Last modified by kai on 2024/09/06 10:00
<
From version < 31.1 >
edited by Xiaoling
on 2022/05/27 18:00
To version < 50.5 >
edited by Xiaoling
on 2022/07/13 12:01
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,4 +1,4 @@
1 - **Contents：**
1 + **Table of** **Contents：**
2 2  
3 3  {{toc/}}
4 4  
... ... @@ -6,6 +6,7 @@
6 6  
7 7  = 1. Introduction =
8 8  
9 +
9 9  Dragino LoRaWAN End Node support two types of AT Commands and Downlink Commands:
10 10  
11 11  * **Common Commands:** They should be available for each sensor, such as: change uplink interval, reset device.
... ... @@ -18,14 +18,18 @@
18 18  
19 19  = 2. How to use AT Commands or Downlink command =
20 20  
22 +
21 21  * For AT Command , See Devices User Manual for Device. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
22 22  * For LoRaWAN Downlink: The gateway transfer downlink command in HEX format. This page shows the HEX format downlink code for each command. but some servers use base64 as downlink code. Below are reference for how to use downlink command:
23 -** Use HEX format to send a downlink: [[TTN v3>>doc:Main.Notes for TTN.WebHome]]
24 -** Use Base64 format to send a downlink: [[Chirpstack>>doc:Main.Notes for ChirpStack.WebHome]].
25 +** Use HEX format to send a downlink: [[TTN v3>>Notes for TTN]]
26 +** Use Base64 format to send a downlink: [[Chirpstack>>Notes for ChirpStack]]
25 25  ** See use note for more serves [[Servers Note>>doc:Main.WebHome]](IoT LoRaWAN Server)
26 26  
29 +
30 +
27 27  = 3. Support End Node and firmware version =
28 28  
33 +
29 29  (% border="1" style="background-color:#ffffcc; color:green; width:966px" %)
30 30  |=(% colspan="3" style="width: 963px;" %)(((
31 31  Dragino STM32 base hardware Firmware / LoRaWAN stack list
... ... @@ -97,16 +97,17 @@
97 97  )))
98 98  )))
99 99  
105 +
106 +
100 100  = 4. System Management Commands =
101 101  
109 +
102 102  == 4.1 Change Uplink Interval ==
103 103  
112 +
104 104  Feature: Change LoRaWAN End Node Transmit Interval.
105 105  
106 -(% class="box infomessage" %)
107 -(((
108 -**AT Command: AT+TDC**
109 -)))
115 +(% style="color:blue" %)**AT Command: AT+TDC**
110 110  
111 111  (% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
112 112  |=(% colspan="3" style="width: 724px;" %)AT+TDC
... ... @@ -120,11 +120,11 @@
120 120  Set transmit interval to 60000ms = 60 seconds
121 121  )))
122 122  
123 -{{info}}
124 -**Downlink Command: 0x01**
125 -{{/info}}
126 -
127 127  (((
130 +
131 +
132 +(% style="color:blue" %)**Downlink Command: 0x01**
133 +
128 128  Format: Command Code (0x01) followed by 3 bytes time value.
129 129  )))
130 130  
... ... @@ -135,14 +135,17 @@
135 135  * **Example 1**: Downlink Payload:** 0100001E** ~/~/ Set Transmit Interval (TDC) = 30 seconds
136 136  * **Example 2**: Downlink Payload:** 0100003C** ~/~/ Set Transmit Interval (TDC) = 60 seconds
137 137  
144 +
145 +
138 138  == 4.2 Reboot End Node ==
139 139  
148 +
140 140  Feature: Reboot End Node to perform a new OTAA or ABP Join.
141 141  
142 -{{info}}
143 -**AT Command: ATZ**
144 -{{/info}}
145 145  
152 +(% style="color:blue" %)**AT Command: ATZ**
153 +
154 +
146 146  (% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
147 147  |=(% colspan="3" %)ATZ: Trig a reset of the MCU
148 148  |**Command Example**|**Function**|**Response**
... ... @@ -160,10 +160,10 @@
160 160  <followed by the Tx and Rx information>
161 161  )))
162 162  
163 -{{info}}
164 -**Downlink Command: 0x04**
165 -{{/info}}
166 166  
173 +(% style="color:blue" %)**Downlink Command: 0x04**
174 +
175 +
167 167  (((
168 168  Format: Command Code (0x04) followed by FF.
169 169  )))
... ... @@ -176,11 +176,10 @@
176 176  
177 177  == 4.3 Reset to factory Default ==
178 178  
188 +
179 179  Feature: Reset the parameters to Factory Default, factory default value depends on the firmware settings, the OTAA and ABP keys will reserve after this command.
