Last modified by kai on 2024/09/06 10:00
<
From version < 15.3 >
edited by Xiaoling
on 2022/05/12 11:02
To version < 51.2 >
edited by Xiaoling
on 2022/07/13 14:04
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,10 +1,12 @@
1 -Contens
1 + **Table of** **Contents：**
2 2  
3 3  {{toc/}}
4 4  
5 5  
6 +
6 6  = 1. Introduction =
7 7  
9 +
8 8  Dragino LoRaWAN End Node support two types of AT Commands and Downlink Commands:
9 9  
10 10  * **Common Commands:** They should be available for each sensor, such as: change uplink interval, reset device.
... ... @@ -17,30 +17,35 @@
17 17  
18 18  = 2. How to use AT Commands or Downlink command =
19 19  
22 +
20 20  * For AT Command , See Devices User Manual for Device. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
21 21  * For LoRaWAN Downlink: The gateway transfer downlink command in HEX format. This page shows the HEX format downlink code for each command. but some servers use base64 as downlink code. Below are reference for how to use downlink command:
22 -** Use HEX format to send a downlink: [[TTN v3>>url:https://wiki.dragino.com/index.php/Notes_for_TTN#Send_Downlink_message]]
23 -** Use Base64 format to send a downlink: [[Chirpstack>>url:https://wiki.dragino.com/index.php/Notes_for_ChirpStack#Downlink]].
24 -** See use note for more serves [[Servers Note>>url:https://wiki.dragino.com/index.php/Main_Page#Use_Note_for_Server]]
25 +** Use HEX format to send a downlink: [[TTN v3>>Notes for TTN]]
26 +** Use Base64 format to send a downlink: [[Chirpstack>>Notes for ChirpStack]]
27 +** See use note for more serves [[Servers Note>>doc:Main.WebHome]](IoT LoRaWAN Server)
25 25  
29 +
30 +
31 +
26 26  = 3. Support End Node and firmware version =
27 27  
28 -(% border="1" style="background-color:#ffffcc; border:1; color:green; width:995.222px" %)
29 -|=(% colspan="3" style="width: 992px;" %)(((
34 +
35 +(% border="1" style="background-color:#ffffcc; color:green; width:966px" %)
36 +|=(% colspan="3" style="width: 963px;" %)(((
30 30  Dragino STM32 base hardware Firmware / LoRaWAN stack list
31 31  )))
32 32  |(% style="width:187px" %)(((
33 33  **Model**
34 -)))|(% style="width:349px" %)(((
41 +)))|(% style="width:330px" %)(((
35 35  **Description**
36 -)))|(% style="width:453px" %)(((
43 +)))|(% style="width:445px" %)(((
37 37  **Firmware Version <~-~-> Stack Version**
38 38  )))
39 39  |(% style="width:187px" %)(((
40 40  [[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],
41 -)))|(% style="width:349px" %)(((
48 +)))|(% style="width:330px" %)(((
42 42  Open Source Generic LoRaWAN Sensor Node
43 -)))|(% style="width:453px" %)(((
50 +)))|(% style="width:445px" %)(((
44 44  (((
45 45  LSN50 v1.6.0 <~-~-> DR-LWS-003;
46 46  )))
... ... @@ -53,9 +53,9 @@
53 53  )))
54 54  |(% style="width:187px" %)(((
55 55  [[LGT92>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/142-lgt-92.html]],
56 -)))|(% style="width:349px" %)(((
63 +)))|(% style="width:330px" %)(((
57 57  LoRaWAN GPS Tracker
58 -)))|(% style="width:453px" %)(((
65 +)))|(% style="width:445px" %)(((
59 59  (((
60 60  LGT92 v1.6.3 <~-~-> DR-LWS-003;
61 61  )))
... ... @@ -68,23 +68,23 @@
68 68  )))
69 69  |(% style="width:187px" %)(((
70 70  [[LBT1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/165-lbt1.html]],
71 -)))|(% style="width:349px" %)(((
78 +)))|(% style="width:330px" %)(((
72 72  LoRaWAN BLE Indoor Tracker
73 -)))|(% style="width:453px" %)(((
80 +)))|(% style="width:445px" %)(((
74 74  LBT1 v1.0 <~-~-> DR-LWS-005;
75 75  )))
76 76  |(% style="width:187px" %)(((
77 77  [[RS485-LN>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/154-rs485-ln.html]],
78 -)))|(% style="width:349px" %)(((
85 +)))|(% style="width:330px" %)(((
79 79  LoRaWAN RS485 Modbus Converter
80 -)))|(% style="width:453px" %)(((
87 +)))|(% style="width:445px" %)(((
81 81  RS485-LN v1.3 <~-~-> DR-LWS-005;
82 82  )))
83 83  |(% style="width:187px" %)(((
84 84  [[LHT65>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/151-lht65.html]],
85 -)))|(% style="width:349px" %)(((
92 +)))|(% style="width:330px" %)(((
86 86  LoRaWAN Temperature & Humidity Sensor
87 -)))|(% style="width:453px" %)(((
94 +)))|(% style="width:445px" %)(((
88 88  (((
89 89  LHT65 v1.7 <~-~-> DR-LWS-003;
90 90  )))
... ... @@ -96,17 +96,20 @@
96 96  )))
97 97  )))
98 98  
106 +
107 +
108 +
99 99  = 4. System Management Commands =
100 100  
111 +
101 101  == 4.1 Change Uplink Interval ==
102 102  
114 +
103 103  Feature: Change LoRaWAN End Node Transmit Interval.
104 104  
105 -(% class="box infomessage" %)
106 -(((
107 -**AT Command: AT+TDC**
108 -)))
109 109  
118 +(% style="color:blue" %)**AT Command: AT+TDC**
119 +
110 110  (% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
111 111  |=(% colspan="3" style="width: 724px;" %)AT+TDC
112 112  |(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
... ... @@ -119,11 +119,13 @@
119 119  Set transmit interval to 60000ms = 60 seconds
120 120  )))
121 121  
122 -{{info}}
123 -**Downlink Command: 0x01**
124 -{{/info}}
132 +(((
133 +
125 125  
135 +(% style="color:blue" %)**Downlink Command: 0x01**
136 +
126 126  Format: Command Code (0x01) followed by 3 bytes time value.
138 +)))
127 127  
128 128  (((
129 129  If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
... ... @@ -134,12 +134,12 @@
134 134  
135 135  == 4.2 Reboot End Node ==
136 136  
149 +
137 137  Feature: Reboot End Node to perform a new OTAA or ABP Join.
138 138  
139 -{{info}}
140 -**AT Command: ATZ**
141 -{{/info}}
142 142  
153 +(% style="color:blue" %)**AT Command: ATZ**
154 +
143 143  (% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
144 144  |=(% colspan="3" %)ATZ: Trig a reset of the MCU
145 145  |**Command Example**|**Function**|**Response**
... ... @@ -157,22 +157,26 @@
157 157  <followed by the Tx and Rx information>
158 158  )))
159 159  
160 -{{info}}
161 -**Downlink Command: 0x04**
162 -{{/info}}
172 +(% style="color:blue" %)**Downlink Command: 0x04**
163 163  
174 +(((
164 164  Format: Command Code (0x04) followed by FF.
