Last modified by Xiaoling on 2023/04/20 18:14
<
From version < 14.2 >
edited by Xiaoling
on 2022/05/31 10:07
To version < 16.3 >
edited by Xiaoling
on 2022/07/22 11:41
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,10 +1,12 @@
1 - **Contents:**
1 +**Table of Contents:**
2 2  
3 3  {{toc/}}
4 4  
5 5  
6 +
6 6  = 1. Introduction =
7 7  
9 +
8 8  The Dragino LoRaWAN gateway can commuicate with LoRaWAN ABP End Node without the need of LoRaWAN server. It can be used in some cases such as:
9 9  
10 10  * No internet connection.
... ... @@ -29,13 +29,15 @@
29 29  
30 30  (% class="box infomessage" %)
31 31  (((
32 -AT+NWKSKEY=72 32 63 95 dd 8f e2 b2 13 66 e4 35 93 8f 55 df
34 +**AT+NWKSKEY=72 32 63 95 dd 8f e2 b2 13 66 e4 35 93 8f 55 df
33 33  AT+APPSKEY=b3 17 f8 14 7a 43 27 8a 6a 31 c4 47 3d 55 5d 33
34 -AT+DADDR=2602111D
36 +AT+DADDR=2602111D**
35 35  )))
36 36  
37 37  (((
38 38  and we have the LG308 works and US915 band and support ABP decryption. User can input these keys in LG308 so the LG308 can communicate with LGT92.
41 +
42 +
39 39  )))
40 40  
41 41  We need to input above keys in LG308 and enable ABP decryption.
... ... @@ -47,6 +47,7 @@
47 47  
48 48  == 2.1 Upstream ==
49 49  
54 +
50 50  Now when this End Node (Dev Addr=2602111D) send a uplink packet. When this packet arrive LG308, LG308 will decode it and put the decode data on the file /var/iot/channels/2602111D . So we have this data for further process with other applications in LG308.
51 51  
52 52  (((
... ... @@ -55,7 +55,7 @@
55 55  
56 56  [[image:image-20220527161149-2.png]]
57 57  
58 -LG308 log by "logread -f" command
63 +LG308 log by "(% style="color:red" %)**logread -f**" (%%)command
59 59  
60 60  
61 61  The data of End Node is stored in the file /var/iot/channels/2602111D. We can use hexdump command to check it.
... ... @@ -68,9 +68,9 @@
68 68  000001c
69 69  )))
70 70  
71 -* RSSI: 4646 4646 4646 3946 = 0xFFFF FF9F : So RSSI = (0xFFFF FF9F - 0x100000000) = -97
72 -* SNR: 3030 3030 3030 3546 = 0x0000 005F = 95, need to divide 10 so SNR is 9.5
73 -* Payload: 0xcc0c 0b63 0266 017f ff7f ff00
76 +* **RSSI**: 4646 4646 4646 3946 = 0xFFFF FF9F : So RSSI = (0xFFFF FF9F - 0x100000000) = -97
77 +* **SNR**: 3030 3030 3030 3546 = 0x0000 005F = 95, need to divide 10 so SNR is 9.5
78 +* **Payload**: 0xcc0c 0b63 0266 017f ff7f ff00
74 74  
75 75  (% class="box" %)
76 76  (((
... ... @@ -84,12 +84,13 @@
84 84  
85 85  (% class="box" %)
86 86  (((
87 -(% style="color:#037691" %)**Notice 2**(%%): The upstream payload length should match the LoRaWAN length requirement (max length depends on Frequency and DR), otherwise the gateway can't decode the payload.
92 +(% style="color:red" %)**Notice 2**(%%): The upstream payload length should match the LoRaWAN length requirement (max length depends on Frequency and DR), otherwise the gateway can't decode the payload.
88 88  )))
89 89  
90 90  
91 91  === 2.2.1 Decode Method ===
92 92  
98 +
93 93  The decode methods: (% style="color:#037691" %)**ASCII String, Decode_LHT65**(%%) doesn't affect how the sensor data is stored, they are to define how should the sensor data to be sent.
