valid in 006 stack)**
234 -{{/info}}
235 235  
241 +(% style="color:blue" %)**Downlink Command: 0x26 (Valid in 006 stack)**
242 +
243 +
236 236  (((
237 237  Downlink Format: 0x26
238 238  )))
... ... @@ -275,10 +275,10 @@
275 275  
276 276  Feature: Show All configure. No downlink command yet.
277 277  
278 -{{info}}
279 -**AT Command: AT+CFG**
280 -{{/info}}
281 281  
287 +(% style="color:blue" %)**AT Command: AT+CFG**
288 +
289 +
282 282  (% border="1" style="background-color:#ffffcc; color:green; width:599.222px" %)
283 283  |=(% colspan="3" style="width: 596px;" %)AT+CFG: Print all configurations
284 284  |(% style="width:160px" %)**Command Example**|(% style="width:154px" %)**Function**|(% style="width:280px" %)**Response**
... ... @@ -302,10 +302,10 @@
302 302  
303 303  Feature: Get or Set the Application EUI.
304 304  
305 -{{info}}
306 -**AT Command: AT+APPEUI**
307 -{{/info}}
308 308  
314 +(% style="color:blue" %)**AT Command: AT+APPEUI**
315 +
316 +
309 309  (% border="1" style="background-color:#ffffcc; color:green; width:686.222px" %)
310 310  |=(% colspan="3" style="width: 683px;" %)AT+APPEUI
311 311  |(% style="width:305px" %)**Command Example**|(% style="width:186px" %)**Function**|(% style="width:191px" %)**Response**
... ... @@ -318,10 +318,10 @@
318 318  
319 319  Feature: Get or Set the Application Key.
320 320  
321 -{{info}}
322 -**AT Command: AT+APPKEY**
323 -{{/info}}
324 324  
330 +(% style="color:blue" %)**AT Command: AT+APPKEY**
331 +
332 +
325 325  (% border="1" style="background-color:#ffffcc; color:green; width:976.222px" %)
326 326  |=(% colspan="3" style="width: 973px;" %)AT+APPKEY
327 327  |(% style="width:441px" %)**Command Example**|(% style="width:180px" %)**Function**|(% style="width:350px" %)**Response**
... ... @@ -334,10 +334,10 @@
334 334  
335 335  Feature: Get or Set the Application Session Key.
336 336  
337 -{{info}}
338 -**AT Command: AT+APPSKEY**
339 -{{/info}}
340 340  
346 +(% style="color:blue" %)**AT Command: AT+APPSKEY**
347 +
348 +
341 341  (% border="1" style="background-color:#ffffcc; color:green; width:1040.22px" %)
342 342  |=(% colspan="3" style="width: 1037px;" %)AT+APPSKEY
343 343  |(% style="width:451px" %)**Command Example**|(% style="width:231px" %)**Function**|(% style="width:354px" %)**Response**
... ... @@ -352,10 +352,10 @@
352 352  
353 353  Feature: Get or Set the Device Address.
354 354  
355 -{{info}}
356 -**AT Command: AT+DADDR**
357 -{{/info}}
358 358  
364 +(% style="color:blue" %)**AT Command: AT+DADDR**
365 +
366 +
359 359  (% border="1" style="background-color:#ffffcc; color:green; width:795.222px" %)
360 360  |=(% colspan="3" style="width: 792px;" %)AT+DADDR
361 361  |(% style="width:192px" %)**Command Example**|(% style="width:241px" %)**Function**|(% style="width:359px" %)**Response**
... ... @@ -366,15 +366,14 @@
366 366  )))
367 367  |(% style="width:192px" %)AT+DADDR=A8 40 41 FF|(% style="width:241px" %)Set the Application Session Key.|(% style="width:359px" %)OK
368 368  
369 -
370 370  == 5.5 Device EUI ==
371 371  
372 372  Feature: Get or Set the Device EUI.
