Changes for page End Device AT Commands and Downlink Command
Last modified by kai on 2024/09/06 10:00
Summary
-
Page properties (1 modified, 0 added, 0 removed)
-
Attachments (0 modified, 0 added, 2 removed)
Details
- Page properties
-
- Content
-
... ... @@ -1,9 +1,8 @@ 1 - **Contents：**1 +Contens 2 2 3 3 {{toc/}} 4 4 5 5 6 - 7 7 = 1. Introduction = 8 8 9 9 Dragino LoRaWAN End Node support two types of AT Commands and Downlink Commands: ... ... @@ -11,91 +11,33 @@ 11 11 * **Common Commands:** They should be available for each sensor, such as: change uplink interval, reset device. 12 12 * **Sensor Related Commands:** Only for special sensor, such as control relay, poll RS485 device. 13 13 14 -((( 15 15 **This page shows the common commands since Dragino LoRaWAN stack DR-LWS-005. Make sure the end node support stack higher than DR-LWS-005 before checking this page.** 16 16 17 -))) 18 18 19 19 = 2. How to use AT Commands or Downlink command = 20 20 21 21 * For AT Command , See Devices User Manual for Device. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]] 22 22 * For LoRaWAN Downlink: The gateway transfer downlink command in HEX format. This page shows the HEX format downlink code for each command. but some servers use base64 as downlink code. Below are reference for how to use downlink command: 23 -** Use HEX format to send a downlink: [[TTN v3>>doc :Main.Notes.WebHome]]24 -** Use Base64 format to send a downlink: [[Chirpstack>>doc :Main.Notes.WebHome]].25 -** See use note for more serves [[Servers Note>>doc :Main.WebHome]](IoT LoRaWANServer)20 +** Use HEX format to send a downlink: [[TTN v3>>url:https://wiki.dragino.com/index.php/Notes_for_TTN#Send_Downlink_message]] 21 +** Use Base64 format to send a downlink: [[Chirpstack>>url:https://wiki.dragino.com/index.php/Notes_for_ChirpStack#Downlink]]. 22 +** See use note for more serves [[Servers Note>>url:https://wiki.dragino.com/index.php/Main_Page#Use_Note_for_Server]] 26 26 27 27 = 3. Support End Node and firmware version = 28 28 29 -(% border="1" style="background-color:#ffffcc; color:green; width:966px" %) 30 -|=(% colspan="3" style="width: 963px;" %)((( 31 -Dragino STM32 base hardware Firmware / LoRaWAN stack list 32 -))) 33 -|(% style="width:187px" %)((( 34 -**Model** 35 -)))|(% style="width:330px" %)((( 36 -**Description** 37 -)))|(% style="width:445px" %)((( 38 -**Firmware Version <~-~-> Stack Version** 39 -))) 40 -|(% style="width:187px" %)((( 41 -[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]], 42 -)))|(% style="width:330px" %)((( 43 -Open Source Generic LoRaWAN Sensor Node 44 -)))|(% style="width:445px" %)((( 45 -((( 46 -LSN50 v1.6.0 <~-~-> DR-LWS-003; 47 -))) 48 - 49 -((( 50 -((( 26 +(% border="1" style="background-color:#ffffcc; color:green; width:957.222px" %) 27 +|=(% colspan="3" style="width: 954px;Alignment:center" %) Dragino STM32 base hardware Firmware / LoRaWAN stack list 28 +|(% style="width:198px" %)**Model**|(% style="width:311px" %)**Description**|(% style="width:444px" %)**Firmware Version <~-~-> Stack Version** 29 +|(% style="width:198px" %)[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],|(% style="width:311px" %)Open Source Generic LoRaWAN Sensor Node|(% style="width:444px" %)LSN50 v1.6.0 <~-~-> DR-LWS-003;((( 51 51 LSN50 v1.7.0 <~-~-> DR-LWS-005; ~-~-> Support since this version 52 52 ))) 53 -))) 54 -))) 55 -|(% style="width:187px" %)((( 56 -[[LGT92>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/142-lgt-92.html]], 57 -)))|(% style="width:330px" %)((( 58 -LoRaWAN GPS Tracker 59 -)))|(% style="width:445px" %)((( 60 -((( 61 -LGT92 v1.6.3 <~-~-> DR-LWS-003; 62 -))) 63 - 64 -((( 65 -((( 32 +|(% style="width:198px" %)[[LGT92>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/142-lgt-92.html]],|(% style="width:311px" %)LoRaWAN GPS Tracker|(% style="width:444px" %)LGT92 v1.6.3 <~-~-> DR-LWS-003;((( 66 66 LGT92 v1.6.4 <~-~-> DR-LWS-005;~-~-> Support since this version 67 67 ))) 68 -))) 69 -))) 70 -|(% style="width:187px" %)((( 71 -[[LBT1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/165-lbt1.html]], 72 -)))|(% style="width:330px" %)((( 73 -LoRaWAN BLE Indoor Tracker 74 -)))|(% style="width:445px" %)((( 75 -LBT1 v1.0 <~-~-> DR-LWS-005; 76 -))) 77 -|(% style="width:187px" %)((( 78 -[[RS485-LN>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/154-rs485-ln.html]], 79 -)))|(% style="width:330px" %)((( 80 -LoRaWAN RS485 Modbus Converter 81 -)))|(% style="width:445px" %)((( 82 -RS485-LN v1.3 <~-~-> DR-LWS-005; 83 -))) 84 -|(% style="width:187px" %)((( 85 -[[LHT65>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/151-lht65.html]], 86 -)))|(% style="width:330px" %)((( 87 -LoRaWAN Temperature & Humidity Sensor 88 -)))|(% style="width:445px" %)((( 89 -((( 90 -LHT65 v1.7 <~-~-> DR-LWS-003; 91 -))) 92 - 93 -((( 94 -((( 35 +|(% style="width:198px" %)[[LBT1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/165-lbt1.html]],|(% style="width:311px" %)LoRaWAN BLE Indoor Tracker|(% style="width:444px" %)LBT1 v1.0 <~-~-> DR-LWS-005; 36 +|(% style="width:198px" %)[[RS485-LN>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/154-rs485-ln.html]],|(% style="width:311px" %)LoRaWAN RS485 Modbus Converter|(% style="width:444px" %)RS485-LN v1.3 <~-~-> DR-LWS-005; 37 +|(% style="width:198px" %)[[LHT65>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/151-lht65.html]],|(% style="width:311px" %)LoRaWAN Temperature & Humidity Sensor|(% style="width:444px" %)LHT65 v1.7 <~-~-> DR-LWS-003;((( 95 95 LHT65 v1.8.0 <~-~-> DR-LWS-005;~-~-> Support since this version 96 96 ))) 97 -))) 98 -))) 99 99 100 100 = 4. System Management Commands = 101 101 ... ... @@ -105,32 +105,26 @@ 105 105 106 106 (% class="box infomessage" %) 107 107 ((( 108 - **AT Command: AT+TDC**49 +AT Command: AT+TDC 109 109 ))) 110 110 111 111 (% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %) 112 -|=(% colspan="3" style="width: 724px;" %)AT+TDC 113 -|(% style="width:16 5px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**114 -|(% style="width:16 5px" %)AT+TDC=?|(% style="width:227px" %)Show current transmit Interval|(% style="width:329px" %)30000(((53 +|=(% colspan="3" style="width: 724px;Alignment" %) AT+TDC 54 +|(% style="width:168px" %)**Command Example**|(% style="width:223px" %)**Function**|(% style="width:333px" %)**Response** 55 +|(% style="width:168px" %)AT+TDC=?|(% style="width:223px" %)Show current transmit Interval|(% style="width:333px" %)30000((( 115 115 OK 116 116 117 117 the interval is 30000ms = 30s 118 118 ))) 119 -|(% style="width:16 5px" %)AT+TDC=60000|(% style="width:227px" %)Set Transmit Interval|(% style="width:329px" %)OK(((60 +|(% style="width:168px" %)AT+TDC=60000|(% style="width:223px" %)Set Transmit Interval|(% style="width:333px" %)OK((( 120 120 Set transmit interval to 60000ms = 60 seconds 121 121 ))) 122 122 123 -{{info}} 124 124 **Downlink Command: 0x01** 125 -{{/info}} 126 126 127 -((( 128 128 Format: Command Code (0x01) followed by 3 bytes time value. 129 -))) 130 130 131 -((( 132 132 If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01. 