Changes for page End Device AT Commands and Downlink Command

Last modified by kai on 2024/09/06 10:00

From version < 19.2 >

edited by Xiaoling
on 2022/05/26 16:25

To version < 50.19 >

edited by Xiaoling
on 2022/07/13 13:58

Change comment: There is no comment for this version

Raw
Rendered

Summary

Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

@@ -1,10 +1,12 @@
--    **Contents：**
++    **Table of** **Contents：**
  {{toc/}}
++
  = 1. Introduction =
++
  Dragino LoRaWAN End Node support two types of AT Commands and Downlink Commands:
  * **Common Commands:** They should be available for each sensor, such as: change uplink interval, reset device.
@@ -17,14 +17,17 @@
  = 2. How to use AT Commands or Downlink command =
++
  * For AT Command , See Devices User Manual for Device. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
  * For LoRaWAN Downlink: The gateway transfer downlink command in HEX format. This page shows the HEX format downlink code for each command. but some servers use base64 as downlink code. Below are reference for how to use downlink command:
--** Use HEX format to send a downlink: [[TTN v3>>url:https://wiki.dragino.com/index.php/Notes_for_TTN#Send_Downlink_message]]
--** Use Base64 format to send a downlink: [[Chirpstack>>url:https://wiki.dragino.com/index.php/Notes_for_ChirpStack#Downlink]].
--** See use note for more serves [[Servers Note>>url:https://wiki.dragino.com/index.php/Main_Page#Use_Note_for_Server]]
++** Use HEX format to send a downlink: [[TTN v3>>Notes for TTN]]
++** Use Base64 format to send a downlink: [[Chirpstack>>Notes for ChirpStack]]
++** See use note for more serves [[Servers Note>>doc:Main.WebHome]](IoT LoRaWAN Server)
++
  = 3. Support End Node and firmware version =
++
  (% border="1" style="background-color:#ffffcc; color:green; width:966px" %)
  |=(% colspan="3" style="width: 963px;" %)(((
  Dragino STM32 base hardware Firmware / LoRaWAN stack list
@@ -98,15 +98,15 @@
  = 4. System Management Commands =
++
  == 4.1 Change Uplink Interval ==
++
  Feature: Change LoRaWAN End Node Transmit Interval.
--(% class="box infomessage" %)
--(((
--**AT Command: AT+TDC**
--)))
++(% style="color:blue" %)**AT Command: AT+TDC**
++
  (% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
  |=(% colspan="3" style="width: 724px;" %)AT+TDC
  |(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
@@ -119,11 +119,11 @@
  Set transmit interval to 60000ms = 60 seconds
  )))
--{{info}}
--**Downlink Command: 0x01**
--{{/info}}
--
  (((
++
++
++(% style="color:blue" %)**Downlink Command: 0x01**
++
  Format: Command Code (0x01) followed by 3 bytes time value.
  )))
@@ -134,14 +134,15 @@
  * **Example 1**: Downlink Payload:** 0100001E** ~/~/ Set Transmit Interval (TDC) = 30 seconds
  * **Example 2**: Downlink Payload:** 0100003C** ~/~/ Set Transmit Interval (TDC) = 60 seconds
++
  == 4.2 Reboot End Node ==
++
  Feature: Reboot End Node to perform a new OTAA or ABP Join.
--{{info}}
--**AT Command: ATZ**
--{{/info}}
++(% style="color:blue" %)**AT Command: ATZ**
++
  (% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
  |=(% colspan="3" %)ATZ: Trig a reset of the MCU
  |**Command Example**|**Function**|**Response**
@@ -159,9 +159,7 @@
  <followed by the Tx and Rx information>
  )))
--{{info}}
--**Downlink Command: 0x04**
--{{/info}}
++(% style="color:blue" %)**Downlink Command: 0x04**
  (((
  Format: Command Code (0x04) followed by FF.
@@ -169,16 +169,18 @@
  (((
  If the downlink payload=**04FF**, the end node will reboot.
++
++
  )))
  == 4.3 Reset to factory Default ==
++
  Feature: Reset the parameters to Factory Default, factory default value depends on the firmware settings, the OTAA and ABP keys will reserve after this command.
--{{info}}
--**AT Command: AT+FDR**
--{{/info}}
++(% style="color:blue" %)**AT Command: AT+FDR**
++
  (% border="1" style="background-color:#ffffcc; color:green; width:831.222px" %)
  |=(% colspan="3" style="width: 828px;" %)Reset to factory default
  |(% style="width:181px" %)**Command Example**|(% style="width:181px" %)**Function**|(% style="width:465px" %)**Response**
@@ -196,9 +196,7 @@
  Please set the parameters or reset Device to apply change
  )))
--{{info}}
--**Downlink Command: 0x04**
--{{/info}}
++(% style="color:blue" %)**Downlink Command: 0x04**
  (((
  Format: Command Code (0x04) followed by FE.
@@ -211,12 +211,12 @@
  == 4.4 Show Firmware Version ==
++
  Feature: Show firmware version. No downlink command yet.
--{{info}}
--**AT Command: AT+VER**
--{{/info}}
++(% style="color:blue" %)**AT Command: AT+VER**
++
  (% border="1" style="background-color:#ffffcc; color:green; width:586px" %)
  |=(% colspan="3" style="width: 583px;" %)AT+VER: Image Version and Frequency Band
  |(% style="width:170px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:113px" %)**Response**
@@ -226,9 +226,7 @@
  OK
  )))
--{{info}}
