Last modified by kai on 2024/09/06 10:00
<
From version < 32.1 >
edited by Xiaoling
on 2022/05/27 18:01
To version < 50.6 >
edited by Xiaoling
on 2022/07/13 12:01
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,4 +1,4 @@
1 - **Contents：**
1 + **Table of** **Contents：**
2 2  
3 3  {{toc/}}
4 4  
... ... @@ -6,6 +6,7 @@
6 6  
7 7  = 1. Introduction =
8 8  
9 +
9 9  Dragino LoRaWAN End Node support two types of AT Commands and Downlink Commands:
10 10  
11 11  * **Common Commands:** They should be available for each sensor, such as: change uplink interval, reset device.
... ... @@ -18,14 +18,18 @@
18 18  
19 19  = 2. How to use AT Commands or Downlink command =
20 20  
22 +
21 21  * For AT Command , See Devices User Manual for Device. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
22 22  * For LoRaWAN Downlink: The gateway transfer downlink command in HEX format. This page shows the HEX format downlink code for each command. but some servers use base64 as downlink code. Below are reference for how to use downlink command:
23 -** Use HEX format to send a downlink: [[TTN v3>>doc:Main.Notes for TTN.WebHome]]
24 -** Use Base64 format to send a downlink: [[Chirpstack>>doc:Main.Notes for ChirpStack.WebHome]].
25 +** Use HEX format to send a downlink: [[TTN v3>>Notes for TTN]]
26 +** Use Base64 format to send a downlink: [[Chirpstack>>Notes for ChirpStack]]
25 25  ** See use note for more serves [[Servers Note>>doc:Main.WebHome]](IoT LoRaWAN Server)
26 26  
29 +
30 +
27 27  = 3. Support End Node and firmware version =
28 28  
33 +
29 29  (% border="1" style="background-color:#ffffcc; color:green; width:966px" %)
30 30  |=(% colspan="3" style="width: 963px;" %)(((
31 31  Dragino STM32 base hardware Firmware / LoRaWAN stack list
... ... @@ -97,16 +97,17 @@
97 97  )))
98 98  )))
99 99  
105 +
106 +
100 100  = 4. System Management Commands =
101 101  
109 +
102 102  == 4.1 Change Uplink Interval ==
103 103  
112 +
104 104  Feature: Change LoRaWAN End Node Transmit Interval.
105 105  
106 -(% class="box infomessage" %)
107 -(((
108 -**AT Command: AT+TDC**
109 -)))
115 +(% style="color:blue" %)**AT Command: AT+TDC**
110 110  
111 111  (% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
112 112  |=(% colspan="3" style="width: 724px;" %)AT+TDC
... ... @@ -120,11 +120,11 @@
120 120  Set transmit interval to 60000ms = 60 seconds
121 121  )))
122 122  
123 -{{info}}
124 -**Downlink Command: 0x01**
125 -{{/info}}
126 -
127 127  (((
130 +
131 +
132 +(% style="color:blue" %)**Downlink Command: 0x01**
133 +
128 128  Format: Command Code (0x01) followed by 3 bytes time value.
129 129  )))
130 130  
... ... @@ -135,14 +135,17 @@
135 135  * **Example 1**: Downlink Payload:** 0100001E** ~/~/ Set Transmit Interval (TDC) = 30 seconds
136 136  * **Example 2**: Downlink Payload:** 0100003C** ~/~/ Set Transmit Interval (TDC) = 60 seconds
137 137  
144 +
145 +
138 138  == 4.2 Reboot End Node ==
139 139  
148 +
140 140  Feature: Reboot End Node to perform a new OTAA or ABP Join.
141 141  
142 -{{info}}
143 -**AT Command: ATZ**
144 -{{/info}}
145 145  
152 +(% style="color:blue" %)**AT Command: ATZ**
153 +
154 +
146 146  (% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
147 147  |=(% colspan="3" %)ATZ: Trig a reset of the MCU
148 148  |**Command Example**|**Function**|**Response**
... ... @@ -160,10 +160,10 @@
160 160  <followed by the Tx and Rx information>
161 161  )))
162 162  
163 -{{info}}
164 -**Downlink Command: 0x04**
165 -{{/info}}
166 166  
173 +(% style="color:blue" %)**Downlink Command: 0x04**
174 +
175 +
167 167  (((
168 168  Format: Command Code (0x04) followed by FF.
169 169  )))
... ... @@ -176,11 +176,10 @@
176 176  
177 177  == 4.3 Reset to factory Default ==
178 178  
188 +
179 179  Feature: Reset the parameters to Factory Default, factory default value depends on the firmware settings, the OTAA and ABP keys will reserve after this command.
180 180  
181 -{{info}}
182 -**AT Command: AT+FDR**
183 -{{/info}}
191 +(% style="color:blue" %)**AT Command: AT+FDR**
184 184  
185 185  (% border="1" style="background-color:#ffffcc; color:green; width:831.222px" %)
186 186  |=(% colspan="3" style="width: 828px;" %)Reset to factory default
... ... @@ -199,10 +199,10 @@
199 199  Please set the parameters or reset Device to apply change
200 200  )))
201 201  
202 -{{info}}
203 -**Downlink Command: 0x04**
204 -{{/info}}
205 205  
211 +(% style="color:blue" %)**Downlink Command: 0x04**
212 +
213 +
206 206  (((
207 207  Format: Command Code (0x04) followed by FE.
