Last modified by kai on 2024/09/06 10:00
<
From version < 15.1 >
edited by Xiaoling
on 2022/05/11 12:01
To version < 50.7 >
edited by Xiaoling
on 2022/07/13 13:32
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,53 +1,118 @@
1 -Contens
1 + **Table of** **Contents：**
2 2  
3 3  {{toc/}}
4 4  
5 5  
6 +
6 6  = 1. Introduction =
7 7  
9 +
8 8  Dragino LoRaWAN End Node support two types of AT Commands and Downlink Commands:
9 9  
10 10  * **Common Commands:** They should be available for each sensor, such as: change uplink interval, reset device.
11 11  * **Sensor Related Commands:** Only for special sensor, such as control relay, poll RS485 device.
12 12  
15 +(((
13 13  **This page shows the common commands since Dragino LoRaWAN stack DR-LWS-005. Make sure the end node support stack higher than DR-LWS-005 before checking this page.**
14 14  
18 +)))
15 15  
16 16  = 2. How to use AT Commands or Downlink command =
17 17  
22 +
18 18  * For AT Command , See Devices User Manual for Device. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
19 19  * For LoRaWAN Downlink: The gateway transfer downlink command in HEX format. This page shows the HEX format downlink code for each command. but some servers use base64 as downlink code. Below are reference for how to use downlink command:
20 -** Use HEX format to send a downlink: [[TTN v3>>url:https://wiki.dragino.com/index.php/Notes_for_TTN#Send_Downlink_message]]
21 -** Use Base64 format to send a downlink: [[Chirpstack>>url:https://wiki.dragino.com/index.php/Notes_for_ChirpStack#Downlink]].
22 -** See use note for more serves [[Servers Note>>url:https://wiki.dragino.com/index.php/Main_Page#Use_Note_for_Server]]
25 +** Use HEX format to send a downlink: [[TTN v3>>Notes for TTN]]
26 +** Use Base64 format to send a downlink: [[Chirpstack>>Notes for ChirpStack]]
27 +** See use note for more serves [[Servers Note>>doc:Main.WebHome]](IoT LoRaWAN Server)
23 23  
29 +
30 +
24 24  = 3. Support End Node and firmware version =
25 25  
26 -(% border="1" style="background-color:#ffffcc; border:1; color:green; width:995.222px" %)
27 -|=(% colspan="3" style="width: 992px;" %)Dragino STM32 base hardware Firmware / LoRaWAN stack list
28 -|(% style="width:187px" %)**Model**|(% style="width:349px" %)**Description**|(% style="width:453px" %)**Firmware Version <~-~-> Stack Version**
29 -|(% style="width:187px" %)[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],|(% style="width:349px" %)Open Source Generic LoRaWAN Sensor Node|(% style="width:453px" %)LSN50 v1.6.0 <~-~-> DR-LWS-003;(((
33 +
34 +(% border="1" style="background-color:#ffffcc; color:green; width:966px" %)
35 +|=(% colspan="3" style="width: 963px;" %)(((
36 +Dragino STM32 base hardware Firmware / LoRaWAN stack list
37 +)))
38 +|(% style="width:187px" %)(((
39 +**Model**
40 +)))|(% style="width:330px" %)(((
41 +**Description**
42 +)))|(% style="width:445px" %)(((
43 +**Firmware Version <~-~-> Stack Version**
44 +)))
45 +|(% style="width:187px" %)(((
46 +[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],
47 +)))|(% style="width:330px" %)(((
48 +Open Source Generic LoRaWAN Sensor Node
49 +)))|(% style="width:445px" %)(((
50 +(((
51 +LSN50 v1.6.0 <~-~-> DR-LWS-003;
52 +)))
53 +
54 +(((
55 +(((
30 30  LSN50 v1.7.0 <~-~-> DR-LWS-005; ~-~-> Support since this version
31 31  )))
32 -|(% style="width:187px" %)[[LGT92>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/142-lgt-92.html]],|(% style="width:349px" %)LoRaWAN GPS Tracker|(% style="width:453px" %)LGT92 v1.6.3 <~-~-> DR-LWS-003;(((
58 +)))
59 +)))
60 +|(% style="width:187px" %)(((
61 +[[LGT92>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/142-lgt-92.html]],
62 +)))|(% style="width:330px" %)(((
63 +LoRaWAN GPS Tracker
64 +)))|(% style="width:445px" %)(((
65 +(((
66 +LGT92 v1.6.3 <~-~-> DR-LWS-003;
67 +)))
68 +
69 +(((
70 +(((
33 33  LGT92 v1.6.4 <~-~-> DR-LWS-005;~-~-> Support since this version
34 34  )))
35 -|(% style="width:187px" %)[[LBT1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/165-lbt1.html]],|(% style="width:349px" %)LoRaWAN BLE Indoor Tracker|(% style="width:453px" %)LBT1 v1.0 <~-~-> DR-LWS-005;
36 -|(% style="width:187px" %)[[RS485-LN>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/154-rs485-ln.html]],|(% style="width:349px" %)LoRaWAN RS485 Modbus Converter|(% style="width:453px" %)RS485-LN v1.3 <~-~-> DR-LWS-005;
37 -|(% style="width:187px" %)[[LHT65>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/151-lht65.html]],|(% style="width:349px" %)LoRaWAN Temperature & Humidity Sensor|(% style="width:453px" %)LHT65 v1.7 <~-~-> DR-LWS-003;(((
73 +)))
74 +)))
75 +|(% style="width:187px" %)(((
76 +[[LBT1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/165-lbt1.html]],
77 +)))|(% style="width:330px" %)(((
78 +LoRaWAN BLE Indoor Tracker
79 +)))|(% style="width:445px" %)(((
80 +LBT1 v1.0 <~-~-> DR-LWS-005;
81 +)))
82 +|(% style="width:187px" %)(((
83 +[[RS485-LN>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/154-rs485-ln.html]],
84 +)))|(% style="width:330px" %)(((
85 +LoRaWAN RS485 Modbus Converter
86 +)))|(% style="width:445px" %)(((
87 +RS485-LN v1.3 <~-~-> DR-LWS-005;
88 +)))
89 +|(% style="width:187px" %)(((
90 +[[LHT65>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/151-lht65.html]],
91 +)))|(% style="width:330px" %)(((
92 +LoRaWAN Temperature & Humidity Sensor
93 +)))|(% style="width:445px" %)(((
94 +(((
95 +LHT65 v1.7 <~-~-> DR-LWS-003;
96 +)))
97 +
98 +(((
99 +(((
38 38  LHT65 v1.8.0 <~-~-> DR-LWS-005;~-~-> Support since this version
39 39  )))
102 +)))
103 +)))
40 40  
105 +
106 +
41 41  = 4. System Management Commands =
42 42  
109 +
43 43  == 4.1 Change Uplink Interval ==
44 44  
112 +
45 45  Feature: Change LoRaWAN End Node Transmit Interval.
