Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -1,17 +1,21 @@
1		-**~ Contents:**
	1	+**~ Table of Contents:**
2	2
3	3	{{toc/}}
4	4
5	5
6		-= 1. Introduction =
	6	+= 1.  Introduction =
7	7
	8	+
8	8	Here list some notice when connect to Senra.
9	9
10	10
11		-= 2. Notice for Gateway =
	12	+= 2.  Notice for Gateway =
12	12
	14	+
13	13	(((
14	14	After register an account in Senra, ask their support to approval your gateway: refer ths link [[https:~~/~~/docs.senraco.io/dev/gw/SemtechPacketForwarder/>>url:https://docs.senraco.io/dev/gw/SemtechPacketForwarder/]] for gateway instruction of Senra.
	17	+
	18	+
15	15	)))
16	16
17	17	[[image:image-20220524181429-1.jpeg]]
...	...	@@ -24,8 +24,10 @@
24	24
25	25	[[image:image-20220524181455-2.png]]
26	26
	31	+
27	27	Configure the Gateway with correct settings.
28	28
	34	+
29	29	Gateway should be Active after have internet connection. like below:
30	30
31	31	[[image:image-20220526114401-1.png||height="395" width="1337"]]
...	...	@@ -33,12 +33,16 @@
33	33	Configure the Gateway with correct settings.
34	34
35	35
36		-= 3. Notice for End node =
37	37
38		-== 3.1 Set up for OTAA mode ==
	43	+= 3.  Notice for End node =
39	39
40		-== 3.2 Set up for ABP Mode ==
41	41
	46	+== 3.1  Set up for OTAA mode ==
	47	+
	48	+
	49	+== 3.2  Set up for ABP Mode ==
	50	+
	51	+
42	42	(((
43	43	(((
44	44	ABP Mode devices has to be IN868 frequency band as well, User can use ABP mode to update data.
...	...	@@ -47,13 +47,15 @@
47	47
48	48	(((
49	49	(((
50		-For Dragino End Node, user can access to the device console and run AT Command "**AT+NJM=0**" to set it to ABP mode.
	60	+For Dragino End Node, user can access to the device console and run AT Command "(% style="color:blue" %)**AT+NJM=0**(%%)" to set it to ABP mode.
51	51	)))
52	52	)))
53	53
54	54	(((
55	55	(((
56		-User can know the keys by run **AT+CFG**.
	66	+User can know the keys by run (% style="color:blue" %)**AT+CFG**.
	67	+
	68	+
57	57	)))
58	58	)))
59	59
...	...	@@ -68,13 +68,14 @@
68	68	Create ABP Device
69	69
70	70
71		-And input the keys:
	83	+(% style="color:blue" %)**And input the keys:**
72	72
73		-* Device EUI : Use the value from AT+DEUI
74		-* Device ADDR: Use the value from AT+DADDR
75		-* Application session key: Use the value from AT+APPSKEY
76		-* Network Session Key: Use the value from AT+NWKSKEY
	85	+* (% style="color:#037691" %)**Device EUI : ** (%%) Use the value from AT+DEUI
	86	+* (% style="color:#037691" %)**Device ADDR:**(%%)  Use the value from AT+DADDR
	87	+* (% style="color:#037691" %)**Application session key:** (%%) Use the value from AT+APPSKEY
	88	+* (% style="color:#037691" %)**Network Session Key:** (%%) Use the value from AT+NWKSKEY
77	77
	90	+
78	78	[[image:image-20220524181549-6.png]]
79	79
80	80	Create ABP Device