Last modified by kai on 2024/09/06 10:00
<
From version < 15.2 >
edited by Xiaoling
on 2022/05/12 10:57
To version < 51.2 >
edited by Xiaoling
on 2022/07/13 14:04
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,10 +1,12 @@
1 -Contens
1 + **Table of** **Contents：**
2 2  
3 3  {{toc/}}
4 4  
5 5  
6 +
6 6  = 1. Introduction =
7 7  
9 +
8 8  Dragino LoRaWAN End Node support two types of AT Commands and Downlink Commands:
9 9  
10 10  * **Common Commands:** They should be available for each sensor, such as: change uplink interval, reset device.
... ... @@ -17,30 +17,35 @@
17 17  
18 18  = 2. How to use AT Commands or Downlink command =
19 19  
22 +
20 20  * For AT Command , See Devices User Manual for Device. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
21 21  * For LoRaWAN Downlink: The gateway transfer downlink command in HEX format. This page shows the HEX format downlink code for each command. but some servers use base64 as downlink code. Below are reference for how to use downlink command:
22 -** Use HEX format to send a downlink: [[TTN v3>>url:https://wiki.dragino.com/index.php/Notes_for_TTN#Send_Downlink_message]]
23 -** Use Base64 format to send a downlink: [[Chirpstack>>url:https://wiki.dragino.com/index.php/Notes_for_ChirpStack#Downlink]].
24 -** See use note for more serves [[Servers Note>>url:https://wiki.dragino.com/index.php/Main_Page#Use_Note_for_Server]]
25 +** Use HEX format to send a downlink: [[TTN v3>>Notes for TTN]]
26 +** Use Base64 format to send a downlink: [[Chirpstack>>Notes for ChirpStack]]
27 +** See use note for more serves [[Servers Note>>doc:Main.WebHome]](IoT LoRaWAN Server)
25 25  
29 +
30 +
31 +
26 26  = 3. Support End Node and firmware version =
27 27  
28 -(% border="1" style="background-color:#ffffcc; border:1; color:green; width:995.222px" %)
29 -|=(% colspan="3" style="width: 992px;" %)(((
34 +
35 +(% border="1" style="background-color:#ffffcc; color:green; width:966px" %)
36 +|=(% colspan="3" style="width: 963px;" %)(((
30 30  Dragino STM32 base hardware Firmware / LoRaWAN stack list
31 31  )))
32 32  |(% style="width:187px" %)(((
33 33  **Model**
34 -)))|(% style="width:349px" %)(((
41 +)))|(% style="width:330px" %)(((
35 35  **Description**
36 -)))|(% style="width:453px" %)(((
43 +)))|(% style="width:445px" %)(((
37 37  **Firmware Version <~-~-> Stack Version**
38 38  )))
39 39  |(% style="width:187px" %)(((
40 40  [[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],
41 -)))|(% style="width:349px" %)(((
48 +)))|(% style="width:330px" %)(((
42 42  Open Source Generic LoRaWAN Sensor Node
43 -)))|(% style="width:453px" %)(((
50 +)))|(% style="width:445px" %)(((
44 44  (((
45 45  LSN50 v1.6.0 <~-~-> DR-LWS-003;
46 46  )))
... ... @@ -53,9 +53,9 @@
53 53  )))
54 54  |(% style="width:187px" %)(((
55 55  [[LGT92>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/142-lgt-92.html]],
56 -)))|(% style="width:349px" %)(((
63 +)))|(% style="width:330px" %)(((
57 57  LoRaWAN GPS Tracker
58 -)))|(% style="width:453px" %)(((
65 +)))|(% style="width:445px" %)(((
59 59  (((
60 60  LGT92 v1.6.3 <~-~-> DR-LWS-003;
61 61  )))
... ... @@ -68,23 +68,23 @@
68 68  )))
69 69  |(% style="width:187px" %)(((
70 70  [[LBT1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/165-lbt1.html]],
71 -)))|(% style="width:349px" %)(((
78 +)))|(% style="width:330px" %)(((
72 72  LoRaWAN BLE Indoor Tracker
73 -)))|(% style="width:453px" %)(((
80 +)))|(% style="width:445px" %)(((
74 74  LBT1 v1.0 <~-~-> DR-LWS-005;
75 75  )))
76 76  |(% style="width:187px" %)(((
77 77  [[RS485-LN>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/154-rs485-ln.html]],
78 -)))|(% style="width:349px" %)(((
85 +)))|(% style="width:330px" %)(((
79 79  LoRaWAN RS485 Modbus Converter
80 -)))|(% style="width:453px" %)(((
87 +)))|(% style="width:445px" %)(((
81 81  RS485-LN v1.3 <~-~-> DR-LWS-005;
82 82  )))
83 83  |(% style="width:187px" %)(((
84 84  [[LHT65>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/151-lht65.html]],
85 -)))|(% style="width:349px" %)(((
92 +)))|(% style="width:330px" %)(((
86 86  LoRaWAN Temperature & Humidity Sensor
87 -)))|(% style="width:453px" %)(((
94 +)))|(% style="width:445px" %)(((
88 88  (((
89 89  LHT65 v1.7 <~-~-> DR-LWS-003;
90 90  )))
... ... @@ -96,17 +96,20 @@
96 96  )))
97 97  )))
98 98  
106 +
107 +
108 +
99 99  = 4. System Management Commands =
100 100  
111 +
101 101  == 4.1 Change Uplink Interval ==
102 102  
114 +
103 103  Feature: Change LoRaWAN End Node Transmit Interval.
104 104  
105 -(% class="box infomessage" %)
106 -(((
107 -**AT Command: AT+TDC**
108 -)))
109 109  
118 +(% style="color:blue" %)**AT Command: AT+TDC**
119 +
110 110  (% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
111 111  |=(% colspan="3" style="width: 724px;" %)AT+TDC
112 112  |(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
... ... @@ -119,13 +119,17 @@
119 119  Set transmit interval to 60000ms = 60 seconds
120 120  )))
121 121  
122 -{{info}}
123 -**Downlink Command: 0x01**
124 -{{/info}}
132 +(((
133 +
125 125  
135 +(% style="color:blue" %)**Downlink Command: 0x01**
136 +
126 126  Format: Command Code (0x01) followed by 3 bytes time value.
138 +)))
127 127  
140 +(((
128 128  If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
142 +)))
129 129  
130 130  * **Example 1**: Downlink Payload:** 0100001E** ~/~/ Set Transmit Interval (TDC) = 30 seconds
131 131  * **Example 2**: Downlink Payload:** 0100003C** ~/~/ Set Transmit Interval (TDC) = 60 seconds
... ... @@ -132,12 +132,12 @@
132 132  
133 133  == 4.2 Reboot End Node ==
134 134  
149 +
135 135  Feature: Reboot End Node to perform a new OTAA or ABP Join.
136 136  
137 -{{info}}
138 -**AT Command: ATZ**
139 -{{/info}}
140 140  
153 +(% style="color:blue" %)**AT Command: ATZ**
154 +
141 141  (% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
142 142  |=(% colspan="3" %)ATZ: Trig a reset of the MCU
143 143  |**Command Example**|**Function**|**Response**
... ... @@ -155,22 +155,26 @@
155 155  <followed by the Tx and Rx information>
156 156  )))
157 157  
158 -{{info}}
159 -**Downlink Command: 0x04**
160 -{{/info}}
172 +(% style="color:blue" %)**Downlink Command: 0x04**
161 161  
174 +(((
162 162  Format: Command Code (0x04) followed by FF.