373 373  
374 -{{info}}
375 -**AT Command: AT+DEUI**
376 -{{/info}}
377 377  
382 +(% style="color:blue" %)**AT Command: AT+DEUI**
383 +
384 +
378 378  (% border="1" style="background-color:#ffffcc; color:green; width:1035.22px" %)
379 379  |=(% colspan="3" style="width: 1032px;" %)AT+DEUI
380 380  |(% style="width:250px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:634px" %)**Response**
... ... @@ -385,15 +385,14 @@
385 385  OK
386 386  )))
387 387  
388 -
389 389  == 5.6 Network ID ==
390 390  
391 391  Feature: Get or Set the Network ID.(You can enter this command change only after successful network connection)
392 392  
393 -{{info}}
394 -**AT Command: AT+NWKID**
395 -{{/info}}
396 396  
400 +(% style="color:blue" %)**AT Command: AT+NWKID**
401 +
402 +
397 397  (% border="1" style="background-color:#ffffcc; color:green; width:448.222px" %)
398 398  |=(% colspan="3" style="width: 445px;" %)AT+NWKID
399 399  |(% style="width:191px" %)**Command Example**|(% style="width:153px" %)**Function**|(% style="width:101px" %)**Response**
... ... @@ -402,16 +402,14 @@
402 402  )))
403 403  |(% style="width:191px" %)AT+NWKID=A8 40 41 FF|(% style="width:153px" %)Set the Network ID.|(% style="width:101px" %)OK
404 404  
405 -
406 -
407 407  == 5.7 Network Session Key ==
408 408  
409 409  Feature: Get or Set the Network Session Key
410 410  
411 -{{info}}
412 -**AT Command: AT+NWKSKEY**
413 -{{/info}}
414 414  
416 +(% style="color:blue" %)**AT Command: AT+NWKSKEY**
417 +
418 +
415 415  (% border="1" style="background-color:#ffffcc; color:green; width:1017.22px" %)
416 416  |=(% colspan="3" style="width: 1014px;" %)AT+NWKSKEY
417 417  |(% style="width:455px" %)**Command Example**|(% style="width:215px" %)**Function**|(% style="width:343px" %)**Response**
... ... @@ -420,18 +420,18 @@
420 420  )))
421 421  |(% style="width:455px" %)AT+NWKSKEY=A8 40 41 FF FF 12 34 56 00 01 02 04 05 06 06 07|(% style="width:215px" %)Set the Network Session Key.|(% style="width:343px" %)OK
422 422  
423 -
424 -
425 425  = 6. Joining and sending date on LoRaWAN network =
426 426  
427 427  == 6.1 Confirm Mode ==
428 428  
431 +=== AT+CFM command before DR-LWS007 software stack ===
432 +
429 429  Feature: Get or Set the confirmation mode (0-1).
430 430  
431 -{{info}}
432 -**AT Command: AT+CFM**
433 -{{/info}}
434 434  
436 +(% style="color:blue" %)**AT Command: AT+CFM**
437 +
438 +
435 435  (% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
436 436  |=(% colspan="3" style="width: 707px;" %)AT+CFM
437 437  |(% style="width:155px" %)**Command Example**|(% style="width:205px" %)**Function**|(% style="width:346px" %)**Response**
... ... @@ -441,7 +441,7 @@
441 441  |(% style="width:155px" %)AT+CFM=1|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)OK
442 442  |(% style="width:155px" %)AT+CFM=2|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)While Error in format, return AT_PARAM_ERROR
443 443  
444 -Downlink Command: 0x05
448 +(% style="color:blue" %)**Downlink Command: 0x05**
445 445  
446 446  Format: Command Code (0x05) followed by 2 bytes mode value.
447 447  
... ... @@ -450,16 +450,62 @@
450 450  * Example 1: Downlink Payload: 0501 ~/~/ Set AT+CFM=1
451 451  * Example 2: Downlink Payload: 0500 ~/~/ Set AT+CFM=0
452 452  
457 +=== AT+CFM command since DR-LWS007 software stack ===
453 453  
454 454  
460 +(% style="color:blue" %)**AT Command: AT+CFM**
461 +
462 +
463 +(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
464 +|=(% colspan="3" style="width: 707px;" %)AT+CFM
465 +|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
466 +|(% style="width:160px" %)(((
467 +AT+CFM=1,0,0
468 +
469 +value1
470 +)))|(% style="width:198px" %)confirmed uplink|(% style="width:349px" %)(((
471 +1
472 +
473 +OK
474 +)))
475 +|(% style="width:160px" %)(((
476 +AT+CFM=0,?,0
477 +
478 +value2
479 +)))|(% style="width:198px" %)set max retry , range: 0 ~~ 7|(% style="width:349px" %)(((
480 +0~~7
481 +
482 +OK
483 +)))
484 +|(% style="width:160px" %)(((
485 +AT+CFM=0,0,1
486 +
487 +value3
488 +)))|(% style="width:198px" %)uplink fcnt increase by 1 for each retry|(% style="width:349px" %)(((
489 +1
490 +
491 +OK
492 +)))
493 +
494 +
495 +(% style="color:blue" %)**Downlink Command: 0x05**
496 +
497 +
498 +Format: Command Code (0x05) followed by 2 bytes mode value.