208 208  )))
... ... @@ -216,10 +216,10 @@
216 216  
217 217  Feature: Show firmware version. No downlink command yet.
218 218  
219 -{{info}}
220 -**AT Command: AT+VER**
221 -{{/info}}
222 222  
228 +(% style="color:blue" %)**AT Command: AT+VER**
229 +
230 +
223 223  (% border="1" style="background-color:#ffffcc; color:green; width:586px" %)
224 224  |=(% colspan="3" style="width: 583px;" %)AT+VER: Image Version and Frequency Band
225 225  |(% style="width:170px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:113px" %)**Response**
... ... @@ -229,10 +229,10 @@
229 229  OK
230 230  )))
231 231  
232 -{{info}}
233 -**Downlink Command: 0x26 (Valid in 006 stack)**
234 -{{/info}}
235 235  
241 +(% style="color:blue" %)**Downlink Command: 0x26 (Valid in 006 stack)**
242 +
243 +
236 236  (((
237 237  Downlink Format: 0x26
238 238  )))
... ... @@ -275,10 +275,10 @@
275 275  
276 276  Feature: Show All configure. No downlink command yet.
277 277  
278 -{{info}}
279 -**AT Command: AT+CFG**
280 -{{/info}}
281 281  
287 +(% style="color:blue" %)**AT Command: AT+CFG**
288 +
289 +
282 282  (% border="1" style="background-color:#ffffcc; color:green; width:599.222px" %)
283 283  |=(% colspan="3" style="width: 596px;" %)AT+CFG: Print all configurations
284 284  |(% style="width:160px" %)**Command Example**|(% style="width:154px" %)**Function**|(% style="width:280px" %)**Response**
... ... @@ -302,10 +302,10 @@
302 302  
303 303  Feature: Get or Set the Application EUI.
304 304  
305 -{{info}}
306 -**AT Command: AT+APPEUI**
307 -{{/info}}
308 308  
314 +(% style="color:blue" %)**AT Command: AT+APPEUI**
315 +
316 +
309 309  (% border="1" style="background-color:#ffffcc; color:green; width:686.222px" %)
310 310  |=(% colspan="3" style="width: 683px;" %)AT+APPEUI
311 311  |(% style="width:305px" %)**Command Example**|(% style="width:186px" %)**Function**|(% style="width:191px" %)**Response**
... ... @@ -318,10 +318,10 @@
318 318  
319 319  Feature: Get or Set the Application Key.
320 320  
321 -{{info}}
322 -**AT Command: AT+APPKEY**
323 -{{/info}}
324 324  
330 +(% style="color:blue" %)**AT Command: AT+APPKEY**
331 +
332 +
325 325  (% border="1" style="background-color:#ffffcc; color:green; width:976.222px" %)
326 326  |=(% colspan="3" style="width: 973px;" %)AT+APPKEY
327 327  |(% style="width:441px" %)**Command Example**|(% style="width:180px" %)**Function**|(% style="width:350px" %)**Response**
... ... @@ -334,10 +334,10 @@
334 334  
335 335  Feature: Get or Set the Application Session Key.
336 336  
337 -{{info}}
338 -**AT Command: AT+APPSKEY**
339 -{{/info}}
340 340  
346 +(% style="color:blue" %)**AT Command: AT+APPSKEY**
347 +
348 +
341 341  (% border="1" style="background-color:#ffffcc; color:green; width:1040.22px" %)
342 342  |=(% colspan="3" style="width: 1037px;" %)AT+APPSKEY
343 343  |(% style="width:451px" %)**Command Example**|(% style="width:231px" %)**Function**|(% style="width:354px" %)**Response**
... ... @@ -352,10 +352,10 @@
352 352  
353 353  Feature: Get or Set the Device Address.
354 354  
355 -{{info}}
356 -**AT Command: AT+DADDR**
357 -{{/info}}
358 358  
364 +(% style="color:blue" %)**AT Command: AT+DADDR**
365 +
366 +
359 359  (% border="1" style="background-color:#ffffcc; color:green; width:795.222px" %)
360 360  |=(% colspan="3" style="width: 792px;" %)AT+DADDR
361 361  |(% style="width:192px" %)**Command Example**|(% style="width:241px" %)**Function**|(% style="width:359px" %)**Response**
... ... @@ -370,10 +370,10 @@
370 370  
371 371  Feature: Get or Set the Device EUI.
