Last modified by kai on 2024/09/06 10:00
<
From version < 15.6 >
edited by Xiaoling
on 2022/05/12 11:05
To version < 50.7 >
edited by Xiaoling
on 2022/07/13 13:32
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,10 +1,12 @@
1 -Contens
1 + **Table of** **Contents：**
2 2  
3 3  {{toc/}}
4 4  
5 5  
6 +
6 6  = 1. Introduction =
7 7  
9 +
8 8  Dragino LoRaWAN End Node support two types of AT Commands and Downlink Commands:
9 9  
10 10  * **Common Commands:** They should be available for each sensor, such as: change uplink interval, reset device.
... ... @@ -17,30 +17,34 @@
17 17  
18 18  = 2. How to use AT Commands or Downlink command =
19 19  
22 +
20 20  * For AT Command , See Devices User Manual for Device. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
21 21  * For LoRaWAN Downlink: The gateway transfer downlink command in HEX format. This page shows the HEX format downlink code for each command. but some servers use base64 as downlink code. Below are reference for how to use downlink command:
22 -** Use HEX format to send a downlink: [[TTN v3>>url:https://wiki.dragino.com/index.php/Notes_for_TTN#Send_Downlink_message]]
23 -** Use Base64 format to send a downlink: [[Chirpstack>>url:https://wiki.dragino.com/index.php/Notes_for_ChirpStack#Downlink]].
24 -** See use note for more serves [[Servers Note>>url:https://wiki.dragino.com/index.php/Main_Page#Use_Note_for_Server]]
25 +** Use HEX format to send a downlink: [[TTN v3>>Notes for TTN]]
26 +** Use Base64 format to send a downlink: [[Chirpstack>>Notes for ChirpStack]]
27 +** See use note for more serves [[Servers Note>>doc:Main.WebHome]](IoT LoRaWAN Server)
25 25  
29 +
30 +
26 26  = 3. Support End Node and firmware version =
27 27  
28 -(% border="1" style="background-color:#ffffcc; border:1; color:green; width:995.222px" %)
29 -|=(% colspan="3" style="width: 992px;" %)(((
33 +
34 +(% border="1" style="background-color:#ffffcc; color:green; width:966px" %)
35 +|=(% colspan="3" style="width: 963px;" %)(((
30 30  Dragino STM32 base hardware Firmware / LoRaWAN stack list
31 31  )))
32 32  |(% style="width:187px" %)(((
33 33  **Model**
34 -)))|(% style="width:349px" %)(((
40 +)))|(% style="width:330px" %)(((
35 35  **Description**
36 -)))|(% style="width:453px" %)(((
42 +)))|(% style="width:445px" %)(((
37 37  **Firmware Version <~-~-> Stack Version**
38 38  )))
39 39  |(% style="width:187px" %)(((
40 40  [[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],
41 -)))|(% style="width:349px" %)(((
47 +)))|(% style="width:330px" %)(((
42 42  Open Source Generic LoRaWAN Sensor Node
43 -)))|(% style="width:453px" %)(((
49 +)))|(% style="width:445px" %)(((
44 44  (((
45 45  LSN50 v1.6.0 <~-~-> DR-LWS-003;
46 46  )))
... ... @@ -53,9 +53,9 @@
53 53  )))
54 54  |(% style="width:187px" %)(((
55 55  [[LGT92>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/142-lgt-92.html]],
56 -)))|(% style="width:349px" %)(((
62 +)))|(% style="width:330px" %)(((
57 57  LoRaWAN GPS Tracker
58 -)))|(% style="width:453px" %)(((
64 +)))|(% style="width:445px" %)(((
59 59  (((
60 60  LGT92 v1.6.3 <~-~-> DR-LWS-003;
61 61  )))
... ... @@ -68,23 +68,23 @@
68 68  )))
69 69  |(% style="width:187px" %)(((
70 70  [[LBT1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/165-lbt1.html]],
71 -)))|(% style="width:349px" %)(((
77 +)))|(% style="width:330px" %)(((
72 72  LoRaWAN BLE Indoor Tracker
73 -)))|(% style="width:453px" %)(((
79 +)))|(% style="width:445px" %)(((
74 74  LBT1 v1.0 <~-~-> DR-LWS-005;
75 75  )))
76 76  |(% style="width:187px" %)(((
77 77  [[RS485-LN>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/154-rs485-ln.html]],
78 -)))|(% style="width:349px" %)(((
84 +)))|(% style="width:330px" %)(((
79 79  LoRaWAN RS485 Modbus Converter
80 -)))|(% style="width:453px" %)(((
86 +)))|(% style="width:445px" %)(((
81 81  RS485-LN v1.3 <~-~-> DR-LWS-005;
82 82  )))
83 83  |(% style="width:187px" %)(((
84 84  [[LHT65>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/151-lht65.html]],
85 -)))|(% style="width:349px" %)(((
91 +)))|(% style="width:330px" %)(((
86 86  LoRaWAN Temperature & Humidity Sensor
87 -)))|(% style="width:453px" %)(((
93 +)))|(% style="width:445px" %)(((
88 88  (((
89 89  LHT65 v1.7 <~-~-> DR-LWS-003;
90 90  )))
... ... @@ -96,16 +96,17 @@
96 96  )))
97 97  )))
98 98  
105 +
106 +
99 99  = 4. System Management Commands =
100 100  
109 +
101 101  == 4.1 Change Uplink Interval ==
102 102  
112 +
103 103  Feature: Change LoRaWAN End Node Transmit Interval.
104 104  
105 -(% class="box infomessage" %)
106 -(((
107 -**AT Command: AT+TDC**
108 -)))
115 +(% style="color:blue" %)**AT Command: AT+TDC**
109 109  
110 110  (% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
111 111  |=(% colspan="3" style="width: 724px;" %)AT+TDC
... ... @@ -119,11 +119,11 @@
119 119  Set transmit interval to 60000ms = 60 seconds
120 120  )))
121 121  
122 -{{info}}
123 -**Downlink Command: 0x01**
124 -{{/info}}
125 -
126 126  (((
130 +
131 +
132 +(% style="color:blue" %)**Downlink Command: 0x01**
133 +
127 127  Format: Command Code (0x01) followed by 3 bytes time value.
