Connection to Senra

1

**~ Table of Contents:**

2

= 1. Introduction =

Here list some notice when connect to Senra.

10

11

12

= 2. Notice for Gateway =

(((

After register an account in Senra, ask their support to approval your gateway: refer ths link [[https:~~/~~/docs.senraco.io/dev/gw/SemtechPacketForwarder/>>url:https://docs.senraco.io/dev/gw/SemtechPacketForwarder/]] for gateway instruction of Senra.

author	version	line-number	content
		1	~ Table of Contents:
		2
		3	{{toc/}}
		4
		5
		6	= 1. Introduction =
		7
		8
		9	Here list some notice when connect to Senra.
		10
		11
		12	= 2. Notice for Gateway =
		13
		14
		15	(((
		16	After register an account in Senra, ask their support to approval your gateway: refer ths link [[https:~~/~~/docs.senraco.io/dev/gw/SemtechPacketForwarder/>>url:https://docs.senraco.io/dev/gw/SemtechPacketForwarder/]] for gateway instruction of Senra.
		17
		18
		19	)))
		20
		21	[[image:image-20220524181429-1.jpeg]]
		22
		23
		24	Gateway Must be Approval
		25
		26	* The Gateway EUI must match the Approval Gateway EUI in above screen shot
		27	* The keep alive status set to 300 seconds. Default 30 seconds is too short to Senra
		28
		29	[[image:image-20220524181455-2.png]]
		30
		31
		32	Configure the Gateway with correct settings.
		33
		34
		35	Gateway should be Active after have internet connection. like below:
		36
		37	[[image:image-20220526114401-1.png\|\|height="395" width="1337"]]
		38
		39	Configure the Gateway with correct settings.
		40
		41
		42
		43	= 3. Notice for End node =
		44
		45	== 3.1 Set up for OTAA mode ==
		46
		47	== 3.2 Set up for ABP Mode ==
		48
		49
		50	(((
		51	(((
		52	ABP Mode devices has to be IN868 frequency band as well, User can use ABP mode to update data.
		53	)))
		54	)))
		55
		56	(((
		57	(((
		58	For Dragino End Node, user can access to the device console and run AT Command "(% style="color:blue" %)AT+NJM=0(%%)" to set it to ABP mode.
		59	)))
		60	)))
		61
		62	(((
		63	(((
		64	User can know the keys by run (% style="color:blue" %)AT+CFG.
		65
		66
		67	)))
		68	)))
		69
		70	[[image:image-20220524181520-4.png]]
		71
		72	AT+CFG command output from End node
		73
		74	In Senra, need to create a ABP device
		75
		76	[[image:image-20220524181532-5.png]]
		77
		78	Create ABP Device
		79
		80
		81	(% style="color:blue" %)And input the keys:
		82
		83	* (% style="color:#037691" %)Device EUI : (%%) Use the value from AT+DEUI
		84
		85	* (% style="color:#037691" %)Device ADDR:(%%) Use the value from AT+DADDR
		86
		87	* (% style="color:#037691" %)Application session key: (%%) Use the value from AT+APPSKEY
		88
		89	* (% style="color:#037691" %)Network Session Key: (%%) Use the value from AT+NWKSKEY
		90
		91	[[image:image-20220524181549-6.png]]
		92
		93	Create ABP Device
		94
		95
		96	After Successfule uplink, User will be to see the activity:
		97
		98	[[image:image-20220526114506-2.png]]
		99
		100	ABP Device Info

Wiki source code of Connection to Senra

Applications

Navigation