46 46  
47 -(% class="box infomessage" %)
48 -(((
49 -**AT Command: AT+TDC**
50 -)))
115 +(% style="color:blue" %)**AT Command: AT+TDC**
51 51  
52 52  (% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
53 53  |=(% colspan="3" style="width: 724px;" %)AT+TDC
... ... @@ -61,25 +61,32 @@
61 61  Set transmit interval to 60000ms = 60 seconds
62 62  )))
63 63  
64 -{{info}}
65 -**Downlink Command: 0x01**
66 -{{/info}}
129 +(((
130 +
67 67  
132 +(% style="color:blue" %)**Downlink Command: 0x01**
133 +
68 68  Format: Command Code (0x01) followed by 3 bytes time value.
135 +)))
69 69  
137 +(((
70 70  If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
139 +)))
71 71  
72 72  * **Example 1**: Downlink Payload:** 0100001E** ~/~/ Set Transmit Interval (TDC) = 30 seconds
73 73  * **Example 2**: Downlink Payload:** 0100003C** ~/~/ Set Transmit Interval (TDC) = 60 seconds
74 74  
144 +
145 +
75 75  == 4.2 Reboot End Node ==
76 76  
148 +
77 77  Feature: Reboot End Node to perform a new OTAA or ABP Join.
78 78  
79 -{{info}}
80 -**AT Command: ATZ**
81 -{{/info}}
82 82  
152 +(% style="color:blue" %)**AT Command: ATZ**
153 +
154 +
83 83  (% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
84 84  |=(% colspan="3" %)ATZ: Trig a reset of the MCU
85 85  |**Command Example**|**Function**|**Response**
... ... @@ -97,21 +97,26 @@
97 97  <followed by the Tx and Rx information>
98 98  )))
99 99  
100 -{{info}}
101 -**Downlink Command: 0x04**
102 -{{/info}}
103 103  
173 +(% style="color:blue" %)**Downlink Command: 0x04**
174 +
175 +
176 +(((
104 104  Format: Command Code (0x04) followed by FF.
178 +)))
105 105  
180 +(((
106 106  If the downlink payload=**04FF**, the end node will reboot.
107 107  
183 +
184 +)))
185 +
108 108  == 4.3 Reset to factory Default ==
109 109  
188 +
110 110  Feature: Reset the parameters to Factory Default, factory default value depends on the firmware settings, the OTAA and ABP keys will reserve after this command.
111 111  
112 -{{info}}
113 -**AT Command: AT+FDR**
114 -{{/info}}
191 +(% style="color:blue" %)**AT Command: AT+FDR**
115 115  
116 116  (% border="1" style="background-color:#ffffcc; color:green; width:831.222px" %)
117 117  |=(% colspan="3" style="width: 828px;" %)Reset to factory default
... ... @@ -130,13 +130,17 @@
130 130  Please set the parameters or reset Device to apply change
131 131  )))
132 132  
133 -{{info}}
134 -**Downlink Command: 0x04**
135 -{{/info}}
136 136  
211 +(% style="color:blue" %)**Downlink Command: 0x04**
212 +
213 +
214 +(((
137 137  Format: Command Code (0x04) followed by FE.
216 +)))
138 138  
218 +(((
139 139  If the downlink payload=**04FE**, Reset Parameters to Factory Default, Keys Reserve.
220 +)))
140 140  
141 141  
142 142  == 4.4 Show Firmware Version ==
... ... @@ -143,34 +143,42 @@
143 143  
144 144  Feature: Show firmware version. No downlink command yet.
145 145  
146 -{{info}}
147 -**AT Command: AT+VER**
148 -{{/info}}
149 149  
150 -(% border="1" style="background-color:#ffffcc; color:green" %)
151 -|=(% colspan="3" %)AT+VER: Image Version and Frequency Band
152 -|**Command Example**|**Function**|**Response**
153 -|AT+VER=?|Show Image version and Frequency Band|(((
228 +(% style="color:blue" %)**AT Command: AT+VER**
229 +
230 +
231 +(% border="1" style="background-color:#ffffcc; color:green; width:586px" %)
232 +|=(% colspan="3" style="width: 583px;" %)AT+VER: Image Version and Frequency Band
233 +|(% style="width:170px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:113px" %)**Response**
234 +|(% style="width:170px" %)AT+VER=?|(% style="width:300px" %)Show Image version and Frequency Band|(% style="width:113px" %)(((
154 154  1.3 EU868
155 155  
156 156  OK
157 157  )))
158 158  
159 -{{info}}
160 -**Downlink Command: 0x26 (Valid in 006 stack)**
161 -{{/info}}
162 162  
241 +(% style="color:blue" %)**Downlink Command: 0x26 (Valid in 006 stack)**
242 +
243 +
244 +(((
163 163  Downlink Format: 0x26
246 +)))
164 164  
248 +(((
165 165  Device will reply with firmware version info, device info. frequency band info. detail please check device user manual. Total 5 bytes Example: If device is of firmware version 1.1.0 Upload: xx ~-~- yy ~-~- zz ~-~- 110 total 5 bytes
250 +)))
166 166  
252 +(((
167 167  **xx: Software Type:**
254 +)))
168 168  
169 169  * 0x00 01: LGT92 Version
170 170  * 0x00 02: LBT1
171 171  * 0x00 03: LSE01/LDDS75/LDDS20/LSPH01/LLMS01/LSNPK01
172 172  
260 +(((
173 173  **yy: Frequency Band:**
262 +)))
174 174  
175 175  * 0x01: EU868
176 176  * 0x02: US915
... ... @@ -183,7 +183,9 @@
183 183  * 0x09: AS923-2
184 184  * 0xa0: AS923-3
185 185  
275 +(((
186 186  **zz: Subband**
277 +)))
187 187  
188 188  firmware version: v1.1.0 ~-~-> 110
189 189  
... ... @@ -192,10 +192,10 @@
192 192  
193 193  Feature: Show All configure. No downlink command yet.
