Last modified by kai on 2024/09/06 10:00
<
From version < 30.1 >
edited by Xiaoling
on 2022/05/27 17:59
To version < 50.5 >
edited by Xiaoling
on 2022/07/13 12:01
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,4 +1,4 @@
1 - **Contents：**
1 + **Table of** **Contents：**
2 2  
3 3  {{toc/}}
4 4  
... ... @@ -6,6 +6,7 @@
6 6  
7 7  = 1. Introduction =
8 8  
9 +
9 9  Dragino LoRaWAN End Node support two types of AT Commands and Downlink Commands:
10 10  
11 11  * **Common Commands:** They should be available for each sensor, such as: change uplink interval, reset device.
... ... @@ -18,14 +18,18 @@
18 18  
19 19  = 2. How to use AT Commands or Downlink command =
20 20  
22 +
21 21  * For AT Command , See Devices User Manual for Device. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
22 22  * For LoRaWAN Downlink: The gateway transfer downlink command in HEX format. This page shows the HEX format downlink code for each command. but some servers use base64 as downlink code. Below are reference for how to use downlink command:
23 -** Use HEX format to send a downlink: [[TTN v3>>doc:Main.Notes for TTN.WebHome]]
24 -** Use Base64 format to send a downlink: [[Chirpstack>>doc:Main.Notes for ChirpStack.WebHome]].
25 +** Use HEX format to send a downlink: [[TTN v3>>Notes for TTN]]
26 +** Use Base64 format to send a downlink: [[Chirpstack>>Notes for ChirpStack]]
25 25  ** See use note for more serves [[Servers Note>>doc:Main.WebHome]](IoT LoRaWAN Server)
26 26  
29 +
30 +
27 27  = 3. Support End Node and firmware version =
28 28  
33 +
29 29  (% border="1" style="background-color:#ffffcc; color:green; width:966px" %)
30 30  |=(% colspan="3" style="width: 963px;" %)(((
31 31  Dragino STM32 base hardware Firmware / LoRaWAN stack list
... ... @@ -97,16 +97,17 @@
97 97  )))
98 98  )))
99 99  
105 +
106 +
100 100  = 4. System Management Commands =
101 101  
109 +
102 102  == 4.1 Change Uplink Interval ==
103 103  
112 +
104 104  Feature: Change LoRaWAN End Node Transmit Interval.
105 105  
106 -(% class="box infomessage" %)
107 -(((
108 -**AT Command: AT+TDC**
109 -)))
115 +(% style="color:blue" %)**AT Command: AT+TDC**
110 110  
111 111  (% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
112 112  |=(% colspan="3" style="width: 724px;" %)AT+TDC
... ... @@ -120,11 +120,11 @@
120 120  Set transmit interval to 60000ms = 60 seconds
121 121  )))
122 122  
123 -{{info}}
124 -**Downlink Command: 0x01**
125 -{{/info}}
126 -
127 127  (((
130 +
131 +
132 +(% style="color:blue" %)**Downlink Command: 0x01**
133 +
128 128  Format: Command Code (0x01) followed by 3 bytes time value.
129 129  )))
130 130  
... ... @@ -135,14 +135,17 @@
135 135  * **Example 1**: Downlink Payload:** 0100001E** ~/~/ Set Transmit Interval (TDC) = 30 seconds
136 136  * **Example 2**: Downlink Payload:** 0100003C** ~/~/ Set Transmit Interval (TDC) = 60 seconds
137 137  
144 +
145 +
138 138  == 4.2 Reboot End Node ==
139 139  
148 +
140 140  Feature: Reboot End Node to perform a new OTAA or ABP Join.
141 141  
142 -{{info}}
143 -**AT Command: ATZ**
144 -{{/info}}
145 145  
152 +(% style="color:blue" %)**AT Command: ATZ**
153 +
154 +
146 146  (% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
147 147  |=(% colspan="3" %)ATZ: Trig a reset of the MCU
148 148  |**Command Example**|**Function**|**Response**
... ... @@ -160,10 +160,10 @@
160 160  <followed by the Tx and Rx information>
161 161  )))
162 162  
163 -{{info}}
164 -**Downlink Command: 0x04**
165 -{{/info}}
166 166  
173 +(% style="color:blue" %)**Downlink Command: 0x04**
174 +
175 +
167 167  (((
168 168  Format: Command Code (0x04) followed by FF.
169 169  )))
... ... @@ -176,11 +176,10 @@
176 176  
177 177  == 4.3 Reset to factory Default ==
178 178  
188 +
179 179  Feature: Reset the parameters to Factory Default, factory default value depends on the firmware settings, the OTAA and ABP keys will reserve after this command.