372 372  
373 -{{info}}
374 -**AT Command: AT+DEUI**
375 -{{/info}}
376 376  
382 +(% style="color:blue" %)**AT Command: AT+DEUI**
383 +
384 +
377 377  (% border="1" style="background-color:#ffffcc; color:green; width:1035.22px" %)
378 378  |=(% colspan="3" style="width: 1032px;" %)AT+DEUI
379 379  |(% style="width:250px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:634px" %)**Response**
... ... @@ -388,10 +388,10 @@
388 388  
389 389  Feature: Get or Set the Network ID.(You can enter this command change only after successful network connection)
390 390  
391 -{{info}}
392 -**AT Command: AT+NWKID**
393 -{{/info}}
394 394  
400 +(% style="color:blue" %)**AT Command: AT+NWKID**
401 +
402 +
395 395  (% border="1" style="background-color:#ffffcc; color:green; width:448.222px" %)
396 396  |=(% colspan="3" style="width: 445px;" %)AT+NWKID
397 397  |(% style="width:191px" %)**Command Example**|(% style="width:153px" %)**Function**|(% style="width:101px" %)**Response**
... ... @@ -404,10 +404,10 @@
404 404  
405 405  Feature: Get or Set the Network Session Key
406 406  
407 -{{info}}
408 -**AT Command: AT+NWKSKEY**
409 -{{/info}}
410 410  
416 +(% style="color:blue" %)**AT Command: AT+NWKSKEY**
417 +
418 +
411 411  (% border="1" style="background-color:#ffffcc; color:green; width:1017.22px" %)
412 412  |=(% colspan="3" style="width: 1014px;" %)AT+NWKSKEY
413 413  |(% style="width:455px" %)**Command Example**|(% style="width:215px" %)**Function**|(% style="width:343px" %)**Response**
... ... @@ -416,17 +416,18 @@
416 416  )))
417 417  |(% style="width:455px" %)AT+NWKSKEY=A8 40 41 FF FF 12 34 56 00 01 02 04 05 06 06 07|(% style="width:215px" %)Set the Network Session Key.|(% style="width:343px" %)OK
418 418  
419 -
420 420  = 6. Joining and sending date on LoRaWAN network =
421 421  
422 422  == 6.1 Confirm Mode ==
423 423  
431 +=== AT+CFM command before DR-LWS007 software stack ===
432 +
424 424  Feature: Get or Set the confirmation mode (0-1).
425 425  
426 -{{info}}
427 -**AT Command: AT+CFM**
428 -{{/info}}
429 429  
436 +(% style="color:blue" %)**AT Command: AT+CFM**
437 +
438 +
430 430  (% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
431 431  |=(% colspan="3" style="width: 707px;" %)AT+CFM
432 432  |(% style="width:155px" %)**Command Example**|(% style="width:205px" %)**Function**|(% style="width:346px" %)**Response**
... ... @@ -436,7 +436,7 @@
436 436  |(% style="width:155px" %)AT+CFM=1|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)OK
437 437  |(% style="width:155px" %)AT+CFM=2|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)While Error in format, return AT_PARAM_ERROR
438 438  
439 -Downlink Command: 0x05
448 +(% style="color:blue" %)**Downlink Command: 0x05**
440 440  
441 441  Format: Command Code (0x05) followed by 2 bytes mode value.
442 442  
... ... @@ -445,16 +445,62 @@
445 445  * Example 1: Downlink Payload: 0501 ~/~/ Set AT+CFM=1
446 446  * Example 2: Downlink Payload: 0500 ~/~/ Set AT+CFM=0
447 447  
457 +=== AT+CFM command since DR-LWS007 software stack ===
448 448  
449 449  
460 +(% style="color:blue" %)**AT Command: AT+CFM**
461 +
462 +
463 +(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
464 +|=(% colspan="3" style="width: 707px;" %)AT+CFM
465 +|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
466 +|(% style="width:160px" %)(((
467 +AT+CFM=1,0,0
468 +
469 +value1
470 +)))|(% style="width:198px" %)confirmed uplink|(% style="width:349px" %)(((
471 +1
472 +
473 +OK
474 +)))
475 +|(% style="width:160px" %)(((
476 +AT+CFM=0,?,0
477 +
478 +value2
479 +)))|(% style="width:198px" %)set max retry , range: 0 ~~ 7|(% style="width:349px" %)(((
480 +0~~7
481 +
482 +OK
483 +)))
484 +|(% style="width:160px" %)(((
485 +AT+CFM=0,0,1
486 +
487 +value3
488 +)))|(% style="width:198px" %)uplink fcnt increase by 1 for each retry|(% style="width:349px" %)(((
489 +1
490 +
491 +OK
492 +)))
493 +
494 +
495 +(% style="color:blue" %)**Downlink Command: 0x05**
496 +
497 +
498 +Format: Command Code (0x05) followed by 2 bytes mode value.
499 +
500 +If the downlink payload=05010101, it means set end node to use confirm mode, while type code is 05.
501 +
502 +* Example 1: Downlink Payload: 05010101 ~/~/ Set AT+CFM=1,1,1
503 +* Example 2: Downlink Payload: 05000700 ~/~/ Set AT+CFM=0,7,0
504 +
450 450  == 6.2 Confirm Status ==
451 451  
452 452  Feature: Get confirmation status of the last AT+SEND (0-1).
453 453  
454 -{{info}}
455 -**AT Command: AT+CFS**
456 -{{/info}}
457 457  
510 +(% style="color:blue" %)**AT Command: AT+CFS**
511 +
512 +
458 458  (% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
459 459  |=(% colspan="3" style="width: 531px;" %)AT+CFS
460 460  |(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:178px" %)**Response**
... ... @@ -462,16 +462,14 @@
462 462  OK
463 463  )))
464 464  
465 -
466 -
467 467  == 6.3 Join LoRa® Network ==
468 468  
469 469  Feature: Join network.