499 +
500 +If the downlink payload=05010101, it means set end node to use confirm mode, while type code is 05.
501 +
502 +* Example 1: Downlink Payload: 05010101 ~/~/ Set AT+CFM=1,1,1
503 +* Example 2: Downlink Payload: 05000700 ~/~/ Set AT+CFM=0,7,0
504 +
455 455  == 6.2 Confirm Status ==
456 456  
457 457  Feature: Get confirmation status of the last AT+SEND (0-1).
458 458  
459 -{{info}}
460 -**AT Command: AT+CFS**
461 -{{/info}}
462 462  
510 +(% style="color:blue" %)**AT Command: AT+CFS**
511 +
512 +
463 463  (% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
464 464  |=(% colspan="3" style="width: 531px;" %)AT+CFS
465 465  |(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:178px" %)**Response**
... ... @@ -467,16 +467,14 @@
467 467  OK
468 468  )))
469 469  
470 -
471 -
472 472  == 6.3 Join LoRa® Network ==
473 473  
474 474  Feature: Join network.
475 475  
476 -{{info}}
477 -**AT Command: AT+JOIN**
478 -{{/info}}
479 479  
525 +(% style="color:blue" %)**AT Command: AT+JOIN**
526 +
527 +
480 480  (% border="1" style="background-color:#ffffcc; color:green; width:647.222px" %)
481 481  |=(% colspan="3" style="width: 644px;" %)AT+JOIN
482 482  |(% style="width:163px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:334px" %)**Response**
... ... @@ -486,16 +486,14 @@
486 486  While Error in format, return AT_BUSY_ERROR
487 487  )))
488 488  
489 -
490 -
491 491  == 6.4 LoRa® Network Join Mode ==
492 492  
493 493  Feature: Get or Set the Network Join Mode. (0: ABP, 1: OTAA).
494 494  
495 -{{info}}
496 -**AT Command: AT+NJM**
497 -{{/info}}
498 498  
542 +(% style="color:blue" %)**AT Command: AT+NJM**
543 +
544 +
499 499  (% border="1" style="background-color:#ffffcc; color:green; width:753.222px" %)
500 500  |=(% colspan="3" style="width: 750px;" %)AT+NJM
501 501  |(% style="width:162px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:361px" %)**Response**
... ... @@ -505,27 +505,25 @@
505 505  |(% style="width:162px" %)AT+NJM=0|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)OK
506 506  |(% style="width:162px" %)AT+NJM=2|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)While Error in format, return AT_PARAM_ERROR
507 507  
508 -{{info}}
509 -**Downlink Command: 0x20**
510 -{{/info}}
511 511  
555 +(% style="color:blue" %)**Downlink Command: 0x20**
556 +
557 +
512 512  Format: Command Code (0x20) followed by 1 bytes mode value.
513 513  
514 514  If the downlink payload=2000, it means set the Network Join Mode, while type code is 20.
515 515  
516 -* **Example 1: **Downlink Payload: **2000** ~/~/ Set AT+NJM=O
562 +* **Example 1: **Downlink Payload: **2000** ~/~/ Set AT+NJM=0
517 517  * **Example 2:** Downlink Payload: **2001** ~/~/ Set AT+NJM=1
518 518  
519 -
520 -
521 521  == 6.5 LoRa® Network Join Status ==
522 522  
523 523  Feature: LoRa® Network Join Status.
524 524  
525 -{{info}}
526 -**AT Command: AT+NJS**
527 -{{/info}}
528 528  
570 +(% style="color:blue" %)**AT Command: AT+NJS**
571 +
572 +
529 529  (% border="1" style="background-color:#ffffcc; color:green; width:498.222px" %)
530 530  |=(% colspan="3" style="width: 495px;" %)AT+NJS
531 531  |(% style="width:169px" %)**Command Example**|(% style="width:164px" %)**Function**|(% style="width:161px" %)**Response**
... ... @@ -537,10 +537,10 @@
537 537  
538 538  Feature: Print Last Received Data in Raw Format<port:data>.