--**Downlink Command: 0x26 (Valid in 006 stack)**
--{{/info}}
++(% style="color:blue" %)**Downlink Command: 0x26 (Valid in 006 stack)**
  (((
  Downlink Format: 0x26
@@ -239,6 +239,9 @@
  )))
  (((
++
++
++
  **xx: Software Type:**
  )))
@@ -247,6 +247,9 @@
  * 0x00 03: LSE01/LDDS75/LDDS20/LSPH01/LLMS01/LSNPK01
  (((
++
++
++
  **yy: Frequency Band:**
  )))
@@ -262,6 +262,9 @@
  * 0xa0: AS923-3
  (((
++
++
++
  **zz: Subband**
  )))
@@ -270,12 +270,12 @@
  == 4.5 Show System Configure ==
++
  Feature: Show All configure. No downlink command yet.
--{{info}}
--**AT Command: AT+CFG**
--{{/info}}
++(% style="color:blue" %)**AT Command: AT+CFG**
++
  (% border="1" style="background-color:#ffffcc; color:green; width:599.222px" %)
  |=(% colspan="3" style="width: 596px;" %)AT+CFG: Print all configurations
  |(% style="width:160px" %)**Command Example**|(% style="width:154px" %)**Function**|(% style="width:280px" %)**Response**
@@ -293,16 +293,18 @@
  OK
  )))
++
  = 5. Keys, IDs and EUIs management =
++
  == 5.1 Application EUI ==
++
  Feature: Get or Set the Application EUI.
--{{info}}
--**AT Command: AT+APPEUI**
--{{/info}}
++(% style="color:blue" %)**AT Command: AT+APPEUI**
++
  (% border="1" style="background-color:#ffffcc; color:green; width:686.222px" %)
  |=(% colspan="3" style="width: 683px;" %)AT+APPEUI
  |(% style="width:305px" %)**Command Example**|(% style="width:186px" %)**Function**|(% style="width:191px" %)**Response**
@@ -311,14 +311,15 @@
  )))
  |(% style="width:305px" %)AT+APPEUI=00 b3 d5 7e f0 00 4d 34|(% style="width:186px" %)Set the Application EUI|(% style="width:191px" %)OK
++
  == 5.2 Application Key ==
++
  Feature: Get or Set the Application Key.
--{{info}}
--**AT Command: AT+APPKEY**
--{{/info}}
++(% style="color:blue" %)**AT Command: AT+APPKEY**
++
  (% border="1" style="background-color:#ffffcc; color:green; width:976.222px" %)
  |=(% colspan="3" style="width: 973px;" %)AT+APPKEY
  |(% style="width:441px" %)**Command Example**|(% style="width:180px" %)**Function**|(% style="width:350px" %)**Response**
@@ -327,14 +327,15 @@
  )))
  |(% style="width:441px" %)AT+APPKEY=00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35|(% style="width:180px" %)Set the Application Key|(% style="width:350px" %)OK
++
  == 5.3 Application Session Key ==
++
  Feature: Get or Set the Application Session Key.
--{{info}}
--**AT Command: AT+APPSKEY**
--{{/info}}
++(% style="color:blue" %)**AT Command: AT+APPSKEY**
++
  (% border="1" style="background-color:#ffffcc; color:green; width:1040.22px" %)
  |=(% colspan="3" style="width: 1037px;" %)AT+APPSKEY
  |(% style="width:451px" %)**Command Example**|(% style="width:231px" %)**Function**|(% style="width:354px" %)**Response**
@@ -345,14 +345,15 @@
  OK
  )))
++
  == 5.4 Device Address ==
++
  Feature: Get or Set the Device Address.
--{{info}}
--**AT Command: AT+DADDR**
--{{/info}}
++(% style="color:blue" %)**AT Command: AT+DADDR**
++
  (% border="1" style="background-color:#ffffcc; color:green; width:795.222px" %)
  |=(% colspan="3" style="width: 792px;" %)AT+DADDR
  |(% style="width:192px" %)**Command Example**|(% style="width:241px" %)**Function**|(% style="width:359px" %)**Response**
@@ -363,14 +363,15 @@
  )))
  |(% style="width:192px" %)AT+DADDR=A8 40 41 FF|(% style="width:241px" %)Set the Application Session Key.|(% style="width:359px" %)OK
++
  == 5.5 Device EUI ==
++
  Feature: Get or Set the Device EUI.
--{{info}}
--**AT Command: AT+DEUI**
--{{/info}}
++(% style="color:blue" %)**AT Command: AT+DEUI**
++
  (% border="1" style="background-color:#ffffcc; color:green; width:1035.22px" %)
  |=(% colspan="3" style="width: 1032px;" %)AT+DEUI
  |(% style="width:250px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:634px" %)**Response**
@@ -381,14 +381,15 @@
  OK
  )))
++
  == 5.6 Network ID ==
++
  Feature: Get or Set the Network ID.(You can enter this command change only after successful network connection)
--{{info}}
--**AT Command: AT+NWKID**
--{{/info}}
++(% style="color:blue" %)**AT Command: AT+NWKID**
++
  (% border="1" style="background-color:#ffffcc; color:green; width:448.222px" %)
  |=(% colspan="3" style="width: 445px;" %)AT+NWKID
  |(% style="width:191px" %)**Command Example**|(% style="width:153px" %)**Function**|(% style="width:101px" %)**Response**
@@ -397,14 +397,15 @@
  )))
  |(% style="width:191px" %)AT+NWKID=A8 40 41 FF|(% style="width:153px" %)Set the Network ID.|(% style="width:101px" %)OK
++
  == 5.7 Network Session Key ==
++
  Feature: Get or Set the Network Session Key
--{{info}}
--**AT Command: AT+NWKSKEY**
--{{/info}}
++(% style="color:blue" %)**AT Command: AT+NWKSKEY**
++
  (% border="1" style="background-color:#ffffcc; color:green; width:1017.22px" %)
  |=(% colspan="3" style="width: 1014px;" %)AT+NWKSKEY
  |(% style="width:455px" %)**Command Example**|(% style="width:215px" %)**Function**|(% style="width:343px" %)**Response**