470 470  
471 -{{info}}
472 -**AT Command: AT+JOIN**
473 -{{/info}}
474 474  
525 +(% style="color:blue" %)**AT Command: AT+JOIN**
526 +
527 +
475 475  (% border="1" style="background-color:#ffffcc; color:green; width:647.222px" %)
476 476  |=(% colspan="3" style="width: 644px;" %)AT+JOIN
477 477  |(% style="width:163px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:334px" %)**Response**
... ... @@ -481,16 +481,14 @@
481 481  While Error in format, return AT_BUSY_ERROR
482 482  )))
483 483  
484 -
485 -
486 486  == 6.4 LoRa® Network Join Mode ==
487 487  
488 488  Feature: Get or Set the Network Join Mode. (0: ABP, 1: OTAA).
489 489  
490 -{{info}}
491 -**AT Command: AT+NJM**
492 -{{/info}}
493 493  
542 +(% style="color:blue" %)**AT Command: AT+NJM**
543 +
544 +
494 494  (% border="1" style="background-color:#ffffcc; color:green; width:753.222px" %)
495 495  |=(% colspan="3" style="width: 750px;" %)AT+NJM
496 496  |(% style="width:162px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:361px" %)**Response**
... ... @@ -500,27 +500,25 @@
500 500  |(% style="width:162px" %)AT+NJM=0|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)OK
501 501  |(% style="width:162px" %)AT+NJM=2|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)While Error in format, return AT_PARAM_ERROR
502 502  
503 -{{info}}
504 -**Downlink Command: 0x20**
505 -{{/info}}
506 506  
555 +(% style="color:blue" %)**Downlink Command: 0x20**
556 +
557 +
507 507  Format: Command Code (0x20) followed by 1 bytes mode value.
508 508  
509 509  If the downlink payload=2000, it means set the Network Join Mode, while type code is 20.
510 510  
511 -* **Example 1: **Downlink Payload: **2000** ~/~/ Set AT+NJM=O
562 +* **Example 1: **Downlink Payload: **2000** ~/~/ Set AT+NJM=0
512 512  * **Example 2:** Downlink Payload: **2001** ~/~/ Set AT+NJM=1
513 513  
514 -
515 -
516 516  == 6.5 LoRa® Network Join Status ==
517 517  
518 518  Feature: LoRa® Network Join Status.
519 519  
520 -{{info}}
521 -**AT Command: AT+NJS**
522 -{{/info}}
523 523  
570 +(% style="color:blue" %)**AT Command: AT+NJS**
571 +
572 +
524 524  (% border="1" style="background-color:#ffffcc; color:green; width:498.222px" %)
525 525  |=(% colspan="3" style="width: 495px;" %)AT+NJS
526 526  |(% style="width:169px" %)**Command Example**|(% style="width:164px" %)**Function**|(% style="width:161px" %)**Response**
... ... @@ -528,16 +528,14 @@
528 528  OK
529 529  )))
530 530  
531 -
532 -
533 533  == 6.6 Print Last Received Data in Raw Format ==
534 534  
535 535  Feature: Print Last Received Data in Raw Format<port:data>.
536 536  
537 -{{info}}
538 -**AT Command: AT+RECV**
539 -{{/info}}
540 540  
585 +(% style="color:blue" %)**AT Command: AT+RECV**
586 +
587 +
541 541  (% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
542 542  |=(% colspan="3" style="width: 584px;" %)AT+RECV
543 543  |(% style="width:161px" %)**Command Example**|(% style="width:272px" %)**Function**|(% style="width:150px" %)**Response**
... ... @@ -545,16 +545,14 @@
545 545  OK
546 546  )))
547 547  
548 -
549 -
550 550  == 6.7 Print Last Received Data in Binary Format ==
551 551  
552 552  Feature: Print Last Received Data in Binary Format<port:data>.
553 553  
554 -{{info}}
555 -**AT Command: AT+RECVB**
556 -{{/info}}
557 557  
600 +(% style="color:blue" %)**AT Command: AT+RECVB**
601 +
602 +
558 558  (% border="1" style="background-color:#ffffcc; color:green; width:793.222px" %)
559 559  |=(% colspan="3" style="width: 790px;" %)AT+RECVB
560 560  |(% style="width:173px" %)**Command Example**|(% style="width:497px" %)**Function**|(% style="width:120px" %)**Response**
... ... @@ -562,16 +562,14 @@
562 562  OK
563 563  )))
564 564  
565 -
566 -
567 567  == 6.8 Send Text Data ==
568 568  
569 569  Feature: Send Text Data<port:data>.
570 570  
571 -{{info}}
572 -**AT Command: AT+SEND**
573 -{{/info}}
574 574  
615 +(% style="color:blue" %)**AT Command: AT+SEND**
616 +
617 +
575 575  (% border="1" style="background-color:#ffffcc; color:green; width:991.222px" %)
576 576  |=(% colspan="3" style="width: 988px;" %)AT+SEND
577 577  |(% style="width:201px" %)**Command Example**|(% style="width:340px" %)**Function**|(% style="width:446px" %)**Response**
... ... @@ -583,16 +583,14 @@
583 583  
584 584  )))
585 585  
586 -
587 -
588 588  == 6.9 Send Hexadecimal Data ==
589 589  
590 590  Feature: Send hexadecimal data along with the application port.