539 539  
540 -{{info}}
541 -**AT Command: AT+RECV**
542 -{{/info}}
543 543  
585 +(% style="color:blue" %)**AT Command: AT+RECV**
586 +
587 +
544 544  (% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
545 545  |=(% colspan="3" style="width: 584px;" %)AT+RECV
546 546  |(% style="width:161px" %)**Command Example**|(% style="width:272px" %)**Function**|(% style="width:150px" %)**Response**
... ... @@ -552,10 +552,10 @@
552 552  
553 553  Feature: Print Last Received Data in Binary Format<port:data>.
554 554  
555 -{{info}}
556 -**AT Command: AT+RECVB**
557 -{{/info}}
558 558  
600 +(% style="color:blue" %)**AT Command: AT+RECVB**
601 +
602 +
559 559  (% border="1" style="background-color:#ffffcc; color:green; width:793.222px" %)
560 560  |=(% colspan="3" style="width: 790px;" %)AT+RECVB
561 561  |(% style="width:173px" %)**Command Example**|(% style="width:497px" %)**Function**|(% style="width:120px" %)**Response**
... ... @@ -567,10 +567,10 @@
567 567  
568 568  Feature: Send Text Data<port:data>.
569 569  
570 -{{info}}
571 -**AT Command: AT+SEND**
572 -{{/info}}
573 573  
615 +(% style="color:blue" %)**AT Command: AT+SEND**
616 +
617 +
574 574  (% border="1" style="background-color:#ffffcc; color:green; width:991.222px" %)
575 575  |=(% colspan="3" style="width: 988px;" %)AT+SEND
576 576  |(% style="width:201px" %)**Command Example**|(% style="width:340px" %)**Function**|(% style="width:446px" %)**Response**
... ... @@ -586,10 +586,10 @@
586 586  
587 587  Feature: Send hexadecimal data along with the application port.
588 588  
589 -{{info}}
590 -**AT Command: AT+SENDB**
591 -{{/info}}
592 592  
634 +(% style="color:blue" %)**AT Command: AT+SENDB**
635 +
636 +
593 593  (% border="1" style="background-color:#ffffcc; color:green; width:1120.22px" %)
594 594  |=(% colspan="3" style="width: 1117px;" %)AT+SENDB
595 595  |(% style="width:257px" %)**Command Example**|(% style="width:406px" %)**Function**|(% style="width:453px" %)**Response**
... ... @@ -606,10 +606,10 @@
606 606  
607 607  Feature: Get or Set the Adaptive Data Rate setting. (0: off, 1: on).
608 608  
609 -{{info}}
610 -**AT Command: AT+ADR**
611 -{{/info}}
612 612  
654 +(% style="color:blue" %)**AT Command: AT+ADR**
655 +
656 +
613 613  (% border="1" style="background-color:#ffffcc; color:green; width:683.222px" %)
614 614  |=(% colspan="3" style="width: 680px;" %)AT+ADR
615 615  |(% style="width:162px" %)**Command Example**|(% style="width:266px" %)**Function**|(% style="width:250px" %)**Response**
... ... @@ -621,11 +621,11 @@
621 621  AT_PARAM_ERROR
622 622  )))
623 623  
624 -{{info}}
625 -**Downlink Command: 0x22**
626 -{{/info}}
627 627  
669 +(% style="color:blue" %)**Downlink Command: 0x22**
628 628  
671 +
672 +
629 629  If the downlink payload=2201, it means setting the adaptive data rate to 1, while type code is 22.
630 630  
631 631  * **Example 1**: Downlink Payload: **2201** ~/~/ Set AT+ADR=1.
... ... @@ -635,10 +635,10 @@
635 635  
636 636  Feature: Get or Set the Device Class(Currently only support class A, class C).
637 637  
638 -{{info}}
639 -**AT Command:AT+CLASS**
640 -{{/info}}
641 641  
683 +(% style="color:blue" %)**AT Command:AT+CLASS**
684 +
685 +
642 642  (% border="1" style="background-color:#ffffcc; color:green; width:507.222px" %)
643 643  |=(% colspan="3" style="width: 504px;" %)AT+CLASS
644 644  |(% style="width:163px" %)**Command Example**|(% style="width:166px" %)**Function**|(% style="width:175px" %)**Response**
... ... @@ -653,10 +653,10 @@
653 653  
654 654  Feature: Get or Set the ETSI Duty Cycle setting - 0=disable, 1=enable - Only for testing.