94 94  
95 95  For example we have a LHT65 , works in ABP mode and gateway successful get the data, which are:
... ... @@ -102,6 +102,7 @@
102 102  000001c
103 103  )))
104 104  
111 +
105 105  If we choose ASCII decoder, the MQTT process will send out with mqtt-data:
106 106  
107 107  (% class="box" %)
... ... @@ -111,6 +111,7 @@
111 111  Sun Sep 27 04:33:16 2020 user.notice root: [IoT.MQTT]:mqtt_data[-m]: (% style="color:#037691" %)**ffffffe700000048ccd17fff7fff017fff7fff00**
112 112  )))
113 113  
121 +
114 114  If we choose Decode_LHT65, the MQTT process will send out with mqtt-data
115 115  
116 116  (% class="box" %)
... ... @@ -124,21 +124,27 @@
124 124  Above scripts are store in /etc/lora/decoder/. User can put their scripts here and select it in the UI.
125 125  
126 126  
135 +
127 127  === 2.2.2 How to Decode My End Node ===
128 128  
129 -1/ Configure the ABP keys for your end node in the gateway. enable ABP decode in Web UI
130 130  
131 -2/ Don't choose MQTT service, use LoRaWAN.
139 +**1.** Configure the ABP keys for your end node in the gateway. enable ABP decode in Web UI
132 132  
133 -3/ When your end node send a message to the gateway, there will be a file store in /var/iot/channels. full path should be /var/iot/channels/END_NODE_DEV_ADDR
141 +**2. **Don't choose MQTT service, use LoRaWAN.
134 134  
135 -4/ Use the /etc/lora/decoder/Dragino_LHT65 as template to decode your payload. This script is written in Lua language. User can manually call this script when you see the data file in /var/iot/channels by running:
143 +**3.** When your end node send a message to the gateway, there will be a file store in /var/iot/channels. full path should be /var/iot/channels/END_NODE_DEV_ADDR
136 136  
145 +**4.** Use the /etc/lora/decoder/Dragino_LHT65 as template to decode your payload. This script is written in Lua language. User can manually call this script when you see the data file in /var/iot/channels by running:
146 +
137 137  {{{/etc/lora/decoder/Dragino_LHT65 END_NODE_DEV_ADDR
138 138  }}}
139 139  
140 -5/ What you see as output is the MQTT data device will upload, user's end node has different payload compare with LHT65, most properly this file will report with error. User need to modify to match the actual payload. Some notice:
150 +**5.** What you see as output is the MQTT data device will upload, user's end node has different payload compare with LHT65, most properly this file will report with error. User need to modify to match the actual payload.
141 141  
152 +
153 +(% style="color:red" %)
154 +**Some notice:**
155 +
142 142  * RSSI and SNR are added when gateway receive the packet, so there is always this field.
143 143  * If you rename the file, please make it executable.
144 144  * See this link for lua.bit module: [[http:~~/~~/luaforge.net/projects/bit/>>url:http://luaforge.net/projects/bit/]]
... ... @@ -147,8 +147,10 @@
147 147  * User can use other language ,not limited to Lua, just make sure the return is what you want to send.
148 148  
149 149  
164 +
150 150  == 2.2 Downstream ==
151 151  
167 +
152 152  In LG308, we can create a file in the directory /var/iot/push for downstream purpose. We recommend using each command to generate this file. This file will be used for transmission and auto-deleted after used
153 153  
154 154  The file should use below format:
... ... @@ -159,29 +159,35 @@
159 159  
160 160  (% style="color:#037691" %)**dev_addr,imme/time,txt/hex,payload,txpw,txbw,SF,frequency,rxwindow**
161 161  
162 -* dev_addr: Inptu the device address
163 -* imme/time:
178 +* **dev_addr:** Inptu the device address
179 +* **imme/time:**
164 164  ** imme: send downstream immediately,For Class C end node.
165 165  ** time: send downstream after receive device's uplink. For Class A end node
166 -* txt/hex:
182 +* **txt/hex:**
167 167  ** txt: send payload in ASCII
168 168  ** hex: send payload in HEX
169 -* payload: payload to be sent, payload lenght should match the LoRaWAN protocol requirement.