180 180  
181 -{{info}}
182 -**AT Command: AT+FDR**
183 -{{/info}}
191 +(% style="color:blue" %)**AT Command: AT+FDR**
184 184  
185 185  (% border="1" style="background-color:#ffffcc; color:green; width:831.222px" %)
186 186  |=(% colspan="3" style="width: 828px;" %)Reset to factory default
... ... @@ -199,10 +199,10 @@
199 199  Please set the parameters or reset Device to apply change
200 200  )))
201 201  
202 -{{info}}
203 -**Downlink Command: 0x04**
204 -{{/info}}
205 205  
211 +(% style="color:blue" %)**Downlink Command: 0x04**
212 +
213 +
206 206  (((
207 207  Format: Command Code (0x04) followed by FE.
208 208  )))
... ... @@ -216,10 +216,10 @@
216 216  
217 217  Feature: Show firmware version. No downlink command yet.
218 218  
219 -{{info}}
220 -**AT Command: AT+VER**
221 -{{/info}}
222 222  
228 +(% style="color:blue" %)**AT Command: AT+VER**
229 +
230 +
223 223  (% border="1" style="background-color:#ffffcc; color:green; width:586px" %)
224 224  |=(% colspan="3" style="width: 583px;" %)AT+VER: Image Version and Frequency Band
225 225  |(% style="width:170px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:113px" %)**Response**
... ... @@ -229,10 +229,10 @@
229 229  OK
230 230  )))
231 231  
232 -{{info}}
233 -**Downlink Command: 0x26 (Valid in 006 stack)**
234 -{{/info}}
235 235  
241 +(% style="color:blue" %)**Downlink Command: 0x26 (Valid in 006 stack)**
242 +
243 +
236 236  (((
237 237  Downlink Format: 0x26
238 238  )))
... ... @@ -275,10 +275,10 @@
275 275  
276 276  Feature: Show All configure. No downlink command yet.
277 277  
278 -{{info}}
279 -**AT Command: AT+CFG**
280 -{{/info}}
281 281  
287 +(% style="color:blue" %)**AT Command: AT+CFG**
288 +
289 +
282 282  (% border="1" style="background-color:#ffffcc; color:green; width:599.222px" %)
283 283  |=(% colspan="3" style="width: 596px;" %)AT+CFG: Print all configurations
284 284  |(% style="width:160px" %)**Command Example**|(% style="width:154px" %)**Function**|(% style="width:280px" %)**Response**
... ... @@ -302,10 +302,10 @@
302 302  
303 303  Feature: Get or Set the Application EUI.
304 304  
305 -{{info}}
306 -**AT Command: AT+APPEUI**
307 -{{/info}}
308 308  
314 +(% style="color:blue" %)**AT Command: AT+APPEUI**
315 +
316 +
309 309  (% border="1" style="background-color:#ffffcc; color:green; width:686.222px" %)
310 310  |=(% colspan="3" style="width: 683px;" %)AT+APPEUI
311 311  |(% style="width:305px" %)**Command Example**|(% style="width:186px" %)**Function**|(% style="width:191px" %)**Response**
... ... @@ -318,10 +318,10 @@
318 318  
319 319  Feature: Get or Set the Application Key.
320 320  
321 -{{info}}
322 -**AT Command: AT+APPKEY**
323 -{{/info}}
324 324  
330 +(% style="color:blue" %)**AT Command: AT+APPKEY**
331 +
332 +
325 325  (% border="1" style="background-color:#ffffcc; color:green; width:976.222px" %)
326 326  |=(% colspan="3" style="width: 973px;" %)AT+APPKEY
327 327  |(% style="width:441px" %)**Command Example**|(% style="width:180px" %)**Function**|(% style="width:350px" %)**Response**
... ... @@ -334,10 +334,10 @@
334 334  
335 335  Feature: Get or Set the Application Session Key.
336 336  
337 -{{info}}
338 -**AT Command: AT+APPSKEY**
339 -{{/info}}
340 340  
346 +(% style="color:blue" %)**AT Command: AT+APPSKEY**
347 +
348 +
341 341  (% border="1" style="background-color:#ffffcc; color:green; width:1040.22px" %)
342 342  |=(% colspan="3" style="width: 1037px;" %)AT+APPSKEY
343 343  |(% style="width:451px" %)**Command Example**|(% style="width:231px" %)**Function**|(% style="width:354px" %)**Response**
... ... @@ -352,10 +352,10 @@
352 352  
353 353  Feature: Get or Set the Device Address.
354 354  
355 -{{info}}
356 -**AT Command: AT+DADDR**
357 -{{/info}}
358 358  
364 +(% style="color:blue" %)**AT Command: AT+DADDR**
365 +
366 +
359 359  (% border="1" style="background-color:#ffffcc; color:green; width:795.222px" %)
360 360  |=(% colspan="3" style="width: 792px;" %)AT+DADDR
361 361  |(% style="width:192px" %)**Command Example**|(% style="width:241px" %)**Function**|(% style="width:359px" %)**Response**
... ... @@ -366,15 +366,14 @@
366 366  )))
367 367  |(% style="width:192px" %)AT+DADDR=A8 40 41 FF|(% style="width:241px" %)Set the Application Session Key.|(% style="width:359px" %)OK
368 368  
369 -
370 370  == 5.5 Device EUI ==
371 371  
372 372  Feature: Get or Set the Device EUI.
