Last modified by kai on 2024/09/06 10:00
<
From version < 27.1 >
edited by Xiaoling
on 2022/05/27 17:58
To version < 50.6 >
edited by Xiaoling
on 2022/07/13 12:01
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,4 +1,4 @@
1 - **Contents：**
1 + **Table of** **Contents：**
2 2  
3 3  {{toc/}}
4 4  
... ... @@ -6,6 +6,7 @@
6 6  
7 7  = 1. Introduction =
8 8  
9 +
9 9  Dragino LoRaWAN End Node support two types of AT Commands and Downlink Commands:
10 10  
11 11  * **Common Commands:** They should be available for each sensor, such as: change uplink interval, reset device.
... ... @@ -18,14 +18,18 @@
18 18  
19 19  = 2. How to use AT Commands or Downlink command =
20 20  
22 +
21 21  * For AT Command , See Devices User Manual for Device. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
22 22  * For LoRaWAN Downlink: The gateway transfer downlink command in HEX format. This page shows the HEX format downlink code for each command. but some servers use base64 as downlink code. Below are reference for how to use downlink command:
23 -** Use HEX format to send a downlink: [[TTN v3>>doc:Main.Notes for TTN.WebHome]]
24 -** Use Base64 format to send a downlink: [[Chirpstack>>doc:Main.Notes for ChirpStack.WebHome]].
25 +** Use HEX format to send a downlink: [[TTN v3>>Notes for TTN]]
26 +** Use Base64 format to send a downlink: [[Chirpstack>>Notes for ChirpStack]]
25 25  ** See use note for more serves [[Servers Note>>doc:Main.WebHome]](IoT LoRaWAN Server)
26 26  
29 +
30 +
27 27  = 3. Support End Node and firmware version =
28 28  
33 +
29 29  (% border="1" style="background-color:#ffffcc; color:green; width:966px" %)
30 30  |=(% colspan="3" style="width: 963px;" %)(((
31 31  Dragino STM32 base hardware Firmware / LoRaWAN stack list
... ... @@ -97,16 +97,17 @@
97 97  )))
98 98  )))
99 99  
105 +
106 +
100 100  = 4. System Management Commands =
101 101  
109 +
102 102  == 4.1 Change Uplink Interval ==
103 103  
112 +
104 104  Feature: Change LoRaWAN End Node Transmit Interval.
105 105  
106 -(% class="box infomessage" %)
107 -(((
108 -**AT Command: AT+TDC**
109 -)))
115 +(% style="color:blue" %)**AT Command: AT+TDC**
110 110  
111 111  (% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
112 112  |=(% colspan="3" style="width: 724px;" %)AT+TDC
... ... @@ -120,11 +120,11 @@
120 120  Set transmit interval to 60000ms = 60 seconds
121 121  )))
122 122  
123 -{{info}}
124 -**Downlink Command: 0x01**
125 -{{/info}}
126 -
127 127  (((
130 +
131 +
132 +(% style="color:blue" %)**Downlink Command: 0x01**
133 +
128 128  Format: Command Code (0x01) followed by 3 bytes time value.
129 129  )))
130 130  
... ... @@ -136,14 +136,16 @@
136 136  * **Example 2**: Downlink Payload:** 0100003C** ~/~/ Set Transmit Interval (TDC) = 60 seconds
137 137  
138 138  
145 +
139 139  == 4.2 Reboot End Node ==
140 140  
148 +
141 141  Feature: Reboot End Node to perform a new OTAA or ABP Join.
142 142  
143 -{{info}}
144 -**AT Command: ATZ**
145 -{{/info}}
146 146  
152 +(% style="color:blue" %)**AT Command: ATZ**
153 +
154 +
147 147  (% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
148 148  |=(% colspan="3" %)ATZ: Trig a reset of the MCU
149 149  |**Command Example**|**Function**|**Response**
... ... @@ -161,10 +161,10 @@
161 161  <followed by the Tx and Rx information>
162 162  )))
163 163  
164 -{{info}}
165 -**Downlink Command: 0x04**
166 -{{/info}}
167 167  
173 +(% style="color:blue" %)**Downlink Command: 0x04**
174 +
175 +
168 168  (((
169 169  Format: Command Code (0x04) followed by FF.
170 170  )))
... ... @@ -177,11 +177,10 @@
177 177  
178 178  == 4.3 Reset to factory Default ==
179 179  
188 +
180 180  Feature: Reset the parameters to Factory Default, factory default value depends on the firmware settings, the OTAA and ABP keys will reserve after this command.
181 181  
182 -{{info}}
183 -**AT Command: AT+FDR**
184 -{{/info}}
191 +(% style="color:blue" %)**AT Command: AT+FDR**
185 185  
186 186  (% border="1" style="background-color:#ffffcc; color:green; width:831.222px" %)
187 187  |=(% colspan="3" style="width: 828px;" %)Reset to factory default
... ... @@ -200,10 +200,10 @@
200 200  Please set the parameters or reset Device to apply change
201 201  )))
202 202  
203 -{{info}}
204 -**Downlink Command: 0x04**
205 -{{/info}}
206 206  
211 +(% style="color:blue" %)**Downlink Command: 0x04**
212 +
213 +
207 207  (((
208 208  Format: Command Code (0x04) followed by FE.