133 -))) 134 134 135 135 * **Example 1**: Downlink Payload:** 0100001E** ~/~/ Set Transmit Interval (TDC) = 30 seconds 136 136 * **Example 2**: Downlink Payload:** 0100003C** ~/~/ Set Transmit Interval (TDC) = 60 seconds ... ... @@ -140,10 +140,10 @@ 140 140 Feature: Reboot End Node to perform a new OTAA or ABP Join. 141 141 142 142 {{info}} 143 - **AT Command: ATZ**78 +AT Command: ATZ 144 144 {{/info}} 145 145 146 -(% border=" 1" style="background-color:#ffffcc; color:green; width:727.222px" %)81 +(% border="0" class="doOddEven filterable grid sortable" id="tableid" style="background-color:#ffffcc; color:green; width:727.222px" %) 147 147 |=(% colspan="3" %)ATZ: Trig a reset of the MCU 148 148 |**Command Example**|**Function**|**Response** 149 149 |ATZ|Reset MCU|((( ... ... @@ -160,56 +160,35 @@ 160 160 <followed by the Tx and Rx information> 161 161 ))) 162 162 163 -{{info}} 164 -**Downlink Command: 0x04** 165 -{{/info}} 98 +Downlink Command: 0x04 166 166 167 -((( 168 168 Format: Command Code (0x04) followed by FF. 169 -))) 170 170 171 -((( 172 -If the downlink payload=**04FF**, the end node will reboot. 102 +If the downlink payload=04FF, the end node will reboot. 173 173 174 - 175 -))) 176 - 177 177 == 4.3 Reset to factory Default == 178 178 179 179 Feature: Reset the parameters to Factory Default, factory default value depends on the firmware settings, the OTAA and ABP keys will reserve after this command. 180 180 181 -{{info}} 182 -**AT Command: AT+FDR** 183 -{{/info}} 108 +AT Command: AT+FDR 184 184 185 -(% border="1" style="background-color:#ffffcc; color:green; width:831.222px" %) 186 -|=(% colspan="3" style="width: 828px;" %)Reset to factory default 187 -|(% style="width:181px" %)**Command Example**|(% style="width:181px" %)**Function**|(% style="width:465px" %)**Response** 188 -|(% style="width:181px" %)AT+FDR|(% style="width:181px" %)Reset to factory default|(% style="width:465px" %)((( 189 -Device reset to factory default parameters and show booting info 110 +|=(% colspan="3" %)Reset to factory default 111 +|**Command Example**|**Function**|**Response** 112 +|AT+FDR|Reset to factory default|Device reset to factory default parameters and show booting info 190 190 191 -LSN50 Device/LoRa ST Module 192 - 114 +{{{LSN50 Device/LoRa ST Module 193 193 Image Version: XX 194 - 195 195 Frequency Band: XX 196 - 197 197 DevEui= XX XX XX XX XX XX XX XX 198 - 199 199 Please set the parameters or reset Device to apply change 200 - )))119 +}}} 201 201 202 -{{info}} 203 -**Downlink Command: 0x04** 204 -{{/info}} 205 205 206 -((( 122 +Downlink Command: 0x04 123 + 207 207 Format: Command Code (0x04) followed by FE. 208 -))) 209 209 210 -((( 211 -If the downlink payload=**04FE**, Reset Parameters to Factory Default, Keys Reserve. 212 -))) 126 +If the downlink payload=04FE, Reset Parameters to Factory Default, Keys Reserve. 213 213 214 214 215 215 == 4.4 Show Firmware Version == ... ... @@ -216,42 +216,30 @@ 216 216 217 217 Feature: Show firmware version. No downlink command yet. 218 218 219 -{{info}} 220 -**AT Command: AT+VER** 221 -{{/info}} 133 +AT Command: AT+VER 222 222 223 -(% border="1" style="background-color:#ffffcc; color:green; width:586px" %) 224 -|=(% colspan="3" style="width: 583px;" %)AT+VER: Image Version and Frequency Band 225 -|(% style="width:170px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:113px" %)**Response** 226 -|(% style="width:170px" %)AT+VER=?|(% style="width:300px" %)Show Image version and Frequency Band|(% style="width:113px" %)((( 227 -1.3 EU868 135 +|=(% colspan="3" %)AT+VER: Image Version and Frequency Band 136 +|**Command Example**|**Function**|**Response** 137 +|AT+VER=?|Show Image version and Frequency Band| 228 228 139 +{{{1.3 EU868 229 229 OK 230 - )))141 +}}} 231 231 232 -{{info}} 233 -**Downlink Command: 0x26 (Valid in 006 stack)** 234 -{{/info}} 235 235 236 -((( 144 +Downlink Command: 0x26 (Valid in 006 stack) 145 + 237 237 Downlink Format: 0x26 238 -))) 239 239 240 -((( 241 241 Device will reply with firmware version info, device info. frequency band info. detail please check device user manual. Total 5 bytes Example: If device is of firmware version 1.1.0 Upload: xx ~-~- yy ~-~- zz ~-~- 110 total 5 bytes 242 -))) 243 243 244 -((( 245 -**xx: Software Type:** 246 -))) 150 +xx: Software Type: 247 247 248 248 * 0x00 01: LGT92 Version 249 249 * 0x00 02: LBT1 250 250 * 0x00 03: LSE01/LDDS75/LDDS20/LSPH01/LLMS01/LSNPK01 251 251 252 -((( 253 -**yy: Frequency Band:** 254 -))) 156 +yy: Frequency Band: 255 255 256 256 * 0x01: EU868 257 257 * 0x02: US915 ... ... @@ -264,9 +264,7 @@ 264 264 * 0x09: AS923-2 265 265 * 0xa0: AS923-3 266 266 267 -((( 268 -**zz: Subband** 269 -))) 169 +zz: Subband 270 270 271 271 firmware version: v1.1.0 ~-~-> 110 272 272 ... ... @@ -275,27 +275,21 @@ 275 275 276 276 Feature: Show All configure. No downlink command yet. 277 277 278 -{{info}} 279 -**AT Command: AT+CFG** 280 -{{/info}} 178 +AT Command: AT+CFG 281 281 282 -(% border="1" style="background-color:#ffffcc; color:green; width:599.222px" %) 283 -|=(% colspan="3" style="width: 596px;" %)AT+CFG: Print all configurations 284 -|(% style="width:160px" %)**Command Example**|(% style="width:154px" %)**Function**|(% style="width:280px" %)**Response** 285 -|(% style="width:160px" %)AT+CFG|(% style="width:154px" %)Show all configures|(% style="width:280px" %)((( 286 -AT+DEUI = XX XX XX XX XX XX XX XX 180 +|=(% colspan="3" %)AT+CFG: Print all configurations 181 +|**Command Example**|**Function**|**Response** 182 +|AT+CFG|Show all configures| 287 287 184 +{{{AT+DEUI = XX XX XX XX XX XX XX XX 288 288 AT+DADDR=XXXXXXXX 289 - 290 290 ………. 291 - 292 292 AT+RX2WTO=X 293 - 294 294 AT+CHS=868100000 295 - 296 296 OK 297 - )))190 +}}} 298 298 192 + 299 299 = 5. Keys, IDs and EUIs management = 300 300 301 301 == 5.1 Application EUI == ... ... @@ -302,49 +302,40 @@ 302 302 303 303 Feature: Get or Set the Application EUI. 304 304 305 -{{info}} 306 -**AT Command: AT+APPEUI** 307 -{{/info}} 199 +AT Command: AT+APPEUI 308 308 309 -(% border="1" style="background-color:#ffffcc; color:green; width:686.222px" %) 310 -|=(% colspan="3" style="width: 683px;" %)AT+APPEUI 311 -|(% style="width:305px" %)**Command Example**|(% style="width:186px" %)**Function**|(% style="width:191px" %)**Response** 312 -|(% style="width:305px" %)AT+APPEUI=?|(% style="width:186px" %)Get the Application EUI|(% style="width:191px" %)00 b3 d5 00 00 00 00 00((( 201 +|=(% colspan="3" %)AT+APPEUI 202 +|**Command Example**|**Function**|**Response** 203 +|AT+APPEUI=?|Get the Application EUI|00 b3 d5 00 00 00 00 00((( 313 313 OK 314 314 ))) 315 -| (% style="width:305px" %)AT+APPEUI=00 b3 d5 7e f0 00 4d 34|(% style="width:186px" %)Set the Application EUI|(% style="width:191px" %)OK206 +|AT+APPEUI=00 b3 d5 7e f0 00 4d 34|Set the Application EUI|OK 316 316 317 317 == 5.2 Application Key == 318 318 319 319 Feature: Get or Set the Application Key. 320 320 321 -{{info}} 322 -**AT Command: AT+APPKEY** 323 -{{/info}} 212 +AT Command: AT+APPKEY 324 324 325 -(% border="1" style="background-color:#ffffcc; color:green; width:976.222px" %) 326 -|=(% colspan="3" style="width: 973px;" %)AT+APPKEY 327 -|(% style="width:441px" %)**Command Example**|(% style="width:180px" %)**Function**|(% style="width:350px" %)**Response** 328 -|(% style="width:441px" %)AT+APPKEY=?|(% style="width:180px" %)Get the Application Key|(% style="width:350px" %)00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35((( 214 +|=(% colspan="3" %)AT+APPKEY 215 +|**Command Example**|**Function**|**Response** 216 +|AT+APPKEY=?