@@ -413,16 +413,21 @@
  )))
  |(% style="width:455px" %)AT+NWKSKEY=A8 40 41 FF FF 12 34 56 00 01 02 04 05 06 06 07|(% style="width:215px" %)Set the Network Session Key.|(% style="width:343px" %)OK
++
  = 6. Joining and sending date on LoRaWAN network =
++
  == 6.1 Confirm Mode ==
++
++=== 6.1.1  AT+CFM command before DR-LWS007 software stack ===
++
++
  Feature: Get or Set the confirmation mode (0-1).
--{{info}}
--**AT Command: AT+CFM**
--{{/info}}
++(% style="color:blue" %)**AT Command: AT+CFM**
++
  (% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
  |=(% colspan="3" style="width: 707px;" %)AT+CFM
  |(% style="width:155px" %)**Command Example**|(% style="width:205px" %)**Function**|(% style="width:346px" %)**Response**
@@ -432,7 +432,7 @@
  |(% style="width:155px" %)AT+CFM=1|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)OK
  |(% style="width:155px" %)AT+CFM=2|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)While Error in format, return AT_PARAM_ERROR
--Downlink Command: 0x05
++(% style="color:blue" %)**Downlink Command: 0x05**
  Format: Command Code (0x05) followed by 2 bytes mode value.
@@ -441,14 +441,63 @@
  * Example 1: Downlink Payload: 0501 ~/~/ Set AT+CFM=1
  * Example 2: Downlink Payload: 0500 ~/~/ Set AT+CFM=0
++
++
++=== 6.1.2  AT+CFM command since DR-LWS007 software stack ===
++
++
++(% style="color:blue" %)**AT Command: AT+CFM**
++
++(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
++|=(% colspan="3" style="width: 707px;" %)AT+CFM
++|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
++|(% style="width:160px" %)(((
++AT+CFM=1,0,0
++
++value1
++)))|(% style="width:198px" %)confirmed uplink|(% style="width:349px" %)(((
++1
++
++OK
++)))
++|(% style="width:160px" %)(((
++AT+CFM=0,?,0
++
++value2
++)))|(% style="width:198px" %)set max retry , range: 0 ~~ 7|(% style="width:349px" %)(((
++0~~7
++
++OK
++)))
++|(% style="width:160px" %)(((
++AT+CFM=0,0,1
++
++value3
++)))|(% style="width:198px" %)uplink fcnt increase by 1 for each retry|(% style="width:349px" %)(((
++1
++
++OK
++)))
++
++(% style="color:blue" %)**Downlink Command: 0x05**
++
++Format: Command Code (0x05) followed by 2 bytes mode value.
++
++If the downlink payload=05010101, it means set end node to use confirm mode, while type code is 05.
++
++* Example 1: Downlink Payload: 05010101 ~/~/ Set AT+CFM=1,1,1
++* Example 2: Downlink Payload: 05000700 ~/~/ Set AT+CFM=0,7,0
++
++
++
  == 6.2 Confirm Status ==
++
  Feature: Get confirmation status of the last AT+SEND (0-1).
--{{info}}
--**AT Command: AT+CFS**
--{{/info}}
++(% style="color:blue" %)**AT Command: AT+CFS**
++
  (% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
  |=(% colspan="3" style="width: 531px;" %)AT+CFS
  |(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:178px" %)**Response**
@@ -456,14 +456,15 @@
  OK
  )))
++
  == 6.3 Join LoRa® Network ==
++
  Feature: Join network.
--{{info}}
--**AT Command: AT+JOIN**
--{{/info}}
++(% style="color:blue" %)**AT Command: AT+JOIN**
++
  (% border="1" style="background-color:#ffffcc; color:green; width:647.222px" %)
  |=(% colspan="3" style="width: 644px;" %)AT+JOIN
  |(% style="width:163px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:334px" %)**Response**
@@ -473,14 +473,15 @@
  While Error in format, return AT_BUSY_ERROR
  )))
++
  == 6.4 LoRa® Network Join Mode ==
++
  Feature: Get or Set the Network Join Mode. (0: ABP, 1: OTAA).
--{{info}}
--**AT Command: AT+NJM**
--{{/info}}
++(% style="color:blue" %)**AT Command: AT+NJM**
++
  (% border="1" style="background-color:#ffffcc; color:green; width:753.222px" %)
  |=(% colspan="3" style="width: 750px;" %)AT+NJM
  |(% style="width:162px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:361px" %)**Response**
@@ -490,25 +490,25 @@
  |(% style="width:162px" %)AT+NJM=0|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)OK
  |(% style="width:162px" %)AT+NJM=2|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)While Error in format, return AT_PARAM_ERROR
--{{info}}
--**Downlink Command: 0x20**
--{{/info}}
++(% style="color:blue" %)**Downlink Command: 0x20**
  Format: Command Code (0x20) followed by 1 bytes mode value.
  If the downlink payload=2000, it means set the Network Join Mode, while type code is 20.
--* **Example 1: **Downlink Payload: **2000** ~/~/ Set AT+NJM=O
++* **Example 1: **Downlink Payload: **2000** ~/~/ Set AT+NJM=0
  * **Example 2:** Downlink Payload: **2001** ~/~/ Set AT+NJM=1
++
++
  == 6.5 LoRa® Network Join Status ==
++
  Feature: LoRa® Network Join Status.
--{{info}}
--**AT Command: AT+NJS**
--{{/info}}
++(% style="color:blue" %)**AT Command: AT+NJS**
++
  (% border="1" style="background-color:#ffffcc; color:green; width:498.222px" %)
  |=(% colspan="3" style="width: 495px;" %)AT+NJS
  |(% style="width:169px" %)**Command Example**|(% style="width:164px" %)**Function**|(% style="width:161px" %)**Response**