180 180  
181 -{{info}}
182 -**AT Command: AT+FDR**
183 -{{/info}}
191 +(% style="color:blue" %)**AT Command: AT+FDR**
184 184  
185 185  (% border="1" style="background-color:#ffffcc; color:green; width:831.222px" %)
186 186  |=(% colspan="3" style="width: 828px;" %)Reset to factory default
... ... @@ -199,10 +199,10 @@
199 199  Please set the parameters or reset Device to apply change
200 200  )))
201 201  
202 -{{info}}
203 -**Downlink Command: 0x04**
204 -{{/info}}
205 205  
211 +(% style="color:blue" %)**Downlink Command: 0x04**
212 +
213 +
206 206  (((
207 207  Format: Command Code (0x04) followed by FE.
208 208  )))
... ... @@ -216,10 +216,10 @@
216 216  
217 217  Feature: Show firmware version. No downlink command yet.
218 218  
219 -{{info}}
220 -**AT Command: AT+VER**
221 -{{/info}}
222 222  
228 +(% style="color:blue" %)**AT Command: AT+VER**
229 +
230 +
223 223  (% border="1" style="background-color:#ffffcc; color:green; width:586px" %)
224 224  |=(% colspan="3" style="width: 583px;" %)AT+VER: Image Version and Frequency Band
225 225  |(% style="width:170px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:113px" %)**Response**
... ... @@ -229,10 +229,10 @@
229 229  OK
230 230  )))
231 231  
232 -{{info}}
233 -**Downlink Command: 0x26 (Valid in 006 stack)**
234 -{{/info}}
235 235  
241 +(% style="color:blue" %)**Downlink Command: 0x26 (Valid in 006 stack)**
242 +
243 +
236 236  (((
237 237  Downlink Format: 0x26
238 238  )))
... ... @@ -275,10 +275,10 @@
275 275  
276 276  Feature: Show All configure. No downlink command yet.
277 277  
278 -{{info}}
279 -**AT Command: AT+CFG**
280 -{{/info}}
281 281  
287 +(% style="color:blue" %)**AT Command: AT+CFG**
288 +
289 +
282 282  (% border="1" style="background-color:#ffffcc; color:green; width:599.222px" %)
283 283  |=(% colspan="3" style="width: 596px;" %)AT+CFG: Print all configurations
284 284  |(% style="width:160px" %)**Command Example**|(% style="width:154px" %)**Function**|(% style="width:280px" %)**Response**
... ... @@ -302,10 +302,10 @@
302 302  
303 303  Feature: Get or Set the Application EUI.
304 304  
305 -{{info}}
306 -**AT Command: AT+APPEUI**
307 -{{/info}}
308 308  
314 +(% style="color:blue" %)**AT Command: AT+APPEUI**
315 +
316 +
309 309  (% border="1" style="background-color:#ffffcc; color:green; width:686.222px" %)
310 310  |=(% colspan="3" style="width: 683px;" %)AT+APPEUI
311 311  |(% style="width:305px" %)**Command Example**|(% style="width:186px" %)**Function**|(% style="width:191px" %)**Response**
... ... @@ -318,10 +318,10 @@
318 318  
319 319  Feature: Get or Set the Application Key.
320 320  
321 -{{info}}
322 -**AT Command: AT+APPKEY**
323 -{{/info}}
324 324  
330 +(% style="color:blue" %)**AT Command: AT+APPKEY**
331 +
332 +
325 325  (% border="1" style="background-color:#ffffcc; color:green; width:976.222px" %)
326 326  |=(% colspan="3" style="width: 973px;" %)AT+APPKEY
327 327  |(% style="width:441px" %)**Command Example**|(% style="width:180px" %)**Function**|(% style="width:350px" %)**Response**
... ... @@ -334,10 +334,10 @@
334 334  
335 335  Feature: Get or Set the Application Session Key.
336 336  
337 -{{info}}
338 -**AT Command: AT+APPSKEY**
339 -{{/info}}
340 340  
346 +(% style="color:blue" %)**AT Command: AT+APPSKEY**
347 +
348 +
341 341  (% border="1" style="background-color:#ffffcc; color:green; width:1040.22px" %)
342 342  |=(% colspan="3" style="width: 1037px;" %)AT+APPSKEY
343 343  |(% style="width:451px" %)**Command Example**|(% style="width:231px" %)**Function**|(% style="width:354px" %)**Response**
... ... @@ -352,10 +352,10 @@
352 352  
353 353  Feature: Get or Set the Device Address.
354 354  
355 -{{info}}
356 -**AT Command: AT+DADDR**
357 -{{/info}}
358 358  
364 +(% style="color:blue" %)**AT Command: AT+DADDR**
365 +
366 +
359 359  (% border="1" style="background-color:#ffffcc; color:green; width:795.222px" %)
360 360  |=(% colspan="3" style="width: 792px;" %)AT+DADDR
361 361  |(% style="width:192px" %)**Command Example**|(% style="width:241px" %)**Function**|(% style="width:359px" %)**Response**
... ... @@ -370,10 +370,10 @@
370 370  
371 371  Feature: Get or Set the Device EUI.