209 209  )))
... ... @@ -217,10 +217,10 @@
217 217  
218 218  Feature: Show firmware version. No downlink command yet.
219 219  
220 -{{info}}
221 -**AT Command: AT+VER**
222 -{{/info}}
223 223  
228 +(% style="color:blue" %)**AT Command: AT+VER**
229 +
230 +
224 224  (% border="1" style="background-color:#ffffcc; color:green; width:586px" %)
225 225  |=(% colspan="3" style="width: 583px;" %)AT+VER: Image Version and Frequency Band
226 226  |(% style="width:170px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:113px" %)**Response**
... ... @@ -230,10 +230,10 @@
230 230  OK
231 231  )))
232 232  
233 -{{info}}
234 -**Downlink Command: 0x26 (Valid in 006 stack)**
235 -{{/info}}
236 236  
241 +(% style="color:blue" %)**Downlink Command: 0x26 (Valid in 006 stack)**
242 +
243 +
237 237  (((
238 238  Downlink Format: 0x26
239 239  )))
... ... @@ -276,10 +276,10 @@
276 276  
277 277  Feature: Show All configure. No downlink command yet.
278 278  
279 -{{info}}
280 -**AT Command: AT+CFG**
281 -{{/info}}
282 282  
287 +(% style="color:blue" %)**AT Command: AT+CFG**
288 +
289 +
283 283  (% border="1" style="background-color:#ffffcc; color:green; width:599.222px" %)
284 284  |=(% colspan="3" style="width: 596px;" %)AT+CFG: Print all configurations
285 285  |(% style="width:160px" %)**Command Example**|(% style="width:154px" %)**Function**|(% style="width:280px" %)**Response**
... ... @@ -297,8 +297,6 @@
297 297  OK
298 298  )))
299 299  
300 -
301 -
302 302  = 5. Keys, IDs and EUIs management =
303 303  
304 304  == 5.1 Application EUI ==
... ... @@ -305,10 +305,10 @@
305 305  
306 306  Feature: Get or Set the Application EUI.
307 307  
308 -{{info}}
309 -**AT Command: AT+APPEUI**
310 -{{/info}}
311 311  
314 +(% style="color:blue" %)**AT Command: AT+APPEUI**
315 +
316 +
312 312  (% border="1" style="background-color:#ffffcc; color:green; width:686.222px" %)
313 313  |=(% colspan="3" style="width: 683px;" %)AT+APPEUI
314 314  |(% style="width:305px" %)**Command Example**|(% style="width:186px" %)**Function**|(% style="width:191px" %)**Response**
... ... @@ -317,16 +317,14 @@
317 317  )))
318 318  |(% style="width:305px" %)AT+APPEUI=00 b3 d5 7e f0 00 4d 34|(% style="width:186px" %)Set the Application EUI|(% style="width:191px" %)OK
319 319  
320 -
321 -
322 322  == 5.2 Application Key ==
323 323  
324 324  Feature: Get or Set the Application Key.
325 325  
326 -{{info}}
327 -**AT Command: AT+APPKEY**
328 -{{/info}}
329 329  
330 +(% style="color:blue" %)**AT Command: AT+APPKEY**
331 +
332 +
330 330  (% border="1" style="background-color:#ffffcc; color:green; width:976.222px" %)
331 331  |=(% colspan="3" style="width: 973px;" %)AT+APPKEY
332 332  |(% style="width:441px" %)**Command Example**|(% style="width:180px" %)**Function**|(% style="width:350px" %)**Response**
... ... @@ -335,16 +335,14 @@
335 335  )))
336 336  |(% style="width:441px" %)AT+APPKEY=00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35|(% style="width:180px" %)Set the Application Key|(% style="width:350px" %)OK
337 337  
338 -
339 -
340 340  == 5.3 Application Session Key ==
341 341  
342 342  Feature: Get or Set the Application Session Key.
343 343  
344 -{{info}}
345 -**AT Command: AT+APPSKEY**
346 -{{/info}}
347 347  
346 +(% style="color:blue" %)**AT Command: AT+APPSKEY**
347 +
348 +
348 348  (% border="1" style="background-color:#ffffcc; color:green; width:1040.22px" %)
349 349  |=(% colspan="3" style="width: 1037px;" %)AT+APPSKEY
350 350  |(% style="width:451px" %)**Command Example**|(% style="width:231px" %)**Function**|(% style="width:354px" %)**Response**
... ... @@ -359,10 +359,10 @@
359 359  
360 360  Feature: Get or Set the Device Address.
361 361  
362 -{{info}}
363 -**AT Command: AT+DADDR**
364 -{{/info}}
365 365  
364 +(% style="color:blue" %)**AT Command: AT+DADDR**
365 +
366 +
366 366  (% border="1" style="background-color:#ffffcc; color:green; width:795.222px" %)
367 367  |=(% colspan="3" style="width: 792px;" %)AT+DADDR
368 368  |(% style="width:192px" %)**Command Example**|(% style="width:241px" %)**Function**|(% style="width:359px" %)**Response**
... ... @@ -377,10 +377,10 @@
377 377  
378 378  Feature: Get or Set the Device EUI.
