Last modified by kai on 2024/09/06 10:00
<
From version < 15.5 >
edited by Xiaoling
on 2022/05/12 11:04
To version < 50.7 >
edited by Xiaoling
on 2022/07/13 13:32
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,10 +1,12 @@
1 -Contens
1 + **Table of** **Contents：**
2 2  
3 3  {{toc/}}
4 4  
5 5  
6 +
6 6  = 1. Introduction =
7 7  
9 +
8 8  Dragino LoRaWAN End Node support two types of AT Commands and Downlink Commands:
9 9  
10 10  * **Common Commands:** They should be available for each sensor, such as: change uplink interval, reset device.
... ... @@ -17,30 +17,34 @@
17 17  
18 18  = 2. How to use AT Commands or Downlink command =
19 19  
22 +
20 20  * For AT Command , See Devices User Manual for Device. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
21 21  * For LoRaWAN Downlink: The gateway transfer downlink command in HEX format. This page shows the HEX format downlink code for each command. but some servers use base64 as downlink code. Below are reference for how to use downlink command:
22 -** Use HEX format to send a downlink: [[TTN v3>>url:https://wiki.dragino.com/index.php/Notes_for_TTN#Send_Downlink_message]]
23 -** Use Base64 format to send a downlink: [[Chirpstack>>url:https://wiki.dragino.com/index.php/Notes_for_ChirpStack#Downlink]].
24 -** See use note for more serves [[Servers Note>>url:https://wiki.dragino.com/index.php/Main_Page#Use_Note_for_Server]]
25 +** Use HEX format to send a downlink: [[TTN v3>>Notes for TTN]]
26 +** Use Base64 format to send a downlink: [[Chirpstack>>Notes for ChirpStack]]
27 +** See use note for more serves [[Servers Note>>doc:Main.WebHome]](IoT LoRaWAN Server)
25 25  
29 +
30 +
26 26  = 3. Support End Node and firmware version =
27 27  
28 -(% border="1" style="background-color:#ffffcc; border:1; color:green; width:995.222px" %)
29 -|=(% colspan="3" style="width: 992px;" %)(((
33 +
34 +(% border="1" style="background-color:#ffffcc; color:green; width:966px" %)
35 +|=(% colspan="3" style="width: 963px;" %)(((
30 30  Dragino STM32 base hardware Firmware / LoRaWAN stack list
31 31  )))
32 32  |(% style="width:187px" %)(((
33 33  **Model**
34 -)))|(% style="width:349px" %)(((
40 +)))|(% style="width:330px" %)(((
35 35  **Description**
36 -)))|(% style="width:453px" %)(((
42 +)))|(% style="width:445px" %)(((
37 37  **Firmware Version <~-~-> Stack Version**
38 38  )))
39 39  |(% style="width:187px" %)(((
40 40  [[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],
41 -)))|(% style="width:349px" %)(((
47 +)))|(% style="width:330px" %)(((
42 42  Open Source Generic LoRaWAN Sensor Node
43 -)))|(% style="width:453px" %)(((
49 +)))|(% style="width:445px" %)(((
44 44  (((
45 45  LSN50 v1.6.0 <~-~-> DR-LWS-003;
46 46  )))
... ... @@ -53,9 +53,9 @@
53 53  )))
54 54  |(% style="width:187px" %)(((
55 55  [[LGT92>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/142-lgt-92.html]],
56 -)))|(% style="width:349px" %)(((
62 +)))|(% style="width:330px" %)(((
57 57  LoRaWAN GPS Tracker
58 -)))|(% style="width:453px" %)(((
64 +)))|(% style="width:445px" %)(((
59 59  (((
60 60  LGT92 v1.6.3 <~-~-> DR-LWS-003;
61 61  )))
... ... @@ -68,23 +68,23 @@
68 68  )))
69 69  |(% style="width:187px" %)(((
70 70  [[LBT1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/165-lbt1.html]],
71 -)))|(% style="width:349px" %)(((
77 +)))|(% style="width:330px" %)(((
72 72  LoRaWAN BLE Indoor Tracker
73 -)))|(% style="width:453px" %)(((
79 +)))|(% style="width:445px" %)(((
74 74  LBT1 v1.0 <~-~-> DR-LWS-005;
75 75  )))
76 76  |(% style="width:187px" %)(((
77 77  [[RS485-LN>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/154-rs485-ln.html]],
78 -)))|(% style="width:349px" %)(((
84 +)))|(% style="width:330px" %)(((
79 79  LoRaWAN RS485 Modbus Converter
80 -)))|(% style="width:453px" %)(((
86 +)))|(% style="width:445px" %)(((
81 81  RS485-LN v1.3 <~-~-> DR-LWS-005;
82 82  )))
83 83  |(% style="width:187px" %)(((
84 84  [[LHT65>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/151-lht65.html]],
85 -)))|(% style="width:349px" %)(((
91 +)))|(% style="width:330px" %)(((
86 86  LoRaWAN Temperature & Humidity Sensor
87 -)))|(% style="width:453px" %)(((
93 +)))|(% style="width:445px" %)(((
88 88  (((
89 89  LHT65 v1.7 <~-~-> DR-LWS-003;
90 90  )))
... ... @@ -96,16 +96,17 @@
96 96  )))
97 97  )))
98 98  
105 +
106 +
99 99  = 4. System Management Commands =
100 100  
109 +
101 101  == 4.1 Change Uplink Interval ==
102 102  
112 +
103 103  Feature: Change LoRaWAN End Node Transmit Interval.
104 104  
105 -(% class="box infomessage" %)
106 -(((
107 -**AT Command: AT+TDC**
108 -)))
115 +(% style="color:blue" %)**AT Command: AT+TDC**
109 109  
110 110  (% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
111 111  |=(% colspan="3" style="width: 724px;" %)AT+TDC
... ... @@ -119,11 +119,13 @@
119 119  Set transmit interval to 60000ms = 60 seconds
120 120  )))
121 121  
122 -{{info}}
123 -**Downlink Command: 0x01**
124 -{{/info}}
129 +(((
130 +
125 125  
132 +(% style="color:blue" %)**Downlink Command: 0x01**
133 +
126 126  Format: Command Code (0x01) followed by 3 bytes time value.
