Changes for page End Device AT Commands and Downlink Command
Last modified by kai on 2024/09/06 10:00
Summary
-
Page properties (1 modified, 0 added, 0 removed)
-
Attachments (0 modified, 0 added, 2 removed)
Details
- Page properties
-
- Content
-
... ... @@ -1,4 +1,4 @@ 1 - **Contents：**1 +Contens 2 2 3 3 {{toc/}} 4 4 ... ... @@ -10,95 +10,34 @@ 10 10 * **Common Commands:** They should be available for each sensor, such as: change uplink interval, reset device. 11 11 * **Sensor Related Commands:** Only for special sensor, such as control relay, poll RS485 device. 12 12 13 -((( 14 14 **This page shows the common commands since Dragino LoRaWAN stack DR-LWS-005. Make sure the end node support stack higher than DR-LWS-005 before checking this page.** 15 15 16 -))) 17 17 18 18 = 2. How to use AT Commands or Downlink command = 19 19 20 20 * For AT Command , See Devices User Manual for Device. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]] 21 21 * For LoRaWAN Downlink: The gateway transfer downlink command in HEX format. This page shows the HEX format downlink code for each command. but some servers use base64 as downlink code. Below are reference for how to use downlink command: 22 -** Use HEX format to send a downlink: [[TTN v3>>doc :Main.Notes.WebHome]]23 -** Use Base64 format to send a downlink: [[Chirpstack>>doc :Main.Notes.WebHome]].24 -** See use note for more serves [[Servers Note>>doc :Main.WebHome]](IoT LoRaWANServer)20 +** Use HEX format to send a downlink: [[TTN v3>>url:https://wiki.dragino.com/index.php/Notes_for_TTN#Send_Downlink_message]] 21 +** Use Base64 format to send a downlink: [[Chirpstack>>url:https://wiki.dragino.com/index.php/Notes_for_ChirpStack#Downlink]]. 22 +** See use note for more serves [[Servers Note>>url:https://wiki.dragino.com/index.php/Main_Page#Use_Note_for_Server]] 25 25 26 - 27 27 = 3. Support End Node and firmware version = 28 28 29 -(% border="1" style="background-color:#ffffcc; color:green; width:966px" %) 30 -|=(% colspan="3" style="width: 963px;" %)((( 31 -Dragino STM32 base hardware Firmware / LoRaWAN stack list 32 -))) 33 -|(% style="width:187px" %)((( 34 -**Model** 35 -)))|(% style="width:330px" %)((( 36 -**Description** 37 -)))|(% style="width:445px" %)((( 38 -**Firmware Version <~-~-> Stack Version** 39 -))) 40 -|(% style="width:187px" %)((( 41 -[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]], 42 -)))|(% style="width:330px" %)((( 43 -Open Source Generic LoRaWAN Sensor Node 44 -)))|(% style="width:445px" %)((( 45 -((( 46 -LSN50 v1.6.0 <~-~-> DR-LWS-003; 47 -))) 48 - 49 -((( 50 -((( 26 +(% style="background-color:#ffffcc; color:green; width:995.222px" %) 27 +|=(% colspan="3" style="width: 992px;" %)Dragino STM32 base hardware Firmware / LoRaWAN stack list 28 +|(% style="width:187px" %)**Model**|(% style="width:349px" %)**Description**|(% style="width:453px" %)**Firmware Version <~-~-> Stack Version** 29 +|(% style="width:187px" %)[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],|(% style="width:349px" %)Open Source Generic LoRaWAN Sensor Node|(% style="width:453px" %)LSN50 v1.6.0 <~-~-> DR-LWS-003;((( 51 51 LSN50 v1.7.0 <~-~-> DR-LWS-005; ~-~-> Support since this version 52 52 ))) 53 -))) 54 -))) 55 -|(% style="width:187px" %)((( 56 -[[LGT92>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/142-lgt-92.html]], 57 -)))|(% style="width:330px" %)((( 58 -LoRaWAN GPS Tracker 59 -)))|(% style="width:445px" %)((( 60 -((( 61 -LGT92 v1.6.3 <~-~-> DR-LWS-003; 62 -))) 63 - 64 -((( 65 -((( 32 +|(% style="width:187px" %)[[LGT92>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/142-lgt-92.html]],|(% style="width:349px" %)LoRaWAN GPS Tracker|(% style="width:453px" %)LGT92 v1.6.3 <~-~-> DR-LWS-003;((( 66 66 LGT92 v1.6.4 <~-~-> DR-LWS-005;~-~-> Support since this version 67 67 ))) 68 -))) 69 -))) 70 -|(% style="width:187px" %)((( 71 -[[LBT1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/165-lbt1.html]], 72 -)))|(% style="width:330px" %)((( 73 -LoRaWAN BLE Indoor Tracker 74 -)))|(% style="width:445px" %)((( 75 -LBT1 v1.0 <~-~-> DR-LWS-005; 76 -))) 77 -|(% style="width:187px" %)((( 78 -[[RS485-LN>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/154-rs485-ln.html]], 79 -)))|(% style="width:330px" %)((( 80 -LoRaWAN RS485 Modbus Converter 81 -)))|(% style="width:445px" %)((( 82 -RS485-LN v1.3 <~-~-> DR-LWS-005; 83 -))) 84 -|(% style="width:187px" %)((( 85 -[[LHT65>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/151-lht65.html]], 86 -)))|(% style="width:330px" %)((( 87 -LoRaWAN Temperature & Humidity Sensor 88 -)))|(% style="width:445px" %)((( 89 -((( 90 -LHT65 v1.7 <~-~-> DR-LWS-003; 91 -))) 92 - 93 -((( 94 -((( 35 +|(% style="width:187px" %)[[LBT1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/165-lbt1.html]],|(% style="width:349px" %)LoRaWAN BLE Indoor Tracker|(% style="width:453px" %)LBT1 v1.0 <~-~-> DR-LWS-005; 36 +|(% style="width:187px" %)[[RS485-LN>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/154-rs485-ln.html]],|(% style="width:349px" %)LoRaWAN RS485 Modbus Converter|(% style="width:453px" %)RS485-LN v1.3 <~-~-> DR-LWS-005; 37 +|(% style="width:187px" %)[[LHT65>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/151-lht65.html]],|(% style="width:349px" %)LoRaWAN Temperature & Humidity Sensor|(% style="width:453px" %)LHT65 v1.7 <~-~-> DR-LWS-003;((( 95 95 LHT65 v1.8.0 <~-~-> DR-LWS-005;~-~-> Support since this version 96 96 ))) 97 -))) 98 -))) 99 99 100 - 101 - 102 102 = 4. System Management Commands = 103 103 104 104 == 4.1 Change Uplink Interval == ... ... @@ -110,7 +110,7 @@ 110 110 **AT Command: AT+TDC** 111 111 ))) 112 112 113 -(% border="1"style="background-color:#ffffcc; color:green; width:727.222px" %)52 +(% style="background-color:#ffffcc; color:green; width:727.222px" %) 114 114 |=(% colspan="3" style="width: 724px;" %)AT+TDC 115 115 |(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response** 116 116 |(% style="width:165px" %)AT+TDC=?|(% style="width:227px" %)Show current transmit Interval|(% style="width:329px" %)30000((( ... ... @@ -126,18 +126,13 @@ 126 126 **Downlink Command: 0x01** 127 127 {{/info}} 128 128 129 -((( 130 130 Format: Command Code (0x01) followed by 3 bytes time value. 131 -))) 132 132 133 -((( 134 134 If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01. 135 -))) 136 136 137 137 * **Example 1**: Downlink Payload:** 0100001E** ~/~/ Set Transmit Interval (TDC) = 30 seconds 138 138 * **Example 2**: Downlink Payload:** 0100003C** ~/~/ Set Transmit Interval (TDC) = 60 seconds 139 139 140 - 141 141 == 4.2 Reboot End Node == 142 142 143 143 Feature: Reboot End Node to perform a new OTAA or ABP Join. ... ... @@ -146,7 +146,7 @@ 146 146 **AT Command: ATZ** 147 147 {{/info}} 148 148 149 -(% border=" 1" style="background-color:#ffffcc; color:green; width:727.222px" %)83 +(% border="0" style="background-color:#ffffcc; color:green; width:727.222px" %) 150 150 |=(% colspan="3" %)ATZ: Trig a reset of the MCU 151 151 |**Command Example**|**Function**|**Response** 152 152 |ATZ|Reset MCU|((( ... ... @@ -167,16 +167,10 @@ 167 167 **Downlink Command: 0x04** 168 168 {{/info}} 169 169 170 -((( 171 171 Format: Command Code (0x04) followed by FF. 172 -))) 173 173 174 -((( 175 175 If the downlink payload=**04FF**, the end node will reboot. 