176 +)))
163 163  
178 +(((
164 164  If the downlink payload=**04FF**, the end node will reboot.
165 165  
181 +
182 +)))
183 +
166 166  == 4.3 Reset to factory Default ==
167 167  
186 +
168 168  Feature: Reset the parameters to Factory Default, factory default value depends on the firmware settings, the OTAA and ABP keys will reserve after this command.
169 169  
170 -{{info}}
171 -**AT Command: AT+FDR**
172 -{{/info}}
173 173  
190 +(% style="color:blue" %)**AT Command: AT+FDR**
191 +
174 174  (% border="1" style="background-color:#ffffcc; color:green; width:831.222px" %)
175 175  |=(% colspan="3" style="width: 828px;" %)Reset to factory default
176 176  |(% style="width:181px" %)**Command Example**|(% style="width:181px" %)**Function**|(% style="width:465px" %)**Response**
... ... @@ -188,47 +188,61 @@
188 188  Please set the parameters or reset Device to apply change
189 189  )))
190 190  
191 -{{info}}
192 -**Downlink Command: 0x04**
193 -{{/info}}
209 +(% style="color:blue" %)**Downlink Command: 0x04**
194 194  
211 +(((
195 195  Format: Command Code (0x04) followed by FE.
213 +)))
196 196  
215 +(((
197 197  If the downlink payload=**04FE**, Reset Parameters to Factory Default, Keys Reserve.
217 +)))
198 198  
199 199  
200 200  == 4.4 Show Firmware Version ==
201 201  
222 +
202 202  Feature: Show firmware version. No downlink command yet.
203 203  
204 -{{info}}
205 -**AT Command: AT+VER**
206 -{{/info}}
207 207  
208 -(% border="1" style="background-color:#ffffcc; color:green" %)
209 -|=(% colspan="3" %)AT+VER: Image Version and Frequency Band
210 -|**Command Example**|**Function**|**Response**
211 -|AT+VER=?|Show Image version and Frequency Band|(((
226 +(% style="color:blue" %)**AT Command: AT+VER**
227 +
228 +(% border="1" style="background-color:#ffffcc; color:green; width:586px" %)
229 +|=(% colspan="3" style="width: 583px;" %)AT+VER: Image Version and Frequency Band
230 +|(% style="width:170px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:113px" %)**Response**
231 +|(% style="width:170px" %)AT+VER=?|(% style="width:300px" %)Show Image version and Frequency Band|(% style="width:113px" %)(((
212 212  1.3 EU868
213 213  
214 214  OK
215 215  )))
216 216  
217 -{{info}}
218 -**Downlink Command: 0x26 (Valid in 006 stack)**
219 -{{/info}}
237 +(% style="color:blue" %)**Downlink Command: 0x26 (Valid in 006 stack)**
220 220  
239 +(((
221 221  Downlink Format: 0x26
241 +)))
222 222  
243 +(((
223 223  Device will reply with firmware version info, device info. frequency band info. detail please check device user manual. Total 5 bytes Example: If device is of firmware version 1.1.0 Upload: xx ~-~- yy ~-~- zz ~-~- 110 total 5 bytes
245 +)))
224 224  
247 +(((
248 +
249 +
250 +
225 225  **xx: Software Type:**
252 +)))
226 226  
227 227  * 0x00 01: LGT92 Version
228 228  * 0x00 02: LBT1
229 229  * 0x00 03: LSE01/LDDS75/LDDS20/LSPH01/LLMS01/LSNPK01
230 230  
258 +(((
259 +
260 +
261 +
231 231  **yy: Frequency Band:**
263 +)))
232 232  
233 233  * 0x01: EU868
234 234  * 0x02: US915
... ... @@ -241,7 +241,12 @@
241 241  * 0x09: AS923-2
242 242  * 0xa0: AS923-3
243 243  
276 +(((
277 +
278 +
279 +
244 244  **zz: Subband**
281 +)))
245 245  
246 246  firmware version: v1.1.0 ~-~-> 110
247 247  
... ... @@ -248,12 +248,12 @@
248 248  
249 249  == 4.5 Show System Configure ==
250 250  
288 +
251 251  Feature: Show All configure. No downlink command yet.
252 252  
253 -{{info}}
254 -**AT Command: AT+CFG**
255 -{{/info}}
256 256  
292 +(% style="color:blue" %)**AT Command: AT+CFG**
293 +
257 257  (% border="1" style="background-color:#ffffcc; color:green; width:599.222px" %)
258 258  |=(% colspan="3" style="width: 596px;" %)AT+CFG: Print all configurations
259 259  |(% style="width:160px" %)**Command Example**|(% style="width:154px" %)**Function**|(% style="width:280px" %)**Response**
... ... @@ -273,14 +273,15 @@
273 273  
274 274  = 5. Keys, IDs and EUIs management =
275 275  
313 +
276 276  == 5.1 Application EUI ==
277 277  
316 +
278 278  Feature: Get or Set the Application EUI.
279 279  
280 -{{info}}
281 -**AT Command: AT+APPEUI**
282 -{{/info}}
283 283  
320 +(% style="color:blue" %)**AT Command: AT+APPEUI**
321 +
284 284  (% border="1" style="background-color:#ffffcc; color:green; width:686.222px" %)
285 285  |=(% colspan="3" style="width: 683px;" %)AT+APPEUI
286 286  |(% style="width:305px" %)**Command Example**|(% style="width:186px" %)**Function**|(% style="width:191px" %)**Response**
... ... @@ -291,12 +291,12 @@
291 291  
292 292  == 5.2 Application Key ==
293 293  
332 +
294 294  Feature: Get or Set the Application Key.
295 295  
296 -{{info}}
297 -**AT Command: AT+APPKEY**
298 -{{/info}}
299 299  
336 +(% style="color:blue" %)**AT Command: AT+APPKEY**
337 +
300 300  (% border="1" style="background-color:#ffffcc; color:green; width:976.222px" %)
301 301  |=(% colspan="3" style="width: 973px;" %)AT+APPKEY
302 302  |(% style="width:441px" %)**Command Example**|(% style="width:180px" %)**Function**|(% style="width:350px" %)**Response**
... ... @@ -307,12 +307,12 @@
307 307  
308 308  == 5.3 Application Session Key ==
309 309  
348 +
310 310  Feature: Get or Set the Application Session Key.
311 311  
312 -{{info}}
313 -**AT Command: AT+APPSKEY**
314 -{{/info}}
315 315  
352 +(% style="color:blue" %)**AT Command: AT+APPSKEY**
353 +
316 316  (% border="1" style="background-color:#ffffcc; color:green; width:1040.22px" %)
317 317  |=(% colspan="3" style="width: 1037px;" %)AT+APPSKEY
318 318  |(% style="width:451px" %)**Command Example**|(% style="width:231px" %)**Function**|(% style="width:354px" %)**Response**
... ... @@ -325,12 +325,12 @@
325 325  
326 326  == 5.4 Device Address ==
327 327  
366 +
328 328  Feature: Get or Set the Device Address.