|Get the Application Key|00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35((( 329 329 OK 330 330 ))) 331 -| (% style="width:441px" %)AT+APPKEY=00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35|(% style="width:180px" %)Set the Application Key|(% style="width:350px" %)OK219 +|AT+APPKEY=00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35|Set the Application Key.|OK 332 332 333 333 == 5.3 Application Session Key == 334 334 335 335 Feature: Get or Set the Application Session Key. 336 336 337 -{{info}} 338 -**AT Command: AT+APPSKEY** 339 -{{/info}} 225 +AT Command: AT+APPSKEY 340 340 341 -(% border="1" style="background-color:#ffffcc; color:green; width:1040.22px" %) 342 -|=(% colspan="3" style="width: 1037px;" %)AT+APPSKEY 343 -|(% style="width:451px" %)**Command Example**|(% style="width:231px" %)**Function**|(% style="width:354px" %)**Response** 344 -|(% style="width:451px" %)AT+APPSKEY=?|(% style="width:231px" %)Get the Application Session Key|(% style="width:354px" %)00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2((( 227 +|=(% colspan="3" %)AT+APPSKEY 228 +|**Command Example**|**Function**|**Response** 229 +|AT+APPSKEY=?|Get the Application Session Key|00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2((( 345 345 OK 346 346 ))) 347 -| (% style="width:451px" %)AT+APPSKEY=00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2|(% style="width:231px" %)Set the Application Session Key|(% style="width:354px" %)(While Error in format, return AT_PARAM_ERROR)(((232 +|AT+APPSKEY=00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2|Set the Application Session Key.|(While Error in format, return AT_PARAM_ERROR)((( 348 348 OK 349 349 ))) 350 350 ... ... @@ -352,76 +352,58 @@ 352 352 353 353 Feature: Get or Set the Device Address. 354 354 355 -{{info}} 356 -**AT Command: AT+DADDR** 357 -{{/info}} 240 +AT Command: AT+DADDR 358 358 359 -(% border="1" style="background-color:#ffffcc; color:green; width:795.222px" %) 360 -|=(% colspan="3" style="width: 792px;" %)AT+DADDR 361 -|(% style="width:192px" %)**Command Example**|(% style="width:241px" %)**Function**|(% style="width:359px" %)**Response** 362 -|(% style="width:192px" %)AT+DADDR=?|(% style="width:241px" %)Get the Application Session Key.|(% style="width:359px" %)(While Error in format, return AT_PARAM_ERROR)((( 242 +|=(% colspan="3" %)AT+DADDR 243 +|**Command Example**|**Function**|**Response** 244 +|AT+DADDR=?|Get the Application Session Key.|(While Error in format, return AT_PARAM_ERROR)((( 363 363 A8 40 41 FF 364 364 365 365 OK 366 366 ))) 367 -| (% style="width:192px" %)AT+DADDR=A8 40 41 FF|(% style="width:241px" %)Set the Application Session Key.|(% style="width:359px" %)OK249 +|AT+DADDR=A8 40 41 FF|Set the Application Session Key.|OK 368 368 369 - 370 370 == 5.5 Device EUI == 371 371 372 372 Feature: Get or Set the Device EUI. 373 373 374 -{{info}} 375 -**AT Command: AT+DEUI** 376 -{{/info}} 255 +AT Command: AT+DEUI 377 377 378 -(% border="1" style="background-color:#ffffcc; color:green; width:1035.22px" %) 379 -|=(% colspan="3" style="width: 1032px;" %)AT+DEUI 380 -|(% style="width:250px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:634px" %)**Response** 381 -|(% style="width:250px" %)AT+DEUI=?|(% style="width:147px" %)Get the Device EUI.|(% style="width:634px" %)00 44 34 22 33 45 55 55((( 257 +|=(% colspan="3" %)AT+DEUI 258 +|**Command Example**|**Function**|**Response** 259 +|AT+DEUI=?|Get the Device EUI.|00 44 34 22 33 45 55 55((( 382 382 OK 383 383 ))) 384 -| (% style="width:250px" %)AT+DEUI=A8 40 41 FF FF 12 34 56|(% style="width:147px" %)Set the Device EUI.|(% style="width:634px" %)(System will write new value to Device EUI,While Error in format, return AT_PARAM_ERROR)(((262 +|AT+DEUI=A8 40 41 FF FF 12 34 56|Set the Device EUI.|(System will write new value to Device EUI,While Error in format, return AT_PARAM_ERROR)((( 385 385 OK 386 386 ))) 387 387 388 - 389 389 == 5.6 Network ID == 390 390 391 391 Feature: Get or Set the Network ID.(You can enter this command change only after successful network connection) 392 392 393 -{{info}} 394 -**AT Command: AT+NWKID** 395 -{{/info}} 270 +AT Command: AT+NWKID 396 396 397 -(% border="1" style="background-color:#ffffcc; color:green; width:448.222px" %) 398 -|=(% colspan="3" style="width: 445px;" %)AT+NWKID 399 -|(% style="width:191px" %)**Command Example**|(% style="width:153px" %)**Function**|(% style="width:101px" %)**Response** 400 -|(% style="width:191px" %)AT+NWKID=?|(% style="width:153px" %)Get the Network ID.|(% style="width:101px" %)a8 40 41 ff((( 272 +|=(% colspan="3" %)AT+NWKID 273 +|**Command Example**|**Function**|**Response** 274 +|AT+NWKID=?|Get the Network ID.|a8 40 41 ff((( 401 401 OK 402 402 ))) 403 -| (% style="width:191px" %)AT+NWKID=A8 40 41 FF|(% style="width:153px" %)Set the Network ID.|(% style="width:101px" %)OK277 +|AT+NWKID=A8 40 41 FF|Set the Network ID.|OK 404 404 405 - 406 - 407 407 == 5.7 Network Session Key == 408 408 409 409 Feature: Get or Set the Network Session Key 410 410 411 -{{info}} 412 -**AT Command: AT+NWKSKEY** 413 -{{/info}} 283 +AT Command: AT+NWKSKEY 414 414 415 -(% border="1" style="background-color:#ffffcc; color:green; width:1017.22px" %) 416 -|=(% colspan="3" style="width: 1014px;" %)AT+NWKSKEY 417 -|(% style="width:455px" %)**Command Example**|(% style="width:215px" %)**Function**|(% style="width:343px" %)**Response** 418 -|(% style="width:455px" %)AT+NWKSKEY=?|(% style="width:215px" %)Get the Network Session Key.|(% style="width:343px" %)00 4f 19 25 52 ce 97 09 d7 fa 84 71 db 51 02 92((( 285 +|=(% colspan="3" %)AT+NWKSKEY 286 +|**Command Example**|**Function**|**Response** 287 +|AT+NWKSKEY=?|Get the Network Session Key.|00 4f 19 25 52 ce 97 09 d7 fa 84 71 db 51 02 92((( 419 419 OK 420 420 ))) 421 -| (% style="width:455px" %)AT+NWKSKEY=A8 40 41 FF FF 12 34 56 00 01 02 04 05 06 06 07|(% style="width:215px" %)Set the Network Session Key.|(% style="width:343px" %)OK290 +|AT+NWKSKEY=A8 40 41 FF FF 12 34 56 00 01 02 04 05 06 06 07|Set the Network Session Key.|OK 422 422 423 - 424 - 425 425 = 6. Joining and sending date on LoRaWAN network = 426 426 427 427 == 6.1 Confirm Mode == ... ... @@ -428,18 +428,15 @@ 428 428 429 429 Feature: Get or Set the confirmation mode (0-1). 430 430 431 -{{info}} 432 -**AT Command: AT+CFM** 433 -{{/info}} 298 +AT Command: AT+CFM 434 434 435 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %) 436 -|=(% colspan="3" style="width: 707px;" %)AT+CFM 437 -|(% style="width:155px" %)**Command Example**|(% style="width:205px" %)**Function**|(% style="width:346px" %)**Response** 438 -|(% style="width:155px" %)AT+CFM=?|(% style="width:205px" %)Get the confirmation mode|(% style="width:346px" %)0((( 300 +|=(% colspan="3" %)AT+CFM 301 +|**Command Example**|**Function**|**Response** 302 +|AT+CFM=?|Get the confirmation mode|0((( 439 439 OK 440 440 ))) 441 -| (% style="width:155px" %)AT+CFM=1|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)OK442 -| (% style="width:155px" %)AT+CFM=2|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)While Error in format, return AT_PARAM_ERROR305 +|AT+CFM=1|Set the confirmation mode|OK 306 +|AT+CFM=2|Set the confirmation mode|While Error in format, return AT_PARAM_ERROR 443 443 444 444 Downlink Command: 0x05 445 445 ... ... @@ -450,86 +450,64 @@ 450 450 * Example 1: Downlink Payload: 0501 ~/~/ Set AT+CFM=1 451 451 * Example 2: Downlink Payload: 0500 ~/~/ Set AT+CFM=0 452 452 453 - 454 - 455 455 == 6.2 Confirm Status == 456 456 457 457 Feature: Get confirmation status of the last AT+SEND (0-1). 