135 +)))
127 127  
128 128  (((
129 129  If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
... ... @@ -132,14 +132,17 @@
132 132  * **Example 1**: Downlink Payload:** 0100001E** ~/~/ Set Transmit Interval (TDC) = 30 seconds
133 133  * **Example 2**: Downlink Payload:** 0100003C** ~/~/ Set Transmit Interval (TDC) = 60 seconds
134 134  
144 +
145 +
135 135  == 4.2 Reboot End Node ==
136 136  
148 +
137 137  Feature: Reboot End Node to perform a new OTAA or ABP Join.
138 138  
139 -{{info}}
140 -**AT Command: ATZ**
141 -{{/info}}
142 142  
152 +(% style="color:blue" %)**AT Command: ATZ**
153 +
154 +
143 143  (% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
144 144  |=(% colspan="3" %)ATZ: Trig a reset of the MCU
145 145  |**Command Example**|**Function**|**Response**
... ... @@ -157,21 +157,26 @@
157 157  <followed by the Tx and Rx information>
158 158  )))
159 159  
160 -{{info}}
161 -**Downlink Command: 0x04**
162 -{{/info}}
163 163  
173 +(% style="color:blue" %)**Downlink Command: 0x04**
174 +
175 +
176 +(((
164 164  Format: Command Code (0x04) followed by FF.
178 +)))
165 165  
180 +(((
166 166  If the downlink payload=**04FF**, the end node will reboot.
167 167  
183 +
184 +)))
185 +
168 168  == 4.3 Reset to factory Default ==
169 169  
188 +
170 170  Feature: Reset the parameters to Factory Default, factory default value depends on the firmware settings, the OTAA and ABP keys will reserve after this command.
171 171  
172 -{{info}}
173 -**AT Command: AT+FDR**
174 -{{/info}}
191 +(% style="color:blue" %)**AT Command: AT+FDR**
175 175  
176 176  (% border="1" style="background-color:#ffffcc; color:green; width:831.222px" %)
177 177  |=(% colspan="3" style="width: 828px;" %)Reset to factory default
... ... @@ -190,13 +190,17 @@
190 190  Please set the parameters or reset Device to apply change
191 191  )))
192 192  
193 -{{info}}
194 -**Downlink Command: 0x04**
195 -{{/info}}
196 196  
211 +(% style="color:blue" %)**Downlink Command: 0x04**
212 +
213 +
214 +(((
197 197  Format: Command Code (0x04) followed by FE.
216 +)))
198 198  
218 +(((
199 199  If the downlink payload=**04FE**, Reset Parameters to Factory Default, Keys Reserve.
220 +)))
200 200  
201 201  
202 202  == 4.4 Show Firmware Version ==
... ... @@ -203,36 +203,42 @@
203 203  
204 204  Feature: Show firmware version. No downlink command yet.
205 205  
206 -{{info}}
207 -**AT Command: AT+VER**
208 -{{/info}}
209 209  
210 -(% border="1" style="background-color:#ffffcc; color:green" %)
211 -|=(% colspan="3" %)AT+VER: Image Version and Frequency Band
212 -|**Command Example**|**Function**|**Response**
213 -|AT+VER=?|Show Image version and Frequency Band|(((
228 +(% style="color:blue" %)**AT Command: AT+VER**
229 +
230 +
231 +(% border="1" style="background-color:#ffffcc; color:green; width:586px" %)
232 +|=(% colspan="3" style="width: 583px;" %)AT+VER: Image Version and Frequency Band
233 +|(% style="width:170px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:113px" %)**Response**
234 +|(% style="width:170px" %)AT+VER=?|(% style="width:300px" %)Show Image version and Frequency Band|(% style="width:113px" %)(((
214 214  1.3 EU868
215 215  
216 216  OK
217 217  )))
218 218  
219 -{{info}}
220 -**Downlink Command: 0x26 (Valid in 006 stack)**
221 -{{/info}}
222 222  
241 +(% style="color:blue" %)**Downlink Command: 0x26 (Valid in 006 stack)**
242 +
243 +
244 +(((
223 223  Downlink Format: 0x26
246 +)))
224 224  
225 225  (((
226 226  Device will reply with firmware version info, device info. frequency band info. detail please check device user manual. Total 5 bytes Example: If device is of firmware version 1.1.0 Upload: xx ~-~- yy ~-~- zz ~-~- 110 total 5 bytes
227 227  )))
228 228  
252 +(((
229 229  **xx: Software Type:**
254 +)))
230 230  
231 231  * 0x00 01: LGT92 Version
232 232  * 0x00 02: LBT1
233 233  * 0x00 03: LSE01/LDDS75/LDDS20/LSPH01/LLMS01/LSNPK01
234 234  
260 +(((
235 235  **yy: Frequency Band:**
262 +)))
236 236  
237 237  * 0x01: EU868
238 238  * 0x02: US915
... ... @@ -245,7 +245,9 @@
245 245  * 0x09: AS923-2
246 246  * 0xa0: AS923-3
247 247  
275 +(((
248 248  **zz: Subband**
277 +)))
249 249  
250 250  firmware version: v1.1.0 ~-~-> 110
251 251  
... ... @@ -254,10 +254,10 @@
254 254  
255 255  Feature: Show All configure. No downlink command yet.
256 256  
257 -{{info}}
258 -**AT Command: AT+CFG**
259 -{{/info}}
260 260  
287 +(% style="color:blue" %)**AT Command: AT+CFG**
288 +
289 +
261 261  (% border="1" style="background-color:#ffffcc; color:green; width:599.222px" %)
262 262  |=(% colspan="3" style="width: 596px;" %)AT+CFG: Print all configurations
263 263  |(% style="width:160px" %)**Command Example**|(% style="width:154px" %)**Function**|(% style="width:280px" %)**Response**
... ... @@ -281,10 +281,10 @@
281 281  
282 282  Feature: Get or Set the Application EUI.