170 -* txpw: Transmit Power. example: 20
171 -* txbw: bandwidth:
185 +* **payload: **payload to be sent, payload lenght should match the LoRaWAN protocol requirement.
186 +* **txpw:** Transmit Power. example: 20
187 +* **txbw:** bandwidth:
172 172  ** 1: 500 kHz
173 173  ** 2: 250 kHz
174 174  ** 3: 125 kHz
175 175  ** 4: 62.5 kHz
176 -* SF: Spreading Factor : SF7/SF8/SF9/SF10/SF11/SF12
177 -* Frequency: Transmit Frequency: example: 923300000
178 -* rxwindow: transmit on Rx1Window or Rx2Window.
192 +* **SF:** Spreading Factor : SF7/SF8/SF9/SF10/SF11/SF12
193 +* **Frequency:** Transmit Frequency: example: 923300000
194 +* **rxwindow:** transmit on Rx1Window or Rx2Window.
179 179  
180 -Completely exmaple:
181 181  
182 -* Old version: echo 018193F4,imme,hex,0101 > /var/iot/push/test
183 -* New version: echo 018193F4,imme,hex,0101,20,1,SF12,923300000,2 > /var/iot/push/test
184 184  
198 +
199 +(% style="color:blue" %)**Completely exmaple:**
200 +
201 +* **Old version:** echo 018193F4,imme,hex,0101 > /var/iot/push/test
202 +* **New version:** echo 018193F4,imme,hex,0101,20,1,SF12,923300000,2 > /var/iot/push/test
203 +
204 +
205 +
206 +
185 185  (% style="color:#037691" %)**Downstream Frequency**
186 186  
187 187  The LG308 will use the RX2 window info to send the downstream payload, use the default LoRaWAN settings, as below:
... ... @@ -195,6 +195,9 @@
195 195  * IN865: 866.55Mhz, SF10 BW125
196 196  * RU864: 869.1Mhz, SF12 BW125
197 197  
220 +
221 +
222 +
198 198  (% style="color:#037691" %)**Examples:**
199 199  
200 200  (% class="box" %)
... ... @@ -205,7 +205,7 @@
205 205  
206 206  (% class="box" %)
207 207  (((
208 -1) From logread -f of gateway, we can see it has been added as pedning.
233 +**1)** From logread -f of gateway, we can see it has been added as pedning.
209 209  lora_pkt_fwd[4286]: INFO~~ [DNLK]Looking file : test
210 210  lora_pkt_fwd[4286]: INFO~~ [DNLK]devaddr:2602111D, txmode:time, pdfm:hex, size:4, payload1:4Vx,payload_hex:77C1BB90
211 211  lora_pkt_fwd[4286]: INFO~~ [DNLK] DNLINK PENDING!(1 elems).
... ... @@ -213,7 +213,7 @@
213 213  
214 214  (% class="box" %)
215 215  (((
216 -2) When there is an upstrea from end node, this downstream will be sent and shows:
241 +**2)** When there is an upstrea from end node, this downstream will be sent and shows:
217 217  lora_pkt_fwd[4286]: INFO: tx_start_delay=1497 (1497.000000) - (1497, bw_delay=0.000000, notch_delay=0.000000)
218 218  lora_pkt_fwd[4286]: [LGWSEND]lgw_send done: count_us=3537314420, freq=923300000, size=17
219 219  )))
... ... @@ -220,7 +220,7 @@
220 220  
221 221  (% class="box" %)
222 222  (((
223 -3) and the end node will got:
248 +**3)** and the end node will got:
224 224  [5764825]~*~*~*~** UpLinkCounter= 98 ~*~*~*~**
225 225  [5764827]TX on freq 905300000 Hz at DR 0
226 226  Update Interval: 60000 ms
... ... @@ -236,7 +236,7 @@
236 236  
237 237  (% class="box" %)
238 238  (((
239 -4) If we use the command "echo 2602111D,time,txt,12345678 > /var/iot/push/test" for downstream, the end node will got:
264 +**4) **If we use the command "echo 2602111D,time,txt,12345678 > /var/iot/push/test" for downstream, the end node will got:
240 240  [5955877]~*~*~*~** UpLinkCounter= 102 ~*~*~*~**
241 241  [5955879]TX on freq 904100000 Hz at DR 0
242 242  Update Interval: 60000 ms
... ... @@ -253,11 +253,12 @@
253 253  
254 254  = 3. Example 1: Communicate with LT-22222-L =
255 255  
281 +
256 256  Script can be download from: [[Example Script 1>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/customized_script/&file=talk_to_lt-22222-l_v0.1.sh]]
257 257  
258 258  (% class="box" %)
259 259  (((
260 -#!/bin/sh
286 +//#!/bin/sh
261 261  # This scripts shows how to use LPS8/LG308/DLOS8 to communicate with two LoRaWAN End Nodes, without the use of internet or LoRaWAN server
262 262  #
263 263  # Hardware Prepare:
... ... @@ -290,10 +290,10 @@
290 290  #  Device1: DI1: ON, DI2: ON , DO1: ON,  DO2: ON
291 291  #  Device2: DI1: OFF, DI2: OFF , DO1: ON,  DO2: ON
292 292  #  So if a person is in the Device 1 location, he can check if the DO LED match DI LEDs on Device 1 to confirm
293 -#  whether the Device 2 has been changed.