176 +)))
165 165  
178 +(((
166 166  If the downlink payload=**04FF**, the end node will reboot.
167 167  
181 +
182 +)))
183 +
168 168  == 4.3 Reset to factory Default ==
169 169  
186 +
170 170  Feature: Reset the parameters to Factory Default, factory default value depends on the firmware settings, the OTAA and ABP keys will reserve after this command.
171 171  
172 -{{info}}
173 -**AT Command: AT+FDR**
174 -{{/info}}
175 175  
190 +(% style="color:blue" %)**AT Command: AT+FDR**
191 +
176 176  (% border="1" style="background-color:#ffffcc; color:green; width:831.222px" %)
177 177  |=(% colspan="3" style="width: 828px;" %)Reset to factory default
178 178  |(% style="width:181px" %)**Command Example**|(% style="width:181px" %)**Function**|(% style="width:465px" %)**Response**
... ... @@ -190,49 +190,61 @@
190 190  Please set the parameters or reset Device to apply change
191 191  )))
192 192  
193 -{{info}}
194 -**Downlink Command: 0x04**
195 -{{/info}}
209 +(% style="color:blue" %)**Downlink Command: 0x04**
196 196  
211 +(((
197 197  Format: Command Code (0x04) followed by FE.
213 +)))
198 198  
215 +(((
199 199  If the downlink payload=**04FE**, Reset Parameters to Factory Default, Keys Reserve.
217 +)))
200 200  
201 201  
202 202  == 4.4 Show Firmware Version ==
203 203  
222 +
204 204  Feature: Show firmware version. No downlink command yet.
205 205  
206 -{{info}}
207 -**AT Command: AT+VER**
208 -{{/info}}
209 209  
210 -(% border="1" style="background-color:#ffffcc; color:green" %)
211 -|=(% colspan="3" %)AT+VER: Image Version and Frequency Band
212 -|**Command Example**|**Function**|**Response**
213 -|AT+VER=?|Show Image version and Frequency Band|(((
226 +(% style="color:blue" %)**AT Command: AT+VER**
227 +
228 +(% border="1" style="background-color:#ffffcc; color:green; width:586px" %)
229 +|=(% colspan="3" style="width: 583px;" %)AT+VER: Image Version and Frequency Band
230 +|(% style="width:170px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:113px" %)**Response**
231 +|(% style="width:170px" %)AT+VER=?|(% style="width:300px" %)Show Image version and Frequency Band|(% style="width:113px" %)(((
214 214  1.3 EU868
215 215  
216 216  OK
217 217  )))
218 218  
219 -{{info}}
220 -**Downlink Command: 0x26 (Valid in 006 stack)**
221 -{{/info}}
237 +(% style="color:blue" %)**Downlink Command: 0x26 (Valid in 006 stack)**
222 222  
239 +(((
223 223  Downlink Format: 0x26
241 +)))
224 224  
225 225  (((
226 226  Device will reply with firmware version info, device info. frequency band info. detail please check device user manual. Total 5 bytes Example: If device is of firmware version 1.1.0 Upload: xx ~-~- yy ~-~- zz ~-~- 110 total 5 bytes
227 227  )))
228 228  
247 +(((
248 +
249 +
250 +
229 229  **xx: Software Type:**
252 +)))
230 230  
231 231  * 0x00 01: LGT92 Version
232 232  * 0x00 02: LBT1
233 233  * 0x00 03: LSE01/LDDS75/LDDS20/LSPH01/LLMS01/LSNPK01
234 234  
258 +(((
259 +
260 +
261 +
235 235  **yy: Frequency Band:**
263 +)))
236 236  
237 237  * 0x01: EU868
238 238  * 0x02: US915
... ... @@ -245,7 +245,12 @@
245 245  * 0x09: AS923-2
246 246  * 0xa0: AS923-3
247 247  
276 +(((
277 +
278 +
279 +
248 248  **zz: Subband**
281 +)))
249 249  
250 250  firmware version: v1.1.0 ~-~-> 110
251 251  
... ... @@ -252,12 +252,12 @@
252 252  
253 253  == 4.5 Show System Configure ==
254 254  
288 +
255 255  Feature: Show All configure. No downlink command yet.
256 256  
257 -{{info}}
258 -**AT Command: AT+CFG**
259 -{{/info}}
260 260  
292 +(% style="color:blue" %)**AT Command: AT+CFG**
293 +
261 261  (% border="1" style="background-color:#ffffcc; color:green; width:599.222px" %)
262 262  |=(% colspan="3" style="width: 596px;" %)AT+CFG: Print all configurations
263 263  |(% style="width:160px" %)**Command Example**|(% style="width:154px" %)**Function**|(% style="width:280px" %)**Response**
... ... @@ -277,14 +277,15 @@
277 277  
278 278  = 5. Keys, IDs and EUIs management =
279 279  
313 +
280 280  == 5.1 Application EUI ==
281 281  
316 +
282 282  Feature: Get or Set the Application EUI.
283 283  
284 -{{info}}
285 -**AT Command: AT+APPEUI**
286 -{{/info}}
287 287  
320 +(% style="color:blue" %)**AT Command: AT+APPEUI**
321 +
288 288  (% border="1" style="background-color:#ffffcc; color:green; width:686.222px" %)
289 289  |=(% colspan="3" style="width: 683px;" %)AT+APPEUI
290 290  |(% style="width:305px" %)**Command Example**|(% style="width:186px" %)**Function**|(% style="width:191px" %)**Response**
... ... @@ -295,12 +295,12 @@
295 295  
296 296  == 5.2 Application Key ==
297 297  
332 +
298 298  Feature: Get or Set the Application Key.
299 299  
300 -{{info}}
301 -**AT Command: AT+APPKEY**
302 -{{/info}}
303 303  
336 +(% style="color:blue" %)**AT Command: AT+APPKEY**
337 +
304 304  (% border="1" style="background-color:#ffffcc; color:green; width:976.222px" %)
305 305  |=(% colspan="3" style="width: 973px;" %)AT+APPKEY
306 306  |(% style="width:441px" %)**Command Example**|(% style="width:180px" %)**Function**|(% style="width:350px" %)**Response**
... ... @@ -311,12 +311,12 @@
311 311  
312 312  == 5.3 Application Session Key ==
313 313  
348 +
314 314  Feature: Get or Set the Application Session Key.
315 315  
316 -{{info}}
317 -**AT Command: AT+APPSKEY**
318 -{{/info}}
319 319  
352 +(% style="color:blue" %)**AT Command: AT+APPSKEY**
353 +
320 320  (% border="1" style="background-color:#ffffcc; color:green; width:1040.22px" %)
321 321  |=(% colspan="3" style="width: 1037px;" %)AT+APPSKEY
322 322  |(% style="width:451px" %)**Command Example**|(% style="width:231px" %)**Function**|(% style="width:354px" %)**Response**
... ... @@ -329,12 +329,12 @@
329 329  
330 330  == 5.4 Device Address ==
331 331  
366 +
332 332  Feature: Get or Set the Device Address.