283 283  
284 -{{info}}
285 -**AT Command: AT+APPEUI**
286 -{{/info}}
287 287  
314 +(% style="color:blue" %)**AT Command: AT+APPEUI**
315 +
316 +
288 288  (% border="1" style="background-color:#ffffcc; color:green; width:686.222px" %)
289 289  |=(% colspan="3" style="width: 683px;" %)AT+APPEUI
290 290  |(% style="width:305px" %)**Command Example**|(% style="width:186px" %)**Function**|(% style="width:191px" %)**Response**
... ... @@ -297,10 +297,10 @@
297 297  
298 298  Feature: Get or Set the Application Key.
299 299  
300 -{{info}}
301 -**AT Command: AT+APPKEY**
302 -{{/info}}
303 303  
330 +(% style="color:blue" %)**AT Command: AT+APPKEY**
331 +
332 +
304 304  (% border="1" style="background-color:#ffffcc; color:green; width:976.222px" %)
305 305  |=(% colspan="3" style="width: 973px;" %)AT+APPKEY
306 306  |(% style="width:441px" %)**Command Example**|(% style="width:180px" %)**Function**|(% style="width:350px" %)**Response**
... ... @@ -313,10 +313,10 @@
313 313  
314 314  Feature: Get or Set the Application Session Key.
315 315  
316 -{{info}}
317 -**AT Command: AT+APPSKEY**
318 -{{/info}}
319 319  
346 +(% style="color:blue" %)**AT Command: AT+APPSKEY**
347 +
348 +
320 320  (% border="1" style="background-color:#ffffcc; color:green; width:1040.22px" %)
321 321  |=(% colspan="3" style="width: 1037px;" %)AT+APPSKEY
322 322  |(% style="width:451px" %)**Command Example**|(% style="width:231px" %)**Function**|(% style="width:354px" %)**Response**
... ... @@ -331,10 +331,10 @@
331 331  
332 332  Feature: Get or Set the Device Address.
333 333  
334 -{{info}}
335 -**AT Command: AT+DADDR**
336 -{{/info}}
337 337  
364 +(% style="color:blue" %)**AT Command: AT+DADDR**
365 +
366 +
338 338  (% border="1" style="background-color:#ffffcc; color:green; width:795.222px" %)
339 339  |=(% colspan="3" style="width: 792px;" %)AT+DADDR
340 340  |(% style="width:192px" %)**Command Example**|(% style="width:241px" %)**Function**|(% style="width:359px" %)**Response**
... ... @@ -349,10 +349,10 @@
349 349  
350 350  Feature: Get or Set the Device EUI.
351 351  
352 -{{info}}
353 -**AT Command: AT+DEUI**
354 -{{/info}}
355 355  
382 +(% style="color:blue" %)**AT Command: AT+DEUI**
383 +
384 +
356 356  (% border="1" style="background-color:#ffffcc; color:green; width:1035.22px" %)
357 357  |=(% colspan="3" style="width: 1032px;" %)AT+DEUI
358 358  |(% style="width:250px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:634px" %)**Response**
... ... @@ -367,10 +367,10 @@
367 367  
368 368  Feature: Get or Set the Network ID.(You can enter this command change only after successful network connection)
369 369  
370 -{{info}}
371 -**AT Command: AT+NWKID**
372 -{{/info}}
373 373  
400 +(% style="color:blue" %)**AT Command: AT+NWKID**
401 +
402 +
374 374  (% border="1" style="background-color:#ffffcc; color:green; width:448.222px" %)
375 375  |=(% colspan="3" style="width: 445px;" %)AT+NWKID
376 376  |(% style="width:191px" %)**Command Example**|(% style="width:153px" %)**Function**|(% style="width:101px" %)**Response**
... ... @@ -383,10 +383,10 @@
383 383  
384 384  Feature: Get or Set the Network Session Key
385 385  
386 -{{info}}
387 -**AT Command: AT+NWKSKEY**
388 -{{/info}}
389 389  
416 +(% style="color:blue" %)**AT Command: AT+NWKSKEY**
417 +
418 +
390 390  (% border="1" style="background-color:#ffffcc; color:green; width:1017.22px" %)
391 391  |=(% colspan="3" style="width: 1014px;" %)AT+NWKSKEY
392 392  |(% style="width:455px" %)**Command Example**|(% style="width:215px" %)**Function**|(% style="width:343px" %)**Response**
... ... @@ -399,12 +399,14 @@
399 399  
400 400  == 6.1 Confirm Mode ==
401 401  
431 +=== AT+CFM command before DR-LWS007 software stack ===
432 +
402 402  Feature: Get or Set the confirmation mode (0-1).
403 403  
404 -{{info}}
405 -**AT Command: AT+CFM**
406 -{{/info}}
407 407  
436 +(% style="color:blue" %)**AT Command: AT+CFM**
437 +
438 +
408 408  (% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
409 409  |=(% colspan="3" style="width: 707px;" %)AT+CFM
410 410  |(% style="width:155px" %)**Command Example**|(% style="width:205px" %)**Function**|(% style="width:346px" %)**Response**
... ... @@ -414,7 +414,7 @@
414 414  |(% style="width:155px" %)AT+CFM=1|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)OK
415 415  |(% style="width:155px" %)AT+CFM=2|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)While Error in format, return AT_PARAM_ERROR
416 416  
417 -Downlink Command: 0x05
448 +(% style="color:blue" %)**Downlink Command: 0x05**
418 418  
419 419  Format: Command Code (0x05) followed by 2 bytes mode value.
