Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -1,21 +1,17 @@
1		-**~ Table of Contents:**
	1	+**~ Contents:**
2	2
3	3	{{toc/}}
4	4
5	5
6		-= 1.  Introduction =
	6	+= 1. Introduction =
7	7
8		-
9	9	Here list some notice when connect to Senra.
10	10
11	11
12		-= 2.  Notice for Gateway =
	11	+= 2. Notice for Gateway =
13	13
14		-
15	15	(((
16	16	After register an account in Senra, ask their support to approval your gateway: refer ths link [[https:~~/~~/docs.senraco.io/dev/gw/SemtechPacketForwarder/>>url:https://docs.senraco.io/dev/gw/SemtechPacketForwarder/]] for gateway instruction of Senra.
17		-
18		-
19	19	)))
20	20
21	21	[[image:image-20220524181429-1.jpeg]]
...	...	@@ -26,13 +26,10 @@
26	26	* The Gateway EUI must match the Approval Gateway EUI in above screen shot
27	27	* The keep alive status set to 300 seconds. Default 30 seconds is too short to Senra
28	28
29		-
30	30	[[image:image-20220524181455-2.png]]
31	31
32		-
33	33	Configure the Gateway with correct settings.
34	34
35		-
36	36	Gateway should be Active after have internet connection. like below:
37	37
38	38	[[image:image-20220526114401-1.png||height="395" width="1337"]]
...	...	@@ -40,16 +40,12 @@
40	40	Configure the Gateway with correct settings.
41	41
42	42
	36	+= 3. Notice for End node =
43	43
44		-= 3.  Notice for End node =
	38	+== 3.1 Set up for OTAA mode ==
45	45
46		-== 3.1  Set up for OTAA mode ==
	40	+== 3.2 Set up for ABP Mode ==
47	47
48		-
49		-
50		-== 3.2  Set up for ABP Mode ==
51		-
52		-
53	53	(((
54	54	(((
55	55	ABP Mode devices has to be IN868 frequency band as well, User can use ABP mode to update data.
...	...	@@ -58,15 +58,13 @@
58	58
59	59	(((
60	60	(((
61		-For Dragino End Node, user can access to the device console and run AT Command "(% style="color:blue" %)**AT+NJM=0**(%%)" to set it to ABP mode.
	50	+For Dragino End Node, user can access to the device console and run AT Command "**AT+NJM=0**" to set it to ABP mode.
62	62	)))
63	63	)))
64	64
65	65	(((
66	66	(((
67		-User can know the keys by run (% style="color:blue" %)**AT+CFG**.
68		-
69		-
	56	+User can know the keys by run **AT+CFG**.
70	70	)))
71	71	)))
72	72
...	...	@@ -80,19 +80,17 @@
80	80
81	81	Create ABP Device
82	82
	70	+And input the keys:
83	83
84		-**(% style="color:blue" %)And input the keys:**
	72	+* Device EUI : Use the value from AT+DEUI
	73	+* Device ADDR: Use the value from AT+DADDR
	74	+* Application session key: Use the value from AT+APPSKEY
	75	+* Network Session Key: Use the value from AT+NWKSKEY
85	85
86		-* **(% style="color:#037691" %)Device EUI : ** (%%) Use the value from AT+DEUI
87		-* **(% style="color:#037691" %)Device ADDR:**(%%)  Use the value from AT+DADDR
88		-* **(% style="color:#037691" %)Application session key:** (%%) Use the value from AT+APPSKEY
89		-* **(% style="color:#037691" %)Network Session Key:** (%%) Use the value from AT+NWKSKEY
90		-
91	91	[[image:image-20220524181549-6.png]]
92	92
93	93	Create ABP Device
94	94
95		-
96	96	After Successfule uplink, User will be to see the activity:
97	97
98	98	[[image:image-20220526114506-2.png]]