194 194  
195 -{{info}}
196 -**AT Command: AT+CFG**
197 -{{/info}}
198 198  
287 +(% style="color:blue" %)**AT Command: AT+CFG**
288 +
289 +
199 199  (% border="1" style="background-color:#ffffcc; color:green; width:599.222px" %)
200 200  |=(% colspan="3" style="width: 596px;" %)AT+CFG: Print all configurations
201 201  |(% style="width:160px" %)**Command Example**|(% style="width:154px" %)**Function**|(% style="width:280px" %)**Response**
... ... @@ -219,10 +219,10 @@
219 219  
220 220  Feature: Get or Set the Application EUI.
221 221  
222 -{{info}}
223 -**AT Command: AT+APPEUI**
224 -{{/info}}
225 225  
314 +(% style="color:blue" %)**AT Command: AT+APPEUI**
315 +
316 +
226 226  (% border="1" style="background-color:#ffffcc; color:green; width:686.222px" %)
227 227  |=(% colspan="3" style="width: 683px;" %)AT+APPEUI
228 228  |(% style="width:305px" %)**Command Example**|(% style="width:186px" %)**Function**|(% style="width:191px" %)**Response**
... ... @@ -235,10 +235,10 @@
235 235  
236 236  Feature: Get or Set the Application Key.
237 237  
238 -{{info}}
239 -**AT Command: AT+APPKEY**
240 -{{/info}}
241 241  
330 +(% style="color:blue" %)**AT Command: AT+APPKEY**
331 +
332 +
242 242  (% border="1" style="background-color:#ffffcc; color:green; width:976.222px" %)
243 243  |=(% colspan="3" style="width: 973px;" %)AT+APPKEY
244 244  |(% style="width:441px" %)**Command Example**|(% style="width:180px" %)**Function**|(% style="width:350px" %)**Response**
... ... @@ -251,10 +251,10 @@
251 251  
252 252  Feature: Get or Set the Application Session Key.
253 253  
254 -{{info}}
255 -**AT Command: AT+APPSKEY**
256 -{{/info}}
257 257  
346 +(% style="color:blue" %)**AT Command: AT+APPSKEY**
347 +
348 +
258 258  (% border="1" style="background-color:#ffffcc; color:green; width:1040.22px" %)
259 259  |=(% colspan="3" style="width: 1037px;" %)AT+APPSKEY
260 260  |(% style="width:451px" %)**Command Example**|(% style="width:231px" %)**Function**|(% style="width:354px" %)**Response**
... ... @@ -269,10 +269,10 @@
269 269  
270 270  Feature: Get or Set the Device Address.
271 271  
272 -{{info}}
273 -**AT Command: AT+DADDR**
274 -{{/info}}
275 275  
364 +(% style="color:blue" %)**AT Command: AT+DADDR**
365 +
366 +
276 276  (% border="1" style="background-color:#ffffcc; color:green; width:795.222px" %)
277 277  |=(% colspan="3" style="width: 792px;" %)AT+DADDR
278 278  |(% style="width:192px" %)**Command Example**|(% style="width:241px" %)**Function**|(% style="width:359px" %)**Response**
... ... @@ -287,10 +287,10 @@
287 287  
288 288  Feature: Get or Set the Device EUI.
289 289  
290 -{{info}}
291 -**AT Command: AT+DEUI**
292 -{{/info}}
293 293  
382 +(% style="color:blue" %)**AT Command: AT+DEUI**
383 +
384 +
294 294  (% border="1" style="background-color:#ffffcc; color:green; width:1035.22px" %)
295 295  |=(% colspan="3" style="width: 1032px;" %)AT+DEUI
296 296  |(% style="width:250px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:634px" %)**Response**
... ... @@ -305,10 +305,10 @@
305 305  
306 306  Feature: Get or Set the Network ID.(You can enter this command change only after successful network connection)
307 307  
308 -{{info}}
309 -**AT Command: AT+NWKID**
310 -{{/info}}
311 311  
400 +(% style="color:blue" %)**AT Command: AT+NWKID**
401 +
402 +
312 312  (% border="1" style="background-color:#ffffcc; color:green; width:448.222px" %)
313 313  |=(% colspan="3" style="width: 445px;" %)AT+NWKID
314 314  |(% style="width:191px" %)**Command Example**|(% style="width:153px" %)**Function**|(% style="width:101px" %)**Response**
... ... @@ -321,10 +321,10 @@
321 321  
322 322  Feature: Get or Set the Network Session Key
323 323  
324 -{{info}}
325 -**AT Command: AT+NWKSKEY**
326 -{{/info}}
327 327  
416 +(% style="color:blue" %)**AT Command: AT+NWKSKEY**
417 +
418 +
328 328  (% border="1" style="background-color:#ffffcc; color:green; width:1017.22px" %)
329 329  |=(% colspan="3" style="width: 1014px;" %)AT+NWKSKEY
330 330  |(% style="width:455px" %)**Command Example**|(% style="width:215px" %)**Function**|(% style="width:343px" %)**Response**
... ... @@ -337,12 +337,14 @@
337 337  
338 338  == 6.1 Confirm Mode ==
339 339  
431 +=== AT+CFM command before DR-LWS007 software stack ===
432 +
340 340  Feature: Get or Set the confirmation mode (0-1).