@@ -516,14 +516,15 @@
  OK
  )))
++
  == 6.6 Print Last Received Data in Raw Format ==
++
  Feature: Print Last Received Data in Raw Format<port:data>.
--{{info}}
--**AT Command: AT+RECV**
--{{/info}}
++(% style="color:blue" %)**AT Command: AT+RECV**
++
  (% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
  |=(% colspan="3" style="width: 584px;" %)AT+RECV
  |(% style="width:161px" %)**Command Example**|(% style="width:272px" %)**Function**|(% style="width:150px" %)**Response**
@@ -531,14 +531,15 @@
  OK
  )))
++
  == 6.7 Print Last Received Data in Binary Format ==
++
  Feature: Print Last Received Data in Binary Format<port:data>.
--{{info}}
--**AT Command: AT+RECVB**
--{{/info}}
++(% style="color:blue" %)**AT Command: AT+RECVB**
++
  (% border="1" style="background-color:#ffffcc; color:green; width:793.222px" %)
  |=(% colspan="3" style="width: 790px;" %)AT+RECVB
  |(% style="width:173px" %)**Command Example**|(% style="width:497px" %)**Function**|(% style="width:120px" %)**Response**
@@ -546,14 +546,15 @@
  OK
  )))
++
  == 6.8 Send Text Data ==
++
  Feature: Send Text Data<port:data>.
--{{info}}
--**AT Command: AT+SEND**
--{{/info}}
++(% style="color:blue" %)**AT Command: AT+SEND**
++
  (% border="1" style="background-color:#ffffcc; color:green; width:991.222px" %)
  |=(% colspan="3" style="width: 988px;" %)AT+SEND
  |(% style="width:201px" %)**Command Example**|(% style="width:340px" %)**Function**|(% style="width:446px" %)**Response**
@@ -565,14 +565,15 @@
  )))
++
  == 6.9 Send Hexadecimal Data ==
++
  Feature: Send hexadecimal data along with the application port.
--{{info}}
--**AT Command: AT+SENDB**
--{{/info}}
++(% style="color:blue" %)**AT Command: AT+SENDB**
++
  (% border="1" style="background-color:#ffffcc; color:green; width:1120.22px" %)
  |=(% colspan="3" style="width: 1117px;" %)AT+SENDB
  |(% style="width:257px" %)**Command Example**|(% style="width:406px" %)**Function**|(% style="width:453px" %)**Response**
@@ -583,16 +583,18 @@
  )))
++
  = 7. LoRaWAN network management =
++
  == 7.1 Adaptive Data Rate ==
++
  Feature: Get or Set the Adaptive Data Rate setting. (0: off, 1: on).
--{{info}}
--**AT Command: AT+ADR**
--{{/info}}
++(% style="color:blue" %)**AT Command: AT+ADR**
++
  (% border="1" style="background-color:#ffffcc; color:green; width:683.222px" %)
  |=(% colspan="3" style="width: 680px;" %)AT+ADR
  |(% style="width:162px" %)**Command Example**|(% style="width:266px" %)**Function**|(% style="width:250px" %)**Response**
@@ -604,24 +604,23 @@
  AT_PARAM_ERROR
  )))
--{{info}}
--**Downlink Command: 0x22**
--{{/info}}
++(% style="color:blue" %)**Downlink Command: 0x22**
--
  If the downlink payload=2201, it means setting the adaptive data rate to 1, while type code is 22.
--* **Example 1**: Downlink Payload: **2201** ~/~/ Set AT+ADR=1.
++* **Example 1**: Downlink Payload: **2201**         ~/~/ Set AT+ADR=1.
  * **Example 2**: Downlink Payload: **2200FFFF** ~/~/ Set AT+ADR=0.
++
++
  == 7.2 LoRa® Class ==
++
  Feature: Get or Set the Device Class(Currently only support class A, class C).
--{{info}}
--**AT Command:AT+CLASS**
--{{/info}}
++(% style="color:blue" %)**AT Command:AT+CLASS**
++
  (% border="1" style="background-color:#ffffcc; color:green; width:507.222px" %)
  |=(% colspan="3" style="width: 504px;" %)AT+CLASS
  |(% style="width:163px" %)**Command Example**|(% style="width:166px" %)**Function**|(% style="width:175px" %)**Response**
@@ -632,14 +632,15 @@
  )))
++
  == 7.3 Duty Cycle Setting ==
++
  Feature: Get or Set the ETSI Duty Cycle setting - 0=disable, 1=enable - Only for testing.
--{{info}}
--**AT Command:AT+DCS**
--{{/info}}
++(% style="color:blue" %)**AT Command:AT+DCS**
++
  (% border="1" style="background-color:#ffffcc; color:green; width:515.222px" %)
  |=(% colspan="3" style="width: 512px;" %)AT+DCS
  |(% style="width:165px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:107px" %)**Response**
@@ -650,14 +650,15 @@
  )))
++
  == 7.4 Data Rate ==
++
  Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) . Note: while set Data Rate, please use set Adptive Data Rate, ADR=0 first. otherwise device will response to server's ADR command and change the DR to the setting from server
--{{info}}
--**AT Command: AT+DR**
--{{/info}}
++(% style="color:blue" %)**AT Command: AT+DR**
++
  (% border="1" style="background-color:#ffffcc; color:green; width:466.222px" %)
  |=(% colspan="3" style="width: 463px;" %)AT+DR
  |(% style="width:156px" %)**Command Example**|(% style="width:167px" %)**Function**|(% style="width:140px" %)**Response**
@@ -668,24 +668,23 @@
  )))
--{{info}}
--**Downlink Command: 0x2200aaFF**
--{{/info}}
++(% style="color:blue" %)**Downlink Command: 0x2200aaFF**
--
  If the downlink payload=220001FF, it means setting the data rate to 1, while type code is 22 00 aa FF.
  * **Example 1**: Downlink Payload: **220001FF** ~/~/ Set AT+DR=1.