333 333  
334 -{{info}}
335 -**AT Command: AT+DADDR**
336 -{{/info}}
337 337  
370 +(% style="color:blue" %)**AT Command: AT+DADDR**
371 +
338 338  (% border="1" style="background-color:#ffffcc; color:green; width:795.222px" %)
339 339  |=(% colspan="3" style="width: 792px;" %)AT+DADDR
340 340  |(% style="width:192px" %)**Command Example**|(% style="width:241px" %)**Function**|(% style="width:359px" %)**Response**
... ... @@ -347,12 +347,12 @@
347 347  
348 348  == 5.5 Device EUI ==
349 349  
384 +
350 350  Feature: Get or Set the Device EUI.
351 351  
352 -{{info}}
353 -**AT Command: AT+DEUI**
354 -{{/info}}
355 355  
388 +(% style="color:blue" %)**AT Command: AT+DEUI**
389 +
356 356  (% border="1" style="background-color:#ffffcc; color:green; width:1035.22px" %)
357 357  |=(% colspan="3" style="width: 1032px;" %)AT+DEUI
358 358  |(% style="width:250px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:634px" %)**Response**
... ... @@ -365,12 +365,12 @@
365 365  
366 366  == 5.6 Network ID ==
367 367  
402 +
368 368  Feature: Get or Set the Network ID.(You can enter this command change only after successful network connection)
369 369  
370 -{{info}}
371 -**AT Command: AT+NWKID**
372 -{{/info}}
373 373  
406 +(% style="color:blue" %)**AT Command: AT+NWKID**
407 +
374 374  (% border="1" style="background-color:#ffffcc; color:green; width:448.222px" %)
375 375  |=(% colspan="3" style="width: 445px;" %)AT+NWKID
376 376  |(% style="width:191px" %)**Command Example**|(% style="width:153px" %)**Function**|(% style="width:101px" %)**Response**
... ... @@ -381,12 +381,12 @@
381 381  
382 382  == 5.7 Network Session Key ==
383 383  
418 +
384 384  Feature: Get or Set the Network Session Key
385 385  
386 -{{info}}
387 -**AT Command: AT+NWKSKEY**
388 -{{/info}}
389 389  
422 +(% style="color:blue" %)**AT Command: AT+NWKSKEY**
423 +
390 390  (% border="1" style="background-color:#ffffcc; color:green; width:1017.22px" %)
391 391  |=(% colspan="3" style="width: 1014px;" %)AT+NWKSKEY
392 392  |(% style="width:455px" %)**Command Example**|(% style="width:215px" %)**Function**|(% style="width:343px" %)**Response**
... ... @@ -397,14 +397,18 @@
397 397  
398 398  = 6. Joining and sending date on LoRaWAN network =
399 399  
434 +
400 400  == 6.1 Confirm Mode ==
401 401  
437 +
438 +=== 6.1.1  AT+CFM command before DR-LWS007 software stack ===
439 +
440 +
402 402  Feature: Get or Set the confirmation mode (0-1).
403 403  
404 -{{info}}
405 -**AT Command: AT+CFM**
406 -{{/info}}
407 407  
444 +(% style="color:blue" %)**AT Command: AT+CFM**
445 +
408 408  (% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
409 409  |=(% colspan="3" style="width: 707px;" %)AT+CFM
410 410  |(% style="width:155px" %)**Command Example**|(% style="width:205px" %)**Function**|(% style="width:346px" %)**Response**
... ... @@ -414,7 +414,7 @@
414 414  |(% style="width:155px" %)AT+CFM=1|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)OK
415 415  |(% style="width:155px" %)AT+CFM=2|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)While Error in format, return AT_PARAM_ERROR
416 416  
417 -Downlink Command: 0x05
455 +(% style="color:blue" %)**Downlink Command: 0x05**
418 418  
419 419  Format: Command Code (0x05) followed by 2 bytes mode value.
420 420  
... ... @@ -423,14 +423,61 @@
423 423  * Example 1: Downlink Payload: 0501 ~/~/ Set AT+CFM=1
424 424  * Example 2: Downlink Payload: 0500 ~/~/ Set AT+CFM=0
425 425  
464 +
465 +=== 6.1.2  AT+CFM command since DR-LWS007 software stack ===
466 +
467 +
468 +(% style="color:blue" %)**AT Command: AT+CFM**
469 +
470 +(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
471 +|=(% colspan="3" style="width: 707px;" %)AT+CFM
472 +|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
473 +|(% style="width:160px" %)(((
474 +AT+CFM=1,0,0
475 +
476 +value1
477 +)))|(% style="width:198px" %)confirmed uplink|(% style="width:349px" %)(((
478 +1
479 +
480 +OK
481 +)))
482 +|(% style="width:160px" %)(((
483 +AT+CFM=0,?,0
484 +
485 +value2
486 +)))|(% style="width:198px" %)set max retry , range: 0 ~~ 7|(% style="width:349px" %)(((
487 +0~~7
488 +
489 +OK
490 +)))
491 +|(% style="width:160px" %)(((
492 +AT+CFM=0,0,1
493 +
494 +value3
495 +)))|(% style="width:198px" %)uplink fcnt increase by 1 for each retry|(% style="width:349px" %)(((
496 +1
497 +
498 +OK
499 +)))
500 +
501 +(% style="color:blue" %)**Downlink Command: 0x05**
502 +
503 +Format: Command Code (0x05) followed by 2 bytes mode value.
504 +
505 +If the downlink payload=05010101, it means set end node to use confirm mode, while type code is 05.
506 +
507 +* Example 1: Downlink Payload: 05010101 ~/~/ Set AT+CFM=1,1,1
508 +* Example 2: Downlink Payload: 05000700 ~/~/ Set AT+CFM=0,7,0
509 +
510 +
426 426  == 6.2 Confirm Status ==
427 427  
513 +
428 428  Feature: Get confirmation status of the last AT+SEND (0-1).
429 429  
430 -{{info}}
431 -**AT Command: AT+CFS**
432 -{{/info}}
433 433  
517 +(% style="color:blue" %)**AT Command: AT+CFS**
518 +
434 434  (% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
435 435  |=(% colspan="3" style="width: 531px;" %)AT+CFS
436 436  |(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:178px" %)**Response**
... ... @@ -440,12 +440,12 @@
440 440  
441 441  == 6.3 Join LoRa® Network ==
442 442  
528 +
443 443  Feature: Join network.
444 444  
445 -{{info}}
446 -**AT Command: AT+JOIN**
447 -{{/info}}
448 448  
532 +(% style="color:blue" %)**AT Command: AT+JOIN**
533 +
449 449  (% border="1" style="background-color:#ffffcc; color:green; width:647.222px" %)
450 450  |=(% colspan="3" style="width: 644px;" %)AT+JOIN
451 451  |(% style="width:163px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:334px" %)**Response**
... ... @@ -457,12 +457,12 @@
457 457  
458 458  == 6.4 LoRa® Network Join Mode ==
459 459  
545 +
460 460  Feature: Get or Set the Network Join Mode. (0: ABP, 1: OTAA).