372 372  
373 -{{info}}
374 -**AT Command: AT+DEUI**
375 -{{/info}}
376 376  
382 +(% style="color:blue" %)**AT Command: AT+DEUI**
383 +
384 +
377 377  (% border="1" style="background-color:#ffffcc; color:green; width:1035.22px" %)
378 378  |=(% colspan="3" style="width: 1032px;" %)AT+DEUI
379 379  |(% style="width:250px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:634px" %)**Response**
... ... @@ -384,15 +384,14 @@
384 384  OK
385 385  )))
386 386  
387 -
388 388  == 5.6 Network ID ==
389 389  
390 390  Feature: Get or Set the Network ID.(You can enter this command change only after successful network connection)
391 391  
392 -{{info}}
393 -**AT Command: AT+NWKID**
394 -{{/info}}
395 395  
400 +(% style="color:blue" %)**AT Command: AT+NWKID**
401 +
402 +
396 396  (% border="1" style="background-color:#ffffcc; color:green; width:448.222px" %)
397 397  |=(% colspan="3" style="width: 445px;" %)AT+NWKID
398 398  |(% style="width:191px" %)**Command Example**|(% style="width:153px" %)**Function**|(% style="width:101px" %)**Response**
... ... @@ -401,15 +401,14 @@
401 401  )))
402 402  |(% style="width:191px" %)AT+NWKID=A8 40 41 FF|(% style="width:153px" %)Set the Network ID.|(% style="width:101px" %)OK
403 403  
404 -
405 405  == 5.7 Network Session Key ==
406 406  
407 407  Feature: Get or Set the Network Session Key
408 408  
409 -{{info}}
410 -**AT Command: AT+NWKSKEY**
411 -{{/info}}
412 412  
416 +(% style="color:blue" %)**AT Command: AT+NWKSKEY**
417 +
418 +
413 413  (% border="1" style="background-color:#ffffcc; color:green; width:1017.22px" %)
414 414  |=(% colspan="3" style="width: 1014px;" %)AT+NWKSKEY
415 415  |(% style="width:455px" %)**Command Example**|(% style="width:215px" %)**Function**|(% style="width:343px" %)**Response**
... ... @@ -418,18 +418,18 @@
418 418  )))
419 419  |(% style="width:455px" %)AT+NWKSKEY=A8 40 41 FF FF 12 34 56 00 01 02 04 05 06 06 07|(% style="width:215px" %)Set the Network Session Key.|(% style="width:343px" %)OK
420 420  
421 -
422 -
423 423  = 6. Joining and sending date on LoRaWAN network =
424 424  
425 425  == 6.1 Confirm Mode ==
426 426  
431 +=== AT+CFM command before DR-LWS007 software stack ===
432 +
427 427  Feature: Get or Set the confirmation mode (0-1).
428 428  
429 -{{info}}
430 -**AT Command: AT+CFM**
431 -{{/info}}
432 432  
436 +(% style="color:blue" %)**AT Command: AT+CFM**
437 +
438 +
433 433  (% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
434 434  |=(% colspan="3" style="width: 707px;" %)AT+CFM
435 435  |(% style="width:155px" %)**Command Example**|(% style="width:205px" %)**Function**|(% style="width:346px" %)**Response**
... ... @@ -439,7 +439,7 @@
439 439  |(% style="width:155px" %)AT+CFM=1|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)OK
440 440  |(% style="width:155px" %)AT+CFM=2|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)While Error in format, return AT_PARAM_ERROR
441 441  
442 -Downlink Command: 0x05
448 +(% style="color:blue" %)**Downlink Command: 0x05**
443 443  
444 444  Format: Command Code (0x05) followed by 2 bytes mode value.
445 445  
... ... @@ -448,14 +448,62 @@
448 448  * Example 1: Downlink Payload: 0501 ~/~/ Set AT+CFM=1
449 449  * Example 2: Downlink Payload: 0500 ~/~/ Set AT+CFM=0
450 450  
457 +=== AT+CFM command since DR-LWS007 software stack ===
458 +
459 +
460 +(% style="color:blue" %)**AT Command: AT+CFM**
461 +
462 +
463 +(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
464 +|=(% colspan="3" style="width: 707px;" %)AT+CFM
465 +|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
466 +|(% style="width:160px" %)(((
467 +AT+CFM=1,0,0
468 +
469 +value1
470 +)))|(% style="width:198px" %)confirmed uplink|(% style="width:349px" %)(((
471 +1
472 +
473 +OK
474 +)))
475 +|(% style="width:160px" %)(((
476 +AT+CFM=0,?,0
477 +
478 +value2
479 +)))|(% style="width:198px" %)set max retry , range: 0 ~~ 7|(% style="width:349px" %)(((
480 +0~~7
481 +
482 +OK
483 +)))
484 +|(% style="width:160px" %)(((
485 +AT+CFM=0,0,1
486 +
487 +value3
488 +)))|(% style="width:198px" %)uplink fcnt increase by 1 for each retry|(% style="width:349px" %)(((
489 +1
490 +
491 +OK
492 +)))
493 +
494 +
495 +(% style="color:blue" %)**Downlink Command: 0x05**
496 +
497 +
498 +Format: Command Code (0x05) followed by 2 bytes mode value.