128 128  )))
129 129  
... ... @@ -134,14 +134,17 @@
134 134  * **Example 1**: Downlink Payload:** 0100001E** ~/~/ Set Transmit Interval (TDC) = 30 seconds
135 135  * **Example 2**: Downlink Payload:** 0100003C** ~/~/ Set Transmit Interval (TDC) = 60 seconds
136 136  
144 +
145 +
137 137  == 4.2 Reboot End Node ==
138 138  
148 +
139 139  Feature: Reboot End Node to perform a new OTAA or ABP Join.
140 140  
141 -{{info}}
142 -**AT Command: ATZ**
143 -{{/info}}
144 144  
152 +(% style="color:blue" %)**AT Command: ATZ**
153 +
154 +
145 145  (% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
146 146  |=(% colspan="3" %)ATZ: Trig a reset of the MCU
147 147  |**Command Example**|**Function**|**Response**
... ... @@ -159,21 +159,26 @@
159 159  <followed by the Tx and Rx information>
160 160  )))
161 161  
162 -{{info}}
163 -**Downlink Command: 0x04**
164 -{{/info}}
165 165  
173 +(% style="color:blue" %)**Downlink Command: 0x04**
174 +
175 +
176 +(((
166 166  Format: Command Code (0x04) followed by FF.
178 +)))
167 167  
180 +(((
168 168  If the downlink payload=**04FF**, the end node will reboot.
169 169  
183 +
184 +)))
185 +
170 170  == 4.3 Reset to factory Default ==
171 171  
188 +
172 172  Feature: Reset the parameters to Factory Default, factory default value depends on the firmware settings, the OTAA and ABP keys will reserve after this command.
173 173  
174 -{{info}}
175 -**AT Command: AT+FDR**
176 -{{/info}}
191 +(% style="color:blue" %)**AT Command: AT+FDR**
177 177  
178 178  (% border="1" style="background-color:#ffffcc; color:green; width:831.222px" %)
179 179  |=(% colspan="3" style="width: 828px;" %)Reset to factory default
... ... @@ -192,13 +192,17 @@
192 192  Please set the parameters or reset Device to apply change
193 193  )))
194 194  
195 -{{info}}
196 -**Downlink Command: 0x04**
197 -{{/info}}
198 198  
211 +(% style="color:blue" %)**Downlink Command: 0x04**
212 +
213 +
214 +(((
199 199  Format: Command Code (0x04) followed by FE.
216 +)))
200 200  
218 +(((
201 201  If the downlink payload=**04FE**, Reset Parameters to Factory Default, Keys Reserve.
220 +)))
202 202  
203 203  
204 204  == 4.4 Show Firmware Version ==
... ... @@ -205,36 +205,42 @@
205 205  
206 206  Feature: Show firmware version. No downlink command yet.
207 207  
208 -{{info}}
209 -**AT Command: AT+VER**
210 -{{/info}}
211 211  
212 -(% border="1" style="background-color:#ffffcc; color:green" %)
213 -|=(% colspan="3" %)AT+VER: Image Version and Frequency Band
214 -|**Command Example**|**Function**|**Response**
215 -|AT+VER=?|Show Image version and Frequency Band|(((
228 +(% style="color:blue" %)**AT Command: AT+VER**
229 +
230 +
231 +(% border="1" style="background-color:#ffffcc; color:green; width:586px" %)
232 +|=(% colspan="3" style="width: 583px;" %)AT+VER: Image Version and Frequency Band
233 +|(% style="width:170px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:113px" %)**Response**
234 +|(% style="width:170px" %)AT+VER=?|(% style="width:300px" %)Show Image version and Frequency Band|(% style="width:113px" %)(((
216 216  1.3 EU868
217 217  
218 218  OK
219 219  )))
220 220  
221 -{{info}}
222 -**Downlink Command: 0x26 (Valid in 006 stack)**
223 -{{/info}}
224 224  
241 +(% style="color:blue" %)**Downlink Command: 0x26 (Valid in 006 stack)**
242 +
243 +
244 +(((
225 225  Downlink Format: 0x26
246 +)))
226 226  
227 227  (((
228 228  Device will reply with firmware version info, device info. frequency band info. detail please check device user manual. Total 5 bytes Example: If device is of firmware version 1.1.0 Upload: xx ~-~- yy ~-~- zz ~-~- 110 total 5 bytes
229 229  )))
230 230  
252 +(((
231 231  **xx: Software Type:**
254 +)))
232 232  
233 233  * 0x00 01: LGT92 Version
234 234  * 0x00 02: LBT1
235 235  * 0x00 03: LSE01/LDDS75/LDDS20/LSPH01/LLMS01/LSNPK01
236 236  
260 +(((
237 237  **yy: Frequency Band:**
262 +)))
238 238  
239 239  * 0x01: EU868
240 240  * 0x02: US915
... ... @@ -247,7 +247,9 @@
247 247  * 0x09: AS923-2
248 248  * 0xa0: AS923-3
249 249  
275 +(((
250 250  **zz: Subband**
277 +)))
251 251  
252 252  firmware version: v1.1.0 ~-~-> 110
253 253  
... ... @@ -256,10 +256,10 @@
256 256  
257 257  Feature: Show All configure. No downlink command yet.
258 258  
259 -{{info}}
260 -**AT Command: AT+CFG**
261 -{{/info}}
262 262  
287 +(% style="color:blue" %)**AT Command: AT+CFG**
288 +
289 +
263 263  (% border="1" style="background-color:#ffffcc; color:green; width:599.222px" %)
264 264  |=(% colspan="3" style="width: 596px;" %)AT+CFG: Print all configurations
265 265  |(% style="width:160px" %)**Command Example**|(% style="width:154px" %)**Function**|(% style="width:280px" %)**Response**
... ... @@ -283,10 +283,10 @@
283 283  
284 284  Feature: Get or Set the Application EUI.
