Skip to Content

Changes for page Change Gateway Power

Last modified by Xiaoling on 2022/08/10 15:18
From version 6.1
edited by Edwin Chen
on 2022/06/20 17:46
Change comment: There is no comment for this version
To version 1.7
edited by Xiaoling
on 2022/05/14 13:47
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Edwin
1 +XWiki.Xiaoling
Content
... ... @@ -1,14 +1,16 @@
1 1  = Introduction =
2 2  
3 -----
4 -
3 +(((
5 5  In LoRaWAN protocol, the gateway output power refer to the downstream packets sent by Gateway. This output power is controlled by LoRaWAN server.
5 +)))
6 6  
7 +(((
7 7  Gateway maintain a power index in the file: /etc/lora/global_conf.json for example:
9 +)))
8 8  
9 -
10 10  (% class="box" %)
11 11  (((
13 +(((
12 12  "tx_lut_3": {
13 13   "desc": "TX gain table, index 3",        ~/~/ Index 3 refer to rf_power: 15dB. device will set the pa_gain,mix_gain,dig_gain 
14 14   "pa_gain": 2,                            ~/~/ to the value mentioned here so to generate 15dB output power.
... ... @@ -23,12 +23,24 @@
23 23   "rf_power": 16,
24 24   "dig_gain": 0
25 25  )))
28 +)))
26 26  
27 -(% class="mark" %)Note: If when lorawan server specify a rf_power which is not list above. gateway will choose the closest power. profile.
30 +(((
31 +When LoRaWAN server sends a downlink stream, server will also ask the gateway to use which rf_power as output. So user don't need to consider to control in the gateway side.
32 +)))
28 28  
34 +(((
35 +
36 +)))
29 29  
30 -When LoRaWAN server sends a downlink stream, server will also ask the gateway to use which rf_power as output. So user don't need to consider to control in the gateway side.
38 +(((
39 +If user want to always use a higher power or a lower power. User can modify the pa_gain,mix_gain,dig_gain for specify rf_power to achieve this purpose. This is not recommend, because this might break the regulator for specify country.
40 +)))
31 31  
32 -If user want to always use a higher power or a lower power. User can modify the pa_gain,mix_gain,dig_gain for specify rf_power to achieve this purpose. This is not recommended, because this might break the regulator for specific country.
42 +(((
43 +
44 +)))
33 33  
34 -Please note, that the global_conf.json file will be overwritten by the match region files in /etc/lora/cfg-30x when changing settings in the web. So user needs to change the files in /etc/lora/cfg-cfg-30x instead of global_conf.json
46 +(((
47 +Please note, the global_conf.json file will be overwrite by the match region files in /etc/lora/cfg-30x when change settings in the web. So user need to change the files in /etc/lora/cfg-cfg-30x instead of global_conf.json
48 +)))