499 +
500 +If the downlink payload=05010101, it means set end node to use confirm mode, while type code is 05.
501 +
502 +* Example 1: Downlink Payload: 05010101 ~/~/ Set AT+CFM=1,1,1
503 +* Example 2: Downlink Payload: 05000700 ~/~/ Set AT+CFM=0,7,0
504 +
451 451  == 6.2 Confirm Status ==
452 452  
453 453  Feature: Get confirmation status of the last AT+SEND (0-1).
454 454  
455 -{{info}}
456 -**AT Command: AT+CFS**
457 -{{/info}}
458 458  
510 +(% style="color:blue" %)**AT Command: AT+CFS**
511 +
512 +
459 459  (% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
460 460  |=(% colspan="3" style="width: 531px;" %)AT+CFS
461 461  |(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:178px" %)**Response**
... ... @@ -467,10 +467,10 @@
467 467  
468 468  Feature: Join network.
469 469  
470 -{{info}}
471 -**AT Command: AT+JOIN**
472 -{{/info}}
473 473  
525 +(% style="color:blue" %)**AT Command: AT+JOIN**
526 +
527 +
474 474  (% border="1" style="background-color:#ffffcc; color:green; width:647.222px" %)
475 475  |=(% colspan="3" style="width: 644px;" %)AT+JOIN
476 476  |(% style="width:163px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:334px" %)**Response**
... ... @@ -484,10 +484,10 @@
484 484  
485 485  Feature: Get or Set the Network Join Mode. (0: ABP, 1: OTAA).
486 486  
487 -{{info}}
488 -**AT Command: AT+NJM**
489 -{{/info}}
490 490  
542 +(% style="color:blue" %)**AT Command: AT+NJM**
543 +
544 +
491 491  (% border="1" style="background-color:#ffffcc; color:green; width:753.222px" %)
492 492  |=(% colspan="3" style="width: 750px;" %)AT+NJM
493 493  |(% style="width:162px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:361px" %)**Response**
... ... @@ -497,15 +497,15 @@
497 497  |(% style="width:162px" %)AT+NJM=0|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)OK
498 498  |(% style="width:162px" %)AT+NJM=2|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)While Error in format, return AT_PARAM_ERROR
499 499  
500 -{{info}}
501 -**Downlink Command: 0x20**
502 -{{/info}}
503 503  
555 +(% style="color:blue" %)**Downlink Command: 0x20**
556 +
557 +
504 504  Format: Command Code (0x20) followed by 1 bytes mode value.
505 505  
506 506  If the downlink payload=2000, it means set the Network Join Mode, while type code is 20.
507 507  
508 -* **Example 1: **Downlink Payload: **2000** ~/~/ Set AT+NJM=O
562 +* **Example 1: **Downlink Payload: **2000** ~/~/ Set AT+NJM=0
509 509  * **Example 2:** Downlink Payload: **2001** ~/~/ Set AT+NJM=1
510 510  
511 511  == 6.5 LoRa® Network Join Status ==
... ... @@ -512,10 +512,10 @@
512 512  
513 513  Feature: LoRa® Network Join Status.
514 514  
515 -{{info}}
516 -**AT Command: AT+NJS**
517 -{{/info}}
518 518  
570 +(% style="color:blue" %)**AT Command: AT+NJS**
571 +
572 +
519 519  (% border="1" style="background-color:#ffffcc; color:green; width:498.222px" %)
520 520  |=(% colspan="3" style="width: 495px;" %)AT+NJS
521 521  |(% style="width:169px" %)**Command Example**|(% style="width:164px" %)**Function**|(% style="width:161px" %)**Response**
... ... @@ -527,10 +527,10 @@
527 527  
528 528  Feature: Print Last Received Data in Raw Format<port:data>.
529 529  
530 -{{info}}
531 -**AT Command: AT+RECV**
532 -{{/info}}
533 533  
585 +(% style="color:blue" %)**AT Command: AT+RECV**
586 +
587 +
534 534  (% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
535 535  |=(% colspan="3" style="width: 584px;" %)AT+RECV
536 536  |(% style="width:161px" %)**Command Example**|(% style="width:272px" %)**Function**|(% style="width:150px" %)**Response**
... ... @@ -542,10 +542,10 @@
542 542  
543 543  Feature: Print Last Received Data in Binary Format<port:data>.
544 544  
545 -{{info}}
546 -**AT Command: AT+RECVB**
547 -{{/info}}
548 548  
600 +(% style="color:blue" %)**AT Command: AT+RECVB**
601 +
602 +
549 549  (% border="1" style="background-color:#ffffcc; color:green; width:793.222px" %)
550 550  |=(% colspan="3" style="width: 790px;" %)AT+RECVB
551 551  |(% style="width:173px" %)**Command Example**|(% style="width:497px" %)**Function**|(% style="width:120px" %)**Response**
... ... @@ -557,10 +557,10 @@
557 557  
558 558  Feature: Send Text Data<port:data>.