591 591  
592 -{{info}}
593 -**AT Command: AT+SENDB**
594 -{{/info}}
595 595  
634 +(% style="color:blue" %)**AT Command: AT+SENDB**
635 +
636 +
596 596  (% border="1" style="background-color:#ffffcc; color:green; width:1120.22px" %)
597 597  |=(% colspan="3" style="width: 1117px;" %)AT+SENDB
598 598  |(% style="width:257px" %)**Command Example**|(% style="width:406px" %)**Function**|(% style="width:453px" %)**Response**
... ... @@ -609,10 +609,10 @@
609 609  
610 610  Feature: Get or Set the Adaptive Data Rate setting. (0: off, 1: on).
611 611  
612 -{{info}}
613 -**AT Command: AT+ADR**
614 -{{/info}}
615 615  
654 +(% style="color:blue" %)**AT Command: AT+ADR**
655 +
656 +
616 616  (% border="1" style="background-color:#ffffcc; color:green; width:683.222px" %)
617 617  |=(% colspan="3" style="width: 680px;" %)AT+ADR
618 618  |(% style="width:162px" %)**Command Example**|(% style="width:266px" %)**Function**|(% style="width:250px" %)**Response**
... ... @@ -624,11 +624,11 @@
624 624  AT_PARAM_ERROR
625 625  )))
626 626  
627 -{{info}}
628 -**Downlink Command: 0x22**
629 -{{/info}}
630 630  
669 +(% style="color:blue" %)**Downlink Command: 0x22**
631 631  
671 +
672 +
632 632  If the downlink payload=2201, it means setting the adaptive data rate to 1, while type code is 22.
633 633  
634 634  * **Example 1**: Downlink Payload: **2201** ~/~/ Set AT+ADR=1.
... ... @@ -638,10 +638,10 @@
638 638  
639 639  Feature: Get or Set the Device Class(Currently only support class A, class C).
640 640  
641 -{{info}}
642 -**AT Command:AT+CLASS**
643 -{{/info}}
644 644  
683 +(% style="color:blue" %)**AT Command:AT+CLASS**
684 +
685 +
645 645  (% border="1" style="background-color:#ffffcc; color:green; width:507.222px" %)
646 646  |=(% colspan="3" style="width: 504px;" %)AT+CLASS
647 647  |(% style="width:163px" %)**Command Example**|(% style="width:166px" %)**Function**|(% style="width:175px" %)**Response**
... ... @@ -656,10 +656,10 @@
656 656  
657 657  Feature: Get or Set the ETSI Duty Cycle setting - 0=disable, 1=enable - Only for testing.
658 658  
659 -{{info}}
660 -**AT Command:AT+DCS**
661 -{{/info}}
662 662  
701 +(% style="color:blue" %)**AT Command:AT+DCS**
702 +
703 +
663 663  (% border="1" style="background-color:#ffffcc; color:green; width:515.222px" %)
664 664  |=(% colspan="3" style="width: 512px;" %)AT+DCS
665 665  |(% style="width:165px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:107px" %)**Response**
... ... @@ -674,10 +674,10 @@
674 674  
675 675  Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) . Note: while set Data Rate, please use set Adptive Data Rate, ADR=0 first. otherwise device will response to server's ADR command and change the DR to the setting from server
676 676  
677 -{{info}}
678 -**AT Command: AT+DR**
679 -{{/info}}
680 680  
719 +(% style="color:blue" %)**AT Command: AT+DR**
720 +
721 +
681 681  (% border="1" style="background-color:#ffffcc; color:green; width:466.222px" %)
682 682  |=(% colspan="3" style="width: 463px;" %)AT+DR
683 683  |(% style="width:156px" %)**Command Example**|(% style="width:167px" %)**Function**|(% style="width:140px" %)**Response**
... ... @@ -688,11 +688,11 @@
688 688  
689 689  )))
690 690  
691 -{{info}}
692 -**Downlink Command: 0x2200aaFF**
693 -{{/info}}
694 694  
733 +(% style="color:blue" %)**Downlink Command: 0x2200aaFF**
695 695  
735 +
736 +
696 696  If the downlink payload=220001FF, it means setting the data rate to 1, while type code is 22 00 aa FF.
697 697  
698 698  * **Example 1**: Downlink Payload: **220001FF** ~/~/ Set AT+DR=1.
... ... @@ -702,10 +702,10 @@
702 702  
703 703  Feature: Get or Set the Frame Counter Downlink.
704 704  
705 -{{info}}
706 -**AT Command:AT+FCD**
707 -{{/info}}
708 708  
747 +(% style="color:blue" %)**AT Command:AT+FCD**
748 +
749 +
709 709  (% border="1" style="background-color:#ffffcc; color:green; width:693.222px" %)
710 710  |=(% colspan="3" style="width: 690px;" %)AT+FCD
711 711  |(% style="width:162px" %)**Command Example**|(% style="width:258px" %)**Function**|(% style="width:269px" %)**Response**
... ... @@ -722,10 +722,10 @@
722 722  
723 723  Feature: Get or Set the Frame Counter Uplink.