373 373  
374 -{{info}}
375 -**AT Command: AT+DEUI**
376 -{{/info}}
377 377  
382 +(% style="color:blue" %)**AT Command: AT+DEUI**
383 +
384 +
378 378  (% border="1" style="background-color:#ffffcc; color:green; width:1035.22px" %)
379 379  |=(% colspan="3" style="width: 1032px;" %)AT+DEUI
380 380  |(% style="width:250px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:634px" %)**Response**
... ... @@ -385,16 +385,14 @@
385 385  OK
386 386  )))
387 387  
388 -
389 -
390 390  == 5.6 Network ID ==
391 391  
392 392  Feature: Get or Set the Network ID.(You can enter this command change only after successful network connection)
393 393  
394 -{{info}}
395 -**AT Command: AT+NWKID**
396 -{{/info}}
397 397  
400 +(% style="color:blue" %)**AT Command: AT+NWKID**
401 +
402 +
398 398  (% border="1" style="background-color:#ffffcc; color:green; width:448.222px" %)
399 399  |=(% colspan="3" style="width: 445px;" %)AT+NWKID
400 400  |(% style="width:191px" %)**Command Example**|(% style="width:153px" %)**Function**|(% style="width:101px" %)**Response**
... ... @@ -403,16 +403,14 @@
403 403  )))
404 404  |(% style="width:191px" %)AT+NWKID=A8 40 41 FF|(% style="width:153px" %)Set the Network ID.|(% style="width:101px" %)OK
405 405  
406 -
407 -
408 408  == 5.7 Network Session Key ==
409 409  
410 410  Feature: Get or Set the Network Session Key
411 411  
412 -{{info}}
413 -**AT Command: AT+NWKSKEY**
414 -{{/info}}
415 415  
416 +(% style="color:blue" %)**AT Command: AT+NWKSKEY**
417 +
418 +
416 416  (% border="1" style="background-color:#ffffcc; color:green; width:1017.22px" %)
417 417  |=(% colspan="3" style="width: 1014px;" %)AT+NWKSKEY
418 418  |(% style="width:455px" %)**Command Example**|(% style="width:215px" %)**Function**|(% style="width:343px" %)**Response**
... ... @@ -425,12 +425,14 @@
425 425  
426 426  == 6.1 Confirm Mode ==
427 427  
431 +=== AT+CFM command before DR-LWS007 software stack ===
432 +
428 428  Feature: Get or Set the confirmation mode (0-1).
429 429  
430 -{{info}}
431 -**AT Command: AT+CFM**
432 -{{/info}}
433 433  
436 +(% style="color:blue" %)**AT Command: AT+CFM**
437 +
438 +
434 434  (% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
435 435  |=(% colspan="3" style="width: 707px;" %)AT+CFM
436 436  |(% style="width:155px" %)**Command Example**|(% style="width:205px" %)**Function**|(% style="width:346px" %)**Response**
... ... @@ -440,7 +440,7 @@
440 440  |(% style="width:155px" %)AT+CFM=1|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)OK
441 441  |(% style="width:155px" %)AT+CFM=2|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)While Error in format, return AT_PARAM_ERROR
442 442  
443 -Downlink Command: 0x05
448 +(% style="color:blue" %)**Downlink Command: 0x05**
444 444  
445 445  Format: Command Code (0x05) followed by 2 bytes mode value.
446 446  
... ... @@ -449,14 +449,62 @@
449 449  * Example 1: Downlink Payload: 0501 ~/~/ Set AT+CFM=1
450 450  * Example 2: Downlink Payload: 0500 ~/~/ Set AT+CFM=0
451 451  
457 +=== AT+CFM command since DR-LWS007 software stack ===
458 +
459 +
460 +(% style="color:blue" %)**AT Command: AT+CFM**
461 +
462 +
463 +(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
464 +|=(% colspan="3" style="width: 707px;" %)AT+CFM
465 +|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
466 +|(% style="width:160px" %)(((
467 +AT+CFM=1,0,0
468 +
469 +value1
470 +)))|(% style="width:198px" %)confirmed uplink|(% style="width:349px" %)(((
471 +1
472 +
473 +OK
474 +)))
475 +|(% style="width:160px" %)(((
476 +AT+CFM=0,?,0
477 +
478 +value2
479 +)))|(% style="width:198px" %)set max retry , range: 0 ~~ 7|(% style="width:349px" %)(((
480 +0~~7
481 +
482 +OK
483 +)))
484 +|(% style="width:160px" %)(((
485 +AT+CFM=0,0,1
486 +
487 +value3
488 +)))|(% style="width:198px" %)uplink fcnt increase by 1 for each retry|(% style="width:349px" %)(((
489 +1
490 +
491 +OK
492 +)))
493 +
494 +
495 +(% style="color:blue" %)**Downlink Command: 0x05**
496 +
497 +
498 +Format: Command Code (0x05) followed by 2 bytes mode value.