420 420  
... ... @@ -423,14 +423,62 @@
423 423  * Example 1: Downlink Payload: 0501 ~/~/ Set AT+CFM=1
424 424  * Example 2: Downlink Payload: 0500 ~/~/ Set AT+CFM=0
425 425  
457 +=== AT+CFM command since DR-LWS007 software stack ===
458 +
459 +
460 +(% style="color:blue" %)**AT Command: AT+CFM**
461 +
462 +
463 +(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
464 +|=(% colspan="3" style="width: 707px;" %)AT+CFM
465 +|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
466 +|(% style="width:160px" %)(((
467 +AT+CFM=1,0,0
468 +
469 +value1
470 +)))|(% style="width:198px" %)confirmed uplink|(% style="width:349px" %)(((
471 +1
472 +
473 +OK
474 +)))
475 +|(% style="width:160px" %)(((
476 +AT+CFM=0,?,0
477 +
478 +value2
479 +)))|(% style="width:198px" %)set max retry , range: 0 ~~ 7|(% style="width:349px" %)(((
480 +0~~7
481 +
482 +OK
483 +)))
484 +|(% style="width:160px" %)(((
485 +AT+CFM=0,0,1
486 +
487 +value3
488 +)))|(% style="width:198px" %)uplink fcnt increase by 1 for each retry|(% style="width:349px" %)(((
489 +1
490 +
491 +OK
492 +)))
493 +
494 +
495 +(% style="color:blue" %)**Downlink Command: 0x05**
496 +
497 +
498 +Format: Command Code (0x05) followed by 2 bytes mode value.
499 +
500 +If the downlink payload=05010101, it means set end node to use confirm mode, while type code is 05.
501 +
502 +* Example 1: Downlink Payload: 05010101 ~/~/ Set AT+CFM=1,1,1
503 +* Example 2: Downlink Payload: 05000700 ~/~/ Set AT+CFM=0,7,0
504 +
426 426  == 6.2 Confirm Status ==
427 427  
428 428  Feature: Get confirmation status of the last AT+SEND (0-1).
429 429  
430 -{{info}}
431 -**AT Command: AT+CFS**
432 -{{/info}}
433 433  
510 +(% style="color:blue" %)**AT Command: AT+CFS**
511 +
512 +
434 434  (% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
435 435  |=(% colspan="3" style="width: 531px;" %)AT+CFS
436 436  |(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:178px" %)**Response**
... ... @@ -442,10 +442,10 @@
442 442  
443 443  Feature: Join network.
444 444  
445 -{{info}}
446 -**AT Command: AT+JOIN**
447 -{{/info}}
448 448  
525 +(% style="color:blue" %)**AT Command: AT+JOIN**
526 +
527 +
449 449  (% border="1" style="background-color:#ffffcc; color:green; width:647.222px" %)
450 450  |=(% colspan="3" style="width: 644px;" %)AT+JOIN
451 451  |(% style="width:163px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:334px" %)**Response**
... ... @@ -459,10 +459,10 @@
459 459  
460 460  Feature: Get or Set the Network Join Mode. (0: ABP, 1: OTAA).
461 461  
462 -{{info}}
463 -**AT Command: AT+NJM**
464 -{{/info}}
465 465  
542 +(% style="color:blue" %)**AT Command: AT+NJM**
543 +
544 +
466 466  (% border="1" style="background-color:#ffffcc; color:green; width:753.222px" %)
467 467  |=(% colspan="3" style="width: 750px;" %)AT+NJM
468 468  |(% style="width:162px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:361px" %)**Response**
... ... @@ -472,15 +472,15 @@
472 472  |(% style="width:162px" %)AT+NJM=0|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)OK
473 473  |(% style="width:162px" %)AT+NJM=2|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)While Error in format, return AT_PARAM_ERROR
474 474  
475 -{{info}}
476 -**Downlink Command: 0x20**
477 -{{/info}}
478 478  
555 +(% style="color:blue" %)**Downlink Command: 0x20**
556 +
557 +
479 479  Format: Command Code (0x20) followed by 1 bytes mode value.
480 480  
481 481  If the downlink payload=2000, it means set the Network Join Mode, while type code is 20.
482 482  
483 -* **Example 1: **Downlink Payload: **2000** ~/~/ Set AT+NJM=O
562 +* **Example 1: **Downlink Payload: **2000** ~/~/ Set AT+NJM=0
484 484  * **Example 2:** Downlink Payload: **2001** ~/~/ Set AT+NJM=1
485 485  
486 486  == 6.5 LoRa® Network Join Status ==
... ... @@ -487,10 +487,10 @@
487 487  
488 488  Feature: LoRa® Network Join Status.
489 489  
490 -{{info}}
491 -**AT Command: AT+NJS**
492 -{{/info}}
493 493  
570 +(% style="color:blue" %)**AT Command: AT+NJS**
571 +
572 +
494 494  (% border="1" style="background-color:#ffffcc; color:green; width:498.222px" %)
495 495  |=(% colspan="3" style="width: 495px;" %)AT+NJS
496 496  |(% style="width:169px" %)**Command Example**|(% style="width:164px" %)**Function**|(% style="width:161px" %)**Response**
... ... @@ -502,10 +502,10 @@
502 502  
503 503  Feature: Print Last Received Data in Raw Format<port:data>.
504 504  
505 -{{info}}
506 -**AT Command: AT+RECV**
507 -{{/info}}
508 508  
585 +(% style="color:blue" %)**AT Command: AT+RECV**
586 +
587 +
509 509  (% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
510 510  |=(% colspan="3" style="width: 584px;" %)AT+RECV
511 511  |(% style="width:161px" %)**Command Example**|(% style="width:272px" %)**Function**|(% style="width:150px" %)**Response**
... ... @@ -517,10 +517,10 @@
517 517  
518 518  Feature: Print Last Received Data in Binary Format<port:data>.