329 329  
330 -{{info}}
331 -**AT Command: AT+DADDR**
332 -{{/info}}
333 333  
370 +(% style="color:blue" %)**AT Command: AT+DADDR**
371 +
334 334  (% border="1" style="background-color:#ffffcc; color:green; width:795.222px" %)
335 335  |=(% colspan="3" style="width: 792px;" %)AT+DADDR
336 336  |(% style="width:192px" %)**Command Example**|(% style="width:241px" %)**Function**|(% style="width:359px" %)**Response**
... ... @@ -343,12 +343,12 @@
343 343  
344 344  == 5.5 Device EUI ==
345 345  
384 +
346 346  Feature: Get or Set the Device EUI.
347 347  
348 -{{info}}
349 -**AT Command: AT+DEUI**
350 -{{/info}}
351 351  
388 +(% style="color:blue" %)**AT Command: AT+DEUI**
389 +
352 352  (% border="1" style="background-color:#ffffcc; color:green; width:1035.22px" %)
353 353  |=(% colspan="3" style="width: 1032px;" %)AT+DEUI
354 354  |(% style="width:250px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:634px" %)**Response**
... ... @@ -361,12 +361,12 @@
361 361  
362 362  == 5.6 Network ID ==
363 363  
402 +
364 364  Feature: Get or Set the Network ID.(You can enter this command change only after successful network connection)
365 365  
366 -{{info}}
367 -**AT Command: AT+NWKID**
368 -{{/info}}
369 369  
406 +(% style="color:blue" %)**AT Command: AT+NWKID**
407 +
370 370  (% border="1" style="background-color:#ffffcc; color:green; width:448.222px" %)
371 371  |=(% colspan="3" style="width: 445px;" %)AT+NWKID
372 372  |(% style="width:191px" %)**Command Example**|(% style="width:153px" %)**Function**|(% style="width:101px" %)**Response**
... ... @@ -377,12 +377,12 @@
377 377  
378 378  == 5.7 Network Session Key ==
379 379  
418 +
380 380  Feature: Get or Set the Network Session Key
381 381  
382 -{{info}}
383 -**AT Command: AT+NWKSKEY**
384 -{{/info}}
385 385  
422 +(% style="color:blue" %)**AT Command: AT+NWKSKEY**
423 +
386 386  (% border="1" style="background-color:#ffffcc; color:green; width:1017.22px" %)
387 387  |=(% colspan="3" style="width: 1014px;" %)AT+NWKSKEY
388 388  |(% style="width:455px" %)**Command Example**|(% style="width:215px" %)**Function**|(% style="width:343px" %)**Response**
... ... @@ -393,14 +393,18 @@
393 393  
394 394  = 6. Joining and sending date on LoRaWAN network =
395 395  
434 +
396 396  == 6.1 Confirm Mode ==
397 397  
437 +
438 +=== 6.1.1  AT+CFM command before DR-LWS007 software stack ===
439 +
440 +
398 398  Feature: Get or Set the confirmation mode (0-1).
399 399  
400 -{{info}}
401 -**AT Command: AT+CFM**
402 -{{/info}}
403 403  
444 +(% style="color:blue" %)**AT Command: AT+CFM**
445 +
404 404  (% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
405 405  |=(% colspan="3" style="width: 707px;" %)AT+CFM
406 406  |(% style="width:155px" %)**Command Example**|(% style="width:205px" %)**Function**|(% style="width:346px" %)**Response**
... ... @@ -410,7 +410,7 @@
410 410  |(% style="width:155px" %)AT+CFM=1|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)OK
411 411  |(% style="width:155px" %)AT+CFM=2|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)While Error in format, return AT_PARAM_ERROR
412 412  
413 -Downlink Command: 0x05
455 +(% style="color:blue" %)**Downlink Command: 0x05**
414 414  
415 415  Format: Command Code (0x05) followed by 2 bytes mode value.
416 416  
... ... @@ -419,14 +419,61 @@
419 419  * Example 1: Downlink Payload: 0501 ~/~/ Set AT+CFM=1
420 420  * Example 2: Downlink Payload: 0500 ~/~/ Set AT+CFM=0
421 421  
464 +
465 +=== 6.1.2  AT+CFM command since DR-LWS007 software stack ===
466 +
467 +
468 +(% style="color:blue" %)**AT Command: AT+CFM**
469 +
470 +(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
471 +|=(% colspan="3" style="width: 707px;" %)AT+CFM
472 +|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
473 +|(% style="width:160px" %)(((
474 +AT+CFM=1,0,0
475 +
476 +value1
477 +)))|(% style="width:198px" %)confirmed uplink|(% style="width:349px" %)(((
478 +1
479 +
480 +OK
481 +)))
482 +|(% style="width:160px" %)(((
483 +AT+CFM=0,?,0
484 +
485 +value2
486 +)))|(% style="width:198px" %)set max retry , range: 0 ~~ 7|(% style="width:349px" %)(((
487 +0~~7
488 +
489 +OK
490 +)))
491 +|(% style="width:160px" %)(((
492 +AT+CFM=0,0,1
493 +
494 +value3
495 +)))|(% style="width:198px" %)uplink fcnt increase by 1 for each retry|(% style="width:349px" %)(((
496 +1
497 +
498 +OK
499 +)))
500 +
501 +(% style="color:blue" %)**Downlink Command: 0x05**
502 +
503 +Format: Command Code (0x05) followed by 2 bytes mode value.
504 +
505 +If the downlink payload=05010101, it means set end node to use confirm mode, while type code is 05.
506 +
507 +* Example 1: Downlink Payload: 05010101 ~/~/ Set AT+CFM=1,1,1
508 +* Example 2: Downlink Payload: 05000700 ~/~/ Set AT+CFM=0,7,0
509 +
510 +
422 422  == 6.2 Confirm Status ==
423 423  
513 +
424 424  Feature: Get confirmation status of the last AT+SEND (0-1).
425 425  
426 -{{info}}
427 -**AT Command: AT+CFS**
428 -{{/info}}
429 429  
517 +(% style="color:blue" %)**AT Command: AT+CFS**
518 +
430 430  (% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
431 431  |=(% colspan="3" style="width: 531px;" %)AT+CFS
432 432  |(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:178px" %)**Response**
... ... @@ -436,12 +436,12 @@
436 436  
437 437  == 6.3 Join LoRa® Network ==
438 438  
528 +
439 439  Feature: Join network.
440 440  
441 -{{info}}
442 -**AT Command: AT+JOIN**
443 -{{/info}}
444 444  
532 +(% style="color:blue" %)**AT Command: AT+JOIN**
533 +
445 445  (% border="1" style="background-color:#ffffcc; color:green; width:647.222px" %)
446 446  |=(% colspan="3" style="width: 644px;" %)AT+JOIN
447 447  |(% style="width:163px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:334px" %)**Response**
... ... @@ -453,12 +453,12 @@
453 453  
454 454  == 6.4 LoRa® Network Join Mode ==
455 455  
545 +
456 456  Feature: Get or Set the Network Join Mode. (0: ABP, 1: OTAA).