285 285  
286 -{{info}}
287 -**AT Command: AT+APPEUI**
288 -{{/info}}
289 289  
314 +(% style="color:blue" %)**AT Command: AT+APPEUI**
315 +
316 +
290 290  (% border="1" style="background-color:#ffffcc; color:green; width:686.222px" %)
291 291  |=(% colspan="3" style="width: 683px;" %)AT+APPEUI
292 292  |(% style="width:305px" %)**Command Example**|(% style="width:186px" %)**Function**|(% style="width:191px" %)**Response**
... ... @@ -299,10 +299,10 @@
299 299  
300 300  Feature: Get or Set the Application Key.
301 301  
302 -{{info}}
303 -**AT Command: AT+APPKEY**
304 -{{/info}}
305 305  
330 +(% style="color:blue" %)**AT Command: AT+APPKEY**
331 +
332 +
306 306  (% border="1" style="background-color:#ffffcc; color:green; width:976.222px" %)
307 307  |=(% colspan="3" style="width: 973px;" %)AT+APPKEY
308 308  |(% style="width:441px" %)**Command Example**|(% style="width:180px" %)**Function**|(% style="width:350px" %)**Response**
... ... @@ -315,10 +315,10 @@
315 315  
316 316  Feature: Get or Set the Application Session Key.
317 317  
318 -{{info}}
319 -**AT Command: AT+APPSKEY**
320 -{{/info}}
321 321  
346 +(% style="color:blue" %)**AT Command: AT+APPSKEY**
347 +
348 +
322 322  (% border="1" style="background-color:#ffffcc; color:green; width:1040.22px" %)
323 323  |=(% colspan="3" style="width: 1037px;" %)AT+APPSKEY
324 324  |(% style="width:451px" %)**Command Example**|(% style="width:231px" %)**Function**|(% style="width:354px" %)**Response**
... ... @@ -333,10 +333,10 @@
333 333  
334 334  Feature: Get or Set the Device Address.
335 335  
336 -{{info}}
337 -**AT Command: AT+DADDR**
338 -{{/info}}
339 339  
364 +(% style="color:blue" %)**AT Command: AT+DADDR**
365 +
366 +
340 340  (% border="1" style="background-color:#ffffcc; color:green; width:795.222px" %)
341 341  |=(% colspan="3" style="width: 792px;" %)AT+DADDR
342 342  |(% style="width:192px" %)**Command Example**|(% style="width:241px" %)**Function**|(% style="width:359px" %)**Response**
... ... @@ -351,10 +351,10 @@
351 351  
352 352  Feature: Get or Set the Device EUI.
353 353  
354 -{{info}}
355 -**AT Command: AT+DEUI**
356 -{{/info}}
357 357  
382 +(% style="color:blue" %)**AT Command: AT+DEUI**
383 +
384 +
358 358  (% border="1" style="background-color:#ffffcc; color:green; width:1035.22px" %)
359 359  |=(% colspan="3" style="width: 1032px;" %)AT+DEUI
360 360  |(% style="width:250px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:634px" %)**Response**
... ... @@ -369,10 +369,10 @@
369 369  
370 370  Feature: Get or Set the Network ID.(You can enter this command change only after successful network connection)
371 371  
372 -{{info}}
373 -**AT Command: AT+NWKID**
374 -{{/info}}
375 375  
400 +(% style="color:blue" %)**AT Command: AT+NWKID**
401 +
402 +
376 376  (% border="1" style="background-color:#ffffcc; color:green; width:448.222px" %)
377 377  |=(% colspan="3" style="width: 445px;" %)AT+NWKID
378 378  |(% style="width:191px" %)**Command Example**|(% style="width:153px" %)**Function**|(% style="width:101px" %)**Response**
... ... @@ -385,10 +385,10 @@
385 385  
386 386  Feature: Get or Set the Network Session Key
387 387  
388 -{{info}}
389 -**AT Command: AT+NWKSKEY**
390 -{{/info}}
391 391  
416 +(% style="color:blue" %)**AT Command: AT+NWKSKEY**
417 +
418 +
392 392  (% border="1" style="background-color:#ffffcc; color:green; width:1017.22px" %)
393 393  |=(% colspan="3" style="width: 1014px;" %)AT+NWKSKEY
394 394  |(% style="width:455px" %)**Command Example**|(% style="width:215px" %)**Function**|(% style="width:343px" %)**Response**
... ... @@ -401,12 +401,14 @@
401 401  
402 402  == 6.1 Confirm Mode ==
403 403  
431 +=== AT+CFM command before DR-LWS007 software stack ===
432 +
404 404  Feature: Get or Set the confirmation mode (0-1).
405 405  
406 -{{info}}
407 -**AT Command: AT+CFM**
408 -{{/info}}
409 409  
436 +(% style="color:blue" %)**AT Command: AT+CFM**
437 +
438 +
410 410  (% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
411 411  |=(% colspan="3" style="width: 707px;" %)AT+CFM
412 412  |(% style="width:155px" %)**Command Example**|(% style="width:205px" %)**Function**|(% style="width:346px" %)**Response**
... ... @@ -416,7 +416,7 @@
416 416  |(% style="width:155px" %)AT+CFM=1|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)OK
417 417  |(% style="width:155px" %)AT+CFM=2|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)While Error in format, return AT_PARAM_ERROR
418 418  
419 -Downlink Command: 0x05
448 +(% style="color:blue" %)**Downlink Command: 0x05**
420 420  
421 421  Format: Command Code (0x05) followed by 2 bytes mode value.