519 519  
520 -{{info}}
521 -**AT Command: AT+RECVB**
522 -{{/info}}
523 523  
600 +(% style="color:blue" %)**AT Command: AT+RECVB**
601 +
602 +
524 524  (% border="1" style="background-color:#ffffcc; color:green; width:793.222px" %)
525 525  |=(% colspan="3" style="width: 790px;" %)AT+RECVB
526 526  |(% style="width:173px" %)**Command Example**|(% style="width:497px" %)**Function**|(% style="width:120px" %)**Response**
... ... @@ -532,10 +532,10 @@
532 532  
533 533  Feature: Send Text Data<port:data>.
534 534  
535 -{{info}}
536 -**AT Command: AT+SEND**
537 -{{/info}}
538 538  
615 +(% style="color:blue" %)**AT Command: AT+SEND**
616 +
617 +
539 539  (% border="1" style="background-color:#ffffcc; color:green; width:991.222px" %)
540 540  |=(% colspan="3" style="width: 988px;" %)AT+SEND
541 541  |(% style="width:201px" %)**Command Example**|(% style="width:340px" %)**Function**|(% style="width:446px" %)**Response**
... ... @@ -551,10 +551,10 @@
551 551  
552 552  Feature: Send hexadecimal data along with the application port.
553 553  
554 -{{info}}
555 -**AT Command: AT+SENDB**
556 -{{/info}}
557 557  
634 +(% style="color:blue" %)**AT Command: AT+SENDB**
635 +
636 +
558 558  (% border="1" style="background-color:#ffffcc; color:green; width:1120.22px" %)
559 559  |=(% colspan="3" style="width: 1117px;" %)AT+SENDB
560 560  |(% style="width:257px" %)**Command Example**|(% style="width:406px" %)**Function**|(% style="width:453px" %)**Response**
... ... @@ -571,10 +571,10 @@
571 571  
572 572  Feature: Get or Set the Adaptive Data Rate setting. (0: off, 1: on).
573 573  
574 -{{info}}
575 -**AT Command: AT+ADR**
576 -{{/info}}
577 577  
654 +(% style="color:blue" %)**AT Command: AT+ADR**
655 +
656 +
578 578  (% border="1" style="background-color:#ffffcc; color:green; width:683.222px" %)
579 579  |=(% colspan="3" style="width: 680px;" %)AT+ADR
580 580  |(% style="width:162px" %)**Command Example**|(% style="width:266px" %)**Function**|(% style="width:250px" %)**Response**
... ... @@ -586,11 +586,11 @@
586 586  AT_PARAM_ERROR
587 587  )))
588 588  
589 -{{info}}
590 -**Downlink Command: 0x22**
591 -{{/info}}
592 592  
669 +(% style="color:blue" %)**Downlink Command: 0x22**
593 593  
671 +
672 +
594 594  If the downlink payload=2201, it means setting the adaptive data rate to 1, while type code is 22.
595 595  
596 596  * **Example 1**: Downlink Payload: **2201** ~/~/ Set AT+ADR=1.
... ... @@ -600,10 +600,10 @@
600 600  
601 601  Feature: Get or Set the Device Class(Currently only support class A, class C).
602 602  
603 -{{info}}
604 -**AT Command:AT+CLASS**
605 -{{/info}}
606 606  
683 +(% style="color:blue" %)**AT Command:AT+CLASS**
684 +
685 +
607 607  (% border="1" style="background-color:#ffffcc; color:green; width:507.222px" %)
608 608  |=(% colspan="3" style="width: 504px;" %)AT+CLASS
609 609  |(% style="width:163px" %)**Command Example**|(% style="width:166px" %)**Function**|(% style="width:175px" %)**Response**
... ... @@ -618,10 +618,10 @@
618 618  
619 619  Feature: Get or Set the ETSI Duty Cycle setting - 0=disable, 1=enable - Only for testing.
620 620  
621 -{{info}}
622 -**AT Command:AT+DCS**
623 -{{/info}}
624 624  
701 +(% style="color:blue" %)**AT Command:AT+DCS**
702 +
703 +
625 625  (% border="1" style="background-color:#ffffcc; color:green; width:515.222px" %)
626 626  |=(% colspan="3" style="width: 512px;" %)AT+DCS
627 627  |(% style="width:165px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:107px" %)**Response**
... ... @@ -636,10 +636,10 @@
636 636  
637 637  Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) . Note: while set Data Rate, please use set Adptive Data Rate, ADR=0 first. otherwise device will response to server's ADR command and change the DR to the setting from server
638 638  
639 -{{info}}
640 -**AT Command: AT+DR**
641 -{{/info}}
642 642  
719 +(% style="color:blue" %)**AT Command: AT+DR**
720 +
721 +
643 643  (% border="1" style="background-color:#ffffcc; color:green; width:466.222px" %)
644 644  |=(% colspan="3" style="width: 463px;" %)AT+DR
645 645  |(% style="width:156px" %)**Command Example**|(% style="width:167px" %)**Function**|(% style="width:140px" %)**Response**
... ... @@ -650,11 +650,11 @@
650 650  
651 651  )))
652 652  
653 -{{info}}
654 -**Downlink Command: 0x2200aaFF**
655 -{{/info}}
656 656  
733 +(% style="color:blue" %)**Downlink Command: 0x2200aaFF**
657 657  
735 +
736 +
658 658  If the downlink payload=220001FF, it means setting the data rate to 1, while type code is 22 00 aa FF.
659 659  
660 660  * **Example 1**: Downlink Payload: **220001FF** ~/~/ Set AT+DR=1.
... ... @@ -664,10 +664,10 @@
664 664  
665 665  Feature: Get or Set the Frame Counter Downlink.
666 666  
667 -{{info}}
668 -**AT Command:AT+FCD**
669 -{{/info}}
670 670  
747 +(% style="color:blue" %)**AT Command:AT+FCD**
748 +
749 +
671 671  (% border="1" style="background-color:#ffffcc; color:green; width:693.222px" %)
672 672  |=(% colspan="3" style="width: 690px;" %)AT+FCD
673 673  |(% style="width:162px" %)**Command Example**|(% style="width:258px" %)**Function**|(% style="width:269px" %)**Response**
... ... @@ -684,10 +684,10 @@
684 684  
685 685  Feature: Get or Set the Frame Counter Uplink.