457 457  
458 -{{info}}
459 -**AT Command: AT+NJM**
460 -{{/info}}
461 461  
549 +(% style="color:blue" %)**AT Command: AT+NJM**
550 +
462 462  (% border="1" style="background-color:#ffffcc; color:green; width:753.222px" %)
463 463  |=(% colspan="3" style="width: 750px;" %)AT+NJM
464 464  |(% style="width:162px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:361px" %)**Response**
... ... @@ -468,25 +468,24 @@
468 468  |(% style="width:162px" %)AT+NJM=0|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)OK
469 469  |(% style="width:162px" %)AT+NJM=2|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)While Error in format, return AT_PARAM_ERROR
470 470  
471 -{{info}}
472 -**Downlink Command: 0x20**
473 -{{/info}}
560 +(% style="color:blue" %)**Downlink Command: 0x20**
474 474  
475 475  Format: Command Code (0x20) followed by 1 bytes mode value.
476 476  
477 477  If the downlink payload=2000, it means set the Network Join Mode, while type code is 20.
478 478  
479 -* **Example 1: **Downlink Payload: **2000** ~/~/ Set AT+NJM=O
566 +* **Example 1: **Downlink Payload: **2000** ~/~/ Set AT+NJM=0
480 480  * **Example 2:** Downlink Payload: **2001** ~/~/ Set AT+NJM=1
481 481  
569 +
482 482  == 6.5 LoRa® Network Join Status ==
483 483  
572 +
484 484  Feature: LoRa® Network Join Status.
485 485  
486 -{{info}}
487 -**AT Command: AT+NJS**
488 -{{/info}}
489 489  
576 +(% style="color:blue" %)**AT Command: AT+NJS**
577 +
490 490  (% border="1" style="background-color:#ffffcc; color:green; width:498.222px" %)
491 491  |=(% colspan="3" style="width: 495px;" %)AT+NJS
492 492  |(% style="width:169px" %)**Command Example**|(% style="width:164px" %)**Function**|(% style="width:161px" %)**Response**
... ... @@ -496,12 +496,12 @@
496 496  
497 497  == 6.6 Print Last Received Data in Raw Format ==
498 498  
587 +
499 499  Feature: Print Last Received Data in Raw Format<port:data>.
500 500  
501 -{{info}}
502 -**AT Command: AT+RECV**
503 -{{/info}}
504 504  
591 +(% style="color:blue" %)**AT Command: AT+RECV**
592 +
505 505  (% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
506 506  |=(% colspan="3" style="width: 584px;" %)AT+RECV
507 507  |(% style="width:161px" %)**Command Example**|(% style="width:272px" %)**Function**|(% style="width:150px" %)**Response**
... ... @@ -511,12 +511,12 @@
511 511  
512 512  == 6.7 Print Last Received Data in Binary Format ==
513 513  
602 +
514 514  Feature: Print Last Received Data in Binary Format<port:data>.
515 515  
516 -{{info}}
517 -**AT Command: AT+RECVB**
518 -{{/info}}
519 519  
606 +(% style="color:blue" %)**AT Command: AT+RECVB**
607 +
520 520  (% border="1" style="background-color:#ffffcc; color:green; width:793.222px" %)
521 521  |=(% colspan="3" style="width: 790px;" %)AT+RECVB
522 522  |(% style="width:173px" %)**Command Example**|(% style="width:497px" %)**Function**|(% style="width:120px" %)**Response**
... ... @@ -526,12 +526,12 @@
526 526  
527 527  == 6.8 Send Text Data ==
528 528  
617 +
529 529  Feature: Send Text Data<port:data>.
530 530  
531 -{{info}}
532 -**AT Command: AT+SEND**
533 -{{/info}}
534 534  
621 +(% style="color:blue" %)**AT Command: AT+SEND**
622 +
535 535  (% border="1" style="background-color:#ffffcc; color:green; width:991.222px" %)
536 536  |=(% colspan="3" style="width: 988px;" %)AT+SEND
537 537  |(% style="width:201px" %)**Command Example**|(% style="width:340px" %)**Function**|(% style="width:446px" %)**Response**
... ... @@ -545,12 +545,12 @@
545 545  
546 546  == 6.9 Send Hexadecimal Data ==
547 547  
636 +
548 548  Feature: Send hexadecimal data along with the application port.
549 549  
550 -{{info}}
551 -**AT Command: AT+SENDB**
552 -{{/info}}
553 553  
640 +(% style="color:blue" %)**AT Command: AT+SENDB**
641 +
554 554  (% border="1" style="background-color:#ffffcc; color:green; width:1120.22px" %)
555 555  |=(% colspan="3" style="width: 1117px;" %)AT+SENDB
556 556  |(% style="width:257px" %)**Command Example**|(% style="width:406px" %)**Function**|(% style="width:453px" %)**Response**
... ... @@ -563,14 +563,15 @@
563 563  
564 564  = 7. LoRaWAN network management =
565 565  
654 +
566 566  == 7.1 Adaptive Data Rate ==
567 567  
657 +
568 568  Feature: Get or Set the Adaptive Data Rate setting. (0: off, 1: on).
569 569  
570 -{{info}}
571 -**AT Command: AT+ADR**
572 -{{/info}}
573 573  
661 +(% style="color:blue" %)**AT Command: AT+ADR**
662 +
574 574  (% border="1" style="background-color:#ffffcc; color:green; width:683.222px" %)
575 575  |=(% colspan="3" style="width: 680px;" %)AT+ADR
576 576  |(% style="width:162px" %)**Command Example**|(% style="width:266px" %)**Function**|(% style="width:250px" %)**Response**
... ... @@ -582,24 +582,22 @@
582 582  AT_PARAM_ERROR
583 583  )))
584 584  
585 -{{info}}
586 -**Downlink Command: 0x22**
587 -{{/info}}
674 +(% style="color:blue" %)**Downlink Command: 0x22**
588 588  
589 -
590 590  If the downlink payload=2201, it means setting the adaptive data rate to 1, while type code is 22.
591 591  
592 -* **Example 1**: Downlink Payload: **2201** ~/~/ Set AT+ADR=1.
678 +* **Example 1**: Downlink Payload: **2201**  ~/~/ Set AT+ADR=1.
593 593  * **Example 2**: Downlink Payload: **2200FFFF** ~/~/ Set AT+ADR=0.
594 594  
681 +
595 595  == 7.2 LoRa® Class ==
596 596  
684 +
597 597  Feature: Get or Set the Device Class(Currently only support class A, class C).
598 598  
599 -{{info}}
600 -**AT Command:AT+CLASS**
601 -{{/info}}
602 602  
688 +(% style="color:blue" %)**AT Command:AT+CLASS**
689 +
603 603  (% border="1" style="background-color:#ffffcc; color:green; width:507.222px" %)
604 604  |=(% colspan="3" style="width: 504px;" %)AT+CLASS
605 605  |(% style="width:163px" %)**Command Example**|(% style="width:166px" %)**Function**|(% style="width:175px" %)**Response**
... ... @@ -612,12 +612,12 @@
612 612  
613 613  == 7.3 Duty Cycle Setting ==
614 614  
702 +
615 615  Feature: Get or Set the ETSI Duty Cycle setting - 0=disable, 1=enable - Only for testing.