724 724  
725 -{{info}}
726 -**AT Command:AT+FCU**
727 -{{/info}}
728 728  
767 +(% style="color:blue" %)**AT Command:AT+FCU**
768 +
769 +
729 729  (% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
730 730  |=(% colspan="3" style="width: 531px;" %)AT+FCU
731 731  |(% style="width:177px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:113px" %)**Response**
... ... @@ -740,10 +740,10 @@
740 740  
741 741  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 1 in ms.
742 742  
743 -{{info}}
744 -**AT Command:AT+JN1DL**
745 -{{/info}}
746 746  
785 +(% style="color:blue" %)**AT Command:AT+JN1DL**
786 +
787 +
747 747  (% border="1" style="background-color:#ffffcc; color:green; width:537.222px" %)
748 748  |=(% colspan="3" style="width: 534px;" %)AT+JN1DL
749 749  |(% style="width:164px" %)**Command Example**|(% style="width:229px" %)**Function**|(% style="width:140px" %)**Response**
... ... @@ -758,10 +758,10 @@
758 758  
759 759  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 2 in ms.
760 760  
761 -{{info}}
762 -**AT Command:AT+JN2DL**
763 -{{/info}}
764 764  
803 +(% style="color:blue" %)**AT Command:AT+JN2DL**
804 +
805 +
765 765  (% border="1" style="background-color:#ffffcc; color:green; width:538.222px" %)
766 766  |=(% colspan="3" style="width: 535px;" %)AT+JN2DL
767 767  |(% style="width:160px" %)**Command Example**|(% style="width:228px" %)**Function**|(% style="width:146px" %)**Response**
... ... @@ -774,12 +774,14 @@
774 774  
775 775  == 7.9 Public Network Mode ==
776 776  
777 -Feature: Get or Set the public network mode. (0: off, 1: on)
818 +Feature: Get or Set the public network mode. (0: off, 1: on). A Public LoRaWAN network use 0x34 as syncword. Default Settings; PNM=1
778 778  
779 -{{info}}
780 -**AT Command:AT+PNM**
781 -{{/info}}
820 +Notice: If user build their own LoRaWAN server but still use syncword=0x34, this is still considered a public LoRaWAN network
782 782  
822 +
823 +(% style="color:blue" %)**AT Command:AT+PNM**
824 +
825 +
783 783  (% border="1" style="background-color:#ffffcc; color:green; width:667.222px" %)
784 784  |=(% colspan="3" style="width: 664px;" %)AT+PNM
785 785  |(% style="width:166px" %)**Command Example**|(% style="width:225px" %)**Function**|(% style="width:272px" %)**Response**
... ... @@ -786,20 +786,25 @@
786 786  |(% style="width:166px" %)AT+PNM=?|(% style="width:225px" %)Get the public network mode.|(% style="width:272px" %)1(((
787 787  OK
788 788  )))
789 -|(% style="width:166px" %)AT+PNM=1|(% style="width:225px" %)Set the public network mode.|(% style="width:272px" %)(System will write new value to PNM)(((
832 +|(% style="width:166px" %)AT+PNM=1|(% style="width:225px" %)(((
833 +Set the public network mode.
834 +
835 +Set syncword=0x34
836 +)))|(% style="width:272px" %)(System will write new value to PNM)(((
790 790  OK
791 791  
792 792  
793 793  )))
841 +|(% style="width:166px" %)AT+PNM=0|(% style="width:225px" %)Set to use private network autoset syncword=0x12|(% style="width:272px" %)
794 794  
795 795  == 7.10 Receive Delay1 ==
796 796  
797 797  Feature: Get or Set the delay between the end of the Tx and the Rx Window 1 in ms
798 798  
799 -{{info}}
800 -**AT Command:AT+RX1DL**
801 -{{/info}}
802 802  
848 +(% style="color:blue" %)**AT Command:AT+RX1DL**
849 +
850 +
803 803  (% border="1" style="background-color:#ffffcc; color:green; width:408.222px" %)
804 804  |=(% colspan="3" style="width: 405px;" %)AT+RX1DL
805 805  |(% style="width:155px" %)**Command Example**|(% style="width:128px" %)**Function**|(% style="width:122px" %)**Response**
... ... @@ -814,10 +814,10 @@
814 814  
815 815  Feature: Get or Set the delay between the end of the Tx and the Rx Window 2 in ms
816 816  
817 -{{info}}
818 -**AT Command:AT+RX2DL**
819 -{{/info}}
820 820  
866 +(% style="color:blue" %)**AT Command:AT+RX2DL**
867 +
868 +
821 821  (% border="1" style="background-color:#ffffcc; color:green; width:481.222px" %)
822 822  |=(% colspan="3" style="width: 478px;" %)AT+RX2DL
823 823  |(% style="width:175px" %)**Command Example**|(% style="width:152px" %)**Function**|(% style="width:150px" %)**Response**
... ... @@ -832,10 +832,10 @@
832 832  
833 833  Feature: Get or Set the Rx2 window data rate (0-7 corresponding to DR_X)