  * **Example 2**: Downlink Payload: **220000FF** ~/~/ Set AT+DR=0.
++
++
  == 7.5 Frame Counter Downlink ==
++
  Feature: Get or Set the Frame Counter Downlink.
--{{info}}
--**AT Command:AT+FCD**
--{{/info}}
++(% style="color:blue" %)**AT Command:AT+FCD**
++
  (% border="1" style="background-color:#ffffcc; color:green; width:693.222px" %)
  |=(% colspan="3" style="width: 690px;" %)AT+FCD
  |(% style="width:162px" %)**Command Example**|(% style="width:258px" %)**Function**|(% style="width:269px" %)**Response**
@@ -694,18 +694,16 @@
  )))
  |(% style="width:162px" %)AT+FCD=10|(% style="width:258px" %)Set the Frame Counter Downlink.|(% style="width:269px" %)(System will write new value to FCD)(((
  OK
--
--
  )))
++
  == 7.6 Frame Counter Uplink ==
  Feature: Get or Set the Frame Counter Uplink.
--{{info}}
--**AT Command:AT+FCU**
--{{/info}}
++(% style="color:blue" %)**AT Command:AT+FCU**
++
  (% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
  |=(% colspan="3" style="width: 531px;" %)AT+FCU
  |(% style="width:177px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:113px" %)**Response**
@@ -716,14 +716,15 @@
  )))
++
  == 7.7 Join Accept Delay1 ==
++
  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 1 in ms.
--{{info}}
--**AT Command:AT+JN1DL**
--{{/info}}
++(% style="color:blue" %)**AT Command:AT+JN1DL**
++
  (% border="1" style="background-color:#ffffcc; color:green; width:537.222px" %)
  |=(% colspan="3" style="width: 534px;" %)AT+JN1DL
  |(% style="width:164px" %)**Command Example**|(% style="width:229px" %)**Function**|(% style="width:140px" %)**Response**
@@ -734,14 +734,14 @@
  )))
++
  == 7.8 Join Accept Delay2 ==
  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 2 in ms.
--{{info}}
--**AT Command:AT+JN2DL**
--{{/info}}
++(% style="color:blue" %)**AT Command:AT+JN2DL**
++
  (% border="1" style="background-color:#ffffcc; color:green; width:538.222px" %)
  |=(% colspan="3" style="width: 535px;" %)AT+JN2DL
  |(% style="width:160px" %)**Command Example**|(% style="width:228px" %)**Function**|(% style="width:146px" %)**Response**
@@ -752,14 +752,17 @@
  )))
++
  == 7.9 Public Network Mode ==
--Feature: Get or Set the public network mode. (0: off, 1: on)
--{{info}}
--**AT Command:AT+PNM**
--{{/info}}
++Feature: Get or Set the public network mode. (0: off, 1: on). A Public LoRaWAN network use 0x34 as syncword. Default Settings; PNM=1
++(% style="color:red" %)Notice: If user build their own LoRaWAN server but still use syncword=0x34, this is still considered a public LoRaWAN network
++
++
++(% style="color:blue" %)**AT Command:AT+PNM**
++
  (% border="1" style="background-color:#ffffcc; color:green; width:667.222px" %)
  |=(% colspan="3" style="width: 664px;" %)AT+PNM
  |(% style="width:166px" %)**Command Example**|(% style="width:225px" %)**Function**|(% style="width:272px" %)**Response**
@@ -766,20 +766,26 @@
  |(% style="width:166px" %)AT+PNM=?|(% style="width:225px" %)Get the public network mode.|(% style="width:272px" %)1(((
  OK
  )))
--|(% style="width:166px" %)AT+PNM=1|(% style="width:225px" %)Set the public network mode.|(% style="width:272px" %)(System will write new value to PNM)(((
++|(% style="width:166px" %)AT+PNM=1|(% style="width:225px" %)(((
++Set the public network mode.
++
++Set syncword=0x34
++)))|(% style="width:272px" %)(System will write new value to PNM)(((
  OK
  )))
++|(% style="width:166px" %)AT+PNM=0|(% style="width:225px" %)Set to use private network autoset syncword=0x12|(% style="width:272px" %)
++
  == 7.10 Receive Delay1 ==
++
  Feature: Get or Set the delay between the end of the Tx and the Rx Window 1 in ms
--{{info}}
--**AT Command:AT+RX1DL**
--{{/info}}
++(% style="color:blue" %)**AT Command:AT+RX1DL**
++
  (% border="1" style="background-color:#ffffcc; color:green; width:408.222px" %)
  |=(% colspan="3" style="width: 405px;" %)AT+RX1DL
  |(% style="width:155px" %)**Command Example**|(% style="width:128px" %)**Function**|(% style="width:122px" %)**Response**
@@ -790,14 +790,16 @@
  )))
--== 7.11Receive Delay2 ==
++
++== 7.11 Receive Delay2 ==
++
++
  Feature: Get or Set the delay between the end of the Tx and the Rx Window 2 in ms
--{{info}}
--**AT Command:AT+RX2DL**
--{{/info}}
++(% style="color:blue" %)**AT Command:AT+RX2DL**
++
  (% border="1" style="background-color:#ffffcc; color:green; width:481.222px" %)
  |=(% colspan="3" style="width: 478px;" %)AT+RX2DL
  |(% style="width:175px" %)**Command Example**|(% style="width:152px" %)**Function**|(% style="width:150px" %)**Response**
@@ -808,14 +808,16 @@
  )))
++
++
  == 7.12 Rx2 Window Data Rate ==
++
  Feature: Get or Set the Rx2 window data rate (0-7 corresponding to DR_X)
--{{info}}
--**AT Command:AT+RX2DR**
--{{/info}}
++(% style="color:blue" %)**AT Command:AT+RX2DR**
++
  (% border="1" style="background-color:#ffffcc; color:green; width:525.222px" %)
  |=(% colspan="3" style="width: 522px;" %)AT+RX2DR
