Table of Contents:

1.  Introduction

Here list some notice when connect to Senet

2.  Semtech UDP

Here is how to create a gateway on senet. Here are the steps to create a gateway.

image-20220526115030-1.png

Location address

image-20220526115058-2.png

Gateway type

image-20220526115128-3.png

Gateway information

image-20220526115157-4.png

Installation information

Note:  After the gateway is created, the gateway EUI has not been obtained. You need to wait for the server to allocate the gateway EUI. At this time, you may need to wait several hour.

 

image-20220526115242-5.png

When you get the gateway EUI, you can see it in the mail or server.

image-20220525083604-6.png

Then enter the LORAWAN configuration, fill in the gateway ID and server address.

image-20220526115650-6.png

LORAWAN Configuration

Server successfully connected to gateway.

image-20220526115824-7.png

3.  Semtech Basic Station

3.1  Introduction

The Senet Network supports LoRa Gateway's running the Semtech BasicStation forwarder. This is a great place to start with development and initial integration.

Firmware version since: lgw-build-v5.4.1651822913

What do you need to prepare: A gateway that can access the internet normally

3.2  Register Gateway

Here is how to register a basic station gateway on senet. Here are the steps to create a gateway.

Enter your gateway located (custom)

image-20220525083714-9.png

Select the type of gateway: Semtech Basic Station

image-20220525083739-10.png

Enter Gateway EUI and select the desired frequency

image-20220525083805-11.png

Gateway information

image-20220525083904-12.png

Check the information about the register gateway

image-20220525083936-13.png

Click "Register", here been complete to register

3.2  Access the gateway GUI

Access the gateway GUI interface of LoRaWAN-->LoRaWAN -- Basic Station

image-20220601100807-1.png

User need to Choose the Senet , input Server URI and Upload the TLS Certificate

Service Provider                -->     Choose the Senet -- Basic Station

LNS URI                             -->     Enter the LNS URI address: wss://collector.senetco.io:6042

LNS TLS trust                     -->    Upload the TLS Certificate 

This is the TLS certificate that the user needs to download

For more information, see the Senet BasicStation documentation

image-20220601101244-2.png

image-20220601101528-3.png

3.3  Start Station

When the user has finished the configuration, Please click Sace&Apply to start station to connect Senet

3.4  Successful Connection

If user completes the above steps, which will see live date in the Senet.

image-20220525084103-16.png

3.5  Trouble Shooting

3.5.1 Why my gateway is showing offline on the Senet Console UI?

If the gateway does not receive any data packet within 10 minutes, the gateway status in the Senet platform is displayed as Offline.

This does not affect the normal use of the gateway, and when the node sends the packet again, the gateway status reshows as Active。

image-20221216175155-1.png

User can check the station log in the logread/system log page.

image-20220525084131-17.png

and recode the station log in the system/Recode log page.

image-20220525084148-18.png

4.  Gateway and device sending and receiving situation

image-20220526133543-1.png

Detailed status of the device sending and receiving packets

image-20220526133616-2.png

status

Channel frequency

image-20220526133722-3.png

channel

5.  Downlink

Downlink payload

image-20220525084348-22.png

Downlink

6.  Create LHT65 node

image-20220526133851-4.png

lht65

image-20220526134154-7.png

lht65

image-20220526134108-6.png

lht65

Payload uploaded by LHT65.

image-20220526134018-5.png

lht65

 

Tags:
    
Copyright ©2010-2022 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0