422 422  
... ... @@ -425,14 +425,62 @@
425 425  * Example 1: Downlink Payload: 0501 ~/~/ Set AT+CFM=1
426 426  * Example 2: Downlink Payload: 0500 ~/~/ Set AT+CFM=0
427 427  
457 +=== AT+CFM command since DR-LWS007 software stack ===
458 +
459 +
460 +(% style="color:blue" %)**AT Command: AT+CFM**
461 +
462 +
463 +(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
464 +|=(% colspan="3" style="width: 707px;" %)AT+CFM
465 +|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
466 +|(% style="width:160px" %)(((
467 +AT+CFM=1,0,0
468 +
469 +value1
470 +)))|(% style="width:198px" %)confirmed uplink|(% style="width:349px" %)(((
471 +1
472 +
473 +OK
474 +)))
475 +|(% style="width:160px" %)(((
476 +AT+CFM=0,?,0
477 +
478 +value2
479 +)))|(% style="width:198px" %)set max retry , range: 0 ~~ 7|(% style="width:349px" %)(((
480 +0~~7
481 +
482 +OK
483 +)))
484 +|(% style="width:160px" %)(((
485 +AT+CFM=0,0,1
486 +
487 +value3
488 +)))|(% style="width:198px" %)uplink fcnt increase by 1 for each retry|(% style="width:349px" %)(((
489 +1
490 +
491 +OK
492 +)))
493 +
494 +
495 +(% style="color:blue" %)**Downlink Command: 0x05**
496 +
497 +
498 +Format: Command Code (0x05) followed by 2 bytes mode value.
499 +
500 +If the downlink payload=05010101, it means set end node to use confirm mode, while type code is 05.
501 +
502 +* Example 1: Downlink Payload: 05010101 ~/~/ Set AT+CFM=1,1,1
503 +* Example 2: Downlink Payload: 05000700 ~/~/ Set AT+CFM=0,7,0
504 +
428 428  == 6.2 Confirm Status ==
429 429  
430 430  Feature: Get confirmation status of the last AT+SEND (0-1).
431 431  
432 -{{info}}
433 -**AT Command: AT+CFS**
434 -{{/info}}
435 435  
510 +(% style="color:blue" %)**AT Command: AT+CFS**
511 +
512 +
436 436  (% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
437 437  |=(% colspan="3" style="width: 531px;" %)AT+CFS
438 438  |(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:178px" %)**Response**
... ... @@ -444,10 +444,10 @@
444 444  
445 445  Feature: Join network.
446 446  
447 -{{info}}
448 -**AT Command: AT+JOIN**
449 -{{/info}}
450 450  
525 +(% style="color:blue" %)**AT Command: AT+JOIN**
526 +
527 +
451 451  (% border="1" style="background-color:#ffffcc; color:green; width:647.222px" %)
452 452  |=(% colspan="3" style="width: 644px;" %)AT+JOIN
453 453  |(% style="width:163px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:334px" %)**Response**
... ... @@ -461,10 +461,10 @@
461 461  
462 462  Feature: Get or Set the Network Join Mode. (0: ABP, 1: OTAA).
463 463  
464 -{{info}}
465 -**AT Command: AT+NJM**
466 -{{/info}}
467 467  
542 +(% style="color:blue" %)**AT Command: AT+NJM**
543 +
544 +
468 468  (% border="1" style="background-color:#ffffcc; color:green; width:753.222px" %)
469 469  |=(% colspan="3" style="width: 750px;" %)AT+NJM
470 470  |(% style="width:162px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:361px" %)**Response**
... ... @@ -474,15 +474,15 @@
474 474  |(% style="width:162px" %)AT+NJM=0|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)OK
475 475  |(% style="width:162px" %)AT+NJM=2|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)While Error in format, return AT_PARAM_ERROR
476 476  
477 -{{info}}
478 -**Downlink Command: 0x20**
479 -{{/info}}
480 480  
555 +(% style="color:blue" %)**Downlink Command: 0x20**
556 +
557 +
481 481  Format: Command Code (0x20) followed by 1 bytes mode value.
482 482  
483 483  If the downlink payload=2000, it means set the Network Join Mode, while type code is 20.
484 484  
485 -* **Example 1: **Downlink Payload: **2000** ~/~/ Set AT+NJM=O
562 +* **Example 1: **Downlink Payload: **2000** ~/~/ Set AT+NJM=0
486 486  * **Example 2:** Downlink Payload: **2001** ~/~/ Set AT+NJM=1
487 487  
488 488  == 6.5 LoRa® Network Join Status ==
... ... @@ -489,10 +489,10 @@
489 489  
490 490  Feature: LoRa® Network Join Status.
491 491  
492 -{{info}}
493 -**AT Command: AT+NJS**
494 -{{/info}}
495 495  
570 +(% style="color:blue" %)**AT Command: AT+NJS**
571 +
572 +
496 496  (% border="1" style="background-color:#ffffcc; color:green; width:498.222px" %)
497 497  |=(% colspan="3" style="width: 495px;" %)AT+NJS
498 498  |(% style="width:169px" %)**Command Example**|(% style="width:164px" %)**Function**|(% style="width:161px" %)**Response**
... ... @@ -504,10 +504,10 @@
504 504  
505 505  Feature: Print Last Received Data in Raw Format<port:data>.
506 506  
507 -{{info}}
508 -**AT Command: AT+RECV**
509 -{{/info}}
510 510  
585 +(% style="color:blue" %)**AT Command: AT+RECV**
586 +
587 +
511 511  (% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
512 512  |=(% colspan="3" style="width: 584px;" %)AT+RECV
513 513  |(% style="width:161px" %)**Command Example**|(% style="width:272px" %)**Function**|(% style="width:150px" %)**Response**
... ... @@ -519,10 +519,10 @@
519 519  
520 520  Feature: Print Last Received Data in Binary Format<port:data>.