461 461  
462 -{{info}}
463 -**AT Command: AT+NJM**
464 -{{/info}}
465 465  
549 +(% style="color:blue" %)**AT Command: AT+NJM**
550 +
466 466  (% border="1" style="background-color:#ffffcc; color:green; width:753.222px" %)
467 467  |=(% colspan="3" style="width: 750px;" %)AT+NJM
468 468  |(% style="width:162px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:361px" %)**Response**
... ... @@ -472,25 +472,24 @@
472 472  |(% style="width:162px" %)AT+NJM=0|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)OK
473 473  |(% style="width:162px" %)AT+NJM=2|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)While Error in format, return AT_PARAM_ERROR
474 474  
475 -{{info}}
476 -**Downlink Command: 0x20**
477 -{{/info}}
560 +(% style="color:blue" %)**Downlink Command: 0x20**
478 478  
479 479  Format: Command Code (0x20) followed by 1 bytes mode value.
480 480  
481 481  If the downlink payload=2000, it means set the Network Join Mode, while type code is 20.
482 482  
483 -* **Example 1: **Downlink Payload: **2000** ~/~/ Set AT+NJM=O
566 +* **Example 1: **Downlink Payload: **2000** ~/~/ Set AT+NJM=0
484 484  * **Example 2:** Downlink Payload: **2001** ~/~/ Set AT+NJM=1
485 485  
569 +
486 486  == 6.5 LoRa® Network Join Status ==
487 487  
572 +
488 488  Feature: LoRa® Network Join Status.
489 489  
490 -{{info}}
491 -**AT Command: AT+NJS**
492 -{{/info}}
493 493  
576 +(% style="color:blue" %)**AT Command: AT+NJS**
577 +
494 494  (% border="1" style="background-color:#ffffcc; color:green; width:498.222px" %)
495 495  |=(% colspan="3" style="width: 495px;" %)AT+NJS
496 496  |(% style="width:169px" %)**Command Example**|(% style="width:164px" %)**Function**|(% style="width:161px" %)**Response**
... ... @@ -500,12 +500,12 @@
500 500  
501 501  == 6.6 Print Last Received Data in Raw Format ==
502 502  
587 +
503 503  Feature: Print Last Received Data in Raw Format<port:data>.
504 504  
505 -{{info}}
506 -**AT Command: AT+RECV**
507 -{{/info}}
508 508  
591 +(% style="color:blue" %)**AT Command: AT+RECV**
592 +
509 509  (% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
510 510  |=(% colspan="3" style="width: 584px;" %)AT+RECV
511 511  |(% style="width:161px" %)**Command Example**|(% style="width:272px" %)**Function**|(% style="width:150px" %)**Response**
... ... @@ -515,12 +515,12 @@
515 515  
516 516  == 6.7 Print Last Received Data in Binary Format ==
517 517  
602 +
518 518  Feature: Print Last Received Data in Binary Format<port:data>.
519 519  
520 -{{info}}
521 -**AT Command: AT+RECVB**
522 -{{/info}}
523 523  
606 +(% style="color:blue" %)**AT Command: AT+RECVB**
607 +
524 524  (% border="1" style="background-color:#ffffcc; color:green; width:793.222px" %)
525 525  |=(% colspan="3" style="width: 790px;" %)AT+RECVB
526 526  |(% style="width:173px" %)**Command Example**|(% style="width:497px" %)**Function**|(% style="width:120px" %)**Response**
... ... @@ -530,12 +530,12 @@
530 530  
531 531  == 6.8 Send Text Data ==
532 532  
617 +
533 533  Feature: Send Text Data<port:data>.
534 534  
535 -{{info}}
536 -**AT Command: AT+SEND**
537 -{{/info}}
538 538  
621 +(% style="color:blue" %)**AT Command: AT+SEND**
622 +
539 539  (% border="1" style="background-color:#ffffcc; color:green; width:991.222px" %)
540 540  |=(% colspan="3" style="width: 988px;" %)AT+SEND
541 541  |(% style="width:201px" %)**Command Example**|(% style="width:340px" %)**Function**|(% style="width:446px" %)**Response**
... ... @@ -549,12 +549,12 @@
549 549  
550 550  == 6.9 Send Hexadecimal Data ==
551 551  
636 +
552 552  Feature: Send hexadecimal data along with the application port.
553 553  
554 -{{info}}
555 -**AT Command: AT+SENDB**
556 -{{/info}}
557 557  
640 +(% style="color:blue" %)**AT Command: AT+SENDB**
641 +
558 558  (% border="1" style="background-color:#ffffcc; color:green; width:1120.22px" %)
559 559  |=(% colspan="3" style="width: 1117px;" %)AT+SENDB
560 560  |(% style="width:257px" %)**Command Example**|(% style="width:406px" %)**Function**|(% style="width:453px" %)**Response**
... ... @@ -567,14 +567,15 @@
567 567  
568 568  = 7. LoRaWAN network management =
569 569  
654 +
570 570  == 7.1 Adaptive Data Rate ==
571 571  
657 +
572 572  Feature: Get or Set the Adaptive Data Rate setting. (0: off, 1: on).
573 573  
574 -{{info}}
575 -**AT Command: AT+ADR**
576 -{{/info}}
577 577  
661 +(% style="color:blue" %)**AT Command: AT+ADR**
662 +
578 578  (% border="1" style="background-color:#ffffcc; color:green; width:683.222px" %)
579 579  |=(% colspan="3" style="width: 680px;" %)AT+ADR
580 580  |(% style="width:162px" %)**Command Example**|(% style="width:266px" %)**Function**|(% style="width:250px" %)**Response**
... ... @@ -586,24 +586,22 @@
586 586  AT_PARAM_ERROR
587 587  )))
588 588  
589 -{{info}}
590 -**Downlink Command: 0x22**
591 -{{/info}}
674 +(% style="color:blue" %)**Downlink Command: 0x22**
592 592  
593 -
594 594  If the downlink payload=2201, it means setting the adaptive data rate to 1, while type code is 22.
595 595  
596 -* **Example 1**: Downlink Payload: **2201** ~/~/ Set AT+ADR=1.
678 +* **Example 1**: Downlink Payload: **2201**  ~/~/ Set AT+ADR=1.
597 597  * **Example 2**: Downlink Payload: **2200FFFF** ~/~/ Set AT+ADR=0.
598 598  
681 +
599 599  == 7.2 LoRa® Class ==
600 600  
684 +
601 601  Feature: Get or Set the Device Class(Currently only support class A, class C).
602 602  
603 -{{info}}
604 -**AT Command:AT+CLASS**
605 -{{/info}}
606 606  
688 +(% style="color:blue" %)**AT Command:AT+CLASS**
689 +
607 607  (% border="1" style="background-color:#ffffcc; color:green; width:507.222px" %)
608 608  |=(% colspan="3" style="width: 504px;" %)AT+CLASS
609 609  |(% style="width:163px" %)**Command Example**|(% style="width:166px" %)**Function**|(% style="width:175px" %)**Response**
... ... @@ -616,12 +616,12 @@
616 616  
617 617  == 7.3 Duty Cycle Setting ==
618 618  
702 +
619 619  Feature: Get or Set the ETSI Duty Cycle setting - 0=disable, 1=enable - Only for testing.