616 616  
617 -{{info}}
618 -**AT Command:AT+DCS**
619 -{{/info}}
620 620  
706 +(% style="color:blue" %)**AT Command:AT+DCS**
707 +
621 621  (% border="1" style="background-color:#ffffcc; color:green; width:515.222px" %)
622 622  |=(% colspan="3" style="width: 512px;" %)AT+DCS
623 623  |(% style="width:165px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:107px" %)**Response**
... ... @@ -630,12 +630,12 @@
630 630  
631 631  == 7.4 Data Rate ==
632 632  
720 +
633 633  Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) . Note: while set Data Rate, please use set Adptive Data Rate, ADR=0 first. otherwise device will response to server's ADR command and change the DR to the setting from server
634 634  
635 -{{info}}
636 -**AT Command: AT+DR**
637 -{{/info}}
638 638  
724 +(% style="color:blue" %)**AT Command: AT+DR**
725 +
639 639  (% border="1" style="background-color:#ffffcc; color:green; width:466.222px" %)
640 640  |=(% colspan="3" style="width: 463px;" %)AT+DR
641 641  |(% style="width:156px" %)**Command Example**|(% style="width:167px" %)**Function**|(% style="width:140px" %)**Response**
... ... @@ -646,24 +646,22 @@
646 646  
647 647  )))
648 648  
649 -{{info}}
650 -**Downlink Command: 0x2200aaFF**
651 -{{/info}}
736 +(% style="color:blue" %)**Downlink Command: 0x2200aaFF**
652 652  
653 -
654 654  If the downlink payload=220001FF, it means setting the data rate to 1, while type code is 22 00 aa FF.
655 655  
656 656  * **Example 1**: Downlink Payload: **220001FF** ~/~/ Set AT+DR=1.
657 657  * **Example 2**: Downlink Payload: **220000FF** ~/~/ Set AT+DR=0.
658 658  
743 +
659 659  == 7.5 Frame Counter Downlink ==
660 660  
746 +
661 661  Feature: Get or Set the Frame Counter Downlink.
662 662  
663 -{{info}}
664 -**AT Command:AT+FCD**
665 -{{/info}}
666 666  
750 +(% style="color:blue" %)**AT Command:AT+FCD**
751 +
667 667  (% border="1" style="background-color:#ffffcc; color:green; width:693.222px" %)
668 668  |=(% colspan="3" style="width: 690px;" %)AT+FCD
669 669  |(% style="width:162px" %)**Command Example**|(% style="width:258px" %)**Function**|(% style="width:269px" %)**Response**
... ... @@ -672,8 +672,6 @@
672 672  )))
673 673  |(% style="width:162px" %)AT+FCD=10|(% style="width:258px" %)Set the Frame Counter Downlink.|(% style="width:269px" %)(System will write new value to FCD)(((
674 674  OK
675 -
676 -
677 677  )))
678 678  
679 679  == 7.6 Frame Counter Uplink ==
... ... @@ -680,10 +680,9 @@
680 680  
681 681  Feature: Get or Set the Frame Counter Uplink.
682 682  
683 -{{info}}
684 -**AT Command:AT+FCU**
685 -{{/info}}
686 686  
767 +(% style="color:blue" %)**AT Command:AT+FCU**
768 +
687 687  (% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
688 688  |=(% colspan="3" style="width: 531px;" %)AT+FCU
689 689  |(% style="width:177px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:113px" %)**Response**
... ... @@ -696,12 +696,12 @@
696 696  
697 697  == 7.7 Join Accept Delay1 ==
698 698  
781 +
699 699  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 1 in ms.
700 700  
701 -{{info}}
702 -**AT Command:AT+JN1DL**
703 -{{/info}}
704 704  
785 +(% style="color:blue" %)**AT Command:AT+JN1DL**
786 +
705 705  (% border="1" style="background-color:#ffffcc; color:green; width:537.222px" %)
706 706  |=(% colspan="3" style="width: 534px;" %)AT+JN1DL
707 707  |(% style="width:164px" %)**Command Example**|(% style="width:229px" %)**Function**|(% style="width:140px" %)**Response**
... ... @@ -716,10 +716,9 @@
716 716  
717 717  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 2 in ms.
718 718  
719 -{{info}}
720 -**AT Command:AT+JN2DL**
721 -{{/info}}
722 722  
802 +(% style="color:blue" %)**AT Command:AT+JN2DL**
803 +
723 723  (% border="1" style="background-color:#ffffcc; color:green; width:538.222px" %)
724 724  |=(% colspan="3" style="width: 535px;" %)AT+JN2DL
725 725  |(% style="width:160px" %)**Command Example**|(% style="width:228px" %)**Function**|(% style="width:146px" %)**Response**
... ... @@ -732,12 +732,14 @@
732 732  
733 733  == 7.9 Public Network Mode ==
734 734  
735 -Feature: Get or Set the public network mode. (0: off, 1: on)
736 736  
737 -{{info}}
738 -**AT Command:AT+PNM**
739 -{{/info}}
817 +Feature: Get or Set the public network mode. (0: off, 1: on). A Public LoRaWAN network use 0x34 as syncword. Default Settings; PNM=1
740 740  
819 +(% style="color:red" %)Notice: If user build their own LoRaWAN server but still use syncword=0x34, this is still considered a public LoRaWAN network
820 +
821 +
822 +(% style="color:blue" %)**AT Command:AT+PNM**
823 +
741 741  (% border="1" style="background-color:#ffffcc; color:green; width:667.222px" %)
742 742  |=(% colspan="3" style="width: 664px;" %)AT+PNM
743 743  |(% style="width:166px" %)**Command Example**|(% style="width:225px" %)**Function**|(% style="width:272px" %)**Response**
... ... @@ -744,20 +744,25 @@
744 744  |(% style="width:166px" %)AT+PNM=?|(% style="width:225px" %)Get the public network mode.|(% style="width:272px" %)1(((
745 745  OK
746 746  )))
747 -|(% style="width:166px" %)AT+PNM=1|(% style="width:225px" %)Set the public network mode.|(% style="width:272px" %)(System will write new value to PNM)(((
830 +|(% style="width:166px" %)AT+PNM=1|(% style="width:225px" %)(((
831 +Set the public network mode.