499 +
500 +If the downlink payload=05010101, it means set end node to use confirm mode, while type code is 05.
501 +
502 +* Example 1: Downlink Payload: 05010101 ~/~/ Set AT+CFM=1,1,1
503 +* Example 2: Downlink Payload: 05000700 ~/~/ Set AT+CFM=0,7,0
504 +
452 452  == 6.2 Confirm Status ==
453 453  
454 454  Feature: Get confirmation status of the last AT+SEND (0-1).
455 455  
456 -{{info}}
457 -**AT Command: AT+CFS**
458 -{{/info}}
459 459  
510 +(% style="color:blue" %)**AT Command: AT+CFS**
511 +
512 +
460 460  (% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
461 461  |=(% colspan="3" style="width: 531px;" %)AT+CFS
462 462  |(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:178px" %)**Response**
... ... @@ -468,10 +468,10 @@
468 468  
469 469  Feature: Join network.
470 470  
471 -{{info}}
472 -**AT Command: AT+JOIN**
473 -{{/info}}
474 474  
525 +(% style="color:blue" %)**AT Command: AT+JOIN**
526 +
527 +
475 475  (% border="1" style="background-color:#ffffcc; color:green; width:647.222px" %)
476 476  |=(% colspan="3" style="width: 644px;" %)AT+JOIN
477 477  |(% style="width:163px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:334px" %)**Response**
... ... @@ -485,10 +485,10 @@
485 485  
486 486  Feature: Get or Set the Network Join Mode. (0: ABP, 1: OTAA).
487 487  
488 -{{info}}
489 -**AT Command: AT+NJM**
490 -{{/info}}
491 491  
542 +(% style="color:blue" %)**AT Command: AT+NJM**
543 +
544 +
492 492  (% border="1" style="background-color:#ffffcc; color:green; width:753.222px" %)
493 493  |=(% colspan="3" style="width: 750px;" %)AT+NJM
494 494  |(% style="width:162px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:361px" %)**Response**
... ... @@ -498,15 +498,15 @@
498 498  |(% style="width:162px" %)AT+NJM=0|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)OK
499 499  |(% style="width:162px" %)AT+NJM=2|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)While Error in format, return AT_PARAM_ERROR
500 500  
501 -{{info}}
502 -**Downlink Command: 0x20**
503 -{{/info}}
504 504  
555 +(% style="color:blue" %)**Downlink Command: 0x20**
556 +
557 +
505 505  Format: Command Code (0x20) followed by 1 bytes mode value.
506 506  
507 507  If the downlink payload=2000, it means set the Network Join Mode, while type code is 20.
508 508  
509 -* **Example 1: **Downlink Payload: **2000** ~/~/ Set AT+NJM=O
562 +* **Example 1: **Downlink Payload: **2000** ~/~/ Set AT+NJM=0
510 510  * **Example 2:** Downlink Payload: **2001** ~/~/ Set AT+NJM=1
511 511  
512 512  == 6.5 LoRa® Network Join Status ==
... ... @@ -513,10 +513,10 @@
513 513  
514 514  Feature: LoRa® Network Join Status.
515 515  
516 -{{info}}
517 -**AT Command: AT+NJS**
518 -{{/info}}
519 519  
570 +(% style="color:blue" %)**AT Command: AT+NJS**
571 +
572 +
520 520  (% border="1" style="background-color:#ffffcc; color:green; width:498.222px" %)
521 521  |=(% colspan="3" style="width: 495px;" %)AT+NJS
522 522  |(% style="width:169px" %)**Command Example**|(% style="width:164px" %)**Function**|(% style="width:161px" %)**Response**
... ... @@ -528,10 +528,10 @@
528 528  
529 529  Feature: Print Last Received Data in Raw Format<port:data>.
530 530  
531 -{{info}}
532 -**AT Command: AT+RECV**
533 -{{/info}}
534 534  
585 +(% style="color:blue" %)**AT Command: AT+RECV**
586 +
587 +
535 535  (% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
536 536  |=(% colspan="3" style="width: 584px;" %)AT+RECV
537 537  |(% style="width:161px" %)**Command Example**|(% style="width:272px" %)**Function**|(% style="width:150px" %)**Response**
... ... @@ -543,10 +543,10 @@
543 543  
544 544  Feature: Print Last Received Data in Binary Format<port:data>.
545 545  
546 -{{info}}
547 -**AT Command: AT+RECVB**
548 -{{/info}}
549 549  
600 +(% style="color:blue" %)**AT Command: AT+RECVB**
601 +
602 +
550 550  (% border="1" style="background-color:#ffffcc; color:green; width:793.222px" %)
551 551  |=(% colspan="3" style="width: 790px;" %)AT+RECVB
552 552  |(% style="width:173px" %)**Command Example**|(% style="width:497px" %)**Function**|(% style="width:120px" %)**Response**
... ... @@ -558,10 +558,10 @@
558 558  
559 559  Feature: Send Text Data<port:data>.