379 379  
380 -{{info}}
381 -**AT Command: AT+DEUI**
382 -{{/info}}
383 383  
382 +(% style="color:blue" %)**AT Command: AT+DEUI**
383 +
384 +
384 384  (% border="1" style="background-color:#ffffcc; color:green; width:1035.22px" %)
385 385  |=(% colspan="3" style="width: 1032px;" %)AT+DEUI
386 386  |(% style="width:250px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:634px" %)**Response**
... ... @@ -395,10 +395,10 @@
395 395  
396 396  Feature: Get or Set the Network ID.(You can enter this command change only after successful network connection)
397 397  
398 -{{info}}
399 -**AT Command: AT+NWKID**
400 -{{/info}}
401 401  
400 +(% style="color:blue" %)**AT Command: AT+NWKID**
401 +
402 +
402 402  (% border="1" style="background-color:#ffffcc; color:green; width:448.222px" %)
403 403  |=(% colspan="3" style="width: 445px;" %)AT+NWKID
404 404  |(% style="width:191px" %)**Command Example**|(% style="width:153px" %)**Function**|(% style="width:101px" %)**Response**
... ... @@ -411,10 +411,10 @@
411 411  
412 412  Feature: Get or Set the Network Session Key
413 413  
414 -{{info}}
415 -**AT Command: AT+NWKSKEY**
416 -{{/info}}
417 417  
416 +(% style="color:blue" %)**AT Command: AT+NWKSKEY**
417 +
418 +
418 418  (% border="1" style="background-color:#ffffcc; color:green; width:1017.22px" %)
419 419  |=(% colspan="3" style="width: 1014px;" %)AT+NWKSKEY
420 420  |(% style="width:455px" %)**Command Example**|(% style="width:215px" %)**Function**|(% style="width:343px" %)**Response**
... ... @@ -427,12 +427,14 @@
427 427  
428 428  == 6.1 Confirm Mode ==
429 429  
431 +=== AT+CFM command before DR-LWS007 software stack ===
432 +
430 430  Feature: Get or Set the confirmation mode (0-1).
431 431  
432 -{{info}}
433 -**AT Command: AT+CFM**
434 -{{/info}}
435 435  
436 +(% style="color:blue" %)**AT Command: AT+CFM**
437 +
438 +
436 436  (% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
437 437  |=(% colspan="3" style="width: 707px;" %)AT+CFM
438 438  |(% style="width:155px" %)**Command Example**|(% style="width:205px" %)**Function**|(% style="width:346px" %)**Response**
... ... @@ -442,7 +442,7 @@
442 442  |(% style="width:155px" %)AT+CFM=1|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)OK
443 443  |(% style="width:155px" %)AT+CFM=2|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)While Error in format, return AT_PARAM_ERROR
444 444  
445 -Downlink Command: 0x05
448 +(% style="color:blue" %)**Downlink Command: 0x05**
446 446  
447 447  Format: Command Code (0x05) followed by 2 bytes mode value.
448 448  
... ... @@ -451,14 +451,62 @@
451 451  * Example 1: Downlink Payload: 0501 ~/~/ Set AT+CFM=1
452 452  * Example 2: Downlink Payload: 0500 ~/~/ Set AT+CFM=0
453 453  
457 +=== AT+CFM command since DR-LWS007 software stack ===
458 +
459 +
460 +(% style="color:blue" %)**AT Command: AT+CFM**
461 +
462 +
463 +(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
464 +|=(% colspan="3" style="width: 707px;" %)AT+CFM
465 +|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
466 +|(% style="width:160px" %)(((
467 +AT+CFM=1,0,0
468 +
469 +value1
470 +)))|(% style="width:198px" %)confirmed uplink|(% style="width:349px" %)(((
471 +1
472 +
473 +OK
474 +)))
475 +|(% style="width:160px" %)(((
476 +AT+CFM=0,?,0
477 +
478 +value2
479 +)))|(% style="width:198px" %)set max retry , range: 0 ~~ 7|(% style="width:349px" %)(((
480 +0~~7
481 +
482 +OK
483 +)))
484 +|(% style="width:160px" %)(((
485 +AT+CFM=0,0,1
486 +
487 +value3
488 +)))|(% style="width:198px" %)uplink fcnt increase by 1 for each retry|(% style="width:349px" %)(((
489 +1
490 +
491 +OK
492 +)))
493 +
494 +
495 +(% style="color:blue" %)**Downlink Command: 0x05**
496 +
497 +
498 +Format: Command Code (0x05) followed by 2 bytes mode value.
499 +
500 +If the downlink payload=05010101, it means set end node to use confirm mode, while type code is 05.
501 +
502 +* Example 1: Downlink Payload: 05010101 ~/~/ Set AT+CFM=1,1,1
503 +* Example 2: Downlink Payload: 05000700 ~/~/ Set AT+CFM=0,7,0
504 +
454 454  == 6.2 Confirm Status ==
455 455  
456 456  Feature: Get confirmation status of the last AT+SEND (0-1).