655 655  
656 -{{info}}
657 -**AT Command:AT+DCS**
658 -{{/info}}
659 659  
701 +(% style="color:blue" %)**AT Command:AT+DCS**
702 +
703 +
660 660  (% border="1" style="background-color:#ffffcc; color:green; width:515.222px" %)
661 661  |=(% colspan="3" style="width: 512px;" %)AT+DCS
662 662  |(% style="width:165px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:107px" %)**Response**
... ... @@ -671,10 +671,10 @@
671 671  
672 672  Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) . Note: while set Data Rate, please use set Adptive Data Rate, ADR=0 first. otherwise device will response to server's ADR command and change the DR to the setting from server
673 673  
674 -{{info}}
675 -**AT Command: AT+DR**
676 -{{/info}}
677 677  
719 +(% style="color:blue" %)**AT Command: AT+DR**
720 +
721 +
678 678  (% border="1" style="background-color:#ffffcc; color:green; width:466.222px" %)
679 679  |=(% colspan="3" style="width: 463px;" %)AT+DR
680 680  |(% style="width:156px" %)**Command Example**|(% style="width:167px" %)**Function**|(% style="width:140px" %)**Response**
... ... @@ -685,11 +685,11 @@
685 685  
686 686  )))
687 687  
688 -{{info}}
689 -**Downlink Command: 0x2200aaFF**
690 -{{/info}}
691 691  
733 +(% style="color:blue" %)**Downlink Command: 0x2200aaFF**
692 692  
735 +
736 +
693 693  If the downlink payload=220001FF, it means setting the data rate to 1, while type code is 22 00 aa FF.
694 694  
695 695  * **Example 1**: Downlink Payload: **220001FF** ~/~/ Set AT+DR=1.
... ... @@ -699,10 +699,10 @@
699 699  
700 700  Feature: Get or Set the Frame Counter Downlink.
701 701  
702 -{{info}}
703 -**AT Command:AT+FCD**
704 -{{/info}}
705 705  
747 +(% style="color:blue" %)**AT Command:AT+FCD**
748 +
749 +
706 706  (% border="1" style="background-color:#ffffcc; color:green; width:693.222px" %)
707 707  |=(% colspan="3" style="width: 690px;" %)AT+FCD
708 708  |(% style="width:162px" %)**Command Example**|(% style="width:258px" %)**Function**|(% style="width:269px" %)**Response**
... ... @@ -719,10 +719,10 @@
719 719  
720 720  Feature: Get or Set the Frame Counter Uplink.
721 721  
722 -{{info}}
723 -**AT Command:AT+FCU**
724 -{{/info}}
725 725  
767 +(% style="color:blue" %)**AT Command:AT+FCU**
768 +
769 +
726 726  (% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
727 727  |=(% colspan="3" style="width: 531px;" %)AT+FCU
728 728  |(% style="width:177px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:113px" %)**Response**
... ... @@ -737,10 +737,10 @@
737 737  
738 738  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 1 in ms.
739 739  
740 -{{info}}
741 -**AT Command:AT+JN1DL**
742 -{{/info}}
743 743  
785 +(% style="color:blue" %)**AT Command:AT+JN1DL**
786 +
787 +
744 744  (% border="1" style="background-color:#ffffcc; color:green; width:537.222px" %)
745 745  |=(% colspan="3" style="width: 534px;" %)AT+JN1DL
746 746  |(% style="width:164px" %)**Command Example**|(% style="width:229px" %)**Function**|(% style="width:140px" %)**Response**
... ... @@ -755,10 +755,10 @@
755 755  
756 756  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 2 in ms.