341 341  
342 -{{info}}
343 -**AT Command: AT+CFM**
344 -{{/info}}
345 345  
436 +(% style="color:blue" %)**AT Command: AT+CFM**
437 +
438 +
346 346  (% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
347 347  |=(% colspan="3" style="width: 707px;" %)AT+CFM
348 348  |(% style="width:155px" %)**Command Example**|(% style="width:205px" %)**Function**|(% style="width:346px" %)**Response**
... ... @@ -352,7 +352,7 @@
352 352  |(% style="width:155px" %)AT+CFM=1|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)OK
353 353  |(% style="width:155px" %)AT+CFM=2|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)While Error in format, return AT_PARAM_ERROR
354 354  
355 -Downlink Command: 0x05
448 +(% style="color:blue" %)**Downlink Command: 0x05**
356 356  
357 357  Format: Command Code (0x05) followed by 2 bytes mode value.
358 358  
... ... @@ -361,14 +361,62 @@
361 361  * Example 1: Downlink Payload: 0501 ~/~/ Set AT+CFM=1
362 362  * Example 2: Downlink Payload: 0500 ~/~/ Set AT+CFM=0
363 363  
457 +=== AT+CFM command since DR-LWS007 software stack ===
458 +
459 +
460 +(% style="color:blue" %)**AT Command: AT+CFM**
461 +
462 +
463 +(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
464 +|=(% colspan="3" style="width: 707px;" %)AT+CFM
465 +|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
466 +|(% style="width:160px" %)(((
467 +AT+CFM=1,0,0
468 +
469 +value1
470 +)))|(% style="width:198px" %)confirmed uplink|(% style="width:349px" %)(((
471 +1
472 +
473 +OK
474 +)))
475 +|(% style="width:160px" %)(((
476 +AT+CFM=0,?,0
477 +
478 +value2
479 +)))|(% style="width:198px" %)set max retry , range: 0 ~~ 7|(% style="width:349px" %)(((
480 +0~~7
481 +
482 +OK
483 +)))
484 +|(% style="width:160px" %)(((
485 +AT+CFM=0,0,1
486 +
487 +value3
488 +)))|(% style="width:198px" %)uplink fcnt increase by 1 for each retry|(% style="width:349px" %)(((
489 +1
490 +
491 +OK
492 +)))
493 +
494 +
495 +(% style="color:blue" %)**Downlink Command: 0x05**
496 +
497 +
498 +Format: Command Code (0x05) followed by 2 bytes mode value.
499 +
500 +If the downlink payload=05010101, it means set end node to use confirm mode, while type code is 05.
501 +
502 +* Example 1: Downlink Payload: 05010101 ~/~/ Set AT+CFM=1,1,1
503 +* Example 2: Downlink Payload: 05000700 ~/~/ Set AT+CFM=0,7,0
504 +
364 364  == 6.2 Confirm Status ==
365 365  
366 366  Feature: Get confirmation status of the last AT+SEND (0-1).
367 367  
368 -{{info}}
369 -**AT Command: AT+CFS**
370 -{{/info}}
371 371  
510 +(% style="color:blue" %)**AT Command: AT+CFS**
511 +
512 +
372 372  (% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
373 373  |=(% colspan="3" style="width: 531px;" %)AT+CFS
374 374  |(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:178px" %)**Response**
... ... @@ -380,10 +380,10 @@
380 380  
381 381  Feature: Join network.
382 382  
383 -{{info}}
384 -**AT Command: AT+JOIN**
385 -{{/info}}
386 386  
525 +(% style="color:blue" %)**AT Command: AT+JOIN**
526 +
527 +
387 387  (% border="1" style="background-color:#ffffcc; color:green; width:647.222px" %)
388 388  |=(% colspan="3" style="width: 644px;" %)AT+JOIN
389 389  |(% style="width:163px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:334px" %)**Response**
... ... @@ -397,10 +397,10 @@
397 397  
398 398  Feature: Get or Set the Network Join Mode. (0: ABP, 1: OTAA).
399 399  
400 -{{info}}
401 -**AT Command: AT+NJM**
402 -{{/info}}
403 403  
542 +(% style="color:blue" %)**AT Command: AT+NJM**
543 +
544 +
404 404  (% border="1" style="background-color:#ffffcc; color:green; width:753.222px" %)
405 405  |=(% colspan="3" style="width: 750px;" %)AT+NJM
406 406  |(% style="width:162px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:361px" %)**Response**
... ... @@ -410,15 +410,15 @@
410 410  |(% style="width:162px" %)AT+NJM=0|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)OK
411 411  |(% style="width:162px" %)AT+NJM=2|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)While Error in format, return AT_PARAM_ERROR
412 412  
413 -{{info}}
414 -**Downlink Command: 0x20**
415 -{{/info}}
416 416  
555 +(% style="color:blue" %)**Downlink Command: 0x20**
556 +
557 +
417 417  Format: Command Code (0x20) followed by 1 bytes mode value.
418 418  
419 419  If the downlink payload=2000, it means set the Network Join Mode, while type code is 20.
420 420  
421 -* **Example 1: **Downlink Payload: **2000** ~/~/ Set AT+NJM=O
562 +* **Example 1: **Downlink Payload: **2000** ~/~/ Set AT+NJM=0
422 422  * **Example 2:** Downlink Payload: **2001** ~/~/ Set AT+NJM=1
423 423  
424 424  == 6.5 LoRa® Network Join Status ==
... ... @@ -425,10 +425,10 @@
425 425  
426 426  Feature: LoRa® Network Join Status.
427 427  
428 -{{info}}
429 -**AT Command: AT+NJS**
430 -{{/info}}
431 431  
570 +(% style="color:blue" %)**AT Command: AT+NJS**
571 +
572 +
432 432  (% border="1" style="background-color:#ffffcc; color:green; width:498.222px" %)
433 433  |=(% colspan="3" style="width: 495px;" %)AT+NJS
434 434  |(% style="width:169px" %)**Command Example**|(% style="width:164px" %)**Function**|(% style="width:161px" %)**Response**
... ... @@ -440,10 +440,10 @@
440 440  
441 441  Feature: Print Last Received Data in Raw Format<port:data>.