560 560  
561 -{{info}}
562 -**AT Command: AT+SEND**
563 -{{/info}}
564 564  
615 +(% style="color:blue" %)**AT Command: AT+SEND**
616 +
617 +
565 565  (% border="1" style="background-color:#ffffcc; color:green; width:991.222px" %)
566 566  |=(% colspan="3" style="width: 988px;" %)AT+SEND
567 567  |(% style="width:201px" %)**Command Example**|(% style="width:340px" %)**Function**|(% style="width:446px" %)**Response**
... ... @@ -577,10 +577,10 @@
577 577  
578 578  Feature: Send hexadecimal data along with the application port.
579 579  
580 -{{info}}
581 -**AT Command: AT+SENDB**
582 -{{/info}}
583 583  
634 +(% style="color:blue" %)**AT Command: AT+SENDB**
635 +
636 +
584 584  (% border="1" style="background-color:#ffffcc; color:green; width:1120.22px" %)
585 585  |=(% colspan="3" style="width: 1117px;" %)AT+SENDB
586 586  |(% style="width:257px" %)**Command Example**|(% style="width:406px" %)**Function**|(% style="width:453px" %)**Response**
... ... @@ -597,10 +597,10 @@
597 597  
598 598  Feature: Get or Set the Adaptive Data Rate setting. (0: off, 1: on).
599 599  
600 -{{info}}
601 -**AT Command: AT+ADR**
602 -{{/info}}
603 603  
654 +(% style="color:blue" %)**AT Command: AT+ADR**
655 +
656 +
604 604  (% border="1" style="background-color:#ffffcc; color:green; width:683.222px" %)
605 605  |=(% colspan="3" style="width: 680px;" %)AT+ADR
606 606  |(% style="width:162px" %)**Command Example**|(% style="width:266px" %)**Function**|(% style="width:250px" %)**Response**
... ... @@ -612,11 +612,11 @@
612 612  AT_PARAM_ERROR
613 613  )))
614 614  
615 -{{info}}
616 -**Downlink Command: 0x22**
617 -{{/info}}
618 618  
669 +(% style="color:blue" %)**Downlink Command: 0x22**
619 619  
671 +
672 +
620 620  If the downlink payload=2201, it means setting the adaptive data rate to 1, while type code is 22.
621 621  
622 622  * **Example 1**: Downlink Payload: **2201** ~/~/ Set AT+ADR=1.
... ... @@ -626,10 +626,10 @@
626 626  
627 627  Feature: Get or Set the Device Class(Currently only support class A, class C).
628 628  
629 -{{info}}
630 -**AT Command:AT+CLASS**
631 -{{/info}}
632 632  
683 +(% style="color:blue" %)**AT Command:AT+CLASS**
684 +
685 +
633 633  (% border="1" style="background-color:#ffffcc; color:green; width:507.222px" %)
634 634  |=(% colspan="3" style="width: 504px;" %)AT+CLASS
635 635  |(% style="width:163px" %)**Command Example**|(% style="width:166px" %)**Function**|(% style="width:175px" %)**Response**
... ... @@ -644,10 +644,10 @@
644 644  
645 645  Feature: Get or Set the ETSI Duty Cycle setting - 0=disable, 1=enable - Only for testing.
646 646  
647 -{{info}}
648 -**AT Command:AT+DCS**
649 -{{/info}}
650 650  
701 +(% style="color:blue" %)**AT Command:AT+DCS**
702 +
703 +
651 651  (% border="1" style="background-color:#ffffcc; color:green; width:515.222px" %)
652 652  |=(% colspan="3" style="width: 512px;" %)AT+DCS
653 653  |(% style="width:165px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:107px" %)**Response**
... ... @@ -662,10 +662,10 @@
662 662  
663 663  Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) . Note: while set Data Rate, please use set Adptive Data Rate, ADR=0 first. otherwise device will response to server's ADR command and change the DR to the setting from server
664 664  
665 -{{info}}
666 -**AT Command: AT+DR**
667 -{{/info}}
668 668  
719 +(% style="color:blue" %)**AT Command: AT+DR**
720 +
721 +
669 669  (% border="1" style="background-color:#ffffcc; color:green; width:466.222px" %)
670 670  |=(% colspan="3" style="width: 463px;" %)AT+DR
671 671  |(% style="width:156px" %)**Command Example**|(% style="width:167px" %)**Function**|(% style="width:140px" %)**Response**
... ... @@ -676,11 +676,11 @@
676 676  
677 677  )))
678 678  
679 -{{info}}
680 -**Downlink Command: 0x2200aaFF**
681 -{{/info}}
682 682  
733 +(% style="color:blue" %)**Downlink Command: 0x2200aaFF**
683 683  
735 +
736 +
684 684  If the downlink payload=220001FF, it means setting the data rate to 1, while type code is 22 00 aa FF.