686 686  
687 -{{info}}
688 -**AT Command:AT+FCU**
689 -{{/info}}
690 690  
767 +(% style="color:blue" %)**AT Command:AT+FCU**
768 +
769 +
691 691  (% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
692 692  |=(% colspan="3" style="width: 531px;" %)AT+FCU
693 693  |(% style="width:177px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:113px" %)**Response**
... ... @@ -702,10 +702,10 @@
702 702  
703 703  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 1 in ms.
704 704  
705 -{{info}}
706 -**AT Command:AT+JN1DL**
707 -{{/info}}
708 708  
785 +(% style="color:blue" %)**AT Command:AT+JN1DL**
786 +
787 +
709 709  (% border="1" style="background-color:#ffffcc; color:green; width:537.222px" %)
710 710  |=(% colspan="3" style="width: 534px;" %)AT+JN1DL
711 711  |(% style="width:164px" %)**Command Example**|(% style="width:229px" %)**Function**|(% style="width:140px" %)**Response**
... ... @@ -720,10 +720,10 @@
720 720  
721 721  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 2 in ms.
722 722  
723 -{{info}}
724 -**AT Command:AT+JN2DL**
725 -{{/info}}
726 726  
803 +(% style="color:blue" %)**AT Command:AT+JN2DL**
804 +
805 +
727 727  (% border="1" style="background-color:#ffffcc; color:green; width:538.222px" %)
728 728  |=(% colspan="3" style="width: 535px;" %)AT+JN2DL
729 729  |(% style="width:160px" %)**Command Example**|(% style="width:228px" %)**Function**|(% style="width:146px" %)**Response**
... ... @@ -736,12 +736,14 @@
736 736  
737 737  == 7.9 Public Network Mode ==
738 738  
739 -Feature: Get or Set the public network mode. (0: off, 1: on)
818 +Feature: Get or Set the public network mode. (0: off, 1: on). A Public LoRaWAN network use 0x34 as syncword. Default Settings; PNM=1
740 740  
741 -{{info}}
742 -**AT Command:AT+PNM**
743 -{{/info}}
820 +Notice: If user build their own LoRaWAN server but still use syncword=0x34, this is still considered a public LoRaWAN network
744 744  
822 +
823 +(% style="color:blue" %)**AT Command:AT+PNM**
824 +
825 +
745 745  (% border="1" style="background-color:#ffffcc; color:green; width:667.222px" %)
746 746  |=(% colspan="3" style="width: 664px;" %)AT+PNM
747 747  |(% style="width:166px" %)**Command Example**|(% style="width:225px" %)**Function**|(% style="width:272px" %)**Response**
... ... @@ -748,20 +748,25 @@
748 748  |(% style="width:166px" %)AT+PNM=?|(% style="width:225px" %)Get the public network mode.|(% style="width:272px" %)1(((
749 749  OK
750 750  )))
751 -|(% style="width:166px" %)AT+PNM=1|(% style="width:225px" %)Set the public network mode.|(% style="width:272px" %)(System will write new value to PNM)(((
832 +|(% style="width:166px" %)AT+PNM=1|(% style="width:225px" %)(((
833 +Set the public network mode.
834 +
835 +Set syncword=0x34
836 +)))|(% style="width:272px" %)(System will write new value to PNM)(((
752 752  OK
753 753  
754 754  
755 755  )))
841 +|(% style="width:166px" %)AT+PNM=0|(% style="width:225px" %)Set to use private network autoset syncword=0x12|(% style="width:272px" %)
756 756  
757 757  == 7.10 Receive Delay1 ==
758 758  
759 759  Feature: Get or Set the delay between the end of the Tx and the Rx Window 1 in ms
760 760  
761 -{{info}}
762 -**AT Command:AT+RX1DL**
763 -{{/info}}
764 764  
848 +(% style="color:blue" %)**AT Command:AT+RX1DL**
849 +
850 +
765 765  (% border="1" style="background-color:#ffffcc; color:green; width:408.222px" %)
766 766  |=(% colspan="3" style="width: 405px;" %)AT+RX1DL
767 767  |(% style="width:155px" %)**Command Example**|(% style="width:128px" %)**Function**|(% style="width:122px" %)**Response**
... ... @@ -772,14 +772,14 @@
772 772  
773 773  )))
774 774  
775 -== 7.11Receive Delay2 ==
861 +== 7.11 Receive Delay2 ==
776 776  
777 777  Feature: Get or Set the delay between the end of the Tx and the Rx Window 2 in ms
778 778  
779 -{{info}}
780 -**AT Command:AT+RX2DL**
781 -{{/info}}
782 782  
866 +(% style="color:blue" %)**AT Command:AT+RX2DL**
867 +
868 +
783 783  (% border="1" style="background-color:#ffffcc; color:green; width:481.222px" %)
784 784  |=(% colspan="3" style="width: 478px;" %)AT+RX2DL
785 785  |(% style="width:175px" %)**Command Example**|(% style="width:152px" %)**Function**|(% style="width:150px" %)**Response**
... ... @@ -794,10 +794,10 @@
794 794  
795 795  Feature: Get or Set the Rx2 window data rate (0-7 corresponding to DR_X)
796 796  
797 -{{info}}
798 -**AT Command:AT+RX2DR**
799 -{{/info}}
800 800  
884 +(% style="color:blue" %)**AT Command:AT+RX2DR**
885 +
886 +
801 801  (% border="1" style="background-color:#ffffcc; color:green; width:525.222px" %)
802 802  |=(% colspan="3" style="width: 522px;" %)AT+RX2DR
803 803  |(% style="width:160px" %)**Command Example**|(% style="width:232px" %)**Function**|(% style="width:130px" %)**Response**
... ... @@ -812,10 +812,10 @@
812 812  
813 813  Feature: Get or Set the Rx2 window frequency
814 814  
815 -{{info}}
816 -**AT Command:AT+RX2FQ**
817 -{{/info}}
818 818  
902 +(% style="color:blue" %)**AT Command:AT+RX2FQ**
903 +
904 +
819 819  (% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