521 521  
522 -{{info}}
523 -**AT Command: AT+RECVB**
524 -{{/info}}
525 525  
600 +(% style="color:blue" %)**AT Command: AT+RECVB**
601 +
602 +
526 526  (% border="1" style="background-color:#ffffcc; color:green; width:793.222px" %)
527 527  |=(% colspan="3" style="width: 790px;" %)AT+RECVB
528 528  |(% style="width:173px" %)**Command Example**|(% style="width:497px" %)**Function**|(% style="width:120px" %)**Response**
... ... @@ -534,10 +534,10 @@
534 534  
535 535  Feature: Send Text Data<port:data>.
536 536  
537 -{{info}}
538 -**AT Command: AT+SEND**
539 -{{/info}}
540 540  
615 +(% style="color:blue" %)**AT Command: AT+SEND**
616 +
617 +
541 541  (% border="1" style="background-color:#ffffcc; color:green; width:991.222px" %)
542 542  |=(% colspan="3" style="width: 988px;" %)AT+SEND
543 543  |(% style="width:201px" %)**Command Example**|(% style="width:340px" %)**Function**|(% style="width:446px" %)**Response**
... ... @@ -553,10 +553,10 @@
553 553  
554 554  Feature: Send hexadecimal data along with the application port.
555 555  
556 -{{info}}
557 -**AT Command: AT+SENDB**
558 -{{/info}}
559 559  
634 +(% style="color:blue" %)**AT Command: AT+SENDB**
635 +
636 +
560 560  (% border="1" style="background-color:#ffffcc; color:green; width:1120.22px" %)
561 561  |=(% colspan="3" style="width: 1117px;" %)AT+SENDB
562 562  |(% style="width:257px" %)**Command Example**|(% style="width:406px" %)**Function**|(% style="width:453px" %)**Response**
... ... @@ -573,10 +573,10 @@
573 573  
574 574  Feature: Get or Set the Adaptive Data Rate setting. (0: off, 1: on).
575 575  
576 -{{info}}
577 -**AT Command: AT+ADR**
578 -{{/info}}
579 579  
654 +(% style="color:blue" %)**AT Command: AT+ADR**
655 +
656 +
580 580  (% border="1" style="background-color:#ffffcc; color:green; width:683.222px" %)
581 581  |=(% colspan="3" style="width: 680px;" %)AT+ADR
582 582  |(% style="width:162px" %)**Command Example**|(% style="width:266px" %)**Function**|(% style="width:250px" %)**Response**
... ... @@ -588,11 +588,11 @@
588 588  AT_PARAM_ERROR
589 589  )))
590 590  
591 -{{info}}
592 -**Downlink Command: 0x22**
593 -{{/info}}
594 594  
669 +(% style="color:blue" %)**Downlink Command: 0x22**
595 595  
671 +
672 +
596 596  If the downlink payload=2201, it means setting the adaptive data rate to 1, while type code is 22.
597 597  
598 598  * **Example 1**: Downlink Payload: **2201** ~/~/ Set AT+ADR=1.
... ... @@ -602,10 +602,10 @@
602 602  
603 603  Feature: Get or Set the Device Class(Currently only support class A, class C).
604 604  
605 -{{info}}
606 -**AT Command:AT+CLASS**
607 -{{/info}}
608 608  
683 +(% style="color:blue" %)**AT Command:AT+CLASS**
684 +
685 +
609 609  (% border="1" style="background-color:#ffffcc; color:green; width:507.222px" %)
610 610  |=(% colspan="3" style="width: 504px;" %)AT+CLASS
611 611  |(% style="width:163px" %)**Command Example**|(% style="width:166px" %)**Function**|(% style="width:175px" %)**Response**
... ... @@ -620,10 +620,10 @@
620 620  
621 621  Feature: Get or Set the ETSI Duty Cycle setting - 0=disable, 1=enable - Only for testing.
622 622  
623 -{{info}}
624 -**AT Command:AT+DCS**
625 -{{/info}}
626 626  
701 +(% style="color:blue" %)**AT Command:AT+DCS**
702 +
703 +
627 627  (% border="1" style="background-color:#ffffcc; color:green; width:515.222px" %)
628 628  |=(% colspan="3" style="width: 512px;" %)AT+DCS
629 629  |(% style="width:165px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:107px" %)**Response**
... ... @@ -638,10 +638,10 @@
638 638  
639 639  Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) . Note: while set Data Rate, please use set Adptive Data Rate, ADR=0 first. otherwise device will response to server's ADR command and change the DR to the setting from server
640 640  
641 -{{info}}
642 -**AT Command: AT+DR**
643 -{{/info}}
644 644  
719 +(% style="color:blue" %)**AT Command: AT+DR**
720 +
721 +
645 645  (% border="1" style="background-color:#ffffcc; color:green; width:466.222px" %)
646 646  |=(% colspan="3" style="width: 463px;" %)AT+DR
647 647  |(% style="width:156px" %)**Command Example**|(% style="width:167px" %)**Function**|(% style="width:140px" %)**Response**
... ... @@ -652,11 +652,11 @@
652 652  
653 653  )))
654 654  
655 -{{info}}
656 -**Downlink Command: 0x2200aaFF**
657 -{{/info}}
658 658  
733 +(% style="color:blue" %)**Downlink Command: 0x2200aaFF**
659 659  
735 +
736 +
660 660  If the downlink payload=220001FF, it means setting the data rate to 1, while type code is 22 00 aa FF.
661 661  
662 662  * **Example 1**: Downlink Payload: **220001FF** ~/~/ Set AT+DR=1.
... ... @@ -666,10 +666,10 @@
666 666  
667 667  Feature: Get or Set the Frame Counter Downlink.
668 668  
669 -{{info}}
670 -**AT Command:AT+FCD**
671 -{{/info}}
672 672  
747 +(% style="color:blue" %)**AT Command:AT+FCD**
748 +
749 +
673 673  (% border="1" style="background-color:#ffffcc; color:green; width:693.222px" %)
674 674  |=(% colspan="3" style="width: 690px;" %)AT+FCD
675 675  |(% style="width:162px" %)**Command Example**|(% style="width:258px" %)**Function**|(% style="width:269px" %)**Response**
... ... @@ -686,10 +686,10 @@
686 686  
687 687  Feature: Get or Set the Frame Counter Uplink.