176 176 177 - 178 -))) 179 - 180 180 == 4.3 Reset to factory Default == 181 181 182 182 Feature: Reset the parameters to Factory Default, factory default value depends on the firmware settings, the OTAA and ABP keys will reserve after this command. ... ... @@ -185,7 +185,7 @@ 185 185 **AT Command: AT+FDR** 186 186 {{/info}} 187 187 188 -(% border="1"style="background-color:#ffffcc; color:green; width:831.222px" %)116 +(% style="background-color:#ffffcc; color:green; width:831.222px" %) 189 189 |=(% colspan="3" style="width: 828px;" %)Reset to factory default 190 190 |(% style="width:181px" %)**Command Example**|(% style="width:181px" %)**Function**|(% style="width:465px" %)**Response** 191 191 |(% style="width:181px" %)AT+FDR|(% style="width:181px" %)Reset to factory default|(% style="width:465px" %)((( ... ... @@ -206,13 +206,9 @@ 206 206 **Downlink Command: 0x04** 207 207 {{/info}} 208 208 209 -((( 210 210 Format: Command Code (0x04) followed by FE. 211 -))) 212 212 213 -((( 214 214 If the downlink payload=**04FE**, Reset Parameters to Factory Default, Keys Reserve. 215 -))) 216 216 217 217 218 218 == 4.4 Show Firmware Version == ... ... @@ -223,10 +223,10 @@ 223 223 **AT Command: AT+VER** 224 224 {{/info}} 225 225 226 -(% border="1"style="background-color:#ffffcc; color:green; width:586px" %)227 -|=(% colspan="3" style="width: 583px;"%)AT+VER: Image Version and Frequency Band228 -| (% style="width:170px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:113px" %)**Response**229 -| (% style="width:170px" %)AT+VER=?|(% style="width:300px" %)Show Image version and Frequency Band|(% style="width:113px" %)(((150 +(% style="background-color:#ffffcc; color:green" %) 151 +|=(% colspan="3" %)AT+VER: Image Version and Frequency Band 152 +|**Command Example**|**Function**|**Response** 153 +|AT+VER=?|Show Image version and Frequency Band|((( 230 230 1.3 EU868 231 231 232 232 OK ... ... @@ -236,25 +236,17 @@ 236 236 **Downlink Command: 0x26 (Valid in 006 stack)** 237 237 {{/info}} 238 238 239 -((( 240 240 Downlink Format: 0x26 241 -))) 242 242 243 -((( 244 244 Device will reply with firmware version info, device info. frequency band info. detail please check device user manual. Total 5 bytes Example: If device is of firmware version 1.1.0 Upload: xx ~-~- yy ~-~- zz ~-~- 110 total 5 bytes 245 -))) 246 246 247 -((( 248 248 **xx: Software Type:** 249 -))) 250 250 251 251 * 0x00 01: LGT92 Version 252 252 * 0x00 02: LBT1 253 253 * 0x00 03: LSE01/LDDS75/LDDS20/LSPH01/LLMS01/LSNPK01 254 254 255 -((( 256 256 **yy: Frequency Band:** 257 -))) 258 258 259 259 * 0x01: EU868 260 260 * 0x02: US915 ... ... @@ -267,9 +267,7 @@ 267 267 * 0x09: AS923-2 268 268 * 0xa0: AS923-3 269 269 270 -((( 271 271 **zz: Subband** 272 -))) 273 273 274 274 firmware version: v1.1.0 ~-~-> 110 275 275 ... ... @@ -282,7 +282,7 @@ 282 282 **AT Command: AT+CFG** 283 283 {{/info}} 284 284 285 -(% border="1"style="background-color:#ffffcc; color:green; width:599.222px" %)199 +(% style="background-color:#ffffcc; color:green; width:599.222px" %) 286 286 |=(% colspan="3" style="width: 596px;" %)AT+CFG: Print all configurations 287 287 |(% style="width:160px" %)**Command Example**|(% style="width:154px" %)**Function**|(% style="width:280px" %)**Response** 288 288 |(% style="width:160px" %)AT+CFG|(% style="width:154px" %)Show all configures|(% style="width:280px" %)((( ... ... @@ -310,7 +310,7 @@ 310 310 **AT Command: AT+APPEUI** 311 311 {{/info}} 312 312 313 -(% border="1"style="background-color:#ffffcc; color:green; width:686.222px" %)227 +(% style="background-color:#ffffcc; color:green; width:686.222px" %) 314 314 |=(% colspan="3" style="width: 683px;" %)AT+APPEUI 315 315 |(% style="width:305px" %)**Command Example**|(% style="width:186px" %)**Function**|(% style="width:191px" %)**Response** 316 316 |(% style="width:305px" %)AT+APPEUI=?|(% style="width:186px" %)Get the Application EUI|(% style="width:191px" %)00 b3 d5 00 00 00 00 00((( ... ... @@ -318,7 +318,6 @@ 318 318 ))) 319 319 |(% style="width:305px" %)AT+APPEUI=00 b3 d5 7e f0 00 4d 34|(% style="width:186px" %)Set the Application EUI|(% style="width:191px" %)OK 320 320 321 - 322 322 == 5.2 Application Key == 323 323 324 324 Feature: Get or Set the Application Key. ... ... @@ -327,7 +327,7 @@ 327 327 **AT Command: AT+APPKEY** 328 328 {{/info}} 329 329 330 -(% border="1"style="background-color:#ffffcc; color:green; width:976.222px" %)243 +(% style="background-color:#ffffcc; color:green; width:976.222px" %) 331 331 |=(% colspan="3" style="width: 973px;" %)AT+APPKEY 332 332 |(% style="width:441px" %)**Command Example**|(% style="width:180px" %)**Function**|(% style="width:350px" %)**Response** 333 333 |(% style="width:441px" %)AT+APPKEY=?|(% style="width:180px" %)Get the Application Key|(% style="width:350px" %)00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35((( ... ... @@ -335,103 +335,77 @@ 335 335 ))) 336 336 |(% style="width:441px" %)AT+APPKEY=00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35|(% style="width:180px" %)Set the Application Key|(% style="width:350px" %)OK 337 337 338 - 339 339 == 5.3 Application Session Key == 340 340 341 341 Feature: Get or Set the Application Session Key. 342 342 343 -{{info}} 344 -**AT Command: AT+APPSKEY** 345 -{{/info}} 255 +AT Command: AT+APPSKEY 346 346 347 -(% border="1" style="background-color:#ffffcc; color:green; width:1040.22px" %) 348 -|=(% colspan="3" style="width: 1037px;" %)AT+APPSKEY 349 -|(% style="width:451px" %)**Command Example**|(% style="width:231px" %)**Function**|(% style="width:354px" %)**Response** 350 -|(% style="width:451px" %)AT+APPSKEY=?|(% style="width:231px" %)Get the Application Session Key|(% style="width:354px" %)00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2((( 257 +|=(% colspan="3" %)AT+APPSKEY 258 +|**Command Example**|**Function**|**Response** 259 +|AT+APPSKEY=?|Get the Application Session Key|00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2((( 351 351 OK 352 352 ))) 353 -| (% style="width:451px" %)AT+APPSKEY=00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2|(% style="width:231px" %)Set the Application Session Key|(% style="width:354px" %)(While Error in format, return AT_PARAM_ERROR)(((262 +|AT+APPSKEY=00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2|Set the Application Session Key.|(While Error in format, return AT_PARAM_ERROR)((( 354 354 OK 355 355 ))) 356 356 357 - 358 - 359 359 == 5.4 Device Address == 360 360 361 361 Feature: Get or Set the Device Address. 362 362 363 -{{info}} 364 -**AT Command: AT+DADDR** 365 -{{/info}} 270 +AT Command: AT+DADDR 366 366 367 -(% border="1" style="background-color:#ffffcc; color:green; width:795.222px" %) 368 -|=(% colspan="3" style="width: 792px;" %)AT+DADDR 369 -|(% style="width:192px" %)**Command Example**|(% style="width:241px" %)**Function**|(% style="width:359px" %)**Response** 370 -|(% style="width:192px" %)AT+DADDR=?|(% style="width:241px" %)Get the Application Session Key.