Summary

• Page properties (1 modified, 0 added, 0 removed)
• Attachments (0 modified, 3 added, 0 removed)
  • image-20220526114401-1.png
  • image-20220526114506-2.png
  • image-20220526114540-3.png

Details

Page properties

Content

...	...	@@ -1,16 +1,21 @@
1		-**~ Contents:**
	1	+**~ Table of Contents:**
2	2
3	3	{{toc/}}
4	4
5	5
6		-= 1. Introduction =
	6	+= 1.  Introduction =
7	7
	8	+
8	8	Here list some notice when connect to Senra.
9	9
10		-= 2. Notice for Gateway =
11	11
	12	+= 2.  Notice for Gateway =
	13	+
	14	+
12	12	(((
13	13	After register an account in Senra, ask their support to approval your gateway: refer ths link [[https:~~/~~/docs.senraco.io/dev/gw/SemtechPacketForwarder/>>url:https://docs.senraco.io/dev/gw/SemtechPacketForwarder/]] for gateway instruction of Senra.
	17	+
	18	+
14	14	)))
15	15
16	16	[[image:image-20220524181429-1.jpeg]]
...	...	@@ -21,22 +21,30 @@
21	21	* The Gateway EUI must match the Approval Gateway EUI in above screen shot
22	22	* The keep alive status set to 300 seconds. Default 30 seconds is too short to Senra
23	23
	29	+
24	24	[[image:image-20220524181455-2.png]]
25	25
	32	+
26	26	Configure the Gateway with correct settings.
27	27
	35	+
28	28	Gateway should be Active after have internet connection. like below:
29	29
30		-[[image:image-20220524181508-3.png]]
	38	+[[image:image-20220526114401-1.png||height="395" width="1337"]]
31	31
32	32	Configure the Gateway with correct settings.
33	33
34		-= 3. Notice for End node =
35	35
36		-== 3.1 Set up for OTAA mode ==
37	37
38		-== 3.2 Set up for ABP Mode ==
	44	+= 3.  Notice for End node =
39	39
	46	+== 3.1  Set up for OTAA mode ==
	47	+
	48	+
	49	+
	50	+== 3.2  Set up for ABP Mode ==
	51	+
	52	+
40	40	(((
41	41	(((
42	42	ABP Mode devices has to be IN868 frequency band as well, User can use ABP mode to update data.
...	...	@@ -45,13 +45,15 @@
45	45
46	46	(((
47	47	(((
48		-For Dragino End Node, user can access to the device console and run AT Command "**AT+NJM=0**" to set it to ABP mode.
	61	+For Dragino End Node, user can access to the device console and run AT Command "(% style="color:blue" %)**AT+NJM=0**(%%)" to set it to ABP mode.
49	49	)))
50	50	)))
51	51
52	52	(((
53	53	(((
54		-User can know the keys by run **AT+CFG**.
	67	+User can know the keys by run (% style="color:blue" %)**AT+CFG**.
	68	+
	69	+
55	55	)))
56	56	)))
57	57
...	...	@@ -65,19 +65,21 @@
65	65
66	66	Create ABP Device
67	67
68		-And input the keys:
69	69
70		-* Device EUI : Use the value from AT+DEUI
71		-* Device ADDR: Use the value from AT+DADDR
72		-* Application session key: Use the value from AT+APPSKEY
73		-* Network Session Key: Use the value from AT+NWKSKEY
	84	+**(% style="color:blue" %)And input the keys:**
74	74
	86	+* **(% style="color:#037691" %)Device EUI : ** (%%) Use the value from AT+DEUI
	87	+* **(% style="color:#037691" %)Device ADDR:**(%%)  Use the value from AT+DADDR
	88	+* **(% style="color:#037691" %)Application session key:** (%%) Use the value from AT+APPSKEY
	89	+* **(% style="color:#037691" %)Network Session Key:** (%%) Use the value from AT+NWKSKEY
	90	+
75	75	[[image:image-20220524181549-6.png]]
76	76
77	77	Create ABP Device
78	78
	95	+
79	79	After Successfule uplink, User will be to see the activity:
80	80
81		-[[image:image-20220524181604-7.png]]
	98	+[[image:image-20220526114506-2.png]]
82	82
83	83	ABP Device Info

image-20220526114401-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+106.0 KB

Content

image-20220526114506-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+233.5 KB

Content

image-20220526114540-3.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+106.0 KB

Content