757 757  
758 -{{info}}
759 -**AT Command:AT+JN2DL**
760 -{{/info}}
761 761  
803 +(% style="color:blue" %)**AT Command:AT+JN2DL**
804 +
805 +
762 762  (% border="1" style="background-color:#ffffcc; color:green; width:538.222px" %)
763 763  |=(% colspan="3" style="width: 535px;" %)AT+JN2DL
764 764  |(% style="width:160px" %)**Command Example**|(% style="width:228px" %)**Function**|(% style="width:146px" %)**Response**
... ... @@ -771,12 +771,14 @@
771 771  
772 772  == 7.9 Public Network Mode ==
773 773  
774 -Feature: Get or Set the public network mode. (0: off, 1: on)
818 +Feature: Get or Set the public network mode. (0: off, 1: on). A Public LoRaWAN network use 0x34 as syncword. Default Settings; PNM=1
775 775  
776 -{{info}}
777 -**AT Command:AT+PNM**
778 -{{/info}}
820 +Notice: If user build their own LoRaWAN server but still use syncword=0x34, this is still considered a public LoRaWAN network
779 779  
822 +
823 +(% style="color:blue" %)**AT Command:AT+PNM**
824 +
825 +
780 780  (% border="1" style="background-color:#ffffcc; color:green; width:667.222px" %)
781 781  |=(% colspan="3" style="width: 664px;" %)AT+PNM
782 782  |(% style="width:166px" %)**Command Example**|(% style="width:225px" %)**Function**|(% style="width:272px" %)**Response**
... ... @@ -783,20 +783,25 @@
783 783  |(% style="width:166px" %)AT+PNM=?|(% style="width:225px" %)Get the public network mode.|(% style="width:272px" %)1(((
784 784  OK
785 785  )))
786 -|(% style="width:166px" %)AT+PNM=1|(% style="width:225px" %)Set the public network mode.|(% style="width:272px" %)(System will write new value to PNM)(((
832 +|(% style="width:166px" %)AT+PNM=1|(% style="width:225px" %)(((
833 +Set the public network mode.
834 +
835 +Set syncword=0x34
836 +)))|(% style="width:272px" %)(System will write new value to PNM)(((
787 787  OK
788 788  
789 789  
790 790  )))
841 +|(% style="width:166px" %)AT+PNM=0|(% style="width:225px" %)Set to use private network autoset syncword=0x12|(% style="width:272px" %)
791 791  
792 792  == 7.10 Receive Delay1 ==
793 793  
794 794  Feature: Get or Set the delay between the end of the Tx and the Rx Window 1 in ms
795 795  
796 -{{info}}
797 -**AT Command:AT+RX1DL**
798 -{{/info}}
799 799  
848 +(% style="color:blue" %)**AT Command:AT+RX1DL**
849 +
850 +
800 800  (% border="1" style="background-color:#ffffcc; color:green; width:408.222px" %)
801 801  |=(% colspan="3" style="width: 405px;" %)AT+RX1DL
802 802  |(% style="width:155px" %)**Command Example**|(% style="width:128px" %)**Function**|(% style="width:122px" %)**Response**
... ... @@ -811,10 +811,10 @@
811 811  
812 812  Feature: Get or Set the delay between the end of the Tx and the Rx Window 2 in ms
813 813  
814 -{{info}}
815 -**AT Command:AT+RX2DL**
816 -{{/info}}
817 817  
866 +(% style="color:blue" %)**AT Command:AT+RX2DL**
867 +
868 +
818 818  (% border="1" style="background-color:#ffffcc; color:green; width:481.222px" %)
819 819  |=(% colspan="3" style="width: 478px;" %)AT+RX2DL
820 820  |(% style="width:175px" %)**Command Example**|(% style="width:152px" %)**Function**|(% style="width:150px" %)**Response**
... ... @@ -829,10 +829,10 @@
829 829  
830 830  Feature: Get or Set the Rx2 window data rate (0-7 corresponding to DR_X)
831 831  
832 -{{info}}
833 -**AT Command:AT+RX2DR**
834 -{{/info}}
835 835  
884 +(% style="color:blue" %)**AT Command:AT+RX2DR**
885 +
886 +
836 836  (% border="1" style="background-color:#ffffcc; color:green; width:525.222px" %)
837 837  |=(% colspan="3" style="width: 522px;" %)AT+RX2DR
838 838  |(% style="width:160px" %)**Command Example**|(% style="width:232px" %)**Function**|(% style="width:130px" %)**Response**
... ... @@ -847,10 +847,10 @@
847 847  
848 848  Feature: Get or Set the Rx2 window frequency
849 849  
850 -{{info}}
851 -**AT Command:AT+RX2FQ**