820 820  |=(% colspan="3" style="width: 584px;" %)AT+RX2FQ
821 821  |(% style="width:183px" %)**Command Example**|(% style="width:240px" %)**Function**|(% style="width:160px" %)**Response**
... ... @@ -830,10 +830,10 @@
830 830  
831 831  Feature: Get or Set the Transmit Power(0-5, MAX:0, MIN:5, according to LoRaWAN Spec, or 40=10dB, 41 = 11dB, …, 50 = 20dB which is out of LoRaWAN spec. )
832 832  
833 -{{info}}
834 -**AT Command:AT+TXP**
835 -{{/info}}
836 836  
920 +(% style="color:blue" %)**AT Command:AT+TXP**
921 +
922 +
837 837  (% border="1" style="background-color:#ffffcc; color:green; width:465.222px" %)
838 838  |=(% colspan="3" style="width: 462px;" %)AT+TXP
839 839  |(% style="width:161px" %)**Command Example**|(% style="width:189px" %)**Function**|(% style="width:112px" %)**Response**
... ... @@ -855,10 +855,10 @@
855 855  
856 856  Feature: Get or Set the Rx2 window frequency
857 857  
858 -{{info}}
859 -**AT Command:AT+RSSI**
860 -{{/info}}
861 861  
945 +(% style="color:blue" %)**AT Command:AT+RSSI**
946 +
947 +
862 862  (% border="1" style="background-color:#ffffcc; color:green; width:557.222px" %)
863 863  |=(% colspan="3" style="width: 554px;" %)AT+RSSI
864 864  |(% style="width:164px" %)**Command Example**|(% style="width:289px" %)**Function**|(% style="width:100px" %)**Response**
... ... @@ -870,10 +870,10 @@
870 870  
871 871  Feature: Get the SNR of the last received packet
872 872  
873 -{{info}}
874 -**AT Command:AT+SNR**
875 -{{/info}}
876 876  
960 +(% style="color:blue" %)**AT Command:AT+SNR**
961 +
962 +
877 877  (% border="1" style="background-color:#ffffcc; color:green; width:571.222px" %)
878 878  |=(% colspan="3" style="width: 568px;" %)AT+SNR
879 879  |(% style="width:164px" %)**Command Example**|(% style="width:290px" %)**Function**|(% style="width:113px" %)**Response**
... ... @@ -885,10 +885,10 @@
885 885  
886 886  Feature: Get or set the application port.
887 887  
888 -{{info}}
889 -**AT Command: AT+PORT**
890 -{{/info}}
891 891  
975 +(% style="color:blue" %)**AT Command: AT+PORT**
976 +
977 +
892 892  (% border="1" style="background-color:#ffffcc; color:green; width:500.222px" %)
893 893  |=(% colspan="3" style="width: 497px;" %)AT+PORT
894 894  |(% style="width:157px" %)**Command Example**|(% style="width:204px" %)**Function**|(% style="width:135px" %)**Response**
... ... @@ -897,10 +897,10 @@
897 897  )))
898 898  |(% style="width:157px" %)AT+PORT=21|(% style="width:204px" %)Set the application port|(% style="width:135px" %)OK
899 899  
900 -{{info}}
901 -**Downlink Command: 0x23**
902 -{{/info}}
903 903  
987 +(% style="color:blue" %)**Downlink Command: 0x23**
988 +
989 +
904 904  Format: Command Code (0x23) followed by 1 bytes port value.
905 905  
906 906  If the downlink payload=2301, it means set the application port to 1, while type code is 23.
... ... @@ -912,10 +912,10 @@
912 912  
913 913  Feature:Get or Set Frequency (Unit: Hz) for Single Channel Mode.
914 914  
915 -{{info}}
916 -**AT Command: AT+CHS**
917 -{{/info}}
918 918  
1002 +(% style="color:blue" %)**AT Command: AT+CHS**
1003 +
1004 +
919 919  (% border="1" style="background-color:#ffffcc; color:green; width:603.222px" %)
920 920  |=(% colspan="3" style="width: 600px;" %)AT+CHS
921 921  |(% style="width:182px" %)**Command Example**|(% style="width:295px" %)**Function**|(% style="width:122px" %)**Response**
... ... @@ -973,10 +973,12 @@
973 973  **AT+RX1TWO** is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
974 974  )))
975 975  
976 -[[image:image-20220511120050-1.png]]
1062 +[[image:image-20220526162535-1.png]]
977 977  
978 978  (((
979 979  Increasing thisvalue is equal to extending the time that the receiving window is opened, butthe corresponding power consumption will also increase. Properly increasingthis value can increase the success rate of the downlink.
1066 +
1067 +
980 980  )))
981 981  
982 982  == 7.21 Get or Set RXwindows2 timeout ==
... ... @@ -1063,6 +1063,129 @@
1063 1063  * **Example 1**: Downlink Payload: **2101** ~/~/ set packet receiving response level to 1
1064 1064  * **Example 2**: Downlink Payload: **2102** ~/~/ set packet receiving response level to 2
1065 1065  
1154 +== 7.24 Controls NBTrans in unconfirmed uplink mode（LWS007 NBTrans:Set retransmission packets) ==
1155 +
1156 +{{info}}
1157 +**AT Command: AT+SETMAXNBTRANS **
1158 +{{/info}}
1159 +
1160 +(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1161 +|=(% colspan="3" style="width: 533px;" %)AT+**SETMAXNBTRANS**
1162 +|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1163 +|(% style="width:160px" %)**AT+SETMAXNBTRANS=1，0**|(% style="width:263px" %)Value1: set the maximum NBTrans.|(% style="width:109px" %)1(((
1164 +OK
1165 +)))
1166 +|(% style="width:160px" %)**AT+SETMAXNBTRANS=？，1**|(% style="width:263px" %)value2: 0: uplink fcnt doesn't change for each NBTrans; 1: uplink fcnt increase by 1 for each NBTrans.|(% style="width:109px" %)(((
1167 +1
1168 +
1169 +OK
1170 +)))
1171 +
1172 +{{info}}
1173 +**Downlink Command: 0x33**
1174 +{{/info}}
1175 +
1176 +Format: Command Code (0x33) followed by 2 bytes mode value.