688 688  
689 -{{info}}
690 -**AT Command:AT+FCU**
691 -{{/info}}
692 692  
767 +(% style="color:blue" %)**AT Command:AT+FCU**
768 +
769 +
693 693  (% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
694 694  |=(% colspan="3" style="width: 531px;" %)AT+FCU
695 695  |(% style="width:177px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:113px" %)**Response**
... ... @@ -704,10 +704,10 @@
704 704  
705 705  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 1 in ms.
706 706  
707 -{{info}}
708 -**AT Command:AT+JN1DL**
709 -{{/info}}
710 710  
785 +(% style="color:blue" %)**AT Command:AT+JN1DL**
786 +
787 +
711 711  (% border="1" style="background-color:#ffffcc; color:green; width:537.222px" %)
712 712  |=(% colspan="3" style="width: 534px;" %)AT+JN1DL
713 713  |(% style="width:164px" %)**Command Example**|(% style="width:229px" %)**Function**|(% style="width:140px" %)**Response**
... ... @@ -722,10 +722,10 @@
722 722  
723 723  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 2 in ms.
724 724  
725 -{{info}}
726 -**AT Command:AT+JN2DL**
727 -{{/info}}
728 728  
803 +(% style="color:blue" %)**AT Command:AT+JN2DL**
804 +
805 +
729 729  (% border="1" style="background-color:#ffffcc; color:green; width:538.222px" %)
730 730  |=(% colspan="3" style="width: 535px;" %)AT+JN2DL
731 731  |(% style="width:160px" %)**Command Example**|(% style="width:228px" %)**Function**|(% style="width:146px" %)**Response**
... ... @@ -738,12 +738,14 @@
738 738  
739 739  == 7.9 Public Network Mode ==
740 740  
741 -Feature: Get or Set the public network mode. (0: off, 1: on)
818 +Feature: Get or Set the public network mode. (0: off, 1: on). A Public LoRaWAN network use 0x34 as syncword. Default Settings; PNM=1
742 742  
743 -{{info}}
744 -**AT Command:AT+PNM**
745 -{{/info}}
820 +Notice: If user build their own LoRaWAN server but still use syncword=0x34, this is still considered a public LoRaWAN network
746 746  
822 +
823 +(% style="color:blue" %)**AT Command:AT+PNM**
824 +
825 +
747 747  (% border="1" style="background-color:#ffffcc; color:green; width:667.222px" %)
748 748  |=(% colspan="3" style="width: 664px;" %)AT+PNM
749 749  |(% style="width:166px" %)**Command Example**|(% style="width:225px" %)**Function**|(% style="width:272px" %)**Response**
... ... @@ -750,20 +750,25 @@
750 750  |(% style="width:166px" %)AT+PNM=?|(% style="width:225px" %)Get the public network mode.|(% style="width:272px" %)1(((
751 751  OK
752 752  )))
753 -|(% style="width:166px" %)AT+PNM=1|(% style="width:225px" %)Set the public network mode.|(% style="width:272px" %)(System will write new value to PNM)(((
832 +|(% style="width:166px" %)AT+PNM=1|(% style="width:225px" %)(((
833 +Set the public network mode.
834 +
835 +Set syncword=0x34
836 +)))|(% style="width:272px" %)(System will write new value to PNM)(((
754 754  OK
755 755  
756 756  
757 757  )))
841 +|(% style="width:166px" %)AT+PNM=0|(% style="width:225px" %)Set to use private network autoset syncword=0x12|(% style="width:272px" %)
758 758  
759 759  == 7.10 Receive Delay1 ==
760 760  
761 761  Feature: Get or Set the delay between the end of the Tx and the Rx Window 1 in ms
762 762  
763 -{{info}}
764 -**AT Command:AT+RX1DL**
765 -{{/info}}
766 766  
848 +(% style="color:blue" %)**AT Command:AT+RX1DL**
849 +
850 +
767 767  (% border="1" style="background-color:#ffffcc; color:green; width:408.222px" %)
768 768  |=(% colspan="3" style="width: 405px;" %)AT+RX1DL
769 769  |(% style="width:155px" %)**Command Example**|(% style="width:128px" %)**Function**|(% style="width:122px" %)**Response**
... ... @@ -774,14 +774,14 @@
774 774  
775 775  )))
776 776  
777 -== 7.11Receive Delay2 ==
861 +== 7.11 Receive Delay2 ==
778 778  
779 779  Feature: Get or Set the delay between the end of the Tx and the Rx Window 2 in ms
780 780  
781 -{{info}}
782 -**AT Command:AT+RX2DL**
783 -{{/info}}
784 784  
866 +(% style="color:blue" %)**AT Command:AT+RX2DL**
867 +
868 +
785 785  (% border="1" style="background-color:#ffffcc; color:green; width:481.222px" %)
786 786  |=(% colspan="3" style="width: 478px;" %)AT+RX2DL
787 787  |(% style="width:175px" %)**Command Example**|(% style="width:152px" %)**Function**|(% style="width:150px" %)**Response**
... ... @@ -796,10 +796,10 @@
796 796  
797 797  Feature: Get or Set the Rx2 window data rate (0-7 corresponding to DR_X)
798 798  
799 -{{info}}
800 -**AT Command:AT+RX2DR**
801 -{{/info}}
802 802  
884 +(% style="color:blue" %)**AT Command:AT+RX2DR**
885 +
886 +
803 803  (% border="1" style="background-color:#ffffcc; color:green; width:525.222px" %)
804 804  |=(% colspan="3" style="width: 522px;" %)AT+RX2DR
805 805  |(% style="width:160px" %)**Command Example**|(% style="width:232px" %)**Function**|(% style="width:130px" %)**Response**
... ... @@ -814,10 +814,10 @@
814 814  
815 815  Feature: Get or Set the Rx2 window frequency
816 816  
817 -{{info}}
818 -**AT Command:AT+RX2FQ**
819 -{{/info}}
820 820  
902 +(% style="color:blue" %)**AT Command:AT+RX2FQ**
903 +
904 +
821 821  (% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