852 -{{/info}}
853 853  
902 +(% style="color:blue" %)**AT Command:AT+RX2FQ**
903 +
904 +
854 854  (% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
855 855  |=(% colspan="3" style="width: 584px;" %)AT+RX2FQ
856 856  |(% style="width:183px" %)**Command Example**|(% style="width:240px" %)**Function**|(% style="width:160px" %)**Response**
... ... @@ -865,10 +865,10 @@
865 865  
866 866  Feature: Get or Set the Transmit Power(0-5, MAX:0, MIN:5, according to LoRaWAN Spec, or 40=10dB, 41 = 11dB, …, 50 = 20dB which is out of LoRaWAN spec. )
867 867  
868 -{{info}}
869 -**AT Command:AT+TXP**
870 -{{/info}}
871 871  
920 +(% style="color:blue" %)**AT Command:AT+TXP**
921 +
922 +
872 872  (% border="1" style="background-color:#ffffcc; color:green; width:465.222px" %)
873 873  |=(% colspan="3" style="width: 462px;" %)AT+TXP
874 874  |(% style="width:161px" %)**Command Example**|(% style="width:189px" %)**Function**|(% style="width:112px" %)**Response**
... ... @@ -890,10 +890,10 @@
890 890  
891 891  Feature: Get or Set the Rx2 window frequency
892 892  
893 -{{info}}
894 -**AT Command:AT+RSSI**
895 -{{/info}}
896 896  
945 +(% style="color:blue" %)**AT Command:AT+RSSI**
946 +
947 +
897 897  (% border="1" style="background-color:#ffffcc; color:green; width:557.222px" %)
898 898  |=(% colspan="3" style="width: 554px;" %)AT+RSSI
899 899  |(% style="width:164px" %)**Command Example**|(% style="width:289px" %)**Function**|(% style="width:100px" %)**Response**
... ... @@ -905,10 +905,10 @@
905 905  
906 906  Feature: Get the SNR of the last received packet
907 907  
908 -{{info}}
909 -**AT Command:AT+SNR**
910 -{{/info}}
911 911  
960 +(% style="color:blue" %)**AT Command:AT+SNR**
961 +
962 +
912 912  (% border="1" style="background-color:#ffffcc; color:green; width:571.222px" %)
913 913  |=(% colspan="3" style="width: 568px;" %)AT+SNR
914 914  |(% style="width:164px" %)**Command Example**|(% style="width:290px" %)**Function**|(% style="width:113px" %)**Response**
... ... @@ -920,10 +920,10 @@
920 920  
921 921  Feature: Get or set the application port.
922 922  
923 -{{info}}
924 -**AT Command: AT+PORT**
925 -{{/info}}
926 926  
975 +(% style="color:blue" %)**AT Command: AT+PORT**
976 +
977 +
927 927  (% border="1" style="background-color:#ffffcc; color:green; width:500.222px" %)
928 928  |=(% colspan="3" style="width: 497px;" %)AT+PORT
929 929  |(% style="width:157px" %)**Command Example**|(% style="width:204px" %)**Function**|(% style="width:135px" %)**Response**
... ... @@ -1100,6 +1100,129 @@
1100 1100  * **Example 1**: Downlink Payload: **2101** ~/~/ set packet receiving response level to 1
1101 1101  * **Example 2**: Downlink Payload: **2102** ~/~/ set packet receiving response level to 2
1102 1102  
1154 +== 7.24 Controls NBTrans in unconfirmed uplink mode（LWS007 NBTrans:Set retransmission packets) ==
1155 +
1156 +{{info}}
1157 +**AT Command: AT+SETMAXNBTRANS **
1158 +{{/info}}
1159 +
1160 +(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1161 +|=(% colspan="3" style="width: 533px;" %)AT+**SETMAXNBTRANS**
1162 +|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1163 +|(% style="width:160px" %)**AT+SETMAXNBTRANS=1，0**|(% style="width:263px" %)Value1: set the maximum NBTrans.|(% style="width:109px" %)1(((
1164 +OK
1165 +)))
1166 +|(% style="width:160px" %)**AT+SETMAXNBTRANS=？，1**|(% style="width:263px" %)value2: 0: uplink fcnt doesn't change for each NBTrans; 1: uplink fcnt increase by 1 for each NBTrans.|(% style="width:109px" %)(((
1167 +1
1168 +
1169 +OK
1170 +)))
1171 +
1172 +{{info}}
1173 +**Downlink Command: 0x33**
1174 +{{/info}}
1175 +
1176 +Format: Command Code (0x33) followed by 2 bytes mode value.
1177 +
1178 +If the downlink payload=330100, it means set end node to use confirm mode, while type code is 33.