832 +
833 +Set syncword=0x34
834 +)))|(% style="width:272px" %)(System will write new value to PNM)(((
748 748  OK
749 749  
750 750  
751 751  )))
839 +|(% style="width:166px" %)AT+PNM=0|(% style="width:225px" %)Set to use private network autoset syncword=0x12|(% style="width:272px" %)
752 752  
753 753  == 7.10 Receive Delay1 ==
754 754  
843 +
755 755  Feature: Get or Set the delay between the end of the Tx and the Rx Window 1 in ms
756 756  
757 -{{info}}
758 -**AT Command:AT+RX1DL**
759 -{{/info}}
760 760  
847 +(% style="color:blue" %)**AT Command:AT+RX1DL**
848 +
761 761  (% border="1" style="background-color:#ffffcc; color:green; width:408.222px" %)
762 762  |=(% colspan="3" style="width: 405px;" %)AT+RX1DL
763 763  |(% style="width:155px" %)**Command Example**|(% style="width:128px" %)**Function**|(% style="width:122px" %)**Response**
... ... @@ -768,14 +768,15 @@
768 768  
769 769  )))
770 770  
771 -== 7.11Receive Delay2 ==
772 772  
860 +== 7.11 Receive Delay2 ==
861 +
862 +
773 773  Feature: Get or Set the delay between the end of the Tx and the Rx Window 2 in ms
774 774  
775 -{{info}}
776 -**AT Command:AT+RX2DL**
777 -{{/info}}
778 778  
866 +(% style="color:blue" %)**AT Command:AT+RX2DL**
867 +
779 779  (% border="1" style="background-color:#ffffcc; color:green; width:481.222px" %)
780 780  |=(% colspan="3" style="width: 478px;" %)AT+RX2DL
781 781  |(% style="width:175px" %)**Command Example**|(% style="width:152px" %)**Function**|(% style="width:150px" %)**Response**
... ... @@ -786,14 +786,15 @@
786 786  
787 787  )))
788 788  
878 +
789 789  == 7.12 Rx2 Window Data Rate ==
790 790  
881 +
791 791  Feature: Get or Set the Rx2 window data rate (0-7 corresponding to DR_X)
792 792  
793 -{{info}}
794 -**AT Command:AT+RX2DR**
795 -{{/info}}
796 796  
885 +(% style="color:blue" %)**AT Command:AT+RX2DR**
886 +
797 797  (% border="1" style="background-color:#ffffcc; color:green; width:525.222px" %)
798 798  |=(% colspan="3" style="width: 522px;" %)AT+RX2DR
799 799  |(% style="width:160px" %)**Command Example**|(% style="width:232px" %)**Function**|(% style="width:130px" %)**Response**
... ... @@ -804,14 +804,15 @@
804 804  
805 805  )))
806 806  
897 +
807 807  == 7.13 Rx2 Window Frequency ==
808 808  
900 +
809 809  Feature: Get or Set the Rx2 window frequency
810 810  
811 -{{info}}
812 -**AT Command:AT+RX2FQ**
813 -{{/info}}
814 814  
904 +(% style="color:blue" %)**AT Command:AT+RX2FQ**
905 +
815 815  (% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
816 816  |=(% colspan="3" style="width: 584px;" %)AT+RX2FQ
817 817  |(% style="width:183px" %)**Command Example**|(% style="width:240px" %)**Function**|(% style="width:160px" %)**Response**
... ... @@ -822,14 +822,15 @@
822 822  
823 823  )))
824 824  
916 +
825 825  == 7.14 Transmit Power ==
826 826  
919 +
827 827  Feature: Get or Set the Transmit Power(0-5, MAX:0, MIN:5, according to LoRaWAN Spec, or 40=10dB, 41 = 11dB, …, 50 = 20dB which is out of LoRaWAN spec. )
828 828  
829 -{{info}}
830 -**AT Command:AT+TXP**
831 -{{/info}}
832 832  
923 +(% style="color:blue" %)**AT Command:AT+TXP**
924 +
833 833  (% border="1" style="background-color:#ffffcc; color:green; width:465.222px" %)
834 834  |=(% colspan="3" style="width: 462px;" %)AT+TXP
835 835  |(% style="width:161px" %)**Command Example**|(% style="width:189px" %)**Function**|(% style="width:112px" %)**Response**
... ... @@ -847,14 +847,16 @@
847 847  * **Example 1**: Downlink Payload: **22000102** ~/~/ Set AT+TXP=2.
848 848  * **Example 2**: Downlink Payload: **220000FF** ~/~/ Set AT+TXP=0.
849 849  
942 +
943 +
850 850  == 7.15 RSSI of the Last Received Packet ==
851 851  
946 +
852 852  Feature: Get or Set the Rx2 window frequency
853 853  
854 -{{info}}
855 -**AT Command:AT+RSSI**
856 -{{/info}}
857 857  
950 +(% style="color:blue" %)**AT Command:AT+RSSI**
951 +
858 858  (% border="1" style="background-color:#ffffcc; color:green; width:557.222px" %)
859 859  |=(% colspan="3" style="width: 554px;" %)AT+RSSI
860 860  |(% style="width:164px" %)**Command Example**|(% style="width:289px" %)**Function**|(% style="width:100px" %)**Response**
... ... @@ -862,14 +862,15 @@
862 862  OK
863 863  )))
864 864  
959 +
865 865  == 7.16 SNR of the Last Received Packet ==
866 866  
962 +
867 867  Feature: Get the SNR of the last received packet
868 868  
869 -{{info}}
870 -**AT Command:AT+SNR**
871 -{{/info}}
872 872  
966 +(% style="color:blue" %)**AT Command:AT+SNR**
967 +
873 873  (% border="1" style="background-color:#ffffcc; color:green; width:571.222px" %)
874 874  |=(% colspan="3" style="width: 568px;" %)AT+SNR
875 875  |(% style="width:164px" %)**Command Example**|(% style="width:290px" %)**Function**|(% style="width:113px" %)**Response**
... ... @@ -877,14 +877,15 @@
877 877  OK
878 878  )))
879 879  
975 +
880 880  == 7.17 Application Port ==
881 881  
978 +
882 882  Feature: Get or set the application port.
883 883  
884 -{{info}}
885 -**AT Command: AT+PORT**
886 -{{/info}}
887 887  
982 +(% style="color:blue" %)**AT Command: AT+PORT**
983 +
888 888  (% border="1" style="background-color:#ffffcc; color:green; width:500.222px" %)
889 889  |=(% colspan="3" style="width: 497px;" %)AT+PORT
890 890  |(% style="width:157px" %)**Command Example**|(% style="width:204px" %)**Function**|(% style="width:135px" %)**Response**
... ... @@ -893,9 +893,7 @@
893 893  )))
894 894  |(% style="width:157px" %)AT+PORT=21|(% style="width:204px" %)Set the application port|(% style="width:135px" %)OK
895 895  
896 -{{info}}
897 -**Downlink Command: 0x23**
898 -{{/info}}
992 +(% style="color:blue" %)**Downlink Command: 0x23**
899 899  
900 900  Format: Command Code (0x23) followed by 1 bytes port value.
901 901  
... ... @@ -904,14 +904,16 @@
904 904  * **Example 1**: Downlink Payload: **2301** ~/~/ set the application port to 1
905 905  * **Example 2**: Downlink Payload:** 2305** ~/~/ set the application port to 5
906 906  
1001 +
1002 +
907 907  == 7.18 Single Channel Mode ==
908 908  
1005 +
909 909  Feature:Get or Set Frequency (Unit: Hz) for Single Channel Mode.
910 910  
911 -{{info}}
912 -**AT Command: AT+CHS**
913 -{{/info}}
914 914  
1009 +(% style="color:blue" %)**AT Command: AT+CHS**
1010 +
915 915  (% border="1" style="background-color:#ffffcc; color:green; width:603.222px" %)
916 916  |=(% colspan="3" style="width: 600px;" %)AT+CHS
917 917  |(% style="width:182px" %)**Command Example**|(% style="width:295px" %)**Function**|(% style="width:122px" %)**Response**
... ... @@ -920,14 +920,14 @@
920 920  )))
921 921  |(% style="width:182px" %)AT+CHS=868100000|(% style="width:295px" %)Set Frequency for Single Channel Mode|(% style="width:122px" %)OK
922 922  
1019 +
923 923  == 7.19 Eight Channel Mode ==
924 924  
925 925  Feature: Get or Set eight channels mode,Only for US915,AU915,CN470.