620 620  
621 -{{info}}
622 -**AT Command:AT+DCS**
623 -{{/info}}
624 624  
706 +(% style="color:blue" %)**AT Command:AT+DCS**
707 +
625 625  (% border="1" style="background-color:#ffffcc; color:green; width:515.222px" %)
626 626  |=(% colspan="3" style="width: 512px;" %)AT+DCS
627 627  |(% style="width:165px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:107px" %)**Response**
... ... @@ -634,12 +634,12 @@
634 634  
635 635  == 7.4 Data Rate ==
636 636  
720 +
637 637  Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) . Note: while set Data Rate, please use set Adptive Data Rate, ADR=0 first. otherwise device will response to server's ADR command and change the DR to the setting from server
638 638  
639 -{{info}}
640 -**AT Command: AT+DR**
641 -{{/info}}
642 642  
724 +(% style="color:blue" %)**AT Command: AT+DR**
725 +
643 643  (% border="1" style="background-color:#ffffcc; color:green; width:466.222px" %)
644 644  |=(% colspan="3" style="width: 463px;" %)AT+DR
645 645  |(% style="width:156px" %)**Command Example**|(% style="width:167px" %)**Function**|(% style="width:140px" %)**Response**
... ... @@ -650,24 +650,22 @@
650 650  
651 651  )))
652 652  
653 -{{info}}
654 -**Downlink Command: 0x2200aaFF**
655 -{{/info}}
736 +(% style="color:blue" %)**Downlink Command: 0x2200aaFF**
656 656  
657 -
658 658  If the downlink payload=220001FF, it means setting the data rate to 1, while type code is 22 00 aa FF.
659 659  
660 660  * **Example 1**: Downlink Payload: **220001FF** ~/~/ Set AT+DR=1.
661 661  * **Example 2**: Downlink Payload: **220000FF** ~/~/ Set AT+DR=0.
662 662  
743 +
663 663  == 7.5 Frame Counter Downlink ==
664 664  
746 +
665 665  Feature: Get or Set the Frame Counter Downlink.
666 666  
667 -{{info}}
668 -**AT Command:AT+FCD**
669 -{{/info}}
670 670  
750 +(% style="color:blue" %)**AT Command:AT+FCD**
751 +
671 671  (% border="1" style="background-color:#ffffcc; color:green; width:693.222px" %)
672 672  |=(% colspan="3" style="width: 690px;" %)AT+FCD
673 673  |(% style="width:162px" %)**Command Example**|(% style="width:258px" %)**Function**|(% style="width:269px" %)**Response**
... ... @@ -676,8 +676,6 @@
676 676  )))
677 677  |(% style="width:162px" %)AT+FCD=10|(% style="width:258px" %)Set the Frame Counter Downlink.|(% style="width:269px" %)(System will write new value to FCD)(((
678 678  OK
679 -
680 -
681 681  )))
682 682  
683 683  == 7.6 Frame Counter Uplink ==
... ... @@ -684,10 +684,9 @@
684 684  
685 685  Feature: Get or Set the Frame Counter Uplink.
686 686  
687 -{{info}}
688 -**AT Command:AT+FCU**
689 -{{/info}}
690 690  
767 +(% style="color:blue" %)**AT Command:AT+FCU**
768 +
691 691  (% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
692 692  |=(% colspan="3" style="width: 531px;" %)AT+FCU
693 693  |(% style="width:177px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:113px" %)**Response**
... ... @@ -700,12 +700,12 @@
700 700  
701 701  == 7.7 Join Accept Delay1 ==
702 702  
781 +
703 703  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 1 in ms.
704 704  
705 -{{info}}
706 -**AT Command:AT+JN1DL**
707 -{{/info}}
708 708  
785 +(% style="color:blue" %)**AT Command:AT+JN1DL**
786 +
709 709  (% border="1" style="background-color:#ffffcc; color:green; width:537.222px" %)
710 710  |=(% colspan="3" style="width: 534px;" %)AT+JN1DL
711 711  |(% style="width:164px" %)**Command Example**|(% style="width:229px" %)**Function**|(% style="width:140px" %)**Response**
... ... @@ -720,10 +720,9 @@
720 720  
721 721  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 2 in ms.
722 722  
723 -{{info}}
724 -**AT Command:AT+JN2DL**
725 -{{/info}}
726 726  
802 +(% style="color:blue" %)**AT Command:AT+JN2DL**
803 +
727 727  (% border="1" style="background-color:#ffffcc; color:green; width:538.222px" %)
728 728  |=(% colspan="3" style="width: 535px;" %)AT+JN2DL
729 729  |(% style="width:160px" %)**Command Example**|(% style="width:228px" %)**Function**|(% style="width:146px" %)**Response**
... ... @@ -736,12 +736,14 @@
736 736  
737 737  == 7.9 Public Network Mode ==
738 738  
739 -Feature: Get or Set the public network mode. (0: off, 1: on)
740 740  
741 -{{info}}
742 -**AT Command:AT+PNM**
743 -{{/info}}
817 +Feature: Get or Set the public network mode. (0: off, 1: on). A Public LoRaWAN network use 0x34 as syncword. Default Settings; PNM=1
744 744  
819 +(% style="color:red" %)Notice: If user build their own LoRaWAN server but still use syncword=0x34, this is still considered a public LoRaWAN network
820 +
821 +
822 +(% style="color:blue" %)**AT Command:AT+PNM**
823 +
745 745  (% border="1" style="background-color:#ffffcc; color:green; width:667.222px" %)
746 746  |=(% colspan="3" style="width: 664px;" %)AT+PNM
747 747  |(% style="width:166px" %)**Command Example**|(% style="width:225px" %)**Function**|(% style="width:272px" %)**Response**
... ... @@ -748,20 +748,25 @@
748 748  |(% style="width:166px" %)AT+PNM=?|(% style="width:225px" %)Get the public network mode.|(% style="width:272px" %)1(((
749 749  OK
750 750  )))
751 -|(% style="width:166px" %)AT+PNM=1|(% style="width:225px" %)Set the public network mode.|(% style="width:272px" %)(System will write new value to PNM)(((
830 +|(% style="width:166px" %)AT+PNM=1|(% style="width:225px" %)(((
831 +Set the public network mode.