834 834  
835 -{{info}}
836 -**AT Command:AT+RX2DR**
837 -{{/info}}
838 838  
884 +(% style="color:blue" %)**AT Command:AT+RX2DR**
885 +
886 +
839 839  (% border="1" style="background-color:#ffffcc; color:green; width:525.222px" %)
840 840  |=(% colspan="3" style="width: 522px;" %)AT+RX2DR
841 841  |(% style="width:160px" %)**Command Example**|(% style="width:232px" %)**Function**|(% style="width:130px" %)**Response**
... ... @@ -850,10 +850,10 @@
850 850  
851 851  Feature: Get or Set the Rx2 window frequency
852 852  
853 -{{info}}
854 -**AT Command:AT+RX2FQ**
855 -{{/info}}
856 856  
902 +(% style="color:blue" %)**AT Command:AT+RX2FQ**
903 +
904 +
857 857  (% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
858 858  |=(% colspan="3" style="width: 584px;" %)AT+RX2FQ
859 859  |(% style="width:183px" %)**Command Example**|(% style="width:240px" %)**Function**|(% style="width:160px" %)**Response**
... ... @@ -868,10 +868,10 @@
868 868  
869 869  Feature: Get or Set the Transmit Power(0-5, MAX:0, MIN:5, according to LoRaWAN Spec, or 40=10dB, 41 = 11dB, …, 50 = 20dB which is out of LoRaWAN spec. )
870 870  
871 -{{info}}
872 -**AT Command:AT+TXP**
873 -{{/info}}
874 874  
920 +(% style="color:blue" %)**AT Command:AT+TXP**
921 +
922 +
875 875  (% border="1" style="background-color:#ffffcc; color:green; width:465.222px" %)
876 876  |=(% colspan="3" style="width: 462px;" %)AT+TXP
877 877  |(% style="width:161px" %)**Command Example**|(% style="width:189px" %)**Function**|(% style="width:112px" %)**Response**
... ... @@ -893,10 +893,10 @@
893 893  
894 894  Feature: Get or Set the Rx2 window frequency
895 895  
896 -{{info}}
897 -**AT Command:AT+RSSI**
898 -{{/info}}
899 899  
945 +(% style="color:blue" %)**AT Command:AT+RSSI**
946 +
947 +
900 900  (% border="1" style="background-color:#ffffcc; color:green; width:557.222px" %)
901 901  |=(% colspan="3" style="width: 554px;" %)AT+RSSI
902 902  |(% style="width:164px" %)**Command Example**|(% style="width:289px" %)**Function**|(% style="width:100px" %)**Response**
... ... @@ -908,10 +908,10 @@
908 908  
909 909  Feature: Get the SNR of the last received packet
910 910  
911 -{{info}}
912 -**AT Command:AT+SNR**
913 -{{/info}}
914 914  
960 +(% style="color:blue" %)**AT Command:AT+SNR**
961 +
962 +
915 915  (% border="1" style="background-color:#ffffcc; color:green; width:571.222px" %)
916 916  |=(% colspan="3" style="width: 568px;" %)AT+SNR
917 917  |(% style="width:164px" %)**Command Example**|(% style="width:290px" %)**Function**|(% style="width:113px" %)**Response**
... ... @@ -923,10 +923,10 @@
923 923  
924 924  Feature: Get or set the application port.
925 925  
926 -{{info}}
927 -**AT Command: AT+PORT**
928 -{{/info}}
929 929  
975 +(% style="color:blue" %)**AT Command: AT+PORT**
976 +
977 +
930 930  (% border="1" style="background-color:#ffffcc; color:green; width:500.222px" %)
931 931  |=(% colspan="3" style="width: 497px;" %)AT+PORT
932 932  |(% style="width:157px" %)**Command Example**|(% style="width:204px" %)**Function**|(% style="width:135px" %)**Response**
... ... @@ -1103,6 +1103,129 @@
1103 1103  * **Example 1**: Downlink Payload: **2101** ~/~/ set packet receiving response level to 1
1104 1104  * **Example 2**: Downlink Payload: **2102** ~/~/ set packet receiving response level to 2
1105 1105  
1154 +== 7.24 Controls NBTrans in unconfirmed uplink mode（LWS007 NBTrans:Set retransmission packets) ==
1155 +
1156 +{{info}}
1157 +**AT Command: AT+SETMAXNBTRANS **
1158 +{{/info}}
1159 +
1160 +(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1161 +|=(% colspan="3" style="width: 533px;" %)AT+**SETMAXNBTRANS**
1162 +|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1163 +|(% style="width:160px" %)**AT+SETMAXNBTRANS=1，0**|(% style="width:263px" %)Value1: set the maximum NBTrans.|(% style="width:109px" %)1(((
1164 +OK
1165 +)))
1166 +|(% style="width:160px" %)**AT+SETMAXNBTRANS=？，1**|(% style="width:263px" %)value2: 0: uplink fcnt doesn't change for each NBTrans; 1: uplink fcnt increase by 1 for each NBTrans.|(% style="width:109px" %)(((
1167 +1
1168 +
1169 +OK
1170 +)))
1171 +
1172 +{{info}}
1173 +**Downlink Command: 0x33**
1174 +{{/info}}
1175 +
1176 +Format: Command Code (0x33) followed by 2 bytes mode value.