  |(% style="width:160px" %)**Command Example**|(% style="width:232px" %)**Function**|(% style="width:130px" %)**Response**
@@ -826,14 +826,16 @@
  )))
++
++
  == 7.13 Rx2 Window Frequency ==
++
  Feature: Get or Set the Rx2 window frequency
--{{info}}
--**AT Command:AT+RX2FQ**
--{{/info}}
++(% style="color:blue" %)**AT Command:AT+RX2FQ**
++
  (% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
  |=(% colspan="3" style="width: 584px;" %)AT+RX2FQ
  |(% style="width:183px" %)**Command Example**|(% style="width:240px" %)**Function**|(% style="width:160px" %)**Response**
@@ -844,14 +844,16 @@
  )))
++
++
  == 7.14 Transmit Power ==
++
  Feature: Get or Set the Transmit Power(0-5, MAX:0, MIN:5, according to LoRaWAN Spec, or 40=10dB, 41 = 11dB, …, 50 = 20dB which is out of LoRaWAN spec. )
--{{info}}
--**AT Command:AT+TXP**
--{{/info}}
++(% style="color:blue" %)**AT Command:AT+TXP**
++
  (% border="1" style="background-color:#ffffcc; color:green; width:465.222px" %)
  |=(% colspan="3" style="width: 462px;" %)AT+TXP
  |(% style="width:161px" %)**Command Example**|(% style="width:189px" %)**Function**|(% style="width:112px" %)**Response**
@@ -869,14 +869,17 @@
  * **Example 1**: Downlink Payload: **22000102** ~/~/ Set AT+TXP=2.
  * **Example 2**: Downlink Payload: **220000FF** ~/~/ Set AT+TXP=0.
++
++
++
  == 7.15 RSSI of the Last Received Packet ==
++
  Feature: Get or Set the Rx2 window frequency
--{{info}}
--**AT Command:AT+RSSI**
--{{/info}}
++(% style="color:blue" %)**AT Command:AT+RSSI**
++
  (% border="1" style="background-color:#ffffcc; color:green; width:557.222px" %)
  |=(% colspan="3" style="width: 554px;" %)AT+RSSI
  |(% style="width:164px" %)**Command Example**|(% style="width:289px" %)**Function**|(% style="width:100px" %)**Response**
@@ -884,14 +884,16 @@
  OK
  )))
++
++
  == 7.16 SNR of the Last Received Packet ==
++
  Feature: Get the SNR of the last received packet
--{{info}}
--**AT Command:AT+SNR**
--{{/info}}
++(% style="color:blue" %)**AT Command:AT+SNR**
++
  (% border="1" style="background-color:#ffffcc; color:green; width:571.222px" %)
  |=(% colspan="3" style="width: 568px;" %)AT+SNR
  |(% style="width:164px" %)**Command Example**|(% style="width:290px" %)**Function**|(% style="width:113px" %)**Response**
@@ -899,14 +899,16 @@
  OK
  )))
++
++
  == 7.17 Application Port ==
++
  Feature: Get or set the application port.
--{{info}}
--**AT Command: AT+PORT**
--{{/info}}
++(% style="color:blue" %)**AT Command: AT+PORT**
++
  (% border="1" style="background-color:#ffffcc; color:green; width:500.222px" %)
  |=(% colspan="3" style="width: 497px;" %)AT+PORT
  |(% style="width:157px" %)**Command Example**|(% style="width:204px" %)**Function**|(% style="width:135px" %)**Response**
@@ -915,10 +915,9 @@
  )))
  |(% style="width:157px" %)AT+PORT=21|(% style="width:204px" %)Set the application port|(% style="width:135px" %)OK
--{{info}}
--**Downlink Command: 0x23**
--{{/info}}
++(% style="color:blue" %)**Downlink Command: 0x23**
++
  Format: Command Code (0x23) followed by 1 bytes port value.
  If the downlink payload=2301, it means set the application port to 1, while type code is 23.
@@ -926,14 +926,17 @@
  * **Example 1**: Downlink Payload: **2301** ~/~/ set the application port to 1
  * **Example 2**: Downlink Payload:** 2305** ~/~/ set the application port to 5
++
++
++
  == 7.18 Single Channel Mode ==
++
  Feature:Get or Set Frequency (Unit: Hz) for Single Channel Mode.
--{{info}}
--**AT Command: AT+CHS**
--{{/info}}
++(% style="color:blue" %)**AT Command: AT+CHS**
++
  (% border="1" style="background-color:#ffffcc; color:green; width:603.222px" %)
  |=(% colspan="3" style="width: 600px;" %)AT+CHS
  |(% style="width:182px" %)**Command Example**|(% style="width:295px" %)**Function**|(% style="width:122px" %)**Response**
@@ -942,14 +942,15 @@
  )))
  |(% style="width:182px" %)AT+CHS=868100000|(% style="width:295px" %)Set Frequency for Single Channel Mode|(% style="width:122px" %)OK
++
++
  == 7.19 Eight Channel Mode ==
  Feature: Get or Set eight channels mode,Only for US915,AU915,CN470.
--{{info}}
--**AT Command: AT+CHE**
--{{/info}}
++(% style="color:blue" %)**AT Command: AT+CHE**
++
  (% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
  |=(% colspan="3" style="width: 707px;" %)AT+CHE
  |(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
@@ -960,10 +960,9 @@
  )))
  |(% style="width:160px" %)AT+CHE=1|(% style="width:198px" %)Set eight channels mode|(% style="width:349px" %)OK
--{{info}}
--**Downlink Command: 0x24**
--{{/info}}
++(% style="color:blue" %)**Downlink Command: 0x24**
++
  Format: Command Code (0x24) followed by 1 bytes channel value.
  If the downlink payload=2401, it means set channel mode to 1, while type code is 24.
@@ -971,14 +971,17 @@
  * **Example 1**: Downlink Payload: 2401 ~/~/ set channel mode to 1
  * **Example 2**: Downlink Payload: 2405 ~/~/ set channel mode to 5