|(% style="width:359px" %)(While Error in format, return AT_PARAM_ERROR)((( 272 +|=(% colspan="3" %)AT+DADDR 273 +|**Command Example**|**Function**|**Response** 274 +|AT+DADDR=?|Get the Application Session Key.|(While Error in format, return AT_PARAM_ERROR)((( 371 371 A8 40 41 FF 372 372 373 373 OK 374 374 ))) 375 -| (% style="width:192px" %)AT+DADDR=A8 40 41 FF|(% style="width:241px" %)Set the Application Session Key.|(% style="width:359px" %)OK279 +|AT+DADDR=A8 40 41 FF|Set the Application Session Key.|OK 376 376 377 - 378 - 379 379 == 5.5 Device EUI == 380 380 381 381 Feature: Get or Set the Device EUI. 382 382 383 -{{info}} 384 -**AT Command: AT+DEUI** 385 -{{/info}} 285 +AT Command: AT+DEUI 386 386 387 -(% border="1" style="background-color:#ffffcc; color:green; width:1035.22px" %) 388 -|=(% colspan="3" style="width: 1032px;" %)AT+DEUI 389 -|(% style="width:250px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:634px" %)**Response** 390 -|(% style="width:250px" %)AT+DEUI=?|(% style="width:147px" %)Get the Device EUI.|(% style="width:634px" %)00 44 34 22 33 45 55 55((( 287 +|=(% colspan="3" %)AT+DEUI 288 +|**Command Example**|**Function**|**Response** 289 +|AT+DEUI=?|Get the Device EUI.|00 44 34 22 33 45 55 55((( 391 391 OK 392 392 ))) 393 -| (% style="width:250px" %)AT+DEUI=A8 40 41 FF FF 12 34 56|(% style="width:147px" %)Set the Device EUI.|(% style="width:634px" %)(System will write new value to Device EUI,While Error in format, return AT_PARAM_ERROR)(((292 +|AT+DEUI=A8 40 41 FF FF 12 34 56|Set the Device EUI.|(System will write new value to Device EUI,While Error in format, return AT_PARAM_ERROR)((( 394 394 OK 395 395 ))) 396 396 397 - 398 - 399 399 == 5.6 Network ID == 400 400 401 401 Feature: Get or Set the Network ID.(You can enter this command change only after successful network connection) 402 402 403 -{{info}} 404 -**AT Command: AT+NWKID** 405 -{{/info}} 300 +AT Command: AT+NWKID 406 406 407 -(% border="1" style="background-color:#ffffcc; color:green; width:448.222px" %) 408 -|=(% colspan="3" style="width: 445px;" %)AT+NWKID 409 -|(% style="width:191px" %)**Command Example**|(% style="width:153px" %)**Function**|(% style="width:101px" %)**Response** 410 -|(% style="width:191px" %)AT+NWKID=?|(% style="width:153px" %)Get the Network ID.|(% style="width:101px" %)a8 40 41 ff((( 302 +|=(% colspan="3" %)AT+NWKID 303 +|**Command Example**|**Function**|**Response** 304 +|AT+NWKID=?|Get the Network ID.|a8 40 41 ff((( 411 411 OK 412 412 ))) 413 -| (% style="width:191px" %)AT+NWKID=A8 40 41 FF|(% style="width:153px" %)Set the Network ID.|(% style="width:101px" %)OK307 +|AT+NWKID=A8 40 41 FF|Set the Network ID.|OK 414 414 415 - 416 - 417 417 == 5.7 Network Session Key == 418 418 419 419 Feature: Get or Set the Network Session Key 420 420 421 -{{info}} 422 -**AT Command: AT+NWKSKEY** 423 -{{/info}} 313 +AT Command: AT+NWKSKEY 424 424 425 -(% border="1" style="background-color:#ffffcc; color:green; width:1017.22px" %) 426 -|=(% colspan="3" style="width: 1014px;" %)AT+NWKSKEY 427 -|(% style="width:455px" %)**Command Example**|(% style="width:215px" %)**Function**|(% style="width:343px" %)**Response** 428 -|(% style="width:455px" %)AT+NWKSKEY=?|(% style="width:215px" %)Get the Network Session Key.|(% style="width:343px" %)00 4f 19 25 52 ce 97 09 d7 fa 84 71 db 51 02 92((( 315 +|=(% colspan="3" %)AT+NWKSKEY 316 +|**Command Example**|**Function**|**Response** 317 +|AT+NWKSKEY=?|Get the Network Session Key.|00 4f 19 25 52 ce 97 09 d7 fa 84 71 db 51 02 92((( 429 429 OK 430 430 ))) 431 -| (% style="width:455px" %)AT+NWKSKEY=A8 40 41 FF FF 12 34 56 00 01 02 04 05 06 06 07|(% style="width:215px" %)Set the Network Session Key.|(% style="width:343px" %)OK320 +|AT+NWKSKEY=A8 40 41 FF FF 12 34 56 00 01 02 04 05 06 06 07|Set the Network Session Key.|OK 432 432 433 - 434 - 435 435 = 6. Joining and sending date on LoRaWAN network = 436 436 437 437 == 6.1 Confirm Mode == ... ... @@ -438,18 +438,15 @@ 438 438 439 439 Feature: Get or Set the confirmation mode (0-1). 440 440 441 -{{info}} 442 -**AT Command: AT+CFM** 443 -{{/info}} 328 +AT Command: AT+CFM 444 444 445 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %) 446 -|=(% colspan="3" style="width: 707px;" %)AT+CFM 447 -|(% style="width:155px" %)**Command Example**|(% style="width:205px" %)**Function**|(% style="width:346px" %)**Response** 448 -|(% style="width:155px" %)AT+CFM=?|(% style="width:205px" %)Get the confirmation mode|(% style="width:346px" %)0((( 330 +|=(% colspan="3" %)AT+CFM 331 +|**Command Example**|**Function**|**Response** 332 +|AT+CFM=?|Get the confirmation mode|0((( 449 449 OK 450 450 ))) 451 -| (% style="width:155px" %)AT+CFM=1|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)OK452 -| (% style="width:155px" %)AT+CFM=2|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)While Error in format, return AT_PARAM_ERROR335 +|AT+CFM=1|Set the confirmation mode|OK 336 +|AT+CFM=2|Set the confirmation mode|While Error in format, return AT_PARAM_ERROR 453 453 454 454 Downlink Command: 0x05 455 455 ... ... @@ -460,137 +460,100 @@ 460 460 * Example 1: Downlink Payload: 0501 ~/~/ Set AT+CFM=1 461 461 * Example 2: Downlink Payload: 0500 ~/~/ Set AT+CFM=0 462 462 463 - 464 - 465 465 == 6.2 Confirm Status == 466 466 467 467 Feature: Get confirmation status of the last AT+SEND (0-1). 468 468 469 -{{info}} 470 -**AT Command: AT+CFS** 471 -{{/info}} 351 +AT Command: AT+CFS 472 472 473 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %) 474 -|=(% colspan="3" style="width: 531px;" %)AT+CFS 475 -|(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:178px" %)**Response** 476 -|(% style="width:156px" %)AT+CFS=?|(% style="width:193px" %)Get confirmation status|(% style="width:178px" %)0((( 353 +|=(% colspan="3" %)AT+CFS 354 +|**Command Example**|**Function**|**Response** 355 +|AT+CFS=?|Get confirmation status|0((( 477 477 OK 478 478 ))) 479 479 480 - 481 - 482 482 == 6.3 Join LoRa® Network == 483 483 484 484 Feature: Join network. 485 485 486 -{{info}} 487 -**AT Command: AT+JOIN** 488 -{{/info}} 363 +AT Command: AT+JOIN 489 489 490 -(% border="1" style="background-color:#ffffcc; color:green; width:647.222px" %) 491 -|=(% colspan="3" style="width: 644px;" %)AT+JOIN 492 -|(% style="width:163px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:334px" %)**Response** 493 -|(% style="width:163px" %)AT+JOIN ?|(% style="width:147px" %)Get imformation.|(% style="width:334px" %)AT+JOIN: Join network((( 365 +|=(% colspan="3" %)AT+JOIN 366 +|**Command Example**|**Function**|**Response** 367 +|AT+JOIN ?|Get imformation.|AT+JOIN: Join network((( 494 494 OK 495 495 496 496 While Error in format, return AT_BUSY_ERROR 497 497 ))) 498 498 499 - 500 - 501 501 == 6.4 LoRa® Network Join Mode == 502 502 503 503 Feature: Get or Set the Network Join Mode. (0: ABP, 1: OTAA). 504 504 505 -{{info}} 506 -**AT Command: AT+NJM** 507 -{{/info}} 377 +AT Command: AT+NJM 508 508 509 -(% border="1" style="background-color:#ffffcc; color:green; width:753.222px" %) 510 -|=(% colspan="3" style="width: 750px;" %)AT+NJM 511 -|(% style="width:162px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:361px" %)**Response** 512 -|(% style="width:162px" %)AT+NJM=?