457 457  
458 -{{info}}
459 -**AT Command: AT+CFS**
460 -{{/info}}
461 461  
510 +(% style="color:blue" %)**AT Command: AT+CFS**
511 +
512 +
462 462  (% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
463 463  |=(% colspan="3" style="width: 531px;" %)AT+CFS
464 464  |(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:178px" %)**Response**
... ... @@ -470,10 +470,10 @@
470 470  
471 471  Feature: Join network.
472 472  
473 -{{info}}
474 -**AT Command: AT+JOIN**
475 -{{/info}}
476 476  
525 +(% style="color:blue" %)**AT Command: AT+JOIN**
526 +
527 +
477 477  (% border="1" style="background-color:#ffffcc; color:green; width:647.222px" %)
478 478  |=(% colspan="3" style="width: 644px;" %)AT+JOIN
479 479  |(% style="width:163px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:334px" %)**Response**
... ... @@ -487,10 +487,10 @@
487 487  
488 488  Feature: Get or Set the Network Join Mode. (0: ABP, 1: OTAA).
489 489  
490 -{{info}}
491 -**AT Command: AT+NJM**
492 -{{/info}}
493 493  
542 +(% style="color:blue" %)**AT Command: AT+NJM**
543 +
544 +
494 494  (% border="1" style="background-color:#ffffcc; color:green; width:753.222px" %)
495 495  |=(% colspan="3" style="width: 750px;" %)AT+NJM
496 496  |(% style="width:162px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:361px" %)**Response**
... ... @@ -500,15 +500,15 @@
500 500  |(% style="width:162px" %)AT+NJM=0|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)OK
501 501  |(% style="width:162px" %)AT+NJM=2|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)While Error in format, return AT_PARAM_ERROR
502 502  
503 -{{info}}
504 -**Downlink Command: 0x20**
505 -{{/info}}
506 506  
555 +(% style="color:blue" %)**Downlink Command: 0x20**
556 +
557 +
507 507  Format: Command Code (0x20) followed by 1 bytes mode value.
508 508  
509 509  If the downlink payload=2000, it means set the Network Join Mode, while type code is 20.
510 510  
511 -* **Example 1: **Downlink Payload: **2000** ~/~/ Set AT+NJM=O
562 +* **Example 1: **Downlink Payload: **2000** ~/~/ Set AT+NJM=0
512 512  * **Example 2:** Downlink Payload: **2001** ~/~/ Set AT+NJM=1
513 513  
514 514  == 6.5 LoRa® Network Join Status ==
... ... @@ -515,10 +515,10 @@
515 515  
516 516  Feature: LoRa® Network Join Status.
517 517  
518 -{{info}}
519 -**AT Command: AT+NJS**
520 -{{/info}}
521 521  
570 +(% style="color:blue" %)**AT Command: AT+NJS**
571 +
572 +
522 522  (% border="1" style="background-color:#ffffcc; color:green; width:498.222px" %)
523 523  |=(% colspan="3" style="width: 495px;" %)AT+NJS
524 524  |(% style="width:169px" %)**Command Example**|(% style="width:164px" %)**Function**|(% style="width:161px" %)**Response**
... ... @@ -530,10 +530,10 @@
530 530  
531 531  Feature: Print Last Received Data in Raw Format<port:data>.
532 532  
533 -{{info}}
534 -**AT Command: AT+RECV**
535 -{{/info}}
536 536  
585 +(% style="color:blue" %)**AT Command: AT+RECV**
586 +
587 +
537 537  (% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
538 538  |=(% colspan="3" style="width: 584px;" %)AT+RECV
539 539  |(% style="width:161px" %)**Command Example**|(% style="width:272px" %)**Function**|(% style="width:150px" %)**Response**
... ... @@ -545,10 +545,10 @@
545 545  
546 546  Feature: Print Last Received Data in Binary Format<port:data>.
547 547  
548 -{{info}}
549 -**AT Command: AT+RECVB**
550 -{{/info}}
551 551  
600 +(% style="color:blue" %)**AT Command: AT+RECVB**
601 +
602 +
552 552  (% border="1" style="background-color:#ffffcc; color:green; width:793.222px" %)
553 553  |=(% colspan="3" style="width: 790px;" %)AT+RECVB
554 554  |(% style="width:173px" %)**Command Example**|(% style="width:497px" %)**Function**|(% style="width:120px" %)**Response**
... ... @@ -560,10 +560,10 @@
560 560  
561 561  Feature: Send Text Data<port:data>.
562 562  
563 -{{info}}
564 -**AT Command: AT+SEND**
565 -{{/info}}
566 566  
615 +(% style="color:blue" %)**AT Command: AT+SEND**
616 +
617 +
567 567  (% border="1" style="background-color:#ffffcc; color:green; width:991.222px" %)
568 568  |=(% colspan="3" style="width: 988px;" %)AT+SEND
569 569  |(% style="width:201px" %)**Command Example**|(% style="width:340px" %)**Function**|(% style="width:446px" %)**Response**
... ... @@ -579,10 +579,10 @@
579 579  
580 580  Feature: Send hexadecimal data along with the application port.