442 442  
443 -{{info}}
444 -**AT Command: AT+RECV**
445 -{{/info}}
446 446  
585 +(% style="color:blue" %)**AT Command: AT+RECV**
586 +
587 +
447 447  (% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
448 448  |=(% colspan="3" style="width: 584px;" %)AT+RECV
449 449  |(% style="width:161px" %)**Command Example**|(% style="width:272px" %)**Function**|(% style="width:150px" %)**Response**
... ... @@ -455,10 +455,10 @@
455 455  
456 456  Feature: Print Last Received Data in Binary Format<port:data>.
457 457  
458 -{{info}}
459 -**AT Command: AT+RECVB**
460 -{{/info}}
461 461  
600 +(% style="color:blue" %)**AT Command: AT+RECVB**
601 +
602 +
462 462  (% border="1" style="background-color:#ffffcc; color:green; width:793.222px" %)
463 463  |=(% colspan="3" style="width: 790px;" %)AT+RECVB
464 464  |(% style="width:173px" %)**Command Example**|(% style="width:497px" %)**Function**|(% style="width:120px" %)**Response**
... ... @@ -470,10 +470,10 @@
470 470  
471 471  Feature: Send Text Data<port:data>.
472 472  
473 -{{info}}
474 -**AT Command: AT+SEND**
475 -{{/info}}
476 476  
615 +(% style="color:blue" %)**AT Command: AT+SEND**
616 +
617 +
477 477  (% border="1" style="background-color:#ffffcc; color:green; width:991.222px" %)
478 478  |=(% colspan="3" style="width: 988px;" %)AT+SEND
479 479  |(% style="width:201px" %)**Command Example**|(% style="width:340px" %)**Function**|(% style="width:446px" %)**Response**
... ... @@ -489,10 +489,10 @@
489 489  
490 490  Feature: Send hexadecimal data along with the application port.
491 491  
492 -{{info}}
493 -**AT Command: AT+SENDB**
494 -{{/info}}
495 495  
634 +(% style="color:blue" %)**AT Command: AT+SENDB**
635 +
636 +
496 496  (% border="1" style="background-color:#ffffcc; color:green; width:1120.22px" %)
497 497  |=(% colspan="3" style="width: 1117px;" %)AT+SENDB
498 498  |(% style="width:257px" %)**Command Example**|(% style="width:406px" %)**Function**|(% style="width:453px" %)**Response**
... ... @@ -509,10 +509,10 @@
509 509  
510 510  Feature: Get or Set the Adaptive Data Rate setting. (0: off, 1: on).
511 511  
512 -{{info}}
513 -**AT Command: AT+ADR**
514 -{{/info}}
515 515  
654 +(% style="color:blue" %)**AT Command: AT+ADR**
655 +
656 +
516 516  (% border="1" style="background-color:#ffffcc; color:green; width:683.222px" %)
517 517  |=(% colspan="3" style="width: 680px;" %)AT+ADR
518 518  |(% style="width:162px" %)**Command Example**|(% style="width:266px" %)**Function**|(% style="width:250px" %)**Response**
... ... @@ -524,11 +524,11 @@
524 524  AT_PARAM_ERROR
525 525  )))
526 526  
527 -{{info}}
528 -**Downlink Command: 0x22**
529 -{{/info}}
530 530  
669 +(% style="color:blue" %)**Downlink Command: 0x22**
531 531  
671 +
672 +
532 532  If the downlink payload=2201, it means setting the adaptive data rate to 1, while type code is 22.
533 533  
534 534  * **Example 1**: Downlink Payload: **2201** ~/~/ Set AT+ADR=1.
... ... @@ -538,10 +538,10 @@
538 538  
539 539  Feature: Get or Set the Device Class(Currently only support class A, class C).
540 540  
541 -{{info}}
542 -**AT Command:AT+CLASS**
543 -{{/info}}
544 544  
683 +(% style="color:blue" %)**AT Command:AT+CLASS**
684 +
685 +
545 545  (% border="1" style="background-color:#ffffcc; color:green; width:507.222px" %)
546 546  |=(% colspan="3" style="width: 504px;" %)AT+CLASS
547 547  |(% style="width:163px" %)**Command Example**|(% style="width:166px" %)**Function**|(% style="width:175px" %)**Response**
... ... @@ -556,10 +556,10 @@
556 556  
557 557  Feature: Get or Set the ETSI Duty Cycle setting - 0=disable, 1=enable - Only for testing.
558 558  
559 -{{info}}
560 -**AT Command:AT+DCS**
561 -{{/info}}
562 562  
701 +(% style="color:blue" %)**AT Command:AT+DCS**
702 +
703 +
563 563  (% border="1" style="background-color:#ffffcc; color:green; width:515.222px" %)
564 564  |=(% colspan="3" style="width: 512px;" %)AT+DCS
565 565  |(% style="width:165px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:107px" %)**Response**
... ... @@ -574,10 +574,10 @@
574 574  
575 575  Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) . Note: while set Data Rate, please use set Adptive Data Rate, ADR=0 first. otherwise device will response to server's ADR command and change the DR to the setting from server
576 576  
577 -{{info}}
578 -**AT Command: AT+DR**
579 -{{/info}}
580 580  
719 +(% style="color:blue" %)**AT Command: AT+DR**
720 +
721 +
581 581  (% border="1" style="background-color:#ffffcc; color:green; width:466.222px" %)
582 582  |=(% colspan="3" style="width: 463px;" %)AT+DR
583 583  |(% style="width:156px" %)**Command Example**|(% style="width:167px" %)**Function**|(% style="width:140px" %)**Response**
... ... @@ -588,11 +588,11 @@
588 588  
589 589  )))
590 590  
591 -{{info}}
592 -**Downlink Command: 0x2200aaFF**
593 -{{/info}}
594 594  
733 +(% style="color:blue" %)**Downlink Command: 0x2200aaFF**
595 595  
735 +
736 +
596 596  If the downlink payload=220001FF, it means setting the data rate to 1, while type code is 22 00 aa FF.
597 597  
598 598  * **Example 1**: Downlink Payload: **220001FF** ~/~/ Set AT+DR=1.
... ... @@ -602,10 +602,10 @@
602 602  
603 603  Feature: Get or Set the Frame Counter Downlink.