++
++
++
  == 7.20 Get or Set RXwindows1 timeout ==
--Feature:Get or Set the number of symbols to detect and timeout from RXwindow1(0 to 255).
--{{info}}
--**AT Command: AT+RX1WTO**
--{{/info}}
++Feature: Get or Set the number of symbols to detect and timeout from RXwindow1(0 to 255).
++
++(% style="color:blue" %)**AT Command: AT+RX1WTO**
++
  (% border="1" style="background-color:#ffffcc; color:green; width:460.222px" %)
  |=(% colspan="3" style="width: 457px;" %)AT+ RX1WTO
  |(% style="width:163px" %)**Command Example**|(% style="width:201px" %)**Function**|(% style="width:93px" %)**Response**
@@ -988,23 +988,30 @@
  |(% style="width:163px" %)AT+RX1WTO=60|(% style="width:201px" %)Set RXwindows1 timeout|(% style="width:93px" %)OK
  (((
++
++
  **AT+RX1TWO** is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
++
++
  )))
  [[image:image-20220526162535-1.png]]
++
  (((
  Increasing thisvalue is equal to extending the time that the receiving window is opened, butthe corresponding power consumption will also increase. Properly increasingthis value can increase the success rate of the downlink.
++
++
  )))
  == 7.21 Get or Set RXwindows2 timeout ==
--Feature:Get or Set the number of symbols to detect and timeout from RXwindow2(0 to 255).
--{{info}}
--**AT Command: AT+RX2WTO**
--{{/info}}
++Feature: Get or Set the number of symbols to detect and timeout from RXwindow2(0 to 255).
++
++(% style="color:blue" %)**AT Command: AT+RX2WTO**
++
  (% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
  |=(% colspan="3" style="width: 494px;" %)AT+ RX2WTO
  |(% style="width:190px" %)**Command Example**|(% style="width:199px" %)**Function**|(% style="width:104px" %)**Response**
@@ -1013,14 +1013,16 @@
  )))
  |(% style="width:190px" %)AT+RX2WTO=20|(% style="width:199px" %)Set RXwindows2 timeout|(% style="width:104px" %)OK
++
++
  == 7.22 Setting up uplinkdwelltime (as923, au915) ==
++
  Feature: Get or Set uplinkdwelltime
--{{info}}
--**AT Command: AT+DWELLT**
--{{/info}}
++(% style="color:blue" %)**AT Command: AT+DWELLT**
++
  (% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
  |=(% colspan="3" style="width: 494px;" %)AT+DWELLT
  |(% style="width:183px" %)**Command Example**|(% style="width:179px" %)**Function**|(% style="width:131px" %)**Response**
@@ -1029,10 +1029,9 @@
  )))
  |(% style="width:183px" %)AT+DWELLT=0|(% style="width:179px" %)Set uplinkdwelltime|(% style="width:131px" %)OK
--{{info}}
--**Downlink Command: 0x25**
--{{/info}}
++(% style="color:blue" %)**Downlink Command: 0x25**
++
  Format: Command Code (0x25) followed by 1 bytes state value.
  If the downlink payload=2501, it means set uplinkdwelltime to 1, while type code is 25.
@@ -1040,10 +1040,15 @@
  * **Example 1**: Downlink Payload: **2501** ~/~/ set uplinkdwelltime to 1
  * **Example 2**: Downlink Payload: **2500** ~/~/ set uplinkdwelltime to 0
++
++
++
  == 7.23 Set Packet Receiving Response Level ==
++
  Feature: Get or Set packet receiving response level. This feature is used to set compatible with different LoRaWAN servers. If RPL doesn;t match , user will see strange message in the server portal.
++
  RPL value:
  * **AT+RPL=0:** Device won't immediately reply any downlink commands from platform.
@@ -1052,6 +1052,8 @@
  * **AT+RPL=3:** Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command.
  * **AT+RPL=4: **Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands.
++
++
  Case Analyes:
  * For Class A devices, AT+RPL=0 is ok. that is defaut settings in software.
@@ -1058,10 +1058,10 @@
  * For Class C devices used in ChirpStack, need to set AT+RPL=4 because Chirpstack require immedietely reply message to MAC Command.
  * For Class C devices used in TTI, need to set AT+RPL=4 because TTI require immediately reply message to Confirmed Data Down & MAC Command.
--{{info}}
--**AT Command: AT+RPL**
--{{/info}}
++
++(% style="color:blue" %)**AT Command: AT+RPL**
++
  (% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
  |=(% colspan="3" style="width: 533px;" %)AT+RPL
  |(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
@@ -1070,10 +1070,9 @@
  )))
  |(% style="width:160px" %)AT+RPL=0|(% style="width:263px" %)Set packet receiving response level|(% style="width:109px" %)OK
--{{info}}
--**Downlink Command: 0x21**
--{{/info}}
++(% style="color:blue" %)**Downlink Command: 0x21**
++
  Format: Command Code (0x21) followed by 1 bytes level value.
  If the downlink payload=2101, it means set packet receiving response level to 1, while type code is 21.
@@ -1081,6 +1081,136 @@
  * **Example 1**: Downlink Payload: **2101** ~/~/ set packet receiving response level to 1
  * **Example 2**: Downlink Payload: **2102** ~/~/ set packet receiving response level to 2
++
++
++
++== 7.24 Controls NBTrans in unconfirmed uplink mode（LWS007 NBTrans:Set retransmission packets) ==
++
++
++(% style="color:blue" %)**AT Command: AT+SETMAXNBTRANS **