832 +
833 +Set syncword=0x34
834 +)))|(% style="width:272px" %)(System will write new value to PNM)(((
752 752  OK
753 753  
754 754  
755 755  )))
839 +|(% style="width:166px" %)AT+PNM=0|(% style="width:225px" %)Set to use private network autoset syncword=0x12|(% style="width:272px" %)
756 756  
757 757  == 7.10 Receive Delay1 ==
758 758  
843 +
759 759  Feature: Get or Set the delay between the end of the Tx and the Rx Window 1 in ms
760 760  
761 -{{info}}
762 -**AT Command:AT+RX1DL**
763 -{{/info}}
764 764  
847 +(% style="color:blue" %)**AT Command:AT+RX1DL**
848 +
765 765  (% border="1" style="background-color:#ffffcc; color:green; width:408.222px" %)
766 766  |=(% colspan="3" style="width: 405px;" %)AT+RX1DL
767 767  |(% style="width:155px" %)**Command Example**|(% style="width:128px" %)**Function**|(% style="width:122px" %)**Response**
... ... @@ -772,14 +772,15 @@
772 772  
773 773  )))
774 774  
775 -== 7.11Receive Delay2 ==
776 776  
860 +== 7.11 Receive Delay2 ==
861 +
862 +
777 777  Feature: Get or Set the delay between the end of the Tx and the Rx Window 2 in ms
778 778  
779 -{{info}}
780 -**AT Command:AT+RX2DL**
781 -{{/info}}
782 782  
866 +(% style="color:blue" %)**AT Command:AT+RX2DL**
867 +
783 783  (% border="1" style="background-color:#ffffcc; color:green; width:481.222px" %)
784 784  |=(% colspan="3" style="width: 478px;" %)AT+RX2DL
785 785  |(% style="width:175px" %)**Command Example**|(% style="width:152px" %)**Function**|(% style="width:150px" %)**Response**
... ... @@ -790,14 +790,15 @@
790 790  
791 791  )))
792 792  
878 +
793 793  == 7.12 Rx2 Window Data Rate ==
794 794  
881 +
795 795  Feature: Get or Set the Rx2 window data rate (0-7 corresponding to DR_X)
796 796  
797 -{{info}}
798 -**AT Command:AT+RX2DR**
799 -{{/info}}
800 800  
885 +(% style="color:blue" %)**AT Command:AT+RX2DR**
886 +
801 801  (% border="1" style="background-color:#ffffcc; color:green; width:525.222px" %)
802 802  |=(% colspan="3" style="width: 522px;" %)AT+RX2DR
803 803  |(% style="width:160px" %)**Command Example**|(% style="width:232px" %)**Function**|(% style="width:130px" %)**Response**
... ... @@ -808,14 +808,15 @@
808 808  
809 809  )))
810 810  
897 +
811 811  == 7.13 Rx2 Window Frequency ==
812 812  
900 +
813 813  Feature: Get or Set the Rx2 window frequency
814 814  
815 -{{info}}
816 -**AT Command:AT+RX2FQ**
817 -{{/info}}
818 818  
904 +(% style="color:blue" %)**AT Command:AT+RX2FQ**
905 +
819 819  (% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
820 820  |=(% colspan="3" style="width: 584px;" %)AT+RX2FQ
821 821  |(% style="width:183px" %)**Command Example**|(% style="width:240px" %)**Function**|(% style="width:160px" %)**Response**
... ... @@ -826,14 +826,15 @@
826 826  
827 827  )))
828 828  
916 +
829 829  == 7.14 Transmit Power ==
830 830  
919 +
831 831  Feature: Get or Set the Transmit Power(0-5, MAX:0, MIN:5, according to LoRaWAN Spec, or 40=10dB, 41 = 11dB, …, 50 = 20dB which is out of LoRaWAN spec. )
832 832  
833 -{{info}}
834 -**AT Command:AT+TXP**
835 -{{/info}}
836 836  
923 +(% style="color:blue" %)**AT Command:AT+TXP**
924 +
837 837  (% border="1" style="background-color:#ffffcc; color:green; width:465.222px" %)
838 838  |=(% colspan="3" style="width: 462px;" %)AT+TXP
839 839  |(% style="width:161px" %)**Command Example**|(% style="width:189px" %)**Function**|(% style="width:112px" %)**Response**
... ... @@ -851,14 +851,16 @@
851 851  * **Example 1**: Downlink Payload: **22000102** ~/~/ Set AT+TXP=2.
852 852  * **Example 2**: Downlink Payload: **220000FF** ~/~/ Set AT+TXP=0.
853 853  
942 +
943 +
854 854  == 7.15 RSSI of the Last Received Packet ==
855 855  
946 +
856 856  Feature: Get or Set the Rx2 window frequency
857 857  
858 -{{info}}
859 -**AT Command:AT+RSSI**
860 -{{/info}}
861 861  
950 +(% style="color:blue" %)**AT Command:AT+RSSI**
951 +
862 862  (% border="1" style="background-color:#ffffcc; color:green; width:557.222px" %)
863 863  |=(% colspan="3" style="width: 554px;" %)AT+RSSI
864 864  |(% style="width:164px" %)**Command Example**|(% style="width:289px" %)**Function**|(% style="width:100px" %)**Response**
... ... @@ -866,14 +866,15 @@
866 866  OK
867 867  )))
868 868  
959 +
869 869  == 7.16 SNR of the Last Received Packet ==
870 870  
962 +
871 871  Feature: Get the SNR of the last received packet
872 872  
873 -{{info}}
874 -**AT Command:AT+SNR**
875 -{{/info}}
876 876  
966 +(% style="color:blue" %)**AT Command:AT+SNR**
967 +
877 877  (% border="1" style="background-color:#ffffcc; color:green; width:571.222px" %)
878 878  |=(% colspan="3" style="width: 568px;" %)AT+SNR
879 879  |(% style="width:164px" %)**Command Example**|(% style="width:290px" %)**Function**|(% style="width:113px" %)**Response**
... ... @@ -881,14 +881,15 @@
881 881  OK
882 882  )))
883 883  
975 +
884 884  == 7.17 Application Port ==
885 885  
978 +
886 886  Feature: Get or set the application port.
887 887  
888 -{{info}}
889 -**AT Command: AT+PORT**
890 -{{/info}}
891 891  
982 +(% style="color:blue" %)**AT Command: AT+PORT**
983 +
892 892  (% border="1" style="background-color:#ffffcc; color:green; width:500.222px" %)
893 893  |=(% colspan="3" style="width: 497px;" %)AT+PORT
894 894  |(% style="width:157px" %)**Command Example**|(% style="width:204px" %)**Function**|(% style="width:135px" %)**Response**
... ... @@ -897,9 +897,7 @@
897 897  )))
898 898  |(% style="width:157px" %)AT+PORT=21|(% style="width:204px" %)Set the application port|(% style="width:135px" %)OK
899 899  
900 -{{info}}
901 -**Downlink Command: 0x23**
902 -{{/info}}
992 +(% style="color:blue" %)**Downlink Command: 0x23**
903 903  
904 904  Format: Command Code (0x23) followed by 1 bytes port value.
905 905  
... ... @@ -908,14 +908,16 @@
908 908  * **Example 1**: Downlink Payload: **2301** ~/~/ set the application port to 1
909 909  * **Example 2**: Downlink Payload:** 2305** ~/~/ set the application port to 5
910 910  
1001 +
1002 +
911 911  == 7.18 Single Channel Mode ==
912 912  
1005 +
913 913  Feature:Get or Set Frequency (Unit: Hz) for Single Channel Mode.
914 914  
915 -{{info}}
916 -**AT Command: AT+CHS**
917 -{{/info}}
918 918  
1009 +(% style="color:blue" %)**AT Command: AT+CHS**
1010 +
919 919  (% border="1" style="background-color:#ffffcc; color:green; width:603.222px" %)
920 920  |=(% colspan="3" style="width: 600px;" %)AT+CHS
921 921  |(% style="width:182px" %)**Command Example**|(% style="width:295px" %)**Function**|(% style="width:122px" %)**Response**
... ... @@ -924,14 +924,14 @@
924 924  )))
925 925  |(% style="width:182px" %)AT+CHS=868100000|(% style="width:295px" %)Set Frequency for Single Channel Mode|(% style="width:122px" %)OK
926 926  
1019 +
927 927  == 7.19 Eight Channel Mode ==
928 928  
929 929  Feature: Get or Set eight channels mode,Only for US915,AU915,CN470.