685 685  
686 686  * **Example 1**: Downlink Payload: **220001FF** ~/~/ Set AT+DR=1.
... ... @@ -690,10 +690,10 @@
690 690  
691 691  Feature: Get or Set the Frame Counter Downlink.
692 692  
693 -{{info}}
694 -**AT Command:AT+FCD**
695 -{{/info}}
696 696  
747 +(% style="color:blue" %)**AT Command:AT+FCD**
748 +
749 +
697 697  (% border="1" style="background-color:#ffffcc; color:green; width:693.222px" %)
698 698  |=(% colspan="3" style="width: 690px;" %)AT+FCD
699 699  |(% style="width:162px" %)**Command Example**|(% style="width:258px" %)**Function**|(% style="width:269px" %)**Response**
... ... @@ -710,10 +710,10 @@
710 710  
711 711  Feature: Get or Set the Frame Counter Uplink.
712 712  
713 -{{info}}
714 -**AT Command:AT+FCU**
715 -{{/info}}
716 716  
767 +(% style="color:blue" %)**AT Command:AT+FCU**
768 +
769 +
717 717  (% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
718 718  |=(% colspan="3" style="width: 531px;" %)AT+FCU
719 719  |(% style="width:177px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:113px" %)**Response**
... ... @@ -728,10 +728,10 @@
728 728  
729 729  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 1 in ms.
730 730  
731 -{{info}}
732 -**AT Command:AT+JN1DL**
733 -{{/info}}
734 734  
785 +(% style="color:blue" %)**AT Command:AT+JN1DL**
786 +
787 +
735 735  (% border="1" style="background-color:#ffffcc; color:green; width:537.222px" %)
736 736  |=(% colspan="3" style="width: 534px;" %)AT+JN1DL
737 737  |(% style="width:164px" %)**Command Example**|(% style="width:229px" %)**Function**|(% style="width:140px" %)**Response**
... ... @@ -746,10 +746,10 @@
746 746  
747 747  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 2 in ms.
748 748  
749 -{{info}}
750 -**AT Command:AT+JN2DL**
751 -{{/info}}
752 752  
803 +(% style="color:blue" %)**AT Command:AT+JN2DL**
804 +
805 +
753 753  (% border="1" style="background-color:#ffffcc; color:green; width:538.222px" %)
754 754  |=(% colspan="3" style="width: 535px;" %)AT+JN2DL
755 755  |(% style="width:160px" %)**Command Example**|(% style="width:228px" %)**Function**|(% style="width:146px" %)**Response**
... ... @@ -762,12 +762,14 @@
762 762  
763 763  == 7.9 Public Network Mode ==
764 764  
765 -Feature: Get or Set the public network mode. (0: off, 1: on)
818 +Feature: Get or Set the public network mode. (0: off, 1: on). A Public LoRaWAN network use 0x34 as syncword. Default Settings; PNM=1
766 766  
767 -{{info}}
768 -**AT Command:AT+PNM**
769 -{{/info}}
820 +Notice: If user build their own LoRaWAN server but still use syncword=0x34, this is still considered a public LoRaWAN network
770 770  
822 +
823 +(% style="color:blue" %)**AT Command:AT+PNM**
824 +
825 +
771 771  (% border="1" style="background-color:#ffffcc; color:green; width:667.222px" %)
772 772  |=(% colspan="3" style="width: 664px;" %)AT+PNM
773 773  |(% style="width:166px" %)**Command Example**|(% style="width:225px" %)**Function**|(% style="width:272px" %)**Response**
... ... @@ -774,20 +774,25 @@
774 774  |(% style="width:166px" %)AT+PNM=?|(% style="width:225px" %)Get the public network mode.|(% style="width:272px" %)1(((
775 775  OK
776 776  )))
777 -|(% style="width:166px" %)AT+PNM=1|(% style="width:225px" %)Set the public network mode.|(% style="width:272px" %)(System will write new value to PNM)(((
832 +|(% style="width:166px" %)AT+PNM=1|(% style="width:225px" %)(((
833 +Set the public network mode.