604 604  
605 -{{info}}
606 -**AT Command:AT+FCD**
607 -{{/info}}
608 608  
747 +(% style="color:blue" %)**AT Command:AT+FCD**
748 +
749 +
609 609  (% border="1" style="background-color:#ffffcc; color:green; width:693.222px" %)
610 610  |=(% colspan="3" style="width: 690px;" %)AT+FCD
611 611  |(% style="width:162px" %)**Command Example**|(% style="width:258px" %)**Function**|(% style="width:269px" %)**Response**
... ... @@ -622,10 +622,10 @@
622 622  
623 623  Feature: Get or Set the Frame Counter Uplink.
624 624  
625 -{{info}}
626 -**AT Command:AT+FCU**
627 -{{/info}}
628 628  
767 +(% style="color:blue" %)**AT Command:AT+FCU**
768 +
769 +
629 629  (% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
630 630  |=(% colspan="3" style="width: 531px;" %)AT+FCU
631 631  |(% style="width:177px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:113px" %)**Response**
... ... @@ -640,10 +640,10 @@
640 640  
641 641  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 1 in ms.
642 642  
643 -{{info}}
644 -**AT Command:AT+JN1DL**
645 -{{/info}}
646 646  
785 +(% style="color:blue" %)**AT Command:AT+JN1DL**
786 +
787 +
647 647  (% border="1" style="background-color:#ffffcc; color:green; width:537.222px" %)
648 648  |=(% colspan="3" style="width: 534px;" %)AT+JN1DL
649 649  |(% style="width:164px" %)**Command Example**|(% style="width:229px" %)**Function**|(% style="width:140px" %)**Response**
... ... @@ -658,10 +658,10 @@
658 658  
659 659  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 2 in ms.
660 660  
661 -{{info}}
662 -**AT Command:AT+JN2DL**
663 -{{/info}}
664 664  
803 +(% style="color:blue" %)**AT Command:AT+JN2DL**
804 +
805 +
665 665  (% border="1" style="background-color:#ffffcc; color:green; width:538.222px" %)
666 666  |=(% colspan="3" style="width: 535px;" %)AT+JN2DL
667 667  |(% style="width:160px" %)**Command Example**|(% style="width:228px" %)**Function**|(% style="width:146px" %)**Response**
... ... @@ -674,12 +674,14 @@
674 674  
675 675  == 7.9 Public Network Mode ==
676 676  
677 -Feature: Get or Set the public network mode. (0: off, 1: on)
818 +Feature: Get or Set the public network mode. (0: off, 1: on). A Public LoRaWAN network use 0x34 as syncword. Default Settings; PNM=1
678 678  
679 -{{info}}
680 -**AT Command:AT+PNM**
681 -{{/info}}
820 +Notice: If user build their own LoRaWAN server but still use syncword=0x34, this is still considered a public LoRaWAN network
682 682  
822 +
823 +(% style="color:blue" %)**AT Command:AT+PNM**
824 +
825 +
683 683  (% border="1" style="background-color:#ffffcc; color:green; width:667.222px" %)
684 684  |=(% colspan="3" style="width: 664px;" %)AT+PNM
685 685  |(% style="width:166px" %)**Command Example**|(% style="width:225px" %)**Function**|(% style="width:272px" %)**Response**
... ... @@ -686,20 +686,25 @@
686 686  |(% style="width:166px" %)AT+PNM=?|(% style="width:225px" %)Get the public network mode.|(% style="width:272px" %)1(((
687 687  OK
688 688  )))
689 -|(% style="width:166px" %)AT+PNM=1|(% style="width:225px" %)Set the public network mode.|(% style="width:272px" %)(System will write new value to PNM)(((
832 +|(% style="width:166px" %)AT+PNM=1|(% style="width:225px" %)(((
833 +Set the public network mode.
834 +
835 +Set syncword=0x34
836 +)))|(% style="width:272px" %)(System will write new value to PNM)(((
690 690  OK
691 691  
692 692  
693 693  )))
841 +|(% style="width:166px" %)AT+PNM=0|(% style="width:225px" %)Set to use private network autoset syncword=0x12|(% style="width:272px" %)
694 694  
695 695  == 7.10 Receive Delay1 ==
696 696  
697 697  Feature: Get or Set the delay between the end of the Tx and the Rx Window 1 in ms
698 698  
699 -{{info}}
700 -**AT Command:AT+RX1DL**
701 -{{/info}}
702 702  
848 +(% style="color:blue" %)**AT Command:AT+RX1DL**
849 +
850 +
703 703  (% border="1" style="background-color:#ffffcc; color:green; width:408.222px" %)
704 704  |=(% colspan="3" style="width: 405px;" %)AT+RX1DL
705 705  |(% style="width:155px" %)**Command Example**|(% style="width:128px" %)**Function**|(% style="width:122px" %)**Response**
... ... @@ -710,14 +710,14 @@
710 710  
711 711  )))
712 712  
713 -== 7.11Receive Delay2 ==
861 +== 7.11 Receive Delay2 ==
714 714  
715 715  Feature: Get or Set the delay between the end of the Tx and the Rx Window 2 in ms
716 716  
717 -{{info}}
718 -**AT Command:AT+RX2DL**
719 -{{/info}}
720 720  
866 +(% style="color:blue" %)**AT Command:AT+RX2DL**
867 +
868 +
721 721  (% border="1" style="background-color:#ffffcc; color:green; width:481.222px" %)
722 722  |=(% colspan="3" style="width: 478px;" %)AT+RX2DL
723 723  |(% style="width:175px" %)**Command Example**|(% style="width:152px" %)**Function**|(% style="width:150px" %)**Response**
... ... @@ -732,10 +732,10 @@
732 732  
733 733  Feature: Get or Set the Rx2 window data rate (0-7 corresponding to DR_X)
734 734  
735 -{{info}}
736 -**AT Command:AT+RX2DR**
737 -{{/info}}