458 458 459 -{{info}} 460 -**AT Command: AT+CFS** 461 -{{/info}} 321 +AT Command: AT+CFS 462 462 463 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %) 464 -|=(% colspan="3" style="width: 531px;" %)AT+CFS 465 -|(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:178px" %)**Response** 466 -|(% style="width:156px" %)AT+CFS=?|(% style="width:193px" %)Get confirmation status|(% style="width:178px" %)0((( 323 +|=(% colspan="3" %)AT+CFS 324 +|**Command Example**|**Function**|**Response** 325 +|AT+CFS=?|Get confirmation status|0((( 467 467 OK 468 468 ))) 469 469 470 - 471 - 472 472 == 6.3 Join LoRa® Network == 473 473 474 474 Feature: Join network. 475 475 476 -{{info}} 477 -**AT Command: AT+JOIN** 478 -{{/info}} 333 +AT Command: AT+JOIN 479 479 480 -(% border="1" style="background-color:#ffffcc; color:green; width:647.222px" %) 481 -|=(% colspan="3" style="width: 644px;" %)AT+JOIN 482 -|(% style="width:163px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:334px" %)**Response** 483 -|(% style="width:163px" %)AT+JOIN ?|(% style="width:147px" %)Get imformation.|(% style="width:334px" %)AT+JOIN: Join network((( 335 +|=(% colspan="3" %)AT+JOIN 336 +|**Command Example**|**Function**|**Response** 337 +|AT+JOIN ?|Get imformation.|AT+JOIN: Join network((( 484 484 OK 485 485 486 486 While Error in format, return AT_BUSY_ERROR 487 487 ))) 488 488 489 - 490 - 491 491 == 6.4 LoRa® Network Join Mode == 492 492 493 493 Feature: Get or Set the Network Join Mode. (0: ABP, 1: OTAA). 494 494 495 -{{info}} 496 -**AT Command: AT+NJM** 497 -{{/info}} 347 +AT Command: AT+NJM 498 498 499 -(% border="1" style="background-color:#ffffcc; color:green; width:753.222px" %) 500 -|=(% colspan="3" style="width: 750px;" %)AT+NJM 501 -|(% style="width:162px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:361px" %)**Response** 502 -|(% style="width:162px" %)AT+NJM=?|(% style="width:227px" %)Get the Network Join Mode|(% style="width:361px" %)1((( 349 +|=(% colspan="3" %)AT+NJM 350 +|**Command Example**|**Function**|**Response** 351 +|AT+NJM=?|Get the Network Join Mode|1((( 503 503 OK 504 504 ))) 505 -| (% style="width:162px" %)AT+NJM=0|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)OK506 -| (% style="width:162px" %)AT+NJM=2|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)While Error in format, return AT_PARAM_ERROR354 +|AT+NJM=0|Set the Network Join Mode|OK 355 +|AT+NJM=2|Set the Network Join Mode|While Error in format, return AT_PARAM_ERROR 507 507 508 -{{info}} 509 -**Downlink Command: 0x20** 510 -{{/info}} 357 +Downlink Command: 0x20 511 511 512 512 Format: Command Code (0x20) followed by 1 bytes mode value. 513 513 514 514 If the downlink payload=2000, it means set the Network Join Mode, while type code is 20. 515 515 516 -* **Example 1:**Downlink Payload:**2000**~/~/ Set AT+NJM=O517 -* **Example 2:**Downlink Payload:**2001**~/~/ Set AT+NJM=1363 +* Example 1: Downlink Payload: 2000 ~/~/ Set AT+NJM=O 364 +* Example 2: Downlink Payload: 2001 ~/~/ Set AT+NJM=1 518 518 519 - 520 - 521 521 == 6.5 LoRa® Network Join Status == 522 522 523 523 Feature: LoRa® Network Join Status. 524 524 525 -{{info}} 526 -**AT Command: AT+NJS** 527 -{{/info}} 370 +AT Command: AT+NJS 528 528 529 -(% border="1" style="background-color:#ffffcc; color:green; width:498.222px" %) 530 -|=(% colspan="3" style="width: 495px;" %)AT+NJS 531 -|(% style="width:169px" %)**Command Example**|(% style="width:164px" %)**Function**|(% style="width:161px" %)**Response** 532 -|(% style="width:169px" %)AT+NJS=?|(% style="width:164px" %)Get the join status.|(% style="width:161px" %)0((( 372 +|=(% colspan="3" %)AT+NJS 373 +|**Command Example**|**Function**|**Response** 374 +|AT+NJS=?|Get the join status.|0((( 533 533 OK 534 534 ))) 535 535 ... ... @@ -537,14 +537,11 @@ 537 537 538 538 Feature: Print Last Received Data in Raw Format<port:data>. 539 539 540 -{{info}} 541 -**AT Command: AT+RECV** 542 -{{/info}} 382 +AT Command: AT+RECV 543 543 544 -(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %) 545 -|=(% colspan="3" style="width: 584px;" %)AT+RECV 546 -|(% style="width:161px" %)**Command Example**|(% style="width:272px" %)**Function**|(% style="width:150px" %)**Response** 547 -|(% style="width:161px" %)AT+RECV=?|(% style="width:272px" %)print last received data in raw format.|(% style="width:150px" %)0:((( 384 +|=(% colspan="3" %)AT+RECV 385 +|**Command Example**|**Function**|**Response** 386 +|AT+RECV=?|print last received data in raw format.|0:((( 548 548 OK 549 549 ))) 550 550 ... ... @@ -552,14 +552,11 @@ 552 552 553 553 Feature: Print Last Received Data in Binary Format<port:data>. 554 554 555 -{{info}} 556 -**AT Command: AT+RECVB** 557 -{{/info}} 394 +AT Command: AT+RECVB 558 558 559 -(% border="1" style="background-color:#ffffcc; color:green; width:793.222px" %) 560 -|=(% colspan="3" style="width: 790px;" %)AT+RECVB 561 -|(% style="width:173px" %)**Command Example**|(% style="width:497px" %)**Function**|(% style="width:120px" %)**Response** 562 -|(% style="width:173px" %)AT+RECVB=?|(% style="width:497px" %)print last received data in binary format (with hexadecimal values).|(% style="width:120px" %)2: 0010((( 396 +|=(% colspan="3" %)AT+RECVB 397 +|**Command Example**|**Function**|**Response** 398 +|AT+RECVB=?|print last received data in binary format (with hexadecimal values).|2: 0010((( 563 563 OK 564 564 ))) 565 565 ... ... @@ -567,14 +567,11 @@ 567 567 568 568 Feature: Send Text Data<port:data>. 569 569 570 -{{info}} 571 -**AT Command: AT+SEND** 572 -{{/info}} 406 +AT Command: AT+SEND 573 573 574 -(% border="1" style="background-color:#ffffcc; color:green; width:991.222px" %) 575 -|=(% colspan="3" style="width: 988px;" %)AT+SEND 576 -|(% style="width:201px" %)**Command Example**|(% style="width:340px" %)**Function**|(% style="width:446px" %)**Response** 577 -|(% style="width:201px" %)AT+SEND=12:hello world|(% style="width:340px" %)Send text data along with the application port.|(% style="width:446px" %)OK((( 408 +|=(% colspan="3" %)AT+SEND 409 +|**Command Example**|**Function**|**Response** 410 +|AT+SEND=12:hello world|Send text data along with the application port.|OK((( 578 578 While Error in format, return 579 579 580 580 AT_BUSY_ERROR/AT_BUSY_ERROR/AT_NO_NETWORK_JOINED ... ... @@ -586,15 +586,12 @@ 586 586 587 587 Feature: Send hexadecimal data along with the application port. 588 588 589 -{{info}} 590 -**AT Command: AT+SENDB** 591 -{{/info}} 422 +AT Command: AT+SENDB 592 592 593 -(% border="1" style="background-color:#ffffcc; color:green; width:1120.22px" %) 594 -|=(% colspan="3" style="width: 1117px;" %)AT+SENDB 595 -|(% style="width:257px" %)**Command Example**|(% style="width:406px" %)**Function**|(% style="width:453px" %)**Response** 596 -|(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)OK 597 -|(% style="width:257px" %)AT+SENDB=abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)While Error in format, return((( 424 +|=(% colspan="3" %)AT+SENDB 425 +|**Command Example**|**Function**|**Response** 426 +|AT+SENDB=12:abcdef0123456789|Send hexadecimal data along with the application port.|OK 427 +|AT+SENDB=abcdef0123456789|Send hexadecimal data along with the application port.