1177 +
1178 +If the downlink payload=330100, it means set end node to use confirm mode, while type code is 33.
1179 +
1180 +* Example 1: Downlink Payload: 330100 ~/~/ Set AT+SETMAXNBTRANS=1,0
1181 +* Example 2: Downlink Payload: 330201 ~/~/ Set AT+SETMAXNBTRANS=2,1
1182 +
1183 +== 7.25 Device offline rejoining （LWS007) ==
1184 +
1185 +{{info}}
1186 +**AT Command: AT+DDETECT**
1187 +{{/info}}
1188 +
1189 +(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
1190 +|=(% colspan="3" style="width: 707px;" %)AT+**DDETECT**
1191 +|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
1192 +|(% style="width:160px" %)(((
1193 +AT+DDETECT=1,1440,2880
1194 +
1195 +value1
1196 +)))|(% style="width:198px" %)Enable online detect|(% style="width:349px" %)(((
1197 +1
1198 +
1199 +OK
1200 +)))
1201 +|(% style="width:160px" %)(((
1202 +AT+DDETECT=1,?,2880
1203 +
1204 +value2
1205 +)))|(% style="width:198px" %)Online detection packet sending time|(% style="width:349px" %)(((
1206 +
1207 +
1208 +OK
1209 +)))
1210 +|(% style="width:160px" %)(((
1211 +AT+DDETECT=1,1440,？
1212 +
1213 +value3
1214 +)))|(% style="width:198px" %)Process rejoin|(% style="width:349px" %)(((
1215 +
1216 +
1217 +OK
1218 +)))
1219 +
1220 +{{info}}
1221 +**Downlink Command: 0x33**
1222 +{{/info}}
1223 +
1224 +Format: Command Code (0x32) followed by 2 bytes mode value.
1225 +
1226 +If the downlink payload=320105A00B40, it means set end node to use confirm mode, while type code is 33.
1227 +
1228 +* Example 1: Downlink Payload: 320105A00B40 ~/~/ Set AT+DDETECT=1,1440,2880
1229 +
1230 +== 7.26 Request the server to send an ACK ==
1231 +
1232 +{{info}}
1233 +**AT Command: AT+PNACKMD**
1234 +{{/info}}
1235 +
1236 +(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1237 +|=(% colspan="3" style="width: 533px;" %)**AT+PNACKMD**
1238 +|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1239 +|(% style="width:160px" %)**AT+PNACKMD=1**|(% style="width:263px" %)If the node uploads the ACK as confirm, it will request the server to send an ACK. If the server ack is not received, the node will upload the packets that have not received the ACK the next time it receives the ACK|(% style="width:109px" %)1(((
1240 +OK
1241 +)))
1242 +|(% style="width:160px" %)**AT+PNACKMD=0**|(% style="width:263px" %)off request the server to send an ACK|(% style="width:109px" %)(((
1243 +0
1244 +
1245 +OK
1246 +)))
1247 +
1248 +== 7.27 Adjust network rejoining interval ==
1249 +
1250 +{{info}}
1251 +**AT Command: AT+RJTDC**
1252 +{{/info}}
1253 +
1254 +(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
1255 +|=(% colspan="3" style="width: 724px;" %)AT+RJTDC
1256 +|(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
1257 +|(% style="width:165px" %)AT+RJTDC=?|(% style="width:227px" %)Show the ReJoin data transmission interval in min|(% style="width:329px" %)30000(((
1258 +OK
1259 +
1260 +the interval is 30000ms = 30s
1261 +)))
1262 +|(% style="width:165px" %)AT+RJTDC=60000|(% style="width:227px" %)Set the ReJoin data transmission interval in min|(% style="width:329px" %)OK(((
1263 +Set the ReJoin data transmission interval to 60000ms = 60 seconds
1264 +)))
1265 +
1266 +{{info}}
1267 +**Downlink Command: 0x26**
1268 +{{/info}}
1269 +
1270 +Format: Command Code (0x26) followed by 2 bytes mode value.
1271 +
1272 +If the downlink payload=26000A, it means set end node to use confirm mode, while type code is 26.
1273 +
1274 +* Example 1: Downlink Payload: 26000A ~/~/ Set AT+RJTDC=10
1275 +* Example 2: Downlink Payload: 260002 ~/~/ Set AT+RJTDC=2
1276 +
1066 1066  = 8. AT Commands Combination =
1067 1067  
1068 1068  == 8.1 Set a fix RX2DR for downlink window ==
... ... @@ -1078,6 +1078,7 @@
1078 1078  
1079 1079  Same as:
1080 1080  
1081 -* AT+ADR=0 [[Reference>>http://8.211.40.43:8080/xwiki/bin/view/End%20Device%20AT%20Commands%20and%20Downlink%20Command/#Adaptive_Data_Rate]]
1082 -* AT+DR=5 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Data_Rate]]
1083 -* AT+TXP=0 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Transmit_Power]]
1292 +* AT+ADR=0  [[Reference>>||anchor="H7.1AdaptiveDataRate"]]
1293 +* AT+DR=5  [[Reference>>||anchor="H7.4DataRate"]]
1294 +* AT+TXP=0  [[Reference>>||anchor="H7.14TransmitPower"]]
1295 +~)~)~)
image-20220526162535-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +149.4 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0