|(% style="width:227px" %)Get the Network Join Mode|(% style="width:361px" %)1((( 379 +|=(% colspan="3" %)AT+NJM 380 +|**Command Example**|**Function**|**Response** 381 +|AT+NJM=?|Get the Network Join Mode|1((( 513 513 OK 514 514 ))) 515 -| (% style="width:162px" %)AT+NJM=0|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)OK516 -| (% style="width:162px" %)AT+NJM=2|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)While Error in format, return AT_PARAM_ERROR384 +|AT+NJM=0|Set the Network Join Mode|OK 385 +|AT+NJM=2|Set the Network Join Mode|While Error in format, return AT_PARAM_ERROR 517 517 518 -{{info}} 519 -**Downlink Command: 0x20** 520 -{{/info}} 387 +Downlink Command: 0x20 521 521 522 522 Format: Command Code (0x20) followed by 1 bytes mode value. 523 523 524 524 If the downlink payload=2000, it means set the Network Join Mode, while type code is 20. 525 525 526 -* **Example 1:**Downlink Payload:**2000**~/~/ Set AT+NJM=O527 -* **Example 2:**Downlink Payload:**2001**~/~/ Set AT+NJM=1393 +* Example 1: Downlink Payload: 2000 ~/~/ Set AT+NJM=O 394 +* Example 2: Downlink Payload: 2001 ~/~/ Set AT+NJM=1 528 528 529 - 530 - 531 531 == 6.5 LoRa® Network Join Status == 532 532 533 533 Feature: LoRa® Network Join Status. 534 534 535 -{{info}} 536 -**AT Command: AT+NJS** 537 -{{/info}} 400 +AT Command: AT+NJS 538 538 539 -(% border="1" style="background-color:#ffffcc; color:green; width:498.222px" %) 540 -|=(% colspan="3" style="width: 495px;" %)AT+NJS 541 -|(% style="width:169px" %)**Command Example**|(% style="width:164px" %)**Function**|(% style="width:161px" %)**Response** 542 -|(% style="width:169px" %)AT+NJS=?|(% style="width:164px" %)Get the join status.|(% style="width:161px" %)0((( 402 +|=(% colspan="3" %)AT+NJS 403 +|**Command Example**|**Function**|**Response** 404 +|AT+NJS=?|Get the join status.|0((( 543 543 OK 544 544 ))) 545 545 546 - 547 - 548 548 == 6.6 Print Last Received Data in Raw Format == 549 549 550 550 Feature: Print Last Received Data in Raw Format<port:data>. 551 551 552 -{{info}} 553 -**AT Command: AT+RECV** 554 -{{/info}} 412 +AT Command: AT+RECV 555 555 556 -(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %) 557 -|=(% colspan="3" style="width: 584px;" %)AT+RECV 558 -|(% style="width:161px" %)**Command Example**|(% style="width:272px" %)**Function**|(% style="width:150px" %)**Response** 559 -|(% style="width:161px" %)AT+RECV=?|(% style="width:272px" %)print last received data in raw format.|(% style="width:150px" %)0:((( 414 +|=(% colspan="3" %)AT+RECV 415 +|**Command Example**|**Function**|**Response** 416 +|AT+RECV=?|print last received data in raw format.|0:((( 560 560 OK 561 561 ))) 562 562 563 - 564 - 565 565 == 6.7 Print Last Received Data in Binary Format == 566 566 567 567 Feature: Print Last Received Data in Binary Format<port:data>. 568 568 569 -{{info}} 570 -**AT Command: AT+RECVB** 571 -{{/info}} 424 +AT Command: AT+RECVB 572 572 573 -(% border="1" style="background-color:#ffffcc; color:green; width:793.222px" %) 574 -|=(% colspan="3" style="width: 790px;" %)AT+RECVB 575 -|(% style="width:173px" %)**Command Example**|(% style="width:497px" %)**Function**|(% style="width:120px" %)**Response** 576 -|(% style="width:173px" %)AT+RECVB=?|(% style="width:497px" %)print last received data in binary format (with hexadecimal values).|(% style="width:120px" %)2: 0010((( 426 +|=(% colspan="3" %)AT+RECVB 427 +|**Command Example**|**Function**|**Response** 428 +|AT+RECVB=?|print last received data in binary format (with hexadecimal values).|2: 0010((( 577 577 OK 578 578 ))) 579 579 580 - 581 - 582 582 == 6.8 Send Text Data == 583 583 584 584 Feature: Send Text Data<port:data>. 585 585 586 -{{info}} 587 -**AT Command: AT+SEND** 588 -{{/info}} 436 +AT Command: AT+SEND 589 589 590 -(% border="1" style="background-color:#ffffcc; color:green; width:991.222px" %) 591 -|=(% colspan="3" style="width: 988px;" %)AT+SEND 592 -|(% style="width:201px" %)**Command Example**|(% style="width:340px" %)**Function**|(% style="width:446px" %)**Response** 593 -|(% style="width:201px" %)AT+SEND=12:hello world|(% style="width:340px" %)Send text data along with the application port.|(% style="width:446px" %)OK((( 438 +|=(% colspan="3" %)AT+SEND 439 +|**Command Example**|**Function**|**Response** 440 +|AT+SEND=12:hello world|Send text data along with the application port.|OK((( 594 594 While Error in format, return 595 595 596 596 AT_BUSY_ERROR/AT_BUSY_ERROR/AT_NO_NETWORK_JOINED ... ... @@ -598,28 +598,21 @@ 598 598 599 599 ))) 600 600 601 - 602 - 603 603 == 6.9 Send Hexadecimal Data == 604 604 605 605 Feature: Send hexadecimal data along with the application port. 606 606 607 -{{info}} 608 -**AT Command: AT+SENDB** 609 -{{/info}} 452 +AT Command: AT+SENDB 610 610 611 -(% border="1" style="background-color:#ffffcc; color:green; width:1120.22px" %) 612 -|=(% colspan="3" style="width: 1117px;" %)AT+SENDB 613 -|(% style="width:257px" %)**Command Example**|(% style="width:406px" %)**Function**|(% style="width:453px" %)**Response** 614 -|(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)OK 615 -|(% style="width:257px" %)AT+SENDB=abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)While Error in format, return((( 454 +|=(% colspan="3" %)AT+SENDB 455 +|**Command Example**|**Function**|**Response** 456 +|AT+SENDB=12:abcdef0123456789|Send hexadecimal data along with the application port.|OK 457 +|AT+SENDB=abcdef0123456789|Send hexadecimal data along with the application port.|While Error in format, return((( 616 616 AT_PARAM_ERROR AT_BUSY_ERROR/AT_NO_NETWORK_JOINED 617 617 618 618 619 619 ))) 620 620 621 - 622 - 623 623 = 7. LoRaWAN network management = 624 624 625 625 == 7.1 Adaptive Data Rate == ... ... @@ -626,302 +626,231 @@ 626 626 627 627 Feature: Get or Set the Adaptive Data Rate setting. (0: off, 1: on). 628 628 629 -{{info}} 630 -**AT Command: AT+ADR** 631 -{{/info}} 632 632 633 -(% border="1" style="background-color:#ffffcc; color:green; width:683.222px" %) 634 -|=(% colspan="3" style="width: 680px;" %)AT+ADR 635 -|(% style="width:162px" %)**Command Example**|(% style="width:266px" %)**Function**|(% style="width:250px" %)**Response** 636 -|(% style="width:162px" %)AT+ADR=?|(% style="width:266px" %)Get the Adaptive Data Rate setting.|(% style="width:250px" %)1((( 470 +AT Command: AT+ADR 471 + 472 +|=(% colspan="3" %)AT+ADR 473 +|**Command Example**|**Function**|**Response** 474 +|AT+ADR=?|Get the Adaptive Data Rate setting.|1((( 637 637 OK 638 638 ))) 639 -| (% style="width:162px" %)AT+ADR=0|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:250px" %)OK640 -| (% style="width:162px" %)AT+ADR=2|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:250px" %)While Error in format, return(((477 +|AT+ADR=0|Set the Adaptive Data Rate setting.|OK 478 +|AT+ADR=2|Set the Adaptive Data Rate setting.|While Error in format, return((( 641 641 AT_PARAM_ERROR 642 642 ))) 643 643 644 -{{info}} 645 -**Downlink Command: 0x22** 646 -{{/info}} 482 +Downlink Command: 0x22 647 647 648 648 649 649 If the downlink payload=2201, it means setting the adaptive data rate to 1, while type code is 22. 