1179 +
1180 +* Example 1: Downlink Payload: 330100 ~/~/ Set AT+SETMAXNBTRANS=1,0
1181 +* Example 2: Downlink Payload: 330201 ~/~/ Set AT+SETMAXNBTRANS=2,1
1182 +
1183 +== 7.25 Device offline rejoining （LWS007) ==
1184 +
1185 +{{info}}
1186 +**AT Command: AT+DDETECT**
1187 +{{/info}}
1188 +
1189 +(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
1190 +|=(% colspan="3" style="width: 707px;" %)AT+**DDETECT**
1191 +|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
1192 +|(% style="width:160px" %)(((
1193 +AT+DDETECT=1,1440,2880
1194 +
1195 +value1
1196 +)))|(% style="width:198px" %)Enable online detect|(% style="width:349px" %)(((
1197 +1
1198 +
1199 +OK
1200 +)))
1201 +|(% style="width:160px" %)(((
1202 +AT+DDETECT=1,?,2880
1203 +
1204 +value2
1205 +)))|(% style="width:198px" %)Online detection packet sending time|(% style="width:349px" %)(((
1206 +
1207 +
1208 +OK
1209 +)))
1210 +|(% style="width:160px" %)(((
1211 +AT+DDETECT=1,1440,？
1212 +
1213 +value3
1214 +)))|(% style="width:198px" %)Process rejoin|(% style="width:349px" %)(((
1215 +
1216 +
1217 +OK
1218 +)))
1219 +
1220 +{{info}}
1221 +**Downlink Command: 0x33**
1222 +{{/info}}
1223 +
1224 +Format: Command Code (0x32) followed by 2 bytes mode value.
1225 +
1226 +If the downlink payload=320105A00B40, it means set end node to use confirm mode, while type code is 33.
1227 +
1228 +* Example 1: Downlink Payload: 320105A00B40 ~/~/ Set AT+DDETECT=1,1440,2880
1229 +
1230 +== 7.26 Request the server to send an ACK ==
1231 +
1232 +{{info}}
1233 +**AT Command: AT+PNACKMD**
1234 +{{/info}}
1235 +
1236 +(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1237 +|=(% colspan="3" style="width: 533px;" %)**AT+PNACKMD**
1238 +|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1239 +|(% style="width:160px" %)**AT+PNACKMD=1**|(% style="width:263px" %)If the node uploads the ACK as confirm, it will request the server to send an ACK. If the server ack is not received, the node will upload the packets that have not received the ACK the next time it receives the ACK|(% style="width:109px" %)1(((
1240 +OK
1241 +)))
1242 +|(% style="width:160px" %)**AT+PNACKMD=0**|(% style="width:263px" %)off request the server to send an ACK|(% style="width:109px" %)(((
1243 +0
1244 +
1245 +OK
1246 +)))
1247 +
1248 +== 7.27 Adjust network rejoining interval ==
1249 +
1250 +{{info}}
1251 +**AT Command: AT+RJTDC**
1252 +{{/info}}
1253 +
1254 +(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
1255 +|=(% colspan="3" style="width: 724px;" %)AT+RJTDC
1256 +|(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
1257 +|(% style="width:165px" %)AT+RJTDC=?|(% style="width:227px" %)Show the ReJoin data transmission interval in min|(% style="width:329px" %)30000(((
1258 +OK
1259 +
1260 +the interval is 30000ms = 30s
1261 +)))
1262 +|(% style="width:165px" %)AT+RJTDC=60000|(% style="width:227px" %)Set the ReJoin data transmission interval in min|(% style="width:329px" %)OK(((
1263 +Set the ReJoin data transmission interval to 60000ms = 60 seconds
1264 +)))
1265 +
1266 +{{info}}
1267 +**Downlink Command: 0x26**
1268 +{{/info}}
1269 +
1270 +Format: Command Code (0x26) followed by 2 bytes mode value.
1271 +
1272 +If the downlink payload=26000A, it means set end node to use confirm mode, while type code is 26.
1273 +
1274 +* Example 1: Downlink Payload: 26000A ~/~/ Set AT+RJTDC=10
1275 +* Example 2: Downlink Payload: 260002 ~/~/ Set AT+RJTDC=2
1276 +
1103 1103  = 8. AT Commands Combination =
1104 1104  
1105 1105  == 8.1 Set a fix RX2DR for downlink window ==
... ... @@ -1118,3 +1118,4 @@
1118 1118  * AT+ADR=0  [[Reference>>||anchor="H7.1AdaptiveDataRate"]]
1119 1119  * AT+DR=5  [[Reference>>||anchor="H7.4DataRate"]]
1120 1120  * AT+TXP=0  [[Reference>>||anchor="H7.14TransmitPower"]]
1295 +~)~)~)

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0