|While Error in format, return((( 598 598 AT_PARAM_ERROR AT_BUSY_ERROR/AT_NO_NETWORK_JOINED 599 599 600 600 ... ... @@ -606,46 +606,39 @@ 606 606 607 607 Feature: Get or Set the Adaptive Data Rate setting. (0: off, 1: on). 608 608 609 -{{info}} 610 -**AT Command: AT+ADR** 611 -{{/info}} 612 612 613 -(% border="1" style="background-color:#ffffcc; color:green; width:683.222px" %) 614 -|=(% colspan="3" style="width: 680px;" %)AT+ADR 615 -|(% style="width:162px" %)**Command Example**|(% style="width:266px" %)**Function**|(% style="width:250px" %)**Response** 616 -|(% style="width:162px" %)AT+ADR=?|(% style="width:266px" %)Get the Adaptive Data Rate setting.|(% style="width:250px" %)1((( 440 +AT Command: AT+ADR 441 + 442 +|=(% colspan="3" %)AT+ADR 443 +|**Command Example**|**Function**|**Response** 444 +|AT+ADR=?|Get the Adaptive Data Rate setting.|1((( 617 617 OK 618 618 ))) 619 -| (% style="width:162px" %)AT+ADR=0|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:250px" %)OK620 -| (% style="width:162px" %)AT+ADR=2|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:250px" %)While Error in format, return(((447 +|AT+ADR=0|Set the Adaptive Data Rate setting.|OK 448 +|AT+ADR=2|Set the Adaptive Data Rate setting.|While Error in format, return((( 621 621 AT_PARAM_ERROR 622 622 ))) 623 623 624 -{{info}} 625 -**Downlink Command: 0x22** 626 -{{/info}} 452 +Downlink Command: 0x22 627 627 628 628 629 629 If the downlink payload=2201, it means setting the adaptive data rate to 1, while type code is 22. 630 630 631 -* **Example 1**: Downlink Payload:**2201**~/~/ Set AT+ADR=1.632 -* **Example 2**: Downlink Payload:**2200FFFF**~/~/ Set AT+ADR=0.457 +* Example 1: Downlink Payload: 2201 ~/~/ Set AT+ADR=1. 458 +* Example 2: Downlink Payload: 2200FFFF ~/~/ Set AT+ADR=0. 633 633 634 634 == 7.2 LoRa® Class == 635 635 636 636 Feature: Get or Set the Device Class(Currently only support class A, class C). 637 637 638 -{{info}} 639 -**AT Command:AT+CLASS** 640 -{{/info}} 464 +AT Command:AT+CLASS 641 641 642 -(% border="1" style="background-color:#ffffcc; color:green; width:507.222px" %) 643 -|=(% colspan="3" style="width: 504px;" %)AT+CLASS 644 -|(% style="width:163px" %)**Command Example**|(% style="width:166px" %)**Function**|(% style="width:175px" %)**Response** 645 -|(% style="width:163px" %)AT+CLASS=?|(% style="width:166px" %)Get the Device Class.|(% style="width:175px" %)A((( 466 +|=(% colspan="3" %)AT+CLASS 467 +|**Command Example**|**Function**|**Response** 468 +|AT+CLASS=?|Get the Device Class.|A((( 646 646 OK 647 647 ))) 648 -| (% style="width:163px" %)AT+CLASS=C|(% style="width:166px" %)Set the Device Class.|(% style="width:175px" %)OK(((471 +|AT+CLASS=C|Set the Device Class.|OK((( 649 649 650 650 ))) 651 651 ... ... @@ -653,17 +653,14 @@ 653 653 654 654 Feature: Get or Set the ETSI Duty Cycle setting - 0=disable, 1=enable - Only for testing. 655 655 656 -{{info}} 657 -**AT Command:AT+DCS** 658 -{{/info}} 479 +AT Command:AT+DCS 659 659 660 -(% border="1" style="background-color:#ffffcc; color:green; width:515.222px" %) 661 -|=(% colspan="3" style="width: 512px;" %)AT+DCS 662 -|(% style="width:165px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:107px" %)**Response** 663 -|(% style="width:165px" %)AT+DCS=?|(% style="width:239px" %)Get the ETSI Duty Cycle setting.|(% style="width:107px" %)1((( 481 +|=(% colspan="3" %)AT+DCS 482 +|**Command Example**|**Function**|**Response** 483 +|AT+DCS=?|Get the ETSI Duty Cycle setting.|1((( 664 664 OK 665 665 ))) 666 -| (% style="width:165px" %)AT+DCS=1|(% style="width:239px" %)Set the ETSI Duty Cycle setting.|(% style="width:107px" %)OK(((486 +|AT+DCS=1|Set the ETSI Duty Cycle setting.|OK((( 667 667 668 668 ))) 669 669 ... ... @@ -671,45 +671,37 @@ 671 671 672 672 Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) . Note: while set Data Rate, please use set Adptive Data Rate, ADR=0 first. otherwise device will response to server's ADR command and change the DR to the setting from server 673 673 674 -{{info}} 675 -**AT Command: AT+DR** 676 -{{/info}} 494 +AT Command: AT+DR 677 677 678 -(% border="1" style="background-color:#ffffcc; color:green; width:466.222px" %) 679 -|=(% colspan="3" style="width: 463px;" %)AT+DR 680 -|(% style="width:156px" %)**Command Example**|(% style="width:167px" %)**Function**|(% style="width:140px" %)**Response** 681 -|(% style="width:156px" %)AT+DR=?|(% style="width:167px" %)Get the Data Rate.|(% style="width:140px" %)5((( 496 +|=(% colspan="3" %)AT+DR 497 +|**Command Example**|**Function**|**Response** 498 +|AT+DR=?|Get the Data Rate.|5((( 682 682 OK 683 683 ))) 684 -| (% style="width:156px" %)AT+DR=2|(% style="width:167px" %)Set the Data Rate.|(% style="width:140px" %)OK(((501 +|AT+DR=2|Set the Data Rate.|OK((( 685 685 686 686 ))) 687 687 688 -{{info}} 689 -**Downlink Command: 0x2200aaFF** 690 -{{/info}} 505 +Downlink Command: 0x2200aaFF 691 691 692 692 693 693 If the downlink payload=220001FF, it means setting the data rate to 1, while type code is 22 00 aa FF. 694 694 695 -* **Example 1**: Downlink Payload:**220001FF**~/~/ Set AT+DR=1.696 -* **Example 2**: Downlink Payload:**220000FF**~/~/ Set AT+DR=0.510 +* Example 1: Downlink Payload: 220001FF ~/~/ Set AT+DR=1. 511 +* Example 2: Downlink Payload: 220000FF ~/~/ Set AT+DR=0. 697 697 698 698 == 7.5 Frame Counter Downlink == 699 699 700 700 Feature: Get or Set the Frame Counter Downlink. 701 701 702 -{{info}} 703 -**AT Command:AT+FCD** 704 -{{/info}} 517 +AT Command:AT+FCD 705 705 706 -(% border="1" style="background-color:#ffffcc; color:green; width:693.222px" %) 707 -|=(% colspan="3" style="width: 690px;" %)AT+FCD 708 -|(% style="width:162px" %)**Command Example**|(% style="width:258px" %)**Function**|(% style="width:269px" %)**Response** 709 -|(% style="width:162px" %)AT+FCD=?|(% style="width:258px" %)Get the Frame Counter Downlink.|(% style="width:269px" %)0((( 519 +|=(% colspan="3" %)AT+FCD 520 +|**Command Example**|**Function**|**Response** 521 +|AT+FCD=?|Get the Frame Counter Downlink.|0((( 710 710 OK 711 711 ))) 712 -| (% style="width:162px" %)AT+FCD=10|(% style="width:258px" %)Set the Frame Counter Downlink.|(% style="width:269px" %)(System will write new value to FCD)(((524 +|AT+FCD=10|Set the Frame Counter Downlink.|(System will write new value to FCD)((( 713 713 OK 714 714 715 715 ... ... @@ -719,17 +719,14 @@ 719 719 720 720 Feature: Get or Set the Frame Counter Uplink. 721 721 722 -{{info}} 723 -**AT Command:AT+FCU** 724 -{{/info}} 534 +AT Command:AT+FCU 725 725 726 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %) 727 -|=(% colspan="3" style="width: 531px;" %)AT+FCU 728 -|(% style="width:177px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:113px" %)**Response** 729 -|(% style="width:177px" %)AT+FCU=?|(% style="width:239px" %)Get the Frame Counter Uplink.|(% style="width:113px" %)0((( 536 +|=(% colspan="3" %)AT+FCU 537 +|**Command Example**|**Function**|**Response** 538 +|AT+FCU=?|Get the Frame Counter Uplink.|0((( 730 730 OK 731 731 ))) 732 -| (% style="width:177px" %)AT+FCU=10|(% style="width:239px" %)Set the Frame Counter Uplink.|(% style="width:113px" %)OK(((541 +|AT+FCU=10|Set the Frame Counter Uplink.