581 581  
582 -{{info}}
583 -**AT Command: AT+SENDB**
584 -{{/info}}
585 585  
634 +(% style="color:blue" %)**AT Command: AT+SENDB**
635 +
636 +
586 586  (% border="1" style="background-color:#ffffcc; color:green; width:1120.22px" %)
587 587  |=(% colspan="3" style="width: 1117px;" %)AT+SENDB
588 588  |(% style="width:257px" %)**Command Example**|(% style="width:406px" %)**Function**|(% style="width:453px" %)**Response**
... ... @@ -599,10 +599,10 @@
599 599  
600 600  Feature: Get or Set the Adaptive Data Rate setting. (0: off, 1: on).
601 601  
602 -{{info}}
603 -**AT Command: AT+ADR**
604 -{{/info}}
605 605  
654 +(% style="color:blue" %)**AT Command: AT+ADR**
655 +
656 +
606 606  (% border="1" style="background-color:#ffffcc; color:green; width:683.222px" %)
607 607  |=(% colspan="3" style="width: 680px;" %)AT+ADR
608 608  |(% style="width:162px" %)**Command Example**|(% style="width:266px" %)**Function**|(% style="width:250px" %)**Response**
... ... @@ -614,11 +614,11 @@
614 614  AT_PARAM_ERROR
615 615  )))
616 616  
617 -{{info}}
618 -**Downlink Command: 0x22**
619 -{{/info}}
620 620  
669 +(% style="color:blue" %)**Downlink Command: 0x22**
621 621  
671 +
672 +
622 622  If the downlink payload=2201, it means setting the adaptive data rate to 1, while type code is 22.
623 623  
624 624  * **Example 1**: Downlink Payload: **2201** ~/~/ Set AT+ADR=1.
... ... @@ -628,10 +628,10 @@
628 628  
629 629  Feature: Get or Set the Device Class(Currently only support class A, class C).
630 630  
631 -{{info}}
632 -**AT Command:AT+CLASS**
633 -{{/info}}
634 634  
683 +(% style="color:blue" %)**AT Command:AT+CLASS**
684 +
685 +
635 635  (% border="1" style="background-color:#ffffcc; color:green; width:507.222px" %)
636 636  |=(% colspan="3" style="width: 504px;" %)AT+CLASS
637 637  |(% style="width:163px" %)**Command Example**|(% style="width:166px" %)**Function**|(% style="width:175px" %)**Response**
... ... @@ -646,10 +646,10 @@
646 646  
647 647  Feature: Get or Set the ETSI Duty Cycle setting - 0=disable, 1=enable - Only for testing.
648 648  
649 -{{info}}
650 -**AT Command:AT+DCS**
651 -{{/info}}
652 652  
701 +(% style="color:blue" %)**AT Command:AT+DCS**
702 +
703 +
653 653  (% border="1" style="background-color:#ffffcc; color:green; width:515.222px" %)
654 654  |=(% colspan="3" style="width: 512px;" %)AT+DCS
655 655  |(% style="width:165px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:107px" %)**Response**
... ... @@ -664,10 +664,10 @@
664 664  
665 665  Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) . Note: while set Data Rate, please use set Adptive Data Rate, ADR=0 first. otherwise device will response to server's ADR command and change the DR to the setting from server
666 666  
667 -{{info}}
668 -**AT Command: AT+DR**
669 -{{/info}}
670 670  
719 +(% style="color:blue" %)**AT Command: AT+DR**
720 +
721 +
671 671  (% border="1" style="background-color:#ffffcc; color:green; width:466.222px" %)
672 672  |=(% colspan="3" style="width: 463px;" %)AT+DR
673 673  |(% style="width:156px" %)**Command Example**|(% style="width:167px" %)**Function**|(% style="width:140px" %)**Response**
... ... @@ -678,11 +678,11 @@
678 678  
679 679  )))
680 680  
681 -{{info}}
682 -**Downlink Command: 0x2200aaFF**
683 -{{/info}}
684 684  
733 +(% style="color:blue" %)**Downlink Command: 0x2200aaFF**
685 685  
735 +
736 +
686 686  If the downlink payload=220001FF, it means setting the data rate to 1, while type code is 22 00 aa FF.
687 687  
688 688  * **Example 1**: Downlink Payload: **220001FF** ~/~/ Set AT+DR=1.
... ... @@ -692,10 +692,10 @@
692 692  
693 693  Feature: Get or Set the Frame Counter Downlink.
694 694  
695 -{{info}}
696 -**AT Command:AT+FCD**
697 -{{/info}}
698 698  
747 +(% style="color:blue" %)**AT Command:AT+FCD**
748 +
749 +
699 699  (% border="1" style="background-color:#ffffcc; color:green; width:693.222px" %)
700 700  |=(% colspan="3" style="width: 690px;" %)AT+FCD
701 701  |(% style="width:162px" %)**Command Example**|(% style="width:258px" %)**Function**|(% style="width:269px" %)**Response**
... ... @@ -712,10 +712,10 @@
712 712  
713 713  Feature: Get or Set the Frame Counter Uplink.