926 926  
927 -{{info}}
928 -**AT Command: AT+CHE**
929 -{{/info}}
930 930  
1025 +(% style="color:blue" %)**AT Command: AT+CHE**
1026 +
931 931  (% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
932 932  |=(% colspan="3" style="width: 707px;" %)AT+CHE
933 933  |(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
... ... @@ -938,9 +938,7 @@
938 938  )))
939 939  |(% style="width:160px" %)AT+CHE=1|(% style="width:198px" %)Set eight channels mode|(% style="width:349px" %)OK
940 940  
941 -{{info}}
942 -**Downlink Command: 0x24**
943 -{{/info}}
1037 +(% style="color:blue" %)**Downlink Command: 0x24**
944 944  
945 945  Format: Command Code (0x24) followed by 1 bytes channel value.
946 946  
... ... @@ -949,14 +949,16 @@
949 949  * **Example 1**: Downlink Payload: 2401 ~/~/ set channel mode to 1
950 950  * **Example 2**: Downlink Payload: 2405 ~/~/ set channel mode to 5
951 951  
1046 +
1047 +
952 952  == 7.20 Get or Set RXwindows1 timeout ==
953 953  
954 -Feature:Get or Set the number of symbols to detect and timeout from RXwindow1(0 to 255).
955 955  
956 -{{info}}
957 -**AT Command: AT+RX1WTO**
958 -{{/info}}
1051 +Feature: Get or Set the number of symbols to detect and timeout from RXwindow1(0 to 255).
959 959  
1053 +
1054 +(% style="color:blue" %)**AT Command: AT+RX1WTO**
1055 +
960 960  (% border="1" style="background-color:#ffffcc; color:green; width:460.222px" %)
961 961  |=(% colspan="3" style="width: 457px;" %)AT+ RX1WTO
962 962  |(% style="width:163px" %)**Command Example**|(% style="width:201px" %)**Function**|(% style="width:93px" %)**Response**
... ... @@ -965,20 +965,31 @@
965 965  )))
966 966  |(% style="width:163px" %)AT+RX1WTO=60|(% style="width:201px" %)Set RXwindows1 timeout|(% style="width:93px" %)OK
967 967  
968 -AT+RX1TWO is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
1064 +(((
1065 +
969 969  
970 -[[image:image-20220511120050-1.png]]
1067 +**AT+RX1TWO** is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
971 971  
1069 +
1070 +)))
1071 +
1072 +[[image:image-20220526162535-1.png]]
1073 +
1074 +
1075 +(((
972 972  Increasing thisvalue is equal to extending the time that the receiving window is opened, butthe corresponding power consumption will also increase. Properly increasingthis value can increase the success rate of the downlink.
973 973  
1078 +
1079 +)))
1080 +
974 974  == 7.21 Get or Set RXwindows2 timeout ==
975 975  
976 -Feature:Get or Set the number of symbols to detect and timeout from RXwindow2(0 to 255).
977 977  
978 -{{info}}
979 -**AT Command: AT+RX2WTO**
980 -{{/info}}
1084 +Feature: Get or Set the number of symbols to detect and timeout from RXwindow2(0 to 255).
981 981  
1086 +
1087 +(% style="color:blue" %)**AT Command: AT+RX2WTO**
1088 +
982 982  (% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
983 983  |=(% colspan="3" style="width: 494px;" %)AT+ RX2WTO
984 984  |(% style="width:190px" %)**Command Example**|(% style="width:199px" %)**Function**|(% style="width:104px" %)**Response**
... ... @@ -987,14 +987,15 @@
987 987  )))
988 988  |(% style="width:190px" %)AT+RX2WTO=20|(% style="width:199px" %)Set RXwindows2 timeout|(% style="width:104px" %)OK
989 989  
1097 +
990 990  == 7.22 Setting up uplinkdwelltime (as923, au915) ==
991 991  
1100 +
992 992  Feature: Get or Set uplinkdwelltime
993 993  
994 -{{info}}
995 -**AT Command: AT+DWELLT**
996 -{{/info}}
997 997  
1104 +(% style="color:blue" %)**AT Command: AT+DWELLT**
1105 +
998 998  (% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
999 999  |=(% colspan="3" style="width: 494px;" %)AT+DWELLT
1000 1000  |(% style="width:183px" %)**Command Example**|(% style="width:179px" %)**Function**|(% style="width:131px" %)**Response**
... ... @@ -1003,9 +1003,7 @@
1003 1003  )))
1004 1004  |(% style="width:183px" %)AT+DWELLT=0|(% style="width:179px" %)Set uplinkdwelltime|(% style="width:131px" %)OK
1005 1005  
1006 -{{info}}
1007 -**Downlink Command: 0x25**
1008 -{{/info}}
1114 +(% style="color:blue" %)**Downlink Command: 0x25**
1009 1009  
1010 1010  Format: Command Code (0x25) followed by 1 bytes state value.
1011 1011  
... ... @@ -1014,10 +1014,14 @@
1014 1014  * **Example 1**: Downlink Payload: **2501** ~/~/ set uplinkdwelltime to 1
1015 1015  * **Example 2**: Downlink Payload: **2500** ~/~/ set uplinkdwelltime to 0
1016 1016  
1123 +
1124 +
1017 1017  == 7.23 Set Packet Receiving Response Level ==
1018 1018  
1127 +
1019 1019  Feature: Get or Set packet receiving response level. This feature is used to set compatible with different LoRaWAN servers. If RPL doesn;t match , user will see strange message in the server portal.
1020 1020  
1130 +
1021 1021  RPL value:
1022 1022  
1023 1023  * **AT+RPL=0:** Device won't immediately reply any downlink commands from platform.
... ... @@ -1026,6 +1026,7 @@
1026 1026  * **AT+RPL=3:** Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command.
1027 1027  * **AT+RPL=4: **Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands.
1028 1028  
1139 +
1029 1029  Case Analyes:
1030 1030  
1031 1031  * For Class A devices, AT+RPL=0 is ok. that is defaut settings in software.
... ... @@ -1032,10 +1032,9 @@
1032 1032  * For Class C devices used in ChirpStack, need to set AT+RPL=4 because Chirpstack require immedietely reply message to MAC Command.
1033 1033  * For Class C devices used in TTI, need to set AT+RPL=4 because TTI require immediately reply message to Confirmed Data Down & MAC Command.
1034 1034  
1035 -{{info}}
1036 -**AT Command: AT+RPL**
1037 -{{/info}}
1038 1038  
1147 +(% style="color:blue" %)**AT Command: AT+RPL**
1148 +
1039 1039  (% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1040 1040  |=(% colspan="3" style="width: 533px;" %)AT+RPL
1041 1041  |(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
... ... @@ -1044,9 +1044,7 @@
1044 1044  )))
1045 1045  |(% style="width:160px" %)AT+RPL=0|(% style="width:263px" %)Set packet receiving response level|(% style="width:109px" %)OK
1046 1046  
1047 -{{info}}
1048 -**Downlink Command: 0x21**
1049 -{{/info}}
1157 +(% style="color:blue" %)**Downlink Command: 0x21**
1050 1050  
1051 1051  Format: Command Code (0x21) followed by 1 bytes level value.