834 +
835 +Set syncword=0x34
836 +)))|(% style="width:272px" %)(System will write new value to PNM)(((
778 778  OK
779 779  
780 780  
781 781  )))
841 +|(% style="width:166px" %)AT+PNM=0|(% style="width:225px" %)Set to use private network autoset syncword=0x12|(% style="width:272px" %)
782 782  
783 783  == 7.10 Receive Delay1 ==
784 784  
785 785  Feature: Get or Set the delay between the end of the Tx and the Rx Window 1 in ms
786 786  
787 -{{info}}
788 -**AT Command:AT+RX1DL**
789 -{{/info}}
790 790  
848 +(% style="color:blue" %)**AT Command:AT+RX1DL**
849 +
850 +
791 791  (% border="1" style="background-color:#ffffcc; color:green; width:408.222px" %)
792 792  |=(% colspan="3" style="width: 405px;" %)AT+RX1DL
793 793  |(% style="width:155px" %)**Command Example**|(% style="width:128px" %)**Function**|(% style="width:122px" %)**Response**
... ... @@ -802,10 +802,10 @@
802 802  
803 803  Feature: Get or Set the delay between the end of the Tx and the Rx Window 2 in ms
804 804  
805 -{{info}}
806 -**AT Command:AT+RX2DL**
807 -{{/info}}
808 808  
866 +(% style="color:blue" %)**AT Command:AT+RX2DL**
867 +
868 +
809 809  (% border="1" style="background-color:#ffffcc; color:green; width:481.222px" %)
810 810  |=(% colspan="3" style="width: 478px;" %)AT+RX2DL
811 811  |(% style="width:175px" %)**Command Example**|(% style="width:152px" %)**Function**|(% style="width:150px" %)**Response**
... ... @@ -820,10 +820,10 @@
820 820  
821 821  Feature: Get or Set the Rx2 window data rate (0-7 corresponding to DR_X)
822 822  
823 -{{info}}
824 -**AT Command:AT+RX2DR**
825 -{{/info}}
826 826  
884 +(% style="color:blue" %)**AT Command:AT+RX2DR**
885 +
886 +
827 827  (% border="1" style="background-color:#ffffcc; color:green; width:525.222px" %)
828 828  |=(% colspan="3" style="width: 522px;" %)AT+RX2DR
829 829  |(% style="width:160px" %)**Command Example**|(% style="width:232px" %)**Function**|(% style="width:130px" %)**Response**
... ... @@ -838,10 +838,10 @@
838 838  
839 839  Feature: Get or Set the Rx2 window frequency
840 840  
841 -{{info}}
842 -**AT Command:AT+RX2FQ**
843 -{{/info}}
844 844  
902 +(% style="color:blue" %)**AT Command:AT+RX2FQ**
903 +
904 +
845 845  (% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
846 846  |=(% colspan="3" style="width: 584px;" %)AT+RX2FQ
847 847  |(% style="width:183px" %)**Command Example**|(% style="width:240px" %)**Function**|(% style="width:160px" %)**Response**
... ... @@ -856,10 +856,10 @@
856 856  
857 857  Feature: Get or Set the Transmit Power(0-5, MAX:0, MIN:5, according to LoRaWAN Spec, or 40=10dB, 41 = 11dB, …, 50 = 20dB which is out of LoRaWAN spec. )
858 858  
859 -{{info}}
860 -**AT Command:AT+TXP**
861 -{{/info}}
862 862  
920 +(% style="color:blue" %)**AT Command:AT+TXP**
921 +
922 +
863 863  (% border="1" style="background-color:#ffffcc; color:green; width:465.222px" %)
864 864  |=(% colspan="3" style="width: 462px;" %)AT+TXP
865 865  |(% style="width:161px" %)**Command Example**|(% style="width:189px" %)**Function**|(% style="width:112px" %)**Response**
... ... @@ -881,10 +881,10 @@
881 881  
882 882  Feature: Get or Set the Rx2 window frequency
883 883  
884 -{{info}}
885 -**AT Command:AT+RSSI**
886 -{{/info}}
887 887  
945 +(% style="color:blue" %)**AT Command:AT+RSSI**
946 +
947 +
888 888  (% border="1" style="background-color:#ffffcc; color:green; width:557.222px" %)
889 889  |=(% colspan="3" style="width: 554px;" %)AT+RSSI
890 890  |(% style="width:164px" %)**Command Example**|(% style="width:289px" %)**Function**|(% style="width:100px" %)**Response**
... ... @@ -1091,6 +1091,129 @@
1091 1091  * **Example 1**: Downlink Payload: **2101** ~/~/ set packet receiving response level to 1
1092 1092  * **Example 2**: Downlink Payload: **2102** ~/~/ set packet receiving response level to 2
1093 1093  
1154 +== 7.24 Controls NBTrans in unconfirmed uplink mode（LWS007 NBTrans:Set retransmission packets) ==
1155 +
1156 +{{info}}
1157 +**AT Command: AT+SETMAXNBTRANS **
1158 +{{/info}}
1159 +
1160 +(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1161 +|=(% colspan="3" style="width: 533px;" %)AT+**SETMAXNBTRANS**
1162 +|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1163 +|(% style="width:160px" %)**AT+SETMAXNBTRANS=1，0**|(% style="width:263px" %)Value1: set the maximum NBTrans.|(% style="width:109px" %)1(((
1164 +OK
1165 +)))
1166 +|(% style="width:160px" %)**AT+SETMAXNBTRANS=？，1**|(% style="width:263px" %)value2: 0: uplink fcnt doesn't change for each NBTrans; 1: uplink fcnt increase by 1 for each NBTrans.|(% style="width:109px" %)(((
1167 +1
1168 +
1169 +OK
1170 +)))
1171 +
1172 +{{info}}
1173 +**Downlink Command: 0x33**
1174 +{{/info}}
1175 +
1176 +Format: Command Code (0x33) followed by 2 bytes mode value.