319 +#  whether the Device 2 has been changed.//
294 294  )))
295 295  
296 -~1. Input keys
322 +**~1. Input keys**
297 297  
298 298  [[image:image-20220527162450-3.png]]
299 299  
... ... @@ -300,9 +300,9 @@
300 300  Input Keys in LPS8
301 301  
302 302  
303 -2. Make sure the LPS8 and LT use the same frequency bands, choose EU868 in this test.
329 +**2. Make sure the LPS8 and LT use the same frequency bands, choose EU868 in this test.**
304 304  
305 -3. Choose Built-in server
331 +**3. Choose Built-in server**
306 306  
307 307  [[image:image-20220527162518-4.png]]
308 308  
... ... @@ -309,7 +309,7 @@
309 309  Choose Built-in server
310 310  
311 311  
312 -4. Run the script.
338 +**4. Run the script.**
313 313  
314 314  [[image:image-20220527162552-5.png]]
315 315  
... ... @@ -316,7 +316,7 @@
316 316  Run the script
317 317  
318 318  
319 -5. Output:
345 +**5. Output:**
320 320  
321 321  [[image:image-20220527162619-6.png]]
322 322  
... ... @@ -325,6 +325,7 @@
325 325  
326 326  = 4. Example 2: Communicate to TCP Server =
327 327  
354 +
328 328  [[image:image-20220527162648-7.png]]
329 329  
330 330  Network Structure
... ... @@ -338,6 +338,7 @@
338 338  
339 339  (% style="color:red" %)**Note: Firmware version must be higher than lgw-5.4.1607519907**
340 340  
368 +
341 341  Assume we already set up ABP keys in the gateway:
342 342  
343 343  [[image:image-20220527162852-8.png]]
... ... @@ -345,8 +345,9 @@
345 345  Input Keys in LPS8
346 346  
347 347  
348 -run socket tool in PC
349 349  
377 +**run socket tool in PC**
378 +
350 350  [[image:image-20220527163028-9.png]]
351 351  
352 352  
... ... @@ -353,17 +353,20 @@
353 353  Socket tool
354 354  
355 355  
356 -Input Server address and port
357 357  
386 +**Input Server address and port**
387 +
358 358  [[image:image-20220527163106-10.png]]
359 359  
360 360  Input Server address and port
361 361  
362 362  
363 -See value receive in socket tool. :
364 364  
394 +**See value receive in socket tool:**
395 +
365 365  [[image:image-20220527163144-11.png]]
366 366  
367 367  value receive in socket tool
368 368  
400 +
369 369  If user want to modify the TCP connection method. He can refer: [[https:~~/~~/github.com/dragino/dragino-packages/blob/lg02/haserl-ui/root/usr/bin/tcp_process.sh>>url:https://github.com/dragino/dragino-packages/blob/lg02/haserl-ui/root/usr/bin/tcp_process.sh]]. Same script is on /usr/bin of gateway.

Applications

Navigation

Copyright ©2010-2022 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0