738 738  
884 +(% style="color:blue" %)**AT Command:AT+RX2DR**
885 +
886 +
739 739  (% border="1" style="background-color:#ffffcc; color:green; width:525.222px" %)
740 740  |=(% colspan="3" style="width: 522px;" %)AT+RX2DR
741 741  |(% style="width:160px" %)**Command Example**|(% style="width:232px" %)**Function**|(% style="width:130px" %)**Response**
... ... @@ -750,10 +750,10 @@
750 750  
751 751  Feature: Get or Set the Rx2 window frequency
752 752  
753 -{{info}}
754 -**AT Command:AT+RX2FQ**
755 -{{/info}}
756 756  
902 +(% style="color:blue" %)**AT Command:AT+RX2FQ**
903 +
904 +
757 757  (% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
758 758  |=(% colspan="3" style="width: 584px;" %)AT+RX2FQ
759 759  |(% style="width:183px" %)**Command Example**|(% style="width:240px" %)**Function**|(% style="width:160px" %)**Response**
... ... @@ -768,10 +768,10 @@
768 768  
769 769  Feature: Get or Set the Transmit Power(0-5, MAX:0, MIN:5, according to LoRaWAN Spec, or 40=10dB, 41 = 11dB, …, 50 = 20dB which is out of LoRaWAN spec. )
770 770  
771 -{{info}}
772 -**AT Command:AT+TXP**
773 -{{/info}}
774 774  
920 +(% style="color:blue" %)**AT Command:AT+TXP**
921 +
922 +
775 775  (% border="1" style="background-color:#ffffcc; color:green; width:465.222px" %)
776 776  |=(% colspan="3" style="width: 462px;" %)AT+TXP
777 777  |(% style="width:161px" %)**Command Example**|(% style="width:189px" %)**Function**|(% style="width:112px" %)**Response**
... ... @@ -793,10 +793,10 @@
793 793  
794 794  Feature: Get or Set the Rx2 window frequency
795 795  
796 -{{info}}
797 -**AT Command:AT+RSSI**
798 -{{/info}}
799 799  
945 +(% style="color:blue" %)**AT Command:AT+RSSI**
946 +
947 +
800 800  (% border="1" style="background-color:#ffffcc; color:green; width:557.222px" %)
801 801  |=(% colspan="3" style="width: 554px;" %)AT+RSSI
802 802  |(% style="width:164px" %)**Command Example**|(% style="width:289px" %)**Function**|(% style="width:100px" %)**Response**
... ... @@ -808,10 +808,10 @@
808 808  
809 809  Feature: Get the SNR of the last received packet
810 810  
811 -{{info}}
812 -**AT Command:AT+SNR**
813 -{{/info}}
814 814  
960 +(% style="color:blue" %)**AT Command:AT+SNR**
961 +
962 +
815 815  (% border="1" style="background-color:#ffffcc; color:green; width:571.222px" %)
816 816  |=(% colspan="3" style="width: 568px;" %)AT+SNR
817 817  |(% style="width:164px" %)**Command Example**|(% style="width:290px" %)**Function**|(% style="width:113px" %)**Response**
... ... @@ -823,10 +823,10 @@
823 823  
824 824  Feature: Get or set the application port.
825 825  
826 -{{info}}
827 -**AT Command: AT+PORT**
828 -{{/info}}
829 829  
975 +(% style="color:blue" %)**AT Command: AT+PORT**
976 +
977 +
830 830  (% border="1" style="background-color:#ffffcc; color:green; width:500.222px" %)
831 831  |=(% colspan="3" style="width: 497px;" %)AT+PORT
832 832  |(% style="width:157px" %)**Command Example**|(% style="width:204px" %)**Function**|(% style="width:135px" %)**Response**
... ... @@ -835,10 +835,10 @@
835 835  )))
836 836  |(% style="width:157px" %)AT+PORT=21|(% style="width:204px" %)Set the application port|(% style="width:135px" %)OK
837 837  
838 -{{info}}
839 -**Downlink Command: 0x23**
840 -{{/info}}
841 841  
987 +(% style="color:blue" %)**Downlink Command: 0x23**
988 +
989 +
842 842  Format: Command Code (0x23) followed by 1 bytes port value.
843 843  
844 844  If the downlink payload=2301, it means set the application port to 1, while type code is 23.
... ... @@ -850,10 +850,10 @@
850 850  
851 851  Feature:Get or Set Frequency (Unit: Hz) for Single Channel Mode.
852 852  
853 -{{info}}
854 -**AT Command: AT+CHS**
855 -{{/info}}
856 856  
1002 +(% style="color:blue" %)**AT Command: AT+CHS**
1003 +
1004 +
857 857  (% border="1" style="background-color:#ffffcc; color:green; width:603.222px" %)
858 858  |=(% colspan="3" style="width: 600px;" %)AT+CHS
859 859  |(% style="width:182px" %)**Command Example**|(% style="width:295px" %)**Function**|(% style="width:122px" %)**Response**
... ... @@ -907,12 +907,18 @@
907 907  )))
908 908  |(% style="width:163px" %)AT+RX1WTO=60|(% style="width:201px" %)Set RXwindows1 timeout|(% style="width:93px" %)OK
909 909  
910 -AT+RX1TWO is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
1058 +(((
1059 +**AT+RX1TWO** is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
1060 +)))
911 911  
912 -[[image:image-20220511120050-1.png]]
1062 +[[image:image-20220526162535-1.png]]
913 913  
1064 +(((
914 914  Increasing thisvalue is equal to extending the time that the receiving window is opened, butthe corresponding power consumption will also increase. Properly increasingthis value can increase the success rate of the downlink.
915 915  
1067 +
1068 +)))
1069 +
916 916  == 7.21 Get or Set RXwindows2 timeout ==
917 917  
918 918  Feature:Get or Set the number of symbols to detect and timeout from RXwindow2(0 to 255).