1177 +
1178 +If the downlink payload=330100, it means set end node to use confirm mode, while type code is 33.
1179 +
1180 +* Example 1: Downlink Payload: 330100 ~/~/ Set AT+SETMAXNBTRANS=1,0
1181 +* Example 2: Downlink Payload: 330201 ~/~/ Set AT+SETMAXNBTRANS=2,1
1182 +
1183 +== 7.25 Device offline rejoining （LWS007) ==
1184 +
1185 +{{info}}
1186 +**AT Command: AT+DDETECT**
1187 +{{/info}}
1188 +
1189 +(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
1190 +|=(% colspan="3" style="width: 707px;" %)AT+**DDETECT**
1191 +|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
1192 +|(% style="width:160px" %)(((
1193 +AT+DDETECT=1,1440,2880
1194 +
1195 +value1
1196 +)))|(% style="width:198px" %)Enable online detect|(% style="width:349px" %)(((
1197 +1
1198 +
1199 +OK
1200 +)))
1201 +|(% style="width:160px" %)(((
1202 +AT+DDETECT=1,?,2880
1203 +
1204 +value2
1205 +)))|(% style="width:198px" %)Online detection packet sending time|(% style="width:349px" %)(((
1206 +
1207 +
1208 +OK
1209 +)))
1210 +|(% style="width:160px" %)(((
1211 +AT+DDETECT=1,1440,？
1212 +
1213 +value3
1214 +)))|(% style="width:198px" %)Process rejoin|(% style="width:349px" %)(((
1215 +
1216 +
1217 +OK
1218 +)))
1219 +
1220 +{{info}}
1221 +**Downlink Command: 0x33**
1222 +{{/info}}
1223 +
1224 +Format: Command Code (0x32) followed by 2 bytes mode value.
1225 +
1226 +If the downlink payload=320105A00B40, it means set end node to use confirm mode, while type code is 33.
1227 +
1228 +* Example 1: Downlink Payload: 320105A00B40 ~/~/ Set AT+DDETECT=1,1440,2880
1229 +
1230 +== 7.26 Request the server to send an ACK ==
1231 +
1232 +{{info}}
1233 +**AT Command: AT+PNACKMD**
1234 +{{/info}}
1235 +
1236 +(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1237 +|=(% colspan="3" style="width: 533px;" %)**AT+PNACKMD**
1238 +|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1239 +|(% style="width:160px" %)**AT+PNACKMD=1**|(% style="width:263px" %)If the node uploads the ACK as confirm, it will request the server to send an ACK. If the server ack is not received, the node will upload the packets that have not received the ACK the next time it receives the ACK|(% style="width:109px" %)1(((
1240 +OK
1241 +)))
1242 +|(% style="width:160px" %)**AT+PNACKMD=0**|(% style="width:263px" %)off request the server to send an ACK|(% style="width:109px" %)(((
1243 +0
1244 +
1245 +OK
1246 +)))
1247 +
1248 +== 7.27 Adjust network rejoining interval ==
1249 +
1250 +{{info}}
1251 +**AT Command: AT+RJTDC**
1252 +{{/info}}
1253 +
1254 +(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
1255 +|=(% colspan="3" style="width: 724px;" %)AT+RJTDC
1256 +|(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
1257 +|(% style="width:165px" %)AT+RJTDC=?|(% style="width:227px" %)Show the ReJoin data transmission interval in min|(% style="width:329px" %)30000(((
1258 +OK
1259 +
1260 +the interval is 30000ms = 30s
1261 +)))
1262 +|(% style="width:165px" %)AT+RJTDC=60000|(% style="width:227px" %)Set the ReJoin data transmission interval in min|(% style="width:329px" %)OK(((
1263 +Set the ReJoin data transmission interval to 60000ms = 60 seconds
1264 +)))
1265 +
1266 +{{info}}
1267 +**Downlink Command: 0x26**
1268 +{{/info}}
1269 +
1270 +Format: Command Code (0x26) followed by 2 bytes mode value.
1271 +
1272 +If the downlink payload=26000A, it means set end node to use confirm mode, while type code is 26.
1273 +
1274 +* Example 1: Downlink Payload: 26000A ~/~/ Set AT+RJTDC=10
1275 +* Example 2: Downlink Payload: 260002 ~/~/ Set AT+RJTDC=2
1276 +
1094 1094  = 8. AT Commands Combination =
1095 1095  
1096 1096  == 8.1 Set a fix RX2DR for downlink window ==
... ... @@ -1109,3 +1109,4 @@
1109 1109  * AT+ADR=0  [[Reference>>||anchor="H7.1AdaptiveDataRate"]]
1110 1110  * AT+DR=5  [[Reference>>||anchor="H7.4DataRate"]]
1111 1111  * AT+TXP=0  [[Reference>>||anchor="H7.14TransmitPower"]]
1295 +~)~)~)

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0