650 650 651 -* **Example 1**: Downlink Payload:**2201**~/~/ Set AT+ADR=1.652 -* **Example 2**: Downlink Payload:**2200FFFF**~/~/ Set AT+ADR=0.487 +* Example 1: Downlink Payload: 2201 ~/~/ Set AT+ADR=1. 488 +* Example 2: Downlink Payload: 2200FFFF ~/~/ Set AT+ADR=0. 653 653 654 - 655 - 656 656 == 7.2 LoRa® Class == 657 657 658 658 Feature: Get or Set the Device Class(Currently only support class A, class C). 659 659 660 -{{info}} 661 -**AT Command:AT+CLASS** 662 -{{/info}} 494 +AT Command:AT+CLASS 663 663 664 -(% border="1" style="background-color:#ffffcc; color:green; width:507.222px" %) 665 -|=(% colspan="3" style="width: 504px;" %)AT+CLASS 666 -|(% style="width:163px" %)**Command Example**|(% style="width:166px" %)**Function**|(% style="width:175px" %)**Response** 667 -|(% style="width:163px" %)AT+CLASS=?|(% style="width:166px" %)Get the Device Class.|(% style="width:175px" %)A((( 496 +|=(% colspan="3" %)AT+CLASS 497 +|**Command Example**|**Function**|**Response** 498 +|AT+CLASS=?|Get the Device Class.|A((( 668 668 OK 669 669 ))) 670 -| (% style="width:163px" %)AT+CLASS=C|(% style="width:166px" %)Set the Device Class.|(% style="width:175px" %)OK(((501 +|AT+CLASS=C|Set the Device Class.|OK((( 671 671 672 672 ))) 673 673 674 - 675 - 676 676 == 7.3 Duty Cycle Setting == 677 677 678 678 Feature: Get or Set the ETSI Duty Cycle setting - 0=disable, 1=enable - Only for testing. 679 679 680 -{{info}} 681 -**AT Command:AT+DCS** 682 -{{/info}} 509 +AT Command:AT+DCS 683 683 684 -(% border="1" style="background-color:#ffffcc; color:green; width:515.222px" %) 685 -|=(% colspan="3" style="width: 512px;" %)AT+DCS 686 -|(% style="width:165px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:107px" %)**Response** 687 -|(% style="width:165px" %)AT+DCS=?|(% style="width:239px" %)Get the ETSI Duty Cycle setting.|(% style="width:107px" %)1((( 511 +|=(% colspan="3" %)AT+DCS 512 +|**Command Example**|**Function**|**Response** 513 +|AT+DCS=?|Get the ETSI Duty Cycle setting.|1((( 688 688 OK 689 689 ))) 690 -| (% style="width:165px" %)AT+DCS=1|(% style="width:239px" %)Set the ETSI Duty Cycle setting.|(% style="width:107px" %)OK(((516 +|AT+DCS=1|Set the ETSI Duty Cycle setting.|OK((( 691 691 692 692 ))) 693 693 694 - 695 - 696 696 == 7.4 Data Rate == 697 697 698 698 Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) . Note: while set Data Rate, please use set Adptive Data Rate, ADR=0 first. otherwise device will response to server's ADR command and change the DR to the setting from server 699 699 700 -{{info}} 701 -**AT Command: AT+DR** 702 -{{/info}} 524 +AT Command: AT+DR 703 703 704 -(% border="1" style="background-color:#ffffcc; color:green; width:466.222px" %) 705 -|=(% colspan="3" style="width: 463px;" %)AT+DR 706 -|(% style="width:156px" %)**Command Example**|(% style="width:167px" %)**Function**|(% style="width:140px" %)**Response** 707 -|(% style="width:156px" %)AT+DR=?|(% style="width:167px" %)Get the Data Rate.|(% style="width:140px" %)5((( 526 +|=(% colspan="3" %)AT+DR 527 +|**Command Example**|**Function**|**Response** 528 +|AT+DR=?|Get the Data Rate.|5((( 708 708 OK 709 709 ))) 710 -| (% style="width:156px" %)AT+DR=2|(% style="width:167px" %)Set the Data Rate.|(% style="width:140px" %)OK(((531 +|AT+DR=2|Set the Data Rate.|OK((( 711 711 712 712 ))) 713 713 714 -{{info}} 715 -**Downlink Command: 0x2200aaFF** 716 -{{/info}} 535 +Downlink Command: 0x2200aaFF 717 717 718 718 719 719 If the downlink payload=220001FF, it means setting the data rate to 1, while type code is 22 00 aa FF. 720 720 721 -* **Example 1**: Downlink Payload:**220001FF**~/~/ Set AT+DR=1.722 -* **Example 2**: Downlink Payload:**220000FF**~/~/ Set AT+DR=0.540 +* Example 1: Downlink Payload: 220001FF ~/~/ Set AT+DR=1. 541 +* Example 2: Downlink Payload: 220000FF ~/~/ Set AT+DR=0. 723 723 724 - 725 - 726 726 == 7.5 Frame Counter Downlink == 727 727 728 728 Feature: Get or Set the Frame Counter Downlink. 729 729 730 -{{info}} 731 -**AT Command:AT+FCD** 732 -{{/info}} 547 +AT Command:AT+FCD 733 733 734 -(% border="1" style="background-color:#ffffcc; color:green; width:693.222px" %) 735 -|=(% colspan="3" style="width: 690px;" %)AT+FCD 736 -|(% style="width:162px" %)**Command Example**|(% style="width:258px" %)**Function**|(% style="width:269px" %)**Response** 737 -|(% style="width:162px" %)AT+FCD=?|(% style="width:258px" %)Get the Frame Counter Downlink.|(% style="width:269px" %)0((( 549 +|=(% colspan="3" %)AT+FCD 550 +|**Command Example**|**Function**|**Response** 551 +|AT+FCD=?|Get the Frame Counter Downlink.|0((( 738 738 OK 739 739 ))) 740 -| (% style="width:162px" %)AT+FCD=10|(% style="width:258px" %)Set the Frame Counter Downlink.|(% style="width:269px" %)(System will write new value to FCD)(((554 +|AT+FCD=10|Set the Frame Counter Downlink.|(System will write new value to FCD)((( 741 741 OK 742 742 743 743 744 744 ))) 745 745 746 - 747 - 748 748 == 7.6 Frame Counter Uplink == 749 749 750 750 Feature: Get or Set the Frame Counter Uplink. 751 751 752 -{{info}} 753 -**AT Command:AT+FCU** 754 -{{/info}} 564 +AT Command:AT+FCU 755 755 756 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %) 757 -|=(% colspan="3" style="width: 531px;" %)AT+FCU 758 -|(% style="width:177px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:113px" %)**Response** 759 -|(% style="width:177px" %)AT+FCU=?|(% style="width:239px" %)Get the Frame Counter Uplink.|(% style="width:113px" %)0((( 566 +|=(% colspan="3" %)AT+FCU 567 +|**Command Example**|**Function**|**Response** 568 +|AT+FCU=?|Get the Frame Counter Uplink.|0((( 760 760 OK 761 761 ))) 762 -| (% style="width:177px" %)AT+FCU=10|(% style="width:239px" %)Set the Frame Counter Uplink.|(% style="width:113px" %)OK(((571 +|AT+FCU=10|Set the Frame Counter Uplink.|OK((( 763 763 764 764 ))) 765 765 766 - 767 - 768 768 == 7.7 Join Accept Delay1 == 769 769 770 770 Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 1 in ms. 771 771 772 -{{info}} 773 -**AT Command:AT+JN1DL** 774 -{{/info}} 579 +AT Command:AT+JN1DL 775 775 776 -(% border="1" style="background-color:#ffffcc; color:green; width:537.222px" %) 777 -|=(% colspan="3" style="width: 534px;" %)AT+JN1DL 778 -|(% style="width:164px" %)**Command Example**|(% style="width:229px" %)**Function**|(% style="width:140px" %)**Response** 779 -|(% style="width:164px" %)AT+JN1DL=?|(% style="width:229px" %)Get the Join Accept Delay.|(% style="width:140px" %)5000((( 581 +|=(% colspan="3" %)AT+JN1DL 582 +|**Command Example**|**Function**|**Response** 583 +|AT+JN1DL=?|Get the Join Accept Delay.|5000((( 780 780 OK 781 781 ))) 782 -| (% style="width:164px" %)AT+JN1DL=10000|(% style="width:229px" %)Set the Join Accept Delay.|(% style="width:140px" %)OK(((586 +|AT+JN1DL=10000|Set the Join Accept Delay.|OK((( 783 783 784 784 ))) 785 785 786 - 787 - 788 788 == 7.8 Join Accept Delay2 == 789 789 790 790 Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 2 in ms. 791 791 792 -{{info}} 793 -**AT Command:AT+JN2DL** 794 -{{/info}} 594 +AT Command:AT+JN2DL 795 795 796 -(% border="1" style="background-color:#ffffcc; color:green; width:538.222px" %) 797 -|=(% colspan="3" style="width: 535px;" %)AT+JN2DL 798 -|(% style="width:160px" %)**Command Example**|(% style="width:228px" %)**Function**|(% style="width:146px" %)**Response** 799 -|(% style="width:160px" %)AT+JN2DL=?