930 930  
931 -{{info}}
932 -**AT Command: AT+CHE**
933 -{{/info}}
934 934  
1025 +(% style="color:blue" %)**AT Command: AT+CHE**
1026 +
935 935  (% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
936 936  |=(% colspan="3" style="width: 707px;" %)AT+CHE
937 937  |(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
... ... @@ -942,9 +942,7 @@
942 942  )))
943 943  |(% style="width:160px" %)AT+CHE=1|(% style="width:198px" %)Set eight channels mode|(% style="width:349px" %)OK
944 944  
945 -{{info}}
946 -**Downlink Command: 0x24**
947 -{{/info}}
1037 +(% style="color:blue" %)**Downlink Command: 0x24**
948 948  
949 949  Format: Command Code (0x24) followed by 1 bytes channel value.
950 950  
... ... @@ -953,14 +953,16 @@
953 953  * **Example 1**: Downlink Payload: 2401 ~/~/ set channel mode to 1
954 954  * **Example 2**: Downlink Payload: 2405 ~/~/ set channel mode to 5
955 955  
1046 +
1047 +
956 956  == 7.20 Get or Set RXwindows1 timeout ==
957 957  
958 -Feature:Get or Set the number of symbols to detect and timeout from RXwindow1(0 to 255).
959 959  
960 -{{info}}
961 -**AT Command: AT+RX1WTO**
962 -{{/info}}
1051 +Feature: Get or Set the number of symbols to detect and timeout from RXwindow1(0 to 255).
963 963  
1053 +
1054 +(% style="color:blue" %)**AT Command: AT+RX1WTO**
1055 +
964 964  (% border="1" style="background-color:#ffffcc; color:green; width:460.222px" %)
965 965  |=(% colspan="3" style="width: 457px;" %)AT+ RX1WTO
966 966  |(% style="width:163px" %)**Command Example**|(% style="width:201px" %)**Function**|(% style="width:93px" %)**Response**
... ... @@ -969,20 +969,31 @@
969 969  )))
970 970  |(% style="width:163px" %)AT+RX1WTO=60|(% style="width:201px" %)Set RXwindows1 timeout|(% style="width:93px" %)OK
971 971  
972 -AT+RX1TWO is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
1064 +(((
1065 +
973 973  
974 -[[image:image-20220511120050-1.png]]
1067 +**AT+RX1TWO** is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
975 975  
1069 +
1070 +)))
1071 +
1072 +[[image:image-20220526162535-1.png]]
1073 +
1074 +
1075 +(((
976 976  Increasing thisvalue is equal to extending the time that the receiving window is opened, butthe corresponding power consumption will also increase. Properly increasingthis value can increase the success rate of the downlink.
977 977  
1078 +
1079 +)))
1080 +
978 978  == 7.21 Get or Set RXwindows2 timeout ==
979 979  
980 -Feature:Get or Set the number of symbols to detect and timeout from RXwindow2(0 to 255).
981 981  
982 -{{info}}
983 -**AT Command: AT+RX2WTO**
984 -{{/info}}
1084 +Feature: Get or Set the number of symbols to detect and timeout from RXwindow2(0 to 255).
985 985  
1086 +
1087 +(% style="color:blue" %)**AT Command: AT+RX2WTO**
1088 +
986 986  (% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
987 987  |=(% colspan="3" style="width: 494px;" %)AT+ RX2WTO
988 988  |(% style="width:190px" %)**Command Example**|(% style="width:199px" %)**Function**|(% style="width:104px" %)**Response**
... ... @@ -991,14 +991,15 @@
991 991  )))
992 992  |(% style="width:190px" %)AT+RX2WTO=20|(% style="width:199px" %)Set RXwindows2 timeout|(% style="width:104px" %)OK
993 993  
1097 +
994 994  == 7.22 Setting up uplinkdwelltime (as923, au915) ==
995 995  
1100 +
996 996  Feature: Get or Set uplinkdwelltime
997 997  
998 -{{info}}
999 -**AT Command: AT+DWELLT**
1000 -{{/info}}
1001 1001  
1104 +(% style="color:blue" %)**AT Command: AT+DWELLT**
1105 +
1002 1002  (% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
1003 1003  |=(% colspan="3" style="width: 494px;" %)AT+DWELLT
1004 1004  |(% style="width:183px" %)**Command Example**|(% style="width:179px" %)**Function**|(% style="width:131px" %)**Response**
... ... @@ -1007,9 +1007,7 @@
1007 1007  )))
1008 1008  |(% style="width:183px" %)AT+DWELLT=0|(% style="width:179px" %)Set uplinkdwelltime|(% style="width:131px" %)OK
1009 1009  
1010 -{{info}}
1011 -**Downlink Command: 0x25**
1012 -{{/info}}
1114 +(% style="color:blue" %)**Downlink Command: 0x25**
1013 1013  
1014 1014  Format: Command Code (0x25) followed by 1 bytes state value.
1015 1015  
... ... @@ -1018,10 +1018,14 @@
1018 1018  * **Example 1**: Downlink Payload: **2501** ~/~/ set uplinkdwelltime to 1
1019 1019  * **Example 2**: Downlink Payload: **2500** ~/~/ set uplinkdwelltime to 0
1020 1020  
1123 +
1124 +
1021 1021  == 7.23 Set Packet Receiving Response Level ==
1022 1022  
1127 +
1023 1023  Feature: Get or Set packet receiving response level. This feature is used to set compatible with different LoRaWAN servers. If RPL doesn;t match , user will see strange message in the server portal.
1024 1024  
1130 +
1025 1025  RPL value:
1026 1026  
1027 1027  * **AT+RPL=0:** Device won't immediately reply any downlink commands from platform.
... ... @@ -1030,6 +1030,7 @@
1030 1030  * **AT+RPL=3:** Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command.
1031 1031  * **AT+RPL=4: **Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands.
1032 1032  
1139 +
1033 1033  Case Analyes:
1034 1034  
1035 1035  * For Class A devices, AT+RPL=0 is ok. that is defaut settings in software.
... ... @@ -1036,10 +1036,9 @@
1036 1036  * For Class C devices used in ChirpStack, need to set AT+RPL=4 because Chirpstack require immedietely reply message to MAC Command.
1037 1037  * For Class C devices used in TTI, need to set AT+RPL=4 because TTI require immediately reply message to Confirmed Data Down & MAC Command.
1038 1038  
1039 -{{info}}
1040 -**AT Command: AT+RPL**
1041 -{{/info}}
1042 1042  
1147 +(% style="color:blue" %)**AT Command: AT+RPL**
1148 +
1043 1043  (% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1044 1044  |=(% colspan="3" style="width: 533px;" %)AT+RPL
1045 1045  |(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
... ... @@ -1048,9 +1048,7 @@
1048 1048  )))
1049 1049  |(% style="width:160px" %)AT+RPL=0|(% style="width:263px" %)Set packet receiving response level|(% style="width:109px" %)OK
1050 1050  
1051 -{{info}}
1052 -**Downlink Command: 0x21**
1053 -{{/info}}
1157 +(% style="color:blue" %)**Downlink Command: 0x21**
1054 1054  
1055 1055  Format: Command Code (0x21) followed by 1 bytes level value.