... ... @@ -997,6 +997,129 @@
997 997  * **Example 1**: Downlink Payload: **2101** ~/~/ set packet receiving response level to 1
998 998  * **Example 2**: Downlink Payload: **2102** ~/~/ set packet receiving response level to 2
999 999  
1154 +== 7.24 Controls NBTrans in unconfirmed uplink mode（LWS007 NBTrans:Set retransmission packets) ==
1155 +
1156 +{{info}}
1157 +**AT Command: AT+SETMAXNBTRANS **
1158 +{{/info}}
1159 +
1160 +(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1161 +|=(% colspan="3" style="width: 533px;" %)AT+**SETMAXNBTRANS**
1162 +|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1163 +|(% style="width:160px" %)**AT+SETMAXNBTRANS=1，0**|(% style="width:263px" %)Value1: set the maximum NBTrans.|(% style="width:109px" %)1(((
1164 +OK
1165 +)))
1166 +|(% style="width:160px" %)**AT+SETMAXNBTRANS=？，1**|(% style="width:263px" %)value2: 0: uplink fcnt doesn't change for each NBTrans; 1: uplink fcnt increase by 1 for each NBTrans.|(% style="width:109px" %)(((
1167 +1
1168 +
1169 +OK
1170 +)))
1171 +
1172 +{{info}}
1173 +**Downlink Command: 0x33**
1174 +{{/info}}
1175 +
1176 +Format: Command Code (0x33) followed by 2 bytes mode value.
1177 +
1178 +If the downlink payload=330100, it means set end node to use confirm mode, while type code is 33.
1179 +
1180 +* Example 1: Downlink Payload: 330100 ~/~/ Set AT+SETMAXNBTRANS=1,0
1181 +* Example 2: Downlink Payload: 330201 ~/~/ Set AT+SETMAXNBTRANS=2,1
1182 +
1183 +== 7.25 Device offline rejoining （LWS007) ==
1184 +
1185 +{{info}}
1186 +**AT Command: AT+DDETECT**
1187 +{{/info}}
1188 +
1189 +(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
1190 +|=(% colspan="3" style="width: 707px;" %)AT+**DDETECT**
1191 +|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
1192 +|(% style="width:160px" %)(((
1193 +AT+DDETECT=1,1440,2880
1194 +
1195 +value1
1196 +)))|(% style="width:198px" %)Enable online detect|(% style="width:349px" %)(((
1197 +1
1198 +
1199 +OK
1200 +)))
1201 +|(% style="width:160px" %)(((
1202 +AT+DDETECT=1,?,2880
1203 +
1204 +value2
1205 +)))|(% style="width:198px" %)Online detection packet sending time|(% style="width:349px" %)(((
1206 +
1207 +
1208 +OK
1209 +)))
1210 +|(% style="width:160px" %)(((
1211 +AT+DDETECT=1,1440,？
1212 +
1213 +value3
1214 +)))|(% style="width:198px" %)Process rejoin|(% style="width:349px" %)(((
1215 +
1216 +
1217 +OK
1218 +)))
1219 +
1220 +{{info}}
1221 +**Downlink Command: 0x33**
1222 +{{/info}}
1223 +
1224 +Format: Command Code (0x32) followed by 2 bytes mode value.
1225 +
1226 +If the downlink payload=320105A00B40, it means set end node to use confirm mode, while type code is 33.
1227 +
1228 +* Example 1: Downlink Payload: 320105A00B40 ~/~/ Set AT+DDETECT=1,1440,2880
1229 +
1230 +== 7.26 Request the server to send an ACK ==
1231 +
1232 +{{info}}
1233 +**AT Command: AT+PNACKMD**
1234 +{{/info}}
1235 +
1236 +(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1237 +|=(% colspan="3" style="width: 533px;" %)**AT+PNACKMD**
1238 +|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1239 +|(% style="width:160px" %)**AT+PNACKMD=1**|(% style="width:263px" %)If the node uploads the ACK as confirm, it will request the server to send an ACK. If the server ack is not received, the node will upload the packets that have not received the ACK the next time it receives the ACK|(% style="width:109px" %)1(((
1240 +OK
1241 +)))
1242 +|(% style="width:160px" %)**AT+PNACKMD=0**|(% style="width:263px" %)off request the server to send an ACK|(% style="width:109px" %)(((
1243 +0
1244 +
1245 +OK
1246 +)))
1247 +
1248 +== 7.27 Adjust network rejoining interval ==
1249 +
1250 +{{info}}
1251 +**AT Command: AT+RJTDC**
1252 +{{/info}}
1253 +
1254 +(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
1255 +|=(% colspan="3" style="width: 724px;" %)AT+RJTDC
1256 +|(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
1257 +|(% style="width:165px" %)AT+RJTDC=?|(% style="width:227px" %)Show the ReJoin data transmission interval in min|(% style="width:329px" %)30000(((
1258 +OK
1259 +
1260 +the interval is 30000ms = 30s
1261 +)))
1262 +|(% style="width:165px" %)AT+RJTDC=60000|(% style="width:227px" %)Set the ReJoin data transmission interval in min|(% style="width:329px" %)OK(((
1263 +Set the ReJoin data transmission interval to 60000ms = 60 seconds
1264 +)))
1265 +
1266 +{{info}}
1267 +**Downlink Command: 0x26**
1268 +{{/info}}
1269 +
1270 +Format: Command Code (0x26) followed by 2 bytes mode value.
1271 +
1272 +If the downlink payload=26000A, it means set end node to use confirm mode, while type code is 26.
1273 +
1274 +* Example 1: Downlink Payload: 26000A ~/~/ Set AT+RJTDC=10
1275 +* Example 2: Downlink Payload: 260002 ~/~/ Set AT+RJTDC=2
1276 +
1000 1000  = 8. AT Commands Combination =
1001 1001  
1002 1002  == 8.1 Set a fix RX2DR for downlink window ==
... ... @@ -1012,6 +1012,7 @@
1012 1012  
1013 1013  Same as:
1014 1014  
1015 -* AT+ADR=0 [[Reference>>http://8.211.40.43:8080/xwiki/bin/view/End%20Device%20AT%20Commands%20and%20Downlink%20Command/#Adaptive_Data_Rate]]
1016 -* AT+DR=5 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Data_Rate]]
1017 -* AT+TXP=0 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Transmit_Power]]
1292 +* AT+ADR=0  [[Reference>>||anchor="H7.1AdaptiveDataRate"]]
1293 +* AT+DR=5  [[Reference>>||anchor="H7.4DataRate"]]
1294 +* AT+TXP=0  [[Reference>>||anchor="H7.14TransmitPower"]]
1295 +~)~)~)
image-20220526162535-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +149.4 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0