|OK((( 733 733 734 734 ))) 735 735 ... ... @@ -737,17 +737,14 @@ 737 737 738 738 Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 1 in ms. 739 739 740 -{{info}} 741 -**AT Command:AT+JN1DL** 742 -{{/info}} 549 +AT Command:AT+JN1DL 743 743 744 -(% border="1" style="background-color:#ffffcc; color:green; width:537.222px" %) 745 -|=(% colspan="3" style="width: 534px;" %)AT+JN1DL 746 -|(% style="width:164px" %)**Command Example**|(% style="width:229px" %)**Function**|(% style="width:140px" %)**Response** 747 -|(% style="width:164px" %)AT+JN1DL=?|(% style="width:229px" %)Get the Join Accept Delay.|(% style="width:140px" %)5000((( 551 +|=(% colspan="3" %)AT+JN1DL 552 +|**Command Example**|**Function**|**Response** 553 +|AT+JN1DL=?|Get the Join Accept Delay.|5000((( 748 748 OK 749 749 ))) 750 -| (% style="width:164px" %)AT+JN1DL=10000|(% style="width:229px" %)Set the Join Accept Delay.|(% style="width:140px" %)OK(((556 +|AT+JN1DL=10000|Set the Join Accept Delay.|OK((( 751 751 752 752 ))) 753 753 ... ... @@ -755,17 +755,14 @@ 755 755 756 756 Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 2 in ms. 757 757 758 -{{info}} 759 -**AT Command:AT+JN2DL** 760 -{{/info}} 564 +AT Command:AT+JN2DL 761 761 762 -(% border="1" style="background-color:#ffffcc; color:green; width:538.222px" %) 763 -|=(% colspan="3" style="width: 535px;" %)AT+JN2DL 764 -|(% style="width:160px" %)**Command Example**|(% style="width:228px" %)**Function**|(% style="width:146px" %)**Response** 765 -|(% style="width:160px" %)AT+JN2DL=?|(% style="width:228px" %)Get the Join Accept Delay.|(% style="width:146px" %)6000((( 566 +|=(% colspan="3" %)AT+JN2DL 567 +|**Command Example**|**Function**|**Response** 568 +|AT+JN2DL=?|Get the Join Accept Delay.|6000((( 766 766 OK 767 767 ))) 768 -| (% style="width:160px" %)AT+JN2DL=20000|(% style="width:228px" %)Set the Join Accept Delay.|(% style="width:146px" %)OK(((571 +|AT+JN2DL=20000|Set the Join Accept Delay.|OK((( 769 769 770 770 ))) 771 771 ... ... @@ -773,17 +773,14 @@ 773 773 774 774 Feature: Get or Set the public network mode. (0: off, 1: on) 775 775 776 -{{info}} 777 -**AT Command:AT+PNM** 778 -{{/info}} 579 +AT Command:AT+PNM 779 779 780 -(% border="1" style="background-color:#ffffcc; color:green; width:667.222px" %) 781 -|=(% colspan="3" style="width: 664px;" %)AT+PNM 782 -|(% style="width:166px" %)**Command Example**|(% style="width:225px" %)**Function**|(% style="width:272px" %)**Response** 783 -|(% style="width:166px" %)AT+PNM=?|(% style="width:225px" %)Get the public network mode.|(% style="width:272px" %)1((( 581 +|=(% colspan="3" %)AT+PNM 582 +|**Command Example**|**Function**|**Response** 583 +|AT+PNM=?|Get the public network mode.|1((( 784 784 OK 785 785 ))) 786 -| (% style="width:166px" %)AT+PNM=1|(% style="width:225px" %)Set the public network mode.|(% style="width:272px" %)(System will write new value to PNM)(((586 +|AT+PNM=1|Set the public network mode.|(System will write new value to PNM)((( 787 787 OK 788 788 789 789 ... ... @@ -793,35 +793,29 @@ 793 793 794 794 Feature: Get or Set the delay between the end of the Tx and the Rx Window 1 in ms 795 795 796 -{{info}} 797 -**AT Command:AT+RX1DL** 798 -{{/info}} 596 +AT Command:AT+RX1DL 799 799 800 -(% border="1" style="background-color:#ffffcc; color:green; width:408.222px" %) 801 -|=(% colspan="3" style="width: 405px;" %)AT+RX1DL 802 -|(% style="width:155px" %)**Command Example**|(% style="width:128px" %)**Function**|(% style="width:122px" %)**Response** 803 -|(% style="width:155px" %)AT+RX1DL=?|(% style="width:128px" %)Get the delay.|(% style="width:122px" %)1000((( 598 +|=(% colspan="3" %)AT+RX1DL 599 +|**Command Example**|**Function**|**Response** 600 +|AT+RX1DL=?|Get the delay.|1000((( 804 804 OK 805 805 ))) 806 -| (% style="width:155px" %)AT+RX1DL=1500|(% style="width:128px" %)Set the delay.|(% style="width:122px" %)OK(((603 +|AT+RX1DL=1500|Set the delay.|OK((( 807 807 808 808 ))) 809 809 810 -== 7.11 607 +== 7.11Receive Delay2 == 811 811 812 812 Feature: Get or Set the delay between the end of the Tx and the Rx Window 2 in ms 813 813 814 -{{info}} 815 -**AT Command:AT+RX2DL** 816 -{{/info}} 611 +AT Command:AT+RX2DL 817 817 818 -(% border="1" style="background-color:#ffffcc; color:green; width:481.222px" %) 819 -|=(% colspan="3" style="width: 478px;" %)AT+RX2DL 820 -|(% style="width:175px" %)**Command Example**|(% style="width:152px" %)**Function**|(% style="width:150px" %)**Response** 821 -|(% style="width:175px" %)AT+RX2DL=?|(% style="width:152px" %)Get the delay.|(% style="width:150px" %)2000((( 613 +|=(% colspan="3" %)AT+RX2DL 614 +|**Command Example**|**Function**|**Response** 615 +|AT+RX2DL=?|Get the delay.|2000((( 822 822 OK 823 823 ))) 824 -| (% style="width:175px" %)AT+RX2DL=2500|(% style="width:152px" %)Set the delay.|(% style="width:150px" %)OK(((618 +|AT+RX2DL=2500|Set the delay.|OK((( 825 825 826 826 ))) 827 827 ... ... @@ -829,17 +829,14 @@ 829 829 830 830 Feature: Get or Set the Rx2 window data rate (0-7 corresponding to DR_X) 831 831 832 -{{info}} 833 -**AT Command:AT+RX2DR** 834 -{{/info}} 626 +AT Command:AT+RX2DR 835 835 836 -(% border="1" style="background-color:#ffffcc; color:green; width:525.222px" %) 837 -|=(% colspan="3" style="width: 522px;" %)AT+RX2DR 838 -|(% style="width:160px" %)**Command Example**|(% style="width:232px" %)**Function**|(% style="width:130px" %)**Response** 839 -|(% style="width:160px" %)AT+RX2DR=?|(% style="width:232px" %)Get the Rx2 window data rate.|(% style="width:130px" %)2((( 628 +|=(% colspan="3" %)AT+RX2DR 629 +|**Command Example**|**Function**|**Response** 630 +|AT+RX2DR=?|Get the Rx2 window data rate.|2((( 840 840 OK 841 841 ))) 842 -| (% style="width:160px" %)AT+RX2DR=6|(% style="width:232px" %)Set the Rx2 window data rate.|(% style="width:130px" %)OK(((633 +|AT+RX2DR=6|Set the Rx2 window data rate.|OK((( 843 843 844 844 ))) 845 845 ... ... @@ -847,17 +847,14 @@ 847 847 848 848 Feature: Get or Set the Rx2 window frequency 849 849 850 -{{info}} 851 -**AT Command:AT+RX2FQ** 852 -{{/info}} 641 +AT Command:AT+RX2FQ 853 853 854 -(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %) 855 -|=(% colspan="3" style="width: 584px;" %)AT+RX2FQ 856 -|(% style="width:183px" %)**Command Example**|(% style="width:240px" %)**Function**|(% style="width:160px" %)**Response** 857 -|(% style="width:183px" %)AT+RX2FQ=?|(% style="width:240px" %)Get the Rx2 window frequency.|(% style="width:160px" %)434665000((( 643 +|=(% colspan="3" %)AT+RX2FQ 644 +|**Command Example**|**Function**|**Response** 645 +|AT+RX2FQ=?|Get the Rx2 window frequency.|434665000((( 858 858 OK 859 859 ))) 860 -| (% style="width:183px" %)AT+RX2FQ=434665000|(% style="width:240px" %)Set the Rx2 window frequency.|(% style="width:160px" %)OK(((648 +|AT+RX2FQ=434665000|Set the Rx2 window frequency.|OK((( 861 861 862 862 ))) 863 863 ... ... @@ -865,17 +865,14 @@ 865 865 866 866 Feature: Get or Set the Transmit Power(0-5, MAX:0, MIN:5, according to LoRaWAN Spec, or 40=10dB, 41 = 11dB, …, 50 = 20dB which is out of LoRaWAN spec. ) 867 867 868 -{{info}} 869 -**AT Command:AT+TXP** 870 -{{/info}} 656 +AT Command:AT+TXP 871 871 872 -(% border="1" style="background-color:#ffffcc; color:green; width:465.222px" %) 873 -|=(% colspan="3" style="width: 462px;" %)AT+TXP 874 -|(% style="width:161px" %)**Command Example**|(% style="width:189px" %)**Function**|(% style="width:112px" %)**Response** 875 -|(% style="width:161px" %)AT+TXP=?|(% style="width:189px" %)Get the Transmit Power.