Wiki source code of Connection to Senra

Last modified by Xiaoling on 2023/04/21 17:49

version	line-number	content
13.7	1	~ Table of Contents:
1.1	2
2.3	3	{{toc/}}
1.1	4
2.3	5
13.7	6	= 1. Introduction =
1.1	7
13.7	8
1.2	9	Here list some notice when connect to Senra.
1.1	10
13.2	11
13.7	12	= 2. Notice for Gateway =
1.1	13
13.7	14
1.2	15	(((
	16	After register an account in Senra, ask their support to approval your gateway: refer ths link [[https:~~/~~/docs.senraco.io/dev/gw/SemtechPacketForwarder/>>url:https://docs.senraco.io/dev/gw/SemtechPacketForwarder/]] for gateway instruction of Senra.
13.7	17
	18
1.2	19	)))
1.1	20
9.2	21	[[image:image-20220524181429-1.jpeg]]
1.1	22
2.5	23
1.2	24	Gateway Must be Approval
1.1	25
1.2	26	* The Gateway EUI must match the Approval Gateway EUI in above screen shot
	27	* The keep alive status set to 300 seconds. Default 30 seconds is too short to Senra
1.1	28
9.2	29	[[image:image-20220524181455-2.png]]
1.1	30
13.7	31
1.2	32	Configure the Gateway with correct settings.
1.1	33
13.7	34
1.2	35	Gateway should be Active after have internet connection. like below:
1.1	36
13.2	37	[[image:image-20220526114401-1.png\|\|height="395" width="1337"]]
1.1	38
1.2	39	Configure the Gateway with correct settings.
1.1	40
13.2	41
1.2	42
13.7	43	= 3. Notice for End node =
1.2	44
13.7	45	== 3.1 Set up for OTAA mode ==
1.2	46
13.7	47	== 3.2 Set up for ABP Mode ==
	48
	49
1.2	50	(((
2.4	51	(((
1.2	52	ABP Mode devices has to be IN868 frequency band as well, User can use ABP mode to update data.
	53	)))
2.4	54	)))
1.2	55
	56	(((
2.4	57	(((
13.7	58	For Dragino End Node, user can access to the device console and run AT Command "(% style="color:blue" %)AT+NJM=0(%%)" to set it to ABP mode.
1.2	59	)))
2.4	60	)))
1.2	61
	62	(((
2.4	63	(((
13.7	64	User can know the keys by run (% style="color:blue" %)AT+CFG.
	65
	66
1.2	67	)))
2.4	68	)))
1.2	69
9.2	70	[[image:image-20220524181520-4.png]]
1.2	71
	72	AT+CFG command output from End node
	73
	74	In Senra, need to create a ABP device
	75
9.2	76	[[image:image-20220524181532-5.png]]
1.2	77
	78	Create ABP Device
	79
13.5	80
13.9	81	(% style="color:blue" %)And input the keys:
1.2	82
13.11	83	* (% style="color:#037691" %)Device EUI : (%%) Use the value from AT+DEUI
1.2	84
13.11	85	* (% style="color:#037691" %)Device ADDR:(%%) Use the value from AT+DADDR
13.9	86
13.11	87	* (% style="color:#037691" %)Application session key: (%%) Use the value from AT+APPSKEY
	88
	89	* (% style="color:#037691" %)Network Session Key: (%%) Use the value from AT+NWKSKEY
	90
9.2	91	[[image:image-20220524181549-6.png]]
1.2	92
	93	Create ABP Device
	94
13.6	95
1.2	96	After Successfule uplink, User will be to see the activity:
	97
13.2	98	[[image:image-20220526114506-2.png]]
1.2	99
	100	ABP Device Info

Wiki source code of Connection to Senra

Applications

Navigation