714 714  
715 -{{info}}
716 -**AT Command:AT+FCU**
717 -{{/info}}
718 718  
767 +(% style="color:blue" %)**AT Command:AT+FCU**
768 +
769 +
719 719  (% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
720 720  |=(% colspan="3" style="width: 531px;" %)AT+FCU
721 721  |(% style="width:177px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:113px" %)**Response**
... ... @@ -730,10 +730,10 @@
730 730  
731 731  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 1 in ms.
732 732  
733 -{{info}}
734 -**AT Command:AT+JN1DL**
735 -{{/info}}
736 736  
785 +(% style="color:blue" %)**AT Command:AT+JN1DL**
786 +
787 +
737 737  (% border="1" style="background-color:#ffffcc; color:green; width:537.222px" %)
738 738  |=(% colspan="3" style="width: 534px;" %)AT+JN1DL
739 739  |(% style="width:164px" %)**Command Example**|(% style="width:229px" %)**Function**|(% style="width:140px" %)**Response**
... ... @@ -748,10 +748,10 @@
748 748  
749 749  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 2 in ms.
750 750  
751 -{{info}}
752 -**AT Command:AT+JN2DL**
753 -{{/info}}
754 754  
803 +(% style="color:blue" %)**AT Command:AT+JN2DL**
804 +
805 +
755 755  (% border="1" style="background-color:#ffffcc; color:green; width:538.222px" %)
756 756  |=(% colspan="3" style="width: 535px;" %)AT+JN2DL
757 757  |(% style="width:160px" %)**Command Example**|(% style="width:228px" %)**Function**|(% style="width:146px" %)**Response**
... ... @@ -764,12 +764,14 @@
764 764  
765 765  == 7.9 Public Network Mode ==
766 766  
767 -Feature: Get or Set the public network mode. (0: off, 1: on)
818 +Feature: Get or Set the public network mode. (0: off, 1: on). A Public LoRaWAN network use 0x34 as syncword. Default Settings; PNM=1
768 768  
769 -{{info}}
770 -**AT Command:AT+PNM**
771 -{{/info}}
820 +Notice: If user build their own LoRaWAN server but still use syncword=0x34, this is still considered a public LoRaWAN network
772 772  
822 +
823 +(% style="color:blue" %)**AT Command:AT+PNM**
824 +
825 +
773 773  (% border="1" style="background-color:#ffffcc; color:green; width:667.222px" %)
774 774  |=(% colspan="3" style="width: 664px;" %)AT+PNM
775 775  |(% style="width:166px" %)**Command Example**|(% style="width:225px" %)**Function**|(% style="width:272px" %)**Response**
... ... @@ -776,20 +776,25 @@
776 776  |(% style="width:166px" %)AT+PNM=?|(% style="width:225px" %)Get the public network mode.|(% style="width:272px" %)1(((
777 777  OK
778 778  )))
779 -|(% style="width:166px" %)AT+PNM=1|(% style="width:225px" %)Set the public network mode.|(% style="width:272px" %)(System will write new value to PNM)(((
832 +|(% style="width:166px" %)AT+PNM=1|(% style="width:225px" %)(((
833 +Set the public network mode.
834 +
835 +Set syncword=0x34
836 +)))|(% style="width:272px" %)(System will write new value to PNM)(((
780 780  OK
781 781  
782 782  
783 783  )))
841 +|(% style="width:166px" %)AT+PNM=0|(% style="width:225px" %)Set to use private network autoset syncword=0x12|(% style="width:272px" %)
784 784  
785 785  == 7.10 Receive Delay1 ==
786 786  
787 787  Feature: Get or Set the delay between the end of the Tx and the Rx Window 1 in ms
788 788  
789 -{{info}}
790 -**AT Command:AT+RX1DL**
791 -{{/info}}
792 792  
848 +(% style="color:blue" %)**AT Command:AT+RX1DL**
849 +
850 +
793 793  (% border="1" style="background-color:#ffffcc; color:green; width:408.222px" %)
794 794  |=(% colspan="3" style="width: 405px;" %)AT+RX1DL
795 795  |(% style="width:155px" %)**Command Example**|(% style="width:128px" %)**Function**|(% style="width:122px" %)**Response**
... ... @@ -804,10 +804,10 @@
804 804  
805 805  Feature: Get or Set the delay between the end of the Tx and the Rx Window 2 in ms
806 806  
807 -{{info}}
808 -**AT Command:AT+RX2DL**
809 -{{/info}}
810 810  
866 +(% style="color:blue" %)**AT Command:AT+RX2DL**
867 +
868 +
811 811  (% border="1" style="background-color:#ffffcc; color:green; width:481.222px" %)
812 812  |=(% colspan="3" style="width: 478px;" %)AT+RX2DL
813 813  |(% style="width:175px" %)**Command Example**|(% style="width:152px" %)**Function**|(% style="width:150px" %)**Response**
... ... @@ -822,10 +822,10 @@
822 822  
823 823  Feature: Get or Set the Rx2 window data rate (0-7 corresponding to DR_X)