|(% style="width:112px" %)0((( 658 +|=(% colspan="3" %)AT+TXP 659 +|**Command Example**|**Function**|**Response** 660 +|AT+TXP=?|Get the Transmit Power.|0((( 876 876 OK 877 877 ))) 878 -| (% style="width:161px" %)AT+TXP=1|(% style="width:189px" %)Set the Transmit Power.|(% style="width:112px" %)OK(((663 +|AT+TXP=1|Set the Transmit Power.|OK((( 879 879 880 880 ))) 881 881 ... ... @@ -883,21 +883,18 @@ 883 883 884 884 If the downlink payload=22000100, it means setting the TXP to 0. 885 885 886 -* **Example 1**: Downlink Payload:**22000102**~/~/ Set AT+TXP=2.887 -* **Example 2**: Downlink Payload:**220000FF**~/~/ Set AT+TXP=0.671 +* Example 1: Downlink Payload: 22000102 ~/~/ Set AT+TXP=2. 672 +* Example 2: Downlink Payload: 220000FF ~/~/ Set AT+TXP=0. 888 888 889 889 == 7.15 RSSI of the Last Received Packet == 890 890 891 891 Feature: Get or Set the Rx2 window frequency 892 892 893 -{{info}} 894 -**AT Command:AT+RSSI** 895 -{{/info}} 678 +AT Command:AT+RSSI 896 896 897 -(% border="1" style="background-color:#ffffcc; color:green; width:557.222px" %) 898 -|=(% colspan="3" style="width: 554px;" %)AT+RSSI 899 -|(% style="width:164px" %)**Command Example**|(% style="width:289px" %)**Function**|(% style="width:100px" %)**Response** 900 -|(% style="width:164px" %)AT+RSSI=?|(% style="width:289px" %)Get the RSSI of the last received packet.|(% style="width:100px" %)0((( 680 +|=(% colspan="3" %)AT+RSSI 681 +|**Command Example**|**Function**|**Response** 682 +|AT+RSSI=?|Get the RSSI of the last received packet.|0((( 901 901 OK 902 902 ))) 903 903 ... ... @@ -905,14 +905,11 @@ 905 905 906 906 Feature: Get the SNR of the last received packet 907 907 908 -{{info}} 909 -**AT Command:AT+SNR** 910 -{{/info}} 690 +AT Command:AT+SNR 911 911 912 -(% border="1" style="background-color:#ffffcc; color:green; width:571.222px" %) 913 -|=(% colspan="3" style="width: 568px;" %)AT+SNR 914 -|(% style="width:164px" %)**Command Example**|(% style="width:290px" %)**Function**|(% style="width:113px" %)**Response** 915 -|(% style="width:164px" %)AT+SNR=?|(% style="width:290px" %)Get the RSSI of the last received packet.|(% style="width:113px" %)0((( 692 +|=(% colspan="3" %)AT+SNR 693 +|**Command Example**|**Function**|**Response** 694 +|AT+SNR=?|Get the RSSI of the last received packet.|0((( 916 916 OK 917 917 ))) 918 918 ... ... @@ -920,144 +920,114 @@ 920 920 921 921 Feature: Get or set the application port. 922 922 923 -{{info}} 924 -**AT Command: AT+PORT** 925 -{{/info}} 702 +AT Command: AT+PORT 926 926 927 -(% border="1" style="background-color:#ffffcc; color:green; width:500.222px" %) 928 -|=(% colspan="3" style="width: 497px;" %)AT+PORT 929 -|(% style="width:157px" %)**Command Example**|(% style="width:204px" %)**Function**|(% style="width:135px" %)**Response** 930 -|(% style="width:157px" %)AT+PORT=?|(% style="width:204px" %)Get the application port|(% style="width:135px" %)21((( 704 +|=(% colspan="3" %)AT+PORT 705 +|**Command Example**|**Function**|**Response** 706 +|AT+PORT=?|Get the application port|21((( 931 931 OK 932 932 ))) 933 -| (% style="width:157px" %)AT+PORT=21|(% style="width:204px" %)Set the application port|(% style="width:135px" %)OK709 +|AT+PORT=21|Set the application port|OK 934 934 935 -{{info}} 936 -**Downlink Command: 0x23** 937 -{{/info}} 711 +Downlink Command: 0x23 938 938 939 939 Format: Command Code (0x23) followed by 1 bytes port value. 940 940 941 941 If the downlink payload=2301, it means set the application port to 1, while type code is 23. 942 942 943 -* **Example 1**: Downlink Payload:**2301**~/~/ set the application port to 1944 -* **Example 2**: Downlink Payload:**2305**~/~/ set the application port to 5717 +* Example 1: Downlink Payload: 2301 ~/~/ set the application port to 1 718 +* Example 2: Downlink Payload: 2305 ~/~/ set the application port to 5 945 945 946 946 == 7.18 Single Channel Mode == 947 947 948 948 Feature:Get or Set Frequency (Unit: Hz) for Single Channel Mode. 949 949 950 -{{info}} 951 -**AT Command: AT+CHS** 952 -{{/info}} 724 +AT Command: AT+CHS 953 953 954 -(% border="1" style="background-color:#ffffcc; color:green; width:603.222px" %) 955 -|=(% colspan="3" style="width: 600px;" %)AT+CHS 956 -|(% style="width:182px" %)**Command Example**|(% style="width:295px" %)**Function**|(% style="width:122px" %)**Response** 957 -|(% style="width:182px" %)AT+CHS=?|(% style="width:295px" %)Get Frequency for Single Channel Mode|(% style="width:122px" %)0((( 726 +|=(% colspan="3" %)AT+CHS 727 +|**Command Example**|**Function**|**Response** 728 +|AT+CHS=?|Get Frequency for Single Channel Mode|0((( 958 958 OK 959 959 ))) 960 -| (% style="width:182px" %)AT+CHS=868100000|(% style="width:295px" %)Set Frequency for Single Channel Mode|(% style="width:122px" %)OK731 +|AT+CHS=868100000|Set Frequency for Single Channel Mode|OK 961 961 962 962 == 7.19 Eight Channel Mode == 963 963 964 964 Feature: Get or Set eight channels mode,Only for US915,AU915,CN470. 965 965 966 -{{info}} 967 -**AT Command: AT+CHE** 968 -{{/info}} 737 +AT Command: AT+CHE 969 969 970 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %) 971 -|=(% colspan="3" style="width: 707px;" %)AT+CHE 972 -|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response** 973 -|(% style="width:160px" %)AT+CHE=?|(% style="width:198px" %)Get eight channels mode|(% style="width:349px" %)1((( 739 +|=(% colspan="3" %)AT+CHE 740 +|**Command Example**|**Function**|**Response** 741 +|AT+CHE=?|Get eight channels mode|1((( 974 974 902.3 902.5 902.7 902.9 903.1 903.3 903.5 903.7 975 975 976 976 OK 977 977 ))) 978 -| (% style="width:160px" %)AT+CHE=1|(% style="width:198px" %)Set eight channels mode|(% style="width:349px" %)OK746 +|AT+CHE=1|Set eight channels mode|OK 979 979 980 -{{info}} 981 -**Downlink Command: 0x24** 982 -{{/info}} 748 +Downlink Command: 0x24 983 983 984 984 Format: Command Code (0x24) followed by 1 bytes channel value. 985 985 986 986 If the downlink payload=2401, it means set channel mode to 1, while type code is 24. 987 987 988 -* **Example 1**: Downlink Payload: 2401 ~/~/ set channel mode to 1989 -* **Example 2**: Downlink Payload: 2405 ~/~/ set channel mode to 5754 +* Example 1: Downlink Payload: 2401 ~/~/ set channel mode to 1 755 +* Example 2: Downlink Payload: 2405 ~/~/ set channel mode to 5 990 990 991 991 == 7.20 Get or Set RXwindows1 timeout == 992 992 993 993 Feature:Get or Set the number of symbols to detect and timeout from RXwindow1(0 to 255). 994 994 995 -{{info}} 996 -**AT Command: AT+RX1WTO** 997 -{{/info}} 761 +AT Command: AT+RX1WTO 998 998 999 -(% border="1" style="background-color:#ffffcc; color:green; width:460.222px" %) 1000 -|=(% colspan="3" style="width: 457px;" %)AT+ RX1WTO 1001 -|(% style="width:163px" %)**Command Example**|(% style="width:201px" %)**Function**|(% style="width:93px" %)**Response** 1002 -|(% style="width:163px" %)AT+RX1WTO=?|(% style="width:201px" %)Get RXwindows1 timeout|(% style="width:93px" %)14((( 763 +|=(% colspan="3" %)AT+ RX1WTO 764 +|**Command Example**|**Function**|**Response** 765 +|AT+RX1WTO=?