|(% style="width:228px" %)Get the Join Accept Delay.|(% style="width:146px" %)6000((( 596 +|=(% colspan="3" %)AT+JN2DL 597 +|**Command Example**|**Function**|**Response** 598 +|AT+JN2DL=?|Get the Join Accept Delay.|6000((( 800 800 OK 801 801 ))) 802 -| (% style="width:160px" %)AT+JN2DL=20000|(% style="width:228px" %)Set the Join Accept Delay.|(% style="width:146px" %)OK(((601 +|AT+JN2DL=20000|Set the Join Accept Delay.|OK((( 803 803 804 804 ))) 805 805 806 - 807 - 808 808 == 7.9 Public Network Mode == 809 809 810 810 Feature: Get or Set the public network mode. (0: off, 1: on) 811 811 812 -{{info}} 813 -**AT Command:AT+PNM** 814 -{{/info}} 609 +AT Command:AT+PNM 815 815 816 -(% border="1" style="background-color:#ffffcc; color:green; width:667.222px" %) 817 -|=(% colspan="3" style="width: 664px;" %)AT+PNM 818 -|(% style="width:166px" %)**Command Example**|(% style="width:225px" %)**Function**|(% style="width:272px" %)**Response** 819 -|(% style="width:166px" %)AT+PNM=?|(% style="width:225px" %)Get the public network mode.|(% style="width:272px" %)1((( 611 +|=(% colspan="3" %)AT+PNM 612 +|**Command Example**|**Function**|**Response** 613 +|AT+PNM=?|Get the public network mode.|1((( 820 820 OK 821 821 ))) 822 -| (% style="width:166px" %)AT+PNM=1|(% style="width:225px" %)Set the public network mode.|(% style="width:272px" %)(System will write new value to PNM)(((616 +|AT+PNM=1|Set the public network mode.|(System will write new value to PNM)((( 823 823 OK 824 824 825 825 826 826 ))) 827 827 828 - 829 - 830 830 == 7.10 Receive Delay1 == 831 831 832 832 Feature: Get or Set the delay between the end of the Tx and the Rx Window 1 in ms 833 833 834 -{{info}} 835 -**AT Command:AT+RX1DL** 836 -{{/info}} 626 +AT Command:AT+RX1DL 837 837 838 -(% border="1" style="background-color:#ffffcc; color:green; width:408.222px" %) 839 -|=(% colspan="3" style="width: 405px;" %)AT+RX1DL 840 -|(% style="width:155px" %)**Command Example**|(% style="width:128px" %)**Function**|(% style="width:122px" %)**Response** 841 -|(% style="width:155px" %)AT+RX1DL=?|(% style="width:128px" %)Get the delay.|(% style="width:122px" %)1000((( 628 +|=(% colspan="3" %)AT+RX1DL 629 +|**Command Example**|**Function**|**Response** 630 +|AT+RX1DL=?|Get the delay.|1000((( 842 842 OK 843 843 ))) 844 -| (% style="width:155px" %)AT+RX1DL=1500|(% style="width:128px" %)Set the delay.|(% style="width:122px" %)OK(((633 +|AT+RX1DL=1500|Set the delay.|OK((( 845 845 846 846 ))) 847 847 637 +== 7.11Receive Delay2 == 848 848 849 - 850 -== 7.11 Receive Delay2 == 851 - 852 852 Feature: Get or Set the delay between the end of the Tx and the Rx Window 2 in ms 853 853 854 -{{info}} 855 -**AT Command:AT+RX2DL** 856 -{{/info}} 641 +AT Command:AT+RX2DL 857 857 858 -(% border="1" style="background-color:#ffffcc; color:green; width:481.222px" %) 859 -|=(% colspan="3" style="width: 478px;" %)AT+RX2DL 860 -|(% style="width:175px" %)**Command Example**|(% style="width:152px" %)**Function**|(% style="width:150px" %)**Response** 861 -|(% style="width:175px" %)AT+RX2DL=?|(% style="width:152px" %)Get the delay.|(% style="width:150px" %)2000((( 643 +|=(% colspan="3" %)AT+RX2DL 644 +|**Command Example**|**Function**|**Response** 645 +|AT+RX2DL=?|Get the delay.|2000((( 862 862 OK 863 863 ))) 864 -| (% style="width:175px" %)AT+RX2DL=2500|(% style="width:152px" %)Set the delay.|(% style="width:150px" %)OK(((648 +|AT+RX2DL=2500|Set the delay.|OK((( 865 865 866 866 ))) 867 867 868 - 869 - 870 870 == 7.12 Rx2 Window Data Rate == 871 871 872 872 Feature: Get or Set the Rx2 window data rate (0-7 corresponding to DR_X) 873 873 874 -{{info}} 875 -**AT Command:AT+RX2DR** 876 -{{/info}} 656 +AT Command:AT+RX2DR 877 877 878 -(% border="1" style="background-color:#ffffcc; color:green; width:525.222px" %) 879 -|=(% colspan="3" style="width: 522px;" %)AT+RX2DR 880 -|(% style="width:160px" %)**Command Example**|(% style="width:232px" %)**Function**|(% style="width:130px" %)**Response** 881 -|(% style="width:160px" %)AT+RX2DR=?|(% style="width:232px" %)Get the Rx2 window data rate.|(% style="width:130px" %)2((( 658 +|=(% colspan="3" %)AT+RX2DR 659 +|**Command Example**|**Function**|**Response** 660 +|AT+RX2DR=?|Get the Rx2 window data rate.|2((( 882 882 OK 883 883 ))) 884 -| (% style="width:160px" %)AT+RX2DR=6|(% style="width:232px" %)Set the Rx2 window data rate.|(% style="width:130px" %)OK(((663 +|AT+RX2DR=6|Set the Rx2 window data rate.|OK((( 885 885 886 886 ))) 887 887 888 - 889 - 890 890 == 7.13 Rx2 Window Frequency == 891 891 892 892 Feature: Get or Set the Rx2 window frequency 893 893 894 -{{info}} 895 -**AT Command:AT+RX2FQ** 896 -{{/info}} 671 +AT Command:AT+RX2FQ 897 897 898 -(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %) 899 -|=(% colspan="3" style="width: 584px;" %)AT+RX2FQ 900 -|(% style="width:183px" %)**Command Example**|(% style="width:240px" %)**Function**|(% style="width:160px" %)**Response** 901 -|(% style="width:183px" %)AT+RX2FQ=?|(% style="width:240px" %)Get the Rx2 window frequency.|(% style="width:160px" %)434665000((( 673 +|=(% colspan="3" %)AT+RX2FQ 674 +|**Command Example**|**Function**|**Response** 675 +|AT+RX2FQ=?|Get the Rx2 window frequency.|434665000((( 902 902 OK 903 903 ))) 904 -| (% style="width:183px" %)AT+RX2FQ=434665000|(% style="width:240px" %)Set the Rx2 window frequency.|(% style="width:160px" %)OK(((678 +|AT+RX2FQ=434665000|Set the Rx2 window frequency.|OK((( 905 905 906 906 ))) 907 907 908 - 909 - 910 910 == 7.14 Transmit Power == 911 911 912 912 Feature: Get or Set the Transmit Power(0-5, MAX:0, MIN:5, according to LoRaWAN Spec, or 40=10dB, 41 = 11dB, …, 50 = 20dB which is out of LoRaWAN spec. ) 913 913 914 -{{info}} 915 -**AT Command:AT+TXP** 916 -{{/info}} 686 +AT Command:AT+TXP 917 917 918 -(% border="1" style="background-color:#ffffcc; color:green; width:465.222px" %) 919 -|=(% colspan="3" style="width: 462px;" %)AT+TXP 920 -|(% style="width:161px" %)**Command Example**|(% style="width:189px" %)**Function**|(% style="width:112px" %)**Response** 921 -|(% style="width:161px" %)AT+TXP=?|(% style="width:189px" %)Get the Transmit Power.|(% style="width:112px" %)0((( 688 +|=(% colspan="3" %)AT+TXP 689 +|**Command Example**|**Function**|**Response** 690 +|AT+TXP=?|Get the Transmit Power.|0((( 922 922 OK 923 923 ))) 924 -| (% style="width:161px" %)AT+TXP=1|(% style="width:189px" %)Set the Transmit Power.|(% style="width:112px" %)OK(((693 +|AT+TXP=1|Set the Transmit Power.|OK((( 925 925 926 926 ))) 927 927 ... ... @@ -929,198 +929,146 @@ 929 929 930 930 If the downlink payload=22000100, it means setting the TXP to 0. 931 931 932 -* **Example 1**: Downlink Payload:**22000102**~/~/ Set AT+TXP=2.933 -* **Example 2**: Downlink Payload:**220000FF**~/~/ Set AT+TXP=0.701 +* Example 1: Downlink Payload: 22000102 ~/~/ Set AT+TXP=2. 702 +* Example 2: Downlink Payload: 220000FF ~/~/ Set AT+TXP=0. 