822 822  |=(% colspan="3" style="width: 584px;" %)AT+RX2FQ
823 823  |(% style="width:183px" %)**Command Example**|(% style="width:240px" %)**Function**|(% style="width:160px" %)**Response**
... ... @@ -832,10 +832,10 @@
832 832  
833 833  Feature: Get or Set the Transmit Power(0-5, MAX:0, MIN:5, according to LoRaWAN Spec, or 40=10dB, 41 = 11dB, …, 50 = 20dB which is out of LoRaWAN spec. )
834 834  
835 -{{info}}
836 -**AT Command:AT+TXP**
837 -{{/info}}
838 838  
920 +(% style="color:blue" %)**AT Command:AT+TXP**
921 +
922 +
839 839  (% border="1" style="background-color:#ffffcc; color:green; width:465.222px" %)
840 840  |=(% colspan="3" style="width: 462px;" %)AT+TXP
841 841  |(% style="width:161px" %)**Command Example**|(% style="width:189px" %)**Function**|(% style="width:112px" %)**Response**
... ... @@ -857,10 +857,10 @@
857 857  
858 858  Feature: Get or Set the Rx2 window frequency
859 859  
860 -{{info}}
861 -**AT Command:AT+RSSI**
862 -{{/info}}
863 863  
945 +(% style="color:blue" %)**AT Command:AT+RSSI**
946 +
947 +
864 864  (% border="1" style="background-color:#ffffcc; color:green; width:557.222px" %)
865 865  |=(% colspan="3" style="width: 554px;" %)AT+RSSI
866 866  |(% style="width:164px" %)**Command Example**|(% style="width:289px" %)**Function**|(% style="width:100px" %)**Response**
... ... @@ -872,10 +872,10 @@
872 872  
873 873  Feature: Get the SNR of the last received packet
874 874  
875 -{{info}}
876 -**AT Command:AT+SNR**
877 -{{/info}}
878 878  
960 +(% style="color:blue" %)**AT Command:AT+SNR**
961 +
962 +
879 879  (% border="1" style="background-color:#ffffcc; color:green; width:571.222px" %)
880 880  |=(% colspan="3" style="width: 568px;" %)AT+SNR
881 881  |(% style="width:164px" %)**Command Example**|(% style="width:290px" %)**Function**|(% style="width:113px" %)**Response**
... ... @@ -887,10 +887,10 @@
887 887  
888 888  Feature: Get or set the application port.
889 889  
890 -{{info}}
891 -**AT Command: AT+PORT**
892 -{{/info}}
893 893  
975 +(% style="color:blue" %)**AT Command: AT+PORT**
976 +
977 +
894 894  (% border="1" style="background-color:#ffffcc; color:green; width:500.222px" %)
895 895  |=(% colspan="3" style="width: 497px;" %)AT+PORT
896 896  |(% style="width:157px" %)**Command Example**|(% style="width:204px" %)**Function**|(% style="width:135px" %)**Response**
... ... @@ -899,10 +899,10 @@
899 899  )))
900 900  |(% style="width:157px" %)AT+PORT=21|(% style="width:204px" %)Set the application port|(% style="width:135px" %)OK
901 901  
902 -{{info}}
903 -**Downlink Command: 0x23**
904 -{{/info}}
905 905  
987 +(% style="color:blue" %)**Downlink Command: 0x23**
988 +
989 +
906 906  Format: Command Code (0x23) followed by 1 bytes port value.
907 907  
908 908  If the downlink payload=2301, it means set the application port to 1, while type code is 23.
... ... @@ -914,10 +914,10 @@
914 914  
915 915  Feature:Get or Set Frequency (Unit: Hz) for Single Channel Mode.
916 916  
917 -{{info}}
918 -**AT Command: AT+CHS**
919 -{{/info}}
920 920  
1002 +(% style="color:blue" %)**AT Command: AT+CHS**
1003 +
1004 +
921 921  (% border="1" style="background-color:#ffffcc; color:green; width:603.222px" %)
922 922  |=(% colspan="3" style="width: 600px;" %)AT+CHS
923 923  |(% style="width:182px" %)**Command Example**|(% style="width:295px" %)**Function**|(% style="width:122px" %)**Response**
... ... @@ -975,10 +975,12 @@
975 975  **AT+RX1TWO** is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
976 976  )))
977 977  
978 -[[image:image-20220511120050-1.png]]
1062 +[[image:image-20220526162535-1.png]]
979 979  
980 980  (((
981 981  Increasing thisvalue is equal to extending the time that the receiving window is opened, butthe corresponding power consumption will also increase. Properly increasingthis value can increase the success rate of the downlink.
1066 +
1067 +
982 982  )))
983 983  
984 984  == 7.21 Get or Set RXwindows2 timeout ==
... ... @@ -1065,6 +1065,129 @@
1065 1065  * **Example 1**: Downlink Payload: **2101** ~/~/ set packet receiving response level to 1
1066 1066  * **Example 2**: Downlink Payload: **2102** ~/~/ set packet receiving response level to 2
1067 1067  
1154 +== 7.24 Controls NBTrans in unconfirmed uplink mode（LWS007 NBTrans:Set retransmission packets) ==
1155 +
1156 +{{info}}
1157 +**AT Command: AT+SETMAXNBTRANS **
1158 +{{/info}}
1159 +
1160 +(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1161 +|=(% colspan="3" style="width: 533px;" %)AT+**SETMAXNBTRANS**
1162 +|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1163 +|(% style="width:160px" %)**AT+SETMAXNBTRANS=1，0**|(% style="width:263px" %)Value1: set the maximum NBTrans.|(% style="width:109px" %)1(((
1164 +OK
1165 +)))
1166 +|(% style="width:160px" %)**AT+SETMAXNBTRANS=？，1**|(% style="width:263px" %)value2: 0: uplink fcnt doesn't change for each NBTrans; 1: uplink fcnt increase by 1 for each NBTrans.|(% style="width:109px" %)(((
1167 +1
1168 +
1169 +OK
1170 +)))
1171 +
1172 +{{info}}
1173 +**Downlink Command: 0x33**
1174 +{{/info}}
1175 +
1176 +Format: Command Code (0x33) followed by 2 bytes mode value.