1056 1056  
... ... @@ -1059,21 +1059,146 @@
1059 1059  * **Example 1**: Downlink Payload: **2101** ~/~/ set packet receiving response level to 1
1060 1060  * **Example 2**: Downlink Payload: **2102** ~/~/ set packet receiving response level to 2
1061 1061  
1166 +
1167 +
1168 +== 7.24 Controls NBTrans in unconfirmed uplink mode（LWS007 NBTrans:Set retransmission packets) ==
1169 +
1170 +
1171 +(% style="color:blue" %)**AT Command: AT+SETMAXNBTRANS **
1172 +
1173 +(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1174 +|=(% colspan="3" style="width: 533px;" %)AT+**SETMAXNBTRANS**
1175 +|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1176 +|(% style="width:160px" %)**AT+SETMAXNBTRANS=1，0**|(% style="width:263px" %)Value1: set the maximum NBTrans.|(% style="width:109px" %)1(((
1177 +OK
1178 +)))
1179 +|(% style="width:160px" %)**AT+SETMAXNBTRANS=？，1**|(% style="width:263px" %)value2: 0: uplink fcnt doesn't change for each NBTrans; 1: uplink fcnt increase by 1 for each NBTrans.|(% style="width:109px" %)(((
1180 +1
1181 +
1182 +OK
1183 +)))
1184 +
1185 +(% style="color:blue" %)**Downlink Command: 0x33**
1186 +
1187 +Format: Command Code (0x33) followed by 2 bytes mode value.
1188 +
1189 +If the downlink payload=330100, it means set end node to use confirm mode, while type code is 33.
1190 +
1191 +* Example 1: Downlink Payload: 330100 ~/~/ Set AT+SETMAXNBTRANS=1,0
1192 +* Example 2: Downlink Payload: 330201 ~/~/ Set AT+SETMAXNBTRANS=2,1
1193 +
1194 +
1195 +
1196 +== 7.25 Device offline rejoining （LWS007) ==
1197 +
1198 +
1199 +(% style="color:blue" %)**AT Command: AT+DDETECT**
1200 +
1201 +(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
1202 +|=(% colspan="3" style="width: 707px;" %)AT+**DDETECT**
1203 +|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
1204 +|(% style="width:160px" %)(((
1205 +AT+DDETECT=1,1440,2880
1206 +
1207 +value1
1208 +)))|(% style="width:198px" %)Enable online detect|(% style="width:349px" %)(((
1209 +1
1210 +
1211 +OK
1212 +)))
1213 +|(% style="width:160px" %)(((
1214 +AT+DDETECT=1,?,2880
1215 +
1216 +value2
1217 +)))|(% style="width:198px" %)Online detection packet sending time|(% style="width:349px" %)(((
1218 +
1219 +
1220 +OK
1221 +)))
1222 +|(% style="width:160px" %)(((
1223 +AT+DDETECT=1,1440,？
1224 +
1225 +value3
1226 +)))|(% style="width:198px" %)Process rejoin|(% style="width:349px" %)(((
1227 +
1228 +
1229 +OK
1230 +)))
1231 +
1232 +(% style="color:blue" %)**Downlink Command: 0x33**
1233 +
1234 +Format: Command Code (0x32) followed by 2 bytes mode value.
1235 +
1236 +If the downlink payload=320105A00B40, it means set end node to use confirm mode, while type code is 33.
1237 +
1238 +* Example 1: Downlink Payload: 320105A00B40 ~/~/ Set AT+DDETECT=1,1440,2880
1239 +
1240 +
1241 +
1242 +== 7.26 Request the server to send an ACK ==
1243 +
1244 +
1245 +(% style="color:blue" %)**AT Command: AT+PNACKMD**
1246 +
1247 +(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1248 +|=(% colspan="3" style="width: 533px;" %)**AT+PNACKMD**
1249 +|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1250 +|(% style="width:160px" %)**AT+PNACKMD=1**|(% style="width:263px" %)If the node uploads the ACK as confirm, it will request the server to send an ACK. If the server ack is not received, the node will upload the packets that have not received the ACK the next time it receives the ACK|(% style="width:109px" %)1(((
1251 +OK
1252 +)))
1253 +|(% style="width:160px" %)**AT+PNACKMD=0**|(% style="width:263px" %)off request the server to send an ACK|(% style="width:109px" %)(((
1254 +0
1255 +
1256 +OK
1257 +)))
1258 +
1259 +
1260 +== 7.27 Adjust network rejoining interval ==
1261 +
1262 +
1263 +(% style="color:blue" %)**AT Command: AT+RJTDC**
1264 +
1265 +(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
1266 +|=(% colspan="3" style="width: 724px;" %)AT+RJTDC
1267 +|(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
1268 +|(% style="width:165px" %)AT+RJTDC=?|(% style="width:227px" %)Show the ReJoin data transmission interval in min|(% style="width:329px" %)30000(((
1269 +OK
1270 +
1271 +the interval is 30000ms = 30s
1272 +)))
1273 +|(% style="width:165px" %)AT+RJTDC=60000|(% style="width:227px" %)Set the ReJoin data transmission interval in min|(% style="width:329px" %)OK(((
1274 +Set the ReJoin data transmission interval to 60000ms = 60 seconds
1275 +)))
1276 +
1277 +(% style="color:blue" %)**Downlink Command: 0x26**
1278 +
1279 +Format: Command Code (0x26) followed by 2 bytes mode value.
1280 +
1281 +If the downlink payload=26000A, it means set end node to use confirm mode, while type code is 26.
1282 +
1283 +* Example 1: Downlink Payload: 26000A ~/~/ Set AT+RJTDC=10
1284 +* Example 2: Downlink Payload: 260002 ~/~/ Set AT+RJTDC=2
1285 +
1286 +
1287 +
1062 1062  = 8. AT Commands Combination =
1063 1063  
1290 +
1064 1064  == 8.1 Set a fix RX2DR for downlink window ==
1065 1065  
1066 -* **AT+ADR=0 **~-~-> Disable ADR first
1067 -* **AT+RX2DR=xxxx** ~-~-> Set xxxx to your wanted DataRate
1068 1068  
1294 +* **AT+ADR=0             ** **~-~->**  Disable ADR first
1295 +* **AT+RX2DR=xxxx**  **~-~->**  Set xxxx to your wanted DataRate
1296 +
1297 +
1298 +
1069 1069  == 8.2 Use Downlink Command to set a fix uplink DR ==
1070 1070  
1071 -{{info}}
1072 -**Downlink Command: 0x22000500**
1073 -{{/info}}
1074 1074  
1075 -Same as:
1302 +(% style="color:blue" %)**Downlink Command: 0x22000500**
1076 1076  
1077 -* AT+ADR=0 [[Reference>>http://8.211.40.43:8080/xwiki/bin/view/End%20Device%20AT%20Commands%20and%20Downlink%20Command/#Adaptive_Data_Rate]]
1078 -* AT+DR=5 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Data_Rate]]
1079 -* AT+TXP=0 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Transmit_Power]]
1304 +**Same as:**
1305 +
1306 +* AT+ADR=0  [[Reference>>||anchor="H7.1AdaptiveDataRate"]]
1307 +* AT+DR=5  [[Reference>>||anchor="H7.4DataRate"]]
1308 +* AT+TXP=0  [[Reference>>||anchor="H7.14TransmitPower"]]
image-20220526162535-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +149.4 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0