934 934 935 - 936 - 937 937 == 7.15 RSSI of the Last Received Packet == 938 938 939 939 Feature: Get or Set the Rx2 window frequency 940 940 941 -{{info}} 942 -**AT Command:AT+RSSI** 943 -{{/info}} 708 +AT Command:AT+RSSI 944 944 945 -(% border="1" style="background-color:#ffffcc; color:green; width:557.222px" %) 946 -|=(% colspan="3" style="width: 554px;" %)AT+RSSI 947 -|(% style="width:164px" %)**Command Example**|(% style="width:289px" %)**Function**|(% style="width:100px" %)**Response** 948 -|(% style="width:164px" %)AT+RSSI=?|(% style="width:289px" %)Get the RSSI of the last received packet.|(% style="width:100px" %)0((( 710 +|=(% colspan="3" %)AT+RSSI 711 +|**Command Example**|**Function**|**Response** 712 +|AT+RSSI=?|Get the RSSI of the last received packet.|0((( 949 949 OK 950 950 ))) 951 951 952 - 953 - 954 954 == 7.16 SNR of the Last Received Packet == 955 955 956 956 Feature: Get the SNR of the last received packet 957 957 958 -{{info}} 959 -**AT Command:AT+SNR** 960 -{{/info}} 720 +AT Command:AT+SNR 961 961 962 -(% border="1" style="background-color:#ffffcc; color:green; width:571.222px" %) 963 -|=(% colspan="3" style="width: 568px;" %)AT+SNR 964 -|(% style="width:164px" %)**Command Example**|(% style="width:290px" %)**Function**|(% style="width:113px" %)**Response** 965 -|(% style="width:164px" %)AT+SNR=?|(% style="width:290px" %)Get the RSSI of the last received packet.|(% style="width:113px" %)0((( 722 +|=(% colspan="3" %)AT+SNR 723 +|**Command Example**|**Function**|**Response** 724 +|AT+SNR=?|Get the RSSI of the last received packet.|0((( 966 966 OK 967 967 ))) 968 968 969 - 970 - 971 971 == 7.17 Application Port == 972 972 973 973 Feature: Get or set the application port. 974 974 975 -{{info}} 976 -**AT Command: AT+PORT** 977 -{{/info}} 732 +AT Command: AT+PORT 978 978 979 -(% border="1" style="background-color:#ffffcc; color:green; width:500.222px" %) 980 -|=(% colspan="3" style="width: 497px;" %)AT+PORT 981 -|(% style="width:157px" %)**Command Example**|(% style="width:204px" %)**Function**|(% style="width:135px" %)**Response** 982 -|(% style="width:157px" %)AT+PORT=?|(% style="width:204px" %)Get the application port|(% style="width:135px" %)21((( 734 +|=(% colspan="3" %)AT+PORT 735 +|**Command Example**|**Function**|**Response** 736 +|AT+PORT=?|Get the application port|21((( 983 983 OK 984 984 ))) 985 -| (% style="width:157px" %)AT+PORT=21|(% style="width:204px" %)Set the application port|(% style="width:135px" %)OK739 +|AT+PORT=21|Set the application port|OK 986 986 987 -{{info}} 988 -**Downlink Command: 0x23** 989 -{{/info}} 741 +Downlink Command: 0x23 990 990 991 991 Format: Command Code (0x23) followed by 1 bytes port value. 992 992 993 993 If the downlink payload=2301, it means set the application port to 1, while type code is 23. 994 994 995 -* **Example 1**: Downlink Payload:**2301**~/~/ set the application port to 1996 -* **Example 2**: Downlink Payload:**2305**~/~/ set the application port to 5747 +* Example 1: Downlink Payload: 2301 ~/~/ set the application port to 1 748 +* Example 2: Downlink Payload: 2305 ~/~/ set the application port to 5 997 997 998 - 999 - 1000 1000 == 7.18 Single Channel Mode == 1001 1001 1002 1002 Feature:Get or Set Frequency (Unit: Hz) for Single Channel Mode. 1003 1003 1004 -{{info}} 1005 -**AT Command: AT+CHS** 1006 -{{/info}} 754 +AT Command: AT+CHS 1007 1007 1008 -(% border="1" style="background-color:#ffffcc; color:green; width:603.222px" %) 1009 -|=(% colspan="3" style="width: 600px;" %)AT+CHS 1010 -|(% style="width:182px" %)**Command Example**|(% style="width:295px" %)**Function**|(% style="width:122px" %)**Response** 1011 -|(% style="width:182px" %)AT+CHS=?|(% style="width:295px" %)Get Frequency for Single Channel Mode|(% style="width:122px" %)0((( 756 +|=(% colspan="3" %)AT+CHS 757 +|**Command Example**|**Function**|**Response** 758 +|AT+CHS=?|Get Frequency for Single Channel Mode|0((( 1012 1012 OK 1013 1013 ))) 1014 -| (% style="width:182px" %)AT+CHS=868100000|(% style="width:295px" %)Set Frequency for Single Channel Mode|(% style="width:122px" %)OK761 +|AT+CHS=868100000|Set Frequency for Single Channel Mode|OK 1015 1015 1016 - 1017 - 1018 1018 == 7.19 Eight Channel Mode == 1019 1019 1020 1020 Feature: Get or Set eight channels mode,Only for US915,AU915,CN470. 1021 1021 1022 -{{info}} 1023 -**AT Command: AT+CHE** 1024 -{{/info}} 767 +AT Command: AT+CHE 1025 1025 1026 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %) 1027 -|=(% colspan="3" style="width: 707px;" %)AT+CHE 1028 -|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response** 1029 -|(% style="width:160px" %)AT+CHE=?|(% style="width:198px" %)Get eight channels mode|(% style="width:349px" %)1((( 769 +|=(% colspan="3" %)AT+CHE 770 +|**Command Example**|**Function**|**Response** 771 +|AT+CHE=?|Get eight channels mode|1((( 1030 1030 902.3 902.5 902.7 902.9 903.1 903.3 903.5 903.7 1031 1031 1032 1032 OK 1033 1033 ))) 1034 -| (% style="width:160px" %)AT+CHE=1|(% style="width:198px" %)Set eight channels mode|(% style="width:349px" %)OK776 +|AT+CHE=1|Set eight channels mode|OK 1035 1035 1036 -{{info}} 1037 -**Downlink Command: 0x24** 1038 -{{/info}} 778 +Downlink Command: 0x24 1039 1039 1040 1040 Format: Command Code (0x24) followed by 1 bytes channel value. 1041 1041 1042 1042 If the downlink payload=2401, it means set channel mode to 1, while type code is 24. 1043 1043 1044 -* **Example 1**: Downlink Payload: 2401 ~/~/ set channel mode to 11045 -* **Example 2**: Downlink Payload: 2405 ~/~/ set channel mode to 5784 +* Example 1: Downlink Payload: 2401 ~/~/ set channel mode to 1 785 +* Example 2: Downlink Payload: 2405 ~/~/ set channel mode to 5 1046 1046 1047 - 1048 - 1049 1049 == 7.20 Get or Set RXwindows1 timeout == 1050 1050 1051 1051 Feature:Get or Set the number of symbols to detect and timeout from RXwindow1(0 to 255). 1052 1052 1053 -{{info}} 1054 -**AT Command: AT+RX1WTO** 1055 -{{/info}} 791 +AT Command: AT+RX1WTO 1056 1056 1057 -(% border="1" style="background-color:#ffffcc; color:green; width:460.222px" %) 1058 -|=(% colspan="3" style="width: 457px;" %)AT+ RX1WTO 1059 -|(% style="width:163px" %)**Command Example**|(% style="width:201px" %)**Function**|(% style="width:93px" %)**Response** 1060 -|(% style="width:163px" %)AT+RX1WTO=?|(% style="width:201px" %)Get RXwindows1 timeout|(% style="width:93px" %)14((( 793 +|=(% colspan="3" %)AT+ RX1WTO 794 +|**Command Example**|**Function**|**Response** 795 +|AT+RX1WTO=?|Get RXwindows1 timeout|14((( 1061 1061 OK 1062 1062 ))) 1063 -| (% style="width:163px" %)AT+RX1WTO=60|(% style="width:201px" %)Set RXwindows1 timeout|(% style="width:93px" %)OK798 +|AT+RX1WTO=60|Set RXwindows1 timeout|OK 1064 1064 1065 -((( 1066 -**AT+RX1TWO** is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph. 1067 -))) 800 +AT+RX1TWO is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph. 1068 1068 1069 -[[image:image -20220526162535-1.png]]802 +[[~[~[image:https://wiki.dragino.com/images/thumb/5/51/RX1WTO.JPG/600px-RX1WTO.JPG~|~|alt="RX1WTO.JPG" height="239" width="600"~]~]>>url:https://wiki.dragino.com/index.php/File:RX1WTO.JPG]] 1070 1070 1071 -((( 1072 1072 Increasing thisvalue is equal to extending the time that the receiving window is opened, butthe corresponding power consumption will also increase. Properly increasingthis value can increase the success rate of the downlink. 