++
++(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
++|=(% colspan="3" style="width: 533px;" %)AT+**SETMAXNBTRANS**
++|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
++|(% style="width:160px" %)**AT+SETMAXNBTRANS=1，0**|(% style="width:263px" %)Value1: set the maximum NBTrans.|(% style="width:109px" %)1(((
++OK
++)))
++|(% style="width:160px" %)**AT+SETMAXNBTRANS=？，1**|(% style="width:263px" %)value2:  0: uplink fcnt doesn't change for each NBTrans; 1: uplink fcnt increase by 1 for each NBTrans.|(% style="width:109px" %)(((
++1
++
++OK
++)))
++
++
++(% style="color:blue" %)**Downlink Command: 0x33**
++
++Format: Command Code (0x33) followed by 2 bytes mode value.
++
++If the downlink payload=330100, it means set end node to use confirm mode, while type code is 33.
++
++* Example 1: Downlink Payload: 330100 ~/~/ Set AT+SETMAXNBTRANS=1,0
++* Example 2: Downlink Payload: 330201 ~/~/ Set AT+SETMAXNBTRANS=2,1
++
++
++
++
++== 7.25 Device offline rejoining （LWS007) ==
++
++
++(% style="color:blue" %)**AT Command: AT+DDETECT**
++
++(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
++|=(% colspan="3" style="width: 707px;" %)AT+**DDETECT**
++|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
++|(% style="width:160px" %)(((
++AT+DDETECT=1,1440,2880
++
++value1
++)))|(% style="width:198px" %)Enable online detect|(% style="width:349px" %)(((
++1
++
++OK
++)))
++|(% style="width:160px" %)(((
++AT+DDETECT=1,?,2880
++
++value2
++)))|(% style="width:198px" %)Online detection packet sending time|(% style="width:349px" %)(((
++
++
++OK
++)))
++|(% style="width:160px" %)(((
++AT+DDETECT=1,1440,？
++
++value3
++)))|(% style="width:198px" %)Process rejoin|(% style="width:349px" %)(((
++
++
++OK
++)))
++
++
++(% style="color:blue" %)**Downlink Command: 0x33**
++
++Format: Command Code (0x32) followed by 2 bytes mode value.
++
++If the downlink payload=320105A00B40, it means set end node to use confirm mode, while type code is 33.
++
++* Example 1: Downlink Payload: 320105A00B40 ~/~/ Set AT+DDETECT=1,1440,2880
++
++
++
++
++== 7.26 Request the server to send an ACK ==
++
++
++(% style="color:blue" %)**AT Command: AT+PNACKMD**
++
++(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
++|=(% colspan="3" style="width: 533px;" %)**AT+PNACKMD**
++|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
++|(% style="width:160px" %)**AT+PNACKMD=1**|(% style="width:263px" %)If the node uploads the ACK as confirm, it will request the server to send an ACK. If the server ack is not received, the node will upload the packets that have not received the ACK the next time it receives the ACK|(% style="width:109px" %)1(((
++OK
++)))
++|(% style="width:160px" %)**AT+PNACKMD=0**|(% style="width:263px" %)off request the server to send an ACK|(% style="width:109px" %)(((
++0
++
++OK
++)))
++
++
++
++== 7.27 Adjust network rejoining interval ==
++
++
++(% style="color:blue" %)**AT Command: AT+RJTDC**
++
++(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
++|=(% colspan="3" style="width: 724px;" %)AT+RJTDC
++|(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
++|(% style="width:165px" %)AT+RJTDC=?|(% style="width:227px" %)Show the ReJoin data transmission interval in min|(% style="width:329px" %)30000(((
++OK
++
++the interval is 30000ms = 30s
++)))
++|(% style="width:165px" %)AT+RJTDC=60000|(% style="width:227px" %)Set the ReJoin data transmission interval in min|(% style="width:329px" %)OK(((
++Set the ReJoin data transmission interval to 60000ms = 60 seconds
++)))
++
++
++(% style="color:blue" %)**Downlink Command: 0x26**
++
++Format: Command Code (0x26) followed by 2 bytes mode value.
++
++If the downlink payload=26000A, it means set end node to use confirm mode, while type code is 26.
++
++* Example 1: Downlink Payload: 26000A ~/~/ Set AT+RJTDC=10
++* Example 2: Downlink Payload: 260002 ~/~/ Set AT+RJTDC=2
++
++
++
++
  = 8. AT Commands Combination =
  == 8.1 Set a fix RX2DR for downlink window ==
@@ -1090,12 +1090,12 @@
  == 8.2 Use Downlink Command to set a fix uplink DR ==
--{{info}}
--**Downlink Command: 0x22000500**
--{{/info}}
++(% style="color:blue" %)**Downlink Command: 0x22000500**
++
++
  Same as:
--* AT+ADR=0 [[Reference>>http://8.211.40.43:8080/xwiki/bin/view/End%20Device%20AT%20Commands%20and%20Downlink%20Command/#H7.1AdaptiveDataRate]]
--* AT+DR=5 [[Reference>>http://8.211.40.43:8080/xwiki/bin/view/End%20Device%20AT%20Commands%20and%20Downlink%20Command/#H7.4DataRate]]
--* AT+TXP=0 [[Reference>>http://8.211.40.43:8080/xwiki/bin/view/End%20Device%20AT%20Commands%20and%20Downlink%20Command/#H7.14TransmitPower]]
++* AT+ADR=0  [[Reference>>||anchor="H7.1AdaptiveDataRate"]]
++* AT+DR=5    [[Reference>>||anchor="H7.4DataRate"]]
++* AT+TXP=0  [[Reference>>||anchor="H7.14TransmitPower"]]

Changes for page End Device AT Commands and Downlink Command

Summary

Details

Applications

Navigation