559 559  
560 -{{info}}
561 -**AT Command: AT+SEND**
562 -{{/info}}
563 563  
615 +(% style="color:blue" %)**AT Command: AT+SEND**
616 +
617 +
564 564  (% border="1" style="background-color:#ffffcc; color:green; width:991.222px" %)
565 565  |=(% colspan="3" style="width: 988px;" %)AT+SEND
566 566  |(% style="width:201px" %)**Command Example**|(% style="width:340px" %)**Function**|(% style="width:446px" %)**Response**
... ... @@ -576,10 +576,10 @@
576 576  
577 577  Feature: Send hexadecimal data along with the application port.
578 578  
579 -{{info}}
580 -**AT Command: AT+SENDB**
581 -{{/info}}
582 582  
634 +(% style="color:blue" %)**AT Command: AT+SENDB**
635 +
636 +
583 583  (% border="1" style="background-color:#ffffcc; color:green; width:1120.22px" %)
584 584  |=(% colspan="3" style="width: 1117px;" %)AT+SENDB
585 585  |(% style="width:257px" %)**Command Example**|(% style="width:406px" %)**Function**|(% style="width:453px" %)**Response**
... ... @@ -596,10 +596,10 @@
596 596  
597 597  Feature: Get or Set the Adaptive Data Rate setting. (0: off, 1: on).
598 598  
599 -{{info}}
600 -**AT Command: AT+ADR**
601 -{{/info}}
602 602  
654 +(% style="color:blue" %)**AT Command: AT+ADR**
655 +
656 +
603 603  (% border="1" style="background-color:#ffffcc; color:green; width:683.222px" %)
604 604  |=(% colspan="3" style="width: 680px;" %)AT+ADR
605 605  |(% style="width:162px" %)**Command Example**|(% style="width:266px" %)**Function**|(% style="width:250px" %)**Response**
... ... @@ -611,11 +611,11 @@
611 611  AT_PARAM_ERROR
612 612  )))
613 613  
614 -{{info}}
615 -**Downlink Command: 0x22**
616 -{{/info}}
617 617  
669 +(% style="color:blue" %)**Downlink Command: 0x22**
618 618  
671 +
672 +
619 619  If the downlink payload=2201, it means setting the adaptive data rate to 1, while type code is 22.
620 620  
621 621  * **Example 1**: Downlink Payload: **2201** ~/~/ Set AT+ADR=1.
... ... @@ -625,10 +625,10 @@
625 625  
626 626  Feature: Get or Set the Device Class(Currently only support class A, class C).
627 627  
628 -{{info}}
629 -**AT Command:AT+CLASS**
630 -{{/info}}
631 631  
683 +(% style="color:blue" %)**AT Command:AT+CLASS**
684 +
685 +
632 632  (% border="1" style="background-color:#ffffcc; color:green; width:507.222px" %)
633 633  |=(% colspan="3" style="width: 504px;" %)AT+CLASS
634 634  |(% style="width:163px" %)**Command Example**|(% style="width:166px" %)**Function**|(% style="width:175px" %)**Response**
... ... @@ -643,10 +643,10 @@
643 643  
644 644  Feature: Get or Set the ETSI Duty Cycle setting - 0=disable, 1=enable - Only for testing.
645 645  
646 -{{info}}
647 -**AT Command:AT+DCS**
648 -{{/info}}
649 649  
701 +(% style="color:blue" %)**AT Command:AT+DCS**
702 +
703 +
650 650  (% border="1" style="background-color:#ffffcc; color:green; width:515.222px" %)
651 651  |=(% colspan="3" style="width: 512px;" %)AT+DCS
652 652  |(% style="width:165px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:107px" %)**Response**
... ... @@ -661,10 +661,10 @@
661 661  
662 662  Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) . Note: while set Data Rate, please use set Adptive Data Rate, ADR=0 first. otherwise device will response to server's ADR command and change the DR to the setting from server
663 663  
664 -{{info}}
665 -**AT Command: AT+DR**
666 -{{/info}}
667 667  
719 +(% style="color:blue" %)**AT Command: AT+DR**
720 +
721 +
668 668  (% border="1" style="background-color:#ffffcc; color:green; width:466.222px" %)
669 669  |=(% colspan="3" style="width: 463px;" %)AT+DR
670 670  |(% style="width:156px" %)**Command Example**|(% style="width:167px" %)**Function**|(% style="width:140px" %)**Response**
... ... @@ -675,11 +675,11 @@
675 675  
676 676  )))
677 677  
678 -{{info}}
679 -**Downlink Command: 0x2200aaFF**
680 -{{/info}}
681 681  
733 +(% style="color:blue" %)**Downlink Command: 0x2200aaFF**
682 682  
735 +
736 +
683 683  If the downlink payload=220001FF, it means setting the data rate to 1, while type code is 22 00 aa FF.
