Skip to Content

Changes for page Change Gateway Power

Last modified by Xiaoling on 2022/08/10 15:18
From version 8.1
edited by Edwin Chen
on 2022/06/23 09:42
Change comment: There is no comment for this version
To version 1.5
edited by Xiaoling
on 2022/05/14 13:46
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Edwin
1 +XWiki.Xiaoling
Content
... ... @@ -1,20 +1,16 @@
1 -(% class="wikigeneratedid" %)
2 -= Overview: =
1 += Introduction =
3 3  
4 -In LoRaWAN protocol, the gateway transmit packet use the output power base on the Power Index from LoRaWAN server downlink. for example: LoRaWAN server send downlink with this info "rf_power=14", gatewat got this info and it will search the index for rf_power=14 and use the related rf setting to set output power. In some case, the LoRaWAN server might set the rf-power to a quite low value ( for example 0dB) which is not practical for use. In such case, User can manunal change the rf_power=0's rf settings to a higher power out. Below are the methods.
5 -
6 -
7 -= Change Power for Semtech UDP Paket forward connection =
8 -
9 -----
10 -
3 +(((
11 11  In LoRaWAN protocol, the gateway output power refer to the downstream packets sent by Gateway. This output power is controlled by LoRaWAN server.
5 +)))
12 12  
7 +(((
13 13  Gateway maintain a power index in the file: /etc/lora/global_conf.json for example:
9 +)))
14 14  
15 -
16 16  (% class="box" %)
17 17  (((
13 +(((
18 18  "tx_lut_3": {
19 19   "desc": "TX gain table, index 3",        ~/~/ Index 3 refer to rf_power: 15dB. device will set the pa_gain,mix_gain,dig_gain 
20 20   "pa_gain": 2,                            ~/~/ to the value mentioned here so to generate 15dB output power.
... ... @@ -29,16 +29,16 @@
29 29   "rf_power": 16,
30 30   "dig_gain": 0
31 31  )))
28 +)))
32 32  
33 -(% class="mark" %)Note: If when lorawan server specify a rf_power which is not list above. gateway will choose the closest power. profile.
34 -
35 -
30 +(((
36 36  When LoRaWAN server sends a downlink stream, server will also ask the gateway to use which rf_power as output. So user don't need to consider to control in the gateway side.
32 +)))
37 37  
38 -If user want to always use a higher power or a lower power. User can modify the pa_gain,mix_gain,dig_gain for specify rf_power to achieve this purpose. This is not recommended, because this might break the regulator for specific country.
34 +(((
35 +If user want to always use a higher power or a lower power. User can modify the pa_gain,mix_gain,dig_gain for specify rf_power to achieve this purpose. This is not recommend, because this might break the regulator for specify country.
36 +)))
39 39  
40 -Please note, that the global_conf.json file will be overwritten by the match region files in /etc/lora/cfg-30x when changing settings in the web. So user needs to change the files in /etc/lora/cfg-cfg-30x instead of global_conf.json
41 -
42 -
43 -
44 -= Change Power for LoRaWAN Basic Station connection =
38 +(((
39 +Please note, the global_conf.json file will be overwrite by the match region files in /etc/lora/cfg-30x when change settings in the web. So user need to change the files in /etc/lora/cfg-cfg-30x instead of global_conf.json
40 +)))