|Get RXwindows1 timeout|14((( 1003 1003 OK 1004 1004 ))) 1005 -| (% style="width:163px" %)AT+RX1WTO=60|(% style="width:201px" %)Set RXwindows1 timeout|(% style="width:93px" %)OK768 +|AT+RX1WTO=60|Set RXwindows1 timeout|OK 1006 1006 1007 -((( 1008 -**AT+RX1TWO** is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph. 1009 -))) 770 +AT+RX1TWO is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph. 1010 1010 1011 -[[image:image -20220526162535-1.png]]772 +[[~[~[image:https://wiki.dragino.com/images/thumb/5/51/RX1WTO.JPG/600px-RX1WTO.JPG~|~|alt="RX1WTO.JPG" height="239" width="600"~]~]>>url:https://wiki.dragino.com/index.php/File:RX1WTO.JPG]] 1012 1012 1013 -((( 1014 1014 Increasing thisvalue is equal to extending the time that the receiving window is opened, butthe corresponding power consumption will also increase. Properly increasingthis value can increase the success rate of the downlink. 1015 1015 1016 - 1017 -))) 1018 - 1019 1019 == 7.21 Get or Set RXwindows2 timeout == 1020 1020 1021 1021 Feature:Get or Set the number of symbols to detect and timeout from RXwindow2(0 to 255). 1022 1022 1023 -{{info}} 1024 -**AT Command: AT+RX2WTO** 1025 -{{/info}} 780 +AT Command: AT+RX2WTO 1026 1026 1027 -(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %) 1028 -|=(% colspan="3" style="width: 494px;" %)AT+ RX2WTO 1029 -|(% style="width:190px" %)**Command Example**|(% style="width:199px" %)**Function**|(% style="width:104px" %)**Response** 1030 -|(% style="width:190px" %)AT+RX2WTO=?|(% style="width:199px" %)Get RXwindows2 timeout|(% style="width:104px" %)7((( 782 +|=(% colspan="3" %)AT+ RX2WTO 783 +|**Command Example**|**Function**|**Response** 784 +|AT+RX2WTO=?|Get RXwindows2 timeout|7((( 1031 1031 OK 1032 1032 ))) 1033 -| (% style="width:190px" %)AT+RX2WTO=20|(% style="width:199px" %)Set RXwindows2 timeout|(% style="width:104px" %)OK787 +|AT+RX2WTO=20|Set RXwindows2 timeout|OK 1034 1034 1035 1035 == 7.22 Setting up uplinkdwelltime (as923, au915) == 1036 1036 1037 1037 Feature: Get or Set uplinkdwelltime 1038 1038 1039 -{{info}} 1040 -**AT Command: AT+DWELLT** 1041 -{{/info}} 793 +AT Command: AT+DWELLT 1042 1042 1043 -(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %) 1044 -|=(% colspan="3" style="width: 494px;" %)AT+DWELLT 1045 -|(% style="width:183px" %)**Command Example**|(% style="width:179px" %)**Function**|(% style="width:131px" %)**Response** 1046 -|(% style="width:183px" %)AT+DWELLT=?|(% style="width:179px" %)Get uplinkdwelltime|(% style="width:131px" %)1((( 795 +|=(% colspan="3" %)AT+DWELLT 796 +|**Command Example**|**Function**|**Response** 797 +|AT+DWELLT=?|Get uplinkdwelltime|1((( 1047 1047 OK 1048 1048 ))) 1049 -| (% style="width:183px" %)AT+DWELLT=0|(% style="width:179px" %)Set uplinkdwelltime|(% style="width:131px" %)OK800 +|AT+DWELLT=0|Set uplinkdwelltime|OK 1050 1050 1051 -{{info}} 1052 -**Downlink Command: 0x25** 1053 -{{/info}} 802 +Downlink Command: 0x25 1054 1054 1055 1055 Format: Command Code (0x25) followed by 1 bytes state value. 1056 1056 1057 1057 If the downlink payload=2501, it means set uplinkdwelltime to 1, while type code is 25. 1058 1058 1059 -* **Example 1**: Downlink Payload:**2501**~/~/ set uplinkdwelltime to 11060 -* **Example 2**: Downlink Payload:**2500**~/~/ set uplinkdwelltime to 0808 +* Example 1: Downlink Payload: 2501 ~/~/ set uplinkdwelltime to 1 809 +* Example 2: Downlink Payload: 2500 ~/~/ set uplinkdwelltime to 0 1061 1061 1062 1062 == 7.23 Set Packet Receiving Response Level == 1063 1063 ... ... @@ -1065,11 +1065,11 @@ 1065 1065 1066 1066 RPL value: 1067 1067 1068 -* **AT+RPL=0:**Device won't immediately reply any downlink commands from platform.1069 -* **AT+RPL=1:**Device will immediately reply message to Unconfirmed Data Down. Payload is 0x00.1070 -* **AT+RPL=2:**Device will immediately reply message to Confirmed Data Down. Payload is 0x00 and requied response header for this command.1071 -* **AT+RPL=3:**Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command.1072 -* **AT+RPL=4:**Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands.817 +* AT+RPL=0: Device won't immediately reply any downlink commands from platform. 818 +* AT+RPL=1: Device will immediately reply message to Unconfirmed Data Down. Payload is 0x00. 819 +* AT+RPL=2: Device will immediately reply message to Confirmed Data Down. Payload is 0x00 and requied response header for this command. 820 +* AT+RPL=3: Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command. 821 +* AT+RPL=4: Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands. 1073 1073 1074 1074 Case Analyes: 1075 1075 ... ... @@ -1077,44 +1077,37 @@ 1077 1077 * For Class C devices used in ChirpStack, need to set AT+RPL=4 because Chirpstack require immedietely reply message to MAC Command. 1078 1078 * For Class C devices used in TTI, need to set AT+RPL=4 because TTI require immediately reply message to Confirmed Data Down & MAC Command. 1079 1079 1080 -{{info}} 1081 -**AT Command: AT+RPL** 1082 -{{/info}} 829 +AT Command: AT+RPL 1083 1083 1084 -(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %) 1085 -|=(% colspan="3" style="width: 533px;" %)AT+RPL 1086 -|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response** 1087 -|(% style="width:160px" %)AT+RPL=?|(% style="width:263px" %)Get packet receiving response level|(% style="width:109px" %)1((( 831 +|=(% colspan="3" %)AT+RPL 832 +|**Command Example**|**Function**|**Response** 833 +|AT+RPL=?|Get packet receiving response level|1((( 1088 1088 OK 1089 1089 ))) 1090 -| (% style="width:160px" %)AT+RPL=0|(% style="width:263px" %)Set packet receiving response level|(% style="width:109px" %)OK836 +|AT+RPL=0|Set packet receiving response level|OK 1091 1091 1092 -{{info}} 1093 -**Downlink Command: 0x21** 1094 -{{/info}} 838 +Downlink Command: 0x21 1095 1095 1096 1096 Format: Command Code (0x21) followed by 1 bytes level value. 1097 1097 1098 1098 If the downlink payload=2101, it means set packet receiving response level to 1, while type code is 21. 1099 1099 1100 -* **Example 1**: Downlink Payload:**2101**~/~/ set packet receiving response level to 11101 -* **Example 2**: Downlink Payload:**2102**~/~/ set packet receiving response level to 2844 +* Example 1: Downlink Payload: 2101 ~/~/ set packet receiving response level to 1 845 +* Example 2: Downlink Payload: 2102 ~/~/ set packet receiving response level to 2 1102 1102 1103 1103 = 8. AT Commands Combination = 1104 1104 1105 1105 == 8.1 Set a fix RX2DR for downlink window == 1106 1106 1107 -* **AT+ADR=0**~-~-> Disable ADR first1108 -* **AT+RX2DR=xxxx**~-~-> Set xxxx to your wanted DataRate851 +* AT+ADR=0 ~-~-> Disable ADR first 852 +* AT+RX2DR=xxxx ~-~-> Set xxxx to your wanted DataRate 1109 1109 1110 1110 == 8.2 Use Downlink Command to set a fix uplink DR == 1111 1111 1112 -{{info}} 1113 -**Downlink Command: 0x22000500** 1114 -{{/info}} 856 +Downlink Command: 0x22000500 1115 1115 1116 1116 Same as: 1117 1117 1118 -* AT+ADR=0 ||anchor="H7.1AdaptiveDataRate"]]1119 -* AT+DR=5 ||anchor="H7.4DataRate"]]1120 -* AT+TXP=0 ||anchor="H7.14TransmitPower"]]860 +* AT+ADR=0 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Adaptive_Data_Rate]] 861 +* AT+DR=5 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Data_Rate]] 862 +* AT+TXP=0 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Transmit_Power]]
- image-20220511120050-1.png
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -XWiki.Xiaoling - Size
-
... ... @@ -1,1 +1,0 @@ 1 -136.3 KB - Content
- image-20220526162535-1.png
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -XWiki.Xiaoling - Size
-
... ... @@ -1,1 +1,0 @@ 1 -149.4 KB - Content