824 824  
825 -{{info}}
826 -**AT Command:AT+RX2DR**
827 -{{/info}}
828 828  
884 +(% style="color:blue" %)**AT Command:AT+RX2DR**
885 +
886 +
829 829  (% border="1" style="background-color:#ffffcc; color:green; width:525.222px" %)
830 830  |=(% colspan="3" style="width: 522px;" %)AT+RX2DR
831 831  |(% style="width:160px" %)**Command Example**|(% style="width:232px" %)**Function**|(% style="width:130px" %)**Response**
... ... @@ -840,10 +840,10 @@
840 840  
841 841  Feature: Get or Set the Rx2 window frequency
842 842  
843 -{{info}}
844 -**AT Command:AT+RX2FQ**
845 -{{/info}}
846 846  
902 +(% style="color:blue" %)**AT Command:AT+RX2FQ**
903 +
904 +
847 847  (% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
848 848  |=(% colspan="3" style="width: 584px;" %)AT+RX2FQ
849 849  |(% style="width:183px" %)**Command Example**|(% style="width:240px" %)**Function**|(% style="width:160px" %)**Response**
... ... @@ -858,10 +858,10 @@
858 858  
859 859  Feature: Get or Set the Transmit Power(0-5, MAX:0, MIN:5, according to LoRaWAN Spec, or 40=10dB, 41 = 11dB, …, 50 = 20dB which is out of LoRaWAN spec. )
860 860  
861 -{{info}}
862 -**AT Command:AT+TXP**
863 -{{/info}}
864 864  
920 +(% style="color:blue" %)**AT Command:AT+TXP**
921 +
922 +
865 865  (% border="1" style="background-color:#ffffcc; color:green; width:465.222px" %)
866 866  |=(% colspan="3" style="width: 462px;" %)AT+TXP
867 867  |(% style="width:161px" %)**Command Example**|(% style="width:189px" %)**Function**|(% style="width:112px" %)**Response**
... ... @@ -883,10 +883,10 @@
883 883  
884 884  Feature: Get or Set the Rx2 window frequency
885 885  
886 -{{info}}
887 -**AT Command:AT+RSSI**
888 -{{/info}}
889 889  
945 +(% style="color:blue" %)**AT Command:AT+RSSI**
946 +
947 +
890 890  (% border="1" style="background-color:#ffffcc; color:green; width:557.222px" %)
891 891  |=(% colspan="3" style="width: 554px;" %)AT+RSSI
892 892  |(% style="width:164px" %)**Command Example**|(% style="width:289px" %)**Function**|(% style="width:100px" %)**Response**
... ... @@ -898,10 +898,10 @@
898 898  
899 899  Feature: Get the SNR of the last received packet
900 900  
901 -{{info}}
902 -**AT Command:AT+SNR**
903 -{{/info}}
904 904  
960 +(% style="color:blue" %)**AT Command:AT+SNR**
961 +
962 +
905 905  (% border="1" style="background-color:#ffffcc; color:green; width:571.222px" %)
906 906  |=(% colspan="3" style="width: 568px;" %)AT+SNR
907 907  |(% style="width:164px" %)**Command Example**|(% style="width:290px" %)**Function**|(% style="width:113px" %)**Response**
... ... @@ -913,10 +913,10 @@
913 913  
914 914  Feature: Get or set the application port.
915 915  
916 -{{info}}
917 -**AT Command: AT+PORT**
918 -{{/info}}
919 919  
975 +(% style="color:blue" %)**AT Command: AT+PORT**
976 +
977 +
920 920  (% border="1" style="background-color:#ffffcc; color:green; width:500.222px" %)
921 921  |=(% colspan="3" style="width: 497px;" %)AT+PORT
922 922  |(% style="width:157px" %)**Command Example**|(% style="width:204px" %)**Function**|(% style="width:135px" %)**Response**
... ... @@ -1093,6 +1093,129 @@
1093 1093  * **Example 1**: Downlink Payload: **2101** ~/~/ set packet receiving response level to 1
1094 1094  * **Example 2**: Downlink Payload: **2102** ~/~/ set packet receiving response level to 2
1095 1095  
1154 +== 7.24 Controls NBTrans in unconfirmed uplink mode（LWS007 NBTrans:Set retransmission packets) ==
1155 +
1156 +{{info}}
1157 +**AT Command: AT+SETMAXNBTRANS **
1158 +{{/info}}
1159 +
1160 +(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1161 +|=(% colspan="3" style="width: 533px;" %)AT+**SETMAXNBTRANS**
1162 +|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1163 +|(% style="width:160px" %)**AT+SETMAXNBTRANS=1，0**|(% style="width:263px" %)Value1: set the maximum NBTrans.|(% style="width:109px" %)1(((
1164 +OK
1165 +)))
1166 +|(% style="width:160px" %)**AT+SETMAXNBTRANS=？，1**|(% style="width:263px" %)value2: 0: uplink fcnt doesn't change for each NBTrans; 1: uplink fcnt increase by 1 for each NBTrans.|(% style="width:109px" %)(((
1167 +1
1168 +
1169 +OK
1170 +)))
1171 +
1172 +{{info}}
1173 +**Downlink Command: 0x33**
1174 +{{/info}}
1175 +
1176 +Format: Command Code (0x33) followed by 2 bytes mode value.