684 684  
685 685  * **Example 1**: Downlink Payload: **220001FF** ~/~/ Set AT+DR=1.
... ... @@ -689,10 +689,10 @@
689 689  
690 690  Feature: Get or Set the Frame Counter Downlink.
691 691  
692 -{{info}}
693 -**AT Command:AT+FCD**
694 -{{/info}}
695 695  
747 +(% style="color:blue" %)**AT Command:AT+FCD**
748 +
749 +
696 696  (% border="1" style="background-color:#ffffcc; color:green; width:693.222px" %)
697 697  |=(% colspan="3" style="width: 690px;" %)AT+FCD
698 698  |(% style="width:162px" %)**Command Example**|(% style="width:258px" %)**Function**|(% style="width:269px" %)**Response**
... ... @@ -709,10 +709,10 @@
709 709  
710 710  Feature: Get or Set the Frame Counter Uplink.
711 711  
712 -{{info}}
713 -**AT Command:AT+FCU**
714 -{{/info}}
715 715  
767 +(% style="color:blue" %)**AT Command:AT+FCU**
768 +
769 +
716 716  (% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
717 717  |=(% colspan="3" style="width: 531px;" %)AT+FCU
718 718  |(% style="width:177px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:113px" %)**Response**
... ... @@ -727,10 +727,10 @@
727 727  
728 728  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 1 in ms.
729 729  
730 -{{info}}
731 -**AT Command:AT+JN1DL**
732 -{{/info}}
733 733  
785 +(% style="color:blue" %)**AT Command:AT+JN1DL**
786 +
787 +
734 734  (% border="1" style="background-color:#ffffcc; color:green; width:537.222px" %)
735 735  |=(% colspan="3" style="width: 534px;" %)AT+JN1DL
736 736  |(% style="width:164px" %)**Command Example**|(% style="width:229px" %)**Function**|(% style="width:140px" %)**Response**
... ... @@ -745,10 +745,10 @@
745 745  
746 746  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 2 in ms.
747 747  
748 -{{info}}
749 -**AT Command:AT+JN2DL**
750 -{{/info}}
751 751  
803 +(% style="color:blue" %)**AT Command:AT+JN2DL**
804 +
805 +
752 752  (% border="1" style="background-color:#ffffcc; color:green; width:538.222px" %)
753 753  |=(% colspan="3" style="width: 535px;" %)AT+JN2DL
754 754  |(% style="width:160px" %)**Command Example**|(% style="width:228px" %)**Function**|(% style="width:146px" %)**Response**
... ... @@ -761,12 +761,14 @@
761 761  
762 762  == 7.9 Public Network Mode ==
763 763  
764 -Feature: Get or Set the public network mode. (0: off, 1: on)
818 +Feature: Get or Set the public network mode. (0: off, 1: on). A Public LoRaWAN network use 0x34 as syncword. Default Settings; PNM=1
765 765  
766 -{{info}}
767 -**AT Command:AT+PNM**
768 -{{/info}}
820 +Notice: If user build their own LoRaWAN server but still use syncword=0x34, this is still considered a public LoRaWAN network
769 769  
822 +
823 +(% style="color:blue" %)**AT Command:AT+PNM**
824 +
825 +
770 770  (% border="1" style="background-color:#ffffcc; color:green; width:667.222px" %)
771 771  |=(% colspan="3" style="width: 664px;" %)AT+PNM
772 772  |(% style="width:166px" %)**Command Example**|(% style="width:225px" %)**Function**|(% style="width:272px" %)**Response**
... ... @@ -773,20 +773,25 @@
773 773  |(% style="width:166px" %)AT+PNM=?|(% style="width:225px" %)Get the public network mode.|(% style="width:272px" %)1(((
774 774  OK
775 775  )))
776 -|(% style="width:166px" %)AT+PNM=1|(% style="width:225px" %)Set the public network mode.|(% style="width:272px" %)(System will write new value to PNM)(((
832 +|(% style="width:166px" %)AT+PNM=1|(% style="width:225px" %)(((
833 +Set the public network mode.