1177 +
1178 +If the downlink payload=330100, it means set end node to use confirm mode, while type code is 33.
1179 +
1180 +* Example 1: Downlink Payload: 330100 ~/~/ Set AT+SETMAXNBTRANS=1,0
1181 +* Example 2: Downlink Payload: 330201 ~/~/ Set AT+SETMAXNBTRANS=2,1
1182 +
1183 +== 7.25 Device offline rejoining （LWS007) ==
1184 +
1185 +{{info}}
1186 +**AT Command: AT+DDETECT**
1187 +{{/info}}
1188 +
1189 +(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
1190 +|=(% colspan="3" style="width: 707px;" %)AT+**DDETECT**
1191 +|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
1192 +|(% style="width:160px" %)(((
1193 +AT+DDETECT=1,1440,2880
1194 +
1195 +value1
1196 +)))|(% style="width:198px" %)Enable online detect|(% style="width:349px" %)(((
1197 +1
1198 +
1199 +OK
1200 +)))
1201 +|(% style="width:160px" %)(((
1202 +AT+DDETECT=1,?,2880
1203 +
1204 +value2
1205 +)))|(% style="width:198px" %)Online detection packet sending time|(% style="width:349px" %)(((
1206 +
1207 +
1208 +OK
1209 +)))
1210 +|(% style="width:160px" %)(((
1211 +AT+DDETECT=1,1440,？
1212 +
1213 +value3
1214 +)))|(% style="width:198px" %)Process rejoin|(% style="width:349px" %)(((
1215 +
1216 +
1217 +OK
1218 +)))
1219 +
1220 +{{info}}
1221 +**Downlink Command: 0x33**
1222 +{{/info}}
1223 +
1224 +Format: Command Code (0x32) followed by 2 bytes mode value.
1225 +
1226 +If the downlink payload=320105A00B40, it means set end node to use confirm mode, while type code is 33.
1227 +
1228 +* Example 1: Downlink Payload: 320105A00B40 ~/~/ Set AT+DDETECT=1,1440,2880
1229 +
1230 +== 7.26 Request the server to send an ACK ==
1231 +
1232 +{{info}}
1233 +**AT Command: AT+PNACKMD**
1234 +{{/info}}
1235 +
1236 +(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1237 +|=(% colspan="3" style="width: 533px;" %)**AT+PNACKMD**
1238 +|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1239 +|(% style="width:160px" %)**AT+PNACKMD=1**|(% style="width:263px" %)If the node uploads the ACK as confirm, it will request the server to send an ACK. If the server ack is not received, the node will upload the packets that have not received the ACK the next time it receives the ACK|(% style="width:109px" %)1(((
1240 +OK
1241 +)))
1242 +|(% style="width:160px" %)**AT+PNACKMD=0**|(% style="width:263px" %)off request the server to send an ACK|(% style="width:109px" %)(((
1243 +0
1244 +
1245 +OK
1246 +)))
1247 +
1248 +== 7.27 Adjust network rejoining interval ==
1249 +
1250 +{{info}}
1251 +**AT Command: AT+RJTDC**
1252 +{{/info}}
1253 +
1254 +(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
1255 +|=(% colspan="3" style="width: 724px;" %)AT+RJTDC
1256 +|(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
1257 +|(% style="width:165px" %)AT+RJTDC=?|(% style="width:227px" %)Show the ReJoin data transmission interval in min|(% style="width:329px" %)30000(((
1258 +OK
1259 +
1260 +the interval is 30000ms = 30s
1261 +)))
1262 +|(% style="width:165px" %)AT+RJTDC=60000|(% style="width:227px" %)Set the ReJoin data transmission interval in min|(% style="width:329px" %)OK(((
1263 +Set the ReJoin data transmission interval to 60000ms = 60 seconds
1264 +)))
1265 +
1266 +{{info}}
1267 +**Downlink Command: 0x26**
1268 +{{/info}}
1269 +
1270 +Format: Command Code (0x26) followed by 2 bytes mode value.
1271 +
1272 +If the downlink payload=26000A, it means set end node to use confirm mode, while type code is 26.
1273 +
1274 +* Example 1: Downlink Payload: 26000A ~/~/ Set AT+RJTDC=10
1275 +* Example 2: Downlink Payload: 260002 ~/~/ Set AT+RJTDC=2
1276 +
1068 1068  = 8. AT Commands Combination =
1069 1069  
1070 1070  == 8.1 Set a fix RX2DR for downlink window ==
... ... @@ -1080,6 +1080,7 @@
1080 1080  
1081 1081  Same as:
1082 1082  
1083 -* AT+ADR=0 [[Reference>>http://8.211.40.43:8080/xwiki/bin/view/End%20Device%20AT%20Commands%20and%20Downlink%20Command/#Adaptive_Data_Rate]]
1084 -* AT+DR=5 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Data_Rate]]
1085 -* AT+TXP=0 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Transmit_Power]]
1292 +* AT+ADR=0  [[Reference>>||anchor="H7.1AdaptiveDataRate"]]
1293 +* AT+DR=5  [[Reference>>||anchor="H7.4DataRate"]]
1294 +* AT+TXP=0  [[Reference>>||anchor="H7.14TransmitPower"]]
1295 +~)~)~)
image-20220526162535-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +149.4 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0