1073 1073 1074 - 1075 -))) 1076 - 1077 1077 == 7.21 Get or Set RXwindows2 timeout == 1078 1078 1079 1079 Feature:Get or Set the number of symbols to detect and timeout from RXwindow2(0 to 255). 1080 1080 1081 -{{info}} 1082 -**AT Command: AT+RX2WTO** 1083 -{{/info}} 810 +AT Command: AT+RX2WTO 1084 1084 1085 -(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %) 1086 -|=(% colspan="3" style="width: 494px;" %)AT+ RX2WTO 1087 -|(% style="width:190px" %)**Command Example**|(% style="width:199px" %)**Function**|(% style="width:104px" %)**Response** 1088 -|(% style="width:190px" %)AT+RX2WTO=?|(% style="width:199px" %)Get RXwindows2 timeout|(% style="width:104px" %)7((( 812 +|=(% colspan="3" %)AT+ RX2WTO 813 +|**Command Example**|**Function**|**Response** 814 +|AT+RX2WTO=?|Get RXwindows2 timeout|7((( 1089 1089 OK 1090 1090 ))) 1091 -| (% style="width:190px" %)AT+RX2WTO=20|(% style="width:199px" %)Set RXwindows2 timeout|(% style="width:104px" %)OK817 +|AT+RX2WTO=20|Set RXwindows2 timeout|OK 1092 1092 1093 - 1094 - 1095 1095 == 7.22 Setting up uplinkdwelltime (as923, au915) == 1096 1096 1097 1097 Feature: Get or Set uplinkdwelltime 1098 1098 1099 -{{info}} 1100 -**AT Command: AT+DWELLT** 1101 -{{/info}} 823 +AT Command: AT+DWELLT 1102 1102 1103 -(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %) 1104 -|=(% colspan="3" style="width: 494px;" %)AT+DWELLT 1105 -|(% style="width:183px" %)**Command Example**|(% style="width:179px" %)**Function**|(% style="width:131px" %)**Response** 1106 -|(% style="width:183px" %)AT+DWELLT=?|(% style="width:179px" %)Get uplinkdwelltime|(% style="width:131px" %)1((( 825 +|=(% colspan="3" %)AT+DWELLT 826 +|**Command Example**|**Function**|**Response** 827 +|AT+DWELLT=?|Get uplinkdwelltime|1((( 1107 1107 OK 1108 1108 ))) 1109 -| (% style="width:183px" %)AT+DWELLT=0|(% style="width:179px" %)Set uplinkdwelltime|(% style="width:131px" %)OK830 +|AT+DWELLT=0|Set uplinkdwelltime|OK 1110 1110 1111 -{{info}} 1112 -**Downlink Command: 0x25** 1113 -{{/info}} 832 +Downlink Command: 0x25 1114 1114 1115 1115 Format: Command Code (0x25) followed by 1 bytes state value. 1116 1116 1117 1117 If the downlink payload=2501, it means set uplinkdwelltime to 1, while type code is 25. 1118 1118 1119 -* **Example 1**: Downlink Payload:**2501**~/~/ set uplinkdwelltime to 11120 -* **Example 2**: Downlink Payload:**2500**~/~/ set uplinkdwelltime to 0838 +* Example 1: Downlink Payload: 2501 ~/~/ set uplinkdwelltime to 1 839 +* Example 2: Downlink Payload: 2500 ~/~/ set uplinkdwelltime to 0 1121 1121 1122 - 1123 - 1124 1124 == 7.23 Set Packet Receiving Response Level == 1125 1125 1126 1126 Feature: Get or Set packet receiving response level. This feature is used to set compatible with different LoRaWAN servers. If RPL doesn;t match , user will see strange message in the server portal. ... ... @@ -1127,11 +1127,11 @@ 1127 1127 1128 1128 RPL value: 1129 1129 1130 -* **AT+RPL=0:**Device won't immediately reply any downlink commands from platform.1131 -* **AT+RPL=1:**Device will immediately reply message to Unconfirmed Data Down. Payload is 0x00.1132 -* **AT+RPL=2:**Device will immediately reply message to Confirmed Data Down. Payload is 0x00 and requied response header for this command.1133 -* **AT+RPL=3:**Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command.1134 -* **AT+RPL=4:**Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands.847 +* AT+RPL=0: Device won't immediately reply any downlink commands from platform. 848 +* AT+RPL=1: Device will immediately reply message to Unconfirmed Data Down. Payload is 0x00. 849 +* AT+RPL=2: Device will immediately reply message to Confirmed Data Down. Payload is 0x00 and requied response header for this command. 850 +* AT+RPL=3: Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command. 851 +* AT+RPL=4: Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands. 1135 1135 1136 1136 Case Analyes: 1137 1137 ... ... @@ -1139,48 +1139,37 @@ 1139 1139 * For Class C devices used in ChirpStack, need to set AT+RPL=4 because Chirpstack require immedietely reply message to MAC Command. 1140 1140 * For Class C devices used in TTI, need to set AT+RPL=4 because TTI require immediately reply message to Confirmed Data Down & MAC Command. 1141 1141 1142 -{{info}} 1143 -**AT Command: AT+RPL** 1144 -{{/info}} 859 +AT Command: AT+RPL 1145 1145 1146 -(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %) 1147 -|=(% colspan="3" style="width: 533px;" %)AT+RPL 1148 -|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response** 1149 -|(% style="width:160px" %)AT+RPL=?|(% style="width:263px" %)Get packet receiving response level|(% style="width:109px" %)1((( 861 +|=(% colspan="3" %)AT+RPL 862 +|**Command Example**|**Function**|**Response** 863 +|AT+RPL=?|Get packet receiving response level|1((( 1150 1150 OK 1151 1151 ))) 1152 -| (% style="width:160px" %)AT+RPL=0|(% style="width:263px" %)Set packet receiving response level|(% style="width:109px" %)OK866 +|AT+RPL=0|Set packet receiving response level|OK 1153 1153 1154 -{{info}} 1155 -**Downlink Command: 0x21** 1156 -{{/info}} 868 +Downlink Command: 0x21 1157 1157 1158 1158 Format: Command Code (0x21) followed by 1 bytes level value. 1159 1159 1160 1160 If the downlink payload=2101, it means set packet receiving response level to 1, while type code is 21. 1161 1161 1162 -* **Example 1**: Downlink Payload:**2101**~/~/ set packet receiving response level to 11163 -* **Example 2**: Downlink Payload:**2102**~/~/ set packet receiving response level to 2874 +* Example 1: Downlink Payload: 2101 ~/~/ set packet receiving response level to 1 875 +* Example 2: Downlink Payload: 2102 ~/~/ set packet receiving response level to 2 1164 1164 1165 - 1166 - 1167 1167 = 8. AT Commands Combination = 1168 1168 1169 1169 == 8.1 Set a fix RX2DR for downlink window == 1170 1170 1171 -* **AT+ADR=0**~-~-> Disable ADR first1172 -* **AT+RX2DR=xxxx**~-~-> Set xxxx to your wanted DataRate881 +* AT+ADR=0 ~-~-> Disable ADR first 882 +* AT+RX2DR=xxxx ~-~-> Set xxxx to your wanted DataRate 1173 1173 1174 - 1175 - 1176 1176 == 8.2 Use Downlink Command to set a fix uplink DR == 1177 1177 1178 -{{info}} 1179 -**Downlink Command: 0x22000500** 1180 -{{/info}} 886 +Downlink Command: 0x22000500 1181 1181 1182 1182 Same as: 1183 1183 1184 -* AT+ADR=0 ||anchor="H7.1AdaptiveDataRate"]]1185 -* AT+DR=5 ||anchor="H7.4DataRate"]]1186 -* AT+TXP=0 ||anchor="H7.14TransmitPower"]]890 +* AT+ADR=0 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Adaptive_Data_Rate]] 891 +* AT+DR=5 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Data_Rate]] 892 +* AT+TXP=0 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Transmit_Power]]
- image-20220511120050-1.png
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -XWiki.Xiaoling - Size
-
... ... @@ -1,1 +1,0 @@ 1 -136.3 KB - Content
- image-20220526162535-1.png
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -XWiki.Xiaoling - Size
-
... ... @@ -1,1 +1,0 @@ 1 -149.4 KB - Content