834 +
835 +Set syncword=0x34
836 +)))|(% style="width:272px" %)(System will write new value to PNM)(((
777 777  OK
778 778  
779 779  
780 780  )))
841 +|(% style="width:166px" %)AT+PNM=0|(% style="width:225px" %)Set to use private network autoset syncword=0x12|(% style="width:272px" %)
781 781  
782 782  == 7.10 Receive Delay1 ==
783 783  
784 784  Feature: Get or Set the delay between the end of the Tx and the Rx Window 1 in ms
785 785  
786 -{{info}}
787 -**AT Command:AT+RX1DL**
788 -{{/info}}
789 789  
848 +(% style="color:blue" %)**AT Command:AT+RX1DL**
849 +
850 +
790 790  (% border="1" style="background-color:#ffffcc; color:green; width:408.222px" %)
791 791  |=(% colspan="3" style="width: 405px;" %)AT+RX1DL
792 792  |(% style="width:155px" %)**Command Example**|(% style="width:128px" %)**Function**|(% style="width:122px" %)**Response**
... ... @@ -801,10 +801,10 @@
801 801  
802 802  Feature: Get or Set the delay between the end of the Tx and the Rx Window 2 in ms
803 803  
804 -{{info}}
805 -**AT Command:AT+RX2DL**
806 -{{/info}}
807 807  
866 +(% style="color:blue" %)**AT Command:AT+RX2DL**
867 +
868 +
808 808  (% border="1" style="background-color:#ffffcc; color:green; width:481.222px" %)
809 809  |=(% colspan="3" style="width: 478px;" %)AT+RX2DL
810 810  |(% style="width:175px" %)**Command Example**|(% style="width:152px" %)**Function**|(% style="width:150px" %)**Response**
... ... @@ -819,10 +819,10 @@
819 819  
820 820  Feature: Get or Set the Rx2 window data rate (0-7 corresponding to DR_X)
821 821  
822 -{{info}}
823 -**AT Command:AT+RX2DR**
824 -{{/info}}
825 825  
884 +(% style="color:blue" %)**AT Command:AT+RX2DR**
885 +
886 +
826 826  (% border="1" style="background-color:#ffffcc; color:green; width:525.222px" %)
827 827  |=(% colspan="3" style="width: 522px;" %)AT+RX2DR
828 828  |(% style="width:160px" %)**Command Example**|(% style="width:232px" %)**Function**|(% style="width:130px" %)**Response**
... ... @@ -837,10 +837,10 @@
837 837  
838 838  Feature: Get or Set the Rx2 window frequency
839 839  
840 -{{info}}
841 -**AT Command:AT+RX2FQ**
842 -{{/info}}
843 843  
902 +(% style="color:blue" %)**AT Command:AT+RX2FQ**
903 +
904 +
844 844  (% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
845 845  |=(% colspan="3" style="width: 584px;" %)AT+RX2FQ
846 846  |(% style="width:183px" %)**Command Example**|(% style="width:240px" %)**Function**|(% style="width:160px" %)**Response**
... ... @@ -855,10 +855,10 @@
855 855  
856 856  Feature: Get or Set the Transmit Power(0-5, MAX:0, MIN:5, according to LoRaWAN Spec, or 40=10dB, 41 = 11dB, …, 50 = 20dB which is out of LoRaWAN spec. )
857 857  
858 -{{info}}
859 -**AT Command:AT+TXP**
860 -{{/info}}
861 861  
920 +(% style="color:blue" %)**AT Command:AT+TXP**
921 +
922 +
862 862  (% border="1" style="background-color:#ffffcc; color:green; width:465.222px" %)
863 863  |=(% colspan="3" style="width: 462px;" %)AT+TXP
864 864  |(% style="width:161px" %)**Command Example**|(% style="width:189px" %)**Function**|(% style="width:112px" %)**Response**
... ... @@ -880,10 +880,10 @@
880 880  
881 881  Feature: Get or Set the Rx2 window frequency
882 882  
883 -{{info}}
884 -**AT Command:AT+RSSI**
885 -{{/info}}
886 886  
945 +(% style="color:blue" %)**AT Command:AT+RSSI**
946 +
947 +
887 887  (% border="1" style="background-color:#ffffcc; color:green; width:557.222px" %)
888 888  |=(% colspan="3" style="width: 554px;" %)AT+RSSI
889 889  |(% style="width:164px" %)**Command Example**|(% style="width:289px" %)**Function**|(% style="width:100px" %)**Response**
... ... @@ -1090,6 +1090,129 @@
1090 1090  * **Example 1**: Downlink Payload: **2101** ~/~/ set packet receiving response level to 1
1091 1091  * **Example 2**: Downlink Payload: **2102** ~/~/ set packet receiving response level to 2
1092 1092  
1154 +== 7.24 Controls NBTrans in unconfirmed uplink mode（LWS007 NBTrans:Set retransmission packets) ==
1155 +
1156 +{{info}}
1157 +**AT Command: AT+SETMAXNBTRANS **
1158 +{{/info}}
1159 +
1160 +(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1161 +|=(% colspan="3" style="width: 533px;" %)AT+**SETMAXNBTRANS**
1162 +|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1163 +|(% style="width:160px" %)**AT+SETMAXNBTRANS=1，0**|(% style="width:263px" %)Value1: set the maximum NBTrans.|(% style="width:109px" %)1(((
1164 +OK
1165 +)))
1166 +|(% style="width:160px" %)**AT+SETMAXNBTRANS=？，1**|(% style="width:263px" %)value2: 0: uplink fcnt doesn't change for each NBTrans; 1: uplink fcnt increase by 1 for each NBTrans.|(% style="width:109px" %)(((
1167 +1
1168 +
1169 +OK
1170 +)))
1171 +
1172 +{{info}}
1173 +**Downlink Command: 0x33**
1174 +{{/info}}
1175 +
1176 +Format: Command Code (0x33) followed by 2 bytes mode value.
