Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -1,21 +1,16 @@
1		-**~ Table of Contents:**
	1	+**~ Contents:**
2	2
3	3	{{toc/}}
4	4
5	5
6		-= 1.  Introduction =
	6	+= 1. Introduction =
7	7
8		-
9	9	Here list some notice when connect to Senra.
10	10
	10	+= 2. Notice for Gateway =
11	11
12		-= 2.  Notice for Gateway =
13		-
14		-
15	15	(((
16	16	After register an account in Senra, ask their support to approval your gateway: refer ths link [[https:~~/~~/docs.senraco.io/dev/gw/SemtechPacketForwarder/>>url:https://docs.senraco.io/dev/gw/SemtechPacketForwarder/]] for gateway instruction of Senra.
17		-
18		-
19	19	)))
20	20
21	21	[[image:image-20220524181429-1.jpeg]]
...	...	@@ -28,25 +28,20 @@
28	28
29	29	[[image:image-20220524181455-2.png]]
30	30
31		-
32	32	Configure the Gateway with correct settings.
33	33
34		-
35	35	Gateway should be Active after have internet connection. like below:
36	36
37		-[[image:image-20220526114401-1.png||height="395" width="1337"]]
	30	+[[image:image-20220524181508-3.png]]
38	38
39	39	Configure the Gateway with correct settings.
40	40
	34	+= 3. Notice for End node =
41	41
	36	+== 3.1 Set up for OTAA mode ==
42	42
43		-= 3.  Notice for End node =
	38	+== 3.2 Set up for ABP Mode ==
44	44
45		-== 3.1  Set up for OTAA mode ==
46		-
47		-== 3.2  Set up for ABP Mode ==
48		-
49		-
50	50	(((
51	51	(((
52	52	ABP Mode devices has to be IN868 frequency band as well, User can use ABP mode to update data.
...	...	@@ -55,15 +55,13 @@
55	55
56	56	(((
57	57	(((
58		-For Dragino End Node, user can access to the device console and run AT Command "(% style="color:blue" %)**AT+NJM=0**(%%)" to set it to ABP mode.
	48	+For Dragino End Node, user can access to the device console and run AT Command "**AT+NJM=0**" to set it to ABP mode.
59	59	)))
60	60	)))
61	61
62	62	(((
63	63	(((
64		-User can know the keys by run (% style="color:blue" %)**AT+CFG**.
65		-
66		-
	54	+User can know the keys by run **AT+CFG**.
67	67	)))
68	68	)))
69	69
...	...	@@ -77,24 +77,19 @@
77	77
78	78	Create ABP Device
79	79
	68	+And input the keys:
80	80
81		-(% style="color:blue" %)**And input the keys:**
	70	+* Device EUI : Use the value from AT+DEUI
	71	+* Device ADDR: Use the value from AT+DADDR
	72	+* Application session key: Use the value from AT+APPSKEY
	73	+* Network Session Key: Use the value from AT+NWKSKEY
82	82
83		-* (% style="color:#037691" %)**Device EUI : ** (%%) Use the value from **AT+DEUI**
84		-
85		-* (% style="color:#037691" %)**Device ADDR:**(%%)  Use the value from **AT+DADDR**
86		-
87		-* (% style="color:#037691" %)**Application session key:** (%%) Use the value from **AT+APPSKEY**
88		-
89		-* (% style="color:#037691" %)**Network Session Key:** (%%) Use the value from **AT+NWKSKEY**
90		-
91	91	[[image:image-20220524181549-6.png]]
92	92
93	93	Create ABP Device
94	94
95		-
96	96	After Successfule uplink, User will be to see the activity:
97	97
98		-[[image:image-20220526114506-2.png]]
	81	+[[image:image-20220524181604-7.png]]
99	99
100	100	ABP Device Info