1052 1052  
... ... @@ -1055,21 +1055,146 @@
1055 1055  * **Example 1**: Downlink Payload: **2101** ~/~/ set packet receiving response level to 1
1056 1056  * **Example 2**: Downlink Payload: **2102** ~/~/ set packet receiving response level to 2
1057 1057  
1166 +
1167 +
1168 +== 7.24 Controls NBTrans in unconfirmed uplink mode（LWS007 NBTrans:Set retransmission packets) ==
1169 +
1170 +
1171 +(% style="color:blue" %)**AT Command: AT+SETMAXNBTRANS **
1172 +
1173 +(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1174 +|=(% colspan="3" style="width: 533px;" %)AT+**SETMAXNBTRANS**
1175 +|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1176 +|(% style="width:160px" %)**AT+SETMAXNBTRANS=1，0**|(% style="width:263px" %)Value1: set the maximum NBTrans.|(% style="width:109px" %)1(((
1177 +OK
1178 +)))
1179 +|(% style="width:160px" %)**AT+SETMAXNBTRANS=？，1**|(% style="width:263px" %)value2: 0: uplink fcnt doesn't change for each NBTrans; 1: uplink fcnt increase by 1 for each NBTrans.|(% style="width:109px" %)(((
1180 +1
1181 +
1182 +OK
1183 +)))
1184 +
1185 +(% style="color:blue" %)**Downlink Command: 0x33**
1186 +
1187 +Format: Command Code (0x33) followed by 2 bytes mode value.
1188 +
1189 +If the downlink payload=330100, it means set end node to use confirm mode, while type code is 33.
1190 +
1191 +* Example 1: Downlink Payload: 330100 ~/~/ Set AT+SETMAXNBTRANS=1,0
1192 +* Example 2: Downlink Payload: 330201 ~/~/ Set AT+SETMAXNBTRANS=2,1
1193 +
1194 +
1195 +
1196 +== 7.25 Device offline rejoining （LWS007) ==
1197 +
1198 +
1199 +(% style="color:blue" %)**AT Command: AT+DDETECT**
1200 +
1201 +(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
1202 +|=(% colspan="3" style="width: 707px;" %)AT+**DDETECT**
1203 +|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
1204 +|(% style="width:160px" %)(((
1205 +AT+DDETECT=1,1440,2880
1206 +
1207 +value1
1208 +)))|(% style="width:198px" %)Enable online detect|(% style="width:349px" %)(((
1209 +1
1210 +
1211 +OK
1212 +)))
1213 +|(% style="width:160px" %)(((
1214 +AT+DDETECT=1,?,2880
1215 +
1216 +value2
1217 +)))|(% style="width:198px" %)Online detection packet sending time|(% style="width:349px" %)(((
1218 +
1219 +
1220 +OK
1221 +)))
1222 +|(% style="width:160px" %)(((
1223 +AT+DDETECT=1,1440,？
1224 +
1225 +value3
1226 +)))|(% style="width:198px" %)Process rejoin|(% style="width:349px" %)(((
1227 +
1228 +
1229 +OK
1230 +)))
1231 +
1232 +(% style="color:blue" %)**Downlink Command: 0x33**
1233 +
1234 +Format: Command Code (0x32) followed by 2 bytes mode value.
1235 +
1236 +If the downlink payload=320105A00B40, it means set end node to use confirm mode, while type code is 33.
1237 +
1238 +* Example 1: Downlink Payload: 320105A00B40 ~/~/ Set AT+DDETECT=1,1440,2880
1239 +
1240 +
1241 +
1242 +== 7.26 Request the server to send an ACK ==
1243 +
1244 +
1245 +(% style="color:blue" %)**AT Command: AT+PNACKMD**
1246 +
1247 +(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1248 +|=(% colspan="3" style="width: 533px;" %)**AT+PNACKMD**
1249 +|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1250 +|(% style="width:160px" %)**AT+PNACKMD=1**|(% style="width:263px" %)If the node uploads the ACK as confirm, it will request the server to send an ACK. If the server ack is not received, the node will upload the packets that have not received the ACK the next time it receives the ACK|(% style="width:109px" %)1(((
1251 +OK
1252 +)))
1253 +|(% style="width:160px" %)**AT+PNACKMD=0**|(% style="width:263px" %)off request the server to send an ACK|(% style="width:109px" %)(((
1254 +0
1255 +
1256 +OK
1257 +)))
1258 +
1259 +
1260 +== 7.27 Adjust network rejoining interval ==
1261 +
1262 +
1263 +(% style="color:blue" %)**AT Command: AT+RJTDC**
1264 +
1265 +(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
1266 +|=(% colspan="3" style="width: 724px;" %)AT+RJTDC
1267 +|(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
1268 +|(% style="width:165px" %)AT+RJTDC=?|(% style="width:227px" %)Show the ReJoin data transmission interval in min|(% style="width:329px" %)30000(((
1269 +OK
1270 +
1271 +the interval is 30000ms = 30s
1272 +)))
1273 +|(% style="width:165px" %)AT+RJTDC=60000|(% style="width:227px" %)Set the ReJoin data transmission interval in min|(% style="width:329px" %)OK(((
1274 +Set the ReJoin data transmission interval to 60000ms = 60 seconds
1275 +)))
1276 +
1277 +(% style="color:blue" %)**Downlink Command: 0x26**
1278 +
1279 +Format: Command Code (0x26) followed by 2 bytes mode value.
1280 +
1281 +If the downlink payload=26000A, it means set end node to use confirm mode, while type code is 26.
1282 +
1283 +* Example 1: Downlink Payload: 26000A ~/~/ Set AT+RJTDC=10
1284 +* Example 2: Downlink Payload: 260002 ~/~/ Set AT+RJTDC=2
1285 +
1286 +
1287 +
1058 1058  = 8. AT Commands Combination =
1059 1059  
1290 +
1060 1060  == 8.1 Set a fix RX2DR for downlink window ==
1061 1061  
1062 -* **AT+ADR=0 **~-~-> Disable ADR first
1063 -* **AT+RX2DR=xxxx** ~-~-> Set xxxx to your wanted DataRate
1064 1064  
1294 +* **AT+ADR=0             ** **~-~->**  Disable ADR first
1295 +* **AT+RX2DR=xxxx**  **~-~->**  Set xxxx to your wanted DataRate
1296 +
1297 +
1298 +
1065 1065  == 8.2 Use Downlink Command to set a fix uplink DR ==
1066 1066  
1067 -{{info}}
1068 -**Downlink Command: 0x22000500**
1069 -{{/info}}
1070 1070  
1071 -Same as:
1302 +(% style="color:blue" %)**Downlink Command: 0x22000500**
1072 1072  
1073 -* AT+ADR=0 [[Reference>>http://8.211.40.43:8080/xwiki/bin/view/End%20Device%20AT%20Commands%20and%20Downlink%20Command/#Adaptive_Data_Rate]]
1074 -* AT+DR=5 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Data_Rate]]
1075 -* AT+TXP=0 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Transmit_Power]]
1304 +**Same as:**
1305 +
1306 +* AT+ADR=0  [[Reference>>||anchor="H7.1AdaptiveDataRate"]]
1307 +* AT+DR=5  [[Reference>>||anchor="H7.4DataRate"]]
1308 +* AT+TXP=0  [[Reference>>||anchor="H7.14TransmitPower"]]
image-20220526162535-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +149.4 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0