1177 +
1178 +If the downlink payload=330100, it means set end node to use confirm mode, while type code is 33.
1179 +
1180 +* Example 1: Downlink Payload: 330100 ~/~/ Set AT+SETMAXNBTRANS=1,0
1181 +* Example 2: Downlink Payload: 330201 ~/~/ Set AT+SETMAXNBTRANS=2,1
1182 +
1183 +== 7.25 Device offline rejoining （LWS007) ==
1184 +
1185 +{{info}}
1186 +**AT Command: AT+DDETECT**
1187 +{{/info}}
1188 +
1189 +(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
1190 +|=(% colspan="3" style="width: 707px;" %)AT+**DDETECT**
1191 +|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
1192 +|(% style="width:160px" %)(((
1193 +AT+DDETECT=1,1440,2880
1194 +
1195 +value1
1196 +)))|(% style="width:198px" %)Enable online detect|(% style="width:349px" %)(((
1197 +1
1198 +
1199 +OK
1200 +)))
1201 +|(% style="width:160px" %)(((
1202 +AT+DDETECT=1,?,2880
1203 +
1204 +value2
1205 +)))|(% style="width:198px" %)Online detection packet sending time|(% style="width:349px" %)(((
1206 +
1207 +
1208 +OK
1209 +)))
1210 +|(% style="width:160px" %)(((
1211 +AT+DDETECT=1,1440,？
1212 +
1213 +value3
1214 +)))|(% style="width:198px" %)Process rejoin|(% style="width:349px" %)(((
1215 +
1216 +
1217 +OK
1218 +)))
1219 +
1220 +{{info}}
1221 +**Downlink Command: 0x33**
1222 +{{/info}}
1223 +
1224 +Format: Command Code (0x32) followed by 2 bytes mode value.
1225 +
1226 +If the downlink payload=320105A00B40, it means set end node to use confirm mode, while type code is 33.
1227 +
1228 +* Example 1: Downlink Payload: 320105A00B40 ~/~/ Set AT+DDETECT=1,1440,2880
1229 +
1230 +== 7.26 Request the server to send an ACK ==
1231 +
1232 +{{info}}
1233 +**AT Command: AT+PNACKMD**
1234 +{{/info}}
1235 +
1236 +(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1237 +|=(% colspan="3" style="width: 533px;" %)**AT+PNACKMD**
1238 +|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1239 +|(% style="width:160px" %)**AT+PNACKMD=1**|(% style="width:263px" %)If the node uploads the ACK as confirm, it will request the server to send an ACK. If the server ack is not received, the node will upload the packets that have not received the ACK the next time it receives the ACK|(% style="width:109px" %)1(((
1240 +OK
1241 +)))
1242 +|(% style="width:160px" %)**AT+PNACKMD=0**|(% style="width:263px" %)off request the server to send an ACK|(% style="width:109px" %)(((
1243 +0
1244 +
1245 +OK
1246 +)))
1247 +
1248 +== 7.27 Adjust network rejoining interval ==
1249 +
1250 +{{info}}
1251 +**AT Command: AT+RJTDC**
1252 +{{/info}}
1253 +
1254 +(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
1255 +|=(% colspan="3" style="width: 724px;" %)AT+RJTDC
1256 +|(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
1257 +|(% style="width:165px" %)AT+RJTDC=?|(% style="width:227px" %)Show the ReJoin data transmission interval in min|(% style="width:329px" %)30000(((
1258 +OK
1259 +
1260 +the interval is 30000ms = 30s
1261 +)))
1262 +|(% style="width:165px" %)AT+RJTDC=60000|(% style="width:227px" %)Set the ReJoin data transmission interval in min|(% style="width:329px" %)OK(((
1263 +Set the ReJoin data transmission interval to 60000ms = 60 seconds
1264 +)))
1265 +
1266 +{{info}}
1267 +**Downlink Command: 0x26**
1268 +{{/info}}
1269 +
1270 +Format: Command Code (0x26) followed by 2 bytes mode value.
1271 +
1272 +If the downlink payload=26000A, it means set end node to use confirm mode, while type code is 26.
1273 +
1274 +* Example 1: Downlink Payload: 26000A ~/~/ Set AT+RJTDC=10
1275 +* Example 2: Downlink Payload: 260002 ~/~/ Set AT+RJTDC=2
1276 +
1093 1093  = 8. AT Commands Combination =
1094 1094  
1095 1095  == 8.1 Set a fix RX2DR for downlink window ==
... ... @@ -1108,3 +1108,4 @@
1108 1108  * AT+ADR=0  [[Reference>>||anchor="H7.1AdaptiveDataRate"]]
1109 1109  * AT+DR=5  [[Reference>>||anchor="H7.4DataRate"]]
1110 1110  * AT+TXP=0  [[Reference>>||anchor="H7.14TransmitPower"]]
1295 +~)~)~)

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0