1177 +
1178 +If the downlink payload=330100, it means set end node to use confirm mode, while type code is 33.
1179 +
1180 +* Example 1: Downlink Payload: 330100 ~/~/ Set AT+SETMAXNBTRANS=1,0
1181 +* Example 2: Downlink Payload: 330201 ~/~/ Set AT+SETMAXNBTRANS=2,1
1182 +
1183 +== 7.25 Device offline rejoining （LWS007) ==
1184 +
1185 +{{info}}
1186 +**AT Command: AT+DDETECT**
1187 +{{/info}}
1188 +
1189 +(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
1190 +|=(% colspan="3" style="width: 707px;" %)AT+**DDETECT**
1191 +|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
1192 +|(% style="width:160px" %)(((
1193 +AT+DDETECT=1,1440,2880
1194 +
1195 +value1
1196 +)))|(% style="width:198px" %)Enable online detect|(% style="width:349px" %)(((
1197 +1
1198 +
1199 +OK
1200 +)))
1201 +|(% style="width:160px" %)(((
1202 +AT+DDETECT=1,?,2880
1203 +
1204 +value2
1205 +)))|(% style="width:198px" %)Online detection packet sending time|(% style="width:349px" %)(((
1206 +
1207 +
1208 +OK
1209 +)))
1210 +|(% style="width:160px" %)(((
1211 +AT+DDETECT=1,1440,？
1212 +
1213 +value3
1214 +)))|(% style="width:198px" %)Process rejoin|(% style="width:349px" %)(((
1215 +
1216 +
1217 +OK
1218 +)))
1219 +
1220 +{{info}}
1221 +**Downlink Command: 0x33**
1222 +{{/info}}
1223 +
1224 +Format: Command Code (0x32) followed by 2 bytes mode value.
1225 +
1226 +If the downlink payload=320105A00B40, it means set end node to use confirm mode, while type code is 33.
1227 +
1228 +* Example 1: Downlink Payload: 320105A00B40 ~/~/ Set AT+DDETECT=1,1440,2880
1229 +
1230 +== 7.26 Request the server to send an ACK ==
1231 +
1232 +{{info}}
1233 +**AT Command: AT+PNACKMD**
1234 +{{/info}}
1235 +
1236 +(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1237 +|=(% colspan="3" style="width: 533px;" %)**AT+PNACKMD**
1238 +|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1239 +|(% style="width:160px" %)**AT+PNACKMD=1**|(% style="width:263px" %)If the node uploads the ACK as confirm, it will request the server to send an ACK. If the server ack is not received, the node will upload the packets that have not received the ACK the next time it receives the ACK|(% style="width:109px" %)1(((
1240 +OK
1241 +)))
1242 +|(% style="width:160px" %)**AT+PNACKMD=0**|(% style="width:263px" %)off request the server to send an ACK|(% style="width:109px" %)(((
1243 +0
1244 +
1245 +OK
1246 +)))
1247 +
1248 +== 7.27 Adjust network rejoining interval ==
1249 +
1250 +{{info}}
1251 +**AT Command: AT+RJTDC**
1252 +{{/info}}
1253 +
1254 +(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
1255 +|=(% colspan="3" style="width: 724px;" %)AT+RJTDC
1256 +|(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
1257 +|(% style="width:165px" %)AT+RJTDC=?|(% style="width:227px" %)Show the ReJoin data transmission interval in min|(% style="width:329px" %)30000(((
1258 +OK
1259 +
1260 +the interval is 30000ms = 30s
1261 +)))
1262 +|(% style="width:165px" %)AT+RJTDC=60000|(% style="width:227px" %)Set the ReJoin data transmission interval in min|(% style="width:329px" %)OK(((
1263 +Set the ReJoin data transmission interval to 60000ms = 60 seconds
1264 +)))
1265 +
1266 +{{info}}
1267 +**Downlink Command: 0x26**
1268 +{{/info}}
1269 +
1270 +Format: Command Code (0x26) followed by 2 bytes mode value.
1271 +
1272 +If the downlink payload=26000A, it means set end node to use confirm mode, while type code is 26.
1273 +
1274 +* Example 1: Downlink Payload: 26000A ~/~/ Set AT+RJTDC=10
1275 +* Example 2: Downlink Payload: 260002 ~/~/ Set AT+RJTDC=2
1276 +
1096 1096  = 8. AT Commands Combination =
1097 1097  
1098 1098  == 8.1 Set a fix RX2DR for downlink window ==
... ... @@ -1111,3 +1111,4 @@
1111 1111  * AT+ADR=0  [[Reference>>||anchor="H7.1AdaptiveDataRate"]]
1112 1112  * AT+DR=5  [[Reference>>||anchor="H7.4DataRate"]]
1113 1113  * AT+TXP=0  [[Reference>>||anchor="H7.14TransmitPower"]]
1295 +~)~)~)

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0