1177 +
1178 +If the downlink payload=330100, it means set end node to use confirm mode, while type code is 33.
1179 +
1180 +* Example 1: Downlink Payload: 330100 ~/~/ Set AT+SETMAXNBTRANS=1,0
1181 +* Example 2: Downlink Payload: 330201 ~/~/ Set AT+SETMAXNBTRANS=2,1
1182 +
1183 +== 7.25 Device offline rejoining （LWS007) ==
1184 +
1185 +{{info}}
1186 +**AT Command: AT+DDETECT**
1187 +{{/info}}
1188 +
1189 +(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
1190 +|=(% colspan="3" style="width: 707px;" %)AT+**DDETECT**
1191 +|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
1192 +|(% style="width:160px" %)(((
1193 +AT+DDETECT=1,1440,2880
1194 +
1195 +value1
1196 +)))|(% style="width:198px" %)Enable online detect|(% style="width:349px" %)(((
1197 +1
1198 +
1199 +OK
1200 +)))
1201 +|(% style="width:160px" %)(((
1202 +AT+DDETECT=1,?,2880
1203 +
1204 +value2
1205 +)))|(% style="width:198px" %)Online detection packet sending time|(% style="width:349px" %)(((
1206 +
1207 +
1208 +OK
1209 +)))
1210 +|(% style="width:160px" %)(((
1211 +AT+DDETECT=1,1440,？
1212 +
1213 +value3
1214 +)))|(% style="width:198px" %)Process rejoin|(% style="width:349px" %)(((
1215 +
1216 +
1217 +OK
1218 +)))
1219 +
1220 +{{info}}
1221 +**Downlink Command: 0x33**
1222 +{{/info}}
1223 +
1224 +Format: Command Code (0x32) followed by 2 bytes mode value.
1225 +
1226 +If the downlink payload=320105A00B40, it means set end node to use confirm mode, while type code is 33.
1227 +
1228 +* Example 1: Downlink Payload: 320105A00B40 ~/~/ Set AT+DDETECT=1,1440,2880
1229 +
1230 +== 7.26 Request the server to send an ACK ==
1231 +
1232 +{{info}}
1233 +**AT Command: AT+PNACKMD**
1234 +{{/info}}
1235 +
1236 +(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1237 +|=(% colspan="3" style="width: 533px;" %)**AT+PNACKMD**
1238 +|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1239 +|(% style="width:160px" %)**AT+PNACKMD=1**|(% style="width:263px" %)If the node uploads the ACK as confirm, it will request the server to send an ACK. If the server ack is not received, the node will upload the packets that have not received the ACK the next time it receives the ACK|(% style="width:109px" %)1(((
1240 +OK
1241 +)))
1242 +|(% style="width:160px" %)**AT+PNACKMD=0**|(% style="width:263px" %)off request the server to send an ACK|(% style="width:109px" %)(((
1243 +0
1244 +
1245 +OK
1246 +)))
1247 +
1248 +== 7.27 Adjust network rejoining interval ==
1249 +
1250 +{{info}}
1251 +**AT Command: AT+RJTDC**
1252 +{{/info}}
1253 +
1254 +(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
1255 +|=(% colspan="3" style="width: 724px;" %)AT+RJTDC
1256 +|(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
1257 +|(% style="width:165px" %)AT+RJTDC=?|(% style="width:227px" %)Show the ReJoin data transmission interval in min|(% style="width:329px" %)30000(((
1258 +OK
1259 +
1260 +the interval is 30000ms = 30s
1261 +)))
1262 +|(% style="width:165px" %)AT+RJTDC=60000|(% style="width:227px" %)Set the ReJoin data transmission interval in min|(% style="width:329px" %)OK(((
1263 +Set the ReJoin data transmission interval to 60000ms = 60 seconds
1264 +)))
1265 +
1266 +{{info}}
1267 +**Downlink Command: 0x26**
1268 +{{/info}}
1269 +
1270 +Format: Command Code (0x26) followed by 2 bytes mode value.
1271 +
1272 +If the downlink payload=26000A, it means set end node to use confirm mode, while type code is 26.
1273 +
1274 +* Example 1: Downlink Payload: 26000A ~/~/ Set AT+RJTDC=10
1275 +* Example 2: Downlink Payload: 260002 ~/~/ Set AT+RJTDC=2
1276 +
1106 1106  = 8. AT Commands Combination =
1107 1107  
1108 1108  == 8.1 Set a fix RX2DR for downlink window ==
... ... @@ -1121,3 +1121,4 @@
1121 1121  * AT+ADR=0  [[Reference>>||anchor="H7.1AdaptiveDataRate"]]
1122 1122  * AT+DR=5  [[Reference>>||anchor="H7.4DataRate"]]
1123 1123  * AT+TXP=0  [[Reference>>||anchor="H7.14TransmitPower"]]
1295 +~)~)~)

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0